summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-11-29 03:03:09 +0300
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-11-29 03:03:09 +0300
commitbb0851ff9dc65dd9c9365fdb87895d98235ac463 (patch)
treed19b7440bb5b0dec31cef2c384cccdd473f314e7
parent34f2c1c35ff014a5d145971e41caa940cd62d563 (diff)
parent5f629ad7e5f9b99c6d025bf199d402734bd72d0f (diff)
downloadlinux-bb0851ff9dc65dd9c9365fdb87895d98235ac463.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (25 commits) USB: s3c2410 gadget: ensure vbus pin in input mode during read USB: s3c2410 gadget: allow sharing of vbus irq USB: s3c2410 gadget: Header move fixups USB: usb-storage: unusual_devs entry for JetFlash TS1GJF2A USB: fix up EHCI startup synchronization USB: make the microtek driver and HAL cooperate USB: uevent environment key fix USB: keep track of whether interface sysfs files exist USB: sierra: new product id USB HCD: avoid duplicate local_irq_disable() USB: mailing lists have changed USB: remove USB HUB entry from MAINTAINERS USB: fix directory references in usb/README USB: add support for an older firmware revision for the Nikon D200 USB: FIx locks and urb->status in adutux (updated) USB: power-management documenation update USB: Fix signr comment in usbdevice_fs.h usbserial: fix inconsistent lock state USB: fix usbled disconnect read race #2 USB: free memory when writing fails in usb/serial/mos7840.c ...
-rw-r--r--Documentation/usb/power-management.txt8
-rw-r--r--MAINTAINERS101
-rw-r--r--drivers/usb/README6
-rw-r--r--drivers/usb/core/driver.c11
-rw-r--r--drivers/usb/core/hcd.c3
-rw-r--r--drivers/usb/core/hub.c2
-rw-r--r--drivers/usb/core/message.c36
-rw-r--r--drivers/usb/core/sysfs.c6
-rw-r--r--drivers/usb/core/usb.c25
-rw-r--r--drivers/usb/gadget/omap_udc.c6
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c16
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/image/microtek.c2
-rw-r--r--drivers/usb/misc/adutux.c262
-rw-r--r--drivers/usb/misc/usbled.c4
-rw-r--r--drivers/usb/serial/generic.c5
-rw-r--r--drivers/usb/serial/mos7840.c2
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h3
-rw-r--r--drivers/usb/serial/sierra.c2
-rw-r--r--drivers/usb/storage/scsiglue.c4
-rw-r--r--drivers/usb/storage/unusual_devs.h17
-rw-r--r--include/linux/usb.h1
-rw-r--r--include/linux/usbdevice_fs.h3
25 files changed, 272 insertions, 261 deletions
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 97842deec471..b2fc4d4a9917 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -278,6 +278,14 @@ optional. The methods' jobs are quite simple:
(although the interfaces will be in the same altsettings as
before the suspend).
+If the device is disconnected or powered down while it is suspended,
+the disconnect method will be called instead of the resume or
+reset_resume method. This is also quite likely to happen when
+waking up from hibernation, as many systems do not maintain suspend
+current to the USB host controllers during hibernation. (It's
+possible to work around the hibernation-forces-disconnect problem by
+using the USB Persist facility.)
