diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-24 01:39:09 +0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-24 01:39:09 +0400 |
| commit | e317234975cb7463b8ca21a93bb6862d9dcf113f (patch) | |
| tree | 4446fa3a21364f3cba23a22aa2a94027f169d8df | |
| parent | f37ab0fba271e43edab0e3ae9fe644fcda455402 (diff) | |
| parent | 7483d45f0aee3afc0646d185cabd4af9f6cab58c (diff) | |
| download | linux-e317234975cb7463b8ca21a93bb6862d9dcf113f.tar.xz | |
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- V4L2 API additions to better support JPEG compression control
- media API additions to properly support MPEG decoders
- V4L2 API additions for image crop/scaling
- a few other V4L2 API DocBook fixes/improvements
- two new DVB frontend drivers: m88rs2000 and rtl2830
- two new DVB drivers: az6007 and rtl28xxu
- a framework for ISA drivers, that removed lots of common code found
at the ISA radio drivers
- a new FM transmitter driver (radio-keene)
- a GPIO-based IR receiver driver
- a new sensor driver: mt9m032
- some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
vs6624
- several new board additions, driver fixes, improvements and cleanups.
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
[media] update CARDLIST.em28xx
[media] partially reverts changeset fa5527c
[media] stb0899: fix the limits for signal strength values
[media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
[media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
[media] -EINVAL -> -ENOTTY
[media] gspca - sn9c20x: Cleanup source
[media] gspca - sn9c20x: Simplify register write for capture start/stop
[media] gspca - sn9c20x: Add automatic JPEG compression mechanism
[media] gspca - sn9c20x: Greater delay in case of sensor no response
[media] gspca - sn9c20x: Optimize the code of write sequences
[media] gspca - sn9c20x: Add the JPEG compression quality control
[media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
[media] gspca - sn9c20x: Propagate USB errors to higher level
[media] gspca - sn9c20x: Use the new video control mechanism
[media] gspca - sn9c20x: Fix loss of frame start
[media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
[media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
[media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
[media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
...
310 files changed, 18521 insertions, 7049 deletions
diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index cea6fd3ed428..7dc65c592a87 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -128,6 +128,26 @@ url="http://www.ijg.org">http://www.ijg.org</ulink>)</corpauthor> <subtitle>Version 1.02</subtitle> </biblioentry> + <biblioentry id="itu-t81"> + <abbrev>ITU-T.81</abbrev> + <authorgroup> + <corpauthor>International Telecommunication Union +(<ulink url="http://www.itu.int">http://www.itu.int</ulink>)</corpauthor> + </authorgroup> + <title>ITU-T Recommendation T.81 +"Information Technology — Digital Compression and Coding of Continous-Tone +Still Images — Requirements and Guidelines"</title> + </biblioentry> + + <biblioentry id="w3c-jpeg-jfif"> + <abbrev>W3C JPEG JFIF</abbrev> + <authorgroup> + <corpauthor>The World Wide Web Consortium (<ulink +url="http://www.w3.org/Graphics/JPEG">http://www.w3.org</ulink>)</corpauthor> + </authorgroup> + <title>JPEG JFIF</title> + </biblioentry> + <biblioentry id="smpte12m"> <abbrev>SMPTE 12M</abbrev> <authorgroup> diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index a2485b3ff3d2..bce97c50391b 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2393,6 +2393,20 @@ details.</para> to the <link linkend="control">User controls class</link>. </para> </listitem> + <listitem> + <para>Added the device_caps field to struct v4l2_capabilities and added the new + V4L2_CAP_DEVICE_CAPS capability.</para> + </listitem> + </orderedlist> + </section> + + <section> + <title>V4L2 in Linux 3.4</title> + <orderedlist> + <listitem> + <para>Added <link linkend="jpeg-controls">JPEG compression control + class</link>.</para> + </listitem> </orderedlist> </section> diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index a1be37897ad7..b84f25e9cc87 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -1286,6 +1286,49 @@ produce a slight hiss, but in the encoder itself, guaranteeing a fixed and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry> </row> <row><entry></entry></row> + <row id="v4l2-mpeg-audio-dec-playback"> + <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant> </entry> + <entry>enum v4l2_mpeg_audio_dec_playback</entry> + </row><row><entry spanname="descr">Determines how monolingual audio should be played back. +Possible values are:</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO</constant> </entry> + <entry>Automatically determines the best playback mode.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO</constant> </entry> + <entry>Stereo playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT</constant> </entry> + <entry>Left channel playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT</constant> </entry> + <entry>Right channel playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO</constant> </entry> + <entry>Mono playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO</constant> </entry> + <entry>Stereo playback with swapped left and right channels.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + <row id="v4l2-mpeg-audio-dec-multilingual-playback"> + <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant> </entry> + <entry>enum v4l2_mpeg_audio_dec_playback</entry> + </row><row><entry spanname="descr">Determines how multilingual audio should be played back.</entry> + </row> + <row><entry></entry></row> <row id="v4l2-mpeg-video-encoding"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ENCODING</constant> </entry> <entry>enum v4l2_mpeg_video_encoding</entry> @@ -1447,6 +1490,22 @@ of the video. The supplied 32-bit integer is interpreted as follows (bit </tbody> </entrytbl> </row> + <row><entry></entry></row> + <row id="v4l2-mpeg-video-dec-pts"> + <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_PTS</constant> </entry> + <entry>integer64</entry> + </row><row><entry spanname="descr">This read-only control returns the +33-bit video Presentation Time Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of +the currently displayed frame. This is the same PTS as is used in &VIDIOC-DECODER-CMD;.</entry> + </row> + <row><entry></entry></row> + <row id="v4l2-mpeg-video-dec-frame"> + <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_FRAME</constant> </entry> + <entry>integer64</entry> + </row><row><entry spanname="descr">This read-only control returns the +frame counter of the frame that is currently displayed (decoded). This value is reset to 0 whenever +the decoder is started.</entry> + </row> <row><entry></entry></row> @@ -3377,6 +3436,167 @@ interface and may change in the future.</para> </tbody> </tgroup> </table> + </section> + + <section id="jpeg-controls"> + <title>JPEG Control Reference</title> + <para>The JPEG class includes controls for common features of JPEG + encoders and decoders. Currently it includes features for codecs + implementing progressive baseline DCT compression process with + Huffman entrophy coding.</para> + <table pgwide="1" frame="none" id="jpeg-control-id"> + <title>JPEG Control IDs</title> + <tgroup cols="4"> + <colspec colname="c1" colwidth="1*" /> + <colspec colname="c2" colwidth="6*" /> + <colspec colname="c3" colwidth="2*" /> + <colspec colname="c4" colwidth="6*" /> + <spanspec namest="c1" nameend="c2" spanname="id" /> + <spanspec namest="c2" nameend="c4" spanname="descr" /> + <thead> + <row> + <entry spanname="id" align="left">ID</entry> + <entry align="left">Type</entry> + </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> + </row> + </thead> + <tbody valign="top"> + <row><entry></entry></row> + <row> + <entry spanname="id"><constant>V4L2_CID_JPEG_CLASS</constant> </entry> + <entry>class</entry> + </row><row><entry spanname="descr">The JPEG class descriptor. Calling + &VIDIOC-QUERYCTRL; for this control will return a description of this + control class. + + </entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant></entry> + <entry>menu</entry> + </row> + <row id="jpeg-chroma-subsampling-control"> + <entry spanname="descr">The chroma subsampling factors describe how + each component of an input image is sampled, in respect to maximum + sample rate in each spatial dimension. See <xref linkend="itu-t81"/>, + clause A.1.1. for more details. The <constant> + V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant> control determines how + Cb and Cr components are downsampled after coverting an input image + from RGB to Y'CbCr color space. + </entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_444</constant> + </entry><entry>No chroma subsampling, each pixel has + Y, Cr and Cb values.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_422</constant> + </entry><entry>Horizontally subsample Cr, Cb components + by a factor of 2.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_420</constant> + </entry><entry>Subsample Cr, Cb components horizontally + and vertically by 2.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_411</constant> + </entry><entry>Horizontally subsample Cr, Cb components + by a factor of 4.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_410</constant> + </entry><entry>Subsample Cr, Cb components horizontally + by 4 and vertically by 2.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY</constant> + </entry><entry>Use only luminance component.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_JPEG_RESTART_INTERVAL</constant> + </entry><entry>integer</entry> + </row> + <row><entry spanname="descr"> + The restart interval determines an interval of inserting RSTm + markers (m = 0..7). The purpose of these markers is to additionally + reinitialize the encoder process, in order to process blocks of + an image independently. + For the lossy compression processes the restart interval unit is + MCU (Minimum Coded Unit) and its value is contained in DRI + (Define Restart Interval) marker. If <constant> + V4L2_CID_JPEG_RESTART_INTERVAL</constant> control is set to 0, + DRI and RSTm markers will not be inserted. + </entry> + </row> + <row id="jpeg-quality-control"> + <entry spanname="id"><constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr"> + <constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control + determines trade-off between image quality and size. + It provides simpler method for applications to control image quality, + without a need for direct reconfiguration of luminance and chrominance + quantization tables. + + In cases where a driver uses quantization tables configured directly + by an application, using interfaces defined elsewhere, <constant> + V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control should be set + by driver to 0. + + <para>The value range of this control is driver-specific. Only + positive, non-zero values are meaningful. The recommended range + is 1 - 100, where larger values correspond to better image quality. + </para> + </entry> + </row> + <row id="jpeg-active-marker-control"> + <entry spanname="id"><constant>V4L2_CID_JPEG_ACTIVE_MARKER</constant></entry> + <entry>bitmask</entry> + </row> + <row> + <entry spanname="descr">Specify which JPEG markers are included + in compressed stream. This control is valid only for encoders. + </entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP0</constant></entry> + <entry>Application data segment APP<subscript>0</subscript>.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP1</constant></entry> + <entry>Application data segment APP<subscript>1</subscript>.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_COM</constant></entry> + <entry>Comment segment.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DQT</constant></entry> + <entry>Quantization tables segment.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DHT</constant></entry> + <entry>Huffman tables segment.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + </tbody> + </tgroup> + </table> + <para>For more details about JPEG specification, refer + to <xref linkend="itu-t81"/>, <xref linkend="jfif"/>, + <xref linkend="w3c-jpeg-jfif"/>.</para> </section> </section> diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index 2f0bdb4d5551..b299e4779354 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -52,6 +52,10 @@ cropping and composing rectangles have the same size.</para> </textobject> </mediaobject> </figure> + +For complete list of the available selection targets see table <xref +linkend="v4l2-sel-target"/> + </section> <section> @@ -186,7 +190,7 @@ V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para> <section> - <title>Scaling control.</title> + <title>Scaling control</title> <para>An application can detect if scaling is performed by comparing the width and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE @@ -200,7 +204,7 @@ the scaling ratios using these values.</para> <section> - <title>Comparison with old cropping API.</title> + <title>Comparison with old cropping API</title> <para>The selection API was introduced to cope with deficiencies of previous <link linkend="crop"> API </link>, that was designed to control simple capture diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index e97c512861bb..8ae38876172e 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -128,6 +128,22 @@ structs, ioctls) must be noted in more detail in the history chapter applications. --> <revision> + <revnumber>3.4</revnumber> + <date>2012-01-25</date> + <authorinitials>sn</authorinitials> + <revremark>Added <link linkend="jpeg-controls">JPEG compression + control class.</link> + </revremark> + </revision> + + <revision> + <revnumber>3.3</revnumber> + <date>2012-01-11</date> + <authorinitials>hv</authorinitials> + <revremark>Added device_caps field to struct v4l2_capabilities.</revremark> + </revision> + + <revision> <revnumber>3.2</revnumber> <date>2011-08-26</date> <authorinitials>hv</authorinitials> @@ -417,7 +433,7 @@ and discussions on the V4L mailing list.</revremark> </partinfo> <title>Video for Linux Two API Specification</title> - <subtitle>Revision 3.2</subtitle> + <subtitle>Revision 3.3</subtitle> <chapter id="common"> &sub-common; @@ -473,6 +489,7 @@ and discussions on the V4L mailing list.</revremark> &sub-cropcap; &sub-dbg-g-chip-ident; &sub-dbg-g-register; + &sub-decoder-cmd; &sub-dqevent; &sub-encoder-cmd; &sub-enumaudio; diff --git a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml new file mode 100644 index 000000000000..74b87f6e480a --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml @@ -0,0 +1,256 @@ +<refentry id="vidioc-decoder-cmd"> + <refmeta> + <refentrytitle>ioctl VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_DECODER_CMD</refname> + <refname>VIDIOC_TRY_DECODER_CMD</refname> + <refpurpose>Execute an decoder command</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_decoder_cmd *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + + <para>This is an <link linkend="experimental">experimental</link> +interface and may change in the future.</para> + </note> + + <para>These ioctls control an audio/video (usually MPEG-) decoder. +<constant>VIDIOC_DECODER_CMD</constant> sends a command to the +decoder, <constant>VIDIOC_TRY_DECODER_CMD</constant> can be used to +try a command without actually executing it. To send a command applications +must initialize all fields of a &v4l2-decoder-cmd; and call +<constant>VIDIOC_DECODER_CMD</constant> or <constant>VIDIOC_TRY_DECODER_CMD</constant> +with a pointer to this structure.</para> + + <para>The <structfield>cmd</structfield> field must contain the +command code. Some commands use the <structfield>flags</structfield> field for +additional information. +</para> + + <para>A <function>write</function>() or &VIDIOC-STREAMON; call sends an implicit +START command to the decoder if it has not been started yet. +</para> + + <para>A <function>close</function>() or &VIDIOC-STREAMOFF; call of a streaming +file descriptor sends an implicit immediate STOP command to the decoder, and all +buffered data is discarded.</para> + + <para>These ioctls are optional, not all drivers may support +them. They were introduced in Linux 3.3.</para> + + <table pgwide="1" frame="none" id="v4l2-decoder-cmd"> + <title>struct <structname>v4l2_decoder_cmd</structname></title> + <tgroup cols="5"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>cmd</structfield></entry> + <entry></entry> + <entry></entry> + <entry>The decoder command, see <xref linkend="decoder-cmds" />.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Flags to go with the command. If no flags are defined for +this command, drivers and applications must set this field to zero.</entry> + </row> + <row> + <entry>union</entry> + <entry>(anonymous)</entry> + <entry></entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>start</structfield></entry> + <entry></entry> + <entry>Structure containing additional data for the +<constant>V4L2_DEC_CMD_START</constant> command.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__s32</entry> + <entry><structfield>speed</structfield></entry> + <entry>Playback speed and direction. The playback speed is defined as +<structfield>speed</structfield>/1000 of the normal speed. So 1000 is normal playback. +Negative numbers denote reverse playback, so -1000 does reverse playback at normal +speed. Speeds -1, 0 and 1 have special meanings: speed 0 is shorthand for 1000 +(normal playback). A speed of 1 steps just one frame forward, a speed of -1 steps +just one frame back. + </entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>format</structfield></entry> + <entry>Format restrictions. This field is set by the driver, not the +application. Possible values are <constant>V4L2_DEC_START_FMT_NONE</constant> if +there are no format restrictions or <constant>V4L2_DEC_START_FMT_GOP</constant> +if the decoder operates on full GOPs (<wordasword>Group Of Pictures</wordasword>). +This is usually the case for reverse playback: the decoder needs full GOPs, which +it can then play in reverse order. So to implement reverse playback the application +must feed the decoder the last GOP in the video file, then the GOP before that, etc. etc. + </entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>stop</structfield></entry> + <entry></entry> + <entry>Structure containing additional data for the +<constant>V4L2_DEC_CMD_STOP</constant> command.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u64</entry> + <entry><structfield>pts</structfield></entry> + <entry>Stop playback at this <structfield>pts</structfield> or immediately +if the playback is already past that timestamp. Leave to 0 if you want to stop after the +last frame was decoded. + </entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>raw</structfield></entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>data</structfield>[16]</entry> + <entry>Reserved for future extensions. Drivers and +applications must set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="decoder-cmds"> + <title>Decoder Commands</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>V4L2_DEC_CMD_START</constant></entry> + <entry>0</entry> + <entry>Start the decoder. When the decoder is already +running or paused, this command will just change the playback speed. +That means that calling <constant>V4L2_DEC_CMD_START</constant> when +the decoder was paused will <emphasis>not</emphasis> resume the decoder. +You have to explicitly call <constant>V4L2_DEC_CMD_RESUME</constant> for that. +This command has one flag: +<constant>V4L2_DEC_CMD_START_MUTE_AUDIO</constant>. If set, then audio will +be muted when playing back at a non-standard speed. + </entry> + </row> + <row> + <entry><constant>V4L2_DEC_CMD_STOP</constant></entry> + <entry>1</entry> + <entry>Stop the decoder. When the decoder is already stopped, +this command does nothing. This command has two flags: +if <constant>V4L2_DEC_CMD_STOP_TO_BLACK</constant> is set, then the decoder will +set the picture to black after it stopped decoding. Otherwise the last image will +repeat. If <constant>V4L2_DEC_CMD_STOP_IMMEDIATELY</constant> is set, then the decoder +stops immediately (ignoring the <structfield>pts</structfield> value), otherwise it +will keep decoding until timestamp >= pts or until the last of the pending data from +its internal buffers was decoded. +</entry> + </row> + <row> + <entry><constant>V4L2_DEC_CMD_PAUSE</constant></entry> + <entry>2</entry> + <entry>Pause the decoder. When the decoder has not been +started yet, the driver will return an &EPERM;. When the decoder is +already paused, this command does nothing. This command has one flag: +if <constant>V4L2_DEC_CMD_PAUSE_TO_BLACK</constant> is set, then set the +decoder output to black when paused. +</entry> + </row> + <row> + <entry><constant>V4L2_DEC_CMD_RESUME</constant></entry> + <entry>3</entry> + <entry>Resume decoding after a PAUSE command. When the +decoder has not been started yet, the driver will return an &EPERM;. +When the decoder is already running, this command does nothing. No +flags are defined for this command.</entry> + </row> + </tbody> + </tgroup> + </table> + + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The <structfield>cmd</structfield> field is invalid.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EPERM</errorcode></term> + <listitem> + <para>The application sent a PAUSE or RESUME command when +the decoder was not running.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml index af7f3f2a36dd..f431b3ba79bd 100644 --- a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml @@ -74,15 +74,16 @@ only used by the STOP command and contains one bit: If the encoding will continue until the end of the current <wordasword>Group Of Pictures</wordasword>, otherwise it will stop immediately.</para> - <para>A <function>read</function>() call sends a START command to -the encoder if it has not been started yet. After a STOP command, + <para>A <function>read</function>() or &VIDIOC-STREAMON; call sends an implicit +START command to the encoder if it has not been started yet. After a STOP command, <function>read</function>() calls will read the remaining data buffered by the driver. When the buffer is empty, <function>read</function>() will return zero and the next <function>read</function>() call will restart the encoder.</para> - <para>A <function>close</function>() call sends an immediate STOP -to the encoder, and all buffered data is discarded.</para> + <para>A <function>close</function>() or &VIDIOC-STREAMOFF; call of a streaming +file descriptor sends an implicit immediate STOP to the encoder, and all buffered +data is discarded.</para> <para>These ioctls are optional, not all drivers may support them. They were introduced in Linux 2.6.21.</para> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml index 01ea24b84385..48748499c097 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml @@ -57,6 +57,11 @@ <refsect1> <title>Description</title> + <para>These ioctls are <emphasis role="bold">deprecated</emphasis>. + New drivers and applications should use <link linkend="jpeg-controls"> + JPEG class controls</link> for image quality and JPEG markers control. + </para> + <para>[to do]</para> <para>Ronald Bultje elaborates:</para> @@ -86,7 +91,10 @@ to add them.</para> <row> <entry>int</entry> <entry><structfield>quality</structfield></entry> - <entry></entry> + <entry>Deprecated. If <link linkend="jpeg-quality-control"><constant> + V4L2_CID_JPEG_IMAGE_QUALITY</constant></link> control is exposed by + a driver applications should use it instead and ignore this field. + </entry> </row> <row> <entry>int</entry> @@ -116,7 +124,11 @@ to add them.</para> <row> <entry>__u32</entry> <entry><structfield>jpeg_markers</structfield></entry> - <entry>See <xref linkend="jpeg-markers" />.</entry> + <entry>See <xref linkend="jpeg-markers"/>. Deprecated. + If <link linkend="jpeg-active-marker-control"><constant> + V4L2_CID_JPEG_ACTIVE_MARKER</constant></link> control + is exposed by a driver applications should use it instead + and ignore this field.</entry> </row> </tbody> </tgroup> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index a9d36e0c090e..bb04eff75f45 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -58,43 +58,43 @@ <para>The ioctls are used to query and configure selection rectangles.</para> -<para> To query the cropping (composing) rectangle set <structfield> -&v4l2-selection;::type </structfield> to the respective buffer type. Do not -use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE +<para> To query the cropping (composing) rectangle set &v4l2-selection; +<structfield> type </structfield> field to the respective buffer type. +Do not use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE </constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is -setting <structfield> &v4l2-selection;::target </structfield> to value -<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> +setting the value of &v4l2-selection; <structfield>target</structfield> field +to <constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional -targets. Fields <structfield> &v4l2-selection;::flags </structfield> and -<structfield> &v4l2-selection;::reserved </structfield> are ignored and they -must be filled with zeros. The driver fills the rest of the structure or +targets. The <structfield>flags</structfield> and <structfield>reserved +</structfield> fields of &v4l2-selection; are ignored and they must be filled +with zeros. The driver fills the rest of the structure or returns &EINVAL; if incorrect buffer type or target was used. If cropping (composing) is not supported then the active rectangle is not mutable and it is -always equal to the bounds rectangle. Finally, structure <structfield> -&v4l2-selection;::r </structfield> is filled with the current cropping +always equal to the bounds rectangle. Finally, the &v4l2-rect; +<structfield>r</structfield> rectangle is filled with the current cropping (composing) coordinates. The coordinates are expressed in driver-dependent units. The only exception are rectangles for images in raw formats, whose coordinates are always expressed in pixels. </para> -<para> To change the cropping (composing) rectangle set <structfield> -&v4l2-selection;::type </structfield> to the respective buffer type. Do not +<para> To change the cropping (composing) rectangle set the &v4l2-selection; +<structfield>type</structfield> field to the respective buffer type. Do not use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE </constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is -setting <structfield> &v4l2-selection;::target </structfield> to value -<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> +setting the value of &v4l2-selection; <structfield>target</structfield> to +<constant>V4L2_SEL_TGT_CROP_ACTIVE</constant> (<constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional -targets. Set desired active area into the field <structfield> -&v4l2-selection;::r </structfield>. Field <structfield> -&v4l2-selection;::reserved </structfield> is ignored and must be filled with -zeros. The driver may adjust the rectangle coordinates. An application may -introduce constraints to control rounding behaviour. Set the field -<structfield> &v4l2-selection;::flags </structfield> to one of values: +targets. The &v4l2-rect; <structfield>r</structfield> rectangle need to be +set to the desired active area. Field &v4l2-selection; <structfield> reserved +</structfield> is ignored and must be filled with zeros. The driver may adjust +coordinates of the requested rectangle. An application may +introduce constraints to control rounding behaviour. The &v4l2-selection; +<structfield>flags</structfield> field must be set to one of the following: <itemizedlist> <listitem> @@ -129,7 +129,7 @@ and vertical offset and sizes are chosen according to following priority: <orderedlist> <listitem> - <para>Satisfy constraints from <structfield>&v4l2-selection;::flags</structfield>.</para> + <para>Satisfy constraints from &v4l2-selection; <structfield>flags</structfield>.</para> </listitem> <listitem> <para>Adjust width, height, left, and top to hardware limits and alignments.</para> @@ -145,7 +145,7 @@ and vertical offset and sizes are chosen according to following priority: </listitem> </orderedlist> -On success the field <structfield> &v4l2-selection;::r </structfield> contains +On success the &v4l2-rect; <structfield>r</structfield> field contains the adjusted rectangle. When the parameters are unsuitable the application may modify the cropping (composing) or image parameters and repeat the cycle until satisfactory parameters have been negotiated. If constraints flags have to be @@ -162,38 +162,38 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <tbody valign="top"> <row> <entry><constant>V4L2_SEL_TGT_CROP_ACTIVE</constant></entry> - <entry>0</entry> - <entry>area that is currently cropped by hardware</entry> + <entry>0x0000</entry> + <entry>The area that is currently cropped by hardware.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry> - <entry>1</entry> - <entry>suggested cropping rectangle that covers the "whole picture"</entry> + <entry>0x0001</entry> + <entry>Suggested cropping rectangle that covers the "whole picture".</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry> - <entry>2</entry> - <entry>limits for the cropping rectangle</entry> + <entry>0x0002</entry> + <entry>Limits for the cropping rectangle.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_ACTIVE</constant></entry> - <entry>256</entry> - <entry>area to which data are composed by hardware</entry> + <entry>0x0100</entry> + <entry>The area to which data is composed by hardware.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry> - <entry>257</entry> - <entry>suggested composing rectangle that covers the "whole picture"</entry> + <entry>0x0101</entry> + <entry>Suggested composing rectangle that covers the "whole picture".</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry> - <entry>258</entry> - <entry>limits for the composing rectangle</entry> + <entry>0x0102</entry> + <entry>Limits for the composing rectangle.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry> - <entry>259</entry> - <entry>the active area and all padding pixels that are inserted or modified by the hardware</entry> + <entry>0x0103</entry> + <entry>The active area and all padding pixels that are inserted or modified by hardware.</entry> </row> </tbody> </tgroup> @@ -209,12 +209,14 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <row> <entry><constant>V4L2_SEL_FLAG_GE</constant></entry> <entry>0x00000001</entry> - <entry>indicate that adjusted rectangle must contain a rectangle from <structfield>&v4l2-selection;::r</structfield></entry> + <entry>Indicates that the adjusted rectangle must contain the original + &v4l2-selection; <structfield>r</structfield> rectangle.</entry> </row> <row> <entry><constant>V4L2_SEL_FLAG_LE</constant></entry> <entry>0x00000002</entry> - <entry>indicate that adjusted rectangle must be inside a rectangle from <structfield>&v4l2-selection;::r</structfield></entry> + <entry>Indicates that the adjusted rectangle must be inside the original + &v4l2-rect; <structfield>r</structfield> rectangle.</entry> </row> </tbody> </tgroup> @@ -245,27 +247,29 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <row> <entry>__u32</entry> <entry><structfield>type</structfield></entry> - <entry>Type of the buffer (from &v4l2-buf-type;)</entry> + <entry>Type of the buffer (from &v4l2-buf-type;).</entry> </row> <row> <entry>__u32</entry> <entry><structfield>target</structfield></entry> - <entry>used to select between <link linkend="v4l2-sel-target"> cropping and composing rectangles </link></entry> + <entry>Used to select between <link linkend="v4l2-sel-target"> cropping + and composing rectangles</link>.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>flags</structfield></entry> - <entry>control over coordinates adjustments, refer to <link linkend="v4l2-sel-flags">selection flags</link></entry> + <entry>Flags controlling the selection rectangle adjustments, refer to + <link linkend="v4l2-sel-flags">selection flags</link>.</entry> </row> <row> <entry>&v4l2-rect;</entry> <entry><structfield>r</structfield></entry> - <entry>selection rectangle</entry> + <entry>The selection rectangle.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>reserved[9]</structfield></entry> - <entry>Reserved fields for future use</entry> + <entry>Reserved fields for future use.</entry> </row> </tbody> </tgroup> @@ -278,24 +282,24 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <varlistentry> <term><errorcode>EINVAL</errorcode></term> <listitem> - <para>The buffer <structfield> &v4l2-selection;::type </structfield> -or <structfield> &v4l2-selection;::target </structfield> is not supported, or -the <structfield> &v4l2-selection;::flags </structfield> are invalid.</para> + <para>Given buffer type <structfield>type</structfield> or +the selection target <structfield>target</structfield> is not supported, +or the <structfield>flags</structfield> argument is not valid.</para> </listitem> </varlistentry> <varlistentry> <term><errorcode>ERANGE</errorcode></term> <listitem> - <para>it is not possible to adjust a rectangle <structfield> -&v4l2-selection;::r </structfield> that satisfies all contraints from -<structfield> &v4l2-selection;::flags </structfield>.</para> + <para>It is not possible to adjust &v4l2-rect; <structfield> +r</structfield> rectangle to satisfy all contraints given in the +<structfield>flags</structfield> argument.</para> </listitem> </varlistentry> <varlistentry> <term><errorcode>EBUSY</errorcode></term> <listitem> - <para>it is not possible to apply change of selection rectangle at the moment. -Usually because streaming is in progress.</para> + <para>It is not possible to apply change of the selection rectangle +at the moment. Usually because streaming is in progress.</para> </listitem> </varlistentry> </variablelist> diff --git a/Documentation/DocBook/media/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml index e3664d6f2de4..4643505cd4ca 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml @@ -124,12 +124,35 @@ printf ("Version: %u.%u.%u\n", <row> <entry>__u32</entry> <entry><structfield>capabilities</structfield></entry> - <entry>Device capabilities, see <xref - linkend="device-capabilities" />.</entry> + <entry>Available capabilities of the physical device as a whole, see <xref + linkend="device-capabilities" />. The same physical device can export + multiple devices in /dev (e.g. /dev/videoX, /dev/vbiY and /dev/radioZ). + The <structfield>capabilities</structfield> field should contain a union + of all capabilities available around the several V4L2 devices exported + to userspace. + For all those devices the <structfield>capabilities</structfield> field + returns the same set of capabilities. This allows applications to open + just one of the devices (typically the video device) and discover whether + video, vbi and/or radio are also supported. + </entry> </row> <row> <entry>__u32</entry> - <entry><structfield>reserved</structfield>[4]</entry> + <entry><structfield>device_caps</structfield></entry> + <entry>Device capabilities of the opened device, see <xref + linkend="device-capabilities" />. Should contain the available capabilities + of that specific device node. So, for example, <structfield>device_caps</structfield> + of a radio device will only contain radio related capabilities and + no video or vbi capabilities. This field is only set if the <structfield>capabilities</structfield> + field contains the <constant>V4L2_CAP_DEVICE_CAPS</constant> capability. + Only the <structfield>capabilities</structfield> field can have the + <constant>V4L2_CAP_DEVICE_CAPS</constant> capability, <structfield>device_caps</structfield> + will never set <constant>V4L2_CAP_DEVICE_CAPS</constant>. + </entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[3]</entry> <entry>Reserved for future extensions. Drivers must set this array to zero.</entry> </row> @@ -276,6 +299,13 @@ linkend="async">asynchronous</link> I/O methods.</entry> <entry>The device supports the <link linkend="mmap">streaming</link> I/O method.</entry> </row> + <row> + <entry><constant>V4L2_CAP_DEVICE_CAPS</constant></entry> + <entry>0x80000000</entry> + <entry>The driver fills the <structfield>device_caps</structfield> + field. This capability can only appear in the <structfield>capabilities</structfield> + field and never in the <structfield>device_caps</structfield> field.</entry> + </row> </tbody> </tgroup> </table> diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index e013da845b11..18b1a8266f7c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -96,8 +96,8 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> <row> <entry>__u32</entry> <entry><structfield>reserved</structfield>[7]</entry> - <entry>Reserved for future extensions. Drivers and - applications must set the array to zero.</entry> + <entry>Reserved for future extensions. Applications + must set the array to zero.</entry> </row> </tbody> </tgroup> @@ -112,7 +112,7 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> <term><errorcode>EINVAL</errorcode></term> <listitem> <para>The <structfield>tuner</structfield> index is out of -bounds or the value in the <structfield>type</structfield> field is +bounds, the wrap_around value is not supported or the value in the <structfield>type</structfield> field is wrong.</para> </listitem> </varlistentry> diff --git a/Documentation/dvb/cards.txt b/Documentation/dvb/cards.txt index cc09187a5db7..97709e9a3076 100644 --- a/Documentation/dvb/cards.txt +++ b/Documentation/dvb/cards.txt @@ -119,4 +119,5 @@ o Cards based on the Phillips saa7134 PCI bridge: - Compro Videomate DVB-T300 - Compro Videomate DVB-T200 - AVerMedia AVerTVHD MCE A180 + - KWorld PC150-U ATSC Hybrid diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt index 10b5f0411386..f4b720a14675 100644 --- a/Documentation/dvb/lmedm04.txt +++ b/Documentation/dvb/lmedm04.txt @@ -66,5 +66,16 @@ dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw For LME2510C dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw +--------------------------------------------------------------------- + +The m88rs2000 tuner driver can be found in windows/system32/drivers + +US2B0D.sys (dated 29 Jun 2010) + +dd if=US2B0D.sys ibs=1 skip=34432 count=3871 of=dvb-usb-lme2510c-rs2000.fw + +We need to modify id of rs2000 firmware or it will warm boot id 3344:1120. + +echo -ne \\xF0\\x22 | dd conv=notrunc bs=1 count=2 seek=266 of=dvb-usb-lme2510c-rs2000.fw Copy the firmware file(s) to /lib/firmware diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 23584d0c6a75..f316d1816fcd 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -32,3 +32,4 @@ 31 -> Leadtek Winfast PxDVR3200 H XC4000 [107d:6f39] 32 -> MPX-885 33 -> Mygica X8507 [14f1:8502] + 34 -> TerraTec Cinergy T PCIe Dual [153b:117e] diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index eee18e6962b6..fa4b3f947468 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -59,7 +59,7 @@ 58 -> Pinnacle PCTV HD 800i [11bd:0051] 59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530] 60 -> Pinnacle Hybrid PCTV [12ab:1788] - 61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618] + 61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618,107d:6619] 62 -> PowerColor RA330 [14f1:ea3d] 63 -> Geniatech X8000-MT DVBT [14f1:8852] 64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30] @@ -87,3 +87,5 @@ 86 -> TeVii S464 DVB-S/S2 [d464:9022] 87 -> Leadtek WinFast DTV2000 H PLUS [107d:6f42] 88 -> Leadtek WinFast DTV1800 H (XC4000) [107d:6f38] + 89 -> Leadtek TV2000 XP Global (SC4100) [107d:6f36] + 90 -> Leadtek TV2000 XP Global (XC4100) [107d:6f43] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index e7be3ac49ead..d99262dda533 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -7,7 +7,7 @@ 6 -> Terratec Cinergy 200 USB (em2800) 7 -> Leadtek Winfast USB II (em2800) [0413:6023] 8 -> Kworld USB2800 (em2800) - 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a] + 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a,093b:a003] 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] 11 -> Terratec Hybrid XS (em2880) 12 -> Kworld PVR TV 2800 RF (em2820/em2840) @@ -61,7 +61,7 @@ 61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840) 62 -> Gadmei TVR200 (em2820/em2840) 63 -> Kaiomy TVnPC U2 (em2860) [eb1a:e303] - 64 -> Easy Cap Capture DC-60 (em2860) + 64 -> Easy Cap Capture DC-60 (em2860) [1b80:e309] 65 -> IO-DATA GV-MVP/SZ (em2820/em2840) [04bb:0515] 66 -> Empire dual TV (em2880) 67 -> Terratec Grabby (em2860) [0ccd:0096,0ccd:10AF] @@ -76,7 +76,11 @@ 76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340] 77 -> EM2874 Leadership ISDBT (em2874) 78 -> PCTV nanoStick T2 290e (em28174) - 79 -> Terratec Cinergy H5 (em2884) [0ccd:10a2,0ccd:10ad] + 79 -> Terratec Cinergy H5 (em2884) [0ccd:008e,0ccd:00ac,0ccd:10a2,0ccd:10ad] 80 -> PCTV DVB-S2 Stick (460e) (em28174) 81 -> Hauppauge WinTV HVR 930C (em2884) [2040:1605] 82 -> Terratec Cinergy HTC Stick (em2884) [0ccd:00b2] + 83 -> Honestech Vidbox NW03 (em2860) [eb1a:5006] + 84 -> MaxMedia UB425-TC (em2874) [1b80:e425] + 85 -> PCTV QuatroStick (510e) (em2884) [2304:0242] + 86 -> PCTV QuatroStick nano (520e) (em2884) [2013:0251] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index e7ef38a19859..34f3b330e5f4 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -187,3 +187,4 @@ 186 -> Beholder BeholdTV 501 [5ace:5010] 187 -> Beholder BeholdTV 503 FM [5ace:5030] 188 -> Sensoray 811/911 [6000:0811,6000:0911] +189 -> Kworld PC150-U [17de:a134] diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 6323b7a20719..c83f6e418879 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -78,10 +78,11 @@ tuner=77 - TCL tuner MF02GIP-5N-E tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner tuner=79 - Philips PAL/SECAM multi (FM1216 MK5) tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough -tuner=81 - Xceive 4000 tuner tuner=81 - Partsnic (Daewoo) PTI-5NF05 tuner=82 - Philips CU1216L tuner=83 - NXP TDA18271 tuner=84 - Sony BTF-Pxn01Z tuner=85 - Philips FQ1236 MK5 tuner=86 - Tena TNF5337 MFD +tuner=87 - Xceive 4000 tuner +tuner=88 - Xceive 5000C tuner diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt new file mode 100644 index 000000000000..eb049708f3e4 --- /dev/null +++ b/Documentation/video4linux/fimc.txt @@ -0,0 +1,178 @@ +Samsung S5P/EXYNOS4 FIMC driver + +Copyright (C) 2012 Samsung Electronics Co., Ltd. +--------------------------------------------------------------------------- + +The FIMC (Fully Interactive Mobile Camera) device available in Samsung +SoC Application Processors is an integrated camera host interface, color +space converter, image resizer and rotator. It's also capable of capturing +data from LCD controller (FIMD) through the SoC internal writeback data +path. There are multiple FIMC instances in the SoCs (up to 4), having +slightly different capabilities, like pixel alignment constraints, rotator +availability, LCD writeback support, etc. The driver is located at +drivers/media/video/s5p-fimc directory. + +1. Supported SoCs +================= + +S5PC100 (mem-to-mem only), S5PV210, EXYNOS4210 + +2. Supported features +===================== + + - camera parallel interface capture (ITU-R.BT601/565); + - camera serial interface capture (MIPI-CSI2); + - memory-to-memory processing (color space conversion, scaling, mirror + and rotation); + - dynamic pipeline re-configuration at runtime (re-attachment of any FIMC + instance to any parallel video input or any MIPI-CSI front-end); + - runtime PM and system wide suspend/resume + +Not currently supported: + - LCD writeback input + - per frame clock gating (mem-to-mem) + +3. Files partitioning +===================== + +- media device driver + drivers/media/video/s5p-fimc/fimc-mdevice.[ch] + + - camera capture video device driver + drivers/media/video/s5p-fimc/fimc-capture.c + + - MIPI-CSI2 receiver subdev + drivers/media/video/s5p-fimc/mipi-csis.