Merge tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc into next

Pull MMC update from Ulf Hansson:
 "These patches are mainly updates for the mmci driver and have been
  tested in linux-next.

  Some ARM SoC related patches are also included and those have been
  acked from the corresponding maintainers to go through my mmc tree.

  Updates for mmci driver:
   - Put the device into low power state at system suspend.
   - Convert to the common mmc DT parser.
   - Add missing DT bindings needed for ux500.

  Updates for ARM ux500|u300:
   - Convert to the common mmc DT bindings.
   - Remove redundant board file for mmci platform data"

* tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc: (22 commits)
  mmc: mmci: Enforce DMA configuration through DT
  mmc: mmci: Enforce max frequency configuration through DT
  mmc: mmci: Enforce mmc capabilities through DT
  mmc: mmci: Enforce DT for signal direction and feedback clock
  ARM: ux500: Remove redundant board file for mmci platform data
  ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
  ARM: ux500: Add the mmc capabilities flags to DT
  mmc: mmci: Enable MMC_CAP_CMD23
  mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
  ARM: u300: Convert to the common mmc DT bindings for highspeed mode
  ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
  ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
  ARM: ux500: Add mmci signal directions and feeback clock in DT for href
  mmc: mmci: Use the common mmc DT parser
  mmc: mmci: Add DT bindings for feedback clock pin
  mmc: mmci: Add DT bindings for signal direction
  mmc: mmci: Update DT documentation
  mmc: mmci: Convert to devm functions
  mmc: mmci: Convert to the mmc gpio API
  mmc: mmci: Put the device into low power state at system suspend
  ...

14 files changed, 169 insertions, 483 deletions

diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index 2b584cae352a..03796cf2d3e7 100644
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -4,12 +4,58 @@ The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
 reading and writing to MultiMedia and SD cards alike.
 
 This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmci driver.
+by mmc.txt and the properties used by the mmci driver. Using "st" as
+the prefix for a property, indicates support by the ST Micro variant.
 
 Required properties:
 - compatible             : contains "arm,pl18x", "arm,primecell".
-- arm,primecell-periphid : contains the PrimeCell Peripheral ID.
+- vmmc-supply            : phandle to the regulator device tree node, mentioned
+                           as the VCC/VDD supply in the eMMC/SD specs.
 
