drm/atomic-helper: implementatations for legacy interfaces

Well, except page_flip since that requires async commit, which isn't
there yet.

For the functions which changes planes there's a bit of trickery
involved to keep the fb refcounting working. But otherwise fairly
straight-forward atomic updates.

The property setting functions are still a bit incomplete. Once we
have generic properties (e.g. rotation, but also all the properties
needed by the atomic ioctl) we need to filter those out and parse them
in the helper. Preferrably with the same function as used by the real
atomic ioctl implementation.

v2: Fixup kerneldoc, reported by Paulo.

v3: Add missing EXPORT_SYMBOL.

v4: We need to look at the crtc of the modeset, not some random
leftover one from a previous loop when udpating the connector->crtc
routing. Also push some local variables into inner loops to avoid
these kinds of bugs.

v5: Adjust semantics - drivers now own the atomic state upon
successfully synchronous commit.

v6: Use the set_crtc_for_plane function to assign the crtc, since
otherwise the book-keeping is off.

v7:
- Improve comments.
- Filter out the crtc of the ->set_config call when recomputing
  crtc_state->enabled: We should compute the same state, but not doing
  so will give us a good chance to catch bugs and inconsistencies -
  the atomic helper's atomic_check function re-validates this again.
- Fix the set_config implementation logic when disabling the crtc: We
  still need to update the output routing to disable all the
  connectors properly in the state. Caught by the atomic_check
  functions, so at least that part worked ;-) Also add some WARN_ONs
  to ensure ->set_config preconditions all apply.

v8: Fixup an embarrassing h/vdisplay mixup.

v9: Shuffled bad squash to the right patch, spotted by Daniel

v10: Use set_crtc_for_connector as suggested by Sean.

v11: Daniel Thompson noticed that my error handling is inconsistent
and that in a few cases I didn't handle fatal errors (i.e. not
-EDEADLK). Fix this by consolidate the ww mutex backoff handling
into one check in the fail: block and flatten the error control
flow everywhere else.

v12: Review and discussion with Sean:
- One spelling fix.
- Correctly skip the crtc from the set_config set when recomputing
  ->enable state. That should allow us to catch any bugs in higher
  levels in computing that state (which is supplied to the
  ->set_config implementation). I've screwed this up and Sean spotted
  that the current code is pointless.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

2 files changed, 531 insertions, 1 deletions

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index c4936bc4318e..077c792c46e0 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -86,6 +86,7 @@ steal_encoder(struct drm_atomic_state *state,
 	struct drm_crtc_state *crtc_state;
 	struct drm_connector *connector;
 	struct drm_connector_state *connector_state;
+	int ret;
 
 	/*
 	 * We can only steal an encoder coming from a connector, which means we
@@ -116,7 +117,9 @@ steal_encoder(struct drm_atomic_state *state,
 		if (IS_ERR(connector_state))
 			return PTR_ERR(connector_state);
 
-		connector_state->crtc = NULL;
+		ret = drm_atomic_set_crtc_for_connector(connector_state, NULL);
+		if (ret)
+			return ret;
 		connector_state->best_encoder = NULL;
 	}
 