+
The reset_resume method is used by the USB Persist facility (see
Documentation/usb/persist.txt) and it can also be used under certain
circumstances when CONFIG_USB_PERSIST is not enabled. Currently, if a
diff --git a/MAINTAINERS b/MAINTAINERS
index f5bd9bab7ed6..6b30cb3eac78 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -323,8 +323,7 @@ S: Maintained
ALCATEL SPEEDTOUCH USB DRIVER
P: Duncan Sands
M: duncan.sands@free.fr
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
@@ -1043,7 +1042,7 @@ S: Maintained
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
P: Lennert Buytenhek
M: kernel@wantstofly.org
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
@@ -1552,7 +1551,7 @@ S: Maintained
FREESCALE HIGHSPEED USB DEVICE DRIVER
P: Li Yang
M: leoli@freescale.com
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
@@ -3810,22 +3809,20 @@ S: Maintained
USB ACM DRIVER
P: Oliver Neukum
M: oliver@neukum.name
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB BLOCK DRIVER (UB ub)
P: Pete Zaitcev
M: zaitcev@redhat.com
L: linux-kernel@vger.kernel.org
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Supported
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
@@ -3839,13 +3836,13 @@ S: Maintained
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
@@ -3853,41 +3850,33 @@ S: Maintained
USB GADGET/PERIPHERAL SUBSYSTEM
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
P: Jiri Kosina
M: jkosina@suse.cz
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
-USB HUB DRIVER
-P: Johannes Erdfelt
-M: johannes@erdfelt.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
-
USB ISP116X DRIVER
P: Olav Kongas
M: ok@artecdesign.ee
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB KAWASAKI LSI DRIVER
P: Oliver Neukum
M: oliver@neukum.name
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB MASS STORAGE DRIVER
P: Matthew Dharm
M: mdharm-usb@one-eyed-alien.net
-L: linux-usb-users@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
@@ -3895,28 +3884,26 @@ W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
M: smurf@smurf.noris.de
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB OV511 DRIVER
P: Mark McClelland
M: mmcclell@bigfoot.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
USB PEGASUS DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
@@ -3924,14 +3911,13 @@ S: Maintained
USB PRINTER DRIVER (usblp)
P: Pete Zaitcev
M: zaitcev@redhat.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Supported
USB RTL8150 DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
@@ -3939,8 +3925,7 @@ S: Maintained
USB SE401 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
@@ -3954,72 +3939,59 @@ USB SERIAL DIGI ACCELEPORT DRIVER
P: Peter Berger and Al Borchers
M: pberger@brimson.com
M: alborchers@steinerpoint.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL DRIVER
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Supported
USB SERIAL BELKIN F5U103 DRIVER
P: William Greathouse
M: wgreathouse@smva.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL CYPRESS M8 DRIVER
P: Lonnie Mendez
M: dignome@gmail.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
-USB SERIAL CYBERJACK PINPAD/E-COM DRIVER
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
-
USB AUERSWALD DRIVER
P: Wolfgang Muees
M: wolfgang@iksw-muees.de
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
P: Gary Brubaker
M: xavyer@ix.netcom.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL KEYSPAN DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
USB SERIAL WHITEHEAT DRIVER
P: Support Department
M: support@connecttech.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
USB SN9C1xx DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
@@ -4027,8 +3999,7 @@ S: Maintained
USB SUBSYSTEM
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
@@ -4036,8 +4007,7 @@ S: Supported
USB UHCI DRIVER
P: Alan Stern
M: stern@rowland.harvard.edu
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB "USBNET" DRIVER FRAMEWORK
@@ -4050,7 +4020,7 @@ S: Maintained
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
@@ -4058,7 +4028,7 @@ S: Maintained
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
@@ -4066,15 +4036,14 @@ S: Maintained
USB ZD1201 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
USB ZR364XX DRIVER
P: Antoine Jacquet
M: royale@zerezo.com
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://royale.zerezo.com/zr364xx/
S: Maintained
diff --git a/drivers/usb/README b/drivers/usb/README
index 3c8434128554..284f46b3e1cc 100644
--- a/drivers/usb/README
+++ b/drivers/usb/README
@@ -39,12 +39,12 @@ first subdirectory in the list below that it fits into.
image/ - This is for still image drivers, like scanners or
digital cameras.
-input/ - This is for any driver that uses the input subsystem,
+../input/ - This is for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
-media/ - This is for multimedia drivers, like video cameras,
+../media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
-net/ - This is for network drivers.
+../net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 8586817698ad..c51f8e9312e0 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -585,9 +585,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
- if (!dev)
- return -ENODEV;
-
/* driver is often null here; dev_dbg() would oops */
pr_debug ("usb %s: uevent\n", dev->bus_id);
@@ -631,14 +628,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (add_uevent_var(env, "BUSNUM=%03d",
- usb_dev->bus->busnum))
- return -ENOMEM;
-
- if (add_uevent_var(env, "DEVNUM=%03d",
- usb_dev->devnum))
- return -ENOMEM;
-
return 0;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fea8256a18d6..d5ed3fa9e304 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1311,8 +1311,8 @@ void usb_hcd_flush_endpoint(struct usb_device *udev,
hcd = bus_to_hcd(udev->bus);
/* No more submits can occur */
-rescan:
spin_lock_irq(&hcd_urb_list_lock);
+rescan:
list_for_each_entry (urb, &ep->urb_list, urb_list) {
int is_in;
@@ -1345,6 +1345,7 @@ rescan:
usb_put_urb (urb);
/* list contents may have changed */
+ spin_lock(&hcd_urb_list_lock);
goto rescan;
}
spin_unlock_irq(&hcd_urb_list_lock);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 036c3dea855e..13b326a13377 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -335,7 +335,7 @@ static void kick_khubd(struct usb_hub *hub)
to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
spin_lock_irqsave(&hub_event_lock, flags);
- if (!hub->disconnected & list_empty(&hub->event_list)) {
+ if (!hub->disconnected && list_empty(&hub->event_list)) {
list_add_tail(&hub->event_list, &hub_event_list);
wake_up(&khubd_wait);
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 316a746e0080..fcd40ecbeecc 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1172,7 +1172,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
struct usb_host_interface *alt;
int ret;
int manual = 0;
- int changed;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
@@ -1212,8 +1211,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
*/
/* prevent submissions using previous endpoint settings */
- changed = (iface->cur_altsetting != alt);
- if (changed && device_is_registered(&iface->dev))
+ if (iface->cur_altsetting != alt && device_is_registered(&iface->dev))
usb_remove_sysfs_intf_files(iface);
usb_disable_interface(dev, iface);
@@ -1250,7 +1248,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
* (Likewise, EP0 never "halts" on well designed devices.)
