[PPC] Remove 85xx from arch/ppc

85xx exists in arch/powerpc as well as cuImage support to boot from
a u-boot that doesn't support device trees.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

63 files changed, 20 insertions, 14608 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 08e083d30dc6..db5934cdafb3 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -104,12 +104,6 @@ config 8xx
 	bool "8xx"
 	select PPC_LIB_RHEAP
 
-config E200
-	bool "e200"
-
-config E500
-	bool "e500"
-
 endchoice
 
 config PPC_FPU
@@ -124,25 +118,14 @@ config PPC_DCR
 	depends on PPC_DCR_NATIVE
 	default y
 
-config BOOKE
-	bool
-	depends on E200 || E500
-	default y
-
-config FSL_BOOKE
-	bool
-	depends on E200 || E500
-	default y
-
 config PTE_64BIT
 	bool
-	depends on 44x || E500
+	depends on 44x
 	default y if 44x
-	default y if E500 && PHYS_64BIT
 
 config PHYS_64BIT
-	bool 'Large physical address support' if E500
-	depends on 44x || E500
+	bool
+	depends on 44x
 	default y if 44x
 	---help---
 	  This option enables kernel support for larger than 32-bit physical
@@ -167,21 +150,6 @@ config ALTIVEC
 
 	  If in doubt, say Y here.
 
-config SPE
-	bool "SPE Support"
-	depends on E200 || E500
-	---help---
-	  This option enables kernel support for the Signal Processing
-	  Extensions (SPE) to the PowerPC processor. The kernel currently
-	  supports saving and restoring SPE registers, and turning on the
-	  'spe enable' bit so user processes can execute SPE instructions.
-
-	  This option is only useful if you have a processor that supports
-	  SPE (e500, otherwise known as 85xx series), but does not have any
-	  effect on a non-spe cpu (it does, however add code to the kernel).
-
-	  If in doubt, say Y here.
-
 config TAU
 	bool "Thermal Management Support"
 	depends on 6xx && !8260
@@ -228,7 +196,7 @@ config TAU_AVERAGE
 
 config MATH_EMULATION
 	bool "Math emulation"
-	depends on 4xx || 8xx || E200 || E500
+	depends on 4xx || 8xx
 	---help---
 	  Some PowerPC chips designed for embedded applications do not have
 	  a floating-point unit and therefore do not implement the
@@ -279,7 +247,6 @@ config PPC601_SYNC_FIX
 	  If in doubt, say Y here.
 
 source arch/ppc/platforms/4xx/Kconfig
-source arch/ppc/platforms/85xx/Kconfig
 
 config PPC_STD_MMU
 	bool
@@ -288,7 +255,7 @@ config PPC_STD_MMU
 
 config NOT_COHERENT_CACHE
 	bool
-	depends on 4xx || 8xx || E200
+	depends on 4xx || 8xx
 	default y
 
 endmenu
@@ -1045,13 +1012,13 @@ config GENERIC_ISA_DMA
 
 config PPC_I8259
 	bool
-	default y if 85xx || PPC_PREP
+	default y if PPC_PREP
 	default n
 
 config PPC_INDIRECT_PCI
 	bool
 	depends on PCI
-	default y if 40x || 44x || 85xx || PPC_PREP
+	default y if 40x || 44x || PPC_PREP
 	default n
 
 config EISA
@@ -1068,8 +1035,8 @@ config MCA
 	bool
 
 config PCI
-	bool "PCI support" if 40x || CPM2 || 85xx || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx && !85xx
+	bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
+	default y if !40x && !CPM2 && !8xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help
 	  Find out whether your system includes a PCI bus. PCI is the name of
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index a4fef18075ff..8df7f0e4c3a6 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -36,14 +36,8 @@ LINUXINCLUDE    += -Iarch/$(ARCH)/include
 
 CHECKFLAGS	+= -D__powerpc__
 
-ifndef CONFIG_FSL_BOOKE
-KBUILD_CFLAGS	+= -mstring
-endif
-
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
-cpu-as-$(CONFIG_E500)		+= -Wa,-me500
-cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 
 KBUILD_AFLAGS += $(cpu-as-y)
 KBUILD_CFLAGS += $(cpu-as-y)
@@ -55,7 +49,6 @@ head-y				:= arch/ppc/kernel/head.o
 head-$(CONFIG_8xx)		:= arch/ppc/kernel/head_8xx.o
 head-$(CONFIG_4xx)		:= arch/ppc/kernel/head_4xx.o
 head-$(CONFIG_44x)		:= arch/ppc/kernel/head_44x.o
-head-$(CONFIG_FSL_BOOKE)	:= arch/ppc/kernel/head_fsl_booke.o
 
 head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
 
@@ -65,7 +58,6 @@ core-y				+= arch/ppc/kernel/ arch/powerpc/kernel/ \
 				   arch/ppc/syslib/ arch/powerpc/sysdev/ \
 				   arch/powerpc/lib/
 core-$(CONFIG_4xx)		+= arch/ppc/platforms/4xx/
-core-$(CONFIG_85xx)		+= arch/ppc/platforms/85xx/
 core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
 core-$(CONFIG_XMON)		+= arch/ppc/xmon/
 drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
diff --git a/arch/ppc/configs/TQM8540_defconfig b/arch/ppc/configs/TQM8540_defconfig
deleted file mode 100644
index f33f0e772dcb..000000000000
--- a/arch/ppc/configs/TQM8540_defconfig
+++ /dev/null
@@ -1,973 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Fri Nov 25 17:26:50 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_TQM8540=y
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-CONFIG_MPC8540=y
-
-#
-# Platform options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/TQM8541_defconfig b/arch/ppc/configs/TQM8541_defconfig
deleted file mode 100644
index e00cd62daa3f..000000000000
--- a/arch/ppc/configs/TQM8541_defconfig
+++ /dev/null
@@ -1,986 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Wed Nov 30 13:36:28 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-CONFIG_TQM8541=y
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-CONFIG_MPC8555=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_FS_ENET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_MPC8260 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_MAX6900 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8563 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/TQM8555_defconfig b/arch/ppc/configs/TQM8555_defconfig
deleted file mode 100644
index 43a0d9df1e23..000000000000
--- a/arch/ppc/configs/TQM8555_defconfig
+++ /dev/null
@@ -1,983 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 17:10:52 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-CONFIG_TQM8555=y
-# CONFIG_TQM8560 is not set
-CONFIG_MPC8555=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_FS_ENET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/TQM8560_defconfig b/arch/ppc/configs/TQM8560_defconfig
deleted file mode 100644
index a814d17a2be9..000000000000
--- a/arch/ppc/configs/TQM8560_defconfig
+++ /dev/null
@@ -1,992 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Wed Nov 30 16:47:53 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8555 is not set
-CONFIG_TQM8560=y
-CONFIG_MPC8560=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_FS_ENET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-CONFIG_SERIAL_CPM_SCC1=y
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-# CONFIG_SERIAL_CPM_SMC1 is not set
-# CONFIG_SERIAL_CPM_SMC2 is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_MPC8260 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_MAX6900 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8563 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8540_ads_defconfig b/arch/ppc/configs/mpc8540_ads_defconfig
deleted file mode 100644
index bf676ebd99ab..000000000000
--- a/arch/ppc/configs/mpc8540_ads_defconfig
+++ /dev/null
@@ -1,706 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc1
-# Thu Jan 20 01:23:13 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-CONFIG_MPC8540_ADS=y
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-CONFIG_MPC8540=y
-
-#
-# Platform options
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8548_cds_defconfig b/arch/ppc/configs/mpc8548_cds_defconfig
deleted file mode 100644
index f36fc5db540b..000000000000
--- a/arch/ppc/configs/mpc8548_cds_defconfig
+++ /dev/null
@@ -1,658 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue May 24 22:36:27 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-CONFIG_MPC8548_CDS=y
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_MPC8548=y
-
-#
-# Platform options
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig
deleted file mode 100644
index 4f1e320acfbe..000000000000
--- a/arch/ppc/configs/mpc8555_cds_defconfig
+++ /dev/null
@@ -1,784 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue May 17 11:56:01 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-CONFIG_MPC8555_CDS=y
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_MPC8555=y
-CONFIG_85xx_PCI2=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8560_ads_defconfig b/arch/ppc/configs/mpc8560_ads_defconfig
deleted file mode 100644
index f12d48fcbba7..000000000000
--- a/arch/ppc/configs/mpc8560_ads_defconfig
+++ /dev/null
@@ -1,769 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Thu Aug 11 18:14:45 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-CONFIG_MPC8560_ADS=y
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_MPC8560=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-CONFIG_SERIAL_CPM_SCC1=y
-CONFIG_SERIAL_CPM_SCC2=y
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-# CONFIG_SERIAL_CPM_SMC1 is not set
-# CONFIG_SERIAL_CPM_SMC2 is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig
deleted file mode 100644
index 70d6f842aa9b..000000000000
--- a/arch/ppc/configs/stx_gp3_defconfig
+++ /dev/null
@@ -1,989 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue May 24 18:11:04 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_SPE is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-CONFIG_STX_GP3=y
-CONFIG_MPC8560=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-CONFIG_RAPIDIO=y
-CONFIG_RAPIDIO_8_BIT_TRANSPORT=y
-CONFIG_RAPIDIO_DISC_TIMEOUT=30
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_RIONET=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-# CONFIG_SERIAL_CPM_SMC1 is not set
-# CONFIG_SERIAL_CPM_SMC2 is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 5da0ca7c302f..7b739054968f 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -4,7 +4,6 @@
 extra-$(CONFIG_PPC_STD_MMU)	:= head.o
 extra-$(CONFIG_40x)		:= head_4xx.o
 extra-$(CONFIG_44x)		:= head_44x.o
-extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
 extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
index e8e94321b59e..a51a17714231 100644
--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -54,12 +54,6 @@ main(void)
 	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
 #endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-	DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
-	DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc));
-	DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr));
-	DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
-#endif /* CONFIG_SPE */
 	/* Interrupt register frame */
 	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
 	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 59e77eb63338..5f3a5d068a5c 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -519,12 +519,7 @@ BEGIN_FTR_SECTION
 	stw	r12,THREAD+THREAD_VRSAVE(r2)
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-	oris	r0,r0,MSR_SPE@h	 /* Disable SPE */
-	mfspr	r12,SPRN_SPEFSCR /* save spefscr register value */
-	stw	r12,THREAD+THREAD_SPEFSCR(r2)
-#endif /* CONFIG_SPE */
-	and.	r0,r0,r11	/* FP or altivec or SPE enabled? */
+	and.	r0,r0,r11	/* FP or altivec enabled? */
 	beq+	1f
 	andc	r11,r11,r0
 	MTMSRD(r11)
@@ -557,11 +552,6 @@ BEGIN_FTR_SECTION
 	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-	lwz	r0,THREAD+THREAD_SPEFSCR(r2)
-	mtspr	SPRN_SPEFSCR,r0		/* restore SPEFSCR reg */
-#endif /* CONFIG_SPE */
-
 	lwz	r0,_CCR(r1)
 	mtcrf	0xFF,r0
 	/* r3-r12 are destroyed -- Cort */
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
index f3d274c6b231..166d597b6db2 100644
--- a/arch/ppc/kernel/head_booke.h
+++ b/arch/ppc/kernel/head_booke.h
@@ -212,60 +212,6 @@ label:
  * save (and later restore) the MSR via SPRN_CSRR1, which will still have
  * the MSR_DE bit set.
  */
-#ifdef CONFIG_E200
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
-	DEBUG_EXCEPTION_PROLOG;						      \
-									      \
-	/*								      \
-	 * If there is a single step or branch-taken exception in an	      \
-	 * exception entry sequence, it was probably meant to apply to	      \
-	 * the code where the exception occurred (since exception entry	      \
-	 * doesn't turn off DE automatically).  We simulate the effect	      \
-	 * of turning off DE on entry to an exception handler by turning      \
-	 * off DE in the CSRR1 value and clearing the debug status.	      \
-	 */								      \
-	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
-	beq+	2f;							      \
-									      \
-	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
-	ori	r10,r10,KERNELBASE@l;					      \
-	cmplw	r12,r10;						      \
-	blt+	2f;			/* addr below exception vectors */    \
-									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
-	cmplw	r12,r10;						      \
-	bgt+	2f;			/* addr above exception vectors */    \
-									      \
-	/* here it looks like we got an inappropriate debug exception. */     \
-1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CDRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
-	mtspr	SPRN_DBSR,r10;						      \
-	/* restore state and get out */					      \
-	lwz	r10,_CCR(r11);						      \
-	lwz	r0,GPR0(r11);						      \
-	lwz	r1,GPR1(r11);						      \
-	mtcrf	0x80,r10;						      \
-	mtspr	SPRN_DSRR0,r12;						      \
-	mtspr	SPRN_DSRR1,r9;						      \
-	lwz	r9,GPR9(r11);						      \
-	lwz	r12,GPR12(r11);						      \
-	mtspr	DEBUG_SPRG,r8;						      \
-	BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
-	mfspr	r8,DEBUG_SPRG;						      \
-									      \
-	RFDI;								      \
-	b	.;							      \
-									      \
-	/* continue normal handling for a critical exception... */	      \
-2:	mfspr	r4,SPRN_DBSR;						      \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
-#else
 #define DEBUG_EXCEPTION							      \
 	START_EXCEPTION(Debug);						      \
 	CRITICAL_EXCEPTION_PROLOG;					      \
@@ -318,7 +264,6 @@ label:
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-#endif
 