@@ -1050,3 +1053,509 @@ void drm_atomic_helper_swap_state(struct drm_device *dev,
 	}
 }
 EXPORT_SYMBOL(drm_atomic_helper_swap_state);
+
+/**
+ * drm_atomic_helper_update_plane - Helper for primary plane update using atomic
+ * @plane: plane object to update
+ * @crtc: owning CRTC of owning plane
+ * @fb: framebuffer to flip onto plane
+ * @crtc_x: x offset of primary plane on crtc
+ * @crtc_y: y offset of primary plane on crtc
+ * @crtc_w: width of primary plane rectangle on crtc
+ * @crtc_h: height of primary plane rectangle on crtc
+ * @src_x: x offset of @fb for panning
+ * @src_y: y offset of @fb for panning
+ * @src_w: width of source rectangle in @fb
+ * @src_h: height of source rectangle in @fb
+ *
+ * Provides a default plane update handler using the atomic driver interface.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int drm_atomic_helper_update_plane(struct drm_plane *plane,
+				   struct drm_crtc *crtc,
+				   struct drm_framebuffer *fb,
+				   int crtc_x, int crtc_y,
+				   unsigned int crtc_w, unsigned int crtc_h,
+				   uint32_t src_x, uint32_t src_y,
+				   uint32_t src_w, uint32_t src_h)
+{
+	struct drm_atomic_state *state;
+	struct drm_plane_state *plane_state;
+	int ret = 0;
+
+	state = drm_atomic_state_alloc(plane->dev);
+	if (!state)
+		return -ENOMEM;
+
+	state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
+retry:
+	plane_state = drm_atomic_get_plane_state(state, plane);
+	if (IS_ERR(plane_state)) {
+		ret = PTR_ERR(plane_state);
+		goto fail;
+	}
+
+	ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
+	if (ret != 0)
+		goto fail;
+	plane_state->fb = fb;
+	plane_state->crtc_x = crtc_x;
+	plane_state->crtc_y = crtc_y;
+	plane_state->crtc_h = crtc_h;
+	plane_state->crtc_w = crtc_w;
+	plane_state->src_x = src_x;
+	plane_state->src_y = src_y;
+	plane_state->src_h = src_h;
+	plane_state->src_w = src_w;
+
+	ret = drm_atomic_commit(state);
+	if (ret != 0)
+		goto fail;
+
+	/* Driver takes ownership of state on successful commit. */
+	return 0;
+fail:
+	if (ret == -EDEADLK)
+		goto backoff;
+
+	drm_atomic_state_free(state);
+
+	return ret;
+backoff:
+	drm_atomic_legacy_backoff(state);
+	drm_atomic_state_clear(state);
+
+	/*
+	 * Someone might have exchanged the framebuffer while we dropped locks
+	 * in the backoff code. We need to fix up the fb refcount tracking the
+	 * core does for us.
+	 */
+	plane->old_fb = plane->fb;
+
+	goto retry;
+}
+EXPORT_SYMBOL(drm_atomic_helper_update_plane);
+
+/**
+ * drm_atomic_helper_disable_plane - Helper for primary plane disable using * atomic
+ * @plane: plane to disable
+ *
+ * Provides a default plane disable handler using the atomic driver interface.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int drm_atomic_helper_disable_plane(struct drm_plane *plane)
+{
+	struct drm_atomic_state *state;
+	struct drm_plane_state *plane_state;
+	int ret = 0;
+
+	state = drm_atomic_state_alloc(plane->dev);
+	if (!state)
+		return -ENOMEM;
+
+	state->acquire_ctx = drm_modeset_legacy_acquire_ctx(plane->crtc);
+retry:
+	plane_state = drm_atomic_get_plane_state(state, plane);
+	if (IS_ERR(plane_state)) {
+		ret = PTR_ERR(plane_state);
+		goto fail;
+	}
+
+	ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
+	if (ret != 0)
+		goto fail;
+	plane_state->fb = NULL;
+	plane_state->crtc_x = 0;
+	plane_state->crtc_y = 0;
+	plane_state->crtc_h = 0;
+	plane_state->crtc_w = 0;
+	plane_state->src_x = 0;
+	plane_state->src_y = 0;
