Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull mips fixes from Ralf Baechle:
 "The hopefully final round of fixes for 3.18:

   - Fix a number of build errors affecting particular configurations.
   - Handle EVA correctly when flushing a signal trampoline and dcache
     lines.
   - Fix printks printing jibberish.
   - Handle 64 bit memory addresses correctly when adding memory chunk
     on 32 bit kernels.
   - Fix a race condition in the hardware tablewalker code"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers
  MIPS: Fix address type used for early memory detection.
  MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected.
  MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASE
  MIPS: Netlogic: handle modular AHCI builds
  MIPS: Netlogic: handle modular USB case
  MIPS: Loongson: Make platform serial setup always built-in.
  MIPS: fix EVA & non-SMP non-FPU FP context signal handling
  MIPS: cpu-probe: Set the FTLB probability bit on supported cores
  MIPS: BMIPS: Fix ".previous without corresponding .section" warnings
  MIPS: uaccess.h: Fix strnlen_user comment.
  MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line
  MIPS: Fix info about plat_setup in arch_mem_init comment
  MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.c
  MIPS: SEAD3: Fix LED device registration.
  MIPS: Fix a copy & paste error in unistd.h

15 files changed, 84 insertions, 31 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f43aa536c517..9536ef912f59 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2101,9 +2101,17 @@ config 64BIT_PHYS_ADDR
 config ARCH_PHYS_ADDR_T_64BIT
        def_bool 64BIT_PHYS_ADDR
 
+choice
+	prompt "SmartMIPS or microMIPS ASE support"
+
+config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
+	bool "None"
+	help
+	  Select this if you want neither microMIPS nor SmartMIPS support
+
 config CPU_HAS_SMARTMIPS
 	depends on SYS_SUPPORTS_SMARTMIPS
-	bool "Support for the SmartMIPS ASE"
+	bool "SmartMIPS"
 	help
 	  SmartMIPS is a extension of the MIPS32 architecture aimed at
 	  increased security at both hardware and software level for
@@ -2115,11 +2123,13 @@ config CPU_HAS_SMARTMIPS
 
 config CPU_MICROMIPS
 	depends on SYS_SUPPORTS_MICROMIPS
-	bool "Build kernel using microMIPS ISA"
+	bool "microMIPS"
 	help
 	  When this option is enabled the kernel will be built using the
 	  microMIPS ISA
 
+endchoice
+
 config CPU_HAS_MSA
 	bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)"
 	depends on CPU_SUPPORTS_MSA
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index b46cd220a018..22a135ac91de 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -661,6 +661,8 @@
 #define MIPS_CONF6_SYND		(_ULCAST_(1) << 13)
 /* proAptiv FTLB on/off bit */
 #define MIPS_CONF6_FTLBEN	(_ULCAST_(1) << 15)
+/* FTLB probability bits */
+#define MIPS_CONF6_FTLBP_SHIFT	(16)
 
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
 
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index 4520adc8699b..cd6e0afc6833 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -257,7 +257,11 @@ static inline void protected_flush_icache_line(unsigned long addr)
  */
 static inline void protected_writeback_dcache_line(unsigned long addr)
 {
+#ifdef CONFIG_EVA
+	protected_cachee_op(Hit_Writeback_Inv_D, addr);
+#else
 	protected_cache_op(Hit_Writeback_Inv_D, addr);
+#endif
 }
 
 static inline void protected_writeback_scache_line(unsigned long addr)
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 133678ab4eb8..22a5624e2fd2 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -1422,7 +1422,7 @@ static inline long __strnlen_user(const char __user *s, long n)
 }
 
