summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 05:46:13 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 05:46:13 +0400
commit8f446a7a069e0af0639385f67c78ee2279bca04c (patch)
tree580cf495616b36ca0af0826afa87c430cdc1e7cb
parent84be4ae2c038e2b03d650cbf2a7cfd9e8d6e9e51 (diff)
parent04ef037c926ddb31088c976538e29eada4fd1490 (diff)
downloadlinux-8f446a7a069e0af0639385f67c78ee2279bca04c.tar.xz
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
-rw-r--r--Documentation/devicetree/bindings/bus/omap-ocp2scp.txt10
-rw-r--r--Documentation/devicetree/bindings/media/exynos5-gsc.txt30
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt196
-rw-r--r--arch/arm/Kconfig53
-rw-r--r--arch/arm/boot/dts/exynos4210-pinctrl.dtsi457
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi37
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi28
-rw-r--r--arch/arm/boot/dts/omap4.dtsi8
-rw-r--r--arch/arm/configs/afeb9260_defconfig1
-rw-r--r--arch/arm/configs/at91rm9200_defconfig2
-rw-r--r--arch/arm/configs/at91sam9261_defconfig2
-rw-r--r--arch/arm/configs/at91sam9263_defconfig3
-rw-r--r--arch/arm/configs/at91sam9g20_defconfig2
-rw-r--r--arch/arm/configs/at91sam9rl_defconfig2
-rw-r--r--arch/arm/configs/cpu9260_defconfig2
-rw-r--r--arch/arm/configs/cpu9g20_defconfig2
-rw-r--r--arch/arm/configs/qil-a9260_defconfig3
-rw-r--r--arch/arm/configs/stamp9g20_defconfig1
-rw-r--r--arch/arm/configs/usb-a9260_defconfig1
-rw-r--r--arch/arm/include/asm/leds.h50
-rw-r--r--arch/arm/kernel/Makefile1
-rw-r--r--arch/arm/kernel/leds.c121
-rw-r--r--arch/arm/kernel/process.c6
-rw-r--r--arch/arm/kernel/time.c17
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c92
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c84
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c60
-rw-r--r--arch/arm/mach-at91/at91sam9263.c4
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c161
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c60
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c14
-rw-r--r--arch/arm/mach-at91/board-carmeva.c14
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c17
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c13
-rw-r--r--arch/arm/mach-at91/board-csb337.c16
-rw-r--r--arch/arm/mach-at91/board-eb9200.c14
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c32
-rw-r--r--arch/arm/mach-at91/board-eco920.c36
-rw-r--r--arch/arm/mach-at91/board-flexibity.c14
-rw-r--r--arch/arm/mach-at91/board-foxg20.c16
-rw-r--r--arch/arm/mach-at91/board-kafa.c17
-rw-r--r--arch/arm/mach-at91/board-kb9202.c37
-rw-r--r--arch/arm/mach-at91/board-neocore926.c13
-rw-r--r--arch/arm/mach-at91/board-picotux200.c14
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c14
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c17
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c17
-rw-r--r--arch/arm/mach-at91/board-rsi-ews.c16
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c39
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c13
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c13
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c14
-rw-r--r--arch/arm/mach-at91/board-usb-a926x.c2
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c16
-rw-r--r--arch/arm/mach-at91/include/mach/board.h1
-rw-r--r--arch/arm/mach-at91/leds.c105
-rw-r--r--arch/arm/mach-clps711x/Makefile2
-rw-r--r--arch/arm/mach-clps711x/p720t-leds.c63
-rw-r--r--arch/arm/mach-clps711x/p720t.c62
-rw-r--r--arch/arm/mach-ebsa110/Makefile4
-rw-r--r--arch/arm/mach-ebsa110/leds.c81
-rw-r--r--arch/arm/mach-exynos/Kconfig2
-rw-r--r--arch/arm/mach-exynos/clock-exynos5.c86
-rw-r--r--arch/arm/mach-exynos/common.c26
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h5
-rw-r--r--arch/arm/mach-exynos/mach-exynos5-dt.c8
-rw-r--r--arch/arm/mach-footbridge/Makefile4
-rw-r--r--arch/arm/mach-footbridge/ebsa285-leds.c138
-rw-r--r--arch/arm/mach-footbridge/ebsa285.c81
-rw-r--r--arch/arm/mach-footbridge/netwinder-hw.c112
-rw-r--r--arch/arm/mach-footbridge/netwinder-leds.c138
-rw-r--r--arch/arm/mach-integrator/Makefile3
-rw-r--r--arch/arm/mach-integrator/core.c3
-rw-r--r--arch/arm/mach-integrator/include/mach/cm.h2
-rw-r--r--arch/arm/mach-integrator/leds.c161
-rw-r--r--arch/arm/mach-ks8695/Makefile3
-rw-r--r--arch/arm/mach-ks8695/devices.c21
-rw-r--r--arch/arm/mach-ks8695/include/mach/devices.h5
-rw-r--r--arch/arm/mach-ks8695/leds.c92
-rw-r--r--arch/arm/mach-omap1/Makefile8
-rw-r--r--arch/arm/mach-omap1/board-h2.c32
-rw-r--r--arch/arm/mach-omap1/board-h3.c32
-rw-r--r--arch/arm/mach-omap1/board-osk.c33
-rw-r--r--arch/arm/mach-omap1/leds-h2p2-debug.c169
-rw-r--r--arch/arm/mach-omap1/leds-innovator.c98
-rw-r--r--arch/arm/mach-omap1/leds-osk.c113
-rw-r--r--arch/arm/mach-omap1/leds.c70
-rw-r--r--arch/arm/mach-omap1/leds.h3
-rw-r--r--arch/arm/mach-omap1/time.c1
-rw-r--r--arch/arm/mach-omap1/timer32k.c1
-rw-r--r--arch/arm/mach-omap2/Kconfig2
-rw-r--r--arch/arm/mach-omap2/Makefile5
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c72
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c1
-rw-r--r--arch/arm/mach-pxa/Makefile8
-rw-r--r--arch/arm/mach-pxa/idp.c81
-rw-r--r--arch/arm/mach-pxa/leds-idp.c115
-rw-r--r--arch/arm/mach-pxa/leds-lubbock.c124
-rw-r--r--arch/arm/mach-pxa/leds-mainstone.c119
-rw-r--r--arch/arm/mach-pxa/leds.c32
-rw-r--r--arch/arm/mach-pxa/leds.h13
-rw-r--r--arch/arm/mach-pxa/lubbock.c95
-rw-r--r--arch/arm/mach-pxa/mainstone.c94
-rw-r--r--arch/arm/mach-realview/core.c39
-rw-r--r--arch/arm/mach-realview/core.h2
-rw-r--r--arch/arm/mach-realview/realview_eb.c5
-rw-r--r--arch/arm/mach-realview/realview_pb1176.c5
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c5
-rw-r--r--arch/arm/mach-realview/realview_pba8.c5
-rw-r--r--arch/arm/mach-realview/realview_pbx.c5
-rw-r--r--arch/arm/mach-sa1100/Makefile9
-rw-r--r--arch/arm/mach-sa1100/assabet.c85
-rw-r--r--arch/arm/mach-sa1100/badge4.c30
-rw-r--r--arch/arm/mach-sa1100/cerf.c42
-rw-r--r--arch/arm/mach-sa1100/hackkit.c32
-rw-r--r--arch/arm/mach-sa1100/lart.c26
-rw-r--r--arch/arm/mach-sa1100/leds-assabet.c113
-rw-r--r--arch/arm/mach-sa1100/leds-badge4.c110
-rw-r--r--arch/arm/mach-sa1100/leds-cerf.c110
-rw-r--r--arch/arm/mach-sa1100/leds-hackkit.c112
-rw-r--r--arch/arm/mach-sa1100/leds-lart.c101
-rw-r--r--arch/arm/mach-sa1100/leds.c50
-rw-r--r--arch/arm/mach-sa1100/leds.h13
-rw-r--r--arch/arm/mach-shark/Makefile4
-rw-r--r--arch/arm/mach-shark/core.c1
-rw-r--r--arch/arm/mach-shark/leds.c220
-rw-r--r--arch/arm/mach-tegra/tegra20_clocks_data.c20
-rw-r--r--arch/arm/mach-tegra/tegra30_clocks_data.c15
-rw-r--r--arch/arm/mach-versatile/core.c5
-rw-r--r--arch/arm/plat-omap/Kconfig3
-rw-r--r--arch/arm/plat-omap/debug-leds.c293
-rw-r--r--arch/arm/plat-samsung/time.c1
-rw-r--r--arch/arm/plat-versatile/Kconfig4
-rw-r--r--arch/arm/plat-versatile/leds.c8
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/bus/Kconfig21
-rw-r--r--drivers/bus/Makefile8
-rw-r--r--drivers/bus/omap-ocp2scp.c88
-rw-r--r--drivers/bus/omap_l3_noc.c (renamed from arch/arm/mach-omap2/omap_l3_noc.c)4
-rw-r--r--drivers/bus/omap_l3_noc.h (renamed from arch/arm/mach-omap2/omap_l3_noc.h)0
-rw-r--r--drivers/bus/omap_l3_smx.c (renamed from arch/arm/mach-omap2/omap_l3_smx.c)0
-rw-r--r--drivers/bus/omap_l3_smx.h (renamed from arch/arm/mach-omap2/omap_l3_smx.h)0
-rw-r--r--drivers/char/nwflash.c34
-rw-r--r--drivers/gpio/gpio-samsung.c21
-rw-r--r--drivers/i2c/busses/i2c-tegra.c130
-rw-r--r--drivers/leds/Kconfig10
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/ledtrig-cpu.c163
-rw-r--r--drivers/mtd/nand/Kconfig40
-rw-r--r--drivers/pinctrl/Kconfig9
-rw-r--r--drivers/pinctrl/Makefile2
-rw-r--r--drivers/pinctrl/pinctrl-exynos.c579
-rw-r--r--drivers/pinctrl/pinctrl-exynos.h218
-rw-r--r--drivers/pinctrl/pinctrl-samsung.c888
-rw-r--r--drivers/pinctrl/pinctrl-samsung.h239
-rw-r--r--include/linux/leds.h16
162 files changed, 4908 insertions, 3542 deletions
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
new file mode 100644
index 000000000000..d2fe064a828b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -0,0 +1,10 @@
+* OMAP OCP2SCP - ocp interface to scp interface
+
+properties:
+- compatible : Should be "ti,omap-ocp2scp"
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+- ranges : the child address space are mapped 1:1 onto the parent address space
+- ti,hwmods : must be "ocp2scp_usb_phy"
+
+Sub-nodes:
+All the devices connected to ocp2scp are described using sub-node to ocp2scp
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
new file mode 100644
index 000000000000..0604d42f38d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
@@ -0,0 +1,30 @@
+* Samsung Exynos5 G-Scaler device
+
+G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
+
+Required properties:
+- compatible: should be "samsung,exynos5-gsc"
+- reg: should contain G-Scaler physical address location and length.
+- interrupts: should contain G-Scaler interrupt number
+
+Example:
+
+gsc_0: gsc@0x13e00000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <0 85 0>;
+};
+
+Aliases:
+Each G-Scaler node should have a numbered alias in the aliases node,
+in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
+to retrieve the device IDs using "of_alias_get_id()" call.
+
+Example:
+
+aliases {
+ gsc0 =&gsc_0;
+ gsc1 =&gsc_1;
+ gsc2 =&gsc_2;
+ gsc3 =&gsc_3;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
new file mode 100644
index 000000000000..03dee50532f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -0,0 +1,196 @@
+Samsung GPIO and Pin Mux/Config controller
+
+Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
+controller. It controls the input/output settings on the available pads/pins
+and also provides ability to multiplex and configure the output of various
+on-chip controllers onto these pads.
+
+Required Properties:
+- compatible: should be one of the following.
+ - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
+ - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
+
+- reg: Base address of the pin controller hardware module and length of
+ the address space it occupies.
+
+- interrupts: interrupt specifier for the controller. The format and value of
+ the interrupt specifier depends on the interrupt parent for the controller.
+
+- Pin mux/config groups as child nodes: The pin mux (selecting pin function
+ mode) and pin config (pull up/down, driver strength) settings are represented
+ as child nodes of the pin-controller node. There should be atleast one
+ child node and there is no limit on the count of these child nodes.
+
+ The child node should contain a list of pin(s) on which a particular pin
+ function selection or pin configuration (or both) have to applied. This
+ list of pins is specified using the property name "samsung,pins". There
+ should be atleast one pin specfied for this property and there is no upper
+ limit on the count of pins that can be specified. The pins are specified
+ using pin names which are derived from the hardware manual of the SoC. As
+ an example, the pins in GPA0 bank of the pin controller can be represented
+ as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
+ The format of the pin names should be (as per the hardware manual)
+ "[pin bank name]-[pin number within the bank]".
+
+ The pin function selection that should be applied on the pins listed in the
+ child node is specified using the "samsung,pin-function" property. The value
+ of this property that should be applied to each of the pins listed in the
+ "samsung,pins" property should be picked from the hardware manual of the SoC
+ for the specified pin group. This property is optional in the child node if
+ no specific function selection is desired for the pins listed in the child
+ node. The value of this property is used as-is to program the pin-controller
+ function selector register of the pin-bank.
+
+ The child node can also optionally specify one or more of the pin
+ configuration that should be applied on all the pins listed in the
+ "samsung,pins" property of the child node. The following pin configuration
+ properties are supported.
+
+ - samsung,pin-pud: Pull up/down configuration.
+ - samsung,pin-drv: Drive strength configuration.
+ - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
+ - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
+
+ The values specified by these config properties should be derived from the
+ hardware manual and these values are programmed as-is into the pin
+ pull up/down and driver strength register of the pin-controller.
+
+ Note: A child should include atleast a pin function selection property or
+ pin configuration property (one or more) or both.
+
+ The client nodes that require a particular pin function selection and/or
+ pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
+ file.
+
+External GPIO and Wakeup Interrupts:
+
+The controller supports two types of external interrupts over gpio. The first
+is the external gpio interrupt and second is the external wakeup interrupts.
+The difference between the two is that the external wakeup interrupts can be
+used as system wakeup events.
+
+A. External GPIO Interrupts: For supporting external gpio interrupts, the
+ following properties should be specified in the pin-controller device node.
+
+- interrupt-controller: identifies the controller node as interrupt-parent.
+- #interrupt-cells: the value of this property should be 2.
+ - First Cell: represents the external gpio interrupt number local to the
+ external gpio interrupt space of the controller.
+ - Second Cell: flags to identify the type of the interrupt
+ - 1 = rising edge triggered
+ - 2 = falling edge triggered
+ - 3 = rising and falling edge triggered
+ - 4 = high level triggered
+ - 8 = low level triggered
+
+B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
+ child node representing the external wakeup interrupt controller should be
+ included in the pin-controller device node. This child node should include
+ the following properties.
+
+ - compatible: identifies the type of the external wakeup interrupt controller
+ The possible values are:
+ - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
+ found on Samsung Exynos4210 SoC.
+ - interrupt-parent: phandle of the interrupt parent to which the external
+ wakeup interrupts are forwarded to.
+ - interrupt-controller: identifies the node as interrupt-parent.
+ - #interrupt-cells: the value of this property should be 2
+ - First Cell: represents the external wakeup interrupt number local to
+ the external wakeup interrupt space of the controller.
+ - Second Cell: flags to identify the type of the interrupt
+ - 1 = rising edge triggered
+ - 2 = falling edge triggered
+ - 3 = rising and falling edge triggered
+ - 4 = high level triggered
+ - 8 = low level triggered
+
+Aliases:
+
+All the pin controller nodes should be represented in the aliases node using
+the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+Example 1: A pin-controller node with pin groups.
+
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 47 0>;
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+Example 2: A pin-controller node with external wakeup interrupt controller node.
+
+ pinctrl_1: pinctrl@11000000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 46 0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+ <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+ <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+ <0 32 0>;
+ };
+ };
+
+Example 3: A uart client node that supports 'default' and 'flow-control' states.
+
+ uart@13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 52 0>;
+ pinctrl-names = "default", "flow-control;
+ pinctrl-0 = <&uart0_data>;
+ pinctrl-1 = <&uart0_data &uart0_fctl>;
+ };
+
+Example 4: Set up the default pin state for uart controller.
+
+ static int s3c24xx_serial_probe(struct platform_device *pdev) {
+ struct pinctrl *pinctrl;
+ ...
+ ...
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ }
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ad790fc25ed4..2201ff3002a7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1768,59 +1768,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
-config LEDS
- bool "Timer and CPU usage LEDs"
- depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || ARCH_DAVINCI || \
- ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-
- If you are compiling a kernel for a NetWinder or EBSA-285, you will
- be able to select which LEDs are active using the options below. If
- you are compiling a kernel for the EBSA-110 or the LART however, the
- red LED will simply flash regularly to indicate that the system is
- still functional. It is safe to say Y here if you have a CATS
- system, but the driver will do nothing.