 #define INSTRUCTION_STORAGE_EXCEPTION					      \
 	START_EXCEPTION(InstructionStorage)				      \
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
deleted file mode 100644
index 1f155d399d57..000000000000
--- a/arch/ppc/kernel/head_fsl_booke.S
+++ /dev/null
@@ -1,1065 +0,0 @@
-/*
- * Kernel execution entry point code.
- *
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *    Copyright 2002-2004 MontaVista Software, Inc.
- *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
- *    Copyright 2004 Freescale Semiconductor, Inc
- *      PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include "head_booke.h"
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=128")
- *   r7 - End of kernel command line string
- *
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-	/*
-	 * Reserve a word at a fixed location to store the address
-	 * of abatron_pteptrs
-	 */
-	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r24,0		/* CPU number */
-
-/* We try to not make any assumptions about how the boot loader
- * setup or used the TLBs.  We invalidate all mappings from the
- * boot loader and load a single entry in TLB1[0] to map the
- * first 16M of kernel memory.  Any boot info passed from the
- * bootloader needs to live in this first 16M.
- *
- * Requirement on bootloader:
- *  - The page we're executing in needs to reside in TLB1 and
- *    have IPROT=1.  If not an invalidate broadcast could
- *    evict the entry we're currently executing in.
- *
- *  r3 = Index of TLB1 were executing in
- *  r4 = Current MSR[IS]
- *  r5 = Index of TLB1 temp mapping
- *
- * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0]
- * if needed
- */
-
-/* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
-invstr:	mflr	r6				/* Make it accessible */
-	mfmsr	r7
-	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
-	mfspr	r7, SPRN_PID0
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
-#ifndef CONFIG_E200
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-	mfspr	r7,SPRN_PID1
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-	mfspr	r7, SPRN_PID2
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* Fall through, we had to match */
-#endif
-match_TLB:
-	mfspr	r7,SPRN_MAS0
-	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
-
-	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
-	oris	r7,r7,MAS1_IPROT@h
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-
-/* 2. Invalidate all entries except the entry we're executing in */
-	mfspr	r9,SPRN_TLB1CFG
-	andi.	r9,r9,0xfff
-	li	r6,0				/* Set Entry counter to 0 */
-1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r7,SPRN_MAS1
-	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
-	cmpw	r3,r6
-	beq	skpinv				/* Dont update the current execution TLB */
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-	isync
-skpinv:	addi	r6,r6,1				/* Increment */
-	cmpw	r6,r9				/* Are we done? */
-	bne	1b				/* If not, repeat */
-
-	/* Invalidate TLB0 */
-	li      r6,0x04
-	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	/* Invalidate TLB1 */
-	li      r6,0x0c
-	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
-
-/* 3. Setup a temp mapping and jump to it */
-	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
-	addi	r5, r5, 0x1
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-
-	/* Just modify the entry ID and EPN for the temp mapping */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
-	slwi	r6,r6,12
-	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
-	mtspr	SPRN_MAS1,r6
-	mfspr	r6,SPRN_MAS2
-	li	r7,0		/* temp EPN = 0 */
-	rlwimi	r7,r6,0,20,31
-	mtspr	SPRN_MAS2,r7
-	tlbwe
-
-	xori	r6,r4,1
-	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
-1:	mflr	r9
-	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,24
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r6
-	rfi
-
-/* 4. Clear out PIDs & Search info */
-	li	r6,0
-	mtspr	SPRN_PID0,r6
-#ifndef CONFIG_E200
-	mtspr	SPRN_PID1,r6
-	mtspr	SPRN_PID2,r6
-#endif
-	mtspr	SPRN_MAS6,r6
-
-/* 5. Invalidate mapping we started in */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r6,SPRN_MAS1
-	rlwinm	r6,r6,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r6
-	tlbwe
-	/* Invalidate TLB1 */
-	li      r9,0x0c
-	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
-	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
-	mtspr	SPRN_MAS0,r6
-	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
-	mtspr	SPRN_MAS1,r6
-	li	r7,0
-	lis	r6,KERNELBASE@h
-	ori	r6,r6,KERNELBASE@l
-	rlwimi	r6,r7,0,20,31
-	mtspr	SPRN_MAS2,r6
-	li	r7,(MAS3_SX|MAS3_SW|MAS3_SR)
-	mtspr	SPRN_MAS3,r7
-	tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
-	lis	r7,MSR_KERNEL@h
-	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
-1:	mflr	r9
-	rlwimi	r6,r9,0,20,31
-	addi	r6,r6,24
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r7
-	rfi				/* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r8,SPRN_MAS1
-	rlwinm	r8,r8,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r8
-	tlbwe
-	/* Invalidate TLB1 */
-	li      r9,0x0c
-	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
-
-	/* Establish the interrupt vector offsets */
-	SET_IVOR(0,  CriticalInput);
-	SET_IVOR(1,  MachineCheck);
-	SET_IVOR(2,  DataStorage);
-	SET_IVOR(3,  InstructionStorage);
-	SET_IVOR(4,  ExternalInput);
-	SET_IVOR(5,  Alignment);
-	SET_IVOR(6,  Program);
-	SET_IVOR(7,  FloatingPointUnavailable);
-	SET_IVOR(8,  SystemCall);
-	SET_IVOR(9,  AuxillaryProcessorUnavailable);
-	SET_IVOR(10, Decrementer);
-	SET_IVOR(11, FixedIntervalTimer);
-	SET_IVOR(12, WatchdogTimer);
-	SET_IVOR(13, DataTLBError);
-	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
-	SET_IVOR(32, SPEUnavailable);
-	SET_IVOR(33, SPEFloatingPointData);
-	SET_IVOR(34, SPEFloatingPointRound);
-#ifndef CONFIG_E200
-	SET_IVOR(35, PerformanceMonitor);
-#endif
-
-	/* Establish the interrupt vector base */
-	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
-	mtspr	SPRN_IVPR,r4
-
-	/* Setup the defaults for TLB entries */
-	li	r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
-#ifdef CONFIG_E200
-	oris	r2,r2,MAS4_TLBSELD(1)@h
-#endif
-   	mtspr	SPRN_MAS4, r2
-
-#if 0
-	/* Enable DOZE */
-	mfspr	r2,SPRN_HID0
-	oris	r2,r2,HID0_DOZE@h
-	mtspr	SPRN_HID0, r2
-#endif
-#ifdef CONFIG_E200
-	/* enable dedicated debug exception handling resources (Debug APU) */
-	mfspr	r2,SPRN_HID0
-	ori 	r2,r2,HID0_DAPUEN@l
-	mtspr	SPRN_HID0,r2
-#endif
-
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-	lis	r2,DBCR0_IDM@h
-	mtspr	SPRN_DBCR0,r2
-	isync
-	/* clear any residual debug events */
-	li	r2,-1
-	mtspr	SPRN_DBSR,r2
-#endif
-
-	/*
-	 * This is where the main kernel code starts.
-	 */
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to current thread */
-	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@h
-	ori	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init
-
-	mfspr	r3,SPRN_TLB1CFG
-	andi.	r3,r3,0xfff
-	lis	r4,num_tlbcam_entries@ha
-	stw	r3,num_tlbcam_entries@l(r4)
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-	/* Setup PTE pointers for the Abatron bdiGDB */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	lis	r4, KERNELBASE@h
-	ori	r4, r4, KERNELBASE@l
-	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
-	stw	r6, 0(r5)
-
-	/* Let's move on */
-	lis	r4,start_kernel@h
-	ori	r4,r4,start_kernel@l
-	lis	r3,MSR_KERNEL@h
-	ori	r3,r3,MSR_KERNEL@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi			/* change context and jump to start_kernel */
-
-/* Macros to hide the PTE size differences
- *
- * FIND_PTE -- walks the page tables given EA & pgdir pointer
- *   r10 -- EA of fault
- *   r11 -- PGDIR pointer
- *   r12 -- free
- *   label 2: is the bailout case
- *
- * if we find the pte (fall through):
- *   r11 is low pte word
- *   r12 is pointer to the pte
- */
-#ifdef CONFIG_PTE_64BIT
-#define PTE_FLAGS_OFFSET	4
-#define FIND_PTE	\
-	rlwinm 	r12, r10, 13, 19, 29;	/* Compute pgdir/pmd offset */	\
-	lwzx	r11, r12, r11;		/* Get pgd/pmd entry */		\
-	rlwinm.	r12, r11, 0, 0, 20;	/* Extract pt base address */	\
-	beq	2f;			/* Bail if no table */		\
-	rlwimi	r12, r10, 23, 20, 28;	/* Compute pte address */	\
-	lwz	r11, 4(r12);		/* Get pte entry */
-#else
-#define PTE_FLAGS_OFFSET	0
-#define FIND_PTE	\
-	rlwimi	r11, r10, 12, 20, 29;	/* Create L1 (pgdir/pmd) address */	\
-	lwz	r11, 0(r11);		/* Get L1 entry */			\
-	rlwinm.	r12, r11, 0, 0, 19;	/* Extract L2 (pte) base address */	\
-	beq	2f;			/* Bail if no table */			\
-	rlwimi	r12, r10, 22, 20, 29;	/* Compute PTE address */		\
-	lwz	r11, 0(r12);		/* Get Linux PTE */
-#endif
-
-/*
- * Interrupt vector entry code
- *
- * The Book E MMUs are always on so we don't need to handle
- * interrupts in real mode as with previous PPC processors. In
- * this case we handle interrupts in the kernel virtual address
- * space.
- *
- * Interrupt vectors are dynamically placed relative to the
- * interrupt prefix as determined by the address of interrupt_base.
- * The interrupt vectors offsets are programmed using the labels
- * for each interrupt vector entry.
- *
- * Interrupt vectors must be aligned on a 16 byte boundary.
- * We align on a 32 byte cache line boundary for good measure.
- */
-
-interrupt_base:
-	/* Critical Input Interrupt */
-	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
-
-	/* Machine Check Interrupt */
-#ifdef CONFIG_E200
-	/* no RFMCI, MCSRRs on E200 */
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#else
-	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#endif
-
-	/* Data Storage Interrupt */
-	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	ori	r11, r11, TASK_SIZE@l
-	cmplw	0, r10, r11
-	bge	2f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	FIND_PTE
-
-	/* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
-	andi.	r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
-	cmpwi	0, r13, _PAGE_RW|_PAGE_USER
-	bne	2f			/* Bail if not */
-
-	/* Update 'changed'. */
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
-
-	/* MAS2 not updated as the entry does exist in the tlb, this
-	   fault taken to detect state transition (eg: COW -> DIRTY)
-	 */
-	andi.	r11, r11, _PAGE_HWEXEC
-	rlwimi	r11, r11, 31, 27, 27	/* SX <- _PAGE_HWEXEC */
-	ori     r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
-
-	/* update search PID in MAS6, AS = 0 */
-	mfspr	r12, SPRN_PID0
-	slwi	r12, r12, 16
-	mtspr	SPRN_MAS6, r12
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	0, r10
-
-	/* only update the perm bits, assume the RPN is fine */
-	mfspr	r12, SPRN_MAS3
-	rlwimi	r12, r11, 0, 20, 31
-	mtspr	SPRN_MAS3,r12
-	tlbwe
-
-	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction Storage Interrupt */
-	INSTRUCTION_STORAGE_EXCEPTION
-
-	/* External Input Interrupt */
-	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
-
-	/* Alignment Interrupt */
-	ALIGNMENT_EXCEPTION
-
-	/* Program Interrupt */
-	PROGRAM_EXCEPTION
-
-	/* Floating Point Unavailable Interrupt */
-#ifdef CONFIG_PPC_FPU
-	FP_UNAVAILABLE_EXCEPTION
-#else
-#ifdef CONFIG_E200
-	/* E200 treats 'normal' floating point instructions as FP Unavail exception */
-	EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE)
-#else
-	EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
-#endif
-#endif
-
-	/* System Call Interrupt */
-	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
-
-	/* Auxillary Processor Unavailable Interrupt */
-	EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
-
-	/* Decrementer Interrupt */
-	DECREMENTER_EXCEPTION
-
-	/* Fixed Internal Timer Interrupt */
-	/* TODO: Add FIT support */
-	EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
-
-	/* Watchdog Timer Interrupt */
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception)
-#endif
-
-	/* Data TLB Error Interrupt */
-	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	ori	r11, r11, TASK_SIZE@l
-	cmplw	5, r10, r11
-	blt	5, 3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MAS1		/* Set TID to 0 */
-	rlwinm	r12,r12,0,16,1
-	mtspr	SPRN_MAS1,r12
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-4:
-	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-#ifdef CONFIG_PTE_64BIT
-	lwz	r13, 0(r12)
-#endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
-
-	 /* Jump to common tlb load */
-	b	finish_tlb_load
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction TLB Error Interrupt */
-	/*
-	 * Nearly the same as above, except we get our
-	 * information from different registers and bailout
-	 * to a different point.
-	 */
-	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	ori	r11, r11, TASK_SIZE@l
-	cmplw	5, r10, r11
-	blt	5, 3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MAS1		/* Set TID to 0 */
-	rlwinm	r12,r12,0,16,1
-	mtspr	SPRN_MAS1,r12
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-4:
-	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-#ifdef CONFIG_PTE_64BIT
-	lwz	r13, 0(r12)
-#endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
-
-	/* Jump to common TLB load point */
-	b	finish_tlb_load
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionStorage
-
-#ifdef CONFIG_SPE
-	/* SPE Unavailable */
-	START_EXCEPTION(SPEUnavailable)
-	NORMAL_EXCEPTION_PROLOG
-	bne	load_up_spe
-	addi    r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x2010, KernelSPE)
-#else
-	EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_SPE */
-
-	/* SPE Floating Point Data */
-#ifdef CONFIG_SPE
-	EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
-#else
-	EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_SPE */
-
-	/* SPE Floating Point Round */
-	EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE)
-
-	/* Performance Monitor */
-	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
-
-
-	/* Debug Interrupt */
-	DEBUG_EXCEPTION
-
-/*
- * Local functions
- */
-
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
-	bne	1f
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-1:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
-
-/*
-
- * Both the instruction and data TLB miss get to this
- * point to load the TLB.
- * 	r10 - EA of fault
- * 	r11 - TLB (info from Linux PTE)
- * 	r12, r13 - available to use
- * 	CR5 - results of addr < TASK_SIZE
- *	MAS0, MAS1 - loaded with proper value when we get here
- *	MAS2, MAS3 - will need additional info from Linux PTE
- *	Upon exit, we reload everything and RFI.
- */
-finish_tlb_load:
-	/*
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-
-	mfspr	r12, SPRN_MAS2
-#ifdef CONFIG_PTE_64BIT
-	rlwimi	r12, r11, 26, 24, 31	/* extract ...WIMGE from pte */
-#else
-	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
-#endif
-	mtspr	SPRN_MAS2, r12
-
-	bge	5, 1f
-
-	/* is user addr */
-	andi.	r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
-	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
-	srwi	r10, r12, 1
-	or	r12, r12, r10	/* Copy user perms into supervisor */
-	iseleq	r12, 0, r12
-	b	2f
-
-	/* is kernel addr */
-1:	rlwinm	r12, r11, 31, 29, 29	/* Extract _PAGE_HWWRITE into SW */
-	ori	r12, r12, (MAS3_SX | MAS3_SR)
-
-#ifdef CONFIG_PTE_64BIT
-2:	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
-	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
-	mtspr	SPRN_MAS3, r12
-BEGIN_FTR_SECTION
-	srwi	r10, r13, 8		/* grab RPN[8:31] */
-	mtspr	SPRN_MAS7, r10
-END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS)
-#else
-2:	rlwimi	r11, r12, 0, 20, 31	/* Extract RPN from PTE and merge with perms */
-	mtspr	SPRN_MAS3, r11
-#endif
-#ifdef CONFIG_E200
-	/* Round robin TLB1 entries assignment */
-	mfspr	r12, SPRN_MAS0
-
-	/* Extract TLB1CFG(NENTRY) */
-	mfspr	r11, SPRN_TLB1CFG
-	andi.	r11, r11, 0xfff
-
-	/* Extract MAS0(NV) */
-	andi.	r13, r12, 0xfff
-	addi	r13, r13, 1
-	cmpw	0, r13, r11
-	addi	r12, r12, 1
-
-	/* check if we need to wrap */
-	blt	7f
-
-	/* wrap back to first free tlbcam entry */
-	lis	r13, tlbcam_index@ha
-	lwz	r13, tlbcam_index@l(r13)
-	rlwimi	r12, r13, 0, 20, 31
-7:
-	mtspr   SPRN_MAS0,r12
-#endif /* CONFIG_E200 */
-
-	tlbwe
-
-	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi					/* Force context change */
-
-#ifdef CONFIG_SPE
-/* Note that the SPE support is closely modeled after the AltiVec
- * support.  Changes to one are likely to be applicable to the
- * other!  */
-load_up_spe:
-/*
- * Disable SPE for the task which had SPE previously,
- * and save its SPE registers in its thread_struct.
- * Enables SPE for use in the kernel on return.
- * On SMP we know the SPE units are free, since we give it up every
- * switch.  -- Kumar
- */
-	mfmsr	r5
-	oris	r5,r5,MSR_SPE@h
-	mtmsr	r5			/* enable use of SPE now */
-	isync
-/*
- * For SMP, we don't do lazy SPE switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_spe in switch_to.
- */
-#ifndef CONFIG_SMP
-	lis	r3,last_task_used_spe@ha
-	lwz	r4,last_task_used_spe@l(r3)
-	cmpi	0,r4,0
-	beq	1f
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_spe */
-	SAVE_32EVRS(0,r10,r4)
-   	evxor	evr10, evr10, evr10	/* clear out evr10 */
-	evmwumiaa evr10, evr10, evr10	/* evr10 <- ACC = 0 * 0 + ACC */
-	li	r5,THREAD_ACC
-   	evstddx	evr10, r4, r5		/* save off accumulator */
-	lwz	r5,PT_REGS(r4)
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_SPE@h
-	andc	r4,r4,r10	/* disable SPE for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of SPE after return */
-	oris	r9,r9,MSR_SPE@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
-	li	r4,1
-	li	r10,THREAD_ACC
-	stw	r4,THREAD_USED_SPE(r5)
-	evlddx	evr4,r10,r5
-	evmra	evr4,evr4
-	REST_32EVRS(0,r10,r5)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	stw	r4,last_task_used_spe@l(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-2:	REST_4GPRS(3, r11)
-	lwz	r10,_CCR(r11)
-	REST_GPR(1, r11)
-	mtcr	r10
-	lwz	r10,_LINK(r11)
-	mtlr	r10
-	REST_GPR(10, r11)
-	mtspr	SPRN_SRR1,r9
-	mtspr	SPRN_SRR0,r12
-	REST_GPR(9, r11)
-	REST_GPR(12, r11)
-	lwz	r11,GPR11(r11)
-	rfi
-
-/*
- * SPE unavailable trap from kernel - print a message, but let
- * the task use SPE in the kernel until it returns to user mode.
- */
-KernelSPE:
-	lwz	r3,_MSR(r1)
-	oris	r3,r3,MSR_SPE@h
-	stw	r3,_MSR(r1)	/* enable use of SPE after return */
-	lis	r3,87f@h
-	ori	r3,r3,87f@l
-	mr	r4,r2		/* current */
-	lwz	r5,_NIP(r1)
-	bl	printk
-	b	ret_from_except
-87:	.string	"SPE used in kernel  (task=%p, pc=%x)  \n"
-	.align	4,0
-
-#endif /* CONFIG_SPE */
-
-/*
- * Global functions
- */
-
-/*
- * extern void loadcam_entry(unsigned int index)
- *
- * Load TLBCAM[index] entry in to the L2 CAM MMU
- */
-_GLOBAL(loadcam_entry)
-	lis	r4,TLBCAM@ha
-	addi	r4,r4,TLBCAM@l
-	mulli	r5,r3,20
-	add	r3,r5,r4
-	lwz	r4,0(r3)
-	mtspr	SPRN_MAS0,r4
-	lwz	r4,4(r3)
-	mtspr	SPRN_MAS1,r4
-	lwz	r4,8(r3)
-	mtspr	SPRN_MAS2,r4
-	lwz	r4,12(r3)
-	mtspr	SPRN_MAS3,r4
-	tlbwe
-	isync
-	blr
-
-/*
- * extern void giveup_altivec(struct task_struct *prev)
- *
- * The e500 core does not have an AltiVec unit.
- */
-_GLOBAL(giveup_altivec)
-	blr
-
-#ifdef CONFIG_SPE
-/*
- * extern void giveup_spe(struct task_struct *prev)
- *
- */
-_GLOBAL(giveup_spe)
-	mfmsr	r5
-	oris	r5,r5,MSR_SPE@h
-	mtmsr	r5			/* enable use of SPE now */
-	isync
-	cmpi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpi	0,r5,0
-	SAVE_32EVRS(0, r4, r3)
-   	evxor	evr6, evr6, evr6	/* clear out evr6 */
-	evmwumiaa evr6, evr6, evr6	/* evr6 <- ACC = 0 * 0 + ACC */
-	li	r4,THREAD_ACC
-   	evstddx	evr6, r4, r3		/* save off accumulator */
-	mfspr	r6,SPRN_SPEFSCR
-	stw	r6,THREAD_SPEFSCR(r3)	/* save spefscr register value */
-	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_SPE@h
-	andc	r4,r4,r3		/* disable SPE for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_spe@ha
-	stw	r5,last_task_used_spe@l(r4)
-#endif /* CONFIG_SMP */
-	blr
-#endif /* CONFIG_SPE */
-
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * Not all FSL Book-E cores have an FPU
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
-/*
- * extern void abort(void)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(abort)
-	li	r13,0
-        mtspr   SPRN_DBCR0,r13		/* disable all debug events */
-	isync
-	mfmsr	r13
-	ori	r13,r13,MSR_DE@l	/* Enable Debug Events */
-	mtmsr	r13
-	isync
-        mfspr   r13,SPRN_DBCR0
-        lis	r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h
-        mtspr   SPRN_DBCR0,r13
-	isync
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r4, 0x4(r5)
-#endif
-	mtspr	SPRN_PID,r3
-	isync			/* Force context change */
-	blr
-
-/*
- * We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
-	.globl	exception_stack_top
-exception_stack_top:
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/*
- * Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index e0c850d85c53..d5e0dfc9ffec 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -165,24 +165,7 @@ _GLOBAL(_tlbia)
 	ble	1b
 
 	isync
-#elif defined(CONFIG_FSL_BOOKE)
-	/* Invalidate all entries in TLB0 */
-	li	r3, 0x04
-	tlbivax	0,3
-	/* Invalidate all entries in TLB1 */
-	li	r3, 0x0c
-	tlbivax	0,3
-	/* Invalidate all entries in TLB2 */
-	li	r3, 0x14
-	tlbivax	0,3
-	/* Invalidate all entries in TLB3 */
-	li	r3, 0x1c
-	tlbivax	0,3
-	msync
-#ifdef CONFIG_SMP
-	tlbsync
-#endif /* CONFIG_SMP */
-#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#else /* !(CONFIG_40x || CONFIG_44x) */
 #if defined(CONFIG_SMP)
 	rlwinm	r8,r1,0,0,18
 	lwz	r8,TI_CPU(r8)
@@ -268,20 +251,7 @@ _GLOBAL(_tlbie)
 	tlbwe	r3, r3, PPC44x_TLB_PAGEID
 	isync
 10:
-#elif defined(CONFIG_FSL_BOOKE)
-	rlwinm	r4, r3, 0, 0, 19
-	ori	r5, r4, 0x08	/* TLBSEL = 1 */
-	ori	r6, r4, 0x10	/* TLBSEL = 2 */
-	ori	r7, r4, 0x18	/* TLBSEL = 3 */
-	tlbivax	0, r4
-	tlbivax	0, r5
-	tlbivax	0, r6
-	tlbivax	0, r7
-	msync
-#if defined(CONFIG_SMP)
-	tlbsync
-#endif /* CONFIG_SMP */
-#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#else /* !(CONFIG_40x || CONFIG_44x) */
 #if defined(CONFIG_SMP)
 	rlwinm	r8,r1,0,0,18
 	lwz	r8,TI_CPU(r8)
@@ -338,18 +308,6 @@ _GLOBAL(flush_instruction_cache)
 	lis	r3, KERNELBASE@h
 	iccci	0,r3
 #endif
-#elif CONFIG_FSL_BOOKE
-BEGIN_FTR_SECTION
-	mfspr   r3,SPRN_L1CSR0
-	ori     r3,r3,L1CSR0_CFI|L1CSR0_CLFC
-	/* msync; isync recommended here */
-	mtspr   SPRN_L1CSR0,r3
-	isync
-	blr
-END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
-	mfspr	r3,SPRN_L1CSR1
-	ori	r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
-	mtspr	SPRN_L1CSR1,r3
 #else
 	mfspr	r3,SPRN_PVR
 	rlwinm	r3,r3,16,16,31
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index ba729ce2071c..c35350250cfc 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -166,12 +166,6 @@ EXPORT_SYMBOL(last_task_used_altivec);
 #endif
 EXPORT_SYMBOL(giveup_altivec);
 #endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-#ifndef CONFIG_SMP
-EXPORT_SYMBOL(last_task_used_spe);
-#endif
-EXPORT_SYMBOL(giveup_spe);
-#endif /* CONFIG_SPE */
 #ifdef CONFIG_SMP
 EXPORT_SYMBOL(smp_call_function);
 EXPORT_SYMBOL(smp_hw_index);
@@ -244,7 +238,7 @@ EXPORT_SYMBOL(debugger_fault_handler);
 EXPORT_SYMBOL(cpm_install_handler);
 EXPORT_SYMBOL(cpm_free_handler);
 #endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx) || defined(CONFIG_40x) || defined(CONFIG_85xx)
+#if defined(CONFIG_8xx) || defined(CONFIG_40x)
 EXPORT_SYMBOL(__res);
 #endif
 
