diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-09-11 06:54:48 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-09-11 06:54:48 +0300 |
| commit | e90937e756938f03d37d4cae7c82316a3a425944 (patch) | |
| tree | 0667f5ac6ad368278e9658ba483c79d1a60a65cd | |
| parent | ae46654bcff303b33facbbd04a3ad9c21d303f9b (diff) | |
| parent | b884026a2b80529fc7a4de729b92ee0ba555bfed (diff) | |
| download | linux-e90937e756938f03d37d4cae7c82316a3a425944.tar.xz | |
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson:
"As usual, device tree updates is the bulk of our material in this
merge window. This time around, 559 patches affecting both 32- and
64-bit platforms.
Changes are too many to list individually, but some of the larger
ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also
several new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board"
* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
ARM: dts: at91: at91sam9g45: add AC97
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
...
487 files changed, 22378 insertions, 2316 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 520cdd2127cf..4e4bc0bae597 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -1,6 +1,18 @@ Amlogic MesonX device tree bindings ------------------------------------------- +Work in progress statement: + +Device tree files and bindings applying to Amlogic SoCs and boards are +considered "unstable". Any Amlogic device tree binding may change at +any time. Be sure to use a device tree binary and a kernel image +generated from the same source tree. + +Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a +stable binding/ABI. + +--------------------------------------------------------------- + Boards with the Amlogic Meson6 SoC shall have the following properties: Required root node property: compatible: "amlogic,meson6" diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt index 9c97de23919a..3e3efa046ac5 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt @@ -42,6 +42,10 @@ Raspberry Pi Zero Required root node properties: compatible = "raspberrypi,model-zero", "brcm,bcm2835"; +Raspberry Pi Zero W +Required root node properties: +compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; + Generic BCM2835 board Required root node properties: compatible = "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/bhf.txt b/Documentation/devicetree/bindings/arm/bhf.txt new file mode 100644 index 000000000000..886b503caf9c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bhf.txt @@ -0,0 +1,6 @@ +Beckhoff Automation Platforms Device Tree Bindings +-------------------------------------------------- + +CX9020 Embedded PC +Required root node properties: + - compatible = "bhf,cx9020", "fsl,imx53"; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index a44253cad269..b92f12bd5244 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -200,6 +200,7 @@ described below. "arm,realview-smp" "brcm,bcm11351-cpu-method" "brcm,bcm23550" + "brcm,bcm2836-smp" "brcm,bcm-nsp-smp" "brcm,brahma-b15" "marvell,armada-375-smp" diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt b/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt new file mode 100644 index 000000000000..f3e9624534c6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt @@ -0,0 +1,15 @@ +Marvell Armada 8KPlus Platforms Device Tree Bindings +---------------------------------------------------- + +Boards using a SoC of the Marvell Armada 8KP families must carry +the following root node property: + + - compatible, with one of the following values: + + - "marvell,armada-8080", "marvell,armada-ap810-octa", "marvell,armada-ap810" + when the SoC being used is the Armada 8080 + +Example: + +compatible = "marvell,armada-8080-db", "marvell,armada-8080", + "marvell,armada-ap810-octa", "marvell,armada-ap810" diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index da7bd138e6f2..91d517849483 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -1,12 +1,12 @@ -MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings +MediaTek SoC based Platforms Device Tree Bindings -Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the -following property: +Boards with a MediaTek SoC shall have the following property: Required root node property: compatible: Must contain one of "mediatek,mt2701" + "mediatek,mt2712" "mediatek,mt6580" "mediatek,mt6589" "mediatek,mt6592" @@ -14,7 +14,8 @@ compatible: Must contain one of "mediatek,mt6795" "mediatek,mt6797" "mediatek,mt7622" - "mediatek,mt7623" + "mediatek,mt7623" which is referred to MT7623N SoC + "mediatek,mt7623a" "mediatek,mt8127" "mediatek,mt8135" "mediatek,mt8173" @@ -25,6 +26,9 @@ Supported boards: - Evaluation board for MT2701: Required root node properties: - compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; +- Evaluation board for MT2712: + Required root node properties: + - compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; - Evaluation board for MT6580: Required root node properties: - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; @@ -46,9 +50,11 @@ Supported boards: - Reference board variant 1 for MT7622: Required root node properties: - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; -- Evaluation board for MT7623: +- Reference board for MT7623n with NAND: Required root node properties: - - compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; + - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623"; +- Bananapi BPI-R2 board: + - compatible = "bananapi,bpi-r2", "mediatek,mt7623"; - MTK mt8127 tablet moose EVB: Required root node properties: - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 9c6bebe43449..2ecc712bf707 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -157,6 +157,9 @@ Boards: - AM335X phyCORE-AM335x: Development kit compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx" +- AM335X UC-8100-ME-T: Communication-centric industrial computing platform + compatible = "moxa,uc-8100-me-t", "ti,am33xx"; + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" @@ -187,6 +190,9 @@ Boards: - AM5718 IDK compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7" +- DRA762 EVM: Software Development Board for DRA762 + compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt index 028d16e72186..0ed4d39d7fe1 100644 --- a/Documentation/devicetree/bindings/arm/qcom.txt +++ b/Documentation/devicetree/bindings/arm/qcom.txt @@ -25,6 +25,7 @@ The 'SoC' element must be one of the following strings: msm8994 msm8996 mdm9615 + ipq8074 The 'board' element must be one of the following strings: @@ -33,6 +34,7 @@ The 'board' element must be one of the following strings: dragonboard mtp sbc + hk01 The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> where the minor number may be omitted when it's zero, i.e. v1.0 is the same diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 11c0ac4a2d56..b003148e2945 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -134,6 +134,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; +- Pine64 Rock64 board: + Required root node properties: + - compatible = "pine64,rock64", "rockchip,rk3328"; + - Rockchip PX3 Evaluation board: Required root node properties: - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; @@ -173,6 +177,14 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; +- Rockchip RK3399 Sapphire Excavator board: + Required root node properties: + - compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399"; + +- Theobroma Systems RK3399-Q7 Haikou Baseboard: + Required root node properties: + - compatible = "tsd,rk3399-q7-haikou", "rockchip,rk3399"; + - Tronsmart Orion R68 Meta Required root node properties: - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 1a671e329864..ae75cb3b1331 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,6 +39,8 @@ SoCs: compatible = "renesas,r8a7795" - R-Car M3-W (R8A77960) compatible = "renesas,r8a7796" + - R-Car D3 (R8A77995) + compatible = "renesas,r8a77995" Boards: @@ -53,6 +55,8 @@ Boards: compatible = "renesas,blanche", "renesas,r8a7792" - BOCK-W compatible = "renesas,bockw", "renesas,r8a7778" + - Draak (RTP0RC77995SEB0010S) + compatible = "renesas,draak", "renesas,r8a77995" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - GR-Peach (X28A-M01-E/F) @@ -64,6 +68,10 @@ Boards: compatible = "renesas,h3ulcb", "renesas,r8a7795"; - Henninger compatible = "renesas,henninger", "renesas,r8a7791" + - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) + compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745" + - iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) + compatible = "iwave,g22m", "renesas,r8a7745" - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 207682647d33..b455c5aa9139 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -16,18 +16,25 @@ Required Properties: mapped region. - #clock-cells: should be 1. +- #reset-cells: should be 1. Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be used in device tree sources. +Similarly a preprocessor macro for each reset line is defined in +dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the +device tree sources). + + Example: Clock controller node: clkc: clock-controller@c1104000 { - #clock-cells = <1>; compatible = "amlogic,meson8b-clkc"; reg = <0xc1108000 0x4>, <0xc1104000 0x460>; + #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index cb7ffc58c564..b1a8929c2536 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -13,6 +13,7 @@ Required properties: - compatible : Shall contain one or more of - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX + - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX When compatible with generic versions, nodes must list the SoC-specific diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index c6cb96a4fa93..4bbd1e9bf3be 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -36,8 +36,10 @@ Required Properties: When supplied they must be named "dclkin.x" with "x" being the input clock numerical index. - - vsps: A list of phandles to the VSP nodes that handle the memory - interfaces for the DU channels. + - vsps: A list of phandle and channel index tuples to the VSPs that handle + the memory interfaces for the DU channels. The phandle identifies the VSP + instance that serves the DU channel, and the channel index identifies the + LIF instance in that VSP. Required nodes: @@ -59,24 +61,24 @@ corresponding to each DU output. R8A7796 (M3-W) DPAD HDMI LVDS - -Example: R8A7790 (R-Car H2) DU +Example: R8A7795 (R-Car H3) ES2.0 DU - du: du@feb00000 { - compatible = "renesas,du-r8a7790"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x1c>, - <0 0xfeb94000 0 0x1c>; - reg-names = "du", "lvds.0", "lvds.1"; - interrupt-parent = <&gic>; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>, - <0 269 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_DU0>, - <&mstp7_clks R8A7790_CLK_DU1>, - <&mstp7_clks R8A7790_CLK_DU2>, - <&mstp7_clks R8A7790_CLK_LVDS0>, - <&mstp7_clks R8A7790_CLK_LVDS1>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; + du: display@feb00000 { + compatible = "renesas,du-r8a7795"; + reg = <0 0xfeb00000 0 0x80000>, + <0 0xfeb90000 0 0x14>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&cpg CPG_MOD 727>; + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; ports { #address-cells = <1>; @@ -89,12 +91,19 @@ Example: R8A7790 (R-Car H2) DU }; port@1 { reg = <1>; - du_out_lvds0: endpoint { + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; }; }; port@2 { reg = <2>; - du_out_lvds1: endpoint { + du_out_hdmi1: endpoint { + remote-endpoint = <&dw_hdmi1_in>; + }; + }; + port@3 { + reg = <3>; + du_out_lvds0: endpoint { }; }; }; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 33d9e386dc45..41f0c1a07c56 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -9,7 +9,12 @@ execute the actual DMA tansfer. eDMA3 Channel Controller Required properties: -- compatible: "ti,edma3-tpcc" for the channel controller(s) +-------------------- +- compatible: Should be: + - "ti,edma3-tpcc" for the channel controller(s) on OMAP, + AM33xx and AM43xx SoCs. + - "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the + channel controller(s) on 66AK2G. - #dma-cells: Should be set to <2>. The first number is the DMA request number and the second is the TC the channel is serviced on. - reg: Memory map of eDMA CC @@ -19,8 +24,19 @@ Required properties: - ti,tptcs: List of TPTCs associated with the eDMA in the following form: <&tptc_phandle TC_priority_number>. The highest priority is 0. +SoC-specific Required properties: +-------------------------------- +The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only: +- ti,hwmods: Name of the hwmods associated to the eDMA CC. + +The following are mandatory properties for 66AK2G SoCs only: +- power-domains:Should contain a phandle to a PM domain provider node + and an args specifier containing the device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Optional properties: -- ti,hwmods: Name of the hwmods associated to the eDMA CC +------------------- - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow these channels will be SW triggered channels. See example. - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by @@ -31,17 +47,34 @@ Optional properties: eDMA3 Transfer Controller Required properties: -- compatible: "ti,edma3-tptc" for the transfer controller(s) +-------------------- +- compatible: Should be: + - "ti,edma3-tptc" for the transfer controller(s) on OMAP, + AM33xx and AM43xx SoCs. + - "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the + transfer controller(s) on 66AK2G. - reg: Memory map of eDMA TC - interrupts: Interrupt number for TCerrint. +SoC-specific Required properties: +-------------------------------- +The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only: +- ti,hwmods: Name of the hwmods associated to the eDMA TC. + +The following are mandatory properties for 66AK2G SoCs only: +- power-domains:Should contain a phandle to a PM domain provider node + and an args specifier containing the device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Optional properties: -- ti,hwmods: Name of the hwmods associated to the given eDMA TC +------------------- - interrupt-names: "edma3_tcerrint" ------------------------------------------------------------------------------ -Example: +Examples: +1. edma: edma@49000000 { compatible = "ti,edma3-tpcc"; ti,hwmods = "tpcc"; @@ -108,6 +141,58 @@ mcasp0: mcasp@48038000 { dma-names = "tx", "rx"; }; +2. +edma1: edma@02728000 { + compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; + reg = <0x02728000 0x8000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <12 13 14 15>; + * for example. + */ + + power-domains = <&k2g_pds 0x4f>; +}; + +edma1_tptc0: tptc@027b0000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x027b0000 0x400>; + power-domains = <&k2g_pds 0x4f>; +}; + +edma1_tptc1: tptc@027b8000 { + compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x027b8000 0x400>; + power-domains = <&k2g_pds 0x4f>; +}; + +mmc0: mmc@23000000 { + compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + reg = <0x23000000 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; + dmas = <&edma1 24 0>, <&edma1 25 0>; + dma-names = "tx", "rx"; + bus-width = <4>; + ti,needs-special-reset; + no-1-8-v; + max-frequency = <96000000>; + power-domains = <&k2g_pds 0xb>; + clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>; + clock-names = "fck", "mmchsdb_fck"; + status = "disabled"; +}; + ------------------------------------------------------------------------------ DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc binding. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index 5aa5926029ee..039219df05c5 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -17,6 +17,7 @@ Required properties: * which must be preceded by one of the following vendor specifics: + "amlogic,meson-gxm-mali" + "rockchip,rk3288-mali" + + "rockchip,rk3399-mali" - reg : Physical base address of the device and length of the register area. diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index 11cc87aeb276..07bf0b9a5139 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -17,6 +17,7 @@ Required properties: "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582 "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580 "mediatek,mt6577-sysirq": for MT6577 + "mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712 "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701 - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 0e026c151c1c..3a4ac401e6f9 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -1,33 +1,55 @@ -* TI Highspeed MMC host controller for OMAP +* TI Highspeed MMC host controller for OMAP and 66AK2G family. -The Highspeed MMC Host Controller on TI OMAP family +The Highspeed MMC Host Controller on TI OMAP and 66AK2G family provides an interface for MMC, SD, and SDIO types of memory cards. This file documents differences between the core properties described by mmc.txt and the properties used by the omap_hsmmc driver. Required properties: +-------------------- - compatible: Should be "ti,omap2-hsmmc", for OMAP2 controllers Should be "ti,omap3-hsmmc", for OMAP3 controllers Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0 Should be "ti,omap4-hsmmc", for OMAP4 controllers Should be "ti,am33xx-hsmmc", for AM335x controllers -- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1 + Should be "ti,k2g-hsmmc", "ti,omap4-hsmmc" for 66AK2G controllers. + +SoC specific required properties: +--------------------------------- +The following are mandatory properties for OMAPs, AM33xx and AM43xx SoCs only: +- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1. + +The following are mandatory properties for 66AK2G SoCs only: +- power-domains:Should contain a phandle to a PM domain provider node + and an args specifier containing the MMC device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +- clocks: Must contain an entry for each entry in clock-names. Should + be defined as per the he appropriate clock bindings consumer + usage in Documentation/devicetree/bindings/clock/ti,sci-clk.txt +- clock-names: Shall be "fck" for the functional clock, + and "mmchsdb_fck" for the debounce clock. + Optional properties: -ti,dual-volt: boolean, supports dual voltage cards -<supply-name>-supply: phandle to the regulator device tree node -"supply-name" examples are "vmmc", "vmmc_aux"(deprecated)/"vqmmc" etc -ti,non-removable: non-removable slot (like eMMC) -ti,needs-special-reset: Requires a special softreset sequence -ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed -dmas: List of DMA specifiers with the controller specific format -as described in the generic DMA client binding. A tx and rx -specifier is required. -dma-names: List of DMA request names. These strings correspond -1:1 with the DMA specifiers listed in dmas. The string naming is -to be "rx" and "tx" for RX and TX DMA requests, respectively. +-------------------- +- ti,dual-volt: boolean, supports dual voltage cards +- <supply-name>-supply: phandle to the regulator device tree node + "supply-name" examples are "vmmc", + "vmmc_aux"(deprecated)/"vqmmc" etc +- ti,non-removable: non-removable slot (like eMMC) +- ti,needs-special-reset: Requires a special softreset sequence +- ti,needs-special-hs-handling: HSMMC IP needs special setting + for handling High Speed +- dmas: List of DMA specifiers with the controller specific + format as described in the generic DMA client + binding. A tx and rx specifier is required. +- dma-names: List of DMA request names. These strings correspond + 1:1 with the DMA specifiers listed in dmas. + The string naming is to be "rx" and "tx" for + RX and TX DMA requests, respectively. Examples: diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt index 5a1d8b0c39e9..2d504256b0d8 100644 --- a/Documentation/devicetree/bindings/net/can/c_can.txt +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -11,9 +11,20 @@ Required properties: - interrupts : property with a value describing the interrupt number -Optional properties: +The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only: - ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the instance number + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: +- power-domains : Should contain a phandle to a PM domain provider node + and an args specifier containing the DCAN device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +- clocks : CAN functional clock phandle. This property is as per the + binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +Optional properties: - syscon-raminit : Handle to system control region that contains the RAMINIT register, register offset to the RAMINIT register and the CAN instance number (0 offset). diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 1d1168b805cc..214eaa9a6683 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -20,8 +20,10 @@ Required properties: "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain a phandle to the ethsys reset signal -- reset-names: Should contain the reset signal name "eth" +- resets: Should contain phandles to the ethsys reset signals +- reset-names: Should contain the names of reset signal listed in the resets + property + These are "fe", "gmac" and "ppe" - mediatek,ethsys: phandle to the syscon node that handles the port setup - mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup which is required for those SoCs equipped with SGMII such as MT7622 SoC. diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 127ae1f53e5a..6173af6885f8 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -276,7 +276,7 @@ pcie-controller { clocks = <&gateclk 26>; }; - pcie@10,0 { + pcie@a,0 { device_type = "pci"; assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; reg = <0x5000 0 0 0 0>; diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt index 84404c9edff7..af21502e939c 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt @@ -1,12 +1,13 @@ DT bindings for the Renesas Advanced Power Management Unit -Renesas R-Car line of SoCs utilize one or more APMU hardware units +Renesas R-Car and RZ/G1 SoCs utilize one or more APMU hardware units for CPU core power domain control including SMP boot and CPU Hotplug. Required properties: - compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback. Examples with soctypes are: + - "renesas,r8a7743-apmu" (RZ/G1M) - "renesas,r8a7790-apmu" (R-Car H2) - "renesas,r8a7791-apmu" (R-Car M2-W) - "renesas,r8a7792-apmu" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index b6cf384597e1..f73abff3de43 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -3,6 +3,7 @@ Required properties: - compatible should contain: * "mediatek,mt2701-uart" for MT2701 compatible UARTS + * "mediatek,mt2712-uart" for MT2712 compatible UARTS * "mediatek,mt6580-uart" for MT6580 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index cc9f05d3cbc1..7dc5ce858a0e 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -21,6 +21,7 @@ Required Properties: - "rockchip,rk3328-grf", "syscon": for rk3328 - "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3399-grf", "syscon": for rk3399 + - "rockchip,rv1108-grf", "syscon": for rv1108 - compatible: PMUGRF should be one of the following: - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3399-pmugrf", "syscon": for rk3399 @@ -28,6 +29,8 @@ Required Properties: - "rockchip,rk3288-sgrf", "syscon": for rk3288 - compatible: USB2PHYGRF should be one of the followings - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328 +- compatible: USBGRF should be one of the following + - "rockchip,rv1108-usbgrf", "syscon": for rv1108 - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt index c705db07d820..66e6265fb0aa 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt @@ -46,12 +46,13 @@ Required Properties: - power-domains: phandle pointing to the corresponding PM domain node and an ID representing the device. -See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g. +See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list +of valid identifiers for k2g. Example (K2G): -------------------- uart0: serial@02530c00 { compatible = "ns16550a"; ... - power-domains = <&k2g_pds K2G_DEV_UART0>; + power-domains = <&k2g_pds 0x002c>; }; diff --git a/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt b/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt new file mode 100644 index 000000000000..712d05e3e15e --- /dev/null +++ b/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt @@ -0,0 +1,27 @@ +* Renesas SMP SRAM + +Renesas R-Car Gen2 and RZ/G1 SoCs need a small piece of SRAM for the jump stub +for secondary CPU bringup and CPU hotplug. +This memory is reserved by adding a child node to a "mmio-sram" node, cfr. +Documentation/devicetree/bindings/sram/sram.txt. + +Required child node properties: + - compatible: Must be "renesas,smp-sram", + - reg: Address and length of the reserved SRAM. + The full physical (bus) address must be aligned to a 256 KiB boundary. + + +Example: + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 5a79aeb620b3..69183f0fbc78 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -48,6 +48,7 @@ avic Shanghai AVIC Optoelectronics Co., Ltd. axentia Axentia Technologies AB axis Axis Communications AB bananapi BIPAI KEJI LIMITED +bhf Beckhoff Automation GmbH & Co. KG boe BOE Technology Group Co., Ltd. bosch Bosch Sensortec GmbH boundary Boundary Devices Inc. diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 6a00939a059a..20ada673ab0c 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -3,9 +3,9 @@ Mediatek SoCs Watchdog timer Required properties: - compatible should contain: - * "mediatek,mt2701-wdt" for MT2701 compatible watchdog timers - * "mediatek,mt6589-wdt" for all compatible watchdog timers (MT2701, - MT6589) + "mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701 + "mediatek,mt6589-wdt": for MT6589 + "mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797 - reg : Specifies base physical address and size of the registers. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4b17f35dc9a7..faf46abaa4a2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -46,6 +46,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ + at91-sama5d27_som1_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ at91-tse850-3.dtb \ @@ -73,7 +74,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-a-plus.dtb \ bcm2836-rpi-2-b.dtb \ bcm2837-rpi-3-b.dtb \ - bcm2835-rpi-zero.dtb + bcm2835-rpi-zero.dtb \ + bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ @@ -106,7 +108,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm953012hr.dtb \ bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_53573) += \ - bcm47189-tenda-ac9.dtb + bcm47189-tenda-ac9.dtb \ + bcm947189acdbmr.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ @@ -180,6 +183,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_GEMINI) += \ + gemini-dlink-dir-685.dtb \ gemini-nas4220b.dtb \ gemini-rut1xx.dtb \ gemini-sq201.dtb \ @@ -340,6 +344,7 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-ts4800.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ + imx53-cx9020.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ imx53-qsb.dtb \ @@ -391,7 +396,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ + imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ + imx6q-apalis-ixora-v1.1.dtb \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-b450v3.dtb \ @@ -466,7 +473,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ - imx6ul-geam-kit.dtb \ + imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ imx6ul-liteboard.dtb \ @@ -617,6 +624,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-evmsk.dtb \ am335x-icev2.dtb \ am335x-lxm.dtb \ + am335x-moxa-uc-8100-me-t.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ @@ -650,6 +658,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ + am57xx-beagle-x15-revc.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ @@ -657,7 +666,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ - dra71-evm.dtb + dra71-evm.dtb \ + dra76-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-kuroboxpro.dtb \ orion5x-lacie-d2-network.dtb \ @@ -903,6 +913,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ + sun8i-a83t-bananapi-m3.dtb \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ @@ -918,6 +929,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ + sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-parrot.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb @@ -970,7 +982,6 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-pro4-sanji.dtb \ uniphier-pxs2-gentil.dtb \ uniphier-pxs2-vodka.dtb \ - uniphier-sld3-ref.dtb \ uniphier-sld8-ref.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ @@ -1049,7 +1060,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ - mt7623-evb.dtb \ + mt7623n-rfb-nand.dtb \ + mt7623n-bananapi-bpi-r2.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 1d154444dfef..48a15fc641f2 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -319,13 +319,10 @@ ti,pmic-shutdown-controller; charger { - interrupts = <0>, <1>; - interrupt-names = "USB", "AC"; status = "okay"; }; pwrbutton { - interrupts = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index d8769799772e..59431b235944 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -191,13 +191,10 @@ interrupts = <7>; /* NNMI */ charger { - interrupts = <0>, <1>; - interrupt-names = "USB", "AC"; status = "okay"; }; pwrbutton { - interrupts = <2>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 1c37a7c1ea17..ddd897556e03 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -531,6 +531,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts new file mode 100644 index 000000000000..f82233cd18e0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -0,0 +1,525 @@ +/* + * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/ + * + * Author: SZ Lin (林上智) <sz.lin@moxa.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "Moxa UC-8100-ME-T"; + compatible = "moxa,uc-8100-me-t", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: vmmcsd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "uc8100me:CEL1"; + gpios = <&gpio_xten 8 0>; + default-state = "off"; + }; + + led2 { + label = "uc8100me:CEL2"; + gpios = <&gpio_xten 9 0>; + default-state = "off"; + }; + + led3 { + label = "uc8100me:CEL3"; + gpios = <&gpio_xten 10 0>; + default-state = "off"; + }; + + led4 { + label = "uc8100me:DIA1"; + gpios = <&gpio_xten 11 0>; + default-state = "off"; + }; + led5 { + label = "uc8100me:DIA2"; + gpios = <&gpio_xten 12 0>; + default-state = "off"; + }; + led6 { + label = "uc8100me:DIA3"; + gpios = <&gpio_xten 13 0>; + default-state = "off"; + }; + led7 { + label = "uc8100me:SD"; + gpios = <&gpio_xten 14 0>; + default-state = "off"; + }; + led8 { + label = "uc8100me:USB"; + gpios = <&gpio_xten 15 0>; + default-state = "off"; + }; + led9 { + label = "uc8100me:USER"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + buttons: push_button { + compatible = "gpio-keys"; + }; + +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_pins>; + + minipcie_pins: pinmux_minipcie { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2_24 */ + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ + AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ + >; + }; + + push_button_pins: pinmux_push_button { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_ctsn.i2c1_sda */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_rtsn.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE6) /* lcd_data14.uart5_ctsn */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data15.uart5_rtsn */ + AM33XX_IOPAD(0x8c4, PIN_INPUT_PULLUP | MUX_MODE4) /* lcd_data9.uart5_rxd */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE4) /* lcd_data8.uart5_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + + /* Slave 2 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + mmc0_pins_default: pinmux_mmc0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ + >; + }; + + mmc2_pins_default: pinmux_mmc2_pins { + pinctrl-single,pins = < + /* eMMC */ + AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ + AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ + AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ + AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + >; + }; + + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + >; + }; + +}; + +&uart0 { + /* Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart1 { + /* UART 1 setting */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart5 { + /* UART 2 setting */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + + tps: tps@2d { + compatible = "ti,tps65910"; + reg = <0x2d>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + pagesize = <16>; + reg = <0x50>; + }; + + rtc_wdt: rtc_wdt@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <400000>; + gpio_xten: gpio_xten@27 { + compatible = "nxp,pca9535"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x27>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vmmc_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; +}; + +&cpsw_emac0 { + status = "okay"; + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + status = "okay"; + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rmii"; + dual_emac_res_vlan = <2>; +}; + +&phy_sel { + reg= <0x44e10650 0xf5>; + rmii-clock-ext; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&mmc1 { + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-0 = <&mmc0_pins_default>; + cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-0 = <&mmc2_pins_default>; + ti,non-removable; + status = "okay"; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "push_button"; + linux,code = <0x100>; + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + m25p80@0 { + compatible = "mx25l6405d"; + spi-max-frequency = <40000000>; + + reg = <0>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* reg : The partition's offset and size within the mtd bank. */ + partitions@0 { + label = "MLO"; + reg = <0x0 0x80000>; + }; + + partitions@1 { + label = "U-Boot"; + reg = <0x80000 0x100000>; + }; + + partitions@2 { + label = "U-Boot Env"; + reg = <0x180000 0x20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 29a538ecd405..afb8eb0a0a16 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -149,6 +149,13 @@ system-clock-frequency = <12000000>; }; }; + + beeper: beeper { + compatible = "gpio-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&beeper_pins>; + gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + }; }; &am43xx_pinmux { @@ -510,6 +517,13 @@ AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; + + beeper_pins: beeper_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ + >; + }; + }; &uart0 { @@ -842,6 +856,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 54f40f370011..9d276af7c539 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -564,6 +564,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 7b207835b2d1..debf9464403e 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -11,6 +11,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "am57xx-idk-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" / { model = "TI AM5718 IDK"; @@ -64,13 +65,6 @@ }; }; -&mmc1 { - status = "okay"; - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 0>; /* gpio 219 */ -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; @@ -96,3 +90,30 @@ status = "okay"; }; }; + +&pcie1_rc { + status = "okay"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&pcie1_ep { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 9da6d83ca185..a578fe97ba3b 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "am57xx-idk-common.dtsi" +#include "dra74x-mmc-iodelay.dtsi" / { model = "TI AM5728 IDK"; @@ -67,6 +68,24 @@ }; }; +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20>; +}; + &omap_dwc3_2 { extcon = <&extcon_usb2>; }; @@ -76,19 +95,16 @@ vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; }; -&mmc1 { - status = "okay"; - vmmc-supply = <&v3_3d>; - vmmc_aux-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 0>; /* gpio 219 */ -}; - &sn65hvs882 { load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; }; -&pcie1 { +&pcie1_rc { + status = "okay"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&pcie1_ep { gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index fdfe5b16b806..49aeecd312b4 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -9,6 +9,7 @@ #include "dra74x.dtsi" #include "am57xx-commercial-grade.dtsi" +#include "dra74x-mmc-iodelay.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -166,34 +167,6 @@ }; }; -&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; -}; &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -570,7 +543,12 @@ }; }; -&pcie1 { +&pcie1_rc { + status = "ok"; + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; +}; + +&pcie1_ep { gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index 39a92aff0a0d..5a77b334923d 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -19,8 +19,23 @@ }; &mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; vmmc-supply = <&vdd_3v3>; - vmmc-aux-supply = <&ldo1_reg>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; }; /* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts new file mode 100644 index 000000000000..17c41da3b55f --- /dev/null +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-beagle-x15-common.dtsi" + +/ { + model = "TI AM5728 BeagleBoard-X15 rev C"; +}; + +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ +}; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 19a60a11c198..d6689106d2a8 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -20,9 +20,20 @@ }; &mmc1 { + pinctrl-names = "default", "hs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + vmmc-supply = <&ldo1_reg>; }; +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; +}; + /* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ &phy1 { max-speed = <100>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index c536b2f5389f..97aa8e6a56da 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -399,6 +399,14 @@ dr_mode = "peripheral"; }; +&mmc1 { + status = "okay"; + vmmc-supply = <&v3_3d>; + vqmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ +}; + &mmc2 { status = "okay"; vmmc-supply = <&v3_3d>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index f9cf1273f35e..b1cf5a26f3c2 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -72,7 +72,7 @@ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>; }; - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -100,6 +100,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; @@ -117,6 +118,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 62>; marvell,pcie-port = <1>; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 50c5e8417802..7225c7ce9a8d 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -582,7 +582,7 @@ }; }; - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -610,6 +610,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -627,6 +628,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index e392f6036f39..132596fd0860 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -71,7 +71,7 @@ }; }; - pcie-controller { + pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -104,6 +104,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -122,6 +123,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -140,6 +142,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index db5b9f6b615d..25d2d720dc0e 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -209,7 +209,7 @@ status = "okay"; }; - pcie-controller { + pcie { status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index be16ce39fb3d..06831e1e3f80 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -96,7 +96,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; pcie@1,0 { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 7fcc4c4885cf..74863aff01c6 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -70,7 +70,7 @@ }; soc { - pciec: pcie-controller { + pciec: pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -109,6 +109,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -127,6 +128,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -145,6 +147,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; @@ -166,6 +169,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <3>; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 0d5f1f062275..ee7b0089eff0 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -62,7 +62,7 @@ }; }; - pcie-controller { + pcie { pcie@3,0 { /* Port 2, Lane 0. CON2, nearest CPU. */ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 0f5938bede53..68acfc968706 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -104,7 +104,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; /* * The two PCIe units are accessible through diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 1ac923826445..a4ec1fa37529 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -172,7 +172,7 @@ status = "okay"; }; - pcie-controller { + pcie { status = "okay"; /* * The two PCIe units are accessible through diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 563901e0ec07..f503955dbd3b 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -240,7 +240,7 @@ status = "okay"; }; - pcie-controller { + pcie { status = "okay"; /* * One PCIe units is accessible through diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index af82f275eac2..9cc3ca0376b9 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -117,7 +117,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; /* * One PCIe units is accessible through diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index af31f5d6c0e5..7ff0811e61db 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -154,6 +154,13 @@ reg = <0xc000 0x58>; }; + timer@c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xc200 0x20>; + interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; + clocks = <&coreclk 2>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 2afed2ce4741..c718a5242595 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -123,7 +123,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; /* CON30 */ diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts index 2cdbba804c1e..ef491b524fd6 100644 --- a/arch/arm/boot/dts/armada-395-gp.dts +++ b/arch/arm/boot/dts/armada-395-gp.dts @@ -139,7 +139,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index e8604281c3c9..f0e0379f7619 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -118,7 +118,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; pcie@1,0 { diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 60fbfd5907c7..ea657071e278 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -442,7 +442,7 @@ }; }; - pcie-controller { + pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -481,6 +481,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -499,6 +500,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -517,6 +519,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; @@ -538,6 +541,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <3>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index be22ec5236ac..bdd4c7a45fbf 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -91,7 +91,7 @@ /* * 98DX3236 has 1 x1 PCIe unit Gen2.0 */ - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -116,6 +116,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index a33974254d8c..065282c21789 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -242,7 +242,7 @@ /* Port 2, Lane 0 */ status = "okay"; }; - pcie@10,0 { + pcie@a,0 { /* Port 3, Lane 0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index d62bf7bea1df..ac9eab8ac186 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -227,7 +227,7 @@ /* Port 2, Lane 0 */ status = "okay"; }; - pcie@10,0 { + pcie@a,0 { /* Port 3, Lane 0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 9f25814077f2..129738f7973d 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -86,7 +86,7 @@ * configured as x4 or quad x1 lanes. One unit is * x1 only. */ - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -123,6 +123,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; @@ -140,6 +141,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -157,6 +159,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 60>; marvell,pcie-port = <0>; @@ -174,6 +177,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 61>; marvell,pcie-port = <0>; @@ -191,6 +195,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 62>; marvell,pcie-port = <1>; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2bfe07aebf1a..e58d597e37b9 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -87,7 +87,7 @@ * configured as x4 or quad x1 lanes. One unit is * x4 only. */ - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -138,6 +138,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; @@ -155,6 +156,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -172,6 +174,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 60>; marvell,pcie-port = <0>; @@ -189,6 +192,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 61>; marvell,pcie-port = <0>; @@ -206,6 +210,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 62>; marvell,pcie-port = <1>; @@ -223,6 +228,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 63>; marvell,pcie-port = <1>; @@ -240,6 +246,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 64>; marvell,pcie-port = <1>; @@ -257,6 +264,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 65>; marvell,pcie-port = <1>; @@ -274,6 +282,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 99>; marvell,pcie-port = <2>; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 6c33935f7074..a5c961cee7de 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -104,7 +104,7 @@ * configured as x4 or quad x1 lanes. Two units are * x4/x1. */ - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -159,6 +159,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; @@ -176,6 +177,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -193,6 +195,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 60>; marvell,pcie-port = <0>; @@ -210,6 +213,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 61>; marvell,pcie-port = <0>; @@ -227,6 +231,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 62>; marvell,pcie-port = <1>; @@ -244,6 +249,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 63>; marvell,pcie-port = <1>; @@ -261,6 +267,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 64>; marvell,pcie-port = <1>; @@ -278,6 +285,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 65>; marvell,pcie-port = <1>; @@ -295,6 +303,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 99>; marvell,pcie-port = <2>; @@ -303,7 +312,7 @@ status = "disabled"; }; - pcie10: pcie@10,0 { + pcie10: pcie@a,0 { device_type = "pci"; assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; reg = <0x5000 0 0 0 0>; @@ -312,6 +321,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 0x81000000 0 0 0x81000000 0xa 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 103>; marvell,pcie-port = <3>; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 8a04c7e2d818..22b958537d31 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -26,7 +26,7 @@ fmc: flash-controller@1e620000 { reg = < 0x1e620000 0x94 - 0x20000000 0x02000000 >; + 0x20000000 0x10000000 >; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-fmc"; @@ -41,7 +41,7 @@ spi: flash-controller@1e630000 { reg = < 0x1e630000 0x18 - 0x30000000 0x02000000 >; + 0x30000000 0x10000000 >; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-spi"; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi new file mode 100644 index 000000000000..63a5af898165 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -0,0 +1,102 @@ +/* + * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board + * + * Copyright (c) 2017, Microchip Technology Inc. + * 2017 Cristian Birsan <cristian.birsan@microchip.com> + * 2017 Claudiu Beznea <claudiu.beznea@microchip.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" + +/ { + model = "Atmel SAMA5D27 SoM1"; + compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + ahb { + apb { + macb0: ethernet@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default>; + phy-mode = "rmii"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_phy_irq>; + }; + }; + + pinctrl@fc038000 { + + pinctrl_macb0_default: macb0_default { + pinmux = <PIN_PD9__GTXCK>, + <PIN_PD10__GTXEN>, + <PIN_PD11__GRXDV>, + <PIN_PD12__GRXER>, + <PIN_PD13__GRX0>, + <PIN_PD14__GRX1>, + <PIN_PD15__GTX0>, + <PIN_PD16__GTX1>, + <PIN_PD17__GMDC>, + <PIN_PD18__GMDIO>; + bias-disable; + }; + + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PD31__GPIO>; + bias-disable; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts new file mode 100644 index 000000000000..9c9088c99cc4 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -0,0 +1,537 @@ +/* + * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board + * + * Copyright (c) 2017, Microchip Technology Inc. + * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2017 Cristian Birsan <cristian.birsan@microchip.com> + * 2017 Claudiu Beznea <claudiu.beznea@microchip.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "at91-sama5d27_som1.dtsi" +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Atmel SAMA5D27 SOM1 EK"; + compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ahb { + usb0: gadget@00300000 { + atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00400000 { + num-ports = <3>; + atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; + }; + + usb2: ehci@00500000 { + status = "okay"; + }; + + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; + }; + + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; + }; + + apb { + isc: isc@f0008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>; + status = "okay"; + }; + + spi0: spi@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; + status = "okay"; + }; + + macb0: ethernet@f8008000 { + status = "okay"; + }; + + uart1: serial@f8020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; + + uart2: serial@f8024000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_uart>; + atmel,use-dma-rx; + atmel-use-dma-tx; + status = "okay"; + }; + + pwm0: pwm@f802c000 { + status = "okay"; + }; + + flx1: flexcom@f8038000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "disabled"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx1_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus_i2c>; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + shdwc@f8048010 { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; + }; + + watchdog@f8048040 { + status = "okay"; + }; + + can0: can@f8054000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + }; + + uart3: serial@fc008000 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_default>; + status = "disabled"; + }; + + uart4: serial@fc00c000 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-name = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_uart>; + status = "okay"; + }; + + flx3: flexcom@fc014000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "disabled"; + + uart7: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx3_clk>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx3_default>; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx3_clk>; + clock-names = "spi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx3_default>; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx4: flexcom@fc018000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "okay"; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx4_clk>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx4_clk>; + clock-names = "spi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; + atmel,fifo-size = <16>; + status = "okay"; + }; + + i2c3: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx4_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + i2c1: i2c@fc028000 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + }; + + pinctrl@fc038000 { + + pinctrl_can0_default: can0_default { + pinmux = <PIN_PC10__CANTX0>, + <PIN_PC11__CANRX0>; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = <PIN_PC26__CANTX1>, + <PIN_PC27__CANRX1>; + bias-disable; + }; + + pinctrl_flx3_default: flx3_default { + pinmux = <PIN_PC20__FLEXCOM3_IO0>, + <PIN_PC19__FLEXCOM3_IO1>, + <PIN_PC18__FLEXCOM3_IO2>, + <PIN_PC21__FLEXCOM3_IO3>, + <PIN_PC22__FLEXCOM3_IO4>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PD4__TWD1>, + <PIN_PD5__TWCK1>; + bias-disable; + }; + + pinctrl_isc_base: isc_base { + pinmux = <PIN_PC21__ISC_PCK>, + <PIN_PC22__ISC_VSYNC>, + <PIN_PC23__ISC_HSYNC>, + <PIN_PC24__ISC_MCK>; + bias-disable; + }; + + pinctrl_isc_data_8bit: isc_data_8bit { + pinmux = <PIN_PC20__ISC_D11>, + <PIN_PC19__ISC_D10>, + <PIN_PC18__ISC_D9>, + <PIN_PC17__ISC_D8>, + <PIN_PC16__ISC_D7>, + <PIN_PC15__ISC_D6>, + <PIN_PC14__ISC_D5>, + <PIN_PC13__ISC_D4>; + bias-disable; + }; + + pinctrl_isc_data_9_10: isc_data_9_10 { + pinmux = <PIN_PC12__ISC_D3>, + <PIN_PC11__ISC_D2>; + bias-disable; + }; + + pinctrl_isc_data_11_12: isc_data_11_12 { + pinmux = <PIN_PC10__ISC_D1>, + <PIN_PC9__ISC_D0>; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PA29__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PA27__GPIO>, + <PIN_PB1__GPIO>, + <PIN_PA31__GPIO>; + bias-pull-up; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>, + <PIN_PA6__SDMMC0_DAT4>, + <PIN_PA7__SDMMC0_DAT5>, + <PIN_PA8__SDMMC0_DAT6>, + <PIN_PA9__SDMMC0_DAT7>; + bias-pull-up; + }; + + ck_cd_vddsel { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA11__SDMMC0_VDDSEL>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = <PIN_PA28__SDMMC1_CMD>, + <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-pull-up; + }; + + conf-ck_cd { + pinmux = <PIN_PA22__SDMMC1_CK>, + <PIN_PA30__SDMMC1_CD>; + bias-disable; + }; + }; + + pinctrl_spi0_default: spi0_default { + pinmux = <PIN_PA14__SPI0_SPCK>, + <PIN_PA15__SPI0_MOSI>, + <PIN_PA16__SPI0_MISO>, + <PIN_PA17__SPI0_NPCS0>; + bias-disable; + }; + + pinctrl_uart1_default: uart1_default { + pinmux = <PIN_PD2__URXD1>, + <PIN_PD3__UTXD1>; + bias-disable; + }; + + pinctrl_uart3_default: uart3_default { + pinmux = <PIN_PC12__URXD3>, + <PIN_PC13__UTXD3>; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PA10__GPIO>, + <PIN_PD19__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PD20__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus1_an: mikrobus1_an { + pinmux = <PIN_PD25__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus2_an: mikrobus2_an { + pinmux = <PIN_PD26__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus1_rst: mikrobus1_rst { + pinmux = <PIN_PB2__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus2_rst: mikrobus2_rst { + pinmux = <PIN_PA26__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { + pinmux = <PIN_PD0__FLEXCOM4_IO4>; + bias-disable; + }; + + pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs { + pinmux = <PIN_PC31__FLEXCOM4_IO3>; + bias-disable; + }; + + pinctrl_mikrobus_spi: mikrobus_spi { + pinmux = <PIN_PC28__FLEXCOM4_IO0>, + <PIN_PC29__FLEXCOM4_IO1>, + <PIN_PC30__FLEXCOM4_IO2>; + bias-disable; + }; + + pinctrl_mikrobus1_pwm: mikrobus1_pwm { + pinmux = <PIN_PB1__PWML1>; + bias-disable; + }; + + pinctrl_mikrobus2_pwm: mikrobus2_pwm { + pinmux = <PIN_PA31__PWML0>; + bias-disable; + }; + + pinctrl_mikrobus1_int: mikrobus1_int { + pinmux = <PIN_PB0__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus2_int: mikrobus2_int { + pinmux = <PIN_PA25__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus1_uart: mikrobus1_uart { + pinmux = <PIN_PB3__URXD4>, + <PIN_PB4__UTXD4>; + bias-disable; + }; + + pinctrl_mikrobus2_uart: mikrobus2_uart { + pinmux = <PIN_PD23__URXD2>, + <PIN_PD24__UTXD2>; + bias-disable; + }; + + pinctrl_mikrobus_i2c: mikrobus1_i2c { + pinmux = <PIN_PA24__FLEXCOM1_IO0>, + <PIN_PA23__FLEXCOM1_IO1>; + bias-disable; + }; + + pinctrl_flx4_default: flx4_uart_default { + pinmux = <PIN_PC28__FLEXCOM4_IO0>, + <PIN_PC29__FLEXCOM4_IO1>, + <PIN_PC30__FLEXCOM4_IO2>, + <PIN_PC31__FLEXCOM4_IO3>, + <PIN_PD0__FLEXCOM4_IO4>; + bias-disable; + }; + }; + + can1: can@fc050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + pb4 { + label = "USER"; + gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>; + }; + + green { + label = "green"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>; + }; + + blue { + label = "blue"; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 2e2c3d1a1fa2..c7e9ccf2bc87 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -68,7 +68,7 @@ ahb { usb0: gadget@00300000 { - atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -76,8 +76,8 @@ usb1: ohci@00400000 { num-ports = <3>; - atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */ - &pioA 42 GPIO_ACTIVE_HIGH + atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ + &pioA PIN_PB10 GPIO_ACTIVE_HIGH 0 >; pinctrl-names = "default"; @@ -127,7 +127,7 @@ ethernet-phy@1 { reg = <0x1>; interrupt-parent = <&pioA>; - interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -160,9 +160,9 @@ compatible = "active-semi,act8945a"; reg = <0x5b>; active-semi,vsel-high; - active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; - active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; - active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>; + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; + active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>; active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; @@ -355,6 +355,14 @@ bias-pull-up; }; + pinctrl_classd_default: classd_default { + pinmux = <PIN_PB1__CLASSD_R0>, + <PIN_PB2__CLASSD_R1>, + <PIN_PB3__CLASSD_R2>, + <PIN_PB4__CLASSD_R3>; + bias-pull-up; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; @@ -488,6 +496,14 @@ }; + classd: classd@fc048000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; + }; + can1: can@fc050000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_default>; @@ -504,7 +520,7 @@ bp1 { label = "PB_USER"; - gpios = <&pioA 41 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; linux,code = <0x104>; }; }; @@ -517,17 +533,18 @@ red { label = "red"; - gpios = <&pioA 38 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>; }; + green { label = "green"; - gpios = <&pioA 37 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>; }; blue { label = "blue"; - gpios = <&pioA 32 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index a4808c4fbc05..64fa3f9a39d3 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -455,6 +455,16 @@ >; /* shared pinctrl settings */ + ac97 { + pinctrl_ac97: ac97-0 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97RX */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97TX */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97FS */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* AC97CK */ + }; + }; + adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; @@ -1043,6 +1053,17 @@ status = "disabled"; }; + ac97: sound@fffac000 { + compatible = "atmel,at91sam9263-ac97c"; + reg = <0xfffac000 0x4000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ac97>; + clocks = <&ac97_clk>; + clock-names = "ac97_clk"; + status = "disabled"; + }; + adc0: adc@fffb0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 2522c3308305..94c52c555f83 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -166,6 +166,10 @@ status = "okay"; }; + ac97: sound@fffac000 { + status = "okay"; + }; + adc0: adc@fffb0000 { pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index bf8c83815753..7c957ea06c66 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -55,6 +55,11 @@ /include/ "bcm-cygnus-clock.dtsi" + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + }; + core { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x1000000>; @@ -119,6 +124,21 @@ compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x30>, <0x0301d24c 0x2c>; + + spi_0: spi_0 { + function = "spi0"; + groups = "spi0_grp"; + }; + + spi_1: spi_1 { + function = "spi1"; + groups = "spi1_grp"; + }; + + spi_2: spi_2 { + function = "spi2"; + groups = "spi2_grp"; + }; }; mailbox: mailbox@03024024 { @@ -300,6 +320,23 @@ }; }; + dma0: dma@18018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x18018000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb_clk>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + uart0: serial@18020000 { compatible = "snps,dw-apb-uart"; reg = <0x18020000 0x100>; @@ -324,7 +361,7 @@ uart2: serial@18022000 { compatible = "snps,dw-apb-uart"; - reg = <0x18020000 0x100>; + reg = <0x18022000 0x100>; reg-shift = <2>; reg-io-width = <4>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -344,6 +381,52 @@ status = "disabled"; }; + spi0: spi@18028000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x18028000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi_0>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + spi1: spi@18029000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x18029000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi_1>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + spi2: spi@1802a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1802a000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi_2>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + sdhci0: sdhci@18041000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18041000 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + status = "disabled"; + }; + eth0: ethernet@18042000 { compatible = "brcm,amac"; reg = <0x18042000 0x1000>, @@ -353,6 +436,16 @@ status = "disabled"; }; + sdhci1: sdhci@18043000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18043000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + status = "disabled"; + }; + nand: nand@18046000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x18046000 0x600>, <0xf8105408 0x600>, @@ -366,6 +459,33 @@ brcm,nand-has-wp; }; + ehci0: usb@18048000 { + compatible = "generic-ehci"; + reg = <0x18048000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ohci0: usb@18048800 { + compatible = "generic-ohci"; + reg = <0x18048800 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + v3d: v3d@180a2000 { + compatible = "brcm,cygnus-v3d"; + reg = <0x180a2000 0x1000>; + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + clock-names = "v3d_clk"; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vc4: gpu { + compatible = "brcm,cygnus-vc4"; + }; + gpio_asiu: gpio@180a5000 { compatible = "brcm,cygnus-asiu-gpio"; reg = <0x180a5000 0x668>; @@ -444,19 +564,6 @@ status = "disabled"; }; - v3d: v3d@180a2000 { - compatible = "brcm,cygnus-v3d"; - reg = <0x180a2000 0x1000>; - clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; - clock-names = "v3d_clk"; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - vc4: gpu { - compatible = "brcm,cygnus-vc4"; - }; - adc: adc@180a6000 { compatible = "brcm,iproc-static-adc"; #io-channel-cells = <1>; @@ -467,5 +574,19 @@ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + keypad: keypad@180ac000 { + compatible = "brcm,bcm-keypad"; + reg = <0x180ac000 0x14c>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>; + clock-names = "peri_clk"; + clock-frequency = <31250>; + pull-up-enabled; + col-debounce-filter-period = <0>; + status-debounce-filter-period = <0>; + row-output-enabled; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 7204d1def23d..dff66974feed 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -215,6 +215,7 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; sdhci,auto-cmd12; clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>; + dma-coherent; status = "disabled"; }; @@ -224,6 +225,7 @@ <0x110000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; status = "disabled"; }; @@ -233,6 +235,7 @@ <0x111000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; status = "disabled"; }; @@ -242,6 +245,7 @@ <0x112000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; status = "disabled"; }; @@ -252,6 +256,7 @@ #mbox-cells = <1>; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; + dma-coherent; }; nand: nand@26000 { @@ -297,6 +302,32 @@ #size-cells = <0>; }; + xhci: usb@29000 { + compatible = "generic-xhci"; + reg = <0x29000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb3-phy"; + dma-coherent; + status = "disabled"; + }; + + ehci0: usb@2a000 { + compatible = "generic-ehci"; + reg = <0x2a000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + }; + + ohci0: usb@2b000 { + compatible = "generic-ohci"; + reg = <0x2b000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + }; + crypto@2f000 { compatible = "brcm,spum-nsp-crypto"; reg = <0x2f000 0x900>; @@ -321,20 +352,6 @@ status = "disabled"; }; - ehci0: usb@2a000 { - compatible = "generic-ehci"; - reg = <0x2a000 0x100>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - ohci0: usb@2b000 { - compatible = "generic-ohci"; - reg = <0x2b000 0x100>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - rng: rng@33000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x33000 0x14>; @@ -376,6 +393,7 @@ #size-cells = <0>; interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; clock-frequency = <100000>; + dma-coherent; status = "disabled"; }; @@ -446,6 +464,7 @@ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + dma-coherent; status = "disabled"; sata0: sata-port@0 { @@ -460,6 +479,15 @@ phy-names = "sata-phy"; }; }; + + usb3_phy: usb3-phy@104000 { + compatible = "brcm,ns-bx-usb3-phy"; + reg = <0x104000 0x1000>, + <0x032000 0x1000>; + reg-names = "dmp", "ccb-mii"; + #phy-cells = <0>; + status = "disabled"; + }; }; pcie0: pcie@18012000 { @@ -483,6 +511,7 @@ */ ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + dma-coherent; status = "disabled"; msi-parent = <&msi0>; @@ -519,6 +548,7 @@ */ ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + dma-coherent; status = "disabled"; msi-parent = <&msi1>; @@ -555,6 +585,7 @@ */ ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + dma-coherent; status = "disabled"; msi-parent = <&msi2>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index d0704540db6b..9f866491efdf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -99,3 +99,9 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 46d078e29017..4b1af06c8dc0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -94,3 +94,9 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 432088ebb0a1..a846f1e781d8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -101,3 +101,9 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 4133bc2cd9be..e860964e39fa 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -94,3 +94,9 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 4d56fe3006b0..5d77f3f8c4c5 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -89,3 +89,9 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts new file mode 100644 index 000000000000..82651c3eb682 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; + model = "Raspberry Pi Zero W"; + + /* Needed by firmware to properly init UARTs */ + aliases { + uart0 = "/soc/serial@7e201000"; + uart1 = "/soc/serial@7e215040"; + serial0 = "/soc/serial@7e201000"; + serial1 = "/soc/serial@7e215040"; + }; + + leds { + act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wl_on>; + reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; + }; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "CAM_GPIO1", /* GPIO40 */ + "WL_ON", /* GPIO41 */ + "NC", /* GPIO42 */ + "WIFI_CLK", /* GPIO43 */ + "CAM_GPIO0", /* GPIO44 */ + "BT_ON", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED_N", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; + + wl_on: wl-on { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_GPIO_OUT>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; + +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 79a20d520931..70362405c595 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -103,3 +103,9 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index e55b362b9d6e..e36c392a2b8f 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -39,7 +39,7 @@ }; alt0: alt0 { - brcm,pins = <4 5 7 8 9 10 11 14 15>; + brcm,pins = <4 5 7 8 9 10 11>; brcm,function = <BCM2835_FSEL_ALT0>; }; }; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index bf19e8cfb9e6..e8de41444b68 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -39,3 +39,9 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index da3deeb42592..2c26d0be8b03 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -36,6 +36,7 @@ cpus: cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; v7_cpu0: cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index c72a27d908b6..20725ca487f3 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -1 +1,51 @@ -#include "arm64/broadcom/bcm2837-rpi-3-b.dts" +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model B"; + + memory { + reg = <0 0x40000000>; + }; + + leds { + act { + gpios = <&gpio 47 0>; + }; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; + status = "okay"; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index 2d5de6f0f78d..bc1cca5cf43c 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -30,6 +30,7 @@ cpus: cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit cpu0: cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 62e1427b3f10..8b64caabaad8 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -52,6 +52,10 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; }; power0 { diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index a5647efe4118..d7c34fa72b4b 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -48,6 +48,9 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; wireless { diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 19ee924d7d53..83a4c60bb431 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -42,16 +42,22 @@ usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + trigger-sources = <&xhci_port1>; + linux,default-trigger = "usbport"; }; usb3-green { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; wps { diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index a854a5174b7f..3ed8de42cb48 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -36,6 +36,8 @@ usb2-port1 { label = "bcm53xx:green:usb2-port1"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; power { @@ -67,6 +69,8 @@ usb2-port2 { label = "bcm53xx:green:usb2-port2"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index 97aa5d59a1d8..ec4a50e440f6 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -46,11 +46,16 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; wan-blue { diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 51b0641b5f79..7cc7d344fe5b 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -71,6 +71,9 @@ usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; 2ghz { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 5f8621d00c50..bc1d1e10d4ac 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -59,6 +59,9 @@ usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; status { diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 34417dac1cd0..19e61b5b066c 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -26,6 +26,8 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; wps { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 98647d22b291..045b9bb857f9 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -272,6 +272,19 @@ reg = <0x00021000 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ehci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; ohci: ohci@22000 { @@ -280,6 +293,19 @@ compatible = "generic-ohci"; reg = <0x00022000 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ohci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; }; @@ -300,6 +326,14 @@ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy>; phy-names = "usb"; + + #address-cells = <1>; + #size-cells = <0>; + + xhci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index eae623f76401..c698a565b8ae 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -138,10 +138,12 @@ ehci_port1: port@1 { reg = <1>; + #trigger-source-cells = <0>; }; ehci_port2: port@2 { reg = <2>; + #trigger-source-cells = <0>; }; }; @@ -158,10 +160,12 @@ ohci_port1: port@1 { reg = <1>; + #trigger-source-cells = <0>; }; ohci_port2: port@2 { reg = <2>; + #trigger-source-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 000f5f19215e..53f990defd6a 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -39,9 +39,12 @@ model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; compatible = "brcm,bcm11360", "brcm,cygnus"; + aliases { + serial0 = &uart3; + }; + chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; gpio_keys { diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts new file mode 100644 index 000000000000..ef263412fea5 --- /dev/null +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2017 Broadcom + * Author: Florian Fainelli <f.fainelli@gmail.com> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573"; + model = "Broadcom BCM947189ACDBMR"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + }; + + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 21 0>; + gpio-miso = <&chipcommon 22 0>; + gpio-mosi = <&chipcommon 23 0>; + cs-gpios = <&chipcommon 24 0>; + #address-cells = <1>; + #size-cells = <0>; + + /* External BCM6802 MoCA chip is connected */ + }; +}; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index f5c42962c201..f9dd342cc2ae 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -170,3 +170,11 @@ &uart0 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index efcb1f67bdad..374508a9cfbf 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -182,3 +182,11 @@ &uart0 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index b335ce02e32f..403250c5ad8e 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -202,3 +202,11 @@ &uart0 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 16ab2d82a14b..fd8b8c689ffe 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -219,3 +219,11 @@ &uart0 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 9b921c6aa8f8..3bc50849d013 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -227,3 +227,11 @@ &uart0 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 006b08e41a3b..d94d14b3c745 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -229,3 +229,11 @@ &uart0 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 64740f85cf4c..2cf2392483b2 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -264,3 +264,11 @@ &uart1 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 45983c04a8a7..413dbd5d9f64 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -249,6 +249,15 @@ 0x4c 0x00000080 0x000000f0 >; }; + + ev3_lcd_pins: pinmux_lcd { + pinctrl-single,bits = < + /* SIMO, GP2[11], GP2[12], CLK */ + 0x14 0x00188100 0x00ffff00 + /* GP5[0] */ + 0x30 0x80000000 0xf0000000 + >; + }; }; &pinconf { @@ -357,6 +366,21 @@ }; }; +&spi1 { + status = "okay"; + pinctrl-0 = <&ev3_lcd_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + + display@0{ + compatible = "lego,ev3-lcd"; + reg = <0>; + spi-max-frequency = <10000000>; + a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + }; +}; + &ehrpwm0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts index f5f59bb5a534..e88ff83f1dec 100644 --- a/arch/arm/boot/dts/dove-d3plug.dts +++ b/arch/arm/boot/dts/dove-d3plug.dts @@ -88,7 +88,7 @@ &pcie { status = "okay"; /* Fresco Logic USB3.0 xHCI controller */ - pcie-port@0 { + pcie@1 { status = "okay"; reset-gpios = <&gpio0 26 1>; reset-delay-us = <20000>; @@ -96,7 +96,7 @@ pinctrl-names = "default"; }; /* Mini-PCIe slot */ - pcie-port@1 { + pcie@2 { status = "okay"; reset-gpios = <&gpio0 25 1>; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 698d58cea20d..1475d3672e56 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -89,7 +89,7 @@ MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */ MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */ - pcie: pcie-controller { + pcie: pcie { compatible = "marvell,dove-pcie"; status = "disabled"; device_type = "pci"; @@ -106,7 +106,7 @@ 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */ 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */ - pcie0: pcie-port@0 { + pcie0: pcie@1 { device_type = "pci"; status = "disabled"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; @@ -118,13 +118,14 @@ #size-cells = <2>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 16>; }; - pcie1: pcie-port@1 { + pcie1: pcie@2 { device_type = "pci"; status = "disabled"; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; @@ -136,6 +137,7 @@ #size-cells = <2>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi new file mode 100644 index 000000000000..343e95f9a001 --- /dev/null +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -0,0 +1,258 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; + + leds { + compatible = "gpio-leds"; + led0 { + label = "dra7:usr1"; + gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led1 { + label = "dra7:usr2"; + gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "dra7:usr3"; + gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "dra7:usr4"; + gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + USER1 { + label = "btnUser1"; + linux,code = <BTN_0>; + gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; + }; + + USER2 { + label = "btnUser2"; + linux,code = <BTN_1>; + gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; +}; + +&mcspi1 { + status = "okay"; +}; + +&mcspi2 { + status = "okay"; +}; + +&uart1 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&qspi { + status = "okay"; + + spi-max-frequency = <76800000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <76800000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&usb1 { + dr_mode = "otg"; + extcon = <&extcon_usb1>; +}; + +&usb2 { + dr_mode = "host"; +}; + +&atl { + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index f47fc4daf062..aa426dabb6c3 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -8,9 +8,8 @@ /dts-v1/; #include "dra74x.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/ti-dra7-atl.h> -#include <dt-bindings/input/input.h> +#include "dra7-evm-common.dtsi" +#include "dra74x-mmc-iodelay.dtsi" / { model = "TI DRA742"; @@ -21,8 +20,12 @@ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; - chosen { - stdout-path = &uart1; + evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + vin-supply = <&smps9_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; evm_3v3_sd: fixedregulator-sd { @@ -51,11 +54,6 @@ regulator-max-microvolt = <1800000>; }; - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; - }; - extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; @@ -73,85 +71,6 @@ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; }; - sound0: sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "DRA7xx-EVM"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Line", "Line Out", - "Microphone", "Mic Jack", - "Line", "Line In"; - simple-audio-card,routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "MIC3L", "Mic Jack", - "MIC3R", "Mic Jack", - "Mic Jack", "Mic Bias", - "LINE1L", "Line In", - "LINE1R", "Line In"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound0_master>; - simple-audio-card,frame-master = <&sound0_master>; - simple-audio-card,bitclock-inversion; - - sound0_master: simple-audio-card,cpu { - sound-dai = <&mcasp3>; - system-clock-frequency = <5644800>; - }; - - simple-audio-card,codec { - sound-dai = <&tlv320aic3106>; - clocks = <&atl_clkin2_ck>; - }; - }; - - leds { - compatible = "gpio-leds"; - led0 { - label = "dra7:usr1"; - gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led1 { - label = "dra7:usr2"; - gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led2 { - label = "dra7:usr3"; - gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3 { - label = "dra7:usr4"; - gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - USER1 { - label = "btnUser1"; - linux,code = <BTN_0>; - gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; - }; - - USER2 { - label = "btnUser2"; - linux,code = <BTN_1>; - gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; - }; - }; }; &dra7_pmx_core { @@ -406,137 +325,49 @@ }; }; -&i2c3 { - status = "okay"; - clock-frequency = <400000>; -}; - -&mcspi1 { - status = "okay"; -}; - -&mcspi2 { - status = "okay"; -}; - -&uart1 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3e0>; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - &mmc1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; - vmmc_aux-supply = <&ldo1_reg>; + vqmmc-supply = <&ldo1_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode * is always hardwired. */ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; + pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; + pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; }; &mmc2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_default>; - vmmc-supply = <&evm_3v3_sw>; + vmmc-supply = <&evm_1v8_sw>; bus-width = <8>; + pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>; + pinctrl-3 = <&mmc2_pins_ddr_rev20>; + pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>; + pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; }; &cpu0 { cpu0-supply = <&smps123_reg>; }; -&qspi { - status = "okay"; - - spi-max-frequency = <76800000>; - m25p80@0 { - compatible = "s25fl256s1"; - spi-max-frequency = <76800000>; - reg = <0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - #address-cells = <1>; - #size-cells = <1>; - - /* MTD partition table. - * The ROM checks the first four physical blocks - * for a valid file to boot and the flash here is - * 64KiB block size. - */ - partition@0 { - label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; - }; - partition@1 { - label = "QSPI.SPL.backup1"; - reg = <0x00010000 0x00010000>; - }; - partition@2 { - label = "QSPI.SPL.backup2"; - reg = <0x00020000 0x00010000>; - }; - partition@3 { - label = "QSPI.SPL.backup3"; - reg = <0x00030000 0x00010000>; - }; - partition@4 { - label = "QSPI.u-boot"; - reg = <0x00040000 0x00100000>; - }; - partition@5 { - label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00080000>; - }; - partition@6 { - label = "QSPI.u-boot-env"; - reg = <0x001c0000 0x00010000>; - }; - partition@7 { - label = "QSPI.u-boot-env.backup1"; - reg = <0x001d0000 0x0010000>; - }; - partition@8 { - label = "QSPI.kernel"; - reg = <0x001e0000 0x0800000>; - }; - partition@9 { - label = "QSPI.file-system"; - reg = <0x009e0000 0x01620000>; - }; - }; -}; - -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; -&usb1 { - dr_mode = "otg"; - extcon = <&extcon_usb1>; -}; - -&usb2 { - dr_mode = "host"; -}; - &elm { status = "okay"; }; @@ -556,6 +387,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -666,57 +498,6 @@ pinctrl-2 = <&dcan1_pins_default>; }; -&atl { - assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_gfclk_mux>, - <&dpll_abe_ck>, - <&dpll_abe_m2x2_ck>, - <&atl_clkin2_ck>; - assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; - assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; - - status = "okay"; - - atl2 { - bws = <DRA7_ATL_WS_MCASP2_FSX>; - aws = <DRA7_ATL_WS_MCASP3_FSX>; - }; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&atl_clkin2_ck>; - - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializer */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -&mailbox5 { +&pcie1_rc { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 0f0f6f58bd18..02a136a4661a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -196,6 +196,7 @@ scm_conf1: scm_conf@1c04 { compatible = "syscon"; reg = <0x1c04 0x0020>; + #syscon-cells = <2>; }; scm_conf_pcie: scm_conf@1c24 { @@ -287,7 +288,11 @@ #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; - pcie1: pcie@51000000 { + /** + * To enable PCI endpoint mode, disable the pcie1_rc + * node and enable pcie1_ep mode. + */ + pcie1_rc: pcie@51000000 { compatible = "ti,dra7-pcie"; reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; @@ -309,12 +314,28 @@ <0 0 0 2 &pcie1_intc 2>, <0 0 0 3 &pcie1_intc 3>, <0 0 0 4 &pcie1_intc 4>; + status = "disabled"; pcie1_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; }; }; + + pcie1_ep: pcie_ep@51000000 { + compatible = "ti,dra7-pcie-ep"; + reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; + reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; + interrupts = <0 232 0x4>; + num-lanes = <1>; + num-ib-windows = <4>; + num-ob-windows = <16>; + ti,hwmods = "pcie1"; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; + status = "disabled"; + }; }; axi@1 { @@ -418,6 +439,14 @@ reg = <0x40d00000 0x100>; }; + dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -1037,6 +1066,7 @@ dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; + max-frequency = <192000000>; }; mmc2: mmc@480b4000 { @@ -1048,6 +1078,7 @@ dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; status = "disabled"; + max-frequency = <192000000>; }; mmc3: mmc@480ad000 { @@ -1059,6 +1090,8 @@ dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; dma-names = "tx", "rx"; status = "disabled"; + /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ + max-frequency = <64000000>; }; mmc4: mmc@480d1000 { @@ -1070,6 +1103,7 @@ dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; dma-names = "tx", "rx"; status = "disabled"; + max-frequency = <192000000>; }; mmu0_dsp1: mmu@40d01000 { diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 9897e8fa6845..41c9132eb550 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -7,6 +7,7 @@ */ #include "dra72-evm-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h> / { @@ -32,6 +33,16 @@ 3000000 0x1>; }; + evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&lp8732_buck0_reg>; + regulator-always-on; + regulator-boot-on; + }; + poweroff: gpio-poweroff { compatible = "gpio-poweroff"; gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>; @@ -162,7 +173,24 @@ }; &mmc1 { - vmmc_aux-supply = <&vpo_sd_1v8_3v3>; + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; + vqmmc-supply = <&vpo_sd_1v8_3v3>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; + vmmc-supply = <&evm_1v8_sw>; }; &mac { diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 85780549bc26..2e485a13dfd7 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -311,6 +311,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -419,8 +420,6 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; - - vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; ti,non-removable; max-frequency = <192000000>; @@ -564,3 +563,7 @@ status = "okay"; }; }; + +&pcie1_rc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 6f9b6f31437e..bf588d00728d 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ #include "dra72-evm-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h> / { @@ -15,6 +16,16 @@ device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; + + evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&smps4_reg>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { @@ -84,3 +95,24 @@ ti,dp83867-rxctrl-strap-quirk; }; }; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; + vmmc-supply = <&evm_1v8_sw>; +}; diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index e6df676886c0..57bfe5caf5e4 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -146,5 +146,5 @@ }; &mmc1 { - vmmc_aux-supply = <&ldo1_reg>; + vqmmc-supply = <&ldo1_reg>; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index cd9c4ff12654..c572693b1665 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ #include "dra72-evm-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" / { model = "TI DRA722"; @@ -13,6 +14,16 @@ device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; + + evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&smps4_reg>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { @@ -43,3 +54,24 @@ phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev10>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev10>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>; + vmmc-supply = <&evm_1v8_sw>; +}; diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi new file mode 100644 index 000000000000..088013c6dc6e --- /dev/null +++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi @@ -0,0 +1,350 @@ +/* + * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs. + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Rules for modifying this file: + * a) Update of this file should typically correspond to a datamanual revision. + * Datamanual revision that was used should be updated in comment below. + * If there is no update to datamanual, do not update the values. If you + * need to use values different from that recommended by the datamanual + * for your design, then you should consider adding values to the device- + * -tree file for your board directly. + * b) We keep the mode names as close to the datamanual as possible. So + * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v, + * we follow that in code too. + * c) If the values change between multiple revisions of silicon, we add + * a revision tag to both the new and old entry. Use 'rev10' for PG 1.0, + * 'rev20' for PG 2.0 and so on. + * d) The node name and node label should be the exact same string. This is + * to curb naming creativity and achieve consistency. + * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and + * 'dra72_' tag to entries. Both the new and old entries should gain a tag. + * + * Datamanual Revisions: + * + * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017 + * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017 + * DRA71x : SPRS960B, Revised February 2017 + */ + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr12: mmc1_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_hs: mmc1_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr25: mmc1_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr50: mmc1_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_clk.mmc1_clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ + DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */ + >; + }; + + mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr104: mmc1_pins_sdr104 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs: mmc2_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + >; + }; + + mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs200: mmc2_pins_hs200 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&dra7_iodelay_core { + + /* Corresponds to MMC1_MANUAL1 in datamanual */ + mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */ + 0x624 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */ + 0x630 A_DELAY_PS(1375) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */ + 0x63C A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */ + 0x648 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */ + 0x654 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x620 A_DELAY_PS(1230) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x638 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x644 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x650 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x65C A_DELAY_PS(99) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + >; + }; + + /* Corresponds to MMC1_MANUAL2 in datamanual */ + mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(560) G_DELAY_PS(365) /* CFG_MMC1_CLK_OUT */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x638 A_DELAY_PS(29) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x650 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x65c A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + 0x628 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x634 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x640 A_DELAY_PS(433) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x64c A_DELAY_PS(287) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x658 A_DELAY_PS(351) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + >; + }; + + /* Corresponds to MMC1_MANUAL2 in datamanual */ + mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(520) G_DELAY_PS(320) /* CFG_MMC1_CLK_OUT */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x638 A_DELAY_PS(40) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x644 A_DELAY_PS(83) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x650 A_DELAY_PS(98) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x65c A_DELAY_PS(106) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + 0x628 A_DELAY_PS(51) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x640 A_DELAY_PS(363) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x64c A_DELAY_PS(199) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x658 A_DELAY_PS(273) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + >; + }; + + /* Corresponds to MMC2_MANUAL1 in datamanual */ + mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */ + 0x1a4 A_DELAY_PS(119) G_DELAY_PS(0) /* CFG_GPMC_A20_IN */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_IN */ + 0x1bc A_DELAY_PS(18) G_DELAY_PS(0) /* CFG_GPMC_A22_IN */ + 0x1c8 A_DELAY_PS(894) G_DELAY_PS(0) /* CFG_GPMC_A23_IN */ + 0x1d4 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_IN */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1ec A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */ + 0x1f8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_IN */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + 0x194 A_DELAY_PS(152) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1ac A_DELAY_PS(206) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b8 A_DELAY_PS(78) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c4 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(266) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f4 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x368 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + >; + }; + + /* Corresponds to MMC2_MANUAL3 in datamanual */ + mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf { + pinctrl-pin-array = < + 0x194 A_DELAY_PS(150) G_DELAY_PS(95) /* CFG_GPMC_A19_OUT */ + 0x1ac A_DELAY_PS(250) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b8 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c4 A_DELAY_PS(100) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(870) G_DELAY_PS(415) /* CFG_GPMC_A23_OUT */ + 0x1dc A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e8 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x368 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(695) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x1a8 A_DELAY_PS(924) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1b4 A_DELAY_PS(719) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1c0 A_DELAY_PS(824) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1d8 A_DELAY_PS(877) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1e4 A_DELAY_PS(446) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1f0 A_DELAY_PS(847) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1fc A_DELAY_PS(586) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x364 A_DELAY_PS(1039) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + >; + }; + + /* Corresponds to MMC2_MANUAL3 in datamanual */ + mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf { + pinctrl-pin-array = < + 0x194 A_DELAY_PS(285) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1ac A_DELAY_PS(189) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b8 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_OUT */ + 0x1c4 A_DELAY_PS(0) G_DELAY_PS(70) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(730) G_DELAY_PS(360) /* CFG_GPMC_A23_OUT */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f4 A_DELAY_PS(70) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x368 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x1a8 A_DELAY_PS(231) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1b4 A_DELAY_PS(39) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1c0 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1d8 A_DELAY_PS(176) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1f0 A_DELAY_PS(101) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x364 A_DELAY_PS(360) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + >; + }; +}; diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi new file mode 100644 index 000000000000..28ebb4eb884a --- /dev/null +++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi @@ -0,0 +1,647 @@ +/* + * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs. + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Rules for modifying this file: + * a) Update of this file should typically correspond to a datamanual revision. + * Datamanual revision that was used should be updated in comment below. + * If there is no update to datamanual, do not update the values. If you + * need to use values different from that recommended by the datamanual + * for your design, then you should consider adding values to the device- + * -tree file for your board directly. + * b) We keep the mode names as close to the datamanual as possible. So + * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v, + * we follow that in code too. + * c) If the values change between multiple revisions of silicon, we add + * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1, + * 'rev20' for PG 2.0 and so on. + * d) The node name and node label should be the exact same string. This is + * to curb naming creativity and achieve consistency. + * + * Datamanual Revisions: + * + * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016 + * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016 + * + */ + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr12: mmc1_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_hs: mmc1_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr25: mmc1_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr50: mmc1_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_ddr50: mmc1_pins_ddr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr104: mmc1_pins_sdr104 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs: mmc2_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs200: mmc2_pins_hs200 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc4_pins_default: mmc4_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; + + mmc4_pins_hs: mmc4_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; + + mmc3_pins_default: mmc3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_hs: mmc3_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_sdr12: mmc3_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_sdr25: mmc3_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_sdr50: mmc3_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc4_pins_sdr12: mmc4_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; + + mmc4_pins_sdr25: mmc4_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; +}; + +&dra7_iodelay_core { + + /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */ + mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(572) G_DELAY_PS(540) /* CFG_MMC1_CLK_IN */ + 0x620 A_DELAY_PS(1525) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x624 A_DELAY_PS(0) G_DELAY_PS(600) /* CFG_MMC1_CMD_IN */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(55) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x630 A_DELAY_PS(403) G_DELAY_PS(120) /* CFG_MMC1_DAT0_IN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x63c A_DELAY_PS(23) G_DELAY_PS(60) /* CFG_MMC1_DAT1_IN */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x648 A_DELAY_PS(25) G_DELAY_PS(60) /* CFG_MMC1_DAT2_IN */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */ + mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(1076) G_DELAY_PS(330) /* CFG_MMC1_CLK_IN */ + 0x620 A_DELAY_PS(1271) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x624 A_DELAY_PS(722) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x630 A_DELAY_PS(751) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(20) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x63C A_DELAY_PS(256) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x648 A_DELAY_PS(263) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */ + 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */ + mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(1063) G_DELAY_PS(17) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */ + mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(600) G_DELAY_PS(400) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ + mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf { + pinctrl-pin-array = < + 0x190 A_DELAY_PS(621) G_DELAY_PS(600) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(300) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(739) G_DELAY_PS(600) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(812) G_DELAY_PS(600) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(954) G_DELAY_PS(600) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(935) G_DELAY_PS(600) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(525) G_DELAY_PS(600) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(767) G_DELAY_PS(600) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(225) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(565) G_DELAY_PS(600) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(969) G_DELAY_PS(600) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(180) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ + mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf { + pinctrl-pin-array = < + 0x190 A_DELAY_PS(274) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(162) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(401) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(73) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(465) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(115) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(633) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(935) G_DELAY_PS(280) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(621) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(183) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(467) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(262) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(46) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(684) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */ + mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */ + 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */ + 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */ + 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */ + 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */ + 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */ + 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1ec A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A26_IN */ + 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */ + mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a4 A_DELAY_PS(274) G_DELAY_PS(240) /* CFG_GPMC_A20_IN */ + 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A21_IN */ + 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1bc A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A22_IN */ + 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1c8 A_DELAY_PS(514) G_DELAY_PS(360) /* CFG_GPMC_A23_IN */ + 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */ + 0x1d4 A_DELAY_PS(187) G_DELAY_PS(120) /* CFG_GPMC_A24_IN */ + 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1ec A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A26_IN */ + 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1f8 A_DELAY_PS(121) G_DELAY_PS(60) /* CFG_GPMC_A27_IN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL1 in datamanual */ + mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL1 in datamanual */ + mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(406) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(659) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(130) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(169) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(457) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC4_DS_MANUAL1 in datamanual */ + mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(96) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(582) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(391) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(561) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_DS_MANUAL1 in datamanual */ + mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_MANUAL1 in datamanual */ + mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(2651) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(1572) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(1913) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(1721) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(1891) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(1919) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_MANUAL1 in datamanual */ + mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; +}; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts new file mode 100644 index 000000000000..b024a65c6e27 --- /dev/null +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -0,0 +1,423 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra76x.dtsi" +#include "dra7-evm-common.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "TI DRA762 EVM"; + compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + vsys_12v0: fixedregulator-vsys12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "vsys_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of Cntlr B of TPS43351-Q1 on dra76-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vsys_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of Cntlr A of TPS43351-Q1 on dra76-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vio_3v3: fixedregulator-vio_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + vio_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "vio_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vio_3v3>; + enable-active-high; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + }; + + vio_1v8: fixedregulator-vio_1v8 { + compatible = "regulator-fixed"; + regulator-name = "vio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&smps5_reg>; + }; + + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&vio_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + ti,system-power-controller; + interrupt-controller; + #interrupt-cells = <2>; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + smps12-in-supply = <&vsys_3v3>; + smps3-in-supply = <&vsys_3v3>; + smps4-in-supply = <&vsys_3v3>; + smps5-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + ldo2-in-supply = <&vsys_3v3>; + ldo3-in-supply = <&vsys_5v0>; + ldo4-in-supply = <&vsys_5v0>; + ldo5-in-supply = <&vsys_3v3>; + + tps65917_regulators: regulators { + smps12_reg: smps12 { + /* VDD_DSPEVE */ + regulator-name = "smps12"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_CORE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDD_IVA */ + regulator-name = "smps4"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDDS1V8 */ + regulator-name = "smps5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> VDA_PHY1_1V8 */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-bypass; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> VDA_PHY2_1V8 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-bypass; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + /* VDA_USB_3V3 */ + regulator-name = "ldo3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDD_SDIO_DV */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; + }; + + lp87565: lp87565@60 { + compatible = "ti,lp87565-q1"; + reg = <0x60>; + + buck10-in-supply =<&vsys_3v3>; + buck23-in-supply =<&vsys_3v3>; + + regulators: regulators { + buck10_reg: buck10 { + /*VDD_MPU*/ + regulator-name = "buck10"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + buck23_reg: buck23 { + /* VDD_GPU*/ + regulator-name = "buck23"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + pcf_lcd: pcf8757@20 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + + pcf_gpio_21: pcf8757@21 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcf_hdmi: pcf8575@26 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; + + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vio_3v3>; + IOVDD-supply = <&vio_3v3>; + DRVDD-supply = <&vio_3v3>; + DVDD-supply = <&aic_dvdd>; + }; +}; + +&cpu0 { + vdd-supply = <&buck10_reg>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vio_3v3_sd>; + vmmc_aux-supply = <&ldo4_reg>; + bus-width = <4>; + /* + * SDCD signal is not being used here - using the fact that GPIO mode + * is always hardwired. + */ + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vio_1v8>; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; +}; + +/* No RTC on this device */ +&rtc { + status = "disabled"; +}; + +&mac { + status = "okay"; + + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + dp83867_0: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; + + dp83867_1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldo3_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo3_reg>; +}; + +&qspi { + spi-max-frequency = <96000000>; + m25p80@0 { + spi-max-frequency = <96000000>; + }; +}; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi new file mode 100644 index 000000000000..1c88c581ff18 --- /dev/null +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "dra74x.dtsi" + +/ { + compatible = "ti,dra762", "ti,dra7"; + +}; + +/* MCAN interrupts are hard-wired to irqs 67, 68 */ +&crossbar_mpu { + ti,irqs-skip = <10 67 68 133 139 140>; +}; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index 4bd2ee87124e..4cbfa09c6c4e 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -22,7 +22,6 @@ }; &mshc_2 { - num-slots = <1>; cap-sd-highspeed; disable-wp; vqmmc-supply = <&ldo3_reg>; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 59c89d7662a8..639c2e605f3c 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -304,7 +304,6 @@ }; &mshc_0 { - num-slots = <1>; non-removable; cap-mmc-highspeed; card-detect-delay = <200>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index accee81da266..bbdfcbc6e7d2 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -426,7 +426,6 @@ &mshc_0 { #address-cells = <1>; #size-cells = <0>; - num-slots = <1>; broken-cd; non-removable; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 443e0c98dc73..0b45467d77a8 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -220,21 +220,6 @@ samsung,pll-clock-frequency = <24000000>; status = "okay"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <250000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - panel@0 { compatible = "samsung,s6e63j0x03"; reg = <0>; @@ -264,12 +249,6 @@ vsync-len = <2>; }; }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; }; }; @@ -642,7 +621,6 @@ &mshc_0 { #address-cells = <1>; #size-cells = <0>; - num-slots = <1>; broken-cd; non-removable; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 645feffb9239..7b6ab7265110 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -202,21 +202,6 @@ samsung,pll-clock-frequency = <24000000>; status = "okay"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - panel@0 { reg = <0>; compatible = "samsung,s6e8aa0"; @@ -244,12 +229,6 @@ vsync-len = <2>; }; }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 4cd62487bb16..14ce2c69bc0b 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -466,7 +466,6 @@ pinctrl-names = "default"; status = "okay"; vmmc-supply = <&buck9_reg>; - num-slots = <1>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 219d587c5a85..102acd78be15 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -516,7 +516,6 @@ mmc-pwrseq = <&emmc_pwrseq>; status = "okay"; - num-slots = <1>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 7a83e2df18a6..8a89eb893d64 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -488,7 +488,6 @@ pinctrl-names = "default"; status = "okay"; - num-slots = <1>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 35e9b94b86b8..bceb919ac637 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -390,21 +390,6 @@ samsung,pll-clock-frequency = <24000000>; status = "okay"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - panel@0 { compatible = "samsung,s6e8aa0"; reg = <0>; @@ -432,12 +417,6 @@ vsync-len = <2>; }; }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; }; }; @@ -901,7 +880,6 @@ }; &mshc_0 { - num-slots = <1>; broken-cd; non-removable; card-detect-delay = <200>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 6a432460eb77..18a7f396ac5f 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -518,7 +518,6 @@ &mmc_0 { status = "okay"; - num-slots = <1>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -533,7 +532,6 @@ &mmc_2 { status = "okay"; - num-slots = <1>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 6632f657394e..062cba4c2c31 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -346,7 +346,6 @@ &mmc_0 { status = "okay"; - num-slots = <1>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -360,7 +359,6 @@ &mmc_2 { status = "okay"; - num-slots = <1>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index e1d293dbbe5d..8788880e459d 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -530,7 +530,6 @@ /* eMMC flash */ &mmc_0 { status = "okay"; - num-slots = <1>; non-removable; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -544,7 +543,6 @@ /* uSD card */ &mmc_2 { status = "okay"; - num-slots = <1>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -564,7 +562,6 @@ */ &mmc_3 { status = "okay"; - num-slots = <1>; non-removable; cap-sdio-irq; keep-power-in-suspend; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 95c3bcace9dc..d53bfcbeb39c 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -427,7 +427,6 @@ &mmc_0 { status = "okay"; - num-slots = <1>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -445,7 +444,6 @@ */ &mmc_1 { status = "okay"; - num-slots = <1>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index d0cc300cfb4b..73b7cdd5f522 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -67,7 +67,6 @@ &mmc_0 { status = "okay"; - num-slots = <1>; broken-cd; bypass-smu; cap-mmc-highspeed; @@ -83,7 +82,6 @@ &mmc_2 { status = "okay"; - num-slots = <1>; cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 6cc74d97daae..9cb7726ef8d0 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -41,7 +41,6 @@ &mmc_0 { status = "okay"; - num-slots = <1>; cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; @@ -53,7 +52,6 @@ &mmc_2 { status = "okay"; - num-slots = <1>; cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index f9a75bfd3f2b..683a4cfb4a23 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -699,7 +699,6 @@ /* eMMC flash */ &mmc_0 { status = "okay"; - num-slots = <1>; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; @@ -717,7 +716,6 @@ /* WiFi SDIO module */ &mmc_1 { status = "okay"; - num-slots = <1>; non-removable; cap-sdio-irq; keep-power-in-suspend; @@ -737,7 +735,6 @@ /* uSD card */ &mmc_2 { status = "okay"; - num-slots = <1>; cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index bc4954e69f7b..7a00be7ea6d7 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -317,6 +317,7 @@ phys = <&pcie_phy0>; ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 53>; @@ -339,6 +340,7 @@ phys = <&pcie_phy1>; ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 56>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 953dc8677dc8..b2b95ff205e8 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -667,7 +667,6 @@ /* eMMC flash */ &mmc_0 { status = "okay"; - num-slots = <1>; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; @@ -686,7 +685,6 @@ /* WiFi SDIO module */ &mmc_1 { status = "okay"; - num-slots = <1>; non-removable; cap-sdio-irq; keep-power-in-suspend; @@ -706,7 +704,6 @@ /* uSD card */ &mmc_2 { status = "okay"; - num-slots = <1>; cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts new file mode 100644 index 000000000000..e75e2d44371c --- /dev/null +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -0,0 +1,246 @@ +/* + * Device Tree file for D-Link DIR-685 Xtreme N Storage Router + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "D-Link DIR-685 Xtreme N Storage Router"; + compatible = "dlink,dir-685", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + /* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + stdout-path = "uart0:115200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button-esc { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_ESC>; + label = "reset"; + /* Collides with LPC_LAD[0], UART DCD, SSP 97RST */ + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + button-eject { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_EJECTCD>; + label = "unmount"; + /* Collides with LPC LFRAME, UART RTS, SSP TXD */ + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-wps { + label = "dir685:blue:WPS"; + /* Collides with ICE */ + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + /* + * These two LEDs are on the side of the device. + * For electrical reasons, both LEDs cannot be active + * at the same time so only blue or orange can on at + * one time. Enabling both makes the LED go dark. + * The LEDs both sit inside the unmount button and the + * label on the case says "unmount". + */ + led-blue-hd { + label = "dir685:blue:HD"; + /* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */ + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-orange-hd { + label = "dir685:orange:HD"; + /* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */ + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + /* + * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM. + * Since the platform has no temperature sensor, this is controlled + * from userspace by using the hard disks S.M.A.R.T. temperature + * sensor. It is turned on when the temperature exceeds 46 degrees + * and turned off when the temperatures goes below 41 degrees + * (celsius). + */ + gpio-fan { + compatible = "gpio-fan"; + /* Collides with IDE */ + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0>, <10000 1>; + #cooling-cells = <2>; + }; + + /* + * The touchpad input is connected to a GPIO bit-banged + * I2C bus. + */ + gpio-i2c { + compatible = "i2c-gpio"; + /* Collides with ICE */ + gpios = <&gpio0 5 0>, /* SDA */ + <&gpio0 6 0>; /* SCL */ + #address-cells = <1>; + #size-cells = <0>; + + touchkeys@26 { + compatible = "dlink,dir685-touchkeys"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + /* Collides with NAND flash */ + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 32MB of flash */ + reg = <0x30000000 0x02000000>; + + /* + * This "RedBoot" is the Storlink derivative. + */ + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + /* + * Between the boot loader and the rootfs is the kernel + * in a custom Storlink format flashed from the boot + * menu. The rootfs is in squashfs format. + */ + partition@1800c0 { + label = "rootfs"; + reg = <0x001800c0 0x01dbff40>; + read-only; + }; + partition@1f40000 { + label = "upgrade"; + reg = <0x01f40000 0x00040000>; + read-only; + }; + partition@1f80000 { + label = "rgdb"; + reg = <0x01f80000 0x00040000>; + read-only; + }; + /* + * This partition contains MAC addresses for WAN, + * WLAN and LAN, and the country code (for wireless + * I guess). + */ + partition@1fc0000 { + label = "nvram"; + reg = <0x01fc0000 0x00020000>; + read-only; + }; + partition@1fe0000 { + label = "LangPack"; + reg = <0x01fe0000 0x00020000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0bgrp cover line 5, 6 used by TK I2C + * gpio0bgrp cover line 7 used by WPS LED + * gpio0cgrp cover line 8, 13 used by keys + * and 11, 12 used by the HD LEDs + * gpio0egrp cover line 16 used by VDISP + * gpio0fgrp cover line 17 used by TK IRQ + * gpio0ggrp cover line 20 used by panel CS + * gpio0hgrp cover line 21,22 used by RTL8366RB + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0bgrp", + "gpio0cgrp", + "gpio0egrp", + "gpio0fgrp", + "gpio0ggrp", + "gpio0hgrp"; + }; + }; + /* + * gpio1bgrp cover line 5,8,7 used by panel SPI + * also line 6 used by the fan + * + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1bgrp"; + }; + }; + }; + }; + + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ata@63000000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 55f6a4f1f801..b4fc58c8cf8d 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -33,6 +33,7 @@ wakeup-source; linux,code = <KEY_SETUP>; label = "Backup button"; + /* Conflict with TVC */ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; }; button@31 { @@ -40,6 +41,7 @@ wakeup-source; linux,code = <KEY_RESTART>; label = "Softreset button"; + /* Conflict with TVC */ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; }; }; @@ -48,11 +50,13 @@ compatible = "gpio-leds"; led@28 { label = "nas4220b:orange:hdd"; + /* Conflict with TVC */ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; default-state = "on"; }; led@30 { label = "nas4220b:green:os"; + /* Conflict with TVC */ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; @@ -99,12 +103,32 @@ }; }; + syscon: syscon@40000000 { + pinctrl { + /* + * gpio1dgrp cover line 28-31 otherwise used + * by TVC. + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + }; + }; + sata: sata@46000000 { cortina,gemini-ata-muxmode = <0>; cortina,gemini-enable-sata-bridge; status = "okay"; }; + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + ata@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts index 7b920bfbda32..3613b264f45f 100644 --- a/arch/arm/boot/dts/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -33,6 +33,7 @@ wakeup-source; linux,code = <KEY_SETUP>; label = "Reset to defaults"; + /* Conflict with TVC */ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; }; }; @@ -42,12 +43,14 @@ led@7 { /* FIXME: add the LED color */ label = "rut1xx::gsm"; + /* Conflict with ICE */ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; default-state = "on"; }; led@31 { /* FIXME: add the LED color */ label = "rut1xx::power"; + /* Conflict with NAND CE0 */ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "heartbeat"; @@ -61,5 +64,41 @@ reg = <0x30000000 0x00800000>; /* TODO: add flash partitions here */ }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0bgrp cover line 7 used by GSM LED + * gpio0fgrp cover line 17 used by power LED + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0bgrp", + "gpio0fgrp"; + }; + }; + /* + * gpio1dgrp cover line 28-31 otherwise used + * by TVC. + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + }; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 4d200f0bcd45..7cfa9caf47d4 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -33,6 +33,7 @@ wakeup-source; linux,code = <KEY_SETUP>; label = "factory reset"; + /* Conflict with NAND flash */ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; }; @@ -41,12 +42,14 @@ compatible = "gpio-leds"; led@20 { label = "sq201:green:info"; + /* Conflict with parallel flash */ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led@31 { label = "sq201:green:usb"; + /* Conflict with parallel and NAND flash */ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "usb-host"; @@ -55,7 +58,15 @@ soc { flash@30000000 { - status = "okay"; + /* + * Flash access can be enabled, with the side effect + * of disabling access to GPIO LED on GPIO0[20] which + * reuse one of the parallel flash chip select lines. + * Also the default firmware on the machine has the + * problem that since it uses the flash, the two LEDS + * on the right become numb. + */ + /* status = "okay"; */ /* 16MB of flash */ reg = <0x30000000 0x01000000>; @@ -93,12 +104,35 @@ }; }; + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0fgrp cover line 18 used by reset button + * gpio0ggrp cover line 20 used by info LED + * gpio0kgrp cover line 31 used by USB LED + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0fgrp", + "gpio0ggrp", + "gpio0kgrp"; + }; + }; + }; + }; + sata: sata@46000000 { cortina,gemini-ata-muxmode = <0>; cortina,gemini-enable-sata-bridge; status = "okay"; }; + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + pci@50000000 { status = "okay"; interrupt-map-mask = <0xf800 0 0 7>; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index 63b756e3bf5a..38a49e750478 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -33,6 +33,7 @@ wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; + /* Conflict with ICE */ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; }; }; @@ -42,21 +43,25 @@ led@1 { label = "wbd111:red:L3"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@2 { label = "wbd111:green:L4"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@3 { label = "wbd111:red:L4"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@5 { label = "wbd111:green:L3"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; @@ -98,5 +103,26 @@ read-only; }; }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", + "gpio0bgrp"; + }; + }; + }; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index 9747f5a47807..f77e34e0df0b 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -33,6 +33,7 @@ wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; + /* Conflict with ICE */ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; }; }; @@ -42,21 +43,25 @@ led@1 { label = "wbd111:red:L3"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@2 { label = "wbd111:green:L4"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@3 { label = "wbd111:red:L4"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led@5 { label = "wbd111:green:L3"; + /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; @@ -98,5 +103,26 @@ read-only; }; }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", + "gpio0bgrp"; + }; + }; + }; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; }; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 141d8d3a1d07..c68e8d430234 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -5,6 +5,8 @@ /include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/cortina,gemini-clock.h> +#include <dt-bindings/reset/cortina,gemini-reset.h> #include <dt-bindings/gpio/gpio.h> / { @@ -18,6 +20,8 @@ flash@30000000 { compatible = "cortina,gemini-flash", "cfi-flash"; syscon = <&syscon>; + pinctrl-names = "default"; + pinctrl-0 = <&pflash_default_pins>; bank-width = <2>; #address-cells = <1>; #size-cells = <1>; @@ -39,22 +43,123 @@ /* RESET_GLOBAL | RESET_CPU1 */ mask = <0xC0000000>; }; + + pinctrl { + compatible = "cortina,gemini-pinctrl"; + regmap = <&syscon>; + /* Hog the DRAM pins */ + pinctrl-names = "default"; + pinctrl-0 = <&dram_default_pins>, <&system_default_pins>, + <&vcontrol_default_pins>; + + dram_default_pins: pinctrl-dram { + mux { + function = "dram"; + groups = "dramgrp"; + }; + }; + rtc_default_pins: pinctrl-rtc { + mux { + function = "rtc"; + groups = "rtcgrp"; + }; + }; + power_default_pins: pinctrl-power { + mux { + function = "power"; + groups = "powergrp"; + }; + }; + cir_default_pins: pinctrl-cir { + mux { + function = "cir"; + groups = "cirgrp"; + }; + }; + system_default_pins: pinctrl-system { + mux { + function = "system"; + groups = "systemgrp"; + }; + }; + vcontrol_default_pins: pinctrl-vcontrol { + mux { + function = "vcontrol"; + groups = "vcontrolgrp"; + }; + }; + ice_default_pins: pinctrl-ice { + mux { + function = "ice"; + groups = "icegrp"; + }; + }; + uart_default_pins: pinctrl-uart { + mux { + function = "uart"; + groups = "uartrxtxgrp"; + }; + }; + pflash_default_pins: pinctrl-pflash { + mux { + function = "pflash"; + groups = "pflashgrp"; + }; + }; + usb_default_pins: pinctrl-usb { + mux { + function = "usb"; + groups = "usbgrp"; + }; + }; + gmii_default_pins: pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmiigrp"; + }; + }; + pci_default_pins: pinctrl-pci { + mux { + function = "pci"; + groups = "pcigrp"; + }; + }; + sata_default_pins: pinctrl-sata { + mux { + function = "sata"; + groups = "satagrp"; + }; + }; + /* Activate both groups of pins for this state */ + sata_and_ide_pins: pinctrl-sata-ide { + mux0 { + function = "sata"; + groups = "satagrp"; + }; + mux1 { + function = "ide"; + groups = "idegrp"; + }; + }; + }; }; watchdog@41000000 { compatible = "cortina,gemini-watchdog"; reg = <0x41000000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon 23>; - clocks = <&syscon 2>; + resets = <&syscon GEMINI_RESET_WDOG>; + clocks = <&syscon GEMINI_CLK_APB>; }; uart0: serial@42000000 { compatible = "ns16550a"; reg = <0x42000000 0x100>; - resets = <&syscon 18>; - clocks = <&syscon 6>; + resets = <&syscon GEMINI_RESET_UART>; + clocks = <&syscon GEMINI_CLK_UART>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart_default_pins>; reg-shift = <2>; }; @@ -65,9 +170,9 @@ interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ - resets = <&syscon 17>; + resets = <&syscon GEMINI_RESET_TIMER>; /* APB clock or RTC clock */ - clocks = <&syscon 2>, <&syscon 0>; + clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>; clock-names = "PCLK", "EXTCLK"; syscon = <&syscon>; }; @@ -76,20 +181,30 @@ compatible = "cortina,gemini-rtc"; reg = <0x45000000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon 16>; - clocks = <&syscon 2>, <&syscon 0>; + resets = <&syscon GEMINI_RESET_RTC>; + clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>; clock-names = "PCLK", "EXTCLK"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_default_pins>; }; sata: sata@46000000 { compatible = "cortina,gemini-sata-bridge"; reg = <0x46000000 0x100>; - resets = <&syscon 26>, - <&syscon 27>; + resets = <&syscon GEMINI_RESET_SATA0>, + <&syscon GEMINI_RESET_SATA1>; reset-names = "sata0", "sata1"; - clocks = <&syscon 10>, - <&syscon 11>; + clocks = <&syscon GEMINI_CLK_GATE_SATA0>, + <&syscon GEMINI_CLK_GATE_SATA1>; clock-names = "SATA0_PCLK", "SATA1_PCLK"; + /* + * This defines the special "ide" state that needs + * to be explicitly enabled to enable the IDE pins, + * as these pins are normally used for other things. + */ + pinctrl-names = "default", "ide"; + pinctrl-0 = <&sata_default_pins>; + pinctrl-1 = <&sata_and_ide_pins>; syscon = <&syscon>; status = "disabled"; }; @@ -97,7 +212,7 @@ intcon: interrupt-controller@48000000 { compatible = "faraday,ftintc010"; reg = <0x48000000 0x1000>; - resets = <&syscon 14>; + resets = <&syscon GEMINI_RESET_INTCON0>; interrupt-controller; #interrupt-cells = <2>; }; @@ -106,14 +221,16 @@ compatible = "cortina,gemini-power-controller"; reg = <0x4b000000 0x100>; interrupts = <26 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&power_default_pins>; }; gpio0: gpio@4d000000 { compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4d000000 0x100>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon 20>; - clocks = <&syscon 2>; + resets = <&syscon GEMINI_RESET_GPIO0>; + clocks = <&syscon GEMINI_CLK_APB>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -124,8 +241,8 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4e000000 0x100>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon 21>; - clocks = <&syscon 2>; + resets = <&syscon GEMINI_RESET_GPIO1>; + clocks = <&syscon GEMINI_CLK_APB>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -136,8 +253,8 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4f000000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon 22>; - clocks = <&syscon 2>; + resets = <&syscon GEMINI_RESET_GPIO2>; + clocks = <&syscon GEMINI_CLK_APB>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -151,9 +268,11 @@ * to configure the host bridge. */ reg = <0x50000000 0x100>; - resets = <&syscon 7>; - clocks = <&syscon 15>, <&syscon 4>; + resets = <&syscon GEMINI_RESET_PCI>; + clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>; clock-names = "PCLK", "PCICLK"; + pinctrl-names = "default"; + pinctrl-0 = <&pci_default_pins>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -193,8 +312,8 @@ compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; - resets = <&syscon 2>; - clocks = <&syscon 14>; + resets = <&syscon GEMINI_RESET_IDE>; + clocks = <&syscon GEMINI_CLK_GATE_IDE>; clock-names = "PCLK"; sata = <&sata>; status = "disabled"; @@ -204,8 +323,8 @@ compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; - resets = <&syscon 2>; - clocks = <&syscon 14>; + resets = <&syscon GEMINI_RESET_IDE>; + clocks = <&syscon GEMINI_CLK_GATE_IDE>; clock-names = "PCLK"; sata = <&sata>; status = "disabled"; @@ -217,8 +336,8 @@ arm,primecell-periphid = <0x0003b080>; reg = <0x67000000 0x1000>; interrupts = <9 IRQ_TYPE_EDGE_RISING>; - resets = <&syscon 10>; - clocks = <&syscon 1>; + resets = <&syscon GEMINI_RESET_DMAC>; + clocks = <&syscon GEMINI_CLK_AHB>; clock-names = "apb_pclk"; /* Bus interface AHB1 (AHB0) is totally tilted */ lli-bus-interface-ahb2; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 0ade3619f3c3..09ce8b81fafa 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -452,6 +452,13 @@ interrupt-names = "scm", "smn"; }; + rngb: rngb@53fb0000 { + compatible = "fsl,imx25-rngb"; + reg = <0x53fb0000 0x4000>; + clocks = <&clks 109>; + interrupts = <22>; + }; + esdhc1: esdhc@53fb4000 { compatible = "fsl,imx25-esdhc"; reg = <0x53fb4000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts new file mode 100644 index 000000000000..4f54fd4418a3 --- /dev/null +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -0,0 +1,297 @@ +/* + * Copyright 2017 Beckhoff Automation GmbH & Co. KG + * based on imx53-qsb.dts + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx53.dtsi" + +/ { + model = "Beckhoff CX9020 Embedded PC"; + compatible = "bhf,cx9020", "fsl,imx53"; + + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; + }; + + display-0 { + #address-cells =<1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp0>; + + port@0 { + reg = <0>; + + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display0_out: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; + }; + + dvi-connector { + compatible = "dvi-connector"; + ddc-i2c-bus = <&i2c2>; + digital; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + dvi-converter { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tfp410"; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&display0_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr-r { + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + pwr-g { + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + pwr-b { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + sd1-b { + linux,default-trigger = "mmc0"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + }; + + sd2-b { + linux,default-trigger = "mmc1"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + }; + }; + + regulator-3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + + reg_usb_vbus: regulator-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,dte-mode; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_vbus>; + phy_type = "utmi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&vpu { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_CLKO 0x1c4 + MX53_PAD_GPIO_16__I2C3_SDA 0x1c4 + MX53_PAD_EIM_D22__GPIO3_22 0x1c4 + MX53_PAD_EIM_D23__GPIO3_23 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_GPIO_1__ESDHC1_CD 0x1c4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + MX53_PAD_GPIO_3__GPIO1_3 0x1c4 + >; + }; + + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + MX53_PAD_GPIO_4__ESDHC2_CD 0x1e4 + MX53_PAD_EIM_D20__GPIO3_20 0x1e4 + MX53_PAD_GPIO_8__GPIO1_8 0x1c4 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 + >; + }; + + pinctrl_ipu_disp0: ipudisp0grp { + fsl,pins = < + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 + MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x5 + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_EIM_D26__UART2_RXD_MUX 0x1e4 + MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4 + MX53_PAD_EIM_D28__UART2_RTS 0x1e4 + MX53_PAD_EIM_D29__UART2_CTS 0x1e4 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h index aec406bc65eb..59f9c29e3fe2 100644 --- a/arch/arm/boot/dts/imx53-pinfunc.h +++ b/arch/arm/boot/dts/imx53-pinfunc.h @@ -524,6 +524,7 @@ #define MX53_PAD_EIM_D25__UART1_DSR 0x140 0x488 0x000 0x7 0x0 #define MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x144 0x48c 0x000 0x0 0x0 #define MX53_PAD_EIM_D26__GPIO3_26 0x144 0x48c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D26__UART2_RXD_MUX 0x144 0x48c 0x880 0x2 0x0 #define MX53_PAD_EIM_D26__UART2_TXD_MUX 0x144 0x48c 0x000 0x2 0x0 #define MX53_PAD_EIM_D26__FIRI_RXD 0x144 0x48c 0x80c 0x3 0x0 #define MX53_PAD_EIM_D26__IPU_CSI0_D_1 0x144 0x48c 0x000 0x4 0x0 @@ -533,6 +534,7 @@ #define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0 #define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0 #define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1 +#define MX53_PAD_EIM_D27__UART2_TXD_MUX 0x148 0x490 0x000 0x2 0x0 #define MX53_PAD_EIM_D27__FIRI_TXD 0x148 0x490 0x000 0x3 0x0 #define MX53_PAD_EIM_D27__IPU_CSI0_D_0 0x148 0x490 0x000 0x4 0x0 #define MX53_PAD_EIM_D27__IPU_DI1_PIN13 0x148 0x490 0x000 0x5 0x0 @@ -541,6 +543,7 @@ #define MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x14c 0x494 0x000 0x0 0x0 #define MX53_PAD_EIM_D28__GPIO3_28 0x14c 0x494 0x000 0x1 0x0 #define MX53_PAD_EIM_D28__UART2_CTS 0x14c 0x494 0x000 0x2 0x0 +#define MX53_PAD_EIM_D28__UART2_RTS 0x14c 0x494 0x87c 0x2 0x0 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 0x14c 0x494 0x82c 0x3 0x1 #define MX53_PAD_EIM_D28__CSPI_MOSI 0x14c 0x494 0x788 0x4 0x1 #define MX53_PAD_EIM_D28__I2C1_SDA 0x14c 0x494 0x818 0x5 0x1 @@ -548,6 +551,7 @@ #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 0x14c 0x494 0x000 0x7 0x0 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x150 0x498 0x000 0x0 0x0 #define MX53_PAD_EIM_D29__GPIO3_29 0x150 0x498 0x000 0x1 0x0 +#define MX53_PAD_EIM_D29__UART2_CTS 0x150 0x498 0x000 0x2 0x0 #define MX53_PAD_EIM_D29__UART2_RTS 0x150 0x498 0x87c 0x2 0x1 #define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 0x150 0x498 0x000 0x3 0x0 #define MX53_PAD_EIM_D29__CSPI_SS0 0x150 0x498 0x78c 0x4 0x2 diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 2e516f4985e4..8bf0d89cdd35 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -433,6 +433,15 @@ clock-names = "ipg", "per"; }; + srtc: srtc@53fa4000 { + compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; + reg = <0x53fa4000 0x4000>; + interrupts = <24>; + interrupt-parent = <&tzic>; + clocks = <&clks IMX5_CLK_SRTC_GATE>; + clock-names = "ipg"; + }; + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts index a2e0b73fdd4a..5f9f8948100d 100644 --- a/arch/arm/boot/dts/imx6dl-gw52xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts @@ -17,3 +17,61 @@ model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX"; compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl"; }; + +&i2c3 { + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi1_mux: endpoint { + remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu1_csi1_from_ipu1_csi1_mux { + bus-width = <8>; +}; + +&ipu1_csi1_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi1_mux>; + bus-width = <8>; +}; + +&ipu1_csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi1>; +}; + +&iomuxc { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0 + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0 + >; + }; + + pinctrl_ipu1_csi1: ipu1_csi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0 + MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0 + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0 + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0 + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0 + MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts index 6844b708d2f8..9bfc620d37bd 100644 --- a/arch/arm/boot/dts/imx6dl-gw53xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts @@ -17,3 +17,61 @@ model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX"; compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl"; }; + +&i2c3 { + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi1_mux: endpoint { + remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu1_csi1_from_ipu1_csi1_mux { + bus-width = <8>; +}; + +&ipu1_csi1_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi1_mux>; + bus-width = <8>; +}; + +&ipu1_csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi1>; +}; + +&iomuxc { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0 + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0 + >; + }; + + pinctrl_ipu1_csi1: ipu1_csi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0 + MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0 + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0 + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0 + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0 + MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts index be915412f852..b909bdf9a2ef 100644 --- a/arch/arm/boot/dts/imx6dl-gw54xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts @@ -17,3 +17,61 @@ model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX"; compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl"; }; + +&i2c3 { + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi1_mux: endpoint { + remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu1_csi1_from_ipu1_csi1_mux { + bus-width = <8>; +}; + +&ipu1_csi1_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi1_mux>; + bus-width = <8>; +}; + +&ipu1_csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi1>; +}; + +&iomuxc { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0 + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0 + >; + }; + + pinctrl_ipu1_csi1: ipu1_csi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0 + MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0 + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0 + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0 + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0 + MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 29b45f2e64e0..275c6c05219d 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -101,6 +101,51 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = + "", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL", + "I2C3_SDA", "I2C4_SCL", + "I2C4_SDA", "", "", "", "", "", "", "", + "", "PWM3", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "USB_OTG_VBUS", "", + "UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "", "", "", "", "", "", + "GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "", + "CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO", + "CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27", + "CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31"; +}; + +&gpio5 { + gpio-line-names = + "", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06", + "GPIO5_07", + "GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO", + "CSPI2_CS0", "CSPI2_CLK", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio7 { + gpio-line-names = + "SD3_CD", "SD3_WP", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts new file mode 100644 index 000000000000..4bbfe3d61027 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -0,0 +1,278 @@ +/* + * Copyright 2014-2017 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board"; + compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q", + "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + i2c2 = &i2c2; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_pcie_switch: regulator-pcie-switch { + compatible = "regulator-fixed"; + regulator-name = "pcie_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100000>; + enable-active-high; + status = "okay"; + }; +}; + +&backlight { + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ +&i2c1 { + status = "okay"; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +/* + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) + */ +&i2c3 { + status = "okay"; +}; + +&ipu1_di1_disp1 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; +}; + +&pcie { + /* active-high meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; + vpcie-supply = <®_pcie_switch>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_otg_vbus { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sound_spdif { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +/* MMC1 */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* SD1 */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + /* + * Mux the Apalis GPIOs + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 + &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 + &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 + &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 + >; +}; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts new file mode 100644 index 000000000000..a35c7a54ad3b --- /dev/null +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -0,0 +1,291 @@ +/* + * Copyright 2014-2017 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1"; + compatible = "toradex,apalis_imx6q-ixora-v1.1", + "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", + "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + i2c2 = &i2c2; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + led4-green { + label = "LED_4_GREEN"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + led4-red { + label = "LED_4_RED"; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + led5-green { + label = "LED_5_GREEN"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + led5-red { + label = "LED_5_RED"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&backlight { + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +/* + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) + */ +&i2c3 { + status = "okay"; +}; + +&ipu1_di1_disp1 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; +}; + +&pcie { + /* active-high meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_otg_vbus { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sound_spdif { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +/* MMC1 */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + /* + * Mux the Apalis GPIOs + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 + &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 + &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 + &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 + >; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 88cc7f51a4e9..60d33e99de76 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2017 Toradex AG * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * @@ -55,13 +55,9 @@ "fsl,imx6q"; aliases { - i2c0 = &i2cddc; - i2c1 = &i2c1; + i2c0 = &i2c1; + i2c1 = &i2c3; i2c2 = &i2c2; - i2c3 = &i2c3; - }; - - aliases { rtc0 = &rtc_i2c; rtc1 = &snvs_rtc; }; @@ -164,15 +160,10 @@ }; &hdmi { - ddc-i2c-bus = <&i2cddc>; - status = "okay"; -}; - -&i2cddc { status = "okay"; }; -/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ +/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; @@ -188,6 +179,14 @@ }; }; +/* + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) + */ +&i2c3 { + status = "okay"; +}; + &ipu1_di1_disp1 { remote-endpoint = <&lcd_display_in>; }; @@ -268,16 +267,13 @@ /* SD1 */ &usdhc2 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sd_cd>; + pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; &iomuxc { - /* - * Mux the Apalis GPIOs - * GPIO5, 6 used by optional fusion_F0710A kernel module - */ + /* Mux the Apalis GPIOs */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 2c1e98e0cf7b..46bdc6722715 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -57,7 +57,7 @@ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, - <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>; + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index c90b26f00e24..1015e55ca8f7 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -111,6 +111,11 @@ }; &i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; + pca9547: mux@70 { compatible = "nxp,pca9547"; reg = <0x70>; @@ -261,6 +266,43 @@ }; }; +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; +}; + +&iomuxc { + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x1b0b0 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + >; + }; +}; + &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts index a12c47e5ee05..0b8ae007ad73 100644 --- a/arch/arm/boot/dts/imx6q-gw52xx.dts +++ b/arch/arm/boot/dts/imx6q-gw52xx.dts @@ -18,6 +18,64 @@ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q"; }; +&i2c3 { + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu2_csi1_from_ipu2_csi1_mux { + bus-width = <8>; +}; + +&ipu2_csi1_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu2_csi1_mux>; + bus-width = <8>; +}; + +&ipu2_csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu2_csi1>; +}; + +&iomuxc { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0 + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0 + >; + }; + + pinctrl_ipu2_csi1: ipu2_csi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0 + MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0 + MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0 + MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0 + MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0 + MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0 + >; + }; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts index d76aaa83dad0..a56ef77eff3f 100644 --- a/arch/arm/boot/dts/imx6q-gw53xx.dts +++ b/arch/arm/boot/dts/imx6q-gw53xx.dts @@ -18,6 +18,64 @@ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q"; }; +&i2c3 { + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu2_csi1_from_ipu2_csi1_mux { + bus-width = <8>; +}; + +&ipu2_csi1_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu2_csi1_mux>; + bus-width = <8>; +}; + +&ipu2_csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu2_csi1>; +}; + &sata { status = "okay"; }; + +&iomuxc { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0 + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0 + >; + }; + + pinctrl_ipu2_csi1: ipu2_csi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0 + MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0 + MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0 + MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0 + MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0 + MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts index 6e8f53e92a2d..56e5b5050fcf 100644 --- a/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -18,6 +18,64 @@ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; }; +&i2c3 { + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu2_csi1_from_ipu2_csi1_mux { + bus-width = <8>; +}; + +&ipu2_csi1_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu2_csi1_mux>; + bus-width = <8>; +}; + +&ipu2_csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu2_csi1>; +}; + &sata { status = "okay"; }; + +&iomuxc { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0 + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0 + >; + }; + + pinctrl_ipu2_csi1: ipu2_csi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0 + MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0 + MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0 + MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0 + MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0 + MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index ba01dd76d887..ea339fa58f4a 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2017 Toradex AG * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * @@ -56,18 +56,6 @@ status = "disabled"; }; - /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */ - i2cddc: i2c@0 { - compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c_ddc>; - gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */ - &gpio2 30 GPIO_ACTIVE_HIGH /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - status = "disabled"; - }; - reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "1P8V"; @@ -210,10 +198,13 @@ }; }; -/* - * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier - * board) - */ +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_ddc>; + status = "disabled"; +}; + +/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -374,7 +365,8 @@ }; /* - * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused) + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) */ &i2c3 { clock-frequency = <100000>; @@ -460,7 +452,7 @@ /* MMC1 */ &usdhc1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; vqmmc-supply = <®_3p3v>; bus-width = <8>; voltage-ranges = <3300 3300>; @@ -640,11 +632,10 @@ >; }; - pinctrl_i2c_ddc: gpioi2cddcgrp { + pinctrl_hdmi_ddc: hdmiddcgrp { fsl,pins = < - /* DDC bitbang */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 + MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1 >; }; @@ -912,7 +903,7 @@ >; }; - pinctrl_usdhc1: usdhc1grp { + pinctrl_usdhc1_4bit: usdhc1grp_4bit { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 @@ -920,6 +911,11 @@ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; + + pinctrl_usdhc1_8bit: usdhc1grp_8bit { + fsl,pins = < MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071 diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index e8c1edc82e6e..885556260bd0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -231,6 +231,37 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; + bus-width = <8>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &pcie { @@ -302,6 +333,13 @@ &iomuxc { imx6qdl-gw51xx { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 @@ -372,6 +410,22 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 91991d63a69c..115d706228ef 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -377,7 +377,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 5bc6ed1a5b35..24be7965056c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -368,7 +368,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 66fcf838e964..4594b2279169 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -416,7 +416,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index 57374dddf98d..1a0faa1a14c8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -261,6 +261,37 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + adv7180: camera@20 { + compatible = "adi,adv7180"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adv7180>; + reg = <0x20>; + powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; + bus-width = <8>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &pcie { @@ -340,6 +371,13 @@ }; &iomuxc { + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0 + >; + }; + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 @@ -387,6 +425,22 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index 5fab5be414fe..7ca291e9dbdb 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -184,7 +184,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index f22e5879340b..d309a4d0eb08 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -108,6 +108,18 @@ startup-delay-us = <70000>; enable-active-high; }; + + reg_usb_h1_vbus: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; gpio-keys { @@ -515,6 +527,12 @@ >; }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 @@ -629,6 +647,7 @@ }; &usbh1 { + vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index afe7449c47da..756c5054f047 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -123,6 +123,18 @@ regulator-max-microvolt = <2800000>; regulator-always-on; }; + + reg_usb_h1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; mipi_xclk: mipi_xclk { @@ -610,6 +622,12 @@ >; }; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 @@ -705,6 +723,7 @@ }; &usbh1 { + vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 5d94b5ee6aa0..eeb7679fd348 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -59,6 +59,14 @@ pinctrl-0 = <&pinctrl_mdio1>; gpios = <&gpio6 5 GPIO_ACTIVE_HIGH &gpio6 4 GPIO_ACTIVE_HIGH>; + + phy: ethernet-phy@0 { + pinctrl-0 = <&pinctrl_rmii_phy_irq>; + pinctrl-names = "default"; + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + }; }; reg_28p0v: regulator-28p0v { @@ -615,14 +623,106 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; + phy-handle = <&phy>; phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; phy-supply = <®_3p3v>; status = "okay"; - fixed-link { - speed = <100>; - full-duplex; + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_switch_irq>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "gigabit_proc"; + phy-handle = <&switchphy0>; + }; + + port@1 { + reg = <1>; + label = "netaux"; + phy-handle = <&switchphy1>; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "netright"; + phy-handle = <&switchphy3>; + }; + + port@4 { + reg = <4>; + label = "netleft"; + phy-handle = <&switchphy4>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switchphy0: switchphy@0 { + reg = <0>; + interrupt-parent = <&switch>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy1: switchphy@1 { + reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy2: switchphy@2 { + reg = <2>; + interrupt-parent = <&switch>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy3: switchphy@3 { + reg = <3>; + interrupt-parent = <&switch>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy4: switchphy@4 { + reg = <4>; + interrupt-parent = <&switch>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; }; }; @@ -840,6 +940,12 @@ >; }; + pinctrl_switch_irq: switchgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x4001b000 + >; + }; + pinctrl_tc358767: tc358767grp { fsl,pins = < MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index a9723b94bafa..8884b4a3cafb 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -769,6 +769,7 @@ compatible = "syscon-poweroff"; regmap = <&snvs>; offset = <0x38>; + value = <0x60>; mask = <0x60>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3243af4a9984..3f76f980947e 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -655,6 +655,7 @@ compatible = "syscon-poweroff"; regmap = <&snvs>; offset = <0x38>; + value = <0x60>; mask = <0x60>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f16b9df9d0c6..6c7eb54be9e2 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -710,6 +710,7 @@ compatible = "syscon-poweroff"; regmap = <&snvs>; offset = <0x38>; + value = <0x60>; mask = <0x60>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index d2be8aa3370b..9c23e017d86a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -22,7 +22,7 @@ reg = <0x80000000 0x20000000>; }; - backlight { + backlight_display: backlight-display { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -78,6 +78,17 @@ clocks = <&clks IMX6UL_CLK_SAI2>; }; }; + + panel { + compatible = "innolux,at043tn24"; + backlight = <&backlight_display>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &clks { @@ -139,31 +150,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; - display = <&display0>; status = "okay"; - display0: display { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing0 { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <8>; - hback-porch = <4>; - hsync-len = <41>; - vback-porch = <2>; - vfront-porch = <4>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -316,7 +307,6 @@ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 - MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 >; }; diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dts index eb94d956808b..571eea7f1c6b 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dtsi +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -40,11 +40,16 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +/dts-v1/; + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "imx6ul.dtsi" / { + model = "Engicam GEAM6UL Starter Kit"; + compatible = "engicam,imx6ul-geam", "fsl,imx6ul"; + memory { reg = <0x80000000 0x08000000>; }; @@ -87,18 +92,46 @@ regulator-always-on; regulator-boot-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ul-geam-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; }; &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; xceiver-supply = <®_3p3v>; + status = "okay"; }; &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; xceiver-supply = <®_3p3v>; + status = "okay"; }; &fec1 { @@ -144,6 +177,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6UL_CLK_OSC>; + clock-names = "mclk"; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; }; &i2c2 { @@ -158,6 +201,31 @@ pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <28000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <30>; + hback-porch = <30>; + hsync-len = <64>; + vback-porch = <5>; + vfront-porch = <5>; + vsync-len = <20>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; &pwm8 { @@ -178,6 +246,12 @@ status = "okay"; }; +&tsc { + measure-delay-time = <0x1ffff>; + pre-charge-time = <0x1fff>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi deleted file mode 100644 index 2beaab6e272e..000000000000 --- a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (C) 2016 Amarula Solutions B.V. - * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -&i2c1 { - stmpe811: gpio-expander@44 { - compatible = "st,stmpe811"; - reg = <0x44>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_stmpe>; - interrupt-parent = <&gpio1>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - - stmpe: touchscreen { - compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; - st,fraction-z = <7>; - st,i-drive = <1>; - }; - }; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat - &pinctrl_lcdif_ctrl>; - display = <&display0>; - status = "okay"; - - display0: display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <28000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <30>; - hback-porch = <30>; - hsync-len = <64>; - vback-porch = <5>; - vfront-porch = <5>; - vsync-len = <20>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&iomuxc { - pinctrl_lcdif_ctrl: lcdifctrlgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 - >; - }; - - pinctrl_lcdif_dat: lcdifdatgrp { - fsl,pins = < - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 - >; - }; - - pinctrl_stmpe: stmpegrp { - fsl,pins = < - MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts index 73a1d0f0b9d5..f5b422898e61 100644 --- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts +++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts @@ -43,7 +43,6 @@ /dts-v1/; #include "imx6ul-isiot.dtsi" -#include "imx6ul-isiot-common.dtsi" / { model = "Engicam Is.IoT MX6UL eMMC Starter kit"; diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts index da29a86eb6a8..de15e1c75dd1 100644 --- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts +++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts @@ -43,7 +43,6 @@ /dts-v1/; #include "imx6ul-isiot.dtsi" -#include "imx6ul-isiot-common.dtsi" / { model = "Engicam Is.IoT MX6UL NAND Starter kit"; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index ea30380ad7a4..950fb28b630a 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -69,6 +69,68 @@ 100>; default-brightness-level = <100>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ul-isiot-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; }; &i2c1 { @@ -76,6 +138,42 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6UL_CLK_OSC>; + clock-names = "mclk"; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; + + stmpe811: gpio-expander@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + stmpe: touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; }; &i2c2 { @@ -85,6 +183,38 @@ status = "okay"; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <28000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <30>; + hback-porch = <30>; + hsync-len = <64>; + vback-porch = <5>; + vfront-porch = <5>; + vsync-len = <20>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + &pwm8 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; @@ -115,6 +245,21 @@ }; &iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 @@ -129,6 +274,38 @@ >; }; + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + pinctrl_pwm8: pwm8grp { fsl,pins = < MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 @@ -145,6 +322,12 @@ >; }; + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts index ed1d891d6a89..1d863a16bcf0 100644 --- a/arch/arm/boot/dts/imx6ul-liteboard.dts +++ b/arch/arm/boot/dts/imx6ul-liteboard.dts @@ -124,6 +124,10 @@ }; }; +&snvs_poweroff { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 6da2b77edd46..f11a241a340d 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -614,6 +614,7 @@ compatible = "syscon-poweroff"; regmap = <&snvs>; offset = <0x38>; + value = <0x60>; mask = <0x60>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index d7753f79937a..0a3915868aa3 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -106,6 +106,15 @@ fsl,magic-packet; }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + fsl,use-minimum-ecc; + nand-on-flash-bbt; + nand-ecc-mode = "hw"; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 0a24d1bf3c39..44637cabcc56 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -117,6 +117,37 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <200000>; }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&extended_io 7 GPIO_ACTIVE_LOW>; + }; + + reg_can2_3v3: regulator-can2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can2-3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; + }; + + panel { + compatible = "innolux,at043tn24"; + pinctrl-0 = <&pinctrl_backlight>; + enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &adc1 { @@ -168,6 +199,7 @@ phy-mode = "rgmii"; phy-handle = <ðphy0>; fsl,magic-packet; + phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>; status = "okay"; mdio { @@ -197,6 +229,13 @@ status = "okay"; }; +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_3v3>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -285,8 +324,8 @@ }; vgen6_reg: vldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-always-on; }; }; @@ -322,31 +361,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif>; - display = <&display0>; status = "okay"; - display0: display { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing0 { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <8>; - hback-porch = <4>; - hsync-len = <41>; - vback-porch = <2>; - vfront-porch = <4>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -356,12 +375,6 @@ status = "okay"; }; -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -488,6 +501,20 @@ >; }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */ + >; + }; + + pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 @@ -701,9 +728,9 @@ >; }; - pinctrl_pwm1: pwm1grp { + pinctrl_backlight: backlightgrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0 >; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 4cf6c458b583..82ad26e766eb 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -540,6 +540,7 @@ compatible = "syscon-poweroff"; regmap = <&snvs>; offset = <0x38>; + value = <0x60>; mask = <0x60>; }; @@ -1021,5 +1022,36 @@ status = "disabled"; }; }; + + dma_apbh: dma-apbh@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: gpmi-nand@33002000{ + compatible = "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX7D_NAND_RAWNAND_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>; + }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index ae1ebe7ee021..f1f32c54e72f 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -16,6 +16,19 @@ compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison EVM"; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + status = "okay"; + }; + }; + soc { clocks { @@ -160,3 +173,8 @@ reg = <1>; }; }; + +&dsp0 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 0dd4cdd6d40c..819ab8345916 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -45,6 +45,10 @@ }; }; + aliases { + rproc0 = &dsp0; + }; + soc { /include/ "keystone-k2e-clocks.dtsi" @@ -114,6 +118,22 @@ gpio,syscon-dev = <&devctrl 0x240>; }; + dsp0: dsp@10800000 { + compatible = "ti,k2e-dsp"; + reg = <0x10800000 0x00080000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem0>; + ti,syscon-dev = <&devctrl 0x844>; + resets = <&pscrst 0>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + status = "disabled"; + }; + pcie1: pcie@21020000 { compatible = "ti,keystone-pcie","snps,dw-pcie"; clocks = <&clkpcie1>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 61883cb969d2..f462f1043531 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -25,6 +25,26 @@ reg = <0x00000008 0x00000000 0x00000000 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + status = "okay"; + }; + }; + + vcc3v3_dcin_reg: fixedregulator-vcc3v3-dcin { + compatible = "regulator-fixed"; + regulator-name = "mmc0_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &k2g_pinctrl { @@ -34,6 +54,33 @@ K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; + + mmc0_pins: pinmux_mmc0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat3.mmc0_dat3 */ + K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat2.mmc0_dat2 */ + K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat1.mmc0_dat1 */ + K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat0.mmc0_dat0 */ + K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_clk.mmc0_clk */ + K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_cmd.mmc0_cmd */ + K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc0_sdcd.gpio1_12 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat7.mmc1_dat7 */ + K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat6.mmc1_dat6 */ + K2G_CORE_IOPAD(0x10f4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat5.mmc1_dat5 */ + K2G_CORE_IOPAD(0x10f8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat4.mmc1_dat4 */ + K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */ + K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */ + K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */ + K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */ + K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */ + K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ + >; + }; }; &uart0 { @@ -41,3 +88,27 @@ pinctrl-0 = <&uart0_pins>; status = "okay"; }; + +&gpio1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&vcc3v3_dcin_reg>; + cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */ + status = "okay"; +}; + +&dsp0 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index d820d37b5148..78692745e0af 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -17,6 +17,19 @@ device_type = "memory"; reg = <0x00000008 0x00000000 0x00000000 0x20000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + status = "okay"; + }; + }; }; &k2g_pinctrl { @@ -33,3 +46,8 @@ pinctrl-0 = <&uart0_pins>; status = "okay"; }; + +&dsp0 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index a789f75a1ed5..826b286665e6 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/keystone.h> +#include <dt-bindings/gpio/gpio.h> / { compatible = "ti,k2g","ti,keystone"; @@ -27,6 +28,7 @@ aliases { serial0 = &uart0; + rproc0 = &dsp0; }; cpus { @@ -113,6 +115,24 @@ status = "disabled"; }; + dcan0: can@0260B200 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0260B200 0x200>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + power-domains = <&k2g_pds 0x0008>; + clocks = <&k2g_clks 0x0008 1>; + }; + + dcan1: can@0260B400 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0260B400 0x200>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + power-domains = <&k2g_pds 0x0009>; + clocks = <&k2g_clks 0x0009 1>; + }; + kirq0: keystone_irq@026202a0 { compatible = "ti,keystone-irq"; interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>; @@ -128,6 +148,22 @@ gpio,syscon-dev = <&devctrl 0x240>; }; + dsp0: dsp@10800000 { + compatible = "ti,k2g-dsp"; + reg = <0x10800000 0x00100000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + power-domains = <&k2g_pds 0x0046>; + ti,syscon-dev = <&devctrl 0x844>; + resets = <&k2g_reset 0x0046 0x1>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + status = "disabled"; + }; + msgmgr: msgmgr@02a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; @@ -139,5 +175,173 @@ interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; }; + + pmmc: pmmc@02921c00 { + compatible = "ti,k2g-sci"; + /* + * In case of rare platforms that does not use k2g as + * system master, use /delete-property/ + */ + ti,system-reboot-controller; + mbox-names = "rx", "tx"; + mboxes= <&msgmgr 5 2>, + <&msgmgr 0 0>; + reg-names = "debug_messages"; + reg = <0x02921c00 0x400>; + + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k2g_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k2g_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + gpio0: gpio@2603000 { + compatible = "ti,k2g-gpio", "ti,keystone-gpio"; + reg = <0x02603000 0x100>; + gpio-controller; + #gpio-cells = <2>; + + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001b 0x0>; + clock-names = "gpio"; + }; + + gpio1: gpio@260a000 { + compatible = "ti,k2g-gpio", "ti,keystone-gpio"; + reg = <0x0260a000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <68>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001c 0x0>; + clock-names = "gpio"; + }; + + edma0: edma@02700000 { + compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; + reg = <0x02700000 0x8000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; + + ti,edma-memcpy-channels = <32 33 34 35>; + + power-domains = <&k2g_pds 0x3f>; + }; + + edma0_tptc0: tptc@02760000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x02760000 0x400>; + power-domains = <&k2g_pds 0x3f>; + }; + + edma0_tptc1: tptc@02768000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x02768000 0x400>; + power-domains = <&k2g_pds 0x3f>; + }; + + edma1: edma@02728000 { + compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; + reg = <0x02728000 0x8000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <12 13 14 15>; + * for example. + */ + + power-domains = <&k2g_pds 0x4f>; + }; + + edma1_tptc0: tptc@027b0000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x027b0000 0x400>; + power-domains = <&k2g_pds 0x4f>; + }; + + edma1_tptc1: tptc@027b8000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x027b8000 0x400>; + power-domains = <&k2g_pds 0x4f>; + }; + + mmc0: mmc@23000000 { + compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + reg = <0x23000000 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; + dmas = <&edma1 24 0>, <&edma1 25 0>; + dma-names = "tx", "rx"; + bus-width = <4>; + ti,needs-special-reset; + no-1-8-v; + max-frequency = <96000000>; + power-domains = <&k2g_pds 0xb>; + clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>; + clock-names = "fck", "mmchsdb_fck"; + status = "disabled"; + }; + + mmc1: mmc@23100000 { + compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + reg = <0x23100000 0x400>; + interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>; + dmas = <&edma1 26 0>, <&edma1 27 0>; + dma-names = "tx", "rx"; + bus-width = <8>; + ti,needs-special-reset; + ti,non-removable; + max-frequency = <96000000>; + power-domains = <&k2g_pds 0xc>; + clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>; + clock-names = "fck", "mmchsdb_fck"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 2156ff92d08f..6dd13b98aaba 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -16,6 +16,19 @@ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking EVM"; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + status = "okay"; + }; + }; + soc { clocks { refclksys: refclksys { @@ -184,3 +197,43 @@ reg = <1>; }; }; + +&dsp0 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp1 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp2 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp3 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp4 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp5 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp6 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp7 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 69d449430511..31dc00e4e5fd 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -45,6 +45,17 @@ }; }; + aliases { + rproc0 = &dsp0; + rproc1 = &dsp1; + rproc2 = &dsp2; + rproc3 = &dsp3; + rproc4 = &dsp4; + rproc5 = &dsp5; + rproc6 = &dsp6; + rproc7 = &dsp7; + }; + soc { /include/ "keystone-k2hk-clocks.dtsi" @@ -134,6 +145,134 @@ gpio,syscon-dev = <&devctrl 0x25c>; }; + dsp0: dsp@10800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x10800000 0x00100000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem0>; + ti,syscon-dev = <&devctrl 0x40>; + resets = <&pscrst 0>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + status = "disabled"; + }; + + dsp1: dsp@11800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x11800000 0x00100000>, + <0x11e00000 0x00008000>, + <0x11f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem1>; + ti,syscon-dev = <&devctrl 0x44>; + resets = <&pscrst 1>; + interrupt-parent = <&kirq0>; + interrupts = <1 9>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio1 27 0>; + status = "disabled"; + }; + + dsp2: dsp@12800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x12800000 0x00100000>, + <0x12e00000 0x00008000>, + <0x12f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem2>; + ti,syscon-dev = <&devctrl 0x48>; + resets = <&pscrst 2>; + interrupt-parent = <&kirq0>; + interrupts = <2 10>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio2 27 0>; + status = "disabled"; + }; + + dsp3: dsp@13800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x13800000 0x00100000>, + <0x13e00000 0x00008000>, + <0x13f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem3>; + ti,syscon-dev = <&devctrl 0x4c>; + resets = <&pscrst 3>; + interrupt-parent = <&kirq0>; + interrupts = <3 11>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio3 27 0>; + status = "disabled"; + }; + + dsp4: dsp@14800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x14800000 0x00100000>, + <0x14e00000 0x00008000>, + <0x14f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem4>; + ti,syscon-dev = <&devctrl 0x50>; + resets = <&pscrst 4>; + interrupt-parent = <&kirq0>; + interrupts = <4 12>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio4 27 0>; + status = "disabled"; + }; + + dsp5: dsp@15800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x15800000 0x00100000>, + <0x15e00000 0x00008000>, + <0x15f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem5>; + ti,syscon-dev = <&devctrl 0x54>; + resets = <&pscrst 5>; + interrupt-parent = <&kirq0>; + interrupts = <5 13>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio5 27 0>; + status = "disabled"; + }; + + dsp6: dsp@16800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x16800000 0x00100000>, + <0x16e00000 0x00008000>, + <0x16f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem6>; + ti,syscon-dev = <&devctrl 0x58>; + resets = <&pscrst 6>; + interrupt-parent = <&kirq0>; + interrupts = <6 14>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio6 27 0>; + status = "disabled"; + }; + + dsp7: dsp@17800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x17800000 0x00100000>, + <0x17e00000 0x00008000>, + <0x17f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem7>; + ti,syscon-dev = <&devctrl 0x5c>; + resets = <&pscrst 7>; + interrupt-parent = <&kirq0>; + interrupts = <7 15>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio7 27 0>; + status = "disabled"; + }; + mdio: mdio@02090300 { compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 056b42f99d7a..528667618db4 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -16,6 +16,19 @@ compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone"; model = "Texas Instruments Keystone 2 Lamarr EVM"; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + status = "okay"; + }; + }; + soc { clocks { refclksys: refclksys { @@ -133,3 +146,23 @@ reg = <1>; }; }; + +&dsp0 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp1 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp2 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; + +&dsp3 { + memory-region = <&dsp_common_memory>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 148650406cf7..4431310bc922 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -33,6 +33,13 @@ }; }; + aliases { + rproc0 = &dsp0; + rproc1 = &dsp1; + rproc2 = &dsp2; + rproc3 = &dsp3; + }; + soc { /include/ "keystone-k2l-clocks.dtsi" @@ -268,6 +275,70 @@ gpio,syscon-dev = <&devctrl 0x24c>; }; + dsp0: dsp@10800000 { + compatible = "ti,k2l-dsp"; + reg = <0x10800000 0x00100000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem0>; + ti,syscon-dev = <&devctrl 0x844>; + resets = <&pscrst 0>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + status = "disabled"; + }; + + dsp1: dsp@11800000 { + compatible = "ti,k2l-dsp"; + reg = <0x11800000 0x00100000>, + <0x11e00000 0x00008000>, + <0x11f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem1>; + ti,syscon-dev = <&devctrl 0x848>; + resets = <&pscrst 1>; + interrupt-parent = <&kirq0>; + interrupts = <1 9>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio1 27 0>; + status = "disabled"; + }; + + dsp2: dsp@12800000 { + compatible = "ti,k2l-dsp"; + reg = <0x12800000 0x00100000>, + <0x12e00000 0x00008000>, + <0x12f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem2>; + ti,syscon-dev = <&devctrl 0x84c>; + resets = <&pscrst 2>; + interrupt-parent = <&kirq0>; + interrupts = <2 10>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio2 27 0>; + status = "disabled"; + }; + + dsp3: dsp@13800000 { + compatible = "ti,k2l-dsp"; + reg = <0x13800000 0x00100000>, + <0x13e00000 0x00008000>, + <0x13f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem3>; + ti,syscon-dev = <&devctrl 0x850>; + resets = <&pscrst 3>; + interrupt-parent = <&kirq0>; + interrupts = <3 11>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio3 27 0>; + status = "disabled"; + }; + mdio: mdio@26200f00 { compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index d573e03f3134..f003f3f1bd65 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -1,6 +1,6 @@ / { mbus@f1000000 { - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -24,6 +24,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 9>; marvell,pcie-port = <0>; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 748d0b62f233..47d4b3d3d9e9 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,6 +1,6 @@ / { mbus@f1000000 { - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -24,6 +24,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 9>; marvell,pcie-port = <0>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index bb63d2d50fc5..a13dad0a7c08 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,6 +1,6 @@ / { mbus@f1000000 { - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -28,6 +28,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 9>; marvell,pcie-port = <0>; @@ -45,6 +46,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 10>; marvell,pcie-port = <1>; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 720c210d491d..90d4d71b6683 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -1,6 +1,6 @@ / { mbus@f1000000 { - pciec: pcie-controller@82000000 { + pciec: pcie@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -24,6 +24,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 9>; marvell,pcie-port = <0>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 43e9364083de..b4575bbaf085 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -192,7 +192,7 @@ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins &mmc1_cd>; - cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */ + cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */ vmmc-supply = <&vmmc1>; bus-width = <4>; cap-power-off-card; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 15204e44161d..cd6ad072e72c 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -86,14 +86,14 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@84dc { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; reg = <0x84dc 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -108,6 +108,20 @@ status = "disabled"; }; + pwm_ab: pwm@8550 { + compatible = "amlogic,meson-pwm"; + reg = <0x8550 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@8650 { + compatible = "amlogic,meson-pwm"; + reg = <0x8650 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + saradc: adc@8680 { compatible = "amlogic,meson-saradc"; reg = <0x8680 0x34>; @@ -117,7 +131,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; reg = <0x8700 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -182,7 +196,7 @@ }; uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; reg = <0x4c0 0x18>; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -230,5 +244,13 @@ interrupt-names = "macirq"; status = "disabled"; }; + + ahb_sram: sram@d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + }; }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 8557b6117a4b..ef281d290052 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -70,9 +70,37 @@ }; }; + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + clk81: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <200000000>; }; }; /* end of / */ + + +&uart_AO { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_A { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index cada35828931..b98d44fde6b6 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -168,10 +168,18 @@ &cbus { clkc: clock-controller@4000 { #clock-cells = <1>; + #reset-cells = <1>; compatible = "amlogic,meson8-clkc"; reg = <0x8000 0x4>, <0x4000 0x460>; }; + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + reg = <0x86c0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -270,6 +278,14 @@ arm,filter-ranges = <0x100000 0xc0000000>; }; +&pwm_ab { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; +}; + +&pwm_cd { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; +}; + &saradc { compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 72e4f425f190..bc278da7df0d 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -119,6 +119,7 @@ &cbus { clkc: clock-controller@4000 { #clock-cells = <1>; + #reset-cells = <1>; compatible = "amlogic,meson8b-clkc"; reg = <0x8000 0x4>, <0x4000 0x460>; }; @@ -129,20 +130,6 @@ #reset-cells = <1>; }; - pwm_ab: pwm@8550 { - compatible = "amlogic,meson8b-pwm"; - reg = <0x8550 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@8650 { - compatible = "amlogic,meson8b-pwm"; - reg = <0x8650 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - pwm_ef: pwm@86c0 { compatible = "amlogic,meson8b-pwm"; reg = <0x86c0 0x10>; @@ -150,12 +137,6 @@ status = "disabled"; }; - wdt: watchdog@9900 { - compatible = "amlogic,meson8b-wdt"; - reg = <0x9900 0x8>; - interrupts = <0 0 1>; - }; - pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -193,6 +174,14 @@ arm,filter-ranges = <0x100000 0xc0000000>; }; +&pwm_ab { + compatible = "amlogic,meson8b-pwm"; +}; + +&pwm_cd { + compatible = "amlogic,meson8b-pwm"; +}; + &saradc { compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, @@ -242,3 +231,7 @@ clock-names = "usb_general", "usb"; resets = <&reset RESET_USB_OTG>; }; + +&wdt { + compatible = "amlogic,meson8b-wdt"; +}; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index 1eb5da1dc8f0..4d61e5b1334a 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -255,5 +255,6 @@ regulator-min-microvolt = <2775000>; regulator-max-microvolt = <2775000>; regulator-enable-ramp-delay = <1000>; + regulator-initial-mode = <0x00>; /* NORMAL */ }; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index f1efdc63656a..afe12e5b51f9 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -13,6 +13,7 @@ */ #include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -533,6 +534,7 @@ compatible = "mediatek,mt2701-smi-larb"; reg = <0 0x14010000 0 0x1000>; mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; clocks = <&mmsys CLK_MM_SMI_LARB0>, <&mmsys CLK_MM_SMI_LARB0>; clock-names = "apb", "smi"; @@ -549,6 +551,7 @@ compatible = "mediatek,mt2701-smi-larb"; reg = <0 0x15001000 0 0x1000>; mediatek,smi = <&smi_common>; + mediatek,larb-id = <2>; clocks = <&imgsys CLK_IMG_SMI_COMM>, <&imgsys CLK_IMG_SMI_COMM>; clock-names = "apb", "smi"; @@ -579,6 +582,7 @@ compatible = "mediatek,mt2701-smi-larb"; reg = <0 0x16010000 0 0x1000>; mediatek,smi = <&smi_common>; + mediatek,larb-id = <1>; clocks = <&vdecsys CLK_VDEC_CKGEN>, <&vdecsys CLK_VDEC_LARB>; clock-names = "apb", "smi"; @@ -591,12 +595,114 @@ #clock-cells = <1>; }; + usb0: usb@1a1c0000 { + compatible = "mediatek,mt8173-xhci"; + reg = <0 0x1a1c0000 0 0x1000>, + <0 0x1a1c4700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>; + clocks = <&hifsys CLK_HIFSYS_USB0PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "ref_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy0: usb-phy@1a1c4000 { + compatible = "mediatek,mt2701-u3phy"; + reg = <0 0x1a1c4000 0 0x0700>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port0: usb-phy@1a1c4800 { + reg = <0 0x1a1c4800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@1a1c4900 { + reg = <0 0x1a1c4900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + usb1: usb@1a240000 { + compatible = "mediatek,mt8173-xhci"; + reg = <0 0x1a240000 0 0x1000>, + <0 0x1a244700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>; + clocks = <&hifsys CLK_HIFSYS_USB1PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "ref_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy1: usb-phy@1a244000 { + compatible = "mediatek,mt2701-u3phy"; + reg = <0 0x1a244000 0 0x0700>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port1: usb-phy@1a244800 { + reg = <0 0x1a244800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port1: usb-phy@1a244900 { + reg = <0 0x1a244900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + ethsys: syscon@1b000000 { compatible = "mediatek,mt2701-ethsys", "syscon"; reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; }; + eth: ethernet@1b100000 { + compatible = "mediatek,mt2701-eth", "syscon"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP1>, + <ðsys CLK_ETHSYS_GP2>, + <&apmixedsys CLK_APMIXED_TRGPLL>; + clock-names = "ethif", "esw", "gp1", "gp2", "trgpll"; + resets = <ðsys MT2701_ETHSYS_FE_RST>, + <ðsys MT2701_ETHSYS_GMAC_RST>, + <ðsys MT2701_ETHSYS_PPE_RST>; + reset-names = "fe", "gmac", "ppe"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + mediatek,ethsys = <ðsys>; + mediatek,pctl = <&syscfg_pctl_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + bdpsys: syscon@1c000000 { compatible = "mediatek,mt2701-bdpsys", "syscon"; reg = <0 0x1c000000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi new file mode 100644 index 000000000000..7c783d6c750e --- /dev/null +++ b/arch/arm/boot/dts/mt6323.dtsi @@ -0,0 +1,241 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: John Crispin <john@phrozen.org> + * Sean Wang <sean.wang@mediatek.com> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&pwrap { + pmic: mt6323 { + compatible = "mediatek,mt6323"; + interrupt-parent = <&pio>; + interrupts = <150 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + mt6323regulator: mt6323regulator{ + compatible = "mediatek,mt6323-regulator"; + + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts deleted file mode 100644 index b60b41cad592..000000000000 --- a/arch/arm/boot/dts/mt7623-evb.