 /*
- * strlen_user: - Get the size of a string in user space.
+ * strnlen_user: - Get the size of a string in user space.
  * @str: The string to measure.
  *
  * Context: User context only.	This function may sleep.
@@ -1431,9 +1431,7 @@ static inline long __strnlen_user(const char __user *s, long n)
  *
  * Returns the size of the string INCLUDING the terminating NUL.
  * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
+ * If the string is too long, returns a value greater than @n.
  */
 static inline long strnlen_user(const char __user *s, long n)
 {
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 9dc58568f230..d001bb1ad177 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -1045,7 +1045,7 @@
 #define __NR_seccomp			(__NR_Linux + 316)
 #define __NR_getrandom			(__NR_Linux + 317)
 #define __NR_memfd_create		(__NR_Linux + 318)
-#define __NR_memfd_create		(__NR_Linux + 319)
+#define __NR_bpf			(__NR_Linux + 319)
 
 /*
  * Offset of the last N32 flavoured syscall
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S
index 290c23b51678..86495072a922 100644
--- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S
@@ -208,7 +208,6 @@ bmips_reset_nmi_vec_end:
 END(bmips_reset_nmi_vec)
 
 	.set	pop
-	.previous
 
 /***********************************************************************
  * CPU1 warm restart vector (used for second and subsequent boots).
@@ -281,5 +280,3 @@ LEAF(bmips_enable_xks01)
 	jr	ra
 
 END(bmips_enable_xks01)
-
-	.previous
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index e6e97d2a5c9e..0384b05ab5a0 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -229,6 +229,7 @@ LEAF(mips_cps_core_init)
 	 nop
 
 	.set	push
+	.set	mips32r2
 	.set	mt
 
 	/* Only allow 1 TC per VPE to execute... */
@@ -345,6 +346,7 @@ LEAF(mips_cps_boot_vpes)
 	 nop
 
 	.set	push
+	.set	mips32r2
 	.set	mt
 
 1:	/* Enter VPE configuration state */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index d5a4f380b019..dc49cf30c2db 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -193,6 +193,32 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
 static char unknown_isa[] = KERN_ERR \
 	"Unsupported ISA type, c0.config0: %d.";
 
+static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
+{
+
+	unsigned int probability = c->tlbsize / c->tlbsizevtlb;
+
+	/*
+	 * 0 = All TLBWR instructions go to FTLB
+	 * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
+	 * FTLB and 1 goes to the VTLB.
+	 * 2 = 7:1: As above with 7:1 ratio.
+	 * 3 = 3:1: As above with 3:1 ratio.
+	 *
+	 * Use the linear midpoint as the probability threshold.
+	 */
+	if (probability >= 12)
+		return 1;
+	else if (probability >= 6)
+		return 2;
+	else
+		/*
+		 * So FTLB is less than 4 times bigger than VTLB.
+		 * A 3:1 ratio can still be useful though.
+		 */
+		return 3;
+}
+
 static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 {
 	unsigned int config6;
@@ -203,9 +229,14 @@ static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 	case CPU_P5600:
 		/* proAptiv & related cores use Config6 to enable the FTLB */
 		config6 = read_c0_config6();
+		/* Clear the old probability value */
+		config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
 		if (enable)
 			/* Enable FTLB */
-			write_c0_config6(config6 | MIPS_CONF6_FTLBEN);
+			write_c0_config6(config6 |
+					 (calculate_ftlb_probability(c)
+					  << MIPS_CONF6_FTLBP_SHIFT)
+					 | MIPS_CONF6_FTLBEN);
 		else
 			/* Disable FTLB */
 			write_c0_config6(config6 &  ~MIPS_CONF6_FTLBEN);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 31b1b763cb29..c5c4fd54d797 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -94,12 +94,12 @@ int rtlx_open(int index, int can_sleep)
 	int ret = 0;
 
 	if (index >= RTLX_CHANNELS) {
-		pr_debug(KERN_DEBUG "rtlx_open index out of range\n");
+		pr_debug("rtlx_open index out of range\n");
 		return -ENOSYS;
 	}
 
 	if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
-		pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
+		pr_debug("rtlx_open channel %d already opened\n", index);
 		ret = -EBUSY;
 		goto out_fail;
 	}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index d21ec57b6e95..f3b635f86c39 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -485,7 +485,7 @@ static void __init bootmem_init(void)
  * NOTE: historically plat_mem_setup did the entire platform initialization.
  *	 This was rather impractical because it meant plat_mem_setup had to
  * get away without any kind of memory allocator.  To keep old code from
- * breaking plat_setup was just renamed to plat_setup and a second platform
+ * breaking plat_setup was just renamed to plat_mem_setup and a second platform
  * initialization hook for anything else was introduced.
  */
 