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 5888ae6a4ac8..d51368d72e39 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -38,8 +38,7 @@
 #include <asm/xmon.h>
 #include <asm/ocp.h>
 
-#define USES_PPC_SYS (defined(CONFIG_85xx) || \
-		      defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
+#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
 		      defined(CONFIG_PPC_MPC52xx))
 
 #if USES_PPC_SYS
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index 25a1085fbd01..a467a429c2fe 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -194,11 +194,7 @@ static inline int check_io_access(struct pt_regs *regs)
 /* On 4xx, the reason for the machine check or program exception
    is in the ESR. */
 #define get_reason(regs)	((regs)->dsisr)
-#ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
-#else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
-#endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
 #define REASON_PRIVILEGED	ESR_PPR
@@ -281,66 +277,6 @@ int machine_check_440A(struct pt_regs *regs)
 	}
 	return 0;
 }
-#elif defined(CONFIG_E500)
-int machine_check_e500(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	printk("Caused by (from MCSR=%lx): ", reason);
-
-	if (reason & MCSR_MCP)
-		printk("Machine Check Signal\n");
-	if (reason & MCSR_ICPERR)
-		printk("Instruction Cache Parity Error\n");
-	if (reason & MCSR_DCP_PERR)
-		printk("Data Cache Push Parity Error\n");
-	if (reason & MCSR_DCPERR)
-		printk("Data Cache Parity Error\n");
-	if (reason & MCSR_BUS_IAERR)
-		printk("Bus - Instruction Address Error\n");
-	if (reason & MCSR_BUS_RAERR)
-		printk("Bus - Read Address Error\n");
-	if (reason & MCSR_BUS_WAERR)
-		printk("Bus - Write Address Error\n");
-	if (reason & MCSR_BUS_IBERR)
-		printk("Bus - Instruction Data Error\n");
-	if (reason & MCSR_BUS_RBERR)
-		printk("Bus - Read Data Bus Error\n");
-	if (reason & MCSR_BUS_WBERR)
-		printk("Bus - Read Data Bus Error\n");
-	if (reason & MCSR_BUS_IPERR)
-		printk("Bus - Instruction Parity Error\n");
-	if (reason & MCSR_BUS_RPERR)
-		printk("Bus - Read Parity Error\n");
-
-	return 0;
-}
-#elif defined(CONFIG_E200)
-int machine_check_e200(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	printk("Caused by (from MCSR=%lx): ", reason);
-
-	if (reason & MCSR_MCP)
-		printk("Machine Check Signal\n");
-	if (reason & MCSR_CP_PERR)
-		printk("Cache Push Parity Error\n");
-	if (reason & MCSR_CPERR)
-		printk("Cache Parity Error\n");
-	if (reason & MCSR_EXCP_ERR)
-		printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n");
-	if (reason & MCSR_BUS_IRERR)
-		printk("Bus - Read Bus Error on instruction fetch\n");
-	if (reason & MCSR_BUS_DRERR)
-		printk("Bus - Read Bus Error on data load\n");
-	if (reason & MCSR_BUS_WRERR)
-		printk("Bus - Write Bus Error on buffered store or cache line push\n");
-
-	return 0;
-}
 #else
 int machine_check_generic(struct pt_regs *regs)
 {
@@ -866,63 +802,6 @@ void altivec_assist_exception(struct pt_regs *regs)
 }
 #endif /* CONFIG_ALTIVEC */
 
-#ifdef CONFIG_E500
-void performance_monitor_exception(struct pt_regs *regs)
-{
-	perf_irq(regs);
-}
-#endif
-
-#ifdef CONFIG_FSL_BOOKE
-void CacheLockingException(struct pt_regs *regs, unsigned long address,
-			   unsigned long error_code)
-{
-	/* We treat cache locking instructions from the user
-	 * as priv ops, in the future we could try to do
-	 * something smarter
-	 */
-	if (error_code & (ESR_DLK|ESR_ILK))
-		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
-	return;
-}
-#endif /* CONFIG_FSL_BOOKE */
-
-#ifdef CONFIG_SPE
-void SPEFloatingPointException(struct pt_regs *regs)
-{
-	unsigned long spefscr;
-	int fpexc_mode;
-	int code = 0;
-
-	spefscr = current->thread.spefscr;
-	fpexc_mode = current->thread.fpexc_mode;
-
-	/* Hardware does not necessarily set sticky
-	 * underflow/overflow/invalid flags */
-	if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) {
-		code = FPE_FLTOVF;
-		spefscr |= SPEFSCR_FOVFS;
-	}
-	else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) {
-		code = FPE_FLTUND;
-		spefscr |= SPEFSCR_FUNFS;
-	}
-	else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV))
-		code = FPE_FLTDIV;
-	else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) {
-		code = FPE_FLTINV;
-		spefscr |= SPEFSCR_FINVS;
-	}
-	else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES))
-		code = FPE_FLTRES;
-
-	current->thread.spefscr = spefscr;
-
-	_exception(SIGFPE, regs, code, regs->nip);
-	return;
-}
-#endif
-
 #ifdef CONFIG_BOOKE_WDT
 /*
  * Default handler for a Watchdog exception,
diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile
index cd3eae147cf8..691ba2bae05d 100644
--- a/arch/ppc/mm/Makefile
+++ b/arch/ppc/mm/Makefile
@@ -8,4 +8,3 @@ obj-y				:= fault.o init.o mem_pieces.o \
 obj-$(CONFIG_PPC_STD_MMU)	+= hashtable.o ppc_mmu.o tlb.o
 obj-$(CONFIG_40x)		+= 4xx_mmu.o
 obj-$(CONFIG_44x)		+= 44x_mmu.o
-obj-$(CONFIG_FSL_BOOKE)		+= fsl_booke_mmu.o
diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c
deleted file mode 100644
index 123da03ab118..000000000000
--- a/arch/ppc/mm/fsl_booke_mmu.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
- * E500 Book E processors.
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-extern void loadcam_entry(unsigned int index);
-unsigned int tlbcam_index;
-unsigned int num_tlbcam_entries;
-static unsigned long __cam0, __cam1, __cam2;
-extern unsigned long total_lowmem;
-extern unsigned long __max_low_memory;
-#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
-
-#define NUM_TLBCAMS	(16)
-
-struct tlbcam {
-   	u32	MAS0;
-	u32	MAS1;
-	u32	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-} TLBCAM[NUM_TLBCAMS];
-
-struct tlbcamrange {
-   	unsigned long start;
-	unsigned long limit;
-	phys_addr_t phys;
-} tlbcam_addrs[NUM_TLBCAMS];
-
-extern unsigned int tlbcam_index;
-
-/*
- * Return PA for this VA if it is mapped by a CAM, or 0
- */
-unsigned long v_mapped_by_tlbcam(unsigned long va)
-{
-	int b;
-	for (b = 0; b < tlbcam_index; ++b)
-		if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit)
-			return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start);
-	return 0;
-}
-
-/*
- * Return VA for a given PA or 0 if not mapped
- */
-unsigned long p_mapped_by_tlbcam(unsigned long pa)
-{
-	int b;
-	for (b = 0; b < tlbcam_index; ++b)
-		if (pa >= tlbcam_addrs[b].phys
-	    	    && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
-		              +tlbcam_addrs[b].phys)
-			return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
-	return 0;
-}
-
-/*
- * Set up one of the I/D BAT (block address translation) register pairs.
- * The parameters are not checked; in particular size must be a power
- * of 4 between 4k and 256M.
- */
-void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		unsigned int size, int flags, unsigned int pid)
-{
-	unsigned int tsize, lz;
-
-	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
-	tsize = (21 - lz) / 2;
-
-#ifdef CONFIG_SMP
-	if ((flags & _PAGE_NO_CACHE) == 0)
-		flags |= _PAGE_COHERENT;
-#endif
-
-	TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1);
-	TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
-	TLBCAM[index].MAS2 = virt & PAGE_MASK;
-
-	TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0;
-	TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0;
-	TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0;
-	TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
-	TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
-
-	TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
-	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
-
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
-	if (flags & _PAGE_USER) {
-	   TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
-	   TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
-	}
-#else
-	TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
-	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
-#endif
-
-	tlbcam_addrs[index].start = virt;
-	tlbcam_addrs[index].limit = virt + size - 1;
-	tlbcam_addrs[index].phys = phys;
-
-	loadcam_entry(index);
-}
-
-void invalidate_tlbcam_entry(int index)
-{
-	TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
-	TLBCAM[index].MAS1 = ~MAS1_VALID;
-
-	loadcam_entry(index);
-}
-
-void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
-		unsigned long cam2)
-{
-	settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
-	tlbcam_index++;
-	if (cam1) {
-		tlbcam_index++;
-		settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
-	}
-	if (cam2) {
-		tlbcam_index++;
-		settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
-	}
-}
-
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
-	flush_instruction_cache();
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	cam_mapin_ram(__cam0, __cam1, __cam2);
-
-	return __cam0 + __cam1 + __cam2;
-}
-
-
-void __init
-adjust_total_lowmem(void)
-{
-	unsigned long max_low_mem = MAX_LOW_MEM;
-	unsigned long cam_max = 0x10000000;
-	unsigned long ram;
-
-	/* adjust CAM size to max_low_mem */
-	if (max_low_mem < cam_max)
-		cam_max = max_low_mem;
-
-	/* adjust lowmem size to max_low_mem */
-	if (max_low_mem < total_lowmem)
-		ram = max_low_mem;
-	else
-		ram = total_lowmem;
-
-	/* Calculate CAM values */
-	__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
-	if (__cam0 > cam_max)
-		__cam0 = cam_max;
-	ram -= __cam0;
-	if (ram) {
-		__cam1 = 1UL << 2 * (__ilog2(ram) / 2);
-		if (__cam1 > cam_max)
-			__cam1 = cam_max;
-		ram -= __cam1;
-	}
-	if (ram) {
-		__cam2 = 1UL << 2 * (__ilog2(ram) / 2);
-		if (__cam2 > cam_max)
-			__cam2 = cam_max;
-		ram -= __cam2;
-	}
-
-	printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
-			" CAM2=%ldMb residual: %ldMb\n",
-			__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
-			(total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
-	__max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
-}
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index dd898d32480e..7444df3889c5 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -241,12 +241,6 @@ void __init MMU_init(void)
 	if (__max_memory && total_memory > __max_memory)
 		total_memory = __max_memory;
 	total_lowmem = total_memory;
-#ifdef CONFIG_FSL_BOOKE
-	/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
-	 * entries, so we need to adjust lowmem to match the amount we can map
-	 * in the fixed entries */
-	adjust_total_lowmem();
-#endif /* CONFIG_FSL_BOOKE */
 	if (total_lowmem > __max_low_memory) {
 		total_lowmem = __max_low_memory;
 #ifndef CONFIG_HIGHMEM
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
index b298b60c202f..5f813e386b87 100644
--- a/arch/ppc/mm/mmu_decl.h
+++ b/arch/ppc/mm/mmu_decl.h
@@ -58,12 +58,6 @@ extern unsigned int num_tlbcam_entries;
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(void);
 
-#elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-extern void adjust_total_lowmem(void);
-
 #else
 /* anything except 4xx or 8xx */
 extern void MMU_init_hw(void);
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 1f51e6c94507..fadacfd18806 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -42,10 +42,6 @@ int io_bat_index;
 #define HAVE_BATS	1
 #endif
 
-#if defined(CONFIG_FSL_BOOKE)
-#define HAVE_TLBCAM	1
-#endif
-
 extern char etext[], _stext[];
 
 #ifdef CONFIG_SMP
@@ -63,15 +59,6 @@ void setbat(int index, unsigned long virt, unsigned long phys,
 #define p_mapped_by_bats(x)	(0UL)
 #endif /* HAVE_BATS */
 
-#ifdef HAVE_TLBCAM
-extern unsigned int tlbcam_index;
-extern unsigned long v_mapped_by_tlbcam(unsigned long va);
-extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
-#else /* !HAVE_TLBCAM */
-#define v_mapped_by_tlbcam(x)	(0UL)
-#define p_mapped_by_tlbcam(x)	(0UL)
-#endif /* HAVE_TLBCAM */
-
 #ifdef CONFIG_PTE_64BIT
 /* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
 #define PGDIR_ORDER	1
@@ -213,9 +200,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
 		goto out;
 
-	if ((v = p_mapped_by_tlbcam(p)))
-		goto out;
-
 	if (mem_init_done) {
 		struct vm_struct *area;
 		area = get_vm_area(size, VM_IOREMAP);
@@ -341,18 +325,6 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
 	}
 #endif /* HAVE_BATS */
 