*/
usb_enable_interface(dev, iface);
- if (changed && device_is_registered(&iface->dev))
+ if (device_is_registered(&iface->dev))
usb_create_sysfs_intf_files(iface);
return 0;
@@ -1348,34 +1346,10 @@ static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
struct usb_interface *intf;
struct usb_host_interface *alt;
- if (!dev)
- return -ENODEV;
-
- /* driver is often null here; dev_dbg() would oops */
- pr_debug ("usb %s: uevent\n", dev->bus_id);
-
intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev(intf);
alt = intf->cur_altsetting;
-#ifdef CONFIG_USB_DEVICEFS
- if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
- usb_dev->bus->busnum, usb_dev->devnum))
- return -ENOMEM;
-#endif
-
- if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice)))
- return -ENOMEM;
-
- if (add_uevent_var(env, "TYPE=%d/%d/%d",
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
-
if (add_uevent_var(env, "INTERFACE=%d/%d/%d",
alt->desc.bInterfaceClass,
alt->desc.bInterfaceSubClass,
@@ -1641,12 +1615,6 @@ free_interfaces:
intf->dev.bus_id, ret);
continue;
}
-
- /* The driver's probe method can call usb_set_interface(),
- * which would mean the interface's sysfs files are already
- * created. Just in case, we'll remove them first.
- */
- usb_remove_sysfs_intf_files(intf);
usb_create_sysfs_intf_files(intf);
}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index b04afd06e502..32bd130b1eed 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -735,6 +735,8 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf)
struct usb_host_interface *alt = intf->cur_altsetting;
int retval;
+ if (intf->sysfs_files_created)
+ return 0;
retval = sysfs_create_group(&dev->kobj, &intf_attr_grp);
if (retval)
return retval;
@@ -746,6 +748,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf)
if (intf->intf_assoc)
retval = sysfs_create_group(&dev->kobj, &intf_assoc_attr_grp);
usb_create_intf_ep_files(intf, udev);
+ intf->sysfs_files_created = 1;
return 0;
}
@@ -753,8 +756,11 @@ void usb_remove_sysfs_intf_files(struct usb_interface *intf)
{
struct device *dev = &intf->dev;
+ if (!intf->sysfs_files_created)
+ return;
usb_remove_intf_ep_files(intf);
device_remove_file(dev, &dev_attr_interface);
sysfs_remove_group(&dev->kobj, &intf_attr_grp);
sysfs_remove_group(&intf->dev.kobj, &intf_assoc_attr_grp);
+ intf->sysfs_files_created = 0;
}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index c4a6f1095b8b..8f142370103d 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -192,9 +192,34 @@ static void usb_release_dev(struct device *dev)
kfree(udev);
}
+#ifdef CONFIG_HOTPLUG
+static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct usb_device *usb_dev;
+
+ usb_dev = to_usb_device(dev);
+
+ if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum))
+ return -ENOMEM;
+
+ return 0;
+}
+
+#else
+
+static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_HOTPLUG */
+
struct device_type usb_device_type = {
.name = "usb_device",
.release = usb_release_dev,
+ .uevent = usb_dev_uevent,
};
#ifdef CONFIG_PM
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 87c4f50dfb61..d377154658b5 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1241,14 +1241,14 @@ static void pullup_enable(struct omap_udc *udc)
udc->gadget.dev.parent->power.power_state = PMSG_ON;
udc->gadget.dev.power.power_state = PMSG_ON;
UDC_SYSCON1_REG |= UDC_PULLUP_EN;
- if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
+ if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
OTG_CTRL_REG |= OTG_BSESSVLD;
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
}
static void pullup_disable(struct omap_udc *udc)
{
- if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
+ if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
OTG_CTRL_REG &= ~OTG_BSESSVLD;
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