-
-config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
- OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- depends on !GENERIC_CLOCKEVENTS
- default y if ARCH_EBSA110
- help
- If you say Y here, one of the system LEDs (the green one on the
- NetWinder, the amber one on the EBSA285, or the red one on the LART)
- will flash regularly to indicate that the system is still
- operational. This is mainly useful to kernel hackers who are
- debugging unstable kernels.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
-config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
- !ARCH_OMAP) \
- || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
- time indication of CPU usage, by lighting whenever the idle task
- is not currently executing.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
config ALIGNMENT_TRAP
bool
depends on CPU_CP15_MMU
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
new file mode 100644
index 000000000000..b12cf272ad0d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -0,0 +1,457 @@
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ pinctrl@11400000 {
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_audio_a: uart-audio-a {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_audio_b: uart-audio-b {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpb-6", "gpb-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ac97_bus: ac97-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpc1-0", "gpc1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpc1-3", "gpc1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpd1-2", "gpd1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@11000000 {
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_clk: sd4-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_cmd: sd4-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_cd: sd4-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_bus1: sd4-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_bus4: sd4-bus-width4 {
+ samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_bus8: sd4-bus-width8 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <4>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpk1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpk1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpk1-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpk1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpk2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpk2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpk2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpk2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_bus8: sd2-bus-width8 {
+ samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_clk: sd3-clk {
+ samsung,pins = "gpk3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pins = "gpk3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_cd: sd3-cd {
+ samsung,pins = "gpk3-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_bus1: sd3-bus-width1 {
+ samsung,pins = "gpk3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint0: ext-int0 {
+ samsung,pins = "gpx0-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint8: ext-int8 {
+ samsung,pins = "gpx1-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint15: ext-int15 {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint16: ext-int16 {
+ samsung,pins = "gpx2-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint31: ext-int31 {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@03860000 {
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm0_bus: pcm0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4";
+ samsung,pin-function = <0x3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 02891fe876e4..a4bd0c9a206e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -20,6 +20,7 @@
*/
/include/ "skeleton.dtsi"
+/include/ "exynos4210-pinctrl.dtsi"
/ {
compatible = "samsung,exynos4210";
@@ -29,6 +30,9 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
};
gic:interrupt-controller@10490000 {
@@ -50,6 +54,39 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 47 0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinctrl_1: pinctrl@11000000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 46 0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+ <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+ <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+ <0 32 0>;
+ };
+ };
+
+ pinctrl_2: pinctrl@03860000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x03860000 0x1000>;
+ };
+
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 004aaa8d123c..b55794b494b4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -27,6 +27,10 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
+ gsc0 = &gsc_0;
+ gsc1 = &gsc_1;
+ gsc2 = &gsc_2;
+ gsc3 = &gsc_3;
};
gic:interrupt-controller@10481000 {
@@ -460,4 +464,28 @@
#gpio-cells = <4>;
};
};
+
+ gsc_0: gsc@0x13e00000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <0 85 0>;
+ };
+
+ gsc_1: gsc@0x13e10000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e10000 0x1000>;
+ interrupts = <0 86 0>;
+ };
+
+ gsc_2: gsc@0x13e20000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e20000 0x1000>;
+ interrupts = <0 87 0>;
+ };
+
+ gsc_3: gsc@0x13e30000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e30000 0x1000>;
+ interrupts = <0 88 0>;
+ };
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5d1c48459e6e..3883f94fdbd0 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -430,5 +430,13 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ ocp2scp {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp_usb_phy";
+ };
};
};
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 2afdf67c2127..c285a9d777d9 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -39,7 +39,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index d54e2acd3ab1..4ae57a34a582 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -232,7 +232,7 @@ CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=y
+CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig
index ade6b2f23116..1e8712ef062e 100644
--- a/arch/arm/configs/at91sam9261_defconfig
+++ b/arch/arm/configs/at91sam9261_defconfig
@@ -128,7 +128,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index 1cf96264cba1..d2050cada82d 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -61,7 +61,6 @@ CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
@@ -138,7 +137,7 @@ CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_ATMEL_PWM=y
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 994d331b2319..e1b0e80b54a5 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -99,7 +99,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index ad562ee64209..7cf87856d63c 100644
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -60,7 +60,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index bbf729e2fb6f..921480c23b98 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index e7d7942927f3..ea116cbdffa1 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 9160f3b7751f..42d5db1876ab 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -50,7 +50,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
@@ -87,7 +86,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index d5e260b8b160..52f1488591c7 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -100,7 +100,6 @@ CONFIG_USB_ETH=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 2e39f38b9627..a1501e1e1a90 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -49,7 +49,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
deleted file mode 100644
index c545739f39b7..000000000000
--- a/arch/arm/include/asm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/include/asm/leds.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Event-driven interface for LEDs on machines
- * Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
- led_idle_start,
- led_idle_end,
- led_timer,
- led_start,
- led_stop,
- led_claim, /* override idle & timer leds */
- led_release, /* restore idle & timer leds */
- led_start_timer_mode,
- led_stop_timer_mode,
- led_green_on,
- led_green_off,
- led_amber_on,
- led_amber_off,
- led_red_on,
- led_red_off,
- led_blue_on,
- led_blue_off,
- /*
- * I want this between led_timer and led_start, but
- * someone has decided to export this to user space
- */
- led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1c4321430737..d81f3a6d9ad8 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -21,7 +21,6 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \
obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
deleted file mode 100644
index 1911dae19e4f..000000000000
--- a/arch/arm/kernel/leds.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- * Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/string.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
- const char name[8];
- int on;
- int off;
-};
-
-static const struct leds_evt_name evt_names[] = {
- { "amber", led_amber_on, led_amber_off },
- { "blue", led_blue_on, led_blue_off },
- { "green", led_green_on, led_green_off },
- { "red", led_red_on, led_red_off },
-};
-
-static ssize_t leds_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- int ret = -EINVAL, len = strcspn(buf, " ");
-
- if (len > 0 && buf[len] == '\0')
- len--;
-
- if (strncmp(buf, "claim", len) == 0) {
- leds_event(led_claim);
- ret = size;
- } else if (strncmp(buf, "release", len) == 0) {
- leds_event(led_release);
- ret = size;
- } else {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
- if (strlen(evt_names[i].name) != len ||
- strncmp(buf, evt_names[i].name, len) != 0)
- continue;
- if (strncmp(buf+len, " on", 3) == 0) {
- leds_event(evt_names[i].on);
- ret = size;
- } else if (strncmp(buf+len, " off", 4) == 0) {
- leds_event(evt_names[i].off);
- ret = size;
- }
- break;
- }
- }
- return ret;
-}
-
-static DEVICE_ATTR(event, 0200, NULL, leds_store);
-
-static struct bus_type leds_subsys = {
- .name = "leds",
- .dev_name = "leds",
-};
-
-static struct device leds_device = {
- .id = 0,
- .bus = &leds_subsys,
-};
-
-static int leds_suspend(void)
-{
- leds_event(led_stop);
- return 0;
-}
-
-static void leds_resume(void)
-{
- leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
- leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
- .shutdown = leds_shutdown,
- .suspend = leds_suspend,
- .resume = leds_resume,
-};
-
-static int __init leds_init(void)
-{
- int ret;
- ret = subsys_system_register(&leds_subsys, NULL);
- if (ret == 0)
- ret = device_register(&leds_device);
- if (ret == 0)
- ret = device_create_file(&leds_device, &dev_attr_event);
- if (ret == 0)
- register_syscore_ops(&leds_syscore_ops);
- return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 693b744fd572..04eea22d7958 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -31,9 +31,9 @@
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
#include <linux/cpuidle.h>
+#include <linux/leds.h>
#include <asm/cacheflush.h>
-#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/thread_notify.h>
#include <asm/stacktrace.h>
@@ -189,7 +189,7 @@ void cpu_idle(void)
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
- leds_event(led_idle_start);
+ ledtrig_cpu(CPU_LED_IDLE_START);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
@@ -220,7 +220,7 @@ void cpu_idle(void)
} else
local_irq_enable();
}
- leds_event(led_idle_end);
+ ledtrig_cpu(CPU_LED_IDLE_END);
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index af2afb019672..09be0c3c9069 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -25,7 +25,6 @@
#include <linux/timer.h>
#include <linux/irq.h>
-#include <asm/leds.h>
#include <asm/thread_info.h>
#include <asm/sched_clock.h>
#include <asm/stacktrace.h>
@@ -80,21 +79,6 @@ u32 arch_gettimeoffset(void)
}
#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
- static unsigned int count = HZ/2;
-
- if (--count == 0) {
- count = HZ/2;
- leds_event(led_timer);
- }
-}
-#else
-#define do_leds()
-#endif
-
-
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@@ -102,7 +86,6 @@ static inline void do_leds(void)
void timer_tick(void)
{
profile_tick(CPU_PROFILING);
- do_leds();
xtime_update(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01fb7325fecc..9ac427a702da 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@@ -312,7 +312,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91rm9200_mmc_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
+ unsigned int i;
+ unsigned int slot_count = 0;
+
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA27, 0);
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
- if (data->slot_b) {
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA8, 1);
+ if (!data->slot[i].bus_width)
+ continue;
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA9, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA10, 1);
- at91_set_B_periph(AT91_PIN_PA11, 1);
- at91_set_B_periph(AT91_PIN_PA12, 1);
+ /* input/irq */
+ if (gpio_is_valid(data->slot[i].detect_pin)) {
+ at91_set_gpio_input(data->slot[i].detect_pin, 1);
+ at91_set_deglitch(data->slot[i].detect_pin, 1);
}
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA28, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA29, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PB3, 1);
- at91_set_B_periph(AT91_PIN_PB4, 1);
- at91_set_B_periph(AT91_PIN_PB5, 1);
+ if (gpio_is_valid(data->slot[i].wp_pin))
+ at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+ switch (i) {
+ case 0: /* slot A */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA28, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA29, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PB3, 1);
+ at91_set_B_periph(AT91_PIN_PB4, 1);
+ at91_set_B_periph(AT91_PIN_PB5, 1);
+ }
+ slot_count++;
+ break;
+ case 1: /* slot B */
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA8, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA9, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PA10, 1);
+ at91_set_B_periph(AT91_PIN_PA11, 1);
+ at91_set_B_periph(AT91_PIN_PA12, 1);
+ }
+ slot_count++;
+ break;
+ default:
+ printk(KERN_ERR
+ "AT91: SD/MMC slot %d not available\n", i);
+ break;
+ }
+ if (slot_count) {
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA27, 0);
+
+ mmc_data = *data;
+ platform_device_register(&at91rm9200_mmc_device);
}
}
- mmc_data = *data;
- platform_device_register(&at91rm9200_mmc_device);
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index bce572a530ef..af50ff3281c7 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -209,92 +209,10 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_MCI,
- .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA8, 0);
-
- if (data->slot_b) {
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA6, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
* MMC / SD Slot for Atmel MCI Driver
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct mci_platform_data mmc_data;
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index bc2590d712d0..11e9fa835cde 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@@ -155,7 +155,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91sam9261_mmc_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_B_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA6, 1);
- }
+ if (data->slot[0].bus_width) {
+ /* input/irq */
+ if (gpio_is_valid(data->slot[0].detect_pin)) {
+ at91_set_gpio_input(data->slot[0].detect_pin, 1);
+ at91_set_deglitch(data->slot[0].detect_pin, 1);
+ }
+ if (gpio_is_valid(data->slot[0].wp_pin))
+ at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+ /* CLK */
+ at91_set_B_periph(AT91_PIN_PA2, 0);
- mmc_data = *data;
- platform_device_register(&at91sam9261_mmc_device);
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->slot[0].bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ at91_set_B_periph(AT91_PIN_PA6, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9261_mmc_device);
+ }
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 84b38105231e..144ef5de51b6 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -188,8 +188,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 9b6ca734f1a9..7c0898fe20fa 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
+static struct mci_platform_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
[0] = {
@@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = {
};
static struct platform_device at91sam9263_mmc0_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = {
};
static struct platform_device at91sam9263_mmc1_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = {
.num_resources = ARRAY_SIZE(mmc1_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
+ unsigned int i;
+ unsigned int slot_count = 0;
+
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
- if (mmc_id == 0) { /* MCI0 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA12, 0);
+ if (!data->slot[i].bus_width)
+ continue;
- if (data->slot_b) {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA16, 1);
+ /* input/irq */
+ if (gpio_is_valid(data->slot[i].detect_pin)) {
+ at91_set_gpio_input(data->slot[i].detect_pin,
+ 1);
+ at91_set_deglitch(data->slot[i].detect_pin,
+ 1);
+ }
+ if (gpio_is_valid(data->slot[i].wp_pin))
+ at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+ if (mmc_id == 0) { /* MCI0 */
+ switch (i) {
+ case 0: /* slot A */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+ slot_count++;
+ break;
+ case 1: /* slot B */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ }
+ slot_count++;
+ break;
+ default:
+ printk(KERN_ERR
+ "AT91: SD/MMC slot %d not available\n", i);
+ break;
+ }
+ if (slot_count) {
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA12, 0);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA17, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA18, 1);
- at91_set_A_periph(AT91_PIN_PA19, 1);
- at91_set_A_periph(AT91_PIN_PA20, 1);
+ mmc0_data = *data;
+ platform_device_register(&at91sam9263_mmc0_device);
}
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
+ } else if (mmc_id == 1) { /* MCI1 */
+ switch (i) {
+ case 0: /* slot A */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA8, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ slot_count++;
+ break;
+ case 1: /* slot B */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA22, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA23, 1);
+ at91_set_A_periph(AT91_PIN_PA24, 1);
+ at91_set_A_periph(AT91_PIN_PA25, 1);
+ }
+ slot_count++;
+ break;
+ default:
+ printk(KERN_ERR
+ "AT91: SD/MMC slot %d not available\n", i);
+ break;
}
- }
+ if (slot_count) {
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA6, 0);
- mmc0_data = *data;
- platform_device_register(&at91sam9263_mmc0_device);
- } else { /* MCI1 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA6, 0);
-
- if (data->slot_b) {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA21, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA22, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA23, 1);
- at91_set_A_periph(AT91_PIN_PA24, 1);
- at91_set_A_periph(AT91_PIN_PA25, 1);
- }
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA8, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
+ mmc1_data = *data;
+ platform_device_register(&at91sam9263_mmc1_device);
}
}
-
- mmc1_data = *data;
- platform_device_register(&at91sam9263_mmc1_device);
}
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index b3d365dadef5..1fad22f7e21f 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@@ -179,7 +179,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91sam9rl_mmc_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
+ if (data->slot[0].bus_width) {
+ /* input/irq */
+ if (gpio_is_valid(data->slot[0].detect_pin)) {
+ at91_set_gpio_input(data->slot[0].detect_pin, 1);
+ at91_set_deglitch(data->slot[0].detect_pin, 1);
+ }
+ if (gpio_is_valid(data->slot[0].wp_pin))
+ at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->slot[0].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9rl_mmc_device);
}
-
- mmc_data = *data;
- platform_device_register(&at91sam9rl_mmc_device);
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index de7be1931817..93a832f70232 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -133,12 +133,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
- .det_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- .slot_b = 1,
- .wire4 = 1,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata afeb9260_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC9,
+ .wp_pin = AT91_PIN_PC4,
+ },
};
@@ -199,7 +199,7 @@ static void __init afeb9260_board_init(void)
at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
/* MMC */
- at91_add_device_mmc(0, &afeb9260_mmc_data);
+ at91_add_device_mci(0, &afeb9260_mci0_data);
/* I2C */
at91_add_device_i2c(afeb9260_i2c_devices,
ARRAY_SIZE(afeb9260_i2c_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index a5b002f32a61..71d8f362a1d5 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -71,12 +71,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
// .vcc_pin = -EINVAL,
// };
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PB10,
- .wp_pin = AT91_PIN_PC14,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata carmeva_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB10,
+ .wp_pin = AT91_PIN_PC14,
+ },
};
static struct spi_board_info carmeva_spi_devices[] = {
@@ -150,7 +150,7 @@ static void __init carmeva_board_init(void)
/* Compact Flash */
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
- at91_add_device_mmc(0, &carmeva_mmc_data);
+ at91_add_device_mci(0, &carmeva_mci0_data);
/* LEDs */
at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
}
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index ecbc13b594de..e71c473316e3 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -254,8 +254,7 @@ static struct gpio_led cpu9krea_leds[] = {
static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-ds1307", 0x68),
- .type = "ds1339",
+ I2C_BOARD_INFO("ds1339", 0x68),
},
};
@@ -312,12 +311,12 @@ static void __init cpu9krea_add_device_buttons(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PA29,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata cpu9krea_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PA29,
+ .wp_pin = -EINVAL,
+ },
};
static void __init cpu9krea_board_init(void)
@@ -359,7 +358,7 @@ static void __init cpu9krea_board_init(void)
/* Ethernet */
at91_add_device_eth(&cpu9krea_macb_data);
/* MMC */
- at91_add_device_mmc(0, &cpu9krea_mmc_data);
+ at91_add_device_mci(0, &cpu9krea_mci0_data);
/* I2C */
at91_add_device_i2c(cpu9krea_i2c_devices,
ARRAY_SIZE(cpu9krea_i2c_devices));
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2e6d043c82f2..2cbd1a2b6c35 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -78,11 +78,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
.pullup_pin = AT91_PIN_PC14,
};
-static struct at91_mmc_data __initdata cpuat91_mmc_data = {
- .det_pin = AT91_PIN_PC2,
- .wire4 = 1,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata cpuat91_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC2,
+ .wp_pin = -EINVAL,
+ },
};
static struct physmap_flash_data cpuat91_flash_data = {
@@ -168,7 +169,7 @@ static void __init cpuat91_board_init(void)
/* USB Device */
at91_add_device_udc(&cpuat91_udc_data);
/* MMC */
- at91_add_device_mmc(0, &cpuat91_mmc_data);
+ at91_add_device_mci(0, &cpuat91_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Platform devices */
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 462bc319cbc5..3e37437a7a61 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -87,12 +87,12 @@ static struct at91_cf_data __initdata csb337_cf_data = {
.rst_pin = AT91_PIN_PD2,
};
-static struct at91_mmc_data __initdata csb337_mmc_data = {
- .det_pin = AT91_PIN_PD5,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PD6,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata csb337_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PD5,
+ .wp_pin = AT91_PIN_PD6,
+ },
};
static struct spi_board_info csb337_spi_devices[] = {
@@ -220,8 +220,6 @@ static struct gpio_led csb_leds[] = {
static void __init csb337_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Serial */
/* DBGU on ttyS0 */
at91_register_uart(0, 0, 0);
@@ -240,7 +238,7 @@ static void __init csb337_board_init(void)
/* SPI */
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &csb337_mmc_data);
+ at91_add_device_mci(0, &csb337_mci0_data);
/* NOR flash */
platform_device_register(&csb_flash);
/* LEDs */
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d1e1f3fc0a47..0cfac16ee9d5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -70,12 +70,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
.rst_pin = AT91_PIN_PC5,
};
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata eb9200_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
@@ -113,7 +113,7 @@ static void __init eb9200_board_init(void)
at91_add_device_spi(NULL, 0);
/* MMC */
/* only supports 1 or 4 bit interface, not wired through to SPI */
- at91_add_device_mmc(0, &eb9200_mmc_data);
+ at91_add_device_mci(0, &eb9200_mci0_data);
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 9c24cb25707c..3d931ffac4bf 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,12 +64,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = {
.overcurrent_pin= {-EINVAL, -EINVAL},
};
-static struct at91_mmc_data __initdata ecb_at91mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ecbat91_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
@@ -138,11 +138,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC7,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
static void __init ecb_at91board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -161,10 +170,13 @@ static void __init ecb_at91board_init(void)
at91_add_device_i2c(NULL, 0);
/* MMC */
- at91_add_device_mmc(0, &ecb_at91mmc_data);
+ at91_add_device_mci(0, &ecbat91_mci0_data);
/* SPI */
at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+ /* LEDs */
+ at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
}
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 82bdfde3405f..d93658a2b128 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -56,12 +56,12 @@ static struct at91_udc_data __initdata eco920_udc_data = {
.pullup_pin = AT91_PIN_PB13,
};
-static struct at91_mmc_data __initdata eco920_mmc_data = {
- .slot_b = 0,
- .wire4 = 0,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata eco920_mci0_data = {
+ .slot[0] = {
+ .bus_width = 1,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
static struct physmap_flash_data eco920_flash_data = {
@@ -93,10 +93,26 @@ static struct spi_board_info eco920_spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init eco920_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* DBGU on ttyS0. (Rx & Tx only */
at91_register_uart(0, 0, 0);
at91_add_device_serial();
@@ -104,7 +120,7 @@ static void __init eco920_board_init(void)
at91_add_device_usbh(&eco920_usbh_data);
at91_add_device_udc(&eco920_udc_data);
- at91_add_device_mmc(0, &eco920_mmc_data);
+ at91_add_device_mci(0, &eco920_mci0_data);
platform_device_register(&eco920_flash);
at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
@@ -127,6 +143,8 @@ static void __init eco920_board_init(void)
);
at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+ /* LEDs */
+ at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
}
MACHINE_START(ECO920, "eco920")
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 6cc83a87d77c..fa98abacb1ba 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -75,12 +75,12 @@ static struct spi_board_info flexibity_spi_devices[] = {
};
/* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata flexibity_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC9,
+ .wp_pin = AT91_PIN_PC4,
+ },
};
/* LEDs */
@@ -152,7 +152,7 @@ static void __init flexibity_board_init(void)
at91_add_device_spi(flexibity_spi_devices,
ARRAY_SIZE(flexibity_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &flexibity_mmc_data);
+ at91_add_device_mci(0, &flexibity_mci0_data);
/* LEDs */
at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
}
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 69ab1247ef81..6e47071d8206 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -86,7 +86,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = {
* SPI devices.
*/
static struct spi_board_info foxg20_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -109,12 +109,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
-static struct at91_mmc_data __initdata foxg20_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata foxg20_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
@@ -247,7 +247,7 @@ static void __init foxg20_board_init(void)
/* Ethernet */
at91_add_device_eth(&foxg20_macb_data);
/* MMC */
- at91_add_device_mmc(0, &foxg20_mmc_data);
+ at91_add_device_mci(0, &foxg20_mci0_data);
/* I2C */
at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
/* LEDs */
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 64c1dbf88a07..86050da3ba53 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -66,11 +66,20 @@ static struct at91_udc_data __initdata kafa_udc_data = {
.pullup_pin = AT91_PIN_PB7,
};
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB4,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+};
+
static void __init kafa_board_init(void)
{
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -88,6 +97,8 @@ static void __init kafa_board_init(void)
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
}
MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 5d96cb85175f..abe9fed7a3e0 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,12 +69,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
.pullup_pin = AT91_PIN_PB22,
};
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
- .det_pin = AT91_PIN_PB2,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata kb9202_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB2,
+ .wp_pin = -EINVAL,
+ },
};
static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -96,11 +96,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
.num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC19,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PC18,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init kb9202_board_init(void)
{
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -121,13 +136,15 @@ static void __init kb9202_board_init(void)
/* USB Device */
at91_add_device_udc(&kb9202_udc_data);
/* MMC */
- at91_add_device_mmc(0, &kb9202_mmc_data);
+ at91_add_device_mci(0, &kb9202_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
+ /* LEDs */
+ at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
}
MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 18103c5d993c..9cda3fd346ae 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -138,11 +138,12 @@ static struct spi_board_info neocore926_spi_devices[] = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata neocore926_mmc_data = {
- .wire4 = 1,
- .det_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PE19,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata neocore926_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PE18,
+ .wp_pin = AT91_PIN_PE19,
+ },
};
@@ -354,7 +355,7 @@ static void __init neocore926_board_init(void)
neocore926_add_device_ts();
/* MMC */
- at91_add_device_mmc(1, &neocore926_mmc_data);
+ at91_add_device_mci(0, &neocore926_mci0_data);
/* Ethernet */
at91_add_device_eth(&neocore926_macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 127065504508..f83e1de699e6 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -62,12 +62,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
.overcurrent_pin= {-EINVAL, -EINVAL},
};
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
- .det_pin = AT91_PIN_PB27,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PA17,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata picotux200_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PA17,
+ },
};
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
@@ -112,7 +112,7 @@ static void __init picotux200_board_init(void)
at91_add_device_i2c(NULL, 0);
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &picotux200_mmc_data);
+ at91_add_device_mci(0, &picotux200_mci0_data);
/* NOR Flash */
platform_device_register(&picotux200_flash);
}
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index bf351e285422..799f214edebe 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -156,12 +156,12 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
/*
@@ -245,7 +245,7 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index cc2bf9796073..66338e7ebfba 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -77,12 +77,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata dk_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata dk_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
#endif
@@ -177,9 +177,6 @@ static struct gpio_led dk_leds[] = {
static void __init dk_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -208,7 +205,7 @@ static void __init dk_board_init(void)
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &dk_mmc_data);
+ at91_add_device_mci(0, &dk_mci0_data);
#endif
/* NAND */
at91_add_device_nand(&dk_nand_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 62e19e64c9d3..5d1b5729dc69 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -70,12 +70,12 @@ static struct at91_udc_data __initdata ek_udc_data = {
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .det_pin = AT91_PIN_PB27,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PA17,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PA17,
+ }
};
#endif
@@ -148,9 +148,6 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -177,7 +174,7 @@ static void __init ek_board_init(void)
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index c3b43aefdb75..a0ecf04e9ae3 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -58,11 +58,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
/*
* SD/MC
*/
-static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PB27,
- .wp_pin = AT91_PIN_PB29,
+static struct mci_platform_data __initdata rsi_ews_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PB29,
+ },
};
/*
@@ -185,9 +186,6 @@ static struct platform_device rsiews_nor_flash = {
*/
static void __init rsi_ews_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
/* This one is for debugging */
@@ -215,7 +213,7 @@ static void __init rsi_ews_board_init(void)
at91_add_device_spi(rsi_ews_spi_devices,
ARRAY_SIZE(rsi_ews_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &rsi_ews_mmc_data);
+ at91_add_device_mci(0, &rsi_ews_mci0_data);
/* NOR Flash */
platform_device_register(&rsiews_nor_flash);
/* LEDs */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 7bf6da70d7d5..c5f01acce3c0 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -73,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -158,19 +158,34 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
- .det_pin = AT91_PIN_PC8,
- .wp_pin = AT91_PIN_PC4,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC8,
+ .wp_pin = AT91_PIN_PC4,
+ },
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PA9,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PA6,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
};
static void __init ek_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -194,9 +209,11 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 889c1bf71eb5..8cd6e679fbe0 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -108,7 +108,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -211,12 +211,12 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
@@ -329,7 +329,7 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SSC (to AT73C213) */
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 2269be5fa384..27b3af1a3047 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -340,11 +340,12 @@ static struct spi_board_info ek_spi_devices[] = {
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
#endif /* CONFIG_SPI_ATMEL_* */
@@ -569,9 +570,6 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -598,7 +596,7 @@ static void __init ek_board_init(void)
at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
#else
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &mci0_data);
#endif
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 82adf581afc2..073e17403d98 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -141,11 +141,12 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .wire4 = 1,
- .det_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PE19,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata mci1_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PE18,
+ .wp_pin = AT91_PIN_PE19,
+ },
};
@@ -420,7 +421,7 @@ static void __init ek_board_init(void)
/* Touchscreen */
ek_add_device_ts();
/* MMC */
- at91_add_device_mmc(1, &ek_mmc_data);
+ at91_add_device_mci(1, &mci1_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 4ea4ee00364b..3ab2b86a3762 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -92,7 +92,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -199,7 +199,6 @@ static void __init ek_add_device_nand(void)
* MCI (SD/MMC)
* wp_pin and vcc_pin are not connected
*/
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata ek_mmc_data = {
.slot[1] = {
.bus_width = 4,
@@ -208,28 +207,15 @@ static struct mci_platform_data __initdata ek_mmc_data = {
},
};
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1, /* Only one slot so use slot B */
- .wire4 = 1,
- .det_pin = AT91_PIN_PC9,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
-};
-#endif
static void __init ek_add_device_mmc(void)
{
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
if (ek_have_2mmc()) {
ek_mmc_data.slot[0].bus_width = 4;
ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
ek_mmc_data.slot[0].wp_pin = -1;
}
at91_add_device_mci(0, &ek_mmc_data);
-#else
- at91_add_device_mmc(0, &ek_mmc_data);
-#endif
}
/*
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index e7dc3ead7045..fb89ea92e3f2 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -56,11 +56,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .wire4 = 1,
- .det_pin = AT91_PIN_PA15,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PA15,
+ .wp_pin = -EINVAL,
+ },
};
@@ -303,7 +304,7 @@ static void __init ek_board_init(void)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &mci0_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 29eae1626bf7..c3fb31d5116e 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -83,7 +83,6 @@ static void __init add_device_nand(void)
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata mmc_data = {
.slot[0] = {
.bus_width = 4,
@@ -91,15 +90,6 @@ static struct mci_platform_data __initdata mmc_data = {
.wp_pin = -1,
},
};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
-};
-#endif
/*
@@ -223,11 +213,7 @@ void __init stamp9g20_board_init(void)
/* NAND */
add_device_nand();
/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &mmc_data);
-#else
- at91_add_device_mmc(0, &mmc_data);
-#endif
/* W1 */
add_w1();
}
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1476b9fe7b9..6ea069b57335 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -109,14 +109,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
* SPI devices.