-#ifdef HAVE_TLBCAM
-	/*
-	 * Use a CAM for this if possible...
-	 */
-	if (tlbcam_index < num_tlbcam_entries && is_power_of_4(size)
-	    && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
-		settlbcam(tlbcam_index, virt, phys, size, flags, 0);
-		++tlbcam_index;
-		return;
-	}
-#endif /* HAVE_TLBCAM */
-
 	/* No BATs available, put it in the page tables. */
 	for (i = 0; i < size; i += PAGE_SIZE)
 		map_page(virt + i, phys + i, flags);
diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig
deleted file mode 100644
index 6f2d0add7de6..000000000000
--- a/arch/ppc/platforms/85xx/Kconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-config 85xx
-	bool
-	depends on E500
-	default y
-
-config PPC_INDIRECT_PCI_BE
-	bool
-	depends on 85xx
-	default y
-
-menu "Freescale 85xx options"
-	depends on E500
-
-choice
-	prompt "Machine Type"
-	depends on 85xx
-	default MPC8540_ADS
-
-config MPC8540_ADS
-	bool "Freescale MPC8540 ADS"
-	help
-	  This option enables support for the MPC 8540 ADS evaluation board.
-
-config MPC8548_CDS
-	bool "Freescale MPC8548 CDS"
-	help
-	  This option enables support for the MPC8548 CDS evaluation board.
-
-config MPC8555_CDS
-	bool "Freescale MPC8555 CDS"
-	help
-	  This option enables support for the MPC8555 CDS evaluation board.
-
-config MPC8560_ADS
-	bool "Freescale MPC8560 ADS"
-	help
-	  This option enables support for the MPC 8560 ADS evaluation board.
-
-config SBC8560
-	bool "WindRiver PowerQUICC III SBC8560"
-	help
-	  This option enables support for the WindRiver PowerQUICC III
-	  SBC8560 board.
-
-config STX_GP3
-	bool "Silicon Turnkey Express GP3"
-	help
-	  This option enables support for the Silicon Turnkey Express GP3
-	  board.
-
-config TQM8540
-	bool "TQ Components TQM8540"
-	help
-	  This option enables support for the TQ Components TQM8540 board.
-
-config TQM8541
-	bool "TQ Components TQM8541"
-	help
-	  This option enables support for the TQ Components TQM8541 board.
-
-config TQM8555
-	bool "TQ Components TQM8555"
-	help
-	  This option enables support for the TQ Components TQM8555 board.
-
-config TQM8560
-	bool "TQ Components TQM8560"
-	help
-	  This option enables support for the TQ Components TQM8560 board.
-
-endchoice
-
-# It's often necessary to know the specific 85xx processor type.
-# Fortunately, it is implied (so far) from the board type, so we
-# don't need to ask more redundant questions.
-config MPC8540
-	bool
-	depends on MPC8540_ADS || TQM8540
-	default y
-
-config MPC8548
-	bool
-	depends on MPC8548_CDS
-	default y
-
-config MPC8555
-	bool
-	depends on MPC8555_CDS || TQM8541 || TQM8555
-	default y
-
-config MPC8560
-	bool
-	depends on SBC8560 || MPC8560_ADS || STX_GP3 || TQM8560
-	default y
-
-config 85xx_PCI2
-	bool "Support for 2nd PCI host controller"
-	depends on MPC8555_CDS
-	default y
-
-config PPC_GEN550
-	bool
-	depends on MPC8540 || SBC8560 || MPC8555
-	default y
-
-endmenu
diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile
deleted file mode 100644
index 6c4753c144d3..000000000000
--- a/arch/ppc/platforms/85xx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the PowerPC 85xx linux kernel.
-#
-obj-$(CONFIG_MPC8540_ADS)	+= mpc85xx_ads_common.o mpc8540_ads.o
-obj-$(CONFIG_MPC8548_CDS)	+= mpc85xx_cds_common.o
-obj-$(CONFIG_MPC8555_CDS)	+= mpc85xx_cds_common.o
-obj-$(CONFIG_MPC8560_ADS)	+= mpc85xx_ads_common.o mpc8560_ads.o
-obj-$(CONFIG_SBC8560)		+= sbc85xx.o sbc8560.o
-obj-$(CONFIG_STX_GP3)		+= stx_gp3.o
-obj-$(CONFIG_TQM8540)		+= tqm85xx.o
-obj-$(CONFIG_TQM8541)		+= tqm85xx.o
-obj-$(CONFIG_TQM8555)		+= tqm85xx.o
-obj-$(CONFIG_TQM8560)		+= tqm85xx.o
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
deleted file mode 100644
index 00a3ba57063f..000000000000
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * MPC8540ADS board specific routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/ppc85xx_setup.h>
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-mpc8540ads_setup_arch(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-	struct gianfar_platform_data *pdata;
-	struct gianfar_mdio_data *mdata;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc8540ads_setup_arch()", 0);
-
-	/* Set loops_per_jiffy to a half-way reasonable value,
-	   for use until calibrate_delay gets called. */
-	loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
-	/* setup PCI host bridges */
-	mpc85xx_setup_hose();
-#endif
-
-#ifdef CONFIG_SERIAL_8250
-	mpc85xx_early_serial_map();
-#endif
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/* Invalidate the entry we stole earlier the serial ports
-	 * should be properly mapped */
-	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-
-	/* setup the board related info for the MDIO bus */
-	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
-	mdata->irq[0] = MPC85xx_IRQ_EXT5;
-	mdata->irq[1] = MPC85xx_IRQ_EXT5;
-	mdata->irq[2] = PHY_POLL;
-	mdata->irq[3] = MPC85xx_IRQ_EXT5;
-	mdata->irq[31] = PHY_POLL;
-
-	/* setup the board related information for the enet controllers */
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 0;
-		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 1;
-		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
-	if (pdata) {
-		pdata->board_flags = 0;
-		pdata->bus_id = 0;
-		pdata->phy_id = 3;
-		memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-}
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	/* parse_bootinfo must always be called first */
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3) {
-		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
-		       sizeof (bd_t));
-	}
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	{
-		bd_t *binfo = (bd_t *) __res;
-		struct uart_port p;
-
-		/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
-		settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
-			  binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
-
-		memset(&p, 0, sizeof (p));
-		p.iotype = UPIO_MEM;
-		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
-		p.uartclk = binfo->bi_busfreq;
-
-		gen550_init(0, &p);
-
-		memset(&p, 0, sizeof (p));
-		p.iotype = UPIO_MEM;
-		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
-		p.uartclk = binfo->bi_busfreq;
-
-		gen550_init(1, &p);
-	}
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* setup the PowerPC module struct */
-	ppc_md.setup_arch = mpc8540ads_setup_arch;
-	ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
-
-	ppc_md.init_IRQ = mpc85xx_ads_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = mpc85xx_restart;
-	ppc_md.power_off = mpc85xx_power_off;
-	ppc_md.halt = mpc85xx_halt;
-
-	ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif	/* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
-	ppc_md.early_serial_map = mpc85xx_early_serial_map;
-#endif	/* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc8540ads_init(): exit", 0);
-
-	return;
-}
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h
deleted file mode 100644
index 7559f9e6fc28..000000000000
--- a/arch/ppc/platforms/85xx/mpc8540_ads.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * MPC8540ADS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC8540ADS_H__
-#define __MACH_MPC8540ADS_H__
-
-#include <linux/initrd.h>
-#include <syslib/ppc85xx_setup.h>
-#include <platforms/85xx/mpc85xx_ads_common.h>
-
-#endif /* __MACH_MPC8540ADS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h
deleted file mode 100644
index 4f79c372c4e7..000000000000
--- a/arch/ppc/platforms/85xx/mpc8555_cds.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * MPC8555CDS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC8555CDS_H__
-#define __MACH_MPC8555CDS_H__
-
-#include <syslib/ppc85xx_setup.h>
-#include <platforms/85xx/mpc85xx_cds_common.h>
-
-#define CPM_MAP_ADDR	(CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#endif /* __MACH_MPC8555CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
deleted file mode 100644
index 3a060468dd95..000000000000
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * MPC8560ADS board specific routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-#include <linux/fs_enet_pd.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <asm/cpm2.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_setup.h>
-
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void init_fcc_ioports(void)
-{
-	struct immap *immap;
-	struct io_port *io;
-	u32 tempval;
-
-	immap = cpm2_immr;
-
-	io = &immap->im_ioport;
-	/* FCC2/3 are on the ports B/C. */
-	tempval = in_be32(&io->iop_pdirb);
-	tempval &= ~PB2_DIRB0;
-	tempval |= PB2_DIRB1;
-	out_be32(&io->iop_pdirb, tempval);
-
-	tempval = in_be32(&io->iop_psorb);
-	tempval &= ~PB2_PSORB0;
-	tempval |= PB2_PSORB1;
-	out_be32(&io->iop_psorb, tempval);
-
-	tempval = in_be32(&io->iop_pparb);
-	tempval |= (PB2_DIRB0 | PB2_DIRB1);
-	out_be32(&io->iop_pparb, tempval);
-
-	tempval = in_be32(&io->iop_pdirb);
-	tempval &= ~PB3_DIRB0;
-	tempval |= PB3_DIRB1;
-	out_be32(&io->iop_pdirb, tempval);
-
-	tempval = in_be32(&io->iop_psorb);
-	tempval &= ~PB3_PSORB0;
-	tempval |= PB3_PSORB1;
-	out_be32(&io->iop_psorb, tempval);
-
-	tempval = in_be32(&io->iop_pparb);
-	tempval |= (PB3_DIRB0 | PB3_DIRB1);
-	out_be32(&io->iop_pparb, tempval);
-
-        tempval = in_be32(&io->iop_pdirc);
-        tempval |= PC3_DIRC1;
-        out_be32(&io->iop_pdirc, tempval);
-
-        tempval = in_be32(&io->iop_pparc);
-        tempval |= PC3_DIRC1;
-        out_be32(&io->iop_pparc, tempval);
-
-	/* Port C has clocks......  */
-	tempval = in_be32(&io->iop_psorc);
-	tempval &= ~(CLK_TRX);
-	out_be32(&io->iop_psorc, tempval);
-
-	tempval = in_be32(&io->iop_pdirc);
-	tempval &= ~(CLK_TRX);
-	out_be32(&io->iop_pdirc, tempval);
-	tempval = in_be32(&io->iop_pparc);
-	tempval |= (CLK_TRX);
-	out_be32(&io->iop_pparc, tempval);
-
-	/* Configure Serial Interface clock routing.
-	 * First,  clear all FCC bits to zero,
-	 * then set the ones we want.
-	 */
-	immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK);
-	immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE;
-}
-
-static void __init
-mpc8560ads_setup_arch(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-	struct gianfar_platform_data *pdata;
-	struct gianfar_mdio_data *mdata;
-	struct fs_platform_info *fpi;
-
-	cpm2_reset();
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc8560ads_setup_arch()", 0);
-
-	/* Set loops_per_jiffy to a half-way reasonable value,
-	   for use until calibrate_delay gets called. */
-	loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
-	/* setup PCI host bridges */
-	mpc85xx_setup_hose();
-#endif
-
-	/* setup the board related info for the MDIO bus */
-	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
-	mdata->irq[0] = MPC85xx_IRQ_EXT5;
-	mdata->irq[1] = MPC85xx_IRQ_EXT5;
-	mdata->irq[2] = PHY_POLL;
-	mdata->irq[3] = MPC85xx_IRQ_EXT5;
-	mdata->irq[31] = PHY_POLL;
-
-	/* setup the board related information for the enet controllers */
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 0;
-		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 1;
-		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
-	}
-
-	init_fcc_ioports();
-	ppc_sys_device_remove(MPC85xx_CPM_FCC1);
-
-	fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2);
-	if (fpi) {
-		memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
-		fpi->bus_id = "0:02";
-		fpi->phy_addr = 2;
-		fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
-		fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1];
-	}
-
-	fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3);
-	if (fpi) {
-		memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
-		fpi->macaddr[5] += 1;
-		fpi->bus_id = "0:03";
-		fpi->phy_addr = 3;
-		fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
-		fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2];
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-}
-
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
-	while ((irq = cpm2_get_irq()) >= 0)
-		__do_IRQ(irq);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
-	.handler = cpm2_cascade,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "cpm2_cascade",
-};
-
-static void __init
-mpc8560_ads_init_IRQ(void)
-{
-	/* Setup OpenPIC */
-	mpc85xx_ads_init_IRQ();
-
-	/* Setup CPM2 PIC */
-        cpm2_init_IRQ();
-
-	setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-
-	return;
-}
-
-
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	/* parse_bootinfo must always be called first */
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3) {
-		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
-		       sizeof (bd_t));
-
-	}
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* setup the PowerPC module struct */
-	ppc_md.setup_arch = mpc8560ads_setup_arch;
-	ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
-
-	ppc_md.init_IRQ = mpc8560_ads_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = mpc85xx_restart;
-	ppc_md.power_off = mpc85xx_power_off;
-	ppc_md.halt = mpc85xx_halt;
-
-	ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc8560ads_init(): exit", 0);
-
-	return;
-}
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h
deleted file mode 100644
index 9f185ab2e019..000000000000
--- a/arch/ppc/platforms/85xx/mpc8560_ads.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * MPC8540ADS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC8560ADS_H
-#define __MACH_MPC8560ADS_H
-
-#include <syslib/ppc85xx_setup.h>
-#include <platforms/85xx/mpc85xx_ads_common.h>
-
-#define CPM_MAP_ADDR	(CCSRBAR + MPC85xx_CPM_OFFSET)
-#define PHY_INTERRUPT	MPC85xx_IRQ_EXT7
-
-#endif				/* __MACH_MPC8560ADS_H */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
deleted file mode 100644
index 0706dca5a8ea..000000000000
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * MPC85xx ADS board common routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/ppc_sys.h>
-
-#include <mm/mmu_decl.h>
-
-#include <platforms/85xx/mpc85xx_ads_common.h>
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-#endif
-
-extern unsigned long total_memory;	/* in mm/init */
-
-unsigned char __res[sizeof (bd_t)];
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-	0x0,						/* External  0: */
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 1: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 2: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 3: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 4: PCI slot 3 */
-#else
-	0x0,				/* External  1: */
-	0x0,				/* External  2: */
-	0x0,				/* External  3: */
-	0x0,				/* External  4: */
-#endif
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PHY */
-	0x0,				/* External  6: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 7: PHY */
-	0x0,				/* External  8: */
-	0x0,				/* External  9: */
-	0x0,				/* External 10: */
-	0x0,				/* External 11: */
-};
-
-/* ************************************************************************ */
-int
-mpc85xx_ads_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	uint memsize = total_memory;
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "Machine\t\t: mpc%sads\n", cur_ppc_sys_spec->ppc_sys_name);
-	seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
-	return 0;
-}
-
-void __init
-mpc85xx_ads_init_IRQ(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	/* Determine the Physical Address of the OpenPIC regs */
-	phys_addr_t OpenPIC_PAddr =
-	    binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
-	OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
-	OpenPIC_InitSenses = mpc85xx_ads_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof (mpc85xx_ads_openpic_initsenses);
-
-	/* Skip reserved space and internal sources */
-	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
-	/* we let openpic interrupts starting from an offset, to
-	 * leave space for cascading interrupts underneath.
-	 */
-	openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-	return;
-}
-
-#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     * This is little evil, but works around the fact
-	     * that revA boards have IDSEL starting at 18
-	     * and others boards (older) start at 12
-	     *
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *       A      B      C      D
-	     */
-	{
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 2 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 5 */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 12 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 15 */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 18 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 21 */
-	};
-
-	const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_RAPIDIO
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-void platform_rio_init(void)
-{
-	/* 512MB RIO LAW at 0xc0000000 */
-	mpc85xx_rio_setup(0xc0000000, 0x20000000);
-}
-#endif /* CONFIG_RAPIDIO */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
deleted file mode 100644
index c8c322fe3680..000000000000
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * MPC85XX ADS common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC85XX_ADS_H__
-#define __MACH_MPC85XX_ADS_H__
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR		((uint)0xe0000000)
-#define BCSR_ADDR		((uint)0xf8000000)
-#define BCSR_SIZE		((uint)(32 * 1024))
-
-struct seq_file;
-
-extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
-extern void mpc85xx_ads_init_IRQ(void) __init;
-extern void mpc85xx_ads_map_io(void) __init;
-
-/* PCI interrupt controller */
-#define PIRQA		MPC85xx_IRQ_EXT1
-#define PIRQB		MPC85xx_IRQ_EXT2
-#define PIRQC		MPC85xx_IRQ_EXT3
-#define PIRQD		MPC85xx_IRQ_EXT4
-
-#define MPC85XX_PCI1_LOWER_IO	0x00000000
-#define MPC85XX_PCI1_UPPER_IO	0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM	0x80000000
-#define MPC85XX_PCI1_UPPER_MEM	0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE	0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET	0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE	0x01000000
-
-/* FCC1 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK9-12 */
-#define F1_RXCLK       12
-#define F1_TXCLK       11
-
-/* FCC2 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK13-16 */
-#define F2_RXCLK       13
-#define F2_TXCLK       14
-
-/* FCC3 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK13-16 */
-#define F3_RXCLK       15
-#define F3_TXCLK       16
-
-
-#endif				/* __MACH_MPC85XX_ADS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
deleted file mode 100644
index 2d59eb776c95..000000000000
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/*
- * MPC85xx CDS board specific routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/cpm2.h>
-#include <asm/ppc_sys.h>
-#include <asm/kgdb.h>
-
-#include <mm/mmu_decl.h>
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_setup.h>
-
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-#endif
-
-extern unsigned long total_memory;      /* in mm/init */
-
-unsigned char __res[sizeof (bd_t)];
-
-static int cds_pci_slot = 2;
-static volatile u8 * cadmus;
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 0: PCI1 slot */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 1: PCI1 slot */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 2: PCI1 slot */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 3: PCI1 slot */
-#else
-	0x0,						/* External  0: */
-	0x0,						/* External  1: */
-	0x0,						/* External  2: */
-	0x0,						/* External  3: */
-#endif
-	0x0,						/* External  4: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External  5: PHY */
-	0x0,						/* External  6: */
-	0x0,						/* External  7: */
-	0x0,						/* External  8: */
-	0x0,						/* External  9: */
-	0x0,						/* External 10: */
-#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 11: PCI2 slot 0 */
-#else
-	0x0,						/* External 11: */
-#endif
-};
-
-/* ************************************************************************ */
-int
-mpc85xx_cds_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	uint memsize = total_memory;
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]);
-	seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
-	return 0;
-}
-
-#ifdef CONFIG_CPM2
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
-	while((irq = cpm2_get_irq()) >= 0)
-		__do_IRQ(irq);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
-	.handler = cpm2_cascade,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "cpm2_cascade",
-};
-#endif /* CONFIG_CPM2 */
-
-void __init
-mpc85xx_cds_init_IRQ(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	int i;
-
-	/* Determine the Physical Address of the OpenPIC regs */
-	phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
-	OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
-	OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
-
-	/* Skip reserved space and internal sources */
-#ifdef CONFIG_MPC8548
-	openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200);
-#else
-	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-#endif
-	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
-	/* we let openpic interrupts starting from an offset, to
-	 * leave space for cascading interrupts underneath.
-	 */
-	openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-#ifdef CONFIG_PCI
-	openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
-
-	i8259_init(0, 0);
-#endif
-
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-        cpm2_init_IRQ();
-
-	setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-#endif
-
-	return;
-}
-
-#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (!hose->index)
-	{
-		/* Handle PCI1 interrupts */
-		char pci_irq_table[][4] =
-			/*
-			 *      PCI IDSEL/INTPIN->INTLINE
-			 *        A      B      C      D
-			 */
-
-			/* Note IRQ assignment for slots is based on which slot the elysium is
-			 * in -- in this setup elysium is in slot #2 (this PIRQA as first
-			 * interrupt on slot */
-		{
-			{ 0, 1, 2, 3 }, /* 16 - PMC */
-			{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
-			{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
-			{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
-			{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
-			{ 3, 0, 1, 2 }, /* 21 - Slot 4 */
-		};
-
-		const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
-		int i, j;
-
-		for (i = 0; i < 6; i++)
-			for (j = 0; j < 4; j++)
-				pci_irq_table[i][j] =
-					((pci_irq_table[i][j] + 5 -
-					  cds_pci_slot) & 0x3) + PIRQ0A;
-
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		/* Handle PCI2 interrupts (if we have one) */
-		char pci_irq_table[][4] =
-		{
-			/*
-			 * We only have one slot and one interrupt
-			 * going to PIRQA - PIRQD */
-			{ PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
-		};
-
-		const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
-
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-#define ARCADIA_HOST_BRIDGE_IDSEL	17
-#define ARCADIA_2ND_BRIDGE_IDSEL	3
-
-extern int mpc85xx_pci1_last_busno;
-
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-#ifdef CONFIG_85xx_PCI2
-	if (mpc85xx_pci1_last_busno)
-		if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-#endif
-	/* We explicitly do not go past the Tundra 320 Bridge */
-	if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-
-void __init
-mpc85xx_cds_enable_via(struct pci_controller *hose)
-{
-	u32 pci_class;
-	u16 vid, did;
-
-	early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
-	if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
-		return;
-
-	/* Configure P2P so that we can reach bus 1 */
-	early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
-	early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
-	early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
-
-	early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
-	early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
-
-	if ((vid != PCI_VENDOR_ID_VIA) ||
-			(did != PCI_DEVICE_ID_VIA_82C686))
-		return;
-
-	/* Enable USB and IDE functions */
-	early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
-}
-
-void __init
-mpc85xx_cds_fixup_via(struct pci_controller *hose)
-{
-	u32 pci_class;
-	u16 vid, did;
-
-	early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
-	if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
-		return;
-
-	/*
-	 * Force the backplane P2P bridge to have a window
-	 * open from 0x00000000-0x00001fff in PCI I/O space.
-	 * This allows legacy I/O (i8259, etc) on the VIA
-	 * southbridge to be accessed.
-	 */
-	early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
-	early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
-	early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
-	early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
-
-	early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
-	early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
-	if ((vid != PCI_VENDOR_ID_VIA) ||
-			(did != PCI_DEVICE_ID_VIA_82C686))
-		return;
-
-	/*
-	 * Since the P2P window was forced to cover the fixed
-	 * legacy I/O addresses, it is necessary to manually
-	 * place the base addresses for the IDE and USB functions
-	 * within this window.
-	 */
-	/* Function 1, IDE */
-	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
-	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
-	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
-	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
-	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
-
-	/* Function 2, USB ports 0-1 */
-	early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
-
-	/* Function 3, USB ports 2-3 */
-	early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
-
-	/* Function 5, Power Management */
-	early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
-	early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
-	early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
-
-	/* Function 6, AC97 Interface */
-	early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
-}
-
-void __init
-mpc85xx_cds_pcibios_fixup(void)
-{
-        struct pci_dev *dev;
-	u_char		c;
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-                                        PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
-                /*
-                 * U-Boot does not set the enable bits
-                 * for the IDE device. Force them on here.
-                 */
-                pci_read_config_byte(dev, 0x40, &c);
-                c |= 0x03; /* IDE: Chip Enable Bits */
-                pci_write_config_byte(dev, 0x40, c);
-
-		/*
-		 * Since only primary interface works, force the
-		 * IDE function to standard primary IDE interrupt
-		 * w/ 8259 offset
-		 */
-                dev->irq = 14;
-                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-		pci_dev_put(dev);
-        }
-
-	/*
-	 * Force legacy USB interrupt routing
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-                                        PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
