Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd

Pull MTD updates from Richard Weinberger: "General changes: - Unconfuse get_unmapped_area and point/unpoint driver methods - New partition parser: sharpslpart - Kill GENERIC_IO - Various fixes NAND changes: - Add a flag to mark NANDs that require 3 address cycles to encode a page address - Set a default ECC/free layout when NAND_ECC_NONE is requested - Fix a bug in panic_nand_write() - Another batch of cleanups for the denali driver - Fix PM support in the atmel driver - Remove support for platform data in the omap driver - Fix subpage write in the omap driver - Fix irq handling in the mtk driver - Change link order of mtk_ecc and mtk_nand drivers to speed up boot time - Change log level of ECC error messages in the mxc driver - Patch the pxa3xx driver to support Armada 8k platforms - Add BAM DMA support to the qcom driver - Convert gpio-nand to the GPIO desc API - Fix ECC handling in the mt29f driver SPI-NOR changes: - Introduce system power management support - New mechanism to select the proper .quad_enable() hook by JEDEC ID, when needed, instead of only by manufacturer ID - Add support to new memory parts from Gigadevice, Winbond, Macronix and Everspin - Maintainance for Cadence, Intel, Mediatek and STM32 drivers" * tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits) mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid mtd: sharpslpart: Add sharpslpart partition parser mtd: Add sanity checks in mtd_write/read_oob() mtd: remove the get_unmapped_area method mtd: implement mtd_get_unmapped_area() using the point method mtd: chips/map_rom.c: implement point and unpoint methods mtd: chips/map_ram.c: implement point and unpoint methods mtd: mtdram: properly handle the phys argument in the point method mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD' mtd: slram: use memremap() instead of ioremap() kconfig: kill off GENERIC_IO option mtd: Fix C++ comment in include/linux/mtd/mtd.h mtd: constify mtd_partition mtd: plat-ram: Replace manual resource management by devm mtd: nand: Fix writing mtdoops to nand flash. mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID mtd: nand: mtk: fix infinite ECC decode IRQ issue mtd: spi-nor: Add support for mr25h128 mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o mtd: spi-nor: enable 4B opcodes for mx66l51235l ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2017-11-23 09:46:06 +0300
committer: Linus Torvalds <torvalds@linux-foundation.org> 2017-11-23 09:46:06 +0300
commit: 14b661ebb6cfa386afa5a5247eb09e24d420af3a (patch)
tree: 3917a344c6fc46b2365077e99a27d84b9e2f2675
parent: 3f3211e755f329c56acf55faa0dbf91befd7b5ca (diff)
parent: 1530578abdac4edce9244c7a1962ded3ffdb58ce (diff)
download: linux-14b661ebb6cfa386afa5a5247eb09e24d420af3a.tar.xz
67 files changed, 1648 insertions, 754 deletions
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
index f248056da24c..bb2075df9b38 100644
--- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
@@ -1,7 +1,9 @@
 * Cadence Quad SPI controller
 
 Required properties:
-- compatible : Should be "cdns,qspi-nor".
+- compatible : should be one of the following:
+	Generic default - "cdns,qspi-nor".
+	For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
 - reg : Contains two entries, each of which is a tuple consisting of a
 	physical address and length. The first entry is the address and
 	length of the controller register set. The second entry is the
@@ -14,6 +16,9 @@ Required properties:
 
 Optional properties:
 - cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
+- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch
+  the read data rather than the QSPI clock. Make sure that QSPI return
+  clock is populated on the board before using this property.
 
 Optional subnodes:
 Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index 504291d2e5c2..0ee8edb60efc 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -29,7 +29,7 @@ nand: nand@ff900000 {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "altr,socfpga-denali-nand";
-	reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
+	reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
 	reg-names = "nand_data", "denali_reg";
 	interrupts = <0 144 4>;
 };
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
index 4cab5d85cf6f..376fa2f50e6b 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
@@ -14,6 +14,7 @@ Required properties:
                  at25df641
                  at26df081a
                  en25s64
+                 mr25h128
                  mr25h256
                  mr25h10
                  mr25h40
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index 840f9405dcf0..56d3668e2c50 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -1,13 +1,16 @@
 * Serial NOR flash controller for MTK MT81xx (and similar)
 
 Required properties:
-- compatible: 	  The possible values are:
-		  "mediatek,mt2701-nor"
-		  "mediatek,mt7623-nor"
+- compatible: 	  For mt8173, compatible should be "mediatek,mt8173-nor",
+		  and it's the fallback compatible for other Soc.
+		  For every other SoC, should contain both the SoC-specific compatible
+		  string and "mediatek,mt8173-nor".
+		  The possible values are:
+		  "mediatek,mt2701-nor", "mediatek,mt8173-nor"
+		  "mediatek,mt2712-nor", "mediatek,mt8173-nor"
+		  "mediatek,mt7622-nor", "mediatek,mt8173-nor"
+		  "mediatek,mt7623-nor", "mediatek,mt8173-nor"
 		  "mediatek,mt8173-nor"
-		  For mt8173, compatible should be "mediatek,mt8173-nor".
-		  For every other SoC, should contain both the SoC-specific compatible string
-		  and "mediatek,mt8173-nor".
 - reg: 		  physical base address and length of the controller's register
 - clocks: 	  the phandle of the clocks needed by the nor controller
 - clock-names: 	  the names of the clocks
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index d9b655f11048..d4ee4da58463 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -5,9 +5,13 @@ Required properties:
  - compatible:		Should be set to one of the following:
 			marvell,pxa3xx-nand
 			marvell,armada370-nand
+			marvell,armada-8k-nand
  - reg: 		The register base for the controller
  - interrupts:		The interrupt to map
  - #address-cells:	Set to <1> if the node includes partitions
+ - marvell,system-controller: Set to retrieve the syscon node that handles
+			NAND controller related registers (only required
+			with marvell,armada-8k-nand compatible).
 
 Optional properties:
 
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index b592f79a1742..fa8e7dd4d898 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand-gpio.h>
-
+#include <linux/gpio/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 
@@ -176,6 +176,17 @@ static inline void cmx255_init_nor(void) {}
 #endif
 
 #if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+
+static struct gpiod_lookup_table cmx255_nand_gpiod_table = {
+	.dev_id         = "gpio-nand",
+	.table          = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH),
+	},
+};
+
 static struct resource cmx255_nand_resource[] = {
 	[0] = {
 		.start = PXA_CS1_PHYS,
@@ -198,11 +209,6 @@ static struct mtd_partition cmx255_nand_parts[] = {
 };
 
 static struct gpio_nand_platdata cmx255_nand_platdata = {
-	.gpio_nce = GPIO_NAND_CS,
-	.gpio_cle = GPIO_NAND_CLE,
-	.gpio_ale = GPIO_NAND_ALE,
-	.gpio_rdy = GPIO_NAND_RB,
-	.gpio_nwp = -1,
 	.parts = cmx255_nand_parts,
 	.num_parts = ARRAY_SIZE(cmx255_nand_parts),
 	.chip_delay = 25,
@@ -220,6 +226,7 @@ static struct platform_device cmx255_nand = {
 
 static void __init cmx255_init_nand(void)
 {
+	gpiod_add_lookup_table(&cmx255_nand_gpiod_table);
 	platform_device_register(&cmx255_nand);
 }
 #else
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index d9280482a2f8..c68add8df3ae 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -10,7 +10,6 @@ config UML
 	select HAVE_DEBUG_KMEMLEAK
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
-	select GENERIC_IO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_GCC_PLUGINS
 	select TTY # Needed for line.c
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 5a2d71729b9a..2a8ac6829d42 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,6 +1,5 @@
 menuconfig MTD
 	tristate "Memory Technology Device (MTD) support"
-	depends on GENERIC_IO
 	help
 	  Memory Technology Devices are flash, RAM and similar chips, often
 	  used for solid state file systems on embedded devices. This option
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index afb43d5e1782..1cd0fff0e940 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -20,8 +20,9 @@ static int mapram_write (struct mtd_info *, loff_t, size_t, size_t *, const u_ch
 static int mapram_erase (struct mtd_info *, struct erase_info *);
 static void mapram_nop (struct mtd_info *);
 static struct mtd_info *map_ram_probe(struct map_info *map);
-static unsigned long mapram_unmapped_area(struct mtd_info *, unsigned long,
-					  unsigned long, unsigned long);
+static int mapram_point (struct mtd_info *mtd, loff_t from, size_t len,
+			 size_t *retlen, void **virt, resource_size_t *phys);
+static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
 
 
 static struct mtd_chip_driver mapram_chipdrv = {
@@ -65,11 +66,12 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
 	mtd->type = MTD_RAM;
 	mtd->size = map->size;
 	mtd->_erase = mapram_erase;
-	mtd->_get_unmapped_area = mapram_unmapped_area;
 	mtd->_read = mapram_read;
 	mtd->_write = mapram_write;
 	mtd->_panic_write = mapram_write;
+	mtd->_point = mapram_point;
 	mtd->_sync = mapram_nop;
+	mtd->_unpoint = mapram_unpoint;
 	mtd->flags = MTD_CAP_RAM;
 	mtd->writesize = 1;
 
@@ -81,19 +83,23 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
 	return mtd;
 }
 
-
-/*
- * Allow NOMMU mmap() to directly map the device (if not NULL)
- * - return the address to which the offset maps
- * - return -ENOSYS to indicate refusal to do the mapping
- */
-static unsigned long mapram_unmapped_area(struct mtd_info *mtd,
-					  unsigned long len,
-					  unsigned long offset,
-					  unsigned long flags)
+static int mapram_point(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct map_info *map = mtd->priv;
-	return (unsigned long) map->virt + offset;
+
+	if (!map->virt)
+		return -EINVAL;
+	*virt = map->virt + from;
+	if (phys)
+		*phys = map->phys + from;
+	*retlen = len;
+	return 0;
+}
+
+static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	return 0;
 }
 
 static int mapram_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index e67f73ab44c9..20e3604b4d71 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -20,8 +20,10 @@ static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_ch
 static void maprom_nop (struct mtd_info *);
 static struct mtd_info *map_rom_probe(struct map_info *map);
 static int maprom_erase (struct mtd_info *mtd, struct erase_info *info);
-static unsigned long maprom_unmapped_area(struct mtd_info *, unsigned long,
-					  unsigned long, unsigned long);
+static int maprom_point (struct mtd_info *mtd, loff_t from, size_t len,
+			 size_t *retlen, void **virt, resource_size_t *phys);
+static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
+
 
 static struct mtd_chip_driver maprom_chipdrv = {
 	.probe	= map_rom_probe,
@@ -51,7 +53,8 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
 	mtd->name = map->name;
 	mtd->type = MTD_ROM;
 	mtd->size = map->size;
-	mtd->_get_unmapped_area = maprom_unmapped_area;
+	mtd->_point = maprom_point;
+	mtd->_unpoint = maprom_unpoint;
 	mtd->_read = maprom_read;
 	mtd->_write = maprom_write;
 	mtd->_sync = maprom_nop;
@@ -66,18 +69,23 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
 }
 
 
-/*
- * Allow NOMMU mmap() to directly map the device (if not NULL)
- * - return the address to which the offset maps
- * - return -ENOSYS to indicate refusal to do the mapping
- */
-static unsigned long maprom_unmapped_area(struct mtd_info *mtd,
-					  unsigned long len,
-					  unsigned long offset,
-					  unsigned long flags)
+static int maprom_point(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct map_info *map = mtd->priv;
-	return (unsigned long) map->virt + offset;
+
+	if (!map->virt)
+		return -EINVAL;
+	*virt = map->virt + from;
+	if (phys)
+		*phys = map->phys + from;
+	*retlen = len;
+	return 0;
+}
+
+static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	return 0;
 }
 
 static int maprom_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 84b16133554b..0806f72102c0 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1814,8 +1814,13 @@ static void __init doc_dbg_register(struct mtd_info *floor)
 	struct dentry *root = floor->dbg.dfs_dir;
 	struct docg3 *docg3 = floor->priv;
 
-	if (IS_ERR_OR_NULL(root))
+	if (IS_ERR_OR_NULL(root)) {
+		if (IS_ENABLED(CONFIG_DEBUG_FS) &&
+		    !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER))
+			dev_warn(floor->dev.parent,
+				 "CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n");
 		return;
+	}
 
 	debugfs_create_file("docg3_flashcontrol", S_IRUSR, root, docg3,
 			    &flashcontrol_fops);
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 268aae45b514..555b94406e0b 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -583,7 +583,7 @@ static struct mtd_erase_region_info erase_regions[] = {
 	}
 };
 
-static struct mtd_partition lart_partitions[] = {
+static const struct mtd_partition lart_partitions[] = {
 	/* blob */
 	{
 		.name	= "blob",
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 00eea6fd379c..dbe6a1de2bb8 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -359,6 +359,7 @@ static const struct spi_device_id m25p_ids[] = {
 	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
 
 	/* Everspin MRAMs (non-JEDEC) */
+	{ "mr25h128" }, /* 128 Kib, 40 MHz */
 	{ "mr25h256" }, /* 256 Kib, 40 MHz */
 	{ "mr25h10" },  /*   1 Mib, 40 MHz */
 	{ "mr25h40" },  /*   4 Mib, 40 MHz */
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index cbd8547d7aad..0bf4aeaf0cb8 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/mtdram.h>
@@ -69,6 +70,27 @@ static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	*virt = mtd->priv + from;
 	*retlen = len;
+
+	if (phys) {
+		/* limit retlen to the number of contiguous physical pages */
+		unsigned long page_ofs = offset_in_page(*virt);
+		void *addr = *virt - page_ofs;
+		unsigned long pfn1, pfn0 = vmalloc_to_pfn(addr);
+
+		*phys = __pfn_to_phys(pfn0) + page_ofs;
+		len += page_ofs;
+		while (len > PAGE_SIZE) {
+			len -= PAGE_SIZE;
+			addr += PAGE_SIZE;
+			pfn0++;
+			pfn1 = vmalloc_to_pfn(addr);
+			if (pfn1 != pfn0) {
+				*retlen = addr - *virt;
+				break;
+			}
+		}
+	}
+
 	return 0;
 }
 
@@ -77,19 +99,6 @@ static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 	return 0;
 }
 
-/*
- * Allow NOMMU mmap() to directly map the device (if not NULL)
- * - return the address to which the offset maps
- * - return -ENOSYS to indicate refusal to do the mapping
- */
-static unsigned long ram_get_unmapped_area(struct mtd_info *mtd,
-					   unsigned long len,
-					   unsigned long offset,
-					   unsigned long flags)
-{
-	return (unsigned long) mtd->priv + offset;
-}
-
 static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, u_char *buf)
 {
@@ -134,7 +143,6 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
 	mtd->_erase = ram_erase;
 	mtd->_point = ram_point;
 	mtd->_unpoint = ram_unpoint;
-	mtd->_get_unmapped_area = ram_get_unmapped_area;
 	mtd->_read = ram_read;
 	mtd->_write = ram_write;
 
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 8087c36dc693..0ec85f316d24 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -163,8 +163,9 @@ static int register_device(char *name, unsigned long start, unsigned long length
 	}
 
 	if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start =
-				ioremap(start, length))) {
-		E("slram: ioremap failed\n");
+		memremap(start, length,
+			 MEMREMAP_WB | MEMREMAP_WT | MEMREMAP_WC))) {
+		E("slram: memremap failed\n");
 		return -EIO;
 	}
 	((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end =
@@ -186,7 +187,7 @@ static int register_device(char *name, unsigned long start, unsigned long length
 
 	if (mtd_device_register((*curmtd)->mtdinfo, NULL, 0))	{
 		E("slram: Failed to register new device\n");
-		iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
+		memunmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
 		kfree((*curmtd)->mtdinfo->priv);
 		kfree((*curmtd)->mtdinfo);
 		return(-EAGAIN);
@@ -206,7 +207,7 @@ static void unregister_devices(void)
 	while (slram_mtdlist) {
 		nextitem = slram_mtdlist->next;
 		mtd_device_unregister(slram_mtdlist->mtdinfo);
-		iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
+		memunmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
 		kfree(slram_mtdlist->mtdinfo->priv);
 		kfree(slram_mtdlist->mtdinfo);
 		kfree(slram_mtdlist);
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index d504b3d1791d..70f488628464 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -61,7 +61,7 @@ static struct map_info flagadm_map = {
 		.bankwidth =	2,
 };
 
-static struct mtd_partition flagadm_parts[] = {
+static const struct mtd_partition flagadm_parts[] = {
 	{
 		.name =		"Bootloader",
 		.offset	=	FLASH_PARTITION0_ADDR,
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index 15bbda03be65..a0b8fa7849a9 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -47,7 +47,7 @@ static struct map_info impa7_map[NUM_FLASHBANKS] = {
 /*
  * MTD partitioning stuff
  */
-static struct mtd_partition partitions[] =
+static const struct mtd_partition partitions[] =
 {
 	{
 		.name = "FileSystem",
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 81dc2598bc0a..3528497f96c7 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -52,7 +52,7 @@
 /* partition_info gives details on the logical partitions that the split the
  * single flash device into. If the size if zero we use up to the end of the
  * device. */
-static struct mtd_partition partition_info[]={
+static const struct mtd_partition partition_info[] = {
     {
 	    .name = "NetSc520 boot kernel",
 	    .offset = 0,
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index a577ef8553d0..729579fb654f 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -107,7 +107,7 @@ static struct map_info nettel_amd_map = {
 	.bankwidth = AMD_BUSWIDTH,
 };
 
-static struct mtd_partition nettel_amd_partitions[] = {
+static const struct mtd_partition nettel_amd_partitions[] = {
 	{
 		.name = "SnapGear BIOS config",
 		.offset = 0x000e0000,
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 51572895c02c..6d9a4d6f9839 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -43,7 +43,6 @@ struct platram_info {
 	struct device		*dev;
 	struct mtd_info		*mtd;
 	struct map_info		 map;
-	struct resource		*area;
 	struct platdata_mtd_ram	*pdata;
 };
 
@@ -97,16 +96,6 @@ static int platram_remove(struct platform_device *pdev)
 
 	platram_setrw(info, PLATRAM_RO);
 
-	/* release resources */
-
-	if (info->area) {
-		release_resource(info->area);
-		kfree(info->area);
-	}
-
-	if (info->map.virt != NULL)
-		iounmap(info->map.virt);
-
 	kfree(info);
 
 	return 0;
@@ -147,12 +136,11 @@ static int platram_probe(struct platform_device *pdev)
 	info->pdata = pdata;
 
 	/* get the resource for the memory mapping */
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource specified\n");
-		err = -ENOENT;
+	info->map.virt = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->map.virt)) {
+		err = PTR_ERR(info->map.virt);
+		dev_err(&pdev->dev, "failed to ioremap() region\n");
 		goto exit_free;
 	}
 
@@ -167,26 +155,8 @@ static int platram_probe(struct platform_device *pdev)
 			(char *)pdata->mapname : (char *)pdev->name;
 	info->map.bankwidth = pdata->bankwidth;
 
-	/* register our usage of the memory area */
-
-	info->area = request_mem_region(res->start, info->map.size, pdev->name);
-	if (info->area == NULL) {
-		dev_err(&pdev->dev, "failed to request memory region\n");
-		err = -EIO;
-		goto exit_free;
-	}
-
-	/* remap the memory area */
-
-	info->map.virt = ioremap(res->start, info->map.size);
 	dev_dbg(&pdev->dev, "virt %p, %lu bytes\n", info->map.virt, info->map.size);
 