@@ -1386,7 +1386,7 @@ static void update_otg(struct omap_udc *udc)
{
u16 devstat;
- if (!gadget_is_otg(udc->gadget))
+ if (!gadget_is_otg(&udc->gadget))
return;
if (OTG_CTRL_REG & OTG_ID)
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index e3e90f8a75e7..4ce050c3d13f 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -52,10 +52,10 @@
#include <asm/arch/irqs.h>
#include <asm/arch/hardware.h>
-#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-udc.h>
-#include <asm/arch/udc.h>
+
+#include <asm/plat-s3c24xx/regs-udc.h>
+#include <asm/plat-s3c24xx/udc.h>
#include <asm/mach-types.h>
@@ -1511,7 +1511,11 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev)
unsigned int value;
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+ /* some cpus cannot read from an line configured to IRQ! */
+ s3c2410_gpio_cfgpin(udc_info->vbus_pin, S3C2410_GPIO_INPUT);
value = s3c2410_gpio_getpin(udc_info->vbus_pin);
+ s3c2410_gpio_cfgpin(udc_info->vbus_pin, S3C2410_GPIO_SFN2);
if (udc_info->vbus_pin_inverted)
value = !value;
@@ -1872,9 +1876,9 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
if (udc_info && udc_info->vbus_pin > 0) {
irq = s3c2410_gpio_getirq(udc_info->vbus_pin);
retval = request_irq(irq, s3c2410_udc_vbus_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING
- | IRQF_TRIGGER_FALLING,
- gadget_name, udc);
+ IRQF_DISABLED | IRQF_TRIGGER_RISING
+ | IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ gadget_name, udc);
if (retval != 0) {
dev_err(dev, "can't get vbus irq %i, err %d\n",
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 177e78ed241b..49a91c5ee51b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -156,7 +156,7 @@ config USB_OHCI_HCD_PCI
config USB_OHCI_HCD_SSB
bool "OHCI support for Broadcom SSB OHCI core"
- depends on USB_OHCI_HCD && (SSB = y || SSB = CONFIG_USB_OHCI_HCD) && EXPERIMENTAL
+ depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
default n
---help---
Support for the Sonics Silicon Backplane (SSB) attached
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c1514442883e..5f2d74ed5ad7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -575,12 +575,15 @@ static int ehci_run (struct usb_hcd *hcd)
* from the companions to the EHCI controller. If any of the
* companions are in the middle of a port reset at the time, it
* could cause trouble. Write-locking ehci_cf_port_reset_rwsem
- * guarantees that no resets are in progress.
+ * guarantees that no resets are in progress. After we set CF,
+ * a short delay lets the hardware catch up; new resets shouldn't
+ * be started before the port switching actions could complete.
*/
down_write(&ehci_cf_port_reset_rwsem);
hcd->state = HC_STATE_RUNNING;
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+ msleep(5);
up_write(&ehci_cf_port_reset_rwsem);
temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 91e999c9f680..bc207e3c21f5 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -819,7 +819,7 @@ static int mts_usb_probe(struct usb_interface *intf,
goto out_kfree2;
new_desc->host->hostdata[0] = (unsigned long)new_desc;
- if (scsi_add_host(new_desc->host, NULL)) {
+ if (scsi_add_host(new_desc->host, &dev->dev)) {
err_retval = -EIO;
goto out_host_put;
}
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index c567aa7a41ea..5a2c44e4c1f7 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -79,12 +79,22 @@ MODULE_DEVICE_TABLE(usb, device_table);
#define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a command */
+/*
+ * The locking scheme is a vanilla 3-lock:
+ * adu_device.buflock: A spinlock, covers what IRQs touch.
+ * adutux_mutex: A Static lock to cover open_count. It would also cover
+ * any globals, but we don't have them in 2.6.
+ * adu_device.mtx: A mutex to hold across sleepers like copy_from_user.
+ * It covers all of adu_device, except the open_count
+ * and what .buflock covers.