@@ -493,7 +493,7 @@ static int usermem __initdata;
 
 static int __init early_parse_mem(char *p)
 {
-	unsigned long start, size;
+	phys_t start, size;
 
 	/*
 	 * If a user specifies memory size, we
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 1d57605e4615..16f1e4f2bf3c 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -658,13 +658,13 @@ static int signal_setup(void)
 		save_fp_context = _save_fp_context;
 		restore_fp_context = _restore_fp_context;
 	} else {
-		save_fp_context = copy_fp_from_sigcontext;
-		restore_fp_context = copy_fp_to_sigcontext;
+		save_fp_context = copy_fp_to_sigcontext;
+		restore_fp_context = copy_fp_from_sigcontext;
 	}
 #endif /* CONFIG_SMP */
 #else
-	save_fp_context = copy_fp_from_sigcontext;;
-	restore_fp_context = copy_fp_to_sigcontext;
+	save_fp_context = copy_fp_to_sigcontext;
+	restore_fp_context = copy_fp_from_sigcontext;
 #endif
 
 	return 0;
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 0bb9cc9dc621..d87e03330b29 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o
 # Serial port support
 #
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SERIAL_8250) += serial.o
+loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
+obj-y += $(loongson-serial-m) $(loongson-serial-y)
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
 obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index b5f228e7eae6..e3328a96e809 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1872,8 +1872,16 @@ build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l,
 	uasm_l_smp_pgtable_change(l, *p);
 #endif
 	iPTE_LW(p, wr.r1, wr.r2); /* get even pte */
-	if (!m4kc_tlbp_war())
+	if (!m4kc_tlbp_war()) {
 		build_tlb_probe_entry(p);
+		if (cpu_has_htw) {
+			/* race condition happens, leaving */
+			uasm_i_ehb(p);
+			uasm_i_mfc0(p, wr.r3, C0_INDEX);
+			uasm_il_bltz(p, r, wr.r3, label_leave);
+			uasm_i_nop(p);
+		}
+	}
 	return wr;
 }
 
diff --git a/arch/mips/mti-sead3/sead3-leds.c b/arch/mips/mti-sead3/sead3-leds.c
index 20102a6d4141..c427c5778186 100644
--- a/arch/mips/mti-sead3/sead3-leds.c
+++ b/arch/mips/mti-sead3/sead3-leds.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
  */
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
@@ -76,8 +76,4 @@ static int __init led_init(void)
 	return platform_device_register(&fled_device);
 }
 
-module_init(led_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("LED probe driver for SEAD-3");
+device_initcall(led_init);
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index be358a8050c5..6b43af0a34d9 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,6 +1,10 @@
 obj-y				+= setup.o nlm_hal.o cop2-ex.o dt.o
 obj-$(CONFIG_SMP)		+= wakeup.o
-obj-$(CONFIG_USB)		+= usb-init.o
-obj-$(CONFIG_USB)		+= usb-init-xlp2.o
-obj-$(CONFIG_SATA_AHCI)		+= ahci-init.o
-obj-$(CONFIG_SATA_AHCI)		+= ahci-init-xlp2.o
+ifdef CONFIG_USB
+obj-y				+= usb-init.o
+obj-y				+= usb-init-xlp2.o
+endif
+ifdef CONFIG_SATA_AHCI
+obj-y				+= ahci-init.o
+obj-y				+= ahci-init-xlp2.o
+endif