-	if (info->map.virt == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() region\n");
-		err = -EIO;
-		goto exit_free;
-	}
-
 	simple_map_init(&info->map);
 
 	dev_dbg(&pdev->dev, "initialised map, probing for mtd\n");
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 556a2dfe94c5..4337d279ad83 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -87,7 +87,7 @@ static DEFINE_SPINLOCK(sbc_gxx_spin);
 /* partition_info gives details on the logical partitions that the split the
  * single flash device into. If the size if zero we use up to the end of the
  * device. */
-static struct mtd_partition partition_info[]={
+static const struct mtd_partition partition_info[] = {
     { .name = "SBC-GXx flash boot partition",
       .offset = 0,
       .size =   BOOT_PARTITION_SIZE_KiB*1024 },
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index 9969fedb1f13..8f177e0acb8c 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -43,7 +43,7 @@ static struct map_info ts5500_map = {
 	.phys = WINDOW_ADDR
 };
 
-static struct mtd_partition ts5500_partitions[] = {
+static const struct mtd_partition ts5500_partitions[] = {
 	{
 		.name = "Drive A",
 		.offset = 0,
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 00a8190797ec..aef030ca8601 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -49,7 +49,7 @@ static struct mtd_info *uclinux_ram_mtdinfo;
 
 /****************************************************************************/
 
-static struct mtd_partition uclinux_romfs[] = {
+static const struct mtd_partition uclinux_romfs[] = {
 	{ .name = "ROMfs" }
 };
 
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index d573606b91c2..60bf53df5454 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -644,32 +644,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
 }
 
 /*
- * try to support NOMMU mmaps on concatenated devices
- * - we don't support subdev spanning as we can't guarantee it'll work
- */
-static unsigned long concat_get_unmapped_area(struct mtd_info *mtd,
-					      unsigned long len,
-					      unsigned long offset,
-					      unsigned long flags)
-{
-	struct mtd_concat *concat = CONCAT(mtd);
-	int i;
-
-	for (i = 0; i < concat->num_subdev; i++) {
-		struct mtd_info *subdev = concat->subdev[i];
-
-		if (offset >= subdev->size) {
-			offset -= subdev->size;
-			continue;
-		}
-
-		return mtd_get_unmapped_area(subdev, len, offset, flags);
-	}
-
-	return (unsigned long) -ENOSYS;
-}
-
-/*
  * This function constructs a virtual MTD device by concatenating
  * num_devs MTD devices. A pointer to the new device object is
  * stored to *new_dev upon success. This function does _not_
@@ -790,7 +764,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->mtd._unlock = concat_unlock;
 	concat->mtd._suspend = concat_suspend;
 	concat->mtd._resume = concat_resume;
-	concat->mtd._get_unmapped_area = concat_get_unmapped_area;
 
 	/*
 	 * Combine the erase block size info of the subdevices:
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index e7ea842ba3db..f80e911b8843 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1022,11 +1022,18 @@ EXPORT_SYMBOL_GPL(mtd_unpoint);
 unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
 				    unsigned long offset, unsigned long flags)
 {
-	if (!mtd->_get_unmapped_area)
-		return -EOPNOTSUPP;
-	if (offset >= mtd->size || len > mtd->size - offset)
-		return -EINVAL;
-	return mtd->_get_unmapped_area(mtd, len, offset, flags);
+	size_t retlen;
+	void *virt;
+	int ret;
+
+	ret = mtd_point(mtd, offset, len, &retlen, &virt, NULL);
+	if (ret)
+		return ret;
+	if (retlen != len) {
+		mtd_unpoint(mtd, offset, retlen);
+		return -ENOSYS;
+	}
+	return (unsigned long)virt;
 }
 EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
 
@@ -1093,6 +1100,39 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 }
 EXPORT_SYMBOL_GPL(mtd_panic_write);
 
+static int mtd_check_oob_ops(struct mtd_info *mtd, loff_t offs,
+			     struct mtd_oob_ops *ops)
+{
+	/*
+	 * Some users are setting ->datbuf or ->oobbuf to NULL, but are leaving
+	 * ->len or ->ooblen uninitialized. Force ->len and ->ooblen to 0 in
+	 *  this case.
+	 */
+	if (!ops->datbuf)
+		ops->len = 0;
+
+	if (!ops->oobbuf)
+		ops->ooblen = 0;
+
+	if (offs < 0 || offs + ops->len >= mtd->size)
+		return -EINVAL;
+
+	if (ops->ooblen) {
+		u64 maxooblen;
+
+		if (ops->ooboffs >= mtd_oobavail(mtd, ops))
+			return -EINVAL;
+
+		maxooblen = ((mtd_div_by_ws(mtd->size, mtd) -
+			      mtd_div_by_ws(offs, mtd)) *
+			     mtd_oobavail(mtd, ops)) - ops->ooboffs;
+		if (ops->ooblen > maxooblen)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 {
 	int ret_code;
@@ -1100,6 +1140,10 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 	if (!mtd->_read_oob)
 		return -EOPNOTSUPP;
 
+	ret_code = mtd_check_oob_ops(mtd, from, ops);
+	if (ret_code)
+		return ret_code;
+
 	ledtrig_mtd_activity();
 	/*
 	 * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics
@@ -1119,11 +1163,18 @@ EXPORT_SYMBOL_GPL(mtd_read_oob);
 int mtd_write_oob(struct mtd_info *mtd, loff_t to,
 				struct mtd_oob_ops *ops)
 {
+	int ret;
+
 	ops->retlen = ops->oobretlen = 0;
 	if (!mtd->_write_oob)
 		return -EOPNOTSUPP;
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
+
+	ret = mtd_check_oob_ops(mtd, to, ops);
+	if (ret)
+		return ret;
+
 	ledtrig_mtd_activity();
 	return mtd->_write_oob(mtd, to, ops);
 }
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index a308e707392d..be088bccd593 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -101,18 +101,6 @@ static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 	return part->parent->_unpoint(part->parent, from + part->offset, len);
 }
 
-static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
-					    unsigned long len,
-					    unsigned long offset,
-					    unsigned long flags)
-{
-	struct mtd_part *part = mtd_to_part(mtd);
-
-	offset += part->offset;
-	return part->parent->_get_unmapped_area(part->parent, len, offset,
-						flags);
-}
-
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
 		struct mtd_oob_ops *ops)
 {
@@ -458,8 +446,6 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
 		slave->mtd._unpoint = part_unpoint;
 	}
 
-	if (parent->_get_unmapped_area)
-		slave->mtd._get_unmapped_area = part_get_unmapped_area;
 	if (parent->_read_oob)
 		slave->mtd._read_oob = part_read_oob;
 	if (parent->_write_oob)
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
index 7d9080e33865..f07492c6f4b2 100644
--- a/drivers/mtd/mtdswap.c
+++ b/drivers/mtd/mtdswap.c
@@ -50,7 +50,7 @@
  * Number of free eraseblocks below which GC can also collect low frag
  * blocks.
  */
-#define LOW_FRAG_GC_TRESHOLD	5
+#define LOW_FRAG_GC_THRESHOLD	5
 
 /*
  * Wear level cost amortization. We want to do wear leveling on the background
@@ -805,7 +805,7 @@ static int __mtdswap_choose_gc_tree(struct mtdswap_dev *d)
 {
 	int idx, stopat;
 
-	if (TREE_COUNT(d, CLEAN) < LOW_FRAG_GC_TRESHOLD)
+	if (TREE_COUNT(d, CLEAN) < LOW_FRAG_GC_THRESHOLD)
 		stopat = MTDSWAP_LOWFRAG;
 	else
 		stopat = MTDSWAP_HIFRAG;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3f2036f31da4..bb48aafed9a2 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -317,8 +317,11 @@ config MTD_NAND_PXA3xx
 	tristate "NAND support on PXA3xx and Armada 370/XP"
 	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU
 	help
+
 	  This enables the driver for the NAND flash device found on
-	  PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
+	  PXA3xx processors (NFCv1) and also on 32-bit Armada
+	  platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada
+	  platforms (7K, 8K) (NFCv2).
 
 config MTD_NAND_SLC_LPC32XX
 	tristate "NXP LPC32xx SLC Controller"
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 6e2db700d923..118a1349aad3 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
 obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
 obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
 obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
-obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_nand.o mtk_ecc.o
+obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
 
 nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
 nand-objs += nand_amd.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index dcec9cf4983f..d60ada45c549 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -41,7 +41,7 @@ static struct mtd_info *ams_delta_mtd = NULL;
  * Define partitions for flash devices
  */
 
-static struct mtd_partition partition_info[] = {
+static const struct mtd_partition partition_info[] = {
 	{ .name		= "Kernel",
 	  .offset	= 0,
 	  .size		= 3 * SZ_1M + SZ_512K },
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index f25eca79f4e5..90a71a56bc23 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -718,8 +718,7 @@ static void atmel_nfc_set_op_addr(struct nand_chip *chip, int page, int column)
 		nc->op.addrs[nc->op.naddrs++] = page;
 		nc->op.addrs[nc->op.naddrs++] = page >> 8;
 
-		if ((mtd->writesize > 512 && chip->chipsize > SZ_128M) ||
-		    (mtd->writesize <= 512 && chip->chipsize > SZ_32M))
+		if (chip->options & NAND_ROW_ADDR_3)
 			nc->op.addrs[nc->op.naddrs++] = page >> 16;
 	}
 }
@@ -2530,6 +2529,9 @@ static __maybe_unused int atmel_nand_controller_resume(struct device *dev)
 	struct atmel_nand_controller *nc = dev_get_drvdata(dev);
 	struct atmel_nand *nand;
 
+	if (nc->pmecc)
+		atmel_pmecc_reset(nc->pmecc);
+
 	list_for_each_entry(nand, &nc->chips, node) {
 		int i;
 
@@ -2547,6 +2549,7 @@ static struct platform_driver atmel_nand_controller_driver = {
 	.driver = {
 		.name = "atmel-nand-controller",
 		.of_match_table = of_match_ptr(atmel_nand_controller_of_ids),
+		.pm = &atmel_nand_controller_pm_ops,
 	},
 	.probe = atmel_nand_controller_probe,
 	.remove = atmel_nand_controller_remove,
diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c
index 8268636675ef..fcbe4fd6e684 100644
--- a/drivers/mtd/nand/atmel/pmecc.c
+++ b/drivers/mtd/nand/atmel/pmecc.c
@@ -765,6 +765,13 @@ void atmel_pmecc_get_generated_eccbytes(struct atmel_pmecc_user *user,
 }
 EXPORT_SYMBOL_GPL(atmel_pmecc_get_generated_eccbytes);
 
+void atmel_pmecc_reset(struct atmel_pmecc *pmecc)
+{
+	writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL);
+	writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL);
+}
+EXPORT_SYMBOL_GPL(atmel_pmecc_reset);
+
 int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op)
 {
 	struct atmel_pmecc *pmecc = user->pmecc;
@@ -797,10 +804,7 @@ EXPORT_SYMBOL_GPL(atmel_pmecc_enable);
 
 void atmel_pmecc_disable(struct atmel_pmecc_user *user)
 {
-	struct atmel_pmecc *pmecc = user->pmecc;
-
-	writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL);
-	writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL);
+	atmel_pmecc_reset(user->pmecc);
 	mutex_unlock(&user->pmecc->lock);
 }
 EXPORT_SYMBOL_GPL(atmel_pmecc_disable);
@@ -855,10 +859,7 @@ static struct atmel_pmecc *atmel_pmecc_create(struct platform_device *pdev,
 
 	/* Disable all interrupts before registering the PMECC handler. */
 	writel(0xffffffff, pmecc->regs.base + ATMEL_PMECC_IDR);
-
-	/* Reset the ECC engine */
-	writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL);
-	writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL);
+	atmel_pmecc_reset(pmecc);
 
 	return pmecc;
 }
diff --git a/drivers/mtd/nand/atmel/pmecc.h b/drivers/mtd/nand/atmel/pmecc.h
index a8ddbfca2ea5..817e0dd9fd15 100644
--- a/drivers/mtd/nand/atmel/pmecc.h
+++ b/drivers/mtd/nand/atmel/pmecc.h
@@ -61,6 +61,7 @@ atmel_pmecc_create_user(struct atmel_pmecc *pmecc,
 			struct atmel_pmecc_user_req *req);
 void atmel_pmecc_destroy_user(struct atmel_pmecc_user *user);
 
+void atmel_pmecc_reset(struct atmel_pmecc *pmecc);
 int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op);
 void atmel_pmecc_disable(struct atmel_pmecc_user *user);
 int atmel_pmecc_wait_rdy(struct atmel_pmecc_user *user);
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 9d4a28fa6b73..8ab827edf94e 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -331,8 +331,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 
 			ctx->write_byte(mtd, (u8)(page_addr >> 8));
 
-			/* One more address cycle for devices > 32MiB */
-			if (this->chipsize > (32 << 20))
+			if (this->options & NAND_ROW_ADDR_3)
 				ctx->write_byte(mtd,
 						((page_addr >> 16) & 0x0f));
 		}
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 1fc435f994e1..b01c9804590e 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -42,7 +42,7 @@ static void __iomem *cmx270_nand_io;
 /*
  * Define static partitions for flash device
  */
-static struct mtd_partition partition_info[] = {
+static const struct mtd_partition partition_info[] = {
 	[0] = {
 		.name	= "cmx270-0",
 		.offset	= 0,
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 3087b0ba7b7f..5124f8ae8c04 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -10,20 +10,18 @@
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  */
-#include <linux/interrupt.h>
-#include <linux/delay.h>
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
 #include <linux/dma-mapping.h>
-#include <linux/wait.h>
-#include <linux/mutex.h>
-#include <linux/mtd/mtd.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 
 #include "denali.h"
 
@@ -31,9 +29,9 @@ MODULE_LICENSE("GPL");
 
 #define DENALI_NAND_NAME    "denali-nand"
 
-/* Host Data/Command Interface */
-#define DENALI_HOST_ADDR	0x00
-#define DENALI_HOST_DATA	0x10
+/* for Indexed Addressing */
+#define DENALI_INDEXED_CTRL	0x00
+#define DENALI_INDEXED_DATA	0x10
 
 #define DENALI_MAP00		(0 << 26)	/* direct access to buffer */
 #define DENALI_MAP01		(1 << 26)	/* read/write pages in PIO */
@@ -61,31 +59,55 @@ MODULE_LICENSE("GPL");
  */
 #define DENALI_CLK_X_MULT	6
 
-/*
- * this macro allows us to convert from an MTD structure to our own
- * device context (denali) structure.
- */
 static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
 {
 	return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand);
 }
 
-static void denali_host_write(struct denali_nand_info *denali,
-			      uint32_t addr, uint32_t data)
+/*
+ * Direct Addressing - the slave address forms the control information (command
+ * type, bank, block, and page address).  The slave data is the actual data to
+ * be transferred.  This mode requires 28 bits of address region allocated.
+ */
+static u32 denali_direct_read(struct denali_nand_info *denali, u32 addr)
+{
+	return ioread32(denali->host + addr);
+}
+
+static void denali_direct_write(struct denali_nand_info *denali, u32 addr,
+				u32 data)
 {
-	iowrite32(addr, denali->host + DENALI_HOST_ADDR);
-	iowrite32(data, denali->host + DENALI_HOST_DATA);
+	iowrite32(data, denali->host + addr);
+}
+
+/*
+ * Indexed Addressing - address translation module intervenes in passing the
+ * control information.  This mode reduces the required address range.  The
+ * control information and transferred data are latched by the registers in
+ * the translation module.
+ */
+static u32 denali_indexed_read(struct denali_nand_info *denali, u32 addr)
+{
+	iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
+	return ioread32(denali->host + DENALI_INDEXED_DATA);
+}
+
+static void denali_indexed_write(struct denali_nand_info *denali, u32 addr,
+				 u32 data)
+{
+	iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
+	iowrite32(data, denali->host + DENALI_INDEXED_DATA);
 }
 
 /*
  * Use the configuration feature register to determine the maximum number of
  * banks that the hardware supports.
  */
-static void detect_max_banks(struct denali_nand_info *denali)
+static void denali_detect_max_banks(struct denali_nand_info *denali)
 {
 	uint32_t features = ioread32(denali->reg + FEATURES);
 
-	denali->max_banks = 1 << (features & FEATURES__N_BANKS);
+	denali->max_banks = 1 << FIELD_GET(FEATURES__N_BANKS, features);
 
 	/* the encoding changed from rev 5.0 to 5.1 */
 	if (denali->revision < 0x0501)
@@ -189,7 +211,7 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
 						msecs_to_jiffies(1000));
 	if (!time_left) {
 		dev_err(denali->dev, "timeout while waiting for irq 0x%x\n",
-			denali->irq_mask);
+			irq_mask);
 		return 0;
 	}
 
@@ -208,73 +230,47 @@ static uint32_t denali_check_irq(struct denali_nand_info *denali)
 	return irq_status;
 }
 
-/*
- * This helper function setups the registers for ECC and whether or not
- * the spare area will be transferred.
- */
-static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
-				bool transfer_spare)
-{
-	int ecc_en_flag, transfer_spare_flag;
-
-	/* set ECC, transfer spare bits if needed */
-	ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
-	transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
-
-	/* Enable spare area/ECC per user's request. */
-	iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE);
-	iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG);
-}
-
 static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
 	int i;
 
-	iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
-		  denali->host + DENALI_HOST_ADDR);
-
 	for (i = 0; i < len; i++)
-		buf[i] = ioread32(denali->host + DENALI_HOST_DATA);
+		buf[i] = denali->host_read(denali, addr);
 }
 
 static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
 	int i;
 
-	iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
-		  denali->host + DENALI_HOST_ADDR);
-
 	for (i = 0; i < len; i++)
-		iowrite32(buf[i], denali->host + DENALI_HOST_DATA);
+		denali->host_write(denali, addr, buf[i]);
 }
 
 static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
 	uint16_t *buf16 = (uint16_t *)buf;
 	int i;
 
-	iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
-		  denali->host + DENALI_HOST_ADDR);
-
 	for (i = 0; i < len / 2; i++)
-		buf16[i] = ioread32(denali->host + DENALI_HOST_DATA);
+		buf16[i] = denali->host_read(denali, addr);
 }
 
 static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf,
 			       int len)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
 	const uint16_t *buf16 = (const uint16_t *)buf;
 	int i;
 
-	iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
-		  denali->host + DENALI_HOST_ADDR);
-
 	for (i = 0; i < len / 2; i++)
-		iowrite32(buf16[i], denali->host + DENALI_HOST_DATA);
+		denali->host_write(denali, addr, buf16[i]);
 }
 
 static uint8_t denali_read_byte(struct mtd_info *mtd)
@@ -319,7 +315,7 @@ static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
 	if (ctrl & NAND_CTRL_CHANGE)
 		denali_reset_irq(denali);
 
-	denali_host_write(denali, DENALI_BANK(denali) | type, dat);
+	denali->host_write(denali, DENALI_BANK(denali) | type, dat);
 }
 
 static int denali_dev_ready(struct mtd_info *mtd)
@@ -389,7 +385,7 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
 		return 0;
 	}
 
-	max_bitflips = ecc_cor & ECC_COR_INFO__MAX_ERRORS;
+	max_bitflips = FIELD_GET(ECC_COR_INFO__MAX_ERRORS, ecc_cor);
 