*/
static struct spi_board_info usb_a9263_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
}
-#endif
};
static struct spi_board_info usb_a9g20_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 516d340549d8..f162fdfd66eb 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -119,11 +119,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
/*
* MMC
*/
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
- .det_pin = AT91_PIN_PB9,
- .wire4 = 1,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata yl9200_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB9,
+ .wp_pin = -EINVAL,
+ },
};
/*
@@ -541,9 +542,6 @@ void __init yl9200_add_device_video(void) {}
static void __init yl9200_board_init(void)
{
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -568,7 +566,7 @@ static void __init yl9200_board_init(void)
/* I2C */
at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
/* MMC */
- at91_add_device_mmc(0, &yl9200_mmc_data);
+ at91_add_device_mci(0, &yl9200_mci0_data);
/* NAND */
at91_add_device_nand(&yl9200_nand_data);
/* NOR Flash */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 369afc2ffc5b..c55a4364ffb4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -187,7 +187,6 @@ struct at91_can_data {
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 8dfafe76ffe6..1b1e62b5f41b 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr)
#else
void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
#endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
- at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
- at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
- unsigned long is_off = at91_get_gpio_value(led);
- if (is_off)
- at91_led_on(led);
- else
- at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- at91_led_on(at91_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- at91_led_off(at91_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- at91_led_toggle(at91_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- at91_led_off(at91_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- at91_led_on(at91_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if (!at91_leds_timer || !at91_leds_cpu)
- return -ENODEV;
-
- leds_event = at91_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
-
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index aed9eb664499..6da6940b3656 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,5 +15,3 @@ obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
-leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
-obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index bbc449fbe14a..000000000000
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/leds.c
- *
- * Integrator LED control routines
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 pddr;
-
- local_irq_save(flags);
- switch(ledevt) {
- case led_idle_start:
- break;
-
- case led_idle_end:
- break;
-
- case led_timer:
- pddr = clps_readb(PDDR);
- clps_writeb(pddr ^ 1, PDDR);
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_p720t())
- leds_event = p720t_leds_event;
-
- return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index f266d90b9efc..b752b586fc2f 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,6 +23,8 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/pgtable.h>
@@ -34,6 +36,8 @@
#include <asm/mach/map.h>
#include <mach/syspld.h>
+#include <asm/hardware/clps7111.h>
+
#include "common.h"
/*
@@ -107,6 +111,64 @@ static void __init p720t_init_early(void)
}
}
+/*
+ * LED controled by CPLD
+ */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void p720t_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ u8 reg = clps_readb(PDDR);
+
+ if (b != LED_OFF)
+ reg |= 0x1;
+ else
+ reg &= ~0x1;
+
+ clps_writeb(reg, PDDR);
+}
+
+static enum led_brightness p720t_led_get(struct led_classdev *cdev)
+{
+ u8 reg = clps_readb(PDDR);
+
+ return (reg & 0x1) ? LED_FULL : LED_OFF;
+}
+
+static int __init p720t_leds_init(void)
+{
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_p720t())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "p720t:0";
+ cdev->brightness_set = p720t_led_set;
+ cdev->brightness_get = p720t_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(p720t_leds_init);
+#endif
+
MACHINE_START(P720T, "ARM-Prospector720T")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
index 6520ac835802..935e4af01a27 100644
--- a/arch/arm/mach-ebsa110/Makefile
+++ b/arch/arm/mach-ebsa110/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o io.o
+obj-y := core.o io.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 99e14e362500..0398258c20cd 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -1,52 +1,71 @@
/*
- * linux/arch/arm/mach-ebsa110/leds.c
+ * Driver for the LED found on the EBSA110 machine
+ * Based on Versatile and RealView machine LED code
*
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA-110 LED control routines. We use the led as follows:
- *
- * - Red - toggles state every 50 timer interrupts
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
-#include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include "core.h"
-static spinlock_t leds_lock;
-
-static void ebsa110_leds_event(led_event_t ledevt)
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void ebsa110_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_lock_irqsave(&leds_lock, flags);
+ if (b != LED_OFF)
+ reg |= 0x80;
+ else
+ reg &= ~0x80;
- switch(ledevt) {
- case led_timer:
- *(volatile unsigned char *)SOFT_BASE ^= 128;
- break;
+ __raw_writeb(reg, SOFT_BASE);
+}
- default:
- break;
- }
+static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
+{
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_unlock_irqrestore(&leds_lock, flags);
+ return (reg & 0x80) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init ebsa110_leds_init(void)
{
- if (machine_is_ebsa110())
- leds_event = ebsa110_leds_event;
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_ebsa110())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "ebsa110:0";
+ cdev->brightness_set = ebsa110_led_set;
+ cdev->brightness_get = ebsa110_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa110_leds_init);
+#endif
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6c3299ebbfc5..412884dafa6c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -405,6 +405,8 @@ config MACH_EXYNOS4_DT
select USE_OF
select ARM_AMBA
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+ select PINCTRL
+ select PINCTRL_EXYNOS4
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 618d0aaaa599..f3171c3f3d94 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -547,6 +547,68 @@ static struct clksrc_clk exynos5_clk_aclk_66 = {
.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
};
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
+ .clk = {
+ .name = "mout_aclk_300_gscl_mid",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
+ [0] = &exynos5_clk_sclk_vpll.clk,
+ [1] = &exynos5_clk_mout_cpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
+ .sources = exynos5_clkset_aclk_300_mid1_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
+ .clk = {
+ .name = "mout_aclk_300_gscl_mid1",
+ },
+ .sources = &exynos5_clkset_aclk_300_gscl_mid1,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
+ [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
+ [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
+ .sources = exynos5_clkset_aclk_300_gscl_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
+ .clk = {
+ .name = "mout_aclk_300_gscl",
+ },
+ .sources = &exynos5_clkset_aclk_300_gscl,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_gscl_300_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &exynos5_clk_mout_aclk_300_gscl.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_gscl_300 = {
+ .sources = exynos5_clk_src_gscl_300_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
+ .clk = {
+ .name = "aclk_300_gscl",
+ },
+ .sources = &exynos5_clk_src_gscl_300,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
+};
+
static struct clk exynos5_init_clocks_off[] = {
{
.name = "timers",
@@ -755,6 +817,26 @@ static struct clk exynos5_init_clocks_off[] = {
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 18),
}, {
+ .name = "gscl",
+ .devname = "exynos-gsc.0",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "gscl",
+ .devname = "exynos-gsc.1",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "gscl",
+ .devname = "exynos-gsc.2",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "gscl",
+ .devname = "exynos-gsc.3",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
.name = SYSMMU_CLOCK_NAME,
.devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
.enable = &exynos5_clk_ip_mfc_ctrl,
@@ -1225,6 +1307,10 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_aclk_266,
&exynos5_clk_aclk_200,
&exynos5_clk_aclk_166,
+ &exynos5_clk_aclk_300_gscl,
+ &exynos5_clk_mout_aclk_300_gscl,
+ &exynos5_clk_mout_aclk_300_gscl_mid,
+ &exynos5_clk_mout_aclk_300_gscl_mid1,
&exynos5_clk_aclk_66_pre,
&exynos5_clk_aclk_66,
&exynos5_clk_dout_mmc0,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4eb39cdf75ea..715b690e5009 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -980,6 +980,32 @@ static int __init exynos_init_irq_eint(void)
{
int irq;
+#ifdef CONFIG_PINCTRL_SAMSUNG
+ /*
+ * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
+ * functionality along with support for external gpio and wakeup
+ * interrupts. If the samsung pinctrl driver is enabled and includes
+ * the wakeup interrupt support, then the setting up external wakeup
+ * interrupts here can be skipped. This check here is temporary to
+ * allow exynos4 platforms that do not use Samsung pinctrl driver to
+ * co-exist with platforms that do. When all of the Samsung Exynos4
+ * platforms switch over to using the pinctrl driver, the wakeup
+ * interrupt support code here can be completely removed.
+ */
+ struct device_node *pctrl_np, *wkup_np;
+ const char *pctrl_compat = "samsung,pinctrl-exynos4210";
+ const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
+
+ for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+ if (of_device_is_available(pctrl_np)) {
+ wkup_np = of_find_compatible_node(pctrl_np, NULL,
+ wkup_compat);
+ if (wkup_np)
+ return -ENODEV;
+ }
+ }
+#endif
+
if (soc_is_exynos5250())
exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
else
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 6d33f50c2e56..5aa77f996e59 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -121,6 +121,11 @@
#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
+#define EXYNOS5_PA_GSC0 0x13E00000
+#define EXYNOS5_PA_GSC1 0x13E10000
+#define EXYNOS5_PA_GSC2 0x13E20000
+#define EXYNOS5_PA_GSC3 0x13E30000
+
#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000
#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000
#define EXYNOS5_PA_SYSMMU_2D 0x10A60000
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index ef770bc2318f..e707eb1b1eab 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -56,6 +56,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
+ "exynos-gsc.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
+ "exynos-gsc.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
+ "exynos-gsc.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
+ "exynos-gsc.3", NULL),
{},
};
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 3afb1b25946f..0b64dd430d61 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
obj-$(CONFIG_PCI) +=$(pci-y)
-obj-$(CONFIG_LEDS) +=$(leds-y)
obj-$(CONFIG_ISA) += isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 5bd266754b95..000000000000
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Amber - On if system is not idle
- * - Red - currently unused
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
- hw_led_state |= XBUS_LED_AMBER;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= XBUS_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- *XBUS_LEDS = hw_led_state;
-
- spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_ebsa285())
- leds_event = ebsa285_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 27716a7e5fc1..b09551ef89ca 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -5,6 +5,8 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
@@ -13,6 +15,85 @@
#include "common.h"
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct ebsa285_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} ebsa285_leds[] = {
+ { "ebsa285:amber", "heartbeat", },
+ { "ebsa285:green", "cpu0", },
+ { "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ if (b != LED_OFF)
+ *XBUS_LEDS |= led->mask;
+ else
+ *XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+ int i;
+
+ if (machine_is_ebsa285())
+ return -ENODEV;
+
+ /* 3 LEDS All ON */
+ *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+ for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+ struct ebsa285_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = ebsa285_leds[i].name;
+ led->cdev.brightness_set = ebsa285_led_set;
+ led->cdev.brightness_get = ebsa285_led_get;
+ led->cdev.default_trigger = ebsa285_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+#endif
+
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
.atag_offset = 0x100,
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index cac9f67e7da7..d2d14339c6c4 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -12,9 +12,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/system_misc.h>
@@ -27,13 +28,6 @@
#define GP1_IO_BASE 0x338
#define GP2_IO_BASE 0x33a
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS 0
-#else
-#define DEFAULT_LEDS GPIO_GREEN_LED
-#endif
-
/*
* Winbond WB83977F accessibility stuff
*/
@@ -611,15 +605,9 @@ static void __init rwa010_init(void)
static int __init nw_hw_init(void)
{
if (machine_is_netwinder()) {
- unsigned long flags;
-
wb977_init();
cpld_init();
rwa010_init();
-
- raw_spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
- raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
return 0;
}
@@ -672,6 +660,102 @@ static void netwinder_restart(char mode, const char *cmd)
}
}
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct netwinder_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} netwinder_leds[] = {
+ { "netwinder:green", "heartbeat", },
+ { "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+ nw_gpio_modify_op(led->mask, reg);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+ return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_netwinder())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+ struct netwinder_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = netwinder_leds[i].name;
+ led->cdev.brightness_set = netwinder_led_set;
+ led->cdev.brightness_get = netwinder_led_get;
+ led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = GPIO_GREEN_LED;
+ else
+ led->mask = GPIO_RED_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+#endif
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.atag_offset = 0x100,
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 5a2bd89cbdca..000000000000
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - On if the system is not idle
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_RAW_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = GPIO_GREEN_LED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= GPIO_GREEN_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_GREEN_LED;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- default:
- break;
- }
-
- raw_spin_unlock_irqrestore(&leds_lock, flags);
-
- if (led_state & LED_STATE_ENABLED) {
- raw_spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
- raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
- }
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_netwinder())
- leds_event = netwinder_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebeef966e1f5..5521d18bf19a 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,11 +4,10 @@
# Object file lists.
-obj-y := core.o lm.o
+obj-y := core.o lm.o leds.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index a432d4325f89..dad3cb74ed31 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -28,7 +28,6 @@
#include <mach/cm.h>
#include <mach/irqs.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
@@ -128,8 +127,6 @@ static struct amba_pl010_data integrator_uart_data = {
.set_mctrl = integrator_uart_set_mctrl,
};
-#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
static DEFINE_RAW_SPINLOCK(cm_lock);
/**
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 445d57adb043..1a78692e32a4 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,6 +3,8 @@
*/
void cm_control(u32, u32);
+#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
#define CM_CTRL_REMAP (1 << 2)
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 466defa97842..7a7f6d3273bf 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -1,90 +1,125 @@
/*
- * linux/arch/arm/mach-integrator/leds.c
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
*
- * Integrator/AP and Integrator/CP LED control routines
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
-static int saved_leds;
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
-static void integrator_leds_event(led_event_t ledevt)
+struct integrator_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} integrator_leds[] = {
+ { "integrator:green0", "heartbeat", },
+ { "integrator:yellow", },
+ { "integrator:red", },
+ { "integrator:green1", },
+ { "integrator:core_module", "cpu0", },
+};
+
+static void integrator_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
- const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
- unsigned int update_alpha_leds;
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- // yup, change the LEDs
- local_irq_save(flags);
- update_alpha_leds = 0;
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
- switch(ledevt) {
- case led_idle_start:
- cm_control(CM_CTRL_LED, 0);
- break;
+ while (__raw_readl(ALPHA_REG) & 1)
+ cpu_relax();
- case led_idle_end:
- cm_control(CM_CTRL_LED, CM_CTRL_LED);
- break;
+ __raw_writel(reg, LEDREG);
+}
- case led_timer:
- saved_leds ^= GREEN_LED;
- update_alpha_leds = 1;
- break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- case led_red_on:
- saved_leds |= RED_LED;
- update_alpha_leds = 1;
- break;
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
- case led_red_off:
- saved_leds &= ~RED_LED;
- update_alpha_leds = 1;
- break;
+static void cm_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ if (b != LED_OFF)
+ cm_control(CM_CTRL_LED, CM_CTRL_LED);
+ else
+ cm_control(CM_CTRL_LED, 0);
+}
- default:
- break;
- }
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+ u32 reg = readl(CM_CTRL);
- if (update_alpha_leds) {
- while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
- __raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
- }
- local_irq_restore(flags);
+ return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
{
- if (machine_is_integrator() || machine_is_cintegrator())
- leds_event = integrator_leds_event;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+ struct integrator_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+
+ led->cdev.name = integrator_leds[i].name;
+
+ if (i == 4) { /* Setting for LED in core module */
+ led->cdev.brightness_set = cm_led_set;
+ led->cdev.brightness_get = cm_led_get;
+ } else {
+ led->cdev.brightness_set = integrator_led_set;
+ led->cdev.brightness_get = integrator_led_get;
+ }
+
+ led->cdev.default_trigger = integrator_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
return 0;
}
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
+#endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 853efd9133c6..9324ef965c26 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,9 +11,6 @@ obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
-# LEDs
-obj-$(CONFIG_LEDS) += leds.o
-
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 73bd63812878..47399bc3c024 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -182,27 +182,6 @@ static void __init ks8695_add_device_watchdog(void)
}
-/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- gpio_direction_output(cpu_led, 1);
- gpio_direction_output(timer_led, 1);
-
- ks8695_leds_cpu = cpu_led;
- ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
/* -------------------------------------------------------------------- */
/*
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 85a3c9aa7d13..1e6594a0f297 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
/* PCI */
#define KS8695_MODE_PCI 0
#define KS8695_MODE_MINIPCI 1
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 4bd707547293..000000000000
--- a/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
- gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
- gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
- unsigned long is_off = gpio_get_value(led);
- if (is_off)
- ks8695_led_on(led);
- else
- ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- ks8695_led_toggle(ks8695_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
- return -ENODEV;
-
- leds_event = ks8695_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 398e9e53e189..cd169c386161 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -61,14 +61,6 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index af283a2bc7c7..376f7f29ef77 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -32,6 +32,7 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -307,12 +308,39 @@ static struct platform_device h2_irda_device = {
.resource = h2_irda_resources,
};
+static struct gpio_led h2_gpio_led_pins[] = {
+ {
+ .name = "h2:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h2:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+ .leds = h2_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h2_gpio_led_data,
+ },
+};
+
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
+ &h2_gpio_leds,
};
static void __init h2_init_smc91x(void)
@@ -407,6 +435,10 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
h2_smc91x_resources[1].start = gpio_to_irq(0);
h2_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 06d11b1ee9c6..ededdb7ef28c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -32,6 +32,7 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -325,6 +326,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
},
};
+static struct gpio_led h3_gpio_led_pins[] = {
+ {
+ .name = "h3:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h3:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+ .leds = h3_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h3_gpio_led_data,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@@ -332,6 +359,7 @@ static struct platform_device *devices[] __initdata = {
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
+ &h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
@@ -399,6 +427,10 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
smc91x_resources[1].start = gpio_to_irq(40);
smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 2f1f9b967576..5973945a8741 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -382,10 +382,37 @@ static struct platform_device osk5912_lcd_device = {
.id = -1,
};
+static struct gpio_led mistral_gpio_led_pins[] = {
+ {
+ .name = "mistral:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "mistral:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+ .leds = mistral_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mistral_gpio_led_data,
+ },
+};
+
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
&mistral_bl_device,
&osk5912_lcd_device,
+ &mistral_gpio_leds,
};
static int mistral_get_pendown_state(void)
@@ -510,6 +537,12 @@ static void __init osk_mistral_init(void)
if (gpio_request(2, "lcd_pwr") == 0)
gpio_direction_output(2, 1);
+ /*
+ * GPIO based LEDs
+ */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
i2c_register_board_info(1, mistral_i2c_board_info,
ARRAY_SIZE(mistral_i2c_board_info));
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index 6f958aec9459..000000000000
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- static struct h2p2_dbg_fpga __iomem *fpga;
- static u16 led_state, hw_led_state;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- switch (evt) {
- case led_start:
- if (!fpga)
- fpga = ioremap(H2P2_DBG_FPGA_START,
- H2P2_DBG_FPGA_SIZE);
- if (fpga) {
- led_state |= LED_STATE_ENABLED;
- __raw_writew(~0, &fpga->leds);
- }
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (! machine_is_omap_perseus2()) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- led_state &= ~LED_STATE_ENABLED;
- if (fpga) {
- __raw_writew(~0, &fpga->leds);
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
- }
- }
-
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (machine_is_omap_perseus2())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED && fpga)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 3a066ee8d02c..000000000000
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= 0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= 0;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~0;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 936ed426b84f..000000000000
--- a/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED (1 << 0)
-#define LED_STATE_CLAIMED (1 << 1)
-static u8 led_state;
-
-#define TIMER_LED (1 << 3) /* Mistral board */
-#define IDLE_LED (1 << 4) /* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context. This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
- int red = 0;
- int green = 0;
-
- if (hw_led_state & TIMER_LED)
- red = 1;
- else if (hw_led_state & IDLE_LED)
- green = 1;
- /* else both sides are disabled */
-
- gpio_set_value(GPIO_LED_GREEN, green);
- gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
- unsigned long flags;
- u16 leds;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- leds = hw_led_state;
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_halted:
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
- case led_timer:
- hw_led_state ^= TIMER_LED;
- mistral_setled();
- break;
-
- case led_idle_start: /* idle == off */
- hw_led_state &= ~IDLE_LED;
- mistral_setled();
- break;
-
- case led_idle_end:
- hw_led_state |= IDLE_LED;
- mistral_setled();
- break;
-
-#endif /* CONFIG_OMAP_OSK_MISTRAL */
-
- default:
- break;
- }
-
- leds ^= hw_led_state;
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index 4071479f7106..000000000000
--- a/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
- if (!cpu_class_is_omap1())
- return -ENODEV;
-
- if (machine_is_omap_innovator())
- leds_event = innovator_leds_event;
-
- else if (machine_is_omap_h2()
- || machine_is_omap_h3()
- || machine_is_omap_perseus2())
- leds_event = h2p2_dbg_leds_event;
-
- else if (machine_is_omap_osk())
- leds_event = osk_leds_event;
-
- else
- return -1;
-
- if (machine_is_omap_h2()
- || machine_is_omap_h3()
-#ifdef CONFIG_OMAP_OSK_MISTRAL
- || machine_is_omap_osk()
-#endif
- ) {
-
- /* LED1/LED2 pins can be used as GPIO (as done here), or by
- * the LPG (works even in deep sleep!), to drive a bicolor
- * LED on the H2 sample board, and another on the H2/P2
- * "surfer" expansion board.