-                dev->irq = 10;
-                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
-
-		if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-                                        PCI_DEVICE_ID_VIA_82C586_2, dev))) {
-	                dev->irq = 11;
-	                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
-		}
-		pci_dev_put(dev);
-        }
-}
-#endif /* CONFIG_PCI */
-
-TODC_ALLOC();
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-mpc85xx_cds_setup_arch(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-	struct gianfar_platform_data *pdata;
-	struct gianfar_mdio_data *mdata;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	printk("mpc85xx_cds_setup_arch\n");
-
-#ifdef CONFIG_CPM2
-	cpm2_reset();
-#endif
-
-	cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
-	cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
-	printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot);
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE),
-			8);
-
-	/* Set loops_per_jiffy to a half-way reasonable value,
-	   for use until calibrate_delay gets called. */
-	loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
-	/* VIA IDE configuration */
-        ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
-
-	/* setup PCI host bridges */
-	mpc85xx_setup_hose();
-#endif
-
-#ifdef CONFIG_SERIAL_8250
-	mpc85xx_early_serial_map();
-#endif
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/* Invalidate the entry we stole earlier the serial ports
-	 * should be properly mapped */
-	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-
-	/* setup the board related info for the MDIO bus */
-	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
-	mdata->irq[0] = MPC85xx_IRQ_EXT5;
-	mdata->irq[1] = MPC85xx_IRQ_EXT5;
-	mdata->irq[2] = PHY_POLL;
-	mdata->irq[3] = PHY_POLL;
-	mdata->irq[31] = PHY_POLL;
-
-	/* setup the board related information for the enet controllers */
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 0;
-		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 1;
-		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 0;
-		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 1;
-		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
-	}
-
-	ppc_sys_device_remove(MPC85xx_eTSEC3);
-	ppc_sys_device_remove(MPC85xx_eTSEC4);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
-}
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-              unsigned long r6, unsigned long r7)
-{
-	/* parse_bootinfo must always be called first */
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3) {
-		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
-				sizeof (bd_t));
-
-	}
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	{
-		bd_t *binfo = (bd_t *) __res;
-		struct uart_port p;
-
-		/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
-		settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
-				binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
-
-		memset(&p, 0, sizeof (p));
-		p.iotype = UPIO_MEM;
-		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
-		p.uartclk = binfo->bi_busfreq;
-
-		gen550_init(0, &p);
-
-		memset(&p, 0, sizeof (p));
-		p.iotype = UPIO_MEM;
-		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
-		p.uartclk = binfo->bi_busfreq;
-
-		gen550_init(1, &p);
-	}
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* setup the PowerPC module struct */
-	ppc_md.setup_arch = mpc85xx_cds_setup_arch;
-	ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo;
-
-	ppc_md.init_IRQ = mpc85xx_cds_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = mpc85xx_restart;
-	ppc_md.power_off = mpc85xx_power_off;
-	ppc_md.halt = mpc85xx_halt;
-
-	ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
-	ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
-	ppc_md.early_serial_map = mpc85xx_early_serial_map;
-#endif	/* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc85xx_cds_init(): exit", 0);
-
-	return;
-}
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
deleted file mode 100644
index 32c5455c8b82..000000000000
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * MPC85xx CDS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC85XX_CDS_H__
-#define __MACH_MPC85XX_CDS_H__
-
-#include <linux/serial.h>
-#include <asm/ppcboot.h>
-#include <linux/initrd.h>
-#include <syslib/ppc85xx_setup.h>
-
-#define BOARD_CCSRBAR           ((uint)0xe0000000)
-#define CCSRBAR_SIZE            ((uint)1024*1024)
-
-/* CADMUS info */
-#define CADMUS_BASE (0xf8004000)
-#define CADMUS_SIZE (256)
-#define CM_VER	(0)
-#define CM_CSR	(1)
-#define CM_RST	(2)
-
-/* CDS NVRAM/RTC */
-#define CDS_RTC_ADDR	(0xf8000000)
-#define CDS_RTC_SIZE	(8 * 1024)
-
-/* PCI config */
-#define PCI1_CFG_ADDR_OFFSET	(0x8000)
-#define PCI1_CFG_DATA_OFFSET	(0x8004)
-
-#define PCI2_CFG_ADDR_OFFSET	(0x9000)
-#define PCI2_CFG_DATA_OFFSET	(0x9004)
-
-/* PCI interrupt controller */
-#define PIRQ0A                   MPC85xx_IRQ_EXT0
-#define PIRQ0B                   MPC85xx_IRQ_EXT1
-#define PIRQ0C                   MPC85xx_IRQ_EXT2
-#define PIRQ0D                   MPC85xx_IRQ_EXT3
-#define PIRQ1A                   MPC85xx_IRQ_EXT11
-
-/* PCI 1 memory map */
-#define MPC85XX_PCI1_LOWER_IO        0x00000000
-#define MPC85XX_PCI1_UPPER_IO        0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM       0x80000000
-#define MPC85XX_PCI1_UPPER_MEM       0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE         0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET      0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE         0x01000000
-
-/* PCI 2 memory map */
-/* Note: the standard PPC fixups will cause IO space to get bumped by
- * hose->io_base_virt - isa_io_base => MPC85XX_PCI1_IO_SIZE */
-#define MPC85XX_PCI2_LOWER_IO        0x00000000
-#define MPC85XX_PCI2_UPPER_IO        0x00ffffff
-
-#define MPC85XX_PCI2_LOWER_MEM       0xa0000000
-#define MPC85XX_PCI2_UPPER_MEM       0xbfffffff
-
-#define MPC85XX_PCI2_IO_BASE         0xe3000000
-#define MPC85XX_PCI2_MEM_OFFSET      0x00000000
-
-#define MPC85XX_PCI2_IO_SIZE         0x01000000
-
-#define NR_8259_INTS		     16
-#define CPM_IRQ_OFFSET		     NR_8259_INTS
-
-#endif /* __MACH_MPC85XX_CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
deleted file mode 100644
index 3d7addbdecfd..000000000000
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Wind River SBC8560 board specific routines
- * 
- * Maintainer: Kumar Gala
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- * 
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_setup.h>
-
-#ifdef CONFIG_SERIAL_8250
-static void __init
-sbc8560_early_serial_map(void)
-{
-        struct uart_port uart_req;
- 
-        /* Setup serial port access */
-        memset(&uart_req, 0, sizeof (uart_req));
-	uart_req.irq = MPC85xx_IRQ_EXT9;
-	uart_req.flags = STD_COM_FLAGS;
-	uart_req.uartclk = BASE_BAUD * 16;
-        uart_req.iotype = UPIO_MEM;
-        uart_req.mapbase = UARTA_ADDR;
-        uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
-	uart_req.type = PORT_16650;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-        gen550_init(0, &uart_req);
-#endif
- 
-        if (early_serial_setup(&uart_req) != 0)
-                printk("Early serial init of port 0 failed\n");
- 
-        /* Assume early_serial_setup() doesn't modify uart_req */
-	uart_req.line = 1;
-        uart_req.mapbase = UARTB_ADDR;
-        uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART1_SIZE);
-	uart_req.irq = MPC85xx_IRQ_EXT10;
- 
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-        gen550_init(1, &uart_req);
-#endif
- 
-        if (early_serial_setup(&uart_req) != 0)
-                printk("Early serial init of port 1 failed\n");
-}
-#endif
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-sbc8560_setup_arch(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-	struct gianfar_platform_data *pdata;
-	struct gianfar_mdio_data *mdata;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	if (ppc_md.progress)
-		ppc_md.progress("sbc8560_setup_arch()", 0);
-
-	/* Set loops_per_jiffy to a half-way reasonable value,
-	   for use until calibrate_delay gets called. */
-	loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
-	/* setup PCI host bridges */
-	mpc85xx_setup_hose();
-#endif
-#ifdef CONFIG_SERIAL_8250
-	sbc8560_early_serial_map();
-#endif
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/* Invalidate the entry we stole earlier the serial ports
-	 * should be properly mapped */ 
-	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-
-	/* setup the board related info for the MDIO bus */
-	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
-	mdata->irq[25] = MPC85xx_IRQ_EXT6;
-	mdata->irq[26] = MPC85xx_IRQ_EXT7;
-	mdata->irq[31] = PHY_POLL;
-
-	/* setup the board related information for the enet controllers */
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 25;
-		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 26;
-		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-}
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	/* parse_bootinfo must always be called first */
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3) {
-		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
-		       sizeof (bd_t));
-	}
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
-	settlbcam(num_tlbcam_entries - 1, UARTA_ADDR,
-		  UARTA_ADDR, 0x1000, _PAGE_IO, 0);
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* setup the PowerPC module struct */
-	ppc_md.setup_arch = sbc8560_setup_arch;
-	ppc_md.show_cpuinfo = sbc8560_show_cpuinfo;
-
-	ppc_md.init_IRQ = sbc8560_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = mpc85xx_restart;
-	ppc_md.power_off = mpc85xx_power_off;
-	ppc_md.halt = mpc85xx_halt;
-
-	ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif	/* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
-	ppc_md.early_serial_map = sbc8560_early_serial_map;
-#endif	/* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-
-	if (ppc_md.progress)
-		ppc_md.progress("sbc8560_init(): exit", 0);
-}
diff --git a/arch/ppc/platforms/85xx/sbc8560.h b/arch/ppc/platforms/85xx/sbc8560.h
deleted file mode 100644
index e5e156f60100..000000000000
--- a/arch/ppc/platforms/85xx/sbc8560.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Wind River SBC8560 board definitions
- *
- * Copyright 2003 Motorola Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
- 
-#ifndef __MACH_SBC8560_H__
-#define __MACH_SBC8560_H__
- 
-#include <platforms/85xx/sbc85xx.h>
-#include <asm/irq.h>
-
-#define CPM_MAP_ADDR    (CCSRBAR + MPC85xx_CPM_OFFSET)
- 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  2
-#endif
- 
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD ( 1843200 / 16 )
- 
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, UARTA_ADDR, MPC85xx_IRQ_EXT9, STD_COM_FLAGS, /* ttyS0 */ \
-                iomem_base: (u8 *)UARTA_ADDR,                       \
-                io_type: SERIAL_IO_MEM },                                 \
-        { 0, BASE_BAUD, UARTB_ADDR, MPC85xx_IRQ_EXT10, STD_COM_FLAGS, /* ttyS1 */ \
-                iomem_base: (u8 *)UARTB_ADDR,                       \
-                io_type: SERIAL_IO_MEM },
- 
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
- 
-#endif /* __MACH_SBC8560_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c
deleted file mode 100644
index 2c587ca97bce..000000000000
--- a/arch/ppc/platforms/85xx/sbc85xx.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * WindRiver PowerQUICC III SBC85xx board common routines
- *
- * Copyright 2002, 2003 Motorola Inc.
- * Copyright 2004 Red Hat, Inc.
- * 
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/ppc_sys.h>
-
-#include <mm/mmu_decl.h>
-
-#include <platforms/85xx/sbc85xx.h>
-
-unsigned char __res[sizeof (bd_t)];
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-unsigned long pci_dram_offset = 0;
-#endif
-
-extern unsigned long total_memory;	/* in mm/init */
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char sbc8560_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-	0x0,				/* External  0: */
-	0x0,				/* External  1: */
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 2: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 3: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 4: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PCI slot 3 */
-#else
-	0x0,				/* External  2: */
-	0x0,				/* External  3: */
-	0x0,				/* External  4: */
-	0x0,				/* External  5: */
-#endif
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 6: PHY */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 7: PHY */
-	0x0,				/* External  8: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* External 9: PHY */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* External 10: PHY */
-	0x0,				/* External 11: */
-};
-
-/* ************************************************************************ */
-int
-sbc8560_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	uint memsize = total_memory;
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "Machine\t\t: SBC%s\n", cur_ppc_sys_spec->ppc_sys_name);
-	seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
-	return 0;
-}
-
-void __init
-sbc8560_init_IRQ(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	/* Determine the Physical Address of the OpenPIC regs */
-	phys_addr_t OpenPIC_PAddr =
-	    binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
-	OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
-	OpenPIC_InitSenses = sbc8560_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses);
-
-	/* Skip reserved space and internal sources */
-	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
-	/* we let openpic interrupts starting from an offset, to 
-	 * leave space for cascading interrupts underneath.
-	 */
-	openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-	return;
-}
-
-/*
- * interrupt routing
- */
-
-#ifdef CONFIG_PCI
-int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
-		    unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *        A      B      C      D
-	     */
-	{
-		{PIRQA, PIRQB, PIRQC, PIRQD},
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},
-	};
-
-	const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
diff --git a/arch/ppc/platforms/85xx/sbc85xx.h b/arch/ppc/platforms/85xx/sbc85xx.h
deleted file mode 100644
index 51df4dc04e22..000000000000
--- a/arch/ppc/platforms/85xx/sbc85xx.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * WindRiver PowerQUICC III SBC85xx common board definitions
- *
- * Copyright 2003 Motorola Inc.
- * Copyright 2004 Red Hat, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __PLATFORMS_85XX_SBC85XX_H__
-#define __PLATFORMS_85XX_SBC85XX_H__
-
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR		((uint)0xff700000)
-#define CCSRBAR_SIZE		((uint)1024*1024)
-
-#define BCSR_ADDR		((uint)0xfc000000)
-#define BCSR_SIZE		((uint)(16 * 1024 * 1024))
-
-#define UARTA_ADDR		(BCSR_ADDR + 0x00700000)
-#define UARTB_ADDR		(BCSR_ADDR + 0x00800000)
-#define RTC_DEVICE_ADDR		(BCSR_ADDR + 0x00900000)
-#define EEPROM_ADDR		(BCSR_ADDR + 0x00b00000)
-
-extern int  sbc8560_show_cpuinfo(struct seq_file *m);
-extern void sbc8560_init_IRQ(void) __init; 
-
-/* PCI interrupt controller */
-#define PIRQA		MPC85xx_IRQ_EXT1
-#define PIRQB		MPC85xx_IRQ_EXT2
-#define PIRQC		MPC85xx_IRQ_EXT3
-#define PIRQD		MPC85xx_IRQ_EXT4
-
-#define MPC85XX_PCI1_LOWER_IO	0x00000000
-#define MPC85XX_PCI1_UPPER_IO	0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM	0x80000000
-#define MPC85XX_PCI1_UPPER_MEM	0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE	0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET	0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE	0x01000000
-
-/* FCC1 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK9-12 */
-#define F1_RXCLK       12
-#define F1_TXCLK       11
-
-/* FCC2 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK13-16 */
-#define F2_RXCLK       13
-#define F2_TXCLK       14
-
-/* FCC3 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK13-16 */
-#define F3_RXCLK       15
-#define F3_TXCLK       16
-
-#endif /* __PLATFORMS_85XX_SBC85XX_H__ */
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
deleted file mode 100644
index 8748da3b3e0e..000000000000
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * STx GP3 board specific routines
- *
- * Dan Malek <dan@embeddededge.com>
- * Copyright 2004 Embedded Edge, LLC
- *
- * Copied from mpc8560_ads.c
- * Copyright 2002, 2003 Motorola Inc.
- *
- * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/root_dev.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-#include <linux/interrupt.h>
-#include <linux/rio.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/cpm2.h>
-#include <asm/ppc_sys.h>
-
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-
-
-unsigned char __res[sizeof(bd_t)];
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-unsigned long pci_dram_offset = 0;
-#endif
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u8 gp3_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-	0x0,						/* External  0: */
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 1: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 2: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 3: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 4: PCI slot 3 */
-#else
-	0x0,				/* External  1: */
-	0x0,				/* External  2: */
-	0x0,				/* External  3: */
-	0x0,				/* External  4: */
-#endif
-	0x0,				/* External  5: */
-	0x0,				/* External  6: */
-	0x0,				/* External  7: */
-	0x0,				/* External  8: */
-	0x0,				/* External  9: */
-	0x0,				/* External 10: */
-	0x0,				/* External 11: */
-};
-
-/*
- * Setup the architecture
- */
-static void __init
-gp3_setup_arch(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-	struct gianfar_platform_data *pdata;
-	struct gianfar_mdio_data *mdata;
-
-	cpm2_reset();
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gp3_setup_arch()", 0);
-
-	/* Set loops_per_jiffy to a half-way reasonable value,
-	   for use until calibrate_delay gets called. */
-	loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
-	/* setup PCI host bridges */
-	mpc85xx_setup_hose();
-#endif
-
-	/* setup the board related info for the MDIO bus */
-	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
-	mdata->irq[2] = MPC85xx_IRQ_EXT5;
-	mdata->irq[4] = MPC85xx_IRQ_EXT5;
-	mdata->irq[31] = PHY_POLL;
-
-	/* setup the board related information for the enet controllers */
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-	if (pdata) {
-	/*	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
-		pdata->bus_id = 0;
-		pdata->phy_id = 2;
-		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-	if (pdata) {
-	/*	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
-		pdata->bus_id = 0;
-		pdata->phy_id = 4;
-		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	printk ("bi_immr_base = %8.8lx\n", binfo->bi_immr_base);
-}
-
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
-	while ((irq = cpm2_get_irq()) >= 0)
-		__do_IRQ(irq);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
-	.handler	= cpm2_cascade,
-	.flags		= IRQF_DISABLED,
-	.mask		= CPU_MASK_NONE,
-	.name		= "cpm2_cascade",
-};
-
-static void __init
-gp3_init_IRQ(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-
-	/*
-	 * Setup OpenPIC
-	 */
-
-	/* Determine the Physical Address of the OpenPIC regs */
-	phys_addr_t OpenPIC_PAddr =
-	    binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
-	OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
-	OpenPIC_InitSenses = gp3_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof (gp3_openpic_initsenses);
-
-	/* Skip reserved space and internal sources */
-	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-
-	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
-	/*
-	 * Let openpic interrupts starting from an offset, to
-	 * leave space for cascading interrupts underneath.
-	 */
-	openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-	/* Setup CPM2 PIC */
-        cpm2_init_IRQ();
-
-	setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-
-	return;
-}
-
-static int
-gp3_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	bd_t *binfo = (bd_t *) __res;
-	uint	memsize;
-	unsigned int freq;
-	extern unsigned long total_memory;	/* in mm/init */
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	memsize = total_memory;
-
-	seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
-	seq_printf(m, "Machine\t\t: GP3 - MPC%s\n", cur_ppc_sys_spec->ppc_sys_name);
-	seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000,
-		   freq % 1000000);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
-		    unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *        A      B      C      D
-	     */
-	{
-		{PIRQA, PIRQB, PIRQC, PIRQD},
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},
-	};
-
-	const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_RAPIDIO
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-void
-platform_rio_init(void)
-{
-	/*
-	 * The STx firmware configures the RapidIO Local Access Window
-	 * at 0xc0000000 with a size of 512MB.
-	 */
-	mpc85xx_rio_setup(0xc0000000, 0x20000000);
-}
-#endif /* CONFIG_RAPIDIO */
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	/* parse_bootinfo must always be called first */
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3) {
-		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
-		       sizeof (bd_t));
-
-	}
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* setup the PowerPC module struct */
-	ppc_md.setup_arch = gp3_setup_arch;
-	ppc_md.show_cpuinfo = gp3_show_cpuinfo;
-
-	ppc_md.init_IRQ = gp3_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = mpc85xx_restart;
-	ppc_md.power_off = mpc85xx_power_off;
-	ppc_md.halt = mpc85xx_halt;
-
-	ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
-	ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-	if (ppc_md.progress)
-		ppc_md.progress("platform_init(): exit", 0);
-
-	return;
-}
diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h
deleted file mode 100644
index c6e34c09e979..000000000000
--- a/arch/ppc/platforms/85xx/stx_gp3.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * STx GP3 board definitions
- *
- * Dan Malek (dan@embeddededge.com)
- * Copyright 2004 Embedded Edge, LLC
- *
- * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_STX_GP3_H
-#define __MACH_STX_GP3_H
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR		((uint)0xe0000000)
-#define CCSRBAR_SIZE		((uint)1024*1024)
-
-#define CPM_MAP_ADDR		(CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#define BCSR_ADDR		((uint)0xfc000000)
-#define BCSR_SIZE		((uint)(16 * 1024))
-
-#define BCSR_TSEC1_RESET	0x00000080
-#define BCSR_TSEC2_RESET	0x00000040
-#define BCSR_LED1		0x00000008
-#define BCSR_LED2		0x00000004
-#define BCSR_LED3		0x00000002
-#define BCSR_LED4		0x00000001
-
-extern void mpc85xx_setup_hose(void) __init;
-extern void mpc85xx_restart(char *cmd);
-extern void mpc85xx_power_off(void);
-extern void mpc85xx_halt(void);
-extern void mpc85xx_init_IRQ(void) __init;
-extern unsigned long mpc85xx_find_end_of_memory(void) __init;
-extern void mpc85xx_calibrate_decr(void) __init;
-
-#define PCI_CFG_ADDR_OFFSET	(0x8000)
-#define PCI_CFG_DATA_OFFSET	(0x8004)
-
-/* PCI interrupt controller */
-#define PIRQA		MPC85xx_IRQ_EXT1
-#define PIRQB		MPC85xx_IRQ_EXT2
-#define PIRQC		MPC85xx_IRQ_EXT3
-#define PIRQD		MPC85xx_IRQ_EXT4
-#define PCI_MIN_IDSEL	16
-#define PCI_MAX_IDSEL	19
-#define PCI_IRQ_SLOT	4
-
-#define MPC85XX_PCI1_LOWER_IO	0x00000000
-#define MPC85XX_PCI1_UPPER_IO	0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM	0x80000000
-#define MPC85XX_PCI1_UPPER_MEM	0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE	0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET	0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE	0x01000000
-
-#endif /* __MACH_STX_GP3_H */
diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c
deleted file mode 100644
index 2a863a83d4c8..000000000000
--- a/arch/ppc/platforms/85xx/tqm85xx.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * TQM85xx (40/41/55/60) board specific routines
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * 	Kumar Gala <galak@kernel.crashing.org>
- *      Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <asm/cpm2.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/ppc85xx_setup.h>
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-#endif
-
-
-extern unsigned long total_memory;	/* in mm/init */
-
-unsigned char __res[sizeof (bd_t)];
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char tqm85xx_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-	0x0,						/* External  0: */
-	0x0,						/* External  1: */
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 2: PCI INTA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 3: PCI INTB */
-#else
-	0x0,				/* External  2: */
-	0x0,				/* External  3: */
-#endif
-	0x0,				/* External  4: */
-	0x0,				/* External  5: */
-	0x0,				/* External  6: */
-	0x0,				/* External  7: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 8: PHY */
-	0x0,				/* External  9: */
-	0x0,				/* External 10: */
-	0x0,				/* External 11: */
-};
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-tqm85xx_setup_arch(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-	struct gianfar_platform_data *pdata;
-	struct gianfar_mdio_data *mdata;
-
-#ifdef CONFIG_MPC8560
-	cpm2_reset();
-#endif
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	if (ppc_md.progress)
-		ppc_md.progress("tqm85xx_setup_arch()", 0);
-
-	/* Set loops_per_jiffy to a half-way reasonable value,
-	   for use until calibrate_delay gets called. */
-	loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
-	/* setup PCI host bridges */
-	mpc85xx_setup_hose();
-#endif
-
-#ifndef CONFIG_MPC8560
-#if defined(CONFIG_SERIAL_8250)
-	mpc85xx_early_serial_map();
-#endif
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/* Invalidate the entry we stole earlier the serial ports
-	 * should be properly mapped */
-	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-#endif /* CONFIG_MPC8560 */
-
-	/* setup the board related info for the MDIO bus */
-	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
-	mdata->irq[0] = MPC85xx_IRQ_EXT8;
-	mdata->irq[1] = MPC85xx_IRQ_EXT8;
-	mdata->irq[2] = PHY_POLL;
-	mdata->irq[3] = MPC85xx_IRQ_EXT8;
-	mdata->irq[31] = PHY_POLL;
-
-	/* setup the board related information for the enet controllers */
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 2;
-		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
-	}
-
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-	if (pdata) {
-		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->bus_id = 0;
-		pdata->phy_id = 1;