[ch] + + - video post-processor (mem-to-mem) + drivers/media/video/s5p-fimc/fimc-core.c + + - common files + drivers/media/video/s5p-fimc/fimc-core.h + drivers/media/video/s5p-fimc/fimc-reg.h + drivers/media/video/s5p-fimc/regs-fimc.h + +4. User space interfaces +======================== + +4.1. Media device interface + +The driver supports Media Controller API as defined at +http://http://linuxtv.org/downloads/v4l-dvb-apis/media_common.html +The media device driver name is "SAMSUNG S5P FIMC". + +The purpose of this interface is to allow changing assignment of FIMC instances +to the SoC peripheral camera input at runtime and optionally to control internal +connections of the MIPI-CSIS device(s) to the FIMC entities. + +The media device interface allows to configure the SoC for capturing image +data from the sensor through more than one FIMC instance (e.g. for simultaneous +viewfinder and still capture setup). +Reconfiguration is done by enabling/disabling media links created by the driver +during initialization. The internal device topology can be easily discovered +through media entity and links enumeration. + +4.2. Memory-to-memory video node + +V4L2 memory-to-memory interface at /dev/video? device node. This is standalone +video device, it has no media pads. However please note the mem-to-mem and +capture video node operation on same FIMC instance is not allowed. The driver +detects such cases but the applications should prevent them to avoid an +undefined behaviour. + +4.3. Capture video node + +The driver supports V4L2 Video Capture Interface as defined at: +http://linuxtv.org/downloads/v4l-dvb-apis/devices.html + +At the capture and mem-to-mem video nodes only the multi-planar API is +supported. For more details see: +http://linuxtv.org/downloads/v4l-dvb-apis/planar-apis.html + +4.4. Camera capture subdevs + +Each FIMC instance exports a sub-device node (/dev/v4l-subdev?), a sub-device +node is also created per each available and enabled at the platform level +MIPI-CSI receiver device (currently up to two). + +4.5. sysfs + +In order to enable more precise camera pipeline control through the sub-device +API the driver creates a sysfs entry associated with "s5p-fimc-md" platform +device. The entry path is: /sys/platform/devices/s5p-fimc-md/subdev_conf_mode. + +In typical use case there could be a following capture pipeline configuration: +sensor subdev -> mipi-csi subdev -> fimc subdev -> video node + +When we configure these devices through sub-device API at user space, the +configuration flow must be from left to right, and the video node is +configured as last one. +When we don't use sub-device user space API the whole configuration of all +devices belonging to the pipeline is done at the video node driver. +The sysfs entry allows to instruct the capture node driver not to configure +the sub-devices (format, crop), to avoid resetting the subdevs' configuration +when the last configuration steps at the video node is performed. + +For full sub-device control support (subdevs configured at user space before +starting streaming): +# echo "sub-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode + +For V4L2 video node control only (subdevs configured internally by the host +driver): +# echo "vid-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode +This is a default option. + +5. Device mapping to video and subdev device nodes +================================================== + +There are associated two video device nodes with each device instance in +hardware - video capture and mem-to-mem and additionally a subdev node for +more precise FIMC capture subsystem control. In addition a separate v4l2 +sub-device node is created per each MIPI-CSIS device. + +How to find out which /dev/video? or /dev/v4l-subdev? is assigned to which +device? + +You can either grep through the kernel log to find relevant information, i.e. +# dmesg | grep -i fimc +(note that udev, if present, might still have rearranged the video nodes), + +or retrieve the information from /dev/media? with help of the media-ctl tool: +# media-ctl -p + +6. Platform support +=================== + +The machine code (plat-s5p and arch/arm/mach-*) must select following options + +CONFIG_S5P_DEV_FIMC0 mandatory +CONFIG_S5P_DEV_FIMC1 \ +CONFIG_S5P_DEV_FIMC2 | optional +CONFIG_S5P_DEV_FIMC3 | +CONFIG_S5P_SETUP_FIMC / +CONFIG_S5P_SETUP_MIPIPHY \ +CONFIG_S5P_DEV_CSIS0 | optional for MIPI-CSI interface +CONFIG_S5P_DEV_CSIS1 / + +Except that, relevant s5p_device_fimc? should be registered in the machine code +in addition to a "s5p-fimc-md" platform device to which the media device driver +is bound. The "s5p-fimc-md" device instance is required even if only mem-to-mem +operation is used. + +The description of sensor(s) attached to FIMC/MIPI-CSIS camera inputs should be +passed as the "s5p-fimc-md" device platform_data. The platform data structure +is defined in file include/media/s5p_fimc.h. + +7. Build +======== + +This driver depends on following config options: +PLAT_S5P, +PM_RUNTIME, +I2C, +REGULATOR, +VIDEO_V4L2_SUBDEV_API, + +If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m) +two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and +optional s5p-csis.ko (MIPI-CSI receiver subdev). diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index f2060f0dc02c..e6c2842407a4 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -217,6 +217,7 @@ ov534_9 06f8:3003 Hercules Dualpix HD Weblog sonixj 06f8:3004 Hercules Classic Silver sonixj 06f8:3008 Hercules Deluxe Optical Glass pac7302 06f8:3009 Hercules Classic Link +pac7302 06f8:301b Hercules Link nw80x 0728:d001 AVerMedia Camguard spca508 0733:0110 ViewQuest VQ110 spca501 0733:0401 Intel Create and Share diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 88fe00a146e3..dc2d7a511d9b 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -661,7 +661,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "dma", dma_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "brom", brom_clk) - _REGISTER_CLOCK(NULL, "emma", emma_clk) + _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 2f727d7c380c..28537a5d9048 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -50,6 +50,8 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) +#define imx27_add_mx2_emmaprp(pdata) \ + imx_add_mx2_emmaprp(&imx27_mx2_camera_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; #define imx27_add_mxc_ehci_otg(pdata) \ diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/plat-mxc/devices/platform-mx2-camera.c index b3f4828dc447..11eace953a09 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-camera.c +++ b/arch/arm/plat-mxc/devices/platform-mx2-camera.c @@ -62,3 +62,21 @@ struct platform_device *__init imx_add_mx2_camera( res, data->iobaseemmaprp ? 4 : 2, pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_camera_data *data) +{ + struct resource res[] = { + { + .start = data->iobaseemmaprp, + .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqemmaprp, + .end = data->irqemmaprp, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index def9ba53e23a..1b2258daa05b 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -223,6 +223,8 @@ struct imx_mx2_camera_data { struct platform_device *__init imx_add_mx2_camera( const struct imx_mx2_camera_data *data, const struct mx2_camera_platform_data *pdata); +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_camera_data *data); #include <mach/mxc_ehci.h> struct imx_mxc_ehci_data { diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 70ca07f10d5c..4da66b4b977c 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2026,6 +2026,16 @@ static bool hid_ignore(struct hid_device *hdev) if (hdev->product >= USB_DEVICE_ID_LOGITECH_HARMONY_FIRST && hdev->product <= USB_DEVICE_ID_LOGITECH_HARMONY_LAST) return true; + /* + * The Keene FM transmitter USB device has the same USB ID as + * the Logitech AudioHub Speaker, but it should ignore the hid. + * Check if the name is that of the Keene device. + * For reference: the name of the AudioHub is + * "HOLTEK AudioHub Speaker". + */ + if (hdev->product == USB_DEVICE_ID_LOGITECH_AUDIOHUB && + !strcmp(hdev->name, "HOLTEK B-LINK USB Audio ")) + return true; break; case USB_VENDOR_ID_SOUNDGRAPH: if (hdev->product >= USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST && diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 2a5cef2f53a7..e39aecb1f9f2 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -471,6 +471,7 @@ #define USB_DEVICE_ID_LG_MULTITOUCH 0x0064 #define USB_VENDOR_ID_LOGITECH 0x046d +#define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e #define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110 #define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile index 8295854ab94b..f80407eb8998 100644 --- a/drivers/media/common/tuners/Makefile +++ b/drivers/media/common/tuners/Makefile @@ -29,5 +29,5 @@ obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/common/tuners/max2165.c index cb2c98fbad1b..ba84936aafd6 100644 --- a/drivers/media/common/tuners/max2165.c +++ b/drivers/media/common/tuners/max2165.c @@ -168,7 +168,7 @@ int fixpt_div32(u32 dividend, u32 divisor, u32 *quotient, u32 *fraction) int i; if (0 == divisor) - return -1; + return -EINVAL; q = dividend / divisor; remainder = dividend - q * divisor; @@ -194,10 +194,13 @@ static int max2165_set_rf(struct max2165_priv *priv, u32 freq) u8 tf_ntch; u32 t; u32 quotient, fraction; + int ret; /* Set PLL divider according to RF frequency */ - fixpt_div32(freq / 1000, priv->config->osc_clk * 1000, - "ient, &fraction); + ret = fixpt_div32(freq / 1000, priv->config->osc_clk * 1000, + "ient, &fraction); + if (ret != 0) + return ret; /* 20-bit fraction */ fraction >>= 12; diff --git a/drivers/media/common/tuners/mt2063.c b/drivers/media/common/tuners/mt2063.c index c89af3cd5eba..0ed9091ff48e 100644 --- a/drivers/media/common/tuners/mt2063.c +++ b/drivers/media/common/tuners/mt2063.c @@ -350,7 +350,7 @@ static int MT2063_Sleep(struct dvb_frontend *fe) /* * ToDo: Add code here to implement a OS blocking */ - msleep(10); + msleep(100); return 0; } @@ -2226,7 +2226,7 @@ static struct dvb_tuner_ops mt2063_ops = { .info = { .name = "MT2063 Silicon Tuner", .frequency_min = 45000000, - .frequency_max = 850000000, + .frequency_max = 865000000, .frequency_step = 0, }, diff --git a/drivers/media/common/tuners/mt2063.h b/drivers/media/common/tuners/mt2063.h index 62d0e8ec4e99..3f5cfd93713f 100644 --- a/drivers/media/common/tuners/mt2063.h +++ b/drivers/media/common/tuners/mt2063.h @@ -23,10 +23,6 @@ static inline struct dvb_frontend *mt2063_attach(struct dvb_frontend *fe, return NULL; } -int mt2063_setTune(struct dvb_frontend *fe, u32 f_in, - u32 bw_in, - enum MTTune_atv_standard tv_type); - /* FIXME: Should use the standard DVB attachment interfaces */ unsigned int tuner_MT2063_SoftwareShutdown(struct dvb_frontend *fe); unsigned int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe); diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index e13683bab6b3..2da4440c16ee 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1868,6 +1868,10 @@ struct tunertype tuners[] = { .params = tuner_tena_tnf_5337_params, .count = ARRAY_SIZE(tuner_tena_tnf_5337_params), }, + [TUNER_XC5000C] = { /* Xceive 5000C */ + .name = "Xceive 5000C tuner", + /* see xc5000.c for details */ + }, }; EXPORT_SYMBOL(tuners); diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 296df05b8cda..7f98984e4fad 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -49,9 +49,6 @@ static LIST_HEAD(hybrid_tuner_instance_list); #define dprintk(level, fmt, arg...) if (debug >= level) \ printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) -#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.6.114.fw" -#define XC5000_DEFAULT_FIRMWARE_SIZE 12401 - struct xc5000_priv { struct tuner_i2c_props i2c_props; struct list_head hybrid_tuner_instance_list; @@ -62,6 +59,8 @@ struct xc5000_priv { u8 video_standard; u8 rf_mode; u8 radio_input; + + int chip_id; }; /* Misc Defines */ @@ -204,6 +203,33 @@ static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"FM Radio-INPUT1_MONO", 0x0278, 0x9002} }; + +struct xc5000_fw_cfg { + char *name; + u16 size; +}; + +static const struct xc5000_fw_cfg xc5000a_1_6_114 = { + .name = "dvb-fe-xc5000-1.6.114.fw", + .size = 12401, +}; + +static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = { + .name = "dvb-fe-xc5000c-41.024.5-31875.fw", + .size = 16503, +}; + +static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) +{ + switch (chip_id) { + default: + case XC5000A: + return &xc5000a_1_6_114; + case XC5000C: + return &xc5000c_41_024_5_31875; + } +} + static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val); @@ -552,12 +578,14 @@ static int xc5000_fwupload(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; const struct firmware *fw; int ret; + const struct xc5000_fw_cfg *desired_fw = + xc5000_assign_firmware(priv->chip_id); /* request the firmware, this will block and timeout */ printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", - XC5000_DEFAULT_FIRMWARE); + desired_fw->name); - ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, + ret = request_firmware(&fw, desired_fw->name, priv->i2c_props.adap->dev.parent); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); @@ -569,7 +597,7 @@ static int xc5000_fwupload(struct dvb_frontend *fe) ret = XC_RESULT_SUCCESS; } - if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) { + if (fw->size != desired_fw->size) { printk(KERN_ERR "xc5000: firmware incorrect size\n"); ret = XC_RESULT_RESET_FAILURE; } else { @@ -1139,6 +1167,13 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, if (priv->radio_input == 0) priv->radio_input = cfg->radio_input; + /* don't override chip id if it's already been set + unless explicitly specified */ + if ((priv->chip_id == 0) || (cfg->chip_id)) + /* use default chip id if none specified, set to 0 so + it can be overridden if this is a hybrid driver */ + priv->chip_id = (cfg->chip_id) ? cfg->chip_id : 0; + /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. */ diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index e2957451b532..3396f8e02b40 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -27,10 +27,15 @@ struct dvb_frontend; struct i2c_adapter; +#define XC5000A 1 +#define XC5000C 2 + struct xc5000_config { u8 i2c_address; u32 if_khz; u8 radio_input; + + int chip_id; }; /* xc5000 callback command */ diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c index ce4f85849e7b..d88c4aa7d24d 100644 --- a/drivers/media/dvb/ddbridge/ddbridge-core.c +++ b/drivers/media/dvb/ddbridge/ddbridge-core.c @@ -578,6 +578,7 @@ static int demod_attach_drxk(struct ddb_input *input) struct drxk_config config; memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; config.adr = 0x29 + (input->nr & 1); fe = input->fe = dvb_attach(drxk_attach, &config, i2c); diff --git a/drivers/media/dvb/ddbridge/ddbridge.h b/drivers/media/dvb/ddbridge/ddbridge.h index 6d14893218f4..8b1b41d2a52d 100644 --- a/drivers/media/dvb/ddbridge/ddbridge.h +++ b/drivers/media/dvb/ddbridge/ddbridge.h @@ -32,8 +32,6 @@ #include <asm/dma.h> #include <linux/dvb/frontend.h> #include <linux/dvb/ca.h> -#include <linux/dvb/video.h> -#include <linux/dvb/audio.h> #include <linux/socket.h> #include "dmxdev.h" diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index fbbe545a74cb..4555baa383b2 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -655,6 +655,8 @@ restart: dprintk("%s: Retune requested, FESTATE_RETUNE\n", __func__); re_tune = true; fepriv->state = FESTATE_TUNED; + } else { + re_tune = false; } if (fe->ops.tune) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 9f203c6767a6..63bf45679f98 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -361,6 +361,14 @@ config DVB_USB_EC168 help Say Y here to support the E3C EC168 DVB-T USB2.0 receiver. +config DVB_USB_AZ6007 + tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_DRXK if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE + help + Say Y here to support theAfatech AF9005 based DVB-T/DVB-C receivers. + config DVB_USB_AZ6027 tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" depends on DVB_USB @@ -378,6 +386,7 @@ config DVB_USB_LME2510 select DVB_IX2505V if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_M88RS2000 if !DVB_FE_CUSTOMISE help Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 . @@ -403,3 +412,13 @@ config DVB_USB_MXL111SF select VIDEO_TVEEPROM help Say Y here to support the MxL111SF USB2.0 DTV receiver. + +config DVB_USB_RTL28XXU + tristate "Realtek RTL28xxU DVB USB support" + depends on DVB_USB && EXPERIMENTAL + select DVB_RTL2830 + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE + help + Say Y here to support the Realtek RTL28xxU DVB USB receiver. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 26c8b9e57050..b76acb5387e6 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -54,7 +54,6 @@ obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o dvb-usb-opera-objs = opera1.o obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o - dvb-usb-af9005-objs = af9005.o af9005-fe.o obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o @@ -88,6 +87,9 @@ obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o dvb-usb-ec168-objs = ec168.o obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o +dvb-usb-az6007-objs = az6007.o +obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o + dvb-usb-az6027-objs = az6027.o obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o @@ -105,8 +107,12 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ +dvb-usb-rtl28xxu-objs = rtl28xxu.o +obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o + +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/ # due to tuner-xc3028 -ccflags-y += -Idrivers/media/common/tuners -EXTRA_CFLAGS += -Idrivers/media/dvb/ttpci +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/ttpci diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 282a43d648df..7e70ea50ef26 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1164,6 +1164,41 @@ static int af9015_af9013_sleep(struct dvb_frontend *fe) return ret; } +/* override tuner callbacks for resource locking */ +static int af9015_tuner_init(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->tuner_init[adap->id](fe); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + +/* override tuner callbacks for resource locking */ +static int af9015_tuner_sleep(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->tuner_sleep[adap->id](fe); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + + static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) { int ret; @@ -1283,6 +1318,7 @@ static struct mxl5007t_config af9015_mxl5007t_config = { static int af9015_tuner_attach(struct dvb_usb_adapter *adap) { int ret; + struct af9015_state *state = adap->dev->priv; deb_info("%s:\n", __func__); switch (af9015_af9013_config[adap->id].tuner) { @@ -1340,6 +1376,19 @@ static int af9015_tuner_attach(struct dvb_usb_adapter *adap) err("Unknown tuner id:%d", af9015_af9013_config[adap->id].tuner); } + + if (adap->fe_adap[0].fe->ops.tuner_ops.init) { + state->tuner_init[adap->id] = + adap->fe_adap[0].fe->ops.tuner_ops.init; + adap->fe_adap[0].fe->ops.tuner_ops.init = af9015_tuner_init; + } + + if (adap->fe_adap[0].fe->ops.tuner_ops.sleep) { + state->tuner_sleep[adap->id] = + adap->fe_adap[0].fe->ops.tuner_ops.sleep; + adap->fe_adap[0].fe->ops.tuner_ops.sleep = af9015_tuner_sleep; + } + return ret; } diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index f619063fa72f..2f68419e899b 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -108,6 +108,8 @@ struct af9015_state { int (*read_status[2]) (struct dvb_frontend *fe, fe_status_t *status); int (*init[2]) (struct dvb_frontend *fe); int (*sleep[2]) (struct dvb_frontend *fe); + int (*tuner_init[2]) (struct dvb_frontend *fe); + int (*tuner_sleep[2]) (struct dvb_frontend *fe); }; struct af9015_config { diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index cf0c318d6989..03c28655af1b 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -58,7 +58,7 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) { struct anysee_state *state = d->priv; - int act_len, ret; + int act_len, ret, i; u8 buf[64]; memcpy(&buf[0], sbuf, slen); @@ -73,26 +73,52 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, /* We need receive one message more after dvb_usb_generic_rw due to weird transaction flow, which is 1 x send + 2 x receive. */ ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); - if (!ret) { + if (ret) + goto error_unlock; + + /* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32 + * (EPIPE, Broken pipe). Function supports currently msleep() as a + * parameter but I would not like to use it, since according to + * Documentation/timers/timers-howto.txt it should not be used such + * short, under < 20ms, sleeps. Repeating failed message would be + * better choice as not to add unwanted delays... + * Fixing that correctly is one of those or both; + * 1) use repeat if possible + * 2) add suitable delay + */ + + /* get answer, retry few times if error returned */ + for (i = 0; i < 3; i++) { /* receive 2nd answer */ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), &act_len, 2000); - if (ret) - err("%s: recv bulk message failed: %d", __func__, ret); - else { + + if (ret) { + deb_info("%s: recv bulk message failed: %d", + __func__, ret); + } else { deb_xfer("<<< "); debug_dump(buf, rlen, deb_xfer); if (buf[63] != 0x4f) deb_info("%s: cmd failed\n", __func__); + + break; } } + if (ret) { + /* all retries failed, it is fatal */ + err("%s: recv bulk message failed: %d", __func__, ret); + goto error_unlock; + } + /* read request, copy returned data to return buf */ - if (!ret && rbuf && rlen) + if (rbuf && rlen) memcpy(rbuf, buf, rlen); +error_unlock: mutex_unlock(&anysee_usb_mutex); return ret; diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/dvb/dvb-usb/az6007.c new file mode 100644 index 000000000000..4008b9c50fbd --- /dev/null +++ b/drivers/media/dvb/dvb-usb/az6007.c @@ -0,0 +1,957 @@ +/* + * Driver for AzureWave 6007 DVB-C/T USB2.0 and clones + * + * Copyright (c) Henry Wang <Henry.wang@AzureWave.com> + * + * This driver was made publicly available by Terratec, at: + * http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz + * The original driver's license is GPL, as declared with MODULE_LICENSE() + * + * Copyright (c) 2010-2011 Mauro Carvalho Chehab <mchehab@redhat.com> + * Driver modified by in order to work with upstream drxk driver, and + * tons of bugs got fixed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation under version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "drxk.h" +#include "mt2063.h" +#include "dvb_ca_en50221.h" + +#define DVB_USB_LOG_PREFIX "az6007" +#include "dvb-usb.h" + +/* debug */ +int dvb_usb_az6007_debug; +module_param_named(debug, dvb_usb_az6007_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." + DVB_USB_DEBUG_STATUS); + +#define deb_info(args...) dprintk(dvb_usb_az6007_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_az6007_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_az6007_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_az6007_debug, 0x08, args) + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* Known requests (Cypress FX2 firmware + az6007 "private" ones*/ + +#define FX2_OED 0xb5 +#define AZ6007_READ_DATA 0xb7 +#define AZ6007_I2C_RD 0xb9 +#define AZ6007_POWER 0xbc +#define AZ6007_I2C_WR 0xbd +#define FX2_SCON1 0xc0 +#define AZ6007_TS_THROUGH 0xc7 +#define AZ6007_READ_IR 0xb4 + +struct az6007_device_state { + struct mutex mutex; + struct mutex ca_mutex; + struct dvb_ca_en50221 ca; + unsigned warm:1; + int (*gate_ctrl) (struct dvb_frontend *, int); + unsigned char data[4096]; +}; + +static struct drxk_config terratec_h7_drxk = { + .adr = 0x29, + .parallel_ts = true, + .dynamic_clk = true, + .single_master = true, + .enable_merr_cfg = true, + .no_i2c_bridge = false, + .chunk_size = 64, + .mpeg_out_clk_strength = 0x02, + .microcode_name = "dvb-usb-terratec-h7-drxk.fw", +}; + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct dvb_usb_adapter *adap = fe->sec_priv; + struct az6007_device_state *st; + int status = 0; + + deb_info("%s: %s\n", __func__, enable ? "enable" : "disable"); + + if (!adap) + return -EINVAL; + + st = adap->dev->priv; + + if (!st) + return -EINVAL; + + if (enable) + status = st->gate_ctrl(fe, 1); + else + status = st->gate_ctrl(fe, 0); + + return status; +} + +static struct mt2063_config az6007_mt2063_config = { + .tuner_address = 0x60, + .refclock = 36125000, +}; + +static int __az6007_read(struct usb_device *udev, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + ret = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_IN, + value, index, b, blen, 5000); + if (ret < 0) { + warn("usb read operation failed. (%d)", ret); + return -EIO; + } + + deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, + index); + debug_dump(b, blen, deb_xfer); + + return ret; +} + +static int az6007_read(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct az6007_device_state *st = d->priv; + int ret; + + if (mutex_lock_interruptible(&st->mutex) < 0) + return -EAGAIN; + + ret = __az6007_read(d->udev, req, value, index, b, blen); + + mutex_unlock(&st->mutex); + + return ret; +} + +static int __az6007_write(struct usb_device *udev, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, + index); + debug_dump(b, blen, deb_xfer); + + if (blen > 64) { + err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n", + blen); + return -EOPNOTSUPP; + } + + ret = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_OUT, + value, index, b, blen, 5000); + if (ret != blen) { + err("usb write operation failed. (%d)", ret); + return -EIO; + } + + return 0; +} + +static int az6007_write(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct az6007_device_state *st = d->priv; + int ret; + + if (mutex_lock_interruptible(&st->mutex) < 0) + return -EAGAIN; + + ret = __az6007_write(d->udev, req, value, index, b, blen); + + mutex_unlock(&st->mutex); + + return ret; +} + +static int az6007_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dvb_usb_device *d = adap->dev; + + deb_info("%s: %s", __func__, onoff ? "enable" : "disable"); + + return az6007_write(d, 0xbc, onoff, 0, NULL, 0); +} + +/* remote control stuff (does not work with my box) */ +static int az6007_rc_query(struct dvb_usb_device *d) +{ + struct az6007_device_state *st = d->priv; + unsigned code = 0; + + az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10); + + if (st->data[1] == 0x44) + return 0; + + if ((st->data[1] ^ st->data[2]) == 0xff) + code = st->data[1]; + else + code = st->data[1] << 8 | st->data[2]; + + if ((st->data[3] ^ st->data[4]) == 0xff) + code = code << 8 | st->data[3]; + else + code = code << 16 | st->data[3] << 8 | st->data[4]; + + rc_keydown(d->rc_dev, code, st->data[5]); + + return 0; +} + +static int az6007_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + if (slot != 0) + return -EINVAL; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); + + req = 0xC1; + value = address; + index = 0; + blen = 1; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + ret = b[0]; + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + +static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + deb_info("%s %d", __func__, slot); + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC2; + value1 = address; + index = value; + blen = 0; + + ret = az6007_write(d, req, value1, index, NULL, blen); + if (ret != 0) + warn("usb out operation failed. (%d)", ret); + + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6007_ci_read_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + if (slot != 0) + return -EINVAL; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); + + req = 0xC3; + value = address; + index = 0; + blen = 2; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + if (b[0] == 0) + warn("Read CI IO error"); + + ret = b[1]; + deb_info("read cam data = %x from 0x%x", b[1], value); + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + +static int az6007_ci_write_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC4; + value1 = address; + index = value; + blen = 0; + + ret = az6007_write(d, req, value1, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + req = 0xC8; + value = 0; + index = 0; + blen = 1; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else{ + ret = b[0]; + } + kfree(b); + return ret; +} + +static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret, i; + u8 req; + u16 value; + u16 index; + int blen; + + mutex_lock(&state->ca_mutex); + + req = 0xC6; + value = 1; + index = 0; + blen = 0; + + ret = az6007_write(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + msleep(500); + req = 0xC6; + value = 0; + index = 0; + blen = 0; + + ret = az6007_write(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + for (i = 0; i < 15; i++) { + msleep(100); + + if (CI_CamReady(ca, slot)) { + deb_info("CAM Ready"); + break; + } + } + msleep(5000); + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6007_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + return 0; +} + +static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + deb_info("%s", __func__); + mutex_lock(&state->ca_mutex); + req = 0xC7; + value = 1; + index = 0; + blen = 0; + + ret = az6007_write(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6007_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + mutex_lock(&state->ca_mutex); + + req = 0xC5; + value = 0; + index = 0; + blen = 1; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else + ret = 0; + + if (!ret && b[0] == 1) { + ret = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + + +static void az6007_ci_uninit(struct dvb_usb_device *d) +{ + struct az6007_device_state *state; + + deb_info("%s", __func__); + + if (NULL == d) + return; + + state = (struct az6007_device_state *)d->priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + + memset(&state->ca, 0, sizeof(state->ca)); +} + + +static int az6007_ci_init(struct dvb_usb_adapter *a) +{ + struct dvb_usb_device *d = a->dev; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + int ret; + + deb_info("%s", __func__); + + mutex_init(&state->ca_mutex); + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = az6007_ci_read_attribute_mem; + state->ca.write_attribute_mem = az6007_ci_write_attribute_mem; + state->ca.read_cam_control = az6007_ci_read_cam_control; + state->ca.write_cam_control = az6007_ci_write_cam_control; + state->ca.slot_reset = az6007_ci_slot_reset; + state->ca.slot_shutdown = az6007_ci_slot_shutdown; + state->ca.slot_ts_enable = az6007_ci_slot_ts_enable; + state->ca.poll_slot_status = az6007_ci_poll_slot_status; + state->ca.data = d; + + ret = dvb_ca_en50221_init(&a->dvb_adap, + &state->ca, + 0, /* flags */ + 1);/* n_slots */ + if (ret != 0) { + err("Cannot initialize CI: Error %d.", ret); + memset(&state->ca, 0, sizeof(state->ca)); + return ret; + } + + deb_info("CI initialized."); + + return 0; +} + +static int az6007_read_mac_addr(struct dvb_usb_device *d, u8 mac[6]) +{ + struct az6007_device_state *st = d->priv; + int ret; + + ret = az6007_read(d, AZ6007_READ_DATA, 6, 0, st->data, 6); + memcpy(mac, st->data, sizeof(mac)); + + if (ret > 0) + deb_info("%s: mac is %02x:%02x:%02x:%02x:%02x:%02x\n", + __func__, mac[0], mac[1], mac[2], + mac[3], mac[4], mac[5]); + + return ret; +} + +static int az6007_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct az6007_device_state *st = adap->dev->priv; + + deb_info("attaching demod drxk"); + + adap->fe_adap[0].fe = dvb_attach(drxk_attach, &terratec_h7_drxk, + &adap->dev->i2c_adap); + if (!adap->fe_adap[0].fe) + return -EINVAL; + + adap->fe_adap[0].fe->sec_priv = adap; + st->gate_ctrl = adap->fe_adap[0].fe->ops.i2c_gate_ctrl; + adap->fe_adap[0].fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; + + az6007_ci_init(adap); + + return 0; +} + +static int az6007_tuner_attach(struct dvb_usb_adapter *adap) +{ + deb_info("attaching tuner mt2063"); + + /* Attach mt2063 to DVB-C frontend */ + if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) + adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1); + if (!dvb_attach(mt2063_attach, adap->fe_adap[0].fe, + &az6007_mt2063_config, + &adap->dev->i2c_adap)) + return -EINVAL; + + if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) + adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0); + + return 0; +} + +int az6007_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + struct az6007_device_state *st = d->priv; + int ret; + + deb_info("%s()\n", __func__); + + if (!st->warm) { + mutex_init(&st->mutex); + + ret = az6007_write(d, AZ6007_POWER, 0, 2, NULL, 0); + if (ret < 0) + return ret; + msleep(60); + ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0); + if (ret < 0) + return ret; + msleep(100); + ret = az6007_write(d, AZ6007_POWER, 1, 3, NULL, 0); + if (ret < 0) + return ret; + msleep(20); + ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0); + if (ret < 0) + return ret; + + msleep(400); + ret = az6007_write(d, FX2_SCON1, 0, 3, NULL, 0); + if (ret < 0) + return ret; + msleep(150); + ret = az6007_write(d, FX2_SCON1, 1, 3, NULL, 0); + if (ret < 0) + return ret; + msleep(430); + ret = az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0); + if (ret < 0) + return ret; + + st->warm = true; + + return 0; + } + + if (!onoff) + return 0; + + az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0); + az6007_write(d, AZ6007_TS_THROUGH, 0, 0, NULL, 0); + + return 0; +} + +/* I2C */ +static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct az6007_device_state *st = d->priv; + int i, j, len; + int ret = 0; + u16 index; + u16 value; + int length; + u8 req, addr; + + if (mutex_lock_interruptible(&st->mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + addr = msgs[i].addr << 1; + if (((i + 1) < num) + && (msgs[i].len == 1) + && (!msgs[i].flags & I2C_M_RD) + && (msgs[i + 1].flags & I2C_M_RD) + && (msgs[i].addr == msgs[i + 1].addr)) { + /* + * A write + read xfer for the same address, where + * the first xfer has just 1 byte length. + * Need to join both into one operation + */ + if (dvb_usb_az6007_debug & 2) + printk(KERN_DEBUG + "az6007 I2C xfer write+read addr=0x%x len=%d/%d: ", + addr, msgs[i].len, msgs[i + 1].len); + req = AZ6007_I2C_RD; + index = msgs[i].buf[0]; + value = addr | (1 << 8); + length = 6 + msgs[i + 1].len; + len = msgs[i + 1].len; + ret = __az6007_read(d->udev, req, value, index, + st->data, length); + if (ret >= len) { + for (j = 0; j < len; j++) { + msgs[i + 1].buf[j] = st->data[j + 5]; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT + "0x%02x ", + msgs[i + 1].buf[j]); + } + } else + ret = -EIO; + i++; + } else if (!(msgs[i].flags & I2C_M_RD)) { + /* write bytes */ + if (dvb_usb_az6007_debug & 2) + printk(KERN_DEBUG + "az6007 I2C xfer write addr=0x%x len=%d: ", + addr, msgs[i].len); + req = AZ6007_I2C_WR; + index = msgs[i].buf[0]; + value = addr | (1 << 8); + length = msgs[i].len - 1; + len = msgs[i].len - 1; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT "(0x%02x) ", msgs[i].buf[0]); + for (j = 0; j < len; j++) { + st->data[j] = msgs[i].buf[j + 1]; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT "0x%02x ", + st->data[j]); + } + ret = __az6007_write(d->udev, req, value, index, + st->data, length); + } else { + /* read bytes */ + if (dvb_usb_az6007_debug & 2) + printk(KERN_DEBUG + "az6007 I2C xfer read addr=0x%x len=%d: ", + addr, msgs[i].len); + req = AZ6007_I2C_RD; + index = msgs[i].buf[0]; + value = addr; + length = msgs[i].len + 6; + len = msgs[i].len; + ret = __az6007_read(d->udev, req, value, index, + st->data, length); + for (j = 0; j < len; j++) { + msgs[i].buf[j] = st->data[j + 5]; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT + "0x%02x ", st->data[j + 5]); + } + } + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT "\n"); + if (ret < 0) + goto err; + } +err: + mutex_unlock(&st->mutex); + + if (ret < 0) { + info("%s ERROR: %i", __func__, ret); + return ret; + } + return num; +} + +static u32 az6007_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm az6007_i2c_algo = { + .master_xfer = az6007_i2c_xfer, + .functionality = az6007_i2c_func, +}; + +int az6007_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, int *cold) +{ + int ret; + u8 *mac; + + mac = kmalloc(6, GFP_ATOMIC); + if (!mac) + return -ENOMEM; + + /* Try to read the mac address */ + ret = __az6007_read(udev, AZ6007_READ_DATA, 6, 0, mac, 6); + if (ret == 6) + *cold = 0; + else + *cold = 1; + + kfree(mac); + + if (*cold) { + __az6007_write(udev, 0x09, 1, 0, NULL, 0); + __az6007_write(udev, 0x00, 0, 0, NULL, 0); + __az6007_write(udev, 0x00, 0, 0, NULL, 0); + } + + deb_info("Device is on %s state\n", *cold ? "warm" : "cold"); + return 0; +} + +static struct dvb_usb_device_properties az6007_properties; + +static void az6007_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + az6007_ci_uninit(d); + dvb_usb_device_exit(intf); +} + +static int az6007_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &az6007_properties, + THIS_MODULE, NULL, adapter_nr); +} + +static struct usb_device_id az6007_usb_table[] = { + {USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2)}, + {0}, +}; + +MODULE_DEVICE_TABLE(usb, az6007_usb_table); + +static struct dvb_usb_device_properties az6007_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-terratec-h7-az6007.fw", + .no_reconnect = 1, + .size_of_priv = sizeof(struct az6007_device_state), + .identify_state = az6007_identify_state, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = az6007_streaming_ctrl, + .tuner_attach = az6007_tuner_attach, + .frontend_attach = az6007_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } } + } }, + .power_ctrl = az6007_power_ctrl, + .read_mac_address = az6007_read_mac_addr, + + .rc.core = { + .rc_interval = 400, + .rc_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .module_name = "az6007", + .rc_query = az6007_rc_query, + .allowed_protos = RC_TYPE_NEC, + }, + .i2c_algo = &az6007_i2c_algo, + + .num_device_descs = 2, + .devices = { + { .name = "AzureWave DTV StarBox DVB-T/C USB2.0 (az6007)", + .cold_ids = { &az6007_usb_table[0], NULL }, + .warm_ids = { NULL }, + }, + { .name = "TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)", + .cold_ids = { &az6007_usb_table[1], &az6007_usb_table[2], NULL }, + .warm_ids = { NULL }, + }, + { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver az6007_usb_driver = { + .name = "dvb_usb_az6007", + .probe = az6007_usb_probe, + .disconnect = az6007_usb_disconnect, + .id_table = az6007_usb_table, +}; + +/* module stuff */ +static int __init az6007_usb_module_init(void) +{ + int result; + deb_info("az6007 usb module init\n"); + + result = usb_register(&az6007_usb_driver); + if (result) { + err("usb_register failed. (%d)", result); + return result; + } + + return 0; +} + +static void __exit az6007_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + deb_info("az6007 usb module exit\n"); + usb_deregister(&az6007_usb_driver); +} + +module_init(az6007_usb_module_init); +module_exit(az6007_usb_module_exit); + +MODULE_AUTHOR("Henry Wang <Henry.wang@AzureWave.com>"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_DESCRIPTION("Driver for AzureWave 6007 DVB-C/T USB2.0 and clones"); +MODULE_VERSION("1.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 070e82aa53f5..02290c60f72f 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -677,11 +677,9 @@ static void dib0700_rc_urb_completion(struct urb *purb) u8 toggle; deb_info("%s()\n", __func__); - if (d == NULL) - return; - if (d->rc_dev == NULL) { /* This will occur if disable_rc_polling=1 */ + kfree(purb->transfer_buffer); usb_free_urb(purb); return; } @@ -690,6 +688,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) if (purb->status < 0) { deb_info("discontinuing polling\n"); + kfree(purb->transfer_buffer); usb_free_urb(purb); return; } @@ -784,8 +783,11 @@ int dib0700_rc_setup(struct dvb_usb_device *d) dib0700_rc_urb_completion, d); ret = usb_submit_urb(purb, GFP_ATOMIC); - if (ret) + if (ret) { err("rc submit urb failed\n"); + kfree(purb->transfer_buffer); + usb_free_urb(purb); + } return ret; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index d390ddaa5a53..397d8f232731 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -51,6 +51,7 @@ #define USB_VID_PINNACLE 0x2304 #define USB_VID_PCTV 0x2013 #define USB_VID_PIXELVIEW 0x1554 +#define USB_VID_REALTEK 0x0bda #define USB_VID_TECHNOTREND 0x0b48 #define USB_VID_TERRATEC 0x0ccd #define USB_VID_TELESTAR 0x10b9 @@ -80,6 +81,7 @@ #define USB_PID_ANSONIC_DVBT_USB 0x6000 #define USB_PID_ANYSEE 0x861f #define USB_PID_AZUREWAVE_AD_TU700 0x3237 +#define USB_PID_AZUREWAVE_6007 0x0ccd #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 @@ -125,6 +127,8 @@ #define USB_PID_E3C_EC168_3 0xfffb #define USB_PID_E3C_EC168_4 0x1001 #define USB_PID_E3C_EC168_5 0x1002 +#define USB_PID_FREECOM_DVBT 0x0160 +#define USB_PID_FREECOM_DVBT_2 0x0161 #define USB_PID_UNIWILL_STK7700P 0x6003 #define USB_PID_GENIUS_TVGO_DVB_T03 0x4012 #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 @@ -226,6 +230,8 @@ #define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 #define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab +#define USB_PID_TERRATEC_H7 0x10b4 +#define USB_PID_TERRATEC_H7_2 0x10a3 #define USB_PID_TERRATEC_T3 0x10a0 #define USB_PID_TERRATEC_T5 0x10a1 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e @@ -249,6 +255,8 @@ #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 #define USB_PID_PCTV_452E 0x021f +#define USB_PID_REALTEK_RTL2831U 0x2831 +#define USB_PID_REALTEK_RTL2832U 0x2832 #define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007 #define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI 0x300a #define USB_PID_NEBULA_DIGITV 0x0201 diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c index 9f01cd7a6e3f..3b7b102f20ae 100644 --- a/drivers/media/dvb/dvb-usb/it913x.c +++ b/drivers/media/dvb/dvb-usb/it913x.c @@ -64,6 +64,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct it913x_state { u8 id; struct ite_config it913x_config; + u8 pid_filter_onoff; }; struct ite_config it913x_config; @@ -259,15 +260,16 @@ static u32 it913x_query(struct usb_device *udev, u8 pro) static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) { + struct it913x_state *st = adap->dev->priv; struct usb_device *udev = adap->dev->udev; int ret; u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); + deb_info(1, "PID_C (%02x)", onoff); - ret = it913x_wr_reg(udev, pro, PID_EN, onoff); + ret = it913x_wr_reg(udev, pro, PID_EN, st->pid_filter_onoff); mutex_unlock(&adap->dev->i2c_mutex); return ret; @@ -276,12 +278,13 @@ static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) static int it913x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { + struct it913x_state *st = adap->dev->priv; struct usb_device *udev = adap->dev->udev; int ret; u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); + deb_info(1, "PID_F (%02x)", onoff); ret = it913x_wr_reg(udev, pro, PID_LSB, (u8)(pid & 0xff)); @@ -292,6 +295,13 @@ static int it913x_pid_filter(struct dvb_usb_adapter *adap, ret |= it913x_wr_reg(udev, pro, PID_INX, (u8)(index & 0x1f)); + if (udev->speed == USB_SPEED_HIGH && pid == 0x2000) { + ret |= it913x_wr_reg(udev, pro, PID_EN, !onoff); + st->pid_filter_onoff = !onoff; + } else + st->pid_filter_onoff = + adap->fe_adap[adap->active_fe].pid_filtering; + mutex_unlock(&adap->dev->i2c_mutex); return 0; } @@ -316,8 +326,8 @@ static int it913x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int ret; u32 reg; u8 pro; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; + + mutex_lock(&d->i2c_mutex); debug_data_snipet(1, "Message out", msg[0].buf); deb_info(2, "num of messages %d address %02x", num, msg[0].addr); @@ -358,8 +368,7 @@ static int it913x_rc_query(struct dvb_usb_device *d) int ret; u32 key; /* Avoid conflict with frontends*/ - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&d->i2c_mutex); ret = it913x_io(d->udev, READ_LONG, PRO_LINK, CMD_IR_GET, 0, 0, &ibuf[0], sizeof(ibuf)); @@ -388,19 +397,12 @@ static int ite_firmware_select(struct usb_device *udev, { int sw; /* auto switch */ - if (le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_ITETECH_IT9135) - sw = IT9135_V1_FW; - else if (le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_ITETECH_IT9135_9005) + if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_KWORLD_2) + sw = IT9137_FW; + else if (it913x_config.chip_ver == 1) sw = IT9135_V1_FW; - else if (le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_ITETECH_IT9135_9006) { + else sw = IT9135_V2_FW; - if (it913x_config.tuner_id_0 == 0) - it913x_config.tuner_id_0 = IT9135_60; - } else - sw = IT9137_FW; /* force switch */ if (dvb_usb_it913x_firmware != IT9135_AUTO) @@ -410,41 +412,103 @@ static int ite_firmware_select(struct usb_device *udev, case IT9135_V1_FW: it913x_config.firmware_ver = 1; it913x_config.adc_x2 = 1; + it913x_config.read_slevel = false; props->firmware = fw_it9135_v1; break; case IT9135_V2_FW: it913x_config.firmware_ver = 1; it913x_config.adc_x2 = 1; + it913x_config.read_slevel = false; props->firmware = fw_it9135_v2; + switch (it913x_config.tuner_id_0) { + case IT9135_61: + case IT9135_62: + break; + default: + info("Unknown tuner ID applying default 0x60"); + case IT9135_60: + it913x_config.tuner_id_0 = IT9135_60; + } break; case IT9137_FW: default: it913x_config.firmware_ver = 0; it913x_config.adc_x2 = 0; + it913x_config.read_slevel = true; props->firmware = fw_it9137; } return 0; } +static void it913x_select_remote(struct usb_device *udev, + struct dvb_usb_device_properties *props) +{ + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case USB_PID_ITETECH_IT9135_9005: + props->rc.core.rc_codes = RC_MAP_IT913X_V2; + return; + default: + props->rc.core.rc_codes = RC_MAP_IT913X_V1; + } + return; +} + #define TS_MPEG_PKT_SIZE 188 #define EP_LOW 21 #define TS_BUFFER_SIZE_PID (EP_LOW*TS_MPEG_PKT_SIZE) #define EP_HIGH 348 #define TS_BUFFER_SIZE_MAX (EP_HIGH*TS_MPEG_PKT_SIZE) -static int it913x_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) +static int it913x_select_config(struct usb_device *udev, + struct dvb_usb_device_properties *props) { - int ret = 0, firm_no; - u8 reg, remote; + int ret = 0, reg; + bool proprietary_ir = false; - firm_no = it913x_return_status(udev); + if (it913x_config.chip_ver == 0x02 + && it913x_config.chip_type == 0x9135) + reg = it913x_read_reg(udev, 0x461d); + else + reg = it913x_read_reg(udev, 0x461b); - /* checnk for dual mode */ - it913x_config.dual_mode = it913x_read_reg(udev, 0x49c5); + if (reg < 0) + return reg; + + if (reg == 0) { + it913x_config.dual_mode = 0; + it913x_config.tuner_id_0 = IT9135_38; + proprietary_ir = true; + } else { + /* TS mode */ + reg = it913x_read_reg(udev, 0x49c5); + if (reg < 0) + return reg; + it913x_config.dual_mode = reg; + + /* IR mode type */ + reg = it913x_read_reg(udev, 0x49ac); + if (reg < 0) + return reg; + if (reg == 5) { + info("Remote propriety (raw) mode"); + proprietary_ir = true; + } else if (reg == 1) { + info("Remote HID mode NOT SUPPORTED"); + proprietary_ir = false; + props->rc.core.rc_codes = NULL; + } else + props->rc.core.rc_codes = NULL; + + /* Tuner_id */ + reg = it913x_read_reg(udev, 0x49d0); + if (reg < 0) + return reg; + it913x_config.tuner_id_0 = reg; + } + + if (proprietary_ir) + it913x_select_remote(udev, props); if (udev->speed != USB_SPEED_HIGH) { props->adapter[0].fe[0].pid_filter_count = 5; @@ -459,17 +523,6 @@ static int it913x_identify_state(struct usb_device *udev, if(props->adapter[0].fe[0].pid_filter_count == 5) props->adapter[0].fe[0].pid_filter_count = 31; - /* TODO different remotes */ - remote = it913x_read_reg(udev, 0x49ac); /* Remote */ - if (remote == 0) - props->rc.core.rc_codes = NULL; - - /* TODO at the moment tuner_id is always assigned to 0x38 */ - it913x_config.tuner_id_0 = it913x_read_reg(udev, 0x49d0); - - info("Dual mode=%x Remote=%x Tuner Type=%x", it913x_config.dual_mode - , remote, it913x_config.tuner_id_0); - /* Select Stream Buffer Size and pid filter option*/ if (pid_filter) { props->adapter[0].fe[0].stream.u.bulk.buffersize = @@ -490,8 +543,29 @@ static int it913x_identify_state(struct usb_device *udev, } else props->num_adapters = 1; + info("Dual mode=%x Tuner Type=%x", it913x_config.dual_mode, + it913x_config.tuner_id_0); + ret = ite_firmware_select(udev, props); + return ret; +} + +static int it913x_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int ret = 0, firm_no; + u8 reg; + + firm_no = it913x_return_status(udev); + + /* Read and select config */ + ret = it913x_select_config(udev, props); + if (ret < 0) + return ret; + if (firm_no > 0) { *cold = 0; return 0; @@ -538,18 +612,22 @@ static int it913x_identify_state(struct usb_device *udev, static int it913x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { + struct it913x_state *st = adap->dev->priv; int ret = 0; u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; deb_info(1, "STM (%02x)", onoff); - if (!onoff) + if (!onoff) { + mutex_lock(&adap->dev->i2c_mutex); + ret = it913x_wr_reg(adap->dev->udev, pro, PID_RST, 0x1); + mutex_unlock(&adap->dev->i2c_mutex); + st->pid_filter_onoff = + adap->fe_adap[adap->active_fe].pid_filtering; - mutex_unlock(&adap->dev->i2c_mutex); + } return ret; } @@ -789,7 +867,7 @@ static struct dvb_usb_device_properties it913x_properties = { .rc_query = it913x_rc_query, .rc_interval = IT913X_POLL, .