+	plane_state->src_h = 0;
+	plane_state->src_w = 0;
+
+	ret = drm_atomic_commit(state);
+	if (ret != 0)
+		goto fail;
+
+	/* Driver takes ownership of state on successful commit. */
+	return 0;
+fail:
+	if (ret == -EDEADLK)
+		goto backoff;
+
+	drm_atomic_state_free(state);
+
+	return ret;
+backoff:
+	drm_atomic_legacy_backoff(state);
+	drm_atomic_state_clear(state);
+
+	/*
+	 * Someone might have exchanged the framebuffer while we dropped locks
+	 * in the backoff code. We need to fix up the fb refcount tracking the
+	 * core does for us.
+	 */
+	plane->old_fb = plane->fb;
+
+	goto retry;
+}
+EXPORT_SYMBOL(drm_atomic_helper_disable_plane);
+
+static int update_output_state(struct drm_atomic_state *state,
+			       struct drm_mode_set *set)
+{
+	struct drm_device *dev = set->crtc->dev;
+	struct drm_connector_state *conn_state;
+	int nconnectors = state->dev->mode_config.num_connector;
+	int ncrtcs = state->dev->mode_config.num_crtc;
+	int ret, i, j;
+
+	ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
+			       state->acquire_ctx);
+	if (ret)
+		return ret;
+
+	/* First grab all affected connector/crtc states. */
+	for (i = 0; i < set->num_connectors; i++) {
+		conn_state = drm_atomic_get_connector_state(state,
+							    set->connectors[i]);
+		if (IS_ERR(conn_state))
+			return PTR_ERR(conn_state);
+	}
+
+	for (i = 0; i < ncrtcs; i++) {
+		struct drm_crtc *crtc = state->crtcs[i];
+
+		if (!crtc)
+			continue;
+
+		ret = drm_atomic_add_affected_connectors(state, crtc);
+		if (ret)
+			return ret;
+	}
+
+	/* Then recompute connector->crtc links and crtc enabling state. */
+	for (i = 0; i < nconnectors; i++) {
+		struct drm_connector *connector;
+
+		connector = state->connectors[i];
+		conn_state = state->connector_states[i];
+
+		if (!connector)
+			continue;
+
+		if (conn_state->crtc == set->crtc) {
+			ret = drm_atomic_set_crtc_for_connector(conn_state,
+								NULL);
+			if (ret)
+				return ret;
+		}
+
+		for (j = 0; j < set->num_connectors; j++) {
+			if (set->connectors[j] == connector) {
+				ret = drm_atomic_set_crtc_for_connector(conn_state,
+									set->crtc);
+				if (ret)
+					return ret;
+				break;
+			}
+		}
+	}
+
+	for (i = 0; i < ncrtcs; i++) {
+		struct drm_crtc *crtc = state->crtcs[i];
+		struct drm_crtc_state *crtc_state = state->crtc_states[i];
+
+		if (!crtc)
+			continue;
+
+		/* Don't update ->enable for the CRTC in the set_config request,
+		 * since a mismatch would indicate a bug in the upper layers.
+		 * The actual modeset code later on will catch any
+		 * inconsistencies here. */
+		if (crtc == set->crtc)
+			continue;
+
+		crtc_state->enable =
+			drm_atomic_connectors_for_crtc(state, crtc);
+	}
+
+	return 0;
+}
+
+/**
+ * drm_atomic_helper_set_config - set a new config from userspace
+ * @set: mode set configuration
+ *
+ * Provides a default crtc set_config handler using the atomic driver interface.
+ *
+ * Returns:
+ * Returns 0 on success, negative errno numbers on failure.
+ */
+int drm_atomic_helper_set_config(struct drm_mode_set *set)
+{
+	struct drm_atomic_state *state;
+	struct drm_crtc *crtc = set->crtc;
+	struct drm_crtc_state *crtc_state;
+	struct drm_plane_state *primary_state;
+	int ret = 0;
+
+	state = drm_atomic_state_alloc(crtc->dev);
+	if (!state)
+		return -ENOMEM;
+
+	state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
+retry:
+	crtc_state = drm_atomic_get_crtc_state(state, crtc);
+	if (IS_ERR(crtc_state)) {
+		ret = PTR_ERR(crtc_state);