+ */
+
/* Structure to hold all of our device specific stuff */
struct adu_device {
- struct mutex mtx; /* locks this structure */
+ struct mutex mtx;
struct usb_device* udev; /* save off the usb device pointer */
struct usb_interface* interface;
- unsigned char minor; /* the starting minor number for this device */
+ unsigned int minor; /* the starting minor number for this device */
char serial_number[8];
int open_count; /* number of times this port has been opened */
@@ -107,8 +117,11 @@ struct adu_device {
char* interrupt_out_buffer;
struct usb_endpoint_descriptor* interrupt_out_endpoint;
struct urb* interrupt_out_urb;
+ int out_urb_finished;
};
+static DEFINE_MUTEX(adutux_mutex);
+
static struct usb_driver adu_driver;
static void adu_debug_data(int level, const char *function, int size,
@@ -132,27 +145,31 @@ static void adu_debug_data(int level, const char *function, int size,
*/
static void adu_abort_transfers(struct adu_device *dev)
{
- dbg(2," %s : enter", __FUNCTION__);
+ unsigned long flags;
- if (dev == NULL) {
- dbg(1," %s : dev is null", __FUNCTION__);
- goto exit;
- }
+ dbg(2," %s : enter", __FUNCTION__);
if (dev->udev == NULL) {
dbg(1," %s : udev is null", __FUNCTION__);
goto exit;
}
- dbg(2," %s : udev state %d", __FUNCTION__, dev->udev->state);
- if (dev->udev->state == USB_STATE_NOTATTACHED) {
- dbg(1," %s : udev is not attached", __FUNCTION__);
- goto exit;
- }
-
/* shutdown transfer */
- usb_unlink_urb(dev->interrupt_in_urb);
- usb_unlink_urb(dev->interrupt_out_urb);
+
+ /* XXX Anchor these instead */
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->read_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ usb_kill_urb(dev->interrupt_in_urb);
+ } else
+ spin_unlock_irqrestore(&dev->buflock, flags);
+
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->out_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ usb_kill_urb(dev->interrupt_out_urb);
+ } else
+ spin_unlock_irqrestore(&dev->buflock, flags);
exit:
dbg(2," %s : leave", __FUNCTION__);
@@ -162,8 +179,6 @@ static void adu_delete(struct adu_device *dev)
{
dbg(2, "%s enter", __FUNCTION__);
- adu_abort_transfers(dev);
-
/* free data structures */
usb_free_urb(dev->interrupt_in_urb);
usb_free_urb(dev->interrupt_out_urb);
@@ -239,7 +254,10 @@ static void adu_interrupt_out_callback(struct urb *urb)
goto exit;
}
- wake_up_interruptible(&dev->write_wait);
+ spin_lock(&dev->buflock);
+ dev->out_urb_finished = 1;
+ wake_up(&dev->write_wait);
+ spin_unlock(&dev->buflock);
exit:
adu_debug_data(5, __FUNCTION__, urb->actual_length,
@@ -252,12 +270,17 @@ static int adu_open(struct inode *inode, struct file *file)
struct adu_device *dev = NULL;
struct usb_interface *interface;
int subminor;
- int retval = 0;
+ int retval;
dbg(2,"%s : enter", __FUNCTION__);
subminor = iminor(inode);
+ if ((retval = mutex_lock_interruptible(&adutux_mutex))) {
+ dbg(2, "%s : mutex lock failed", __FUNCTION__);
+ goto exit_no_lock;
+ }
+
interface = usb_find_interface(&adu_driver, subminor);
if (!interface) {
err("%s - error, can't find device for minor %d",
@@ -267,54 +290,54 @@ static int adu_open(struct inode *inode, struct file *file)
}
dev = usb_get_intfdata(interface);
- if (!dev) {
+ if (!dev || !dev->udev) {
retval = -ENODEV;
goto exit_no_device;
}
- /* lock this device */
- if ((retval = mutex_lock_interruptible(&dev->mtx))) {
- dbg(2, "%s : mutex lock failed", __FUNCTION__);
+ /* check that nobody else is using the device */
+ if (dev->open_count) {
+ retval = -EBUSY;
goto exit_no_device;
}
- /* increment our usage count for the device */
++dev->open_count;
dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count);
/* save device in the file's private structure */
file->private_data = dev;
- if (dev->open_count == 1) {
- /* initialize in direction */
- dev->read_buffer_length = 0;
+ /* initialize in direction */
+ dev->read_buffer_length = 0;
- /* fixup first read by having urb waiting for it */
- usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
- usb_rcvintpipe(dev->udev,
- dev->interrupt_in_endpoint->bEndpointAddress),
- dev->interrupt_in_buffer,
- le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
- adu_interrupt_in_callback, dev,
- dev->interrupt_in_endpoint->bInterval);
- /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
- dev->read_urb_finished = 0;
- retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
- if (retval)
- --dev->open_count;
- }
- mutex_unlock(&dev->mtx);
+ /* fixup first read by having urb waiting for it */
+ usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->interrupt_in_endpoint->bEndpointAddress),
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback, dev,
+ dev->interrupt_in_endpoint->bInterval);