 	/*
 	 * The register holds the maximum of per-sector corrected bitflips.
@@ -402,13 +398,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
 	return max_bitflips;
 }
 
-#define ECC_SECTOR(x)	(((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
-#define ECC_BYTE(x)	(((x) & ECC_ERROR_ADDRESS__OFFSET))
-#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
-#define ECC_ERROR_UNCORRECTABLE(x) ((x) & ERR_CORRECTION_INFO__ERROR_TYPE)
-#define ECC_ERR_DEVICE(x)	(((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
-#define ECC_LAST_ERR(x)		((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
-
 static int denali_sw_ecc_fixup(struct mtd_info *mtd,
 			       struct denali_nand_info *denali,
 			       unsigned long *uncor_ecc_flags, uint8_t *buf)
@@ -426,18 +415,20 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
 
 	do {
 		err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS);
-		err_sector = ECC_SECTOR(err_addr);
-		err_byte = ECC_BYTE(err_addr);
+		err_sector = FIELD_GET(ECC_ERROR_ADDRESS__SECTOR, err_addr);
+		err_byte = FIELD_GET(ECC_ERROR_ADDRESS__OFFSET, err_addr);
 
 		err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO);
-		err_cor_value = ECC_CORRECTION_VALUE(err_cor_info);
-		err_device = ECC_ERR_DEVICE(err_cor_info);
+		err_cor_value = FIELD_GET(ERR_CORRECTION_INFO__BYTE,
+					  err_cor_info);
+		err_device = FIELD_GET(ERR_CORRECTION_INFO__DEVICE,
+				       err_cor_info);
 
 		/* reset the bitflip counter when crossing ECC sector */
 		if (err_sector != prev_sector)
 			bitflips = 0;
 
-		if (ECC_ERROR_UNCORRECTABLE(err_cor_info)) {
+		if (err_cor_info & ERR_CORRECTION_INFO__UNCOR) {
 			/*
 			 * Check later if this is a real ECC error, or
 			 * an erased sector.
@@ -467,12 +458,11 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
 		}
 
 		prev_sector = err_sector;
-	} while (!ECC_LAST_ERR(err_cor_info));
+	} while (!(err_cor_info & ERR_CORRECTION_INFO__LAST_ERR));
 
 	/*
-	 * Once handle all ecc errors, controller will trigger a
-	 * ECC_TRANSACTION_DONE interrupt, so here just wait for
-	 * a while for this interrupt
+	 * Once handle all ECC errors, controller will trigger an
+	 * ECC_TRANSACTION_DONE interrupt.
 	 */
 	irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE);
 	if (!(irq_status & INTR__ECC_TRANSACTION_DONE))
@@ -481,13 +471,6 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
 	return max_bitflips;
 }
 
-/* programs the controller to either enable/disable DMA transfers */
-static void denali_enable_dma(struct denali_nand_info *denali, bool en)
-{
-	iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE);
-	ioread32(denali->reg + DMA_ENABLE);
-}
-
 static void denali_setup_dma64(struct denali_nand_info *denali,
 			       dma_addr_t dma_addr, int page, int write)
 {
@@ -502,14 +485,14 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
 	 * 1. setup transfer type, interrupt when complete,
 	 *    burst len = 64 bytes, the number of pages
 	 */
-	denali_host_write(denali, mode,
-			  0x01002000 | (64 << 16) | (write << 8) | page_count);
+	denali->host_write(denali, mode,
+			   0x01002000 | (64 << 16) | (write << 8) | page_count);
 
 	/* 2. set memory low address */
-	denali_host_write(denali, mode, dma_addr);
+	denali->host_write(denali, mode, lower_32_bits(dma_addr));
 
 	/* 3. set memory high address */
-	denali_host_write(denali, mode, (uint64_t)dma_addr >> 32);
+	denali->host_write(denali, mode, upper_32_bits(dma_addr));
 }
 
 static void denali_setup_dma32(struct denali_nand_info *denali,
@@ -523,32 +506,23 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
 	/* DMA is a four step process */
 
 	/* 1. setup transfer type and # of pages */
-	denali_host_write(denali, mode | page,
-			  0x2000 | (write << 8) | page_count);
+	denali->host_write(denali, mode | page,
+			   0x2000 | (write << 8) | page_count);
 
 	/* 2. set memory high address bits 23:8 */
-	denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
+	denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
 
 	/* 3. set memory low address bits 23:8 */
-	denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300);
+	denali->host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300);
 
 	/* 4. interrupt when complete, burst len = 64 bytes */
-	denali_host_write(denali, mode | 0x14000, 0x2400);
-}
-
-static void denali_setup_dma(struct denali_nand_info *denali,
-			     dma_addr_t dma_addr, int page, int write)
-{
-	if (denali->caps & DENALI_CAP_DMA_64BIT)
-		denali_setup_dma64(denali, dma_addr, page, write);
-	else
-		denali_setup_dma32(denali, dma_addr, page, write);
+	denali->host_write(denali, mode | 0x14000, 0x2400);
 }
 
 static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 			   size_t size, int page, int raw)
 {
-	uint32_t addr = DENALI_BANK(denali) | page;
+	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
 	uint32_t *buf32 = (uint32_t *)buf;
 	uint32_t irq_status, ecc_err_mask;
 	int i;
@@ -560,9 +534,8 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 
 	denali_reset_irq(denali);
 
-	iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
 	for (i = 0; i < size / 4; i++)
-		*buf32++ = ioread32(denali->host + DENALI_HOST_DATA);
+		*buf32++ = denali->host_read(denali, addr);
 
 	irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
 	if (!(irq_status & INTR__PAGE_XFER_INC))
@@ -577,16 +550,15 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 static int denali_pio_write(struct denali_nand_info *denali,
 			    const void *buf, size_t size, int page, int raw)
 {
-	uint32_t addr = DENALI_BANK(denali) | page;
+	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
 	const uint32_t *buf32 = (uint32_t *)buf;
 	uint32_t irq_status;
 	int i;
 
 	denali_reset_irq(denali);
 
-	iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
 	for (i = 0; i < size / 4; i++)
-		iowrite32(*buf32++, denali->host + DENALI_HOST_DATA);
+		denali->host_write(denali, addr, *buf32++);
 
 	irq_status = denali_wait_for_irq(denali,
 				INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL);
@@ -635,19 +607,19 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 		ecc_err_mask = INTR__ECC_ERR;
 	}
 
-	denali_enable_dma(denali, true);
+	iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE);
 
 	denali_reset_irq(denali);
-	denali_setup_dma(denali, dma_addr, page, write);
+	denali->setup_dma(denali, dma_addr, page, write);
 
-	/* wait for operation to complete */
 	irq_status = denali_wait_for_irq(denali, irq_mask);
 	if (!(irq_status & INTR__DMA_CMD_COMP))
 		ret = -EIO;
 	else if (irq_status & ecc_err_mask)
 		ret = -EBADMSG;
 
-	denali_enable_dma(denali, false);
+	iowrite32(0, denali->reg + DMA_ENABLE);
+
 	dma_unmap_single(denali->dev, dma_addr, size, dir);
 
 	if (irq_status & INTR__ERASED_PAGE)
@@ -659,7 +631,9 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
 			    size_t size, int page, int raw, int write)
 {
-	setup_ecc_for_xfer(denali, !raw, raw);
+	iowrite32(raw ? 0 : ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
+	iowrite32(raw ? TRANSFER_SPARE_REG__FLAG : 0,
+		  denali->reg + TRANSFER_SPARE_REG);
 
 	if (denali->dma_avail)
 		return denali_dma_xfer(denali, buf, size, page, raw, write);
@@ -970,8 +944,8 @@ static int denali_erase(struct mtd_info *mtd, int page)
 
 	denali_reset_irq(denali);
 
-	denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
-			  DENALI_ERASE);
+	denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
+			   DENALI_ERASE);
 
 	/* wait for erase to complete or failure to occur */
 	irq_status = denali_wait_for_irq(denali,
@@ -1009,7 +983,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
 
 	tmp = ioread32(denali->reg + ACC_CLKS);
 	tmp &= ~ACC_CLKS__VALUE;
-	tmp |= acc_clks;
+	tmp |= FIELD_PREP(ACC_CLKS__VALUE, acc_clks);
 	iowrite32(tmp, denali->reg + ACC_CLKS);
 
 	/* tRWH -> RE_2_WE */
@@ -1018,7 +992,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
 
 	tmp = ioread32(denali->reg + RE_2_WE);
 	tmp &= ~RE_2_WE__VALUE;
-	tmp |= re_2_we;
+	tmp |= FIELD_PREP(RE_2_WE__VALUE, re_2_we);
 	iowrite32(tmp, denali->reg + RE_2_WE);
 
 	/* tRHZ -> RE_2_RE */
@@ -1027,16 +1001,22 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
 
 	tmp = ioread32(denali->reg + RE_2_RE);
 	tmp &= ~RE_2_RE__VALUE;
-	tmp |= re_2_re;
+	tmp |= FIELD_PREP(RE_2_RE__VALUE, re_2_re);
 	iowrite32(tmp, denali->reg + RE_2_RE);
 
-	/* tWHR -> WE_2_RE */
-	we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk);
+	/*
+	 * tCCS, tWHR -> WE_2_RE
+	 *
+	 * With WE_2_RE properly set, the Denali controller automatically takes
+	 * care of the delay; the driver need not set NAND_WAIT_TCCS.
+	 */
+	we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min),
+			       t_clk);
 	we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE);
 
 	tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
 	tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE;
-	tmp |= we_2_re;
+	tmp |= FIELD_PREP(TWHR2_AND_WE_2_RE__WE_2_RE, we_2_re);
 	iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE);
 
 	/* tADL -> ADDR_2_DATA */
@@ -1050,8 +1030,8 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
 	addr_2_data = min_t(int, addr_2_data, addr_2_data_mask);
 
 	tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
-	tmp &= ~addr_2_data_mask;
-	tmp |= addr_2_data;
+	tmp &= ~TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
+	tmp |= FIELD_PREP(TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA, addr_2_data);
 	iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA);
 
 	/* tREH, tWH -> RDWR_EN_HI_CNT */
@@ -1061,7 +1041,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
 
 	tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
 	tmp &= ~RDWR_EN_HI_CNT__VALUE;
-	tmp |= rdwr_en_hi;
+	tmp |= FIELD_PREP(RDWR_EN_HI_CNT__VALUE, rdwr_en_hi);
 	iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT);
 
 	/* tRP, tWP -> RDWR_EN_LO_CNT */
@@ -1075,7 +1055,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
 
 	tmp = ioread32(denali->reg + RDWR_EN_LO_CNT);
 	tmp &= ~RDWR_EN_LO_CNT__VALUE;
-	tmp |= rdwr_en_lo;
+	tmp |= FIELD_PREP(RDWR_EN_LO_CNT__VALUE, rdwr_en_lo);
 	iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT);
 
 	/* tCS, tCEA -> CS_SETUP_CNT */
@@ -1086,7 +1066,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
 
 	tmp = ioread32(denali->reg + CS_SETUP_CNT);
 	tmp &= ~CS_SETUP_CNT__VALUE;
-	tmp |= cs_setup;
+	tmp |= FIELD_PREP(CS_SETUP_CNT__VALUE, cs_setup);
 	iowrite32(tmp, denali->reg + CS_SETUP_CNT);
 
 	return 0;
@@ -1131,15 +1111,11 @@ static void denali_hw_init(struct denali_nand_info *denali)
 	 * if this value is 0, just let it be.
 	 */
 	denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
-	detect_max_banks(denali);
+	denali_detect_max_banks(denali);
 	iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
 	iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
 
 	iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
-
-	/* Should set value for these registers when init */
-	iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES);
-	iowrite32(1, denali->reg + ECC_ENABLE);
 }
 
 int denali_calc_ecc_bytes(int step_size, int strength)
@@ -1211,22 +1187,6 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
 	.free = denali_ooblayout_free,
 };
 
-/* initialize driver data structures */
-static void denali_drv_init(struct denali_nand_info *denali)
-{
-	/*
-	 * the completion object will be used to notify
-	 * the callee that the interrupt is done
-	 */
-	init_completion(&denali->complete);
-
-	/*
-	 * the spinlock will be used to synchronize the ISR with any
-	 * element that might be access shared data (interrupt status)
-	 */
-	spin_lock_init(&denali->irq_lock);
-}
-
 static int denali_multidev_fixup(struct denali_nand_info *denali)
 {
 	struct nand_chip *chip = &denali->nand;
@@ -1282,15 +1242,17 @@ int denali_init(struct denali_nand_info *denali)
 {
 	struct nand_chip *chip = &denali->nand;
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	u32 features = ioread32(denali->reg + FEATURES);
 	int ret;
 
 	mtd->dev.parent = denali->dev;
 	denali_hw_init(denali);
-	denali_drv_init(denali);
+
+	init_completion(&denali->complete);
+	spin_lock_init(&denali->irq_lock);
 
 	denali_clear_irq_all(denali);
 
-	/* Request IRQ after all the hardware initialization is finished */
 	ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
 			       IRQF_SHARED, DENALI_NAND_NAME, denali);
 	if (ret) {
@@ -1308,7 +1270,6 @@ int denali_init(struct denali_nand_info *denali)
 	if (!mtd->name)
 		mtd->name = "denali-nand";
 
-	/* register the driver with the NAND core subsystem */
 	chip->select_chip = denali_select_chip;
 	chip->read_byte = denali_read_byte;
 	chip->write_byte = denali_write_byte;
@@ -1317,15 +1278,18 @@ int denali_init(struct denali_nand_info *denali)
 	chip->dev_ready = denali_dev_ready;
 	chip->waitfunc = denali_waitfunc;
 
+	if (features & FEATURES__INDEX_ADDR) {
+		denali->host_read = denali_indexed_read;
+		denali->host_write = denali_indexed_write;
+	} else {
+		denali->host_read = denali_direct_read;
+		denali->host_write = denali_direct_write;
+	}
+
 	/* clk rate info is needed for setup_data_interface */
 	if (denali->clk_x_rate)
 		chip->setup_data_interface = denali_setup_data_interface;
 
-	/*
-	 * scan for NAND devices attached to the controller
-	 * this is the first stage in a two step process to register
-	 * with the nand subsystem
-	 */
 	ret = nand_scan_ident(mtd, denali->max_banks, NULL);
 	if (ret)
 		goto disable_irq;
@@ -1347,20 +1311,15 @@ int denali_init(struct denali_nand_info *denali)
 	if (denali->dma_avail) {
 		chip->options |= NAND_USE_BOUNCE_BUFFER;
 		chip->buf_align = 16;
+		if (denali->caps & DENALI_CAP_DMA_64BIT)
+			denali->setup_dma = denali_setup_dma64;
+		else
+			denali->setup_dma = denali_setup_dma32;
 	}
 
-	/*
-	 * second stage of the NAND scan
-	 * this stage requires information regarding ECC and
-	 * bad block management.
-	 */
-
 	chip->bbt_options |= NAND_BBT_USE_FLASH;
 	chip->bbt_options |= NAND_BBT_NO_OOB;
-
 	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-
-	/* no subpage writes on denali */
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
 
 	ret = denali_ecc_setup(mtd, chip, denali);
@@ -1373,12 +1332,15 @@ int denali_init(struct denali_nand_info *denali)
 		"chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
 		chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
 
-	iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1),
+	iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
+		  FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
 		  denali->reg + ECC_CORRECTION);
 	iowrite32(mtd->erasesize / mtd->writesize,
 		  denali->reg + PAGES_PER_BLOCK);
 	iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
 		  denali->reg + DEVICE_WIDTH);
+	iowrite32(chip->options & NAND_ROW_ADDR_3 ? 0 : TWO_ROW_ADDR_CYCLES__FLAG,
+		  denali->reg + TWO_ROW_ADDR_CYCLES);
 	iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
 	iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
 
@@ -1441,7 +1403,6 @@ disable_irq:
 }
 EXPORT_SYMBOL(denali_init);
 
-/* driver exit point */
 void denali_remove(struct denali_nand_info *denali)
 {
 	struct mtd_info *mtd = nand_to_mtd(&denali->nand);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 9239e6793e6e..2911066dacac 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -10,18 +10,16 @@
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  */
 
 #ifndef __DENALI_H__
 #define __DENALI_H__
 
 #include <linux/bitops.h>
+#include <linux/completion.h>
 #include <linux/mtd/rawnand.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
 
 #define DEVICE_RESET				0x0
 #define     DEVICE_RESET__BANK(bank)			BIT(bank)
@@ -111,9 +109,6 @@
 #define ECC_CORRECTION				0x1b0
 #define     ECC_CORRECTION__VALUE			GENMASK(4, 0)
 #define     ECC_CORRECTION__ERASE_THRESHOLD		GENMASK(31, 16)
-#define     MAKE_ECC_CORRECTION(val, thresh)		\
-			(((val) & (ECC_CORRECTION__VALUE)) | \
-			(((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD)))
 
 #define READ_MODE				0x1c0
 #define     READ_MODE__VALUE				GENMASK(3, 0)
@@ -255,13 +250,13 @@
 
 #define ECC_ERROR_ADDRESS			0x630
 #define     ECC_ERROR_ADDRESS__OFFSET			GENMASK(11, 0)
-#define     ECC_ERROR_ADDRESS__SECTOR_NR		GENMASK(15, 12)
+#define     ECC_ERROR_ADDRESS__SECTOR			GENMASK(15, 12)
 
 #define ERR_CORRECTION_INFO			0x640
-#define     ERR_CORRECTION_INFO__BYTEMASK		GENMASK(7, 0)
-#define     ERR_CORRECTION_INFO__DEVICE_NR		GENMASK(11, 8)
-#define     ERR_CORRECTION_INFO__ERROR_TYPE		BIT(14)
-#define     ERR_CORRECTION_INFO__LAST_ERR_INFO		BIT(15)
+#define     ERR_CORRECTION_INFO__BYTE			GENMASK(7, 0)
+#define     ERR_CORRECTION_INFO__DEVICE			GENMASK(11, 8)
+#define     ERR_CORRECTION_INFO__UNCOR			BIT(14)
+#define     ERR_CORRECTION_INFO__LAST_ERR		BIT(15)
 
 #define ECC_COR_INFO(bank)			(0x650 + (bank) / 2 * 0x10)
 #define     ECC_COR_INFO__SHIFT(bank)			((bank) % 2 * 8)
@@ -310,23 +305,24 @@ struct denali_nand_info {
 	struct device *dev;
 	void __iomem *reg;		/* Register Interface */
 	void __iomem *host;		/* Host Data/Command Interface */
-
-	/* elements used by ISR */
 	struct completion complete;
-	spinlock_t irq_lock;
-	uint32_t irq_mask;
-	uint32_t irq_status;
+	spinlock_t irq_lock;		/* protect irq_mask and irq_status */
+	u32 irq_mask;			/* interrupts we are waiting for */
+	u32 irq_status;			/* interrupts that have happened */
 	int irq;
-
-	void *buf;
+	void *buf;			/* for syndrome layout conversion */
 	dma_addr_t dma_addr;
-	int dma_avail;
+	int dma_avail;			/* can support DMA? */
 	int devs_per_cs;		/* devices connected in parallel */
-	int oob_skip_bytes;
+	int oob_skip_bytes;		/* number of bytes reserved for BBM */
 	int max_banks;
-	unsigned int revision;
-	unsigned int caps;
+	unsigned int revision;		/* IP revision */
+	unsigned int caps;		/* IP capability (or quirk) */
 	const struct nand_ecc_caps *ecc_caps;
+	u32 (*host_read)(struct denali_nand_info *denali, u32 addr);
+	void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data);
+	void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr,
+			  int page, int write);
 };
 