-		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
-	}
-
-#ifdef CONFIG_MPC8540
-	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
-	if (pdata) {
-		pdata->board_flags = 0;
-		pdata->bus_id = 0;
-		pdata->phy_id = 3;
-		memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
-	}
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
-}
-
-#ifdef CONFIG_MPC8560
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
-	while ((irq = cpm2_get_irq()) >= 0)
-		__do_IRQ(irq);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
-	.handler = cpm2_cascade,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "cpm2_cascade",
-};
-#endif /* CONFIG_MPC8560 */
-
-void __init
-tqm85xx_init_IRQ(void)
-{
-	bd_t *binfo = (bd_t *) __res;
-
-	/* Determine the Physical Address of the OpenPIC regs */
-	phys_addr_t OpenPIC_PAddr =
-		binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
-	OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
-	OpenPIC_InitSenses = tqm85xx_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses);
-
-	/* Skip reserved space and internal sources */
-	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-
-	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
-	/* we let openpic interrupts starting from an offset, to
-	 * leave space for cascading interrupts underneath.
-	 */
-	openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-#ifdef CONFIG_MPC8560
-	/* Setup CPM2 PIC */
-        cpm2_init_IRQ();
-
-	setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-#endif /* CONFIG_MPC8560 */
-
-	return;
-}
-
-int tqm85xx_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	uint memsize = total_memory;
-	bd_t *binfo = (bd_t *) __res;
-	unsigned int freq;
-
-	/* get the core frequency */
-	freq = binfo->bi_intfreq;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: TQ Components\n");
-	seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name);
-	seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
-	return 0;
-}
-
-#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337)
-extern ulong ds1337_get_rtc_time(void);
-extern int ds1337_set_rtc_time(unsigned long nowtime);
-
-static int __init
-tqm85xx_rtc_hookup(void)
-{
-	struct timespec	tv;
-
-        ppc_md.set_rtc_time = ds1337_set_rtc_time;
-        ppc_md.get_rtc_time = ds1337_get_rtc_time;
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = (ppc_md.get_rtc_time)();
-	do_settimeofday(&tv);
-
-	return 0;
-}
-late_initcall(tqm85xx_rtc_hookup);
-#endif
-
-#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-		/*
-		 *      PCI IDSEL/INTPIN->INTLINE
-		 *       A      B      C      D
-		 */
-		{
-			{PIRQA, PIRQB, 0, 0},
-		};
-
-	const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_RAPIDIO
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-void platform_rio_init(void)
-{
-	/* 512MB RIO LAW at 0xc0000000 */
-	mpc85xx_rio_setup(0xc0000000, 0x20000000);
-}
-#endif /* CONFIG_RAPIDIO */
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	/* parse_bootinfo must always be called first */
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3) {
-		memcpy((void *) __res, (void *) (r3 + KERNELBASE),
-		       sizeof (bd_t));
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560)
-	{
-		bd_t *binfo = (bd_t *) __res;
-		struct uart_port p;
-
-		/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
-		settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
-			  binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
-
-		memset(&p, 0, sizeof (p));
-		p.iotype = UPIO_MEM;
-		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
-		p.uartclk = binfo->bi_busfreq;
-
-		gen550_init(0, &p);
-
-		memset(&p, 0, sizeof (p));
-		p.iotype = UPIO_MEM;
-		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
-		p.uartclk = binfo->bi_busfreq;
-
-		gen550_init(1, &p);
-	}
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* setup the PowerPC module struct */
-	ppc_md.setup_arch = tqm85xx_setup_arch;
-	ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo;
-
-	ppc_md.init_IRQ = tqm85xx_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = mpc85xx_restart;
-	ppc_md.power_off = mpc85xx_power_off;
-	ppc_md.halt = mpc85xx_halt;
-
-	ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-#ifndef CONFIG_MPC8560
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif	/* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
-	ppc_md.early_serial_map = mpc85xx_early_serial_map;
-#endif	/* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-#endif /* CONFIG_MPC8560 */
-
-	if (ppc_md.progress)
-		ppc_md.progress("tqm85xx_init(): exit", 0);
-
-	return;
-}
diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h
deleted file mode 100644
index 57284e68f676..000000000000
--- a/arch/ppc/platforms/85xx/tqm85xx.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * TQM85xx (40/41/55/60) board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_TQM85XX_H
-#define __MACH_TQM85XX_H
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR		((uint)0xe0000000)
-#define CCSRBAR_SIZE		((uint)1024*1024)
-
-#define CPM_MAP_ADDR		(CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#define PCI_CFG_ADDR_OFFSET	(0x8000)
-#define PCI_CFG_DATA_OFFSET	(0x8004)
-
-/* PCI interrupt controller */
-#define PIRQA			MPC85xx_IRQ_EXT2
-#define PIRQB			MPC85xx_IRQ_EXT3
-
-#define MPC85XX_PCI1_LOWER_IO	0x00000000
-#define MPC85XX_PCI1_UPPER_IO	0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM	0x80000000
-#define MPC85XX_PCI1_UPPER_MEM	0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE	0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET	0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE	0x01000000
-
-#define BASE_BAUD 115200
-
-extern void mpc85xx_setup_hose(void) __init;
-extern void mpc85xx_restart(char *cmd);
-extern void mpc85xx_power_off(void);
-extern void mpc85xx_halt(void);
-extern void mpc85xx_init_IRQ(void) __init;
-extern unsigned long mpc85xx_find_end_of_memory(void) __init;
-extern void mpc85xx_calibrate_decr(void) __init;
-
-#endif /* __MACH_TQM85XX_H */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 4d158f3bd474..52ddebe6c6d1 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -87,14 +87,6 @@ endif
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_MPC10X_BRIDGE)	+= mpc10x_common.o ppc_sys.o
 obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
-obj-$(CONFIG_85xx)		+= open_pic.o ppc85xx_common.o ppc85xx_setup.o \
-					ppc_sys.o mpc85xx_sys.o \
-					mpc85xx_devices.o
-ifeq ($(CONFIG_85xx),y)
-obj-$(CONFIG_PCI)		+= pci_auto.o
-endif
-obj-$(CONFIG_MPC8548_CDS)	+= todc_time.o
-obj-$(CONFIG_MPC8555_CDS)	+= todc_time.o
 obj-$(CONFIG_PPC_MPC52xx)	+= mpc52xx_setup.o mpc52xx_pic.o \
 					mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
 ifeq ($(CONFIG_PPC_MPC52xx),y)
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
deleted file mode 100644
index 325136e5aee0..000000000000
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
- * MPC85xx Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/fsl_devices.h>
-#include <linux/fs_enet_pd.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-#include <asm/cpm2.h>
-
-/* We use offsets for IORESOURCE_MEM since we do not know at compile time
- * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
- */
-struct gianfar_mdio_data mpc85xx_mdio_pdata = {
-};
-
-static struct gianfar_platform_data mpc85xx_tsec1_pdata = {
-	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
-	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
-	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-};
-
-static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
-	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
-	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
-	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
-	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
-	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
-	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
-	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
-	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
-	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
-	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
-	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
-	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
-	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
-	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
-	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
-	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
-	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
-	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
-	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
-	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
-	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
-	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
-	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_fec_pdata = {
-	.device_flags = 0,
-};
-
-static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {
-	.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
-};
-
-static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = {
-	.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
-};
-
-static struct fs_platform_info mpc85xx_fcc1_pdata = {
-	.fs_no          = fsid_fcc1,
-	.cp_page        = CPM_CR_FCC1_PAGE,
-	.cp_block       = CPM_CR_FCC1_SBLOCK,
-
-	.rx_ring        = 32,
-	.tx_ring        = 32,
-	.rx_copybreak   = 240,
-	.use_napi       = 0,
-	.napi_weight    = 17,
-
-	.clk_mask	= CMX1_CLK_MASK,
-	.clk_route	= CMX1_CLK_ROUTE,
-	.clk_trx	= (PC_F1RXCLK | PC_F1TXCLK),
-
-	.mem_offset     = FCC1_MEM_OFFSET,
-};
-
-static struct fs_platform_info mpc85xx_fcc2_pdata = {
-	.fs_no          = fsid_fcc2,
-	.cp_page        = CPM_CR_FCC2_PAGE,
-	.cp_block       = CPM_CR_FCC2_SBLOCK,
-
-	.rx_ring        = 32,
-	.tx_ring        = 32,
-	.rx_copybreak   = 240,
-	.use_napi       = 0,
-	.napi_weight    = 17,
-
-	.clk_mask	= CMX2_CLK_MASK,
-	.clk_route	= CMX2_CLK_ROUTE,
-	.clk_trx	= (PC_F2RXCLK | PC_F2TXCLK),
-
-	.mem_offset     = FCC2_MEM_OFFSET,
-};
-
-static struct fs_platform_info mpc85xx_fcc3_pdata = {
-	.fs_no          = fsid_fcc3,
-	.cp_page        = CPM_CR_FCC3_PAGE,
-	.cp_block       = CPM_CR_FCC3_SBLOCK,
-
-	.rx_ring        = 32,
-	.tx_ring        = 32,
-	.rx_copybreak   = 240,
-	.use_napi       = 0,
-	.napi_weight    = 17,
-
-	.clk_mask	= CMX3_CLK_MASK,
-	.clk_route	= CMX3_CLK_ROUTE,
-	.clk_trx	= (PC_F3RXCLK | PC_F3TXCLK),
-
-	.mem_offset     = FCC3_MEM_OFFSET,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	[0] = {
-		.mapbase	= 0x4500,
-		.irq		= MPC85xx_IRQ_DUART,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
-	},
-	[1] = {
-		.mapbase	= 0x4600,
-		.irq		= MPC85xx_IRQ_DUART,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
-	},
-	{ },
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC85xx_TSEC1] = {
-		.name = "fsl-gianfar",
-		.id	= 1,
-		.dev.platform_data = &mpc85xx_tsec1_pdata,
-		.num_resources	 = 4,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_ENET1_OFFSET,
-				.end	= MPC85xx_ENET1_OFFSET +
-						MPC85xx_ENET1_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "tx",
-				.start	= MPC85xx_IRQ_TSEC1_TX,
-				.end	= MPC85xx_IRQ_TSEC1_TX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "rx",
-				.start	= MPC85xx_IRQ_TSEC1_RX,
-				.end	= MPC85xx_IRQ_TSEC1_RX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "error",
-				.start	= MPC85xx_IRQ_TSEC1_ERROR,
-				.end	= MPC85xx_IRQ_TSEC1_ERROR,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_TSEC2] = {
-		.name = "fsl-gianfar",
-		.id	= 2,
-		.dev.platform_data = &mpc85xx_tsec2_pdata,
-		.num_resources	 = 4,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_ENET2_OFFSET,
-				.end	= MPC85xx_ENET2_OFFSET +
-						MPC85xx_ENET2_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "tx",
-				.start	= MPC85xx_IRQ_TSEC2_TX,
-				.end	= MPC85xx_IRQ_TSEC2_TX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "rx",
-				.start	= MPC85xx_IRQ_TSEC2_RX,
-				.end	= MPC85xx_IRQ_TSEC2_RX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "error",
-				.start	= MPC85xx_IRQ_TSEC2_ERROR,
-				.end	= MPC85xx_IRQ_TSEC2_ERROR,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_FEC] =	{
-		.name = "fsl-gianfar",
-		.id	= 3,
-		.dev.platform_data = &mpc85xx_fec_pdata,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_ENET3_OFFSET,
-				.end	= MPC85xx_ENET3_OFFSET +
-						MPC85xx_ENET3_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-
-			},
-			{
-				.start	= MPC85xx_IRQ_FEC,
-				.end	= MPC85xx_IRQ_FEC,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_IIC1] = {
-		.name = "fsl-i2c",
-		.id	= 1,
-		.dev.platform_data = &mpc85xx_fsl_i2c_pdata,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_IIC1_OFFSET,
-				.end	= MPC85xx_IIC1_OFFSET +
-						MPC85xx_IIC1_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_IIC1,
-				.end	= MPC85xx_IRQ_IIC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_DMA0] = {
-		.name = "fsl-dma",
-		.id	= 0,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_DMA0_OFFSET,
-				.end	= MPC85xx_DMA0_OFFSET +
-						MPC85xx_DMA0_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_DMA0,
-				.end	= MPC85xx_IRQ_DMA0,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_DMA1] = {
-		.name = "fsl-dma",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_DMA1_OFFSET,
-				.end	= MPC85xx_DMA1_OFFSET +
-						MPC85xx_DMA1_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_DMA1,
-				.end	= MPC85xx_IRQ_DMA1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_DMA2] = {
-		.name = "fsl-dma",
-		.id	= 2,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_DMA2_OFFSET,
-				.end	= MPC85xx_DMA2_OFFSET +
-						MPC85xx_DMA2_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_DMA2,
-				.end	= MPC85xx_IRQ_DMA2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_DMA3] = {
-		.name = "fsl-dma",
-		.id	= 3,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_DMA3_OFFSET,
-				.end	= MPC85xx_DMA3_OFFSET +
-						MPC85xx_DMA3_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_DMA3,
-				.end	= MPC85xx_IRQ_DMA3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_DUART] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev.platform_data = serial_platform_data,
-	},
-	[MPC85xx_PERFMON] = {
-		.name = "fsl-perfmon",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_PERFMON_OFFSET,
-				.end	= MPC85xx_PERFMON_OFFSET +
-						MPC85xx_PERFMON_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_PERFMON,
-				.end	= MPC85xx_IRQ_PERFMON,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_SEC2] = {
-		.name = "fsl-sec2",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_SEC2_OFFSET,
-				.end	= MPC85xx_SEC2_OFFSET +
-						MPC85xx_SEC2_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_SEC2,
-				.end	= MPC85xx_IRQ_SEC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_FCC1] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 1,
-		.num_resources	 = 4,
-		.dev.platform_data = &mpc85xx_fcc1_pdata,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x91300,
-				.end	= 0x9131F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name   = "fcc_regs_c",
-				.start	= 0x91380,
-				.end	= 0x9139F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x88400,
-				.end	= 0x884ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC1,
-				.end	= SIU_INT_FCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_FCC2] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 2,
-		.num_resources	 = 4,
-		.dev.platform_data = &mpc85xx_fcc2_pdata,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x91320,
-				.end	= 0x9133F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name   = "fcc_regs_c",
-				.start	= 0x913A0,
-				.end	= 0x913CF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x88500,
-				.end	= 0x885ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC2,
-				.end	= SIU_INT_FCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_FCC3] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 3,
-		.num_resources	 = 4,
-		.dev.platform_data = &mpc85xx_fcc3_pdata,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x91340,
-				.end	= 0x9135F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name   = "fcc_regs_c",
-				.start	= 0x913D0,
-				.end	= 0x913FF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x88600,
-				.end	= 0x886ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC3,
-				.end	= SIU_INT_FCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_I2C] = {
-		.name = "fsl-cpm-i2c",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91860,
-				.end	= 0x918BF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_I2C,
-				.end	= SIU_INT_I2C,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91A00,
-				.end	= 0x91A1F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC1,
-				.end	= SIU_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91A20,
-				.end	= 0x91A3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC2,
-				.end	= SIU_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91A40,
-				.end	= 0x91A5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC3,
-				.end	= SIU_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91A60,
-				.end	= 0x91A7F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC4,
-				.end	= SIU_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_SPI] = {
-		.name = "fsl-cpm-spi",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91AA0,
-				.end	= 0x91AFF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SPI,
-				.end	= SIU_INT_SPI,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_MCC1] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91B30,
-				.end	= 0x91B3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC1,
-				.end	= SIU_INT_MCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_MCC2] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 2,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91B50,
-				.end	= 0x91B5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC2,
-				.end	= SIU_INT_MCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91A80,
-				.end	= 0x91A8F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC1,
-				.end	= SIU_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91A90,
-				.end	= 0x91A9F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC2,
-				.end	= SIU_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_CPM_USB] = {
-		.name = "fsl-cpm-usb",
-		.id	= 2,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x91B60,
-				.end	= 0x91B7F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_USB,
-				.end	= SIU_INT_USB,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_eTSEC1] = {
-		.name = "fsl-gianfar",
-		.id	= 1,
-		.dev.platform_data = &mpc85xx_etsec1_pdata,
-		.num_resources	 = 4,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_ENET1_OFFSET,
-				.end	= MPC85xx_ENET1_OFFSET +
-						MPC85xx_ENET1_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "tx",
-				.start	= MPC85xx_IRQ_TSEC1_TX,
-				.end	= MPC85xx_IRQ_TSEC1_TX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "rx",
-				.start	= MPC85xx_IRQ_TSEC1_RX,
-				.end	= MPC85xx_IRQ_TSEC1_RX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "error",
-				.start	= MPC85xx_IRQ_TSEC1_ERROR,
-				.end	= MPC85xx_IRQ_TSEC1_ERROR,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_eTSEC2] = {
-		.name = "fsl-gianfar",
-		.id	= 2,
-		.dev.platform_data = &mpc85xx_etsec2_pdata,
-		.num_resources	 = 4,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_ENET2_OFFSET,
-				.end	= MPC85xx_ENET2_OFFSET +
-						MPC85xx_ENET2_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "tx",
-				.start	= MPC85xx_IRQ_TSEC2_TX,
-				.end	= MPC85xx_IRQ_TSEC2_TX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "rx",
-				.start	= MPC85xx_IRQ_TSEC2_RX,
-				.end	= MPC85xx_IRQ_TSEC2_RX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "error",
-				.start	= MPC85xx_IRQ_TSEC2_ERROR,
-				.end	= MPC85xx_IRQ_TSEC2_ERROR,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_eTSEC3] = {
-		.name = "fsl-gianfar",
-		.id	= 3,
-		.dev.platform_data = &mpc85xx_etsec3_pdata,
-		.num_resources	 = 4,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC85xx_ENET3_OFFSET,
-				.end	= MPC85xx_ENET3_OFFSET +
-						MPC85xx_ENET3_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "tx",
-				.start	= MPC85xx_IRQ_TSEC3_TX,
-				.end	= MPC85xx_IRQ_TSEC3_TX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "rx",
-				.start	= MPC85xx_IRQ_TSEC3_RX,
-				.end	= MPC85xx_IRQ_TSEC3_RX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "error",
-				.start	= MPC85xx_IRQ_TSEC3_ERROR,
-				.end	= MPC85xx_IRQ_TSEC3_ERROR,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_eTSEC4] = {
-		.name = "fsl-gianfar",
-		.id	= 4,
-		.dev.platform_data = &mpc85xx_etsec4_pdata,
-		.num_resources	 = 4,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x27000,
-				.end	= 0x27fff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "tx",
-				.start	= MPC85xx_IRQ_TSEC4_TX,
-				.end	= MPC85xx_IRQ_TSEC4_TX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "rx",
-				.start	= MPC85xx_IRQ_TSEC4_RX,
-				.end	= MPC85xx_IRQ_TSEC4_RX,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "error",
-				.start	= MPC85xx_IRQ_TSEC4_ERROR,
-				.end	= MPC85xx_IRQ_TSEC4_ERROR,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_IIC2] = {
-		.name = "fsl-i2c",
-		.id	= 2,
-		.dev.platform_data = &mpc85xx_fsl_i2c2_pdata,
-		.num_resources	 = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x03100,
-				.end	= 0x031ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC85xx_IRQ_IIC1,
-				.end	= MPC85xx_IRQ_IIC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC85xx_MDIO] = {
-		.name = "fsl-gianfar_mdio",
-		.id = 0,
-		.dev.platform_data = &mpc85xx_mdio_pdata,
-		.num_resources = 1,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x24520,
-				.end	= 0x2453f,
-				.flags	= IORESOURCE_MEM,
-			},
-		},
-	},
-};
-
-static int __init mach_mpc85xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, CCSRBAR);
-	return 0;
-}
-
-static int __init mach_mpc85xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc85xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc85xx_init);
diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c
deleted file mode 100644
index d96a93dbcb5a..000000000000
--- a/arch/ppc/syslib/mpc85xx_sys.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * MPC85xx System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "8540",
-		.mask 		= 0xFFFF0000,
-		.value 		= 0x80300000,
-		.num_devices	= 11,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8560",
-		.mask 		= 0xFFFF0000,
-		.value 		= 0x80700000,
-		.num_devices	= 20,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON,
-			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
-			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4,
-			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3,
-			MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8541",
-		.mask 		= 0xFFFF0000,
-		.value 		= 0x80720000,
-		.num_devices	= 14,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
-			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
-			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8541E",
-		.mask 		= 0xFFFF0000,
-		.value 		= 0x807A0000,
-		.num_devices	= 15,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
-			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
-			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8555",
-		.mask 		= 0xFFFF0000,
-		.value 		= 0x80710000,
-		.num_devices	= 20,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
-			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
-			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3,
-			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
-			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
-			MPC85xx_CPM_USB,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8555E",
-		.mask 		= 0xFFFF0000,
-		.value 		= 0x80790000,
-		.num_devices	= 21,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
-			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
-			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3,
-			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
-			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
-			MPC85xx_CPM_USB,
-			MPC85xx_MDIO,
-		},
-	},
-	/* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */
-	{
-		.ppc_sys_name	= "8548E",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x80390010,
-		.num_devices	= 14,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
-			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8548",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x80310010,
-		.num_devices	= 13,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
-			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8547E",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x80390010,
-		.num_devices	= 14,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
-			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8547",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x80310010,
-		.num_devices	= 13,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
-			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8545E",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x80390010,
-		.num_devices	= 12,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
-			MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8545",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x80310010,
-		.num_devices	= 11,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
-			MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8543E",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x803A0010,
-		.num_devices	= 12,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
-			MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
-			MPC85xx_MDIO,
-		},
-	},
-	{
-		.ppc_sys_name	= "8543",
-		.mask 		= 0xFFFF00F0,
-		.value 		= 0x80320010,
-		.num_devices	= 11,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
-			MPC85xx_IIC1, MPC85xx_IIC2,
-			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
-			MPC85xx_MDIO,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
index d42d4085dc81..ac80370ed2f7 100644
--- a/arch/ppc/syslib/ocp.c
+++ b/arch/ppc/syslib/ocp.c
@@ -20,7 +20,7 @@
  *  of peripherals are found on embedded SoC (System On a Chip)
  *  processors or highly integrated system controllers that have
  *  a host bridge and many peripherals.  Common examples where
- *  this is already used include the PPC4xx, PPC85xx, MPC52xx,
+ *  this is already used include the PPC4xx, MPC52xx,
  *  and MV64xxx parts.
  *
  *  This subsystem creates a standard OCP bus type within the
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 18ec94733293..780a3b9b4fe9 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -24,7 +24,7 @@
 