 Optional properties:
-- mmc-cap-mmc-highspeed  : indicates whether MMC is high speed capable
-- mmc-cap-sd-highspeed   : indicates whether SD is high speed capable
+- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
+                           the ID provided by the HW
+- vqmmc-supply           : phandle to the regulator device tree node, mentioned
+                           as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+- st,sig-dir-dat0        : bus signal direction pin used for DAT[0].
+- st,sig-dir-dat2        : bus signal direction pin used for DAT[2].
+- st,sig-dir-dat31       : bus signal direction pin used for DAT[3] and DAT[1].
+- st,sig-dir-dat74       : bus signal direction pin used for DAT[4] to DAT[7].
+- st,sig-dir-cmd         : cmd signal direction pin used for CMD.
+- st,sig-pin-fbclk       : feedback clock signal pin used.
+
+Deprecated properties:
+- mmc-cap-mmc-highspeed  : indicates whether MMC is high speed capable.
+- mmc-cap-sd-highspeed   : indicates whether SD is high speed capable.
+
+Example:
+
+sdi0_per1@80126000 {
+	compatible = "arm,pl18x", "arm,primecell";
+	reg = <0x80126000 0x1000>;
+	interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+	dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+	       <&dma 29 0 0x0>; /* Logical - MemToDev */
+	dma-names = "rx", "tx";
+
+	clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+	clock-names = "sdi", "apb_pclk";
+
+	max-frequency = <100000000>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	cd-gpios  = <&gpio2 31 0x4>; // 95
+	st,sig-dir-dat0;
+	st,sig-dir-dat2;
+	st,sig-dir-cmd;
+	st,sig-pin-fbclk;
+
+	vmmc-supply = <&ab8500_ldo_aux3_reg>;
+	vqmmc-supply = <&vmmci>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdi0_default_mode>;
+	pinctrl-1 = <&sdi0_sleep_mode>;
+};
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 229508750890..651c56d400a4 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -38,8 +38,8 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
 			cd-gpios  = <&gpio7 6 0x4>; // 230
@@ -63,7 +63,7 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 
 			status = "okay";
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 6cb9b68e2188..bf8f0eddc2c0 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -116,8 +116,15 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			full-pwr-cycle;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
@@ -132,6 +139,7 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			non-removable;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi1_default_mode>;
 			pinctrl-1 = <&sdi1_sleep_mode>;
@@ -144,7 +152,9 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
+			non-removable;
+			vmmc-supply = <&db8500_vsmps2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi2_default_mode>;
 			pinctrl-1 = <&sdi2_sleep_mode>;
@@ -157,7 +167,8 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
+			non-removable;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi4_default_mode>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 5acc0449676a..d316c955bd5f 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -840,8 +840,8 @@
 			interrupts = <22>;
 			max-frequency = <48000000>;
 			bus-width = <4>;
-			mmc-cap-mmc-highspeed;
-			mmc-cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 			cd-gpios = <&gpio3 15 0x1>;
 			cd-inverted;
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index a2f632d0be2a..474ef83229cd 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -156,7 +156,7 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
@@ -195,7 +195,7 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi4_default_mode>;
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 6fe688e9e4da..82a661677e97 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,8 +442,8 @@
 			clock-names = "apb_pclk", "mclk";
 			max-frequency = <24000000>;
 			bus-width = <4>; // SD-card slot
-			mmc-cap-mmc-highspeed;
-			mmc-cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 			cd-gpios = <&gpio 12 0x4>;
 			cd-inverted;
 			vmmc-supply = <&ab3100_ldo_g_reg>;
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 34932e0e31fa..7858d5b6f6ce 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -202,9 +202,6 @@ static struct mmci_platform_data lpc32xx_mmci_data = {
 	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
 			  MMC_VDD_32_33 | MMC_VDD_33_34,
 	.ios_handler	= mmc_handle_ios,
-	.dma_filter	= NULL,
-	/* No DMA for now since AMBA PL080 dmaengine driver only does scatter
-	 * gather, and the MMCI driver doesn't do it this way */
 };
 
 static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index de544aabf292..9741de956b3e 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,8 +5,7 @@
 obj-y				:= cpu.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500-sdi.o \
-				board-mop500-regulators.o \
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500-regulators.o \
 				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
deleted file mode 100644
index fcbf3a13a539..000000000000
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "db8500-regs.h"
-#include "board-mop500.h"
-#include "ste-dma40-db8500.h"
-
-/*
- * v2 has a new version of this block that need to be forced, the number found
- * in hardware is incorrect
- */
-#define U8500_SDI_V2_PERIPHID 0x10480180
-
-/*
- * SDI 0 (MicroSD slot)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-
-static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi0_data = {
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_UHS_SDR12 |
-				MMC_CAP_UHS_SDR25,
-	.gpio_wp	= -1,
-	.sigdir		= MCI_ST_FBCLKEN |
-				MCI_ST_CMDDIREN |
-				MCI_ST_DATA0DIREN |
-				MCI_ST_DATA2DIREN,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi0_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi0_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI1 (SDIO WLAN)
- */
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-
-static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi1_data = {
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_NONREMOVABLE,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &sdi1_dma_cfg_rx,
-	.dma_tx_param	= &sdi1_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 2 (POP eMMC, not on DB8500ed)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type =  DB8500_DMA_DEV28_SD_MM2,
-};
-
-static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi2_data = {
-	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_NONREMOVABLE |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_CMD23,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi2_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi2_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 4 (on-board eMMC)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type =  DB8500_DMA_DEV42_SD_MM4,
-};
-
-static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi4_data = {
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_NONREMOVABLE |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_CMD23,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi4_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
-#endif
-};
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 32cc0d8d8a0e..7c7b0adca582 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -8,12 +8,7 @@
 #define __BOARD_MOP500_H
 
