mac80211: make CQM RSSI support per virtual interface

Similar to the previous beacon filtering patch,
make CQM RSSI support depend on the flags that
the driver set for virtual interfaces.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

6 files changed, 16 insertions, 24 deletions

diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c
index 86540db6f1a8..41302c7b1ad0 100644
--- a/drivers/net/wireless/wl1251/main.c
+++ b/drivers/net/wireless/wl1251/main.c
@@ -514,7 +514,8 @@ static int wl1251_op_add_interface(struct ieee80211_hw *hw,
 	struct wl1251 *wl = hw->priv;
 	int ret = 0;
 
-	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER;
+	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
+			     IEEE80211_VIF_SUPPORTS_CQM_RSSI;
 
 	wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
 		     vif->type, vif->addr);
@@ -1340,8 +1341,7 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		IEEE80211_HW_SUPPORTS_PS |
-		IEEE80211_HW_SUPPORTS_UAPSD |
-		IEEE80211_HW_SUPPORTS_CQM_RSSI;
+		IEEE80211_HW_SUPPORTS_UAPSD;
 
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					 BIT(NL80211_IFTYPE_ADHOC);
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index afc5381f2870..f8748cedbae1 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2060,7 +2060,8 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 	u8 role_type;
 	bool booted = false;
 
-	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER;
+	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
+			     IEEE80211_VIF_SUPPORTS_CQM_RSSI;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
 		     ieee80211_vif_type_p2p(vif), vif->addr);
@@ -4904,7 +4905,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_SUPPORTS_UAPSD |
 		IEEE80211_HW_HAS_RATE_CONTROL |
 		IEEE80211_HW_CONNECTION_MONITOR |
-		IEEE80211_HW_SUPPORTS_CQM_RSSI |
 		IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 		IEEE80211_HW_SPECTRUM_MGMT |
 		IEEE80211_HW_AP_LINK_PS |
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ae8db247bdeb..650185876846 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -856,9 +856,14 @@ struct ieee80211_channel_switch {
  *
  * @IEEE80211_VIF_BEACON_FILTER: the device performs beacon filtering
  *	on this virtual interface to avoid unnecessary CPU wakeups
+ * @IEEE80211_VIF_SUPPORTS_CQM_RSSI: the device can do connection quality
+ *	monitoring on this virtual interface -- i.e. it can monitor
+ *	connection quality related parameters, such as the RSSI level and
+ *	provide notifications if configured trigger levels are reached.
  */
 enum ieee80211_vif_flags {
 	IEEE80211_VIF_BEACON_FILTER		= BIT(0),
+	IEEE80211_VIF_SUPPORTS_CQM_RSSI		= BIT(1),
 };
 
 /**
@@ -1119,11 +1124,6 @@ enum sta_notify_cmd {
  *      When this flag is set, signaling beacon-loss will cause an immediate
  *      change to disassociated state.
  *
- * @IEEE80211_HW_SUPPORTS_CQM_RSSI:
- *	Hardware can do connection quality monitoring - i.e. it can monitor
- *	connection quality related parameters, such as the RSSI level and
- *	provide notifications if configured trigger levels are reached.
- *
  * @IEEE80211_HW_NEED_DTIM_PERIOD:
  *	This device needs to know the DTIM period for the BSS before
  *	associating.
@@ -1167,7 +1167,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
 	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
 	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
-	IEEE80211_HW_SUPPORTS_CQM_RSSI			= 1<<20,
+	/* reuse bit 20 */
 	IEEE80211_HW_SUPPORTS_PER_STA_GTK		= 1<<21,
 	IEEE80211_HW_AP_LINK_PS				= 1<<22,
 	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
@@ -3408,7 +3408,7 @@ void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif);
  * @rssi_event: the RSSI trigger event type
  * @gfp: context flags
  *
- * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality
+ * When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality
  * monitoring is configured with an rssi threshold, the driver will inform
  * whenever the rssi level reaches the threshold.
  */
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d86730fe75c8..74c9301681e5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1873,7 +1873,6 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
 					 s32 rssi_thold, u32 rssi_hyst)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_vif *vif = &sdata->vif;
 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
 
@@ -1884,14 +1883,9 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
 	bss_conf->cqm_rssi_thold = rssi_thold;
 	bss_conf->cqm_rssi_hyst = rssi_hyst;
 
-	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) {
-		if (sdata->vif.type != NL80211_IFTYPE_STATION)
-			return -EOPNOTSUPP;
-		return 0;
-	}
-
 	/* tell the driver upon association, unless already associated */
-	if (sdata->u.mgd.associated)
+	if (sdata->u.mgd.associated &&
+	    sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)
 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM);
 
 	return 0;
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index e8868dae1c01..affe64be9092 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -257,8 +257,6 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf,
 		sf += snprintf(buf + sf, mxln - sf, "REPORTS_TX_ACK_STATUS\n");
 	if (local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
 		sf += snprintf(buf + sf, mxln - sf, "CONNECTION_MONITOR\n");
-	if (local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)
-		sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_CQM_RSSI\n");
 	if (local->hw.flags & IEEE80211_HW_SUPPORTS_PER_STA_GTK)
 		sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_PER_STA_GTK\n");
 	if (local->hw.flags & IEEE80211_HW_AP_LINK_PS)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b51eb49d8525..de3268c7be1e 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1043,7 +1043,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	bss_info_changed |= BSS_CHANGED_BSSID;
 
 	/* Tell the driver to monitor connection quality (if supported) */
-	if ((local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI) &&
+	if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
 	    bss_conf->cqm_rssi_thold)
 		bss_info_changed |= BSS_CHANGED_CQM;
 
@@ -1882,7 +1882,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 
 	if (bss_conf->cqm_rssi_thold &&
 	    ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
-	    !(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) {
+	    !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
 		int sig = ifmgd->ave_beacon_signal / 16;
 		int last_event = ifmgd->last_cqm_event_signal;
 		int thold = bss_conf->cqm_rssi_thold;