- *
- * The same pins drive a LED on the OSK Mistral board, but
- * that's a different kind of LED (just one color at a time).
- */
- omap_cfg_reg(P18_1610_GPIO3);
- if (gpio_request(3, "LED red") == 0)
- gpio_direction_output(3, 1);
- else
- printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
- omap_cfg_reg(MPUIO4);
- if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
- gpio_direction_output(OMAP_MPUIO(4), 1);
- else
- printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
- }
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fedc376c..000000000000
--- a/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4062480bfec7..4d4816fd6fc9 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -44,7 +44,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index eae49c3980c9..74529549130c 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,7 +46,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index edc30b8b77ed..a6219eaf1f68 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -48,6 +48,7 @@ config ARCH_OMAP3
select ARM_CPU_SUSPEND if PM
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
+ select OMAP_INTERCONNECT
config ARCH_OMAP4
bool "TI OMAP4"
@@ -67,6 +68,7 @@ config ARCH_OMAP4
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+ select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 845202358ddc..7d6abda3b74e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -180,11 +180,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
-# L3 interconnect
-obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
-obj-$(CONFIG_SOC_OMAP5) += omap_l3_noc.o
-
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 78a6a11d8216..9b1c95310291 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -18,7 +18,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 2f5dc54cd4cd..51ba2b81a10b 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 399130fac0b6..0a56b9444f1b 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -19,8 +19,8 @@
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -53,12 +53,6 @@
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED 0
-
/*****************************************************************************
* 16M NOR Flash on Device bus CS1
****************************************************************************/
@@ -83,55 +77,32 @@ static struct platform_device rd88f5182_nor_flash = {
.resource = &rd88f5182_nor_flash_resource,
};
-#ifdef CONFIG_LEDS
-
/*****************************************************************************
- * Use GPIO debug led as CPU active indication
+ * Use GPIO LED as CPU active indication
****************************************************************************/
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
- int val;
-
- if (evt == led_idle_end)
- val = 1;
- else if (evt == led_idle_start)
- val = 0;
- else
- return;
-
- gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
- int pin;
-
- if (machine_is_rd88f5182()) {
- pin = RD88F5182_GPIO_DBG_LED;
+#define RD88F5182_GPIO_LED 0
- if (gpio_request(pin, "DBGLED") == 0) {
- if (gpio_direction_output(pin, 0) != 0) {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to set output pin %d\n", pin);
- gpio_free(pin);
- return 0;
- }
- } else {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to request gpio %d\n", pin);
- return 0;
- }
-
- leds_event = rd88f5182_dbgled_event;
- }
-
- return 0;
-}
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+ {
+ .name = "rd88f5182:cpu",
+ .default_trigger = "cpu0",
+ .gpio = RD88F5182_GPIO_LED,
+ },
+};
-__initcall(rd88f5182_dbgled_init);
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+ .leds = rd88f5182_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
-#endif
+static struct platform_device rd88f5182_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rd88f5182_gpio_led_data,
+ },
+};
/*****************************************************************************
* PCI
@@ -298,6 +269,7 @@ static void __init rd88f5182_init(void)
orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
+ platform_device_register(&rd88f5182_gpio_leds);
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
}
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 92df49c1b62a..ed50910b08a4 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -20,7 +20,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 2bedc9ed076c..ee88d6eae648 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -98,12 +98,4 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 6ff466bd43e8..ae1e9977603e 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -191,6 +191,87 @@ static void __init idp_map_io(void)
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct idp_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} idp_leds[] = {
+ { "idp:green", "heartbeat", },
+ { "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+ u32 reg = IDP_CPLD_LED_CONTROL;
+
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+
+ IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+
+ return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_pxa_idp())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+ struct idp_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = idp_leds[i].name;
+ led->cdev.brightness_set = idp_led_set;
+ led->cdev.brightness_get = idp_led_get;
+ led->cdev.default_trigger = idp_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = IDP_HB_LED;
+ else
+ led->mask = IDP_BUSY_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
+#endif
MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
/* Maintainer: Vibren Technologies */
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 06b060025d11..000000000000
--- a/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= IDP_HB_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= IDP_BUSY_LED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_HB_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_HB_LED;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_BUSY_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
- else
- IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index 0bd85c884a7c..000000000000
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision. Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
- else
- LUB_DISC_BLNK_LED |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index 4058ab340fe6..000000000000
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author: Nicolas Pitre
- * Created: Nov 05, 2002
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
- else
- MST_LEDCTRL |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f6afaa..000000000000
--- a/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
- if (machine_is_lubbock())
- leds_event = lubbock_leds_event;
- if (machine_is_mainstone())
- leds_event = mainstone_leds_event;
- if (machine_is_pxa_idp())
- leds_event = idp_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe01345a..000000000000
--- a/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0ca0db787903..3c48035afd6b 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/major.h>
@@ -23,6 +24,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -549,6 +552,98 @@ static void __init lubbock_map_io(void)
PCFR |= PCFR_OPDE;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct lubbock_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} lubbock_leds[] = {
+ { "lubbock:D28", "default-on", },
+ { "lubbock:D27", "cpu0", },
+ { "lubbock:D26", "heartbeat" },
+ { "lubbock:D25", },
+ { "lubbock:D24", },
+ { "lubbock:D23", },
+ { "lubbock:D22", },
+ { "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_lubbock())
+ return -ENODEV;
+
+ /* All ON */
+ LUB_DISC_BLNK_LED |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+ struct lubbock_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = lubbock_leds[i].name;
+ led->cdev.brightness_set = lubbock_led_set;
+ led->cdev.brightness_get = lubbock_led_get;
+ led->cdev.default_trigger = lubbock_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+#endif
+
MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 1aebaf719462..bdc6c335830a 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -28,6 +28,8 @@
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -613,6 +615,98 @@ static void __init mainstone_map_io(void)
PCFR = 0x66;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct mainstone_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} mainstone_leds[] = {
+ { "mainstone:D28", "default-on", },
+ { "mainstone:D27", "cpu0", },
+ { "mainstone:D26", "heartbeat" },
+ { "mainstone:D25", },
+ { "mainstone:D24", },
+ { "mainstone:D23", },
+ { "mainstone:D22", },
+ { "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_mainstone())
+ return -ENODEV;
+
+ /* All ON */
+ MST_LEDCTRL |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+ struct mainstone_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = mainstone_leds[i].name;
+ led->cdev.brightness_set = mainstone_led_set;
+ led->cdev.brightness_get = mainstone_led_get;
+ led->cdev.default_trigger = mainstone_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+#endif
+
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.atag_offset = 0x100, /* BLOB boot parameter setting */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index ff007d15e0ec..682467480588 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -34,7 +34,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
@@ -330,44 +329,6 @@ struct clcd_board clcd_plat_data = {
.remove = versatile_clcd_remove_dma,
};
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-
-void realview_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 val;
- u32 led = 1 << smp_processor_id();
-
- local_irq_save(flags);
- val = readl(VA_LEDS_BASE);
-
- switch (ledevt) {
- case led_idle_start:
- val = val & ~led;
- break;
-
- case led_idle_end:
- val = val | led;
- break;
-
- case led_timer:
- val = val ^ REALVIEW_SYS_LED7;
- break;
-
- case led_halted:
- val = 0;
- break;
-
- default:
- break;
- }
-
- writel(val, VA_LEDS_BASE);
- local_irq_restore(flags);
-}
-#endif /* CONFIG_LEDS */
-
/*
* Where is the timer (VA)?
*/
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index f8f2c0ac4c01..f2141ae5a7de 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <asm/setup.h>
-#include <asm/leds.h>
#define APB_DEVICE(name, busid, base, plat) \
static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
@@ -47,7 +46,6 @@ extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
extern void __iomem *timer3_va_base;
-extern void realview_leds_event(led_event_t ledevt);
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index ce7747692c8b..d3b3cd216d64 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,7 +31,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -463,10 +462,6 @@ static void __init realview_eb_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e21711d72ee2..07d6672ddae7 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -33,7 +33,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -376,10 +375,6 @@ static void __init realview_pb1176_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b442fb276d57..ec4fcd9a7e9c 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,7 +31,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -358,10 +357,6 @@ static void __init realview_pb11mp_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 1435cd863965..9992431b8a15 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -30,7 +30,6 @@
#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -300,10 +299,6 @@ static void __init realview_pba8_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 5d2c8bebb069..17954a327e1b 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -29,7 +29,6 @@
#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/smp_twd.h>
#include <asm/pgtable.h>
@@ -395,10 +394,6 @@ static void __init realview_pbx_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 60b97ec01676..1aed9e70465d 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -7,21 +7,17 @@ obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
-led-y := leds.o
obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o
obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
-led-$(CONFIG_SA1100_ASSABET) += leds-assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
obj-$(CONFIG_SA1100_BADGE4) += badge4.o
-led-$(CONFIG_SA1100_BADGE4) += leds-badge4.o
obj-$(CONFIG_SA1100_CERF) += cerf.o
-led-$(CONFIG_SA1100_CERF) += leds-cerf.o
obj-$(CONFIG_SA1100_COLLIE) += collie.o
@@ -29,13 +25,11 @@ obj-$(CONFIG_SA1100_H3100) += h3100.o h3xxx.o
obj-$(CONFIG_SA1100_H3600) += h3600.o h3xxx.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
-led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o
obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o
obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o
obj-$(CONFIG_SA1100_LART) += lart.o
-led-$(CONFIG_SA1100_LART) += leds-lart.o
obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o
obj-$(CONFIG_PCI_NANOENGINE) += pci-nanoengine.o
@@ -46,9 +40,6 @@ obj-$(CONFIG_SA1100_SHANNON) += shannon.o
obj-$(CONFIG_SA1100_SIMPAD) += simpad.o
-# LEDs support
-obj-$(CONFIG_LEDS) += $(led-y)
-
# Miscellaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_SA1100_SSP) += ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d673211f121c..1710ed1a0ac0 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/mm.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
#include <video/sa1100fb.h>
@@ -529,6 +531,89 @@ static void __init assabet_map_io(void)
sa1100_register_uart(2, 3);
}
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct assabet_led {
+ struct led_classdev cdev;
+ u32 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} assabet_leds[] = {
+ { "assabet:red", "cpu0",},
+ { "assabet:green", "heartbeat", },
+};
+
+/*
+ * The LED control in Assabet is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void assabet_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ if (b != LED_OFF)
+ ASSABET_BCR_clear(led->mask);
+ else
+ ASSABET_BCR_set(led->mask);
+}
+
+static enum led_brightness assabet_led_get(struct led_classdev *cdev)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ return (ASSABET_BCR & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init assabet_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_assabet())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(assabet_leds); i++) {
+ struct assabet_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = assabet_leds[i].name;
+ led->cdev.brightness_set = assabet_led_set;
+ led->cdev.brightness_get = assabet_led_get;
+ led->cdev.default_trigger = assabet_leds[i].trigger;
+
+ if (!i)
+ led->mask = ASSABET_BCR_LED_RED;
+ else
+ led->mask = ASSABET_BCR_LED_GREEN;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(assabet_leds_init);
+#endif
MACHINE_START(ASSABET, "Intel-Assabet")
.atag_offset = 0x100,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b30fb99b587c..038df4894b0f 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -76,8 +78,36 @@ static struct platform_device sa1111_device = {
.resource = sa1111_resources,
};
+/* LEDs */
+struct gpio_led badge4_gpio_leds[] = {
+ {
+ .name = "badge4:red",
+ .default_trigger = "heartbeat",
+ .gpio = 7,
+ },
+ {
+ .name = "badge4:green",
+ .default_trigger = "cpu0",
+ .gpio = 9,
+ },
+};
+
+static struct gpio_led_platform_data badge4_gpio_led_info = {
+ .leds = badge4_gpio_leds,
+ .num_leds = ARRAY_SIZE(badge4_gpio_leds),
+};
+
+static struct platform_device badge4_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &badge4_gpio_led_info,
+ }
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
+ &badge4_leds,
};
static int __init badge4_sa1111_init(void)
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 09d7f4b4b354..5240f104a3cd 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -17,6 +17,8 @@
#include <linux/irq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -43,8 +45,48 @@ static struct platform_device cerfuart2_device = {
.resource = cerfuart2_resources,
};
+/* LEDs */
+struct gpio_led cerf_gpio_leds[] = {
+ {
+ .name = "cerf:d0",
+ .default_trigger = "heartbeat",
+ .gpio = 0,
+ },
+ {
+ .name = "cerf:d1",
+ .default_trigger = "cpu0",
+ .gpio = 1,
+ },
+ {
+ .name = "cerf:d2",
+ .default_trigger = "default-on",
+ .gpio = 2,
+ },
+ {
+ .name = "cerf:d3",
+ .default_trigger = "default-on",
+ .gpio = 3,
+ },
+
+};
+
+static struct gpio_led_platform_data cerf_gpio_led_info = {
+ .leds = cerf_gpio_leds,
+ .num_leds = ARRAY_SIZE(cerf_gpio_leds),
+};
+
+static struct platform_device cerf_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cerf_gpio_led_info,
+ }
+};
+
+
static struct platform_device *cerf_devices[] __initdata = {
&cerfuart2_device,
+ &cerf_leds,
};
#ifdef CONFIG_SA1100_CERF_FLASH_32MB
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 7f86bd911826..fc106aab7c7e 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -21,6 +21,10 @@
#include <linux/serial_core.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -183,9 +187,37 @@ static struct flash_platform_data hackkit_flash_data = {
static struct resource hackkit_flash_resource =
DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
+/* LEDs */
+struct gpio_led hackkit_gpio_leds[] = {
+ {
+ .name = "hackkit:red",
+ .default_trigger = "cpu0",
+ .gpio = 22,
+ },
+ {
+ .name = "hackkit:green",
+ .default_trigger = "heartbeat",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data hackkit_gpio_led_info = {
+ .leds = hackkit_gpio_leds,
+ .num_leds = ARRAY_SIZE(hackkit_gpio_leds),
+};
+
+static struct platform_device hackkit_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &hackkit_gpio_led_info,
+ }
+};
+
static void __init hackkit_init(void)
{
sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
+ platform_device_register(&hackkit_leds);
}
/**********************************************************************
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index b775a0abec0a..b2ce04bf4c9b 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -5,6 +5,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <video/sa1100fb.h>
@@ -126,6 +129,27 @@ static struct map_desc lart_io_desc[] __initdata = {
}
};
+/* LEDs */
+struct gpio_led lart_gpio_leds[] = {
+ {
+ .name = "lart:red",
+ .default_trigger = "cpu0",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data lart_gpio_led_info = {
+ .leds = lart_gpio_leds,
+ .num_leds = ARRAY_SIZE(lart_gpio_leds),
+};
+
+static struct platform_device lart_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &lart_gpio_led_info,
+ }
+};
static void __init lart_map_io(void)
{
sa1100_map_io();
@@ -139,6 +163,8 @@ static void __init lart_map_io(void)
GPDR |= GPIO_UART_TXD;
GPDR &= ~GPIO_UART_RXD;
PPAR |= PPAR_UPR;
+
+ platform_device_register(&lart_leds);
}
MACHINE_START(LART, "LART")
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
deleted file mode 100644
index 3699176bca94..000000000000
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-assabet.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Assabet uses the LEDs as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - on if system is not idle
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/assabet.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define ASSABET_BCR_LED_MASK (ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED)
-
-void assabet_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= ASSABET_BCR_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_GREEN;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
deleted file mode 100644
index f99fac3eedb6..000000000000
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-badge4.c
- *
- * Author: Christopher Hoover <ch@hpl.hp.com>
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_RED GPIO_GPIO(7)
-#define LED_GREEN GPIO_GPIO(9)
-#define LED_MASK (LED_RED|LED_GREEN)
-
-#define LED_IDLE LED_GREEN
-#define LED_TIMER LED_RED
-
-void badge4_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_TIMER;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* LED off when system is idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_IDLE;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_IDLE;
- break;
-#endif
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
deleted file mode 100644
index 30fc3b2bf555..000000000000
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-cerf.c
- *
- * Author: ???
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_D0 GPIO_GPIO(0)
-#define LED_D1 GPIO_GPIO(1)
-#define LED_D2 GPIO_GPIO(2)
-#define LED_D3 GPIO_GPIO(3)
-#define LED_MASK (LED_D0|LED_D1|LED_D2|LED_D3)
-
-void cerf_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_D0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-#endif
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D2;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D2;
- break;
-
- case led_amber_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D3;
- break;
-
- case led_amber_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D3;
- break;
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index f8e47235babe..000000000000
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN GPIO_GPIO23
-#define LED_RED GPIO_GPIO22
-#define LED_MASK (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 22/23 are outputs */
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
deleted file mode 100644
index 50a5b143b460..000000000000
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- *
- * LART uses the LED as follows:
- * - GPIO23 is the LED, on if system is not idle
- * You can use both CONFIG_LEDS_CPU and CONFIG_LEDS_TIMER at the same
- * time, but in that case the timer events will still dictate the
- * pace of the LED.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_23 GPIO_GPIO23
-#define LED_MASK (LED_23)
-
-void lart_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 23 is output pin */
- GPDR |= LED_23;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_23;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_23;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_23;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_23;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_23;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c
deleted file mode 100644
index 5fe71a0f1053..000000000000
--- a/arch/arm/mach-sa1100/leds.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds.c
- *
- * SA1100 LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-sa1100_leds_init(void)
-{
- if (machine_is_assabet())
- leds_event = assabet_leds_event;
- if (machine_is_consus())
- leds_event = consus_leds_event;
- if (machine_is_badge4())
- leds_event = badge4_leds_event;
- if (machine_is_brutus())
- leds_event = brutus_leds_event;
- if (machine_is_cerf())
- leds_event = cerf_leds_event;
- if (machine_is_flexanet())
- leds_event = flexanet_leds_event;
- if (machine_is_graphicsclient())
- leds_event = graphicsclient_leds_event;
- if (machine_is_hackkit())
- leds_event = hackkit_leds_event;
- if (machine_is_lart())
- leds_event = lart_leds_event;
- if (machine_is_pfs168())
- leds_event = pfs168_leds_event;
- if (machine_is_graphicsmaster())
- leds_event = graphicsmaster_leds_event;
- if (machine_is_adsbitsy())
- leds_event = adsbitsy_leds_event;
- if (machine_is_pt_system3())
- leds_event = system3_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(sa1100_leds_init);
diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h
deleted file mode 100644
index 776b6020f550..000000000000
--- a/arch/arm/mach-sa1100/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void assabet_leds_event(led_event_t evt);
-extern void badge4_leds_event(led_event_t evt);
-extern void consus_leds_event(led_event_t evt);
-extern void brutus_leds_event(led_event_t evt);
-extern void cerf_leds_event(led_event_t evt);
-extern void flexanet_leds_event(led_event_t evt);
-extern void graphicsclient_leds_event(led_event_t evt);
-extern void hackkit_leds_event(led_event_t evt);
-extern void lart_leds_event(led_event_t evt);
-extern void pfs168_leds_event(led_event_t evt);
-extern void graphicsmaster_leds_event(led_event_t evt);
-extern void adsbitsy_leds_event(led_event_t evt);
-extern void system3_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
index 45be9b04e7ba..29657183c452 100644
--- a/arch/arm/mach-shark/Makefile
+++ b/arch/arm/mach-shark/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o dma.o irq.o pci.o
+obj-y := core.o dma.o irq.o pci.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index d35b94ef73b7..9ad2e9737fb5 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -13,7 +13,6 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/param.h>
#include <asm/system_misc.h>
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 25609076921f..081c778a10ac 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -1,165 +1,117 @@
/*
- * arch/arm/mach-shark/leds.c
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/leds-footbridge.c
- * Copyright (C) 1998-1999 Russell King
- *
* DIGITAL Shark LED control routines.