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_MSI_DIGIVOX_III, + .rc_codes = RC_MAP_IT913X_V1, }, .i2c_algo = &it913x_i2c_algo, .num_device_descs = 5, @@ -823,5 +901,5 @@ module_usb_driver(it913x_driver); MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); MODULE_DESCRIPTION("it913x USB 2 Driver"); -MODULE_VERSION("1.22"); +MODULE_VERSION("1.27"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c index 291f6b110399..5dde06d066ff 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.c +++ b/drivers/media/dvb/dvb-usb/lmedm04.c @@ -77,6 +77,7 @@ #include "stv0299.h" #include "dvb-pll.h" #include "z0194a.h" +#include "m88rs2000.h" @@ -104,7 +105,7 @@ MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG"); static int pid_filter; module_param_named(pid, pid_filter, int, 0644); -MODULE_PARM_DESC(pid, "set default 0=on 1=off"); +MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -113,6 +114,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define TUNER_LG 0x1 #define TUNER_S7395 0x2 #define TUNER_S0194 0x3 +#define TUNER_RS2000 0x4 struct lme2510_state { u8 id; @@ -121,6 +123,8 @@ struct lme2510_state { u8 signal_level; u8 signal_sn; u8 time_key; + u8 last_key; + u8 key_timeout; u8 i2c_talk_onoff; u8 i2c_gate; u8 i2c_tuner_gate_w; @@ -128,6 +132,7 @@ struct lme2510_state { u8 i2c_tuner_addr; u8 stream_on; u8 pid_size; + u8 pid_off; void *buffer; struct urb *lme_urb; void *usb_buffer; @@ -178,14 +183,8 @@ static int lme2510_usb_talk(struct dvb_usb_device *d, /* the read/write capped at 64 */ memcpy(buff, wbuf, (wlen < 64) ? wlen : 64); - ret |= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01)); - ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01); - msleep(10); - - ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01)); - ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ? rlen : 64 , 0x01); @@ -199,9 +198,14 @@ static int lme2510_usb_talk(struct dvb_usb_device *d, static int lme2510_stream_restart(struct dvb_usb_device *d) { - static u8 stream_on[] = LME_ST_ON_W; + struct lme2510_state *st = d->priv; + u8 all_pids[] = LME_ALL_PIDS; + u8 stream_on[] = LME_ST_ON_W; int ret; - u8 rbuff[10]; + u8 rbuff[1]; + if (st->pid_off) + ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids), + rbuff, sizeof(rbuff)); /*Restart Stream Command*/ ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on), rbuff, sizeof(rbuff)); @@ -308,6 +312,14 @@ static void lme2510_int_response(struct urb *lme_urb) ((ibuf[2] & 0x01) << 0x03); } break; + case TUNER_RS2000: + if (ibuf[2] > 0) + st->signal_lock = 0xff; + else + st->signal_lock = 0xf0; + st->signal_level = ibuf[4]; + st->signal_sn = ibuf[5]; + st->time_key = ibuf[7]; default: break; } @@ -359,19 +371,20 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap) static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) { struct lme2510_state *st = adap->dev->priv; - static u8 clear_pid_reg[] = LME_CLEAR_PID; + static u8 clear_pid_reg[] = LME_ALL_PIDS; static u8 rbuf[1]; int ret; deb_info(1, "PID Clearing Filter"); - ret = mutex_lock_interruptible(&adap->dev->i2c_mutex); - if (ret < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); - if (!onoff) + if (!onoff) { ret |= lme2510_usb_talk(adap->dev, clear_pid_reg, sizeof(clear_pid_reg), rbuf, sizeof(rbuf)); + st->pid_off = true; + } else + st->pid_off = false; st->pid_size = 0; @@ -389,11 +402,9 @@ static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, pid, index, onoff); if (onoff) { - ret = mutex_lock_interruptible(&adap->dev->i2c_mutex); - if (ret < 0) - return -EAGAIN; - ret |= lme2510_enable_pid(adap->dev, index, pid); - mutex_unlock(&adap->dev->i2c_mutex); + mutex_lock(&adap->dev->i2c_mutex); + ret |= lme2510_enable_pid(adap->dev, index, pid); + mutex_unlock(&adap->dev->i2c_mutex); } @@ -425,9 +436,6 @@ static int lme2510_msg(struct dvb_usb_device *d, int ret = 0; struct lme2510_state *st = d->priv; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - if (st->i2c_talk_onoff == 1) { ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); @@ -456,8 +464,6 @@ static int lme2510_msg(struct dvb_usb_device *d, st->i2c_talk_onoff = 0; } } - if ((wbuf[3] != 0x6) & (wbuf[3] != 0x5)) - msleep(5); } break; case TUNER_S0194: @@ -472,10 +478,12 @@ static int lme2510_msg(struct dvb_usb_device *d, } } break; + case TUNER_RS2000: default: break; } } else { + /* TODO rewrite this section */ switch (st->tuner_config) { case TUNER_LG: switch (wbuf[3]) { @@ -559,6 +567,24 @@ static int lme2510_msg(struct dvb_usb_device *d, break; } break; + case TUNER_RS2000: + switch (wbuf[3]) { + case 0x8c: + rbuf[0] = 0x55; + rbuf[1] = 0xff; + if (st->last_key == st->time_key) { + st->key_timeout++; + if (st->key_timeout > 5) + rbuf[1] = 0; + } else + st->key_timeout = 0; + st->last_key = st->time_key; + break; + default: + lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); + st->i2c_talk_onoff = 1; + break; + } default: break; } @@ -568,8 +594,6 @@ static int lme2510_msg(struct dvb_usb_device *d, } - mutex_unlock(&d->i2c_mutex); - return ret; } @@ -584,6 +608,8 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], u16 len; u8 gate = st->i2c_gate; + mutex_lock(&d->i2c_mutex); + if (gate == 0) gate = 5; @@ -622,6 +648,7 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) { deb_info(1, "i2c transfer failed."); + mutex_unlock(&d->i2c_mutex); return -EAGAIN; } @@ -634,6 +661,8 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], } } } + + mutex_unlock(&d->i2c_mutex); return i; } @@ -653,7 +682,7 @@ static int lme2510_identify_state(struct usb_device *udev, struct dvb_usb_device_description **desc, int *cold) { - if (pid_filter > 0) + if (pid_filter != 2) props->adapter[0].fe[0].caps &= ~DVB_USB_ADAP_NEED_PID_FILTERING; *cold = 0; @@ -663,7 +692,7 @@ static int lme2510_identify_state(struct usb_device *udev, static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { struct lme2510_state *st = adap->dev->priv; - static u8 clear_reg_3[] = LME_CLEAR_PID; + static u8 clear_reg_3[] = LME_ALL_PIDS; static u8 rbuf[1]; int ret = 0, rlen = sizeof(rbuf); @@ -675,8 +704,7 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) else { deb_info(1, "STM Steam Off"); /* mutex is here only to avoid collision with I2C */ - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); ret = lme2510_usb_talk(adap->dev, clear_reg_3, sizeof(clear_reg_3), rbuf, rlen); @@ -781,16 +809,18 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) const char fw_c_s7395[] = "dvb-usb-lme2510c-s7395.fw"; const char fw_c_lg[] = "dvb-usb-lme2510c-lg.fw"; const char fw_c_s0194[] = "dvb-usb-lme2510c-s0194.fw"; + const char fw_c_rs2000[] = "dvb-usb-lme2510c-rs2000.fw"; const char fw_lg[] = "dvb-usb-lme2510-lg.fw"; const char fw_s0194[] = "dvb-usb-lme2510-s0194.fw"; const char *fw_lme; - int ret, cold_fw; + int ret = 0, cold_fw; cold = (cold > 0) ? (cold & 1) : 0; cold_fw = !cold; - if (le16_to_cpu(udev->descriptor.idProduct) == 0x1122) { + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case 0x1122: switch (dvb_usb_lme2510_firmware) { default: dvb_usb_lme2510_firmware = TUNER_S0194; @@ -813,7 +843,8 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) cold_fw = 0; break; } - } else { + break; + case 0x1120: switch (dvb_usb_lme2510_firmware) { default: dvb_usb_lme2510_firmware = TUNER_S7395; @@ -842,8 +873,17 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) cold_fw = 0; break; } + break; + case 0x22f0: + fw_lme = fw_c_rs2000; + ret = request_firmware(&fw, fw_lme, &udev->dev); + dvb_usb_lme2510_firmware = TUNER_RS2000; + break; + default: + fw_lme = fw_c_s7395; } + if (cold_fw) { info("FRM Loading %s file", fw_lme); ret = lme2510_download_firmware(udev, fw); @@ -906,6 +946,29 @@ static struct stv0299_config sharp_z0194_config = { .set_symbol_rate = sharp_z0194a_set_symbol_rate, }; +static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe, + int caller) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *d = adap->dev; + struct lme2510_state *st = d->priv; + + mutex_lock(&d->i2c_mutex); + if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) { + st->i2c_talk_onoff = 0; + lme2510_stream_restart(d); + } + mutex_unlock(&d->i2c_mutex); + + return 0; +} + +static struct m88rs2000_config m88rs2000_config = { + .demod_addr = 0xd0, + .tuner_addr = 0xc0, + .set_ts_params = dm04_rs2000_set_ts_param, +}; + static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { @@ -915,8 +978,7 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, static u8 rbuf[1]; int ret = 0, len = 3, rlen = 1; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); switch (voltage) { case SEC_VOLTAGE_18: @@ -937,12 +999,31 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, return (ret < 0) ? -ENODEV : 0; } +static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct lme2510_state *st = adap->dev->priv; + + *strength = (u16)((u32)st->signal_level * 0xffff / 0x7f); + return 0; +} + +static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct lme2510_state *st = adap->dev->priv; + + *snr = (u16)((u32)st->signal_sn * 0xffff / 0xff); + return 0; +} + static int lme_name(struct dvb_usb_adapter *adap) { struct lme2510_state *st = adap->dev->priv; const char *desc = adap->dev->desc->name; char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395", - " SHARP:BS2F7HZ0194"}; + " SHARP:BS2F7HZ0194", " RS2000"}; char *name = adap->fe_adap[0].fe->ops.info.name; strlcpy(name, desc, 128); @@ -958,60 +1039,82 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) int ret = 0; st->i2c_talk_onoff = 1; + switch (le16_to_cpu(adap->dev->udev->descriptor.idProduct)) { + case 0x1122: + case 0x1120: + st->i2c_gate = 4; + adap->fe_adap[0].fe = dvb_attach(tda10086_attach, + &tda10086_config, &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe) { + info("TUN Found Frontend TDA10086"); + st->i2c_tuner_gate_w = 4; + st->i2c_tuner_gate_r = 4; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_LG; + if (dvb_usb_lme2510_firmware != TUNER_LG) { + dvb_usb_lme2510_firmware = TUNER_LG; + ret = lme_firmware_switch(adap->dev->udev, 1); + } + break; + } - st->i2c_gate = 4; - adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, - &adap->dev->i2c_adap); - - if (adap->fe_adap[0].fe) { - info("TUN Found Frontend TDA10086"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 4; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_LG; - if (dvb_usb_lme2510_firmware != TUNER_LG) { - dvb_usb_lme2510_firmware = TUNER_LG; - ret = lme_firmware_switch(adap->dev->udev, 1); + st->i2c_gate = 4; + adap->fe_adap[0].fe = dvb_attach(stv0299_attach, + &sharp_z0194_config, &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe) { + info("FE Found Stv0299"); + st->i2c_tuner_gate_w = 4; + st->i2c_tuner_gate_r = 5; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_S0194; + if (dvb_usb_lme2510_firmware != TUNER_S0194) { + dvb_usb_lme2510_firmware = TUNER_S0194; + ret = lme_firmware_switch(adap->dev->udev, 1); + } + break; } - goto end; - } - st->i2c_gate = 4; - adap->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194_config, + st->i2c_gate = 5; + adap->fe_adap[0].fe = dvb_attach(stv0288_attach, &lme_config, &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe) { - info("FE Found Stv0299"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 5; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_S0194; - if (dvb_usb_lme2510_firmware != TUNER_S0194) { - dvb_usb_lme2510_firmware = TUNER_S0194; - ret = lme_firmware_switch(adap->dev->udev, 1); + + if (adap->fe_adap[0].fe) { + info("FE Found Stv0288"); + st->i2c_tuner_gate_w = 4; + st->i2c_tuner_gate_r = 5; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_S7395; + if (dvb_usb_lme2510_firmware != TUNER_S7395) { + dvb_usb_lme2510_firmware = TUNER_S7395; + ret = lme_firmware_switch(adap->dev->udev, 1); + } + break; } - goto end; - } + case 0x22f0: + st->i2c_gate = 5; + adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach, + &m88rs2000_config, &adap->dev->i2c_adap); - st->i2c_gate = 5; - adap->fe_adap[0].fe = dvb_attach(stv0288_attach, &lme_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe) { - info("FE Found Stv0288"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 5; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_S7395; - if (dvb_usb_lme2510_firmware != TUNER_S7395) { - dvb_usb_lme2510_firmware = TUNER_S7395; - ret = lme_firmware_switch(adap->dev->udev, 1); + if (adap->fe_adap[0].fe) { + info("FE Found M88RS2000"); + st->i2c_tuner_gate_w = 5; + st->i2c_tuner_gate_r = 5; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_RS2000; + adap->fe_adap[0].fe->ops.read_signal_strength = + dm04_rs2000_read_signal_strength; + adap->fe_adap[0].fe->ops.read_snr = + dm04_rs2000_read_snr; } - } else { - info("DM04 Not Supported"); - return -ENODEV; + break; } + if (adap->fe_adap[0].fe == NULL) { + info("DM04/QQBOX Not Powered up or not Supported"); + return -ENODEV; + } -end: if (ret) { + if (ret) { if (adap->fe_adap[0].fe) { dvb_frontend_detach(adap->fe_adap[0].fe); adap->fe_adap[0].fe = NULL; @@ -1028,7 +1131,7 @@ end: if (ret) { static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) { struct lme2510_state *st = adap->dev->priv; - char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA"}; + char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"}; int ret = 0; switch (st->tuner_config) { @@ -1047,6 +1150,9 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) &adap->dev->i2c_adap, DVB_PLL_OPERA1)) ret = st->tuner_config; break; + case TUNER_RS2000: + ret = st->tuner_config; + break; default: break; } @@ -1075,10 +1181,9 @@ static int lme2510_powerup(struct dvb_usb_device *d, int onoff) static u8 lnb_on[] = LNB_ON; static u8 lnb_off[] = LNB_OFF; static u8 rbuf[1]; - int ret, len = 3, rlen = 1; + int ret = 0, len = 3, rlen = 1; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&d->i2c_mutex); if (onoff) ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen); @@ -1136,6 +1241,7 @@ static int lme2510_probe(struct usb_interface *intf, static struct usb_device_id lme2510_table[] = { { USB_DEVICE(0x3344, 0x1122) }, /* LME2510 */ { USB_DEVICE(0x3344, 0x1120) }, /* LME2510C */ + { USB_DEVICE(0x3344, 0x22f0) }, /* LME2510C RS2000 */ {} /* Terminating entry */ }; @@ -1153,7 +1259,7 @@ static struct dvb_usb_device_properties lme2510_properties = { DVB_USB_ADAP_NEED_PID_FILTERING| DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .streaming_ctrl = lme2510_streaming_ctrl, - .pid_filter_count = 15, + .pid_filter_count = 32, .pid_filter = lme2510_pid_filter, .pid_filter_ctrl = lme2510_pid_filter_ctrl, .frontend_attach = dm04_lme2510_frontend_attach, @@ -1204,7 +1310,7 @@ static struct dvb_usb_device_properties lme2510c_properties = { DVB_USB_ADAP_NEED_PID_FILTERING| DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .streaming_ctrl = lme2510_streaming_ctrl, - .pid_filter_count = 15, + .pid_filter_count = 32, .pid_filter = lme2510_pid_filter, .pid_filter_ctrl = lme2510_pid_filter_ctrl, .frontend_attach = dm04_lme2510_frontend_attach, @@ -1234,11 +1340,14 @@ static struct dvb_usb_device_properties lme2510c_properties = { .identify_state = lme2510_identify_state, .i2c_algo = &lme2510_i2c_algo, .generic_bulk_ctrl_endpoint = 0, - .num_device_descs = 1, + .num_device_descs = 2, .devices = { { "DM04_LME2510C_DVB-S", { &lme2510_table[1], NULL }, }, + { "DM04_LME2510C_DVB-S RS2000", + { &lme2510_table[2], NULL }, + }, } }; @@ -1295,5 +1404,5 @@ module_usb_driver(lme2510_driver); MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0"); -MODULE_VERSION("1.91"); +MODULE_VERSION("1.99"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/lmedm04.h b/drivers/media/dvb/dvb-usb/lmedm04.h index ab21e2ef53fa..e9c207205c2f 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.h +++ b/drivers/media/dvb/dvb-usb/lmedm04.h @@ -41,6 +41,7 @@ #define LME_ST_ON_W {0x06, 0x00} #define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0} #define LME_ZERO_PID {0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c} +#define LME_ALL_PIDS {0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81} /* LNB Voltage * 07 XX XX diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c index 38ef0253d3b5..81305de2fea5 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf.c @@ -351,15 +351,13 @@ static int mxl111sf_ep6_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) adap_state->ep6_clockphase, 0, 0); mxl_fail(ret); +#if 0 } else { ret = mxl111sf_disable_656_port(state); mxl_fail(ret); +#endif } - mxl111sf_read_reg(state, 0x12, &tmp); - tmp &= ~0x04; - mxl111sf_write_reg(state, 0x12, tmp); - return ret; } diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c new file mode 100644 index 000000000000..8f4736a10fc8 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c @@ -0,0 +1,982 @@ +/* + * Realtek RTL28xxU DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "rtl28xxu.h" + +#include "rtl2830.h" + +#include "qt1010.h" +#include "mt2060.h" +#include "mxl5005s.h" + +/* debug */ +static int dvb_usb_rtl28xxu_debug; +module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) +{ + int ret; + unsigned int pipe; + u8 requesttype; + u8 *buf; + + buf = kmalloc(req->size, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto err; + } + + if (req->index & CMD_WR_FLAG) { + /* write */ + memcpy(buf, req->data, req->size); + requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); + pipe = usb_sndctrlpipe(d->udev, 0); + } else { + /* read */ + requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value, + req->index, buf, req->size, 1000); + if (ret > 0) + ret = 0; + + deb_dump(0, requesttype, req->value, req->index, buf, req->size, + deb_xfer); + + /* read request, copy returned data to return buf */ + if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) + memcpy(req->data, buf, req->size); + + kfree(buf); + + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2831_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +{ + struct rtl28xxu_req req; + + if (reg < 0x3000) + req.index = CMD_USB_WR; + else if (reg < 0x4000) + req.index = CMD_SYS_WR; + else + req.index = CMD_IR_WR; + + req.value = reg; + req.size = len; + req.data = val; + + return rtl28xxu_ctrl_msg(d, &req); +} + +static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +{ + struct rtl28xxu_req req; + + if (reg < 0x3000) + req.index = CMD_USB_RD; + else if (reg < 0x4000) + req.index = CMD_SYS_RD; + else + req.index = CMD_IR_RD; + + req.value = reg; + req.size = len; + req.data = val; + + return rtl28xxu_ctrl_msg(d, &req); +} + +static int rtl2831_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + return rtl2831_wr_regs(d, reg, &val, 1); +} + +static int rtl2831_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + return rtl2831_rd_regs(d, reg, val, 1); +} + +/* I2C */ +static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + int ret; + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct rtl28xxu_priv *priv = d->priv; + struct rtl28xxu_req req; + + /* + * It is not known which are real I2C bus xfer limits, but testing + * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes. + * TODO: find out RTL2832U lens + */ + + /* + * I2C adapter logic looks rather complicated due to fact it handles + * three different access methods. Those methods are; + * 1) integrated demod access + * 2) old I2C access + * 3) new I2C access + * + * Used method is selected in order 1, 2, 3. Method 3 can handle all + * requests but there is two reasons why not use it always; + * 1) It is most expensive, usually two USB messages are needed + * 2) At least RTL2831U does not support it + * + * Method 3 is needed in case of I2C write+read (typical register read) + * where write is more than one byte. + */ + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num == 2 && !(msg[0].flags & I2C_M_RD) && + (msg[1].flags & I2C_M_RD)) { + if (msg[0].len > 24 || msg[1].len > 24) { + /* TODO: check msg[0].len max */ + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } else if (msg[0].addr == 0x10) { + /* method 1 - integrated demod */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_DEMOD_RD | priv->page; + req.size = msg[1].len; + req.data = &msg[1].buf[0]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else if (msg[0].len < 2) { + /* method 2 - old I2C */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_I2C_RD; + req.size = msg[1].len; + req.data = &msg[1].buf[0]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* method 3 - new I2C */ + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_WR; + req.size = msg[0].len; + req.data = msg[0].buf; + ret = rtl28xxu_ctrl_msg(d, &req); + if (ret) + goto err_mutex_unlock; + + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_RD; + req.size = msg[1].len; + req.data = msg[1].buf; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { + if (msg[0].len > 22) { + /* TODO: check msg[0].len max */ + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } else if (msg[0].addr == 0x10) { + /* method 1 - integrated demod */ + if (msg[0].buf[0] == 0x00) { + /* save demod page for later demod access */ + priv->page = msg[0].buf[1]; + ret = 0; + } else { + req.value = (msg[0].buf[0] << 8) | + (msg[0].addr << 1); + req.index = CMD_DEMOD_WR | priv->page; + req.size = msg[0].len-1; + req.data = &msg[0].buf[1]; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else if (msg[0].len < 23) { + /* method 2 - old I2C */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_I2C_WR; + req.size = msg[0].len-1; + req.data = &msg[0].buf[1]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* method 3 - new I2C */ + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_WR; + req.size = msg[0].len; + req.data = msg[0].buf; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else { + ret = -EINVAL; + } + +err_mutex_unlock: + mutex_unlock(&d->i2c_mutex); + + return ret ? ret : num; +} + +static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm rtl28xxu_i2c_algo = { + .master_xfer = rtl28xxu_i2c_xfer, + .functionality = rtl28xxu_i2c_func, +}; + +static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .if_dvbt = 36150000, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, + +}; + +static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .if_dvbt = 36125000, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, +}; + +static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 0, + .if_dvbt = 4570000, + .vtop = 0x3f, + .krf = 0x04, + .agc_targ_val = 0x3e, +}; + +static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + u8 buf[1]; + struct rtl2830_config *rtl2830_config; + /* open RTL2831U/RTL2830 I2C gate */ + struct rtl28xxu_req req_gate = { 0x0120, 0x0011, 0x0001, "\x08" }; + /* for MT2060 tuner probe */ + struct rtl28xxu_req req_mt2060 = { 0x00c0, CMD_I2C_RD, 1, buf }; + /* for QT1010 tuner probe */ + struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf }; + + deb_info("%s:\n", __func__); + + /* + * RTL2831U GPIOs + * ========================================================= + * GPIO0 | tuner#0 | 0 off | 1 on | MXL5005S (?) + * GPIO2 | LED | 0 off | 1 on | + * GPIO4 | tuner#1 | 0 on | 1 off | MT2060 + */ + + /* GPIO direction */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + if (ret) + goto err; + + /* enable as output GPIO0, GPIO2, GPIO4 */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + if (ret) + goto err; + + /* + * Probe used tuner. We need to know used tuner before demod attach + * since there is some demod params needed to set according to tuner. + */ + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + if (ret) + goto err; + + /* check QT1010 ID(?) register; reg=0f val=2c */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010); + if (ret == 0 && buf[0] == 0x2c) { + priv->tuner = TUNER_RTL2830_QT1010; + rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; + deb_info("%s: QT1010\n", __func__); + goto found; + } else { + deb_info("%s: QT1010 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + if (ret) + goto err; + + /* check MT2060 ID register; reg=00 val=63 */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060); + if (ret == 0 && buf[0] == 0x63) { + priv->tuner = TUNER_RTL2830_MT2060; + rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; + deb_info("%s: MT2060\n", __func__); + goto found; + } else { + deb_info("%s: MT2060 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* assume MXL5005S */ + ret = 0; + priv->tuner = TUNER_RTL2830_MXL5005S; + rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; + deb_info("%s: MXL5005S\n", __func__); + goto found; + +found: + /* attach demodulator */ + adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config, + &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe == NULL) { + ret = -ENODEV; + goto err; + } + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + u8 buf[1]; + /* open RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; + /* close RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"}; + /* for FC2580 tuner probe */ + struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf}; + + deb_info("%s:\n", __func__); + + /* GPIO direction */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + if (ret) + goto err; + + /* enable as output GPIO0, GPIO2, GPIO4 */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + if (ret) + goto err; + + ret = rtl2831_wr_reg(adap->dev, SYS_DEMOD_CTL, 0xe8); + if (ret) + goto err; + + /* + * Probe used tuner. We need to know used tuner before demod attach + * since there is some demod params needed to set according to tuner. + */ + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open); + if (ret) + goto err; + + /* check FC2580 ID register; reg=01 val=56 */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580); + if (ret == 0 && buf[0] == 0x56) { + priv->tuner = TUNER_RTL2832_FC2580; + deb_info("%s: FC2580\n", __func__); + goto found; + } else { + deb_info("%s: FC2580 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* close demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + if (ret) + goto err; + + /* tuner not found */ + ret = -ENODEV; + goto err; + +found: + /* close demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + if (ret) + goto err; + + /* attach demodulator */ + /* TODO: */ + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct qt1010_config rtl28xxu_qt1010_config = { + .i2c_address = 0x62, /* 0xc4 */ +}; + +static struct mt2060_config rtl28xxu_mt2060_config = { + .i2c_address = 0x60, /* 0xc0 */ + .clock_out = 0, +}; + +static struct mxl5005s_config rtl28xxu_mxl5005s_config = { + .i2c_address = 0x63, /* 0xc6 */ + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C_H, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + struct i2c_adapter *rtl2830_tuner_i2c; + struct dvb_frontend *fe; + + deb_info("%s:\n", __func__); + + /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ + rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe); + + switch (priv->tuner) { + case TUNER_RTL2830_QT1010: + fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe, + rtl2830_tuner_i2c, &rtl28xxu_qt1010_config); + break; + case TUNER_RTL2830_MT2060: + fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe, + rtl2830_tuner_i2c, &rtl28xxu_mt2060_config, + 1220); + break; + case TUNER_RTL2830_MXL5005S: + fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config); + break; + default: + fe = NULL; + err("unknown tuner=%d", priv->tuner); + } + + if (fe == NULL) { + ret = -ENODEV; + goto err; + } + + return 0; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_frontend *fe; + + deb_info("%s:\n", __func__); + + switch (priv->tuner) { + case TUNER_RTL2832_FC2580: + /* TODO: */ + fe = NULL; + break; + default: + fe = NULL; + err("unknown tuner=%d", priv->tuner); + } + + if (fe == NULL) { + ret = -ENODEV; + goto err; + } + + return 0; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl28xxu_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) +{ + int ret; + u8 buf[2], gpio; + + deb_info("%s: onoff=%d\n", __func__, onoff); + + ret = rtl2831_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio); + if (ret) + goto err; + + if (onoff) { + buf[0] = 0x00; + buf[1] = 0x00; + gpio |= 0x04; /* LED on */ + } else { + buf[0] = 0x10; /* stall EPA */ + buf[1] = 0x02; /* reset EPA */ + gpio &= (~0x04); /* LED off */ + } + + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio); + if (ret) + goto err; + + ret = rtl2831_wr_regs(adap->dev, USB_EPA_CTL, buf, 2); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + u8 gpio, sys0; + + deb_info("%s: onoff=%d\n", __func__, onoff); + + /* demod adc */ + ret = rtl2831_rd_reg(d, SYS_SYS0, &sys0); + if (ret) + goto err; + + /* tuner power, read GPIOs */ + ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); + if (ret) + goto err; + + deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + + if (onoff) { + gpio |= 0x01; /* GPIO0 = 1 */ + gpio &= (~0x10); /* GPIO4 = 0 */ + sys0 = sys0 & 0x0f; + sys0 |= 0xe0; + } else { + gpio &= (~0x01); /* GPIO0 = 0 */ + gpio |= 0x10; /* GPIO4 = 1 */ + sys0 = sys0 & (~0xc0); + } + + deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + + /* demod adc */ + ret = rtl2831_wr_reg(d, SYS_SYS0, sys0); + if (ret) + goto err; + + /* tuner power, write GPIOs */ + ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2831u_rc_query(struct dvb_usb_device *d) +{ + int ret, i; + struct rtl28xxu_priv *priv = d->priv; + u8 buf[5]; + u32 rc_code; + struct rtl28xxu_reg_val rc_nec_tab[] = { + { 0x3033, 0x80 }, + { 0x3020, 0x43 }, + { 0x3021, 0x16 }, + { 0x3022, 0x16 }, + { 0x3023, 0x5a }, + { 0x3024, 0x2d }, + { 0x3025, 0x16 }, + { 0x3026, 0x01 }, + { 0x3028, 0xb0 }, + { 0x3029, 0x04 }, + { 0x302c, 0x88 }, + { 0x302e, 0x13 }, + { 0x3030, 0xdf }, + { 0x3031, 0x05 }, + }; + + /* init remote controller */ + if (!priv->rc_active) { + for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { + ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, + rc_nec_tab[i].val); + if (ret) + goto err; + } + priv->rc_active = true; + } + + ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); + if (ret) + goto err; + + if (buf[4] & 0x01) { + if (buf[2] == (u8) ~buf[3]) { + if (buf[0] == (u8) ~buf[1]) { + /* NEC standard (16 bit) */ + rc_code = buf[0] << 8 | buf[2]; + } else { + /* NEC extended (24 bit) */ + rc_code = buf[0] << 16 | + buf[1] << 8 | buf[2]; + } + } else { + /* NEC full (32 bit) */ + rc_code = buf[0] << 24 | buf[1] << 16 | + buf[2] << 8 | buf[3]; + } + + rc_keydown(d->rc_dev, rc_code, 0); + + ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1); + if (ret) + goto err; + + /* repeated intentionally to avoid extra keypress */ + ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1); + if (ret) + goto err; + } + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832u_rc_query(struct dvb_usb_device *d) +{ + int ret, i; + struct rtl28xxu_priv *priv = d->priv; + u8 buf[128]; + int len; + struct rtl28xxu_reg_val rc_nec_tab[] = { + { IR_RX_CTRL, 0x20 }, + { IR_RX_BUF_CTRL, 0x80 }, + { IR_RX_IF, 0xff }, + { IR_RX_IE, 0xff }, + { IR_MAX_DURATION0, 0xd0 }, + { IR_MAX_DURATION1, 0x07 }, + { IR_IDLE_LEN0, 0xc0 }, + { IR_IDLE_LEN1, 0x00 }, + { IR_GLITCH_LEN, 0x03 }, + { IR_RX_CLK, 0x09 }, + { IR_RX_CFG, 0x1c }, + { IR_MAX_H_TOL_LEN, 0x1e }, + { IR_MAX_L_TOL_LEN, 0x1e }, + { IR_RX_CTRL, 0x80 }, + }; + + /* init remote controller */ + if (!priv->rc_active) { + for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { + ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, + rc_nec_tab[i].val); + if (ret) + goto err; + } + priv->rc_active = true; + } + + ret = rtl2831_rd_reg(d, IR_RX_IF, &buf[0]); + if (ret) + goto err; + + if (buf[0] != 0x83) + goto exit; + + ret = rtl2831_rd_reg(d, IR_RX_BC, &buf[0]); + if (ret) + goto err; + + len = buf[0]; + ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); + + /* TODO: pass raw IR to Kernel IR decoder */ + + ret = rtl2831_wr_reg(d, IR_RX_IF, 0x03); + ret = rtl2831_wr_reg(d, IR_RX_BUF_CTRL, 0x80); + ret = rtl2831_wr_reg(d, IR_RX_CTRL, 0x80); + +exit: + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +enum rtl28xxu_usb_table_entry { + RTL2831U_0BDA_2831, + RTL2831U_14AA_0160, + RTL2831U_14AA_0161, +}; + +static struct usb_device_id rtl28xxu_table[] = { + /* RTL2831U */ + [RTL2831U_0BDA_2831] = { + USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)}, + [RTL2831U_14AA_0160] = { + USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)}, + [RTL2831U_14AA_0161] = { + USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)}, + + /* RTL2832U */ + {} /* terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, rtl28xxu_table); + +static struct dvb_usb_device_properties rtl28xxu_properties[] = { + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = { + { + .frontend_attach = rtl2831u_frontend_attach, + .tuner_attach = rtl2831u_tuner_attach, + .streaming_ctrl = rtl28xxu_streaming_ctrl, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 8*512, + } + } + } + } + } + } + }, + + .power_ctrl = rtl28xxu_power_ctrl, + + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "rtl28xxu", + .rc_query = rtl2831u_rc_query, + .rc_interval = 400, + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_EMPTY, + }, + + .i2c_algo = &rtl28xxu_i2c_algo, + + .num_device_descs = 2, + .devices = { + { + .name = "Realtek RTL2831U reference design", + .warm_ids = { + &rtl28xxu_table[RTL2831U_0BDA_2831], + }, + }, + { + .name = "Freecom USB2.0 DVB-T", + .warm_ids = { + &rtl28xxu_table[RTL2831U_14AA_0160], + &rtl28xxu_table[RTL2831U_14AA_0161], + }, + }, + } + }, + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = { + { + .frontend_attach = rtl2832u_frontend_attach, + .tuner_attach = rtl2832u_tuner_attach, + .streaming_ctrl = rtl28xxu_streaming_ctrl, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 8*512, + } + } + } + } + } + } + }, + + .power_ctrl = rtl28xxu_power_ctrl, + + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "rtl28xxu", + .rc_query = rtl2832u_rc_query, + .rc_interval = 400, + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_EMPTY, + }, + + .i2c_algo = &rtl28xxu_i2c_algo, + + .num_device_descs = 0, /* disabled as no support for RTL2832 */ + .devices = { + { + .name = "Realtek RTL2832U reference design", + }, + } + }, + +}; + +static int rtl28xxu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret, i; + int properties_count = ARRAY_SIZE(rtl28xxu_properties); + struct dvb_usb_device *d; + + deb_info("%s: interface=%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return 0; + + for (i = 0; i < properties_count; i++) { + ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i], + THIS_MODULE, &d, adapter_nr); + if (ret == 0 || ret != -ENODEV) + break; + } + + if (ret) + goto err; + + /* init USB endpoints */ + ret = rtl2831_wr_reg(d, USB_SYSCTL_0, 0x09); + if (ret) + goto err; + + ret = rtl2831_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); + if (ret) + goto err; + + ret = rtl2831_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct usb_driver rtl28xxu_driver = { + .name = "dvb_usb_rtl28xxu", + .probe = rtl28xxu_probe, + .disconnect = dvb_usb_device_exit, + .id_table = rtl28xxu_table, +}; + +/* module stuff */ +static int __init rtl28xxu_module_init(void) +{ + int ret; + + deb_info("%s:\n", __func__); + + ret = usb_register(&rtl28xxu_driver); + if (ret) + err("usb_register failed=%d", ret); + + return ret; +} + +static void __exit rtl28xxu_module_exit(void) +{ + deb_info("%s:\n", __func__); + + /* deregister this driver from the USB subsystem */ + usb_deregister(&rtl28xxu_driver); +} + +module_init(rtl28xxu_module_init); +module_exit(rtl28xxu_module_exit); + +MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb/rtl28xxu.h new file mode 100644 index 000000000000..90f3bb4f4c0e --- /dev/null +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.h @@ -0,0 +1,264 @@ +/* + * Realtek RTL28xxU DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL28XXU_H +#define RTL28XXU_H + +#define DVB_USB_LOG_PREFIX "rtl28xxu" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args) +#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args) +#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args) + +#define deb_dump(r, t, v, i, b, l, func) { \ + int loop_; \ + func("%02x %02x %02x %02x %02x %02x %02x %02x", \ + t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ + if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ + func(" >>> "); \ + else \ + func(" <<< "); \ + for (loop_ = 0; loop_ < l; loop_++) \ + func("%02x ", b[loop_]); \ + func("\n");\ +} + +/* + * USB commands + * (usb_control_msg() index parameter) + */ + +#define DEMOD 0x0000 +#define USB 0x0100 +#define SYS 0x0200 +#define I2C 0x0300 +#define I2C_DA 0x0600 + +#define CMD_WR_FLAG 0x0010 +#define CMD_DEMOD_RD 0x0000 +#define CMD_DEMOD_WR 0x0010 +#define CMD_USB_RD 0x0100 +#define CMD_USB_WR 0x0110 +#define CMD_SYS_RD 0x0200 +#define CMD_IR_RD 0x0201 +#define CMD_IR_WR 0x0211 +#define CMD_SYS_WR 0x0210 +#define CMD_I2C_RD 0x0300 +#define CMD_I2C_WR 0x0310 +#define CMD_I2C_DA_RD 0x0600 +#define CMD_I2C_DA_WR 0x0610 + + +struct rtl28xxu_priv { + u8 chip_id; + u8 tuner; + u8 page; /* integrated demod active register page */ + bool rc_active; +}; + +enum rtl28xxu_chip_id { + CHIP_ID_NONE, + CHIP_ID_RTL2831U, + CHIP_ID_RTL2832U, +}; + +enum rtl28xxu_tuner { + TUNER_NONE, + + TUNER_RTL2830_QT1010, + TUNER_RTL2830_MT2060, + TUNER_RTL2830_MXL5005S, + + TUNER_RTL2832_MT2266, + TUNER_RTL2832_FC2580, + TUNER_RTL2832_MT2063, + TUNER_RTL2832_MAX3543, + TUNER_RTL2832_TUA9001, + TUNER_RTL2832_MXL5007T, + TUNER_RTL2832_FC0012, + TUNER_RTL2832_E4000, + TUNER_RTL2832_TDA18272, + TUNER_RTL2832_FC0013, +}; + +struct rtl28xxu_req { + u16 value; + u16 index; + u16 size; + u8 *data; +}; + +struct rtl28xxu_reg_val { + u16 reg; + u8 val; +}; + +/* + * memory map + * + * 0x0000 DEMOD : demodulator + * 0x2000 USB : SIE, USB endpoint, debug, DMA + * 0x3000 SYS : system + * 0xfc00 RC : remote controller (not RTL2831U) + */ + +/* + * USB registers + */ +/* SIE Control Registers */ +#define USB_SYSCTL 0x2000 /* USB system control */ +#define USB_SYSCTL_0 0x2000 /* USB system control */ +#define USB_SYSCTL_1 0x2001 /* USB system control */ +#define USB_SYSCTL_2 0x2002 /* USB system control */ +#define USB_SYSCTL_3 0x2003 /* USB system control */ +#define USB_IRQSTAT 0x2008 /* SIE interrupt status */ +#define USB_IRQEN 0x200C /* SIE interrupt enable */ +#define USB_CTRL 0x2010 /* USB control */ +#define USB_STAT 0x2014 /* USB status */ +#define USB_DEVADDR 0x2018 /* USB device address */ +#define USB_TEST 0x201C /* USB test mode */ +#define USB_FRAME_NUMBER 0x2020 /* frame number */ +#define USB_FIFO_ADDR 0x2028 /* address of SIE FIFO RAM */ +#define USB_FIFO_CMD 0x202A /* SIE FIFO RAM access command */ +#define USB_FIFO_DATA 0x2030 /* SIE FIFO RAM data */ +/* Endpoint Registers */ +#define EP0_SETUPA 0x20F8 /* EP 0 setup packet lower byte */ +#define EP0_SETUPB 0x20FC /* EP 0 setup packet higher byte */ +#define USB_EP0_CFG 0x2104 /* EP 0 configure */ +#define USB_EP0_CTL 0x2108 /* EP 0 control */ +#define USB_EP0_STAT 0x210C /* EP 0 status */ +#define USB_EP0_IRQSTAT 0x2110 /* EP 0 interrupt status */ +#define USB_EP0_IRQEN 0x2114 /* EP 0 interrupt enable */ +#define USB_EP0_MAXPKT 0x2118 /* EP 0 max packet size */ +#define USB_EP0_BC 0x2120 /* EP 0 FIFO byte counter */ +#define USB_EPA_CFG 0x2144 /* EP A configure */ +#define USB_EPA_CFG_0 0x2144 /* EP A configure */ +#define USB_EPA_CFG_1 0x2145 /* EP A configure */ +#define USB_EPA_CFG_2 0x2146 /* EP A configure */ +#define USB_EPA_CFG_3 0x2147 /* EP A configure */ +#define USB_EPA_CTL 0x2148 /* EP A control */ +#define USB_EPA_CTL_0 0x2148 /* EP A control */ +#define USB_EPA_CTL_1 0x2149 /* EP A control */ +#define USB_EPA_CTL_2 0x214A /* EP A control */ +#define USB_EPA_CTL_3 0x214B /* EP A control */ +#define USB_EPA_STAT 0x214C /* EP A status */ +#define USB_EPA_IRQSTAT 0x2150 /* EP A interrupt status */ +#define USB_EPA_IRQEN 0x2154 /* EP A interrupt enable */ +#define USB_EPA_MAXPKT 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_0 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_1 0x2159 /* EP A max packet size */ +#define USB_EPA_MAXPKT_2 0x215A /* EP A max packet size */ +#define USB_EPA_MAXPKT_3 0x215B /* EP A max packet size */ +#define USB_EPA_FIFO_CFG 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */ +/* Debug Registers */ +#define USB_PHYTSTDIS 0x2F04 /* PHY test disable */ +#define USB_TOUT_VAL 0x2F08 /* USB time-out time */ +#define USB_VDRCTRL 0x2F10 /* UTMI vendor signal control */ +#define USB_VSTAIN 0x2F14 /* UTMI vendor signal status in */ +#define USB_VLOADM 0x2F18 /* UTMI load vendor signal status in */ +#define USB_VSTAOUT 0x2F1C /* UTMI vendor signal status out */ +#define USB_UTMI_TST 0x2F80 /* UTMI test */ +#define USB_UTMI_STATUS 0x2F84 /* UTMI status */ +#define USB_TSTCTL 0x2F88 /* test control */ +#define USB_TSTCTL2 0x2F8C /* test control 2 */ +#define USB_PID_FORCE 0x2F90 /* force PID */ +#define USB_PKTERR_CNT 0x2F94 /* packet error counter */ +#define USB_RXERR_CNT 0x2F98 /* RX error counter */ +#define USB_MEM_BIST 0x2F9C /* MEM BIST test */ +#define USB_SLBBIST 0x2FA0 /* self-loop-back BIST */ +#define USB_CNTTEST 0x2FA4 /* counter test */ +#define USB_PHYTST 0x2FC0 /* USB PHY test */ +#define USB_DBGIDX 0x2FF0 /* select individual block debug signal */ +#define USB_DBGMUX 0x2FF4 /* debug signal module mux */ + +/* + * SYS registers + */ +/* demod control registers */ +#define SYS_SYS0 0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */ +#define SYS_DEMOD_CTL 0x3000 /* control register for DVB-T demodulator */ +/* GPIO registers */ +#define SYS_GPIO_OUT_VAL 0x3001 /* output value of GPIO */ +#define SYS_GPIO_IN_VAL 0x3002 /* input value of GPIO */ +#define SYS_GPIO_OUT_EN 0x3003 /* output enable of GPIO */ +#define SYS_SYS1 0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */ +#define SYS_GPIO_DIR 0x3004 /* direction control for GPIO */ +#define SYS_SYSINTE 0x3005 /* system interrupt enable */ +#define SYS_SYSINTS 0x3006 /* system interrupt status */ +#define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */ +#define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */ +#define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */ +#define SYS_DEMOD_CTL1 0x300B + +/* IrDA registers */ +#define SYS_IRRC_PSR 0x3020 /* IR protocol selection */ +#define SYS_IRRC_PER 0x3024 /* IR protocol extension */ +#define SYS_IRRC_SF 0x3028 /* IR sampling frequency */ +#define SYS_IRRC_DPIR 0x302C /* IR data package interval */ +#define SYS_IRRC_CR 0x3030 /* IR control */ +#define SYS_IRRC_RP 0x3034 /* IR read port */ +#define SYS_IRRC_SR 0x3038 /* IR status */ +/* I2C master registers */ +#define SYS_I2CCR 0x3040 /* I2C clock */ +#define SYS_I2CMCR 0x3044 /* I2C master control */ +#define SYS_I2CMSTR 0x3048 /* I2C master SCL timing */ +#define SYS_I2CMSR 0x304C /* I2C master status */ +#define SYS_I2CMFR 0x3050 /* I2C master FIFO */ + +/* + * IR registers + */ +#define IR_RX_BUF 0xFC00 +#define IR_RX_IE 0xFD00 +#define IR_RX_IF 0xFD01 +#define IR_RX_CTRL 0xFD02 +#define IR_RX_CFG 0xFD03 +#define IR_MAX_DURATION0 0xFD04 +#define IR_MAX_DURATION1 0xFD05 +#define IR_IDLE_LEN0 0xFD06 +#define IR_IDLE_LEN1 0xFD07 +#define IR_GLITCH_LEN 0xFD08 +#define IR_RX_BUF_CTRL 0xFD09 +#define IR_RX_BUF_DATA 0xFD0A +#define IR_RX_BC 0xFD0B +#define IR_RX_CLK 0xFD0C +#define IR_RX_C_COUNT_L 0xFD0D +#define IR_RX_C_COUNT_H 0xFD0E +#define IR_SUSPEND_CTRL 0xFD10 +#define IR_ERR_TOL_CTRL 0xFD11 +#define IR_UNIT_LEN 0xFD12 +#define IR_ERR_TOL_LEN 0xFD13 +#define IR_MAX_H_TOL_LEN 0xFD14 +#define IR_MAX_L_TOL_LEN 0xFD15 +#define IR_MASK_CTRL 0xFD16 +#define IR_MASK_DATA 0xFD17 +#define IR_RES_MASK_ADDR 0xFD18 +#define IR_RES_MASK_T_LEN 0xFD19 + +#endif diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index ebb5ed7a7783..21246707fbfb 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -425,6 +425,13 @@ config DVB_CXD2820R help Say Y when you want to support this frontend. +config DVB_RTL2830 + tristate "Realtek RTL2830 DVB-T" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Say Y when you want to support this frontend. + comment "DVB-C (cable) frontends" depends on DVB_CORE @@ -698,6 +705,14 @@ config DVB_IT913X_FE A DVB-T tuner module. Say Y when you want to support this frontend. +config DVB_M88RS2000 + tristate "M88RS2000 DVB-S demodulator and tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. + Say Y when you want to support this frontend. + comment "Tools to develop new frontends" config DVB_DUMMY_FE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 00a20636df62..86fa808bf589 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -2,8 +2,8 @@ # Makefile for the kernel DVB frontend device drivers. # -ccflags-y += -Idrivers/media/dvb/dvb-core/ -ccflags-y += -Idrivers/media/common/tuners/ +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core/ +ccflags-y += -I$(srctree)/drivers/media/common/tuners/ stb0899-objs = stb0899_drv.o stb0899_algo.o stv0900-objs = stv0900_core.o stv0900_sw.o @@ -96,4 +96,6 @@ obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o obj-$(CONFIG_DVB_A8293) += a8293.o obj-$(CONFIG_DVB_TDA10071) += tda10071.o +obj-$(CONFIG_DVB_RTL2830) += rtl2830.o +obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c index 2b248c12f404..55b6390198e3 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb/frontends/au8522_decoder.c @@ -839,15 +839,4 @@ static struct i2c_driver au8522_driver = { .id_table = au8522_id, }; -static __init int init_au8522(void) -{ - return i2c_add_driver(&au8522_driver); -} - -static __exit void exit_au8522(void) -{ - i2c_del_driver(&au8522_driver); -} - -module_init(init_au8522); -module_exit(exit_au8522); +module_i2c_driver(au8522_driver); diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c index c688b95df486..25f650934c73 100644 --- a/drivers/media/dvb/frontends/au8522_dig.c +++ b/drivers/media/dvb/frontends/au8522_dig.c @@ -588,11 +588,6 @@ static int au8522_set_frontend(struct dvb_frontend *fe) (state->current_modulation == c->modulation)) return 0; - au8522_enable_modulation(fe, c->modulation); - - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -604,6 +599,11 @@ static int au8522_set_frontend(struct dvb_frontend *fe) if (ret < 0) return ret; + /* Allow the tuner to settle */ + msleep(100); + + au8522_enable_modulation(fe, c->modulation); + state->current_frequency = c->frequency; return 0; diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index faba82485086..edc8eafc5c09 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -502,10 +502,26 @@ static int cx22702_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) { struct cx22702_state *state = fe->demodulator_priv; + u8 reg23; - u16 rs_ber; - rs_ber = cx22702_readreg(state, 0x23); - *signal_strength = (rs_ber << 8) | rs_ber; + /* + * Experience suggests that the strength signal register works as + * follows: + * - In the absence of signal, value is 0xff. + * - In the presence of a weak signal, bit 7 is set, not sure what + * the lower 7 bits mean. + * - In the presence of a strong signal, the register holds a 7-bit + * value (bit 7 is cleared), with greater values standing for + * weaker signals. + */ + reg23 = cx22702_readreg(state, 0x23); + if (reg23 & 0x80) { + *signal_strength = 0; + } else { + reg23 = ~reg23 & 0x7f; + /* Scale to 16 bit */ + *signal_strength = (reg23 << 9) | (reg23 << 2) | (reg23 >> 5); + } return 0; } diff --git a/drivers/media/dvb/frontends/dib0090.c b/drivers/media/dvb/frontends/dib0090.c index 224d81e85091..d9fe60b4be48 100644 --- a/drivers/media/dvb/frontends/dib0090.c +++ b/drivers/media/dvb/frontends/dib0090.c @@ -519,7 +519,7 @@ static int dib0090_fw_identify(struct dvb_frontend *fe) return 0; identification_error: - return -EIO;; + return -EIO; } static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg) diff --git a/drivers/media/dvb/frontends/dib9000.c b/drivers/media/dvb/frontends/dib9000.c index 863ef3cfab9f..80848b4c15d4 100644 --- a/drivers/media/dvb/frontends/dib9000.c +++ b/drivers/media/dvb/frontends/dib9000.c @@ -33,7 +33,7 @@ struct i2c_device { /* lock */ #define DIB_LOCK struct mutex -#define DibAcquireLock(lock) do { if (mutex_lock_interruptible(lock) < 0) dprintk("could not get the lock"); } while (0) +#define DibAcquireLock(lock) mutex_lock_interruptible(lock) #define DibReleaseLock(lock) mutex_unlock(lock) #define DibInitLock(lock) mutex_init(lock) #define DibFreeLock(lock) @@ -446,7 +446,10 @@ static int dib9000_risc_mem_read(struct dib9000_state *state, u8 cmd, u8 * b, u1 if (!state->platform.risc.fw_is_running) return -EIO; - DibAcquireLock(&state->platform.risc.mem_lock); + if (DibAcquireLock(&state->platform.risc.mem_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } dib9000_risc_mem_setup(state, cmd | 0x80); dib9000_risc_mem_read_chunks(state, b, len); DibReleaseLock(&state->platform.risc.mem_lock); @@ -459,7 +462,10 @@ static int dib9000_risc_mem_write(struct dib9000_state *state, u8 cmd, const u8 if (!state->platform.risc.fw_is_running) return -EIO; - DibAcquireLock(&state->platform.risc.mem_lock); + if (DibAcquireLock(&state->platform.risc.mem_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } dib9000_risc_mem_setup(state, cmd); dib9000_risc_mem_write_chunks(state, b, m->size); DibReleaseLock(&state->platform.risc.mem_lock); @@ -531,7 +537,10 @@ static int dib9000_mbx_send_attr(struct dib9000_state *state, u8 id, u16 * data, if (!state->platform.risc.fw_is_running) return -EINVAL; - DibAcquireLock(&state->platform.risc.mbx_if_lock); + if (DibAcquireLock(&state->platform.risc.mbx_if_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } tmp = MAX_MAILBOX_TRY; do { size = dib9000_read_word_attr(state, 1043, attr) & 0xff; @@ -593,7 +602,10 @@ static u8 dib9000_mbx_read(struct dib9000_state *state, u16 * data, u8 risc_id, if (!state->platform.risc.fw_is_running) return 0; - DibAcquireLock(&state->platform.risc.mbx_if_lock); + if (DibAcquireLock(&state->platform.risc.mbx_if_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } if (risc_id == 1) mc_base = 16; else @@ -701,7 +713,10 @@ static int dib9000_mbx_process(struct dib9000_state *state, u16 attr) if (!state->platform.risc.fw_is_running) return -1; - DibAcquireLock(&state->platform.risc.mbx_lock); + if (DibAcquireLock(&state->platform.risc.mbx_lock) < 0) { + dprintk("could not get the lock"); + return -1; + } if (dib9000_mbx_count(state, 1, attr)) /* 1=RiscB */ ret = dib9000_mbx_fetch_to_cache(state, attr); @@ -1178,7 +1193,10 @@ static int dib9000_fw_get_channel(struct dvb_frontend *fe) struct dibDVBTChannel *ch; int ret = 0; - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { ret = -EIO; goto error; @@ -1660,7 +1678,10 @@ static int dib9000_fw_component_bus_xfer(struct i2c_adapter *i2c_adap, struct i2 p[12] = 0; } - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } dib9000_risc_mem_write(state, FE_MM_W_COMPONENT_ACCESS, p); @@ -1768,7 +1789,10 @@ int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) return 0; } - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } val = dib9000_read_word(state, 294 + 1) & 0xffef; val |= (onoff & 0x1) << 4; @@ -1800,7 +1824,10 @@ int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) return 0; } - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff); ret = dib9000_write_word(state, 300 + 1 + id, onoff ? (1 << 13) | pid : 0); @@ -1848,7 +1875,10 @@ static int dib9000_sleep(struct dvb_frontend *fe) u8 index_frontend; int ret = 0; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]); if (ret < 0) @@ -1874,8 +1904,12 @@ static int dib9000_get_frontend(struct dvb_frontend *fe) fe_status_t stat; int ret = 0; - if (state->get_frontend_internal == 0) - DibAcquireLock(&state->demod_lock); + if (state->get_frontend_internal == 0) { + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + } for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat); @@ -1978,7 +2012,10 @@ static int dib9000_set_frontend(struct dvb_frontend *fe) } state->pid_ctrl_index = -1; /* postpone the pid filtering cmd */ - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } fe->dtv_property_cache.delivery_system = SYS_DVBT; @@ -2138,7 +2175,10 @@ static int dib9000_read_status(struct dvb_frontend *fe, fe_status_t * stat) u8 index_frontend; u16 lock = 0, lock_slave = 0; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) lock_slave |= dib9000_read_lock(state->fe[index_frontend]); @@ -2168,8 +2208,15 @@ static int dib9000_read_ber(struct dvb_frontend *fe, u32 * ber) u16 *c; int ret = 0; - DibAcquireLock(&state->demod_lock); - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { DibReleaseLock(&state->platform.risc.mem_mbx_lock); ret = -EIO; @@ -2196,7 +2243,10 @@ static int dib9000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) u16 val; int ret = 0; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } *strength = 0; for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val); @@ -2206,8 +2256,13 @@ static int dib9000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) *strength += val; } - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + DibReleaseLock(&state->platform.risc.mem_mbx_lock); ret = -EIO; goto error; } @@ -2232,9 +2287,14 @@ static u32 dib9000_get_snr(struct dvb_frontend *fe) u32 n, s, exp; u16 val; - DibAcquireLock(&state->platform.risc.mem_mbx_lock); - if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) - return -EIO; + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } + if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + DibReleaseLock(&state->platform.risc.mem_mbx_lock); + return 0; + } dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2); DibReleaseLock(&state->platform.risc.mem_mbx_lock); @@ -2266,7 +2326,10 @@ static int dib9000_read_snr(struct dvb_frontend *fe, u16 * snr) u8 index_frontend; u32 snr_master; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } snr_master = dib9000_get_snr(fe); for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) snr_master += dib9000_get_snr(state->fe[index_frontend]); @@ -2288,9 +2351,17 @@ static int dib9000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) u16 *c = (u16 *)state->i2c_read_buffer; int ret = 0; - DibAcquireLock(&state->demod_lock); - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + DibReleaseLock(&state->platform.risc.mem_mbx_lock); ret = -EIO; goto error; } diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb/frontends/drxd_hard.c index 7bf39cda83c5..f380eb43e9d5 100644 --- a/drivers/media/dvb/frontends/drxd_hard.c +++ b/drivers/media/dvb/frontends/drxd_hard.c @@ -101,9 +101,9 @@ struct SCfgAgc { struct SNoiseCal { int cpOpt; - u16 cpNexpOfs; - u16 tdCal2k; - u16 tdCal8k; + short cpNexpOfs; + short tdCal2k; + short tdCal8k; }; enum app_env { diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h index 020981844a86..9d64e4fea066 100644 --- a/drivers/media/dvb/frontends/drxk.h +++ b/drivers/media/dvb/frontends/drxk.h @@ -7,15 +7,19 @@ /** * struct drxk_config - Configure the initial parameters for DRX-K * - * adr: I2C Address of the DRX-K - * parallel_ts: true means that the device uses parallel TS, + * @adr: I2C Address of the DRX-K + * @parallel_ts: True means that the device uses parallel TS, * Serial otherwise. - * single_master: Device is on the single master mode - * no_i2c_bridge: Don't switch the I2C bridge to talk with tuner - * antenna_gpio: GPIO bit used to control the antenna - * antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 + * @dynamic_clk: True means that the clock will be dynamically + * adjusted. Static clock otherwise. + * @enable_merr_cfg: Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG. + * @single_master: Device is on the single master mode + * @no_i2c_bridge: Don't switch the I2C bridge to talk with tuner + * @antenna_gpio: GPIO bit used to control the antenna + * @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 * means that 1=DVBC, 0 = DVBT. Zero means the opposite. - * microcode_name: Name of the firmware file with the microcode + * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength. + * @microcode_name: Name of the firmware file with the microcode * * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is * UIO-3. @@ -25,11 +29,14 @@ struct drxk_config { bool single_master; bool no_i2c_bridge; bool parallel_ts; + bool dynamic_clk; + bool enable_merr_cfg; bool antenna_dvbt; u16 antenna_gpio; - int chunk_size; + u8 mpeg_out_clk_strength; + int chunk_size; const char *microcode_name; }; diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 5ab53795bd7a..36d11756492f 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -90,10 +90,6 @@ bool IsA1WithRomCode(struct drxk_state *state) #define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03) #endif -#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH -#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06) -#endif - #define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700 #define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500 @@ -649,9 +645,6 @@ static int init_state(struct drxk_state *state) u32 ulQual83 = DEFAULT_MER_83; u32 ulQual93 = DEFAULT_MER_93; - u32 ulDVBTStaticTSClock = 1; - u32 ulDVBCStaticTSClock = 1; - u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; @@ -661,7 +654,6 @@ static int init_state(struct drxk_state *state) u32 ulGPIOCfg = 0x0113; u32 ulInvertTSClock = 0; u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH; - u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH; u32 ulDVBTBitrate = 50000000; u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8; @@ -814,8 +806,7 @@ static int init_state(struct drxk_state *state) state->m_invertSTR = false; /* If TRUE; invert STR signals */ state->m_invertVAL = false; /* If TRUE; invert VAL signals */ state->m_invertCLK = (ulInvertTSClock != 0); /* If TRUE; invert CLK signals */ - state->m_DVBTStaticCLK = (ulDVBTStaticTSClock != 0); - state->m_DVBCStaticCLK = (ulDVBCStaticTSClock != 0); + /* If TRUE; static MPEG clockrate will be used; otherwise clockrate will adapt to the bitrate of the TS */ @@ -823,7 +814,6 @@ static int init_state(struct drxk_state *state) state->m_DVBCBitrate = ulDVBCBitrate; state->m_TSDataStrength = (ulTSDataStrength & 0x07); - state->m_TSClockkStrength = (ulTSClockkStrength & 0x07); /* Maximum bitrate in b/s in case static clockrate is selected */ state->m_mpegTsStaticBitrate = 19392658; @@ -1188,6 +1178,7 @@ static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable) int status = -1; u16 sioPdrMclkCfg = 0; u16 sioPdrMdxCfg = 0; + u16 err_cfg = 0; dprintk(1, ": mpeg %s, %s mode\n", mpegEnable ? "enable" : "disable", @@ -1253,12 +1244,17 @@ static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable) status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg); if (status < 0) goto error; - status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); /* Disable */ + + if (state->enable_merr_cfg) + err_cfg = sioPdrMdxCfg; + + status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg); if (status < 0) goto error; - status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); /* Disable */ + status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg); if (status < 0) goto error; + if (state->m_enableParallel == true) { /* paralel -> enable MD1 to MD7 */ status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg); @@ -6069,9 +6065,7 @@ static int init_drxk(struct drxk_state *state) if (status < 0) goto error; - if (!state->microcode_name) - load_microcode(state, "drxk_a3.mc"); - else + if (state->microcode_name) load_microcode(state, state->microcode_name); /* disable token-ring bus through OFDM block for possible ucode upload */ @@ -6322,15 +6316,12 @@ static int drxk_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_t switch (p->delivery_system) { case SYS_DVBC_ANNEX_A: case SYS_DVBC_ANNEX_C: + case SYS_DVBT: sets->min_delay_ms = 3000; sets->max_drift = 0; sets->step_size = 0; return 0; default: - /* - * For DVB-T, let it use the default DVB core way, that is: - * fepriv->step_size = fe->ops.info.frequency_stepsize * 2 - */ return -EINVAL; } } @@ -6390,6 +6381,21 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config, state->antenna_gpio = config->antenna_gpio; state->antenna_dvbt = config->antenna_dvbt; state->m_ChunkSize = config->chunk_size; + state->enable_merr_cfg = config->enable_merr_cfg; + + if (config->dynamic_clk) { + state->m_DVBTStaticCLK = 0; + state->m_DVBCStaticCLK = 0; + } else { + state->m_DVBTStaticCLK = 1; + state->m_DVBCStaticCLK = 1; + } + + + if (config->mpeg_out_clk_strength) + state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07; + else + state->m_TSClockkStrength = 0x06; if (config->parallel_ts) state->m_enableParallel = true; diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h index 3a58b73eb9b9..4bbf841de83a 100644 --- a/drivers/media/dvb/frontends/drxk_hard.h +++ b/drivers/media/dvb/frontends/drxk_hard.h @@ -332,6 +332,7 @@ struct drxk_state { u16 UIO_mask; /* Bits used by UIO */ + bool enable_merr_cfg; bool single_master; bool no_i2c_bridge; bool antenna_dvbt; diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb/frontends/it913x-fe-priv.h index 93b086ea7e1c..eb6fd8aebdb3 100644 --- a/drivers/media/dvb/frontends/it913x-fe-priv.h +++ b/drivers/media/dvb/frontends/it913x-fe-priv.h @@ -201,6 +201,11 @@ fe_modulation_t fe_con[] = { QAM_64, }; +enum { + PRIORITY_HIGH = 0, /* High-priority stream */ + PRIORITY_LOW, /* Low-priority stream */ +}; + /* Standard demodulator functions */ static struct it913xset set_solo_fe[] = { {PRO_LINK, GPIOH5_EN, {0x01}, 0x01}, diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb/frontends/it913x-fe.c index ccc36bf2deb4..84df03c29179 100644 --- a/drivers/media/dvb/frontends/it913x-fe.c +++ b/drivers/media/dvb/frontends/it913x-fe.c @@ -57,6 +57,7 @@ struct it913x_fe_state { u32 frequency; fe_modulation_t constellation; fe_transmit_mode_t transmission_mode; + u8 priority; u32 crystalFrequency; u32 adcFrequency; u8 tuner_type; @@ -500,19 +501,87 @@ static int it913x_fe_read_status(struct dvb_frontend *fe, fe_status_t *status) return 0; } +/* FEC values based on fe_code_rate_t non supported values 0*/ +int it913x_qpsk_pval[] = {0, -93, -91, -90, 0, -89, -88}; +int it913x_16qam_pval[] = {0, -87, -85, -84, 0, -83, -82}; +int it913x_64qam_pval[] = {0, -82, -80, -78, 0, -77, -76}; + +static int it913x_get_signal_strength(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct it913x_fe_state *state = fe->demodulator_priv; + u8 code_rate; + int ret, temp; + u8 lna_gain_os; + + ret = it913x_read_reg_u8(state, VAR_P_INBAND); + if (ret < 0) + return ret; + + /* VHF/UHF gain offset */ + if (state->frequency < 300000000) + lna_gain_os = 7; + else + lna_gain_os = 14; + + temp = (ret - 100) - lna_gain_os; + + if (state->priority == PRIORITY_HIGH) + code_rate = p->code_rate_HP; + else + code_rate = p->code_rate_LP; + + if (code_rate >= ARRAY_SIZE(it913x_qpsk_pval)) + return -EINVAL; + + deb_info("Reg VAR_P_INBAND:%d Calc Offset Value:%d", ret, temp); + + /* Apply FEC offset values*/ + switch (p->modulation) { + case QPSK: + temp -= it913x_qpsk_pval[code_rate]; + break; + case QAM_16: + temp -= it913x_16qam_pval[code_rate]; + break; + case QAM_64: + temp -= it913x_64qam_pval[code_rate]; + break; + default: + return -EINVAL; + } + + if (temp < -15) + ret = 0; + else if ((-15 <= temp) && (temp < 0)) + ret = (2 * (temp + 15)) / 3; + else if ((0 <= temp) && (temp < 20)) + ret = 4 * temp + 10; + else if ((20 <= temp) && (temp < 35)) + ret = (2 * (temp - 20)) / 3 + 90; + else if (temp >= 35) + ret = 100; + + deb_info("Signal Strength :%d", ret); + + return ret; +} + static int it913x_fe_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct it913x_fe_state *state = fe->demodulator_priv; - int ret = it913x_read_reg_u8(state, SIGNAL_LEVEL); - /*SIGNAL_LEVEL always returns 100%! so using FE_HAS_SIGNAL as switch*/ - if (state->it913x_status & FE_HAS_SIGNAL) - ret = (ret * 0xff) / 0x64; - else - ret = 0x0; - ret |= ret << 0x8; - *strength = ret; - return 0; + int ret = 0; + if (state->config->read_slevel) { + if (state->it913x_status & FE_HAS_SIGNAL) + ret = it913x_read_reg_u8(state, SIGNAL_LEVEL); + } else + ret = it913x_get_signal_strength(fe); + + if (ret >= 0) + *strength = (u16)((u32)ret * 0xffff / 0x64); + + return (ret < 0) ? -ENODEV : 0; } static int it913x_fe_read_snr(struct dvb_frontend *fe, u16 *snr) @@ -606,6 +675,8 @@ static int it913x_fe_get_frontend(struct dvb_frontend *fe) if (reg[2] < 4) p->hierarchy = fe_hi[reg[2]]; + state->priority = reg[5]; + p->code_rate_HP = (reg[6] < 6) ? fe_code[reg[6]] : FEC_NONE; p->code_rate_LP = (reg[7] < 6) ? fe_code[reg[7]] : FEC_NONE; @@ -972,5 +1043,5 @@ static struct dvb_frontend_ops it913x_fe_ofdm_ops = { MODULE_DESCRIPTION("it913x Frontend and it9137 tuner"); MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); -MODULE_VERSION("1.13"); +MODULE_VERSION("1.15"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb/frontends/it913x-fe.h index c4a908e354e0..07fa4594c12b 100644 --- a/drivers/media/dvb/frontends/it913x-fe.h +++ b/drivers/media/dvb/frontends/it913x-fe.h @@ -34,6 +34,8 @@ struct ite_config { u8 tuner_id_1; u8 dual_mode; u8 adf; + /* option to read SIGNAL_LEVEL */ + u8 read_slevel; }; #if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \ @@ -168,6 +170,8 @@ static inline struct dvb_frontend *it913x_fe_attach( #define EST_SIGNAL_LEVEL 0x004a #define FREE_BAND 0x004b #define SUSPEND_FLAG 0x004c +#define VAR_P_INBAND 0x00f7 + /* Build in tuner types */ #define IT9137 0x38 #define IT9135_38 0x38 diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index c990d35a13dc..e046622df0e4 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -104,8 +104,8 @@ static int i2c_write_demod_bytes (struct lgdt330x_state* state, * then reads the data returned for (len) bytes. */ -static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, - enum I2C_REG reg, u8* buf, int len) +static int i2c_read_demod_bytes(struct lgdt330x_state *state, + enum I2C_REG reg, u8 *buf, int len) { u8 wr [] = { reg }; struct i2c_msg msg [] = { @@ -118,6 +118,8 @@ static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __func__, state->config->demod_address, reg, ret); + if (ret >= 0) + ret = -EIO; } else { ret = 0; } diff --git a/drivers/media/dvb/frontends/m88rs2000.c b/drivers/media/dvb/frontends/m88rs2000.c new file mode 100644 index 000000000000..045ee5a6f7ae --- /dev/null +++ b/drivers/media/dvb/frontends/m88rs2000.c @@ -0,0 +1,904 @@ +/* + Driver for M88RS2000 demodulator and tuner + + Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com) + Beta Driver + + Include various calculation code from DS3000 driver. + Copyright (C) 2009 Konstantin Dimitrov. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/types.h> + + +#include "dvb_frontend.h" +#include "m88rs2000.h" + +struct m88rs2000_state { + struct i2c_adapter *i2c; + const struct m88rs2000_config *config; + struct dvb_frontend frontend; + u8 no_lock_count; + u32 tuner_frequency; + u32 symbol_rate; + fe_code_rate_t fec_inner; + u8 tuner_level; + int errmode; +}; + +static int m88rs2000_debug; + +module_param_named(debug, m88rs2000_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); + +#define dprintk(level, args...) do { \ + if (level & m88rs2000_debug) \ + printk(KERN_DEBUG "m88rs2000-fe: " args); \ +} while (0) + +#define deb_info(args...) dprintk(0x01, args) +#define info(format, arg...) \ + printk(KERN_INFO "m88rs2000-fe: " format "\n" , ## arg) + +static int m88rs2000_writereg(struct m88rs2000_state *state, u8 tuner, + u8 reg, u8 data) +{ + int ret; + u8 addr = (tuner == 0) ? state->config->tuner_addr : + state->config->demod_addr; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = addr, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int m88rs2000_demod_write(struct m88rs2000_state *state, u8 reg, u8 data) +{ + return m88rs2000_writereg(state, 1, reg, data); +} + +static int m88rs2000_tuner_write(struct m88rs2000_state *state, u8 reg, u8 data) +{ + m88rs2000_demod_write(state, 0x81, 0x84); + udelay(10); + return m88rs2000_writereg(state, 0, reg, data); + +} + +static int m88rs2000_write(struct dvb_frontend *fe, const u8 buf[], int len) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return m88rs2000_writereg(state, 1, buf[0], buf[1]); +} + +static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 tuner, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + u8 addr = (tuner == 0) ? state->config->tuner_addr : + state->config->demod_addr; + struct i2c_msg msg[] = { + { + .addr = addr, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + deb_info("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static u8 m88rs2000_demod_read(struct m88rs2000_state *state, u8 reg) +{ + return m88rs2000_readreg(state, 1, reg); +} + +static u8 m88rs2000_tuner_read(struct m88rs2000_state *state, u8 reg) +{ + m88rs2000_demod_write(state, 0x81, 0x85); + udelay(10); + return m88rs2000_readreg(state, 0, reg); +} + +static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + u32 temp; + u8 b[3]; + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + temp = srate / 1000; + temp *= 11831; + temp /= 68; + temp -= 3; + + b[0] = (u8) (temp >> 16) & 0xff; + b[1] = (u8) (temp >> 8) & 0xff; + b[2] = (u8) temp & 0xff; + ret = m88rs2000_demod_write(state, 0x93, b[2]); + ret |= m88rs2000_demod_write(state, 0x94, b[1]); + ret |= m88rs2000_demod_write(state, 0x95, b[0]); + + deb_info("m88rs2000: m88rs2000_set_symbolrate\n"); + return ret; +} + +static int m88rs2000_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + int i; + u8 reg; + deb_info("%s\n", __func__); + m88rs2000_demod_write(state, 0x9a, 0x30); + reg = m88rs2000_demod_read(state, 0xb2); + reg &= 0x3f; + m88rs2000_demod_write(state, 0xb2, reg); + for (i = 0; i < m->msg_len; i++) + m88rs2000_demod_write(state, 0xb3 + i, m->msg[i]); + + reg = m88rs2000_demod_read(state, 0xb1); + reg &= 0x87; + reg |= ((m->msg_len - 1) << 3) | 0x07; + reg &= 0x7f; + m88rs2000_demod_write(state, 0xb1, reg); + + for (i = 0; i < 15; i++) { + if ((m88rs2000_demod_read(state, 0xb1) & 0x40) == 0x0) + break; + msleep(20); + } + + reg = m88rs2000_demod_read(state, 0xb1); + if ((reg & 0x40) > 0x0) { + reg &= 0x7f; + reg |= 0x40; + m88rs2000_demod_write(state, 0xb1, reg); + } + + reg = m88rs2000_demod_read(state, 0xb2); + reg &= 0x3f; + reg |= 0x80; + m88rs2000_demod_write(state, 0xb2, reg); + m88rs2000_demod_write(state, 0x9a, 0xb0); + + + return 0; +} + +static int m88rs2000_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg0, reg1; + deb_info("%s\n", __func__); + m88rs2000_demod_write(state, 0x9a, 0x30); + msleep(50); + reg0 = m88rs2000_demod_read(state, 0xb1); + reg1 = m88rs2000_demod_read(state, 0xb2); + /* TODO complete this section */ + m88rs2000_demod_write(state, 0xb2, reg1); + m88rs2000_demod_write(state, 0xb1, reg0); + m88rs2000_demod_write(state, 0x9a, 0xb0); + + return 0; +} + +static int m88rs2000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg0, reg1; + m88rs2000_demod_write(state, 0x9a, 0x30); + reg0 = m88rs2000_demod_read(state, 0xb1); + reg1 = m88rs2000_demod_read(state, 0xb2); + + reg1 &= 0x3f; + + switch (tone) { + case SEC_TONE_ON: + reg0 |= 0x4; + reg0 &= 0xbc; + break; + case SEC_TONE_OFF: + reg1 |= 0x80; + break; + default: + break; + } + m88rs2000_demod_write(state, 0xb2, reg1); + m88rs2000_demod_write(state, 0xb1, reg0); + m88rs2000_demod_write(state, 0x9a, 0xb0); + return 0; +} + +struct inittab { + u8 cmd; + u8 reg; + u8 val; +}; + +struct inittab m88rs2000_setup[] = { + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0x00, 0x01}, + {WRITE_DELAY, 0x19, 0x00}, + {DEMOD_WRITE, 0x00, 0x00}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {DEMOD_WRITE, 0x81, 0xc1}, + {TUNER_WRITE, 0x42, 0x73}, + {TUNER_WRITE, 0x05, 0x07}, + {TUNER_WRITE, 0x20, 0x27}, + {TUNER_WRITE, 0x07, 0x02}, + {TUNER_WRITE, 0x11, 0xff}, + {TUNER_WRITE, 0x60, 0xf9}, + {TUNER_WRITE, 0x08, 0x01}, + {TUNER_WRITE, 0x00, 0x41}, + {DEMOD_WRITE, 0x81, 0x81}, + {DEMOD_WRITE, 0x86, 0xc6}, + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0xf0, 0x22}, + {DEMOD_WRITE, 0xf1, 0xbf}, + {DEMOD_WRITE, 0xb0, 0x45}, + {DEMOD_WRITE, 0xb2, 0x01}, /* set voltage pin always set 1*/ + {DEMOD_WRITE, 0x9a, 0xb0}, + {0xff, 0xaa, 0xff} +}; + +struct inittab m88rs2000_shutdown[] = { + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0xb0, 0x00}, + {DEMOD_WRITE, 0xf1, 0x89}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {TUNER_WRITE, 0x00, 0x40}, + {DEMOD_WRITE, 0x81, 0x81}, + {0xff, 0xaa, 0xff} +}; + +struct inittab tuner_reset[] = { + {TUNER_WRITE, 0x42, 0x73}, + {TUNER_WRITE, 0x05, 0x07}, + {TUNER_WRITE, 0x20, 0x27}, + {TUNER_WRITE, 0x07, 0x02}, + {TUNER_WRITE, 0x11, 0xff}, + {TUNER_WRITE, 0x60, 0xf9}, + {TUNER_WRITE, 0x08, 0x01}, + {TUNER_WRITE, 0x00, 0x41}, + {0xff, 0xaa, 0xff} +}; + +struct inittab fe_reset[] = { + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0xf1, 0xbf}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x20, 0x81}, + {DEMOD_WRITE, 0x21, 0x80}, + {DEMOD_WRITE, 0x10, 0x33}, + {DEMOD_WRITE, 0x11, 0x44}, + {DEMOD_WRITE, 0x12, 0x07}, + {DEMOD_WRITE, 0x18, 0x20}, + {DEMOD_WRITE, 0x28, 0x04}, + {DEMOD_WRITE, 0x29, 0x8e}, + {DEMOD_WRITE, 0x3b, 0xff}, + {DEMOD_WRITE, 0x32, 0x10}, + {DEMOD_WRITE, 0x33, 0x02}, + {DEMOD_WRITE, 0x34, 0x30}, + {DEMOD_WRITE, 0x35, 0xff}, + {DEMOD_WRITE, 0x38, 0x50}, + {DEMOD_WRITE, 0x39, 0x68}, + {DEMOD_WRITE, 0x3c, 0x7f}, + {DEMOD_WRITE, 0x3d, 0x0f}, + {DEMOD_WRITE, 0x45, 0x20}, + {DEMOD_WRITE, 0x46, 0x24}, + {DEMOD_WRITE, 0x47, 0x7c}, + {DEMOD_WRITE, 0x48, 0x16}, + {DEMOD_WRITE, 0x49, 0x04}, + {DEMOD_WRITE, 0x4a, 0x01}, + {DEMOD_WRITE, 0x4b, 0x78}, + {DEMOD_WRITE, 0X4d, 0xd2}, + {DEMOD_WRITE, 0x4e, 0x6d}, + {DEMOD_WRITE, 0x50, 0x30}, + {DEMOD_WRITE, 0x51, 0x30}, + {DEMOD_WRITE, 0x54, 0x7b}, + {DEMOD_WRITE, 0x56, 0x09}, + {DEMOD_WRITE, 0x58, 0x59}, + {DEMOD_WRITE, 0x59, 0x37}, + {DEMOD_WRITE, 0x63, 0xfa}, + {0xff, 0xaa, 0xff} +}; + +struct inittab fe_trigger[] = { + {DEMOD_WRITE, 0x97, 0x04}, + {DEMOD_WRITE, 0x99, 0x77}, + {DEMOD_WRITE, 0x9b, 0x64}, + {DEMOD_WRITE, 0x9e, 0x00}, + {DEMOD_WRITE, 0x9f, 0xf8}, + {DEMOD_WRITE, 0xa0, 0x20}, + {DEMOD_WRITE, 0xa1, 0xe0}, + {DEMOD_WRITE, 0xa3, 0x38}, + {DEMOD_WRITE, 0x98, 0xff}, + {DEMOD_WRITE, 0xc0, 0x0f}, + {DEMOD_WRITE, 0x89, 0x01}, + {DEMOD_WRITE, 0x00, 0x00}, + {WRITE_DELAY, 0x0a, 0x00}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x00, 0x00}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {0xff, 0xaa, 0xff} +}; + +static int m88rs2000_tab_set(struct m88rs2000_state *state, + struct inittab *tab) +{ + int ret = 0; + u8 i; + if (tab == NULL) + return -EINVAL; + + for (i = 0; i < 255; i++) { + switch (tab[i].cmd) { + case 0x01: + ret = m88rs2000_demod_write(state, tab[i].reg, + tab[i].val); + break; + case 0x02: + ret = m88rs2000_tuner_write(state, tab[i].reg, + tab[i].val); + break; + case 0x10: + if (tab[i].reg > 0) + mdelay(tab[i].reg); + break; + case 0xff: + if (tab[i].reg == 0xaa && tab[i].val == 0xff) + return 0; + case 0x00: + break; + default: + return -EINVAL; + } + if (ret < 0) + return -ENODEV; + } + return 0; +} + +static int m88rs2000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + deb_info("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + return 0; +} + +static int m88rs2000_startup(struct m88rs2000_state *state) +{ + int ret = 0; + u8 reg; + + reg = m88rs2000_tuner_read(state, 0x00); + if ((reg & 0x40) == 0) + ret = -ENODEV; + + return ret; +} + +static int m88rs2000_init(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + + deb_info("m88rs2000: init chip\n"); + /* Setup frontend from shutdown/cold */ + ret = m88rs2000_tab_set(state, m88rs2000_setup); + + return ret; +} + +static int m88rs2000_sleep(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + /* Shutdown the frondend */ + ret = m88rs2000_tab_set(state, m88rs2000_shutdown); + return ret; +} + +static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg = m88rs2000_demod_read(state, 0x8c); + + *status = 0; + + if ((reg & 0x7) == 0x7) { + *status = FE_HAS_CARRIER | FE_HAS_SIGNAL | FE_HAS_VITERBI + | FE_HAS_LOCK; + if (state->config->set_ts_params) + state->config->set_ts_params(fe, CALL_IS_READ); + } + return 0; +} + +/* Extact code for these unknown but lmedm04 driver uses interupt callbacks */ + +static int m88rs2000_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + deb_info("m88rs2000_read_ber %d\n", *ber); + *ber = 0; + return 0; +} + +static int m88rs2000_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + *strength = 0; + return 0; +} + +static int m88rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + deb_info("m88rs2000_read_snr %d\n", *snr); + *snr = 0; + return 0; +} + +static int m88rs2000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + deb_info("m88rs2000_read_ber %d\n", *ucblocks); + *ucblocks = 0; + return 0; +} + +static int m88rs2000_tuner_gate_ctrl(struct m88rs2000_state *state, u8 offset) +{ + int ret; + ret = m88rs2000_tuner_write(state, 0x51, 0x1f - offset); + ret |= m88rs2000_tuner_write(state, 0x51, 0x1f); + ret |= m88rs2000_tuner_write(state, 0x50, offset); + ret |= m88rs2000_tuner_write(state, 0x50, 0x00); + msleep(20); + return ret; +} + +static int m88rs2000_set_tuner_rf(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int reg; + reg = m88rs2000_tuner_read(state, 0x3d); + reg &= 0x7f; + if (reg < 0x16) + reg = 0xa1; + else if (reg == 0x16) + reg = 0x99; + else + reg = 0xf9; + + m88rs2000_tuner_write(state, 0x60, reg); + reg = m88rs2000_tuner_gate_ctrl(state, 0x08); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + return reg; +} + +static int m88rs2000_set_tuner(struct dvb_frontend *fe, u16 *offset) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + u32 frequency = c->frequency; + s32 offset_khz; + s32 tmp; + u32 symbol_rate = (c->symbol_rate / 1000); + u32 f3db, gdiv28; + u16 value, ndiv, lpf_coeff; + u8 lpf_mxdiv, mlpf_max, mlpf_min, nlpf; + u8 lo = 0x01, div4 = 0x0; + + /* Reset Tuner */ + ret = m88rs2000_tab_set(state, tuner_reset); + + /* Calculate frequency divider */ + if (frequency < 1060000) { + lo |= 0x10; + div4 = 0x1; + ndiv = (frequency * 14 * 4) / FE_CRYSTAL_KHZ; + } else + ndiv = (frequency * 14 * 2) / FE_CRYSTAL_KHZ; + ndiv = ndiv + ndiv % 2; + ndiv = ndiv - 1024; + + ret = m88rs2000_tuner_write(state, 0x10, 0x80 | lo); + + /* Set frequency divider */ + ret |= m88rs2000_tuner_write(state, 0x01, (ndiv >> 8) & 0xf); + ret |= m88rs2000_tuner_write(state, 0x02, ndiv & 0xff); + + ret |= m88rs2000_tuner_write(state, 0x03, 0x06); + ret |= m88rs2000_tuner_gate_ctrl(state, 0x10); + if (ret < 0) + return -ENODEV; + + /* Tuner Frequency Range */ + ret = m88rs2000_tuner_write(state, 0x10, lo); + + ret |= m88rs2000_tuner_gate_ctrl(state, 0x08); + + /* Tuner RF */ + ret |= m88rs2000_set_tuner_rf(fe); + + gdiv28 = (FE_CRYSTAL_KHZ / 1000 * 1694 + 500) / 1000; + ret |= m88rs2000_tuner_write(state, 0x04, gdiv28 & 0xff); + ret |= m88rs2000_tuner_gate_ctrl(state, 0x04); + if (ret < 0) + return -ENODEV; + + value = m88rs2000_tuner_read(state, 0x26); + + f3db = (symbol_rate * 135) / 200 + 2000; + f3db += FREQ_OFFSET_LOW_SYM_RATE; + if (f3db < 7000) + f3db = 7000; + if (f3db > 40000) + f3db = 40000; + + gdiv28 = gdiv28 * 207 / (value * 2 + 151); + mlpf_max = gdiv28 * 135 / 100; + mlpf_min = gdiv28 * 78 / 100; + if (mlpf_max > 63) + mlpf_max = 63; + + lpf_coeff = 2766; + + nlpf = (f3db * gdiv28 * 2 / lpf_coeff / + (FE_CRYSTAL_KHZ / 1000) + 1) / 2; + if (nlpf > 23) + nlpf = 23; + if (nlpf < 1) + nlpf = 1; + + lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + + if (lpf_mxdiv < mlpf_min) { + nlpf++; + lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + } + + if (lpf_mxdiv > mlpf_max) + lpf_mxdiv = mlpf_max; + + ret = m88rs2000_tuner_write(state, 0x04, lpf_mxdiv); + ret |= m88rs2000_tuner_write(state, 0x06, nlpf); + + ret |= m88rs2000_tuner_gate_ctrl(state, 0x04); + + ret |= m88rs2000_tuner_gate_ctrl(state, 0x01); + + msleep(80); + /* calculate offset assuming 96000kHz*/ + offset_khz = (ndiv - ndiv % 2 + 1024) * FE_CRYSTAL_KHZ + / 14 / (div4 + 1) / 2; + + offset_khz -= frequency; + + tmp = offset_khz; + tmp *= 65536; + + tmp = (2 * tmp + 96000) / (2 * 96000); + if (tmp < 0) + tmp += 65536; + + *offset = tmp & 0xffff; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret < 0) ? -EINVAL : 0; +} + +static int m88rs2000_set_fec(struct m88rs2000_state *state, + fe_code_rate_t fec) +{ + int ret; + u16 fec_set; + switch (fec) { + /* This is not confirmed kept for reference */ +/* case FEC_1_2: + fec_set = 0x88; + break; + case FEC_2_3: + fec_set = 0x68; + break; + case FEC_3_4: + fec_set = 0x48; + break; + case FEC_5_6: + fec_set = 0x28; + break; + case FEC_7_8: + fec_set = 0x18; + break; */ + case FEC_AUTO: + default: + fec_set = 0x08; + } + ret = m88rs2000_demod_write(state, 0x76, fec_set); + + return 0; +} + + +static fe_code_rate_t m88rs2000_get_fec(struct m88rs2000_state *state) +{ + u8 reg; + m88rs2000_demod_write(state, 0x9a, 0x30); + reg = m88rs2000_demod_read(state, 0x76); + m88rs2000_demod_write(state, 0x9a, 0xb0); + + switch (reg) { + case 0x88: + return FEC_1_2; + case 0x68: + return FEC_2_3; + case 0x48: + return FEC_3_4; + case 0x28: + return FEC_5_6; + case 0x18: + return FEC_7_8; + case 0x08: + default: + break; + } + + return FEC_AUTO; +} + +static int m88rs2000_set_frontend(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + fe_status_t status; + int i, ret; + u16 offset = 0; + u8 reg; + + state->no_lock_count = 0; + + if (c->delivery_system != SYS_DVBS) { + deb_info("%s: unsupported delivery " + "system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + /* Set Tuner */ + ret = m88rs2000_set_tuner(fe, &offset); + if (ret < 0) + return -ENODEV; + + ret = m88rs2000_demod_write(state, 0x9a, 0x30); + /* Unknown usually 0xc6 sometimes 0xc1 */ + reg = m88rs2000_demod_read(state, 0x86); + ret |= m88rs2000_demod_write(state, 0x86, reg); + /* Offset lower nibble always 0 */ + ret |= m88rs2000_demod_write(state, 0x9c, (offset >> 8)); + ret |= m88rs2000_demod_write(state, 0x9d, offset & 0xf0); + + + /* Reset Demod */ + ret = m88rs2000_tab_set(state, fe_reset); + if (ret < 0) + return -ENODEV; + + /* Unknown */ + reg = m88rs2000_demod_read(state, 0x70); + ret = m88rs2000_demod_write(state, 0x70, reg); + + /* Set FEC */ + ret |= m88rs2000_set_fec(state, c->fec_inner); + ret |= m88rs2000_demod_write(state, 0x85, 0x1); + ret |= m88rs2000_demod_write(state, 0x8a, 0xbf); + ret |= m88rs2000_demod_write(state, 0x8d, 0x1e); + ret |= m88rs2000_demod_write(state, 0x90, 0xf1); + ret |= m88rs2000_demod_write(state, 0x91, 0x08); + + if (ret < 0) + return -ENODEV; + + /* Set Symbol Rate */ + ret = m88rs2000_set_symbolrate(fe, c->symbol_rate); + if (ret < 0) + return -ENODEV; + + /* Set up Demod */ + ret = m88rs2000_tab_set(state, fe_trigger); + if (ret < 0) + return -ENODEV; + + for (i = 0; i < 25; i++) { + u8 reg = m88rs2000_demod_read(state, 0x8c); + if ((reg & 0x7) == 0x7) { + status = FE_HAS_LOCK; + break; + } + state->no_lock_count++; + if (state->no_lock_count > 15) { + reg = m88rs2000_demod_read(state, 0x70); + reg ^= 0x4; + m88rs2000_demod_write(state, 0x70, reg); + state->no_lock_count = 0; + } + if (state->no_lock_count == 20) + m88rs2000_set_tuner_rf(fe); + msleep(20); + } + + if (status & FE_HAS_LOCK) { + state->fec_inner = m88rs2000_get_fec(state); + /* Uknown suspect SNR level */ + reg = m88rs2000_demod_read(state, 0x65); + } + + state->tuner_frequency = c->frequency; + state->symbol_rate = c->symbol_rate; + return 0; +} + +static int m88rs2000_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct m88rs2000_state *state = fe->demodulator_priv; + c->fec_inner = state->fec_inner; + c->frequency = state->tuner_frequency; + c->symbol_rate = state->symbol_rate; + return 0; +} + +static int m88rs2000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + if (enable) + m88rs2000_demod_write(state, 0x81, 0x84); + else + m88rs2000_demod_write(state, 0x81, 0x81); + udelay(10); + return 0; +} + +static void m88rs2000_release(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops m88rs2000_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "M88RS2000 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = m88rs2000_release, + .init = m88rs2000_init, + .sleep = m88rs2000_sleep, + .write = m88rs2000_write, + .i2c_gate_ctrl = m88rs2000_i2c_gate_ctrl, + .read_status = m88rs2000_read_status, + .read_ber = m88rs2000_read_ber, + .read_signal_strength = m88rs2000_read_signal_strength, + .read_snr = m88rs2000_read_snr, + .read_ucblocks = m88rs2000_read_ucblocks, + .diseqc_send_master_cmd = m88rs2000_send_diseqc_msg, + .diseqc_send_burst = m88rs2000_send_diseqc_burst, + .set_tone = m88rs2000_set_tone, + .set_voltage = m88rs2000_set_voltage, + + .set_frontend = m88rs2000_set_frontend, + .get_frontend = m88rs2000_get_frontend, +}; + +struct dvb_frontend *m88rs2000_attach(const struct m88rs2000_config *config, + struct i2c_adapter *i2c) +{ + struct m88rs2000_state *state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct m88rs2000_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->tuner_frequency = 0; + state->symbol_rate = 0; + state->fec_inner = 0; + + if (m88rs2000_startup(state) < 0) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &m88rs2000_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(m88rs2000_attach); + +MODULE_DESCRIPTION("M88RS2000 DVB-S Demodulator driver"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.13"); + diff --git a/drivers/media/dvb/frontends/m88rs2000.h b/drivers/media/dvb/frontends/m88rs2000.h new file mode 100644 index 000000000000..59acdb696873 --- /dev/null +++ b/drivers/media/dvb/frontends/m88rs2000.h @@ -0,0 +1,66 @@ +/* + Driver for M88RS2000 demodulator + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef M88RS2000_H +#define M88RS2000_H + +#include <linux/dvb/frontend.h> +#include "dvb_frontend.h" + +struct m88rs2000_config { + /* Demodulator i2c address */ + u8 demod_addr; + /* Tuner address */ + u8 tuner_addr; + + u8 *inittab; + + /* minimum delay before retuning */ + int min_delay_ms; + + int (*set_ts_params)(struct dvb_frontend *, int); +}; + +enum { + CALL_IS_SET_FRONTEND = 0x0, + CALL_IS_READ, +}; + +#if defined(CONFIG_DVB_M88RS2000) || (defined(CONFIG_DVB_M88RS2000_MODULE) && \ + defined(MODULE)) +extern struct dvb_frontend *m88rs2000_attach( + const struct m88rs2000_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *m88rs2000_attach( + const struct m88rs2000_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_M88RS2000 */ + +#define FE_CRYSTAL_KHZ 27000 +#define FREQ_OFFSET_LOW_SYM_RATE 3000 + +enum { + DEMOD_WRITE = 0x1, + TUNER_WRITE, + WRITE_DELAY = 0x10, +}; +#endif /* M88RS2000_H */ diff --git a/drivers/media/dvb/frontends/rtl2830.c b/drivers/media/dvb/frontends/rtl2830.c new file mode 100644 index 000000000000..45196c5b0736 --- /dev/null +++ b/drivers/media/dvb/frontends/rtl2830.c @@ -0,0 +1,562 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +/* + * Driver implements own I2C-adapter for tuner I2C access. That's since chip + * have unusual I2C-gate control which closes gate automatically after each + * I2C transfer. Using own I2C adapter we can workaround that. + */ + +#include "rtl2830_priv.h" + +int rtl2830_debug; +module_param_named(debug, rtl2830_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +/* write multiple hardware registers */ +static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[1+len]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1+len, + .buf = buf, + } + }; + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple hardware registers */ +static int rtl2830_rd(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = priv->cfg.