 #define DENALI_CAP_HW_ECC_FIXUP			BIT(0)
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index 56e2e177644d..cfd33e6ca77f 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -12,15 +12,16 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  */
+
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 
 #include "denali.h"
 
@@ -155,7 +156,6 @@ static struct platform_driver denali_dt_driver = {
 		.of_match_table	= denali_nand_dt_ids,
 	},
 };
-
 module_platform_driver(denali_dt_driver);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
index 81370c79aa48..57fb7ae31412 100644
--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -11,6 +11,9 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  */
+
+#include <linux/errno.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -106,7 +109,6 @@ failed_remap_reg:
 	return ret;
 }
 
-/* driver exit point */
 static void denali_pci_remove(struct pci_dev *dev)
 {
 	struct denali_nand_info *denali = pci_get_drvdata(dev);
@@ -122,5 +124,4 @@ static struct pci_driver denali_pci_driver = {
 	.probe = denali_pci_probe,
 	.remove = denali_pci_remove,
 };
-
 module_pci_driver(denali_pci_driver);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index c3aa53caab5c..72671dc52e2e 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -705,8 +705,7 @@ static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int colu
 		if (page_addr != -1) {
 			WriteDOC((unsigned char)(page_addr & 0xff), docptr, Mplus_FlashAddress);
 			WriteDOC((unsigned char)((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
-			/* One more address cycle for higher density devices */
-			if (this->chipsize & 0x0c000000) {
+			if (this->options & NAND_ROW_ADDR_3) {
 				WriteDOC((unsigned char)((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
 				printk("high density\n");
 			}
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index fd3648952b5a..484f7fbc3f7d 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
@@ -31,12 +31,16 @@
 #include <linux/mtd/nand-gpio.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_gpio.h>
 
 struct gpiomtd {
 	void __iomem		*io_sync;
 	struct nand_chip	nand_chip;
 	struct gpio_nand_platdata plat;
+	struct gpio_desc *nce; /* Optional chip enable */
+	struct gpio_desc *cle;
+	struct gpio_desc *ale;
+	struct gpio_desc *rdy;
+	struct gpio_desc *nwp; /* Optional write protection */
 };
 
 static inline struct gpiomtd *gpio_nand_getpriv(struct mtd_info *mtd)
@@ -78,11 +82,10 @@ static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 	gpio_nand_dosync(gpiomtd);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		if (gpio_is_valid(gpiomtd->plat.gpio_nce))
-			gpio_set_value(gpiomtd->plat.gpio_nce,
-				       !(ctrl & NAND_NCE));
-		gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
-		gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
+		if (gpiomtd->nce)
+			gpiod_set_value(gpiomtd->nce, !(ctrl & NAND_NCE));
+		gpiod_set_value(gpiomtd->cle, !!(ctrl & NAND_CLE));
+		gpiod_set_value(gpiomtd->ale, !!(ctrl & NAND_ALE));
 		gpio_nand_dosync(gpiomtd);
 	}
 	if (cmd == NAND_CMD_NONE)
@@ -96,7 +99,7 @@ static int gpio_nand_devready(struct mtd_info *mtd)
 {
 	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
 
-	return gpio_get_value(gpiomtd->plat.gpio_rdy);
+	return gpiod_get_value(gpiomtd->rdy);
 }
 
 #ifdef CONFIG_OF
@@ -123,12 +126,6 @@ static int gpio_nand_get_config_of(const struct device *dev,
 		}
 	}
 
-	plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
-	plat->gpio_nce = of_get_gpio(dev->of_node, 1);
-	plat->gpio_ale = of_get_gpio(dev->of_node, 2);
-	plat->gpio_cle = of_get_gpio(dev->of_node, 3);
-	plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
-
 	if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
 		plat->chip_delay = val;
 
@@ -201,10 +198,11 @@ static int gpio_nand_remove(struct platform_device *pdev)
 
 	nand_release(nand_to_mtd(&gpiomtd->nand_chip));
 
-	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
-		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
-	if (gpio_is_valid(gpiomtd->plat.gpio_nce))
-		gpio_set_value(gpiomtd->plat.gpio_nce, 1);
+	/* Enable write protection and disable the chip */
+	if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+		gpiod_set_value(gpiomtd->nwp, 0);
+	if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
+		gpiod_set_value(gpiomtd->nce, 0);
 
 	return 0;
 }
@@ -215,66 +213,66 @@ static int gpio_nand_probe(struct platform_device *pdev)
 	struct nand_chip *chip;
 	struct mtd_info *mtd;
 	struct resource *res;
+	struct device *dev = &pdev->dev;
 	int ret = 0;
 
-	if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev))
+	if (!dev->of_node && !dev_get_platdata(dev))
 		return -EINVAL;
 
-	gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
+	gpiomtd = devm_kzalloc(dev, sizeof(*gpiomtd), GFP_KERNEL);
 	if (!gpiomtd)
 		return -ENOMEM;
 
 	chip = &gpiomtd->nand_chip;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+	chip->IO_ADDR_R = devm_ioremap_resource(dev, res);
 	if (IS_ERR(chip->IO_ADDR_R))
 		return PTR_ERR(chip->IO_ADDR_R);
 
 	res = gpio_nand_get_io_sync(pdev);
 	if (res) {
-		gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res);
+		gpiomtd->io_sync = devm_ioremap_resource(dev, res);
 		if (IS_ERR(gpiomtd->io_sync))
 			return PTR_ERR(gpiomtd->io_sync);
 	}
 
-	ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat);
+	ret = gpio_nand_get_config(dev, &gpiomtd->plat);
 	if (ret)
 		return ret;
 
-	if (gpio_is_valid(gpiomtd->plat.gpio_nce)) {
-		ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce,
-					"NAND NCE");
-		if (ret)
-			return ret;
-		gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
+	/* Just enable the chip */
+	gpiomtd->nce = devm_gpiod_get_optional(dev, "nce", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiomtd->nce))
+		return PTR_ERR(gpiomtd->nce);
+
+	/* We disable write protection once we know probe() will succeed */
+	gpiomtd->nwp = devm_gpiod_get_optional(dev, "nwp", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiomtd->nwp)) {
+		ret = PTR_ERR(gpiomtd->nwp);
+		goto out_ce;
 	}
 
-	if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
-		ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
-					"NAND NWP");
-		if (ret)
-			return ret;
+	gpiomtd->nwp = devm_gpiod_get(dev, "ale", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiomtd->nwp)) {
+		ret = PTR_ERR(gpiomtd->nwp);
+		goto out_ce;
 	}
 
-	ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
-	if (ret)
-		return ret;
-	gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
+	gpiomtd->cle = devm_gpiod_get(dev, "cle", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiomtd->cle)) {
+		ret = PTR_ERR(gpiomtd->cle);
+		goto out_ce;
+	}
 
-	ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
-	if (ret)
-		return ret;
-	gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
-
-	if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
-		ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
-					"NAND RDY");
-		if (ret)
-			return ret;
-		gpio_direction_input(gpiomtd->plat.gpio_rdy);
-		chip->dev_ready = gpio_nand_devready;
+	gpiomtd->rdy = devm_gpiod_get_optional(dev, "rdy", GPIOD_IN);
+	if (IS_ERR(gpiomtd->rdy)) {
+		ret = PTR_ERR(gpiomtd->rdy);
+		goto out_ce;
 	}
+	/* Using RDY pin */
+	if (gpiomtd->rdy)
+		chip->dev_ready = gpio_nand_devready;
 
 	nand_set_flash_node(chip, pdev->dev.of_node);
 	chip->IO_ADDR_W		= chip->IO_ADDR_R;
@@ -285,12 +283,13 @@ static int gpio_nand_probe(struct platform_device *pdev)
 	chip->cmd_ctrl		= gpio_nand_cmd_ctrl;
 
 	mtd			= nand_to_mtd(chip);
-	mtd->dev.parent		= &pdev->dev;
+	mtd->dev.parent		= dev;
 
 	platform_set_drvdata(pdev, gpiomtd);
 
-	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
-		gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
+	/* Disable write protection, if wired up */
+	if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+		gpiod_direction_output(gpiomtd->nwp, 1);
 
 	ret = nand_scan(mtd, 1);
 	if (ret)
@@ -305,8 +304,11 @@ static int gpio_nand_probe(struct platform_device *pdev)
 		return 0;
 
 err_wp:
-	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
-		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+	if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+		gpiod_set_value(gpiomtd->nwp, 0);
+out_ce:
+	if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
+		gpiod_set_value(gpiomtd->nce, 0);
 
 	return ret;
 }
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index d9ee1a7e6956..0897261c3e17 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -432,8 +432,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr)
 		host->addr_value[0] |= (page_addr & 0xffff)
 			<< (host->addr_cycle * 8);
 		host->addr_cycle    += 2;
-		/* One more address cycle for devices > 128MiB */
-		if (chip->chipsize > (128 << 20)) {
+		if (chip->options & NAND_ROW_ADDR_3) {
 			host->addr_cycle += 1;
 			if (host->command == NAND_CMD_ERASE1)
 				host->addr_value[0] |= ((page_addr >> 16) & 0xff) << 16;
diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c
index 7f3b065b6b8f..c51d214d169e 100644
--- a/drivers/mtd/nand/mtk_ecc.c
+++ b/drivers/mtd/nand/mtk_ecc.c
@@ -115,6 +115,11 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id)
 		op = ECC_DECODE;
 		dec = readw(ecc->regs + ECC_DECDONE);
 		if (dec & ecc->sectors) {
+			/*
+			 * Clear decode IRQ status once again to ensure that
+			 * there will be no extra IRQ.
+			 */
+			readw(ecc->regs + ECC_DECIRQ_STA);
 			ecc->sectors = 0;
 			complete(&ecc->done);
 		} else {
@@ -130,8 +135,6 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id)
 		}
 	}
 
-	writel(0, ecc->regs + ECC_IRQ_REG(op));
-
 	return IRQ_HANDLED;
 }
 
@@ -307,6 +310,12 @@ void mtk_ecc_disable(struct mtk_ecc *ecc)
 
 	/* disable it */
 	mtk_ecc_wait_idle(ecc, op);
+	if (op == ECC_DECODE)
+		/*
+		 * Clear decode IRQ status in case there is a timeout to wait
+		 * decode IRQ.
+		 */
+		readw(ecc->regs + ECC_DECIRQ_STA);
 	writew(0, ecc->regs + ECC_IRQ_REG(op));
 	writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op));
 
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 53e5e0337c3e..f3be0b2a8869 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -415,7 +415,7 @@ static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
  * waits for completion. */
 static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 {
-	pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+	dev_dbg(host->dev, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
 
 	writew(cmd, NFC_V1_V2_FLASH_CMD);
 	writew(NFC_CMD, NFC_V1_V2_CONFIG2);
@@ -431,7 +431,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 			udelay(1);
 		}
 		if (max_retries < 0)
-			pr_debug("%s: RESET failed\n", __func__);
+			dev_dbg(host->dev, "%s: RESET failed\n", __func__);
 	} else {
 		/* Wait for operation to complete */
 		wait_op_done(host, useirq);
@@ -454,7 +454,7 @@ static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
  * a NAND command. */
 static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
 {
-	pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
+	dev_dbg(host->dev, "send_addr(host, 0x%x %d)\n", addr, islast);
 
 	writew(addr, NFC_V1_V2_FLASH_ADDR);
 	writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
@@ -607,7 +607,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
 	uint16_t ecc_status = get_ecc_status_v1(host);
 
 	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
-		pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+		dev_dbg(host->dev, "HWECC uncorrectable 2-bit ECC error\n");
 		return -EBADMSG;
 	}
 
@@ -634,7 +634,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
 	do {
 		err = ecc_stat & ecc_bit_mask;
 		if (err > err_limit) {
-			printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+			dev_dbg(host->dev, "UnCorrectable RS-ECC Error\n");
 			return -EBADMSG;
 		} else {
 			ret += err;
@@ -642,7 +642,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
 		ecc_stat >>= 4;
 	} while (--no_subpages);
 
-	pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+	dev_dbg(host->dev, "%d Symbol Correctable RS-ECC Error\n", ret);
 
 	return ret;
 }
@@ -673,7 +673,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 		host->buf_start++;
 	}
 
-	pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
+	dev_dbg(host->dev, "%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
 	return ret;
 }
 
@@ -859,8 +859,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 				host->devtype_data->send_addr(host,
 						(page_addr >> 8) & 0xff, true);
 		} else {
-			/* One more address cycle for higher density devices */
-			if (mtd->size >= 0x4000000) {
+			if (nand_chip->options & NAND_ROW_ADDR_3) {
 				/* paddr_8 - paddr_15 */
 				host->devtype_data->send_addr(host,
 						(page_addr >> 8) & 0xff,
@@ -1212,7 +1211,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	struct nand_chip *nand_chip = mtd_to_nand(mtd);
 	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
 
-	pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+	dev_dbg(host->dev, "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
 	      command, column, page_addr);
 
 	/* Reset command state information */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 12edaae17d81..6135d007a068 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -115,7 +115,7 @@ static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
-	if (section)
+	if (section || !ecc->total)
 		return -ERANGE;
 
 	oobregion->length = ecc->total;
@@ -727,8 +727,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 		chip->cmd_ctrl(mtd, page_addr, ctrl);
 		ctrl &= ~NAND_CTRL_CHANGE;
 		chip->cmd_ctrl(mtd, page_addr >> 8, ctrl);
-		/* One more address cycle for devices > 32MiB */
-		if (chip->chipsize > (32 << 20))
+		if (chip->options & NAND_ROW_ADDR_3)
 			chip->cmd_ctrl(mtd, page_addr >> 16, ctrl);
 	}
 	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
@@ -854,8 +853,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			chip->cmd_ctrl(mtd, page_addr, ctrl);
 			chip->cmd_ctrl(mtd, page_addr >> 8,
 				       NAND_NCE | NAND_ALE);
-			/* One more address cycle for devices > 128MiB */
-			if (chip->chipsize > (128 << 20))
+			if (chip->options & NAND_ROW_ADDR_3)
 				chip->cmd_ctrl(mtd, page_addr >> 16,
 					       NAND_NCE | NAND_ALE);
 		}
@@ -1246,6 +1244,7 @@ int nand_reset(struct nand_chip *chip, int chipnr)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(nand_reset);
 
 /**
  * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data
@@ -2799,15 +2798,18 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, const uint8_t *buf)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	int chipnr = (int)(to >> chip->chip_shift);
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Wait for the device to get ready */
-	panic_nand_wait(mtd, chip, 400);
-
 	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);
 
+	chip->select_chip(mtd, chipnr);
+
+	/* Wait for the device to get ready */
+	panic_nand_wait(mtd, chip, 400);
+
 	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
@@ -3999,6 +4001,9 @@ ident_done:
 		chip->chip_shift += 32 - 1;
 	}
 
+	if (chip->chip_shift - chip->page_shift > 16)
+		chip->options |= NAND_ROW_ADDR_3;
+
 	chip->badblockbits = 8;
 	chip->erase = single_erase;
 
@@ -4700,6 +4705,19 @@ int nand_scan_tail(struct mtd_info *mtd)
 			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
 			break;
 		default:
+			/*
+			 * Expose the whole OOB area to users if ECC_NONE
+			 * is passed. We could do that for all kind of
+			 * ->oobsize, but we must keep the old large/small
+			 * page with ECC layout when ->oobsize <= 128 for
+			 * compatibility reasons.
+			 */
+			if (ecc->mode == NAND_ECC_NONE) {
+				mtd_set_ooblayout(mtd,
+						&nand_ooblayout_lp_ops);
+				break;
+			}
+
 			WARN(1, "No oob scheme defined for oobsize %d\n",
 				mtd->oobsize);
 			ret = -EINVAL;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 246b4393118e..44322a363ba5 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -520,11 +520,16 @@ static int nandsim_debugfs_create(struct nandsim *dev)
 	struct dentry *root = nsmtd->dbg.dfs_dir;
 	struct dentry *dent;
 
-	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+	/*
+	 * Just skip debugfs initialization when the debugfs directory is
+	 * missing.
+	 */
+	if (IS_ERR_OR_NULL(root)) {
+		if (IS_ENABLED(CONFIG_DEBUG_FS) &&
+		    !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER))
+			NS_WARN("CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n");
 		return 0;
-
-	if (IS_ERR_OR_NULL(root))
-		return -1;
+	}
 
 	dent = debugfs_create_file("nandsim_wear_report", S_IRUSR,
 				   root, dev, &dfs_fops);
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 7bb4d2ea9342..af5b32c9a791 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -154,7 +154,7 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
 		if (page_addr != -1) {
 			write_addr_reg(nand, page_addr);
 
-			if (chip->chipsize > (128 << 20)) {
+			if (chip->options & NAND_ROW_ADDR_3) {
 				write_addr_reg(nand, page_addr >> 8);
 				write_addr_reg(nand, page_addr >> 16 | ENDADDR);
 			} else {
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 54540c8fa1a2..dad438c4906a 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1133,129 +1133,172 @@ static u8  bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
 				0x97, 0x79, 0xe5, 0x24, 0xb5};
 