*
- * The leds use is as follows:
- * - Green front - toggles state every 50 timer interrupts
- * - Amber front - Unused, this is a dual color led (Amber/Green)
- * - Amber back - On if system is not idle
+ * Driver for the 3 user LEDs found on the Shark
+ * Based on Versatile and RealView machine LED code
*
- * Changelog:
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <asm/leds.h>
+#include <asm/mach-types.h>
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct shark_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} shark_leds[] = {
+ { "shark:amber0", "default-on", }, /* Bit 5 */
+ { "shark:green", "heartbeat", }, /* Bit 6 */
+ { "shark:amber1", "cpu0" }, /* Bit 7 */
+};
+
+static u16 led_reg_read(void)
+{
+ outw(0x09, 0x24);
+ return inw(0x26);
+}
-static char led_state;
-static short hw_led_state;
-static short saved_state;
+static void led_reg_write(u16 value)
+{
+ outw(0x09, 0x24);
+ outw(value, 0x26);
+}
-static DEFINE_RAW_SPINLOCK(leds_lock);
+static void shark_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
-short sequoia_read(int addr) {
- outw(addr,0x24);
- return inw(0x26);
-}
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
-void sequoia_write(short value,short addr) {
- outw(addr,0x24);
- outw(value,0x26);
+ led_reg_write(reg);
}
-static void sequoia_leds_event(led_event_t evt)
+static enum led_brightness shark_led_get(struct led_classdev *cdev)
{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&leds_lock, flags);
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
- hw_led_state = sequoia_read(0x09);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
- switch (evt) {
- case led_start:
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
-#ifdef CONFIG_LEDS_CPU
- hw_led_state |= SEQUOIA_LED_BACK;
-#else
- hw_led_state &= ~SEQUOIA_LED_BACK;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- saved_state = hw_led_state;
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = saved_state;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= SEQUOIA_LED_GREEN;
- break;
-#endif
+static int __init shark_leds_init(void)
+{
+ int i;
+ u16 reg;
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
+ if (!machine_is_shark())
+ return -ENODEV;
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-#endif
+ for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
+ struct shark_led *led;
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
-
- default:
- break;
- }
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
- if (led_state & LED_STATE_ENABLED)
- sequoia_write(hw_led_state,0x09);
+ led->cdev.name = shark_leds[i].name;
+ led->cdev.brightness_set = shark_led_set;
+ led->cdev.brightness_get = shark_led_get;
+ led->cdev.default_trigger = shark_leds[i].trigger;
- raw_spin_unlock_irqrestore(&leds_lock, flags);
-}
+ /* Count in 5 bits offset */
+ led->mask = BIT(i + 5);
-static int __init leds_init(void)
-{
- extern void (*leds_event)(led_event_t);
- short temp;
-
- leds_event = sequoia_leds_event;
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
/* Make LEDs independent of power-state */
- request_region(0x24,4,"sequoia");
- temp = sequoia_read(0x09);
- temp |= 1<<10;
- sequoia_write(temp,0x09);
- leds_event(led_start);
+ request_region(0x24, 4, "led_reg");
+ reg = led_reg_read();
+ reg |= 1 << 10;
+ led_reg_write(reg);
+
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(shark_leds_init);
+#endif
diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
index c8a7b951f759..cc9b5fd8c3d3 100644
--- a/arch/arm/mach-tegra/tegra20_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
@@ -917,14 +917,10 @@ PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX
PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 92000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */
PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
-PERIPH_CLK(i2c1, "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(i2c2, "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(i2c3, "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(dvc, "tegra-i2c.3", NULL, 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(i2c1_i2c, "tegra-i2c.0", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
-PERIPH_CLK(i2c2_i2c, "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
-PERIPH_CLK(i2c3_i2c, "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
-PERIPH_CLK(dvc_i2c, "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
+PERIPH_CLK(i2c1, "tegra-i2c.0", "div-clk", 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(i2c2, "tegra-i2c.1", "div-clk", 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(i2c3, "tegra-i2c.2", "div-clk", 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(dvc, "tegra-i2c.3", "div-clk", 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
@@ -989,10 +985,6 @@ static struct clk *tegra_list_clks[] = {
&tegra_i2c2,
&tegra_i2c3,
&tegra_dvc,
- &tegra_i2c1_i2c,
- &tegra_i2c2_i2c,
- &tegra_i2c3_i2c,
- &tegra_dvc_i2c,
&tegra_uarta,
&tegra_uartb,
&tegra_uartc,
@@ -1056,6 +1048,10 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("vde", "tegra-aes", "vde"),
CLK_DUPLICATE("cclk", NULL, "cpu"),
CLK_DUPLICATE("twd", "smp_twd", NULL),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
};
#define CLK(dev, con, ck) \
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index c10449603df0..d92cb556ae35 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1071,11 +1071,11 @@ PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX
PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 127000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */
PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); /* scales with voltage */
-PERIPH_CLK(i2c1, "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c2, "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c3, "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c4, "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c5, "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c1, "tegra-i2c.0", "div-clk", 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c2, "tegra-i2c.1", "div-clk", 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c3, "tegra-i2c.2", "div-clk", 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c4, "tegra-i2c.3", "div-clk", 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c5, "tegra-i2c.4", "div-clk", 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
@@ -1287,6 +1287,11 @@ struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("dam1", NULL, "dam1"),
CLK_DUPLICATE("dam2", NULL, "dam2"),
CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"),
};
struct clk *tegra_ptr_clks[] = {
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index ca7902c6ed18..5b5c1eeb5b5c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -37,7 +37,6 @@
#include <linux/mtd/physmap.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <asm/hardware/vic.h>
@@ -758,10 +757,6 @@ void __init versatile_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = versatile_leds_event;
-#endif
}
/*
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index d15a4a6d6146..ca83a7659aef 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -42,9 +42,8 @@ config OMAP_DEBUG_DEVICES
For debug cards on TI reference boards.
config OMAP_DEBUG_LEDS
- bool
+ def_bool y if NEW_LEDS
depends on OMAP_DEBUG_DEVICES
- default y if LEDS_CLASS
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 195aaae65872..ea29bbe8e5cf 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -1,280 +1,119 @@
/*
* linux/arch/arm/plat-omap/debug-leds.c
*
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
* Copyright 2003 by Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/gpio.h>
+
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t lock;
-static struct h2p2_dbg_fpga __iomem *fpga;
-static u16 led_state, hw_led_state;
-
-
-#ifdef CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api() 1
-#else
-#define new_led_api() 0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- * - timer and idle leds (some boards use non-FPGA leds here);
- * - up to 4 generic leds, easily accessed in-kernel (any context)
*/
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&lock, flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- switch (evt) {
- case led_start:
- if (fpga)
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER,
- led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- /* LED lit iff busy */
- case led_idle_start:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
+static struct h2p2_dbg_fpga __iomem *fpga;
- case led_idle_end:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- * - with syfs access and generic triggering
- * - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
struct dbg_led {
struct led_classdev cdev;
u16 mask;
};
-static struct dbg_led dbg_leds[] = {
- /* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
- { .mask = 1 << 0, .cdev.name = "d4:green",
- .cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
- { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
-#endif
- { .mask = 1 << 2, .cdev.name = "d6:green", },
- { .mask = 1 << 3, .cdev.name = "d7:green", },
-
- { .mask = 1 << 4, .cdev.name = "d8:green", },
- { .mask = 1 << 5, .cdev.name = "d9:green", },
- { .mask = 1 << 6, .cdev.name = "d10:green", },
- { .mask = 1 << 7, .cdev.name = "d11:green", },
-
- { .mask = 1 << 8, .cdev.name = "d12:green", },
- { .mask = 1 << 9, .cdev.name = "d13:green", },
- { .mask = 1 << 10, .cdev.name = "d14:green", },
- { .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef CONFIG_LEDS
- { .mask = 1 << 12, .cdev.name = "d16:green", },
- { .mask = 1 << 13, .cdev.name = "d17:green", },
- { .mask = 1 << 14, .cdev.name = "d18:green", },
- { .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+ const char *name;
+ const char *trigger;
+} dbg_leds[] = {
+ { "dbg:d4", "heartbeat", },
+ { "dbg:d5", "cpu0", },
+ { "dbg:d6", "default-on", },
+ { "dbg:d7", },
+ { "dbg:d8", },
+ { "dbg:d9", },
+ { "dbg:d10", },
+ { "dbg:d11", },
+ { "dbg:d12", },
+ { "dbg:d13", },
+ { "dbg:d14", },
+ { "dbg:d15", },
+ { "dbg:d16", },
+ { "dbg:d17", },
+ { "dbg:d18", },
+ { "dbg:d19", },
};
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
- unsigned long flags;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- spin_lock_irqsave(&lock, flags);
- if (value == LED_OFF)
- hw_led_state &= ~led->mask;
+ reg = __raw_readw(&fpga->leds);
+ if (b != LED_OFF)
+ reg |= led->mask;
else
- hw_led_state |= led->mask;
- __raw_writew(~hw_led_state, &fpga->leds);
- spin_unlock_irqrestore(&lock, flags);
+ reg &= ~led->mask;
+ __raw_writew(reg, &fpga->leds);
}
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
{
- unsigned i;
- struct dbg_led *led;
- int status;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
- led->cdev.brightness_set = fpga_led_set;
- status = led_classdev_register(dev, &led->cdev);
- if (status < 0)
- break;
- }
- return;
+ reg = __raw_readw(&fpga->leds);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
}
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
{
struct resource *iomem;
-
- spin_lock_init(&lock);
+ int i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem)
return -ENODEV;
fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
- __raw_writew(~0, &fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
+ for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+ struct dbg_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
-#ifdef CONFIG_LEDS
- leds_event = h2p2_dbg_leds_event;
- leds_event(led_start);
-#endif
+ led->cdev.name = dbg_leds[i].name;
+ led->cdev.brightness_set = dbg_led_set;
+ led->cdev.brightness_get = dbg_led_get;
+ led->cdev.default_trigger = dbg_leds[i].trigger;
+ led->mask = BIT(i);
- if (new_led_api()) {
- newled_init(&pdev->dev);
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
}
return 0;
@@ -282,13 +121,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
static int fpga_suspend_noirq(struct device *dev)
{
- __raw_writew(~0, &fpga->leds);
+ fpga_led_state = __raw_readw(&fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
return 0;
}
static int fpga_resume_noirq(struct device *dev)
{
- __raw_writew(~hw_led_state, &fpga->leds);
+ __raw_writew(~fpga_led_state, &fpga->leds);
return 0;
}
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 4dcb11c3d894..60552e22f22e 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -28,7 +28,6 @@
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 8d5c10a5084d..2a4ae8a6a081 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -16,8 +16,10 @@ config PLAT_VERSATILE_FPGA_IRQ_NR
depends on PLAT_VERSATILE_FPGA_IRQ
config PLAT_VERSATILE_LEDS
- def_bool y if LEDS_CLASS
+ def_bool y if NEW_LEDS
depends on ARCH_REALVIEW || ARCH_VERSATILE
+ select LEDS_CLASS
+ select LEDS_TRIGGER
config PLAT_VERSATILE_SCHED_CLOCK
def_bool y
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
index 3169fa555ea6..d2490d00b46c 100644
--- a/arch/arm/plat-versatile/leds.c
+++ b/arch/arm/plat-versatile/leds.c
@@ -37,10 +37,10 @@ static const struct {
} versatile_leds[] = {
{ "versatile:0", "heartbeat", },
{ "versatile:1", "mmc0", },
- { "versatile:2", },
- { "versatile:3", },
- { "versatile:4", },
- { "versatile:5", },
+ { "versatile:2", "cpu0" },
+ { "versatile:3", "cpu1" },
+ { "versatile:4", "cpu2" },
+ { "versatile:5", "cpu3" },
{ "versatile:6", },
{ "versatile:7", },
};
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 36d3daa19a74..dbdefa3fe775 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -2,6 +2,8 @@ menu "Device Drivers"
source "drivers/base/Kconfig"
+source "drivers/bus/Kconfig"
+
source "drivers/connector/Kconfig"
source "drivers/mtd/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 8c30e73cd94c..acb48fa4531c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -6,6 +6,7 @@
#
obj-y += irqchip/
+obj-y += bus/
# GPIO must come after pinctrl as gpios may need to mux pins etc
obj-y += pinctrl/
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
new file mode 100644
index 000000000000..bbec35d21fe5
--- /dev/null
+++ b/drivers/bus/Kconfig
@@ -0,0 +1,21 @@
+#
+# Bus Devices
+#
+
+menu "Bus devices"
+
+config OMAP_OCP2SCP
+ tristate "OMAP OCP2SCP DRIVER"
+ help
+ Driver to enable ocp2scp module which transforms ocp interface
+ protocol to scp protocol. In OMAP4, USB PHY is connected via
+ OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
+ OCP2SCP.
+
+config OMAP_INTERCONNECT
+ tristate "OMAP INTERCONNECT DRIVER"
+ depends on ARCH_OMAP2PLUS
+
+ help
+ Driver to enable OMAP interconnect error handling driver.
+endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
new file mode 100644
index 000000000000..45d997c85453
--- /dev/null
+++ b/drivers/bus/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the bus drivers.
+#
+
+obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
+
+# Interconnect bus driver for OMAP SoCs.
+obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
new file mode 100644
index 000000000000..ff63560b8467
--- /dev/null
+++ b/drivers/bus/omap-ocp2scp.c
@@ -0,0 +1,88 @@
+/*
+ * omap-ocp2scp.c - transform ocp interface protocol to scp protocol
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+static int ocp2scp_remove_devices(struct device *dev, void *c)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ platform_device_unregister(pdev);
+
+ return 0;
+}
+
+static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device_node *np = pdev->dev.of_node;
+
+ if (np) {
+ ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+ goto err0;
+ }
+ }
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+err0:
+ device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+ return ret;
+}
+
+static int __devexit omap_ocp2scp_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+ device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ocp2scp_id_table[] = {
+ { .compatible = "ti,omap-ocp2scp" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
+#endif
+
+static struct platform_driver omap_ocp2scp_driver = {
+ .probe = omap_ocp2scp_probe,
+ .remove = __devexit_p(omap_ocp2scp_remove),
+ .driver = {
+ .name = "omap-ocp2scp",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(omap_ocp2scp_id_table),
+ },
+};
+
+module_platform_driver(omap_ocp2scp_driver);
+
+MODULE_ALIAS("platform: omap-ocp2scp");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP OCP2SCP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index f447e02102bb..44b2b3e57882 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -191,7 +191,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- 9 + OMAP44XX_IRQ_GIC_START);
+ l3->debug_irq);
goto err3;
}
@@ -201,7 +201,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- 10 + OMAP44XX_IRQ_GIC_START);
+ l3->app_irq);
goto err4;
}
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index a6ce34dc4814..a6ce34dc4814 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c
index acc216491b8a..acc216491b8a 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/drivers/bus/omap_l3_smx.c
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/drivers/bus/omap_l3_smx.h
index 4f3cebca4179..4f3cebca4179 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ b/drivers/bus/omap_l3_smx.h
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index d45c3345b4af..a0e2f7d70355 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -30,7 +30,6 @@
#include <asm/hardware/dec21285.h>
#include <asm/io.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/uaccess.h>
@@ -179,9 +178,6 @@ static ssize_t flash_write(struct file *file, const char __user *buf,
written = 0;
- leds_event(led_claim);
- leds_event(led_green_on);
-
nBlock = (int) p >> 16; //block # of 64K bytes
/*
@@ -258,11 +254,6 @@ static ssize_t flash_write(struct file *file, const char __user *buf,
printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
}
- /*
- * restore reg on exit
- */
- leds_event(led_release);
-
mutex_unlock(&nwflash_mutex);
return written;
@@ -334,11 +325,6 @@ static int erase_block(int nBlock)
int temp, temp1;
/*
- * orange LED == erase
- */
- leds_event(led_amber_on);
-
- /*
* reset footbridge to the correct offset 0 (...0..3)
*/
*CSR_ROMWRITEREG = 0;
@@ -446,12 +432,6 @@ static int write_block(unsigned long p, const char __user *buf, int count)
unsigned long timeout;
unsigned long timeout1;
- /*
- * red LED == write
- */
- leds_event(led_amber_off);
- leds_event(led_red_on);
-
pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
/*
@@ -558,17 +538,9 @@ static int write_block(unsigned long p, const char __user *buf, int count)
pWritePtr - FLASH_BASE);
/*
- * no LED == waiting
- */
- leds_event(led_amber_off);
- /*
* wait couple ms
*/
msleep(10);
- /*
- * red LED == write
- */
- leds_event(led_red_on);
goto WriteRetry;
} else {
@@ -583,12 +555,6 @@ static int write_block(unsigned long p, const char __user *buf, int count)
}
}
- /*
- * green LED == read/verify
- */
- leds_event(led_amber_off);
- leds_event(led_green_on);
-
msleep(10);
pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 8af4b06e80f7..a006f0db15af 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2797,6 +2797,27 @@ static __init void exynos4_gpiolib_init(void)
int group = 0;
void __iomem *gpx_base;
+#ifdef CONFIG_PINCTRL_SAMSUNG
+ /*
+ * This gpio driver includes support for device tree support and
+ * there are platforms using it. In order to maintain
+ * compatibility with those platforms, and to allow non-dt
+ * Exynos4210 platforms to use this gpiolib support, a check
+ * is added to find out if there is a active pin-controller
+ * driver support available. If it is available, this gpiolib
+ * support is ignored and the gpiolib support available in
+ * pin-controller driver is used. This is a temporary check and
+ * will go away when all of the Exynos4210 platforms have
+ * switched to using device tree and the pin-ctrl driver.
+ */
+ struct device_node *pctrl_np;
+ const char *pctrl_compat = "samsung,pinctrl-exynos4210";
+ pctrl_np = of_find_compatible_node(NULL, NULL, pctrl_compat);
+ if (pctrl_np)
+ if (of_device_is_available(pctrl_np))
+ return;
+#endif
+
/* gpio part1 */
gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
if (gpio_base1 == NULL) {
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9a08c57bc936..f981ac4e6783 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/i2c-tegra.h>
#include <linux/of_i2c.h>
+#include <linux/of_device.h>
#include <linux/module.h>
#include <asm/unaligned.h>
@@ -114,11 +115,21 @@ enum msg_end_type {
};
/**
+ * struct tegra_i2c_hw_feature : Different HW support on Tegra
+ * @has_continue_xfer_support: Continue transfer supports.
+ */
+
+struct tegra_i2c_hw_feature {
+ bool has_continue_xfer_support;
+};
+
+/**
* struct tegra_i2c_dev - per device i2c context
* @dev: device reference for power management
+ * @hw: Tegra i2c hw feature.
* @adapter: core i2c layer adapter information
- * @clk: clock reference for i2c controller
- * @i2c_clk: clock reference for i2c bus
+ * @div_clk: clock reference for div clock of i2c controller.
+ * @fast_clk: clock reference for fast clock of i2c controller.