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + } + }; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* write multiple registers */ +static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len) +{ + int ret; + u8 reg2 = (reg >> 0) & 0xff; + u8 page = (reg >> 8) & 0xff; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2830_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; + } + + return rtl2830_wr(priv, reg2, val, len); +} + +/* read multiple registers */ +static int rtl2830_rd_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len) +{ + int ret; + u8 reg2 = (reg >> 0) & 0xff; + u8 page = (reg >> 8) & 0xff; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2830_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; + } + + return rtl2830_rd(priv, reg2, val, len); +} + +#if 0 /* currently not used */ +/* write single register */ +static int rtl2830_wr_reg(struct rtl2830_priv *priv, u16 reg, u8 val) +{ + return rtl2830_wr_regs(priv, reg, &val, 1); +} +#endif + +/* read single register */ +static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val) +{ + return rtl2830_rd_regs(priv, reg, val, 1); +} + +/* write single register with mask */ +int rtl2830_wr_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 val, u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = rtl2830_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return rtl2830_wr_regs(priv, reg, &val, 1); +} + +/* read single register with mask */ +int rtl2830_rd_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 *val, u8 mask) +{ + int ret, i; + u8 tmp; + + ret = rtl2830_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + tmp &= mask; + + /* find position of the first bit */ + for (i = 0; i < 8; i++) { + if ((mask >> i) & 0x01) + break; + } + *val = tmp >> i; + + return 0; +} + +static int rtl2830_init(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret, i; + u64 num; + u8 buf[3], tmp; + u32 if_ctl; + struct rtl2830_reg_val_mask tab[] = { + { 0x00d, 0x01, 0x03 }, + { 0x00d, 0x10, 0x10 }, + { 0x104, 0x00, 0x1e }, + { 0x105, 0x80, 0x80 }, + { 0x110, 0x02, 0x03 }, + { 0x110, 0x08, 0x0c }, + { 0x17b, 0x00, 0x40 }, + { 0x17d, 0x05, 0x0f }, + { 0x17d, 0x50, 0xf0 }, + { 0x18c, 0x08, 0x0f }, + { 0x18d, 0x00, 0xc0 }, + { 0x188, 0x05, 0x0f }, + { 0x189, 0x00, 0xfc }, + { 0x2d5, 0x02, 0x02 }, + { 0x2f1, 0x02, 0x06 }, + { 0x2f1, 0x20, 0xf8 }, + { 0x16d, 0x00, 0x01 }, + { 0x1a6, 0x00, 0x80 }, + { 0x106, priv->cfg.vtop, 0x3f }, + { 0x107, priv->cfg.krf, 0x3f }, + { 0x112, 0x28, 0xff }, + { 0x103, priv->cfg.agc_targ_val, 0xff }, + { 0x00a, 0x02, 0x07 }, + { 0x140, 0x0c, 0x3c }, + { 0x140, 0x40, 0xc0 }, + { 0x15b, 0x05, 0x07 }, + { 0x15b, 0x28, 0x38 }, + { 0x15c, 0x05, 0x07 }, + { 0x15c, 0x28, 0x38 }, + { 0x115, priv->cfg.spec_inv, 0x01 }, + { 0x16f, 0x01, 0x07 }, + { 0x170, 0x18, 0x38 }, + { 0x172, 0x0f, 0x0f }, + { 0x173, 0x08, 0x38 }, + { 0x175, 0x01, 0x07 }, + { 0x176, 0x00, 0xc0 }, + }; + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = rtl2830_wr_reg_mask(priv, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret) + goto err; + } + + ret = rtl2830_wr_regs(priv, 0x18f, "\x28\x00", 2); + if (ret) + goto err; + + ret = rtl2830_wr_regs(priv, 0x195, + "\x04\x06\x0a\x12\x0a\x12\x1e\x28", 8); + if (ret) + goto err; + + num = priv->cfg.if_dvbt % priv->cfg.xtal; + num *= 0x400000; + num = div_u64(num, priv->cfg.xtal); + num = -num; + if_ctl = num & 0x3fffff; + dbg("%s: if_ctl=%08x", __func__, if_ctl); + + ret = rtl2830_rd_reg_mask(priv, 0x119, &tmp, 0xc0); /* b[7:6] */ + if (ret) + goto err; + + buf[0] = tmp << 6; + buf[0] = (if_ctl >> 16) & 0x3f; + buf[1] = (if_ctl >> 8) & 0xff; + buf[2] = (if_ctl >> 0) & 0xff; + + ret = rtl2830_wr_regs(priv, 0x119, buf, 3); + if (ret) + goto err; + + /* TODO: spec init */ + + /* soft reset */ + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x04, 0x04); + if (ret) + goto err; + + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x00, 0x04); + if (ret) + goto err; + + priv->sleeping = false; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int rtl2830_sleep(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + priv->sleeping = true; + return 0; +} + +int rtl2830_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 500; + s->step_size = fe->ops.info.frequency_stepsize * 2; + s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; + + return 0; +} + +static int rtl2830_set_frontend(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i; + static u8 bw_params1[3][34] = { + { + 0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41, + 0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a, + 0x1f, 0x47, 0x1f, 0x7c, 0x00, 0x30, 0x01, 0x4b, 0x02, 0x82, + 0x03, 0x73, 0x03, 0xcf, /* 6 MHz */ + }, { + 0x1f, 0xfa, 0x1f, 0xda, 0x1f, 0xc1, 0x1f, 0xb3, 0x1f, 0xca, + 0x00, 0x07, 0x00, 0x4d, 0x00, 0x6d, 0x00, 0x40, 0x1f, 0xca, + 0x1f, 0x4d, 0x1f, 0x2a, 0x1f, 0xb2, 0x00, 0xec, 0x02, 0x7e, + 0x03, 0xd0, 0x04, 0x53, /* 7 MHz */ + }, { + 0x00, 0x10, 0x00, 0x0e, 0x1f, 0xf7, 0x1f, 0xc9, 0x1f, 0xa0, + 0x1f, 0xa6, 0x1f, 0xec, 0x00, 0x4e, 0x00, 0x7d, 0x00, 0x3a, + 0x1f, 0x98, 0x1f, 0x10, 0x1f, 0x40, 0x00, 0x75, 0x02, 0x5f, + 0x04, 0x24, 0x04, 0xdb, /* 8 MHz */ + }, + }; + static u8 bw_params2[3][6] = { + {0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30,}, /* 6 MHz */ + {0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98,}, /* 7 MHz */ + {0xae, 0xba, 0xf3, 0x26, 0x66, 0x64,}, /* 8 MHz */ + }; + + + dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__, + c->frequency, c->bandwidth_hz, c->inversion); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + switch (c->bandwidth_hz) { + case 6000000: + i = 0; + break; + case 7000000: + i = 1; + break; + case 8000000: + i = 2; + break; + default: + dbg("invalid bandwidth"); + return -EINVAL; + } + + ret = rtl2830_wr_reg_mask(priv, 0x008, i << 1, 0x06); + if (ret) + goto err; + + /* 1/2 split I2C write */ + ret = rtl2830_wr_regs(priv, 0x11c, &bw_params1[i][0], 17); + if (ret) + goto err; + + /* 2/2 split I2C write */ + ret = rtl2830_wr_regs(priv, 0x12d, &bw_params1[i][17], 17); + if (ret) + goto err; + + ret = rtl2830_wr_regs(priv, 0x19d, bw_params2[i], 6); + if (ret) + goto err; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int rtl2830_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret; + u8 tmp; + *status = 0; + + if (priv->sleeping) + return 0; + + ret = rtl2830_rd_reg_mask(priv, 0x351, &tmp, 0x78); /* [6:3] */ + if (ret) + goto err; + + if (tmp == 11) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } else if (tmp == 10) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI; + } + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int rtl2830_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + *snr = 0; + return 0; +} + +static int rtl2830_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + return 0; +} + +static int rtl2830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int rtl2830_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + *strength = 0; + return 0; +} + +static struct dvb_frontend_ops rtl2830_ops; + +static u32 rtl2830_tuner_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int rtl2830_tuner_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct rtl2830_priv *priv = i2c_get_adapdata(i2c_adap); + int ret; + + /* open i2c-gate */ + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x08, 0x08); + if (ret) + goto err; + + ret = i2c_transfer(priv->i2c, msg, num); + if (ret < 0) + warn("tuner i2c failed=%d", ret); + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static struct i2c_algorithm rtl2830_tuner_i2c_algo = { + .master_xfer = rtl2830_tuner_i2c_xfer, + .functionality = rtl2830_tuner_i2c_func, +}; + +struct i2c_adapter *rtl2830_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + return &priv->tuner_i2c_adapter; +} +EXPORT_SYMBOL(rtl2830_get_tuner_i2c_adapter); + +static void rtl2830_release(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + + i2c_del_adapter(&priv->tuner_i2c_adapter); + kfree(priv); +} + +struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg, + struct i2c_adapter *i2c) +{ + struct rtl2830_priv *priv = NULL; + int ret = 0; + u8 tmp; + + /* allocate memory for the internal state */ + priv = kzalloc(sizeof(struct rtl2830_priv), GFP_KERNEL); + if (priv == NULL) + goto err; + + /* setup the priv */ + priv->i2c = i2c; + memcpy(&priv->cfg, cfg, sizeof(struct rtl2830_config)); + + /* check if the demod is there */ + ret = rtl2830_rd_reg(priv, 0x000, &tmp); + if (ret) + goto err; + + /* create dvb_frontend */ + memcpy(&priv->fe.ops, &rtl2830_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; + + /* create tuner i2c adapter */ + strlcpy(priv->tuner_i2c_adapter.name, "RTL2830 tuner I2C adapter", + sizeof(priv->tuner_i2c_adapter.name)); + priv->tuner_i2c_adapter.algo = &rtl2830_tuner_i2c_algo; + priv->tuner_i2c_adapter.algo_data = NULL; + i2c_set_adapdata(&priv->tuner_i2c_adapter, priv); + if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) { + err("tuner I2C bus could not be initialized"); + goto err; + } + + priv->sleeping = true; + + return &priv->fe; +err: + dbg("%s: failed=%d", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(rtl2830_attach); + +static struct dvb_frontend_ops rtl2830_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Realtek RTL2830 (DVB-T)", + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = rtl2830_release, + + .init = rtl2830_init, + .sleep = rtl2830_sleep, + + .get_tune_settings = rtl2830_get_tune_settings, + + .set_frontend = rtl2830_set_frontend, + + .read_status = rtl2830_read_status, + .read_snr = rtl2830_read_snr, + .read_ber = rtl2830_read_ber, + .read_ucblocks = rtl2830_read_ucblocks, + .read_signal_strength = rtl2830_read_signal_strength, +}; + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/rtl2830.h b/drivers/media/dvb/frontends/rtl2830.h new file mode 100644 index 000000000000..1c6ee91749c2 --- /dev/null +++ b/drivers/media/dvb/frontends/rtl2830.h @@ -0,0 +1,97 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2830_H +#define RTL2830_H + +#include <linux/dvb/frontend.h> + +struct rtl2830_config { + /* + * Demodulator I2C address. + */ + u8 i2c_addr; + + /* + * Xtal frequency. + * Hz + * 4000000, 16000000, 25000000, 28800000 + */ + u32 xtal; + + /* + * TS output mode. + */ + u8 ts_mode; + + /* + * Spectrum inversion. + */ + bool spec_inv; + + /* + * IFs for all used modes. + * Hz + * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000 + */ + u32 if_dvbt; + + /* + */ + u8 vtop; + + /* + */ + u8 krf; + + /* + */ + u8 agc_targ_val; +}; + +#if defined(CONFIG_DVB_RTL2830) || \ + (defined(CONFIG_DVB_RTL2830_MODULE) && defined(MODULE)) +extern struct dvb_frontend *rtl2830_attach( + const struct rtl2830_config *config, + struct i2c_adapter *i2c +); + +extern struct i2c_adapter *rtl2830_get_tuner_i2c_adapter( + struct dvb_frontend *fe +); +#else +static inline struct dvb_frontend *rtl2830_attach( + const struct rtl2830_config *config, + struct i2c_adapter *i2c +) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *rtl2830_get_tuner_i2c_adapter( + struct dvb_frontend *fe +) +{ + return NULL; +} +#endif + +#endif /* RTL2830_H */ diff --git a/drivers/media/dvb/frontends/rtl2830_priv.h b/drivers/media/dvb/frontends/rtl2830_priv.h new file mode 100644 index 000000000000..4a464761b5b8 --- /dev/null +++ b/drivers/media/dvb/frontends/rtl2830_priv.h @@ -0,0 +1,57 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2830_PRIV_H +#define RTL2830_PRIV_H + +#include "dvb_frontend.h" +#include "rtl2830.h" + +#define LOG_PREFIX "rtl2830" + +#undef dbg +#define dbg(f, arg...) \ + if (rtl2830_debug) \ + printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) +#undef err +#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) +#undef info +#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) +#undef warn +#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) + +struct rtl2830_priv { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct rtl2830_config cfg; + struct i2c_adapter tuner_i2c_adapter; + + bool sleeping; + + u8 page; /* active register page */ +}; + +struct rtl2830_reg_val_mask { + u16 reg; + u8 val; + u8 mask; +}; + +#endif /* RTL2830_PRIV_H */ diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c index 38565beafe23..dd08f4ac64a8 100644 --- a/drivers/media/dvb/frontends/stb0899_drv.c +++ b/drivers/media/dvb/frontends/stb0899_drv.c @@ -67,7 +67,7 @@ static const struct stb0899_tab stb0899_cn_tab[] = { * Crude linear extrapolation below -84.8dBm and above -8.0dBm. */ static const struct stb0899_tab stb0899_dvbsrf_tab[] = { - { -950, -128 }, + { -750, -128 }, { -748, -94 }, { -745, -92 }, { -735, -90 }, @@ -131,7 +131,7 @@ static const struct stb0899_tab stb0899_dvbs2rf_tab[] = { { -730, 13645 }, { -750, 13909 }, { -766, 14153 }, - { -999, 16383 } + { -950, 16383 } }; /* DVB-S2 Es/N0 quant in dB/100 vs read value * 100*/ @@ -964,6 +964,7 @@ static int stb0899_read_signal_strength(struct dvb_frontend *fe, u16 *strength) int val; u32 reg; + *strength = 0; switch (state->delsys) { case SYS_DVBS: case SYS_DSS: @@ -983,11 +984,11 @@ static int stb0899_read_signal_strength(struct dvb_frontend *fe, u16 *strength) break; case SYS_DVBS2: if (internal->lock) { - reg = STB0899_READ_S2REG(STB0899_DEMOD, IF_AGC_GAIN); + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_GAIN); val = STB0899_GETFIELD(IF_AGC_GAIN, reg); *strength = stb0899_table_lookup(stb0899_dvbs2rf_tab, ARRAY_SIZE(stb0899_dvbs2rf_tab) - 1, val); - *strength += 750; + *strength += 950; dprintk(state->verbose, FE_DEBUG, 1, "IF_AGC_GAIN = 0x%04x, C = %d * 0.1 dBm", val & 0x3fff, *strength); } @@ -1009,6 +1010,7 @@ static int stb0899_read_snr(struct dvb_frontend *fe, u16 *snr) u8 buf[2]; u32 reg; + *snr = 0; reg = stb0899_read_reg(state, STB0899_VSTATUS); switch (state->delsys) { case SYS_DVBS: @@ -1071,7 +1073,7 @@ static int stb0899_read_status(struct dvb_frontend *fe, enum fe_status *status) reg = stb0899_read_reg(state, STB0899_VSTATUS); if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) { dprintk(state->verbose, FE_DEBUG, 1, "--------> FE_HAS_CARRIER | FE_HAS_LOCK"); - *status |= FE_HAS_CARRIER | FE_HAS_LOCK; + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; reg = stb0899_read_reg(state, STB0899_PLPARM); if (STB0899_GETFIELD(VITCURPUN, reg)) { diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c index fb5548a82208..632b25156e4c 100644 --- a/drivers/media/dvb/frontends/stv0288.c +++ b/drivers/media/dvb/frontends/stv0288.c @@ -506,7 +506,7 @@ static int stv0288_set_frontend(struct dvb_frontend *fe) tda[1] = (unsigned char)tm; stv0288_writeregI(state, 0x2b, tda[1]); stv0288_writeregI(state, 0x2c, tda[2]); - udelay(30); + msleep(30); } state->tuner_frequency = c->frequency; state->fec_inner = FEC_AUTO; diff --git a/drivers/media/dvb/frontends/tda10071.c b/drivers/media/dvb/frontends/tda10071.c index a99205026751..c21bc92d2811 100644 --- a/drivers/media/dvb/frontends/tda10071.c +++ b/drivers/media/dvb/frontends/tda10071.c @@ -1215,7 +1215,7 @@ error: EXPORT_SYMBOL(tda10071_attach); static struct dvb_frontend_ops tda10071_ops = { - .delsys = { SYS_DVBT, SYS_DVBT2 }, + .delsys = { SYS_DVBS, SYS_DVBS2 }, .info = { .name = "NXP TDA10071", .frequency_min = 950000, diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c index 8418c02bcefe..7539a5d71029 100644 --- a/drivers/media/dvb/ngene/ngene-cards.c +++ b/drivers/media/dvb/ngene/ngene-cards.c @@ -216,6 +216,7 @@ static int demod_attach_drxk(struct ngene_channel *chan, struct drxk_config config; memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; config.adr = 0x29 + (chan->number ^ 2); chan->fe = dvb_attach(drxk_attach, &config, i2c); diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c index b81df5fafe26..15b35c4725f1 100644 --- a/drivers/media/dvb/pt1/pt1.c +++ b/drivers/media/dvb/pt1/pt1.c @@ -28,6 +28,7 @@ #include <linux/pci.h> #include <linux/kthread.h> #include <linux/freezer.h> +#include <linux/ratelimit.h> #include "dvbdev.h" #include "dvb_demux.h" @@ -77,6 +78,8 @@ struct pt1 { struct pt1_adapter *adaps[PT1_NR_ADAPS]; struct pt1_table *tables; struct task_struct *kthread; + int table_index; + int buf_index; struct mutex lock; int power; @@ -90,12 +93,12 @@ struct pt1_adapter { u8 *buf; int upacket_count; int packet_count; + int st_count; struct dvb_adapter adap; struct dvb_demux demux; int users; struct dmxdev dmxdev; - struct dvb_net net; struct dvb_frontend *fe; int (*orig_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); @@ -119,7 +122,7 @@ static u32 pt1_read_reg(struct pt1 *pt1, int reg) return readl(pt1->regs + reg * 4); } -static int pt1_nr_tables = 64; +static int pt1_nr_tables = 8; module_param_named(nr_tables, pt1_nr_tables, int, 0); static void pt1_increment_table_count(struct pt1 *pt1) @@ -264,6 +267,7 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) struct pt1_adapter *adap; int offset; u8 *buf; + int sc; if (!page->upackets[PT1_NR_UPACKETS - 1]) return 0; @@ -280,6 +284,16 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) else if (!adap->upacket_count) continue; + if (upacket >> 24 & 1) + printk_ratelimited(KERN_INFO "earth-pt1: device " + "buffer overflowing. table[%d] buf[%d]\n", + pt1->table_index, pt1->buf_index); + sc = upacket >> 26 & 0x7; + if (adap->st_count != -1 && sc != ((adap->st_count + 1) & 0x7)) + printk_ratelimited(KERN_INFO "earth-pt1: data loss" + " in streamID(adapter)[%d]\n", index); + adap->st_count = sc; + buf = adap->buf; offset = adap->packet_count * 188 + adap->upacket_count * 3; buf[offset] = upacket >> 16; @@ -303,30 +317,25 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) static int pt1_thread(void *data) { struct pt1 *pt1; - int table_index; - int buf_index; struct pt1_buffer_page *page; pt1 = data; set_freezable(); - table_index = 0; - buf_index = 0; - while (!kthread_should_stop()) { try_to_freeze(); - page = pt1->tables[table_index].bufs[buf_index].page; + page = pt1->tables[pt1->table_index].bufs[pt1->buf_index].page; if (!pt1_filter(pt1, page)) { schedule_timeout_interruptible((HZ + 999) / 1000); continue; } - if (++buf_index >= PT1_NR_BUFS) { + if (++pt1->buf_index >= PT1_NR_BUFS) { pt1_increment_table_count(pt1); - buf_index = 0; - if (++table_index >= pt1_nr_tables) - table_index = 0; + pt1->buf_index = 0; + if (++pt1->table_index >= pt1_nr_tables) + pt1->table_index = 0; } } @@ -477,21 +486,60 @@ err: return ret; } +static int pt1_start_polling(struct pt1 *pt1) +{ + int ret = 0; + + mutex_lock(&pt1->lock); + if (!pt1->kthread) { + pt1->kthread = kthread_run(pt1_thread, pt1, "earth-pt1"); + if (IS_ERR(pt1->kthread)) { + ret = PTR_ERR(pt1->kthread); + pt1->kthread = NULL; + } + } + mutex_unlock(&pt1->lock); + return ret; +} + static int pt1_start_feed(struct dvb_demux_feed *feed) { struct pt1_adapter *adap; adap = container_of(feed->demux, struct pt1_adapter, demux); - if (!adap->users++) + if (!adap->users++) { + int ret; + + ret = pt1_start_polling(adap->pt1); + if (ret) + return ret; pt1_set_stream(adap->pt1, adap->index, 1); + } return 0; } +static void pt1_stop_polling(struct pt1 *pt1) +{ + int i, count; + + mutex_lock(&pt1->lock); + for (i = 0, count = 0; i < PT1_NR_ADAPS; i++) + count += pt1->adaps[i]->users; + + if (count == 0 && pt1->kthread) { + kthread_stop(pt1->kthread); + pt1->kthread = NULL; + } + mutex_unlock(&pt1->lock); +} + static int pt1_stop_feed(struct dvb_demux_feed *feed) { struct pt1_adapter *adap; adap = container_of(feed->demux, struct pt1_adapter, demux); - if (!--adap->users) + if (!--adap->users) { pt1_set_stream(adap->pt1, adap->index, 0); + pt1_stop_polling(adap->pt1); + } return 0; } @@ -575,7 +623,6 @@ static int pt1_wakeup(struct dvb_frontend *fe) static void pt1_free_adapter(struct pt1_adapter *adap) { - dvb_net_release(&adap->net); adap->demux.dmx.close(&adap->demux.dmx); dvb_dmxdev_release(&adap->dmxdev); dvb_dmx_release(&adap->demux); @@ -616,6 +663,7 @@ pt1_alloc_adapter(struct pt1 *pt1) adap->buf = buf; adap->upacket_count = 0; adap->packet_count = 0; + adap->st_count = -1; dvb_adap = &adap->adap; dvb_adap->priv = adap; @@ -644,8 +692,6 @@ pt1_alloc_adapter(struct pt1 *pt1) if (ret < 0) goto err_dmx_release; - dvb_net_init(dvb_adap, &adap->net, &demux->dmx); - return adap; err_dmx_release: @@ -1020,7 +1066,8 @@ static void __devexit pt1_remove(struct pci_dev *pdev) pt1 = pci_get_drvdata(pdev); regs = pt1->regs; - kthread_stop(pt1->kthread); + if (pt1->kthread) + kthread_stop(pt1->kthread); pt1_cleanup_tables(pt1); pt1_cleanup_frontends(pt1); pt1_disable_ram(pt1); @@ -1043,7 +1090,6 @@ pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *regs; struct pt1 *pt1; struct i2c_adapter *i2c_adap; - struct task_struct *kthread; ret = pci_enable_device(pdev); if (ret < 0) @@ -1139,17 +1185,8 @@ pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret < 0) goto err_pt1_cleanup_frontends; - kthread = kthread_run(pt1_thread, pt1, "pt1"); - if (IS_ERR(kthread)) { - ret = PTR_ERR(kthread); - goto err_pt1_cleanup_tables; - } - - pt1->kthread = kthread; return 0; -err_pt1_cleanup_tables: - pt1_cleanup_tables(pt1); err_pt1_cleanup_frontends: pt1_cleanup_frontends(pt1); err_pt1_disable_ram: diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c index 7b42ace419d9..421cf73858d3 100644 --- a/drivers/media/media-devnode.c +++ b/drivers/media/media-devnode.c @@ -312,7 +312,7 @@ static void __exit media_devnode_exit(void) unregister_chrdev_region(media_dev_t, MEDIA_NUM_DEVICES); } -module_init(media_devnode_init) +subsys_initcall(media_devnode_init); module_exit(media_devnode_exit) MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index e954781c90bf..8db2d7f4b52a 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -43,7 +43,7 @@ config USB_DSBR config RADIO_MAXIRADIO tristate "Guillemot MAXI Radio FM 2000 radio" - depends on VIDEO_V4L2 && PCI + depends on VIDEO_V4L2 && PCI && SND ---help--- Choose Y here if you have this radio card. This card may also be found as Gemtek PCI FM. @@ -80,6 +80,16 @@ config RADIO_SI4713 To compile this driver as a module, choose M here: the module will be called radio-si4713. +config USB_KEENE + tristate "Keene FM Transmitter USB support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of FM transmitter + to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called radio-keene. + config RADIO_TEA5764 tristate "TEA5764 I2C FM radio support" depends on I2C && VIDEO_V4L2 @@ -167,6 +177,10 @@ menuconfig V4L_RADIO_ISA_DRIVERS if V4L_RADIO_ISA_DRIVERS +config RADIO_ISA + depends on ISA + tristate + config RADIO_CADET tristate "ADS Cadet AM/FM Tuner" depends on ISA && VIDEO_V4L2 @@ -174,20 +188,13 @@ config RADIO_CADET Choose Y here if you have one of these AM/FM radio cards, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - - Further documentation on this driver can be found on the WWW at - <http://linux.blackhawke.net/cadet/>. - To compile this driver as a module, choose M here: the module will be called radio-cadet. config RADIO_RTRACK tristate "AIMSlab RadioTrack (aka RadioReveal) support" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. @@ -201,11 +208,7 @@ config RADIO_RTRACK You must also pass the module a suitable io parameter, 0x248 has been reported to be used by these cards. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. More information is - contained in the file + More information is contained in the file <file:Documentation/video4linux/radiotrack.txt>. To compile this driver as a module, choose M here: the @@ -214,7 +217,7 @@ config RADIO_RTRACK config RADIO_RTRACK_PORT hex "RadioTrack i/o port (0x20f or 0x30f)" depends on RADIO_RTRACK=y - default "20f" + default "30f" help Enter either 0x30f or 0x20f here. The card default is 0x30f, if you haven't changed the jumper setting on the card. @@ -222,14 +225,14 @@ config RADIO_RTRACK_PORT config RADIO_RTRACK2 tristate "AIMSlab RadioTrack II support" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have this FM radio card, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-rtrack2. @@ -245,15 +248,11 @@ config RADIO_RTRACK2_PORT config RADIO_AZTECH tristate "Aztech/Packard Bell Radio" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-aztech. @@ -269,6 +268,7 @@ config RADIO_AZTECH_PORT config RADIO_GEMTEK tristate "GemTek Radio card (or compatible) support" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have this FM radio card, and then fill in the I/O port address and settings below. The following cards either have @@ -278,23 +278,21 @@ config RADIO_GEMTEK - Typhoon Radio card (some models) - Hama Radio card - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-gemtek. config RADIO_GEMTEK_PORT - hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" + hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" depends on RADIO_GEMTEK=y default "34c" help - Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is - 0x34c, if you haven't changed the jumper setting on the card. On - Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O + Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The + card default is 0x34c, if you haven't changed the jumper setting + on the card. + + On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O port is 0x20c, 0x248 or 0x28c. + If automatic I/O port probing is enabled this port will be used only in case of automatic probing failure, ie. as a fallback. @@ -318,11 +316,6 @@ config RADIO_MIROPCM20 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this is required for the radio-miropcm20. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-miropcm20. @@ -332,11 +325,6 @@ config RADIO_SF16FMI ---help--- Choose Y here if you have one of these FM radio cards. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-sf16fmi. @@ -346,50 +334,35 @@ config RADIO_SF16FMR2 ---help--- Choose Y here if you have one of these FM radio cards. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found on the WWW at - <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. - To compile this driver as a module, choose M here: the module will be called radio-sf16fmr2. config RADIO_TERRATEC tristate "TerraTec ActiveRadio ISA Standalone" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- - Choose Y here if you have this FM radio card, and then fill in the - port address below. (TODO) + Choose Y here if you have this FM radio card. - Note: This driver is in its early stages. Right now volume and - frequency control and muting works at least for me, but - unfortunately I have not found anybody who wants to use this card - with Linux. So if it is this what YOU are trying to do right now, - PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. - - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-terratec. -config RADIO_TERRATEC_PORT - hex "Terratec i/o port (normally 0x590)" - depends on RADIO_TERRATEC=y - default "590" - help - Fill in the I/O port of your TerraTec FM radio card. If unsure, go - with the default. - config RADIO_TRUST tristate "Trust FM radio card" depends on ISA && VIDEO_V4L2 + select RADIO_ISA help This is a driver for the Trust FM radio cards. Say Y if you have such a card and want to use it under Linux. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. + To compile this driver as a module, choose M here: the module will be called radio-trust. @@ -404,14 +377,14 @@ config RADIO_TRUST_PORT config RADIO_TYPHOON tristate "Typhoon Radio (a.k.a. EcoRadio)" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address and the frequency used for muting below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-typhoon. @@ -438,14 +411,14 @@ config RADIO_TYPHOON_MUTEFREQ config RADIO_ZOLTRIX tristate "Zoltrix Radio" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-zoltrix. diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index 390daf94d847..ca8c7d134b95 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -2,6 +2,7 @@ # Makefile for the kernel character device drivers. # +obj-$(CONFIG_RADIO_ISA) += radio-isa.o obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o @@ -20,6 +21,7 @@ obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o +obj-$(CONFIG_USB_KEENE) += radio-keene.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o obj-$(CONFIG_RADIO_TEF6862) += tef6862.o diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 1c3f8440a55c..98e0c8c20312 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -1,16 +1,13 @@ -/* radiotrack (radioreveal) driver for Linux radio support - * (c) 1997 M. Kirkwood +/* + * AimsLab RadioTrack (aka RadioVeveal) driver + * + * Copyright 1997 M. Kirkwood + * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> * - * History: - * 1999-02-24 Russell Kroll <rkroll@exploits.org> - * Fine tuning/VIDEO_TUNER_LOW - * Frequency range expanded to start at 87 MHz - * - * TODO: Allow for more than one of these foolish entities :-) - * * Notes on the hardware (reverse engineered from other peoples' * reverse engineering of AIMS' code :-) * @@ -26,6 +23,7 @@ * wait(a_wee_while); * out(port, stop_changing_the_volume); * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -34,401 +32,179 @@ #include <linux/delay.h> /* msleep */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include "radio-isa.h" -MODULE_AUTHOR("M.Kirkwood"); +MODULE_AUTHOR("M. Kirkwood"); MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("1.0.0"); #ifndef CONFIG_RADIO_RTRACK_PORT #define CONFIG_RADIO_RTRACK_PORT -1 #endif -static int io = CONFIG_RADIO_RTRACK_PORT; -static int radio_nr = -1; +#define RTRACK_MAX 2 -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20f or 0x30f)"); -module_param(radio_nr, int, 0); +static int io[RTRACK_MAX] = { [0] = CONFIG_RADIO_RTRACK_PORT, + [1 ... (RTRACK_MAX - 1)] = -1 }; +static int radio_nr[RTRACK_MAX] = { [0 ... (RTRACK_MAX - 1)] = -1 }; -struct rtrack -{ - struct v4l2_device v4l2_dev; - struct video_device vdev; - int port; +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + +struct rtrack { + struct radio_isa_card isa; int curvol; - unsigned long curfreq; - int muted; - int io; - struct mutex lock; }; -static struct rtrack rtrack_card; - -/* local things */ - -static void rt_decvol(struct rtrack *rt) -{ - outb(0x58, rt->io); /* volume down + sigstr + on */ - msleep(100); - outb(0xd8, rt->io); /* volume steady + sigstr + on */ -} - -static void rt_incvol(struct rtrack *rt) -{ - outb(0x98, rt->io); /* volume up + sigstr + on */ - msleep(100); - outb(0xd8, rt->io); /* volume steady + sigstr + on */ -} - -static void rt_mute(struct rtrack *rt) -{ - rt->muted = 1; - mutex_lock(&rt->lock); - outb(0xd0, rt->io); /* volume steady, off */ - mutex_unlock(&rt->lock); -} - -static int rt_setvol(struct rtrack *rt, int vol) +static struct radio_isa_card *rtrack_alloc(void) { - int i; - - mutex_lock(&rt->lock); - - if (vol == rt->curvol) { /* requested volume = current */ - if (rt->muted) { /* user is unmuting the card */ - rt->muted = 0; - outb(0xd8, rt->io); /* enable card */ - } - mutex_unlock(&rt->lock); - return 0; - } - - if (vol == 0) { /* volume = 0 means mute the card */ - outb(0x48, rt->io); /* volume down but still "on" */ - msleep(2000); /* make sure it's totally down */ - outb(0xd0, rt->io); /* volume steady, off */ - rt->curvol = 0; /* track the volume state! */ - mutex_unlock(&rt->lock); - return 0; - } + struct rtrack *rt = kzalloc(sizeof(struct rtrack), GFP_KERNEL); - rt->muted = 0; - if (vol > rt->curvol) - for (i = rt->curvol; i < vol; i++) - rt_incvol(rt); - else - for (i = rt->curvol; i > vol; i--) - rt_decvol(rt); - - rt->curvol = vol; - mutex_unlock(&rt->lock); - return 0; + if (rt) + rt->curvol = 0xff; + return rt ? &rt->isa : NULL; } -/* the 128+64 on these outb's is to keep the volume stable while tuning - * without them, the volume _will_ creep up with each frequency change - * and bit 4 (+16) is to keep the signal strength meter enabled +/* The 128+64 on these outb's is to keep the volume stable while tuning. + * Without them, the volume _will_ creep up with each frequency change + * and bit 4 (+16) is to keep the signal strength meter enabled. */ -static void send_0_byte(struct rtrack *rt) +static void send_0_byte(struct radio_isa_card *isa, int on) { - if (rt->curvol == 0 || rt->muted) { - outb_p(128+64+16+ 1, rt->io); /* wr-enable + data low */ - outb_p(128+64+16+2+1, rt->io); /* clock */ - } - else { - outb_p(128+64+16+8+ 1, rt->io); /* on + wr-enable + data low */ - outb_p(128+64+16+8+2+1, rt->io); /* clock */ - } + outb_p(128+64+16+on+1, isa->io); /* wr-enable + data low */ + outb_p(128+64+16+on+2+1, isa->io); /* clock */ msleep(1); } -static void send_1_byte(struct rtrack *rt) +static void send_1_byte(struct radio_isa_card *isa, int on) { - if (rt->curvol == 0 || rt->muted) { - outb_p(128+64+16+4 +1, rt->io); /* wr-enable+data high */ - outb_p(128+64+16+4+2+1, rt->io); /* clock */ - } - else { - outb_p(128+64+16+8+4 +1, rt->io); /* on+wr-enable+data high */ - outb_p(128+64+16+8+4+2+1, rt->io); /* clock */ - } - + outb_p(128+64+16+on+4+1, isa->io); /* wr-enable+data high */ + outb_p(128+64+16+on+4+2+1, isa->io); /* clock */ msleep(1); } -static int rt_setfreq(struct rtrack *rt, unsigned long freq) +static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq) { + int on = v4l2_ctrl_g_ctrl(isa->mute) ? 0 : 8; int i; - mutex_lock(&rt->lock); /* Stop other ops interfering */ - - rt->curfreq = freq; - - /* now uses VIDEO_TUNER_LOW for fine tuning */ - freq += 171200; /* Add 10.7 MHz IF */ freq /= 800; /* Convert to 50 kHz units */ - send_0_byte(rt); /* 0: LSB of frequency */ + send_0_byte(isa, on); /* 0: LSB of frequency */ for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ if (freq & (1 << i)) - send_1_byte(rt); + send_1_byte(isa, on); else - send_0_byte(rt); - - send_0_byte(rt); /* 14: test bit - always 0 */ - send_0_byte(rt); /* 15: test bit - always 0 */ - - send_0_byte(rt); /* 16: band data 0 - always 0 */ - send_0_byte(rt); /* 17: band data 1 - always 0 */ - send_0_byte(rt); /* 18: band data 2 - always 0 */ - send_0_byte(rt); /* 19: time base - always 0 */ - - send_0_byte(rt); /* 20: spacing (0 = 25 kHz) */ - send_1_byte(rt); /* 21: spacing (1 = 25 kHz) */ - send_0_byte(rt); /* 22: spacing (0 = 25 kHz) */ - send_1_byte(rt); /* 23: AM/FM (FM = 1, always) */ - - if (rt->curvol == 0 || rt->muted) - outb(0xd0, rt->io); /* volume steady + sigstr */ - else - outb(0xd8, rt->io); /* volume steady + sigstr + on */ - - mutex_unlock(&rt->lock); - - return 0; -} - -static int rt_getsigstr(struct rtrack *rt) -{ - int sig = 1; - - mutex_lock(&rt->lock); - if (inb(rt->io) & 2) /* bit set = no signal present */ - sig = 0; - mutex_unlock(&rt->lock); - return sig; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-aimslab", sizeof(v->driver)); - strlcpy(v->card, "RadioTrack", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct rtrack *rt = video_drvdata(file); + send_0_byte(isa, on); - if (v->index > 0) - return -EINVAL; + send_0_byte(isa, on); /* 14: test bit - always 0 */ + send_0_byte(isa, on); /* 15: test bit - always 0 */ - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xffff * rt_getsigstr(rt); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct rtrack *rt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - rt_setfreq(rt, f->frequency); - return 0; -} + send_0_byte(isa, on); /* 16: band data 0 - always 0 */ + send_0_byte(isa, on); /* 17: band data 1 - always 0 */ + send_0_byte(isa, on); /* 18: band data 2 - always 0 */ + send_0_byte(isa, on); /* 19: time base - always 0 */ -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct rtrack *rt = video_drvdata(file); + send_0_byte(isa, on); /* 20: spacing (0 = 25 kHz) */ + send_1_byte(isa, on); /* 21: spacing (1 = 25 kHz) */ + send_0_byte(isa, on); /* 22: spacing (0 = 25 kHz) */ + send_1_byte(isa, on); /* 23: AM/FM (FM = 1, always) */ - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = rt->curfreq; + outb(0xd0 + on, isa->io); /* volume steady + sigstr */ return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) +static u32 rtrack_g_signal(struct radio_isa_card *isa) { - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 0xff, 1, 0xff); - } - return -EINVAL; + /* bit set = no signal present */ + return 0xffff * !(inb(isa->io) & 2); } -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) +static int rtrack_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - struct rtrack *rt = video_drvdata(file); + struct rtrack *rt = container_of(isa, struct rtrack, isa); + int curvol = rt->curvol; - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = rt->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = rt->curvol; + if (mute) { + outb(0xd0, isa->io); /* volume steady + sigstr + off */ return 0; } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct rtrack *rt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - rt_mute(rt); - else - rt_setvol(rt, rt->curvol); - return 0; - case V4L2_CID_AUDIO_VOLUME: - rt_setvol(rt, ctrl->value); - return 0; + if (vol == 0) { /* volume = 0 means mute the card */ + outb(0x48, isa->io); /* volume down but still "on" */ + msleep(curvol * 3); /* make sure it's totally down */ + } else if (curvol < vol) { + outb(0x98, isa->io); /* volume up + sigstr + on */ + for (; curvol < vol; curvol++) + udelay(3000); + } else if (curvol > vol) { + outb(0x58, isa->io); /* volume down + sigstr + on */ + for (; curvol > vol; curvol--) + udelay(3000); } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; + outb(0xd8, isa->io); /* volume steady + sigstr + on */ + rt->curvol = vol; return 0; } -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) +/* Mute card - prevents noisy bootups */ +static int rtrack_initialize(struct radio_isa_card *isa) { - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; + /* this ensures that the volume is all the way up */ + outb(0x90, isa->io); /* volume up but still "on" */ + msleep(3000); /* make sure it's totally up */ + outb(0xc0, isa->io); /* steady volume, mute card */ return 0; } -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static const struct v4l2_file_operations rtrack_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops rtrack_ops = { + .alloc = rtrack_alloc, + .init = rtrack_initialize, + .s_mute_volume = rtrack_s_mute_volume, + .s_frequency = rtrack_s_frequency, + .g_signal = rtrack_g_signal, }; -static const struct v4l2_ioctl_ops rtrack_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int rtrack_ioports[] = { 0x20f, 0x30f }; + +static struct radio_isa_driver rtrack_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-aimslab", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = rtrack_ioports, + .num_of_io_ports = ARRAY_SIZE(rtrack_ioports), + .region_size = 2, + .card = "AIMSlab RadioTrack/RadioReveal", + .ops = &rtrack_ops, + .has_stereo = true, + .max_volume = 0xff, }; static int __init rtrack_init(void) { - struct rtrack *rt = &rtrack_card; - struct v4l2_device *v4l2_dev = &rt->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "rtrack", sizeof(v4l2_dev->name)); - rt->io = io; - - if (rt->io == -1) { - v4l2_err(v4l2_dev, "you must set an I/O address with io=0x20f or 0x30f\n"); - return -EINVAL; - } - - if (!request_region(rt->io, 2, "rtrack")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", rt->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(rt->io, 2); - v4l2_err(v4l2_dev, "could not register v4l2_device\n"); - return res; - } - - strlcpy(rt->vdev.name, v4l2_dev->name, sizeof(rt->vdev.name)); - rt->vdev.v4l2_dev = v4l2_dev; - rt->vdev.fops = &rtrack_fops; - rt->vdev.ioctl_ops = &rtrack_ioctl_ops; - rt->vdev.release = video_device_release_empty; - video_set_drvdata(&rt->vdev, rt); - - /* Set up the I/O locking */ - - mutex_init(&rt->lock); - - /* mute card - prevents noisy bootups */ - - /* this ensures that the volume is all the way down */ - outb(0x48, rt->io); /* volume down but still "on" */ - msleep(2000); /* make sure it's totally down */ - outb(0xc0, rt->io); /* steady volume, mute card */ - - if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(&rt->v4l2_dev); - release_region(rt->io, 2); - return -EINVAL; - } - v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n"); - - return 0; + return isa_register_driver(&rtrack_driver.driver, RTRACK_MAX); } static void __exit rtrack_exit(void) { - struct rtrack *rt = &rtrack_card; - - video_unregister_device(&rt->vdev); - v4l2_device_unregister(&rt->v4l2_dev); - release_region(rt->io, 2); + isa_unregister_driver(&rtrack_driver.driver); } module_init(rtrack_init); module_exit(rtrack_exit); - diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index eed7b0840734..177bcbd7a7c1 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -1,5 +1,7 @@ -/* radio-aztech.c - Aztech radio card driver for Linux 2.2 +/* + * radio-aztech.c - Aztech radio card driver * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@xs4all.nl> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> * Adapted to support the Video for Linux API by * Russell Kroll <rkroll@exploits.org>. Based on original tuner code by: @@ -10,19 +12,7 @@ * Scott McGrath (smcgrath@twilight.vtc.vsc.edu) * William McGrath (wmcgrath@twilight.vtc.vsc.edu) * - * The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/ - * along with more information on the card itself. - * - * History: - * 1999-02-24 Russell Kroll <rkroll@exploits.org> - * Fine tuning/VIDEO_TUNER_LOW - * Range expanded to 87-108 MHz (from 87.9-107.8) - * - * Notable changes from the original source: - * - includes stripped down to the essentials - * - for loops used as delays replaced with udelay() - * - #defines removed, changed to static values - * - tuning structure changed - no more character arrays, other changes + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -31,126 +21,72 @@ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include "radio-isa.h" MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); MODULE_DESCRIPTION("A driver for the Aztech radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("1.0.0"); /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */ - #ifndef CONFIG_RADIO_AZTECH_PORT #define CONFIG_RADIO_AZTECH_PORT -1 #endif -static int io = CONFIG_RADIO_AZTECH_PORT; -static int radio_nr = -1; -static int radio_wait_time = 1000; +#define AZTECH_MAX 2 -module_param(io, int, 0); -module_param(radio_nr, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)"); +static int io[AZTECH_MAX] = { [0] = CONFIG_RADIO_AZTECH_PORT, + [1 ... (AZTECH_MAX - 1)] = -1 }; +static int radio_nr[AZTECH_MAX] = { [0 ... (AZTECH_MAX - 1)] = -1 }; +static const int radio_wait_time = 1000; -struct aztech -{ - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Aztech card (0x350 or 0x358)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + +struct aztech { + struct radio_isa_card isa; int curvol; - unsigned long curfreq; - int stereo; - struct mutex lock; }; -static struct aztech aztech_card; - -static int volconvert(int level) -{ - level >>= 14; /* Map 16bits down to 2 bit */ - level &= 3; - - /* convert to card-friendly values */ - switch (level) { - case 0: - return 0; - case 1: - return 1; - case 2: - return 4; - case 3: - return 5; - } - return 0; /* Quieten gcc */ -} - static void send_0_byte(struct aztech *az) { udelay(radio_wait_time); - outb_p(2 + volconvert(az->curvol), az->io); - outb_p(64 + 2 + volconvert(az->curvol), az->io); + outb_p(2 + az->curvol, az->isa.io); + outb_p(64 + 2 + az->curvol, az->isa.io); } static void send_1_byte(struct aztech *az) { - udelay (radio_wait_time); - outb_p(128 + 2 + volconvert(az->curvol), az->io); - outb_p(128 + 64 + 2 + volconvert(az->curvol), az->io); -} - -static int az_setvol(struct aztech *az, int vol) -{ - mutex_lock(&az->lock); - outb(volconvert(vol), az->io); - mutex_unlock(&az->lock); - return 0; -} - -/* thanks to Michael Dwyer for giving me a dose of clues in - * the signal strength department.. - * - * This card has a stereo bit - bit 0 set = mono, not set = stereo - * It also has a "signal" bit - bit 1 set = bad signal, not set = good - * - */ - -static int az_getsigstr(struct aztech *az) -{ - int sig = 1; - - mutex_lock(&az->lock); - if (inb(az->io) & 2) /* bit set = no signal present */ - sig = 0; - mutex_unlock(&az->lock); - return sig; + udelay(radio_wait_time); + outb_p(128 + 2 + az->curvol, az->isa.io); + outb_p(128 + 64 + 2 + az->curvol, az->isa.io); } -static int az_getstereo(struct aztech *az) +static struct radio_isa_card *aztech_alloc(void) { - int stereo = 1; + struct aztech *az = kzalloc(sizeof(*az), GFP_KERNEL); - mutex_lock(&az->lock); - if (inb(az->io) & 1) /* bit set = mono */ - stereo = 0; - mutex_unlock(&az->lock); - return stereo; + return az ? &az->isa : NULL; } -static int az_setfreq(struct aztech *az, unsigned long frequency) +static int aztech_s_frequency(struct radio_isa_card *isa, u32 freq) { + struct aztech *az = container_of(isa, struct aztech, isa); int i; - mutex_lock(&az->lock); - - az->curfreq = frequency; - frequency += 171200; /* Add 10.7 MHz IF */ - frequency /= 800; /* Convert to 50 kHz units */ + freq += 171200; /* Add 10.7 MHz IF */ + freq /= 800; /* Convert to 50 kHz units */ send_0_byte(az); /* 0: LSB of frequency */ for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ - if (frequency & (1 << i)) + if (freq & (1 << i)) send_1_byte(az); else send_0_byte(az); @@ -158,7 +94,7 @@ static int az_setfreq(struct aztech *az, unsigned long frequency) send_0_byte(az); /* 14: test bit - always 0 */ send_0_byte(az); /* 15: test bit - always 0 */ send_0_byte(az); /* 16: band data 0 - always 0 */ - if (az->stereo) /* 17: stereo (1 to enable) */ + if (isa->stereo) /* 17: stereo (1 to enable) */ send_1_byte(az); else send_0_byte(az); @@ -173,225 +109,77 @@ static int az_setfreq(struct aztech *az, unsigned long frequency) /* latch frequency */ udelay(radio_wait_time); - outb_p(128 + 64 + volconvert(az->curvol), az->io); - - mutex_unlock(&az->lock); - - return 0; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-aztech", sizeof(v->driver)); - strlcpy(v->card, "Aztech Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct aztech *az = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - - v->rangelow = 87 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (az_getstereo(az)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * az_getsigstr(az); - - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} + outb_p(128 + 64 + az->curvol, az->isa.io); -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; return 0; } -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) +/* thanks to Michael Dwyer for giving me a dose of clues in + * the signal strength department.. + * + * This card has a stereo bit - bit 0 set = mono, not set = stereo + */ +static u32 aztech_g_rxsubchans(struct radio_isa_card *isa) { - return a->index ? -EINVAL : 0; + if (inb(isa->io) & 1) + return V4L2_TUNER_SUB_MONO; + return V4L2_TUNER_SUB_STEREO; } -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static int aztech_s_stereo(struct radio_isa_card *isa, bool stereo) { - struct aztech *az = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - az_setfreq(az, f->frequency); - return 0; + return aztech_s_frequency(isa, isa->freq); } -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static int aztech_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - struct aztech *az = video_drvdata(file); + struct aztech *az = container_of(isa, struct aztech, isa); - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = az->curfreq; + if (mute) + vol = 0; + az->curvol = (vol & 1) + ((vol & 2) << 1); + outb(az->curvol, isa->io); return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 0xff, 1, 0xff); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct aztech *az = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (az->curvol == 0) - ctrl->value = 1; - else - ctrl->value = 0; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = az->curvol * 6554; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct aztech *az = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - az_setvol(az, 0); - else - az_setvol(az, az->curvol); - return 0; - case V4L2_CID_AUDIO_VOLUME: - az_setvol(az, ctrl->value); - return 0; - } - return -EINVAL; -} - -static const struct v4l2_file_operations aztech_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops aztech_ops = { + .alloc = aztech_alloc, + .s_mute_volume = aztech_s_mute_volume, + .s_frequency = aztech_s_frequency, + .s_stereo = aztech_s_stereo, + .g_rxsubchans = aztech_g_rxsubchans, }; -static const struct v4l2_ioctl_ops aztech_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int aztech_ioports[] = { 0x350, 0x358 }; + +static struct radio_isa_driver aztech_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-aztech", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = aztech_ioports, + .num_of_io_ports = ARRAY_SIZE(aztech_ioports), + .region_size = 2, + .card = "Aztech Radio", + .ops = &aztech_ops, + .has_stereo = true, + .max_volume = 3, }; static int __init aztech_init(void) { - struct aztech *az = &aztech_card; - struct v4l2_device *v4l2_dev = &az->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "aztech", sizeof(v4l2_dev->name)); - az->io = io; - - if (az->io == -1) { - v4l2_err(v4l2_dev, "you must set an I/O address with io=0x350 or 0x358\n"); - return -EINVAL; - } - - if (!request_region(az->io, 2, "aztech")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", az->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(az->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - mutex_init(&az->lock); - strlcpy(az->vdev.name, v4l2_dev->name, sizeof(az->vdev.name)); - az->vdev.v4l2_dev = v4l2_dev; - az->vdev.fops = &aztech_fops; - az->vdev.ioctl_ops = &aztech_ioctl_ops; - az->vdev.release = video_device_release_empty; - video_set_drvdata(&az->vdev, az); - /* mute card - prevents noisy bootups */ - outb(0, az->io); - - if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(az->io, 2); - return -EINVAL; - } - - v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n"); - return 0; + return isa_register_driver(&aztech_driver.driver, AZTECH_MAX); } static void __exit aztech_exit(void) { - struct aztech *az = &aztech_card; - - video_unregister_device(&az->vdev); - v4l2_device_unregister(&az->v4l2_dev); - release_region(az->io, 2); + isa_unregister_driver(&aztech_driver.driver); } module_init(aztech_init); diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 36ce0611c037..2e639ce6f256 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -1,4 +1,7 @@ -/* GemTek radio card driver for Linux (C) 1998 Jonas Munsin <jmunsin@iki.fi> +/* + * GemTek radio card driver + * + * Copyright 1998 Jonas Munsin <jmunsin@iki.fi> * * GemTek hasn't released any specs on the card, so the protocol had to * be reverse engineered with dosemu. @@ -11,9 +14,12 @@ * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> * - * TODO: Allow for more than one of these foolish entities :-) - * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> + * + * Note: this card seems to swap the left and right audio channels! + * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -23,8 +29,10 @@ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> +#include "radio-isa.h" /* * Module info. @@ -33,7 +41,7 @@ MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); MODULE_DESCRIPTION("A driver for the GemTek Radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.4"); +MODULE_VERSION("1.0.0"); /* * Module params. @@ -46,45 +54,29 @@ MODULE_VERSION("0.0.4"); #define CONFIG_RADIO_GEMTEK_PROBE 1 #endif -static int io = CONFIG_RADIO_GEMTEK_PORT; -static bool probe = CONFIG_RADIO_GEMTEK_PROBE; -static bool hardmute; -static bool shutdown = 1; -static bool keepmuted = 1; -static bool initmute = 1; -static int radio_nr = -1; +#define GEMTEK_MAX 4 -module_param(io, int, 0444); -MODULE_PARM_DESC(io, "Force I/O port for the GemTek Radio card if automatic " - "probing is disabled or fails. The most common I/O ports are: 0x20c " - "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to " - "work for the combined sound/radiocard)."); +static bool probe = CONFIG_RADIO_GEMTEK_PROBE; +static bool hardmute; +static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT, + [1 ... (GEMTEK_MAX - 1)] = -1 }; +static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 }; module_param(probe, bool, 0444); -MODULE_PARM_DESC(probe, "Enable automatic device probing. Note: only the most " - "common I/O ports used by the card are probed."); +MODULE_PARM_DESC(probe, "Enable automatic device probing."); module_param(hardmute, bool, 0644); -MODULE_PARM_DESC(hardmute, "Enable `hard muting' by shutting down PLL, may " +MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may " "reduce static noise."); -module_param(shutdown, bool, 0644); -MODULE_PARM_DESC(shutdown, "Enable shutting down PLL and muting line when " - "module is unloaded."); - -module_param(keepmuted, bool, 0644); -MODULE_PARM_DESC(keepmuted, "Keep card muted even when frequency is changed."); - -module_param(initmute, bool, 0444); -MODULE_PARM_DESC(initmute, "Mute card when module is loaded."); - -module_param(radio_nr, int, 0444); +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic " + "probing is disabled or fails. The most common I/O ports are: 0x20c " + "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to " + "work for the combined sound/radiocard)."); -/* - * Functions for controlling the card. - */ -#define GEMTEK_LOWFREQ (87*16000) -#define GEMTEK_HIGHFREQ (108*16000) +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); /* * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal @@ -108,18 +100,11 @@ module_param(radio_nr, int, 0444); #define LONG_DELAY 75 /* usec */ struct gemtek { - struct v4l2_device v4l2_dev; - struct video_device vdev; - struct mutex lock; - unsigned long lastfreq; - int muted; - int verified; - int io; + struct radio_isa_card isa; + bool muted; u32 bu2614data; }; -static struct gemtek gemtek_card; - #define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */ #define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */ #define BU2614_VOID_BITS 4 /* unused */ @@ -166,31 +151,24 @@ static struct gemtek gemtek_card; */ static void gemtek_bu2614_transmit(struct gemtek *gt) { + struct radio_isa_card *isa = >->isa; int i, bit, q, mute; - mutex_lock(>->lock); - mute = gt->muted ? GEMTEK_MT : 0x00; - outb_p(mute | GEMTEK_DA | GEMTEK_CK, gt->io); - udelay(SHORT_DELAY); - outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, gt->io); + outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io); udelay(LONG_DELAY); for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) { bit = (q & 1) ? GEMTEK_DA : 0; - outb_p(mute | GEMTEK_CE | bit, gt->io); + outb_p(mute | GEMTEK_CE | bit, isa->io); udelay(SHORT_DELAY); - outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, gt->io); + outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io); udelay(SHORT_DELAY); } - outb_p(mute | GEMTEK_DA | GEMTEK_CK, gt->io); + outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io); udelay(SHORT_DELAY); - outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, gt->io); - udelay(LONG_DELAY); - - mutex_unlock(>->lock); } /* @@ -198,21 +176,27 @@ static void gemtek_bu2614_transmit(struct gemtek *gt) */ static unsigned long gemtek_convfreq(unsigned long freq) { - return ((freq<<FSCALE) + IF_OFFSET + REF_FREQ/2) / REF_FREQ; + return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ; +} + +static struct radio_isa_card *gemtek_alloc(void) +{ + struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL); + + if (gt) + gt->muted = true; + return gt ? >->isa : NULL; } /* * Set FM-frequency. */ -static void gemtek_setfreq(struct gemtek *gt, unsigned long freq) +static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq) { - if (keepmuted && hardmute && gt->muted) - return; + struct gemtek *gt = container_of(isa, struct gemtek, isa); - freq = clamp_val(freq, GEMTEK_LOWFREQ, GEMTEK_HIGHFREQ); - - gt->lastfreq = freq; - gt->muted = 0; + if (hardmute && gt->muted) + return 0; gemtek_bu2614_set(gt, BU2614_PORT, 0); gemtek_bu2614_set(gt, BU2614_FMES, 0); @@ -220,23 +204,25 @@ static void gemtek_setfreq(struct gemtek *gt, unsigned long freq) gemtek_bu2614_set(gt, BU2614_SWAL, 0); gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */ gemtek_bu2614_set(gt, BU2614_TEST, 0); - gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ); gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq)); - gemtek_bu2614_transmit(gt); + return 0; } /* * Set mute flag. */ -static void gemtek_mute(struct gemtek *gt) +static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { + struct gemtek *gt = container_of(isa, struct gemtek, isa); int i; - gt->muted = 1; - + gt->muted = mute; if (hardmute) { + if (!mute) + return gemtek_s_frequency(isa, isa->freq); + /* Turn off PLL, disable data output */ gemtek_bu2614_set(gt, BU2614_PORT, 0); gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */ @@ -247,367 +233,85 @@ static void gemtek_mute(struct gemtek *gt) gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF); gemtek_bu2614_set(gt, BU2614_FREQ, 0); gemtek_bu2614_transmit(gt); - return; + return 0; } - mutex_lock(>->lock); - /* Read bus contents (CE, CK and DA). */ - i = inb_p(gt->io); + i = inb_p(isa->io); /* Write it back with mute flag set. */ - outb_p((i >> 5) | GEMTEK_MT, gt->io); + outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io); udelay(SHORT_DELAY); - - mutex_unlock(>->lock); -} - -/* - * Unset mute flag. - */ -static void gemtek_unmute(struct gemtek *gt) -{ - int i; - - gt->muted = 0; - if (hardmute) { - /* Turn PLL back on. */ - gemtek_setfreq(gt, gt->lastfreq); - return; - } - mutex_lock(>->lock); - - i = inb_p(gt->io); - outb_p(i >> 5, gt->io); - udelay(SHORT_DELAY); - - mutex_unlock(>->lock); + return 0; } -/* - * Get signal strength (= stereo status). - */ -static inline int gemtek_getsigstr(struct gemtek *gt) +static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa) { - int sig; - - mutex_lock(>->lock); - sig = inb_p(gt->io) & GEMTEK_NS ? 0 : 1; - mutex_unlock(>->lock); - return sig; + if (inb_p(isa->io) & GEMTEK_NS) + return V4L2_TUNER_SUB_MONO; + return V4L2_TUNER_SUB_STEREO; } /* * Check if requested card acts like GemTek Radio card. */ -static int gemtek_verify(struct gemtek *gt, int port) +static bool gemtek_probe(struct radio_isa_card *isa, int io) { int i, q; - if (gt->verified == port) - return 1; - - mutex_lock(>->lock); - - q = inb_p(port); /* Read bus contents before probing. */ + q = inb_p(io); /* Read bus contents before probing. */ /* Try to turn on CE, CK and DA respectively and check if card responds properly. */ for (i = 0; i < 3; ++i) { - outb_p(1 << i, port); + outb_p(1 << i, io); udelay(SHORT_DELAY); - if ((inb_p(port) & (~GEMTEK_NS)) != (0x17 | (1 << (i + 5)))) { - mutex_unlock(>->lock); - return 0; - } + if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5)))) + return false; } - outb_p(q >> 5, port); /* Write bus contents back. */ + outb_p(q >> 5, io); /* Write bus contents back. */ udelay(SHORT_DELAY); - - mutex_unlock(>->lock); - gt->verified = port; - - return 1; -} - -/* - * Automatic probing for card. - */ -static int gemtek_probe(struct gemtek *gt) -{ - struct v4l2_device *v4l2_dev = >->v4l2_dev; - int ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; - int i; - - if (!probe) { - v4l2_info(v4l2_dev, "Automatic device probing disabled.\n"); - return -1; - } - - v4l2_info(v4l2_dev, "Automatic device probing enabled.\n"); - - for (i = 0; i < ARRAY_SIZE(ioports); ++i) { - v4l2_info(v4l2_dev, "Trying I/O port 0x%x...\n", ioports[i]); - - if (!request_region(ioports[i], 1, "gemtek-probe")) { - v4l2_warn(v4l2_dev, "I/O port 0x%x busy!\n", - ioports[i]); - continue; - } - - if (gemtek_verify(gt, ioports[i])) { - v4l2_info(v4l2_dev, "Card found from I/O port " - "0x%x!\n", ioports[i]); - - release_region(ioports[i], 1); - gt->io = ioports[i]; - return gt->io; - } - - release_region(ioports[i], 1); - } - - v4l2_err(v4l2_dev, "Automatic probing failed!\n"); - return -1; + return true; } -/* - * Video 4 Linux stuff. - */ - -static const struct v4l2_file_operations gemtek_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops gemtek_ops = { + .alloc = gemtek_alloc, + .probe = gemtek_probe, + .s_mute_volume = gemtek_s_mute_volume, + .s_frequency = gemtek_s_frequency, + .g_rxsubchans = gemtek_g_rxsubchans, }; -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-gemtek", sizeof(v->driver)); - strlcpy(v->card, "GemTek", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) -{ - struct gemtek *gt = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = GEMTEK_LOWFREQ; - v->rangehigh = GEMTEK_HIGHFREQ; - v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; - v->signal = 0xffff * gemtek_getsigstr(gt); - if (v->signal) { - v->audmode = V4L2_TUNER_MODE_STEREO; - v->rxsubchans = V4L2_TUNER_SUB_STEREO; - } else { - v->audmode = V4L2_TUNER_MODE_MONO; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - } - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) -{ - return (v->index != 0) ? -EINVAL : 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek *gt = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = gt->lastfreq; - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek *gt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - gemtek_setfreq(gt, f->frequency); - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); - default: - return -EINVAL; - } -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek *gt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = gt->muted; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek *gt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - gemtek_mute(gt); - else - gemtek_unmute(gt); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return (i != 0) ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) -{ - return (a->index != 0) ? -EINVAL : 0; -} - -static const struct v4l2_ioctl_ops gemtek_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl +static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; + +static struct radio_isa_driver gemtek_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-gemtek", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = gemtek_ioports, + .num_of_io_ports = ARRAY_SIZE(gemtek_ioports), + .region_size = 1, + .card = "GemTek Radio", + .ops = &gemtek_ops, + .has_stereo = true, }; -/* - * Initialization / cleanup related stuff. - */ - static int __init gemtek_init(void) { - struct gemtek *gt = &gemtek_card; - struct v4l2_device *v4l2_dev = >->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "gemtek", sizeof(v4l2_dev->name)); - - v4l2_info(v4l2_dev, "GemTek Radio card driver: v0.0.3\n"); - - mutex_init(>->lock); - - gt->verified = -1; - gt->io = io; - gemtek_probe(gt); - if (gt->io) { - if (!request_region(gt->io, 1, "gemtek")) { - v4l2_err(v4l2_dev, "I/O port 0x%x already in use.\n", gt->io); - return -EBUSY; - } - - if (!gemtek_verify(gt, gt->io)) - v4l2_warn(v4l2_dev, "Card at I/O port 0x%x does not " - "respond properly, check your " - "configuration.\n", gt->io); - else - v4l2_info(v4l2_dev, "Using I/O port 0x%x.\n", gt->io); - } else if (probe) { - v4l2_err(v4l2_dev, "Automatic probing failed and no " - "fixed I/O port defined.\n"); - return -ENODEV; - } else { - v4l2_err(v4l2_dev, "Automatic probing disabled but no fixed " - "I/O port defined."); - return -EINVAL; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - release_region(gt->io, 1); - return res; - } - - strlcpy(gt->vdev.name, v4l2_dev->name, sizeof(gt->vdev.name)); - gt->vdev.v4l2_dev = v4l2_dev; - gt->vdev.fops = &gemtek_fops; - gt->vdev.ioctl_ops = &gemtek_ioctl_ops; - gt->vdev.release = video_device_release_empty; - video_set_drvdata(>->vdev, gt); - - /* Set defaults */ - gt->lastfreq = GEMTEK_LOWFREQ; - gt->bu2614data = 0; - - if (initmute) - gemtek_mute(gt); - - if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(gt->io, 1); - return -EBUSY; - } - - return 0; + gemtek_driver.probe = probe; + return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX); } -/* - * Module cleanup - */ static void __exit gemtek_exit(void) { - struct gemtek *gt = &gemtek_card; - struct v4l2_device *v4l2_dev = >->v4l2_dev; - - if (shutdown) { - hardmute = 1; /* Turn off PLL */ - gemtek_mute(gt); - } else { - v4l2_info(v4l2_dev, "Module unloaded but card not muted!\n"); - } - - video_unregister_device(>->vdev); - v4l2_device_unregister(>->v4l2_dev); - release_region(gt->io, 1); + hardmute = 1; /* Turn off PLL */ + isa_unregister_driver(&gemtek_driver.driver); } module_init(gemtek_init); diff --git a/drivers/media/radio/radio-isa.c b/drivers/media/radio/radio-isa.c new file mode 100644 index 000000000000..06f906351fad --- /dev/null +++ b/drivers/media/radio/radio-isa.c @@ -0,0 +1,340 @@ +/* + * Framework for ISA radio drivers. + * This takes care of all the V4L2 scaffolding, allowing the ISA drivers + * to concentrate on the actual hardware operation. + * + * Copyright (C) 2012 Hans Verkuil <hans.verkuil@cisco.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/videodev2.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> + +#include "radio-isa.h" + +MODULE_AUTHOR("Hans Verkuil"); +MODULE_DESCRIPTION("A framework for ISA radio drivers."); +MODULE_LICENSE("GPL"); + +#define FREQ_LOW (87U * 16000U) +#define FREQ_HIGH (108U * 16000U) + +static int radio_isa_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + struct radio_isa_card *isa = video_drvdata(file); + + strlcpy(v->driver, isa->drv->driver.driver.name, sizeof(v->driver)); + strlcpy(v->card, isa->drv->card, sizeof(v->card)); + snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", isa->v4l2_dev.name); + + v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + v->device_caps = v->capabilities | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int radio_isa_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct radio_isa_card *isa = video_drvdata(file); + const struct radio_isa_ops *ops = isa->drv->ops; + + if (v->index > 0) + return -EINVAL; + + strlcpy(v->name, "FM", sizeof(v->name)); + v->type = V4L2_TUNER_RADIO; + v->rangelow = FREQ_LOW; + v->rangehigh = FREQ_HIGH; + v->capability = V4L2_TUNER_CAP_LOW; + if (isa->drv->has_stereo) + v->capability |= V4L2_TUNER_CAP_STEREO; + + if (ops->g_rxsubchans) + v->rxsubchans = ops->g_rxsubchans(isa); + else + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + v->audmode = isa->stereo ? V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO; + if (ops->g_signal) + v->signal = ops->g_signal(isa); + else + v->signal = (v->rxsubchans & V4L2_TUNER_SUB_STEREO) ? + 0xffff : 0; + return 0; +} + +static int radio_isa_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct radio_isa_card *isa = video_drvdata(file); + const struct radio_isa_ops *ops = isa->drv->ops; + + if (v->index) + return -EINVAL; + if (ops->s_stereo) { + isa->stereo = (v->audmode == V4L2_TUNER_MODE_STEREO); + return ops->s_stereo(isa, isa->stereo); + } + return 0; +} + +static int radio_isa_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct radio_isa_card *isa = video_drvdata(file); + int res; + + if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) + return -EINVAL; + f->frequency = clamp(f->frequency, FREQ_LOW, FREQ_HIGH); + res = isa->drv->ops->s_frequency(isa, f->frequency); + if (res == 0) + isa->freq = f->frequency; + return res; +} + +static int radio_isa_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct radio_isa_card *isa = video_drvdata(file); + + if (f->tuner != 0) + return -EINVAL; + f->type = V4L2_TUNER_RADIO; + f->frequency = isa->freq; + return 0; +} + +static int radio_isa_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct radio_isa_card *isa = + container_of(ctrl->handler, struct radio_isa_card, hdl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + return isa->drv->ops->s_mute_volume(isa, ctrl->val, + isa->volume ? isa->volume->val : 0); + } + return -EINVAL; +} + +static int radio_isa_log_status(struct file *file, void *priv) +{ + struct radio_isa_card *isa = video_drvdata(file); + + v4l2_info(&isa->v4l2_dev, "I/O Port = 0x%03x\n", isa->io); + v4l2_ctrl_handler_log_status(&isa->hdl, isa->v4l2_dev.name); + return 0; +} + +static int radio_isa_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + if (sub->type == V4L2_EVENT_CTRL) + return v4l2_event_subscribe(fh, sub, 0); + return -EINVAL; +} + +static const struct v4l2_ctrl_ops radio_isa_ctrl_ops = { + .s_ctrl = radio_isa_s_ctrl, +}; + +static const struct v4l2_file_operations radio_isa_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops radio_isa_ioctl_ops = { + .vidioc_querycap = radio_isa_querycap, + .vidioc_g_tuner = radio_isa_g_tuner, + .vidioc_s_tuner = radio_isa_s_tuner, + .vidioc_g_frequency = radio_isa_g_frequency, + .vidioc_s_frequency = radio_isa_s_frequency, + .vidioc_log_status = radio_isa_log_status, + .vidioc_subscribe_event = radio_isa_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +int radio_isa_match(struct device *pdev, unsigned int dev) +{ + struct radio_isa_driver *drv = pdev->platform_data; + + return drv->probe || drv->io_params[dev] >= 0; +} +EXPORT_SYMBOL_GPL(radio_isa_match); + +static bool radio_isa_valid_io(const struct radio_isa_driver *drv, int io) +{ + int i; + + for (i = 0; i < drv->num_of_io_ports; i++) + if (drv->io_ports[i] == io) + return true; + return false; +} + +int radio_isa_probe(struct device *pdev, unsigned int dev) +{ + struct radio_isa_driver *drv = pdev->platform_data; + const struct radio_isa_ops *ops = drv->ops; + struct v4l2_device *v4l2_dev; + struct radio_isa_card *isa; + int res; + + isa = drv->ops->alloc(); + if (isa == NULL) + return -ENOMEM; + dev_set_drvdata(pdev, isa); + isa->drv = drv; + isa->io = drv->io_params[dev]; + v4l2_dev = &isa->v4l2_dev; + strlcpy(v4l2_dev->name, dev_name(pdev), sizeof(v4l2_dev->name)); + + if (drv->probe && ops->probe) { + int i; + + for (i = 0; i < drv->num_of_io_ports; ++i) { + int io = drv->io_ports[i]; + + if (request_region(io, drv->region_size, v4l2_dev->name)) { + bool found = ops->probe(isa, io); + + release_region(io, drv->region_size); + if (found) { + isa->io = io; + break; + } + } + } + } + + if (!radio_isa_valid_io(drv, isa->io)) { + int i; + + if (isa->io < 0) + return -ENODEV; + v4l2_err(v4l2_dev, "you must set an I/O address with io=0x%03x", + drv->io_ports[0]); + for (i = 1; i < drv->num_of_io_ports; i++) + printk(KERN_CONT "/0x%03x", drv->io_ports[i]); + printk(KERN_CONT ".\n"); + kfree(isa); + return -EINVAL; + } + + if (!request_region(isa->io, drv->region_size, v4l2_dev->name)) { + v4l2_err(v4l2_dev, "port 0x%x already in use\n", isa->io); + kfree(isa); + return -EBUSY; + } + + res = v4l2_device_register(pdev, v4l2_dev); + if (res < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + goto err_dev_reg; + } + + v4l2_ctrl_handler_init(&isa->hdl, 1); + isa->mute = v4l2_ctrl_new_std(&isa->hdl, &radio_isa_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); + if (drv->max_volume) + isa->volume = v4l2_ctrl_new_std(&isa->hdl, &radio_isa_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, drv->max_volume, 1, + drv->max_volume); + v4l2_dev->ctrl_handler = &isa->hdl; + if (isa->hdl.error) { + res = isa->hdl.error; + v4l2_err(v4l2_dev, "Could not register controls\n"); + goto err_hdl; + } + if (drv->max_volume) + v4l2_ctrl_cluster(2, &isa->mute); + v4l2_dev->ctrl_handler = &isa->hdl; + + mutex_init(&isa->lock); + isa->vdev.lock = &isa->lock; + strlcpy(isa->vdev.name, v4l2_dev->name, sizeof(isa->vdev.name)); + isa->vdev.v4l2_dev = v4l2_dev; + isa->vdev.fops = &radio_isa_fops; + isa->vdev.ioctl_ops = &radio_isa_ioctl_ops; + isa->vdev.release = video_device_release_empty; + set_bit(V4L2_FL_USE_FH_PRIO, &isa->vdev.flags); + video_set_drvdata(&isa->vdev, isa); + isa->freq = FREQ_LOW; + isa->stereo = drv->has_stereo; + + if (ops->init) + res = ops->init(isa); + if (!res) + res = v4l2_ctrl_handler_setup(&isa->hdl); + if (!res) + res = ops->s_frequency(isa, isa->freq); + if (!res && ops->s_stereo) + res = ops->s_stereo(isa, isa->stereo); + if (res < 0) { + v4l2_err(v4l2_dev, "Could not setup card\n"); + goto err_node_reg; + } + res = video_register_device(&isa->vdev, VFL_TYPE_RADIO, + drv->radio_nr_params[dev]); + if (res < 0) { + v4l2_err(v4l2_dev, "Could not register device node\n"); + goto err_node_reg; + } + + v4l2_info(v4l2_dev, "Initialized radio card %s on port 0x%03x\n", + drv->card, isa->io); + return 0; + +err_node_reg: + v4l2_ctrl_handler_free(&isa->hdl); +err_hdl: + v4l2_device_unregister(&isa->v4l2_dev); +err_dev_reg: + release_region(isa->io, drv->region_size); + kfree(isa); + return res; +} +EXPORT_SYMBOL_GPL(radio_isa_probe); + +int radio_isa_remove(struct device *pdev, unsigned int dev) +{ + struct radio_isa_card *isa = dev_get_drvdata(pdev); + const struct radio_isa_ops *ops = isa->drv->ops; + + ops->s_mute_volume(isa, true, isa->volume ? isa->volume->cur.val : 0); + video_unregister_device(&isa->vdev); + v4l2_ctrl_handler_free(&isa->hdl); + v4l2_device_unregister(&isa->v4l2_dev); + release_region(isa->io, isa->drv->region_size); + v4l2_info(&isa->v4l2_dev, "Removed radio card %s\n", isa->drv->card); + kfree(isa); + return 0; +} +EXPORT_SYMBOL_GPL(radio_isa_remove); diff --git a/drivers/media/radio/radio-isa.h b/drivers/media/radio/radio-isa.h new file mode 100644 index 000000000000..8a0ea84d86de --- /dev/null +++ b/drivers/media/radio/radio-isa.h @@ -0,0 +1,105 @@ +/* + * Framework for ISA radio drivers. + * This takes care of all the V4L2 scaffolding, allowing the ISA drivers + * to concentrate on the actual hardware operation. + * + * Copyright (C) 2012 Hans Verkuil <hans.verkuil@cisco.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _RADIO_ISA_H_ +#define _RADIO_ISA_H_ + +#include <linux/isa.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +struct radio_isa_driver; +struct radio_isa_ops; + +/* Core structure for radio ISA cards */ +struct radio_isa_card { + const struct radio_isa_driver *drv; + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler hdl; + struct video_device vdev; + struct mutex lock; + const struct radio_isa_ops *ops; + struct { /* mute/volume cluster */ + struct v4l2_ctrl *mute; + struct v4l2_ctrl *volume; + }; + /* I/O port */ + int io; + + /* Card is in stereo audio mode */ + bool stereo; + /* Current frequency */ + u32 freq; +}; + +struct radio_isa_ops { + /* Allocate and initialize a radio_isa_card struct */ + struct radio_isa_card *(*alloc)(void); + /* Probe whether a card is present at the given port */ + bool (*probe)(struct radio_isa_card *isa, int io); + /* Special card initialization can be done here, this is called after + * the standard controls are registered, but before they are setup, + * thus allowing drivers to add their own controls here. */ + int (*init)(struct radio_isa_card *isa); + /* Set mute and volume. */ + int (*s_mute_volume)(struct radio_isa_card *isa, bool mute, int volume); + /* Set frequency */ + int (*s_frequency)(struct radio_isa_card *isa, u32 freq); + /* Set stereo/mono audio mode */ + int (*s_stereo)(struct radio_isa_card *isa, bool stereo); + /* Get rxsubchans value for VIDIOC_G_TUNER */ + u32 (*g_rxsubchans)(struct radio_isa_card *isa); + /* Get the signal strength for VIDIOC_G_TUNER */ + u32 (*g_signal)(struct radio_isa_card *isa); +}; + +/* Top level structure needed to instantiate the cards */ +struct radio_isa_driver { + struct isa_driver driver; + const struct radio_isa_ops *ops; + /* The module_param_array with the specified I/O ports */ + int *io_params; + /* The module_param_array with the radio_nr values */ + int *radio_nr_params; + /* Whether we should probe for possible cards */ + bool probe; + /* The list of possible I/O ports */ + const int *io_ports; + /* The size of that list */ + int num_of_io_ports; + /* The region size to request */ + unsigned region_size; + /* The name of the card */ + const char *card; + /* Card can capture stereo audio */ + bool has_stereo; + /* The maximum volume for the volume control. If 0, then there + is no volume control possible. */ + int max_volume; +}; + +int radio_isa_match(struct device *pdev, unsigned int dev); +int radio_isa_probe(struct device *pdev, unsigned int dev); +int radio_isa_remove(struct device *pdev, unsigned int dev); + +#endif diff --git a/drivers/media/radio/radio-keene.c b/drivers/media/radio/radio-keene.c new file mode 100644 index 000000000000..55bd1d2937c8 --- /dev/null +++ b/drivers/media/radio/radio-keene.c @@ -0,0 +1,427 @@ +/* + * Copyright (c) 2012 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* kernel includes */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <linux/usb.h> +#include <linux/version.h> +#include <linux/mutex.h> + +/* driver and module definitions */ +MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>"); +MODULE_DESCRIPTION("Keene FM Transmitter driver"); +MODULE_LICENSE("GPL"); + +/* Actually, it advertises itself as a Logitech */ +#define USB_KEENE_VENDOR 0x046d +#define USB_KEENE_PRODUCT 0x0a0e + +/* Probably USB_TIMEOUT should be modified in module parameter */ +#define BUFFER_LENGTH 8 +#define USB_TIMEOUT 500 + +/* Frequency limits in MHz */ +#define FREQ_MIN 76U +#define FREQ_MAX 108U +#define FREQ_MUL 16000U + +/* USB Device ID List */ +static struct usb_device_id usb_keene_device_table[] = { + {USB_DEVICE_AND_INTERFACE_INFO(USB_KEENE_VENDOR, USB_KEENE_PRODUCT, + USB_CLASS_HID, 0, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_keene_device_table); + +struct keene_device { + struct usb_device *usbdev; + struct usb_interface *intf; + struct video_device vdev; + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler hdl; + struct mutex lock; + + u8 *buffer; + unsigned curfreq; + u8 tx; + u8 pa; + bool stereo; + bool muted; + bool preemph_75_us; +}; + +static inline struct keene_device *to_keene_dev(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct keene_device, v4l2_dev); +} + +/* Set frequency (if non-0), PA, mute and turn on/off the FM transmitter. */ +static int keene_cmd_main(struct keene_device *radio, unsigned freq, bool play) +{ + unsigned short freq_send = freq ? (freq - 76 * 16000) / 800 : 0; + int ret; + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x50; + radio->buffer[2] = (freq_send >> 8) & 0xff; + radio->buffer[3] = freq_send & 0xff; + radio->buffer[4] = radio->pa; + /* If bit 4 is set, then tune to the frequency. + If bit 3 is set, then unmute; if bit 2 is set, then mute. + If bit 1 is set, then enter idle mode; if bit 0 is set, + then enter transit mode. + */ + radio->buffer[5] = (radio->muted ? 4 : 8) | (play ? 1 : 2) | + (freq ? 0x10 : 0); + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 9, 0x21, 0x200, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + + if (ret < 0) { + dev_warn(&radio->vdev.dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + if (freq) + radio->curfreq = freq; + return 0; +} + +/* Set TX, stereo and preemphasis mode (50 us vs 75 us). */ +static int keene_cmd_set(struct keene_device *radio) +{ + int ret; + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x51; + radio->buffer[2] = radio->tx; + /* If bit 0 is set, then transmit mono, otherwise stereo. + If bit 2 is set, then enable 75 us preemphasis, otherwise + it is 50 us. */ + radio->buffer[3] = (!radio->stereo) | (radio->preemph_75_us ? 4 : 0); + radio->buffer[4] = 0x00; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 9, 0x21, 0x200, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + + if (ret < 0) { + dev_warn(&radio->vdev.dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + return 0; +} + +/* Handle unplugging the device. + * We call video_unregister_device in any case. + * The last function called in this procedure is + * usb_keene_device_release. + */ +static void usb_keene_disconnect(struct usb_interface *intf) +{ + struct keene_device *radio = to_keene_dev(usb_get_intfdata(intf)); + + v4l2_device_get(&radio->v4l2_dev); + mutex_lock(&radio->lock); + usb_set_intfdata(intf, NULL); + video_unregister_device(&radio->vdev); + v4l2_device_disconnect(&radio->v4l2_dev); + mutex_unlock(&radio->lock); + v4l2_device_put(&radio->v4l2_dev); +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + struct keene_device *radio = video_drvdata(file); + + strlcpy(v->driver, "radio-keene", sizeof(v->driver)); + strlcpy(v->card, "Keene FM Transmitter", sizeof(v->card)); + usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info)); + v->device_caps = V4L2_CAP_RADIO | V4L2_CAP_MODULATOR; + v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int vidioc_g_modulator(struct file *file, void *priv, + struct v4l2_modulator *v) +{ + struct keene_device *radio = video_drvdata(file); + + if (v->index > 0) + return -EINVAL; + + strlcpy(v->name, "FM", sizeof(v->name)); + v->rangelow = FREQ_MIN * FREQ_MUL; + v->rangehigh = FREQ_MAX * FREQ_MUL; + v->txsubchans = radio->stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; + v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + return 0; +} + +static int vidioc_s_modulator(struct file *file, void *priv, + struct v4l2_modulator *v) +{ + struct keene_device *radio = video_drvdata(file); + + if (v->index > 0) + return -EINVAL; + + radio->stereo = (v->txsubchans == V4L2_TUNER_SUB_STEREO); + return keene_cmd_set(radio); +} + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct keene_device *radio = video_drvdata(file); + + if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) + return -EINVAL; + f->frequency = clamp(f->frequency, + FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); + return keene_cmd_main(radio, f->frequency, true); +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct keene_device *radio = video_drvdata(file); + + if (f->tuner != 0) + return -EINVAL; + f->type = V4L2_TUNER_RADIO; + f->frequency = radio->curfreq; + return 0; +} + +static int keene_s_ctrl(struct v4l2_ctrl *ctrl) +{ + static const u8 db2tx[] = { + /* -15, -12, -9, -6, -3, 0 dB */ + 0x03, 0x13, 0x02, 0x12, 0x22, 0x32, + /* 3, 6, 9, 12, 15, 18 dB */ + 0x21, 0x31, 0x20, 0x30, 0x40, 0x50 + }; + struct keene_device *radio = + container_of(ctrl->handler, struct keene_device, hdl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + radio->muted = ctrl->val; + return keene_cmd_main(radio, 0, true); + + case V4L2_CID_TUNE_POWER_LEVEL: + /* To go from dBuV to the register value we apply the + following formula: */ + radio->pa = (ctrl->val - 71) * 100 / 62; + return keene_cmd_main(radio, 0, true); + + case V4L2_CID_TUNE_PREEMPHASIS: + radio->preemph_75_us = ctrl->val == V4L2_PREEMPHASIS_75_uS; + return keene_cmd_set(radio); + + case V4L2_CID_AUDIO_COMPRESSION_GAIN: + radio->tx = db2tx[(ctrl->val - ctrl->minimum) / ctrl->step]; + return keene_cmd_set(radio); + } + return -EINVAL; +} + +static int vidioc_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_CTRL: + return v4l2_event_subscribe(fh, sub, 0); + default: + return -EINVAL; + } +} + + +/* File system interface */ +static const struct v4l2_file_operations usb_keene_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ctrl_ops keene_ctrl_ops = { + .s_ctrl = keene_s_ctrl, +}; + +static const struct v4l2_ioctl_ops usb_keene_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_modulator = vidioc_g_modulator, + .vidioc_s_modulator = vidioc_s_modulator, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = vidioc_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static void usb_keene_video_device_release(struct v4l2_device *v4l2_dev) +{ + struct keene_device *radio = to_keene_dev(v4l2_dev); + + /* free rest memory */ + v4l2_ctrl_handler_free(&radio->hdl); + kfree(radio->buffer); + kfree(radio); +} + +/* check if the device is present and register with v4l and usb if it is */ +static int usb_keene_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct keene_device *radio; + struct v4l2_ctrl_handler *hdl; + int retval = 0; + + /* + * The Keene FM transmitter USB device has the same USB ID as + * the Logitech AudioHub Speaker, but it should ignore the hid. + * Check if the name is that of the Keene device. + * If not, then someone connected the AudioHub and we shouldn't + * attempt to handle this driver. + * For reference: the product name of the AudioHub is + * "AudioHub Speaker". + */ + if (dev->product && strcmp(dev->product, "B-LINK USB Audio ")) + return -ENODEV; + + radio = kzalloc(sizeof(struct keene_device), GFP_KERNEL); + if (radio) + radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL); + + if (!radio || !radio->buffer) { + dev_err(&intf->dev, "kmalloc for keene_device failed\n"); + kfree(radio); + retval = -ENOMEM; + goto err; + } + + hdl = &radio->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_AUDIO_MUTE, + 0, 1, 1, 0); + v4l2_ctrl_new_std_menu(hdl, &keene_ctrl_ops, V4L2_CID_TUNE_PREEMPHASIS, + V4L2_PREEMPHASIS_75_uS, 1, V4L2_PREEMPHASIS_50_uS); + v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_TUNE_POWER_LEVEL, + 84, 118, 1, 118); + v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_AUDIO_COMPRESSION_GAIN, + -15, 18, 3, 0); + radio->pa = 118; + radio->tx = 0x32; + radio->stereo = true; + radio->curfreq = 95.16 * FREQ_MUL; + if (hdl->error) { + retval = hdl->error; + + v4l2_ctrl_handler_free(hdl); + goto err_v4l2; + } + retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev); + if (retval < 0) { + dev_err(&intf->dev, "couldn't register v4l2_device\n"); + goto err_v4l2; + } + + mutex_init(&radio->lock); + + radio->v4l2_dev.ctrl_handler = hdl; + radio->v4l2_dev.release = usb_keene_video_device_release; + strlcpy(radio->vdev.name, radio->v4l2_dev.name, + sizeof(radio->vdev.name)); + radio->vdev.v4l2_dev = &radio->v4l2_dev; + radio->vdev.fops = &usb_keene_fops; + radio->vdev.ioctl_ops = &usb_keene_ioctl_ops; + radio->vdev.lock = &radio->lock; + radio->vdev.release = video_device_release_empty; + + radio->usbdev = interface_to_usbdev(intf); + radio->intf = intf; + usb_set_intfdata(intf, &radio->v4l2_dev); + + video_set_drvdata(&radio->vdev, radio); + set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags); + + retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1); + if (retval < 0) { + dev_err(&intf->dev, "could not register video device\n"); + goto err_vdev; + } + v4l2_ctrl_handler_setup(hdl); + dev_info(&intf->dev, "V4L2 device registered as %s\n", + video_device_node_name(&radio->vdev)); + return 0; + +err_vdev: + v4l2_device_unregister(&radio->v4l2_dev); +err_v4l2: + kfree(radio->buffer); + kfree(radio); +err: + return retval; +} + +/* USB subsystem interface */ +static struct usb_driver usb_keene_driver = { + .name = "radio-keene", + .probe = usb_keene_probe, + .disconnect = usb_keene_disconnect, + .id_table = usb_keene_device_table, +}; + +static int __init keene_init(void) +{ + int retval = usb_register(&usb_keene_driver); + + if (retval) + pr_err(KBUILD_MODNAME + ": usb_register failed. Error number %d\n", retval); + + return retval; +} + +static void __exit keene_exit(void) +{ + usb_deregister(&usb_keene_driver); +} + +module_init(keene_init); +module_exit(keene_exit); + diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index f872a54cf3d9..740a3d5520c7 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -42,67 +42,37 @@ #include <linux/videodev2.h> #include <linux/io.h> #include <linux/slab.h> +#include <sound/tea575x-tuner.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> - -#define DRIVER_VERSION "0.7.8" - +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> MODULE_AUTHOR("Dimitromanolakis Apostolos, apdim@grecian.net"); -MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000 radio."); +MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000."); MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); +MODULE_VERSION("1.0.0"); static int radio_nr = -1; -module_param(radio_nr, int, 0); - -static int debug; - -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "activates debug info"); - -#define dprintk(dev, num, fmt, arg...) \ - v4l2_dbg(num, debug, &dev->v4l2_dev, fmt, ## arg) - -#ifndef PCI_VENDOR_ID_GUILLEMOT -#define PCI_VENDOR_ID_GUILLEMOT 0x5046 -#endif - -#ifndef PCI_DEVICE_ID_GUILLEMOT -#define PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO 0x1001 -#endif - +module_param(radio_nr, int, 0644); +MODULE_PARM_DESC(radio_nr, "Radio device number"); /* TEA5757 pin mappings */ static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16; -#define FREQ_LO (87 * 16000) -#define FREQ_HI (108 * 16000) - -#define FREQ_IF 171200 /* 10.7*16000 */ -#define FREQ_STEP 200 /* 12.5*16 */ - -/* (x==fmhz*16*1000) -> bits */ -#define FREQ2BITS(x) \ - ((((unsigned int)(x) + FREQ_IF + (FREQ_STEP << 1)) / (FREQ_STEP << 2)) << 2) - -#define BITS2FREQ(x) ((x) * FREQ_STEP - FREQ_IF) +static atomic_t maxiradio_instance = ATOMIC_INIT(0); +#define PCI_VENDOR_ID_GUILLEMOT 0x5046 +#define PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO 0x1001 struct maxiradio { + struct snd_tea575x tea; struct v4l2_device v4l2_dev; - struct video_device vdev; struct pci_dev *pdev; u16 io; /* base of radio io */ - u16 muted; /* VIDEO_AUDIO_MUTE */ - u16 stereo; /* VIDEO_TUNER_STEREO_ON */ - u16 tuned; /* signal strength (0 or 0xffff) */ - - unsigned long freq; - - struct mutex lock; }; static inline struct maxiradio *to_maxiradio(struct v4l2_device *v4l2_dev) @@ -110,259 +80,41 @@ static inline struct maxiradio *to_maxiradio(struct v4l2_device *v4l2_dev) return container_of(v4l2_dev, struct maxiradio, v4l2_dev); } -static void outbit(unsigned long bit, u16 io) -{ - int val = power | wren | (bit ? data : 0); - - outb(val, io); - udelay(4); - outb(val | clk, io); - udelay(4); - outb(val, io); - udelay(4); -} - -static void turn_power(struct maxiradio *dev, int p) -{ - if (p != 0) { - dprintk(dev, 1, "Radio powered on\n"); - outb(power, dev->io); - } else { - dprintk(dev, 1, "Radio powered off\n"); - outb(0, dev->io); - } -} - -static void set_freq(struct maxiradio *dev, u32 freq) -{ - unsigned long int si; - int bl; - int io = dev->io; - int val = FREQ2BITS(freq); - - /* TEA5757 shift register bits (see pdf) */ - - outbit(0, io); /* 24 search */ - outbit(1, io); /* 23 search up/down */ - - outbit(0, io); /* 22 stereo/mono */ - - outbit(0, io); /* 21 band */ - outbit(0, io); /* 20 band (only 00=FM works I think) */ - - outbit(0, io); /* 19 port ? */ - outbit(0, io); /* 18 port ? */ - - outbit(0, io); /* 17 search level */ - outbit(0, io); /* 16 search level */ - - si = 0x8000; - for (bl = 1; bl <= 16; bl++) { - outbit(val & si, io); - si >>= 1; - } - - dprintk(dev, 1, "Radio freq set to %d.