 /**
- * omap_calculate_ecc_bch - Generate bytes of ECC bytes
+ * _omap_calculate_ecc_bch - Generate ECC bytes for one sector
  * @mtd:	MTD device structure
  * @dat:	The pointer to data on which ecc is computed
  * @ecc_code:	The ecc_code buffer
+ * @i:		The sector number (for a multi sector page)
  *
- * Support calculating of BCH4/8 ecc vectors for the page
+ * Support calculating of BCH4/8/16 ECC vectors for one sector
+ * within a page. Sector number is in @i.
  */
-static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
-					const u_char *dat, u_char *ecc_calc)
+static int _omap_calculate_ecc_bch(struct mtd_info *mtd,
+				   const u_char *dat, u_char *ecc_calc, int i)
 {
 	struct omap_nand_info *info = mtd_to_omap(mtd);
 	int eccbytes	= info->nand.ecc.bytes;
 	struct gpmc_nand_regs	*gpmc_regs = &info->reg;
 	u8 *ecc_code;
-	unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
+	unsigned long bch_val1, bch_val2, bch_val3, bch_val4;
 	u32 val;
-	int i, j;
+	int j;
+
+	ecc_code = ecc_calc;
+	switch (info->ecc_opt) {
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+	case OMAP_ECC_BCH8_CODE_HW:
+		bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+		bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+		bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
+		bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
+		*ecc_code++ = (bch_val4 & 0xFF);
+		*ecc_code++ = ((bch_val3 >> 24) & 0xFF);
+		*ecc_code++ = ((bch_val3 >> 16) & 0xFF);
+		*ecc_code++ = ((bch_val3 >> 8) & 0xFF);
+		*ecc_code++ = (bch_val3 & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 24) & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 16) & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 8) & 0xFF);
+		*ecc_code++ = (bch_val2 & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 24) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 16) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 8) & 0xFF);
+		*ecc_code++ = (bch_val1 & 0xFF);
+		break;
+	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+	case OMAP_ECC_BCH4_CODE_HW:
+		bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+		bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+		*ecc_code++ = ((bch_val2 >> 12) & 0xFF);
+		*ecc_code++ = ((bch_val2 >> 4) & 0xFF);
+		*ecc_code++ = ((bch_val2 & 0xF) << 4) |
+			((bch_val1 >> 28) & 0xF);
+		*ecc_code++ = ((bch_val1 >> 20) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 12) & 0xFF);
+		*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
+		*ecc_code++ = ((bch_val1 & 0xF) << 4);
+		break;
+	case OMAP_ECC_BCH16_CODE_HW:
+		val = readl(gpmc_regs->gpmc_bch_result6[i]);
+		ecc_code[0]  = ((val >>  8) & 0xFF);
+		ecc_code[1]  = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result5[i]);
+		ecc_code[2]  = ((val >> 24) & 0xFF);
+		ecc_code[3]  = ((val >> 16) & 0xFF);
+		ecc_code[4]  = ((val >>  8) & 0xFF);
+		ecc_code[5]  = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result4[i]);
+		ecc_code[6]  = ((val >> 24) & 0xFF);
+		ecc_code[7]  = ((val >> 16) & 0xFF);
+		ecc_code[8]  = ((val >>  8) & 0xFF);
+		ecc_code[9]  = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result3[i]);
+		ecc_code[10] = ((val >> 24) & 0xFF);
+		ecc_code[11] = ((val >> 16) & 0xFF);
+		ecc_code[12] = ((val >>  8) & 0xFF);
+		ecc_code[13] = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result2[i]);
+		ecc_code[14] = ((val >> 24) & 0xFF);
+		ecc_code[15] = ((val >> 16) & 0xFF);
+		ecc_code[16] = ((val >>  8) & 0xFF);
+		ecc_code[17] = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result1[i]);
+		ecc_code[18] = ((val >> 24) & 0xFF);
+		ecc_code[19] = ((val >> 16) & 0xFF);
+		ecc_code[20] = ((val >>  8) & 0xFF);
+		ecc_code[21] = ((val >>  0) & 0xFF);
+		val = readl(gpmc_regs->gpmc_bch_result0[i]);
+		ecc_code[22] = ((val >> 24) & 0xFF);
+		ecc_code[23] = ((val >> 16) & 0xFF);
+		ecc_code[24] = ((val >>  8) & 0xFF);
+		ecc_code[25] = ((val >>  0) & 0xFF);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* ECC scheme specific syndrome customizations */
+	switch (info->ecc_opt) {
+	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+		/* Add constant polynomial to remainder, so that
+		 * ECC of blank pages results in 0x0 on reading back
+		 */
+		for (j = 0; j < eccbytes; j++)
+			ecc_calc[j] ^= bch4_polynomial[j];
+		break;
+	case OMAP_ECC_BCH4_CODE_HW:
+		/* Set  8th ECC byte as 0x0 for ROM compatibility */
+		ecc_calc[eccbytes - 1] = 0x0;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+		/* Add constant polynomial to remainder, so that
+		 * ECC of blank pages results in 0x0 on reading back
+		 */
+		for (j = 0; j < eccbytes; j++)
+			ecc_calc[j] ^= bch8_polynomial[j];
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		/* Set 14th ECC byte as 0x0 for ROM compatibility */
+		ecc_calc[eccbytes - 1] = 0x0;
+		break;
+	case OMAP_ECC_BCH16_CODE_HW:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used
+ * when SW based correction is required as ECC is required for one sector
+ * at a time.
+ */
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd,
+				     const u_char *dat, u_char *ecc_calc)
+{
+	return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0);
+}
+
+/**
+ * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go.
+ */
+static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd,
+					const u_char *dat, u_char *ecc_calc)
+{
+	struct omap_nand_info *info = mtd_to_omap(mtd);
+	int eccbytes = info->nand.ecc.bytes;
+	unsigned long nsectors;
+	int i, ret;
 
 	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
 	for (i = 0; i < nsectors; i++) {
-		ecc_code = ecc_calc;
-		switch (info->ecc_opt) {
-		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
-		case OMAP_ECC_BCH8_CODE_HW:
-			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
-			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
-			bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
-			bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
-			*ecc_code++ = (bch_val4 & 0xFF);
-			*ecc_code++ = ((bch_val3 >> 24) & 0xFF);
-			*ecc_code++ = ((bch_val3 >> 16) & 0xFF);
-			*ecc_code++ = ((bch_val3 >> 8) & 0xFF);
-			*ecc_code++ = (bch_val3 & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 24) & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 16) & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 8) & 0xFF);
-			*ecc_code++ = (bch_val2 & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 24) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 16) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 8) & 0xFF);
-			*ecc_code++ = (bch_val1 & 0xFF);
-			break;
-		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
-		case OMAP_ECC_BCH4_CODE_HW:
-			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
-			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
-			*ecc_code++ = ((bch_val2 >> 12) & 0xFF);
-			*ecc_code++ = ((bch_val2 >> 4) & 0xFF);
-			*ecc_code++ = ((bch_val2 & 0xF) << 4) |
-				((bch_val1 >> 28) & 0xF);
-			*ecc_code++ = ((bch_val1 >> 20) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 12) & 0xFF);
-			*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
-			*ecc_code++ = ((bch_val1 & 0xF) << 4);
-			break;
-		case OMAP_ECC_BCH16_CODE_HW:
-			val = readl(gpmc_regs->gpmc_bch_result6[i]);
-			ecc_code[0]  = ((val >>  8) & 0xFF);
-			ecc_code[1]  = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result5[i]);
-			ecc_code[2]  = ((val >> 24) & 0xFF);
-			ecc_code[3]  = ((val >> 16) & 0xFF);
-			ecc_code[4]  = ((val >>  8) & 0xFF);
-			ecc_code[5]  = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result4[i]);
-			ecc_code[6]  = ((val >> 24) & 0xFF);
-			ecc_code[7]  = ((val >> 16) & 0xFF);
-			ecc_code[8]  = ((val >>  8) & 0xFF);
-			ecc_code[9]  = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result3[i]);
-			ecc_code[10] = ((val >> 24) & 0xFF);
-			ecc_code[11] = ((val >> 16) & 0xFF);
-			ecc_code[12] = ((val >>  8) & 0xFF);
-			ecc_code[13] = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result2[i]);
-			ecc_code[14] = ((val >> 24) & 0xFF);
-			ecc_code[15] = ((val >> 16) & 0xFF);
-			ecc_code[16] = ((val >>  8) & 0xFF);
-			ecc_code[17] = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result1[i]);
-			ecc_code[18] = ((val >> 24) & 0xFF);
-			ecc_code[19] = ((val >> 16) & 0xFF);
-			ecc_code[20] = ((val >>  8) & 0xFF);
-			ecc_code[21] = ((val >>  0) & 0xFF);
-			val = readl(gpmc_regs->gpmc_bch_result0[i]);
-			ecc_code[22] = ((val >> 24) & 0xFF);
-			ecc_code[23] = ((val >> 16) & 0xFF);
-			ecc_code[24] = ((val >>  8) & 0xFF);
-			ecc_code[25] = ((val >>  0) & 0xFF);
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		/* ECC scheme specific syndrome customizations */
-		switch (info->ecc_opt) {
-		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
-			/* Add constant polynomial to remainder, so that
-			 * ECC of blank pages results in 0x0 on reading back */
-			for (j = 0; j < eccbytes; j++)
-				ecc_calc[j] ^= bch4_polynomial[j];
-			break;
-		case OMAP_ECC_BCH4_CODE_HW:
-			/* Set  8th ECC byte as 0x0 for ROM compatibility */
-			ecc_calc[eccbytes - 1] = 0x0;
-			break;
-		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
-			/* Add constant polynomial to remainder, so that
-			 * ECC of blank pages results in 0x0 on reading back */
-			for (j = 0; j < eccbytes; j++)
-				ecc_calc[j] ^= bch8_polynomial[j];
-			break;
-		case OMAP_ECC_BCH8_CODE_HW:
-			/* Set 14th ECC byte as 0x0 for ROM compatibility */
-			ecc_calc[eccbytes - 1] = 0x0;
-			break;
-		case OMAP_ECC_BCH16_CODE_HW:
-			break;
-		default:
-			return -EINVAL;
-		}
+		ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i);
+		if (ret)
+			return ret;
 
-	ecc_calc += eccbytes;
+		ecc_calc += eccbytes;
 	}
 
 	return 0;
@@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->write_buf(mtd, buf, mtd->writesize);
 
 	/* Update ecc vector from GPMC result registers */
-	chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+	omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]);
 
 	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
 					 chip->ecc.total);
@@ -1509,6 +1552,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /**
+ * omap_write_subpage_bch - BCH hardware ECC based subpage write
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @offset:	column address of subpage within the page
+ * @data_len:	data length
+ * @buf:	data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ *
+ * OMAP optimized subpage write method.
+ */
+static int omap_write_subpage_bch(struct mtd_info *mtd,
+				  struct nand_chip *chip, u32 offset,
+				  u32 data_len, const u8 *buf,
+				  int oob_required, int page)
+{
+	u8 *ecc_calc = chip->buffers->ecccalc;
+	int ecc_size      = chip->ecc.size;
+	int ecc_bytes     = chip->ecc.bytes;
+	int ecc_steps     = chip->ecc.steps;
+	u32 start_step = offset / ecc_size;
+	u32 end_step   = (offset + data_len - 1) / ecc_size;
+	int step, ret = 0;
+
+	/*
+	 * Write entire page at one go as it would be optimal
+	 * as ECC is calculated by hardware.
+	 * ECC is calculated for all subpages but we choose
+	 * only what we want.
+	 */
+
+	/* Enable GPMC ECC engine */
+	chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+	/* Write data */
+	chip->write_buf(mtd, buf, mtd->writesize);
+
+	for (step = 0; step < ecc_steps; step++) {
+		/* mask ECC of un-touched subpages by padding 0xFF */
+		if (step < start_step || step > end_step)
+			memset(ecc_calc, 0xff, ecc_bytes);
+		else
+			ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step);
+
+		if (ret)
+			return ret;
+
+		buf += ecc_size;
+		ecc_calc += ecc_bytes;
+	}
+
+	/* copy calculated ECC for whole page to chip->buffer->oob */
+	/* this include masked-value(0xFF) for unwritten subpages */
+	ecc_calc = chip->buffers->ecccalc;
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
+
+	/* write OOB buffer to NAND device */
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+/**
  * omap_read_page_bch - BCH ecc based page read function for entire page
  * @mtd:		mtd info structure
  * @chip:		nand chip info structure
@@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 		       chip->ecc.total);
 
 	/* Calculate ecc bytes */
-	chip->ecc.calculate(mtd, buf, ecc_calc);
+	omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc);
 
 	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
 					 chip->ecc.total);
@@ -1588,8 +1697,7 @@ static bool is_elm_present(struct omap_nand_info *info,
 	return true;
 }
 
-static bool omap2_nand_ecc_check(struct omap_nand_info *info,
-				 struct omap_nand_platform_data	*pdata)
+static bool omap2_nand_ecc_check(struct omap_nand_info *info)
 {
 	bool ecc_needs_bch, ecc_needs_omap_bch, ecc_needs_elm;
 
@@ -1804,7 +1912,6 @@ static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = {
 static int omap_nand_probe(struct platform_device *pdev)
 {
 	struct omap_nand_info		*info;
-	struct omap_nand_platform_data	*pdata = NULL;
 	struct mtd_info			*mtd;
 	struct nand_chip		*nand_chip;
 	int				err;
@@ -1821,29 +1928,10 @@ static int omap_nand_probe(struct platform_device *pdev)
 
 	info->pdev = pdev;
 
-	if (dev->of_node) {
-		if (omap_get_dt_info(dev, info))
-			return -EINVAL;
-	} else {
-		pdata = dev_get_platdata(&pdev->dev);
-		if (!pdata) {
-			dev_err(&pdev->dev, "platform data missing\n");
-			return -EINVAL;
-		}
-
-		info->gpmc_cs = pdata->cs;
-		info->reg = pdata->reg;
-		info->ecc_opt = pdata->ecc_opt;
-		if (pdata->dev_ready)
-			dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n");
-
-		info->xfer_type = pdata->xfer_type;
-		info->devsize = pdata->devsize;
-		info->elm_of_node = pdata->elm_of_node;
-		info->flash_bbt = pdata->flash_bbt;
-	}
+	err = omap_get_dt_info(dev, info);
+	if (err)
+		return err;
 
-	platform_set_drvdata(pdev, info);
 	info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
 	if (!info->ops) {
 		dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
@@ -2002,7 +2090,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		goto return_error;
 	}
 
-	if (!omap2_nand_ecc_check(info, pdata)) {
+	if (!omap2_nand_ecc_check(info)) {
 		err = -EINVAL;
 		goto return_error;
 	}
@@ -2044,7 +2132,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 4;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
 		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
@@ -2066,9 +2154,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 4;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;
 
@@ -2087,7 +2175,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 8;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
 		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
@@ -2109,9 +2197,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 8;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;
 
@@ -2131,9 +2219,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 16;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;
 
@@ -2167,10 +2255,9 @@ scan_tail:
 	if (err)
 		goto return_error;
 
-	if (dev->of_node)
-		mtd_device_register(mtd, NULL, 0);
-	else
-		mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+	err = mtd_device_register(mtd, NULL, 0);
+	if (err)
+		goto return_error;
 
 	platform_set_drvdata(pdev, mtd);
 
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 85cff68643e0..90b9a9ccbe60 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -30,6 +30,8 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define	CHIP_DELAY_TIMEOUT	msecs_to_jiffies(200)
 #define NAND_STOP_DELAY		msecs_to_jiffies(40)
@@ -45,6 +47,10 @@
  */
 #define INIT_BUFFER_SIZE	2048
 
+/* System control register and bit to enable NAND on some SoCs */
+#define GENCONF_SOC_DEVICE_MUX	0x208
+#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0)
+
 /* registers and bit definitions */
 #define NDCR		(0x00) /* Control register */
 #define NDTR0CS0	(0x04) /* Timing Parameter 0 for CS0 */
@@ -174,6 +180,7 @@ enum {
 enum pxa3xx_nand_variant {
 	PXA3XX_NAND_VARIANT_PXA,
 	PXA3XX_NAND_VARIANT_ARMADA370,
+	PXA3XX_NAND_VARIANT_ARMADA_8K,
 };
 
 struct pxa3xx_nand_host {
@@ -425,6 +432,10 @@ static const struct of_device_id pxa3xx_nand_dt_ids[] = {
 		.compatible = "marvell,armada370-nand",
 		.data       = (void *)PXA3XX_NAND_VARIANT_ARMADA370,
 	},
+	{
+		.compatible = "marvell,armada-8k-nand",
+		.data       = (void *)PXA3XX_NAND_VARIANT_ARMADA_8K,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
@@ -825,7 +836,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 		info->retcode = ERR_UNCORERR;
 	if (status & NDSR_CORERR) {
 		info->retcode = ERR_CORERR;
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+		if ((info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+		     info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) &&
 		    info->ecc_bch)
 			info->ecc_err_cnt = NDSR_ERR_CNT(status);
 		else
@@ -888,7 +900,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 		nand_writel(info, NDCB0, info->ndcb2);
 
 		/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+		    info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
 			nand_writel(info, NDCB0, info->ndcb3);
 	}
 
@@ -1671,7 +1684,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 		chip->options |= NAND_BUSWIDTH_16;
 
 	/* Device detection must be done with ECC disabled */
-	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+	    info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
 		nand_writel(info, NDECCCTRL, 0x0);
 
 	if (pdata->flash_bbt)
@@ -1709,7 +1723,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	 * (aka splitted) command handling,
 	 */
 	if (mtd->writesize > PAGE_CHUNK_SIZE) {
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+		    info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) {
 			chip->cmdfunc = nand_cmdfunc_extended;
 		} else {
 			dev_err(&info->pdev->dev,
@@ -1928,6 +1943,24 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
 	if (!of_id)
 		return 0;
 
+	/*
+	 * Some SoCs like A7k/A8k need to enable manually the NAND
+	 * controller to avoid being bootloader dependent. This is done
+	 * through the use of a single bit in the System Functions registers.
+	 */
+	if (pxa3xx_nand_get_variant(pdev) == PXA3XX_NAND_VARIANT_ARMADA_8K) {
+		struct regmap *sysctrl_base = syscon_regmap_lookup_by_phandle(
+			pdev->dev.of_node, "marvell,system-controller");
+		u32 reg;
+
+		if (IS_ERR(sysctrl_base))
+			return PTR_ERR(sysctrl_base);
+
+		regmap_read(sysctrl_base, GENCONF_SOC_DEVICE_MUX, &reg);
+		reg |= GENCONF_SOC_DEVICE_MUX_NFC_EN;
+		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
+	}
+
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index 3baddfc997d1..2656c1ac5646 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -22,6 +22,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/delay.h>
+#include <linux/dma/qcom_bam_dma.h>
 
 /* NANDc reg offsets */
 #define	NAND_FLASH_CMD			0x00
@@ -199,6 +200,15 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg,			\
  */
 #define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg))
 
+/* Returns the NAND register physical address */
+#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset))
+
+/* Returns the dma address for reg read buffer */
+#define reg_buf_dma_addr(chip, vaddr) \
+	((chip)->reg_read_dma + \
+	((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf))
+
+#define QPIC_PER_CW_CMD_ELEMENTS	32
 #define QPIC_PER_CW_CMD_SGL		32
 #define QPIC_PER_CW_DATA_SGL		8
 
@@ -221,8 +231,13 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg,			\
 /*
  * This data type corresponds to the BAM transaction which will be used for all
  * NAND transfers.
+ * @bam_ce - the array of BAM command elements
  * @cmd_sgl - sgl for NAND BAM command pipe
  * @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @bam_ce_pos - the index in bam_ce which is available for next sgl
+ * @bam_ce_start - the index in bam_ce which marks the start position ce
+ *		   for current sgl. It will be used for size calculation
+ *		   for current sgl
  * @cmd_sgl_pos - current index in command sgl.
  * @cmd_sgl_start - start index in command sgl.
  * @tx_sgl_pos - current index in data sgl for tx.
@@ -231,8 +246,11 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg,			\
  * @rx_sgl_start - start index in data sgl for rx.
  */
 struct bam_transaction {
+	struct bam_cmd_element *bam_ce;
 	struct scatterlist *cmd_sgl;
 	struct scatterlist *data_sgl;
+	u32 bam_ce_pos;
+	u32 bam_ce_start;
 	u32 cmd_sgl_pos;
 	u32 cmd_sgl_start;
 	u32 tx_sgl_pos;
@@ -307,7 +325,8 @@ struct nandc_regs {
  *				controller
  * @dev:			parent device
  * @base:			MMIO base
- * @base_dma:			physical base address of controller registers
+ * @base_phys:			physical base address of controller registers
+ * @base_dma:			dma base address of controller registers
  * @core_clk:			controller clock
  * @aon_clk:			another controller clock
  *
@@ -340,6 +359,7 @@ struct qcom_nand_controller {
 	struct device *dev;
 
 	void __iomem *base;
+	phys_addr_t base_phys;
 	dma_addr_t base_dma;
 
 	struct clk *core_clk;
@@ -462,7 +482,8 @@ alloc_bam_transaction(struct qcom_nand_controller *nandc)
 
 	bam_txn_size =
 		sizeof(*bam_txn) + num_cw *
-		((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
+		((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
+		(sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
 		(sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
 
 	bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
@@ -472,6 +493,10 @@ alloc_bam_transaction(struct qcom_nand_controller *nandc)
 	bam_txn = bam_txn_buf;
 	bam_txn_buf += sizeof(*bam_txn);
 