* @base: ioremapped registers cookie
* @cont_id: i2c controller id, used for for packet header
* @irq: irq number of transfer complete interrupt
@@ -133,9 +144,10 @@ enum msg_end_type {
*/
struct tegra_i2c_dev {
struct device *dev;
+ const struct tegra_i2c_hw_feature *hw;
struct i2c_adapter adapter;
- struct clk *clk;
- struct clk *i2c_clk;
+ struct clk *div_clk;
+ struct clk *fast_clk;
void __iomem *base;
int cont_id;
int irq;
@@ -351,16 +363,40 @@ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
}
+static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
+{
+ int ret;
+ ret = clk_prepare_enable(i2c_dev->fast_clk);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev,
+ "Enabling fast clk failed, err %d\n", ret);
+ return ret;
+ }
+ ret = clk_prepare_enable(i2c_dev->div_clk);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev,
+ "Enabling div clk failed, err %d\n", ret);
+ clk_disable_unprepare(i2c_dev->fast_clk);
+ }
+ return ret;
+}
+
+static inline void tegra_i2c_clock_disable(struct tegra_i2c_dev *i2c_dev)
+{
+ clk_disable_unprepare(i2c_dev->div_clk);
+ clk_disable_unprepare(i2c_dev->fast_clk);
+}
+
static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
{
u32 val;
int err = 0;
- clk_prepare_enable(i2c_dev->clk);
+ tegra_i2c_clock_enable(i2c_dev);
- tegra_periph_reset_assert(i2c_dev->clk);
+ tegra_periph_reset_assert(i2c_dev->div_clk);
udelay(2);
- tegra_periph_reset_deassert(i2c_dev->clk);
+ tegra_periph_reset_deassert(i2c_dev->div_clk);
if (i2c_dev->is_dvc)
tegra_dvc_init(i2c_dev);
@@ -369,7 +405,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
(0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
i2c_writel(i2c_dev, val, I2C_CNFG);
i2c_writel(i2c_dev, 0, I2C_INT_MASK);
- clk_set_rate(i2c_dev->clk, i2c_dev->bus_clk_rate * 8);
+ clk_set_rate(i2c_dev->div_clk, i2c_dev->bus_clk_rate * 8);
if (!i2c_dev->is_dvc) {
u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
@@ -387,7 +423,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (tegra_i2c_flush_fifos(i2c_dev))
err = -ETIMEDOUT;
- clk_disable_unprepare(i2c_dev->clk);
+ tegra_i2c_clock_disable(i2c_dev);
if (i2c_dev->irq_disabled) {
i2c_dev->irq_disabled = 0;
@@ -563,7 +599,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
if (i2c_dev->is_suspended)
return -EBUSY;
- clk_prepare_enable(i2c_dev->clk);
+ tegra_i2c_clock_enable(i2c_dev);
for (i = 0; i < num; i++) {
enum msg_end_type end_type = MSG_END_STOP;
if (i < (num - 1)) {
@@ -576,14 +612,19 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
if (ret)
break;
}
- clk_disable_unprepare(i2c_dev->clk);
+ tegra_i2c_clock_disable(i2c_dev);
return ret ?: i;
}
static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
+ struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+ u32 ret = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_PROTOCOL_MANGLING;
+
+ if (i2c_dev->hw->has_continue_xfer_support)
+ ret |= I2C_FUNC_NOSTART;
+ return ret;
}
static const struct i2c_algorithm tegra_i2c_algo = {
@@ -591,13 +632,32 @@ static const struct i2c_algorithm tegra_i2c_algo = {
.functionality = tegra_i2c_func,
};
+static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
+ .has_continue_xfer_support = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
+ .has_continue_xfer_support = true,
+};
+
+#if defined(CONFIG_OF)
+/* Match table for of_platform binding */
+static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
+ { .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, },
+ { .compatible = "nvidia,tegra20-i2c", .data = &tegra20_i2c_hw, },
+ { .compatible = "nvidia,tegra20-i2c-dvc", .data = &tegra20_i2c_hw, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
+#endif
+
static int __devinit tegra_i2c_probe(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev;
struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
- struct clk *clk;
- struct clk *i2c_clk;
+ struct clk *div_clk;
+ struct clk *fast_clk;
const unsigned int *prop;
void __iomem *base;
int irq;
@@ -622,16 +682,16 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
}
irq = res->start;
- clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
+ div_clk = devm_clk_get(&pdev->dev, "div-clk");
+ if (IS_ERR(div_clk)) {
dev_err(&pdev->dev, "missing controller clock");
- return PTR_ERR(clk);
+ return PTR_ERR(div_clk);
}
- i2c_clk = devm_clk_get(&pdev->dev, "i2c");
- if (IS_ERR(i2c_clk)) {
+ fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
+ if (IS_ERR(fast_clk)) {
dev_err(&pdev->dev, "missing bus clock");
- return PTR_ERR(i2c_clk);
+ return PTR_ERR(fast_clk);
}
i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
@@ -641,8 +701,8 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
}
i2c_dev->base = base;
- i2c_dev->clk = clk;
- i2c_dev->i2c_clk = i2c_clk;
+ i2c_dev->div_clk = div_clk;
+ i2c_dev->fast_clk = fast_clk;
i2c_dev->adapter.algo = &tegra_i2c_algo;
i2c_dev->irq = irq;
i2c_dev->cont_id = pdev->id;
@@ -659,11 +719,18 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
i2c_dev->bus_clk_rate = be32_to_cpup(prop);
}
- if (pdev->dev.of_node)
+ i2c_dev->hw = &tegra20_i2c_hw;
+
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_device(of_match_ptr(tegra_i2c_of_match),
+ &pdev->dev);
+ i2c_dev->hw = match->data;
i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
"nvidia,tegra20-i2c-dvc");
- else if (pdev->id == 3)
+ } else if (pdev->id == 3) {
i2c_dev->is_dvc = 1;
+ }
init_completion(&i2c_dev->msg_complete);
platform_set_drvdata(pdev, i2c_dev);
@@ -681,8 +748,6 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
return ret;
}
- clk_prepare_enable(i2c_dev->i2c_clk);
-
i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
i2c_dev->adapter.owner = THIS_MODULE;
i2c_dev->adapter.class = I2C_CLASS_HWMON;
@@ -696,7 +761,6 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
if (ret) {
dev_err(&pdev->dev, "Failed to add I2C adapter\n");
- clk_disable_unprepare(i2c_dev->i2c_clk);
return ret;
}
@@ -751,16 +815,6 @@ static SIMPLE_DEV_PM_OPS(tegra_i2c_pm, tegra_i2c_suspend, tegra_i2c_resume);
#define TEGRA_I2C_PM NULL
#endif
-#if defined(CONFIG_OF)
-/* Match table for of_platform binding */
-static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
- { .compatible = "nvidia,tegra20-i2c", },
- { .compatible = "nvidia,tegra20-i2c-dvc", },
- {},
-};
-MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
-#endif
-
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
.remove = __devexit_p(tegra_i2c_remove),
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c96bbaadeebd..16578d3b52bb 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -506,6 +506,16 @@ config LEDS_TRIGGER_BACKLIGHT
If unsure, say N.
+config LEDS_TRIGGER_CPU
+ bool "LED CPU Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by active CPUs. This shows
+ the active CPUs across an array of LEDs so you can see which
+ CPUs are active on the system at any given moment.
+
+ If unsure, say N.
+
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
depends on LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index a4429a9217bc..a9b627c4f8ba 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -61,5 +61,6 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c
new file mode 100644
index 000000000000..b312056da14d
--- /dev/null
+++ b/drivers/leds/ledtrig-cpu.c
@@ -0,0 +1,163 @@
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * This LED trigger will be registered for each possible CPU and named as
+ * cpu0, cpu1, cpu2, cpu3, etc.
+ *
+ * It can be bound to any LED just like other triggers using either a
+ * board file or via sysfs interface.
+ *
+ * An API named ledtrig_cpu is exported for any user, who want to add CPU
+ * activity indication in their code
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 - 2012 Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include <linux/rwsem.h>
+#include "leds.h"
+
+#define MAX_NAME_LEN 8
+
+struct led_trigger_cpu {
+ char name[MAX_NAME_LEN];
+ struct led_trigger *_trig;
+ struct mutex lock;
+ int lock_is_inited;
+};
+
+static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
+
+/**
+ * ledtrig_cpu - emit a CPU event as a trigger
+ * @evt: CPU event to be emitted
+ *
+ * Emit a CPU event on a CPU core, which will trigger a
+ * binded LED to turn on or turn off.
+ */
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+ struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig);
+
+ /* mutex lock should be initialized before calling mutex_call() */
+ if (!trig->lock_is_inited)
+ return;
+
+ mutex_lock(&trig->lock);
+
+ /* Locate the correct CPU LED */
+ switch (ledevt) {
+ case CPU_LED_IDLE_END:
+ case CPU_LED_START:
+ /* Will turn the LED on, max brightness */
+ led_trigger_event(trig->_trig, LED_FULL);
+ break;
+
+ case CPU_LED_IDLE_START:
+ case CPU_LED_STOP:
+ case CPU_LED_HALTED:
+ /* Will turn the LED off */
+ led_trigger_event(trig->_trig, LED_OFF);
+ break;
+
+ default:
+ /* Will leave the LED as it is */
+ break;
+ }
+
+ mutex_unlock(&trig->lock);
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void)
+{
+ ledtrig_cpu(CPU_LED_STOP);
+ return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void)
+{
+ ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void)
+{
+ ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static struct syscore_ops ledtrig_cpu_syscore_ops = {
+ .shutdown = ledtrig_cpu_syscore_shutdown,
+ .suspend = ledtrig_cpu_syscore_suspend,
+ .resume = ledtrig_cpu_syscore_resume,
+};
+
+static int __init ledtrig_cpu_init(void)
+{
+ int cpu;
+
+ /* Supports up to 9999 cpu cores */
+ BUILD_BUG_ON(CONFIG_NR_CPUS > 9999);
+
+ /*
+ * Registering CPU led trigger for each CPU core here
+ * ignores CPU hotplug, but after this CPU hotplug works
+ * fine with this trigger.
+ */
+ for_each_possible_cpu(cpu) {
+ struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+ mutex_init(&trig->lock);
+
+ snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
+
+ mutex_lock(&trig->lock);
+ led_trigger_register_simple(trig->name, &trig->_trig);
+ trig->lock_is_inited = 1;
+ mutex_unlock(&trig->lock);
+ }
+
+ register_syscore_ops(&ledtrig_cpu_syscore_ops);
+
+ pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
+
+ return 0;
+}
+module_init(ledtrig_cpu_init);
+
+static void __exit ledtrig_cpu_exit(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+ mutex_lock(&trig->lock);
+
+ led_trigger_unregister_simple(trig->_trig);
+ trig->_trig = NULL;
+ memset(trig->name, 0, MAX_NAME_LEN);
+ trig->lock_is_inited = 0;
+
+ mutex_unlock(&trig->lock);
+ mutex_destroy(&trig->lock);
+ }
+
+ unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
+}
+module_exit(ledtrig_cpu_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_AUTHOR("Bryan Wu <bryan.wu@canonical.com>");
+MODULE_DESCRIPTION("CPU LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 8ca417614c57..598cd0a3adee 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -406,46 +406,6 @@ config MTD_NAND_ATMEL
help
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 and AVR32 processors.
-choice
- prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
- depends on MTD_NAND_ATMEL
-
-config MTD_NAND_ATMEL_ECC_HW
- bool "Hardware ECC"
- depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
- help
- Use hardware ECC instead of software ECC when the chip
- supports it.
-
- The hardware ECC controller is capable of single bit error
- correction and 2-bit random detection per page.
-
- NB : hardware and software ECC schemes are incompatible.
- If you switch from one to another, you'll have to erase your
- mtd partition.
-
- If unsure, say Y
-
-config MTD_NAND_ATMEL_ECC_SOFT
- bool "Software ECC"
- help
- Use software ECC.
-
- NB : hardware and software ECC schemes are incompatible.
- If you switch from one to another, you'll have to erase your
- mtd partition.
-
-config MTD_NAND_ATMEL_ECC_NONE
- bool "No ECC (testing only, DANGEROUS)"
- depends on DEBUG_KERNEL
- help
- No ECC will be used.
- It's not a good idea and it should be reserved for testing
- purpose only.
-
- If unsure, say N
-
-endchoice
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 54e3588bef62..34e94c7f68ca 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -145,6 +145,15 @@ config PINCTRL_COH901
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
ports of 8 GPIO pins each.
+config PINCTRL_SAMSUNG
+ bool "Samsung pinctrl driver"
+ select PINMUX
+ select PINCONF
+
+config PINCTRL_EXYNOS4
+ bool "Pinctrl driver data for Exynos4 SoC"
+ select PINCTRL_SAMSUNG
+
source "drivers/pinctrl/spear/Kconfig"
endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f40b1f81ff2c..6a88113e11d9 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -29,5 +29,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
+obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
+obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o
obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
new file mode 100644
index 000000000000..21362f48d370
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -0,0 +1,579 @@
+/*
+ * Exynos specific support for Samsung pinctrl/gpiolib driver with eint support.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file contains the Samsung Exynos specific information required by the
+ * the Samsung pinctrl/gpiolib driver. It also includes the implementation of
+ * external gpio and wakeup interrupt support.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/mach/irq.h>
+
+#include "pinctrl-samsung.h"
+#include "pinctrl-exynos.h"
+
+/* list of external wakeup controllers supported */
+static const struct of_device_id exynos_wkup_irq_ids[] = {
+ { .compatible = "samsung,exynos4210-wakeup-eint", },
+};
+
+static void exynos_gpio_irq_unmask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask &= ~(1 << edata->pin);
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_gpio_irq_mask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask |= 1 << edata->pin;
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_gpio_irq_ack(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset;
+
+ writel(1 << edata->pin, d->virt_base + reg_pend);
+}
+
+static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct samsung_pin_ctrl *ctrl = d->ctrl;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ struct samsung_pin_bank *bank = edata->bank;
+ unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin;
+ unsigned int con, trig_type;
+ unsigned long reg_con = ctrl->geint_con + edata->eint_offset;
+ unsigned int mask;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ trig_type = EXYNOS_EINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trig_type = EXYNOS_EINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trig_type = EXYNOS_EINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trig_type = EXYNOS_EINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trig_type = EXYNOS_EINT_LEVEL_LOW;
+ break;
+ default:
+ pr_err("unsupported external interrupt type\n");
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ __irq_set_handler_locked(irqd->irq, handle_edge_irq);
+ else
+ __irq_set_handler_locked(irqd->irq, handle_level_irq);
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(EXYNOS_EINT_CON_MASK << shift);
+ con |= trig_type << shift;
+ writel(con, d->virt_base + reg_con);
+
+ reg_con = bank->pctl_offset;
+ shift = edata->pin * bank->func_width;
+ mask = (1 << bank->func_width) - 1;
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(mask << shift);
+ con |= EXYNOS_EINT_FUNC << shift;
+ writel(con, d->virt_base + reg_con);
+
+ return 0;
+}
+
+/*
+ * irq_chip for gpio interrupts.
+ */
+static struct irq_chip exynos_gpio_irq_chip = {
+ .name = "exynos_gpio_irq_chip",
+ .irq_unmask = exynos_gpio_irq_unmask,
+ .irq_mask = exynos_gpio_irq_mask,
+ .irq_ack = exynos_gpio_irq_ack,
+ .irq_set_type = exynos_gpio_irq_set_type,
+};
+
+/*
+ * given a controller-local external gpio interrupt number, prepare the handler
+ * data for it.
+ */
+static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
+ struct samsung_pinctrl_drv_data *d)
+{
+ struct samsung_pin_bank *bank = d->ctrl->pin_banks;
+ struct exynos_geint_data *eint_data;
+ unsigned int nr_banks = d->ctrl->nr_banks, idx;
+ unsigned int irq_base = 0, eint_offset = 0;
+
+ if (hw >= d->ctrl->nr_gint) {
+ dev_err(d->dev, "unsupported ext-gpio interrupt\n");
+ return NULL;
+ }
+
+ for (idx = 0; idx < nr_banks; idx++, bank++) {
+ if (bank->eint_type != EINT_TYPE_GPIO)
+ continue;
+ if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins)))
+ break;
+ irq_base += bank->nr_pins;
+ eint_offset += 4;
+ }
+
+ if (idx == nr_banks) {
+ dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n");
+ return NULL;
+ }
+
+ eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL);
+ if (!eint_data) {
+ dev_err(d->dev, "no memory for eint-gpio data\n");
+ return NULL;
+ }
+
+ eint_data->bank = bank;
+ eint_data->pin = hw - irq_base;
+ eint_data->eint_offset = eint_offset;
+ return eint_data;
+}
+
+static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct samsung_pinctrl_drv_data *d = h->host_data;
+ struct exynos_geint_data *eint_data;
+
+ eint_data = exynos_get_eint_data(hw, d);
+ if (!eint_data)
+ return -EINVAL;
+
+ irq_set_handler_data(virq, eint_data);
+ irq_set_chip_data(virq, h->host_data);
+ irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
+ handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ return 0;
+}
+
+static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq)
+{
+ struct samsung_pinctrl_drv_data *d = h->host_data;
+ struct exynos_geint_data *eint_data;
+
+ eint_data = irq_get_handler_data(virq);
+ devm_kfree(d->dev, eint_data);
+}
+
+/*
+ * irq domain callbacks for external gpio interrupt controller.
+ */
+static const struct irq_domain_ops exynos_gpio_irqd_ops = {
+ .map = exynos_gpio_irq_map,
+ .unmap = exynos_gpio_irq_unmap,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
+{
+ struct samsung_pinctrl_drv_data *d = data;
+ struct samsung_pin_ctrl *ctrl = d->ctrl;
+ struct samsung_pin_bank *bank = ctrl->pin_banks;
+ unsigned int svc, group, pin, virq;
+
+ svc = readl(d->virt_base + ctrl->svc);
+ group = EXYNOS_SVC_GROUP(svc);
+ pin = svc & EXYNOS_SVC_NUM_MASK;
+
+ if (!group)
+ return IRQ_HANDLED;
+ bank += (group - 1);
+
+ virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin);
+ if (!virq)
+ return IRQ_NONE;
+ generic_handle_irq(virq);
+ return IRQ_HANDLED;
+}
+
+/*
+ * exynos_eint_gpio_init() - setup handling of external gpio interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
+{
+ struct device *dev = d->dev;
+ unsigned int ret;
+
+ if (!d->irq) {
+ dev_err(dev, "irq number not available\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq,
+ 0, dev_name(dev), d);
+ if (ret) {
+ dev_err(dev, "irq request failed\n");
+ return -ENXIO;
+ }
+
+ d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint,
+ &exynos_gpio_irqd_ops, d);
+ if (!d->gpio_irqd) {
+ dev_err(dev, "gpio irq domain allocation failed\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void exynos_wkup_irq_unmask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask &= ~(1 << pin);
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_wkup_irq_mask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask |= 1 << pin;
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_wkup_irq_ack(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long pend = d->ctrl->weint_pend + (bank << 2);
+
+ writel(1 << pin, d->virt_base + pend);
+}
+
+static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long reg_con = d->ctrl->weint_con + (bank << 2);
+ unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
+ unsigned long con, trig_type;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ trig_type = EXYNOS_EINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trig_type = EXYNOS_EINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trig_type = EXYNOS_EINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trig_type = EXYNOS_EINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trig_type = EXYNOS_EINT_LEVEL_LOW;
+ break;
+ default:
+ pr_err("unsupported external interrupt type\n");
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ __irq_set_handler_locked(irqd->irq, handle_edge_irq);
+ else
+ __irq_set_handler_locked(irqd->irq, handle_level_irq);
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(EXYNOS_EINT_CON_MASK << shift);
+ con |= trig_type << shift;
+ writel(con, d->virt_base + reg_con);
+ return 0;
+}
+
+/*
+ * irq_chip for wakeup interrupts
+ */
+static struct irq_chip exynos_wkup_irq_chip = {
+ .name = "exynos_wkup_irq_chip",
+ .irq_unmask = exynos_wkup_irq_unmask,
+ .irq_mask = exynos_wkup_irq_mask,
+ .irq_ack = exynos_wkup_irq_ack,
+ .irq_set_type = exynos_wkup_irq_set_type,
+};
+
+/* interrupt handler for wakeup interrupts 0..15 */
+static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ struct exynos_weint_data *eintd = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ int eint_irq;
+
+ chained_irq_enter(chip, desc);
+ chip->irq_mask(&desc->irq_data);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ eint_irq = irq_linear_revmap(eintd->domain, eintd->irq);
+ generic_handle_irq(eint_irq);
+ chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
+}
+
+static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
+ struct irq_domain *domain)
+{
+ unsigned int irq;
+
+ while (pend) {
+ irq = fls(pend) - 1;
+ generic_handle_irq(irq_find_mapping(domain, irq_base + irq));
+ pend &= ~(1 << irq);
+ }
+}
+
+/* interrupt handler for wakeup interrupt 16 */
+static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ struct exynos_weint_data *eintd = irq_get_handler_data(irq);
+ struct samsung_pinctrl_drv_data *d = eintd->domain->host_data;
+ unsigned long pend;
+ unsigned long mask;
+
+ chained_irq_enter(chip, desc);
+ pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8);
+ mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8);
+ exynos_irq_demux_eint(16, pend & ~mask, eintd->domain);
+ pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC);
+ mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC);
+ exynos_irq_demux_eint(24, pend & ~mask, eintd->domain);
+ chained_irq_exit(chip, desc);
+}
+
+static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip, handle_level_irq);
+ irq_set_chip_data(virq, h->host_data);
+ set_irq_flags(virq, IRQF_VALID);
+ return 0;
+}
+
+/*
+ * irq domain callbacks for external wakeup interrupt controller.