 #include <linux/platform_data/asoc-ux500-msp.h>
-#include <linux/amba/mmci.h>
 
-extern struct mmci_platform_data mop500_sdi0_data;
-extern struct mmci_platform_data mop500_sdi1_data;
-extern struct mmci_platform_data mop500_sdi2_data;
-extern struct mmci_platform_data mop500_sdi4_data;
 extern struct msp_i2s_platform_data msp0_platform_data;
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 8820f602fcd2..fa308f07fae5 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -146,10 +146,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
 		       "ux500-msp-i2s.0", &msp0_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 771c60ab4a32..a084edd37af5 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/device.h>
+#include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -23,6 +24,7 @@
 #include <linux/mmc/pm.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
@@ -364,7 +366,6 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
 #ifdef CONFIG_DMA_ENGINE
 static void mmci_dma_setup(struct mmci_host *host)
 {
-	struct mmci_platform_data *plat = host->plat;
 	const char *rxname, *txname;
 	dma_cap_mask_t mask;
 
@@ -378,25 +379,6 @@ static void mmci_dma_setup(struct mmci_host *host)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	if (plat && plat->dma_filter) {
-		if (!host->dma_rx_channel && plat->dma_rx_param) {
-			host->dma_rx_channel = dma_request_channel(mask,
-							   plat->dma_filter,
-							   plat->dma_rx_param);
-			/* E.g if no DMA hardware is present */
-			if (!host->dma_rx_channel)
-				dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
-		}
-
-		if (!host->dma_tx_channel && plat->dma_tx_param) {
-			host->dma_tx_channel = dma_request_channel(mask,
-							   plat->dma_filter,
-							   plat->dma_tx_param);
-			if (!host->dma_tx_channel)
-				dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
-		}
-	}
-
 	/*
 	 * If only an RX channel is specified, the driver will
 	 * attempt to use it bidirectionally, however if it is
@@ -444,11 +426,9 @@ static void mmci_dma_setup(struct mmci_host *host)
  */
 static inline void mmci_dma_release(struct mmci_host *host)
 {
-	struct mmci_platform_data *plat = host->plat;
-
 	if (host->dma_rx_channel)
 		dma_release_channel(host->dma_rx_channel);
-	if (host->dma_tx_channel && plat->dma_tx_param)
+	if (host->dma_tx_channel)
 		dma_release_channel(host->dma_tx_channel);
 	host->dma_rx_channel = host->dma_tx_channel = NULL;
 }
@@ -1285,7 +1265,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		 * indicating signal direction for the signals in
 		 * the SD/MMC bus and feedback-clock usage.
 		 */
-		pwr |= host->plat->sigdir;
+		pwr |= host->pwr_reg_add;
 
 		if (ios->bus_width == MMC_BUS_WIDTH_4)
 			pwr &= ~MCI_ST_DATA74DIREN;
@@ -1326,35 +1306,18 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	pm_runtime_put_autosuspend(mmc_dev(mmc));
 }
 
-static int mmci_get_ro(struct mmc_host *mmc)
-{
-	struct mmci_host *host = mmc_priv(mmc);
-
-	if (host->gpio_wp == -ENOSYS)
-		return -ENOSYS;
-
-	return gpio_get_value_cansleep(host->gpio_wp);
-}
-
 static int mmci_get_cd(struct mmc_host *mmc)
 {
 	struct mmci_host *host = mmc_priv(mmc);
 	struct mmci_platform_data *plat = host->plat;
-	unsigned int status;
+	unsigned int status = mmc_gpio_get_cd(mmc);
 
-	if (host->gpio_cd == -ENOSYS) {
+	if (status == -ENOSYS) {
 		if (!plat->status)
 			return 1; /* Assume always present */
 
 		status = plat->status(mmc_dev(host->mmc));
-	} else
-		status = !!gpio_get_value_cansleep(host->gpio_cd)
-			^ plat->cd_invert;
-
-	/*
-	 * Use positive logic throughout - status is zero for no card,
-	 * non-zero for card inserted.
-	 */
+	}
 	return status;
 }
 
@@ -1391,70 +1354,44 @@ static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 	return ret;
 }
 
-static irqreturn_t mmci_cd_irq(int irq, void *dev_id)
-{
-	struct mmci_host *host = dev_id;
-
-	mmc_detect_change(host->mmc, msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
 static struct mmc_host_ops mmci_ops = {
 	.request	= mmci_request,
 	.pre_req	= mmci_pre_request,
 	.post_req	= mmci_post_request,
 	.set_ios	= mmci_set_ios,
-	.get_ro		= mmci_get_ro,
+	.get_ro		= mmc_gpio_get_ro,
 	.get_cd		= mmci_get_cd,
 	.start_signal_voltage_switch = mmci_sig_volt_switch,
 };
 