+	bam_txn->bam_ce = bam_txn_buf;
+	bam_txn_buf +=
+		sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
+
 	bam_txn->cmd_sgl = bam_txn_buf;
 	bam_txn_buf +=
 		sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
@@ -489,6 +514,8 @@ static void clear_bam_transaction(struct qcom_nand_controller *nandc)
 	if (!nandc->props->is_bam)
 		return;
 
+	bam_txn->bam_ce_pos = 0;
+	bam_txn->bam_ce_start = 0;
 	bam_txn->cmd_sgl_pos = 0;
 	bam_txn->cmd_sgl_start = 0;
 	bam_txn->tx_sgl_pos = 0;
@@ -734,6 +761,66 @@ static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
 }
 
 /*
+ * Prepares the command descriptor for BAM DMA which will be used for NAND
+ * register reads and writes. The command descriptor requires the command
+ * to be formed in command element type so this function uses the command
+ * element from bam transaction ce array and fills the same with required
+ * data. A single SGL can contain multiple command elements so
+ * NAND_BAM_NEXT_SGL will be used for starting the separate SGL
+ * after the current command element.
+ */
+static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
+				 int reg_off, const void *vaddr,
+				 int size, unsigned int flags)
+{
+	int bam_ce_size;
+	int i, ret;
+	struct bam_cmd_element *bam_ce_buffer;
+	struct bam_transaction *bam_txn = nandc->bam_txn;
+
+	bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos];
+
+	/* fill the command desc */
+	for (i = 0; i < size; i++) {
+		if (read)
+			bam_prep_ce(&bam_ce_buffer[i],
+				    nandc_reg_phys(nandc, reg_off + 4 * i),
+				    BAM_READ_COMMAND,
+				    reg_buf_dma_addr(nandc,
+						     (__le32 *)vaddr + i));
+		else
+			bam_prep_ce_le32(&bam_ce_buffer[i],
+					 nandc_reg_phys(nandc, reg_off + 4 * i),
+					 BAM_WRITE_COMMAND,
+					 *((__le32 *)vaddr + i));
+	}
+
+	bam_txn->bam_ce_pos += size;
+
+	/* use the separate sgl after this command */
+	if (flags & NAND_BAM_NEXT_SGL) {
+		bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start];
+		bam_ce_size = (bam_txn->bam_ce_pos -
+				bam_txn->bam_ce_start) *
+				sizeof(struct bam_cmd_element);
+		sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos],
+			   bam_ce_buffer, bam_ce_size);
+		bam_txn->cmd_sgl_pos++;
+		bam_txn->bam_ce_start = bam_txn->bam_ce_pos;
+
+		if (flags & NAND_BAM_NWD) {
+			ret = prepare_bam_async_desc(nandc, nandc->cmd_chan,
+						     DMA_PREP_FENCE |
+						     DMA_PREP_CMD);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+/*
  * Prepares the data descriptor for BAM DMA which will be used for NAND
  * data reads and writes.
  */
@@ -851,19 +938,22 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
 {
 	bool flow_control = false;
 	void *vaddr;
-	int size;
 
-	if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
-		flow_control = true;
+	vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
+	nandc->reg_read_pos += num_regs;
 
 	if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1)
 		first = dev_cmd_reg_addr(nandc, first);
 
-	size = num_regs * sizeof(u32);
-	vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
-	nandc->reg_read_pos += num_regs;
+	if (nandc->props->is_bam)
+		return prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
+					     num_regs, flags);
+
+	if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
+		flow_control = true;
 
-	return prep_adm_dma_desc(nandc, true, first, vaddr, size, flow_control);
+	return prep_adm_dma_desc(nandc, true, first, vaddr,
+				 num_regs * sizeof(u32), flow_control);
 }
 
 /*
@@ -880,13 +970,9 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
 	bool flow_control = false;
 	struct nandc_regs *regs = nandc->regs;
 	void *vaddr;
-	int size;
 
 	vaddr = offset_to_nandc_reg(regs, first);
 
-	if (first == NAND_FLASH_CMD)
-		flow_control = true;
-
 	if (first == NAND_ERASED_CW_DETECT_CFG) {
 		if (flags & NAND_ERASED_CW_SET)
 			vaddr = &regs->erased_cw_detect_cfg_set;
@@ -903,10 +989,15 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
 	if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD)
 		first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD);
 
-	size = num_regs * sizeof(u32);
+	if (nandc->props->is_bam)
+		return prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
+					     num_regs, flags);
+
+	if (first == NAND_FLASH_CMD)
+		flow_control = true;
 
-	return prep_adm_dma_desc(nandc, false, first, vaddr, size,
-				 flow_control);
+	return prep_adm_dma_desc(nandc, false, first, vaddr,
+				 num_regs * sizeof(u32), flow_control);
 }
 
 /*
@@ -1170,7 +1261,8 @@ static int submit_descs(struct qcom_nand_controller *nandc)
 		}
 
 		if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) {
-			r = prepare_bam_async_desc(nandc, nandc->cmd_chan, 0);
+			r = prepare_bam_async_desc(nandc, nandc->cmd_chan,
+						   DMA_PREP_CMD);
 			if (r)
 				return r;
 		}
@@ -2705,6 +2797,7 @@ static int qcom_nandc_probe(struct platform_device *pdev)
 	if (IS_ERR(nandc->base))
 		return PTR_ERR(nandc->base);
 
+	nandc->base_phys = res->start;
 	nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start);
 
 	nandc->core_clk = devm_clk_get(dev, "core");
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index e7f3c98487e6..3c5008a4f5f3 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -1094,14 +1094,11 @@ MODULE_DEVICE_TABLE(of, of_flctl_match);
 
 static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
 {
-	const struct of_device_id *match;
-	struct flctl_soc_config *config;
+	const struct flctl_soc_config *config;
 	struct sh_flctl_platform_data *pdata;
 
-	match = of_match_device(of_flctl_match, dev);
-	if (match)
-		config = (struct flctl_soc_config *)match->data;
-	else {
+	config = of_device_get_match_data(dev);
+	if (!config) {
 		dev_err(dev, "%s: no OF configuration attached\n", __func__);
 		return NULL;
 	}
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index d206b3c533bc..ee5ab994132f 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -6,3 +6,11 @@ config MTD_PARSER_TRX
 	  may contain up to 3/4 partitions (depending on the version).
 	  This driver will parse TRX header and report at least two partitions:
 	  kernel and rootfs.
+
+config MTD_SHARPSL_PARTS
+	tristate "Sharp SL Series NAND flash partition parser"
+	depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST
+	help
+	  This provides the read-only FTL logic necessary to read the partition
+	  table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
+	  partition parser using this code.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index 4d9024e0be3b..5b1bcc3d90d9 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
+obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
diff --git a/drivers/mtd/parsers/sharpslpart.c b/drivers/mtd/parsers/sharpslpart.c
new file mode 100644
index 000000000000..5fe0079ea5ed
--- /dev/null
+++ b/drivers/mtd/parsers/sharpslpart.c
@@ -0,0 +1,398 @@
+/*
+ * sharpslpart.c - MTD partition parser for NAND flash using the SHARP FTL
+ * for logical addressing, as used on the PXA models of the SHARP SL Series.
+ *
+ * Copyright (C) 2017 Andrea Adami <andrea.adami@gmail.com>
+ *
+ * Based on SHARP GPL 2.4 sources:
+ *   http://support.ezaurus.com/developer/source/source_dl.asp
+ *     drivers/mtd/nand/sharp_sl_logical.c
+ *     linux/include/asm-arm/sharp_nand_logical.h
+ *
+ * Copyright (C) 2002 SHARP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+/* oob structure */
+#define NAND_NOOB_LOGADDR_00		8
+#define NAND_NOOB_LOGADDR_01		9
+#define NAND_NOOB_LOGADDR_10		10
+#define NAND_NOOB_LOGADDR_11		11
+#define NAND_NOOB_LOGADDR_20		12
+#define NAND_NOOB_LOGADDR_21		13
+
+#define BLOCK_IS_RESERVED		0xffff
+#define BLOCK_UNMASK_COMPLEMENT		1
+
+/* factory defaults */
+#define SHARPSL_NAND_PARTS		3
+#define SHARPSL_FTL_PART_SIZE		(7 * SZ_1M)
+#define SHARPSL_PARTINFO1_LADDR		0x00060000
+#define SHARPSL_PARTINFO2_LADDR		0x00064000
+
+#define BOOT_MAGIC			0x424f4f54
+#define FSRO_MAGIC			0x4653524f
+#define FSRW_MAGIC			0x46535257
+
+/**
+ * struct sharpsl_ftl - Sharp FTL Logical Table
+ * @logmax:		number of logical blocks
+ * @log2phy:		the logical-to-physical table
+ *
+ * Structure containing the logical-to-physical translation table
+ * used by the SHARP SL FTL.
+ */
+struct sharpsl_ftl {
+	unsigned int logmax;
+	unsigned int *log2phy;
+};
+
+/* verify that the OOB bytes 8 to 15 are free and available for the FTL */
+static int sharpsl_nand_check_ooblayout(struct mtd_info *mtd)
+{
+	u8 freebytes = 0;
+	int section = 0;
+
+	while (true) {
+		struct mtd_oob_region oobfree = { };
+		int ret, i;
+
+		ret = mtd_ooblayout_free(mtd, section++, &oobfree);
+		if (ret)
+			break;
+
+		if (!oobfree.length || oobfree.offset > 15 ||
+		    (oobfree.offset + oobfree.length) < 8)
+			continue;
+
+		i = oobfree.offset >= 8 ? oobfree.offset : 8;
+		for (; i < oobfree.offset + oobfree.length && i < 16; i++)
+			freebytes |= BIT(i - 8);
+
+		if (freebytes == 0xff)
+			return 0;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int sharpsl_nand_read_oob(struct mtd_info *mtd, loff_t offs, u8 *buf)
+{
+	struct mtd_oob_ops ops = { };
+	int ret;
+
+	ops.mode = MTD_OPS_PLACE_OOB;
+	ops.ooblen = mtd->oobsize;
+	ops.oobbuf = buf;
+
+	ret = mtd_read_oob(mtd, offs, &ops);
+	if (ret != 0 || mtd->oobsize != ops.oobretlen)
+		return -1;
+
+	return 0;
+}
+
+/*
+ * The logical block number assigned to a physical block is stored in the OOB
+ * of the first page, in 3 16-bit copies with the following layout:
+ *
+ * 01234567 89abcdef
+ * -------- --------
+ * ECC BB   xyxyxy
+ *
+ * When reading we check that the first two copies agree.
+ * In case of error, matching is tried using the following pairs.
+ * Reserved values 0xffff mean the block is kept for wear leveling.
+ *
+ * 01234567 89abcdef
+ * -------- --------
+ * ECC BB   xyxy    oob[8]==oob[10] && oob[9]==oob[11]   -> byte0=8   byte1=9
+ * ECC BB     xyxy  oob[10]==oob[12] && oob[11]==oob[13] -> byte0=10  byte1=11
+ * ECC BB   xy  xy  oob[12]==oob[8] && oob[13]==oob[9]   -> byte0=12  byte1=13
+ */
+static int sharpsl_nand_get_logical_num(u8 *oob)
+{
+	u16 us;
+	int good0, good1;
+
+	if (oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] &&
+	    oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]) {
+		good0 = NAND_NOOB_LOGADDR_00;
+		good1 = NAND_NOOB_LOGADDR_01;
+	} else if (oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] &&
+		   oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]) {
+		good0 = NAND_NOOB_LOGADDR_10;
+		good1 = NAND_NOOB_LOGADDR_11;
+	} else if (oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] &&
+		   oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]) {
+		good0 = NAND_NOOB_LOGADDR_20;
+		good1 = NAND_NOOB_LOGADDR_21;
+	} else {
+		return -EINVAL;
+	}
+
+	us = oob[good0] | oob[good1] << 8;
+
+	/* parity check */
+	if (hweight16(us) & BLOCK_UNMASK_COMPLEMENT)
+		return -EINVAL;
+
+	/* reserved */
+	if (us == BLOCK_IS_RESERVED)
+		return BLOCK_IS_RESERVED;
+
+	return (us >> 1) & GENMASK(9, 0);
+}
+
+static int sharpsl_nand_init_ftl(struct mtd_info *mtd, struct sharpsl_ftl *ftl)
+{
+	unsigned int block_num, log_num, phymax;
+	loff_t block_adr;
+	u8 *oob;
+	int i, ret;
+
+	oob = kzalloc(mtd->oobsize, GFP_KERNEL);
+	if (!oob)
+		return -ENOMEM;
+
+	phymax = mtd_div_by_eb(SHARPSL_FTL_PART_SIZE, mtd);
+
+	/* FTL reserves 5% of the blocks + 1 spare  */
+	ftl->logmax = ((phymax * 95) / 100) - 1;
+
+	ftl->log2phy = kmalloc_array(ftl->logmax, sizeof(*ftl->log2phy),
+				     GFP_KERNEL);
+	if (!ftl->log2phy) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	/* initialize ftl->log2phy */
+	for (i = 0; i < ftl->logmax; i++)
+		ftl->log2phy[i] = UINT_MAX;
+
+	/* create physical-logical table */
+	for (block_num = 0; block_num < phymax; block_num++) {
+		block_adr = block_num * mtd->erasesize;
+
+		if (mtd_block_isbad(mtd, block_adr))
+			continue;
+
+		if (sharpsl_nand_read_oob(mtd, block_adr, oob))
+			continue;
+
+		/* get logical block */
+		log_num = sharpsl_nand_get_logical_num(oob);
+
+		/* cut-off errors and skip the out-of-range values */
+		if (log_num > 0 && log_num < ftl->logmax) {
+			if (ftl->log2phy[log_num] == UINT_MAX)
+				ftl->log2phy[log_num] = block_num;
+		}
+	}
+
+	pr_info("Sharp SL FTL: %d blocks used (%d logical, %d reserved)\n",
+		phymax, ftl->logmax, phymax - ftl->logmax);
+
+	ret = 0;
+exit:
+	kfree(oob);
+	return ret;
+}
+
+void sharpsl_nand_cleanup_ftl(struct sharpsl_ftl *ftl)
+{
+	kfree(ftl->log2phy);
+}
+
+static int sharpsl_nand_read_laddr(struct mtd_info *mtd,
+				   loff_t from,
+				   size_t len,
+				   void *buf,
+				   struct sharpsl_ftl *ftl)
+{
+	unsigned int log_num, final_log_num;
+	unsigned int block_num;
+	loff_t block_adr;
+	loff_t block_ofs;
+	size_t retlen;
+	int err;
+
+	log_num = mtd_div_by_eb((u32)from, mtd);
+	final_log_num = mtd_div_by_eb(((u32)from + len - 1), mtd);
+
+	if (len <= 0 || log_num >= ftl->logmax || final_log_num > log_num)
+		return -EINVAL;
+
+	block_num = ftl->log2phy[log_num];
+	block_adr = block_num * mtd->erasesize;
+	block_ofs = mtd_mod_by_eb((u32)from, mtd);
+
+	err = mtd_read(mtd, block_adr + block_ofs, len, &retlen, buf);
+	/* Ignore corrected ECC errors */
+	if (mtd_is_bitflip(err))
+		err = 0;
+
+	if (!err && retlen != len)
+		err = -EIO;
+
+	if (err)
+		pr_err("sharpslpart: error, read failed at %#llx\n",
+		       block_adr + block_ofs);
+
+	return err;
+}
+
+/*
+ * MTD Partition Parser
+ *
+ * Sample values read from SL-C860
+ *
+ * # cat /proc/mtd
+ * dev:    size   erasesize  name
+ * mtd0: 006d0000 00020000 "Filesystem"
+ * mtd1: 00700000 00004000 "smf"
+ * mtd2: 03500000 00004000 "root"
+ * mtd3: 04400000 00004000 "home"
+ *
+ * PARTITIONINFO1
+ * 0x00060000: 00 00 00 00 00 00 70 00 42 4f 4f 54 00 00 00 00  ......p.BOOT....
+ * 0x00060010: 00 00 70 00 00 00 c0 03 46 53 52 4f 00 00 00 00  ..p.....FSRO....
+ * 0x00060020: 00 00 c0 03 00 00 00 04 46 53 52 57 00 00 00 00  ........FSRW....
+ */
+struct sharpsl_nand_partinfo {
+	__le32 start;
+	__le32 end;
+	__be32 magic;
+	u32 reserved;
+};
+
+static int sharpsl_nand_read_partinfo(struct mtd_info *master,
+				      loff_t from,
+				      size_t len,
+				      struct sharpsl_nand_partinfo *buf,
+				      struct sharpsl_ftl *ftl)
+{
+	int ret;
+
+	ret = sharpsl_nand_read_laddr(master, from, len, buf, ftl);
+	if (ret)
+		return ret;
+
+	/* check for magics */
+	if (be32_to_cpu(buf[0].magic) != BOOT_MAGIC ||
+	    be32_to_cpu(buf[1].magic) != FSRO_MAGIC ||
+	    be32_to_cpu(buf[2].magic) != FSRW_MAGIC) {
+		pr_err("sharpslpart: magic values mismatch\n");
+		return -EINVAL;
+	}
+
+	/* fixup for hardcoded value 64 MiB (for older models) */
+	buf[2].end = cpu_to_le32(master->size);
+
+	/* extra sanity check */
+	if (le32_to_cpu(buf[0].end) <= le32_to_cpu(buf[0].start) ||
+	    le32_to_cpu(buf[1].start) < le32_to_cpu(buf[0].end) ||
+	    le32_to_cpu(buf[1].end) <= le32_to_cpu(buf[1].start) ||
+	    le32_to_cpu(buf[2].start) < le32_to_cpu(buf[1].end) ||
+	    le32_to_cpu(buf[2].end) <= le32_to_cpu(buf[2].start)) {
+		pr_err("sharpslpart: partition sizes mismatch\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sharpsl_parse_mtd_partitions(struct mtd_info *master,
+					const struct mtd_partition **pparts,
+					struct mtd_part_parser_data *data)
+{
+	struct sharpsl_ftl ftl;
+	struct sharpsl_nand_partinfo buf[SHARPSL_NAND_PARTS];
+	struct mtd_partition *sharpsl_nand_parts;
+	int err;
+
+	/* check that OOB bytes 8 to 15 used by the FTL are actually free */
+	err = sharpsl_nand_check_ooblayout(master);
+	if (err)
+		return err;
+
+	/* init logical mgmt (FTL) */
+	err = sharpsl_nand_init_ftl(master, &ftl);
+	if (err)
+		return err;
+
+	/* read and validate first partition table */
+	pr_info("sharpslpart: try reading first partition table\n");
+	err = sharpsl_nand_read_partinfo(master,
+					 SHARPSL_PARTINFO1_LADDR,
+					 sizeof(buf), buf, &ftl);
+	if (err) {
+		/* fallback: read second partition table */
+		pr_warn("sharpslpart: first partition table is invalid, retry using the second\n");
+		err = sharpsl_nand_read_partinfo(master,
+						 SHARPSL_PARTINFO2_LADDR,
+						 sizeof(buf), buf, &ftl);
+	}
+
+	/* cleanup logical mgmt (FTL) */
+	sharpsl_nand_cleanup_ftl(&ftl);
+
+	if (err) {
+		pr_err("sharpslpart: both partition tables are invalid\n");
+		return err;
+	}
+
+	sharpsl_nand_parts = kzalloc(sizeof(*sharpsl_nand_parts) *
+				     SHARPSL_NAND_PARTS, GFP_KERNEL);
+	if (!sharpsl_nand_parts)
+		return -ENOMEM;
+
+	/* original names */
+	sharpsl_nand_parts[0].name = "smf";
+	sharpsl_nand_parts[0].offset = le32_to_cpu(buf[0].start);
+	sharpsl_nand_parts[0].size = le32_to_cpu(buf[0].end) -
+				     le32_to_cpu(buf[0].start);
+
+	sharpsl_nand_parts[1].name = "root";
+	sharpsl_nand_parts[1].offset = le32_to_cpu(buf[1].start);
+	sharpsl_nand_parts[1].size = le32_to_cpu(buf[1].end) -
+				     le32_to_cpu(buf[1].start);
+
+	sharpsl_nand_parts[2].name = "home";
+	sharpsl_nand_parts[2].offset = le32_to_cpu(buf[2].start);
+	sharpsl_nand_parts[2].size = le32_to_cpu(buf[2].end) -
+				     le32_to_cpu(buf[2].start);
+
+	*pparts = sharpsl_nand_parts;
+	return SHARPSL_NAND_PARTS;
+}
+
+static struct mtd_part_parser sharpsl_mtd_parser = {
+	.parse_fn = sharpsl_parse_mtd_partitions,
+	.name = "sharpslpart",
+};
+module_mtd_part_parser(sharpsl_mtd_parser);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrea Adami <andrea.adami@gmail.com>");
+MODULE_DESCRIPTION("MTD partitioning for NAND flash on Sharp SL Series");
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 69c638dd0484..89da88e59121 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -50,7 +50,7 @@ config SPI_ATMEL_QUADSPI
 
 config SPI_CADENCE_QUADSPI
 	tristate "Cadence Quad SPI controller"
-	depends on OF && (ARM || COMPILE_TEST)
+	depends on OF && (ARM || ARM64 || COMPILE_TEST)
 	help
 	  Enable support for the Cadence Quad SPI Flash controller.
 
