ARM: OMAP2: Clock: Add OMAP3 DPLL autoidle functions

This patch adds support for DPLL autoidle control to the OMAP3 clock
framework.  These functions will be used by the noncore DPLL enable
and disable code - this is because, according to the CDP code, the
DPLL autoidle status must be saved and restored across DPLL
lock/bypass/off transitions.

N.B.: the CORE DPLL (DPLL3) has three autoidle mode options, rather
than just two.  This code currently does not support the third option,
low-power bypass autoidle.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

5 files changed, 376 insertions, 30 deletions

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index b42bdd6079a5..4263099b1ad3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -1,10 +1,11 @@
 /*
  * OMAP3-specific clock framework functions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
  *
  * Parts of this code are based on code written by
  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@@ -23,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/limits.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -37,8 +39,11 @@
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-/* CM_CLKEN_PLL*.EN* bit values */
-#define DPLL_LOCKED		0x7
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
 
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
@@ -53,6 +58,290 @@ static void omap3_dpll_recalc(struct clk *clk)
 	propagate_rate(clk);
 }
 
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+
+	cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
+			dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+	u32 idlest_mask;
+
+	dd = clk->dpll_data;
+
+	state <<= dd->idlest_bit;
+	idlest_mask = 1 << dd->idlest_bit;
+
+	while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+	       i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+		       clk->name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk->name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+	u8 ai;
+	int r;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	pr_debug("clock: locking DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	if (ai) {
+		/*
+		 * If no downstream clocks are enabled, CM_IDLEST bit
+		 * may never become active, so don't wait for DPLL to lock.
+		 */
+		r = 0;
+		omap3_dpll_allow_idle(clk);
+	} else {
+		r = _omap3_wait_dpll_status(clk, 1);
+		omap3_dpll_deny_idle(clk);
+	};
+
+	return r;
+}
+
+/*
+ * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+	int r;
+	u8 ai;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+	u8 ai;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static int omap3_noncore_dpll_enable(struct clk *clk)
+{
+	int r;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (clk->parent->rate == clk_get_rate(clk))
+		r = _omap3_noncore_dpll_bypass(clk);
+	else
+		r = _omap3_noncore_dpll_lock(clk);
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static void omap3_noncore_dpll_disable(struct clk *clk)
+{
+	if (clk == &dpll3_ck)
+		return;
+
+	_omap3_noncore_dpll_stop(clk);
+}
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	v = cm_read_reg(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	cm_rmw_reg_bits(dd->autoidle_mask,
+			DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
+			dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	cm_rmw_reg_bits(dd->autoidle_mask,
+			DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
+			dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
  * @clk: DPLL output struct clk
@@ -89,6 +378,8 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
 		propagate_rate(clk);
 }
 
+/* Common clock code */
+
 /*
  * As it is structured now, this will prevent an OMAP2/3 multiboot
  * kernel from compiling.  This will need further attention.
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 73624dc04c97..e349d48ee807 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,14 +1,19 @@
 /*
  * OMAP3 clock framework
  *
- * Virtual clocks are introduced as a convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
@@ -24,6 +29,11 @@
 
 static void omap3_dpll_recalc(struct clk *clk);
 static void omap3_clkoutx2_recalc(struct clk *clk);
+static void omap3_dpll_allow_idle(struct clk *clk);
+static void omap3_dpll_deny_idle(struct clk *clk);
+static u32 omap3_dpll_autoidle_read(struct clk *clk);
+static int omap3_noncore_dpll_enable(struct clk *clk);
+static void omap3_noncore_dpll_disable(struct clk *clk);
 
 /*
  * DPLL1 supplies clock to the MPU.
@@ -33,6 +43,11 @@ static void omap3_clkoutx2_recalc(struct clk *clk);
  * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
  */
 
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP		0x1
+#define DPLL_LOW_POWER_BYPASS		0x5
+#define DPLL_LOCKED			0x7
+
 /* PRM CLOCKS */
 