+ dev->read_urb_finished = 0;
+ if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL))
+ dev->read_urb_finished = 1;
+ /* we ignore failure */
+ /* end of fixup for first read */
+
+ /* initialize out direction */
+ dev->out_urb_finished = 1;
+
+ retval = 0;
exit_no_device:
+ mutex_unlock(&adutux_mutex);
+exit_no_lock:
dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval);
-
return retval;
}
-static int adu_release_internal(struct adu_device *dev)
+static void adu_release_internal(struct adu_device *dev)
{
- int retval = 0;
-
dbg(2," %s : enter", __FUNCTION__);
/* decrement our usage count for the device */
@@ -326,12 +349,11 @@ static int adu_release_internal(struct adu_device *dev)
}
dbg(2," %s : leave", __FUNCTION__);
- return retval;
}
static int adu_release(struct inode *inode, struct file *file)
{
- struct adu_device *dev = NULL;
+ struct adu_device *dev;
int retval = 0;
dbg(2," %s : enter", __FUNCTION__);
@@ -343,15 +365,13 @@ static int adu_release(struct inode *inode, struct file *file)
}
dev = file->private_data;
-
if (dev == NULL) {
dbg(1," %s : object is NULL", __FUNCTION__);
retval = -ENODEV;
goto exit;
}
- /* lock our device */
- mutex_lock(&dev->mtx); /* not interruptible */
+ mutex_lock(&adutux_mutex); /* not interruptible */
if (dev->open_count <= 0) {
dbg(1," %s : device not opened", __FUNCTION__);
@@ -359,19 +379,15 @@ static int adu_release(struct inode *inode, struct file *file)
goto exit;
}
+ adu_release_internal(dev);
if (dev->udev == NULL) {
/* the device was unplugged before the file was released */
- mutex_unlock(&dev->mtx);
- adu_delete(dev);
- dev = NULL;
- } else {
- /* do the work */
- retval = adu_release_internal(dev);
+ if (!dev->open_count) /* ... and we're the last user */
+ adu_delete(dev);
}
exit:
- if (dev)
- mutex_unlock(&dev->mtx);
+ mutex_unlock(&adutux_mutex);
dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
return retval;
}
@@ -393,12 +409,12 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
dev = file->private_data;
dbg(2," %s : dev=%p", __FUNCTION__, dev);
- /* lock this object */
+
if (mutex_lock_interruptible(&dev->mtx))
return -ERESTARTSYS;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL || dev->minor == 0) {
+ if (dev->udev == NULL) {
retval = -ENODEV;
err("No device or device unplugged %d", retval);
goto exit;
@@ -452,7 +468,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
should_submit = 1;
} else {
/* even the primary was empty - we may need to do IO */
- if (dev->interrupt_in_urb->status == -EINPROGRESS) {
+ if (!dev->read_urb_finished) {
/* somebody is doing IO */
spin_unlock_irqrestore(&dev->buflock, flags);
dbg(2," %s : submitted already", __FUNCTION__);
@@ -460,6 +476,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
/* we must initiate input */
dbg(2," %s : initiate input", __FUNCTION__);
dev->read_urb_finished = 0;
+ spin_unlock_irqrestore(&dev->buflock, flags);
usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
usb_rcvintpipe(dev->udev,
@@ -469,15 +486,12 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
adu_interrupt_in_callback,
dev,
dev->interrupt_in_endpoint->bInterval);
- retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
- if (!retval) {
- spin_unlock_irqrestore(&dev->buflock, flags);
- dbg(2," %s : submitted OK", __FUNCTION__);
- } else {
+ retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ if (retval) {
+ dev->read_urb_finished = 1;
if (retval == -ENOMEM) {
retval = bytes_read ? bytes_read : -ENOMEM;
}
- spin_unlock_irqrestore(&dev->buflock, flags);
dbg(2," %s : submit failed", __FUNCTION__);
goto exit;
}
@@ -486,10 +500,14 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
/* we wait for I/O to complete */
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&dev->read_wait, &wait);
- if (!dev->read_urb_finished)
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->read_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
timeout = schedule_timeout(COMMAND_TIMEOUT);
- else
+ } else {
+ spin_unlock_irqrestore(&dev->buflock, flags);
set_current_state(TASK_RUNNING);
+ }
remove_wait_queue(&dev->read_wait, &wait);
if (timeout <= 0) {
@@ -509,19 +527,23 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
retval = bytes_read;
/* if the primary buffer is empty then use it */
- if (should_submit && !dev->interrupt_in_urb->status==-EINPROGRESS) {
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (should_submit && dev->read_urb_finished) {
+ dev->read_urb_finished = 0;
+ spin_unlock_irqrestore(&dev->buflock, flags);
usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
usb_rcvintpipe(dev->udev,
dev->interrupt_in_endpoint->bEndpointAddress),
- dev->interrupt_in_buffer,
- le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