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <john@phrozen.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/dts-v1/; -#include "mt7623.dtsi" - -/ { - model = "MediaTek MT7623 evaluation board"; - compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; - - chosen { - stdout-path = &uart2; - }; - - memory { - reg = <0 0x80000000 0 0x40000000>; - }; -}; - -&uart2 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index d81158b2b02f..ec8a07415cb3 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -21,36 +21,99 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/reset/mt2701-resets.h> +#include <dt-bindings/thermal/thermal.h> #include "skeleton64.dtsi" / { compatible = "mediatek,mt7623"; interrupt-parent = <&sysirq>; + cpu_opp_table: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-98000000 { + opp-hz = /bits/ 64 <98000000>; + opp-microvolt = <1050000>; + }; + + opp-198000000 { + opp-hz = /bits/ 64 <198000000>; + opp-microvolt = <1050000>; + }; + + opp-398000000 { + opp-hz = /bits/ 64 <398000000>; + opp-microvolt = <1050000>; + }; + + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1050000>; + }; + + opp-747500000 { + opp-hz = /bits/ 64 <747500000>; + opp-microvolt = <1050000>; + }; + + opp-1040000000 { + opp-hz = /bits/ 64 <1040000000>; + opp-microvolt = <1150000>; + }; + + opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1200000>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1300000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; enable-method = "mediatek,mt6589-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x0>; + clocks = <&infracfg CLK_INFRA_CPUSEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <7>; + clock-frequency = <1300000000>; }; - cpu@1 { + + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x1>; + operating-points-v2 = <&cpu_opp_table>; + clock-frequency = <1300000000>; }; - cpu@2 { + + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x2>; + operating-points-v2 = <&cpu_opp_table>; + clock-frequency = <1300000000>; }; - cpu@3 { + + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x3>; + operating-points-v2 = <&cpu_opp_table>; + clock-frequency = <1300000000>; }; }; @@ -74,6 +137,58 @@ clock-output-names = "clk26m"; }; + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&thermal 0>; + + trips { + cpu_passive: cpu_passive { + temperature = <47000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_active: cpu_active { + temperature = <67000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <87000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_crit { + temperature = <107000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_active>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map2 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupt-parent = <&gic>; @@ -172,7 +287,7 @@ clock-names = "spi", "wrap"; }; - cir: cir@0x10013000 { + cir: cir@10013000 { compatible = "mediatek,mt7623-cir"; reg = <0 0x10013000 0 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; @@ -193,7 +308,7 @@ efuse: efuse@10206000 { compatible = "mediatek,mt7623-efuse", "mediatek,mt8173-efuse"; - reg = <0 0x10206000 0 0x1000>; + reg = <0 0x10206000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; thermal_calibration_data: calib@424 { @@ -371,6 +486,31 @@ nvmem-cell-names = "calibration-data"; }; + nandc: nfi@1100d000 { + compatible = "mediatek,mt7623-nfc", + "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt7623-ecc", + "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + spi1: spi@11016000 { compatible = "mediatek,mt7623-spi", "mediatek,mt2701-spi"; @@ -399,31 +539,6 @@ status = "disabled"; }; - nandc: nfi@1100d000 { - compatible = "mediatek,mt7623-nfc", - "mediatek,mt2701-nfc"; - reg = <0 0x1100d000 0 0x1000>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - clocks = <&pericfg CLK_PERI_NFI>, - <&pericfg CLK_PERI_NFI_PAD>; - clock-names = "nfi_clk", "pad_clk"; - status = "disabled"; - ecc-engine = <&bch>; - #address-cells = <1>; - #size-cells = <0>; - }; - - bch: ecc@1100e000 { - compatible = "mediatek,mt7623-ecc", - "mediatek,mt2701-ecc"; - reg = <0 0x1100e000 0 0x1000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_NFI_ECC>; - clock-names = "nfiecc_clk"; - status = "disabled"; - }; - afe: audio-controller@11220000 { compatible = "mediatek,mt7623-audio", "mediatek,mt2701-audio"; @@ -538,13 +653,22 @@ compatible = "mediatek,mt7623-mmc", "mediatek,mt8135-mmc"; reg = <0 0x11240000 0 0x1000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_MSDC30_1>, <&topckgen CLK_TOP_MSDC30_1_SEL>; clock-names = "source", "hclk"; status = "disabled"; }; + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + usb1: usb@1a1c0000 { compatible = "mediatek,mt7623-xhci", "mediatek,mt8173-xhci"; @@ -561,7 +685,8 @@ }; u3phy1: usb-phy@1a1c4000 { - compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + compatible = "mediatek,mt7623-u3phy", + "mediatek,mt2701-u3phy"; reg = <0 0x1a1c4000 0 0x0700>; clocks = <&clk26m>; clock-names = "u3phya_ref"; @@ -599,7 +724,8 @@ }; u3phy2: usb-phy@1a244000 { - compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + compatible = "mediatek,mt7623-u3phy", + "mediatek,mt2701-u3phy"; reg = <0 0x1a244000 0 0x0700>; clocks = <&clk26m>; clock-names = "u3phya_ref"; @@ -621,15 +747,6 @@ }; }; - hifsys: syscon@1a000000 { - compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - ethsys: syscon@1b000000 { compatible = "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", @@ -639,7 +756,9 @@ }; eth: ethernet@1b100000 { - compatible = "mediatek,mt2701-eth", "syscon"; + compatible = "mediatek,mt7623-eth", + "mediatek,mt2701-eth", + "syscon"; reg = <0 0x1b100000 0 0x20000>; interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>, @@ -650,6 +769,10 @@ <ðsys CLK_ETHSYS_GP2>, <&apmixedsys CLK_APMIXED_TRGPLL>; clock-names = "ethif", "esw", "gp1", "gp2", "trgpll"; + resets = <ðsys MT2701_ETHSYS_FE_RST>, + <ðsys MT2701_ETHSYS_GMAC_RST>, + <ðsys MT2701_ETHSYS_PPE_RST>; + reset-names = "fe", "gmac", "ppe"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; mediatek,ethsys = <ðsys>; mediatek,pctl = <&syscfg_pctl_a>; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts new file mode 100644 index 000000000000..688a86378cee --- /dev/null +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -0,0 +1,487 @@ +/* + * Copyright 2017 Sean Wang <sean.wang@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "mt7623.dtsi" +#include "mt6323.dtsi" + +/ { + model = "Bananapi BPI-R2"; + compatible = "bananapi,bpi-r2", "mediatek,mt7623"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@1 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@2 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@3 { + proc-supply = <&mt6323_vproc_reg>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_a>; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 256 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 257 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_a>; + + blue { + label = "bpi-r2:pio:blue"; + gpios = <&pio 241 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green { + label = "bpi-r2:pio:green"; + gpios = <&pio 240 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red { + label = "bpi-r2:pio:red"; + gpios = <&pio 239 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&cir_pins_a>; + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7530"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + pinctrl-names = "default"; + reset-gpios = <&pio 33 0>; + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan0"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + vmmc-supply = <&mt6323_vemc3v3_reg>; + vqmmc-supply = <&mt6323_vio18_reg>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + cd-gpios = <&pio 261 0>; + vmmc-supply = <&mt6323_vmch_reg>; + vqmmc-supply = <&mt6323_vio18_reg>; +}; + +&pio { + cir_pins_a:cir@0 { + pins_cir { + pinmux = <MT7623_PIN_46_IR_FUNC_IR>; + bias-disable; + }; + }; + + i2c0_pins_a: i2c@0 { + pins_i2c0 { + pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>, + <MT7623_PIN_76_SCL0_FUNC_SCL0>; + bias-disable; + }; + }; + + i2c1_pins_a: i2c@1 { + pin_i2c1 { + pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>, + <MT7623_PIN_58_SCL1_FUNC_SCL1>; + bias-disable; + }; + }; + + i2s0_pins_a: i2s@0 { + pin_i2s0 { + pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>, + <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>, + <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>, + <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>, + <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>; + drive-strength = <MTK_DRIVE_12mA>; + bias-pull-down; + }; + }; + + i2s1_pins_a: i2s@1 { + pin_i2s1 { + pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>, + <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>, + <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>, + <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>, + <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>; + drive-strength = <MTK_DRIVE_12mA>; + bias-pull-down; + }; + }; + + key_pins_a: keys@0 { + pins_keys { + pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>, + <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ; + input-enable; + }; + }; + + led_pins_a: leds@0 { + pins_leds { + pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>, + <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>, + <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>; + }; + }; + + mmc0_pins_default: mmc0default { + pins_cmd_dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, + <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + pins_rst { + pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc0_pins_uhs: mmc0 { + pins_cmd_dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, + <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_rst { + pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1default { + pins_cmd_dat { + pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, + <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, + <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, + <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, + <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_4mA>; + }; + + pins_wp { + pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>; + input-enable; + bias-pull-up; + }; + + pins_insert { + pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>; + bias-pull-up; + }; + }; + + mmc1_pins_uhs: mmc1 { + pins_cmd_dat { + pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, + <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, + <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, + <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, + <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + pwm_pins_a: pwm@0 { + pins_pwm { + pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>, + <MT7623_PIN_204_PWM1_FUNC_PWM1>, + <MT7623_PIN_205_PWM2_FUNC_PWM2>, + <MT7623_PIN_206_PWM3_FUNC_PWM3>, + <MT7623_PIN_207_PWM4_FUNC_PWM4>; + }; + }; + + spi0_pins_a: spi@0 { + pins_spi { + pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>, + <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>, + <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>, + <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>; + bias-disable; + }; + }; + + uart0_pins_a: uart@0 { + pins_dat { + pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>, + <MT7623_PIN_80_UTXD0_FUNC_UTXD0>; + }; + }; + + uart1_pins_a: uart@1 { + pins_dat { + pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>, + <MT7623_PIN_82_UTXD1_FUNC_UTXD1>; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins_a>; + status = "okay"; +}; + +&pwrap { + mt6323 { + mt6323led: led { + compatible = "mediatek,mt6323-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "bpi-r2:isink:green"; + default-state = "off"; + }; + + led@1 { + reg = <1>; + label = "bpi-r2:isink:red"; + default-state = "off"; + }; + + led@2 { + reg = <2>; + label = "bpi-r2:isink:blue"; + default-state = "off"; + }; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + status = "disabled"; +}; + +&uart2 { + status = "okay"; +}; + +&usb1 { + vusb33-supply = <&mt6323_vusb_reg>; + status = "okay"; +}; + +&usb2 { + vusb33-supply = <&mt6323_vusb_reg>; + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts new file mode 100644 index 000000000000..17c578f0d261 --- /dev/null +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -0,0 +1,111 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: John Crispin <john@phrozen.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt7623n-rfb.dtsi" + +/ { + model = "MediaTek MT7623N NAND reference board"; + compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623"; +}; + +&bch { + status = "okay"; +}; + +&nandc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_default>; + + nand@0 { + reg = <0>; + spare_per_sector = <64>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <12>; + nand-ecc-step-size = <1024>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "preloader"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + + partition@C0000 { + label = "uboot-env"; + reg = <0xC0000 0x40000>; + }; + + partition@140000 { + label = "bootimg"; + reg = <0x140000 0x2000000>; + }; + + partition@2140000 { + label = "recovery"; + reg = <0x2140000 0x2000000>; + }; + + partition@4140000 { + label = "rootfs"; + reg = <0x4140000 0x1000000>; + }; + + partition@5140000 { + label = "usrdata"; + reg = <0x5140000 0x1000000>; + }; + }; + }; +}; + +&pio { + nand_pins_default: nanddefault { + pins_ale { + pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>, + <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up; + }; + + pins_we { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + }; +}; diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi new file mode 100644 index 000000000000..256c5fd947bf --- /dev/null +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: John Crispin <john@phrozen.org> + * Sean Wang <sean.wang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt7623.dtsi" +#include "mt6323.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + cpus { + cpu0 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu1 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu2 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu3 { + proc-supply = <&mt6323_vproc_reg>; + }; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; + + usb_p1_vbus: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&mmc0 { + vmmc-supply = <&mt6323_vemc3v3_reg>; + vqmmc-supply = <&mt6323_vio18_reg>; +}; + +&mmc1 { + vmmc-supply = <&mt6323_vmch_reg>; + vqmmc-supply = <&mt6323_vmc_reg>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb1 { + vbus-supply = <&usb_p1_vbus>; + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 673cee2234b2..683b96a8f73e 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -299,7 +299,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4be85ce59dd1..4d2eaf843fa9 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -283,7 +283,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 53ae04f9104d..3d293b345e99 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&wl12xx_vmmc2>; - vmmc_aux-supply = <&wl12xx_vaux2>; + vqmmc-supply = <&wl12xx_vaux2>; non-removable; bus-width = <4>; cap-power-off-card; diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 2294f5b0aa10..bdf4b7fdda39 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -69,7 +69,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&wl12xx_vmmc2>; - vmmc_aux-supply = <&wl12xx_vaux2>; + vqmmc-supply = <&wl12xx_vaux2>; non-removable; bus-width = <4>; cap-power-off-card; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 82aa9c4a0f1c..0c0bb1b01b0b 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -149,7 +149,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 2b1d6977a535..ff35803088e3 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -115,7 +115,7 @@ &mmc1 { interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 49f37084e435..26c20e1167b9 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -144,6 +144,15 @@ io-channel-names = "temp", "bsi", "vbat"; }; + rear_camera: camera@0 { + compatible = "linux,camera"; + + module { + model = "TCM8341MD"; + sensor = <&cam1>; + }; + }; + pwm9: dmtimer-pwm { compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; @@ -164,6 +173,31 @@ }; }; +&isp { + vdds_csib-supply = <&vaux2>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_pins>; + + ports { + port@1 { + reg = <1>; + + csi_isp: endpoint { + remote-endpoint = <&csi_cam1>; + bus-type = <3>; /* CCP2 */ + clock-lanes = <1>; + data-lanes = <0>; + lane-polarity = <0 0>; + clock-inv = <0>; + /* Select strobe = <1> for back camera, <0> for front camera */ + strobe = <1>; + crc = <0>; + }; + }; + }; +}; + &omap3_pmx_core { pinctrl-names = "default"; @@ -328,6 +362,22 @@ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ >; }; + + camera_pins: pinmux_camera { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ + OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */ + OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */ + >; + }; }; &i2c1 { @@ -726,6 +776,40 @@ st,max-limit-y = <32>; st,max-limit-z = <32>; }; + + cam1: camera@3e { + compatible = "toshiba,et8ek8"; + reg = <0x3e>; + + vana-supply = <&vaux4>; + + clocks = <&isp 0>; + clock-names = "extclk"; + clock-frequency = <9600000>; + + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ + + port { + csi_cam1: endpoint { + bus-type = <3>; /* CCP2 */ + strobe = <1>; + clock-inv = <0>; + crc = <1>; + + remote-endpoint = <&csi_isp>; + }; + }; + }; + + /* D/A converter for auto-focus */ + ad5820: dac@0c { + compatible = "adi,ad5820"; + reg = <0x0c>; + + VANA-supply = <&vaux4>; + + #io-channel-cells = <0>; + }; }; &mmc1 { @@ -733,6 +817,9 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; + /* For debugging, it is often good idea to remove this GPIO. + It means you can remove back cover (to reboot by removing + battery) and still use the MMC card. */ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; @@ -741,7 +828,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&vaux3>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; bus-width = <8>; non-removable; no-sdio; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index cd220342a805..f25e158e7163 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -181,7 +181,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&w3cbw003c_npoweron>; - vmmc_aux-supply = <&w3cbw003c_wifi_nreset>; + vqmmc-supply = <&w3cbw003c_wifi_nreset>; bus-width = <4>; cap-sdio-irq; non-removable; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 06ac0f80bcf0..9a601d15247b 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -223,7 +223,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 45e2ce0803de..96d0301a336a 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -174,7 +174,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index a3ff4933dbc1..bdaf30c8c405 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -713,14 +713,12 @@ usbhsohci: ohci@48064400 { compatible = "ti,ohci-omap3"; reg = <0x48064400 0x400>; - interrupt-parent = <&intc>; interrupts = <76>; }; usbhsehci: ehci@48064800 { compatible = "ti,ehci-omap"; reg = <0x48064800 0x400>; - interrupt-parent = <&intc>; interrupts = <77>; }; }; @@ -831,7 +829,6 @@ reg-names = "tx", "rx"; - interrupt-parent = <&intc>; interrupts = <67>, <68>; }; @@ -844,7 +841,6 @@ reg-names = "tx", "rx"; - interrupt-parent = <&intc>; interrupts = <69>, <70>; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index abd6921143be..908951eb5943 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -33,7 +33,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; + vqmmc-supply = <&vsim>; /* * S6-3 must be in ON position for 8 bit mode to function * Else, use 4 bit mode diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 10ca1c174995..8b93d37310f2 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -129,6 +129,34 @@ output-high; line-name = "touchscreen-reset"; }; + + pwm8: dmtimer-pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: dmtimer-pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; + }; &dsi1 { @@ -373,7 +401,7 @@ /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) >; @@ -488,6 +516,18 @@ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) >; }; + + vibrator_direction_pin: pinmux_vibrator_direction_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: pinmux_vibrator_enable_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; }; &uart3 { diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 1b825128a7b9..a9a584b5b955 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -100,7 +100,7 @@ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */ - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ >; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index edbc4090297d..2b48e51c372a 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -267,7 +267,7 @@ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts index b4d19a7ae393..3d3140fd9659 100644 --- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -10,7 +10,7 @@ /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index d728ec963111..280d92d42bf1 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -290,7 +290,7 @@ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi index 74940b6d7719..676d8dd0624a 100644 --- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -122,7 +122,7 @@ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 4caadb253249..7824b2631cb6 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -290,7 +290,7 @@ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ >; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 78397f66d0b2..552a5c4c5942 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -266,7 +266,7 @@ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */ + OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */ OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */ OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */ >; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index b9457dd21a69..e413b21ee331 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -20,27 +20,12 @@ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; compatible = "qcom,ipq4019"; - clocks { - xo: xo { - compatible = "fixed-clock"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; - }; - soc { - - - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <48000000>; + rng@22000 { + status = "ok"; }; - pinctrl@0x01000000 { + pinctrl@1000000 { serial_pins: serial_pinmux { mux { pins = "gpio60", "gpio61"; @@ -108,5 +93,13 @@ watchdog@b017000 { status = "ok"; }; + + wifi@a000000 { + status = "ok"; + }; + + wifi@a800000 { + status = "ok"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 4b7d97275c62..10d112a4078e 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -96,6 +96,21 @@ clock-frequency = <32768>; #clock-cells = <0>; }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <48000000>; }; soc { @@ -119,7 +134,15 @@ reg = <0x1800000 0x60000>; }; - tlmm: pinctrl@0x01000000 { + rng@22000 { + compatible = "qcom,prng"; + reg = <0x22000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + status = "disabled"; + }; + + tlmm: pinctrl@1000000 { compatible = "qcom,ipq4019-pinctrl"; reg = <0x01000000 0x300000>; gpio-controller; @@ -269,5 +292,89 @@ compatible = "qcom,pshold"; reg = <0x4ab000 0x4>; }; + + wifi0: wifi@a000000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa000000 0x200000>; + resets = <&gcc WIFI0_CPU_INIT_RESET>, + <&gcc WIFI0_RADIO_SRIF_RESET>, + <&gcc WIFI0_RADIO_WARM_RESET>, + <&gcc WIFI0_RADIO_COLD_RESET>, + <&gcc WIFI0_CORE_WARM_RESET>, + <&gcc WIFI0_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", "wifi_radio_srif", + "wifi_radio_warm", "wifi_radio_cold", + "wifi_core_warm", "wifi_core_cold"; + clocks = <&gcc GCC_WCSS2G_CLK>, + <&gcc GCC_WCSS2G_REF_CLK>, + <&gcc GCC_WCSS2G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_NONE>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7", + "msi8", "msi9", "msi10", "msi11", + "msi12", "msi13", "msi14", "msi15", + "legacy"; + status = "disabled"; + }; + + wifi1: wifi@a800000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa800000 0x200000>; + resets = <&gcc WIFI1_CPU_INIT_RESET>, + <&gcc WIFI1_RADIO_SRIF_RESET>, + <&gcc WIFI1_RADIO_WARM_RESET>, + <&gcc WIFI1_RADIO_COLD_RESET>, + <&gcc WIFI1_CORE_WARM_RESET>, + <&gcc WIFI1_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", "wifi_radio_srif", + "wifi_radio_warm", "wifi_radio_cold", + "wifi_core_warm", "wifi_core_cold"; + clocks = <&gcc GCC_WCSS5G_CLK>, + <&gcc GCC_WCSS5G_REF_CLK>, + <&gcc GCC_WCSS5G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 169 IRQ_TYPE_NONE>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7", + "msi8", "msi9", "msi10", "msi11", + "msi12", "msi13", "msi14", "msi15", + "legacy"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index c5ee68a3f7f5..a39207625354 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -779,7 +779,7 @@ }; replicator@fc31c000 { - compatible = "qcom,coresight-replicator1x", "arm,primecell"; + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0xfc31c000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 52a7b586bac7..cd4d5ff7749e 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -11,6 +11,8 @@ /dts-v1/; #include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { model = "Genmai"; @@ -34,6 +36,54 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led1 { + gpios = <&port4 10 GPIO_ACTIVE_LOW>; + }; + + led2 { + gpios = <&port4 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + + scif2_pins: serial2 { + /* P3_0 as TxD2; P3_2 as RxD2 */ + pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; + }; + + i2c2_pins: i2c2 { + /* RIIC2: P1_4 as SCL, P1_5 as SDA */ + pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + }; + + ether_pins: ether { + /* Ethernet on Ports 1,2,3,5 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL */ + <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ + <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ + <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */ + <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER */ + <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN */ + <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS */ + <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0 */ + <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1 */ + <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2 */ + <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3 */ + <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0 */ + <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1 */ + <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */ + <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */ + }; }; &extal_clk { @@ -52,12 +102,28 @@ status = "okay"; }; +ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; + + status = "okay"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c2 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + eeprom@50 { - compatible = "renesas,24c128"; + compatible = "renesas,24c128", "atmel,24c128"; reg = <0x50>; pagesize = <64>; }; @@ -68,6 +134,9 @@ }; &scif2 { + pinctrl-names = "default"; + pinctrl-0 = <&scif2_pins>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 72df20a04320..5dcaaf131d27 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -10,6 +10,8 @@ /dts-v1/; #include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { model = "RSKRZA1"; @@ -33,6 +35,15 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led0 { + gpios = <&port7 1 GPIO_ACTIVE_LOW>; + }; + }; }; &extal_clk { @@ -47,11 +58,57 @@ clock-frequency = <32768>; }; +&pinctrl { + + /* Serial Console */ + scif2_pins: serial2 { + pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */ + <RZA1_PINMUX(3, 2, 4)>; /* RxD2 */ + }; + + /* Ethernet */ + ether_pins: ether { + /* Ethernet on Ports 1,2,3,5 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>, /* ET_COL */ + <RZA1_PINMUX(5, 9, 2)>, /* ET_MDC */ + <RZA1_PINMUX(3, 3, 2)>, /* ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* ET_RXDV */ + <RZA1_PINMUX(2, 0, 2)>, /* ET_TXCLK */ + <RZA1_PINMUX(2, 1, 2)>, /* ET_TXER */ + <RZA1_PINMUX(2, 2, 2)>, /* ET_TXEN */ + <RZA1_PINMUX(2, 3, 2)>, /* ET_CRS */ + <RZA1_PINMUX(2, 4, 2)>, /* ET_TXD0 */ + <RZA1_PINMUX(2, 5, 2)>, /* ET_TXD1 */ + <RZA1_PINMUX(2, 6, 2)>, /* ET_TXD2 */ + <RZA1_PINMUX(2, 7, 2)>, /* ET_TXD3 */ + <RZA1_PINMUX(2, 8, 2)>, /* ET_RXD0 */ + <RZA1_PINMUX(2, 9, 2)>, /* ET_RXD1 */ + <RZA1_PINMUX(2, 10, 2)>, /* ET_RXD2 */ + <RZA1_PINMUX(2, 11, 2)>; /* ET_RXD3 */ + }; + + /* SDHI ch1 on CN1 */ + sdhi1_pins: sdhi1 { + pinmux = <RZA1_PINMUX(3, 8, 7)>, /* SD_CD_1 */ + <RZA1_PINMUX(3, 9, 7)>, /* SD_WP_1 */ + <RZA1_PINMUX(3, 10, 7)>, /* SD_D1_1 */ + <RZA1_PINMUX(3, 11, 7)>, /* SD_D0_1 */ + <RZA1_PINMUX(3, 12, 7)>, /* SD_CLK_1 */ + <RZA1_PINMUX(3, 13, 7)>, /* SD_CMD_1 */ + <RZA1_PINMUX(3, 14, 7)>, /* SD_D3_1 */ + <RZA1_PINMUX(3, 15, 7)>; /* SD_D2_1 */ + }; +}; + &mtu2 { status = "okay"; }; ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; status = "okay"; renesas,no-ether-link; phy-handle = <&phy0>; @@ -61,6 +118,8 @@ }; &sdhi1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; bus-width = <4>; status = "okay"; }; @@ -78,5 +137,7 @@ }; &scif2 { + pinctrl-names = "default"; + pinctrl-0 = <&scif2_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 5cf53e9943af..4ed12a4d9d51 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -207,6 +207,84 @@ }; }; + pinctrl: pin-controller@fcfe3000 { + compatible = "renesas,r7s72100-ports"; + + reg = <0xfcfe3000 0x4230>; + + port0: gpio-0 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 6>; + }; + + port1: gpio-1 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + port2: gpio-2 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + port3: gpio-3 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + port4: gpio-4 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + port5: gpio-5 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 80 11>; + }; + + port6: gpio-6 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + port7: gpio-7 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + port8: gpio-8 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + port9: gpio-9 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 144 8>; + }; + + port10: gpio-10 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 160 16>; + }; + + port11: gpio-11 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 176 16>; + }; + }; + scif0: serial@e8007000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007000 64>; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 9b54783cc2a5..081af0192851 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -17,9 +17,40 @@ aliases { serial0 = &scif0; + ethernet0 = &avb; + }; +}; + +&pfc { + scif0_pins: scif0 { + groups = "scif0_data_d"; + function = "scif0"; + }; + + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; }; }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + micrel,led-mode = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index 001ca9144f4b..ff7993818637 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -22,8 +22,34 @@ device_type = "memory"; reg = <2 0x00000000 0 0x20000000>; }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; }; &extal_clk { clock-frequency = <20000000>; }; + +&pfc { + mmcif0_pins: mmc { + groups = "mmc_data8_b", "mmc_ctrl"; + function = "mmc"; + }; +}; + +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index 3a22538208f2..3d918d106593 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for the SK-RZG1M board * - * Copyright (C) 2016 Cogent Embedded, Inc. + * Copyright (C) 2016-2017 Cogent Embedded, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -39,11 +39,34 @@ clock-frequency = <20000000>; }; +&pfc { + scif0_pins: scif0 { + groups = "scif0_data_d"; + function = "scif0"; + }; + + ether_pins: ether { + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; + }; + + phy1_pins: phy1 { + groups = "intc_irq0"; + function = "intc"; + }; +}; + &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 0ddac81742e4..14222c72f0e0 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for the r8a7743 SoC * - * Copyright (C) 2016 Cogent Embedded Inc. + * Copyright (C) 2016-2017 Cogent Embedded Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -18,9 +18,19 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + }; + cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -28,8 +38,26 @@ reg = <0>; clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1500000000>; + power-domains = <&sysc R8A7743_PD_CA15_CPU1>; + next-level-cache = <&L2_CA15>; }; L2_CA15: cache-controller-0 { @@ -48,6 +76,12 @@ #size-cells = <2>; ranges; + apmu@e6152000 { + compatible = "renesas,r8a7743-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -65,6 +99,126 @@ resets = <&cpg 408>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7743", + "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 904>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 904>; + }; + irqc: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7743", "renesas,irqc"; #interrupt-cells = <2>; @@ -123,6 +277,11 @@ #power-domain-cells = <1>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7743"; + reg = <0 0xe6060000 0 0x250>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7743", "renesas,rcar-dmac"; @@ -189,6 +348,94 @@ dma-channels = <15>; }; + /* The memory map in the User's Manual maps the cores to bus + * numbers + */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7743", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7743", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7743", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7743", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7743", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7743", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -468,6 +715,29 @@ status = "disabled"; }; + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7743"; reg = <0 0xee700000 0 0x400>; @@ -480,6 +750,35 @@ #size-cells = <0>; status = "disabled"; }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7743", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7743", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + max-frequency = <97500000>; + status = "disabled"; + }; }; /* External root clock */ diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index 97840b340197..b4d679b04ad6 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for the SK-RZG1E board * - * Copyright (C) 2016 Cogent Embedded, Inc. + * Copyright (C) 2016-2017 Cogent Embedded, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -34,11 +34,34 @@ clock-frequency = <20000000>; }; +&pfc { + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + ether_pins: ether { + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; + }; + + phy1_pins: phy1 { + groups = "intc_irq8"; + function = "intc"; + }; +}; + &scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + status = "okay"; }; ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 2feb0084bb3b..aff90dfb8b32 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for the r8a7745 SoC * - * Copyright (C) 2016 Cogent Embedded Inc. + * Copyright (C) 2016-2017 Cogent Embedded Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -123,6 +123,11 @@ #power-domain-cells = <1>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7745"; + reg = <0 0xe6060000 0 0x11c>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7745", "renesas,rcar-dmac"; @@ -468,6 +473,29 @@ status = "disabled"; }; + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7745"; reg = <0 0xee700000 0 0x400>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2805a8608d4b..16358bf8d1db 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -830,6 +830,24 @@ status = "disabled"; }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7790"; reg = <0 0xee700000 0 0x400>; @@ -855,7 +873,7 @@ }; sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7790"; + compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; @@ -864,7 +882,7 @@ }; sata1: sata@ee500000 { - compatible = "renesas,sata-r8a7790"; + compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; reg = <0 0xee500000 0 0x2000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; @@ -909,7 +927,7 @@ }; vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7790"; + compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; @@ -918,7 +936,7 @@ }; vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7790"; + compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN1>; @@ -927,7 +945,7 @@ }; vin2: video@e6ef2000 { - compatible = "renesas,vin-r8a7790"; + compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN2>; @@ -936,7 +954,7 @@ }; vin3: video@e6ef3000 { - compatible = "renesas,vin-r8a7790"; + compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN3>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 001e6116c47c..0ce0b278e1cb 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -642,11 +642,19 @@ }; }; + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cec_clock>; + clock-names = "cec"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; @@ -702,7 +710,7 @@ }; eeprom@50 { - compatible = "renesas,24c02"; + compatible = "renesas,24c02", "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index bd93f699ad84..f1d1a9772153 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -890,6 +890,24 @@ status = "disabled"; }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7791"; reg = <0 0xee700000 0 0x400>; @@ -915,7 +933,7 @@ }; sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7791"; + compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA0>; @@ -924,7 +942,7 @@ }; sata1: sata@ee500000 { - compatible = "renesas,sata-r8a7791"; + compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee500000 0 0x2000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA1>; @@ -969,7 +987,7 @@ }; vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7791"; + compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; @@ -978,7 +996,7 @@ }; vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7791"; + compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN1>; @@ -987,7 +1005,7 @@ }; vin2: video@e6ef2000 { - compatible = "renesas,vin-r8a7791"; + compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN2>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 0efecb232ee5..2623f39bed2b 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -465,6 +465,24 @@ status = "disabled"; }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7792"; reg = <0 0xee100000 0 0x328>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 13b980f27bbc..497716b6fbe2 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -848,6 +848,24 @@ status = "disabled"; }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7793"; reg = <0 0xee700000 0 0x400>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 7d9a81d970d8..26535414203a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -588,6 +588,24 @@ status = "disabled"; }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7794"; reg = <0 0xee700000 0 0x400>; @@ -783,7 +801,7 @@ }; vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7794"; + compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN0>; @@ -792,7 +810,7 @@ }; vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7794"; + compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN1>; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 5726135b7f8a..fdb1570bc7d3 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -357,7 +357,6 @@ keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; sd-uhs-sdr12; @@ -372,7 +371,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ec91325d3b6e..4916c65e0ace 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -287,7 +287,6 @@ fifo-depth = <0x100>; mmc-ddr-1_8v; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; resets = <&cru SRST_EMMC>; @@ -599,7 +598,7 @@ rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>; }; - sdmmc_cd: sdmcc-cd { + sdmmc_cd: sdmmc-cd { rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index e1f5198723b2..ef1eabf2512c 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -190,7 +190,6 @@ #include "tps65910.dtsi" &mmc0 { /* sdmmc */ - num-slots = <1>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; @@ -202,7 +201,6 @@ }; &mmc1 { /* wifi */ - num-slots = <1>; status = "okay"; non-removable; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 7ca1cf5241e0..13e285c53def 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -132,7 +132,6 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - num-slots = <1>; vmmc-supply = <&vcc_sd>; status = "okay"; }; @@ -141,7 +140,6 @@ bus-width = <4>; disable-wp; non-removable; - num-slots = <1>; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; pinctrl-names = "default"; vmmc-supply = <&vcc_wifi>; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 8907deaab18e..400cbf9609e3 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -185,7 +185,6 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; vmmc-supply = <&vcc_emmc>; @@ -336,7 +335,6 @@ &mmc0 { bus-width = <4>; disable-wp; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd>; @@ -349,7 +347,6 @@ bus-width = <4>; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; vmmc-supply = <&vccio_wl>; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index 5b2a0b6885cd..8ba9e06062f3 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -89,7 +89,6 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; status = "okay"; @@ -256,7 +255,6 @@ }; &mmc0 { - num-slots = <1>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index ca0a1c4bc15c..53d6fc2fdbce 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -296,7 +296,6 @@ }; &mmc0 { - num-slots = <1>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 1b55192b7d04..73e384585755 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -40,7 +40,8 @@ /dts-v1/; -#include "rk322x.dtsi" +#include <dt-bindings/input/input.h> +#include "rk3229.dtsi" / { model = "Rockchip RK3229 Evaluation board"; @@ -51,6 +52,15 @@ reg = <0x60000000 0x40000000>; }; + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + ext_gmac: ext_gmac { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -67,6 +77,7 @@ regulator-name = "vcc_host"; regulator-always-on; regulator-boot-on; + vin-supply = <&vcc_sys>; }; vcc_phy: vcc-phy-regulator { @@ -77,9 +88,98 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + vin-supply = <&vccio_1v8>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vccio_1v8: vccio-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vccio_3v3: vccio-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_arm: vdd-arm-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power_key: power-key { + label = "GPIO Key Power"; + gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <100>; + wakeup-source; + }; }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + disable-wp; + non-removable; + status = "okay"; +}; + &gmac { assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>; @@ -96,7 +196,21 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + vccio1-supply = <&vccio_3v3>; + vccio2-supply = <&vccio_1v8>; + vccio4-supply = <&vccio_3v3>; +}; + &pinctrl { + keys { + pwr_key: pwr-key { + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; @@ -104,6 +218,19 @@ }; }; +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + status = "okay"; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/rk3229.dtsi index 142e60cab65f..6fe6c15fc13a 100644 --- a/arch/arm/boot/dts/imx6ul-geam-kit.dts +++ b/arch/arm/boot/dts/rk3229.dtsi @@ -1,22 +1,22 @@ /* - * Copyright (C) 2016 Amarula Solutions B.V. - * Copyright (C) 2016 Engicam S.r.l. + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful, + * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively, + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation @@ -40,62 +40,50 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "imx6ul-geam.dtsi" +#include "rk322x.dtsi" / { - model = "Engicam GEAM6UL"; - compatible = "engicam,imx6ul-geam", "fsl,imx6ul"; -}; + compatible = "rockchip,rk3229"; -&can1 { - status = "okay"; -}; - -&can2 { - status = "okay"; -}; + /delete-node/ opp-table0; -&lcdif { - display = <&display0>; - status = "okay"; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; - display0: display { - bits-per-pixel = <16>; - bus-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <28000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <30>; - hback-porch = <30>; - hsync-len = <64>; - vback-porch = <5>; - vfront-porch = <5>; - vsync-len = <20>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1000000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1175000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1275000>; + }; + opp-1296000000 { + opp-hz = /bits/ 64 <1296000000>; + opp-microvolt = <1325000>; + }; + opp-1392000000 { + opp-hz = /bits/ 64 <1392000000>; + opp-microvolt = <1375000>; + }; + opp-1464000000 { + opp-hz = /bits/ 64 <1464000000>; + opp-microvolt = <1400000>; }; }; }; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - status = "okay"; -}; - -&tsc { - measure-delay-time = <0x1ffff>; - pre-charge-time = <0x1fff>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index f3e4ffd9f818..06814421eed2 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -55,6 +55,7 @@ serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; + spi0 = &spi0; }; cpus { @@ -70,6 +71,7 @@ #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + enable-method = "psci"; }; cpu1: cpu@f01 { @@ -78,6 +80,7 @@ reg = <0xf01>; resets = <&cru SRST_CORE1>; operating-points-v2 = <&cpu0_opp_table>; + enable-method = "psci"; }; cpu2: cpu@f02 { @@ -86,6 +89,7 @@ reg = <0xf02>; resets = <&cru SRST_CORE2>; operating-points-v2 = <&cpu0_opp_table>; + enable-method = "psci"; }; cpu3: cpu@f03 { @@ -94,6 +98,7 @@ reg = <0xf03>; resets = <&cru SRST_CORE3>; operating-points-v2 = <&cpu0_opp_table>; + enable-method = "psci"; }; }; @@ -151,6 +156,11 @@ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + timer { compatible = "arm,armv7-timer"; arm,cpu-registers-not-fw-configured; @@ -196,6 +206,19 @@ status = "disabled"; }; + spdif: spdif@100d0000 { + compatible = "rockchip,rk3228-spdif"; + reg = <0x100d0000 0x1000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>; + clock-names = "mclk", "hclk"; + dmas = <&pdma 10>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + status = "disabled"; + }; + i2s2: i2s2@100e0000 { compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100e0000 0x4000>; @@ -215,6 +238,11 @@ #address-cells = <1>; #size-cells = <1>; + io_domains: io-domains { + compatible = "rockchip,rk3228-io-voltage-domain"; + status = "disabled"; + }; + u2phy0: usb2-phy@760 { compatible = "rockchip,rk3228-usb2phy"; reg = <0x0760 0x0c>; @@ -309,6 +337,23 @@ status = "disabled"; }; + efuse: efuse@11040000 { + compatible = "rockchip,rk3228-efuse"; + reg = <0x11040000 0x20>; + clocks = <&cru PCLK_EFUSE_256>; + clock-names = "pclk_efuse"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + efuse_id: id@7 { + reg = <0x7 0x10>; + }; + cpu_leakage: cpu_leakage@17 { + reg = <0x17 0x1>; + }; + }; + i2c0: i2c@11050000 { compatible = "rockchip,rk3228-i2c"; reg = <0x11050000 0x1000>; @@ -361,6 +406,19 @@ status = "disabled"; }; + spi0: spi@11090000 { + compatible = "rockchip,rk3228-spi"; + reg = <0x11090000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0 &spi0_cs1>; + status = "disabled"; + }; + wdt: watchdog@110a0000 { compatible = "snps,dw-wdt"; reg = <0x110a0000 0x100>; @@ -500,8 +558,70 @@ status = "disabled"; }; + vpu_mmu: iommu@20020800 { + compatible = "rockchip,iommu"; + reg = <0x20020800 0x100>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vpu_mmu"; + iommu-cells = <0>; + status = "disabled"; + }; + + vdec_mmu: iommu@20030480 { + compatible = "rockchip,iommu"; + reg = <0x20030480 0x40>, <0x200304c0 0x40>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vdec_mmu"; + iommu-cells = <0>; + status = "disabled"; + }; + + vop_mmu: iommu@20053f00 { + compatible = "rockchip,iommu"; + reg = <0x20053f00 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vop_mmu"; + iommu-cells = <0>; + status = "disabled"; + }; + + iep_mmu: iommu@20070800 { + compatible = "rockchip,iommu"; + reg = <0x20070800 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "iep_mmu"; + iommu-cells = <0>; + status = "disabled"; + }; + + sdmmc: dwmmc@30000000 { + compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30000000 0x4000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "disabled"; + }; + + sdio: dwmmc@30010000 { + compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30010000 0x4000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; + status = "disabled"; + }; + emmc: dwmmc@30020000 { - compatible = "rockchip,rk3288-dw-mshc"; + compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30020000 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <37500000>; @@ -511,7 +631,6 @@ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; bus-width = <8>; default-sample-phase = <158>; - num-slots = <1>; fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; @@ -710,6 +829,40 @@ drive-strength = <12>; }; + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none_drv_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <1 RK_PB7 1 &pcfg_pull_none_drv_12ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_none_drv_12ma>, + <1 RK_PC3 1 &pcfg_pull_none_drv_12ma>, + <1 RK_PC4 1 &pcfg_pull_none_drv_12ma>, + <1 RK_PC5 1 &pcfg_pull_none_drv_12ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none_drv_12ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none_drv_12ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none_drv_12ma>, + <3 RK_PA3 1 &pcfg_pull_none_drv_12ma>, + <3 RK_PA4 1 &pcfg_pull_none_drv_12ma>, + <3 RK_PA5 1 &pcfg_pull_none_drv_12ma>; + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; @@ -797,6 +950,42 @@ }; }; + spi-0 { + spi0_clk: spi0-clk { + rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <0 14 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <1 12 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi-1 { + spi1_clk: spi1-clk { + rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <2 2 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <2 3 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + i2s1 { i2s1_bus: i2s1-bus { rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>, @@ -835,6 +1024,12 @@ }; }; + spdif { + spdif_tx: spdif-tx { + rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + tsadc { otp_gpio: otp-gpio { rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 0dec94c3583b..39b61dce97ad 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -45,7 +45,44 @@ / { memory@0 { device_type = "memory"; - reg = <0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <100000>; + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <300000>; + }; + + menu { + label = "Menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <640000>; + }; + + esc { + label = "Esc"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1000000>; + }; + + home { + label = "Home"; + linux,code = <KEY_HOME>; + press-threshold-microvolt = <1300000>; + }; }; backlight: backlight { @@ -212,19 +249,22 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; status = "okay"; }; +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; disable-wp; /* wp not hooked up */ - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; status = "okay"; @@ -248,6 +288,11 @@ status = "ok"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 61d1c1028317..41405974253a 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -47,7 +47,7 @@ compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; memory@0 { - reg = <0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; device_type = "memory"; }; @@ -77,7 +77,6 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; status = "okay"; @@ -99,6 +98,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 813496618d08..5f05815f47e0 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -47,7 +47,7 @@ / { memory@0 { device_type = "memory"; - reg = <0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; }; ext_gmac: external-gmac-clock { @@ -78,7 +78,6 @@ mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; vmmc-supply = <&vcc_io>; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index b11a282c334c..7da0947ababb 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -269,7 +269,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; vmmc-supply = <&vcc_sd>; @@ -284,7 +283,6 @@ disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>; sd-uhs-sdr12; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 32dabae12e67..b9e6f3a97240 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -46,7 +46,7 @@ / { memory@0 { device_type = "memory"; - reg = <0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; }; adc-keys { @@ -208,7 +208,6 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; vmmc-supply = <&vcc_io>; @@ -527,7 +526,6 @@ bus-width = <4>; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; vmmc-supply = <&vbat_wl>; @@ -541,7 +539,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; vmmc-supply = <&vcc_sd>; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 30e93f694ae8..4d923aa6ed11 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -54,7 +54,7 @@ memory@0 { device_type = "memory"; - reg = <0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; }; ext_gmac: external-gmac-clock { @@ -126,7 +126,6 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; vmmc-supply = <&vcc_io>; @@ -404,7 +403,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; vmmc-supply = <&vcc_sd>; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 3dda79579b51..1241cbcfc16f 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -263,7 +263,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vdd_io_sd>; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index 26cd3ad45160..99cfae875e12 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -55,7 +55,7 @@ */ memory { device_type = "memory"; - reg = <0 0x8000000>; + reg = <0x0 0x0 0x0 0x8000000>; }; aliases { @@ -136,7 +136,6 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; vmmc-supply = <&vdd_3v3_io>; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index aa1f9ecff231..f084e0c8dcb3 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -50,7 +50,7 @@ memory@0 { device_type = "memory"; - reg = <0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; }; ext_gmac: external-gmac-clock { @@ -150,7 +150,6 @@ mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; vmmc-supply = <&vcc_io>; @@ -164,7 +163,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; /* wp not hooked up */ - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; sd-uhs-sdr12; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 1145b62edde7..e95215c9788b 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -50,7 +50,7 @@ memory@0 { device_type = "memory"; - reg = <0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; }; ext_gmac: external-gmac-clock { @@ -354,7 +354,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc_sdmmc>; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 749a9b86e6e2..b9c471fcbd42 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -43,7 +43,7 @@ / { memory@0 { - reg = <0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; device_type = "memory"; }; @@ -89,7 +89,6 @@ cap-mmc-highspeed; disable-wp; non-removable; - num-slots = <1>; mmc-pwrseq = <&emmc_pwrseq>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 8ed25e9f60bc..0e084b8a86ac 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -147,7 +147,6 @@ disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; vmmc-supply = <&vcc_io>; @@ -161,7 +160,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; /* wp not hooked up */ - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc_sd>; diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts index f601c78386a9..346b0d8b474d 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dts +++ b/arch/arm/boot/dts/rk3288-tinker.dts @@ -50,7 +50,7 @@ compatible = "asus,rk3288-tinker", "rockchip,rk3288"; memory { - reg = <0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; device_type = "memory"; }; @@ -156,6 +156,11 @@ status = "ok"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; @@ -465,7 +470,6 @@ cap-sd-highspeed; card-detect-delay = <200>; disable-wp; /* wp not hooked up */ - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index aef07101e9ab..95e9bee8bca2 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -117,7 +117,6 @@ card-detect-delay = <200>; cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; rockchip,default-sample-phase = <90>; - num-slots = <1>; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index d709fa1847f9..6e5bd8974f22 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -49,7 +49,7 @@ / { memory@0 { device_type = "memory"; - reg = <0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x80000000>; }; gpio_keys: gpio-keys { @@ -156,7 +156,6 @@ mmc-hs200-1_8v; mmc-pwrseq = <&emmc_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; }; @@ -372,7 +371,6 @@ keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; sd-uhs-sdr12; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 858e1fed762a..356ed1e62452 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -49,8 +49,8 @@ #include <dt-bindings/soc/rockchip,boot-mode.h> / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; compatible = "rockchip,rk3288"; @@ -139,13 +139,13 @@ amba { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; dmac_peri: dma-controller@ff250000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0xff250000 0x4000>; + reg = <0x0 0xff250000 0x0 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -156,7 +156,7 @@ dmac_bus_ns: dma-controller@ff600000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0xff600000 0x4000>; + reg = <0x0 0xff600000 0x0 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -168,7 +168,7 @@ dmac_bus_s: dma-controller@ffb20000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0xffb20000 0x4000>; + reg = <0x0 0xffb20000 0x0 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -179,8 +179,8 @@ }; reserved-memory { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; /* @@ -194,7 +194,7 @@ * is found. */ dma-unusable@fe000000 { - reg = <0xfe000000 0x1000000>; + reg = <0x0 0xfe000000 0x0 0x1000000>; }; }; @@ -217,7 +217,7 @@ timer: timer@ff810000 { compatible = "rockchip,rk3288-timer"; - reg = <0xff810000 0x20>; + reg = <0x0 0xff810000 0x0 0x20>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&xin24m>, <&cru PCLK_TIMER>; clock-names = "timer", "pclk"; @@ -236,7 +236,7 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xff0c0000 0x4000>; + reg = <0x0 0xff0c0000 0x0 0x4000>; resets = <&cru SRST_MMC0>; reset-names = "reset"; status = "disabled"; @@ -250,7 +250,7 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xff0d0000 0x4000>; + reg = <0x0 0xff0d0000 0x0 0x4000>; resets = <&cru SRST_SDIO0>; reset-names = "reset"; status = "disabled"; @@ -264,7 +264,7 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xff0e0000 0x4000>; + reg = <0x0 0xff0e0000 0x0 0x4000>; resets = <&cru SRST_SDIO1>; reset-names = "reset"; status = "disabled"; @@ -278,7 +278,7 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xff0f0000 0x4000>; + reg = <0x0 0xff0f0000 0x0 0x4000>; resets = <&cru SRST_EMMC>; reset-names = "reset"; status = "disabled"; @@ -286,7 +286,7 @@ saradc: saradc@ff100000 { compatible = "rockchip,saradc"; - reg = <0xff100000 0x100>; + reg = <0x0 0xff100000 0x0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; @@ -305,7 +305,7 @@ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; - reg = <0xff110000 0x1000>; + reg = <0x0 0xff110000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -320,7 +320,7 @@ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; - reg = <0xff120000 0x1000>; + reg = <0x0 0xff120000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -335,7 +335,7 @@ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; - reg = <0xff130000 0x1000>; + reg = <0x0 0xff130000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -343,7 +343,7 @@ i2c1: i2c@ff140000 { compatible = "rockchip,rk3288-i2c"; - reg = <0xff140000 0x1000>; + reg = <0x0 0xff140000 0x0 0x1000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -356,7 +356,7 @@ i2c3: i2c@ff150000 { compatible = "rockchip,rk3288-i2c"; - reg = <0xff150000 0x1000>; + reg = <0x0 0xff150000 0x0 0x1000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -369,7 +369,7 @@ i2c4: i2c@ff160000 { compatible = "rockchip,rk3288-i2c"; - reg = <0xff160000 0x1000>; + reg = <0x0 0xff160000 0x0 0x1000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -382,7 +382,7 @@ i2c5: i2c@ff170000 { compatible = "rockchip,rk3288-i2c"; - reg = <0xff170000 0x1000>; + reg = <0x0 0xff170000 0x0 0x1000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -395,7 +395,7 @@ uart0: serial@ff180000 { compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0xff180000 0x100>; + reg = <0x0 0xff180000 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -408,7 +408,7 @@ uart1: serial@ff190000 { compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0xff190000 0x100>; + reg = <0x0 0xff190000 0x0 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -421,7 +421,7 @@ uart2: serial@ff690000 { compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0xff690000 0x100>; + reg = <0x0 0xff690000 0x0 0x100>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -434,7 +434,7 @@ uart3: serial@ff1b0000 { compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0xff1b0000 0x100>; + reg = <0x0 0xff1b0000 0x0 0x100>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -447,7 +447,7 @@ uart4: serial@ff1c0000 { compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; - reg = <0xff1c0000 0x100>; + reg = <0x0 0xff1c0000 0x0 0x100>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -535,7 +535,7 @@ tsadc: tsadc@ff280000 { compatible = "rockchip,rk3288-tsadc"; - reg = <0xff280000 0x100>; + reg = <0x0 0xff280000 0x0 0x100>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; clock-names = "tsadc", "apb_pclk"; @@ -552,7 +552,7 @@ gmac: ethernet@ff290000 { compatible = "rockchip,rk3288-gmac"; - reg = <0xff290000 0x10000>; + reg = <0x0 0xff290000 0x0 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq", "eth_wake_irq"; @@ -572,7 +572,7 @@ usb_host0_ehci: usb@ff500000 { compatible = "generic-ehci"; - reg = <0xff500000 0x100>; + reg = <0x0 0xff500000 0x0 0x100>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST0>; clock-names = "usbhost"; @@ -586,7 +586,7 @@ usb_host1: usb@ff540000 { compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2"; - reg = <0xff540000 0x40000>; + reg = <0x0 0xff540000 0x0 0x40000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST1>; clock-names = "otg"; @@ -599,7 +599,7 @@ usb_otg: usb@ff580000 { compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2"; - reg = <0xff580000 0x40000>; + reg = <0x0 0xff580000 0x0 0x40000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; @@ -614,7 +614,7 @@ usb_hsic: usb@ff5c0000 { compatible = "generic-ehci"; - reg = <0xff5c0000 0x100>; + reg = <0x0 0xff5c0000 0x0 0x100>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HSIC>; clock-names = "usbhost"; @@ -623,7 +623,7 @@ i2c0: i2c@ff650000 { compatible = "rockchip,rk3288-i2c"; - reg = <0xff650000 0x1000>; + reg = <0x0 0xff650000 0x0 0x1000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -636,7 +636,7 @@ i2c2: i2c@ff660000 { compatible = "rockchip,rk3288-i2c"; - reg = <0xff660000 0x1000>; + reg = <0x0 0xff660000 0x0 0x1000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -649,7 +649,7 @@ pwm0: pwm@ff680000 { compatible = "rockchip,rk3288-pwm"; - reg = <0xff680000 0x10>; + reg = <0x0 0xff680000 0x0 0x10>; #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -660,7 +660,7 @@ pwm1: pwm@ff680010 { compatible = "rockchip,rk3288-pwm"; - reg = <0xff680010 0x10>; + reg = <0x0 0xff680010 0x0 0x10>; #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; @@ -671,7 +671,7 @@ pwm2: pwm@ff680020 { compatible = "rockchip,rk3288-pwm"; - reg = <0xff680020 0x10>; + reg = <0x0 0xff680020 0x0 0x10>; #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; @@ -682,7 +682,7 @@ pwm3: pwm@ff680030 { compatible = "rockchip,rk3288-pwm"; - reg = <0xff680030 0x10>; + reg = <0x0 0xff680030 0x0 0x10>; #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; @@ -693,10 +693,10 @@ bus_intmem@ff700000 { compatible = "mmio-sram"; - reg = <0xff700000 0x18000>; + reg = <0x0 0xff700000 0x0 0x18000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0xff700000 0x18000>; + ranges = <0 0x0 0xff700000 0x18000>; smp-sram@0 { compatible = "rockchip,rk3066-smp-sram"; reg = <0x00 0x10>; @@ -705,12 +705,12 @@ sram@ff720000 { compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; - reg = <0xff720000 0x1000>; + reg = <0x0 0xff720000 0x0 0x1000>; }; pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd"; - reg = <0xff730000 0x100>; + reg = <0x0 0xff730000 0x0 0x100>; power: power-controller { compatible = "rockchip,rk3288-power-controller"; @@ -831,12 +831,12 @@ sgrf: syscon@ff740000 { compatible = "rockchip,rk3288-sgrf", "syscon"; - reg = <0xff740000 0x1000>; + reg = <0x0 0xff740000 0x0 0x1000>; }; cru: clock-controller@ff760000 { compatible = "rockchip,rk3288-cru"; - reg = <0xff760000 0x1000>; + reg = <0x0 0xff760000 0x0 0x1000>; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; @@ -854,7 +854,7 @@ grf: syscon@ff770000 { compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; - reg = <0xff770000 0x1000>; + reg = <0x0 0xff770000 0x0 0x1000>; edp_phy: edp-phy { compatible = "rockchip,rk3288-dp-phy"; @@ -903,7 +903,7 @@ wdt: watchdog@ff800000 { compatible = "rockchip,rk3288-wdt", "snps,dw-wdt"; - reg = <0xff800000 0x100>; + reg = <0x0 0xff800000 0x0 0x100>; clocks = <&cru PCLK_WDT>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -911,7 +911,7 @@ spdif: sound@ff88b0000 { compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; - reg = <0xff8b0000 0x10000>; + reg = <0x0 0xff8b0000 0x0 0x10000>; #sound-dai-cells = <0>; clock-names = "hclk", "mclk"; clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; @@ -926,7 +926,7 @@ i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; - reg = <0xff890000 0x10000>; + reg = <0x0 0xff890000 0x0 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -943,7 +943,7 @@ crypto: cypto-controller@ff8a0000 { compatible = "rockchip,rk3288-crypto"; - reg = <0xff8a0000 0x4000>; + reg = <0x0 0xff8a0000 0x0 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>; @@ -953,9 +953,28 @@ status = "okay"; }; + iep_mmu: iommu@ff900800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff900800 0x0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "iep_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + isp_mmu: iommu@ff914000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "isp_mmu"; + #iommu-cells = <0>; + rockchip,disable-mmu-reset; + status = "disabled"; + }; + vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0xff930000 0x19c>; + reg = <0x0 0xff930000 0x0 0x19c>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -988,7 +1007,7 @@ vopb_mmu: iommu@ff930300 { compatible = "rockchip,iommu"; - reg = <0xff930300 0x100>; + reg = <0x0 0xff930300 0x0 0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; power-domains = <&power RK3288_PD_VIO>; @@ -998,7 +1017,7 @@ vopl: vop@ff940000 { compatible = "rockchip,rk3288-vop"; - reg = <0xff940000 0x19c>; + reg = <0x0 0xff940000 0x0 0x19c>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -1031,7 +1050,7 @@ vopl_mmu: iommu@ff940300 { compatible = "rockchip,iommu"; - reg = <0xff940300 0x100>; + reg = <0x0 0xff940300 0x0 0x100>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; power-domains = <&power RK3288_PD_VIO>; @@ -1041,7 +1060,7 @@ mipi_dsi: mipi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0xff960000 0x4000>; + reg = <0x0 0xff960000 0x0 0x4000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; clock-names = "ref", "pclk"; @@ -1069,7 +1088,7 @@ edp: dp@ff970000 { compatible = "rockchip,rk3288-dp"; - reg = <0xff970000 0x4000>; + reg = <0x0 0xff970000 0x0 0x4000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; clock-names = "dp", "pclk"; @@ -1101,7 +1120,7 @@ hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; - reg = <0xff980000 0x20000>; + reg = <0x0 0xff980000 0x0 0x20000>; reg-io-width = <4>; rockchip,grf = <&grf>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; @@ -1126,9 +1145,27 @@ }; }; + vpu_mmu: iommu@ff9a0800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff9a0800 0x0 0x100>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vpu_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + hevc_mmu: iommu@ff9c0440 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hevc_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + gpu: gpu@ffa30000 { compatible = "rockchip,rk3288-mali", "arm,mali-t760"; - reg = <0xffa30000 0x10000>; + reg = <0x0 0xffa30000 0x0 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -1170,72 +1207,72 @@ qos_gpu_r: qos@ffaa0000 { compatible = "syscon"; - reg = <0xffaa0000 0x20>; + reg = <0x0 0xffaa0000 0x0 0x20>; }; qos_gpu_w: qos@ffaa0080 { compatible = "syscon"; - reg = <0xffaa0080 0x20>; + reg = <0x0 0xffaa0080 0x0 0x20>; }; qos_vio1_vop: qos@ffad0000 { compatible = "syscon"; - reg = <0xffad0000 0x20>; + reg = <0x0 0xffad0000 0x0 0x20>; }; qos_vio1_isp_w0: qos@ffad0100 { compatible = "syscon"; - reg = <0xffad0100 0x20>; + reg = <0x0 0xffad0100 0x0 0x20>; }; qos_vio1_isp_w1: qos@ffad0180 { compatible = "syscon"; - reg = <0xffad0180 0x20>; + reg = <0x0 0xffad0180 0x0 0x20>; }; qos_vio0_vop: qos@ffad0400 { compatible = "syscon"; - reg = <0xffad0400 0x20>; + reg = <0x0 0xffad0400 0x0 0x20>; }; qos_vio0_vip: qos@ffad0480 { compatible = "syscon"; - reg = <0xffad0480 0x20>; + reg = <0x0 0xffad0480 0x0 0x20>; }; qos_vio0_iep: qos@ffad0500 { compatible = "syscon"; - reg = <0xffad0500 0x20>; + reg = <0x0 0xffad0500 0x0 0x20>; }; qos_vio2_rga_r: qos@ffad0800 { compatible = "syscon"; - reg = <0xffad0800 0x20>; + reg = <0x0 0xffad0800 0x0 0x20>; }; qos_vio2_rga_w: qos@ffad0880 { compatible = "syscon"; - reg = <0xffad0880 0x20>; + reg = <0x0 0xffad0880 0x0 0x20>; }; qos_vio1_isp_r: qos@ffad0900 { compatible = "syscon"; - reg = <0xffad0900 0x20>; + reg = <0x0 0xffad0900 0x0 0x20>; }; qos_video: qos@ffae0000 { compatible = "syscon"; - reg = <0xffae0000 0x20>; + reg = <0x0 0xffae0000 0x0 0x20>; }; qos_hevc_r: qos@ffaf0000 { compatible = "syscon"; - reg = <0xffaf0000 0x20>; + reg = <0x0 0xffaf0000 0x0 0x20>; }; qos_hevc_w: qos@ffaf0080 { compatible = "syscon"; - reg = <0xffaf0080 0x20>; + reg = <0x0 0xffaf0080 0x0 0x20>; }; gic: interrupt-controller@ffc01000 { @@ -1244,16 +1281,16 @@ #interrupt-cells = <3>; #address-cells = <0>; - reg = <0xffc01000 0x1000>, - <0xffc02000 0x2000>, - <0xffc04000 0x2000>, - <0xffc06000 0x2000>; + reg = <0x0 0xffc01000 0x0 0x1000>, + <0x0 0xffc02000 0x0 0x2000>, + <0x0 0xffc04000 0x0 0x2000>, + <0x0 0xffc06000 0x0 0x2000>; interrupts = <GIC_PPI 9 0xf04>; }; efuse: efuse@ffb40000 { compatible = "rockchip,rk3288-efuse"; - reg = <0xffb40000 0x20>; + reg = <0x0 0xffb40000 0x0 0x20>; #address-cells = <1>; #size-cells = <1>; clocks = <&cru PCLK_EFUSE256>; @@ -1268,13 +1305,13 @@ compatible = "rockchip,rk3288-pinctrl"; rockchip,grf = <&grf>; rockchip,pmu = <&pmu>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; gpio0: gpio0@ff750000 { compatible = "rockchip,gpio-bank"; - reg = <0xff750000 0x100>; + reg = <0x0 0xff750000 0x0 0x100>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO0>; @@ -1287,7 +1324,7 @@ gpio1: gpio1@ff780000 { compatible = "rockchip,gpio-bank"; - reg = <0xff780000 0x100>; + reg = <0x0 0xff780000 0x0 0x100>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO1>; @@ -1300,7 +1337,7 @@ gpio2: gpio2@ff790000 { compatible = "rockchip,gpio-bank"; - reg = <0xff790000 0x100>; + reg = <0x0 0xff790000 0x0 0x100>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO2>; @@ -1313,7 +1350,7 @@ gpio3: gpio3@ff7a0000 { compatible = "rockchip,gpio-bank"; - reg = <0xff7a0000 0x100>; + reg = <0x0 0xff7a0000 0x0 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO3>; @@ -1326,7 +1363,7 @@ gpio4: gpio4@ff7b0000 { compatible = "rockchip,gpio-bank"; - reg = <0xff7b0000 0x100>; + reg = <0x0 0xff7b0000 0x0 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO4>; @@ -1339,7 +1376,7 @@ gpio5: gpio5@ff7c0000 { compatible = "rockchip,gpio-bank"; - reg = <0xff7c0000 0x100>; + reg = <0x0 0xff7c0000 0x0 0x100>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO5>; @@ -1352,7 +1389,7 @@ gpio6: gpio6@ff7d0000 { compatible = "rockchip,gpio-bank"; - reg = <0xff7d0000 0x100>; + reg = <0x0 0xff7d0000 0x0 0x100>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO6>; @@ -1365,7 +1402,7 @@ gpio7: gpio7@ff7e0000 { compatible = "rockchip,gpio-bank"; - reg = <0xff7e0000 0x100>; + reg = <0x0 0xff7e0000 0x0 0x100>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO7>; @@ -1378,7 +1415,7 @@ gpio8: gpio8@ff7f0000 { compatible = "rockchip,gpio-bank"; - reg = <0xff7f0000 0x100>; + reg = <0x0 0xff7f0000 0x0 0x100>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO8>; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 58cf4ac079c3..86a57f823616 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -54,6 +54,184 @@ chosen { stdout-path = "serial2:1500000n8"; }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + pwms = <&pwm0 0 25000 0>; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&i2c0 { + status = "okay"; + i2c-scl-rising-time-ns = <275>; + i2c-scl-falling-time-ns = <16>; + clock-frequency = <400000>; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_core: DCDC_REG1 { + regulator-name= "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-state-enabled; + regulator-state-uv = <900000>; + }; + }; + + vdd_cam: DCDC_REG2 { + regulator-name= "vdd_cam"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2000000>; + regulator-state-mem { + regulator-state-disabled; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name= "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-state-enabled; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name= "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-state-enabled; + regulator-state-uv = <3300000>; + }; + }; + + vdd_10: LDO_REG1 { + regulator-name= "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-state-disabled; + }; + }; + + vcc_18: LDO_REG2 { + regulator-name= "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-state-disabled; + }; + }; + + vdd10_pmu: LDO_REG3 { + regulator-name= "vdd10_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-state-enabled; + regulator-state-uv = <1000000>; + }; + }; + }; + }; + + bma250: accelerometer@19 { + compatible = "bosch,bma250e"; + reg = <0x19>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; }; &uart0 { @@ -67,3 +245,15 @@ &uart2 { status = "okay"; }; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 437098b556eb..e7cd1315db1b 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -52,6 +52,10 @@ interrupt-parent = <&gic>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -65,6 +69,33 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0xf00>; + clocks = <&cru ARMCLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <975000>; + clock-latency-ns = <40000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1150000>; + clock-latency-ns = <40000>; }; }; @@ -154,9 +185,221 @@ status = "disabled"; }; + i2c1: i2c@10240000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x10240000 0x1000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + i2c2: i2c@10250000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x10250000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + i2c3: i2c@10260000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x10260000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + spi: spi@10270000 { + compatible = "rockchip,rv1108-spi"; + reg = <0x10270000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&pdma 8>, <&pdma 9>; + #dma-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm4: pwm@10280000 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280000 0x10>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@10280010 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280010 0x10>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@10280020 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280020 0x10>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@10280030 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280030 0x10>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + grf: syscon@10300000 { - compatible = "rockchip,rv1108-grf", "syscon"; + compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd"; reg = <0x10300000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy: usb2-phy@100 { + compatible = "rockchip,rv1108-usb2phy"; + reg = <0x100 0x0c>; + clocks = <&cru SCLK_USBPHY>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usbphy"; + rockchip,usbgrf = <&usbgrf>; + status = "disabled"; + + u2phy_otg: otg-port { + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-mux"; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy_host: host-port { + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + watchdog: wdt@10360000 { + compatible = "snps,dw-wdt"; + reg = <0x10360000 0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_WDT>; + clock-names = "pclk_wdt"; + status = "disabled"; + }; + + adc: adc@1038c000 { + compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc"; + reg = <0x1038c000 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clock-frequency = <1000000>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + i2c0: i2c@20000000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x20000000 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C0_PMU>, <&cru PCLK_I2C0_PMU>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + pwm0: pwm@20040000 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040000 0x10>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@20040010 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040010 0x10>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@20040020 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040020 0x10>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@20040030 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040030 0x10>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; }; pmugrf: syscon@20060000 { @@ -164,6 +407,11 @@ reg = <0x20060000 0x1000>; }; + usbgrf: syscon@202a0000 { + compatible = "rockchip,rv1108-usbgrf", "syscon"; + reg = <0x202a0000 0x1000>; + }; + cru: clock-controller@20200000 { compatible = "rockchip,rv1108-cru"; reg = <0x20200000 0x1000>; @@ -174,37 +422,78 @@ emmc: dwmmc@30110000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + reg = <0x30110000 0x4000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x30110000 0x4000>; + max-frequency = <150000000>; status = "disabled"; }; sdio: dwmmc@30120000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + reg = <0x30120000 0x4000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x30120000 0x4000>; + max-frequency = <150000000>; status = "disabled"; }; sdmmc: dwmmc@30130000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 100000000>; + reg = <0x30130000 0x4000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x30130000 0x4000>; + max-frequency = <100000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "disabled"; + }; + + usb_host_ehci: usb@30140000 { + compatible = "generic-ehci"; + reg = <0x30140000 0x20000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host_ohci: usb@30160000 { + compatible = "generic-ohci"; + reg = <0x30160000 0x20000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_otg: usb@30180000 { + compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x30180000 0x40000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; status = "disabled"; }; @@ -301,6 +590,11 @@ drive-strength = <12>; }; + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { bias-pull-up; drive-strength = <8>; @@ -328,6 +622,13 @@ input-enable; }; + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>, + <0 RK_PB2 RK_FUNC_1 &pcfg_pull_none_smt>; + }; + }; + i2c1 { i2c1_xfer: i2c1-xfer { rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, @@ -366,6 +667,54 @@ }; }; + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <0 RK_PC5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <0 RK_PC0 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = <1 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = <1 RK_PB0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = <1 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_clk: sdmmc-clk { rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 60e69aeacbdb..38d2216c7ead 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -416,6 +416,17 @@ }; }; + isc: isc@f0008000 { + compatible = "atmel,sama5d2-isc"; + reg = <0xf0008000 0x4000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; + clock-names = "hclock", "iscck", "gck"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + status = "disabled"; + }; + ramc0: ramc@f000c000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf000c000 0x200>; @@ -494,6 +505,24 @@ clocks = <&plla>; }; + audio_pll_frac: audiopll_fracck { + compatible = "atmel,sama5d2-clk-audio-pll-frac"; + #clock-cells = <0>; + clocks = <&main>; + }; + + audio_pll_pad: audiopll_padck { + compatible = "atmel,sama5d2-clk-audio-pll-pad"; + #clock-cells = <0>; + clocks = <&audio_pll_frac>; + }; + + audio_pll_pmc: audiopll_pmcck { + compatible = "atmel,sama5d2-clk-audio-pll-pmc"; + #clock-cells = <0>; + clocks = <&audio_pll_frac>; + }; + utmi: utmick { compatible = "atmel,at91sam9x5-clk-utmi"; #clock-cells = <0>; @@ -895,7 +924,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>; sdmmc0_gclk: sdmmc0_gclk { #clock-cells = <0>; @@ -925,6 +954,11 @@ atmel,clk-output-range = <0 83000000>; }; + isc_gclk: isc_gclk { + #clock-cells = <0>; + reg = <46>; + }; + pdmic_gclk: pdmic_gclk { #clock-cells = <0>; reg = <48>; @@ -951,9 +985,37 @@ reg = <57>; atmel,clk-output-range = <0 80000000>; }; + + classd_gclk: classd_gclk { + #clock-cells = <0>; + reg = <59>; + atmel,clk-output-range = <0 100000000>; + }; }; }; + qspi0: spi@f0020000 { + compatible = "atmel,sama5d2-qspi"; + reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&qspi0_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi1: spi@f0024000 { + compatible = "atmel,sama5d2-qspi"; + reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&qspi1_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sha@f0028000 { compatible = "atmel,at91sam9g46-sha"; reg = <0xf0028000 0x100>; @@ -1406,6 +1468,19 @@ status = "okay"; }; + classd: classd@fc048000 { + compatible = "atmel,sama5d2-classd"; + reg = <0xfc048000 0x100>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(47))>; + dma-names = "tx"; + clocks = <&classd_clk>, <&classd_gclk>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + can1: can@fc050000 { compatible = "bosch,m_can"; reg = <0xfc050000 0x4000>, <0x210000 0x4000>; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 54bc6d3cf290..40f4ad3c34c6 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -98,6 +98,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; status = "disabled"; }; @@ -116,6 +117,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; status = "disabled"; }; @@ -134,6 +136,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index df2232d767ed..5f347054527d 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -63,6 +63,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 6c5affe2d0f5..2310a4e97768 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -37,6 +37,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x300>; + /* cpufreq controls */ + operating-points = <998400 0 + 800000 0 + 400000 0 + 200000 0>; + clocks = <&prcmu_clk PRCMU_ARMSS>; + clock-names = "cpu"; + clock-latency = <20000>; }; CPU1: cpu@301 { device_type = "cpu"; @@ -494,13 +502,6 @@ reg = <0x80157450 0xC>; }; - cpufreq { - compatible = "stericsson,cpufreq-ux500"; - clocks = <&prcmu_clk PRCMU_ARMSS>; - clock-names = "armss"; - status = "disabled"; - }; - thermal@801573c0 { compatible = "stericsson,db8500-thermal"; reg = <0x801573c0 0x40>; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index dcda0bbefe5b..97b1c2321ba9 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -55,7 +55,7 @@ compatible = "st,stm32429i-eval", "st,stm32f429"; chosen { - bootargs = "root=/dev/ram rdinit=/linuxrc"; + bootargs = "root=/dev/ram"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index ae47cde7952f..c66d617e4245 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -54,7 +54,7 @@ compatible = "st,stm32f429i-disco", "st,stm32f429"; chosen { - bootargs = "root=/dev/ram rdinit=/linuxrc"; + bootargs = "root=/dev/ram"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index a8113dc879cf..dd7e99b1f43b 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -361,6 +361,31 @@ status = "disabled"; }; + dac: dac@40007400 { + compatible = "st,stm32f4-dac-core"; + reg = <0x40007400 0x400>; + resets = <&rcc STM32F4_APB1_RESET(DAC)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>; + clock-names = "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dac1: dac@1 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <1>; + status = "disabled"; + }; + + dac2: dac@2 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <2>; + status = "disabled"; + }; + }; + usart7: serial@40007800 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007800 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 75470c34b92c..6ae1f037f3f0 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -53,7 +53,7 @@ compatible = "st,stm32f469i-disco", "st,stm32f469"; chosen { - bootargs = "root=/dev/ram rdinit=/linuxrc"; + bootargs = "root=/dev/ram"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 4506eb97a4ab..5633860037d2 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -167,6 +167,15 @@ status = "disabled"; }; + cec: cec@40006c00 { + compatible = "st,stm32-cec"; + reg = <0x40006C00 0x400>; + interrupts = <94>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>; + clock-names = "cec", "hdmi-cec"; + status = "disabled"; + }; + usart7: serial@40007800 { compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40007800 0x400>; @@ -336,6 +345,15 @@ st,bank-name = "GPIOK"; }; + cec_pins_a: cec@0 { + pins { + pinmux = <STM32F746_PA15_FUNC_HDMI_CEC>; + slew-rate = <0>; + drive-open-drain; + bias-disable; + }; + }; + usart1_pins_a: usart1@0 { pins1 { pinmux = <STM32F746_PA9_FUNC_USART1_TX>; @@ -380,6 +398,39 @@ assigned-clocks = <&rcc 1 CLK_HSE_RTC>; assigned-clock-rates = <1000000>; }; + + dma1: dma@40026000 { + compatible = "st,stm32-dma"; + reg = <0x40026000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA1)>; + #dma-cells = <4>; + status = "disabled"; + }; + + dma2: dma@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA2)>; + #dma-cells = <4>; + st,mem2mem; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 166728aeb166..4463ca13a740 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -63,6 +63,12 @@ }; +&cec { + pinctrl-0 = <&cec_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + &clk_hse { clock-frequency = <25000000>; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 36a99db0a3b4..58ec2275181e 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -59,6 +59,45 @@ }; soc { + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&timer_clk>; + }; + + usart2: serial@40004400 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + status = "disabled"; + clocks = <&timer_clk>; + }; + + dac: dac@40007400 { + compatible = "st,stm32h7-dac-core"; + reg = <0x40007400 0x400>; + clocks = <&timer_clk>; + clock-names = "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dac1: dac@1 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <1>; + status = "disabled"; + }; + + dac2: dac@2 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <2>; + status = "disabled"; + }; + }; + usart1: serial@40011000 { compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40011000 0x400>; @@ -68,19 +107,91 @@ }; - usart2: serial@40004400 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; - reg = <0x40004400 0x400>; - interrupts = <38>; + dma1: dma@40020000 { + compatible = "st,stm32-dma"; + reg = <0x40020000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; status = "disabled"; + }; + + dma2: dma@40020400 { + compatible = "st,stm32-dma"; + reg = <0x40020400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; + status = "disabled"; }; - timer5: timer@40000c00 { - compatible = "st,stm32-timer"; - reg = <0x40000c00 0x400>; - interrupts = <50>; + adc_12: adc@40022000 { + compatible = "st,stm32h7-adc-core"; + reg = <0x40022000 0x400>; + interrupts = <18>; + clocks = <&timer_clk>; + clock-names = "bus"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32h7-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc_12>; + interrupts = <0>; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32h7-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + interrupt-parent = <&adc_12>; + interrupts = <1>; + status = "disabled"; + }; + }; + + adc_3: adc@58026000 { + compatible = "st,stm32h7-adc-core"; + reg = <0x58026000 0x400>; + interrupts = <127>; clocks = <&timer_clk>; + clock-names = "bus"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc3: adc@0 { + compatible = "st,stm32h7-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc_3>; + interrupts = <0>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index c6effbb36e4a..6c07786e7ddb 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -60,6 +60,24 @@ aliases { serial0 = &usart1; }; + + vdda: regulator-vdda { + compatible = "regulator-fixed"; + regulator-name = "vdda"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&adc_12 { + vref-supply = <&vdda>; + status = "okay"; + adc1: adc@0 { + /* potentiometer */ + st,adc-channels = <0>; + status = "okay"; + }; }; &clk_hse { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index aebc3f9dc7b6..b147cb0dc14b 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -1155,11 +1155,11 @@ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; - nmi_intc: interrupt-controller@01f00c0c { - compatible = "allwinner,sun6i-a31-sc-nmi"; + nmi_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; - reg = <0x01f00c0c 0x38>; + reg = <0x01f00c00 0x400>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index bb510187602c..852a0aa24dce 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -271,6 +271,10 @@ status = "okay"; }; +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index a8b978d0f35b..ea50dda75adc 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -519,11 +519,11 @@ #clock-cells = <1>; }; - nmi_intc: interrupt-controller@01f00c0c { - compatible = "allwinner,sun6i-a31-sc-nmi"; + nmi_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; - reg = <0x01f00c0c 0x38>; + reg = <0x01f00c00 0x400>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index aecdeeb368ed..1f0d60afb25b 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -43,6 +43,7 @@ /dts-v1/; #include "sun8i-a83t.dtsi" +#include "sunxi-common-regulators.dtsi" / { model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; @@ -57,8 +58,92 @@ }; }; +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v0>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + bus-width = <4>; + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + status = "okay"; +}; + +®_usb1_vbus { + gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp81x: pmic@3a3 { + compatible = "x-powers,axp818", "x-powers,axp813"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts new file mode 100644 index 000000000000..2bafd7e99ef7 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -0,0 +1,148 @@ +/* + * Copyright 2017 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Banana Pi BPI-M3"; + compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ + status = "okay"; + + /* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */ +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp81x: pmic@3a3 { + compatible = "x-powers,axp813"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; +}; + +®_usb1_vbus { + gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + status = "okay"; +}; + +®_vcc3v0 { + status = "disabled"; +}; + +®_vcc5v0 { + status = "disabled"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index cff33454fc24..716a205c6dbb 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -44,6 +44,7 @@ /dts-v1/; #include "sun8i-a83t.dtsi" +#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -83,6 +84,17 @@ }; }; + usb-hub { + /* I2C is not connected */ + compatible = "smsc,usb3503"; + initial-mode = <1>; /* initialize in HUB mode */ + disabled-ports = <1>; + intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + refclk-frequency = <19200000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "On-board SPDIF"; @@ -102,6 +114,89 @@ }; }; +&ehci0 { + /* GL830 USB-to-SATA bridge here */ + status = "okay"; +}; + +&ehci1 { + /* USB3503 HSIC USB 2.0 hub here */ + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp81x: pmic@3a3 { + compatible = "x-powers,axp818", "x-powers,axp813"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; +}; + +®_usb1_vbus { + gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */ + status = "okay"; +}; + +®_usb2_vbus { + gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + status = "okay"; +}; + +®_vcc3v0 { + status = "disabled"; +}; + +®_vcc5v0 { + status = "disabled"; +}; + &spdif { status = "okay"; }; @@ -111,3 +206,9 @@ pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 19a8f4fcfab5..f996bd343e50 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/clock/sun8i-a83t-ccu.h> #include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/reset/sun8i-a83t-ccu.h> +#include <dt-bindings/reset/sun8i-r-ccu.h> / { interrupt-parent = <&gic>; @@ -182,6 +183,141 @@ #dma-cells = <1>; }; + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun8i-a83t-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,sun8i-a83t-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@1c11000 { + compatible = "allwinner,sun8i-a83t-emmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-a83t-musb", + "allwinner,sun8i-a33-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@1c19400 { + compatible = "allwinner,sun8i-a83t-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x14>, + <0x01c1b800 0x14>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_HSIC>, + <&ccu CLK_USB_HSIC_12M>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb2_hsic_12M"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_HSIC>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@1c1a000 { + compatible = "allwinner,sun8i-a83t-ehci", + "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI0>; + resets = <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@1c1a400 { + compatible = "allwinner,sun8i-a83t-ohci", + "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci1: usb@1c1b000 { + compatible = "allwinner,sun8i-a83t-ehci", + "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI1>; + resets = <&ccu RST_BUS_EHCI1>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,sun8i-a83t-ccu"; reg = <0x01c20000 0x400>; @@ -212,6 +348,15 @@ bias-pull-up; }; + mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { + pins = "PC5", "PC6", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + spdif_tx_pin: spdif-tx-pin { pins = "PE18"; function = "spdif"; @@ -281,6 +426,15 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; + r_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun8i-a83t-r-intc", + "allwinner,sun6i-a31-r-intc"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c00 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-a83t-r-ccu"; reg = <0x01f01400 0x400>; @@ -302,6 +456,28 @@ #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; + + r_rsb_pins: r-rsb-pins { + pins = "PL0", "PL1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; + }; + }; + + r_rsb: rsb@1f03400 { + compatible = "allwinner,sun8i-a83t-rsb", + "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_APB0_RSB>; + clock-frequency = <3000000>; + resets = <&r_ccu RST_APB0_RSB>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index e7fae65eb5d3..10da56e86ab8 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -100,6 +100,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -147,10 +151,19 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&spdif_tx_pins_a>; @@ -163,7 +176,14 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is on as long as VCC-IO is on */ + /* USB VBUS is always on except for the OTG port */ status = "okay"; + usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */ + usb0_vbus-supply = <®_usb0_vbus>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts new file mode 100644 index 000000000000..eaf09666720d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -0,0 +1,321 @@ +/* + * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "BananaPi M2 Magic"; + compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "bpi-m2m:blue:usr"; + gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; + }; + + green { + label = "bpi-m2m:green:usr"; + gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; + }; + + red { + label = "bpi-m2m:red:power"; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ + }; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&cpu0_opp_table { + opp@1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; +}; + +&dai { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +/* This is the i2c bus exposed on the DSI connector for the touch panel */ +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "disabled"; +}; + +/* This is the i2c bus exposed on the GPIO header */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + +/* This is the i2c bus exposed on the CSI connector to control the sensor */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp223.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +/* + * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same + * time, with the two being in sync. Since this is not really + * supported right now, just use the two as always on, and we will fix + * it later. + */ +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi0"; +}; + +®_dldo2 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi1"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&sound { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 1444fbd543e7..5af4dd321952 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1122,6 +1122,16 @@ non-removable; }; + usb@7d000000 { + compatible = "nvidia,tegra114-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@7d000000 { + status = "okay"; + }; + usb@7d008000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 7bacb2954f58..61873d642a45 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1722,7 +1722,7 @@ lanes { usb2-0 { - nvidia,function = "xusb"; + nvidia,function = "snps"; status = "okay"; }; @@ -1829,6 +1829,16 @@ }; }; + usb@7d000000 { + compatible = "nvidia,tegra124-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@7d000000 { + status = "okay"; + }; + /* mini-PCIe USB */ usb@7d004000 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 1b10b14a6abd..8baf00b89efb 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -87,6 +87,7 @@ clocks = <&tegra_car TEGRA124_CLK_HOST1X>; resets = <&tegra_car 28>; reset-names = "host1x"; + iommus = <&mc TEGRA_SWGROUP_HC>; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index b4bfa5586c23..bfa9421fcf94 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -452,7 +452,9 @@ }; usb@c5000000 { + compatible = "nvidia,tegra20-udc"; status = "okay"; + dr_mode = "peripheral"; }; usb-phy@c5000000 { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 4f41b18d9547..3e104ddeb220 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1927,6 +1927,16 @@ non-removable; }; + usb@7d000000 { + compatible = "nvidia,tegra30-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@7d000000 { + status = "okay"; + }; + usb@7d004000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi index 02de56b55823..399baaa0a2ab 100644 --- a/arch/arm/boot/dts/tps65217.dtsi +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -18,11 +18,14 @@ charger { compatible = "ti,tps65217-charger"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; status = "disabled"; }; pwrbutton { compatible = "ti,tps65217-pwrbutton"; + interrupts = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index 4817ebb28eb2..b3aaab354f3e 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld4.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld4.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD4 Reference Board"; @@ -64,3 +64,7 @@ &usb1 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index fb2fd9605b9d..79183db5b386 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -270,6 +270,13 @@ interrupt-controller; }; + aidet: aidet@61830000 { + compatible = "socionext,uniphier-ld4-aidet"; + reg = <0x61830000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + sysctrl@61840000 { compatible = "socionext,uniphier-ld4-sysctrl", "simple-mfd", "syscon"; @@ -285,7 +292,18 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5a"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 96db4abc02c3..2188d114d79b 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld6b.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld6b.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD6b Reference Board"; @@ -58,3 +58,7 @@ &i2c0 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi index 8b9a79731bd3..9a7b25cc8233 100644 --- a/arch/arm/boot/dts/uniphier-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi @@ -12,7 +12,7 @@ * The D-chip (digital chip) is the same as the PXs2 die. * Reuse the PXs2 device tree with some properties overridden. */ -/include/ "uniphier-pxs2.dtsi" +#include "uniphier-pxs2.dtsi" / { compatible = "socionext,uniphier-ld6b"; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index 246f35ffb638..be82cddc4072 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -4,51 +4,35 @@ * Copyright (C) 2015-2017 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ &pinctrl { + pinctrl_aout: aout_grp { + groups = "aout"; + function = "aout"; + }; + pinctrl_emmc: emmc_grp { groups = "emmc", "emmc_dat8"; function = "emmc"; }; + pinctrl_ether_mii: ether_mii_grp { + groups = "ether_mii"; + function = "ether_mii"; + }; + + pinctrl_ether_rgmii: ether_rgmii_grp { + groups = "ether_rgmii"; + function = "ether_rgmii"; + }; + + pinctrl_ether_rmii: ether_rmii_grp { + groups = "ether_rmii"; + function = "ether_rmii"; + }; + pinctrl_i2c0: i2c0_grp { groups = "i2c0"; function = "i2c0"; diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 11690b57931c..089419cee273 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pro4.dtsi" +#include "uniphier-pro4.dtsi" / { model = "UniPhier Pro4 Ace Board"; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 4cf539245f2e..903df6348e77 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-pro4.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-pro4.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier Pro4 Reference Board"; @@ -66,3 +66,7 @@ &usb3 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index 2763cebcd76a..adef212b45b2 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pro4.dtsi" +#include "uniphier-pro4.dtsi" / { model = "UniPhier Pro4 Sanji Board"; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 37400becf4ba..b3dbbd9b6e39 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -268,6 +268,13 @@ }; }; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pro4-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; @@ -305,7 +312,18 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5a"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + clocks = <&sys_clk 2>; + }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 9577769a0add..b026bcd42a06 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { @@ -328,7 +292,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-pro5-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; sd_clk: clock { compatible = "socionext,uniphier-pro5-sd-clock"; @@ -367,6 +331,13 @@ }; }; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pro5-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; @@ -404,7 +375,18 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5b"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 81560f75bfa7..7dfae2667f50 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pxs2.dtsi" +#include "uniphier-pxs2.dtsi" / { model = "UniPhier PXs2 Gentil Board"; diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index dc2d0579c666..0cf615463a82 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "uniphier-pxs2.dtsi" +#include "uniphier-pxs2.dtsi" / { model = "UniPhier PXs2 Vodka Board"; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index bace751d4023..90b020c95083 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -276,7 +276,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-pxs2-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; sd_clk: clock { compatible = "socionext,uniphier-pxs2-sd-clock"; @@ -315,6 +315,13 @@ }; }; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pxs2-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; @@ -352,7 +359,18 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5b"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts deleted file mode 100644 index 70cda39a3dd2..000000000000 --- a/arch/arm/boot/dts/uniphier-sld3-ref.dts +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Device Tree Source for UniPhier sLD3 Reference Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ - -/dts-v1/; -/include/ "uniphier-sld3.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" - -/ { - model = "UniPhier sLD3 Reference Board"; - compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - }; - - memory@8000000 { - device_type = "memory"; - reg = <0x80000000 0x20000000 - 0xc0000000 0x20000000>; - }; -}; - -ðsc { - interrupts = <0 49 4>; -}; - -&serial0 { - status = "okay"; -}; - -&serial1 { - status = "okay"; -}; - -&serial2 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi deleted file mode 100644 index 408287936613..000000000000 --- a/arch/arm/boot/dts/uniphier-sld3.dtsi +++ /dev/null @@ -1,260 +0,0 @@ -/* - * Device Tree Source for UniPhier sLD3 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ - -/ { - compatible = "socionext,uniphier-sld3"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - enable-method = "psci"; - next-level-cache = <&l2>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - enable-method = "psci"; - next-level-cache = <&l2>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - clocks { - refclk: ref { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24576000>; - }; - - arm_timer_clk: arm_timer_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - timer@20000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x20000200 0x20>; - interrupts = <1 11 0x304>; - clocks = <&arm_timer_clk>; - }; - - timer@20000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x20000600 0x20>; - interrupts = <1 13 0x304>; - clocks = <&arm_timer_clk>; - }; - - intc: interrupt-controller@20001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x20001000 0x1000>, - <0x20000100 0x100>; - }; - - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, - <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(512 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - interrupts = <0 33 4>; - clocks = <&sys_clk 0>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - interrupts = <0 35 4>; - clocks = <&sys_clk 0>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; - clocks = <&sys_clk 0>; - }; - - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58400000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 1>; - clocks = <&sys_clk 1>; - clock-frequency = <100000>; - }; - - i2c1: i2c@58480000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58480000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 1>; - clocks = <&sys_clk 1>; - clock-frequency = <100000>; - }; - - i2c2: i2c@58500000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58500000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 1>; - clocks = <&sys_clk 1>; - clock-frequency = <100000>; - }; - - i2c3: i2c@58580000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58580000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 1>; - clocks = <&sys_clk 1>; - clock-frequency = <100000>; - }; - - /* chip-internal connection for DMD */ - i2c4: i2c@58600000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58600000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 45 1>; - clocks = <&sys_clk 1>; - clock-frequency = <400000>; - }; - - system_bus: system-bus@58c00000 { - compatible = "socionext,uniphier-system-bus"; - status = "disabled"; - reg = <0x58c00000 0x400>; - #address-cells = <2>; - #size-cells = <1>; - }; - - smpctrl@59801000 { - compatible = "socionext,uniphier-smpctrl"; - reg = <0x59801000 0x400>; - }; - - mioctrl@59810000 { - compatible = "socionext,uniphier-sld3-mioctrl", - "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; - - mio_clk: clock { - compatible = "socionext,uniphier-sld3-mio-clock"; - #clock-cells = <1>; - }; - - mio_rst: reset { - compatible = "socionext,uniphier-sld3-mio-reset"; - #reset-cells = <1>; - }; - }; - - usb0: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; - clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, - <&mio_rst 12>; - }; - - usb1: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; - clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, - <&mio_rst 13>; - }; - - usb2: usb@5a820100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; - clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; - resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, - <&mio_rst 14>; - }; - - usb3: usb@5a830100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a830100 0x100>; - interrupts = <0 83 4>; - clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>; - resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>, - <&mio_rst 15>; - }; - - sysctrl@f1840000 { - compatible = "socionext,uniphier-sld3-sysctrl", - "simple-mfd", "syscon"; - reg = <0xf1840000 0x10000>; - - sys_clk: clock { - compatible = "socionext,uniphier-sld3-clock"; - #clock-cells = <1>; - }; - - sys_rst: reset { - compatible = "socionext,uniphier-sld3-reset"; - #reset-cells = <1>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 4536d5b71297..5accd3cc76e4 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-sld8.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-sld8.