 /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
@@ -246,9 +261,14 @@ static const struct dpll_data dpll1_dd = {
 	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_bit	= OMAP3430_ST_MPU_CLK_SHIFT,
 };
 
 static struct clk dpll1_ck = {
@@ -303,16 +323,24 @@ static const struct dpll_data dpll2_dd = {
 	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+				(1 << DPLL_LOW_POWER_BYPASS),
 	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_bit	= OMAP3430_ST_IVA2_CLK_SHIFT
 };
 
 static struct clk dpll2_ck = {
 	.name		= "dpll2_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll2_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -338,9 +366,11 @@ static struct clk dpll2_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* DPLL3 */
-/* Source clock for all interfaces and for some device fclks */
-/* Type: DPLL */
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
 static const struct dpll_data dpll3_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
@@ -350,6 +380,8 @@ static const struct dpll_data dpll3_dd = {
 	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
 };
 
 static struct clk dpll3_ck = {
@@ -439,7 +471,7 @@ static struct clk core_ck = {
 	.name		= "core_ck",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= core_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -456,7 +488,7 @@ static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= dpll3_m2x2_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -503,7 +535,7 @@ static struct clk emu_core_alwon_ck = {
 	.parent		= &dpll3_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= emu_core_alwon_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -519,16 +551,23 @@ static const struct dpll_data dpll4_dd = {
 	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_bit	= OMAP3430_ST_PERIPH_CLK_SHIFT,
 };
 
 static struct clk dpll4_ck = {
 	.name		= "dpll4_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll4_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -584,7 +623,7 @@ static struct clk omap_96m_alwon_fck = {
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= omap_96m_alwon_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				 PARENT_CONTROLS_CLOCK,
@@ -610,7 +649,7 @@ static struct clk cm_96m_fck = {
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cm_96m_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -652,7 +691,7 @@ static struct clk virt_omap_54m_fck = {
 	.parent		= &dpll4_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= virt_omap_54m_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -810,17 +849,23 @@ static const struct dpll_data dpll5_dd = {
 	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
 	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.idlest_bit	= OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
 };
 
 static struct clk dpll5_ck = {
 	.name		= "dpll5_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll5_dd,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -1939,7 +1984,7 @@ static struct clk dss1_alwon_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= dss1_alwon_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_clksel_recalc,
@@ -1995,7 +2040,7 @@ static struct clk cam_mclk = {
 	.parent		= &dpll4_m5x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cam_mclk_clksel,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 3c38395f6442..ee4c0ca1a708 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -72,7 +72,8 @@
 #define OMAP3430_ST_IVA2				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK				(1 << 0)
+#define OMAP3430_ST_IVA2_CLK_SHIFT			0
+#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
 
 /* CM_AUTOIDLE_PLL_IVA2 */
 #define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
@@ -115,10 +116,7 @@
 #define OMAP3430_ST_MPU					(1 << 0)
 
 /* CM_IDLEST_PLL_MPU */
-#define OMAP3430_ST_MPU_CLK				(1 << 0)
-#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_SHIFT			0
 #define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
 
 /* CM_AUTOIDLE_PLL_MPU */
@@ -408,8 +406,10 @@
 #define OMAP3430_ST_12M_CLK				(1 << 4)
 #define OMAP3430_ST_48M_CLK				(1 << 3)
 #define OMAP3430_ST_96M_CLK				(1 << 2)
-#define OMAP3430_ST_PERIPH_CLK				(1 << 1)
-#define OMAP3430_ST_CORE_CLK				(1 << 0)
+#define OMAP3430_ST_PERIPH_CLK_SHIFT			1
+#define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
+#define OMAP3430_ST_CORE_CLK_SHIFT			0
+#define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
 
 /* CM_IDLEST2_CKGEN */
 #define OMAP3430ES2_ST_120M_CLK_SHIFT			1
@@ -423,6 +423,10 @@
 #define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
 #define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
 
+/* CM_AUTOIDLE2_PLL */
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT		0
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK		(0x7 << 0)
+
 /* CM_CLKSEL1_PLL */
 /* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 1dd873fcc2bd..87a44c715aa4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -81,6 +81,7 @@
 #define OMAP3430ES2_CM_FCLKEN3				0x0008
 #define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
 #define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
 #define OMAP3430_CM_CLKSEL1				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 8490fbba39d1..22daa5d64d35 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -34,11 +34,16 @@ struct dpll_data {
 	u32			mult_mask;
 	u32			div1_mask;
 #  if defined(CONFIG_ARCH_OMAP3)
+	u8			modes;
 	void __iomem		*control_reg;
 	u32			enable_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
+	void __iomem		*autoidle_reg;
+	u32			autoidle_mask;
+	void __iomem		*idlest_reg;
+	u8			idlest_bit;
 #  endif
 };