-#ifdef CONFIG_OF
-static void mmci_dt_populate_generic_pdata(struct device_node *np,
-					struct mmci_platform_data *pdata)
+static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc)
 {
-	int bus_width = 0;
-
-	pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
-	pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
+	struct mmci_host *host = mmc_priv(mmc);
+	int ret = mmc_of_parse(mmc);
 
-	if (of_get_property(np, "cd-inverted", NULL))
-		pdata->cd_invert = true;
-	else
-		pdata->cd_invert = false;
+	if (ret)
+		return ret;
 
-	of_property_read_u32(np, "max-frequency", &pdata->f_max);
-	if (!pdata->f_max)
-		pr_warn("%s has no 'max-frequency' property\n", np->full_name);
+	if (of_get_property(np, "st,sig-dir-dat0", NULL))
+		host->pwr_reg_add |= MCI_ST_DATA0DIREN;
+	if (of_get_property(np, "st,sig-dir-dat2", NULL))
+		host->pwr_reg_add |= MCI_ST_DATA2DIREN;
+	if (of_get_property(np, "st,sig-dir-dat31", NULL))
+		host->pwr_reg_add |= MCI_ST_DATA31DIREN;
+	if (of_get_property(np, "st,sig-dir-dat74", NULL))
+		host->pwr_reg_add |= MCI_ST_DATA74DIREN;
+	if (of_get_property(np, "st,sig-dir-cmd", NULL))
+		host->pwr_reg_add |= MCI_ST_CMDDIREN;
+	if (of_get_property(np, "st,sig-pin-fbclk", NULL))
+		host->pwr_reg_add |= MCI_ST_FBCLKEN;
 
 	if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL))
-		pdata->capabilities |= MMC_CAP_MMC_HIGHSPEED;
+		mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
 	if (of_get_property(np, "mmc-cap-sd-highspeed", NULL))
-		pdata->capabilities |= MMC_CAP_SD_HIGHSPEED;
+		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
 
-	of_property_read_u32(np, "bus-width", &bus_width);
-	switch (bus_width) {
-	case 0 :
-		/* No bus-width supplied. */
-		break;
-	case 4 :
-		pdata->capabilities |= MMC_CAP_4_BIT_DATA;
-		break;
-	case 8 :
-		pdata->capabilities |= MMC_CAP_8_BIT_DATA;
-		break;
-	default :
-		pr_warn("%s: Unsupported bus width\n", np->full_name);
-	}
-}
-#else
-static void mmci_dt_populate_generic_pdata(struct device_node *np,
-					struct mmci_platform_data *pdata)
-{
-	return;
+	return 0;
 }
-#endif
 
 static int mmci_probe(struct amba_device *dev,
 	const struct amba_id *id)
@@ -1478,26 +1415,17 @@ static int mmci_probe(struct amba_device *dev,
 			return -ENOMEM;
 	}
 
-	if (np)
-		mmci_dt_populate_generic_pdata(np, plat);
+	mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);
+	if (!mmc)
+		return -ENOMEM;
 
-	ret = amba_request_regions(dev, DRIVER_NAME);
+	ret = mmci_of_parse(np, mmc);
 	if (ret)
-		goto out;
-
-	mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto rel_regions;
-	}
+		goto host_free;
 
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 
-	host->gpio_wp = -ENOSYS;
-	host->gpio_cd = -ENOSYS;
-	host->gpio_cd_irq = -1;
-
 	host->hw_designer = amba_manf(dev);
 	host->hw_revision = amba_rev(dev);
 	dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
@@ -1529,10 +1457,11 @@ static int mmci_probe(struct amba_device *dev,
 		dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
 			host->mclk);
 	}
+
 	host->phybase = dev->res.start;
-	host->base = ioremap(dev->res.start, resource_size(&dev->res));
-	if (!host->base) {
-		ret = -ENOMEM;
+	host->base = devm_ioremap_resource(&dev->dev, &dev->res);
+	if (IS_ERR(host->base)) {
+		ret = PTR_ERR(host->base);
 		goto clk_disable;
 	}
 