+ */
+static const struct irq_domain_ops exynos_wkup_irqd_ops = {
+ .map = exynos_wkup_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+/*
+ * exynos_eint_wkup_init() - setup handling of external wakeup interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
+{
+ struct device *dev = d->dev;
+ struct device_node *wkup_np = NULL;
+ struct device_node *np;
+ struct exynos_weint_data *weint_data;
+ int idx, irq;
+
+ for_each_child_of_node(dev->of_node, np) {
+ if (of_match_node(exynos_wkup_irq_ids, np)) {
+ wkup_np = np;
+ break;
+ }
+ }
+ if (!wkup_np)
+ return -ENODEV;
+
+ d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint,
+ &exynos_wkup_irqd_ops, d);
+ if (!d->wkup_irqd) {
+ dev_err(dev, "wakeup irq domain allocation failed\n");
+ return -ENXIO;
+ }
+
+ weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL);
+ if (!weint_data) {
+ dev_err(dev, "could not allocate memory for weint_data\n");
+ return -ENOMEM;
+ }
+
+ irq = irq_of_parse_and_map(wkup_np, 16);
+ if (irq) {
+ weint_data[16].domain = d->wkup_irqd;
+ irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
+ irq_set_handler_data(irq, &weint_data[16]);
+ } else {
+ dev_err(dev, "irq number for EINT16-32 not found\n");
+ }
+
+ for (idx = 0; idx < 16; idx++) {
+ weint_data[idx].domain = d->wkup_irqd;
+ weint_data[idx].irq = idx;
+
+ irq = irq_of_parse_and_map(wkup_np, idx);
+ if (irq) {
+ irq_set_handler_data(irq, &weint_data[idx]);
+ irq_set_chained_handler(irq, exynos_irq_eint0_15);
+ } else {
+ dev_err(dev, "irq number for eint-%x not found\n", idx);
+ }
+ }
+ return 0;
+}
+
+/* pin banks of exynos4210 pin-controller 0 */
+static struct samsung_pin_bank exynos4210_pin_banks0[] = {
+ EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"),
+ EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"),
+ EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"),
+ EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"),
+ EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"),
+ EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"),
+ EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"),
+ EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"),
+ EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"),
+ EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"),
+ EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"),
+ EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"),
+ EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"),
+ EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"),
+ EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"),
+ EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"),
+};
+
+/* pin banks of exynos4210 pin-controller 1 */
+static struct samsung_pin_bank exynos4210_pin_banks1[] = {
+ EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"),
+ EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"),
+ EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"),
+ EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"),
+ EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"),
+ EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"),
+ EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"),
+ EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"),
+ EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"),
+ EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"),
+ EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"),
+ EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"),
+ EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"),
+ EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"),
+ EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"),
+ EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"),
+ EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"),
+ EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"),
+ EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"),
+ EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"),
+};
+
+/* pin banks of exynos4210 pin-controller 2 */
+static struct samsung_pin_bank exynos4210_pin_banks2[] = {
+ EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
+ * three gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 data */
+ .pin_banks = exynos4210_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
+ .base = EXYNOS4210_GPIO_A0_START,
+ .nr_pins = EXYNOS4210_GPIOA_NR_PINS,
+ .nr_gint = EXYNOS4210_GPIOA_NR_GINT,
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos4210-gpio-ctrl0",
+ }, {
+ /* pin-controller instance 1 data */
+ .pin_banks = exynos4210_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
+ .base = EXYNOS4210_GPIOA_NR_PINS,
+ .nr_pins = EXYNOS4210_GPIOB_NR_PINS,
+ .nr_gint = EXYNOS4210_GPIOB_NR_GINT,
+ .nr_wint = 32,
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .weint_con = EXYNOS_WKUP_ECON_OFFSET,
+ .weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
+ .weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .label = "exynos4210-gpio-ctrl1",
+ }, {
+ /* pin-controller instance 2 data */
+ .pin_banks = exynos4210_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
+ .base = EXYNOS4210_GPIOA_NR_PINS +
+ EXYNOS4210_GPIOB_NR_PINS,
+ .nr_pins = EXYNOS4210_GPIOC_NR_PINS,
+ .label = "exynos4210-gpio-ctrl2",
+ },
+};
diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h
new file mode 100644
index 000000000000..31d0a06174e4
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-exynos.h
@@ -0,0 +1,218 @@
+/*
+ * Exynos specific definitions for Samsung pinctrl and gpiolib driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * This file contains the Exynos specific definitions for the Samsung
+ * pinctrl/gpiolib interface drivers.
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR))
+
+#define EXYNOS4210_GPIO_A0_NR (8)
+#define EXYNOS4210_GPIO_A1_NR (6)
+#define EXYNOS4210_GPIO_B_NR (8)
+#define EXYNOS4210_GPIO_C0_NR (5)
+#define EXYNOS4210_GPIO_C1_NR (5)
+#define EXYNOS4210_GPIO_D0_NR (4)
+#define EXYNOS4210_GPIO_D1_NR (4)
+#define EXYNOS4210_GPIO_E0_NR (5)
+#define EXYNOS4210_GPIO_E1_NR (8)
+#define EXYNOS4210_GPIO_E2_NR (6)
+#define EXYNOS4210_GPIO_E3_NR (8)
+#define EXYNOS4210_GPIO_E4_NR (8)
+#define EXYNOS4210_GPIO_F0_NR (8)
+#define EXYNOS4210_GPIO_F1_NR (8)
+#define EXYNOS4210_GPIO_F2_NR (8)
+#define EXYNOS4210_GPIO_F3_NR (6)
+#define EXYNOS4210_GPIO_J0_NR (8)
+#define EXYNOS4210_GPIO_J1_NR (5)
+#define EXYNOS4210_GPIO_K0_NR (7)
+#define EXYNOS4210_GPIO_K1_NR (7)
+#define EXYNOS4210_GPIO_K2_NR (7)
+#define EXYNOS4210_GPIO_K3_NR (7)
+#define EXYNOS4210_GPIO_L0_NR (8)
+#define EXYNOS4210_GPIO_L1_NR (3)
+#define EXYNOS4210_GPIO_L2_NR (8)
+#define EXYNOS4210_GPIO_Y0_NR (6)
+#define EXYNOS4210_GPIO_Y1_NR (4)
+#define EXYNOS4210_GPIO_Y2_NR (6)
+#define EXYNOS4210_GPIO_Y3_NR (8)
+#define EXYNOS4210_GPIO_Y4_NR (8)
+#define EXYNOS4210_GPIO_Y5_NR (8)
+#define EXYNOS4210_GPIO_Y6_NR (8)
+#define EXYNOS4210_GPIO_X0_NR (8)
+#define EXYNOS4210_GPIO_X1_NR (8)
+#define EXYNOS4210_GPIO_X2_NR (8)
+#define EXYNOS4210_GPIO_X3_NR (8)
+#define EXYNOS4210_GPIO_Z_NR (7)
+
+enum exynos4210_gpio_xa_start {
+ EXYNOS4210_GPIO_A0_START = 0,
+ EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
+ EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
+ EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
+ EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
+ EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
+ EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
+ EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
+ EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
+ EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
+ EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
+ EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
+ EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
+ EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
+ EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
+ EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
+};
+
+enum exynos4210_gpio_xb_start {
+ EXYNOS4210_GPIO_J0_START = 0,
+ EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
+ EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
+ EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
+ EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
+ EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
+ EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
+ EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
+ EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
+ EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
+ EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
+ EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
+ EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
+ EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
+ EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
+ EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
+ EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
+ EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
+ EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
+ EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
+};
+
+enum exynos4210_gpio_xc_start {
+ EXYNOS4210_GPIO_Z_START = 0,
+};
+
+#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START
+#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START
+#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START
+#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START
+#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START
+#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START
+#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START
+#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START
+#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START
+#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START
+#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START
+#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START
+#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START
+#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START
+#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START
+#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START
+#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START
+#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START
+#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START
+#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START
+#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START
+#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START
+#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START
+#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START
+#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START
+#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START
+
+#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
+#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
+#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
+#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
+#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
+
+/* External GPIO and wakeup interrupt related definitions */
+#define EXYNOS_GPIO_ECON_OFFSET 0x700
+#define EXYNOS_GPIO_EMASK_OFFSET 0x900
+#define EXYNOS_GPIO_EPEND_OFFSET 0xA00
+#define EXYNOS_WKUP_ECON_OFFSET 0xE00
+#define EXYNOS_WKUP_EMASK_OFFSET 0xF00
+#define EXYNOS_WKUP_EPEND_OFFSET 0xF40
+#define EXYNOS_SVC_OFFSET 0xB08
+#define EXYNOS_EINT_FUNC 0xF
+
+/* helpers to access interrupt service register */
+#define EXYNOS_SVC_GROUP_SHIFT 3
+#define EXYNOS_SVC_GROUP_MASK 0x1f
+#define EXYNOS_SVC_NUM_MASK 7
+#define EXYNOS_SVC_GROUP(x) ((x >> EXYNOS_SVC_GROUP_SHIFT) & \
+ EXYNOS_SVC_GROUP_MASK)
+
+/* Exynos specific external interrupt trigger types */
+#define EXYNOS_EINT_LEVEL_LOW 0
+#define EXYNOS_EINT_LEVEL_HIGH 1
+#define EXYNOS_EINT_EDGE_FALLING 2
+#define EXYNOS_EINT_EDGE_RISING 3
+#define EXYNOS_EINT_EDGE_BOTH 4
+#define EXYNOS_EINT_CON_MASK 0xF
+#define EXYNOS_EINT_CON_LEN 4
+
+#define EXYNOS_EINT_MAX_PER_BANK 8
+#define EXYNOS_EINT_NR_WKUP_EINT
+
+#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \
+ { \
+ .pctl_offset = reg, \
+ .pin_base = (__gpio##_START), \
+ .nr_pins = (__gpio##_NR), \
+ .func_width = 4, \
+ .pud_width = 2, \
+ .drv_width = 2, \
+ .conpdn_width = 2, \
+ .pudpdn_width = 2, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \
+ { \
+ .pctl_offset = reg, \
+ .pin_base = (__gpio##_START), \
+ .nr_pins = (__gpio##_NR), \
+ .func_width = 4, \
+ .pud_width = 2, \
+ .drv_width = 2, \
+ .conpdn_width = 2, \
+ .pudpdn_width = 2, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .irq_base = (__gpio##_IRQ), \
+ .name = id \
+ }
+
+/**
+ * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks.
+ * @bank: pin bank from which this gpio interrupt originates.
+ * @pin: pin number within the bank.
+ * @eint_offset: offset to be added to the con/pend/mask register bank base.
+ */
+struct exynos_geint_data {
+ struct samsung_pin_bank *bank;
+ u32 pin;
+ u32 eint_offset;
+};
+
+/**
+ * struct exynos_weint_data: irq specific data for all the wakeup interrupts
+ * generated by the external wakeup interrupt controller.
+ * @domain: irq domain representing the external wakeup interrupts
+ * @irq: interrupt number within the domain.
+ */
+struct exynos_weint_data {
+ struct irq_domain *domain;
+ u32 irq;
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
new file mode 100644
index 000000000000..dd108a94acf9
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -0,0 +1,888 @@
+/*
+ * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver implements the Samsung pinctrl driver. It supports setting up of
+ * pinmux and pinconf configurations. The gpiolib interface is also included.
+ * External interrupt (gpio and wakeup) support are not included in this driver
+ * but provides extensions to which platform specific implementation of the gpio
+ * and wakeup interrupts can be hooked to.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include "core.h"
+#include "pinctrl-samsung.h"
+
+#define GROUP_SUFFIX "-grp"
+#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
+#define FUNCTION_SUFFIX "-mux"
+#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
+
+/* list of all possible config options supported */
+struct pin_config {
+ char *prop_cfg;
+ unsigned int cfg_type;
+} pcfgs[] = {
+ { "samsung,pin-pud", PINCFG_TYPE_PUD },
+ { "samsung,pin-drv", PINCFG_TYPE_DRV },
+ { "samsung,pin-con-pdn", PINCFG_TYPE_CON_PDN },
+ { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
+};
+
+/* check if the selector is a valid pin group selector */
+static int samsung_get_group_count(struct pinctrl_dev *pctldev)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->nr_groups;
+}
+
+/* return the name of the group selected by the group selector */
+static const char *samsung_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->pin_groups[selector].name;
+}
+
+/* return the pin numbers associated with the specified group */
+static int samsung_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector, const unsigned **pins, unsigned *num_pins)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ *pins = drvdata->pin_groups[selector].pins;
+ *num_pins = drvdata->pin_groups[selector].num_pins;
+ return 0;
+}
+
+/* create pinctrl_map entries by parsing device tree nodes */
+static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np, struct pinctrl_map **maps,
+ unsigned *nmaps)
+{
+ struct device *dev = pctldev->dev;
+ struct pinctrl_map *map;
+ unsigned long *cfg = NULL;
+ char *gname, *fname;
+ int cfg_cnt = 0, map_cnt = 0, idx = 0;
+
+ /* count the number of config options specfied in the node */
+ for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
+ if (of_find_property(np, pcfgs[idx].prop_cfg, NULL))
+ cfg_cnt++;
+ }
+
+ /*
+ * Find out the number of map entries to create. All the config options
+ * can be accomadated into a single config map entry.
+ */
+ if (cfg_cnt)
+ map_cnt = 1;
+ if (of_find_property(np, "samsung,pin-function", NULL))
+ map_cnt++;
+ if (!map_cnt) {
+ dev_err(dev, "node %s does not have either config or function "
+ "configurations\n", np->name);
+ return -EINVAL;
+ }
+
+ /* Allocate memory for pin-map entries */
+ map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL);
+ if (!map) {
+ dev_err(dev, "could not alloc memory for pin-maps\n");
+ return -ENOMEM;
+ }
+ *nmaps = 0;
+
+ /*
+ * Allocate memory for pin group name. The pin group name is derived
+ * from the node name from which these map entries are be created.
+ */
+ gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
+ if (!gname) {
+ dev_err(dev, "failed to alloc memory for group name\n");
+ goto free_map;
+ }
+ sprintf(gname, "%s%s", np->name, GROUP_SUFFIX);
+
+ /*
+ * don't have config options? then skip over to creating function
+ * map entries.
+ */
+ if (!cfg_cnt)
+ goto skip_cfgs;
+
+ /* Allocate memory for config entries */
+ cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL);
+ if (!cfg) {
+ dev_err(dev, "failed to alloc memory for configs\n");
+ goto free_gname;
+ }
+
+ /* Prepare a list of config settings */
+ for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
+ u32 value;
+ if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value))
+ cfg[cfg_cnt++] =
+ PINCFG_PACK(pcfgs[idx].cfg_type, value);
+ }
+
+ /* create the config map entry */
+ map[*nmaps].data.configs.group_or_pin = gname;
+ map[*nmaps].data.configs.configs = cfg;
+ map[*nmaps].data.configs.num_configs = cfg_cnt;
+ map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+ *nmaps += 1;
+
+skip_cfgs:
+ /* create the function map entry */
+ if (of_find_property(np, "samsung,pin-function", NULL)) {
+ fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
+ if (!fname) {
+ dev_err(dev, "failed to alloc memory for func name\n");
+ goto free_cfg;
+ }
+ sprintf(fname, "%s%s", np->name, FUNCTION_SUFFIX);
+
+ map[*nmaps].data.mux.group = gname;
+ map[*nmaps].data.mux.function = fname;
+ map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
+ *nmaps += 1;
+ }
+
+ *maps = map;
+ return 0;
+
+free_cfg:
+ kfree(cfg);
+free_gname:
+ kfree(gname);
+free_map:
+ kfree(map);
+ return -ENOMEM;
+}
+
+/* free the memory allocated to hold the pin-map table */
+static void samsung_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ int idx;
+
+ for (idx = 0; idx < num_maps; idx++) {
+ if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) {
+ kfree(map[idx].data.mux.function);
+ if (!idx)
+ kfree(map[idx].data.mux.group);
+ } else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) {
+ kfree(map[idx].data.configs.configs);
+ if (!idx)
+ kfree(map[idx].data.configs.group_or_pin);
+ }
+ };
+
+ kfree(map);
+}
+
+/* list of pinctrl callbacks for the pinctrl core */
+static struct pinctrl_ops samsung_pctrl_ops = {
+ .get_groups_count = samsung_get_group_count,
+ .get_group_name = samsung_get_group_name,
+ .get_group_pins = samsung_get_group_pins,
+ .dt_node_to_map = samsung_dt_node_to_map,
+ .dt_free_map = samsung_dt_free_map,
+};
+
+/* check if the selector is a valid pin function selector */
+static int samsung_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->nr_functions;
+}
+
+/* return the name of the pin function specified */
+static const char *samsung_pinmux_get_fname(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->pmx_functions[selector].name;
+}
+
+/* return the groups associated for the specified function selector */
+static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector, const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ *groups = drvdata->pmx_functions[selector].groups;
+ *num_groups = drvdata->pmx_functions[selector].num_groups;
+ return 0;
+}
+
+/*
+ * given a pin number that is local to a pin controller, find out the pin bank
+ * and the register base of the pin bank.
+ */
+static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin,
+ void __iomem **reg, u32 *offset,
+ struct samsung_pin_bank **bank)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct samsung_pin_bank *b;
+
+ drvdata = dev_get_drvdata(gc->dev);
+ b = drvdata->ctrl->pin_banks;
+
+ while ((pin >= b->pin_base) &&
+ ((b->pin_base + b->nr_pins - 1) < pin))
+ b++;
+
+ *reg = drvdata->virt_base + b->pctl_offset;
+ *offset = pin - b->pin_base;
+ if (bank)
+ *bank = b;
+
+ /* some banks have two config registers in a single bank */
+ if (*offset * b->func_width > BITS_PER_LONG)
+ *reg += 4;
+}
+
+/* enable or disable a pinmux function */
+static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group, bool enable)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ const unsigned int *pins;
+ struct samsung_pin_bank *bank;
+ void __iomem *reg;
+ u32 mask, shift, data, pin_offset, cnt;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pins = drvdata->pin_groups[group].pins;
+
+ /*
+ * for each pin in the pin group selected, program the correspoding pin
+ * pin function number in the config register.
+ */
+ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) {
+ pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base,
+ &reg, &pin_offset, &bank);
+ mask = (1 << bank->func_width) - 1;
+ shift = pin_offset * bank->func_width;
+
+ data = readl(reg);
+ data &= ~(mask << shift);
+ if (enable)
+ data |= drvdata->pin_groups[group].func << shift;
+ writel(data, reg);
+ }
+}
+
+/* enable a specified pinmux by writing to registers */
+static int samsung_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group)
+{
+ samsung_pinmux_setup(pctldev, selector, group, true);
+ return 0;
+}
+
+/* disable a specified pinmux by writing to registers */
+static void samsung_pinmux_disable(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ samsung_pinmux_setup(pctldev, selector, group, false);
+}
+
+/*
+ * The calls to gpio_direction_output() and gpio_direction_input()
+ * leads to this function call (via the pinctrl_gpio_direction_{input|output}()
+ * function called from the gpiolib interface).
+ */
+static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned offset, bool input)
+{
+ struct samsung_pin_bank *bank;
+ void __iomem *reg;
+ u32 data, pin_offset, mask, shift;
+
+ pin_to_reg_bank(range->gc, offset, &reg, &pin_offset, &bank);
+ mask = (1 << bank->func_width) - 1;
+ shift = pin_offset * bank->func_width;
+
+ data = readl(reg);
+ data &= ~(mask << shift);
+ if (!input)
+ data |= FUNC_OUTPUT << shift;
+ writel(data, reg);
+ return 0;
+}
+
+/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
+static struct pinmux_ops samsung_pinmux_ops = {
+ .get_functions_count = samsung_get_functions_count,
+ .get_function_name = samsung_pinmux_get_fname,
+ .get_function_groups = samsung_pinmux_get_groups,
+ .enable = samsung_pinmux_enable,
+ .disable = samsung_pinmux_disable,
+ .gpio_set_direction = samsung_pinmux_gpio_set_direction,
+};
+
+/* set or get the pin config settings for a specified pin */
+static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config, bool set)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct samsung_pin_bank *bank;
+ void __iomem *reg_base;
+ enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
+ u32 data, width, pin_offset, mask, shift;
+ u32 cfg_value, cfg_reg;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, &reg_base,
+ &pin_offset, &bank);
+
+ switch (cfg_type) {
+ case PINCFG_TYPE_PUD:
+ width = bank->pud_width;
+ cfg_reg = PUD_REG;
+ break;
+ case PINCFG_TYPE_DRV:
+ width = bank->drv_width;
+ cfg_reg = DRV_REG;
+ break;
+ case PINCFG_TYPE_CON_PDN:
+ width = bank->conpdn_width;
+ cfg_reg = CONPDN_REG;
+ break;
+ case PINCFG_TYPE_PUD_PDN:
+ width = bank->pudpdn_width;
+ cfg_reg = PUDPDN_REG;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ mask = (1 << width) - 1;
+ shift = pin_offset * width;
+ data = readl(reg_base + cfg_reg);
+
+ if (set) {
+ cfg_value = PINCFG_UNPACK_VALUE(*config);
+ data &= ~(mask << shift);
+ data |= (cfg_value << shift);
+ writel(data, reg_base + cfg_reg);
+ } else {
+ data >>= shift;
+ data &= mask;
+ *config = PINCFG_PACK(cfg_type, data);
+ }
+ return 0;
+}
+
+/* set the pin config settings for a specified pin */
+static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long config)
+{
+ return samsung_pinconf_rw(pctldev, pin, &config, true);
+}
+
+/* get the pin config settings for a specified pin */
+static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config)
+{
+ return samsung_pinconf_rw(pctldev, pin, config, false);
+}
+
+/* set the pin config settings for a specified pin group */
+static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned group, unsigned long config)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ const unsigned int *pins;
+ unsigned int cnt;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pins = drvdata->pin_groups[group].pins;
+
+ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++)
+ samsung_pinconf_set(pctldev, pins[cnt], config);
+
+ return 0;
+}
+
+/* get the pin config settings for a specified pin group */
+static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned int group, unsigned long *config)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ const unsigned int *pins;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pins = drvdata->pin_groups[group].pins;
+ samsung_pinconf_get(pctldev, pins[0], config);
+ return 0;
+}
+
+/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
+static struct pinconf_ops samsung_pinconf_ops = {
+ .pin_config_get = samsung_pinconf_get,
+ .pin_config_set = samsung_pinconf_set,
+ .pin_config_group_get = samsung_pinconf_group_get,
+ .pin_config_group_set = samsung_pinconf_group_set,
+};
+
+/* gpiolib gpio_set callback function */
+static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ void __iomem *reg;
+ u32 pin_offset, data;
+
+ pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
+ data = readl(reg + DAT_REG);
+ data &= ~(1 << pin_offset);
+ if (value)
+ data |= 1 << pin_offset;
+ writel(data, reg + DAT_REG);
+}
+
+/* gpiolib gpio_get callback function */
+static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ void __iomem *reg;
+ u32 pin_offset, data;
+
+ pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
+ data = readl(reg + DAT_REG);
+ data >>= pin_offset;
+ data &= 1;
+ return data;
+}
+
+/*
+ * gpiolib gpio_direction_input callback function. The setting of the pin
+ * mux function as 'gpio input' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+/*
+ * gpiolib gpio_direction_output callback function. The setting of the pin
+ * mux function as 'gpio output' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ samsung_gpio_set(gc, offset, value);
+ return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+/*
+ * Parse the pin names listed in the 'samsung,pins' property and convert it
+ * into a list of gpio numbers are create a pin group from it.