+		goto fail;
+	}
+
+	if (!set->mode) {
+		WARN_ON(set->fb);
+		WARN_ON(set->num_connectors);
+
+		crtc_state->enable = false;
+		goto commit;
+	}
+
+	WARN_ON(!set->fb);
+	WARN_ON(!set->num_connectors);
+
+	crtc_state->enable = true;
+	drm_mode_copy(&crtc_state->mode, set->mode);
+
+	primary_state = drm_atomic_get_plane_state(state, crtc->primary);
+	if (IS_ERR(primary_state)) {
+		ret = PTR_ERR(primary_state);
+		goto fail;
+	}
+
+	ret = drm_atomic_set_crtc_for_plane(primary_state, crtc);
+	if (ret != 0)
+		goto fail;
+	primary_state->fb = set->fb;
+	primary_state->crtc_x = 0;
+	primary_state->crtc_y = 0;
+	primary_state->crtc_h = set->mode->vdisplay;
+	primary_state->crtc_w = set->mode->hdisplay;
+	primary_state->src_x = set->x << 16;
+	primary_state->src_y = set->y << 16;
+	primary_state->src_h = set->mode->vdisplay << 16;
+	primary_state->src_w = set->mode->hdisplay << 16;
+
+commit:
+	ret = update_output_state(state, set);
+	if (ret)
+		goto fail;
+
+	ret = drm_atomic_commit(state);
+	if (ret != 0)
+		goto fail;
+
+	/* Driver takes ownership of state on successful commit. */
+	return 0;
+fail:
+	if (ret == -EDEADLK)
+		goto backoff;
+
+	drm_atomic_state_free(state);
+
+	return ret;
+backoff:
+	drm_atomic_legacy_backoff(state);
+	drm_atomic_state_clear(state);
+
+	/*
+	 * Someone might have exchanged the framebuffer while we dropped locks
+	 * in the backoff code. We need to fix up the fb refcount tracking the
+	 * core does for us.
+	 */
+	crtc->primary->old_fb = crtc->primary->fb;
+
+	goto retry;
+}
+EXPORT_SYMBOL(drm_atomic_helper_set_config);
+
+/**
+ * drm_atomic_helper_crtc_set_property - helper for crtc prorties
+ * @crtc: DRM crtc
+ * @property: DRM property
+ * @val: value of property
+ *
+ * Provides a default plane disablle handler using the atomic driver interface.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int
+drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
+				    struct drm_property *property,
+				    uint64_t val)
+{
+	struct drm_atomic_state *state;
+	struct drm_crtc_state *crtc_state;
+	int ret = 0;
+
+	state = drm_atomic_state_alloc(crtc->dev);
+	if (!state)
+		return -ENOMEM;
+
+	/* ->set_property is always called with all locks held. */
+	state->acquire_ctx = crtc->dev->mode_config.acquire_ctx;
+retry:
+	crtc_state = drm_atomic_get_crtc_state(state, crtc);
+	if (IS_ERR(crtc_state)) {
+		ret = PTR_ERR(crtc_state);
+		goto fail;
+	}
+
+	ret = crtc->funcs->atomic_set_property(crtc, crtc_state,
+					       property, val);
+	if (ret)
+		goto fail;
+
+	ret = drm_atomic_commit(state);
+	if (ret != 0)
+		goto fail;
+
+	/* Driver takes ownership of state on successful commit. */
+	return 0;
+fail:
+	if (ret == -EDEADLK)
+		goto backoff;
+
+	drm_atomic_state_free(state);
+
+	return ret;
+backoff:
+	drm_atomic_legacy_backoff(state);
+	drm_atomic_state_clear(state);
+
+	goto retry;
+}
+EXPORT_SYMBOL(drm_atomic_helper_crtc_set_property);
+
+/**
+ * drm_atomic_helper_plane_set_property - helper for plane prorties
+ * @plane: DRM plane
+ * @property: DRM property
+ * @val: value of property
+ *
+ * Provides a default plane disable handler using the atomic driver interface.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int
+drm_atomic_helper_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *property,
+				    uint64_t val)
+{
+	struct drm_atomic_state *state;
+	struct drm_plane_state *plane_state;
+	int ret = 0;
+
+	state = drm_atomic_state_alloc(plane->dev);