@@ -1546,15 +1475,13 @@ static int mmci_probe(struct amba_device *dev,
 	else
 		mmc->f_min = DIV_ROUND_UP(host->mclk, 512);
 	/*
-	 * If the platform data supplies a maximum operating
-	 * frequency, this takes precedence. Else, we fall back
-	 * to using the module parameter, which has a (low)
-	 * default value in case it is not specified. Either
-	 * value must not exceed the clock rate into the block,
-	 * of course.
+	 * If no maximum operating frequency is supplied, fall back to use
+	 * the module parameter, which has a (low) default value in case it
+	 * is not specified. Either value must not exceed the clock rate into
+	 * the block, of course.
 	 */
-	if (plat->f_max)
-		mmc->f_max = min(host->mclk, plat->f_max);
+	if (mmc->f_max)
+		mmc->f_max = min(host->mclk, mmc->f_max);
 	else
 		mmc->f_max = min(host->mclk, fmax);
 	dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
@@ -1566,8 +1493,15 @@ static int mmci_probe(struct amba_device *dev,
 	else if (plat->ocr_mask)
 		dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
 
-	mmc->caps = plat->capabilities;
-	mmc->caps2 = plat->capabilities2;
+	/* DT takes precedence over platform data. */
+	if (!np) {
+		if (!plat->cd_invert)
+			mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+		mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+	}
+
+	/* We support these capabilities. */
+	mmc->caps |= MMC_CAP_CMD23;
 
 	if (variant->busy_detect) {
 		mmci_ops.card_busy = mmci_card_busy;
@@ -1579,7 +1513,7 @@ static int mmci_probe(struct amba_device *dev,
 	mmc->ops = &mmci_ops;
 
 	/* We support these PM capabilities. */
-	mmc->pm_caps = MMC_PM_KEEP_POWER;
+	mmc->pm_caps |= MMC_PM_KEEP_POWER;
 
 	/*
 	 * We can do SGIO
@@ -1616,62 +1550,30 @@ static int mmci_probe(struct amba_device *dev,
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
-	if (plat->gpio_cd == -EPROBE_DEFER) {
-		ret = -EPROBE_DEFER;
-		goto err_gpio_cd;
-	}
-	if (gpio_is_valid(plat->gpio_cd)) {
-		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
-		if (ret == 0)
-			ret = gpio_direction_input(plat->gpio_cd);
-		if (ret == 0)
-			host->gpio_cd = plat->gpio_cd;
-		else if (ret != -ENOSYS)
-			goto err_gpio_cd;
-
-		/*
-		 * A gpio pin that will detect cards when inserted and removed
-		 * will most likely want to trigger on the edges if it is
-		 * 0 when ejected and 1 when inserted (or mutatis mutandis
-		 * for the inverted case) so we request triggers on both
-		 * edges.
-		 */
-		ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),
-				mmci_cd_irq,
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				DRIVER_NAME " (cd)", host);
-		if (ret >= 0)
-			host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
-	}
-	if (plat->gpio_wp == -EPROBE_DEFER) {
-		ret = -EPROBE_DEFER;
-		goto err_gpio_wp;
+	/* If DT, cd/wp gpios must be supplied through it. */
+	if (!np && gpio_is_valid(plat->gpio_cd)) {
+		ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0);
+		if (ret)
+			goto clk_disable;
 	}
-	if (gpio_is_valid(plat->gpio_wp)) {
-		ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
-		if (ret == 0)
-			ret = gpio_direction_input(plat->gpio_wp);
-		if (ret == 0)
-			host->gpio_wp = plat->gpio_wp;
-		else if (ret != -ENOSYS)
-			goto err_gpio_wp;
+	if (!np && gpio_is_valid(plat->gpio_wp)) {
+		ret = mmc_gpio_request_ro(mmc, plat->gpio_wp);
+		if (ret)
+			goto clk_disable;
 	}
 
-	if ((host->plat->status || host->gpio_cd != -ENOSYS)
-	    && host->gpio_cd_irq < 0)
-		mmc->caps |= MMC_CAP_NEEDS_POLL;
-
-	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
+	ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED,
+			DRIVER_NAME " (cmd)", host);
 	if (ret)
-		goto unmap;
+		goto clk_disable;
 
 	if (!dev->irq[1])
 		host->singleirq = true;
 	else {
-		ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
-				  DRIVER_NAME " (pio)", host);
+		ret = devm_request_irq(&dev->dev, dev->irq[1], mmci_pio_irq,
+				IRQF_SHARED, DRIVER_NAME " (pio)", host);
 		if (ret)
-			goto irq0_free;
+			goto clk_disable;
 	}
 