- adu_interrupt_in_callback,
- dev,
- dev->interrupt_in_endpoint->bInterval);
- /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
- dev->read_urb_finished = 0;
- usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0)
+ dev->read_urb_finished = 1;
/* we ignore failure */
+ } else {
+ spin_unlock_irqrestore(&dev->buflock, flags);
}
exit:
@@ -535,24 +557,24 @@ exit:
static ssize_t adu_write(struct file *file, const __user char *buffer,
size_t count, loff_t *ppos)
{
+ DECLARE_WAITQUEUE(waita, current);
struct adu_device *dev;
size_t bytes_written = 0;
size_t bytes_to_write;
size_t buffer_size;
+ unsigned long flags;
int retval;
- int timeout = 0;
dbg(2," %s : enter, count = %Zd", __FUNCTION__, count);
dev = file->private_data;
- /* lock this object */
retval = mutex_lock_interruptible(&dev->mtx);
if (retval)
goto exit_nolock;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL || dev->minor == 0) {
+ if (dev->udev == NULL) {
retval = -ENODEV;
err("No device or device unplugged %d", retval);
goto exit;
@@ -564,42 +586,37 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
goto exit;
}
-
while (count > 0) {
- if (dev->interrupt_out_urb->status == -EINPROGRESS) {
- timeout = COMMAND_TIMEOUT;
+ add_wait_queue(&dev->write_wait, &waita);
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->out_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
- while (timeout > 0) {
- if (signal_pending(current)) {
+ mutex_unlock(&dev->mtx);
+ if (signal_pending(current)) {
dbg(1," %s : interrupted", __FUNCTION__);
+ set_current_state(TASK_RUNNING);
retval = -EINTR;
- goto exit;
+ goto exit_onqueue;
}
- mutex_unlock(&dev->mtx);
- timeout = interruptible_sleep_on_timeout(&dev->write_wait, timeout);
+ if (schedule_timeout(COMMAND_TIMEOUT) == 0) {
+ dbg(1, "%s - command timed out.", __FUNCTION__);
+ retval = -ETIMEDOUT;
+ goto exit_onqueue;
+ }
+ remove_wait_queue(&dev->write_wait, &waita);
retval = mutex_lock_interruptible(&dev->mtx);
if (retval) {
retval = bytes_written ? bytes_written : retval;
goto exit_nolock;
}
- if (timeout > 0) {
- break;
- }
- dbg(1," %s : interrupted timeout: %d", __FUNCTION__, timeout);
- }
-
-
- dbg(1," %s : final timeout: %d", __FUNCTION__, timeout);
-
- if (timeout == 0) {
- dbg(1, "%s - command timed out.", __FUNCTION__);
- retval = -ETIMEDOUT;
- goto exit;
- }
-
- dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count);
+ dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count);
} else {
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dev->write_wait, &waita);
dbg(4," %s : sending, count = %Zd", __FUNCTION__, count);
/* write the data into interrupt_out_buffer from userspace */
@@ -622,11 +639,12 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
bytes_to_write,
adu_interrupt_out_callback,
dev,
- dev->interrupt_in_endpoint->bInterval);
- /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->interrupt_out_endpoint->bInterval);
dev->interrupt_out_urb->actual_length = bytes_to_write;
+ dev->out_urb_finished = 0;
retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
if (retval < 0) {
+ dev->out_urb_finished = 1;
err("Couldn't submit interrupt_out_urb %d", retval);
goto exit;
}
@@ -637,16 +655,17 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
bytes_written += bytes_to_write;
}
}
-
- retval = bytes_written;
+ mutex_unlock(&dev->mtx);
+ return bytes_written;
exit:
- /* unlock the device */
mutex_unlock(&dev->mtx);
exit_nolock:
-
dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ return retval;
+exit_onqueue:
+ remove_wait_queue(&dev->write_wait, &waita);
return retval;
}
@@ -831,25 +850,22 @@ static void adu_disconnect(struct usb_interface *interface)
dbg(2," %s : enter", __FUNCTION__);
dev = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
+ mutex_lock(&dev->mtx); /* not interruptible */
+ dev->udev = NULL; /* poison */
minor = dev->minor;
-
- /* give back our minor */
usb_deregister_dev(interface, &adu_class);
- dev->minor = 0;
+ mutex_unlock(&dev->mtx);
- mutex_lock(&dev->mtx); /* not interruptible */
+ mutex_lock(&adutux_mutex);
+ usb_set_intfdata(interface, NULL);
/* if the device is not opened, then we clean up right now */
dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
- if (!dev->open_count) {
- mutex_unlock(&dev->mtx);
+ if (!dev->open_count)
adu_delete(dev);
- } else {
- dev->udev = NULL;
- mutex_unlock(&dev->mtx);
- }
+
+ mutex_unlock(&adutux_mutex);
dev_info(&interface->dev, "ADU device adutux%d now disconnected\n",
(minor - ADU_MINOR_BASE));
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 49c5c5c4c431..06cb71942dc7 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -144,12 +144,14 @@ static void led_disconnect(struct usb_interface *interface)