+ */
+static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev,
+ struct device_node *cfg_np, struct pinctrl_desc *pctl,
+ unsigned int **pin_list, unsigned int *npins)
+{
+ struct device *dev = &pdev->dev;
+ struct property *prop;
+ struct pinctrl_pin_desc const *pdesc = pctl->pins;
+ unsigned int idx = 0, cnt;
+ const char *pin_name;
+
+ *npins = of_property_count_strings(cfg_np, "samsung,pins");
+ if (*npins < 0) {
+ dev_err(dev, "invalid pin list in %s node", cfg_np->name);
+ return -EINVAL;
+ }
+
+ *pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL);
+ if (!*pin_list) {
+ dev_err(dev, "failed to allocate memory for pin list\n");
+ return -ENOMEM;
+ }
+
+ of_property_for_each_string(cfg_np, "samsung,pins", prop, pin_name) {
+ for (cnt = 0; cnt < pctl->npins; cnt++) {
+ if (pdesc[cnt].name) {
+ if (!strcmp(pin_name, pdesc[cnt].name)) {
+ (*pin_list)[idx++] = pdesc[cnt].number;
+ break;
+ }
+ }
+ }
+ if (cnt == pctl->npins) {
+ dev_err(dev, "pin %s not valid in %s node\n",
+ pin_name, cfg_np->name);
+ devm_kfree(dev, *pin_list);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Parse the information about all the available pin groups and pin functions
+ * from device node of the pin-controller. A pin group is formed with all
+ * the pins listed in the "samsung,pins" property.
+ */
+static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dev_np = dev->of_node;
+ struct device_node *cfg_np;
+ struct samsung_pin_group *groups, *grp;
+ struct samsung_pmx_func *functions, *func;
+ unsigned *pin_list;
+ unsigned int npins, grp_cnt, func_idx = 0;
+ char *gname, *fname;
+ int ret;
+
+ grp_cnt = of_get_child_count(dev_np);
+ if (!grp_cnt)
+ return -EINVAL;
+
+ groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL);
+ if (!groups) {
+ dev_err(dev, "failed allocate memory for ping group list\n");
+ return -EINVAL;
+ }
+ grp = groups;
+
+ functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL);
+ if (!functions) {
+ dev_err(dev, "failed to allocate memory for function list\n");
+ return -EINVAL;
+ }
+ func = functions;
+
+ /*
+ * Iterate over all the child nodes of the pin controller node
+ * and create pin groups and pin function lists.
+ */
+ for_each_child_of_node(dev_np, cfg_np) {
+ u32 function;
+ if (of_find_property(cfg_np, "interrupt-controller", NULL))
+ continue;
+
+ ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np,
+ &drvdata->pctl, &pin_list, &npins);
+ if (ret)
+ return ret;
+
+ /* derive pin group name from the node name */
+ gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
+ GFP_KERNEL);
+ if (!gname) {
+ dev_err(dev, "failed to alloc memory for group name\n");
+ return -ENOMEM;
+ }
+ sprintf(gname, "%s%s", cfg_np->name, GROUP_SUFFIX);
+
+ grp->name = gname;
+ grp->pins = pin_list;
+ grp->num_pins = npins;
+ of_property_read_u32(cfg_np, "samsung,pin-function", &function);
+ grp->func = function;
+ grp++;
+
+ if (!of_find_property(cfg_np, "samsung,pin-function", NULL))
+ continue;
+
+ /* derive function name from the node name */
+ fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
+ GFP_KERNEL);
+ if (!fname) {
+ dev_err(dev, "failed to alloc memory for func name\n");
+ return -ENOMEM;
+ }
+ sprintf(fname, "%s%s", cfg_np->name, FUNCTION_SUFFIX);
+
+ func->name = fname;
+ func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
+ if (!func->groups) {
+ dev_err(dev, "failed to alloc memory for group list "
+ "in pin function");
+ return -ENOMEM;
+ }
+ func->groups[0] = gname;
+ func->num_groups = 1;
+ func++;
+ func_idx++;
+ }
+
+ drvdata->pin_groups = groups;
+ drvdata->nr_groups = grp_cnt;
+ drvdata->pmx_functions = functions;
+ drvdata->nr_functions = func_idx;
+
+ return 0;
+}
+
+/* register the pinctrl interface with the pinctrl subsystem */
+static int __init samsung_pinctrl_register(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct pinctrl_desc *ctrldesc = &drvdata->pctl;
+ struct pinctrl_pin_desc *pindesc, *pdesc;
+ struct samsung_pin_bank *pin_bank;
+ char *pin_names;
+ int pin, bank, ret;
+
+ ctrldesc->name = "samsung-pinctrl";
+ ctrldesc->owner = THIS_MODULE;
+ ctrldesc->pctlops = &samsung_pctrl_ops;
+ ctrldesc->pmxops = &samsung_pinmux_ops;
+ ctrldesc->confops = &samsung_pinconf_ops;
+
+ pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
+ drvdata->ctrl->nr_pins, GFP_KERNEL);
+ if (!pindesc) {
+ dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
+ return -ENOMEM;
+ }
+ ctrldesc->pins = pindesc;
+ ctrldesc->npins = drvdata->ctrl->nr_pins;
+ ctrldesc->npins = drvdata->ctrl->nr_pins;
+
+ /* dynamically populate the pin number and pin name for pindesc */
+ for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
+ pdesc->number = pin + drvdata->ctrl->base;
+
+ /*
+ * allocate space for storing the dynamically generated names for all
+ * the pins which belong to this pin-controller.
+ */
+ pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH *
+ drvdata->ctrl->nr_pins, GFP_KERNEL);
+ if (!pin_names) {
+ dev_err(&pdev->dev, "mem alloc for pin names failed\n");
+ return -ENOMEM;
+ }
+
+ /* for each pin, the name of the pin is pin-bank name + pin number */
+ for (bank = 0; bank < drvdata->ctrl->nr_banks; bank++) {
+ pin_bank = &drvdata->ctrl->pin_banks[bank];
+ for (pin = 0; pin < pin_bank->nr_pins; pin++) {
+ sprintf(pin_names, "%s-%d", pin_bank->name, pin);
+ pdesc = pindesc + pin_bank->pin_base + pin;
+ pdesc->name = pin_names;
+ pin_names += PIN_NAME_LENGTH;
+ }
+ }
+
+ drvdata->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, drvdata);
+ if (!drvdata->pctl_dev) {
+ dev_err(&pdev->dev, "could not register pinctrl driver\n");
+ return -EINVAL;
+ }
+
+ drvdata->grange.name = "samsung-pctrl-gpio-range";
+ drvdata->grange.id = 0;
+ drvdata->grange.base = drvdata->ctrl->base;
+ drvdata->grange.npins = drvdata->ctrl->nr_pins;
+ drvdata->grange.gc = drvdata->gc;
+ pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange);
+
+ ret = samsung_pinctrl_parse_dt(pdev, drvdata);
+ if (ret) {
+ pinctrl_unregister(drvdata->pctl_dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* register the gpiolib interface with the gpiolib subsystem */
+static int __init samsung_gpiolib_register(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct gpio_chip *gc;
+ int ret;
+
+ gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+ if (!gc) {
+ dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n");
+ return -ENOMEM;
+ }
+
+ drvdata->gc = gc;
+ gc->base = drvdata->ctrl->base;
+ gc->ngpio = drvdata->ctrl->nr_pins;
+ gc->dev = &pdev->dev;
+ gc->set = samsung_gpio_set;
+ gc->get = samsung_gpio_get;
+ gc->direction_input = samsung_gpio_direction_input;
+ gc->direction_output = samsung_gpio_direction_output;
+ gc->label = drvdata->ctrl->label;
+ gc->owner = THIS_MODULE;
+ ret = gpiochip_add(gc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
+ "code: %d\n", gc->label, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* unregister the gpiolib interface with the gpiolib subsystem */
+static int __init samsung_gpiolib_unregister(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ int ret = gpiochip_remove(drvdata->gc);
+ if (ret) {
+ dev_err(&pdev->dev, "gpio chip remove failed\n");
+ return ret;
+ }
+ return 0;
+}
+
+static const struct of_device_id samsung_pinctrl_dt_match[];
+
+/* retrieve the soc specific data */
+static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
+ struct platform_device *pdev)
+{
+ int id;
+ const struct of_device_id *match;
+ const struct device_node *node = pdev->dev.of_node;
+
+ id = of_alias_get_id(pdev->dev.of_node, "pinctrl");
+ if (id < 0) {
+ dev_err(&pdev->dev, "failed to get alias id\n");
+ return NULL;
+ }
+ match = of_match_node(samsung_pinctrl_dt_match, node);
+ return (struct samsung_pin_ctrl *)match->data + id;
+}
+
+static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct device *dev = &pdev->dev;
+ struct samsung_pin_ctrl *ctrl;
+ struct resource *res;
+ int ret;
+
+ if (!dev->of_node) {
+ dev_err(dev, "device tree node not found\n");
+ return -ENODEV;
+ }
+
+ ctrl = samsung_pinctrl_get_soc_data(pdev);
+ if (!ctrl) {
+ dev_err(&pdev->dev, "driver data not available\n");
+ return -EINVAL;
+ }
+
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata) {
+ dev_err(dev, "failed to allocate memory for driver's "
+ "private data\n");
+ return -ENOMEM;
+ }
+ drvdata->ctrl = ctrl;
+ drvdata->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "cannot find IO resource\n");
+ return -ENOENT;
+ }
+
+ drvdata->virt_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!drvdata->virt_base) {
+ dev_err(dev, "ioremap failed\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res)
+ drvdata->irq = res->start;
+
+ ret = samsung_gpiolib_register(pdev, drvdata);
+ if (ret)
+ return ret;
+
+ ret = samsung_pinctrl_register(pdev, drvdata);
+ if (ret) {
+ samsung_gpiolib_unregister(pdev, drvdata);
+ return ret;
+ }
+
+ if (ctrl->eint_gpio_init)
+ ctrl->eint_gpio_init(drvdata);
+ if (ctrl->eint_wkup_init)
+ ctrl->eint_wkup_init(drvdata);
+
+ platform_set_drvdata(pdev, drvdata);
+ return 0;
+}
+
+static const struct of_device_id samsung_pinctrl_dt_match[] = {
+ { .compatible = "samsung,pinctrl-exynos4210",
+ .data = (void *)exynos4210_pin_ctrl },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
+
+static struct platform_driver samsung_pinctrl_driver = {
+ .probe = samsung_pinctrl_probe,
+ .driver = {
+ .name = "samsung-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(samsung_pinctrl_dt_match),
+ },
+};
+
+static int __init samsung_pinctrl_drv_register(void)
+{
+ return platform_driver_register(&samsung_pinctrl_driver);
+}
+postcore_initcall(samsung_pinctrl_drv_register);
+
+static void __exit samsung_pinctrl_drv_unregister(void)
+{
+ platform_driver_unregister(&samsung_pinctrl_driver);
+}
+module_exit(samsung_pinctrl_drv_unregister);
+
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
+MODULE_DESCRIPTION("Samsung pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
new file mode 100644
index 000000000000..b8956934cda6
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -0,0 +1,239 @@
+/*
+ * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_SAMSUNG_H
+#define __PINCTRL_SAMSUNG_H
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+
+/* register offsets within a pin bank */
+#define DAT_REG 0x4
+#define PUD_REG 0x8
+#define DRV_REG 0xC
+#define CONPDN_REG 0x10
+#define PUDPDN_REG 0x14
+
+/* pinmux function number for pin as gpio output line */
+#define FUNC_OUTPUT 0x1
+
+/**
+ * enum pincfg_type - possible pin configuration types supported.
+ * @PINCFG_TYPE_PUD: Pull up/down configuration.
+ * @PINCFG_TYPE_DRV: Drive strength configuration.
+ * @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
+ * @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
+ */
+enum pincfg_type {
+ PINCFG_TYPE_PUD,
+ PINCFG_TYPE_DRV,
+ PINCFG_TYPE_CON_PDN,
+ PINCFG_TYPE_PUD_PDN,
+};
+
+/*
+ * pin configuration (pull up/down and drive strength) type and its value are
+ * packed together into a 16-bits. The upper 8-bits represent the configuration
+ * type and the lower 8-bits hold the value of the configuration type.
+ */
+#define PINCFG_TYPE_MASK 0xFF
+#define PINCFG_VALUE_SHIFT 8
+#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
+#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
+#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
+#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
+ PINCFG_VALUE_SHIFT)
+/**
+ * enum eint_type - possible external interrupt types.
+ * @EINT_TYPE_NONE: bank does not support external interrupts
+ * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
+ * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
+ *
+ * Samsung GPIO controller groups all the available pins into banks. The pins
+ * in a pin bank can support external gpio interrupts or external wakeup
+ * interrupts or no interrupts at all. From a software perspective, the only
+ * difference between external gpio and external wakeup interrupts is that
+ * the wakeup interrupts can additionally wakeup the system if it is in
+ * suspended state.
+ */
+enum eint_type {
+ EINT_TYPE_NONE,
+ EINT_TYPE_GPIO,
+ EINT_TYPE_WKUP,
+};
+
+/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
+#define PIN_NAME_LENGTH 10
+
+#define PIN_GROUP(n, p, f) \
+ { \
+ .name = n, \
+ .pins = p, \
+ .num_pins = ARRAY_SIZE(p), \
+ .func = f \
+ }
+
+#define PMX_FUNC(n, g) \
+ { \
+ .name = n, \
+ .groups = g, \
+ .num_groups = ARRAY_SIZE(g), \
+ }
+
+struct samsung_pinctrl_drv_data;
+
+/**
+ * struct samsung_pin_bank: represent a controller pin-bank.
+ * @reg_offset: starting offset of the pin-bank registers.
+ * @pin_base: starting pin number of the bank.
+ * @nr_pins: number of pins included in this bank.
+ * @func_width: width of the function selector bit field.
+ * @pud_width: width of the pin pull up/down selector bit field.
+ * @drv_width: width of the pin driver strength selector bit field.
+ * @conpdn_width: width of the sleep mode function selector bin field.
+ * @pudpdn_width: width of the sleep mode pull up/down selector bit field.
+ * @eint_type: type of the external interrupt supported by the bank.
+ * @irq_base: starting controller local irq number of the bank.
+ * @name: name to be prefixed for each pin in this pin bank.
+ */
+struct samsung_pin_bank {
+ u32 pctl_offset;
+ u32 pin_base;
+ u8 nr_pins;
+ u8 func_width;
+ u8 pud_width;
+ u8 drv_width;
+ u8 conpdn_width;
+ u8 pudpdn_width;
+ enum eint_type eint_type;
+ u32 irq_base;
+ char *name;
+};
+
+/**
+ * struct samsung_pin_ctrl: represent a pin controller.
+ * @pin_banks: list of pin banks included in this controller.
+ * @nr_banks: number of pin banks.
+ * @base: starting system wide pin number.
+ * @nr_pins: number of pins supported by the controller.
+ * @nr_gint: number of external gpio interrupts supported.
+ * @nr_wint: number of external wakeup interrupts supported.
+ * @geint_con: offset of the ext-gpio controller registers.
+ * @geint_mask: offset of the ext-gpio interrupt mask registers.
+ * @geint_pend: offset of the ext-gpio interrupt pending registers.
+ * @weint_con: offset of the ext-wakeup controller registers.
+ * @weint_mask: offset of the ext-wakeup interrupt mask registers.
+ * @weint_pend: offset of the ext-wakeup interrupt pending registers.
+ * @svc: offset of the interrupt service register.
+ * @eint_gpio_init: platform specific callback to setup the external gpio
+ * interrupts for the controller.
+ * @eint_wkup_init: platform specific callback to setup the external wakeup
+ * interrupts for the controller.
+ * @label: for debug information.
+ */
+struct samsung_pin_ctrl {
+ struct samsung_pin_bank *pin_banks;
+ u32 nr_banks;
+
+ u32 base;
+ u32 nr_pins;
+ u32 nr_gint;
+ u32 nr_wint;
+
+ u32 geint_con;
+ u32 geint_mask;
+ u32 geint_pend;
+
+ u32 weint_con;
+ u32 weint_mask;
+ u32 weint_pend;
+
+ u32 svc;
+
+ int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
+ int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
+ char *label;
+};
+
+/**
+ * struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
+ * @virt_base: register base address of the controller.
+ * @dev: device instance representing the controller.
+ * @irq: interrpt number used by the controller to notify gpio interrupts.
+ * @ctrl: pin controller instance managed by the driver.
+ * @pctl: pin controller descriptor registered with the pinctrl subsystem.
+ * @pctl_dev: cookie representing pinctrl device instance.
+ * @pin_groups: list of pin groups available to the driver.
+ * @nr_groups: number of such pin groups.
+ * @pmx_functions: list of pin functions available to the driver.
+ * @nr_function: number of such pin functions.
+ * @gc: gpio_chip instance registered with gpiolib.
+ * @grange: linux gpio pin range supported by this controller.
+ */
+struct samsung_pinctrl_drv_data {
+ void __iomem *virt_base;
+ struct device *dev;
+ int irq;
+
+ struct samsung_pin_ctrl *ctrl;
+ struct pinctrl_desc pctl;
+ struct pinctrl_dev *pctl_dev;
+
+ const struct samsung_pin_group *pin_groups;
+ unsigned int nr_groups;
+ const struct samsung_pmx_func *pmx_functions;
+ unsigned int nr_functions;
+
+ struct irq_domain *gpio_irqd;
+ struct irq_domain *wkup_irqd;
+
+ struct gpio_chip *gc;
+ struct pinctrl_gpio_range grange;
+};
+
+/**
+ * struct samsung_pin_group: represent group of pins of a pinmux function.
+ * @name: name of the pin group, used to lookup the group.
+ * @pins: the pins included in this group.
+ * @num_pins: number of pins included in this group.
+ * @func: the function number to be programmed when selected.
+ */
+struct samsung_pin_group {
+ const char *name;
+ const unsigned int *pins;
+ u8 num_pins;
+ u8 func;
+};
+
+/**
+ * struct samsung_pmx_func: represent a pin function.
+ * @name: name of the pin function, used to lookup the function.
+ * @groups: one or more names of pin groups that provide this function.
+ * @num_groups: number of groups included in @groups.
+ */
+struct samsung_pmx_func {
+ const char *name;
+ const char **groups;
+ u8 num_groups;
+};
+
+/* list of all exported SoC specific data */
+extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
+
+#endif /* __PINCTRL_SAMSUNG_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 3aade1d8f410..c6f8dad2ceb0 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -237,4 +237,20 @@ struct gpio_led_platform_data {
struct platform_device *gpio_led_register_device(
int id, const struct gpio_led_platform_data *pdata);
+enum cpu_led_event {
+ CPU_LED_IDLE_START, /* CPU enters idle */
+ CPU_LED_IDLE_END, /* CPU idle ends */
+ CPU_LED_START, /* Machine starts, especially resume */
+ CPU_LED_STOP, /* Machine stops, especially suspend */
+ CPU_LED_HALTED, /* Machine shutdown */
+};
+#ifdef CONFIG_LEDS_TRIGGER_CPU
+extern void ledtrig_cpu(enum cpu_led_event evt);
+#else
+static inline void ledtrig_cpu(enum cpu_led_event evt)
+{
+ return;
+}
+#endif
+
#endif /* __LINUX_LEDS_H_INCLUDED */