 #include "open_pic_defs.h"
 
-#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx)
+#if defined(CONFIG_PRPMC800)
 #define OPENPIC_BIG_ENDIAN
 #endif
 
diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c
deleted file mode 100644
index e5ac699e7316..000000000000
--- a/arch/ppc/syslib/ppc85xx_common.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * MPC85xx support routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/mpc85xx.h>
-#include <asm/mmu.h>
-
-/* ************************************************************************ */
-/* Return the value of CCSRBAR for the current board */
-
-phys_addr_t
-get_ccsrbar(void)
-{
-        return BOARD_CCSRBAR;
-}
-
-EXPORT_SYMBOL(get_ccsrbar);
-
-/* For now this is a pass through */
-phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
-{
-	return addr;
-};
-EXPORT_SYMBOL(fixup_bigphys_addr);
-
diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h
deleted file mode 100644
index 4fc405425113..000000000000
--- a/arch/ppc/syslib/ppc85xx_common.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * MPC85xx support routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_COMMON_H
-#define __PPC_SYSLIB_PPC85XX_COMMON_H
-
-#include <linux/init.h>
-
-/* Provide access to ccsrbar for any modules, etc */
-phys_addr_t get_ccsrbar(void);
-
-#endif /* __PPC_SYSLIB_PPC85XX_COMMON_H */
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
deleted file mode 100644
index 2475ec6600fe..000000000000
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * MPC85XX common board code
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/time.h>
-#include <asm/mpc85xx.h>
-#include <asm/immap_85xx.h>
-#include <asm/mmu.h>
-#include <asm/ppc_sys.h>
-#include <asm/kgdb.h>
-#include <asm/machdep.h>
-
-#include <syslib/ppc85xx_setup.h>
-
-extern void abort(void);
-
-/* Return the amount of memory */
-unsigned long __init
-mpc85xx_find_end_of_memory(void)
-{
-        bd_t *binfo;
-
-        binfo = (bd_t *) __res;
-
-        return binfo->bi_memsize;
-}
-
-/* The decrementer counts at the system (internal) clock freq divided by 8 */
-void __init
-mpc85xx_calibrate_decr(void)
-{
-        bd_t *binfo = (bd_t *) __res;
-        unsigned int freq, divisor;
-
-        /* get the core frequency */
-        freq = binfo->bi_busfreq;
-
-        /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */
-        divisor = 8;
-        tb_ticks_per_jiffy = freq / divisor / HZ;
-        tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-}
-
-#ifdef CONFIG_SERIAL_8250
-void __init
-mpc85xx_early_serial_map(void)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	struct uart_port serial_req;
-#endif
-	struct plat_serial8250_port *pdata;
-	bd_t *binfo = (bd_t *) __res;
-	pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART);
-
-	/* Setup serial port access */
-	pdata[0].uartclk = binfo->bi_busfreq;
-	pdata[0].mapbase += binfo->bi_immr_base;
-	pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE);
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	memset(&serial_req, 0, sizeof (serial_req));
-	serial_req.iotype = UPIO_MEM;
-	serial_req.mapbase = pdata[0].mapbase;
-	serial_req.membase = pdata[0].membase;
-	serial_req.regshift = 0;
-
-	gen550_init(0, &serial_req);
-#endif
-
-	pdata[1].uartclk = binfo->bi_busfreq;
-	pdata[1].mapbase += binfo->bi_immr_base;
-	pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE);
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Assume gen550_init() doesn't modify serial_req */
-	serial_req.mapbase = pdata[1].mapbase;
-	serial_req.membase = pdata[1].membase;
-
-	gen550_init(1, &serial_req);
-#endif
-}
-#endif
-
-void
-mpc85xx_restart(char *cmd)
-{
-	local_irq_disable();
-	abort();
-}
-
-void
-mpc85xx_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-void
-mpc85xx_halt(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-#ifdef CONFIG_PCI
-
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
-extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
-extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
-#endif
-
-static void __init
-mpc85xx_setup_pci1(struct pci_controller *hose)
-{
-	volatile struct ccsr_pci *pci;
-	volatile struct ccsr_guts *guts;
-	unsigned short temps;
-	bd_t *binfo = (bd_t *) __res;
-
-	pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET,
-		    MPC85xx_PCI1_SIZE);
-
-	guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET,
-		    MPC85xx_GUTS_SIZE);
-
-	early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps);
-	temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	early_write_config_word(hose, 0, 0, PCI_COMMAND, temps);
-
-#define PORDEVSR_PCI	(0x00800000)	/* PCI Mode */
-	if (guts->pordevsr & PORDEVSR_PCI) {
- 		early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
- 	} else {
-		/* PCI-X init */
-		temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
-			| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
-		early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps);
-	}
-
-	/* Disable all windows (except powar0 since its ignored) */
-	pci->powar1 = 0;
-	pci->powar2 = 0;
-	pci->powar3 = 0;
-	pci->powar4 = 0;
-	pci->piwar1 = 0;
-	pci->piwar2 = 0;
-	pci->piwar3 = 0;
-
-	/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */
-	pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
-	pci->potear1 = 0x00000000;
-	pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
-	/* Enable, Mem R/W */
-	pci->powar1 = 0x80044000 |
-	   (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
-
-	/* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
-	pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
-	pci->potear2 = 0x00000000;
-	pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
-	/* Enable, IO R/W */
-	pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
-
-	/* Setup 2G inbound Memory Window @ 0 */
-	pci->pitar1 = 0x00000000;
-	pci->piwbar1 = 0x00000000;
-	pci->piwar1 = 0xa0f5501e;	/* Enable, Prefetch, Local
-					   Mem, Snoop R/W, 2G */
-}
-
-
-extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin);
-extern int mpc85xx_exclude_device(u_char bus, u_char devfn);
-
-#ifdef CONFIG_85xx_PCI2
-static void __init
-mpc85xx_setup_pci2(struct pci_controller *hose)
-{
-	volatile struct ccsr_pci *pci;
-	unsigned short temps;
-	bd_t *binfo = (bd_t *) __res;
-
-	pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET,
-		    MPC85xx_PCI2_SIZE);
-
-	early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps);
-	temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps);
-	early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80);
-
-	/* Disable all windows (except powar0 since its ignored) */
-	pci->powar1 = 0;
-	pci->powar2 = 0;
-	pci->powar3 = 0;
-	pci->powar4 = 0;
-	pci->piwar1 = 0;
-	pci->piwar2 = 0;
-	pci->piwar3 = 0;
-
-	/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */
-	pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
-	pci->potear1 = 0x00000000;
-	pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
-	/* Enable, Mem R/W */
-	pci->powar1 = 0x80044000 |
-	   (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
-
-	/* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
-	pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;
-	pci->potear2 = 0x00000000;
-	pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
-	/* Enable, IO R/W */
-	pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI2_IO_SIZE) - 1);
-
-	/* Setup 2G inbound Memory Window @ 0 */
-	pci->pitar1 = 0x00000000;
-	pci->piwbar1 = 0x00000000;
-	pci->piwar1 = 0xa0f5501e;	/* Enable, Prefetch, Local
-					   Mem, Snoop R/W, 2G */
-}
-#endif /* CONFIG_85xx_PCI2 */
-
-int mpc85xx_pci1_last_busno = 0;
-
-void __init
-mpc85xx_setup_hose(void)
-{
-	struct pci_controller *hose_a;
-#ifdef CONFIG_85xx_PCI2
-	struct pci_controller *hose_b;
-#endif
-	bd_t *binfo = (bd_t *) __res;
-
-	hose_a = pcibios_alloc_controller();
-
-	if (!hose_a)
-		return;
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc85xx_map_irq;
-
-	hose_a->first_busno = 0;
-	hose_a->bus_offset = 0;
-	hose_a->last_busno = 0xff;
-
-	setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
-			   binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
-	hose_a->set_cfg_type = 1;
-
-	mpc85xx_setup_pci1(hose_a);
-
-	hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET;
-	hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM;
-	hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM;
-
-	hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO;
-	hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO;
-	hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE;
-#ifdef CONFIG_85xx_PCI2
-	hose_a->io_base_virt =  ioremap(MPC85XX_PCI1_IO_BASE,
-					MPC85XX_PCI1_IO_SIZE +
-					MPC85XX_PCI2_IO_SIZE);
-#else
-	hose_a->io_base_virt =  ioremap(MPC85XX_PCI1_IO_BASE,
-					MPC85XX_PCI1_IO_SIZE);
-#endif
-	isa_io_base = (unsigned long)hose_a->io_base_virt;
-
-	/* setup resources */
-	pci_init_resource(&hose_a->mem_resources[0],
-			MPC85XX_PCI1_LOWER_MEM,
-			MPC85XX_PCI1_UPPER_MEM,
-			IORESOURCE_MEM, "PCI1 host bridge");
-
-	pci_init_resource(&hose_a->io_resource,
-			MPC85XX_PCI1_LOWER_IO,
-			MPC85XX_PCI1_UPPER_IO,
-			IORESOURCE_IO, "PCI1 host bridge");
-
-	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
-
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
-	/* Pre pciauto_bus_scan VIA init */
-	mpc85xx_cds_enable_via(hose_a);
-#endif
-
-	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
-	/* Post pciauto_bus_scan VIA fixup */
-	mpc85xx_cds_fixup_via(hose_a);
-#endif
-
-#ifdef CONFIG_85xx_PCI2
-	hose_b = pcibios_alloc_controller();
-
-	if (!hose_b)
-		return;
-
-	hose_b->bus_offset = hose_a->last_busno + 1;
-	hose_b->first_busno = hose_a->last_busno + 1;
-	hose_b->last_busno = 0xff;
-
-	setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
-			   binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
-	hose_b->set_cfg_type = 1;
-
-	mpc85xx_setup_pci2(hose_b);
-
-	hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET;
-	hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM;
-	hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM;
-
-	hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO;
-	hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO;
-	hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE;
-	hose_b->io_base_virt = hose_a->io_base_virt + MPC85XX_PCI1_IO_SIZE;
-	
-	/* setup resources */
-	pci_init_resource(&hose_b->mem_resources[0],
-			MPC85XX_PCI2_LOWER_MEM,
-			MPC85XX_PCI2_UPPER_MEM,
-			IORESOURCE_MEM, "PCI2 host bridge");
-
-	pci_init_resource(&hose_b->io_resource,
-			MPC85XX_PCI2_LOWER_IO,
-			MPC85XX_PCI2_UPPER_IO,
-			IORESOURCE_IO, "PCI2 host bridge");
-
-	hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno);
-
-	/* let board code know what the last bus number was on PCI1 */
-	mpc85xx_pci1_last_busno = hose_a->last_busno;
-#endif
-	return;
-}
-#endif /* CONFIG_PCI */
-
-
diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h
deleted file mode 100644
index 6ff79995210b..000000000000
--- a/arch/ppc/syslib/ppc85xx_setup.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * MPC85XX common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_SETUP_H
-#define __PPC_SYSLIB_PPC85XX_SETUP_H
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-extern unsigned long mpc85xx_find_end_of_memory(void) __init;
-extern void mpc85xx_calibrate_decr(void) __init;
-extern void mpc85xx_early_serial_map(void) __init;
-extern void mpc85xx_restart(char *cmd);
-extern void mpc85xx_power_off(void);
-extern void mpc85xx_halt(void);
-extern void mpc85xx_setup_hose(void) __init;
-
-/* PCI config */
-#define PCI1_CFG_ADDR_OFFSET	(0x8000)
-#define PCI1_CFG_DATA_OFFSET	(0x8004)
-
-#define PCI2_CFG_ADDR_OFFSET	(0x9000)
-#define PCI2_CFG_DATA_OFFSET	(0x9004)
-
-/* Additional register for PCI-X configuration */
-#define PCIX_NEXT_CAP	0x60
-#define PCIX_CAP_ID	0x61
-#define PCIX_COMMAND	0x62
-#define PCIX_STATUS	0x64
-
-/* Serial Config */
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  2
-#endif
-
-#ifndef BASE_BAUD
-#define BASE_BAUD 115200
-#endif
-
-/* Offset of CPM register space */
-#define CPM_MAP_ADDR	(CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#endif /* __PPC_SYSLIB_PPC85XX_SETUP_H */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 4a015da9fb1e..0efe7b24b633 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -483,127 +483,6 @@ static __inline__ int irq_canonicalize(int irq)
  */
 #define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
 
-#elif defined(CONFIG_85xx)
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc85xx.h>
-
-/* The MPC8548 openpic has 48 internal interrupts and 12 external
- * interrupts.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * so that we can uniquely identify any interrupt source with a
- * single integer.
- */
-#define NR_CPM_INTS	64
-#define NR_EPIC_INTS	60
-#ifndef NR_8259_INTS
-#define NR_8259_INTS	0
-#endif
-#define NUM_8259_INTERRUPTS NR_8259_INTS
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET	0
-#endif
-
-#define NR_IRQS	(NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* Internal IRQs on MPC85xx OpenPIC */
-
-#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
-#ifdef CONFIG_CPM2
-#define MPC85xx_OPENPIC_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
-#else
-#define MPC85xx_OPENPIC_IRQ_OFFSET	0
-#endif
-#endif
-
-/* Not all of these exist on all MPC85xx implementations */
-#define MPC85xx_IRQ_L2CACHE	( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_ECM		( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DDR		( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_LBIU	( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA0	( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA1	( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA2	( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA3	( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_PCI1	( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_PCI2	( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_ERROR	( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_BELL	(10 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_TX	(11 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_RX	(12 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC1_TX	(13 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC1_RX	(14 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC3_TX	(15 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC3_RX	(16 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC3_ERROR	(17 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC1_ERROR	(18 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC2_TX	(19 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC2_RX	(20 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC4_TX	(21 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC4_RX	(22 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC4_ERROR	(23 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC2_ERROR	(24 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_FEC		(25 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DUART	(26 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_IIC1	(27 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_PERFMON	(28 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_SEC2	(29 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_CPM		(30 + MPC85xx_OPENPIC_IRQ_OFFSET)
-
-/* The 12 external interrupt lines */
-#define MPC85xx_IRQ_EXT0        (48 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT1        (49 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT2        (50 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT3        (51 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT4        (52 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT5        (53 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT6        (54 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT7        (55 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT8        (56 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT9        (57 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT10       (58 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT11       (59 + MPC85xx_OPENPIC_IRQ_OFFSET)
-
-/* CPM related interrupts */
-#define	SIU_INT_ERROR		((uint)0x00+CPM_IRQ_OFFSET)
-#define	SIU_INT_I2C		((uint)0x01+CPM_IRQ_OFFSET)
-#define	SIU_INT_SPI		((uint)0x02+CPM_IRQ_OFFSET)
-#define	SIU_INT_RISC		((uint)0x03+CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
-#define	SIU_INT_USB		((uint)0x0b+CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER1		((uint)0x0c+CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER2		((uint)0x0d+CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER3		((uint)0x0e+CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER4		((uint)0x0f+CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC1		((uint)0x20+CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC2		((uint)0x21+CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC3		((uint)0x22+CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC1		((uint)0x24+CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC2		((uint)0x25+CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC15		((uint)0x30+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC14		((uint)0x31+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC13		((uint)0x32+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC12		((uint)0x33+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC11		((uint)0x34+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC10		((uint)0x35+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC9		((uint)0x36+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC8		((uint)0x37+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC7		((uint)0x38+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC6		((uint)0x39+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC5		((uint)0x3a+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC4		((uint)0x3b+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC3		((uint)0x3c+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC2		((uint)0x3d+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC1		((uint)0x3e+CPM_IRQ_OFFSET)
-#define	SIU_INT_PC0		((uint)0x3f+CPM_IRQ_OFFSET)
-
 #elif defined(CONFIG_PPC_86xx)
 #include <asm/mpc86xx.h>
 