struct usb_led *dev;
dev = usb_get_intfdata (interface);
- usb_set_intfdata (interface, NULL);
device_remove_file(&interface->dev, &dev_attr_blue);
device_remove_file(&interface->dev, &dev_attr_red);
device_remove_file(&interface->dev, &dev_attr_green);
+ /* first remove the files, then set the pointer to NULL */
+ usb_set_intfdata (interface, NULL);
+
usb_put_dev(dev->udev);
kfree(dev);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 9eb4a65ee4d9..d41531139c55 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -327,6 +327,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb)
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
+ unsigned long flags;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -339,11 +340,11 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
/* Throttle the device if requested by tty */
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
if (!(port->throttled = port->throttle_req))
/* Handle data and continue reading from device */
flush_and_resubmit_read_urb(port);
- spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index a5ced7e08cbf..c29c91271133 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2711,7 +2711,7 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
if (status < 0) {
dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
- return -1;
+ goto error;
} else
dbg("ZLP_REG5 Writing success status%d\n", status);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2cd3f1d4b687..cf8add91de05 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -86,6 +86,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
+ { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index ed603e3decd6..d31f5d299989 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -104,3 +104,6 @@
#define WS002IN_VENDOR_ID 0x11f6
#define WS002IN_PRODUCT_ID 0x2001
+/* Corega CG-USBRS232R Serial Adapter */
+#define COREGA_VENDOR_ID 0x07aa
+#define COREGA_PRODUCT_ID 0x002a
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 833f6e1e3721..605ebccdcd51 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -136,6 +136,8 @@ static struct usb_device_id id_table_3port [] = {
{ USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U*/
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 1ba19eaa1970..836a34ae6ec6 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -177,6 +177,10 @@ static int slave_configure(struct scsi_device *sdev)
* is an occasional series of retries that will all fail. */
sdev->retry_hwerror = 1;
+ /* USB disks should allow restart. Some drives spin down
+ * automatically, requiring a START-STOP UNIT command. */
+ sdev->allow_restart = 1;
+
} else {
/* Non-disk-type devices don't need to blacklist any pages
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 22ab2380367d..2c27721bd259 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -342,11 +342,11 @@ UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100,
US_FL_FIX_CAPACITY),
/* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
-UNUSUAL_DEV( 0x04b0, 0x040f, 0x0200, 0x0200,
- "NIKON",
- "NIKON DSC D200",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
+UNUSUAL_DEV( 0x04b0, 0x040f, 0x0100, 0x0200,
+ "NIKON",
+ "NIKON DSC D200",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
/* Reported by Emil Larsson <emil@swip.net> */
UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101,
@@ -731,6 +731,13 @@ UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
#endif
+/* Reported by RTE <raszilki@yandex.ru> */
+UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
+ "JetFlash",
+ "TS1GJF2A/120",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Fabrizio Fellini <fello@libero.it> */
UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Fujifilm",
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c5c8f169d3cf..416ee7617d9e 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -157,6 +157,7 @@ struct usb_interface {
* bound to */
enum usb_interface_condition condition; /* state of binding */
unsigned is_active:1; /* the interface is not suspended */
+ unsigned sysfs_files_created:1; /* the sysfs attributes exist */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
struct device dev; /* interface specific device info */
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 342dd5a7e8bb..8ca5a7fbc9ec 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -102,7 +102,8 @@ struct usbdevfs_urb {
int start_frame;
int number_of_packets;
int error_count;
- unsigned int signr; /* signal to be sent on error, -1 if none should be sent */
+ unsigned int signr; /* signal to be sent on completion,
+ or 0 if none should be sent. */
void *usercontext;
struct usbdevfs_iso_packet_desc iso_frame_desc[0];
};