+	if (!state)
+		return -ENOMEM;
+
+	/* ->set_property is always called with all locks held. */
+	state->acquire_ctx = plane->dev->mode_config.acquire_ctx;
+retry:
+	plane_state = drm_atomic_get_plane_state(state, plane);
+	if (IS_ERR(plane_state)) {
+		ret = PTR_ERR(plane_state);
+		goto fail;
+	}
+
+	ret = plane->funcs->atomic_set_property(plane, plane_state,
+					       property, val);
+	if (ret)
+		goto fail;
+
+	ret = drm_atomic_commit(state);
+	if (ret != 0)
+		goto fail;
+
+	/* Driver takes ownership of state on successful commit. */
+	return 0;
+fail:
+	if (ret == -EDEADLK)
+		goto backoff;
+
+	drm_atomic_state_free(state);
+
+	return ret;
+backoff:
+	drm_atomic_legacy_backoff(state);
+	drm_atomic_state_clear(state);
+
+	goto retry;
+}
+EXPORT_SYMBOL(drm_atomic_helper_plane_set_property);
+
+/**
+ * drm_atomic_helper_connector_set_property - helper for connector prorties
+ * @connector: DRM connector
+ * @property: DRM property
+ * @val: value of property
+ *
+ * Provides a default plane disablle handler using the atomic driver interface.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int
+drm_atomic_helper_connector_set_property(struct drm_connector *connector,
+				    struct drm_property *property,
+				    uint64_t val)
+{
+	struct drm_atomic_state *state;
+	struct drm_connector_state *connector_state;
+	int ret = 0;
+
+	state = drm_atomic_state_alloc(connector->dev);
+	if (!state)
+		return -ENOMEM;
+
+	/* ->set_property is always called with all locks held. */
+	state->acquire_ctx = connector->dev->mode_config.acquire_ctx;
+retry:
+	connector_state = drm_atomic_get_connector_state(state, connector);
+	if (IS_ERR(connector_state)) {
+		ret = PTR_ERR(connector_state);
+		goto fail;
+	}
+
+	ret = connector->funcs->atomic_set_property(connector, connector_state,
+					       property, val);
+	if (ret)
+		goto fail;
+
+	ret = drm_atomic_commit(state);
+	if (ret != 0)
+		goto fail;
+
+	/* Driver takes ownership of state on successful commit. */
+	return 0;
+fail:
+	if (ret == -EDEADLK)
+		goto backoff;
+
+	drm_atomic_state_free(state);
+
+	return ret;
+backoff:
+	drm_atomic_legacy_backoff(state);
+	drm_atomic_state_clear(state);
+
+	goto retry;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_set_property);
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 9781ce739e10..8cd6fe7a48e5 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -49,4 +49,25 @@ void drm_atomic_helper_cleanup_planes(struct drm_device *dev,
 void drm_atomic_helper_swap_state(struct drm_device *dev,
 				  struct drm_atomic_state *state);
 
+/* implementations for legacy interfaces */
+int drm_atomic_helper_update_plane(struct drm_plane *plane,
+				   struct drm_crtc *crtc,
+				   struct drm_framebuffer *fb,
+				   int crtc_x, int crtc_y,
+				   unsigned int crtc_w, unsigned int crtc_h,
+				   uint32_t src_x, uint32_t src_y,
+				   uint32_t src_w, uint32_t src_h);
+int drm_atomic_helper_disable_plane(struct drm_plane *plane);
+int drm_atomic_helper_set_config(struct drm_mode_set *set);
+
+int drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
+					struct drm_property *property,
+					uint64_t val);
+int drm_atomic_helper_plane_set_property(struct drm_plane *plane,
+					struct drm_property *property,
+					uint64_t val);
+int drm_atomic_helper_connector_set_property(struct drm_connector *connector,
+					struct drm_property *property,
+					uint64_t val);
+
 #endif /* DRM_ATOMIC_HELPER_H_ */