@@ -90,7 +90,7 @@ config SPI_INTEL_SPI
 	tristate
 
 config SPI_INTEL_SPI_PCI
-	tristate "Intel PCH/PCU SPI flash PCI driver" if EXPERT
+	tristate "Intel PCH/PCU SPI flash PCI driver"
 	depends on X86 && PCI
 	select SPI_INTEL_SPI
 	help
@@ -106,7 +106,7 @@ config SPI_INTEL_SPI_PCI
 	  will be called intel-spi-pci.
 
 config SPI_INTEL_SPI_PLATFORM
-	tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT
+	tristate "Intel PCH/PCU SPI flash platform driver"
 	depends on X86
 	select SPI_INTEL_SPI
 	help
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 53c7d8e0327a..75a2bc447a99 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -31,6 +31,7 @@
 #include <linux/of_device.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/sched.h>
 #include <linux/spi/spi.h>
 #include <linux/timer.h>
@@ -38,6 +39,9 @@
 #define CQSPI_NAME			"cadence-qspi"
 #define CQSPI_MAX_CHIPSELECT		16
 
+/* Quirks */
+#define CQSPI_NEEDS_WR_DELAY		BIT(0)
+
 struct cqspi_st;
 
 struct cqspi_flash_pdata {
@@ -75,7 +79,9 @@ struct cqspi_st {
 	bool			is_decoded_cs;
 	u32			fifo_depth;
 	u32			fifo_width;
+	bool			rclk_en;
 	u32			trigger_address;
+	u32			wr_delay;
 	struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
 };
 
@@ -608,6 +614,15 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor,
 	reinit_completion(&cqspi->transfer_complete);
 	writel(CQSPI_REG_INDIRECTWR_START_MASK,
 	       reg_base + CQSPI_REG_INDIRECTWR);
+	/*
+	 * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access
+	 * Controller programming sequence, couple of cycles of
+	 * QSPI_REF_CLK delay is required for the above bit to
+	 * be internally synchronized by the QSPI module. Provide 5
+	 * cycles of delay.
+	 */
+	if (cqspi->wr_delay)
+		ndelay(cqspi->wr_delay);
 
 	while (remaining > 0) {
 		write_bytes = remaining > page_size ? page_size : remaining;
@@ -775,7 +790,7 @@ static void cqspi_config_baudrate_div(struct cqspi_st *cqspi)
 }
 
 static void cqspi_readdata_capture(struct cqspi_st *cqspi,
-				   const unsigned int bypass,
+				   const bool bypass,
 				   const unsigned int delay)
 {
 	void __iomem *reg_base = cqspi->iobase;
@@ -839,7 +854,8 @@ static void cqspi_configure(struct spi_nor *nor)
 		cqspi->sclk = sclk;
 		cqspi_config_baudrate_div(cqspi);
 		cqspi_delay(nor);
-		cqspi_readdata_capture(cqspi, 1, f_pdata->read_delay);
+		cqspi_readdata_capture(cqspi, !cqspi->rclk_en,
+				       f_pdata->read_delay);
 	}
 
 	if (switch_cs || switch_ck)
@@ -1036,6 +1052,8 @@ static int cqspi_of_get_pdata(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
+	cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en");
+
 	return 0;
 }
 
@@ -1156,6 +1174,7 @@ static int cqspi_probe(struct platform_device *pdev)
 	struct cqspi_st *cqspi;
 	struct resource *res;
 	struct resource *res_ahb;
+	unsigned long data;
 	int ret;
 	int irq;
 
@@ -1206,13 +1225,24 @@ static int cqspi_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		return ret;
+	}
+
 	ret = clk_prepare_enable(cqspi->clk);
 	if (ret) {
 		dev_err(dev, "Cannot enable QSPI clock.\n");
-		return ret;
+		goto probe_clk_failed;
 	}
 
 	cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
+	data  = (unsigned long)of_device_get_match_data(dev);
+	if (data & CQSPI_NEEDS_WR_DELAY)
+		cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC,
+						   cqspi->master_ref_clk_hz);
 
 	ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0,
 			       pdev->name, cqspi);
@@ -1233,10 +1263,13 @@ static int cqspi_probe(struct platform_device *pdev)
 	}
 
 	return ret;
-probe_irq_failed:
-	cqspi_controller_enable(cqspi, 0);
 probe_setup_failed:
+	cqspi_controller_enable(cqspi, 0);
+probe_irq_failed:
 	clk_disable_unprepare(cqspi->clk);
+probe_clk_failed:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 	return ret;
 }
 
@@ -1253,6 +1286,9 @@ static int cqspi_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(cqspi->clk);
 
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
@@ -1284,7 +1320,14 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = {
 #endif
 
 static const struct of_device_id cqspi_dt_ids[] = {
-	{.compatible = "cdns,qspi-nor",},
+	{
+		.compatible = "cdns,qspi-nor",
+		.data = (void *)0,
+	},
+	{
+		.compatible = "ti,k2g-qspi",
+		.data = (void *)CQSPI_NEEDS_WR_DELAY,
+	},
 	{ /* end of table */ }
 };
 
diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c
index e82652335ede..c0976f2e3dd1 100644
--- a/drivers/mtd/spi-nor/intel-spi-pci.c
+++ b/drivers/mtd/spi-nor/intel-spi-pci.c
@@ -63,7 +63,10 @@ static void intel_spi_pci_remove(struct pci_dev *pdev)
 }
 
 static const struct pci_device_id intel_spi_pci_ids[] = {
+	{ PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index 8a596bfeddff..ef034d898a23 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -67,8 +67,6 @@
 #define PR_LIMIT_MASK			(0x3fff << PR_LIMIT_SHIFT)
 #define PR_RPE				BIT(15)
 #define PR_BASE_MASK			0x3fff
-/* Last PR is GPR0 */
-#define PR_NUM				(5 + 1)
 
 /* Offsets are from @ispi->sregs */
 #define SSFSTS_CTL			0x00
@@ -90,20 +88,35 @@
 #define OPMENU0				0x08
 #define OPMENU1				0x0c
 
+#define OPTYPE_READ_NO_ADDR		0
+#define OPTYPE_WRITE_NO_ADDR		1
+#define OPTYPE_READ_WITH_ADDR		2
+#define OPTYPE_WRITE_WITH_ADDR		3
+
 /* CPU specifics */
 #define BYT_PR				0x74
 #define BYT_SSFSTS_CTL			0x90
 #define BYT_BCR				0xfc
 #define BYT_BCR_WPD			BIT(0)
 #define BYT_FREG_NUM			5
+#define BYT_PR_NUM			5
 
 #define LPT_PR				0x74
 #define LPT_SSFSTS_CTL			0x90
 #define LPT_FREG_NUM			5
+#define LPT_PR_NUM			5
 
 #define BXT_PR				0x84
 #define BXT_SSFSTS_CTL			0xa0
 #define BXT_FREG_NUM			12
+#define BXT_PR_NUM			6
+
+#define LVSCC				0xc4
+#define UVSCC				0xc8
+#define ERASE_OPCODE_SHIFT		8
+#define ERASE_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
+#define ERASE_64K_OPCODE_SHIFT		16
+#define ERASE_64K_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
 
 #define INTEL_SPI_TIMEOUT		5000 /* ms */
 #define INTEL_SPI_FIFO_SZ		64
@@ -117,8 +130,11 @@
  * @pregs: Start of protection registers
  * @sregs: Start of software sequencer registers
  * @nregions: Maximum number of regions
+ * @pr_num: Maximum number of protected range registers
  * @writeable: Is the chip writeable
- * @swseq: Use SW sequencer in register reads/writes
+ * @locked: Is SPI setting locked
+ * @swseq_reg: Use SW sequencer in register reads/writes
+ * @swseq_erase: Use SW sequencer in erase operation
  * @erase_64k: 64k erase supported
  * @opcodes: Opcodes which are supported. This are programmed by BIOS
  *           before it locks down the controller.
@@ -132,8 +148,11 @@ struct intel_spi {
 	void __iomem *pregs;
 	void __iomem *sregs;
 	size_t nregions;
+	size_t pr_num;
 	bool writeable;
-	bool swseq;
+	bool locked;
+	bool swseq_reg;
+	bool swseq_erase;
 	bool erase_64k;
 	u8 opcodes[8];
 	u8 preopcodes[2];
@@ -167,7 +186,7 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
 	for (i = 0; i < ispi->nregions; i++)
 		dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
 			readl(ispi->base + FREG(i)));
-	for (i = 0; i < PR_NUM; i++)
+	for (i = 0; i < ispi->pr_num; i++)
 		dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
 			readl(ispi->pregs + PR(i)));
 
@@ -181,8 +200,11 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
 	if (ispi->info->type == INTEL_SPI_BYT)
 		dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));
 
+	dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC));
+	dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC));
+
 	dev_dbg(ispi->dev, "Protected regions:\n");
-	for (i = 0; i < PR_NUM; i++) {
+	for (i = 0; i < ispi->pr_num; i++) {
 		u32 base, limit;
 
 		value = readl(ispi->pregs + PR(i));
@@ -214,7 +236,9 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
 	}
 
 	dev_dbg(ispi->dev, "Using %cW sequencer for register access\n",
-		ispi->swseq ? 'S' : 'H');
+		ispi->swseq_reg ? 'S' : 'H');
+	dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n",
+		ispi->swseq_erase ? 'S' : 'H');
 }
 
 /* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */
@@ -278,7 +302,7 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
 
 static int intel_spi_init(struct intel_spi *ispi)
 {
-	u32 opmenu0, opmenu1, val;
+	u32 opmenu0, opmenu1, lvscc, uvscc, val;
 	int i;
 
 	switch (ispi->info->type) {
@@ -286,6 +310,8 @@ static int intel_spi_init(struct intel_spi *ispi)
 		ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
 		ispi->pregs = ispi->base + BYT_PR;
 		ispi->nregions = BYT_FREG_NUM;
+		ispi->pr_num = BYT_PR_NUM;
+		ispi->swseq_reg = true;
 
 		if (writeable) {
 			/* Disable write protection */
@@ -305,12 +331,15 @@ static int intel_spi_init(struct intel_spi *ispi)
 		ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
 		ispi->pregs = ispi->base + LPT_PR;
 		ispi->nregions = LPT_FREG_NUM;
+		ispi->pr_num = LPT_PR_NUM;
+		ispi->swseq_reg = true;
 		break;
 
 	case INTEL_SPI_BXT:
 		ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
 		ispi->pregs = ispi->base + BXT_PR;
 		ispi->nregions = BXT_FREG_NUM;
+		ispi->pr_num = BXT_PR_NUM;
 		ispi->erase_64k = true;
 		break;
 
@@ -318,42 +347,64 @@ static int intel_spi_init(struct intel_spi *ispi)
 		return -EINVAL;
 	}
 
-	/* Disable #SMI generation */
+	/* Disable #SMI generation from HW sequencer */
 	val = readl(ispi->base + HSFSTS_CTL);
 	val &= ~HSFSTS_CTL_FSMIE;
 	writel(val, ispi->base + HSFSTS_CTL);
 
 	/*
-	 * BIOS programs allowed opcodes and then locks down the register.
-	 * So read back what opcodes it decided to support. That's the set
-	 * we are going to support as well.
+	 * Determine whether erase operation should use HW or SW sequencer.
+	 *
+	 * The HW sequencer has a predefined list of opcodes, with only the
+	 * erase opcode being programmable in LVSCC and UVSCC registers.
+	 * If these registers don't contain a valid erase opcode, erase
+	 * cannot be done using HW sequencer.
 	 */
-	opmenu0 = readl(ispi->sregs + OPMENU0);
-	opmenu1 = readl(ispi->sregs + OPMENU1);
+	lvscc = readl(ispi->base + LVSCC);
+	uvscc = readl(ispi->base + UVSCC);
+	if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK))
+		ispi->swseq_erase = true;
+	/* SPI controller on Intel BXT supports 64K erase opcode */
+	if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase)
+		if (!(lvscc & ERASE_64K_OPCODE_MASK) ||
+		    !(uvscc & ERASE_64K_OPCODE_MASK))
+			ispi->erase_64k = false;
 
 	/*
 	 * Some controllers can only do basic operations using hardware
 	 * sequencer. All other operations are supposed to be carried out
-	 * using software sequencer. If we find that BIOS has programmed
-	 * opcodes for the software sequencer we use that over the hardware
-	 * sequencer.
+	 * using software sequencer.
 	 */
-	if (opmenu0 && opmenu1) {
-		for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
-			ispi->opcodes[i] = opmenu0 >> i * 8;
-			ispi->opcodes[i + 4] = opmenu1 >> i * 8;
-		}
-
-		val = readl(ispi->sregs + PREOP_OPTYPE);
-		ispi->preopcodes[0] = val;
-		ispi->preopcodes[1] = val >> 8;
-
+	if (ispi->swseq_reg) {
 		/* Disable #SMI generation from SW sequencer */
 		val = readl(ispi->sregs + SSFSTS_CTL);
 		val &= ~SSFSTS_CTL_FSMIE;
 		writel(val, ispi->sregs + SSFSTS_CTL);
+	}
+
+	/* Check controller's lock status */
+	val = readl(ispi->base + HSFSTS_CTL);
+	ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN);
+
+	if (ispi->locked) {
+		/*
+		 * BIOS programs allowed opcodes and then locks down the
+		 * register. So read back what opcodes it decided to support.
+		 * That's the set we are going to support as well.
+		 */
+		opmenu0 = readl(ispi->sregs + OPMENU0);
+		opmenu1 = readl(ispi->sregs + OPMENU1);
 
-		ispi->swseq = true;
+		if (opmenu0 && opmenu1) {
+			for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
+				ispi->opcodes[i] = opmenu0 >> i * 8;
+				ispi->opcodes[i + 4] = opmenu1 >> i * 8;
+			}
+
+			val = readl(ispi->sregs + PREOP_OPTYPE);
+			ispi->preopcodes[0] = val;
+			ispi->preopcodes[1] = val >> 8;
+		}
 	}
 
 	intel_spi_dump_regs(ispi);
@@ -361,18 +412,28 @@ static int intel_spi_init(struct intel_spi *ispi)
 	return 0;
 }
 
-static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode)
+static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype)
 {
 	int i;
+	int preop;
 
-	for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
-		if (ispi->opcodes[i] == opcode)
-			return i;
-	return -EINVAL;
+	if (ispi->locked) {
+		for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
+			if (ispi->opcodes[i] == opcode)
+				return i;
+
+		return -EINVAL;
+	}
+
+	/* The lock is off, so just use index 0 */
+	writel(opcode, ispi->sregs + OPMENU0);
+	preop = readw(ispi->sregs + PREOP_OPTYPE);
+	writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE);
+
+	return 0;
 }
 
-static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
-			      int len)
+static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, int len)
 {
 	u32 val, status;
 	int ret;
@@ -394,6 +455,9 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
 		return -EINVAL;
 	}
 
+	if (len > INTEL_SPI_FIFO_SZ)
+		return -EINVAL;
+
 	val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT;
 	val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
 	val |= HSFSTS_CTL_FGO;
@@ -412,27 +476,39 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
 	return 0;
 }
 
-static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
-			      int len)
+static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len,
+			      int optype)
 {
-	u32 val, status;
+	u32 val = 0, status;
+	u16 preop;
 	int ret;
 
-	ret = intel_spi_opcode_index(ispi, opcode);
+	ret = intel_spi_opcode_index(ispi, opcode, optype);
 	if (ret < 0)
 		return ret;
 
-	val = (len << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
+	if (len > INTEL_SPI_FIFO_SZ)
+		return -EINVAL;
+
+	/* Only mark 'Data Cycle' bit when there is data to be transferred */
+	if (len > 0)
+		val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
 	val |= ret << SSFSTS_CTL_COP_SHIFT;
 	val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
 	val |= SSFSTS_CTL_SCGO;
+	preop = readw(ispi->sregs + PREOP_OPTYPE);
+	if (preop) {
+		val |= SSFSTS_CTL_ACS;
+		if (preop >> 8)
+			val |= SSFSTS_CTL_SPOP;
+	}
 	writel(val, ispi->sregs + SSFSTS_CTL);
 
 	ret = intel_spi_wait_sw_busy(ispi);
 	if (ret)
 		return ret;
 
-	status = readl(ispi->base + SSFSTS_CTL);
+	status = readl(ispi->sregs + SSFSTS_CTL);
 	if (status & SSFSTS_CTL_FCERR)
 		return -EIO;
 	else if (status & SSFSTS_CTL_AEL)
@@ -449,10 +525,11 @@ static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 	/* Address of the first chip */
 	writel(0, ispi->base + FADDR);
 
-	if (ispi->swseq)
-		ret = intel_spi_sw_cycle(ispi, opcode, buf, len);
+	if (ispi->swseq_reg)
+		ret = intel_spi_sw_cycle(ispi, opcode, len,
+					 OPTYPE_READ_NO_ADDR);
 	else
-		ret = intel_spi_hw_cycle(ispi, opcode, buf, len);
+		ret = intel_spi_hw_cycle(ispi, opcode, len);
 
 	if (ret)
 		return ret;
@@ -467,10 +544,15 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 
 	/*
 	 * This is handled with atomic operation and preop code in Intel
-	 * controller so skip it here now.
+	 * controller so skip it here now. If the controller is not locked,
+	 * program the opcode to the PREOP register for later use.
 	 */
-	if (opcode == SPINOR_OP_WREN)
+	if (opcode == SPINOR_OP_WREN) {
+		if (!ispi->locked)
+			writel(opcode, ispi->sregs + PREOP_OPTYPE);
+
 		return 0;
+	}
 
 	writel(0, ispi->base + FADDR);
 
