OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbers

Define MDR1 register serial definitions used in serial and
bluetooth drivers.
Change magic number to ones defined in serial_reg for omap1/2
serial driver.
Remove redefined MDR1 register definitions in omap-serial driver.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: G, Manjunath Kondaiah <manjugk@ti.com>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

5 files changed, 28 insertions, 14 deletions

diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b78d0749f13d..c73d1b77b364 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -52,9 +52,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
  */
 static void __init omap_serial_reset(struct plat_serial8250_port *p)
 {
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x07);	/* disable UART */
+	omap_serial_outp(p, UART_OMAP_MDR1,
+			UART_OMAP_MDR1_DISABLE);	/* disable UART */
 	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x00);	/* enable UART */
+	omap_serial_outp(p, UART_OMAP_MDR1,
+			UART_OMAP_MDR1_16X_MODE);	/* enable UART */
 
 	if (!cpu_is_omap15xx()) {
 		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index d17960a1be25..fa9806250b50 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -169,9 +169,9 @@ static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
 
 static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
-	serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
+	serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
 	serial_write_reg(uart, UART_OMAP_SCR, 0x08);
-	serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+	serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
 }
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@@ -247,9 +247,10 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
 	uart->context_valid = 0;
 
 	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
-		omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
+		omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0);
 	else
-		serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
+		serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+
 	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
 	efr = serial_read_reg(uart, UART_EFR);
 	serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
@@ -268,11 +269,13 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
 	serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
 	serial_write_reg(uart, UART_OMAP_WER, uart->wer);
 	serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
+
 	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
-		omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
+		omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1);
 	else
 		/* UART 16x mode */
-		serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+		serial_write_reg(uart, UART_OMAP_MDR1,
+				UART_OMAP_MDR1_16X_MODE);
 }
 #else
 static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index c8dae02f0704..6a1788014611 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -31,9 +31,6 @@
  */
 #define OMAP_SERIAL_NAME	"ttyO"
 
-#define OMAP_MDR1_DISABLE	0x07
-#define OMAP_MDR1_MODE13X	0x03
-#define OMAP_MDR1_MODE16X	0x00
 #define OMAP_MODE13X_SPEED	230400
 
 /*
diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
index 14365f72b664..03a96db67de4 100644
--- a/drivers/serial/omap-serial.c
+++ b/drivers/serial/omap-serial.c
@@ -753,7 +753,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* Protocol, Baud Rate, and Interrupt Settings */
 
-	serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
+	serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
 	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
 
 	up->efr = serial_in(up, UART_EFR);
@@ -774,9 +774,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	serial_out(up, UART_LCR, cval);
 
 	if (baud > 230400 && baud != 3000000)
-		serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
+		serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
 	else
-		serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
+		serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
 
 	/* Hardware Flow Control Configuration */
 
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index c7a0ce11cd47..6f3823474e6c 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -341,5 +341,17 @@
 #define UART_OMAP_SYSS		0x16	/* System status register */
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE		0x00	/* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE		0x01	/* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE	0x02	/* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE		0x03	/* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE		0x04	/* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE		0x05	/* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE		0x06	/* CIR mode */
+#define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
+
 #endif /* _LINUX_SERIAL_REG_H */