 	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
@@ -1693,25 +1595,10 @@ static int mmci_probe(struct amba_device *dev,
 
 	return 0;
 
- irq0_free:
-	free_irq(dev->irq[0], host);
- unmap:
-	if (host->gpio_wp != -ENOSYS)
-		gpio_free(host->gpio_wp);
- err_gpio_wp:
-	if (host->gpio_cd_irq >= 0)
-		free_irq(host->gpio_cd_irq, host);
-	if (host->gpio_cd != -ENOSYS)
-		gpio_free(host->gpio_cd);
- err_gpio_cd:
-	iounmap(host->base);
  clk_disable:
 	clk_disable_unprepare(host->clk);
  host_free:
 	mmc_free_host(mmc);
- rel_regions:
-	amba_release_regions(dev);
- out:
 	return ret;
 }
 
@@ -1737,92 +1624,46 @@ static int mmci_remove(struct amba_device *dev)
 		writel(0, host->base + MMCIDATACTRL);
 
 		mmci_dma_release(host);
-		free_irq(dev->irq[0], host);
-		if (!host->singleirq)
-			free_irq(dev->irq[1], host);
-
-		if (host->gpio_wp != -ENOSYS)
-			gpio_free(host->gpio_wp);
-		if (host->gpio_cd_irq >= 0)
-			free_irq(host->gpio_cd_irq, host);
-		if (host->gpio_cd != -ENOSYS)
-			gpio_free(host->gpio_cd);
-
-		iounmap(host->base);
 		clk_disable_unprepare(host->clk);
-
 		mmc_free_host(mmc);
-
-		amba_release_regions(dev);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_SUSPEND
-static int mmci_suspend(struct device *dev)
-{
-	struct amba_device *adev = to_amba_device(dev);
-	struct mmc_host *mmc = amba_get_drvdata(adev);
-
-	if (mmc) {
-		struct mmci_host *host = mmc_priv(mmc);
-		pm_runtime_get_sync(dev);
-		writel(0, host->base + MMCIMASK0);
 	}
 
 	return 0;
 }
 
-static int mmci_resume(struct device *dev)
-{
-	struct amba_device *adev = to_amba_device(dev);
-	struct mmc_host *mmc = amba_get_drvdata(adev);
-
-	if (mmc) {
-		struct mmci_host *host = mmc_priv(mmc);
-		writel(MCI_IRQENABLE, host->base + MMCIMASK0);
-		pm_runtime_put(dev);
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 static void mmci_save(struct mmci_host *host)
 {
 	unsigned long flags;
 
-	if (host->variant->pwrreg_nopower) {
-		spin_lock_irqsave(&host->lock, flags);
+	spin_lock_irqsave(&host->lock, flags);
 
-		writel(0, host->base + MMCIMASK0);
+	writel(0, host->base + MMCIMASK0);
+	if (host->variant->pwrreg_nopower) {
 		writel(0, host->base + MMCIDATACTRL);
 		writel(0, host->base + MMCIPOWER);
 		writel(0, host->base + MMCICLOCK);
-		mmci_reg_delay(host);
-
-		spin_unlock_irqrestore(&host->lock, flags);
 	}
+	mmci_reg_delay(host);
 
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static void mmci_restore(struct mmci_host *host)
 {
 	unsigned long flags;
 
-	if (host->variant->pwrreg_nopower) {
-		spin_lock_irqsave(&host->lock, flags);
+	spin_lock_irqsave(&host->lock, flags);
 
+	if (host->variant->pwrreg_nopower) {
 		writel(host->clk_reg, host->base + MMCICLOCK);
 		writel(host->datactrl_reg, host->base + MMCIDATACTRL);
 		writel(host->pwr_reg, host->base + MMCIPOWER);
-		writel(MCI_IRQENABLE, host->base + MMCIMASK0);
-		mmci_reg_delay(host);
-
-		spin_unlock_irqrestore(&host->lock, flags);
 	}
+	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	mmci_reg_delay(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static int mmci_runtime_suspend(struct device *dev)
@@ -1857,8 +1698,9 @@ static int mmci_runtime_resume(struct device *dev)
 #endif
 