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier sLD8 Reference Board"; @@ -68,3 +68,7 @@ &usb2 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 9fb9167f2db4..b08390332971 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -270,6 +270,13 @@ interrupt-controller; }; + aidet: aidet@61830000 { + compatible = "socionext,uniphier-sld8-aidet"; + reg = <0x61830000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + sysctrl@61840000 { compatible = "socionext,uniphier-sld8-sysctrl", "simple-mfd", "syscon"; @@ -285,7 +292,18 @@ #reset-cells = <1>; }; }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5a"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand2cs>; + clocks = <&sys_clk 2>; + }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 06e2331f666d..9abe26028c8b 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -39,7 +39,7 @@ clock-names = "apb_pclk"; }; - pci-controller@10001000 { + pci@10001000 { compatible = "arm,versatile-pci"; device_type = "pci"; reg = <0x10001000 0x1000 diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts index 081f980cfbe6..b0183c3a1d7c 100644 --- a/arch/arm/boot/dts/zx296702-ad1.dts +++ b/arch/arm/boot/dts/zx296702-ad1.dts @@ -18,7 +18,6 @@ }; &mmc0 { - num-slots = <1>; supports-highspeed; non-removable; disable-wp; @@ -31,7 +30,6 @@ }; &mmc1 { - num-slots = <1>; supports-highspeed; non-removable; disable-wp; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index f3ac9bfe580e..0f79fe1ccd9d 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -42,6 +42,14 @@ }; }; + fpga_full: fpga-full { + compatible = "fpga-region"; + fpga-mgr = <&devcfg>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + pmu@f8891000 { compatible = "arm,cortex-a9-pmu"; interrupts = <0 5 4>, <0 6 4>; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 64a6390fc501..0144acfa9793 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -34,7 +34,7 @@ }; chosen { - bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; stdout-path = "serial0:115200n8"; }; }; @@ -54,6 +54,7 @@ compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; reg = <0>; + device_type = "ethernet-phy"; marvell,reg-init = <0x3 0x10 0xff00 0x1e>, <0x3 0x11 0xfff0 0xa>; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 0cdad2cc8b78..34e8277fce0d 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -12,7 +12,7 @@ * GNU General Public License for more details. */ /dts-v1/; -/include/ "zynq-7000.dtsi" +#include "zynq-7000.dtsi" / { model = "Zynq ZC702 Development Board"; @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlycon"; + bootargs = ""; stdout-path = "serial0:115200n8"; }; @@ -97,6 +97,7 @@ ethernet_phy: ethernet-phy@7 { reg = <7>; + device_type = "ethernet-phy"; }; }; @@ -131,6 +132,21 @@ }; }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + adv7511: hdmi-tx@39 { + compatible = "adi,adv7511"; + reg = <0x39>; + adi,input-depth = <8>; + adi,input-colorspace = "yuv422"; + adi,input-clock = "1x"; + adi,input-style = <3>; + adi,input-justification = "right"; + }; + }; + i2c@2 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index ad4bb06dba25..7ebc8c5ae39d 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -12,7 +12,7 @@ * GNU General Public License for more details. */ /dts-v1/; -/include/ "zynq-7000.dtsi" +#include "zynq-7000.dtsi" / { model = "Zynq ZC706 Development Board"; @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlycon"; + bootargs = ""; stdout-path = "serial0:115200n8"; }; @@ -53,6 +53,7 @@ ethernet_phy: ethernet-phy@7 { reg = <7>; + device_type = "ethernet-phy"; }; }; @@ -87,6 +88,21 @@ }; }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + adv7511: hdmi-tx@39 { + compatible = "adi,adv7511"; + reg = <0x39>; + adi,input-depth = <8>; + adi,input-colorspace = "yuv422"; + adi,input-clock = "1x"; + adi,input-style = <3>; + adi,input-justification = "evenly"; + }; + }; + i2c@2 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 325379f7983c..5e44dc12fd60 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -12,7 +12,7 @@ * GNU General Public License for more details. */ /dts-v1/; -/include/ "zynq-7000.dtsi" +#include "zynq-7000.dtsi" / { model = "Zynq Zed Development Board"; @@ -29,7 +29,7 @@ }; chosen { - bootargs = "earlycon"; + bootargs = ""; stdout-path = "serial0:115200n8"; }; @@ -50,6 +50,7 @@ ethernet_phy: ethernet-phy@0 { reg = <0>; + device_type = "ethernet-phy"; }; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index 590ec24b8749..e40cafc5ee5b 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -12,7 +12,7 @@ * GNU General Public License for more details. */ /dts-v1/; -/include/ "zynq-7000.dtsi" +#include "zynq-7000.dtsi" / { model = "Zynq ZYBO Development Board"; @@ -29,7 +29,7 @@ }; chosen { - bootargs = "earlycon"; + bootargs = ""; stdout-path = "serial0:115200n8"; }; @@ -51,6 +51,7 @@ ethernet_phy: ethernet-phy@0 { reg = <0>; + device_type = "ethernet-phy"; }; }; diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index b65a7e876a26..6b54ee8c1262 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -184,6 +184,12 @@ config ARCH_R8A7796 help This enables support for the Renesas R-Car M3-W SoC. +config ARCH_R8A77995 + bool "Renesas R-Car D3 SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas R-Car D3 SoC. + config ARCH_STRATIX10 bool "Altera's Stratix 10 SoCFPGA Family" help diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 108f12ce6d1d..19c3fbd75eda 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,4 +1,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi new file mode 100644 index 000000000000..ff8af52743ff --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -0,0 +1,150 @@ +/* + * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP803 Integrated Power Management Chip + * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf + */ + +&axp803 { + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <3000>; + + reg_aldo1: aldo1 { + regulator-name = "aldo1"; + }; + + reg_aldo2: aldo2 { + regulator-name = "aldo2"; + }; + + reg_aldo3: aldo3 { + regulator-name = "aldo3"; + }; + + reg_dc1sw: dc1sw { + regulator-name = "dc1sw"; + }; + + reg_dcdc1: dcdc1 { + regulator-name = "dcdc1"; + }; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_dcdc4: dcdc4 { + regulator-name = "dcdc4"; + }; + + reg_dcdc5: dcdc5 { + regulator-name = "dcdc5"; + }; + + reg_dcdc6: dcdc6 { + regulator-name = "dcdc6"; + }; + + reg_dldo1: dldo1 { + regulator-name = "dldo1"; + }; + + reg_dldo2: dldo2 { + regulator-name = "dldo2"; + }; + + reg_dldo3: dldo3 { + regulator-name = "dldo3"; + }; + + reg_dldo4: dldo4 { + regulator-name = "dldo4"; + }; + + reg_eldo1: eldo1 { + regulator-name = "eldo1"; + }; + + reg_eldo2: eldo2 { + regulator-name = "eldo2"; + }; + + reg_eldo3: eldo3 { + regulator-name = "eldo3"; + }; + + reg_fldo1: fldo1 { + regulator-name = "fldo1"; + }; + + reg_fldo2: fldo2 { + regulator-name = "fldo2"; + }; + + reg_ldo_io0: ldo-io0 { + regulator-name = "ldo-io0"; + status = "disabled"; + }; + + reg_ldo_io1: ldo-io1 { + regulator-name = "ldo-io1"; + status = "disabled"; + }; + + reg_rtc_ldo: rtc-ldo { + /* RTC_LDO is a fixed, always-on regulator */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "rtc-ldo"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 6872135d7f84..d347f52e27f6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -59,14 +59,16 @@ stdout-path = "serial0:115200n8"; }; - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; }; +&ehci1 { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -80,7 +82,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-inverted; disable-wp; @@ -91,22 +93,143 @@ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; }; &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; status = "okay"; }; +&ohci1 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-phy"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -118,3 +241,7 @@ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts new file mode 100644 index 000000000000..2beef9e6cb88 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -0,0 +1,207 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "FriendlyARM NanoPi A64"; + compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +/* i2c1 connected with gpio headers like pine64, bananapi */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; +}; + +&i2c1_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi"; +}; + +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg-wifi-io"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts new file mode 100644 index 000000000000..338e786155b1 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -0,0 +1,199 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Olimex A64-Olinuxino"; + compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-ddr3"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dvdd-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 7c533b6d4ba9..caf8b6fbe5e3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -107,6 +107,118 @@ status = "okay"; }; +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-phy"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +/* + * The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can + * work at 1.35V with less power consumption. + * As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead. + */ +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + /* On Exp and Euler connectors */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index d891a1a27f6c..17ccc12b58df 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -95,6 +95,28 @@ status = "okay"; }; +®_dc1sw { + regulator-name = "vcc-phy"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 475518b031dd..a5da18a6f286 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -63,3 +63,89 @@ bus-width = <4>; status = "okay"; }; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-1v8-lpddr"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 68aadc9b96dc..8c8db1b057df 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -467,6 +467,15 @@ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; + r_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun50i-a64-r-intc", + "allwinner,sun6i-a31-r-intc"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c00 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index dc478d094c11..c89010e56488 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -121,6 +121,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 738ed689ff69..f175db846286 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -225,7 +225,7 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x84c0 0x0 0x14>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>; @@ -233,7 +233,7 @@ }; uart_B: serial@84dc { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x84dc 0x0 0x14>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>; @@ -279,7 +279,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x8700 0x0 0x14>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>; @@ -367,26 +367,40 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - clkc_AO: clock-controller@040 { - compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; - reg = <0x0 0x00040 0x0 0x4>; - #clock-cells = <1>; - #reset-cells = <1>; + sysctrl_AO: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; }; uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; status = "disabled"; }; uart_AO_B: serial@4e0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; reg = <0x0 0x004e0 0x0 0x14>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; status = "disabled"; }; @@ -437,9 +451,9 @@ mailbox: mailbox@404 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; - interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, - <0 209 IRQ_TYPE_EDGE_RISING>, - <0 210 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; #mbox-cells = <1>; }; }; @@ -448,7 +462,7 @@ compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; - interrupts = <0 8 1>; + interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index fa462831ccaf..9697a7a79464 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -175,6 +175,64 @@ pinctrl-names = "default"; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In", + "VCCK En", "CON1 Header Pin31", + "I2S Header Pin6", "IR In", "I2S Header Pin7", + "I2S Header Pin3", "I2S Header Pin4", + "I2S Header Pin5", "HDMI CEC", "SYS LED"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", + "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", + "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En", + "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3", + "Eth PHY nRESET", "Eth PHY Intc", + /* Bank GPIOH */ + "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", + "CON1 Header Pin33", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4", + "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk", + "eMMC Reset", "eMMC CMD", + "", "", "", "", "eMMC DS", + "", "", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", + "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", + "VDDEE Regulator", "VCCK Regulator", + /* Bank GPIOY */ + "CON1 Header Pin7", "CON1 Header Pin11", + "CON1 Header Pin13", "CON1 Header Pin15", + "CON1 Header Pin18", "CON1 Header Pin19", + "CON1 Header Pin22", "CON1 Header Pin21", + "CON1 Header Pin24", "CON1 Header Pin23", + "CON1 Header Pin26", "CON1 Header Pin29", + "CON1 Header Pin32", "CON1 Header Pin8", + "CON1 Header Pin10", "CON1 Header Pin16", + "CON1 Header Pin12", + /* Bank GPIOX */ + "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", + "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", + "WIFI Power Enable", "WIFI WAKE HOST", + "Bluetooth PCM DOUT", "Bluetooth PCM DIN", + "Bluetooth PCM SYNC", "Bluetooth PCM CLK", + "Bluetooth UART TX", "Bluetooth UART RX", + "Bluetooth UART CTS", "Bluetooth UART RTS", + "", "", "", "WIFI 32K", "Bluetooth Enable", + "Bluetooth WAKE HOST", + /* Bank GPIOCLK */ + "", "CON1 Header Pin35", "", "", + /* GPIO_TEST_N */ + ""; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index a1078b3e1c76..9c59c3c6d1b6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -171,6 +171,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + ðmac { status = "okay"; pinctrl-0 = <ð_rmii_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index d904deb1018c..81ffc689a5bf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -84,6 +84,9 @@ /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ states = <1800000 0 3300000 1>; + + regulator-settling-time-up-us = <10000>; + regulator-settling-time-down-us = <150000>; }; vddio_boot: regulator-vddio_boot { @@ -148,6 +151,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index e76ac313fef9..f7144fd5e03f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -108,6 +108,12 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; &cvbs_vdac_port { cvbs_vdac_out: endpoint { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 17d3efdf1469..52f1687e7a09 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -307,6 +307,15 @@ }; }; +&cec_AO { + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; +}; + +&clkc_AO { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, @@ -682,6 +691,31 @@ clocks = <&clkc CLKID_SPI>; }; +&uart_A { + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO_B { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 3e0c023d6abd..6827f235d7cf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -97,6 +97,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + /* P230 has exclusive choice between internal or external PHY */ ðmac { pinctrl-0 = <ð_pins>; @@ -124,7 +131,6 @@ }; }; - &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 94567eb17875..edc512ad0bac 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -67,6 +67,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -105,6 +112,62 @@ linux,rc-map-name = "rc-geekbox"; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", + "UART RX", + "Power Key In", + "J9 Header Pin35", + "J9 Header Pin16", + "J9 Header Pin15", + "J9 Header Pin33", + "IR In", + "HDMI CEC", + "SYS LED"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "Power OFF", + "VCCK Enable", + /* Bank GPIOH */ + "HDMI HPD", "HDMI SDA", "HDMI SCL", + "HDMI_5V_EN", "SPDIF", + "J9 Header Pin37", + "J9 Header Pin30", + "J9 Header Pin29", + "J9 Header Pin32", + "J9 Header Pin31", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", + "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", + "eMMC Clk", "eMMC Reset", "eMMC CMD", + "", "BOOT_MODE", "", "", "eMMC Data Strobe", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", + "VCCK Regulator", "VDDEE Regulator", + /* Bank GPIOX */ + "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", + "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", + "WIFI Power Enable", "WIFI WAKE HOST", + "Bluetooth PCM DOUT", "Bluetooth PCM DIN", + "Bluetooth PCM SYNC", "Bluetooth PCM CLK", + "Bluetooth UART TX", "Bluetooth UART RX", + "Bluetooth UART CTS", "Bluetooth UART RTS", + "WIFI 32K", "Bluetooth Enable", + "Bluetooth WAKE HOST", + /* Bank GPIOCLK */ + "", "J9 Header Pin39", + /* GPIO_TEST_N */ + ""; +}; + &pwm_AO_ab { status = "okay"; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 266fbcf3e47f..69ca14ac10fa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -101,6 +101,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -129,6 +136,63 @@ }; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", + "UART RX", + "Blue LED", + "SDCard Voltage Switch", + "7J1 Header Pin5", + "7J1 Header Pin3", + "7J1 Header Pin12", + "IR In", + "9J3 Switch HDMI CEC/7J1 Header Pin11", + "7J1 Header Pin13"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "Eth Link LED", "Eth Activity LED", + /* Bank GPIOH */ + "HDMI HPD", "HDMI SDA", "HDMI SCL", + "HDMI_5V_EN", "9J1 Header Pin2", + "Analog Audio Mute", + "2J3 Header Pin6", + "2J3 Header Pin5", + "2J3 Header Pin4", + "2J3 Header Pin3", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", + "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", + "eMMC Clk", "eMMC Reset", "eMMC CMD", + "ALT BOOT MODE", "", "", "", "eMMC Data Strobe", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + "Green LED", "VCCK Enable", + "7J1 Header Pin27", "7J1 Header Pin28", + "VCCK Regulator", "VDDEE Regulator", + /* Bank GPIOX */ + "7J1 Header Pin22", "7J1 Header Pin26", + "7J1 Header Pin36", "7J1 Header Pin38", + "7J1 Header Pin40", "7J1 Header Pin37", + "7J1 Header Pin33", "7J1 Header Pin35", + "7J1 Header Pin19", "7J1 Header Pin21", + "7J1 Header Pin24", "7J1 Header Pin23", + "7J1 Header Pin8", "7J1 Header Pin10", + "7J1 Header Pin16", "7J1 Header Pin18", + "7J1 Header Pin32", "7J1 Header Pin29", + "7J1 Header Pin31", + /* Bank GPIOCLK */ + "7J1 Header Pin7", "", + /* GPIO_TEST_N */ + "7J1 Header Pin15"; +}; + /* SD card */ &sd_emmc_b { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 6633a5d8fdd3..4c2ac7650fcd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -140,6 +140,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 6ab17c1eeefd..6e2bf858291c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -71,6 +71,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 8d4f3160a0ee..d6876e64979e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -43,6 +43,7 @@ #include "meson-gx.dtsi" #include <dt-bindings/clock/gxbb-clkc.h> +#include <dt-bindings/clock/gxbb-aoclkc.h> #include <dt-bindings/gpio/meson-gxl-gpio.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> @@ -207,6 +208,15 @@ }; }; +&cec_AO { + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; +}; + +&clkc_AO { + compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + &hdmi_tx { compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; resets = <&reset RESET_HDMITX_CAPB3>, @@ -623,6 +633,31 @@ clocks = <&clkc CLKID_SPI>; }; +&uart_A { + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + +&uart_AO { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO_B { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 5f626d683088..9b10c5f4f8c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -113,6 +113,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index fe451cce93e7..19a798d2ae2f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -117,6 +117,10 @@ }; }; +&clkc_AO { + compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + &saradc { compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc"; }; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 72720e9132a1..c9ffffb96e43 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -626,6 +626,7 @@ 0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4 @@ -651,6 +652,7 @@ 0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4 diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 63be8e51eaa8..c09a36fed917 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -626,6 +626,7 @@ 0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4 @@ -651,6 +652,7 @@ 0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4 @@ -676,6 +678,7 @@ 0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4 @@ -701,6 +704,7 @@ 0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4 @@ -726,6 +730,7 @@ 0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4 diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 7cfa8e414e7f..8ecdd4331980 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -226,7 +226,7 @@ clock-names = "uartclk", "apb_pclk"; }; - virtio_block@0130000 { + virtio-block@0130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index e8b7413ec890..fbafe62d6b22 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -201,7 +201,7 @@ }; }; - cpu_debug0: cpu_debug@22010000 { + cpu_debug0: cpu-debug@22010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x22010000 0x0 0x1000>; @@ -260,7 +260,7 @@ }; }; - cpu_debug1: cpu_debug@22110000 { + cpu_debug1: cpu-debug@22110000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x22110000 0x0 0x1000>; @@ -283,7 +283,7 @@ }; }; - cpu_debug2: cpu_debug@23010000 { + cpu_debug2: cpu-debug@23010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23010000 0x0 0x1000>; @@ -356,7 +356,7 @@ }; }; - cpu_debug3: cpu_debug@23110000 { + cpu_debug3: cpu-debug@23110000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23110000 0x0 0x1000>; @@ -379,7 +379,7 @@ }; }; - cpu_debug4: cpu_debug@23210000 { + cpu_debug4: cpu-debug@23210000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23210000 0x0 0x1000>; @@ -402,7 +402,7 @@ }; }; - cpu_debug5: cpu_debug@23310000 { + cpu_debug5: cpu-debug@23310000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23310000 0x0 0x1000>; @@ -426,7 +426,7 @@ }; replicator@20120000 { - compatible = "qcom,coresight-replicator1x", "arm,primecell"; + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0 0x20120000 0 0x1000>; clocks = <&soc_smc50mhz>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 161ac98418a3..528875c75598 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -219,7 +219,7 @@ }; }; - virtio_block@0130000 { + virtio-block@0130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index f11bdd6689ea..3eaef3895d66 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,7 +1,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb -dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb -dts-dirs := stingray +dts-dirs += northstar2 +dts-dirs += stingray always := $(dtb-y) subdir-y := $(dts-dirs) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi deleted file mode 120000 index 3937b77cb310..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi +++ /dev/null @@ -1 +0,0 @@ -../../../../arm/boot/dts/bcm2835-rpi.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts index 972f14db28ac..699d340a3437 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -1,41 +1 @@ -/dts-v1/; -#include "bcm2837.dtsi" -#include "bcm2835-rpi.dtsi" -#include "bcm283x-rpi-smsc9514.dtsi" -#include "bcm283x-rpi-usb-host.dtsi" - -/ { - compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; - model = "Raspberry Pi 3 Model B"; - - memory { - reg = <0 0x40000000>; - }; - - leds { - act { - gpios = <&gpio 47 0>; - }; - }; -}; - -&uart1 { - status = "okay"; -}; - -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; -}; - -/* SDHOST is used to drive the SD card */ -&sdhost { - pinctrl-names = "default"; - pinctrl-0 = <&sdhost_gpio48>; - status = "okay"; - bus-width = <4>; -}; +#include "arm/bcm2837-rpi-3-b.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi deleted file mode 120000 index dca7c057d5a5..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi +++ /dev/null @@ -1 +0,0 @@ -../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi deleted file mode 120000 index cbeebe312ff8..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi +++ /dev/null @@ -1 +0,0 @@ -../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi deleted file mode 120000 index 5f54e4cab99b..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi +++ /dev/null @@ -1 +0,0 @@ -../../../../arm/boot/dts/bcm283x.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/broadcom/northstar2/Makefile b/arch/arm64/boot/dts/broadcom/northstar2/Makefile new file mode 100644 index 000000000000..e01a1485b813 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/northstar2/Makefile @@ -0,0 +1,6 @@ +dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb +dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi index 99009fdf10a4..99009fdf10a4 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts index ec19fbf928a1..ec19fbf928a1 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts index ab4ae1a32fab..ab4ae1a32fab 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 35c8457e3d1f..35c8457e3d1f 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 5dca7d10253b..8862ec907fd8 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -72,6 +72,78 @@ <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ }; +&sata0 { + status = "okay"; +}; + +&sata_phy0{ + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata_phy1{ + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata_phy2{ + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + +&sata_phy3{ + status = "okay"; +}; + +&sata4 { + status = "okay"; +}; + +&sata_phy4{ + status = "okay"; +}; + +&sata5 { + status = "okay"; +}; + +&sata_phy5{ + status = "okay"; +}; + +&sata6 { + status = "okay"; +}; + +&sata_phy6{ + status = "okay"; +}; + +&sata7 { + status = "okay"; +}; + +&sata_phy7{ + status = "okay"; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; +}; + &uart1 { status = "okay"; }; @@ -102,6 +174,12 @@ }; }; +&enet { + phy-mode = "rgmii-id"; + phy-handle = <&gphy0>; + status = "okay"; +}; + &nand { status = "ok"; nandcs@0 { diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index 5671669ba348..eb6f08cdbd79 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -39,6 +39,10 @@ model = "Stingray Combo SVK (BCM958742K)"; }; +&gphy0 { + enet-phy-lane-swap; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts index 6ebe399fda6a..5084b037320f 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -38,3 +38,7 @@ compatible = "brcm,bcm958742t", "brcm,stingray"; model = "Stingray SST100 (BCM958742T)"; }; + +&gphy0 { + enet-phy-lane-swap; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi new file mode 100644 index 000000000000..8bf1dc6b46ca --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi @@ -0,0 +1,118 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + fs4: fs4 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x67000000 0x00800000>; + + crypto_mbox: crypto_mbox@00000000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x00000000 0x200000>; + msi-parent = <&gic_its 0x4100>; + #mbox-cells = <3>; + dma-coherent; + }; + + raid_mbox: raid_mbox@00400000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x00400000 0x200000>; + dma-coherent; + msi-parent = <&gic_its 0x4300>; + #mbox-cells = <3>; + }; + + raid0: raid@0 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 0 0x1 0xff00>, + <&raid_mbox 1 0x1 0xff00>, + <&raid_mbox 2 0x1 0xff00>, + <&raid_mbox 3 0x1 0xff00>; + }; + + raid1: raid@1 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 4 0x1 0xff00>, + <&raid_mbox 5 0x1 0xff00>, + <&raid_mbox 6 0x1 0xff00>, + <&raid_mbox 7 0x1 0xff00>; + }; + + raid2: raid@2 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 8 0x1 0xff00>, + <&raid_mbox 9 0x1 0xff00>, + <&raid_mbox 10 0x1 0xff00>, + <&raid_mbox 11 0x1 0xff00>; + }; + + raid3: raid@3 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 12 0x1 0xff00>, + <&raid_mbox 13 0x1 0xff00>, + <&raid_mbox 14 0x1 0xff00>, + <&raid_mbox 15 0x1 0xff00>; + }; + + raid4: raid@4 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 16 0x1 0xff00>, + <&raid_mbox 17 0x1 0xff00>, + <&raid_mbox 18 0x1 0xff00>, + <&raid_mbox 19 0x1 0xff00>; + }; + + raid5: raid@5 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 20 0x1 0xff00>, + <&raid_mbox 21 0x1 0xff00>, + <&raid_mbox 22 0x1 0xff00>, + <&raid_mbox 23 0x1 0xff00>; + }; + + raid6: raid@6 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 24 0x1 0xff00>, + <&raid_mbox 25 0x1 0xff00>, + <&raid_mbox 26 0x1 0xff00>, + <&raid_mbox 27 0x1 0xff00>; + }; + + raid7: raid@7 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 28 0x1 0xff00>, + <&raid_mbox 29 0x1 0xff00>, + <&raid_mbox 30 0x1 0xff00>, + <&raid_mbox 31 0x1 0xff00>; + }; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi new file mode 100644 index 000000000000..a774709388df --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi @@ -0,0 +1,278 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + sata { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x67d00000 0x00800000>; + + sata0: ahci@00210000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00210000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0_port0: sata-port@0 { + reg = <0>; + phys = <&sata0_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy0: sata_phy@00212100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00212100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata1: ahci@00310000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00310000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata1_port0: sata-port@0 { + reg = <0>; + phys = <&sata1_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy1: sata_phy@00312100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00312100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata1_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata2: ahci@00120000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00120000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata2_port0: sata-port@0 { + reg = <0>; + phys = <&sata2_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy2: sata_phy@00122100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00122100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata2_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata3: ahci@00130000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00130000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata3_port0: sata-port@0 { + reg = <0>; + phys = <&sata3_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy3: sata_phy@00132100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00132100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata3_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata4: ahci@00330000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00330000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata4_port0: sata-port@0 { + reg = <0>; + phys = <&sata4_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy4: sata_phy@00332100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00332100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata4_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata5: ahci@00400000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00400000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata5_port0: sata-port@0 { + reg = <0>; + phys = <&sata5_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy5: sata_phy@00402100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00402100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata5_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata6: ahci@00410000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00410000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata6_port0: sata-port@0 { + reg = <0>; + phys = <&sata6_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy6: sata_phy@00412100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00412100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata6_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata7: ahci@00420000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00420000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata7_port0: sata-port@0 { + reg = <0>; + phys = <&sata7_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy7: sata_phy@00422100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00422100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata7_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 49933cf16c92..e6f75c633623 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -152,6 +152,12 @@ #size-cells = <1>; ranges = <0x0 0x0 0x61000000 0x05000000>; + ccn: ccn@00000000 { + compatible = "arm,ccn-502"; + reg = <0x00000000 0x900000>; + interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@02c00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -261,6 +267,9 @@ }; }; + #include "stingray-fs4.dtsi" + #include "stingray-sata.dtsi" + hsls { compatible = "simple-bus"; #address-cells = <1>; @@ -269,6 +278,37 @@ #include "stingray-pinctrl.dtsi" + mdio_mux_iproc: mdio-mux@0002023c { + compatible = "brcm,mdio-mux-iproc"; + reg = <0x0002023c 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { /* PCIe serdes */ + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@2 { /* SATA */ + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@3 { /* USB */ + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@10 { /* RGMII */ + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + pwm: pwm@00010000 { compatible = "brcm,iproc-pwm"; reg = <0x00010000 0x1000>; @@ -277,6 +317,93 @@ status = "disabled"; }; + timer0: timer@00030000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00030000 0x1000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer1: timer@00040000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00040000 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer2: timer@00050000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00050000 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer3: timer@00060000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00060000 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer4: timer@00070000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00070000 0x1000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer5: timer@00080000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00080000 0x1000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer6: timer@00090000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00090000 0x1000>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer7: timer@000a0000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x000a0000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + i2c0: i2c@000b0000 { compatible = "brcm,iproc-i2c"; reg = <0x000b0000 0x100>; @@ -424,6 +551,15 @@ iommus = <&smmu 0x6000 0x0000>; }; + enet: ethernet@00340000{ + compatible = "brcm,amac"; + reg = <0x00340000 0x1000>; + reg-names = "amac_base"; + dma-coherent; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + status= "disabled"; + }; + nand: nand@00360000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x00360000 0x600>, diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 105b2938082f..297597442c44 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -307,20 +307,6 @@ samsung,pll-clock-frequency = <24000000>; pinctrl-names = "default"; pinctrl-0 = <&te_irq>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - samsung,burst-clock-frequency = <512000000>; - samsung,esc-clock-frequency = <16000000>; - }; - }; - }; }; &hdmi { @@ -843,7 +829,6 @@ &mshc_0 { status = "okay"; - num-slots = <1>; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; @@ -865,7 +850,6 @@ &mshc_2 { status = "okay"; - num-slots = <1>; cap-sd-highspeed; disable-wp; cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; @@ -1210,8 +1194,9 @@ status = "okay"; }; -&usbdrd_dwc3_0 { +&usbdrd_dwc3 { dr_mode = "otg"; + extcon = <&muic>; }; &usbdrd30_phy { diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 727f36abf3d4..7fe994b750da 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1367,7 +1367,7 @@ ranges; status = "disabled"; - dwc3@15400000 { + usbdrd_dwc3: dwc3@15400000 { compatible = "snps,dwc3"; reg = <0x15400000 0x10000>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; @@ -1414,7 +1414,7 @@ ranges; status = "disabled"; - usbdrd_dwc3_0: dwc3@15a00000 { + usbhost_dwc3: dwc3@15a00000 { compatible = "snps,dwc3"; reg = <0x15a00000 0x10000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index e5892bb0ae6e..4a8b1fb51243 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -359,7 +359,6 @@ &mmc_0 { status = "okay"; - num-slots = <1>; cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; @@ -375,7 +374,6 @@ &mmc_2 { status = "okay"; - num-slots = <1>; cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index b1554cbd2c54..df83915d6ea6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -444,6 +444,15 @@ <&clockgen 4 3>; }; + usb0: usb3@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 0x4>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + }; + sata: sata@3200000 { compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, @@ -454,5 +463,13 @@ dma-coherent; status = "disabled"; }; + + usb1: usb2@8600000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + reg = <0x0 0x8600000 0x0 0x1000>; + interrupts = <0 139 0x4>; + dr_mode = "host"; + phy_type = "ulpi"; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 213abb72de93..0f6fcda36b9e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -49,7 +49,7 @@ #include "fsl-ls1088a.dtsi" / { - model = "L1088A RDB Board"; + model = "LS1088A RDB Board"; compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index c144d06a6e33..33797b373674 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -52,6 +52,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + crypto = &crypto; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -62,6 +66,7 @@ compatible = "arm,cortex-a53"; reg = <0x0>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -70,6 +75,7 @@ compatible = "arm,cortex-a53"; reg = <0x1>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PH20>; }; cpu2: cpu@2 { @@ -77,6 +83,7 @@ compatible = "arm,cortex-a53"; reg = <0x2>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PH20>; }; cpu3: cpu@3 { @@ -84,6 +91,7 @@ compatible = "arm,cortex-a53"; reg = <0x3>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PH20>; }; cpu4: cpu@100 { @@ -91,6 +99,7 @@ compatible = "arm,cortex-a53"; reg = <0x100>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -99,6 +108,7 @@ compatible = "arm,cortex-a53"; reg = <0x101>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PH20>; }; cpu6: cpu@102 { @@ -106,6 +116,7 @@ compatible = "arm,cortex-a53"; reg = <0x102>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PH20>; }; cpu7: cpu@103 { @@ -113,6 +124,16 @@ compatible = "arm,cortex-a53"; reg = <0x103>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PH20>; + }; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; }; }; @@ -136,6 +157,11 @@ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -369,6 +395,45 @@ dma-coherent; status = "disabled"; }; + + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index ed209cd57283..3c99608b9b45 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -55,11 +55,6 @@ model = "Freescale Layerscape 2080a QDS Board"; compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index 67ec3f9c81a1..a4e7de9f70d8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -55,11 +55,6 @@ model = "Freescale Layerscape 2080a RDB Board"; compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - }; - chosen { stdout-path = "serial1:115200n8"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index 3ee718f0aaf8..fbbb73e571c0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -52,11 +52,6 @@ model = "Freescale Layerscape 2080a software Simulator model"; compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - }; - ethernet@2210000 { compatible = "smsc,lan91c111"; reg = <0x0 0x2210000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index d789c6814e6a..8d739301e7b8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -53,6 +53,7 @@ compatible = "arm,cortex-a57"; reg = <0x0>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; }; @@ -62,6 +63,7 @@ compatible = "arm,cortex-a57"; reg = <0x1>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; }; @@ -70,6 +72,7 @@ compatible = "arm,cortex-a57"; reg = <0x100>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; }; @@ -79,6 +82,7 @@ compatible = "arm,cortex-a57"; reg = <0x101>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; }; @@ -87,6 +91,7 @@ compatible = "arm,cortex-a57"; reg = <0x200>; clocks = <&clockgen 1 2>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>; }; @@ -96,6 +101,7 @@ compatible = "arm,cortex-a57"; reg = <0x201>; clocks = <&clockgen 1 2>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; }; @@ -105,6 +111,7 @@ reg = <0x300>; clocks = <&clockgen 1 3>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; }; @@ -113,6 +120,7 @@ compatible = "arm,cortex-a57"; reg = <0x301>; clocks = <&clockgen 1 3>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; }; @@ -131,6 +139,15 @@ cluster3_l2: l2-cache3 { compatible = "cache"; }; + + CPU_PW20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; &pcie1 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts index 4a1df5ce3229..eaee5b1c3a44 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -54,11 +54,6 @@ model = "Freescale Layerscape 2088A QDS Board"; compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index a76d4b4debd1..c411442cac62 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -54,11 +54,6 @@ model = "Freescale Layerscape 2088A RDB Board"; compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - }; - chosen { stdout-path = "serial1:115200n8"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 5c695c658056..6aa319dae396 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -53,6 +53,7 @@ compatible = "arm,cortex-a72"; reg = <0x0>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; }; @@ -62,6 +63,7 @@ compatible = "arm,cortex-a72"; reg = <0x1>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; }; @@ -70,6 +72,7 @@ compatible = "arm,cortex-a72"; reg = <0x100>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; }; @@ -79,6 +82,7 @@ compatible = "arm,cortex-a72"; reg = <0x101>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; }; @@ -88,6 +92,7 @@ reg = <0x200>; clocks = <&clockgen 1 2>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; }; @@ -96,6 +101,7 @@ compatible = "arm,cortex-a72"; reg = <0x201>; clocks = <&clockgen 1 2>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; }; @@ -104,6 +110,7 @@ compatible = "arm,cortex-a72"; reg = <0x300>; clocks = <&clockgen 1 3>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; }; @@ -113,6 +120,7 @@ compatible = "arm,cortex-a72"; reg = <0x301>; clocks = <&clockgen 1 3>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; }; @@ -131,6 +139,15 @@ cluster3_l2: l2-cache3 { compatible = "cache"; }; + + CPU_PW20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; &pcie1 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 94cdd3045037..4fb9a0966a84 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -46,6 +46,7 @@ */ #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "fsl,ls2080a"; @@ -53,6 +54,12 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + crypto = &crypto; + serial0 = &serial0; + serial1 = &serial1; + }; + cpu: cpus { #address-cells = <1>; #size-cells = <0>; @@ -118,6 +125,11 @@ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -301,6 +313,45 @@ clock-names = "apb_pclk", "wdog_clk"; }; + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 6609b0fe7a8b..fd4705c451e2 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -39,6 +39,34 @@ reg = <0x0 0x0 0x0 0x0>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@32000000 { + compatible = "ramoops"; + reg = <0x0 0x32000000 0x0 0x00100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + }; + + reboot-mode-syscon@32100000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x32100000 0x0 0x00001000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x0>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; + keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -159,6 +187,13 @@ startup-delay-us = <70000>; enable-active-high; }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; }; &i2c0 { @@ -195,7 +230,7 @@ bluetooth { compatible = "ti,wl1837-st"; enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>; - max-speed = <921600>; + max-speed = <3000000>; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index c6a1961e8d55..b7a90d632959 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -58,6 +58,8 @@ device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; }; cpu1: cpu@1 { @@ -65,6 +67,8 @@ device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; }; cpu2: cpu@2 { @@ -72,6 +76,8 @@ device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; }; cpu3: cpu@3 { @@ -79,6 +85,8 @@ device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; }; cpu4: cpu@100 { @@ -86,6 +94,12 @@ device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; }; cpu5: cpu@101 { @@ -93,6 +107,12 @@ device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; }; cpu6: cpu@102 { @@ -100,6 +120,12 @@ device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; }; cpu7: cpu@103 { @@ -107,6 +133,59 @@ device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; + }; + + idle-states { + entry-method = "psci"; + + CPU_NAP: cpu-nap { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0000001>; + entry-latency-us = <7>; + exit-latency-us = <2>; + min-residency-us = <15>; + }; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <40>; + exit-latency-us = <70>; + min-residency-us = <3000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <5000>; + min-residency-us = <20000>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <1000>; + exit-latency-us = <5000>; + min-residency-us = <20000>; + }; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A73_L2: l2-cache1 { + compatible = "cache"; }; }; @@ -123,6 +202,26 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>, + <&cpu4>, + <&cpu5>, + <&cpu6>, + <&cpu7>; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -337,6 +436,19 @@ status = "disabled"; }; + dma0: dma@fdf30000 { + compatible = "hisilicon,k3-dma-1.0"; + reg = <0x0 0xfdf30000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + dma-min-chan = <1>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>; + dma-no-cci; + dma-type = "hi3660_dma"; + }; + rtc0: rtc@fff04000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x0 0Xfff04000 0x0 0x1000>; @@ -810,6 +922,7 @@ clock-names = "ciu", "biu"; clock-frequency = <3200000>; resets = <&crg_rst 0x94 18>; + reset-names = "reset"; cd-gpios = <&gpio25 3 0>; hisilicon,peripheral-syscon = <&sctrl>; pinctrl-names = "default"; @@ -839,6 +952,7 @@ <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; clock-names = "ciu", "biu"; resets = <&crg_rst 0x94 20>; + reset-names = "reset"; card-detect-delay = <200>; supports-highspeed; keep-power-in-suspend; @@ -848,5 +962,21 @@ &sdio_cfg_func>; status = "disabled"; }; + + watchdog0: watchdog@e8a06000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a06000 0x0 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; + + watchdog1: watchdog@e8a07000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a07000 0x0 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index eacbe0db5bc2..02a3aa4b2165 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -262,6 +262,12 @@ #clock-cells = <1>; }; + acpu_sctrl: acpu_sctrl@f6504000 { + compatible = "hisilicon,hi6220-acpu-sctrl", "syscon"; + reg = <0x0 0xf6504000 0x0 0x1000>; + #clock-cells = <1>; + }; + medianoc_ade: medianoc_ade@f4520000 { compatible = "syscon"; reg = <0x0 0xf4520000 0x0 0x4000>; @@ -755,7 +761,8 @@ dr_mode = "otg"; g-rx-fifo-size = <512>; g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 128 128 128 128>; + g-tx-fifo-size = <128 128 128 128 128 128 128 128 + 16 16 16 16 16 16 16>; interrupts = <0 77 0x4>; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts index f5d7f0889b41..fe7c16c36025 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -84,3 +84,7 @@ &sas1 { status = "ok"; }; + +&p0_pcie2_a { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 283d7b532e16..2c01a21c3665 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1534,5 +1534,27 @@ <637 1>,<638 1>,<639 1>; status = "disabled"; }; + + p0_pcie2_a: pcie@a00a0000 { + compatible = "hisilicon,hip07-pcie-ecam"; + reg = <0 0xaf800000 0 0x800000>, + <0 0xa00a0000 0 0x10000>; + bus-range = <0xf8 0xff>; + msi-map = <0xf800 &p0_its_dsa_a 0xf800 0x800>; + msi-map-mask = <0xffff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000 + 0x01000000 0 0 0 0xaf7f0000 0 0x10000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4 + 0x0 0 0 2 &mbigen_pcie2_a 671 4 + 0x0 0 0 3 &mbigen_pcie2_a 671 4 + 0x0 0 0 4 &mbigen_pcie2_a 671 4>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 3e6ce6c15a74..6cff81eeaae2 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index e3a136ed77b0..2ce52ba74f73 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -45,6 +45,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "armada-372x.dtsi" / { @@ -59,6 +60,20 @@ device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; }; /* J9 */ @@ -71,6 +86,16 @@ status = "okay"; }; +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + /* Exported on the micro USB connector J5 through an FTDI */ &uart0 { status = "okay"; @@ -81,6 +106,11 @@ status = "okay"; }; +/* J8 */ +&usb2 { + status = "okay"; +}; + &mdio { switch0: switch0@1 { compatible = "marvell,mv88e6085"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 51763d674050..8c0cf7efac65 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -81,6 +81,11 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -322,7 +327,11 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x1d00000 0x10000>, /* GICD */ - <0x1d40000 0x40000>; /* GICR */ + <0x1d40000 0x40000>, /* GICR */ + <0x1d80000 0x2000>, /* GICC */ + <0x1d90000 0x2000>, /* GICH */ + <0x1da0000 0x20000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 92c761c380d3..9c3bdf87e543 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -44,6 +44,7 @@ * Device Tree file for Marvell Armada 7040 Development board platform */ +#include <dt-bindings/gpio/gpio.h> #include "armada-7040.dtsi" / { @@ -59,6 +60,34 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cpm_usb3_0_phy: cpm-usb3-0-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cpm_reg_usb3_0_vbus>; + }; + + cpm_usb3_1_phy: cpm-usb3-1-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cpm_reg_usb3_1_vbus>; + }; }; &i2c0 { @@ -105,6 +134,14 @@ &cpm_i2c0 { status = "okay"; clock-frequency = <100000>; + + expander0: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; }; &cpm_spi1 { @@ -140,10 +177,12 @@ }; &cpm_usb3_0 { + usb-phy = <&cpm_usb3_0_phy>; status = "okay"; }; &cpm_usb3_1 { + usb-phy = <&cpm_usb3_1_phy>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 1e8f7242ed6f..0d7b2ae46610 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -44,6 +44,7 @@ * Device Tree file for Marvell Armada 8040 Development board platform */ +#include <dt-bindings/gpio/gpio.h> #include "armada-8040.dtsi" / { @@ -59,6 +60,48 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + compatible = "regulator-fixed"; + regulator-name = "cpm-usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + compatible = "regulator-fixed"; + regulator-name = "cpm-usb3h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cpm_usb3_0_phy: cpm-usb3-0-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cpm_reg_usb3_0_vbus>; + }; + + cpm_usb3_1_phy: cpm-usb3-1-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cpm_reg_usb3_1_vbus>; + }; + + cps_reg_usb3_0_vbus: cps-usb3-0-vbus { + compatible = "regulator-fixed"; + regulator-name = "cps-usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander1 0 GPIO_ACTIVE_HIGH>; + }; + + cps_usb3_0_phy: cps-usb3-0-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cps_reg_usb3_0_vbus>; + }; }; &i2c0 { @@ -107,6 +150,25 @@ &cpm_i2c0 { status = "okay"; clock-frequency = <100000>; + + /* U31 */ + expander0: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + /* U25 */ + expander1: pca9555@25 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x25>; + }; + }; /* CON4 on CP0 expansion */ @@ -116,11 +178,13 @@ /* CON9 on CP0 expansion */ &cpm_usb3_0 { + usb-phy = <&cpm_usb3_0_phy>; status = "okay"; }; /* CON10 on CP0 expansion */ &cpm_usb3_1 { + usb-phy = <&cpm_usb3_1_phy>; status = "okay"; }; @@ -159,6 +223,7 @@ /* CON9 on CP1 expansion */ &cps_usb3_0 { + usb-phy = <&cps_usb3_0_phy>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 4968e731de61..acf5c7d16d79 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -46,11 +46,17 @@ #include "armada-8040.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Marvell 8040 MACHIATOBin"; compatible = "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@00000000 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; @@ -77,11 +83,13 @@ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_xhci_vbus_pins>; regulator-name = "v_5v0_usb3_hst_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - /* actually GPIO controlled, but 8k has no GPIO support yet */ - regulator-always-on; status = "okay"; }; @@ -112,10 +120,44 @@ &cpm_i2c0 { clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_i2c0_pins>; status = "okay"; }; +&cpm_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_i2c1_pins>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + sfpp1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + sfp_1g_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + }; +}; + &cpm_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cpm_ge_mdio_pins>; status = "okay"; ge_phy: ethernet-phy@0 { @@ -123,6 +165,67 @@ }; }; +&cpm_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cpm_pcie_pins>; + num-lanes = <4>; + num-viewport = <8>; + reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&cpm_pinctrl { + cpm_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cpm_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cpm_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cpm_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cpm_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cpm_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; +}; + +&cpm_xmdio { + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + + phy8: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cpm_ethernet { + status = "okay"; +}; + +&cpm_eth0 { + status = "okay"; + phy = <&phy0>; + phy-mode = "10gbase-kr"; +}; + &cpm_sata0 { /* CPM Lane 0 - U29 */ status = "okay"; @@ -132,6 +235,8 @@ /* U6 */ broken-cd; bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_sdhci_pins>; status = "okay"; vqmmc-supply = <&v_3_3>; }; @@ -150,6 +255,12 @@ status = "okay"; }; +&cps_eth0 { + status = "okay"; + phy = <&phy8>; + phy-mode = "10gbase-kr"; +}; + &cps_eth1 { /* CPS Lane 0 - J5 (Gigabit RJ45) */ status = "okay"; @@ -157,6 +268,13 @@ phy-mode = "sgmii"; }; +&cps_pinctrl { + cps_spi1_pins: spi1-pins { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; +}; + &cps_sata0 { /* CPS Lane 1 - U32 */ /* CPS Lane 3 - U31 */ @@ -164,6 +282,8 @@ }; &cps_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cps_spi1_pins>; status = "okay"; spi-flash@0 { diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts new file mode 100644 index 000000000000..707af833832b --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada-8080 Development board platform + */ + +#include "armada-8080.dtsi" + +/ { + model = "Marvell 8080 board"; + compatible = "marvell,armada-8080-db", "marvell,armada-8080", + "marvell,armada-ap810-octa", "marvell,armada-ap810"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart0_ap0 { + clock-frequency = <384000>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi new file mode 100644 index 000000000000..d5535b716735 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA. + */ + +#include "armada-ap810-ap0-octa-core.dtsi" + +/ { + model = "Marvell 8080 board"; + compatible = "marvell,armada-8080", "marvell,armada-ap810-octa", + "marvell,armada-ap810"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi new file mode 100644 index 000000000000..bf1b22b70384 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada AP810 OCTA cores. + */ + +#include "armada-ap810-ap0.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,armada-ap810-octa"; + + cpu@000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x000>; + enable-method = "psci"; + }; + cpu@001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x001>; + enable-method = "psci"; + }; + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + }; + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + }; + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x200>; + enable-method = "psci"; + }; + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x201>; + enable-method = "psci"; + }; + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x300>; + enable-method = "psci"; + }; + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x301>; + enable-method = "psci"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi new file mode 100644 index 000000000000..7e6f039f0f80 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada AP810. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/dts-v1/; + +/ { + model = "Marvell Armada AP810"; + compatible = "marvell,armada-ap810"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0_ap0; + serial1 = &uart1_ap0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + ap810-ap0 { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@e8000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xe8000000 0x4000000>; + interrupt-parent = <&gic>; + + gic: interrupt-controller@3000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges; + + reg = <0x3000000 0x10000>, /* GICD */ + <0x3060000 0x100000>, /* GICR */ + <0x00c0000 0x2000>, /* GICC */ + <0x00d0000 0x1000>, /* GICH */ + <0x00e0000 0x2000>; /* GICV */ + + gic_its_ap0: interrupt-controller@3040000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x3040000 0x20000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_its_ap0 0xa0>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_its_ap0 0xa1>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_its_ap0 0xa2>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_its_ap0 0xa3>; + dma-coherent; + }; + + uart0_ap0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + status = "disabled"; + }; + + uart1_ap0: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 4c68605675a8..8263a8a504a8 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -65,25 +65,44 @@ reg = <0x0 0x100000>, <0x129000 0xb000>; clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>; clock-names = "pp_clk", "gop_clk", "mg_clk"; + marvell,system-controller = <&cpm_syscon0>; status = "disabled"; dma-coherent; cpm_eth0: eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <0>; gop-port-id = <0>; status = "disabled"; }; cpm_eth1: eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <1>; gop-port-id = <2>; status = "disabled"; }; cpm_eth2: eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <2>; gop-port-id = <3>; status = "disabled"; @@ -115,6 +134,13 @@ msi-parent = <&gicp>; }; + cpm_rtc: rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; + }; + cpm_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x1000>; @@ -131,8 +157,12 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&cpm_pinctrl 0 0 32>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; - }; cpm_gpio2: gpio@140 { @@ -142,26 +172,15 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&cpm_pinctrl 0 32 31>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; - cpm_rtc: rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - - cpm_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 15>; - status = "disabled"; - }; - cpm_usb3_0: usb3@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; @@ -182,6 +201,15 @@ status = "disabled"; }; + cpm_sata0: sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 15>; + status = "disabled"; + }; + cpm_xor0: xor@6a0000 { compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; reg = <0x6a0000 0x1000>, @@ -240,6 +268,21 @@ status = "disabled"; }; + cpm_nand: nand@720000 { + /* + * Due to the limiation of the pin available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada370-nand"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 2>; + status = "disabled"; + }; + cpm_trng: trng@760000 { compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; reg = <0x760000 0x7d>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 923f354b02f0..b71ee6c83668 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -60,37 +60,49 @@ compatible = "simple-bus"; ranges = <0x0 0x0 0xf4000000 0x2000000>; - cps_rtc: rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - cps_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>; clock-names = "pp_clk", "gop_clk", "mg_clk"; + marvell,system-controller = <&cps_syscon0>; status = "disabled"; dma-coherent; cps_eth0: eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <0>; gop-port-id = <0>; status = "disabled"; }; cps_eth1: eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <1>; gop-port-id = <2>; status = "disabled"; }; cps_eth2: eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <2>; gop-port-id = <3>; status = "disabled"; @@ -122,6 +134,13 @@ msi-parent = <&gicp>; }; + cps_rtc: rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; + }; + cps_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x1000>; @@ -138,8 +157,12 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&cps_pinctrl 0 0 32>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; - }; cps_gpio2: gpio@140 { @@ -149,20 +172,16 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&cps_pinctrl 0 32 31>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; - cps_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 15>; - status = "disabled"; - }; - cps_usb3_0: usb3@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; @@ -183,6 +202,15 @@ status = "disabled"; }; + cps_sata0: sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 15>; + status = "disabled"; + }; + cps_xor0: xor@6a0000 { compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; reg = <0x6a0000 0x1000>, @@ -241,6 +269,21 @@ status = "disabled"; }; + cps_nand: nand@720000 { + /* + * Due to the limiation of the pin available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada370-nand"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 2>; + status = "disabled"; + }; + cps_trng: trng@760000 { compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; reg = <0x760000 0x7d>; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 015eb072ddef..151723b5c733 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -1,6 +1,8 @@ +dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts new file mode 100644 index 000000000000..8c804df3da4e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: YT Shen <yt.shen@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; +#include "mt2712e.dtsi" + +/ { + model = "MediaTek MT2712 evaluation board"; + compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi new file mode 100644 index 000000000000..57d0396b7faa --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -0,0 +1,171 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: YT Shen <yt.shen@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "mediatek,mt2712"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu2>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x001>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + baud_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + sys_clk: dummyclk { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>; + }; + + uart5: serial@1000f000 { + compatible = "mediatek,mt2712-uart", + "mediatek,mt6577-uart"; + reg = <0 0x1000f000 0 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&baud_clk>, <&sys_clk>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + sysirq: interrupt-controller@10220a80 { + compatible = "mediatek,mt2712-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10220a80 0 0x40>; + }; + + gic: interrupt-controller@10510000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10510000 0 0x10000>, + <0 0x10520000 0 0x20000>, + <0 0x10540000 0 0x20000>, + <0 0x10560000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt2712-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&baud_clk>, <&sys_clk>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt2712-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&baud_clk>, <&sys_clk>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt2712-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&baud_clk>, <&sys_clk>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt2712-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; + clocks = <&baud_clk>, <&sys_clk>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart4: serial@11019000 { + compatible = "mediatek,mt2712-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11019000 0 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>; + clocks = <&baud_clk>, <&sys_clk>; + clock-names = "baud", "bus"; + status = "disabled"; + }; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi index 31088a9f71de..4beaa71107d7 100644 --- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi @@ -108,13 +108,6 @@ clock-output-names = "clk26m"; }; - clk32k: oscillator@1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32000>; - clock-output-names = "clk32k"; - }; - timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -147,6 +140,11 @@ infracfg = <&infrasys>; }; + watchdog: watchdog@10007000 { + compatible = "mediatek,mt6797-wdt", "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + apmixedsys: apmixed@1000c000 { compatible = "mediatek,mt6797-apmixedsys"; reg = <0 0x1000c000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts new file mode 100644 index 000000000000..c08309df2cc7 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: Ming Huang <ming.huang@mediatek.com> + * Sean Wang <sean.wang@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; +#include "mt7622.dtsi" + +/ { + model = "MediaTek MT7622 RFB1 board"; + compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; + + chosen { + bootargs = "console=ttyS0,115200n1"; + }; + + memory { + reg = <0 0x40000000 0 0x3F000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi new file mode 100644 index 000000000000..b111fec2ed9d --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -0,0 +1,110 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: Ming Huang <ming.huang@mediatek.com> + * Sean Wang <sean.wang@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "mediatek,mt7622"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clock-frequency = <1300000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + clock-frequency = <1300000000>; + }; + }; + + uart_clk: dummy25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + bus_clk: dummy280m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <280000000>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@43000000 { + reg = <0 0x43000000 0 0x30000>; + no-map; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + sysirq: interrupt-controller@10200620 { + compatible = "mediatek,mt7622-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10300000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10310000 0 0x1000>, + <0 0x10320000 0 0x1000>, + <0 0x10340000 0 0x2000>, + <0 0x10360000 0 0x2000>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt7622-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>, <&bus_clk>; + clock-names = "baud", "bus"; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index cc0f02d9dd02..ff81d7e5805e 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index d94640812194..790b7775b901 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -17,6 +17,7 @@ function = PMIC_GPIO_FUNC_NORMAL; power-source = <PM8916_GPIO_VPH>; input-disable; + output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index bd310ac1967a..1d63e6b879de 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -88,6 +88,8 @@ interrupts = <31 2>; adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; pd-gpios = <&msmgpio 32 0>; @@ -213,11 +215,14 @@ }; usb@78d9000 { - extcon = <&usb_id>, <&usb_id>; + extcon = <&usb_id>; status = "okay"; adp-disable; hnp-disable; srp-disable; + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_sw_sel_pm>; ulpi { phy { v1p8-supply = <&pm8916_l7>; @@ -337,19 +342,11 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; - usb-switch { - compatible = "toshiba,tc7usb40mu"; - switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; - extcon = <&usb_id>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_sw_sel_pm>; - }; - hdmi-out { compatible = "hdmi-connector"; type = "a"; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index b1142c45fdc9..8e379782597a 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -24,4 +24,28 @@ power-source = <PM8994_GPIO_S4>; // 1.8V }; }; + + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pmi8994_gpios { + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index d2196fc6d739..789f3e87321e 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -13,6 +13,7 @@ #include "msm8996.dtsi" #include "pm8994.dtsi" +#include "pmi8994.dtsi" #include "apq8096-db820c-pins.dtsi" #include "apq8096-db820c-pmic-pins.dtsi" #include <dt-bindings/input/input.h> @@ -88,6 +89,55 @@ cd-gpios = <&msmgpio 38 0x1>; status = "okay"; }; + + phy@34000 { + status = "okay"; + }; + + phy@7410000 { + status = "okay"; + }; + + phy@7411000 { + status = "okay"; + }; + + phy@7412000 { + status = "okay"; + }; + + usb@6a00000 { + status = "okay"; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + usb@7600000 { + status = "okay"; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; }; @@ -106,4 +156,152 @@ gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; }; }; + + rpm-glink { + rpm_requests { + pm8994-regulators { + vdd_l1-supply = <&pm8994_s3>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l20_l21-supply = <&pm8994_s5>; + vdd_l25-supply = <&pm8994_s3>; + + s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + s7 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + l3 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + l6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + l11 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + l17 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + l22 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + l28 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + l29 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts new file mode 100644 index 000000000000..6a838b5d321e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -0,0 +1,52 @@ +/dts-v1/; +/* Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include "ipq8074.dtsi" + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart5; + }; + + chosen { + stdout-path = "serial0"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0x20000000>; + }; + + soc { + pinctrl@1000000 { + serial_4_pins: serial4_pinmux { + mux { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + bias-disable; + }; + }; + }; + + serial@78b3000 { + pinctrl-0 = <&serial_4_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi new file mode 100644 index 000000000000..2bc5dec5614d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -0,0 +1,194 @@ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-ipq8074.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ8074"; + compatible = "qcom,ipq8074"; + + soc: soc { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0xb000000 0x1000>, <0xb002000 0x1000>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + clock-frequency = <19200000>; + + frame@b120000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb128000 0x1000>; + status = "disabled"; + }; + }; + + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x1800000 0x80000>; + #clock-cells = <0x1>; + #reset-cells = <0x1>; + }; + + blsp1_uart5: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b3000 0x200>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + cpus { + #address-cells = <0x1>; + #size-cells = <0x0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x2>; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x3>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; + }; + + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + #clock-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 039991f80831..dc3817593e14 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -88,6 +88,11 @@ no-map; }; + venus_mem: venus@89900000 { + reg = <0x0 0x89900000 0x0 0x600000>; + no-map; + }; + mba_mem: mba@8ea00000 { no-map; reg = <0 0x8ea00000 0 0x100000>; @@ -204,6 +209,17 @@ }; + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -694,6 +710,84 @@ #thermal-sensor-cells = <1>; }; + apps_iommu: iommu@1ef0000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1e20000 0x40000>; + reg = <0x1ef0000 0x3000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <17>; + + // mdp_0: + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; + + // venus_ns: + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + // gfx3d_user: + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + // gfx3d_priv: + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 242 0>; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-306.0", "qcom,adreno"; + reg = <0x01c00000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d"; + clocks = + <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + }; + mdss: mdss@1a00000 { compatible = "qcom,mdss"; reg = <0x1a00000 0x1000>, @@ -735,6 +829,8 @@ "core_clk", "vsync_clk"; + iommus = <&apps_iommu 4>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -990,7 +1086,7 @@ }; replicator@824000 { - compatible = "qcom,coresight-replicator1x", "arm,primecell"; + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0x824000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; @@ -1207,6 +1303,28 @@ }; }; }; + + venus: video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&gcc VENUS_GDSC>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + status = "okay"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; }; smd { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8f085716e258..887b61c872dd 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -276,12 +276,83 @@ hwlocks = <&tcsr_mutex 3>; }; + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + mboxes = <&apcs_glb 0>; + + rpm_requests { + compatible = "qcom,rpm-msm8996"; + qcom,glink-channels = "rpm_requests"; + + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + pm8994_s8: s8 {}; + pm8994_s9: s9 {}; + pm8994_s10: s10 {}; + pm8994_s11: s11 {}; + pm8994_s12: s12 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l5: l5 {}; + pm8994_l6: l6 {}; + pm8994_l7: l7 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + }; + + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + rpm_msg_ram: memory@68000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x68000 0x6000>; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x740000 0x20000>; @@ -303,6 +374,13 @@ reg = <0x9820000 0x1000>; }; + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x9820000 0x1000>; + + #mbox-cells = <1>; + }; + gcc: clock-controller@300000 { compatible = "qcom,gcc-msm8996"; #clock-cells = <1>; @@ -538,6 +616,209 @@ <960000000>, <825000000>; }; + + qfprom@74000 { + compatible = "qcom,qfprom"; + reg = <0x74000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx_trim@24e { + reg = <0x24e 0x2>; + bits = <5 4>; + }; + + qusb2s_hstx_trim: hstx_trim@24f { + reg = <0x24f 0x1>; + bits = <1 4>; + }; + }; + + phy@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x34000 0x488>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + status = "disabled"; + + pciephy_0: lane@35000 { + reg = <0x035000 0x130>, + <0x035200 0x200>, + <0x035400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_0_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "lane0"; + }; + + pciephy_1: lane@36000 { + reg = <0x036000 0x130>, + <0x036200 0x200>, + <0x036400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_1_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe1"; + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "lane1"; + }; + + pciephy_2: lane@37000 { + reg = <0x037000 0x130>, + <0x037200 0x200>, + <0x037400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_2_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe2"; + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "lane2"; + }; + }; + + phy@7410000 { + compatible = "qcom,msm8996-qmp-usb3-phy"; + reg = <0x7410000 0x1c4>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + status = "disabled"; + + ssusb_phy_0: lane@7410200 { + reg = <0x7410200 0x200>, + <0x7410400 0x130>, + <0x7410600 0x1a8>; + #phy-cells = <0>; + + clock-output-names = "usb3_phy_pipe_clk_src"; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + }; + }; + + hsusb_phy1: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + status = "disabled"; + }; + + hsusb_phy2: phy@7412000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7412000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX2_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2s_hstx_trim>; + status = "disabled"; + }; + + usb2: usb@7600000 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + dwc3@7600000 { + compatible = "snps,dwc3"; + reg = <0x7600000 0xcc00>; + interrupts = <0 138 0>; + phys = <&hsusb_phy2>; + phy-names = "usb2-phy"; + }; + }; + + usb3: usb@6a00000 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + dwc3@6a00000 { + compatible = "snps,dwc3"; + reg = <0x6a00000 0xcc00>; + interrupts = <0 131 0>; + phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; }; adsp-pil { @@ -558,6 +839,15 @@ qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + qcom,ipc = <&apcs 16 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + }; }; adsp-smp2p { @@ -584,6 +874,30 @@ }; }; + modem-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 16 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-slpi { compatible = "qcom,smp2p"; qcom,smem = <481>, <430>; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index d3879a4e8076..57673f92805d 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -8,6 +8,23 @@ reg = <0x2 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pmi8994_gpios: gpios@c000 { + compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <2 0xc0 0 IRQ_TYPE_NONE>, + <2 0xc1 0 IRQ_TYPE_NONE>, + <2 0xc2 0 IRQ_TYPE_NONE>, + <2 0xc3 0 IRQ_TYPE_NONE>, + <2 0xc4 0 IRQ_TYPE_NONE>, + <2 0xc5 0 IRQ_TYPE_NONE>, + <2 0xc6 0 IRQ_TYPE_NONE>, + <2 0xc7 0 IRQ_TYPE_NONE>, + <2 0xc8 0 IRQ_TYPE_NONE>, + <2 0xc9 0 IRQ_TYPE_NONE>; + }; }; pmic@3 { diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index acc4bb30d485..381928bc1358 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb always := $(dtb-y) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts index 95fe207cb6a3..dd4f9b6a4254 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts @@ -9,8 +9,6 @@ * kind, whether express or implied. */ -#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 - /dts-v1/; #include "r8a7795-es1.dtsi" #include "ulcb.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index b84c156ed696..3f7d5f51e428 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 - /dts-v1/; #include "r8a7795-es1.dtsi" #include "salvator-x.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index a0ba7bd21ea3..aaa5e67a963e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -21,6 +21,14 @@ status = "disabled"; }; + /delete-node/ usb-phy@ee0e0200; + /delete-node/ usb@ee0e0100; + /delete-node/ usb@ee0e0000; + /delete-node/ usb@e659c000; + + /delete-node/ dma-controller@e6460000; + /delete-node/ dma-controller@e6470000; + fcpf2: fcp@fe952000 { compatible = "renesas,fcpf"; reg = <0 0xfe952000 0 0x200>; @@ -79,6 +87,5 @@ }; &du { - compatible = "renesas,du-r8a7795"; vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 0426f41765f0..0afe777973de 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -9,8 +9,6 @@ * kind, whether express or implied. */ -#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 - /dts-v1/; #include "r8a7795.dtsi" #include "ulcb.dtsi" @@ -40,3 +38,17 @@ reg = <0x7 0x00000000 0x0 0x40000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&cpg CPG_MOD 727>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 4>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 684fb3b9d154..17953070f38d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 - /dts-v1/; #include "r8a7795.dtsi" #include "salvator-x.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index de354957144b..7675de5d4f2c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 - /dts-v1/; #include "r8a7795.dtsi" #include "salvator-xs.dtsi" @@ -46,10 +44,12 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, <&cpg CPG_MOD 727>, + <&versaclock6 1>, <&x21_clk>, - <&x22_clk>; + <&x22_clk>, + <&versaclock6 2>; clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", - "dclkin.1", "dclkin.2"; + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; &ehci2 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index e31c1b660b3f..2938195b9571 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -12,6 +12,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7795-sysc.h> +#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 + / { compatible = "renesas,r8a7795"; #address-cells = <2>; @@ -691,6 +693,126 @@ }; }; + drif00: rif@e6f40000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x64>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 515>; + renesas,bonding = <&drif01>; + status = "disabled"; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x64>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 514>; + renesas,bonding = <&drif00>; + status = "disabled"; + }; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x64>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + status = "disabled"; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x64>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + status = "disabled"; + }; + + drif20: rif@e6f80000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f80000 0 0x64>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 511>; + clock-names = "fck"; + dmas = <&dmac1 0x28>, <&dmac2 0x28>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 511>; + renesas,bonding = <&drif21>; + status = "disabled"; + }; + + drif21: rif@e6f90000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f90000 0 0x64>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 510>; + clock-names = "fck"; + dmas = <&dmac1 0x2a>, <&dmac2 0x2a>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 510>; + renesas,bonding = <&drif20>; + status = "disabled"; + }; + + drif30: rif@e6fa0000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fa0000 0 0x64>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 509>; + clock-names = "fck"; + dmas = <&dmac1 0x2c>, <&dmac2 0x2c>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 509>; + renesas,bonding = <&drif31>; + status = "disabled"; + }; + + drif31: rif@e6fb0000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fb0000 0 0x64>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 508>; + clock-names = "fck"; + dmas = <&dmac1 0x2e>, <&dmac2 0x2e>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 508>; + renesas,bonding = <&drif30>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif", @@ -776,6 +898,68 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a7795", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a7795", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a7795", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a7795", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a7795", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -1267,7 +1451,8 @@ }; sata: sata@ee300000 { - compatible = "renesas,sata-r8a7795"; + compatible = "renesas,sata-r8a7795", + "renesas,rcar-gen3-sata"; reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; @@ -1314,6 +1499,34 @@ dma-channels = <2>; }; + usb_dmac2: dma-controller@e6460000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe6460000 0 0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 326>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 326>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac3: dma-controller@e6470000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe6470000 0 0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 329>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 329>; + #dma-cells = <1>; + dma-channels = <2>; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7795"; reg = <0 0xee100000 0 0x2000>; @@ -1392,6 +1605,18 @@ status = "disabled"; }; + usb2_phy3: usb-phy@ee0e0200 { + compatible = "renesas,usb2-phy-r8a7795", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0e0200 0 0x700>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 700>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 700>; + #phy-cells = <0>; + status = "disabled"; + }; + ehci0: usb@ee080100 { compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; @@ -1399,6 +1624,7 @@ clocks = <&cpg CPG_MOD 703>; phys = <&usb2_phy0>; phy-names = "usb"; + companion = <&ohci0>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 703>; status = "disabled"; @@ -1411,6 +1637,7 @@ clocks = <&cpg CPG_MOD 702>; phys = <&usb2_phy1>; phy-names = "usb"; + companion = <&ohci1>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; @@ -1423,11 +1650,25 @@ clocks = <&cpg CPG_MOD 701>; phys = <&usb2_phy2>; phy-names = "usb"; + companion = <&ohci2>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 701>; status = "disabled"; }; + ehci3: usb@ee0e0100 { + compatible = "generic-ehci"; + reg = <0 0xee0e0100 0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 700>; + phys = <&usb2_phy3>; + phy-names = "usb"; + companion = <&ohci3>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 700>; + status = "disabled"; + }; + ohci0: usb@ee080000 { compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; @@ -1464,6 +1705,18 @@ status = "disabled"; }; + ohci3: usb@ee0e0000 { + compatible = "generic-ohci"; + reg = <0 0xee0e0000 0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 700>; + phys = <&usb2_phy3>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 700>; + status = "disabled"; + }; + hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a7795", "renesas,rcar-gen3-usbhs"; @@ -1481,6 +1734,23 @@ status = "disabled"; }; + hsusb3: usb@e659c000 { + compatible = "renesas,usbhs-r8a7795", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe659c000 0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>; + dmas = <&usb_dmac2 0>, <&usb_dmac2 1>, + <&usb_dmac3 0>, <&usb_dmac3 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy3>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + pciec0: pcie@fe000000 { compatible = "renesas,pcie-r8a7795", "renesas,pcie-rcar-gen3"; @@ -1535,6 +1805,46 @@ status = "disabled"; }; + imr-lx4@fe860000 { + compatible = "renesas,r8a7795-imr-lx4", + "renesas,imr-lx4"; + reg = <0 0xfe860000 0 0x2000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 823>; + power-domains = <&sysc R8A7795_PD_A3VC>; + resets = <&cpg 823>; + }; + + imr-lx4@fe870000 { + compatible = "renesas,r8a7795-imr-lx4", + "renesas,imr-lx4"; + reg = <0 0xfe870000 0 0x2000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 822>; + power-domains = <&sysc R8A7795_PD_A3VC>; + resets = <&cpg 822>; + }; + + imr-lx4@fe880000 { + compatible = "renesas,r8a7795-imr-lx4", + "renesas,imr-lx4"; + reg = <0 0xfe880000 0 0x2000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 821>; + power-domains = <&sysc R8A7795_PD_A3VC>; + resets = <&cpg 821>; + }; + + imr-lx4@fe890000 { + compatible = "renesas,r8a7795-imr-lx4", + "renesas,imr-lx4"; + reg = <0 0xfe890000 0 0x2000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 820>; + power-domains = <&sysc R8A7795_PD_A3VC>; + resets = <&cpg 820>; + }; + vspbc: vsp@fe920000 { compatible = "renesas,vsp2"; reg = <0 0xfe920000 0 0x8000>; @@ -1755,6 +2065,7 @@ }; du: display@feb00000 { + compatible = "renesas,du-r8a7795"; reg = <0 0xfeb00000 0 0x80000>, <0 0xfeb90000 0 0x14>; reg-names = "du", "lvds.0"; @@ -1768,6 +2079,7 @@ <&cpg CPG_MOD 721>, <&cpg CPG_MOD 727>; clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; + vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index 38b58b7fca4b..daee1f1a3f68 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -9,8 +9,6 @@ * kind, whether express or implied. */ -#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4 - /dts-v1/; #include "r8a7796.dtsi" #include "ulcb.dtsi" @@ -30,3 +28,15 @@ reg = <0x6 0x00000000 0x0 0x40000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 727>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index db4f162d6bdd..b317be03306e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4 - /dts-v1/; #include "r8a7796.dtsi" #include "salvator-x.dtsi" @@ -29,3 +27,32 @@ reg = <0x6 0x00000000 0x0 0x80000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 727>, + <&versaclock5 1>, + <&x21_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 1f6710912045..369092e17e34 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -12,6 +12,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7796-sysc.h> +#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4 + / { compatible = "renesas,r8a7796"; #address-cells = <2>; @@ -639,6 +641,126 @@ }; }; + drif00: rif@e6f40000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x64>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 515>; + renesas,bonding = <&drif01>; + status = "disabled"; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x64>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 514>; + renesas,bonding = <&drif00>; + status = "disabled"; + }; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x64>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + status = "disabled"; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x64>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + status = "disabled"; + }; + + drif20: rif@e6f80000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f80000 0 0x64>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 511>; + clock-names = "fck"; + dmas = <&dmac1 0x28>, <&dmac2 0x28>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 511>; + renesas,bonding = <&drif21>; + status = "disabled"; + }; + + drif21: rif@e6f90000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f90000 0 0x64>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 510>; + clock-names = "fck"; + dmas = <&dmac1 0x2a>, <&dmac2 0x2a>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 510>; + renesas,bonding = <&drif20>; + status = "disabled"; + }; + + drif30: rif@e6fa0000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fa0000 0 0x64>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 509>; + clock-names = "fck"; + dmas = <&dmac1 0x2c>, <&dmac2 0x2c>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 509>; + renesas,bonding = <&drif31>; + status = "disabled"; + }; + + drif31: rif@e6fb0000 { + compatible = "renesas,r8a7796-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fb0000 0 0x64>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 508>; + clock-names = "fck"; + dmas = <&dmac1 0x2e>, <&dmac2 0x2e>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 508>; + renesas,bonding = <&drif30>; + status = "disabled"; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a7796", "renesas,etheravb-rcar-gen3"; @@ -877,7 +999,7 @@ clocks = <&cpg CPG_MOD 211>; dmas = <&dmac1 0x41>, <&dmac1 0x40>, <&dmac2 0x41>, <&dmac2 0x40>; - dma-names = "tx", "rx"; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 211>; #address-cells = <1>; @@ -893,7 +1015,7 @@ clocks = <&cpg CPG_MOD 210>; dmas = <&dmac1 0x43>, <&dmac1 0x42>, <&dmac2 0x43>, <&dmac2 0x42>; - dma-names = "tx", "rx"; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 210>; #address-cells = <1>; @@ -1101,36 +1223,133 @@ dma-channels = <16>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7796-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7796-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + hsusb: usb@e6590000 { - /* placeholder */ + compatible = "renesas,usbhs-r8a7796", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; }; xhci0: usb@ee000000 { - /* placeholder */ + compatible = "renesas,xhci-r8a7796", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; }; ohci0: usb@ee080000 { - /* placeholder */ + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; }; ehci0: usb@ee080100 { - /* placeholder */ + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion= <&ohci0>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; }; usb2_phy0: usb-phy@ee080200 { - /* placeholder */ + compatible = "renesas,usb2-phy-r8a7796", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; }; ohci1: usb@ee0a0000 { - /* placeholder */ + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; }; ehci1: usb@ee0a0100 { - /* placeholder */ + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + companion= <&ohci1>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; }; usb2_phy1: usb-phy@ee0a0200 { - /* placeholder */ + compatible = "renesas,usb2-phy-r8a7796", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <0>; + status = "disabled"; }; sdhi0: sd@ee100000 { @@ -1440,8 +1659,150 @@ /* placeholder */ }; + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 615>; + }; + + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 607>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 611>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x4000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x4000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 602>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x4000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + fcpvd2: fcp@fea37000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea37000 0 0x200>; + clocks = <&cpg CPG_MOD 601>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 601>; + }; + + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a7796-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7796_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + }; + }; + du: display@feb00000 { - /* placeholder */ + compatible = "renesas,du-r8a7796"; + reg = <0 0xfeb00000 0 0x70000>, + <0 0xfeb90000 0 0x14>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 727>; + clock-names = "du.0", "du.1", "du.2", "lvds.0"; + status = "disabled"; + + vsps = <&vspd0 &vspd1 &vspd2>; ports { #address-cells = <1>; @@ -1452,7 +1813,38 @@ du_out_rgb: endpoint { }; }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; }; }; + + imr-lx4@fe860000 { + compatible = "renesas,r8a7796-imr-lx4", + "renesas,imr-lx4"; + reg = <0 0xfe860000 0 0x2000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 823>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 823>; + }; + + imr-lx4@fe870000 { + compatible = "renesas,r8a7796-imr-lx4", + "renesas,imr-lx4"; + reg = <0 0xfe870000 0 0x2000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 822>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 822>; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts new file mode 100644 index 000000000000..d144370051d5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -0,0 +1,46 @@ +/* + * Device Tree Source for the Draak board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2017 Glider bvba + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a77995.dtsi" + +/ { + model = "Renesas Draak board based on r8a77995"; + compatible = "renesas,draak", "renesas,r8a77995"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x18000000>; + }; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&scif2 { + status = "okay"; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi new file mode 100644 index 000000000000..d0f95b78c022 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -0,0 +1,155 @@ +/* + * Device Tree Source for the r8a77995 SoC + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2017 Glider bvba + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "renesas,r8a77995"; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a53_0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77995-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc 32>; + resets = <&cpg 402>; + status = "disabled"; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77995-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77995-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a77995"; + reg = <0 0xe6060000 0 0x508>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77995-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE 16>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc 32>; + resets = <&cpg 310>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index f903957da504..4786c67b5e65 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -268,10 +268,6 @@ remote-endpoint = <&adv7123_in>; }; }; - port@3 { - lvds_connector: endpoint { - }; - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi index 81227e3c2c6f..bf4d200fb546 100644 --- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -18,3 +18,13 @@ &extal_clk { clock-frequency = <16640000>; }; + +&i2c4 { + versaclock6: clock-generator@6a { + compatible = "idt,5p49v6901"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x23_clk>; + clock-names = "xin"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index d1a3f3b7a0ab..1b868df2393f 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -34,6 +34,16 @@ clock-frequency = <11289600>; }; + hdmi0-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con: endpoint { + }; + }; + }; + keyboard { compatible = "gpio-keys"; @@ -120,6 +130,12 @@ #clock-cells = <0>; clock-frequency = <24576000>; }; + + x23_clk: x23-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; }; &audio_clk_a { @@ -153,6 +169,23 @@ clock-frequency = <32768>; }; +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -189,6 +222,24 @@ }; }; +&i2c4 { + status = "okay"; + + clock-frequency = <400000>; + + versaclock5: clock-generator@6a { + compatible = "idt,5p49v5925"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x23_clk>; + clock-names = "xin"; + }; +}; + +&i2c_dvfs { + status = "okay"; +}; + &ohci1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index bcfa53b1e6b7..f1c9b13cea5c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb @@ -7,6 +8,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index b9f36dad17e6..8e6a65431756 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -51,6 +51,25 @@ stdout-path = "serial2:1500000n8"; }; + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_phy"; @@ -69,6 +88,151 @@ status = "okay"; }; +&i2c1 { + status = "okay"; + + rk805: rk805@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + &uart2 { status = "okay"; }; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts new file mode 100644 index 000000000000..d4f80786e7c2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -0,0 +1,333 @@ +/* + * Copyright (c) 2017 PINE64 + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Pine64 Rock64"; + compatible = "pine64,rock64", "rockchip,rk3328"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + + vcc_host_5v: vcc-host-5v-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_5v"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb20_host_drv>; + regulator-name = "vcc_host1_5v"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_io>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk805: rk805@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&io_domains { + status = "okay"; + + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + pmuio-supply = <&vcc_io>; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + usb20_host_drv: usb20-host-drv { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index d48bf5d9f8bd..6d615cb6e64d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/power/rk3328-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "rockchip,rk3328"; @@ -76,8 +77,11 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu1: cpu@1 { @@ -85,8 +89,10 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu2: cpu@2 { @@ -94,8 +100,10 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu3: cpu@3 { @@ -103,8 +111,10 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu0_opp_table>; }; l2: l2-cache0 { @@ -112,6 +122,43 @@ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <40000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <40000>; + }; + opp-1296000000 { + opp-hz = /bits/ 64 <1296000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <40000>; + }; + }; + amba { compatible = "simple-bus"; #address-cells = <2>; @@ -158,12 +205,84 @@ clock-output-names = "xin24m"; }; + i2s0: i2s@ff000000 { + compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff000000 0x0 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac 11>, <&dmac 12>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s1: i2s@ff010000 { + compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff010000 0x0 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac 14>, <&dmac 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s2: i2s@ff020000 { + compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff020000 0x0 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac 0>, <&dmac 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spdif: spdif@ff030000 { + compatible = "rockchip,rk3328-spdif"; + reg = <0x0 0xff030000 0x0 0x1000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>; + clock-names = "mclk", "hclk"; + dmas = <&dmac 10>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdifm2_tx>; + status = "disabled"; + }; + + pdm: pdm@ff040000 { + compatible = "rockchip,pdm"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>; + clock-names = "pdm_clk", "pdm_hclk"; + dmas = <&dmac 16>; + dma-names = "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pdmm0_clk + &pdmm0_sdi0 + &pdmm0_sdi1 + &pdmm0_sdi2 + &pdmm0_sdi3>; + pinctrl-1 = <&pdmm0_clk_sleep + &pdmm0_sdi0_sleep + &pdmm0_sdi1_sleep + &pdmm0_sdi2_sleep + &pdmm0_sdi3_sleep>; + status = "disabled"; + }; + grf: syscon@ff100000 { compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd"; reg = <0x0 0xff100000 0x0 0x1000>; #address-cells = <1>; #size-cells = <1>; + io_domains: io-domains { + compatible = "rockchip,rk3328-io-voltage-domain"; + status = "disabled"; + }; + power: power-controller { compatible = "rockchip,rk3328-power-controller"; #power-domain-cells = <1>; @@ -310,6 +429,108 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; }; + pwm0: pwm@ff1b0000 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0000 0x0 0x10>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff1b0010 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0010 0x0 0x10>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@ff1b0020 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0020 0x0 0x10>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@ff1b0030 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0030 0x0 0x10>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwmir_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + thermal-zones { + soc_thermal: soc-thermal { + polling-delay-passive = <20>; + polling-delay = <1000>; + sustainable-power = <1000>; + + thermal-sensors = <&tsadc 0>; + + trips { + threshold: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + target: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + soc_crit: soc-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + }; + }; + + }; + + tsadc: tsadc@ff250000 { + compatible = "rockchip,rk3328-tsadc"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <50000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,grf = <&grf>; + rockchip,hw-tshut-temp = <100000>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + saradc: adc@ff280000 { compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff280000 0x0 0x100>; @@ -322,6 +543,51 @@ status = "disabled"; }; + h265e_mmu: iommu@ff330200 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff330200 0 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "h265e_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + vepu_mmu: iommu@ff340800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff340800 0x0 0x40>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + vpu_mmu: iommu@ff350800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff350800 0x0 0x40>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vpu_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + rkvdec_mmu: iommu@ff360480 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rkvdec_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + vop_mmu: iommu@ff373f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff373f00 0x0 0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vop_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + cru: clock-controller@ff440000 { compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon"; reg = <0x0 0xff440000 0x0 0x1000>; @@ -374,6 +640,43 @@ <32768>; }; + usb2phy_grf: syscon@ff450000 { + compatible = "rockchip,rk3328-usb2phy-grf", "syscon", + "simple-mfd"; + reg = <0x0 0xff450000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy: usb2-phy@100 { + compatible = "rockchip,rk3328-usb2phy"; + reg = <0x100 0x10>; + clocks = <&xin24m>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy"; + #clock-cells = <0>; + assigned-clocks = <&cru USB480M>; + assigned-clock-parents = <&u2phy>; + status = "disabled"; + + u2phy_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + + u2phy_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; + }; + sdmmc: dwmmc@ff500000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff500000 0x0 0x4000>; @@ -463,6 +766,45 @@ }; }; + usb20_otg: usb@ff580000 { + compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff580000 0x0 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host0_ehci: usb@ff5c0000 { + compatible = "generic-ehci"; + reg = <0x0 0xff5c0000 0x0 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@ff5d0000 { + compatible = "generic-ohci"; + reg = <0x0 0xff5d0000 0x0 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + gic: interrupt-controller@ff811000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -649,6 +991,62 @@ }; }; + pdm-0 { + pdmm0_clk: pdmm0-clk { + rockchip,pins = <2 RK_PC2 2 &pcfg_pull_none>; + }; + + pdmm0_fsync: pdmm0-fsync { + rockchip,pins = <2 RK_PC7 2 &pcfg_pull_none>; + }; + + pdmm0_sdi0: pdmm0-sdi0 { + rockchip,pins = <2 RK_PC3 2 &pcfg_pull_none>; + }; + + pdmm0_sdi1: pdmm0-sdi1 { + rockchip,pins = <2 RK_PC4 2 &pcfg_pull_none>; + }; + + pdmm0_sdi2: pdmm0-sdi2 { + rockchip,pins = <2 RK_PC5 2 &pcfg_pull_none>; + }; + + pdmm0_sdi3: pdmm0-sdi3 { + rockchip,pins = <2 RK_PC6 2 &pcfg_pull_none>; + }; + + pdmm0_clk_sleep: pdmm0-clk-sleep { + rockchip,pins = + <2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdmm0_sdi0_sleep: pdmm0-sdi0-sleep { + rockchip,pins = + <2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdmm0_sdi1_sleep: pdmm0-sdi1-sleep { + rockchip,pins = + <2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdmm0_sdi2_sleep: pdmm0-sdi2-sleep { + rockchip,pins = + <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdmm0_sdi3_sleep: pdmm0-sdi3-sleep { + rockchip,pins = + <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdmm0_fsync_sleep: pdmm0-fsync-sleep { + rockchip,pins = + <2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + tsadc { otp_gpio: otp-gpio { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index 4772917c5f7e..a37220a9387c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -156,7 +156,6 @@ disable-wp; mmc-pwrseq = <&emmc_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index e631d424f08e..5e4d3a7015f5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -117,7 +117,6 @@ clock-frequency = <150000000>; disable-wp; non-removable; - num-slots = <1>; vmmc-supply = <&vcc_io>; vqmmc-supply = <&vcc18_flash>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index fac116acc12f..d3f6c8e0d206 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -203,7 +203,6 @@ mmc-hs200-1_2v; mmc-hs200-1_8v; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; status = "okay"; @@ -347,7 +346,6 @@ max-frequency = <50000000>; cap-sd-highspeed; card-detect-delay = <200>; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc_sd>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index ff48edd8e348..13a9e22f5d2d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -86,12 +86,10 @@ cap-mmc-highspeed; clock-frequency = <150000000>; disable-wp; - keep-power-in-suspend; mmc-hs200-1_8v; no-sdio; no-sd; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; vmmc-supply = <&vcc_io>; @@ -281,7 +279,6 @@ card-detect-delay = <200>; no-emmc; no-sdio; - num-slots = <1>; sd-uhs-sdr12; sd-uhs-sdr25; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 7134181f1dc2..b3510d56517a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -189,7 +189,6 @@ disable-wp; mmc-pwrseq = <&emmc_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; status = "okay"; @@ -254,7 +253,6 @@ keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; vmmc-supply = <&vcc_io>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 6d5dc0587e59..e0518b4bc6c2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -113,7 +113,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - + clocks = <&cru ARMCLKL>; + operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; /* min followed by max */ }; @@ -122,6 +123,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + clocks = <&cru ARMCLKL>; + operating-points-v2 = <&cluster0_opp>; }; cpu_l2: cpu@2 { @@ -129,6 +132,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + clocks = <&cru ARMCLKL>; + operating-points-v2 = <&cluster0_opp>; }; cpu_l3: cpu@3 { @@ -136,6 +141,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + clocks = <&cru ARMCLKL>; + operating-points-v2 = <&cluster0_opp>; }; cpu_b0: cpu@100 { @@ -143,7 +150,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - + clocks = <&cru ARMCLKB>; + operating-points-v2 = <&cluster1_opp>; #cooling-cells = <2>; /* min followed by max */ }; @@ -152,6 +160,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; + clocks = <&cru ARMCLKB>; + operating-points-v2 = <&cluster1_opp>; }; cpu_b2: cpu@102 { @@ -159,6 +169,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; + clocks = <&cru ARMCLKB>; + operating-points-v2 = <&cluster1_opp>; }; cpu_b3: cpu@103 { @@ -166,6 +178,62 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; + clocks = <&cru ARMCLKB>; + operating-points-v2 = <&cluster1_opp>; + }; + }; + + cluster0_opp: opp-table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <950000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000>; + }; + opp02 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + }; + opp03 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000>; + }; + opp04 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1125000>; + }; + }; + + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <950000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000>; + }; + opp02 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + }; + opp03 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <975000>; + }; + opp04 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1050000>; }; }; @@ -700,6 +768,19 @@ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; }; + spdif: spdif@ff880000 { + compatible = "rockchip,rk3368-spdif"; + reg = <0x0 0xff880000 0x0 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; + dmas = <&dmac_bus 3>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + status = "disabled"; + }; + i2s_2ch: i2s-2ch@ff890000 { compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff890000 0x0 0x1000>; @@ -724,6 +805,55 @@ status = "disabled"; }; + iep_mmu: iommu@ff900800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff900800 0x0 0x100>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "iep_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + isp_mmu: iommu@ff914000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff914000 0x0 0x100>, + <0x0 0xff915000 0x0 0x100>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "isp_mmu"; + #iommu-cells = <0>; + rockchip,disable-mmu-reset; + status = "disabled"; + }; + + vop_mmu: iommu@ff930300 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff930300 0x0 0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vop_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + hevc_mmu: iommu@ff9a0440 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff9a0440 0x0 0x40>, + <0x0 0xff9a0480 0x0 0x40>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hevc_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + vpu_mmu: iommu@ff9a0800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff9a0800 0x0 0x100>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu_mmu", "vdpu_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@ffb71000 { compatible = "arm,gic-400"; interrupt-controller; @@ -1024,6 +1154,12 @@ }; }; + spdif { + spdif_tx: spdif-tx { + rockchip,pins = <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + spi0 { spi0_clk: spi0-clk { rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 42033bcc614c..56533c344ef2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -199,7 +199,7 @@ ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn>; + pinctrl-0 = <&pcie_clkreqn_cpm>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index ba1d9810ad1e..7fd4bfcaa38e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -43,6 +43,7 @@ /dts-v1/; #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi" / { model = "Firefly-RK3399 Board"; @@ -550,7 +551,7 @@ ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn>; + pinctrl-0 = <&pcie_clkreqn_cpm>; status = "okay"; }; @@ -630,9 +631,20 @@ status = "okay"; }; +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + &sdhci { bus-width = <8>; - keep-power-in-suspend; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; non-removable; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 7bd31066399b..a3d3cea7dc4f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -264,6 +264,50 @@ ap_i2c_dig: &i2c2 { }; }; +&ppvar_bigcpu_pwm { + regulator-min-microvolt = <798674>; + regulator-max-microvolt = <1302172>; +}; + +&ppvar_bigcpu { + regulator-min-microvolt = <798674>; + regulator-max-microvolt = <1302172>; + ctrl-voltage-range = <798674 1302172>; +}; + +&ppvar_litcpu_pwm { + regulator-min-microvolt = <799065>; + regulator-max-microvolt = <1303738>; +}; + +&ppvar_litcpu { + regulator-min-microvolt = <799065>; + regulator-max-microvolt = <1303738>; + ctrl-voltage-range = <799065 1303738>; +}; + +&ppvar_gpu_pwm { + regulator-min-microvolt = <785782>; + regulator-max-microvolt = <1217729>; +}; + +&ppvar_gpu { + regulator-min-microvolt = <785782>; + regulator-max-microvolt = <1217729>; + ctrl-voltage-range = <785782 1217729>; +}; + +&ppvar_centerlogic_pwm { + regulator-min-microvolt = <800069>; + regulator-max-microvolt = <1049692>; +}; + +&ppvar_centerlogic { + regulator-min-microvolt = <800069>; + regulator-max-microvolt = <1049692>; + ctrl-voltage-range = <800069 1049692>; +}; + &saradc { status = "okay"; vref-supply = <&pp1800_ap_io>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index eb5059344023..199a5118b20d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -164,14 +164,9 @@ vin-supply = <&ppvar_sys>; }; - ppvar_bigcpu: ppvar-bigcpu { + ppvar_bigcpu_pwm: ppvar-bigcpu-pwm { compatible = "pwm-regulator"; - regulator-name = "ppvar_bigcpu"; - /* - * OVP circuit requires special handling which is not yet - * represented. Keep disabled for now. - */ - status = "disabled"; + regulator-name = "ppvar_bigcpu_pwm"; pwms = <&pwm1 0 3337 0>; pwm-supply = <&ppvar_sys>; @@ -181,18 +176,28 @@ /* EC turns on w/ ap_core_en; always on for AP */ regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <798674>; - regulator-max-microvolt = <1302172>; + regulator-min-microvolt = <800107>; + regulator-max-microvolt = <1302232>; }; - ppvar_litcpu: ppvar-litcpu { + ppvar_bigcpu: ppvar-bigcpu { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_bigcpu"; + + regulator-min-microvolt = <800107>; + regulator-max-microvolt = <1302232>; + + ctrl-supply = <&ppvar_bigcpu_pwm>; + ctrl-voltage-range = <800107 1302232>; + + regulator-settling-time-up-us = <322>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; + + ppvar_litcpu_pwm: ppvar-litcpu-pwm { compatible = "pwm-regulator"; - regulator-name = "ppvar_litcpu"; - /* - * OVP circuit requires special handling which is not yet - * represented. Keep disabled for now. - */ - status = "disabled"; + regulator-name = "ppvar_litcpu_pwm"; pwms = <&pwm2 0 3337 0>; pwm-supply = <&ppvar_sys>; @@ -202,18 +207,28 @@ /* EC turns on w/ ap_core_en; always on for AP */ regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <799065>; - regulator-max-microvolt = <1303738>; + regulator-min-microvolt = <797743>; + regulator-max-microvolt = <1307837>; }; - ppvar_gpu: ppvar-gpu { + ppvar_litcpu: ppvar-litcpu { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_litcpu"; + + regulator-min-microvolt = <797743>; + regulator-max-microvolt = <1307837>; + + ctrl-supply = <&ppvar_litcpu_pwm>; + ctrl-voltage-range = <797743 1307837>; + + regulator-settling-time-up-us = <384>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; + + ppvar_gpu_pwm: ppvar-gpu-pwm { compatible = "pwm-regulator"; - regulator-name = "ppvar_gpu"; - /* - * OVP circuit requires special handling which is not yet - * represented. Keep disabled for now. - */ - status = "disabled"; + regulator-name = "ppvar_gpu_pwm"; pwms = <&pwm0 0 3337 0>; pwm-supply = <&ppvar_sys>; @@ -223,18 +238,28 @@ /* EC turns on w/ ap_core_en; always on for AP */ regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <785782>; - regulator-max-microvolt = <1217729>; + regulator-min-microvolt = <786384>; + regulator-max-microvolt = <1217747>; }; - ppvar_centerlogic: ppvar-centerlogic { + ppvar_gpu: ppvar-gpu { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_gpu"; + + regulator-min-microvolt = <786384>; + regulator-max-microvolt = <1217747>; + + ctrl-supply = <&ppvar_gpu_pwm>; + ctrl-voltage-range = <786384 1217747>; + + regulator-settling-time-up-us = <390>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; + + ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { compatible = "pwm-regulator"; - regulator-name = "ppvar_centerlogic"; - /* - * OVP circuit requires special handling which is not yet - * represented. Keep disabled for now. - */ - status = "disabled"; + regulator-name = "ppvar_centerlogic_pwm"; pwms = <&pwm3 0 3337 0>; pwm-supply = <&ppvar_sys>; @@ -244,8 +269,23 @@ /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <800069>; - regulator-max-microvolt = <1049692>; + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + }; + + ppvar_centerlogic: ppvar-centerlogic { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_centerlogic"; + + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + + ctrl-supply = <&ppvar_centerlogic_pwm>; + ctrl-voltage-range = <799434 1049925>; + + regulator-settling-time-up-us = <378>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; }; /* Schematics call this PPVAR even though it's fixed */ @@ -555,6 +595,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&ppvar_gpu>; + status = "okay"; +}; + ap_i2c_mic: &i2c1 { status = "okay"; @@ -567,12 +612,7 @@ ap_i2c_mic: &i2c1 { headsetcodec: rt5514@57 { compatible = "realtek,rt5514"; reg = <0x57>; - interrupt-parent = <&gpio1>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mic_int>; - realtek,dmic-init-delay = <20>; - wakeup-source; + realtek,dmic-init-delay-ms = <20>; }; }; @@ -781,9 +821,13 @@ ap_i2c_audio: &i2c8 { wacky_spi_audio: spi2@0 { compatible = "realtek,rt5514"; reg = <0>; - + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; /* May run faster once verified. */ spi-max-frequency = <10000000>; + wakeup-source; }; }; @@ -1031,7 +1075,7 @@ ap_i2c_audio: &i2c8 { * hurt and dw_mmc will ignore it. We make sure to disable * the pull though so we don't burn needless power. */ - sdmmc_cd: sdmcc-cd { + sdmmc_cd: sdmmc-cd { rockchip,pins = <0 7 RK_FUNC_1 &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index be7fe635f7c1..d8a120f945c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -118,6 +118,35 @@ opp-microvolt = <1250000>; }; }; + + gpu_opp_table: opp-table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <800000>; + }; + opp01 { + opp-hz = /bits/ 64 <297000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <825000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <850000>; + }; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <925000>; + }; + opp05 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1075000>; + }; + }; }; &cpu_l0 { @@ -143,3 +172,7 @@ &cpu_b1 { operating-points-v2 = <&cluster1_opp>; }; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index c83460db130a..81617bcf2522 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -110,6 +110,35 @@ opp-microvolt = <1200000>; }; }; + + gpu_opp_table: opp-table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <800000>; + }; + opp01 { + opp-hz = /bits/ 64 <297000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <825000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <875000>; + }; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <925000>; + }; + opp05 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1100000>; + }; + }; }; &cpu_l0 { @@ -135,3 +164,7 @@ &cpu_b1 { operating-points-v2 = <&cluster1_opp>; }; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts new file mode 100644 index 000000000000..9a7486058455 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -0,0 +1,228 @@ +/* + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3399-puma.dtsi" + +/ { + model = "Theobroma Systems RK3399-Q7 SoM"; + compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>; + + sd-card-led { + label = "sd_card_led"; + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_baseboard: vcc3v3-baseboard { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c6 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2s0 { + status = "okay"; + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&haikou_pin_hog>; + + hog { + haikou_pin_hog: haikou-pin-hog { + rockchip,pins = + /* LID_BTN */ + <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + /* BATLOW# */ + <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + /* SLP_BTN# */ + <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + /* BIOS_DISABLE# */ + <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + led_sd_haikou: led-sd-gpio { + rockchip,pins = + <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = + <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v3_baseboard>; + status = "okay"; +}; + +&spi5 { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi new file mode 100644 index 000000000000..53ff3d191a1d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -0,0 +1,547 @@ +/* + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_module>; + + module-led { + label = "module_led"; + gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + }; + + /* + * Overwrite the opp-table for CPUB as this board uses a different + * regulator (FAN53555) that only allows 10mV steps and therefore + * can't reach the operation point target voltages from rk3399-opp.dtsi + */ + /delete-node/ opp-table1; + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <830000>; + opp-suspend; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <880000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <950000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1030000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1230000>; + turbo-mode; + }; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc1v2_phy: vcc1v2-phy { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2_phy"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + enable-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 0>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc1v2_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x10>; + rx_delay = <0x10>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + clock-frequency = <400000>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_ldo1: LDO_REG1 { + regulator-name = "vcc_ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_ldo5: LDO_REG5 { + regulator-name = "vcc_ldo5"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ldo6: LDO_REG6 { + regulator-name = "vcc_ldo6"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc0v9_hdmi: LDO_REG7 { + regulator-name = "vcc0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_efuse: LDO_REG8 { + regulator-name = "vcc_efuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_gpu: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1230000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&i2c7 { + status = "okay"; + clock-frequency = <400000>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c8 { + status = "okay"; + clock-frequency = <400000>; + + vdd_cpu_b: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + vin-supply = <&vcc5v0_sys>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1230000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&io_domains { + status = "okay"; + bt656-supply = <&vcc_1v8>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vcc_sd>; + gpio1830-supply = <&vcc_1v8>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pwm2 { + status = "okay"; +}; + +&pinctrl { + i2c8 { + i2c8_xfer_a: i2c8-xfer { + rockchip,pins = + <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, + <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + leds { + led_pin_module: led-module-gpio { + rockchip,pins = + <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = + <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + vqmmc = <&vcc_sd>; +}; + +&spi1 { + status = "okay"; + + norflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts new file mode 100644 index 000000000000..b7bd88fb3ae3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -0,0 +1,240 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3399-sapphire.dtsi" + +/ { + model = "Excavator-RK3399 Board"; + compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <100000>; + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <300000>; + }; + + back { + label = "Back"; + linux,code = <KEY_BACK>; + press-threshold-microvolt = <985000>; + }; + + menu { + label = "Menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <1314000>; + }; + }; + + edp_panel: edp-panel { + compatible ="lg,lp079qx1-sp0v", "simple-panel"; + backlight = <&backlight>; + enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_panel_reset>; + power-supply = <&vcc3v3_s0>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + linux,input-type = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_btn>; + wakeup-source; + }; + }; + + rt5651-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "realtek,rt5651-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Mic Jack", "MICBIAS1", + "IN1P", "Mic Jack", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + simple-audio-card,codec { + sound-dai = <&rt5651>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; +}; + +&backlight { + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&edp { + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + rt5651: rt5651@1a { + compatible = "rockchip,rt5651"; + reg = <0x1a>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; + spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + accelerometer@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&i2s2 { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwr_btn: pwr-btn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&spdif { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + #sound-dai-cells = <0>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi new file mode 100644 index 000000000000..6c30bb02210d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -0,0 +1,644 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "dt-bindings/pwm/pwm.h" +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + pwms = <&pwm0 0 25000 0>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &pmic_dvs2>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_tp: LDO_REG2 { + regulator-name = "vcc3v0_tp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sys>; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc_3v0>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + assigned-clocks = <&cru SCLK_PCIEPHY_REF>; + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; + assigned-clock-rates = <100000000>; + ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pmic_dvs2: pmic-dvs2 { + rockchip,pins = + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + keep-power-in-suspend; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + clock-frequency = <50000000>; + disable-wp; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + clock-frequency = <150000000>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 5b78ce16a87e..d79e9b3265b9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -110,6 +110,7 @@ enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKL>; + dynamic-power-coefficient = <100>; }; cpu_l1: cpu@1 { @@ -118,6 +119,7 @@ reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + dynamic-power-coefficient = <100>; }; cpu_l2: cpu@2 { @@ -126,6 +128,7 @@ reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + dynamic-power-coefficient = <100>; }; cpu_l3: cpu@3 { @@ -134,6 +137,7 @@ reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + dynamic-power-coefficient = <100>; }; cpu_b0: cpu@100 { @@ -143,6 +147,7 @@ enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKB>; + dynamic-power-coefficient = <436>; }; cpu_b1: cpu@101 { @@ -151,9 +156,15 @@ reg = <0x0 0x101>; enable-method = "psci"; clocks = <&cru ARMCLKB>; + dynamic-power-coefficient = <436>; }; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; + pmu_a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; @@ -289,6 +300,7 @@ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; resets = <&cru SRST_SDIO0>; reset-names = "reset"; status = "disabled"; @@ -402,6 +414,7 @@ snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; status = "disabled"; }; }; @@ -429,6 +442,7 @@ snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; status = "disabled"; }; }; @@ -678,6 +692,7 @@ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -950,6 +965,10 @@ }; /* These power domains are grouped by VD_LOGIC */ + pd_edp@RK3399_PD_EDP { + reg = <RK3399_PD_EDP>; + clocks = <&cru PCLK_EDP_CTRL>; + }; pd_emmc@RK3399_PD_EMMC { reg = <RK3399_PD_EMMC>; clocks = <&cru ACLK_EMMC>; @@ -967,6 +986,11 @@ <&cru SCLK_SDMMC>; pm_qos = <&qos_sd>; }; + pd_sdioaudio@RK3399_PD_SDIOAUDIO { + reg = <RK3399_PD_SDIOAUDIO>; + clocks = <&cru HCLK_SDIO>; + pm_qos = <&qos_sdioaudio>; + }; pd_vio@RK3399_PD_VIO { reg = <RK3399_PD_VIO>; #address-cells = <1>; @@ -1153,6 +1177,33 @@ status = "disabled"; }; + vpu_mmu: iommu@ff650800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff650800 0x0 0x40>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vpu_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + vdec_mmu: iommu@ff660480 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdec_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + iep_mmu: iommu@ff670800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff670800 0x0 0x40>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "iep_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + efuse0: efuse@ff690000 { compatible = "rockchip,rk3399-efuse"; reg = <0x0 0xff690000 0x0 0x80>; @@ -1387,6 +1438,7 @@ clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; pinctrl-names = "default"; pinctrl-0 = <&spdif_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -1401,6 +1453,7 @@ clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_8ch_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -1414,6 +1467,7 @@ clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_2ch_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -1425,6 +1479,224 @@ dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + status = "disabled"; + }; + + vopl: vop@ff8f0000 { + compatible = "rockchip,rk3399-vop-lit"; + reg = <0x0 0xff8f0000 0x0 0x3efc>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + assigned-clock-rates = <400000000>, <100000000>; + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + iommus = <&vopl_mmu>; + power-domains = <&power RK3399_PD_VOPL>; + resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vopl_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopl_out_mipi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_in_vopl>; + }; + + vopl_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopl>; + }; + + vopl_out_hdmi: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi_in_vopl>; + }; + }; + }; + + vopl_mmu: iommu@ff8f3f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff8f3f00 0x0 0x100>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vopl_mmu"; + clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3399_PD_VOPL>; + #iommu-cells = <0>; + status = "disabled"; + }; + + vopb: vop@ff900000 { + compatible = "rockchip,rk3399-vop-big"; + reg = <0x0 0xff900000 0x0 0x3efc>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + assigned-clock-rates = <400000000>, <100000000>; + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + iommus = <&vopb_mmu>; + power-domains = <&power RK3399_PD_VOPB>; + resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopb_out_edp: endpoint@0 { + reg = <0>; + remote-endpoint = <&edp_in_vopb>; + }; + + vopb_out_mipi: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_in_vopb>; + }; + + vopb_out_hdmi: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi_in_vopb>; + }; + }; + }; + + vopb_mmu: iommu@ff903f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff903f00 0x0 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vopb_mmu"; + clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3399_PD_VOPB>; + #iommu-cells = <0>; + status = "disabled"; + }; + + isp0_mmu: iommu@ff914000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "isp0_mmu"; + #iommu-cells = <0>; + rockchip,disable-mmu-reset; + status = "disabled"; + }; + + isp1_mmu: iommu@ff924000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "isp1_mmu"; + #iommu-cells = <0>; + rockchip,disable-mmu-reset; + status = "disabled"; + }; + + hdmi: hdmi@ff940000 { + compatible = "rockchip,rk3399-dw-hdmi"; + reg = <0x0 0xff940000 0x0 0x20000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, <&cru PLL_VPLL>, <&cru PCLK_VIO_GRF>; + clock-names = "iahb", "isfr", "vpll", "grf"; + power-domains = <&power RK3399_PD_HDCP>; + reg-io-width = <4>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; + }; + + mipi_dsi: mipi@ff960000 { + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xff960000 0x0 0x8000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_DPHY_TX0_CFG>; + clock-names = "ref", "pclk", "phy_cfg"; + power-domains = <&power RK3399_PD_VIO>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + }; + }; + + edp: edp@ff970000 { + compatible = "rockchip,rk3399-edp"; + reg = <0x0 0xff970000 0x0 0x8000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + power-domains = <&power RK3399_PD_EDP>; + resets = <&cru SRST_P_EDP_CTRL>; + reset-names = "dp"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + }; + }; + + gpu: gpu@ff9a0000 { + compatible = "rockchip,rk3399-mali", "arm,mali-t860"; + reg = <0x0 0xff9a0000 0x0 0x10000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "gpu", "job", "mmu"; + clocks = <&cru ACLK_GPU>; + power-domains = <&power RK3399_PD_GPU>; status = "disabled"; }; @@ -1788,7 +2060,7 @@ <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>; }; - sdmmc_cd: sdmcc-cd { + sdmmc_cd: sdmmc-cd { rockchip,pins = <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; }; @@ -2092,16 +2364,6 @@ }; pcie { - pcie_clkreqn: pci-clkreqn { - rockchip,pins = - <2 26 RK_FUNC_2 &pcfg_pull_none>; - }; - - pcie_clkreqnb: pci-clkreqnb { - rockchip,pins = - <4 24 RK_FUNC_1 &pcfg_pull_none>; - }; - pcie_clkreqn_cpm: pci-clkreqn-cpm { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile index 4a13a3a97101..4bc091b365fd 100644 --- a/arch/arm64/boot/dts/socionext/Makefile +++ b/arch/arm64/boot/dts/socionext/Makefile @@ -2,7 +2,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld11-global.dtb \ uniphier-ld11-ref.dtb \ uniphier-ld20-global.dtb \ - uniphier-ld20-ref.dtb + uniphier-ld20-ref.dtb \ + uniphier-pxs3-ref.dtb always := $(dtb-y) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 115357018ef7..2452b2243f42 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "uniphier-ld11.dtsi" +#include "uniphier-ld11.dtsi" / { model = "UniPhier LD11 Global Board (REF_LD11_GP)"; @@ -68,3 +68,7 @@ &usb2 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index cc8ebe34c27c..ffb473ad2e0f 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld11.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld11.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD11 Reference Board"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index bdce5b89baec..ee4aff53a5f5 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -150,6 +150,17 @@ clocks = <&peri_clk 3>; }; + adamv@57920000 { + compatible = "socionext,uniphier-ld11-adamv", + "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + adamv_rst: reset { + compatible = "socionext,uniphier-ld11-adamv-reset"; + #reset-cells = <1>; + }; + }; + i2c0: i2c@58780000 { compatible = "socionext,uniphier-fi2c"; status = "disabled"; @@ -344,6 +355,13 @@ }; }; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-ld11-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gic: interrupt-controller@5fe00000 { compatible = "arm,gic-v3"; reg = <0x5fe00000 0x10000>, /* GICD */ @@ -367,8 +385,23 @@ compatible = "socionext,uniphier-ld11-reset"; #reset-cells = <1>; }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5b"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + clocks = <&sys_clk 2>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index 9f620d4101b5..fc2bc9d75d35 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "uniphier-ld20.dtsi" +#include "uniphier-ld20.dtsi" / { model = "UniPhier LD20 Global Board (REF_LD20_GP)"; @@ -50,3 +50,7 @@ &i2c0 { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 494166aee24c..1ca0c8620dc5 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -8,9 +8,9 @@ */ /dts-v1/; -/include/ "uniphier-ld20.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-ld20.dtsi" +#include "uniphier-ref-daughter.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier LD20 Reference Board"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index de1e75362817..a29c279b6e8e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -219,6 +219,17 @@ clocks = <&peri_clk 3>; }; + adamv@57920000 { + compatible = "socionext,uniphier-ld20-adamv", + "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + adamv_rst: reset { + compatible = "socionext,uniphier-ld20-adamv-reset"; + #reset-cells = <1>; + }; + }; + i2c0: i2c@58780000 { compatible = "socionext,uniphier-fi2c"; status = "disabled"; @@ -309,7 +320,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-ld20-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; sd_clk: clock { compatible = "socionext,uniphier-ld20-sd-clock"; @@ -365,6 +376,13 @@ }; }; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-ld20-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gic: interrupt-controller@5fe00000 { compatible = "arm,gic-v3"; reg = <0x5fe00000 0x10000>, /* GICD */ @@ -388,8 +406,23 @@ compatible = "socionext,uniphier-ld20-reset"; #reset-cells = <1>; }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5b"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + clocks = <&sys_clk 2>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi index f42fb6f38bd3..9caabbb8bae3 120000..100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi @@ -1 +1 @@ -../../../../arm/boot/dts/uniphier-pinctrl.dtsi
\ No newline at end of file +#include <arm/uniphier-pinctrl.dtsi> diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts new file mode 100644 index 000000000000..d65f746a3f9d --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -0,0 +1,62 @@ +/* + * Device Tree Source for UniPhier PXs3 Reference Board + * + * Copyright (C) 2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; +#include "uniphier-pxs3.dtsi" +#include "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PXs3 Reference Board"; + compatible = "socionext,uniphier-pxs3-ref", "socionext,uniphier-pxs3"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c6 = &i2c6; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0xa0000000>; + }; +}; + +ðsc { + interrupts = <0 52 4>; +}; + +&serial0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi new file mode 100644 index 000000000000..384729fa740f --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -0,0 +1,367 @@ +/* + * Device Tree Source for UniPhier PXs3 SoC + * + * Copyright (C) 2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/memreserve/ 0x80000000 0x02000000; + +/ { + compatible = "socionext,uniphier-pxs3"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x001>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x002>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x003>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; + }; + }; + + cluster0_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + clock-latency-ns = <300>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + clock-latency-ns = <300>; + }; + opp-666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp-866667000 { + opp-hz = /bits/ 64 <866667000>; + clock-latency-ns = <300>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <300>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 4>, + <1 14 4>, + <1 11 4>, + <1 10 4>; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <100000>; + }; + + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; + + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&peri_clk 10>; + clock-frequency = <400000>; + }; + + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; + + smpctrl@59801000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; + + sdctrl@59810000 { + compatible = "socionext,uniphier-pxs3-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x400>; + + sd_clk: clock { + compatible = "socionext,uniphier-pxs3-sd-clock"; + #clock-cells = <1>; + }; + + sd_rst: reset { + compatible = "socionext,uniphier-pxs3-sd-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-pxs3-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-pxs3-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-pxs3-peri-reset"; + #reset-cells = <1>; + }; + }; + + emmc: sdhc@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&sys_clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + cdns,phy-input-delay-legacy = <4>; + cdns,phy-input-delay-mmc-highspeed = <2>; + cdns,phy-input-delay-mmc-ddr = <3>; + cdns,phy-dll-delay-sdclk = <21>; + cdns,phy-dll-delay-sdclk-hsmmc = <21>; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pxs3-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pxs3-pinctrl"; + }; + }; + + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pxs3-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gic: interrupt-controller@5fe00000 { + compatible = "arm,gic-v3"; + reg = <0x5fe00000 0x10000>, /* GICD */ + <0x5fe80000 0x80000>; /* GICR */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 4>; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-pxs3-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-pxs3-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-pxs3-reset"; + #reset-cells = <1>; + }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + }; + + nand: nand@68000000 { + compatible = "socionext,uniphier-denali-nand-v5b"; + status = "disabled"; + reg-names = "nand_data", "denali_reg"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + interrupts = <0 65 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + clocks = <&sys_clk 2>; + }; + }; +}; + +#include "uniphier-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi index 4685a8d89cba..e66d999d9f5d 120000..100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi @@ -1 +1 @@ -../../../../arm/boot/dts/uniphier-ref-daughter.dtsi
\ No newline at end of file +#include <arm/uniphier-ref-daughter.dtsi> diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi index 1246db9be2a1..28c5b4ed1d95 120000..100644 --- a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi @@ -1 +1 @@ -../../../../arm/boot/dts/uniphier-support-card.dtsi
\ No newline at end of file +#include <arm/uniphier-support-card.dtsi> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi index cdc6a437dcc7..b87b8316f4ac 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi @@ -11,7 +11,7 @@ * the License, or (at your option) any later version. */ -&amba { +/ { misc_clk: misc_clk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -29,12 +29,60 @@ #clock-cells = <0>; clock-frequency = <75000000>; }; + + clk100: clk100 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + clk600: clk600 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + }; }; &can0 { clocks = <&misc_clk &misc_clk>; }; +&can1 { + clocks = <&misc_clk &misc_clk>; +}; + +&fpd_dma_chan1 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan2 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan3 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan4 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan5 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan6 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan7 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan8 { + clocks = <&clk600>, <&clk100>; +}; + &gem0 { clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index ef1b9e573af0..bf552674a834 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -13,13 +13,15 @@ /dts-v1/; -/include/ "zynqmp.dtsi" -/include/ "zynqmp-ep108-clk.dtsi" +#include "zynqmp.dtsi" +#include "zynqmp-ep108-clk.dtsi" / { model = "ZynqMP EP108"; aliases { + mmc0 = &sdhci0; + mmc1 = &sdhci1; serial0 = &uart0; }; @@ -37,6 +39,10 @@ status = "okay"; }; +&can1 { + status = "okay"; +}; + &gem0 { status = "okay"; phy-handle = <&phy0>; @@ -55,7 +61,7 @@ status = "okay"; clock-frequency = <400000>; eeprom@54 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; reg = <0x54>; }; }; @@ -64,7 +70,7 @@ status = "okay"; clock-frequency = <400000>; eeprom@55 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; reg = <0x55>; }; }; @@ -92,7 +98,7 @@ spi-max-frequency = <50000000>; reg = <0>; - spi0_flash0@00000000 { + spi0_flash0@0 { label = "spi0_flash0"; reg = <0x0 0x100000>; }; @@ -109,7 +115,7 @@ spi-max-frequency = <50000000>; reg = <0>; - spi1_flash0@00000000 { + spi1_flash0@0 { label = "spi1_flash0"; reg = <0x0 0x100000>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 54dc28351c8c..7665fbddff28 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -20,33 +20,84 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; reg = <0x0>; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; enable-method = "psci"; reg = <0x1>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; enable-method = "psci"; reg = <0x2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; enable-method = "psci"; reg = <0x3>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP_0>; }; + + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <600>; + min-residency-us = <10000>; + }; + }; + }; + + cpu_opp_table: cpu_opp_table { + compatible = "operating-points-v2"; + opp-shared; + opp00 { + opp-hz = /bits/ 64 <1199999988>; + opp-microvolt = <1000000>; + clock-latency-ns = <500000>; + }; + opp01 { + opp-hz = /bits/ 64 <599999994>; + opp-microvolt = <1000000>; + clock-latency-ns = <500000>; + }; + opp02 { + opp-hz = /bits/ 64 <399999996>; + opp-microvolt = <1000000>; + clock-latency-ns = <500000>; + }; + opp03 { + opp-hz = /bits/ 64 <299999997>; + opp-microvolt = <1000000>; + clock-latency-ns = <500000>; + }; + }; + + dcc: dcc { + compatible = "arm,dcc"; + status = "disabled"; }; pmu { @@ -119,6 +170,190 @@ rx-fifo-depth = <0x40>; }; + cci: cci@fd6e0000 { + compatible = "arm,cci-400"; + reg = <0x0 0xfd6e0000 0x0 0x9000>; + ranges = <0x0 0x0 0xfd6e0000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupt-parent = <&gic>; + interrupts = <0 123 4>, + <0 123 4>, + <0 123 4>, + <0 123 4>, + <0 123 4>; + }; + }; + + /* GDMA */ + fpd_dma_chan1: dma@fd500000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd500000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 124 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan2: dma@fd510000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd510000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 125 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan3: dma@fd520000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd520000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 126 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan4: dma@fd530000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd530000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 127 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan5: dma@fd540000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd540000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 128 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan6: dma@fd550000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd550000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 129 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan7: dma@fd560000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd560000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 130 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan8: dma@fd570000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd570000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 131 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <128>; + }; + + /* LPDDMA default allows only secured access. inorder to enable + * These dma channels, Users should ensure that these dma + * Channels are allowed for non secure access. + */ + lpd_dma_chan1: dma@ffa80000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffa80000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 77 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan2: dma@ffa90000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffa90000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 78 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan3: dma@ffaa0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffaa0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 79 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan4: dma@ffab0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffab0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 80 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan5: dma@ffac0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffac0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 81 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan6: dma@ffad0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffad0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 82 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan7: dma@ffae0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffae0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 83 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan8: dma@ffaf0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffaf0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 84 4>; + clock-names = "clk_main", "clk_apb"; + xlnx,bus-width = <64>; + }; + gem0: ethernet@ff0b0000 { compatible = "cdns,gem"; status = "disabled"; @@ -215,12 +450,9 @@ <0x0 0xfd480000 0x0 0x1000>, <0x80 0x00000000 0x0 0x1000000>; reg-names = "breg", "pcireg", "cfg"; - ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 - 0xe0000000 0x00000000 0x10000000 - /* non-prefetchable memory */ - 0x43000000 0x00000006 0x00000000 0x00000006 - 0x00000000 0x00000002 0x00000000>; - /* prefetchable memory */ + ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */ + 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ + bus-range = <0x00 0xff>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, @@ -233,6 +465,16 @@ }; }; + rtc: rtc@ffa60000 { + compatible = "xlnx,zynqmp-rtc"; + status = "disabled"; + reg = <0x0 0xffa60000 0x0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 26 4>, <0 27 4>; + interrupt-names = "alarm", "sec"; + calibration = <0x8000>; + }; + sata: ahci@fd0c0000 { compatible = "ceva,ahci-1v84"; status = "disabled"; @@ -262,13 +504,14 @@ smmu: smmu@fd800000 { compatible = "arm,mmu-500"; reg = <0x0 0xfd800000 0x0 0x20000>; + status = "disabled"; #global-interrupts = <1>; interrupt-parent = <&gic>; - interrupts = <0 157 4>, - <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, - <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, - <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, - <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>; + interrupts = <0 155 4>, + <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, + <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, + <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, + <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>; }; spi0: spi@ff040000 { @@ -330,7 +573,7 @@ }; uart0: serial@ff000000 { - compatible = "cdns,uart-r1p8"; + compatible = "cdns,uart-r1p12", "xlnx,xuartps"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 21 4>; @@ -339,7 +582,7 @@ }; uart1: serial@ff010000 { - compatible = "cdns,uart-r1p8"; + compatible = "cdns,uart-r1p12", "xlnx,xuartps"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 22 4>; diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile index 667806620f59..d86c4def6bc9 100644 --- a/arch/arm64/boot/dts/zte/Makefile +++ b/arch/arm64/boot/dts/zte/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb +dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts index bb900d2bbcfb..cb2519ecd724 100644 --- a/arch/arm64/boot/dts/zte/zx296718-evb.dts +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts @@ -57,16 +57,28 @@ reg = <0x40000000 0x40000000>; }; - sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "zx_snd_spdif0"; + sound-spdif0 { + compatible = "audio-graph-card"; + dais = <&spdif0_port>; + }; - simple-audio-card,cpu { - sound-dai = <&spdif0>; - }; + sound-i2s0 { + compatible = "audio-graph-card"; + dais = <&i2s0_port>; + pinctrl-names = "default"; + pinctrl-0 = <&lifier_pins>; + pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>; + widgets = "Line", "Line Out Jack"; + routing = "Amplifier", "LINEOUTL", + "Amplifier", "LINEOUTR", + "Line Out Jack", "Amplifier"; + }; +}; - simple-audio-card,codec { - sound-dai = <&hdmi>; +&aud96p22 { + port { + aud96p22_endpoint: endpoint { + remote-endpoint = <&i2s0_endpoint>; }; }; }; @@ -77,6 +89,36 @@ &hdmi { status = "okay"; + + port { + hdmi_endpoint: endpoint { + remote-endpoint = <&spdif0_endpoint>; + }; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2s0 { + status = "okay"; + + i2s0_port: port { + i2s0_endpoint: endpoint { + remote-endpoint = <&aud96p22_endpoint>; + dai-format = "i2s"; + frame-master; + bitclock-master; + }; + }; +}; + +&pmm { + amplifier_pins: amplifier { + pins = "TSI3_DATA"; + function = "BGPIO"; + }; }; &sd1 { @@ -85,6 +127,16 @@ &spdif0 { status = "okay"; + + spdif0_port: port { + spdif0_endpoint: endpoint { + remote-endpoint = <&hdmi_endpoint>; + }; + }; +}; + +&tvenc { + status = "okay"; }; &uart0 { diff --git a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts new file mode 100644 index 000000000000..e02509f7082b --- /dev/null +++ b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2017 Sanechips Technology Co., Ltd. + * Copyright 2017 Linaro Ltd. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; +#include "zx296718.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "ZTE ZX296718 PCBOX Board"; + compatible = "zte,zx296718-pcbox", "zte,zx296718"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + a53_vdd0v9: regulator-a53 { + compatible = "pwm-regulator"; + pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>; + regulator-name = "A53_VDD0V9"; + regulator-min-microvolt = <855000>; + regulator-max-microvolt = <1183000>; + pwm-dutycycle-unit = <100>; + pwm-dutycycle-range = <0 100>; + regulator-always-on; + regulator-boot-on; + }; + + sound-spdif0 { + compatible = "audio-graph-card"; + dais = <&spdif0_port>; + }; + + sound-i2s0 { + compatible = "audio-graph-card"; + dais = <&i2s0_port>; + }; +}; + +&aud96p22 { + port { + aud96p22_endpoint: endpoint { + remote-endpoint = <&i2s0_endpoint>; + }; + }; +}; + +&cpu0 { + cpu-supply = <&a53_vdd0v9>; +}; + +&emmc { + status = "okay"; +}; + +&hdmi { + status = "disabled"; + + port { + hdmi_endpoint: endpoint { + remote-endpoint = <&spdif0_endpoint>; + }; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2s0 { + status = "okay"; + + i2s0_port: port { + i2s0_endpoint: endpoint { + remote-endpoint = <&aud96p22_endpoint>; + dai-format = "i2s"; + frame-master; + bitclock-master; + }; + }; +}; + +&irdec { + status = "okay"; +}; + +&pmm { + pwm3_pins: pwm3 { + pins = "KEY_ROW2"; + function = "PWM"; + }; + + vga_pins: vga { + pins = "KEY_COL1", "KEY_COL2", "VGA_HS", "VGA_VS"; + function = "VGA"; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins>; + status = "okay"; +}; + +&sd0 { + status = "okay"; +}; + +&sd1 { + status = "okay"; +}; + +&spdif0 { + status = "okay"; + + spdif0_port: port { + spdif0_endpoint: endpoint { + remote-endpoint = <&hdmi_endpoint>; + }; + }; +}; + +&tvenc { + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +&vga { + pinctrl-names = "default"; + pinctrl-0 = <&vga_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index d83bf789c864..6eef64761009 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -53,6 +53,13 @@ interrupt-parent = <&gic>; aliases { + gpio0 = &bgpio0; + gpio1 = &bgpio1; + gpio2 = &bgpio2; + gpio3 = &bgpio3; + gpio4 = &bgpio4; + gpio5 = &bgpio5; + gpio6 = &bgpio6; serial0 = &uart0; }; @@ -120,26 +127,31 @@ opp-500000000 { opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <866000>; clock-latency-ns = <500000>; }; opp-648000000 { opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <866000>; clock-latency-ns = <500000>; }; opp-800000000 { opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <888000>; clock-latency-ns = <500000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <898000>; clock-latency-ns = <500000>; }; opp-1188000000 { opp-hz = /bits/ 64 <1188000000>; + opp-microvolt = <1015000>; clock-latency-ns = <500000>; }; }; @@ -283,11 +295,23 @@ compatible = "simple-bus"; ranges; + irdec: ir-decoder@111000 { + compatible = "zte,zx296718-irdec"; + reg = <0x111000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + aon_sysctrl: aon-sysctrl@116000 { compatible = "zte,zx296718-aon-sysctrl", "syscon"; reg = <0x116000 0x1000>; }; + iocfg: pin-controller@119000 { + compatible = "zte,zx296718-iocfg"; + reg = <0x119000 0x1000>; + }; + uart0: uart@11f000 { compatible = "arm,pl011", "arm,primecell"; arm,primecell-periphid = <0x001feffe>; @@ -311,7 +335,6 @@ clock-frequency = <50000000>; clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; clock-names = "biu", "ciu"; - num-slots = <1>; max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; @@ -336,7 +359,6 @@ clock-frequency = <167000000>; clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>; clock-names = "biu", "ciu"; - num-slots = <1>; max-frequency = <167000000>; cap-sdio-irq; cap-sd-highspeed; @@ -360,12 +382,109 @@ #clock-cells = <1>; }; + bgpio0: gpio@142d000 { + compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; + reg = <0x142d000 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm 0 48 16>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + bgpio1: gpio@142d040 { + compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; + reg = <0x142d040 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm 0 80 16>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + bgpio2: gpio@142d080 { + compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; + reg = <0x142d080 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm 0 80 3 + &pmm 3 32 4 + &pmm 7 83 9>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + bgpio3: gpio@142d0c0 { + compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; + reg = <0x142d0c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm 0 92 16>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + bgpio4: gpio@142d100 { + compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; + reg = <0x142d100 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm 0 108 12 + &pmm 12 121 4>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + bgpio5: gpio@142d140 { + compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; + reg = <0x142d140 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm 0 125 16>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + bgpio6: gpio@142d180 { + compatible = "zte,zx296718-gpio", "zte,zx296702-gpio"; + reg = <0x142d180 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmm 0 141 2>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + }; + lsp1crm: clock-controller@1430000 { compatible = "zte,zx296718-lsp1crm"; reg = <0x01430000 0x1000>; #clock-cells = <1>; }; + pwm: pwm@1439000 { + compatible = "zte,zx296718-pwm"; + reg = <0x1439000 0x1000>; + clocks = <&lsp1crm LSP1_PWM_PCLK>, + <&lsp1crm LSP1_PWM_WCLK>; + clock-names = "pclk", "wclk"; + #pwm-cells = <3>; + status = "disabled"; + }; + vou: vou@1440000 { compatible = "zte,zx296718-vou"; #address-cells = <1>; @@ -387,6 +506,16 @@ "main_wclk", "aux_wclk"; }; + vga: vga@8000 { + compatible = "zte,zx296718-vga"; + reg = <0x8000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topcrm VGA_I2C_WCLK>; + clock-names = "i2c_wclk"; + zte,vga-power-control = <&sysctrl 0x170 0xe0>; + status = "disabled"; + }; + hdmi: hdmi@c000 { compatible = "zte,zx296718-hdmi"; reg = <0xc000 0x4000>; @@ -413,6 +542,12 @@ #clock-cells = <1>; }; + pmm: pin-controller@1462000 { + compatible = "zte,zx296718-pmm"; + reg = <0x1462000 0x1000>; + zte,auxiliary-controller = <&iocfg>; + }; + sysctrl: sysctrl@1463000 { compatible = "zte,zx296718-sysctrl", "syscon"; reg = <0x1463000 0x1000>; @@ -445,6 +580,38 @@ #clock-cells = <1>; }; + i2s0: i2s@1482000 { + compatible = "zte,zx296718-i2s", "zte,zx296702-i2s"; + reg = <0x01482000 0x1000>; + clocks = <&audiocrm AUDIO_I2S0_WCLK>, + <&audiocrm AUDIO_I2S0_PCLK>; + clock-names = "wclk", "pclk"; + assigned-clocks = <&audiocrm I2S0_WCLK_MUX>; + assigned-clock-parents = <&topcrm AUDIO_99M>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 22>, <&dma 23>; + dma-names = "tx", "rx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@1486000 { + compatible = "zte,zx296718-i2c"; + reg = <0x01486000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&audiocrm AUDIO_I2C0_WCLK>; + clock-frequency = <1600000>; + status = "disabled"; + + aud96p22: codec@22 { + compatible = "zte,zx-aud96p22"; + #sound-dai-cells = <0>; + reg = <0x22>; + }; + }; + spdif0: spdif@1488000 { compatible = "zte,zx296702-spdif"; reg = <0x1488000 0x1000>; diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index a7ea5f3da89d..964489b39f6a 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -1188,6 +1188,7 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = { [CLKID_32K_CLK] = &gxbb_32k_clk.hw, [CLKID_32K_CLK_SEL] = &gxbb_32k_clk_sel.hw, [CLKID_32K_CLK_DIV] = &gxbb_32k_clk_div.hw, + [NR_CLKS] = NULL, }, .num = NR_CLKS, }; @@ -1310,6 +1311,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = { [CLKID_32K_CLK] = &gxbb_32k_clk.hw, [CLKID_32K_CLK_SEL] = &gxbb_32k_clk_sel.hw, [CLKID_32K_CLK_DIV] = &gxbb_32k_clk_div.hw, + [NR_CLKS] = NULL, }, .num = NR_CLKS, }; diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index d63e77e8433d..5b1d4b374d1c 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -167,130 +167,33 @@ * CLKID index values * * These indices are entirely contrived and do not map onto the hardware. - * Migrate them out of this header and into the DT header file when they need - * to be exposed to client nodes in DT: include/dt-bindings/clock/gxbb-clkc.h + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. */ -#define CLKID_SYS_PLL 0 /* ID 1 is unused (it was used by the non-existing CLKID_CPUCLK before) */ -/* CLKID_HDMI_PLL */ -#define CLKID_FIXED_PLL 3 -/* CLKID_FCLK_DIV2 */ -/* CLKID_FCLK_DIV3 */ -/* CLKID_FCLK_DIV4 */ -#define CLKID_FCLK_DIV5 7 -#define CLKID_FCLK_DIV7 8 -/* CLKID_GP0_PLL */ #define CLKID_MPEG_SEL 10 #define CLKID_MPEG_DIV 11 -/* CLKID_CLK81 */ -#define CLKID_MPLL0 13 -#define CLKID_MPLL1 14 -/* CLKID_MPLL2 */ -#define CLKID_DDR 16 -#define CLKID_DOS 17 -#define CLKID_ISA 18 -#define CLKID_PL301 19 -#define CLKID_PERIPHS 20 -/* CLKID_SPICC */ -/* CLKID_I2C */ -/* #define CLKID_SAR_ADC */ -#define CLKID_SMART_CARD 24 -/* CLKID_RNG0 */ -/* CLKID_UART0 */ -#define CLKID_SDHC 27 -#define CLKID_STREAM 28 -#define CLKID_ASYNC_FIFO 29 -#define CLKID_SDIO 30 -#define CLKID_ABUF 31 -#define CLKID_HIU_IFACE 32 -#define CLKID_ASSIST_MISC 33 -/* CLKID_SPI */ -#define CLKID_I2S_SPDIF 35 -/* CLKID_ETH */ -#define CLKID_DEMUX 37 -/* CLKID_AIU_GLUE */ -/* CLKID_IEC958 */ -/* CLKID_I2S_OUT */ -#define CLKID_AMCLK 41 -#define CLKID_AIFIFO2 42 -#define CLKID_MIXER 43 -/* CLKID_MIXER_IFACE */ -#define CLKID_ADC 45 -#define CLKID_BLKMV 46 -/* CLKID_AIU */ -/* CLKID_UART1 */ -#define CLKID_G2D 49 -/* CLKID_USB0 */ -/* CLKID_USB1 */ -#define CLKID_RESET 52 -#define CLKID_NAND 53 -#define CLKID_DOS_PARSER 54 -/* CLKID_USB */ -#define CLKID_VDIN1 56 -#define CLKID_AHB_ARB0 57 -#define CLKID_EFUSE 58 -#define CLKID_BOOT_ROM 59 -#define CLKID_AHB_DATA_BUS 60 -#define CLKID_AHB_CTRL_BUS 61 -#define CLKID_HDMI_INTR_SYNC 62 -/* CLKID_HDMI_PCLK */ -/* CLKID_USB1_DDR_BRIDGE */ -/* CLKID_USB0_DDR_BRIDGE */ -#define CLKID_MMC_PCLK 66 -#define CLKID_DVIN 67 -/* CLKID_UART2 */ -/* #define CLKID_SANA */ -#define CLKID_VPU_INTR 70 -#define CLKID_SEC_AHB_AHB3_BRIDGE 71 -#define CLKID_CLK81_A53 72 -#define CLKID_VCLK2_VENCI0 73 -#define CLKID_VCLK2_VENCI1 74 -#define CLKID_VCLK2_VENCP0 75 -#define CLKID_VCLK2_VENCP1 76 -/* CLKID_GCLK_VENCI_INT0 */ -#define CLKID_GCLK_VENCI_INT 78 -#define CLKID_DAC_CLK 79 -/* CLKID_AOCLK_GATE */ -/* CLKID_IEC958_GATE */ -#define CLKID_ENC480P 82 -#define CLKID_RNG1 83 -#define CLKID_GCLK_VENCI_INT1 84 -#define CLKID_VCLK2_VENCLMCC 85 -#define CLKID_VCLK2_VENCL 86 -#define CLKID_VCLK_OTHER 87 -#define CLKID_EDP 88 -#define CLKID_AO_MEDIA_CPU 89 -#define CLKID_AO_AHB_SRAM 90 -#define CLKID_AO_AHB_BUS 91 -#define CLKID_AO_IFACE 92 -/* CLKID_AO_I2C */ -/* CLKID_SD_EMMC_A */ -/* CLKID_SD_EMMC_B */ -/* CLKID_SD_EMMC_C */ -/* CLKID_SAR_ADC_CLK */ -/* CLKID_SAR_ADC_SEL */ #define CLKID_SAR_ADC_DIV 99 -/* CLKID_MALI_0_SEL */ -#define CLKID_MALI_0_DIV 101 -/* CLKID_MALI_0 */ -/* CLKID_MALI_1_SEL */ -#define CLKID_MALI_1_DIV 104 -/* CLKID_MALI_1 */ -/* CLKID_MALI */ -/* CLKID_CTS_AMCLK */ +#define CLKID_MALI_0_DIV 101 +#define CLKID_MALI_1_DIV 104 #define CLKID_CTS_AMCLK_SEL 108 #define CLKID_CTS_AMCLK_DIV 109 -/* CLKID_CTS_MCLK_I958 */ #define CLKID_CTS_MCLK_I958_SEL 111 #define CLKID_CTS_MCLK_I958_DIV 112 -/* CLKID_CTS_I958 */ -#define CLKID_32K_CLK 114 #define CLKID_32K_CLK_SEL 115 #define CLKID_32K_CLK_DIV 116 +#define CLKID_SD_EMMC_A_CLK0_SEL 117 +#define CLKID_SD_EMMC_A_CLK0_DIV 118 +#define CLKID_SD_EMMC_B_CLK0_SEL 120 +#define CLKID_SD_EMMC_B_CLK0_DIV 121 +#define CLKID_SD_EMMC_C_CLK0_SEL 123 +#define CLKID_SD_EMMC_C_CLK0_DIV 124 -#define NR_CLKS 117 +#define NR_CLKS 126 -/* include the CLKIDs that have been made part of the stable DT binding */ +/* include the CLKIDs that have been made part of the DT binding */ #include <dt-bindings/clock/gxbb-clkc.h> #endif /* __GXBB_H */ diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 6ec512ad2598..cb60a516ca82 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -590,6 +590,7 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = { [CLKID_MPLL0] = &meson8b_mpll0.hw, [CLKID_MPLL1] = &meson8b_mpll1.hw, [CLKID_MPLL2] = &meson8b_mpll2.hw, + [CLK_NR_CLKS] = NULL, }, .num = CLK_NR_CLKS, }; diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h index a687e02547dc..c139bb3273ca 100644 --- a/drivers/clk/meson/meson8b.h +++ b/drivers/clk/meson/meson8b.h @@ -60,107 +60,12 @@ * CLKID index values * * These indices are entirely contrived and do not map onto the hardware. - * Migrate them out of this header and into the DT header file when they need - * to be exposed to client nodes in DT: include/dt-bindings/clock/meson8b-clkc.h + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. */ -/* CLKID_UNUSED */ -/* CLKID_XTAL */ -/* CLKID_PLL_FIXED */ -/* CLKID_PLL_VID */ -/* CLKID_PLL_SYS */ -/* CLKID_FCLK_DIV2 */ -/* CLKID_FCLK_DIV3 */ -/* CLKID_FCLK_DIV4 */ -/* CLKID_FCLK_DIV5 */ -/* CLKID_FCLK_DIV7 */ -/* CLKID_CLK81 */ -/* CLKID_MALI */ -/* CLKID_CPUCLK */ -/* CLKID_ZERO */ -/* CLKID_MPEG_SEL */ -/* CLKID_MPEG_DIV */ -#define CLKID_DDR 16 -#define CLKID_DOS 17 -#define CLKID_ISA 18 -#define CLKID_PL301 19 -#define CLKID_PERIPHS 20 -#define CLKID_SPICC 21 -#define CLKID_I2C 22 -/* #define CLKID_SAR_ADC */ -#define CLKID_SMART_CARD 24 -/* #define CLKID_RNG0 */ -#define CLKID_UART0 26 -#define CLKID_SDHC 27 -#define CLKID_STREAM 28 -#define CLKID_ASYNC_FIFO 29 -/* #define CLKID_SDIO */ -#define CLKID_ABUF 31 -#define CLKID_HIU_IFACE 32 -#define CLKID_ASSIST_MISC 33 -#define CLKID_SPI 34 -#define CLKID_I2S_SPDIF 35 -/* #define CLKID_ETH */ -#define CLKID_DEMUX 37 -#define CLKID_AIU_GLUE 38 -#define CLKID_IEC958 39 -#define CLKID_I2S_OUT 40 -#define CLKID_AMCLK 41 -#define CLKID_AIFIFO2 42 -#define CLKID_MIXER 43 -#define CLKID_MIXER_IFACE 44 -#define CLKID_ADC 45 -#define CLKID_BLKMV 46 -#define CLKID_AIU 47 -#define CLKID_UART1 48 -#define CLKID_G2D 49 -/* #define CLKID_USB0 */ -/* #define CLKID_USB1 */ -#define CLKID_RESET 52 -#define CLKID_NAND 53 -#define CLKID_DOS_PARSER 54 -/* #define CLKID_USB */ -#define CLKID_VDIN1 56 -#define CLKID_AHB_ARB0 57 -#define CLKID_EFUSE 58 -#define CLKID_BOOT_ROM 59 -#define CLKID_AHB_DATA_BUS 60 -#define CLKID_AHB_CTRL_BUS 61 -#define CLKID_HDMI_INTR_SYNC 62 -#define CLKID_HDMI_PCLK 63 -/* CLKID_USB1_DDR_BRIDGE */ -/* CLKID_USB0_DDR_BRIDGE */ -#define CLKID_MMC_PCLK 66 -#define CLKID_DVIN 67 -#define CLKID_UART2 68 -/* #define CLKID_SANA */ -#define CLKID_VPU_INTR 70 -#define CLKID_SEC_AHB_AHB3_BRIDGE 71 -#define CLKID_CLK81_A9 72 -#define CLKID_VCLK2_VENCI0 73 -#define CLKID_VCLK2_VENCI1 74 -#define CLKID_VCLK2_VENCP0 75 -#define CLKID_VCLK2_VENCP1 76 -#define CLKID_GCLK_VENCI_INT 77 -#define CLKID_GCLK_VENCP_INT 78 -#define CLKID_DAC_CLK 79 -#define CLKID_AOCLK_GATE 80 -#define CLKID_IEC958_GATE 81 -#define CLKID_ENC480P 82 -#define CLKID_RNG1 83 -#define CLKID_GCLK_VENCL_INT 84 -#define CLKID_VCLK2_VENCLMCC 85 -#define CLKID_VCLK2_VENCL 86 -#define CLKID_VCLK2_OTHER 87 -#define CLKID_EDP 88 -#define CLKID_AO_MEDIA_CPU 89 -#define CLKID_AO_AHB_SRAM 90 -#define CLKID_AO_AHB_BUS 91 -#define CLKID_AO_IFACE 92 -#define CLKID_MPLL0 93 -#define CLKID_MPLL1 94 -#define CLKID_MPLL2 95 - #define CLK_NR_CLKS 96 /* include the CLKIDs that have been made part of the stable DT binding */ diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h index 31751482d13c..9d15e2221fdb 100644 --- a/include/dt-bindings/clock/gxbb-aoclkc.h +++ b/include/dt-bindings/clock/gxbb-aoclkc.h @@ -62,5 +62,6 @@ #define CLKID_AO_UART1 3 #define CLKID_AO_UART2 4 #define CLKID_AO_IR_BLASTER 5 +#define CLKID_AO_CEC_32K 6 #endif diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index e3e9f7919c31..c04a76d8facf 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -5,37 +5,96 @@ #ifndef __GXBB_CLKC_H #define __GXBB_CLKC_H +#define CLKID_SYS_PLL 0 #define CLKID_HDMI_PLL 2 +#define CLKID_FIXED_PLL 3 #define CLKID_FCLK_DIV2 4 #define CLKID_FCLK_DIV3 5 #define CLKID_FCLK_DIV4 6 +#define CLKID_FCLK_DIV5 7 +#define CLKID_FCLK_DIV7 8 #define CLKID_GP0_PLL 9 #define CLKID_CLK81 12 +#define CLKID_MPLL0 13 +#define CLKID_MPLL1 14 #define CLKID_MPLL2 15 +#define CLKID_DDR 16 +#define CLKID_DOS 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 #define CLKID_SPICC 21 #define CLKID_I2C 22 #define CLKID_SAR_ADC 23 +#define CLKID_SMART_CARD 24 #define CLKID_RNG0 25 #define CLKID_UART0 26 +#define CLKID_SDHC 27 +#define CLKID_STREAM 28 +#define CLKID_ASYNC_FIFO 29 +#define CLKID_SDIO 30 +#define CLKID_ABUF 31 +#define CLKID_HIU_IFACE 32 +#define CLKID_ASSIST_MISC 33 #define CLKID_SPI 34 #define CLKID_ETH 36 +#define CLKID_I2S_SPDIF 35 +#define CLKID_DEMUX 37 #define CLKID_AIU_GLUE 38 #define CLKID_IEC958 39 #define CLKID_I2S_OUT 40 +#define CLKID_AMCLK 41 +#define CLKID_AIFIFO2 42 +#define CLKID_MIXER 43 #define CLKID_MIXER_IFACE 44 +#define CLKID_ADC 45 +#define CLKID_BLKMV 46 #define CLKID_AIU 47 #define CLKID_UART1 48 +#define CLKID_G2D 49 #define CLKID_USB0 50 #define CLKID_USB1 51 +#define CLKID_RESET 52 +#define CLKID_NAND 53 +#define CLKID_DOS_PARSER 54 #define CLKID_USB 55 +#define CLKID_VDIN1 56 +#define CLKID_AHB_ARB0 57 +#define CLKID_EFUSE 58 +#define CLKID_BOOT_ROM 59 +#define CLKID_AHB_DATA_BUS 60 +#define CLKID_AHB_CTRL_BUS 61 +#define CLKID_HDMI_INTR_SYNC 62 #define CLKID_HDMI_PCLK 63 #define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_MMC_PCLK 66 +#define CLKID_DVIN 67 #define CLKID_UART2 68 #define CLKID_SANA 69 +#define CLKID_VPU_INTR 70 +#define CLKID_SEC_AHB_AHB3_BRIDGE 71 +#define CLKID_CLK81_A53 72 +#define CLKID_VCLK2_VENCI0 73 +#define CLKID_VCLK2_VENCI1 74 +#define CLKID_VCLK2_VENCP0 75 +#define CLKID_VCLK2_VENCP1 76 #define CLKID_GCLK_VENCI_INT0 77 +#define CLKID_GCLK_VENCI_INT 78 +#define CLKID_DAC_CLK 79 #define CLKID_AOCLK_GATE 80 #define CLKID_IEC958_GATE 81 +#define CLKID_ENC480P 82 +#define CLKID_RNG1 83 +#define CLKID_GCLK_VENCI_INT1 84 +#define CLKID_VCLK2_VENCLMCC 85 +#define CLKID_VCLK2_VENCL 86 +#define CLKID_VCLK_OTHER 87 +#define CLKID_EDP 88 +#define CLKID_AO_MEDIA_CPU 89 +#define CLKID_AO_AHB_SRAM 90 +#define CLKID_AO_AHB_BUS 91 +#define CLKID_AO_IFACE 92 #define CLKID_AO_I2C 93 #define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_B 95 @@ -50,5 +109,9 @@ #define CLKID_CTS_AMCLK 107 #define CLKID_CTS_MCLK_I958 110 #define CLKID_CTS_I958 113 +#define CLKID_32K_CLK 114 +#define CLKID_SD_EMMC_A_CLK0 119 +#define CLKID_SD_EMMC_B_CLK0 122 +#define CLKID_SD_EMMC_C_CLK0 125 #endif /* __GXBB_CLKC_H */ diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h index e29227fb52a1..a9c0306330b6 100644 --- a/include/dt-bindings/clock/meson8b-clkc.h +++ b/include/dt-bindings/clock/meson8b-clkc.h @@ -21,15 +21,85 @@ #define CLKID_ZERO 13 #define CLKID_MPEG_SEL 14 #define CLKID_MPEG_DIV 15 +#define CLKID_DDR 16 +#define CLKID_DOS 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 +#define CLKID_SPICC 21 +#define CLKID_I2C 22 #define CLKID_SAR_ADC 23 +#define CLKID_SMART_CARD 24 #define CLKID_RNG0 25 +#define CLKID_UART0 26 +#define CLKID_SDHC 27 +#define CLKID_STREAM 28 +#define CLKID_ASYNC_FIFO 29 #define CLKID_SDIO 30 +#define CLKID_ABUF 31 +#define CLKID_HIU_IFACE 32 +#define CLKID_ASSIST_MISC 33 +#define CLKID_SPI 34 +#define CLKID_I2S_SPDIF 35 #define CLKID_ETH 36 +#define CLKID_DEMUX 37 +#define CLKID_AIU_GLUE 38 +#define CLKID_IEC958 39 +#define CLKID_I2S_OUT 40 +#define CLKID_AMCLK 41 +#define CLKID_AIFIFO2 42 +#define CLKID_MIXER 43 +#define CLKID_MIXER_IFACE 44 +#define CLKID_ADC 45 +#define CLKID_BLKMV 46 +#define CLKID_AIU 47 +#define CLKID_UART1 48 +#define CLKID_G2D 49 #define CLKID_USB0 50 #define CLKID_USB1 51 +#define CLKID_RESET 52 +#define CLKID_NAND 53 +#define CLKID_DOS_PARSER 54 #define CLKID_USB 55 +#define CLKID_VDIN1 56 +#define CLKID_AHB_ARB0 57 +#define CLKID_EFUSE 58 +#define CLKID_BOOT_ROM 59 +#define CLKID_AHB_DATA_BUS 60 +#define CLKID_AHB_CTRL_BUS 61 +#define CLKID_HDMI_INTR_SYNC 62 +#define CLKID_HDMI_PCLK 63 #define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_MMC_PCLK 66 +#define CLKID_DVIN 67 +#define CLKID_UART2 68 #define CLKID_SANA 69 +#define CLKID_VPU_INTR 70 +#define CLKID_SEC_AHB_AHB3_BRIDGE 71 +#define CLKID_CLK81_A9 72 +#define CLKID_VCLK2_VENCI0 73 +#define CLKID_VCLK2_VENCI1 74 +#define CLKID_VCLK2_VENCP0 75 +#define CLKID_VCLK2_VENCP1 76 +#define CLKID_GCLK_VENCI_INT 77 +#define CLKID_GCLK_VENCP_INT 78 +#define CLKID_DAC_CLK 79 +#define CLKID_AOCLK_GATE 80 +#define CLKID_IEC958_GATE 81 +#define CLKID_ENC480P 82 +#define CLKID_RNG1 83 +#define CLKID_GCLK_VENCL_INT 84 +#define CLKID_VCLK2_VENCLMCC 85 +#define CLKID_VCLK2_VENCL 86 +#define CLKID_VCLK2_OTHER 87 +#define CLKID_EDP 88 +#define CLKID_AO_MEDIA_CPU 89 +#define CLKID_AO_AHB_SRAM 90 +#define CLKID_AO_AHB_BUS 91 +#define CLKID_AO_IFACE 92 +#define CLKID_MPLL0 93 +#define CLKID_MPLL1 94 +#define CLKID_MPLL2 95 #endif /* __MESON8B_CLKC_H */ diff --git a/include/dt-bindings/clock/rv1108-cru.h b/include/dt-bindings/clock/rv1108-cru.h index ae26f8105914..f269d833e41a 100644 --- a/include/dt-bindings/clock/rv1108-cru.h +++ b/include/dt-bindings/clock/rv1108-cru.h @@ -43,12 +43,73 @@ #define SCLK_SDMMC_SAMPLE 84 #define SCLK_SDIO_SAMPLE 85 #define SCLK_EMMC_SAMPLE 86 +#define SCLK_VENC_CORE 87 +#define SCLK_HEVC_CORE 88 +#define SCLK_HEVC_CABAC 89 +#define SCLK_PWM0_PMU 90 +#define SCLK_I2C0_PMU 91 +#define SCLK_WIFI 92 +#define SCLK_CIFOUT 93 +#define SCLK_MIPI_CSI_OUT 94 +#define SCLK_CIF0 95 +#define SCLK_CIF1 96 +#define SCLK_CIF2 97 +#define SCLK_CIF3 98 +#define SCLK_DSP 99 +#define SCLK_DSP_IOP 100 +#define SCLK_DSP_EPP 101 +#define SCLK_DSP_EDP 102 +#define SCLK_DSP_EDAP 103 +#define SCLK_CVBS_HOST 104 +#define SCLK_HDMI_SFR 105 +#define SCLK_HDMI_CEC 106 +#define SCLK_CRYPTO 107 +#define SCLK_SPI 108 +#define SCLK_SARADC 109 +#define SCLK_TSADC 110 +#define SCLK_MACPHY_PRE 111 +#define SCLK_MACPHY 112 +#define SCLK_MACPHY_RX 113 +#define SCLK_MAC_REF 114 +#define SCLK_MAC_REFOUT 115 +#define SCLK_DSP_PFM 116 +#define SCLK_RGA 117 +#define SCLK_I2C1 118 +#define SCLK_I2C2 119 +#define SCLK_I2C3 120 +#define SCLK_PWM 121 +#define SCLK_ISP 122 +#define SCLK_USBPHY 123 +#define SCLK_I2S0_SRC 124 +#define SCLK_I2S1_SRC 125 +#define SCLK_I2S2_SRC 126 +#define SCLK_UART0_SRC 127 +#define SCLK_UART1_SRC 128 +#define SCLK_UART2_SRC 129 + +#define DCLK_VOP_SRC 185 +#define DCLK_HDMIPHY 186 +#define DCLK_VOP 187 /* aclk gates */ #define ACLK_DMAC 192 #define ACLK_PRE 193 #define ACLK_CORE 194 #define ACLK_ENMCORE 195 +#define ACLK_RKVENC 196 +#define ACLK_RKVDEC 197 +#define ACLK_VPU 198 +#define ACLK_CIF0 199 +#define ACLK_VIO0 200 +#define ACLK_VIO1 201 +#define ACLK_VOP 202 +#define ACLK_IEP 203 +#define ACLK_RGA 204 +#define ACLK_ISP 205 +#define ACLK_CIF1 206 +#define ACLK_CIF2 207 +#define ACLK_CIF3 208 +#define ACLK_PERI 209 /* pclk gates */ #define PCLK_GPIO1 256 @@ -67,10 +128,23 @@ #define PCLK_PWM 269 #define PCLK_TIMER 270 #define PCLK_PERI 271 +#define PCLK_GPIO0_PMU 272 +#define PCLK_I2C0_PMU 273 +#define PCLK_PWM0_PMU 274 +#define PCLK_ISP 275 +#define PCLK_VIO 276 +#define PCLK_MIPI_DSI 277 +#define PCLK_HDMI_CTRL 278 +#define PCLK_SARADC 279 +#define PCLK_DSP_CFG 280 +#define PCLK_BUS 281 +#define PCLK_EFUSE0 282 +#define PCLK_EFUSE1 283 +#define PCLK_WDT 284 /* hclk gates */ #define HCLK_I2S0_8CH 320 -#define HCLK_I2S1_8CH 321 +#define HCLK_I2S1_2CH 321 #define HCLK_I2S2_2CH 322 #define HCLK_NANDC 323 #define HCLK_SDMMC 324 @@ -78,20 +152,37 @@ #define HCLK_EMMC 326 #define HCLK_PERI 327 #define HCLK_SFC 328 +#define HCLK_RKVENC 329 +#define HCLK_RKVDEC 330 +#define HCLK_CIF0 331 +#define HCLK_VIO 332 +#define HCLK_VOP 333 +#define HCLK_IEP 334 +#define HCLK_RGA 335 +#define HCLK_ISP 336 +#define HCLK_CRYPTO_MST 337 +#define HCLK_CRYPTO_SLV 338 +#define HCLK_HOST0 339 +#define HCLK_OTG 340 +#define HCLK_CIF1 341 +#define HCLK_CIF2 342 +#define HCLK_CIF3 343 +#define HCLK_BUS 344 +#define HCLK_VPU 345 -#define CLK_NR_CLKS (HCLK_SFC + 1) +#define CLK_NR_CLKS (HCLK_VPU + 1) /* reset id */ -#define SRST_CORE_PO_AD 0 +#define SRST_CORE_PO_AD 0 #define SRST_CORE_AD 1 #define SRST_L2_AD 2 -#define SRST_CPU_NIU_AD 3 +#define SRST_CPU_NIU_AD 3 #define SRST_CORE_PO 4 #define SRST_CORE 5 -#define SRST_L2 6 +#define SRST_L2 6 #define SRST_CORE_DBG 8 #define PRST_DBG 9 -#define RST_DAP 10 +#define RST_DAP 10 #define PRST_DBG_NIU 11 #define ARST_STRC_SYS_AD 15 @@ -158,9 +249,9 @@ #define HRST_SYSBUS 75 #define PRST_USBGRF 76 -#define ARST_PERIPH_NIU 80 -#define HRST_PERIPH_NIU 81 -#define PRST_PERIPH_NIU 82 +#define ARST_PERIPH_NIU 80 +#define HRST_PERIPH_NIU 81 +#define PRST_PERIPH_NIU 82 #define HRST_PERIPH 83 #define HRST_SDMMC 84 #define HRST_SDIO 85 @@ -178,7 +269,7 @@ #define HRST_HOST0_AUX 96 #define HRST_HOST0_ARB 97 #define SRST_HOST0_EHCIPHY 98 -#define SRST_HOST0_UTMI 99 +#define SRST_HOST0_UTMI 99 #define SRST_USBPOR 100 #define SRST_UTMI0 101 #define SRST_UTMI1 102 @@ -225,21 +316,21 @@ #define HRST_VPU_NIU 141 #define ARST_VPU 142 #define HRST_VPU 143 -#define ARST_RKVDEC_NIU 144 -#define HRST_RKVDEC_NIU 145 +#define ARST_RKVDEC_NIU 144 +#define HRST_RKVDEC_NIU 145 #define ARST_RKVDEC 146 #define HRST_RKVDEC 147 #define SRST_RKVDEC_CABAC 148 #define SRST_RKVDEC_CORE 149 -#define ARST_RKVENC_NIU 150 -#define HRST_RKVENC_NIU 151 +#define ARST_RKVENC_NIU 150 +#define HRST_RKVENC_NIU 151 #define ARST_RKVENC 152 #define HRST_RKVENC 153 #define SRST_RKVENC_CORE 154 #define SRST_DSP_CORE 156 #define SRST_DSP_SYS 157 -#define SRST_DSP_GLOBAL 158 +#define SRST_DSP_GLOBAL 158 #define SRST_DSP_OECM 159 #define PRST_DSP_IOP_NIU 160 #define ARST_DSP_EPP_NIU 161 @@ -257,7 +348,7 @@ #define SRST_PMU_I2C0 173 #define PRST_PMU_I2C0 174 #define PRST_PMU_GPIO0 175 -#define PRST_PMU_INTMEM 176 +#define PRST_PMU_INTMEM 176 #define PRST_PMU_PWM0 177 #define SRST_PMU_PWM0 178 #define PRST_PMU_GRF 179 diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h deleted file mode 100644 index 1f31f17e19eb..000000000000 --- a/include/dt-bindings/genpd/k2g.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * TI K2G SoC Device definitions - * - * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _DT_BINDINGS_GENPD_K2G_H -#define _DT_BINDINGS_GENPD_K2G_H - -/* Documented in http://processors.wiki.ti.com/index.php/TISCI */ - -#define K2G_DEV_PMMC0 0x0000 -#define K2G_DEV_MLB0 0x0001 -#define K2G_DEV_DSS0 0x0002 -#define K2G_DEV_MCBSP0 0x0003 -#define K2G_DEV_MCASP0 0x0004 -#define K2G_DEV_MCASP1 0x0005 -#define K2G_DEV_MCASP2 0x0006 -#define K2G_DEV_DCAN0 0x0008 -#define K2G_DEV_DCAN1 0x0009 -#define K2G_DEV_EMIF0 0x000a -#define K2G_DEV_MMCHS0 0x000b -#define K2G_DEV_MMCHS1 0x000c -#define K2G_DEV_GPMC0 0x000d -#define K2G_DEV_ELM0 0x000e -#define K2G_DEV_SPI0 0x0010 -#define K2G_DEV_SPI1 0x0011 -#define K2G_DEV_SPI2 0x0012 -#define K2G_DEV_SPI3 0x0013 -#define K2G_DEV_ICSS0 0x0014 -#define K2G_DEV_ICSS1 0x0015 -#define K2G_DEV_USB0 0x0016 -#define K2G_DEV_USB1 0x0017 -#define K2G_DEV_NSS0 0x0018 -#define K2G_DEV_PCIE0 0x0019 -#define K2G_DEV_GPIO0 0x001b -#define K2G_DEV_GPIO1 0x001c -#define K2G_DEV_TIMER64_0 0x001d -#define K2G_DEV_TIMER64_1 0x001e -#define K2G_DEV_TIMER64_2 0x001f -#define K2G_DEV_TIMER64_3 0x0020 -#define K2G_DEV_TIMER64_4 0x0021 -#define K2G_DEV_TIMER64_5 0x0022 -#define K2G_DEV_TIMER64_6 0x0023 -#define K2G_DEV_MSGMGR0 0x0025 -#define K2G_DEV_BOOTCFG0 0x0026 -#define K2G_DEV_ARM_BOOTROM0 0x0027 -#define K2G_DEV_DSP_BOOTROM0 0x0029 -#define K2G_DEV_DEBUGSS0 0x002b -#define K2G_DEV_UART0 0x002c -#define K2G_DEV_UART1 0x002d -#define K2G_DEV_UART2 0x002e -#define K2G_DEV_EHRPWM0 0x002f -#define K2G_DEV_EHRPWM1 0x0030 -#define K2G_DEV_EHRPWM2 0x0031 -#define K2G_DEV_EHRPWM3 0x0032 -#define K2G_DEV_EHRPWM4 0x0033 -#define K2G_DEV_EHRPWM5 0x0034 -#define K2G_DEV_EQEP0 0x0035 -#define K2G_DEV_EQEP1 0x0036 -#define K2G_DEV_EQEP2 0x0037 -#define K2G_DEV_ECAP0 0x0038 -#define K2G_DEV_ECAP1 0x0039 -#define K2G_DEV_I2C0 0x003a -#define K2G_DEV_I2C1 0x003b -#define K2G_DEV_I2C2 0x003c -#define K2G_DEV_EDMA0 0x003f -#define K2G_DEV_SEMAPHORE0 0x0040 -#define K2G_DEV_INTC0 0x0041 -#define K2G_DEV_GIC0 0x0042 -#define K2G_DEV_QSPI0 0x0043 -#define K2G_DEV_ARM_64B_COUNTER0 0x0044 -#define K2G_DEV_TETRIS0 0x0045 -#define K2G_DEV_CGEM0 0x0046 -#define K2G_DEV_MSMC0 0x0047 -#define K2G_DEV_CBASS0 0x0049 -#define K2G_DEV_BOARD0 0x004c -#define K2G_DEV_EDMA1 0x004f - -#endif diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h index 5c75e80915fc..18ec5df5a581 100644 --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h @@ -73,5 +73,8 @@ */ #define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val) +/* DRA7 IODELAY configuration parameters */ +#define A_DELAY_PS(val) ((val) & 0xffff) +#define G_DELAY_PS(val) ((val) & 0xffff) #endif diff --git a/include/dt-bindings/reset/amlogic,meson8b-clkc-reset.h b/include/dt-bindings/reset/amlogic,meson8b-clkc-reset.h new file mode 100644 index 000000000000..1f1b56e57346 --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson8b-clkc-reset.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_CLKC_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON8B_CLKC_RESET_H + +#define CLKC_RESET_L2_CACHE_SOFT_RESET 0 +#define CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET 1 +#define CLKC_RESET_SCU_SOFT_RESET 2 +#define CLKC_RESET_CPU0_SOFT_RESET 3 +#define CLKC_RESET_CPU1_SOFT_RESET 4 +#define CLKC_RESET_CPU2_SOFT_RESET 5 +#define CLKC_RESET_CPU3_SOFT_RESET 6 +#define CLKC_RESET_A5_GLOBAL_RESET 7 +#define CLKC_RESET_A5_AXI_SOFT_RESET 8 +#define CLKC_RESET_A5_ABP_SOFT_RESET 9 +#define CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET 10 +#define CLKC_RESET_VID_CLK_CNTL_SOFT_RESET 11 +#define CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST 12 +#define CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE 13 +#define CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST 14 +#define CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE 15 + +#endif /* _DT_BINDINGS_AMLOGIC_MESON8B_CLKC_RESET_H */ |