@@ -479,9 +561,10 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 	if (ret)
 		return ret;
 
-	if (ispi->swseq)
-		return intel_spi_sw_cycle(ispi, opcode, buf, len);
-	return intel_spi_hw_cycle(ispi, opcode, buf, len);
+	if (ispi->swseq_reg)
+		return intel_spi_sw_cycle(ispi, opcode, len,
+					  OPTYPE_WRITE_NO_ADDR);
+	return intel_spi_hw_cycle(ispi, opcode, len);
 }
 
 static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
@@ -561,12 +644,6 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
 		val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
 		val |= HSFSTS_CTL_FCYCLE_WRITE;
 
-		/* Write enable */
-		if (ispi->preopcodes[1] == SPINOR_OP_WREN)
-			val |= SSFSTS_CTL_SPOP;
-		val |= SSFSTS_CTL_ACS;
-		writel(val, ispi->base + HSFSTS_CTL);
-
 		ret = intel_spi_write_block(ispi, write_buf, block_size);
 		if (ret) {
 			dev_err(ispi->dev, "failed to write block\n");
@@ -574,8 +651,8 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
 		}
 
 		/* Start the write now */
-		val = readl(ispi->base + HSFSTS_CTL);
-		writel(val | HSFSTS_CTL_FGO, ispi->base + HSFSTS_CTL);
+		val |= HSFSTS_CTL_FGO;
+		writel(val, ispi->base + HSFSTS_CTL);
 
 		ret = intel_spi_wait_hw_busy(ispi);
 		if (ret) {
@@ -620,6 +697,22 @@ static int intel_spi_erase(struct spi_nor *nor, loff_t offs)
 		erase_size = SZ_4K;
 	}
 
+	if (ispi->swseq_erase) {
+		while (len > 0) {
+			writel(offs, ispi->base + FADDR);
+
+			ret = intel_spi_sw_cycle(ispi, nor->erase_opcode,
+						 0, OPTYPE_WRITE_WITH_ADDR);
+			if (ret)
+				return ret;
+
+			offs += erase_size;
+			len -= erase_size;
+		}
+
+		return 0;
+	}
+
 	while (len > 0) {
 		writel(offs, ispi->base + FADDR);
 
@@ -652,7 +745,7 @@ static bool intel_spi_is_protected(const struct intel_spi *ispi,
 {
 	int i;
 
-	for (i = 0; i < PR_NUM; i++) {
+	for (i = 0; i < ispi->pr_num; i++) {
 		u32 pr_base, pr_limit, pr_value;
 
 		pr_value = readl(ispi->pregs + PR(i));
diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
index c258c7adf1c5..abe455ccd68b 100644
--- a/drivers/mtd/spi-nor/mtk-quadspi.c
+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
@@ -404,6 +404,29 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
 	return ret;
 }
 
+static void mt8173_nor_disable_clk(struct mt8173_nor *mt8173_nor)
+{
+	clk_disable_unprepare(mt8173_nor->spi_clk);
+	clk_disable_unprepare(mt8173_nor->nor_clk);
+}
+
+static int mt8173_nor_enable_clk(struct mt8173_nor *mt8173_nor)
+{
+	int ret;
+
+	ret = clk_prepare_enable(mt8173_nor->spi_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(mt8173_nor->nor_clk);
+	if (ret) {
+		clk_disable_unprepare(mt8173_nor->spi_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
 			struct device_node *flash_node)
 {
@@ -468,15 +491,11 @@ static int mtk_nor_drv_probe(struct platform_device *pdev)
 		return PTR_ERR(mt8173_nor->nor_clk);
 
 	mt8173_nor->dev = &pdev->dev;
-	ret = clk_prepare_enable(mt8173_nor->spi_clk);
+
+	ret = mt8173_nor_enable_clk(mt8173_nor);
 	if (ret)
 		return ret;
 
-	ret = clk_prepare_enable(mt8173_nor->nor_clk);
-	if (ret) {
-		clk_disable_unprepare(mt8173_nor->spi_clk);
-		return ret;
-	}
 	/* only support one attached flash */
 	flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
 	if (!flash_np) {
@@ -487,10 +506,9 @@ static int mtk_nor_drv_probe(struct platform_device *pdev)
 	ret = mtk_nor_init(mt8173_nor, flash_np);
 
 nor_free:
-	if (ret) {
-		clk_disable_unprepare(mt8173_nor->spi_clk);
-		clk_disable_unprepare(mt8173_nor->nor_clk);
-	}
+	if (ret)
+		mt8173_nor_disable_clk(mt8173_nor);
+
 	return ret;
 }
 
@@ -498,11 +516,38 @@ static int mtk_nor_drv_remove(struct platform_device *pdev)
 {
 	struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(mt8173_nor->spi_clk);
-	clk_disable_unprepare(mt8173_nor->nor_clk);
+	mt8173_nor_disable_clk(mt8173_nor);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_nor_suspend(struct device *dev)
+{
+	struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
+
+	mt8173_nor_disable_clk(mt8173_nor);
+
 	return 0;
 }
 
+static int mtk_nor_resume(struct device *dev)
+{
+	struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev);
+
+	return mt8173_nor_enable_clk(mt8173_nor);
+}
+
+static const struct dev_pm_ops mtk_nor_dev_pm_ops = {
+	.suspend = mtk_nor_suspend,
+	.resume = mtk_nor_resume,
+};
+
+#define MTK_NOR_DEV_PM_OPS	(&mtk_nor_dev_pm_ops)
+#else
+#define MTK_NOR_DEV_PM_OPS	NULL
+#endif
+
 static const struct of_device_id mtk_nor_of_ids[] = {
 	{ .compatible = "mediatek,mt8173-nor"},
 	{ /* sentinel */ }
@@ -514,6 +559,7 @@ static struct platform_driver mtk_nor_driver = {
 	.remove = mtk_nor_drv_remove,
 	.driver = {
 		.name = "mtk-nor",
+		.pm = MTK_NOR_DEV_PM_OPS,
 		.of_match_table = mtk_nor_of_ids,
 	},
 };
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 19c000722cbc..bc266f70a15b 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -89,6 +89,8 @@ struct flash_info {
 #define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
 #define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
 #define USE_CLSR		BIT(14)	/* use CLSR command */
+
+	int	(*quad_enable)(struct spi_nor *nor);
 };
 
 #define JEDEC_MFR(info)	((info)->id[0])
@@ -870,6 +872,8 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	return ret;
 }
 
+static int macronix_quad_enable(struct spi_nor *nor);
+
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
 		.id = {							\
@@ -964,6 +968,7 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
 
 	/* Everspin */
+	{ "mr25h128", CAT25_INFO( 16 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
 	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
 	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
 	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
@@ -983,6 +988,11 @@ static const struct flash_info spi_nor_ids[] = {
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
 	{
+		"gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+	},
+	{
 		"gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
@@ -997,6 +1007,12 @@ static const struct flash_info spi_nor_ids[] = {
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
+	{
+		"gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+			.quad_enable = macronix_quad_enable,
+	},
 
 	/* Intel/Numonyx -- xxxs33b */
 	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
@@ -1024,7 +1040,7 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
@@ -1137,6 +1153,11 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
 	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
+	{
+		"w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32,
+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+	},
 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4, SECT_4K) },
 	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4, SECT_4K) },
@@ -2288,8 +2309,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
 
 	/* Check the SFDP header version. */
 	if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
-	    header.major != SFDP_JESD216_MAJOR ||
-	    header.minor < SFDP_JESD216_MINOR)
+	    header.major != SFDP_JESD216_MAJOR)
 		return -EINVAL;
 
 	/*
@@ -2427,6 +2447,15 @@ static int spi_nor_init_params(struct spi_nor *nor,
 			params->quad_enable = spansion_quad_enable;
 			break;
 		}
+
+		/*
+		 * Some manufacturer like GigaDevice may use different
+		 * bit to set QE on different memories, so the MFR can't
+		 * indicate the quad_enable method for this case, we need
+		 * set it in flash info list.
+		 */
+		if (info->quad_enable)
+			params->quad_enable = info->quad_enable;
 	}
 
 	/* Override the parameters with data read from SFDP tables. */
@@ -2630,17 +2659,60 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
 	/* Enable Quad I/O if needed. */
 	enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
 			  spi_nor_get_protocol_width(nor->write_proto) == 4);
-	if (enable_quad_io && params->quad_enable) {
-		err = params->quad_enable(nor);
+	if (enable_quad_io && params->quad_enable)
+		nor->quad_enable = params->quad_enable;
+	else
+		nor->quad_enable = NULL;
+
+	return 0;
+}
+
+static int spi_nor_init(struct spi_nor *nor)
+{
+	int err;
+
+	/*
+	 * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
+	 * with the software protection bits set
+	 */
+	if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
+	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
+	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
+	    nor->info->flags & SPI_NOR_HAS_LOCK) {
+		write_enable(nor);
+		write_sr(nor, 0);
+		spi_nor_wait_till_ready(nor);
+	}
+
+	if (nor->quad_enable) {
+		err = nor->quad_enable(nor);
 		if (err) {
 			dev_err(nor->dev, "quad mode not supported\n");
 			return err;
 		}
 	}
 
+	if ((nor->addr_width == 4) &&
+	    (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) &&
+	    !(nor->info->flags & SPI_NOR_4B_OPCODES))
+		set_4byte(nor, nor->info, 1);
+
 	return 0;
 }
 
+/* mtd resume handler */
+static void spi_nor_resume(struct mtd_info *mtd)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	struct device *dev = nor->dev;
+	int ret;
+
+	/* re-initialize the nor chip */
+	ret = spi_nor_init(nor);
+	if (ret)
+		dev_err(dev, "resume() failed\n");
+}
+
 int spi_nor_scan(struct spi_nor *nor, const char *name,
 		 const struct spi_nor_hwcaps *hwcaps)
 {
@@ -2708,20 +2780,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (ret)
 		return ret;
 
-	/*
-	 * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
-	 * with the software protection bits set
-	 */
-
-	if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
-	    JEDEC_MFR(info) == SNOR_MFR_INTEL ||
-	    JEDEC_MFR(info) == SNOR_MFR_SST ||
-	    info->flags & SPI_NOR_HAS_LOCK) {
-		write_enable(nor);
-		write_sr(nor, 0);
-		spi_nor_wait_till_ready(nor);
-	}
-
 	if (!mtd->name)
 		mtd->name = dev_name(dev);
 	mtd->priv = nor;
@@ -2731,6 +2789,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	mtd->size = params.size;
 	mtd->_erase = spi_nor_erase;
 	mtd->_read = spi_nor_read;
+	mtd->_resume = spi_nor_resume;
 
 	/* NOR protection support for STmicro/Micron chips and similar */
 	if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
@@ -2804,8 +2863,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 		if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
 		    info->flags & SPI_NOR_4B_OPCODES)
 			spi_nor_set_4byte_opcodes(nor, info);
-		else
-			set_4byte(nor, info, 1);
 	} else {
 		nor->addr_width = 3;
 	}
@@ -2822,6 +2879,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 			return ret;
 	}
 
+	/* Send all the required SPI flash commands to initialize device */
+	nor->info = info;
+	ret = spi_nor_init(nor);
+	if (ret)
+		return ret;
+
 	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
 			(long long)mtd->size >> 10);
 
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c
index 86c0931543c5..b3c7f6addba7 100644
--- a/drivers/mtd/spi-nor/stm32-quadspi.c
+++ b/drivers/mtd/spi-nor/stm32-quadspi.c
@@ -1,9 +1,22 @@
 /*
- * stm32_quadspi.c
+ * Driver for stm32 quadspi controller
  *
- * Copyright (C) 2017, Ludovic Barre
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Ludovic Barre author <ludovic.barre@st.com>.
  *
- * License terms: GNU General Public License (GPL), version 2
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * This program. If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/clk.h>
 #include <linux/errno.h>
@@ -113,6 +126,7 @@
 #define STM32_MAX_MMAP_SZ	SZ_256M
 #define STM32_MAX_NORCHIP	2
 
+#define STM32_QSPI_FIFO_SZ	32
 #define STM32_QSPI_FIFO_TIMEOUT_US 30000
 #define STM32_QSPI_BUSY_TIMEOUT_US 100000
 
@@ -124,6 +138,7 @@ struct stm32_qspi_flash {
 	u32 presc;
 	u32 read_mode;
 	bool registered;
+	u32 prefetch_limit;
 };
 
 struct stm32_qspi {
@@ -240,12 +255,12 @@ static int stm32_qspi_tx_poll(struct stm32_qspi *qspi,
 						 STM32_QSPI_FIFO_TIMEOUT_US);
 		if (ret) {
 			dev_err(qspi->dev, "fifo timeout (stat:%#x)\n", sr);
-			break;
+			return ret;
 		}
 		tx_fifo(buf++, qspi->io_base + QUADSPI_DR);
 	}
 
-	return ret;
+	return 0;
 }
 
 static int stm32_qspi_tx_mm(struct stm32_qspi *qspi,
@@ -272,6 +287,7 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash,
 {
 	struct stm32_qspi *qspi = flash->qspi;
 	u32 ccr, dcr, cr;
+	u32 last_byte;
 	int err;
 
 	err = stm32_qspi_wait_nobusy(qspi);
@@ -314,6 +330,10 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash,
 		if (err)
 			goto abort;
 		writel_relaxed(FCR_CTCF, qspi->io_base + QUADSPI_FCR);
+	} else {
+		last_byte = cmd->addr + cmd->len;
+		if (last_byte > flash->prefetch_limit)
+			goto abort;
 	}
 
 	return err;
@@ -322,7 +342,9 @@ abort:
 	cr = readl_relaxed(qspi->io_base + QUADSPI_CR) | CR_ABORT;
 	writel_relaxed(cr, qspi->io_base + QUADSPI_CR);
 
-	dev_err(qspi->dev, "%s abort err:%d\n", __func__, err);
+	if (err)
+		dev_err(qspi->dev, "%s abort err:%d\n", __func__, err);
+
 	return err;
 }
 
@@ -550,6 +572,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi,
 	}
 
 	flash->fsize = FSIZE_VAL(mtd->size);
+	flash->prefetch_limit = mtd->size - STM32_QSPI_FIFO_SZ;
 
 	flash->read_mode = CCR_FMODE_MM;
 	if (mtd->size > qspi->mm_size)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 6cd0f6b7658b..cd55bf14ad51 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -267,7 +267,7 @@ struct mtd_info {
 	 */
 	unsigned int bitflip_threshold;
 
-	// Kernel-only stuff starts here.
+	/* Kernel-only stuff starts here. */
 	const char *name;
 	int index;
 
@@ -297,10 +297,6 @@ struct mtd_info {
 	int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
 		       size_t *retlen, void **virt, resource_size_t *phys);
 	int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
-	unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
-					     unsigned long len,
-					     unsigned long offset,
-					     unsigned long flags);
 	int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
 		      size_t *retlen, u_char *buf);
 	int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
diff --git a/include/linux/mtd/nand-gpio.h b/include/linux/mtd/nand-gpio.h
index fdef72d6e198..7ab51bc4a380 100644
--- a/include/linux/mtd/nand-gpio.h
+++ b/include/linux/mtd/nand-gpio.h
@@ -5,11 +5,6 @@
 #include <linux/mtd/rawnand.h>
 
 struct gpio_nand_platdata {
-	int	gpio_nce;
-	int	gpio_nwp;
-	int	gpio_cle;
-	int	gpio_ale;
-	int	gpio_rdy;
 	void	(*adjust_parts)(struct gpio_nand_platdata *, size_t);
 	struct mtd_partition *parts;
 	unsigned int num_parts;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 2b05f4273bab..749bb08c4772 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -177,6 +177,9 @@ enum nand_ecc_algo {
  */
 #define NAND_NEED_SCRAMBLING	0x00002000
 
+/* Device needs 3rd row address cycle */
+#define NAND_ROW_ADDR_3		0x00004000
+
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
 
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 1f0a7fc7772f..d0c66a0975cf 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -232,10 +232,17 @@ enum spi_nor_option_flags {
 };
 
 /**
+ * struct flash_info - Forward declaration of a structure used internally by
+ *		       spi_nor_scan()
+ */
+struct flash_info;
+
+/**
  * struct spi_nor - Structure for defining a the SPI NOR layer
  * @mtd:		point to a mtd_info structure
  * @lock:		the lock for the read/write/erase/lock/unlock operations
  * @dev:		point to a spi device, or a spi nor controller device.
+ * @info:		spi-nor part JDEC MFR id and other info
  * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
@@ -262,6 +269,7 @@ enum spi_nor_option_flags {
  * @flash_lock:		[FLASH-SPECIFIC] lock a region of the SPI NOR
  * @flash_unlock:	[FLASH-SPECIFIC] unlock a region of the SPI NOR
  * @flash_is_locked:	[FLASH-SPECIFIC] check if a region of the SPI NOR is
+ * @quad_enable:	[FLASH-SPECIFIC] enables SPI NOR quad mode
  *			completely locked
  * @priv:		the private data
  */
@@ -269,6 +277,7 @@ struct spi_nor {
 	struct mtd_info		mtd;
 	struct mutex		lock;
 	struct device		*dev;
+	const struct flash_info	*info;
 	u32			page_size;
 	u8			addr_width;
 	u8			erase_opcode;
@@ -296,6 +305,7 @@ struct spi_nor {
 	int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
 	int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
 	int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+	int (*quad_enable)(struct spi_nor *nor);
 
 	void *priv;
 };
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 25e267f1970c..619df2431e75 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -64,21 +64,4 @@ struct gpmc_nand_regs {
 	void __iomem	*gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
 	void __iomem	*gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
 };
-
-struct omap_nand_platform_data {
-	int			cs;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	bool			flash_bbt;
-	enum nand_io		xfer_type;
-	int			devsize;
-	enum omap_ecc           ecc_opt;
-
-	struct device_node	*elm_of_node;
-
-	/* deprecated */
-	struct gpmc_nand_regs	reg;
-	struct device_node	*of_node;
-	bool			dev_ready;
-};
 #endif
diff --git a/lib/Kconfig b/lib/Kconfig
index 368972f0db78..c5e84fbcb30b 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_IOMAP
 	bool
 	select GENERIC_PCI_IOMAP
 
-config GENERIC_IO
-	bool
-	default n
-
 config STMP_DEVICE
 	bool
author	Linus Torvalds <torvalds@linux-foundation.org>	2017-11-23 09:46:06 +0300
committer	Linus Torvalds <torvalds@linux-foundation.org>	2017-11-23 09:46:06 +0300
commit	14b661ebb6cfa386afa5a5247eb09e24d420af3a (patch)
tree	3917a344c6fc46b2365077e99a27d84b9e2f2675
parent	3f3211e755f329c56acf55faa0dbf91befd7b5ca (diff)
parent	1530578abdac4edce9244c7a1962ded3ffdb58ce (diff)
download	linux-14b661ebb6cfa386afa5a5247eb09e24d420af3a.tar.xz