 static const struct dev_pm_ops mmci_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(mmci_suspend, mmci_resume)
-	SET_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_PM_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
 };
 
 static struct amba_id mmci_ids[] = {
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 58b1b8896bf2..347d942d740b 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -13,6 +13,16 @@
 #define MCI_PWR_ON		0x03
 #define MCI_OD			(1 << 6)
 #define MCI_ROD			(1 << 7)
+/*
+ * The ST Micro version does not have ROD and reuse the voltage registers for
+ * direction settings.
+ */
+#define MCI_ST_DATA2DIREN	(1 << 2)
+#define MCI_ST_CMDDIREN		(1 << 3)
+#define MCI_ST_DATA0DIREN	(1 << 4)
+#define MCI_ST_DATA31DIREN	(1 << 5)
+#define MCI_ST_FBCLKEN		(1 << 7)
+#define MCI_ST_DATA74DIREN	(1 << 8)
 
 #define MMCICLOCK		0x004
 #define MCI_CLK_ENABLE		(1 << 8)
@@ -176,9 +186,6 @@ struct mmci_host {
 	struct mmc_data		*data;
 	struct mmc_host		*mmc;
 	struct clk		*clk;
-	int			gpio_cd;
-	int			gpio_wp;
-	int			gpio_cd_irq;
 	bool			singleirq;
 
 	spinlock_t		lock;
@@ -186,6 +193,7 @@ struct mmci_host {
 	unsigned int		mclk;
 	unsigned int		cclk;
 	u32			pwr_reg;
+	u32			pwr_reg_add;
 	u32			clk_reg;
 	u32			datactrl_reg;
 	u32			busy_status;
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 32a89cf5ec45..8c98113069ce 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,28 +6,9 @@
 
 #include <linux/mmc/host.h>
 
-
-/*
- * These defines is places here due to access is needed from machine
- * configuration files. The ST Micro version does not have ROD and
- * reuse the voltage registers for direction settings.
- */
-#define MCI_ST_DATA2DIREN	(1 << 2)
-#define MCI_ST_CMDDIREN		(1 << 3)
-#define MCI_ST_DATA0DIREN	(1 << 4)
-#define MCI_ST_DATA31DIREN	(1 << 5)
-#define MCI_ST_FBCLKEN		(1 << 7)
-#define MCI_ST_DATA74DIREN	(1 << 8)
-
-/* Just some dummy forwarding */
-struct dma_chan;
-
 /**
  * struct mmci_platform_data - platform configuration for the MMCI
  * (also known as PL180) block.
- * @f_max: the maximum operational frequency for this host in this
- * platform configuration. When this is specified it takes precedence
- * over the module parameter for the same frequency.
  * @ocr_mask: available voltages on the 4 pins from the block, this
  * is ignored if a regulator is used, see the MMC_VDD_* masks in
  * mmc/host.h
@@ -42,37 +23,14 @@ struct dma_chan;
  * @gpio_wp: read this GPIO pin to see if the card is write protected
  * @gpio_cd: read this GPIO pin to detect card insertion
  * @cd_invert: true if the gpio_cd pin value is active low
- * @capabilities: the capabilities of the block as implemented in
- * this platform, signify anything MMC_CAP_* from mmc/host.h
- * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h
- * @sigdir: a bit field indicating for what bits in the MMC bus the host
- * should enable signal direction indication.
- * @dma_filter: function used to select an appropriate RX and TX
- * DMA channel to be used for DMA, if and only if you're deploying the
- * generic DMA engine
- * @dma_rx_param: parameter passed to the DMA allocation
- * filter in order to select an appropriate RX channel. If
- * there is a bidirectional RX+TX channel, then just specify
- * this and leave dma_tx_param set to NULL
- * @dma_tx_param: parameter passed to the DMA allocation
- * filter in order to select an appropriate TX channel. If this
- * is NULL the driver will attempt to use the RX channel as a
- * bidirectional channel
  */
 struct mmci_platform_data {
-	unsigned int f_max;
 	unsigned int ocr_mask;
 	int (*ios_handler)(struct device *, struct mmc_ios *);
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
 	bool	cd_invert;
-	unsigned long capabilities;
-	unsigned long capabilities2;
-	u32 sigdir;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-	void *dma_rx_param;
-	void *dma_tx_param;
 };
 
 #endif