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index 12a2860f9a9c..4c538228e42f 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -90,7 +90,7 @@
  */
 #define CPM_DATAONLY_BASE	((uint)128)
 #define CPM_DP_NOSPACE		((uint)0x7fffffff)
-#if defined(CONFIG_8272) || defined(CONFIG_MPC8555)
+#if defined(CONFIG_8272)
 #define CPM_DATAONLY_SIZE	((uint)(8 * 1024) - CPM_DATAONLY_BASE)
 #define CPM_FCC_SPECIAL_BASE	((uint)0x00009000)
 #else
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
deleted file mode 100644
index 9383d0c13ff8..000000000000
--- a/include/asm-ppc/immap_85xx.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * include/asm-ppc/immap_85xx.h
- *
- * MPC85xx Internal Memory Map
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IMMAP_85XX_H__
-#define __ASM_IMMAP_85XX_H__
-
-/* Eventually this should define all the IO block registers in 85xx */
-
-/* PCI Registers */
-typedef struct ccsr_pci {
-	uint	cfg_addr;	/* 0x.000 - PCI Configuration Address Register */
-	uint	cfg_data;	/* 0x.004 - PCI Configuration Data Register */
-	uint	int_ack;	/* 0x.008 - PCI Interrupt Acknowledge Register */
-	char	res1[3060];
-	uint	potar0;		/* 0x.c00 - PCI Outbound Transaction Address Register 0 */
-	uint	potear0;	/* 0x.c04 - PCI Outbound Translation Extended Address Register 0 */
-	uint	powbar0;	/* 0x.c08 - PCI Outbound Window Base Address Register 0 */
-	char	res2[4];
-	uint	powar0;		/* 0x.c10 - PCI Outbound Window Attributes Register 0 */
-	char	res3[12];
-	uint	potar1;		/* 0x.c20 - PCI Outbound Transaction Address Register 1 */
-	uint	potear1;	/* 0x.c24 - PCI Outbound Translation Extended Address Register 1 */
-	uint	powbar1;	/* 0x.c28 - PCI Outbound Window Base Address Register 1 */
-	char	res4[4];
-	uint	powar1;		/* 0x.c30 - PCI Outbound Window Attributes Register 1 */
-	char	res5[12];
-	uint	potar2;		/* 0x.c40 - PCI Outbound Transaction Address Register 2 */
-	uint	potear2;	/* 0x.c44 - PCI Outbound Translation Extended Address Register 2 */
-	uint	powbar2;	/* 0x.c48 - PCI Outbound Window Base Address Register 2 */
-	char	res6[4];
-	uint	powar2;		/* 0x.c50 - PCI Outbound Window Attributes Register 2 */
-	char	res7[12];
-	uint	potar3;		/* 0x.c60 - PCI Outbound Transaction Address Register 3 */
-	uint	potear3;	/* 0x.c64 - PCI Outbound Translation Extended Address Register 3 */
-	uint	powbar3;	/* 0x.c68 - PCI Outbound Window Base Address Register 3 */
-	char	res8[4];
-	uint	powar3;		/* 0x.c70 - PCI Outbound Window Attributes Register 3 */
-	char	res9[12];
-	uint	potar4;		/* 0x.c80 - PCI Outbound Transaction Address Register 4 */
-	uint	potear4;	/* 0x.c84 - PCI Outbound Translation Extended Address Register 4 */
-	uint	powbar4;	/* 0x.c88 - PCI Outbound Window Base Address Register 4 */
-	char	res10[4];
-	uint	powar4;		/* 0x.c90 - PCI Outbound Window Attributes Register 4 */
-	char	res11[268];
-	uint	pitar3;		/* 0x.da0 - PCI Inbound Translation Address Register 3  */
-	char	res12[4];
-	uint	piwbar3;	/* 0x.da8 - PCI Inbound Window Base Address Register 3 */
-	uint	piwbear3;	/* 0x.dac - PCI Inbound Window Base Extended Address Register 3 */
-	uint	piwar3;		/* 0x.db0 - PCI Inbound Window Attributes Register 3 */
-	char	res13[12];
-	uint	pitar2;		/* 0x.dc0 - PCI Inbound Translation Address Register 2  */
-	char	res14[4];
-	uint	piwbar2;	/* 0x.dc8 - PCI Inbound Window Base Address Register 2 */
-	uint	piwbear2;	/* 0x.dcc - PCI Inbound Window Base Extended Address Register 2 */
-	uint	piwar2;		/* 0x.dd0 - PCI Inbound Window Attributes Register 2 */
-	char	res15[12];
-	uint	pitar1;		/* 0x.de0 - PCI Inbound Translation Address Register 1  */
-	char	res16[4];
-	uint	piwbar1;	/* 0x.de8 - PCI Inbound Window Base Address Register 1 */
-	char	res17[4];
-	uint	piwar1;		/* 0x.df0 - PCI Inbound Window Attributes Register 1 */
-	char	res18[12];
-	uint	err_dr;		/* 0x.e00 - PCI Error Detect Register */
-	uint	err_cap_dr;	/* 0x.e04 - PCI Error Capture Disable Register */
-	uint	err_en;		/* 0x.e08 - PCI Error Enable Register */
-	uint	err_attrib;	/* 0x.e0c - PCI Error Attributes Capture Register */
-	uint	err_addr;	/* 0x.e10 - PCI Error Address Capture Register */
-	uint	err_ext_addr;	/* 0x.e14 - PCI Error Extended Address Capture Register */
-	uint	err_dl;		/* 0x.e18 - PCI Error Data Low Capture Register */
-	uint	err_dh;		/* 0x.e1c - PCI Error Data High Capture Register */
-	uint	gas_timr;	/* 0x.e20 - PCI Gasket Timer Register */
-	uint	pci_timr;	/* 0x.e24 - PCI Timer Register */
-	char	res19[472];
-} ccsr_pci_t;
-
-/* Global Utility Registers */
-typedef struct ccsr_guts {
-	uint	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
-	uint	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
-	uint	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
-	uint	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
-	uint	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
-	char	res1[12];
-	uint	gpporcr;	/* 0x.0020 - General-Purpose POR Configuration Register */
-	char	res2[12];
-	uint	gpiocr;		/* 0x.0030 - GPIO Control Register */
-	char	res3[12];
-	uint	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
-	char	res4[12];
-	uint	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
-	char	res5[12];
-	uint	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
-	char	res6[12];
-	uint	devdisr;	/* 0x.0070 - Device Disable Control */
-	char	res7[12];
-	uint	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
-	char	res8[12];
-	uint	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
-	char	res9[12];
-	uint	pvr;		/* 0x.00a0 - Processor Version Register */
-	uint	svr;		/* 0x.00a4 - System Version Register */
-	char	res10[3416];
-	uint	clkocr;		/* 0x.0e00 - Clock Out Select Register */
-	char	res11[12];
-	uint	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
-	char	res12[12];
-	uint	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
-	char	res13[61916];
-} ccsr_guts_t;
-
-#endif /* __ASM_IMMAP_85XX_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mmu_context.h b/include/asm-ppc/mmu_context.h
index b2e25d8997bf..9f097e25b169 100644
--- a/include/asm-ppc/mmu_context.h
+++ b/include/asm-ppc/mmu_context.h
@@ -64,11 +64,6 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 #define LAST_CONTEXT    	255
 #define FIRST_CONTEXT    	1
 
-#elif defined(CONFIG_E200) || defined(CONFIG_E500)
-#define NO_CONTEXT      	256
-#define LAST_CONTEXT    	255
-#define FIRST_CONTEXT    	1
-
 #else
 
 /* PPC 6xx, 7xx CPUs */
diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
deleted file mode 100644
index d7e4a79d77fb..000000000000
--- a/include/asm-ppc/mpc85xx.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * include/asm-ppc/mpc85xx.h
- *
- * MPC85xx definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MPC85xx_H__
-#define __ASM_MPC85xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_85xx
-
-#ifdef CONFIG_MPC8540_ADS
-#include <platforms/85xx/mpc8540_ads.h>
-#endif
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
-#include <platforms/85xx/mpc8555_cds.h>
-#endif
-#ifdef CONFIG_MPC85xx_CDS
-#include <platforms/85xx/mpc85xx_cds.h>
-#endif
-#ifdef CONFIG_MPC8560_ADS
-#include <platforms/85xx/mpc8560_ads.h>
-#endif
-#ifdef CONFIG_SBC8560
-#include <platforms/85xx/sbc8560.h>
-#endif
-#ifdef CONFIG_STX_GP3
-#include <platforms/85xx/stx_gp3.h>
-#endif
-#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8541) || \
-	defined(CONFIG_TQM8555) || defined(CONFIG_TQM8560)
-#include <platforms/85xx/tqm85xx.h>
-#endif
-
-/*
- * The "residual" board information structure the boot loader passes
- * into the kernel.
- */
-extern unsigned char __res[];
-
-/* Offset from CCSRBAR */
-#define MPC85xx_CPM_OFFSET	(0x80000)
-#define MPC85xx_CPM_SIZE	(0x40000)
-#define MPC85xx_DMA_OFFSET	(0x21000)
-#define MPC85xx_DMA_SIZE	(0x01000)
-#define MPC85xx_DMA0_OFFSET	(0x21100)
-#define MPC85xx_DMA0_SIZE	(0x00080)
-#define MPC85xx_DMA1_OFFSET	(0x21180)
-#define MPC85xx_DMA1_SIZE	(0x00080)
-#define MPC85xx_DMA2_OFFSET	(0x21200)
-#define MPC85xx_DMA2_SIZE	(0x00080)
-#define MPC85xx_DMA3_OFFSET	(0x21280)
-#define MPC85xx_DMA3_SIZE	(0x00080)
-#define MPC85xx_ENET1_OFFSET	(0x24000)
-#define MPC85xx_ENET1_SIZE	(0x01000)
-#define MPC85xx_MIIM_OFFSET	(0x24520)
-#define MPC85xx_MIIM_SIZE	(0x00018)
-#define MPC85xx_ENET2_OFFSET	(0x25000)
-#define MPC85xx_ENET2_SIZE	(0x01000)
-#define MPC85xx_ENET3_OFFSET	(0x26000)
-#define MPC85xx_ENET3_SIZE	(0x01000)
-#define MPC85xx_GUTS_OFFSET	(0xe0000)
-#define MPC85xx_GUTS_SIZE	(0x01000)
-#define MPC85xx_IIC1_OFFSET	(0x03000)
-#define MPC85xx_IIC1_SIZE	(0x00100)
-#define MPC85xx_OPENPIC_OFFSET	(0x40000)
-#define MPC85xx_OPENPIC_SIZE	(0x40000)
-#define MPC85xx_PCI1_OFFSET	(0x08000)
-#define MPC85xx_PCI1_SIZE	(0x01000)
-#define MPC85xx_PCI2_OFFSET	(0x09000)
-#define MPC85xx_PCI2_SIZE	(0x01000)
-#define MPC85xx_PERFMON_OFFSET	(0xe1000)
-#define MPC85xx_PERFMON_SIZE	(0x01000)
-#define MPC85xx_SEC2_OFFSET	(0x30000)
-#define MPC85xx_SEC2_SIZE	(0x10000)
-#define MPC85xx_UART0_OFFSET	(0x04500)
-#define MPC85xx_UART0_SIZE	(0x00100)
-#define MPC85xx_UART1_OFFSET	(0x04600)
-#define MPC85xx_UART1_SIZE	(0x00100)
-
-#define MPC85xx_CCSRBAR_SIZE	(1024*1024)
-
-/* Let modules/drivers get at CCSRBAR */
-extern phys_addr_t get_ccsrbar(void);
-
-#ifdef MODULE
-#define CCSRBAR get_ccsrbar()
-#else
-#define CCSRBAR BOARD_CCSRBAR
-#endif
-
-enum ppc_sys_devices {
-	MPC85xx_TSEC1,
-	MPC85xx_TSEC2,
-	MPC85xx_FEC,
-	MPC85xx_IIC1,
-	MPC85xx_DMA0,
-	MPC85xx_DMA1,
-	MPC85xx_DMA2,
-	MPC85xx_DMA3,
-	MPC85xx_DUART,
-	MPC85xx_PERFMON,
-	MPC85xx_SEC2,
-	MPC85xx_CPM_SPI,
-	MPC85xx_CPM_I2C,
-	MPC85xx_CPM_USB,
-	MPC85xx_CPM_SCC1,
-	MPC85xx_CPM_SCC2,
-	MPC85xx_CPM_SCC3,
-	MPC85xx_CPM_SCC4,
-	MPC85xx_CPM_FCC1,
-	MPC85xx_CPM_FCC2,
-	MPC85xx_CPM_FCC3,
-	MPC85xx_CPM_MCC1,
-	MPC85xx_CPM_MCC2,
-	MPC85xx_CPM_SMC1,
-	MPC85xx_CPM_SMC2,
-	MPC85xx_eTSEC1,
-	MPC85xx_eTSEC2,
-	MPC85xx_eTSEC3,
-	MPC85xx_eTSEC4,
-	MPC85xx_IIC2,
-	MPC85xx_MDIO,
-	NUM_PPC_SYS_DEVS,
-};
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-#define MPC85XX_INTERNAL_IRQ_SENSES \
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  0 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  1 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  2 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  3 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  4 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  5 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  6 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  7 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  8 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  9 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 10 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 11 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 12 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 13 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 14 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 15 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 16 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 17 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 18 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 19 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 20 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 21 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 22 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 23 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 24 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 25 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 26 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 27 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 28 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 29 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 30 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 31 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 32 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 33 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 34 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 35 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 36 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 37 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 38 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 39 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 40 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 41 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 42 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 43 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 44 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 45 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 46 */	\
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE)	/* Internal 47 */
-
-#endif /* CONFIG_85xx */
-#endif /* __ASM_MPC85xx_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
index 063ad91cbbcc..69347bdbb401 100644
--- a/include/asm-ppc/pgtable.h
+++ b/include/asm-ppc/pgtable.h
@@ -271,48 +271,6 @@ extern unsigned long ioremap_bot, ioremap_base;
 /* ERPN in a PTE never gets cleared, ignore it */
 #define _PTE_NONE_MASK	0xffffffff00000000ULL
 
-#elif defined(CONFIG_FSL_BOOKE)
-/*
-   MMU Assist Register 3:
-
-   32 33 34 35 36  ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
-   RPN......................  0  0 U0 U1 U2 U3 UX SX UW SW UR SR
-
-   - PRESENT *must* be in the bottom three bits because swap cache
-     entries use the top 29 bits.
-
-   - FILE *must* be in the bottom three bits because swap cache
-     entries use the top 29 bits.
-*/
-
-/* Definitions for FSL Book-E Cores */
-#define _PAGE_PRESENT	0x00001	/* S: PTE contains a translation */
-#define _PAGE_USER	0x00002	/* S: User page (maps to UR) */
-#define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
-#define _PAGE_ACCESSED	0x00004	/* S: Page referenced */
-#define _PAGE_HWWRITE	0x00008	/* H: Dirty & RW, set in exception */
-#define _PAGE_RW	0x00010	/* S: Write permission */
-#define _PAGE_HWEXEC	0x00020	/* H: UX permission */
-
-#define _PAGE_ENDIAN	0x00040	/* H: E bit */
-#define _PAGE_GUARDED	0x00080	/* H: G bit */
-#define _PAGE_COHERENT	0x00100	/* H: M bit */
-#define _PAGE_NO_CACHE	0x00200	/* H: I bit */
-#define _PAGE_WRITETHRU	0x00400	/* H: W bit */
-
-#ifdef CONFIG_PTE_64BIT
-#define _PAGE_DIRTY	0x08000	/* S: Page dirty */
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK	0xffffffffffff0000ULL
-#else
-#define _PAGE_DIRTY	0x00800	/* S: Page dirty */
-#endif
-
-#define _PMD_PRESENT	0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD	(~PAGE_MASK)
-
 #elif defined(CONFIG_8xx)
 /* Definitions for 8xx embedded chips. */
 #define _PAGE_PRESENT	0x0001	/* Page is valid */
@@ -484,11 +442,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 
 /* in some case we want to additionaly adjust where the pfn is in the pte to
  * allow room for more flags */
-#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#define PFN_SHIFT_OFFSET	(PAGE_SHIFT + 8)
-#else
 #define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
-#endif
 
 #define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
index 80c5851972f5..d2fee41d600b 100644
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h
@@ -23,8 +23,6 @@
 
 #if defined(CONFIG_8260)
 #include <asm/mpc8260.h>
-#elif defined(CONFIG_85xx)
-#include <asm/mpc85xx.h>
 #elif defined(CONFIG_8xx)
 #include <asm/mpc8xx.h>
 #elif defined(CONFIG_PPC_MPC52xx)
diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h
index 18d04e8164ca..3819e17cd7b0 100644
--- a/include/asm-ppc/ppcboot.h
+++ b/include/asm-ppc/ppcboot.h
@@ -38,7 +38,7 @@ typedef struct bd_info {
 	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-#if defined(CONFIG_8xx) || defined(CONFIG_CPM2) || defined(CONFIG_85xx)
+#if defined(CONFIG_8xx) || defined(CONFIG_CPM2)
 	unsigned long	bi_immr_base;	/* base of IMMR register */
 #endif
 #if defined(CONFIG_PPC_MPC52xx)
@@ -72,12 +72,11 @@ typedef struct bd_info {
 #if defined(CONFIG_HYMOD)
 	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
 #endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \
-	defined(CONFIG_85xx)
+#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x)
 	/* second onboard ethernet port */
 	unsigned char	bi_enet1addr[6];
 #endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX) || defined(CONFIG_85xx)
+#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX)
 	/* third onboard ethernet ports */
 	unsigned char	bi_enet2addr[6];
 #endif
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
index 2f1a2afcfc28..91e96af88bd8 100644
--- a/include/asm-ppc/reg_booke.h
+++ b/include/asm-ppc/reg_booke.h
@@ -218,32 +218,6 @@
 #define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
 #define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
 #endif
-#ifdef CONFIG_E500
-#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
-#define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
-#define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
-#define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
-#define MCSR_GL_CI 	0x00010000UL /* Guarded Load or Cache-Inhibited stwcx. */
-#define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
-#define MCSR_BUS_RAERR 	0x00000040UL /* Read Address Error */
-#define MCSR_BUS_WAERR 	0x00000020UL /* Write Address Error */
-#define MCSR_BUS_IBERR 	0x00000010UL /* Instruction Data Error */
-#define MCSR_BUS_RBERR 	0x00000008UL /* Read Data Bus Error */
-#define MCSR_BUS_WBERR 	0x00000004UL /* Write Data Bus Error */
-#define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
-#define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
-#endif
-#ifdef CONFIG_E200
-#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
-#define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
-#define MCSR_CPERR 	0x10000000UL /* Cache Parity Error */
-#define MCSR_EXCP_ERR 	0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
-					fetch for an exception handler */
-#define MCSR_BUS_IRERR 	0x00000010UL /* Read Bus Error on instruction fetch*/
-#define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
-#define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
-					store or cache line push */
-#endif
 
 /* Bit definitions for the DBSR. */
 /*
diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
index 6220ef9ab8bc..d35ed10315b1 100644
--- a/include/asm-ppc/serial.h
+++ b/include/asm-ppc/serial.h
@@ -29,8 +29,6 @@
 #include <platforms/spruce.h>
 #elif defined(CONFIG_4xx)
 #include <asm/ibm4xx.h>
-#elif defined(CONFIG_85xx)
-#include <asm/mpc85xx.h>
 #elif defined(CONFIG_RADSTONE_PPC7D)
 #include <platforms/radstone_ppc7d.h>
 #else