%02d MHz\n", - freq / 16000, - freq % 16000 * 100 / 16000); - - turn_power(dev, 1); -} - -static int get_stereo(u16 io) +static void maxiradio_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) { - outb(power,io); - udelay(4); + struct maxiradio *dev = tea->private_data; + u8 bits = 0; - return !(inb(io) & mo_st); -} + bits |= (pins & TEA575X_DATA) ? data : 0; + bits |= (pins & TEA575X_CLK) ? clk : 0; + bits |= (pins & TEA575X_WREN) ? wren : 0; + bits |= power; -static int get_tune(u16 io) -{ - outb(power+clk,io); - udelay(4); - - return !(inb(io) & mo_st); -} - - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - struct maxiradio *dev = video_drvdata(file); - - strlcpy(v->driver, "radio-maxiradio", sizeof(v->driver)); - strlcpy(v->card, "Maxi Radio FM2000 radio", sizeof(v->card)); - snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(dev->pdev)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; + outb(bits, dev->io); } -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) +/* Note: this card cannot read out the data of the shift registers, + only the mono/stereo pin works. */ +static u8 maxiradio_tea575x_get_pins(struct snd_tea575x *tea) { - struct maxiradio *dev = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - mutex_lock(&dev->lock); - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = FREQ_LO; - v->rangehigh = FREQ_HI; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (get_stereo(dev->io)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xffff * get_tune(dev->io); - mutex_unlock(&dev->lock); + struct maxiradio *dev = tea->private_data; + u8 bits = inb(dev->io); - return 0; + return ((bits & data) ? TEA575X_DATA : 0) | + ((bits & mo_st) ? TEA575X_MOST : 0); } -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) +static void maxiradio_tea575x_set_direction(struct snd_tea575x *tea, bool output) { - return v->index ? -EINVAL : 0; } -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct maxiradio *dev = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) { - dprintk(dev, 1, "radio freq (%d.%02d MHz) out of range (%d-%d)\n", - f->frequency / 16000, - f->frequency % 16000 * 100 / 16000, - FREQ_LO / 16000, FREQ_HI / 16000); - - return -EINVAL; - } - - mutex_lock(&dev->lock); - dev->freq = f->frequency; - set_freq(dev, dev->freq); - msleep(125); - mutex_unlock(&dev->lock); - - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct maxiradio *dev = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = dev->freq; - - dprintk(dev, 4, "radio freq is %d.%02d MHz", - f->frequency / 16000, - f->frequency % 16000 * 100 / 16000); - - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct maxiradio *dev = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = dev->muted; - return 0; - } - - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct maxiradio *dev = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - mutex_lock(&dev->lock); - dev->muted = ctrl->value; - if (dev->muted) - turn_power(dev, 0); - else - set_freq(dev, dev->freq); - mutex_unlock(&dev->lock); - return 0; - } - - return -EINVAL; -} - -static const struct v4l2_file_operations maxiradio_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static struct snd_tea575x_ops maxiradio_tea_ops = { + .set_pins = maxiradio_tea575x_set_pins, + .get_pins = maxiradio_tea575x_get_pins, + .set_direction = maxiradio_tea575x_set_direction, }; -static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, -}; - -static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit maxiradio_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct maxiradio *dev; struct v4l2_device *v4l2_dev; @@ -375,63 +127,60 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d } v4l2_dev = &dev->v4l2_dev; - mutex_init(&dev->lock); - dev->pdev = pdev; - dev->muted = 1; - dev->freq = FREQ_LO; - - strlcpy(v4l2_dev->name, "maxiradio", sizeof(v4l2_dev->name)); + v4l2_device_set_name(v4l2_dev, "maxiradio", &maxiradio_instance); retval = v4l2_device_register(&pdev->dev, v4l2_dev); if (retval < 0) { v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); goto errfr; } + dev->tea.private_data = dev; + dev->tea.ops = &maxiradio_tea_ops; + /* The data pin cannot be read. This may be a hardware limitation, or + we just don't know how to read it. */ + dev->tea.cannot_read_data = true; + dev->tea.v4l2_dev = v4l2_dev; + dev->tea.radio_nr = radio_nr; + strlcpy(dev->tea.card, "Maxi Radio FM2000", sizeof(dev->tea.card)); + snprintf(dev->tea.bus_info, sizeof(dev->tea.bus_info), + "PCI:%s", pci_name(pdev)); + + retval = -ENODEV; if (!request_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0), "Maxi Radio FM 2000")) { - v4l2_err(v4l2_dev, "can't reserve I/O ports\n"); - goto err_out; + pci_resource_len(pdev, 0), v4l2_dev->name)) { + dev_err(&pdev->dev, "can't reserve I/O ports\n"); + goto err_hdl; } if (pci_enable_device(pdev)) goto err_out_free_region; dev->io = pci_resource_start(pdev, 0); - strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); - dev->vdev.v4l2_dev = v4l2_dev; - dev->vdev.fops = &maxiradio_fops; - dev->vdev.ioctl_ops = &maxiradio_ioctl_ops; - dev->vdev.release = video_device_release_empty; - video_set_drvdata(&dev->vdev, dev); - - if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_err(v4l2_dev, "can't register device!"); + if (snd_tea575x_init(&dev->tea)) { + printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n"); goto err_out_free_region; } - - v4l2_info(v4l2_dev, "version " DRIVER_VERSION "\n"); - - v4l2_info(v4l2_dev, "found Guillemot MAXI Radio device (io = 0x%x)\n", - dev->io); return 0; err_out_free_region: release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); -err_out: +err_hdl: v4l2_device_unregister(v4l2_dev); errfr: kfree(dev); - return -ENODEV; + return retval; } -static void __devexit maxiradio_remove_one(struct pci_dev *pdev) +static void __devexit maxiradio_remove(struct pci_dev *pdev) { struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); struct maxiradio *dev = to_maxiradio(v4l2_dev); - video_unregister_device(&dev->vdev); - v4l2_device_unregister(&dev->v4l2_dev); + snd_tea575x_exit(&dev->tea); + /* Turn off power */ + outb(0, dev->io); + v4l2_device_unregister(v4l2_dev); release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); } @@ -446,19 +195,19 @@ MODULE_DEVICE_TABLE(pci, maxiradio_pci_tbl); static struct pci_driver maxiradio_driver = { .name = "radio-maxiradio", .id_table = maxiradio_pci_tbl, - .probe = maxiradio_init_one, - .remove = __devexit_p(maxiradio_remove_one), + .probe = maxiradio_probe, + .remove = __devexit_p(maxiradio_remove), }; -static int __init maxiradio_radio_init(void) +static int __init maxiradio_init(void) { return pci_register_driver(&maxiradio_driver); } -static void __exit maxiradio_radio_exit(void) +static void __exit maxiradio_exit(void) { pci_unregister_driver(&maxiradio_driver); } -module_init(maxiradio_radio_init); -module_exit(maxiradio_radio_exit); +module_init(maxiradio_init); +module_exit(maxiradio_exit); diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 3628be617ee9..b275c5d0fe9a 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -1,11 +1,12 @@ -/* RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff +/* + * RadioTrack II driver + * Copyright 1998 Ben Pfaff * * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> * - * TODO: Allow for more than one of these foolish entities :-) - * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> */ @@ -18,323 +19,120 @@ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" MODULE_AUTHOR("Ben Pfaff"); MODULE_DESCRIPTION("A driver for the RadioTrack II radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("0.1.99"); #ifndef CONFIG_RADIO_RTRACK2_PORT #define CONFIG_RADIO_RTRACK2_PORT -1 #endif -static int io = CONFIG_RADIO_RTRACK2_PORT; -static int radio_nr = -1; - -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20c or 0x30c)"); -module_param(radio_nr, int, 0); - -struct rtrack2 -{ - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; - unsigned long curfreq; - int muted; - struct mutex lock; -}; +#define RTRACK2_MAX 2 -static struct rtrack2 rtrack2_card; +static int io[RTRACK2_MAX] = { [0] = CONFIG_RADIO_RTRACK2_PORT, + [1 ... (RTRACK2_MAX - 1)] = -1 }; +static int radio_nr[RTRACK2_MAX] = { [0 ... (RTRACK2_MAX - 1)] = -1 }; +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); -/* local things */ - -static void rt_mute(struct rtrack2 *dev) -{ - if (dev->muted) - return; - mutex_lock(&dev->lock); - outb(1, dev->io); - mutex_unlock(&dev->lock); - dev->muted = 1; -} - -static void rt_unmute(struct rtrack2 *dev) +static struct radio_isa_card *rtrack2_alloc(void) { - if(dev->muted == 0) - return; - mutex_lock(&dev->lock); - outb(0, dev->io); - mutex_unlock(&dev->lock); - dev->muted = 0; + return kzalloc(sizeof(struct radio_isa_card), GFP_KERNEL); } -static void zero(struct rtrack2 *dev) +static void zero(struct radio_isa_card *isa) { - outb_p(1, dev->io); - outb_p(3, dev->io); - outb_p(1, dev->io); + outb_p(1, isa->io); + outb_p(3, isa->io); + outb_p(1, isa->io); } -static void one(struct rtrack2 *dev) +static void one(struct radio_isa_card *isa) { - outb_p(5, dev->io); - outb_p(7, dev->io); - outb_p(5, dev->io); + outb_p(5, isa->io); + outb_p(7, isa->io); + outb_p(5, isa->io); } -static int rt_setfreq(struct rtrack2 *dev, unsigned long freq) +static int rtrack2_s_frequency(struct radio_isa_card *isa, u32 freq) { int i; - mutex_lock(&dev->lock); - dev->curfreq = freq; freq = freq / 200 + 856; - outb_p(0xc8, dev->io); - outb_p(0xc9, dev->io); - outb_p(0xc9, dev->io); + outb_p(0xc8, isa->io); + outb_p(0xc9, isa->io); + outb_p(0xc9, isa->io); for (i = 0; i < 10; i++) - zero(dev); + zero(isa); for (i = 14; i >= 0; i--) if (freq & (1 << i)) - one(dev); + one(isa); else - zero(dev); - - outb_p(0xc8, dev->io); - if (!dev->muted) - outb_p(0, dev->io); - - mutex_unlock(&dev->lock); - return 0; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-rtrack2", sizeof(v->driver)); - strlcpy(v->card, "RadioTrack II", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} + zero(isa); -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int rt_getsigstr(struct rtrack2 *dev) -{ - int sig = 1; - - mutex_lock(&dev->lock); - if (inb(dev->io) & 2) /* bit set = no signal present */ - sig = 0; - mutex_unlock(&dev->lock); - return sig; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct rtrack2 *rt = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 88 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * rt_getsigstr(rt); + outb_p(0xc8, isa->io); + if (!v4l2_ctrl_g_ctrl(isa->mute)) + outb_p(0, isa->io); return 0; } -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static u32 rtrack2_g_signal(struct radio_isa_card *isa) { - struct rtrack2 *rt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - rt_setfreq(rt, f->frequency); - return 0; + /* bit set = no signal present */ + return (inb(isa->io) & 2) ? 0 : 0xffff; } -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static int rtrack2_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - struct rtrack2 *rt = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = rt->curfreq; + outb(mute, isa->io); return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535, 65535); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct rtrack2 *rt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = rt->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (rt->muted) - ctrl->value = 0; - else - ctrl->value = 65535; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct rtrack2 *rt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - rt_mute(rt); - else - rt_unmute(rt); - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (ctrl->value) - rt_unmute(rt); - else - rt_mute(rt); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static const struct v4l2_file_operations rtrack2_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops rtrack2_ops = { + .alloc = rtrack2_alloc, + .s_mute_volume = rtrack2_s_mute_volume, + .s_frequency = rtrack2_s_frequency, + .g_signal = rtrack2_g_signal, }; -static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, +static const int rtrack2_ioports[] = { 0x20f, 0x30f }; + +static struct radio_isa_driver rtrack2_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-rtrack2", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = rtrack2_ioports, + .num_of_io_ports = ARRAY_SIZE(rtrack2_ioports), + .region_size = 4, + .card = "AIMSlab RadioTrack II", + .ops = &rtrack2_ops, + .has_stereo = true, }; static int __init rtrack2_init(void) { - struct rtrack2 *dev = &rtrack2_card; - struct v4l2_device *v4l2_dev = &dev->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "rtrack2", sizeof(v4l2_dev->name)); - dev->io = io; - if (dev->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x20c or io=0x30c\n"); - return -EINVAL; - } - if (!request_region(dev->io, 4, "rtrack2")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", dev->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(dev->io, 4); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); - dev->vdev.v4l2_dev = v4l2_dev; - dev->vdev.fops = &rtrack2_fops; - dev->vdev.ioctl_ops = &rtrack2_ioctl_ops; - dev->vdev.release = video_device_release_empty; - video_set_drvdata(&dev->vdev, dev); - - /* mute card - prevents noisy bootups */ - outb(1, dev->io); - dev->muted = 1; - - mutex_init(&dev->lock); - if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(dev->io, 4); - return -EINVAL; - } - - v4l2_info(v4l2_dev, "AIMSlab Radiotrack II card driver.\n"); - - return 0; + return isa_register_driver(&rtrack2_driver.driver, RTRACK2_MAX); } static void __exit rtrack2_exit(void) { - struct rtrack2 *dev = &rtrack2_card; - - video_unregister_device(&dev->vdev); - v4l2_device_unregister(&dev->v4l2_dev); - release_region(dev->io, 4); + isa_unregister_driver(&rtrack2_driver.driver); } module_init(rtrack2_init); diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 7ab9afadf29b..7c69214334bf 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -9,16 +9,23 @@ #include <linux/delay.h> #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ +#include <linux/slab.h> #include <linux/ioport.h> /* request_region */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/isa.h> #include <sound/tea575x-tuner.h> MODULE_AUTHOR("Ondrej Zary"); MODULE_DESCRIPTION("MediaForte SF16-FMR2 FM radio card driver"); MODULE_LICENSE("GPL"); +static int radio_nr = -1; +module_param(radio_nr, int, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device number"); + struct fmr2 { int io; + struct v4l2_device v4l2_dev; struct snd_tea575x tea; struct v4l2_ctrl *volume; struct v4l2_ctrl *balance; @@ -26,7 +33,6 @@ struct fmr2 { /* the port is hardwired so no need to support multiple cards */ #define FMR2_PORT 0x384 -static struct fmr2 fmr2_card; /* TEA575x tuner pins */ #define STR_DATA (1 << 0) @@ -180,26 +186,46 @@ static int fmr2_tea_ext_init(struct snd_tea575x *tea) return 0; } -static int __init fmr2_init(void) +static int __devinit fmr2_probe(struct device *pdev, unsigned int dev) { - struct fmr2 *fmr2 = &fmr2_card; + struct fmr2 *fmr2; + int err; + + fmr2 = kzalloc(sizeof(*fmr2), GFP_KERNEL); + if (fmr2 == NULL) + return -ENOMEM; + strlcpy(fmr2->v4l2_dev.name, dev_name(pdev), + sizeof(fmr2->v4l2_dev.name)); fmr2->io = FMR2_PORT; - if (!request_region(fmr2->io, 2, "SF16-FMR2")) { + if (!request_region(fmr2->io, 2, fmr2->v4l2_dev.name)) { printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io); + kfree(fmr2); return -EBUSY; } + dev_set_drvdata(pdev, fmr2); + err = v4l2_device_register(pdev, &fmr2->v4l2_dev); + if (err < 0) { + v4l2_err(&fmr2->v4l2_dev, "Could not register v4l2_device\n"); + release_region(fmr2->io, 2); + kfree(fmr2); + return err; + } + fmr2->tea.v4l2_dev = &fmr2->v4l2_dev; fmr2->tea.private_data = fmr2; + fmr2->tea.radio_nr = radio_nr; fmr2->tea.ops = &fmr2_tea_ops; fmr2->tea.ext_init = fmr2_tea_ext_init; strlcpy(fmr2->tea.card, "SF16-FMR2", sizeof(fmr2->tea.card)); - strcpy(fmr2->tea.bus_info, "ISA"); + snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "ISA:%s", + fmr2->v4l2_dev.name); if (snd_tea575x_init(&fmr2->tea)) { printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n"); release_region(fmr2->io, 2); + kfree(fmr2); return -ENODEV; } @@ -207,12 +233,33 @@ static int __init fmr2_init(void) return 0; } -static void __exit fmr2_exit(void) +static int __exit fmr2_remove(struct device *pdev, unsigned int dev) { - struct fmr2 *fmr2 = &fmr2_card; + struct fmr2 *fmr2 = dev_get_drvdata(pdev); snd_tea575x_exit(&fmr2->tea); release_region(fmr2->io, 2); + v4l2_device_unregister(&fmr2->v4l2_dev); + kfree(fmr2); + return 0; +} + +struct isa_driver fmr2_driver = { + .probe = fmr2_probe, + .remove = fmr2_remove, + .driver = { + .name = "radio-sf16fmr2", + }, +}; + +static int __init fmr2_init(void) +{ + return isa_register_driver(&fmr2_driver, 1); +} + +static void __exit fmr2_exit(void) +{ + isa_unregister_driver(&fmr2_driver); } module_init(fmr2_init); diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index db20904d01f0..6b1fae32b483 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -575,21 +575,7 @@ static struct i2c_driver tea5764_i2c_driver = { .id_table = tea5764_id, }; -/* init the driver */ -static int __init tea5764_init(void) -{ - int ret = i2c_add_driver(&tea5764_i2c_driver); - - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ": " - DRIVER_DESC "\n"); - return ret; -} - -/* cleanup the driver */ -static void __exit tea5764_exit(void) -{ - i2c_del_driver(&tea5764_i2c_driver); -} +module_i2c_driver(tea5764_i2c_driver); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); @@ -600,6 +586,3 @@ module_param(use_xtal, int, 0); MODULE_PARM_DESC(use_xtal, "Chip have a xtal connected in board"); module_param(radio_nr, int, 0); MODULE_PARM_DESC(radio_nr, "video4linux device number to use"); - -module_init(tea5764_init); -module_exit(tea5764_exit); diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index f2ed9cc3cf3b..be10a802e3a9 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -16,11 +16,7 @@ * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); * Volume Control is done digitally * - * there is a I2C controlled RDS decoder (SAA6588) onboard, which i would like to support someday - * (as soon i have understand how to get started :) - * If you can help me out with that, please contact me!! - * - * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> */ @@ -30,43 +26,24 @@ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" -MODULE_AUTHOR("R.OFFERMANNS & others"); +MODULE_AUTHOR("R. Offermans & others"); MODULE_DESCRIPTION("A driver for the TerraTec ActiveRadio Standalone radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); - -#ifndef CONFIG_RADIO_TERRATEC_PORT -#define CONFIG_RADIO_TERRATEC_PORT 0x590 -#endif +MODULE_VERSION("0.1.99"); -static int io = CONFIG_RADIO_TERRATEC_PORT; +/* Note: there seems to be only one possible port (0x590), but without + hardware this is hard to verify. For now, this is the only one we will + support. */ +static int io = 0x590; static int radio_nr = -1; -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the TerraTec ActiveRadio card (0x590 or 0x591)"); -module_param(radio_nr, int, 0); - -static struct v4l2_queryctrl radio_qctrl[] = { - { - .id = V4L2_CID_AUDIO_MUTE, - .name = "Mute", - .minimum = 0, - .maximum = 1, - .default_value = 1, - .type = V4L2_CTRL_TYPE_BOOLEAN, - },{ - .id = V4L2_CID_AUDIO_VOLUME, - .name = "Volume", - .minimum = 0, - .maximum = 0xff, - .step = 1, - .default_value = 0xff, - .type = V4L2_CTRL_TYPE_INTEGER, - } -}; +module_param(radio_nr, int, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device number"); #define WRT_DIS 0x00 #define CLK_OFF 0x00 @@ -76,63 +53,24 @@ static struct v4l2_queryctrl radio_qctrl[] = { #define CLK_ON 0x08 #define WRT_EN 0x10 -struct terratec +static struct radio_isa_card *terratec_alloc(void) { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; - int curvol; - unsigned long curfreq; - int muted; - struct mutex lock; -}; - -static struct terratec terratec_card; - -/* local things */ + return kzalloc(sizeof(struct radio_isa_card), GFP_KERNEL); +} -static void tt_write_vol(struct terratec *tt, int volume) +static int terratec_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { int i; - volume = volume + (volume * 32); /* change both channels */ - mutex_lock(&tt->lock); + if (mute) + vol = 0; + vol = vol + (vol * 32); /* change both channels */ for (i = 0; i < 8; i++) { - if (volume & (0x80 >> i)) - outb(0x80, tt->io + 1); + if (vol & (0x80 >> i)) + outb(0x80, isa->io + 1); else - outb(0x00, tt->io + 1); - } - mutex_unlock(&tt->lock); -} - - - -static void tt_mute(struct terratec *tt) -{ - tt->muted = 1; - tt_write_vol(tt, 0); -} - -static int tt_setvol(struct terratec *tt, int vol) -{ - if (vol == tt->curvol) { /* requested volume = current */ - if (tt->muted) { /* user is unmuting the card */ - tt->muted = 0; - tt_write_vol(tt, vol); /* enable card */ - } - return 0; - } - - if (vol == 0) { /* volume = 0 means mute the card */ - tt_write_vol(tt, 0); /* "turn off card" by setting vol to 0 */ - tt->curvol = vol; /* track the volume state! */ - return 0; + outb(0x00, isa->io + 1); } - - tt->muted = 0; - tt_write_vol(tt, vol); - tt->curvol = vol; return 0; } @@ -140,20 +78,15 @@ static int tt_setvol(struct terratec *tt, int vol) /* this is the worst part in this driver */ /* many more or less strange things are going on here, but hey, it works :) */ -static int tt_setfreq(struct terratec *tt, unsigned long freq1) +static int terratec_s_frequency(struct radio_isa_card *isa, u32 freq) { - int freq; int i; int p; - int temp; + int temp; long rest; unsigned char buffer[25]; /* we have to bit shift 25 registers */ - mutex_lock(&tt->lock); - - tt->curfreq = freq1; - - freq = freq1 / 160; /* convert the freq. to a nice to handle value */ + freq = freq / 160; /* convert the freq. to a nice to handle value */ memset(buffer, 0, sizeof(buffer)); rest = freq * 10 + 10700; /* I once had understood what is going on here */ @@ -175,239 +108,61 @@ static int tt_setfreq(struct terratec *tt, unsigned long freq1) for (i = 24; i > -1; i--) { /* bit shift the values to the radiocard */ if (buffer[i] == 1) { - outb(WRT_EN | DATA, tt->io); - outb(WRT_EN | DATA | CLK_ON, tt->io); - outb(WRT_EN | DATA, tt->io); + outb(WRT_EN | DATA, isa->io); + outb(WRT_EN | DATA | CLK_ON, isa->io); + outb(WRT_EN | DATA, isa->io); } else { - outb(WRT_EN | 0x00, tt->io); - outb(WRT_EN | 0x00 | CLK_ON, tt->io); - } - } - outb(0x00, tt->io); - - mutex_unlock(&tt->lock); - - return 0; -} - -static int tt_getsigstr(struct terratec *tt) -{ - if (inb(tt->io) & 2) /* bit set = no signal present */ - return 0; - return 1; /* signal present */ -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-terratec", sizeof(v->driver)); - strlcpy(v->card, "ActiveRadio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct terratec *tt = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * tt_getsigstr(tt); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct terratec *tt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - tt_setfreq(tt, f->frequency); - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct terratec *tt = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = tt->curfreq; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { - if (qc->id && qc->id == radio_qctrl[i].id) { - memcpy(qc, &(radio_qctrl[i]), sizeof(*qc)); - return 0; + outb(WRT_EN | 0x00, isa->io); + outb(WRT_EN | 0x00 | CLK_ON, isa->io); } } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct terratec *tt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (tt->muted) - ctrl->value = 1; - else - ctrl->value = 0; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = tt->curvol * 6554; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct terratec *tt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - tt_mute(tt); - else - tt_setvol(tt,tt->curvol); - return 0; - case V4L2_CID_AUDIO_VOLUME: - tt_setvol(tt,ctrl->value); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; + outb(0x00, isa->io); return 0; } -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) +static u32 terratec_g_signal(struct radio_isa_card *isa) { - return a->index ? -EINVAL : 0; + /* bit set = no signal present */ + return (inb(isa->io) & 2) ? 0 : 0xffff; } -static const struct v4l2_file_operations terratec_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops terratec_ops = { + .alloc = terratec_alloc, + .s_mute_volume = terratec_s_mute_volume, + .s_frequency = terratec_s_frequency, + .g_signal = terratec_g_signal, }; -static const struct v4l2_ioctl_ops terratec_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, +static const int terratec_ioports[] = { 0x590 }; + +static struct radio_isa_driver terratec_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-terratec", + }, + }, + .io_params = &io, + .radio_nr_params = &radio_nr, + .io_ports = terratec_ioports, + .num_of_io_ports = ARRAY_SIZE(terratec_ioports), + .region_size = 2, + .card = "TerraTec ActiveRadio", + .ops = &terratec_ops, + .has_stereo = true, + .max_volume = 10, }; static int __init terratec_init(void) { - struct terratec *tt = &terratec_card; - struct v4l2_device *v4l2_dev = &tt->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "terratec", sizeof(v4l2_dev->name)); - tt->io = io; - if (tt->io == -1) { - v4l2_err(v4l2_dev, "you must set an I/O address with io=0x590 or 0x591\n"); - return -EINVAL; - } - if (!request_region(tt->io, 2, "terratec")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(tt->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - strlcpy(tt->vdev.name, v4l2_dev->name, sizeof(tt->vdev.name)); - tt->vdev.v4l2_dev = v4l2_dev; - tt->vdev.fops = &terratec_fops; - tt->vdev.ioctl_ops = &terratec_ioctl_ops; - tt->vdev.release = video_device_release_empty; - video_set_drvdata(&tt->vdev, tt); - - mutex_init(&tt->lock); - - /* mute card - prevents noisy bootups */ - tt_write_vol(tt, 0); - - if (video_register_device(&tt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(&tt->v4l2_dev); - release_region(tt->io, 2); - return -EINVAL; - } - - v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver.\n"); - return 0; + return isa_register_driver(&terratec_driver.driver, 1); } static void __exit terratec_exit(void) { - struct terratec *tt = &terratec_card; - struct v4l2_device *v4l2_dev = &tt->v4l2_dev; - - video_unregister_device(&tt->vdev); - v4l2_device_unregister(&tt->v4l2_dev); - release_region(tt->io, 2); - v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver unloaded.\n"); + isa_unregister_driver(&terratec_driver.driver); } module_init(terratec_init); diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index b3f45a019d82..26a8c6002121 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -21,13 +21,15 @@ #include <linux/ioport.h> #include <linux/videodev2.h> #include <linux/io.h> +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); MODULE_DESCRIPTION("A driver for the Trust FM Radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("0.1.99"); /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */ @@ -35,39 +37,38 @@ MODULE_VERSION("0.0.3"); #define CONFIG_RADIO_TRUST_PORT -1 #endif -static int io = CONFIG_RADIO_TRUST_PORT; -static int radio_nr = -1; +#define TRUST_MAX 2 -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)"); -module_param(radio_nr, int, 0); +static int io[TRUST_MAX] = { [0] = CONFIG_RADIO_TRUST_PORT, + [1 ... (TRUST_MAX - 1)] = -1 }; +static int radio_nr[TRUST_MAX] = { [0 ... (TRUST_MAX - 1)] = -1 }; + +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Trust FM Radio card (0x350 or 0x358)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); struct trust { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; + struct radio_isa_card isa; int ioval; - __u16 curvol; - __u16 curbass; - __u16 curtreble; - int muted; - unsigned long curfreq; - int curstereo; - int curmute; - struct mutex lock; }; -static struct trust trust_card; +static struct radio_isa_card *trust_alloc(void) +{ + struct trust *tr = kzalloc(sizeof(*tr), GFP_KERNEL); + + return tr ? &tr->isa : NULL; +} /* i2c addresses */ #define TDA7318_ADDR 0x88 #define TSA6060T_ADDR 0xc4 -#define TR_DELAY do { inb(tr->io); inb(tr->io); inb(tr->io); } while (0) -#define TR_SET_SCL outb(tr->ioval |= 2, tr->io) -#define TR_CLR_SCL outb(tr->ioval &= 0xfd, tr->io) -#define TR_SET_SDA outb(tr->ioval |= 1, tr->io) -#define TR_CLR_SDA outb(tr->ioval &= 0xfe, tr->io) +#define TR_DELAY do { inb(tr->isa.io); inb(tr->isa.io); inb(tr->isa.io); } while (0) +#define TR_SET_SCL outb(tr->ioval |= 2, tr->isa.io) +#define TR_CLR_SCL outb(tr->ioval &= 0xfd, tr->isa.io) +#define TR_SET_SDA outb(tr->ioval |= 1, tr->isa.io) +#define TR_CLR_SDA outb(tr->ioval &= 0xfe, tr->isa.io) static void write_i2c(struct trust *tr, int n, ...) { @@ -84,10 +85,10 @@ static void write_i2c(struct trust *tr, int n, ...) TR_CLR_SCL; TR_DELAY; - for(; n; n--) { + for (; n; n--) { val = va_arg(args, unsigned); - for(mask = 0x80; mask; mask >>= 1) { - if(val & mask) + for (mask = 0x80; mask; mask >>= 1) { + if (val & mask) TR_SET_SDA; else TR_CLR_SDA; @@ -115,317 +116,128 @@ static void write_i2c(struct trust *tr, int n, ...) va_end(args); } -static void tr_setvol(struct trust *tr, __u16 vol) +static int trust_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - mutex_lock(&tr->lock); - tr->curvol = vol / 2048; - write_i2c(tr, 2, TDA7318_ADDR, tr->curvol ^ 0x1f); - mutex_unlock(&tr->lock); -} + struct trust *tr = container_of(isa, struct trust, isa); -static int basstreble2chip[15] = { - 0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8 -}; - -static void tr_setbass(struct trust *tr, __u16 bass) -{ - mutex_lock(&tr->lock); - tr->curbass = bass / 4370; - write_i2c(tr, 2, TDA7318_ADDR, 0x60 | basstreble2chip[tr->curbass]); - mutex_unlock(&tr->lock); -} - -static void tr_settreble(struct trust *tr, __u16 treble) -{ - mutex_lock(&tr->lock); - tr->curtreble = treble / 4370; - write_i2c(tr, 2, TDA7318_ADDR, 0x70 | basstreble2chip[tr->curtreble]); - mutex_unlock(&tr->lock); + tr->ioval = (tr->ioval & 0xf7) | (mute << 3); + outb(tr->ioval, isa->io); + write_i2c(tr, 2, TDA7318_ADDR, vol ^ 0x1f); + return 0; } -static void tr_setstereo(struct trust *tr, int stereo) +static int trust_s_stereo(struct radio_isa_card *isa, bool stereo) { - mutex_lock(&tr->lock); - tr->curstereo = !!stereo; - tr->ioval = (tr->ioval & 0xfb) | (!tr->curstereo << 2); - outb(tr->ioval, tr->io); - mutex_unlock(&tr->lock); -} + struct trust *tr = container_of(isa, struct trust, isa); -static void tr_setmute(struct trust *tr, int mute) -{ - mutex_lock(&tr->lock); - tr->curmute = !!mute; - tr->ioval = (tr->ioval & 0xf7) | (tr->curmute << 3); - outb(tr->ioval, tr->io); - mutex_unlock(&tr->lock); + tr->ioval = (tr->ioval & 0xfb) | (!stereo << 2); + outb(tr->ioval, isa->io); + return 0; } -static int tr_getsigstr(struct trust *tr) +static u32 trust_g_signal(struct radio_isa_card *isa) { int i, v; - mutex_lock(&tr->lock); for (i = 0, v = 0; i < 100; i++) - v |= inb(tr->io); - mutex_unlock(&tr->lock); + v |= inb(isa->io); return (v & 1) ? 0 : 0xffff; } -static int tr_getstereo(struct trust *tr) -{ - /* don't know how to determine it, just return the setting */ - return tr->curstereo; -} - -static void tr_setfreq(struct trust *tr, unsigned long f) +static int trust_s_frequency(struct radio_isa_card *isa, u32 freq) { - mutex_lock(&tr->lock); - tr->curfreq = f; - f /= 160; /* Convert to 10 kHz units */ - f += 1070; /* Add 10.7 MHz IF */ - write_i2c(tr, 5, TSA6060T_ADDR, (f << 1) | 1, f >> 7, 0x60 | ((f >> 15) & 1), 0); - mutex_unlock(&tr->lock); -} + struct trust *tr = container_of(isa, struct trust, isa); -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-trust", sizeof(v->driver)); - strlcpy(v->card, "Trust FM Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + freq /= 160; /* Convert to 10 kHz units */ + freq += 1070; /* Add 10.7 MHz IF */ + write_i2c(tr, 5, TSA6060T_ADDR, (freq << 1) | 1, + freq >> 7, 0x60 | ((freq >> 15) & 1), 0); return 0; } -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct trust *tr = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87.5 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (tr_getstereo(tr)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = tr_getsigstr(tr); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct trust *tr = video_drvdata(file); - - if (v->index) - return -EINVAL; - tr_setstereo(tr, v->audmode == V4L2_TUNER_MODE_STEREO); - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct trust *tr = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - tr_setfreq(tr, f->frequency); - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct trust *tr = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = tr->curfreq; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 2048, 65535); - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - return v4l2_ctrl_query_fill(qc, 0, 65535, 4370, 32768); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct trust *tr = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = tr->curmute; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = tr->curvol * 2048; - return 0; - case V4L2_CID_AUDIO_BASS: - ctrl->value = tr->curbass * 4370; - return 0; - case V4L2_CID_AUDIO_TREBLE: - ctrl->value = tr->curtreble * 4370; - return 0; - } - return -EINVAL; -} +static int basstreble2chip[15] = { + 0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8 +}; -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) +static int trust_s_ctrl(struct v4l2_ctrl *ctrl) { - struct trust *tr = video_drvdata(file); + struct radio_isa_card *isa = + container_of(ctrl->handler, struct radio_isa_card, hdl); + struct trust *tr = container_of(isa, struct trust, isa); switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - tr_setmute(tr, ctrl->value); - return 0; - case V4L2_CID_AUDIO_VOLUME: - tr_setvol(tr, ctrl->value); - return 0; case V4L2_CID_AUDIO_BASS: - tr_setbass(tr, ctrl->value); + write_i2c(tr, 2, TDA7318_ADDR, 0x60 | basstreble2chip[ctrl->val]); return 0; case V4L2_CID_AUDIO_TREBLE: - tr_settreble(tr, ctrl->value); + write_i2c(tr, 2, TDA7318_ADDR, 0x70 | basstreble2chip[ctrl->val]); return 0; } return -EINVAL; } -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static const struct v4l2_file_operations trust_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops trust_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, +static const struct v4l2_ctrl_ops trust_ctrl_ops = { + .s_ctrl = trust_s_ctrl, }; -static int __init trust_init(void) +static int trust_initialize(struct radio_isa_card *isa) { - struct trust *tr = &trust_card; - struct v4l2_device *v4l2_dev = &tr->v4l2_dev; - int res; + struct trust *tr = container_of(isa, struct trust, isa); - strlcpy(v4l2_dev->name, "trust", sizeof(v4l2_dev->name)); - tr->io = io; tr->ioval = 0xf; - mutex_init(&tr->lock); - - if (tr->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x0x350 or 0x358\n"); - return -EINVAL; - } - if (!request_region(tr->io, 2, "Trust FM Radio")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", tr->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(tr->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - strlcpy(tr->vdev.name, v4l2_dev->name, sizeof(tr->vdev.name)); - tr->vdev.v4l2_dev = v4l2_dev; - tr->vdev.fops = &trust_fops; - tr->vdev.ioctl_ops = &trust_ioctl_ops; - tr->vdev.release = video_device_release_empty; - video_set_drvdata(&tr->vdev, tr); - write_i2c(tr, 2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0xe0); /* speaker att. RR = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0x40); /* stereo 1 input, gain = 18.75 dB */ - tr_setvol(tr, 0xffff); - tr_setbass(tr, 0x8000); - tr_settreble(tr, 0x8000); - tr_setstereo(tr, 1); - - /* mute card - prevents noisy bootups */ - tr_setmute(tr, 1); + v4l2_ctrl_new_std(&isa->hdl, &trust_ctrl_ops, + V4L2_CID_AUDIO_BASS, 0, 15, 1, 8); + v4l2_ctrl_new_std(&isa->hdl, &trust_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, 0, 15, 1, 8); + return isa->hdl.error; +} - if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(tr->io, 2); - return -EINVAL; - } +static const struct radio_isa_ops trust_ops = { + .init = trust_initialize, + .alloc = trust_alloc, + .s_mute_volume = trust_s_mute_volume, + .s_frequency = trust_s_frequency, + .s_stereo = trust_s_stereo, + .g_signal = trust_g_signal, +}; - v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n"); +static const int trust_ioports[] = { 0x350, 0x358 }; + +static struct radio_isa_driver trust_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-trust", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = trust_ioports, + .num_of_io_ports = ARRAY_SIZE(trust_ioports), + .region_size = 2, + .card = "Trust FM Radio", + .ops = &trust_ops, + .has_stereo = true, + .max_volume = 31, +}; - return 0; +static int __init trust_init(void) +{ + return isa_register_driver(&trust_driver.driver, TRUST_MAX); } -static void __exit cleanup_trust_module(void) +static void __exit trust_exit(void) { - struct trust *tr = &trust_card; - - video_unregister_device(&tr->vdev); - v4l2_device_unregister(&tr->v4l2_dev); - release_region(tr->io, 2); + isa_unregister_driver(&trust_driver.driver); } module_init(trust_init); -module_exit(cleanup_trust_module); +module_exit(trust_exit); diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 398726abc0c8..eb72a4d13758 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -33,63 +33,53 @@ #include <linux/ioport.h> /* request_region */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" #define DRIVER_VERSION "0.1.2" MODULE_AUTHOR("Dr. Henrik Seidel"); MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio)."); MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); +MODULE_VERSION("0.1.99"); #ifndef CONFIG_RADIO_TYPHOON_PORT #define CONFIG_RADIO_TYPHOON_PORT -1 #endif #ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ -#define CONFIG_RADIO_TYPHOON_MUTEFREQ 0 +#define CONFIG_RADIO_TYPHOON_MUTEFREQ 87000 #endif -static int io = CONFIG_RADIO_TYPHOON_PORT; -static int radio_nr = -1; - -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)"); - -module_param(radio_nr, int, 0); +#define TYPHOON_MAX 2 +static int io[TYPHOON_MAX] = { [0] = CONFIG_RADIO_TYPHOON_PORT, + [1 ... (TYPHOON_MAX - 1)] = -1 }; +static int radio_nr[TYPHOON_MAX] = { [0 ... (TYPHOON_MAX - 1)] = -1 }; static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ; + +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Typhoon card (0x316 or 0x336)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); module_param(mutefreq, ulong, 0); MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)"); -#define BANNER "Typhoon Radio Card driver v" DRIVER_VERSION "\n" - struct typhoon { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; - int curvol; + struct radio_isa_card isa; int muted; - unsigned long curfreq; - unsigned long mutefreq; - struct mutex lock; }; -static struct typhoon typhoon_card; - -static void typhoon_setvol_generic(struct typhoon *dev, int vol) +static struct radio_isa_card *typhoon_alloc(void) { - mutex_lock(&dev->lock); - vol >>= 14; /* Map 16 bit to 2 bit */ - vol &= 3; - outb_p(vol / 2, dev->io); /* Set the volume, high bit. */ - outb_p(vol % 2, dev->io + 2); /* Set the volume, low bit. */ - mutex_unlock(&dev->lock); + struct typhoon *ty = kzalloc(sizeof(*ty), GFP_KERNEL); + + return ty ? &ty->isa : NULL; } -static int typhoon_setfreq_generic(struct typhoon *dev, - unsigned long frequency) +static int typhoon_s_frequency(struct radio_isa_card *isa, u32 freq) { unsigned long outval; unsigned long x; @@ -105,302 +95,86 @@ static int typhoon_setfreq_generic(struct typhoon *dev, * */ - mutex_lock(&dev->lock); - x = frequency / 160; + x = freq / 160; outval = (x * x + 2500) / 5000; outval = (outval * x + 5000) / 10000; outval -= (10 * x * x + 10433) / 20866; outval += 4 * x - 11505; - outb_p((outval >> 8) & 0x01, dev->io + 4); - outb_p(outval >> 9, dev->io + 6); - outb_p(outval & 0xff, dev->io + 8); - mutex_unlock(&dev->lock); - - return 0; -} - -static int typhoon_setfreq(struct typhoon *dev, unsigned long frequency) -{ - typhoon_setfreq_generic(dev, frequency); - dev->curfreq = frequency; - return 0; -} - -static void typhoon_mute(struct typhoon *dev) -{ - if (dev->muted == 1) - return; - typhoon_setvol_generic(dev, 0); - typhoon_setfreq_generic(dev, dev->mutefreq); - dev->muted = 1; -} - -static void typhoon_unmute(struct typhoon *dev) -{ - if (dev->muted == 0) - return; - typhoon_setfreq_generic(dev, dev->curfreq); - typhoon_setvol_generic(dev, dev->curvol); - dev->muted = 0; -} - -static int typhoon_setvol(struct typhoon *dev, int vol) -{ - if (dev->muted && vol != 0) { /* user is unmuting the card */ - dev->curvol = vol; - typhoon_unmute(dev); - return 0; - } - if (vol == dev->curvol) /* requested volume == current */ - return 0; - - if (vol == 0) { /* volume == 0 means mute the card */ - typhoon_mute(dev); - dev->curvol = vol; - return 0; - } - typhoon_setvol_generic(dev, vol); - dev->curvol = vol; - return 0; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-typhoon", sizeof(v->driver)); - strlcpy(v->card, "Typhoon Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87.5 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF; /* We can't get the signal strength */ - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct typhoon *dev = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = dev->curfreq; - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct typhoon *dev = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - dev->curfreq = f->frequency; - typhoon_setfreq(dev, dev->curfreq); + outb_p((outval >> 8) & 0x01, isa->io + 4); + outb_p(outval >> 9, isa->io + 6); + outb_p(outval & 0xff, isa->io + 8); return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) +static int typhoon_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 16384, 65535); - } - return -EINVAL; -} + struct typhoon *ty = container_of(isa, struct typhoon, isa); -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct typhoon *dev = video_drvdata(file); + if (mute) + vol = 0; + vol >>= 14; /* Map 16 bit to 2 bit */ + vol &= 3; + outb_p(vol / 2, isa->io); /* Set the volume, high bit. */ + outb_p(vol % 2, isa->io + 2); /* Set the volume, low bit. */ - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = dev->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = dev->curvol; - return 0; + if (vol == 0 && !ty->muted) { + ty->muted = true; + return typhoon_s_frequency(isa, mutefreq << 4); } - return -EINVAL; -} - -static int vidioc_s_ctrl (struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct typhoon *dev = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - typhoon_mute(dev); - else - typhoon_unmute(dev); - return 0; - case V4L2_CID_AUDIO_VOLUME: - typhoon_setvol(dev, ctrl->value); - return 0; + if (vol && ty->muted) { + ty->muted = false; + return typhoon_s_frequency(isa, isa->freq); } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; return 0; } -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static int vidioc_log_status(struct file *file, void *priv) -{ - struct typhoon *dev = video_drvdata(file); - struct v4l2_device *v4l2_dev = &dev->v4l2_dev; - - v4l2_info(v4l2_dev, BANNER); -#ifdef MODULE - v4l2_info(v4l2_dev, "Load type: Driver loaded as a module\n\n"); -#else - v4l2_info(v4l2_dev, "Load type: Driver compiled into kernel\n\n"); -#endif - v4l2_info(v4l2_dev, "frequency = %lu kHz\n", dev->curfreq >> 4); - v4l2_info(v4l2_dev, "volume = %d\n", dev->curvol); - v4l2_info(v4l2_dev, "mute = %s\n", dev->muted ? "on" : "off"); - v4l2_info(v4l2_dev, "io = 0x%x\n", dev->io); - v4l2_info(v4l2_dev, "mute frequency = %lu kHz\n", dev->mutefreq >> 4); - return 0; -} - -static const struct v4l2_file_operations typhoon_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops typhoon_ops = { + .alloc = typhoon_alloc, + .s_mute_volume = typhoon_s_mute_volume, + .s_frequency = typhoon_s_frequency, }; -static const struct v4l2_ioctl_ops typhoon_ioctl_ops = { - .vidioc_log_status = vidioc_log_status, - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int typhoon_ioports[] = { 0x316, 0x336 }; + +static struct radio_isa_driver typhoon_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-typhoon", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = typhoon_ioports, + .num_of_io_ports = ARRAY_SIZE(typhoon_ioports), + .region_size = 8, + .card = "Typhoon Radio", + .ops = &typhoon_ops, + .has_stereo = true, + .max_volume = 3, }; static int __init typhoon_init(void) { - struct typhoon *dev = &typhoon_card; - struct v4l2_device *v4l2_dev = &dev->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name)); - dev->io = io; - - if (dev->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n"); - return -EINVAL; - } - - if (mutefreq < 87000 || mutefreq > 108500) { - v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n"); - v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n"); - return -EINVAL; - } - dev->curfreq = dev->mutefreq = mutefreq << 4; - - mutex_init(&dev->lock); - if (!request_region(dev->io, 8, "typhoon")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", - dev->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(dev->io, 8); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; + if (mutefreq < 87000 || mutefreq > 108000) { + printk(KERN_ERR "%s: You must set a frequency (in kHz) used when muting the card,\n", + typhoon_driver.driver.driver.name); + printk(KERN_ERR "%s: e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108000)\n", + typhoon_driver.driver.driver.name); + return -ENODEV; } - v4l2_info(v4l2_dev, BANNER); - - strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); - dev->vdev.v4l2_dev = v4l2_dev; - dev->vdev.fops = &typhoon_fops; - dev->vdev.ioctl_ops = &typhoon_ioctl_ops; - dev->vdev.release = video_device_release_empty; - video_set_drvdata(&dev->vdev, dev); - - /* mute card - prevents noisy bootups */ - typhoon_mute(dev); - - if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(&dev->v4l2_dev); - release_region(dev->io, 8); - return -EINVAL; - } - v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io); - v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq); - - return 0; + return isa_register_driver(&typhoon_driver.driver, TYPHOON_MAX); } static void __exit typhoon_exit(void) { - struct typhoon *dev = &typhoon_card; - - video_unregister_device(&dev->vdev); - v4l2_device_unregister(&dev->v4l2_dev); - release_region(dev->io, 8); + isa_unregister_driver(&typhoon_driver.driver); } + module_init(typhoon_init); module_exit(typhoon_exit); diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index f5613b948203..026e88eef29c 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -1,5 +1,6 @@ -/* zoltrix radio plus driver for Linux radio support - * (c) 1998 C. van Schaik <carl@leg.uct.ac.za> +/* + * Zoltrix Radio Plus driver + * Copyright 1998 C. van Schaik <carl@leg.uct.ac.za> * * BUGS * Due to the inconsistency in reading from the signal flags @@ -27,6 +28,14 @@ * * 2006-07-24 - Converted to V4L2 API * by Mauro Carvalho Chehab <mchehab@infradead.org> + * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> + * + * Note that this is the driver for the Zoltrix Radio Plus. + * This driver does not work for the Zoltrix Radio Plus 108 or the + * Zoltrix Radio Plus for Windows. + * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -36,82 +45,70 @@ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" -MODULE_AUTHOR("C.van Schaik"); +MODULE_AUTHOR("C. van Schaik"); MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("0.1.99"); #ifndef CONFIG_RADIO_ZOLTRIX_PORT #define CONFIG_RADIO_ZOLTRIX_PORT -1 #endif -static int io = CONFIG_RADIO_ZOLTRIX_PORT; -static int radio_nr = -1; +#define ZOLTRIX_MAX 2 + +static int io[ZOLTRIX_MAX] = { [0] = CONFIG_RADIO_ZOLTRIX_PORT, + [1 ... (ZOLTRIX_MAX - 1)] = -1 }; +static int radio_nr[ZOLTRIX_MAX] = { [0 ... (ZOLTRIX_MAX - 1)] = -1 }; -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Zoltrix Radio Plus (0x20c or 0x30c)"); -module_param(radio_nr, int, 0); +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Zoltrix Radio Plus card (0x20c or 0x30c)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); struct zoltrix { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; + struct radio_isa_card isa; int curvol; - unsigned long curfreq; - int muted; - unsigned int stereo; - struct mutex lock; + bool muted; }; -static struct zoltrix zoltrix_card; +static struct radio_isa_card *zoltrix_alloc(void) +{ + struct zoltrix *zol = kzalloc(sizeof(*zol), GFP_KERNEL); + + return zol ? &zol->isa : NULL; +} -static int zol_setvol(struct zoltrix *zol, int vol) +static int zoltrix_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - zol->curvol = vol; - if (zol->muted) - return 0; + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); - mutex_lock(&zol->lock); - if (vol == 0) { - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); /* Zoltrix needs to be read to confirm */ - mutex_unlock(&zol->lock); + zol->curvol = vol; + zol->muted = mute; + if (mute || vol == 0) { + outb(0, isa->io); + outb(0, isa->io); + inb(isa->io + 3); /* Zoltrix needs to be read to confirm */ return 0; } - outb(zol->curvol-1, zol->io); + outb(vol - 1, isa->io); msleep(10); - inb(zol->io + 2); - mutex_unlock(&zol->lock); + inb(isa->io + 2); return 0; } -static void zol_mute(struct zoltrix *zol) -{ - zol->muted = 1; - mutex_lock(&zol->lock); - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); /* Zoltrix needs to be read to confirm */ - mutex_unlock(&zol->lock); -} - -static void zol_unmute(struct zoltrix *zol) -{ - zol->muted = 0; - zol_setvol(zol, zol->curvol); -} - -static int zol_setfreq(struct zoltrix *zol, unsigned long freq) +/* tunes the radio to the desired frequency */ +static int zoltrix_s_frequency(struct radio_isa_card *isa, u32 freq) { - /* tunes the radio to the desired frequency */ - struct v4l2_device *v4l2_dev = &zol->v4l2_dev; + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); + struct v4l2_device *v4l2_dev = &isa->v4l2_dev; unsigned long long bitmask, f, m; - unsigned int stereo = zol->stereo; + bool stereo = isa->stereo; int i; if (freq == 0) { @@ -125,340 +122,125 @@ static int zol_setfreq(struct zoltrix *zol, unsigned long freq) bitmask = 0xc480402c10080000ull; i = 45; - mutex_lock(&zol->lock); - - zol->curfreq = freq; - - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); /* Zoltrix needs to be read to confirm */ + outb(0, isa->io); + outb(0, isa->io); + inb(isa->io + 3); /* Zoltrix needs to be read to confirm */ - outb(0x40, zol->io); - outb(0xc0, zol->io); + outb(0x40, isa->io); + outb(0xc0, isa->io); bitmask = (bitmask ^ ((f & 0xff) << 47) ^ ((f & 0xff00) << 30) ^ (stereo << 31)); while (i--) { if ((bitmask & 0x8000000000000000ull) != 0) { - outb(0x80, zol->io); + outb(0x80, isa->io); udelay(50); - outb(0x00, zol->io); + outb(0x00, isa->io); udelay(50); - outb(0x80, zol->io); + outb(0x80, isa->io); udelay(50); } else { - outb(0xc0, zol->io); + outb(0xc0, isa->io); udelay(50); - outb(0x40, zol->io); + outb(0x40, isa->io); udelay(50); - outb(0xc0, zol->io); + outb(0xc0, isa->io); udelay(50); } bitmask *= 2; } /* termination sequence */ - outb(0x80, zol->io); - outb(0xc0, zol->io); - outb(0x40, zol->io); + outb(0x80, isa->io); + outb(0xc0, isa->io); + outb(0x40, isa->io); udelay(1000); - inb(zol->io + 2); - + inb(isa->io + 2); udelay(1000); - if (zol->muted) { - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); - udelay(1000); - } - - mutex_unlock(&zol->lock); - - if (!zol->muted) - zol_setvol(zol, zol->curvol); - return 0; + return zoltrix_s_mute_volume(isa, zol->muted, zol->curvol); } /* Get signal strength */ -static int zol_getsigstr(struct zoltrix *zol) +static u32 zoltrix_g_rxsubchans(struct radio_isa_card *isa) { + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); int a, b; - mutex_lock(&zol->lock); - outb(0x00, zol->io); /* This stuff I found to do nothing */ - outb(zol->curvol, zol->io); + outb(0x00, isa->io); /* This stuff I found to do nothing */ + outb(zol->curvol, isa->io); msleep(20); - a = inb(zol->io); + a = inb(isa->io); msleep(10); - b = inb(zol->io); + b = inb(isa->io); - mutex_unlock(&zol->lock); - - if (a != b) - return 0; - - /* I found this out by playing with a binary scanner on the card io */ - return a == 0xcf || a == 0xdf || a == 0xef; + return (a == b && a == 0xcf) ? + V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; } -static int zol_is_stereo(struct zoltrix *zol) +static u32 zoltrix_g_signal(struct radio_isa_card *isa) { - int x1, x2; - - mutex_lock(&zol->lock); + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); + int a, b; - outb(0x00, zol->io); - outb(zol->curvol, zol->io); + outb(0x00, isa->io); /* This stuff I found to do nothing */ + outb(zol->curvol, isa->io); msleep(20); - x1 = inb(zol->io); + a = inb(isa->io); msleep(10); - x2 = inb(zol->io); - - mutex_unlock(&zol->lock); - - return x1 == x2 && x1 == 0xcf; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-zoltrix", sizeof(v->driver)); - strlcpy(v->card, "Zoltrix Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct zoltrix *zol = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 88 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (zol_is_stereo(zol)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * zol_getsigstr(zol); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct zoltrix *zol = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - if (zol_setfreq(zol, f->frequency) != 0) - return -EINVAL; - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct zoltrix *zol = video_drvdata(file); + b = inb(isa->io); - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = zol->curfreq; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 4096, 65535); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct zoltrix *zol = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = zol->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = zol->curvol * 4096; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct zoltrix *zol = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - zol_mute(zol); - else { - zol_unmute(zol); - zol_setvol(zol, zol->curvol); - } - return 0; - case V4L2_CID_AUDIO_VOLUME: - zol_setvol(zol, ctrl->value / 4096); + if (a != b) return 0; - } - zol->stereo = 1; - if (zol_setfreq(zol, zol->curfreq) != 0) - return -EINVAL; -#if 0 -/* FIXME: Implement stereo/mono switch on V4L2 */ - if (v->mode & VIDEO_SOUND_STEREO) { - zol->stereo = 1; - zol_setfreq(zol, zol->curfreq); - } - if (v->mode & VIDEO_SOUND_MONO) { - zol->stereo = 0; - zol_setfreq(zol, zol->curfreq); - } -#endif - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; + /* I found this out by playing with a binary scanner on the card io */ + return (a == 0xcf || a == 0xdf || a == 0xef) ? 0xffff : 0; } -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) +static int zoltrix_s_stereo(struct radio_isa_card *isa, bool stereo) { - return a->index ? -EINVAL : 0; + return zoltrix_s_frequency(isa, isa->freq); } -static const struct v4l2_file_operations zoltrix_fops = -{ - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops zoltrix_ops = { + .alloc = zoltrix_alloc, + .s_mute_volume = zoltrix_s_mute_volume, + .s_frequency = zoltrix_s_frequency, + .s_stereo = zoltrix_s_stereo, + .g_rxsubchans = zoltrix_g_rxsubchans, + .g_signal = zoltrix_g_signal, }; -static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int zoltrix_ioports[] = { 0x20c, 0x30c }; + +static struct radio_isa_driver zoltrix_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-zoltrix", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = zoltrix_ioports, + .num_of_io_ports = ARRAY_SIZE(zoltrix_ioports), + .region_size = 2, + .card = "Zoltrix Radio Plus", + .ops = &zoltrix_ops, + .has_stereo = true, + .max_volume = 15, }; static int __init zoltrix_init(void) { - struct zoltrix *zol = &zoltrix_card; - struct v4l2_device *v4l2_dev = &zol->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "zoltrix", sizeof(v4l2_dev->name)); - zol->io = io; - if (zol->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x20c or 0x30c\n"); - return -EINVAL; - } - if (zol->io != 0x20c && zol->io != 0x30c) { - v4l2_err(v4l2_dev, "invalid port, try 0x20c or 0x30c\n"); - return -ENXIO; - } - - if (!request_region(zol->io, 2, "zoltrix")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", zol->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(zol->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - mutex_init(&zol->lock); - - /* mute card - prevents noisy bootups */ - - /* this ensures that the volume is all the way down */ - - outb(0, zol->io); - outb(0, zol->io); - msleep(20); - inb(zol->io + 3); - - zol->curvol = 0; - zol->stereo = 1; - - strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name)); - zol->vdev.v4l2_dev = v4l2_dev; - zol->vdev.fops = &zoltrix_fops; - zol->vdev.ioctl_ops = &zoltrix_ioctl_ops; - zol->vdev.release = video_device_release_empty; - video_set_drvdata(&zol->vdev, zol); - - if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(zol->io, 2); - return -EINVAL; - } - v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n"); - - return 0; + return isa_register_driver(&zoltrix_driver.driver, ZOLTRIX_MAX); } static void __exit zoltrix_exit(void) { - struct zoltrix *zol = &zoltrix_card; - - video_unregister_device(&zol->vdev); - v4l2_device_unregister(&zol->v4l2_dev); - release_region(zol->io, 2); + isa_unregister_driver(&zoltrix_driver.driver); } module_init(zoltrix_init); diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c index b1193dfc5087..9474706350f8 100644 --- a/drivers/media/radio/saa7706h.c +++ b/drivers/media/radio/saa7706h.c @@ -434,18 +434,7 @@ static struct i2c_driver saa7706h_driver = { .id_table = saa7706h_id, }; -static __init int saa7706h_init(void) -{ - return i2c_add_driver(&saa7706h_driver); -} - -static __exit void saa7706h_exit(void) -{ - i2c_del_driver(&saa7706h_driver); -} - -module_init(saa7706h_init); -module_exit(saa7706h_exit); +module_i2c_driver(saa7706h_driver); MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver"); MODULE_AUTHOR("Mocean Laboratories"); diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index fd3541b0e91c..9b546a5523f3 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -539,33 +539,7 @@ static struct i2c_driver si470x_i2c_driver = { .id_table = si470x_i2c_id, }; - - -/************************************************************************** - * Module Interface - **************************************************************************/ - -/* - * si470x_i2c_init - module init - */ -static int __init si470x_i2c_init(void) -{ - printk(KERN_INFO DRIVER_DESC ", Version " DRIVER_VERSION "\n"); - return i2c_add_driver(&si470x_i2c_driver); -} - - -/* - * si470x_i2c_exit - module exit - */ -static void __exit si470x_i2c_exit(void) -{ - i2c_del_driver(&si470x_i2c_driver); -} - - -module_init(si470x_i2c_init); -module_exit(si470x_i2c_exit); +module_i2c_driver(si470x_i2c_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c index 27aba936fb2b..b898c8925ab7 100644 --- a/drivers/media/radio/si4713-i2c.c +++ b/drivers/media/radio/si4713-i2c.c @@ -2106,17 +2106,4 @@ static struct i2c_driver si4713_i2c_driver = { .id_table = si4713_id, }; -/* Module Interface */ -static int __init si4713_module_init(void) -{ - return i2c_add_driver(&si4713_i2c_driver); -} - -static void __exit si4713_module_exit(void) -{ - i2c_del_driver(&si4713_i2c_driver); -} - -module_init(si4713_module_init); -module_exit(si4713_module_exit); - +module_i2c_driver(si4713_i2c_driver); diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c index 3408685b690c..6418c4c9faf1 100644 --- a/drivers/media/radio/tef6862.c +++ b/drivers/media/radio/tef6862.c @@ -215,20 +215,8 @@ static struct i2c_driver tef6862_driver = { .id_table = tef6862_id, }; -static __init int tef6862_init(void) -{ - return i2c_add_driver(&tef6862_driver); -} - -static __exit void tef6862_exit(void) -{ - i2c_del_driver(&tef6862_driver); -} - -module_init(tef6862_init); -module_exit(tef6862_exit); +module_i2c_driver(tef6862_driver); MODULE_DESCRIPTION("TEF6862 Car Radio Enhanced Selectivity Tuner"); MODULE_AUTHOR("Mocean Laboratories"); MODULE_LICENSE("GPL v2"); - diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 4df4affeea5f..a3fbb21350e9 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -266,4 +266,13 @@ config RC_LOOPBACK To compile this driver as a module, choose M here: the module will be called rc_loopback. +config IR_GPIO_CIR + tristate "GPIO IR remote control" + depends on RC_CORE + ---help--- + Say Y if you want to use GPIO based IR Receiver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-recv. + endif #RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index fb3dee2dd845..29f364f88a94 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o obj-$(CONFIG_IR_STREAMZAP) += streamzap.o obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c index 7f7079b12f23..392d4be91f8f 100644 --- a/drivers/media/rc/fintek-cir.c +++ b/drivers/media/rc/fintek-cir.c @@ -117,7 +117,7 @@ static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset) static void cir_dump_regs(struct fintek_dev *fintek) { fintek_config_mode_enable(fintek); - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); pr_reg("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME); pr_reg(" * CR CIR BASE ADDR: 0x%x\n", @@ -143,7 +143,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek) u8 chip_major, chip_minor; u8 vendor_major, vendor_minor; u8 portsel, ir_class; - u16 vendor; + u16 vendor, chip; int ret = 0; fintek_config_mode_enable(fintek); @@ -176,6 +176,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek) chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI); chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO); + chip = chip_major << 8 | chip_minor; vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI); vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO); @@ -192,6 +193,15 @@ static int fintek_hw_detect(struct fintek_dev *fintek) fintek->chip_major = chip_major; fintek->chip_minor = chip_minor; fintek->chip_vendor = vendor; + + /* + * Newer reviews of this chipset uses port 8 instead of 5 + */ + if ((chip != 0x0408) || (chip != 0x0804)) + fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2; + else + fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1; + spin_unlock_irqrestore(&fintek->fintek_lock, flags); return ret; @@ -200,7 +210,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek) static void fintek_cir_ldev_init(struct fintek_dev *fintek) { /* Select CIR logical device and enable */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); /* Write allocated CIR address and IRQ information to hardware */ @@ -381,7 +391,7 @@ static irqreturn_t fintek_cir_isr(int irq, void *data) fit_dbg_verbose("%s firing", __func__); fintek_config_mode_enable(fintek); - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_config_mode_disable(fintek); /* @@ -422,7 +432,7 @@ static void fintek_enable_cir(struct fintek_dev *fintek) fintek_config_mode_enable(fintek); /* enable the CIR logical device */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); @@ -439,7 +449,7 @@ static void fintek_disable_cir(struct fintek_dev *fintek) fintek_config_mode_enable(fintek); /* disable the CIR logical device */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); @@ -611,7 +621,7 @@ static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state) fintek_config_mode_enable(fintek); /* disable cir logical dev */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); @@ -634,7 +644,7 @@ static int fintek_resume(struct pnp_dev *pdev) /* Enable CIR logical device */ fintek_config_mode_enable(fintek); - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); diff --git a/drivers/media/rc/fintek-cir.h b/drivers/media/rc/fintek-cir.h index 1b10b2011f5e..82516a1d39b0 100644 --- a/drivers/media/rc/fintek-cir.h +++ b/drivers/media/rc/fintek-cir.h @@ -88,6 +88,7 @@ struct fintek_dev { u8 chip_major; u8 chip_minor; u16 chip_vendor; + u8 logical_dev_cir; /* hardware features */ bool hw_learning_capable; @@ -172,7 +173,8 @@ struct fintek_dev { #define LOGICAL_DEV_ENABLE 0x01 /* Logical device number of the CIR function */ -#define LOGICAL_DEV_CIR 0x05 +#define LOGICAL_DEV_CIR_REV1 0x05 +#define LOGICAL_DEV_CIR_REV2 0x08 /* CIR Logical Device (LDN 0x08) config registers */ #define CIR_CR_COMMAND_INDEX 0x04 diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c new file mode 100644 index 000000000000..0d875450c5ce --- /dev/null +++ b/drivers/media/rc/gpio-ir-recv.c @@ -0,0 +1,205 @@ +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <media/rc-core.h> +#include <media/gpio-ir-recv.h> + +#define GPIO_IR_DRIVER_NAME "gpio-rc-recv" +#define GPIO_IR_DEVICE_NAME "gpio_ir_recv" + +struct gpio_rc_dev { + struct rc_dev *rcdev; + int gpio_nr; + bool active_low; +}; + +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id) +{ + struct gpio_rc_dev *gpio_dev = dev_id; + int gval; + int rc = 0; + enum raw_event_type type = IR_SPACE; + + gval = gpio_get_value_cansleep(gpio_dev->gpio_nr); + + if (gval < 0) + goto err_get_value; + + if (gpio_dev->active_low) + gval = !gval; + + if (gval == 1) + type = IR_PULSE; + + rc = ir_raw_event_store_edge(gpio_dev->rcdev, type); + if (rc < 0) + goto err_get_value; + + ir_raw_event_handle(gpio_dev->rcdev); + +err_get_value: + return IRQ_HANDLED; +} + +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev) +{ + struct gpio_rc_dev *gpio_dev; + struct rc_dev *rcdev; + const struct gpio_ir_recv_platform_data *pdata = + pdev->dev.platform_data; + int rc; + + if (!pdata) + return -EINVAL; + + if (pdata->gpio_nr < 0) + return -EINVAL; + + gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL); + if (!gpio_dev) + return -ENOMEM; + + rcdev = rc_allocate_device(); + if (!rcdev) { + rc = -ENOMEM; + goto err_allocate_device; + } + + rcdev->driver_type = RC_DRIVER_IR_RAW; + rcdev->allowed_protos = RC_TYPE_ALL; + rcdev->input_name = GPIO_IR_DEVICE_NAME; + rcdev->input_id.bustype = BUS_HOST; + rcdev->driver_name = GPIO_IR_DRIVER_NAME; + rcdev->map_name = RC_MAP_EMPTY; + + gpio_dev->rcdev = rcdev; + gpio_dev->gpio_nr = pdata->gpio_nr; + gpio_dev->active_low = pdata->active_low; + + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv"); + if (rc < 0) + goto err_gpio_request; + rc = gpio_direction_input(pdata->gpio_nr); + if (rc < 0) + goto err_gpio_direction_input; + + rc = rc_register_device(rcdev); + if (rc < 0) { + dev_err(&pdev->dev, "failed to register rc device\n"); + goto err_register_rc_device; + } + + platform_set_drvdata(pdev, gpio_dev); + + rc = request_any_context_irq(gpio_to_irq(pdata->gpio_nr), + gpio_ir_recv_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "gpio-ir-recv-irq", gpio_dev); + if (rc < 0) + goto err_request_irq; + + return 0; + +err_request_irq: + platform_set_drvdata(pdev, NULL); + rc_unregister_device(rcdev); +err_register_rc_device: +err_gpio_direction_input: + gpio_free(pdata->gpio_nr); +err_gpio_request: + rc_free_device(rcdev); + rcdev = NULL; +err_allocate_device: + kfree(gpio_dev); + return rc; +} + +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev) +{ + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); + + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev); + platform_set_drvdata(pdev, NULL); + rc_unregister_device(gpio_dev->rcdev); + gpio_free(gpio_dev->gpio_nr); + rc_free_device(gpio_dev->rcdev); + kfree(gpio_dev); + return 0; +} + +#ifdef CONFIG_PM +static int gpio_ir_recv_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) + enable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr)); + else + disable_irq(gpio_to_irq(gpio_dev->gpio_nr)); + + return 0; +} + +static int gpio_ir_recv_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) + disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr)); + else + enable_irq(gpio_to_irq(gpio_dev->gpio_nr)); + + return 0; +} + +static const struct dev_pm_ops gpio_ir_recv_pm_ops = { + .suspend = gpio_ir_recv_suspend, + .resume = gpio_ir_recv_resume, +}; +#endif + +static struct platform_driver gpio_ir_recv_driver = { + .probe = gpio_ir_recv_probe, + .remove = __devexit_p(gpio_ir_recv_remove), + .driver = { + .name = GPIO_IR_DRIVER_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &gpio_ir_recv_pm_ops, +#endif + }, +}; + +static int __init gpio_ir_recv_init(void) +{ + return platform_driver_register(&gpio_ir_recv_driver); +} +module_init(gpio_ir_recv_init); + +static void __exit gpio_ir_recv_exit(void) +{ + platform_driver_unregister(&gpio_ir_recv_driver); +} +module_exit(gpio_ir_recv_exit); + +MODULE_DESCRIPTION("GPIO IR Receiver driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c index d5e2b50aff1f..dab98b37621a 100644 --- a/drivers/media/rc/ir-sony-decoder.c +++ b/drivers/media/rc/ir-sony-decoder.c @@ -130,7 +130,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev) case 15: device = bitrev8((data->bits >> 0) & 0xFF); subdevice = 0; - function = bitrev8((data->bits >> 7) & 0xFD); + function = bitrev8((data->bits >> 7) & 0xFE); break; case 20: device = bitrev8((data->bits >> 5) & 0xF8); diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile index 36e4d5e8dd6a..49ce2662f56b 100644 --- a/drivers/media/rc/keymaps/Makefile +++ b/drivers/media/rc/keymaps/Makefile @@ -41,8 +41,11 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-imon-mce.o \ rc-imon-pad.o \ rc-iodata-bctv7e.o \ + rc-it913x-v1.o \ + rc-it913x-v2.o \ rc-kaiomy.o \ rc-kworld-315u.o \ + rc-kworld-pc150u.o \ rc-kworld-plus-tv-analog.o \ rc-leadtek-y04g0051.o \ rc-lirc.o \ diff --git a/drivers/media/rc/keymaps/rc-it913x-v1.c b/drivers/media/rc/keymaps/rc-it913x-v1.c new file mode 100644 index 000000000000..0ac775fd109d --- /dev/null +++ b/drivers/media/rc/keymaps/rc-it913x-v1.c @@ -0,0 +1,95 @@ +/* ITE Generic remotes Version 1 + * + * Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> +#include <linux/module.h> + + +static struct rc_map_table it913x_v1_rc[] = { + /* Type 1 */ + { 0x61d601, KEY_VIDEO }, /* Source */ + { 0x61d602, KEY_3 }, + { 0x61d603, KEY_POWER }, /* ShutDown */ + { 0x61d604, KEY_1 }, + { 0x61d605, KEY_5 }, + { 0x61d606, KEY_6 }, + { 0x61d607, KEY_CHANNELDOWN }, /* CH- */ + { 0x61d608, KEY_2 }, + { 0x61d609, KEY_CHANNELUP }, /* CH+ */ + { 0x61d60a, KEY_9 }, + { 0x61d60b, KEY_ZOOM }, /* Zoom */ + { 0x61d60c, KEY_7 }, + { 0x61d60d, KEY_8 }, + { 0x61d60e, KEY_VOLUMEUP }, /* Vol+ */ + { 0x61d60f, KEY_4 }, + { 0x61d610, KEY_ESC }, /* [back up arrow] */ + { 0x61d611, KEY_0 }, + { 0x61d612, KEY_OK }, /* [enter arrow] */ + { 0x61d613, KEY_VOLUMEDOWN }, /* Vol- */ + { 0x61d614, KEY_RECORD }, /* Rec */ + { 0x61d615, KEY_STOP }, /* Stop */ + { 0x61d616, KEY_PLAY }, /* Play */ + { 0x61d617, KEY_MUTE }, /* Mute */ + { 0x61d618, KEY_UP }, + { 0x61d619, KEY_DOWN }, + { 0x61d61a, KEY_LEFT }, + { 0x61d61b, KEY_RIGHT }, + { 0x61d61c, KEY_RED }, + { 0x61d61d, KEY_GREEN }, + { 0x61d61e, KEY_YELLOW }, + { 0x61d61f, KEY_BLUE }, + { 0x61d643, KEY_POWER2 }, /* [red power button] */ + /* Type 2 - 20 buttons */ + { 0x807f0d, KEY_0 }, + { 0x807f04, KEY_1 }, + { 0x807f05, KEY_2 }, + { 0x807f06, KEY_3 }, + { 0x807f07, KEY_4 }, + { 0x807f08, KEY_5 }, + { 0x807f09, KEY_6 }, + { 0x807f0a, KEY_7 }, + { 0x807f1b, KEY_8 }, + { 0x807f1f, KEY_9 }, + { 0x807f12, KEY_POWER }, + { 0x807f01, KEY_MEDIA_REPEAT}, /* Recall */ + { 0x807f19, KEY_PAUSE }, /* Timeshift */ + { 0x807f1e, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ + { 0x807f03, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ + { 0x807f1a, KEY_CHANNELUP }, + { 0x807f02, KEY_CHANNELDOWN }, + { 0x807f0c, KEY_ZOOM }, + { 0x807f00, KEY_RECORD }, + { 0x807f0e, KEY_STOP }, +}; + +static struct rc_map_list it913x_v1_map = { + .map = { + .scan = it913x_v1_rc, + .size = ARRAY_SIZE(it913x_v1_rc), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_IT913X_V1, + } +}; + +static int __init init_rc_it913x_v1_map(void) +{ + return rc_map_register(&it913x_v1_map); +} + +static void __exit exit_rc_it913x_v1_map(void) +{ + rc_map_unregister(&it913x_v1_map); +} + +module_init(init_rc_it913x_v1_map) +module_exit(exit_rc_it913x_v1_map) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); diff --git a/drivers/media/rc/keymaps/rc-it913x-v2.c b/drivers/media/rc/keymaps/rc-it913x-v2.c new file mode 100644 index 000000000000..28e376e18b99 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-it913x-v2.c @@ -0,0 +1,94 @@ +/* ITE Generic remotes Version 2 + * + * Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> +#include <linux/module.h> + + +static struct rc_map_table it913x_v2_rc[] = { + /* Type 1 */ + /* 9005 remote */ + { 0x807f12, KEY_POWER2 }, /* Power (RED POWER BUTTON)*/ + { 0x807f1a, KEY_VIDEO }, /* Source */ + { 0x807f1e, KEY_MUTE }, /* Mute */ + { 0x807f01, KEY_RECORD }, /* Record */ + { 0x807f02, KEY_CHANNELUP }, /* Channel+ */ + { 0x807f03, KEY_TIME }, /* TimeShift */ + { 0x807f04, KEY_VOLUMEUP }, /* Volume- */ + { 0x807f05, KEY_SCREEN }, /* FullScreen */ + { 0x807f06, KEY_VOLUMEDOWN }, /* Volume- */ + { 0x807f07, KEY_0 }, /* 0 */ + { 0x807f08, KEY_CHANNELDOWN }, /* Channel- */ + { 0x807f09, KEY_PREVIOUS }, /* Recall */ + { 0x807f0a, KEY_1 }, /* 1 */ + { 0x807f1b, KEY_2 }, /* 2 */ + { 0x807f1f, KEY_3 }, /* 3 */ + { 0x807f0c, KEY_4 }, /* 4 */ + { 0x807f0d, KEY_5 }, /* 5 */ + { 0x807f0e, KEY_6 }, /* 6 */ + { 0x807f00, KEY_7 }, /* 7 */ + { 0x807f0f, KEY_8 }, /* 8 */ + { 0x807f19, KEY_9 }, /* 9 */ + + /* Type 2 */ + /* keys stereo, snapshot unassigned */ + { 0x866b00, KEY_0 }, + { 0x866b1b, KEY_1 }, + { 0x866b02, KEY_2 }, + { 0x866b03, KEY_3 }, + { 0x866b04, KEY_4 }, + { 0x866b05, KEY_5 }, + { 0x866b06, KEY_6 }, + { 0x866b07, KEY_7 }, + { 0x866b08, KEY_8 }, + { 0x866b09, KEY_9 }, + { 0x866b12, KEY_POWER }, + { 0x866b13, KEY_MUTE }, + { 0x866b0a, KEY_PREVIOUS }, /* Recall */ + { 0x866b1e, KEY_PAUSE }, + { 0x866b0c, KEY_VOLUMEUP }, + { 0x866b18, KEY_VOLUMEDOWN }, + { 0x866b0b, KEY_CHANNELUP }, + { 0x866b18, KEY_CHANNELDOWN }, + { 0x866b10, KEY_ZOOM }, + { 0x866b1d, KEY_RECORD }, + { 0x866b0e, KEY_STOP }, + { 0x866b11, KEY_EPG}, + { 0x866b1a, KEY_FASTFORWARD }, + { 0x866b0f, KEY_REWIND }, + { 0x866b1c, KEY_TV }, + { 0x866b1b, KEY_TEXT }, + +}; + +static struct rc_map_list it913x_v2_map = { + .map = { + .scan = it913x_v2_rc, + .size = ARRAY_SIZE(it913x_v2_rc), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_IT913X_V2, + } +}; + +static int __init init_rc_it913x_v2_map(void) +{ + return rc_map_register(&it913x_v2_map); +} + +static void __exit exit_rc_it913x_v2_map(void) +{ + rc_map_unregister(&it913x_v2_map); +} + +module_init(init_rc_it913x_v2_map) +module_exit(exit_rc_it913x_v2_map) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); diff --git a/drivers/media/rc/keymaps/rc-kworld-pc150u.c b/drivers/media/rc/keymaps/rc-kworld-pc150u.c new file mode 100644 index 000000000000..233bb5ee087f --- /dev/null +++ b/drivers/media/rc/keymaps/rc-kworld-pc150u.c @@ -0,0 +1,102 @@ +/* kworld-pc150u.c - Keytable for kworld_pc150u Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Kyle Strickland + * (based on kworld-plus-tv-analog.c by + * Mauro Carvalho Chehab <mchehab@redhat.com>) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> +#include <linux/module.h> + +/* Kworld PC150-U + Kyle Strickland <kyle@kyle.strickland.name> + */ + +static struct rc_map_table kworld_pc150u[] = { + { 0x0c, KEY_MEDIA }, /* Kworld key */ + { 0x16, KEY_EJECTCLOSECD }, /* -> ) */ + { 0x1d, KEY_POWER2 }, + + { 0x00, KEY_1 }, + { 0x01, KEY_2 }, + { 0x02, KEY_3 }, + { 0x03, KEY_4 }, + { 0x04, KEY_5 }, + { 0x05, KEY_6 }, + { 0x06, KEY_7 }, + { 0x07, KEY_8 }, + { 0x08, KEY_9 }, + { 0x0a, KEY_0 }, + + { 0x09, KEY_AGAIN }, + { 0x14, KEY_MUTE }, + + { 0x1e, KEY_LAST }, + { 0x17, KEY_ZOOM }, + { 0x1f, KEY_HOMEPAGE }, + { 0x0e, KEY_ESC }, + + { 0x20, KEY_UP }, + { 0x21, KEY_DOWN }, + { 0x42, KEY_LEFT }, + { 0x43, KEY_RIGHT }, + { 0x0b, KEY_ENTER }, + + { 0x10, KEY_CHANNELUP }, + { 0x11, KEY_CHANNELDOWN }, + + { 0x13, KEY_VOLUMEUP }, + { 0x12, KEY_VOLUMEDOWN }, + + { 0x19, KEY_TIME}, /* Timeshift */ + { 0x1a, KEY_STOP}, + { 0x1b, KEY_RECORD}, + { 0x4b, KEY_EMAIL}, + + { 0x40, KEY_REWIND}, + { 0x44, KEY_PLAYPAUSE}, + { 0x41, KEY_FORWARD}, + { 0x22, KEY_TEXT}, + + { 0x15, KEY_AUDIO}, /* ((*)) */ + { 0x0f, KEY_MODE}, /* display ratio */ + { 0x1c, KEY_SYSRQ}, /* snapshot */ + { 0x4a, KEY_SLEEP}, /* sleep timer */ + + { 0x48, KEY_SOUND}, /* switch theater mode */ + { 0x49, KEY_BLUE}, /* A */ + { 0x18, KEY_RED}, /* B */ + { 0x23, KEY_GREEN}, /* C */ +}; + +static struct rc_map_list kworld_pc150u_map = { + .map = { + .scan = kworld_pc150u, + .size = ARRAY_SIZE(kworld_pc150u), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_KWORLD_PC150U, + } +}; + +static int __init init_rc_map_kworld_pc150u(void) +{ + return rc_map_register(&kworld_pc150u_map); +} + +static void __exit exit_rc_map_kworld_pc150u(void) +{ + rc_map_unregister(&kworld_pc150u_map); +} + +module_init(init_rc_map_kworld_pc150u) +module_exit(exit_rc_map_kworld_pc150u) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kyle Strickland <kyle@kyle.strickland.name>"); diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c index f3b86c8db679..8d4dae2e2ece 100644 --- a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c +++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c @@ -18,6 +18,8 @@ */ static struct rc_map_table nec_terratec_cinergy_xs[] = { + + /* Terratec Grey IR, with most keys in orange */ { 0x1441, KEY_HOME}, { 0x1401, KEY_POWER2}, @@ -78,6 +80,56 @@ static struct rc_map_table nec_terratec_cinergy_xs[] = { { 0x144e, KEY_REWIND}, { 0x144f, KEY_FASTFORWARD}, { 0x145c, KEY_NEXT}, + + /* Terratec Black IR, with most keys in black */ + { 0x04eb01, KEY_POWER2}, + + { 0x04eb02, KEY_1}, + { 0x04eb03, KEY_2}, + { 0x04eb04, KEY_3}, + { 0x04eb05, KEY_4}, + { 0x04eb06, KEY_5}, + { 0x04eb07, KEY_6}, + { 0x04eb08, KEY_7}, + { 0x04eb09, KEY_8}, + { 0x04eb0a, KEY_9}, + { 0x04eb0c, KEY_0}, + + { 0x04eb0b, KEY_TEXT}, /* TXT */ + { 0x04eb0d, KEY_REFRESH}, /* Refresh */ + + { 0x04eb0e, KEY_HOME}, + { 0x04eb0f, KEY_EPG}, + + { 0x04eb10, KEY_UP}, + { 0x04eb11, KEY_LEFT}, + { 0x04eb12, KEY_OK}, + { 0x04eb13, KEY_RIGHT}, + { 0x04eb14, KEY_DOWN}, + + { 0x04eb15, KEY_BACKSPACE}, + { 0x04eb16, KEY_INFO}, + + { 0x04eb17, KEY_RED}, + { 0x04eb18, KEY_GREEN}, + { 0x04eb19, KEY_YELLOW}, + { 0x04eb1a, KEY_BLUE}, + + { 0x04eb1c, KEY_VOLUMEUP}, + { 0x04eb1e, KEY_VOLUMEDOWN}, + + { 0x04eb1d, KEY_MUTE}, + + { 0x04eb1b, KEY_CHANNELUP}, + { 0x04eb1f, KEY_CHANNELDOWN}, + + { 0x04eb40, KEY_RECORD}, + { 0x04eb4c, KEY_PLAY}, + { 0x04eb58, KEY_PAUSE}, + + { 0x04eb54, KEY_REWIND}, + { 0x04eb48, KEY_STOP}, + { 0x04eb5c, KEY_NEXT}, }; static struct rc_map_list nec_terratec_cinergy_xs_map = { diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 21105bf9594d..e150a2e29a4b 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -361,6 +361,8 @@ static struct usb_device_id mceusb_dev_table[] = { { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) }, /* Formosa Industrial Computing */ { USB_DEVICE(VENDOR_FORMOSA, 0xe03e) }, + /* Formosa Industrial Computing */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe042) }, /* Fintek eHome Infrared Transceiver (HP branded) */ { USB_DEVICE(VENDOR_FINTEK, 0x5168) }, /* Fintek eHome Infrared Transceiver */ diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index b72f8580e317..96f0a8bb39ea 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -35,7 +35,7 @@ struct ir_raw_event_ctrl { struct list_head list; /* to keep track of raw clients */ struct task_struct *thread; spinlock_t lock; - struct kfifo kfifo; /* fifo for the pulse/space durations */ + struct kfifo_rec_ptr_1 kfifo; /* fifo for the pulse/space durations */ ktime_t last_event; /* when last event occurred */ enum raw_event_type last_type; /* last event type */ struct rc_dev *dev; /* pointer to the parent rc_dev */ diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index f6a930b70c69..6e16b09c24a9 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1029,6 +1029,7 @@ EXPORT_SYMBOL_GPL(rc_free_device); int rc_register_device(struct rc_dev *dev) { + static bool raw_init = false; /* raw decoders loaded? */ static atomic_t devno = ATOMIC_INIT(0); struct rc_map *rc_map; const char *path; @@ -1103,6 +1104,12 @@ int rc_register_device(struct rc_dev *dev) kfree(path); if (dev->driver_type == RC_DRIVER_IR_RAW) { + /* Load raw decoders, if they aren't already */ + if (!raw_init) { + IR_dprintk(1, "Loading raw decoders\n"); + ir_raw_init(); + raw_init = true; + } rc = ir_raw_event_register(dev); if (rc < 0) goto out_input; @@ -1176,8 +1183,6 @@ static int __init rc_core_init(void) return rc; } - /* Initialize/load the decoders/keymap code that will be used */ - ir_raw_init(); rc_map_register(&empty_map); return 0; diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 9adada0d7447..f2479c5c0eb2 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -273,6 +273,16 @@ config VIDEO_ADV7180 To compile this driver as a module, choose M here: the module will be called adv7180. +config VIDEO_ADV7183 + tristate "Analog Devices ADV7183 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + V4l2 subdevice driver for the Analog Devices + ADV7183 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7183. + config VIDEO_BT819 tristate "BT819A VideoStream decoder" depends on VIDEO_V4L2 && I2C @@ -459,6 +469,9 @@ config VIDEO_AK881X comment "Camera sensor devices" +config VIDEO_APTINA_PLL + tristate + config VIDEO_OV7670 tristate "OmniVision OV7670 sensor support" depends on I2C && VIDEO_V4L2 @@ -467,9 +480,28 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_VS6624 + tristate "ST VS6624 sensor support" + depends on VIDEO_V4L2 && I2C + ---help--- + This is a Video4Linux2 sensor-level driver for the ST VS6624 + camera. + + To compile this driver as a module, choose M here: the + module will be called vs6624. + +config VIDEO_MT9M032 + tristate "MT9M032 camera sensor support" + depends on I2C && VIDEO_V4L2 + select VIDEO_APTINA_PLL + ---help--- + This driver supports MT9M032 camera sensors from Aptina, monochrome + models only. + config VIDEO_MT9P031 tristate "Aptina MT9P031 support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + select VIDEO_APTINA_PLL ---help--- This is a Video4Linux2 sensor-level driver for the Aptina (Micron) mt9p031 5 Mpixel camera. @@ -851,6 +883,8 @@ source "drivers/media/video/davinci/Kconfig" source "drivers/media/video/omap/Kconfig" +source "drivers/media/video/blackfin/Kconfig" + config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on VIDEO_DEV && ARCH_SHMOBILE @@ -1087,7 +1121,7 @@ config VIDEO_MX2_HOSTSUPPORT config VIDEO_MX2 tristate "i.MX27/i.MX25 Camera Sensor Interface driver" depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25) - select VIDEOBUF_DMA_CONTIG + select VIDEOBUF2_DMA_CONTIG select VIDEO_MX2_HOSTSUPPORT ---help--- This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor @@ -1116,7 +1150,8 @@ config VIDEO_ATMEL_ISI config VIDEO_S5P_MIPI_CSIS tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver" - depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P + depends on VIDEO_V4L2_SUBDEV_API && REGULATOR ---help--- This is a v4l2 driver for Samsung S5P/EXYNOS4 MIPI-CSI receiver. @@ -1176,4 +1211,14 @@ config VIDEO_SAMSUNG_S5P_MFC help MFC 5.1 driver for V4L2. +config VIDEO_MX2_EMMAPRP + tristate "MX2 eMMa-PrP support" + depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + MX2X chips have a PrP that can be used to process buffers from + memory to memory. Operations include resizing and format + conversion. + endif # V4L_MEM2MEM_DRIVERS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 354138804cda..a6282a3a6a82 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -12,16 +12,19 @@ omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \ v4l2-event.o v4l2-ctrls.o v4l2-subdev.o +ifeq ($(CONFIG_COMPAT),y) + videodev-objs += v4l2-compat-ioctl32.o +endif # V4L2 core modules obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o -ifeq ($(CONFIG_COMPAT),y) - obj-$(CONFIG_VIDEO_DEV) += v4l2-compat-ioctl32.o -endif - obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o +# Helper modules + +obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o + # All i2c modules must come first: obj-$(CONFIG_VIDEO_TUNER) += tuner.o @@ -40,8 +43,10 @@ obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o +obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o +obj-$(CONFIG_VIDEO_VS6624) += vs6624.o obj-$(CONFIG_VIDEO_BT819) += bt819.o obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o @@ -65,6 +70,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o @@ -177,6 +183,8 @@ obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o +obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o + obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ @@ -184,6 +192,8 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ +obj-$(CONFIG_BLACKFIN) += blackfin/ + obj-$(CONFIG_ARCH_DAVINCI) += davinci/ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o @@ -199,6 +209,6 @@ obj-y += davinci/ obj-$(CONFIG_ARCH_OMAP) += omap/ -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends -ccflags-y += -Idrivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/common/tuners diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c index 12eedf4d515a..5b045b4a66fe 100644 --- a/drivers/media/video/adp1653.c +++ b/drivers/media/video/adp1653.c @@ -33,7 +33,6 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/i2c.h> -#include <linux/module.h> #include <linux/slab.h> #include <linux/version.h> #include <media/adp1653.h> @@ -482,24 +481,7 @@ static struct i2c_driver adp1653_i2c_driver = { .id_table = adp1653_id_table, }; -static int __init adp1653_init(void) -{ - int rval; - - rval = i2c_add_driver(&adp1653_i2c_driver); - if (rval) - printk(KERN_ALERT "%s: failed at i2c_add_driver\n", __func__); - - return rval; -} - -static void __exit adp1653_exit(void) -{ - i2c_del_driver(&adp1653_i2c_driver); -} - -module_init(adp1653_init); -module_exit(adp1653_exit); +module_i2c_driver(adp1653_i2c_driver); MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index 879f1d839760..6bc01fb98ff8 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -407,15 +407,4 @@ static struct i2c_driver adv7170_driver = { .id_table = adv7170_id, }; -static __init int init_adv7170(void) -{ - return i2c_add_driver(&adv7170_driver); -} - -static __exit void exit_adv7170(void) -{ - i2c_del_driver(&adv7170_driver); -} - -module_init(init_adv7170); -module_exit(exit_adv7170); +module_i2c_driver(adv7170_driver); diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 206078eca853..c7640fab5730 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -457,15 +457,4 @@ static struct i2c_driver adv7175_driver = { .id_table = adv7175_id, }; -static __init int init_adv7175(void) -{ - return i2c_add_driver(&adv7175_driver); -} - -static __exit void exit_adv7175(void) -{ - i2c_del_driver(&adv7175_driver); -} - -module_init(init_adv7175); -module_exit(exit_adv7175); +module_i2c_driver(adv7175_driver); diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c index d2138d06bcad..b8b6c4b0cad4 100644 --- a/drivers/media/video/adv7180.c +++ b/drivers/media/video/adv7180.c @@ -444,20 +444,8 @@ static struct i2c_driver adv7180_driver = { .id_table = adv7180_id, }; -static __init int adv7180_init(void) -{ - return i2c_add_driver(&adv7180_driver); -} - -static __exit void adv7180_exit(void) -{ - i2c_del_driver(&adv7180_driver); -} - -module_init(adv7180_init); -module_exit(adv7180_exit); +module_i2c_driver(adv7180_driver); MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver"); MODULE_AUTHOR("Mocean Laboratories"); MODULE_LICENSE("GPL v2"); - diff --git a/drivers/media/video/adv7183.c b/drivers/media/video/adv7183.c new file mode 100644 index 000000000000..e1d4c89d7140 --- /dev/null +++ b/drivers/media/video/adv7183.c @@ -0,0 +1,699 @@ +/* + * adv7183.c Analog Devices ADV7183 video decoder driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/adv7183.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> + +#include "adv7183_regs.h" + +struct adv7183 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + + v4l2_std_id std; /* Current set standard */ + u32 input; + u32 output; + unsigned reset_pin; + unsigned oe_pin; + struct v4l2_mbus_framefmt fmt; +}; + +/* EXAMPLES USING 27 MHz CLOCK + * Mode 1 CVBS Input (Composite Video on AIN5) + * All standards are supported through autodetect, 8-bit, 4:2:2, ITU-R BT.656 output on P15 to P8. + */ +static const unsigned char adv7183_init_regs[] = { + ADV7183_IN_CTRL, 0x04, /* CVBS input on AIN5 */ + ADV7183_DIGI_CLAMP_CTRL_1, 0x00, /* Slow down digital clamps */ + ADV7183_SHAP_FILT_CTRL, 0x41, /* Set CSFM to SH1 */ + ADV7183_ADC_CTRL, 0x16, /* Power down ADC 1 and ADC 2 */ + ADV7183_CTI_DNR_CTRL_4, 0x04, /* Set DNR threshold to 4 for flat response */ + /* ADI recommended programming sequence */ + ADV7183_ADI_CTRL, 0x80, + ADV7183_CTI_DNR_CTRL_4, 0x20, + 0x52, 0x18, + 0x58, 0xED, + 0x77, 0xC5, + 0x7C, 0x93, + 0x7D, 0x00, + 0xD0, 0x48, + 0xD5, 0xA0, + 0xD7, 0xEA, + ADV7183_SD_SATURATION_CR, 0x3E, + ADV7183_PAL_V_END, 0x3E, + ADV7183_PAL_F_TOGGLE, 0x0F, + ADV7183_ADI_CTRL, 0x00, +}; + +static inline struct adv7183 *to_adv7183(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7183, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7183, hdl)->sd; +} + +static inline int adv7183_read(struct v4l2_subdev *sd, unsigned char reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int adv7183_write(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int adv7183_writeregs(struct v4l2_subdev *sd, + const unsigned char *regs, unsigned int num) +{ + unsigned char reg, data; + unsigned int cnt = 0; + + if (num & 0x1) { + v4l2_err(sd, "invalid regs array\n"); + return -1; + } + + while (cnt < num) { + reg = *regs++; + data = *regs++; + cnt += 2; + + adv7183_write(sd, reg, data); + } + return 0; +} + +static int adv7183_log_status(struct v4l2_subdev *sd) +{ + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_info(sd, "adv7183: Input control = 0x%02x\n", + adv7183_read(sd, ADV7183_IN_CTRL)); + v4l2_info(sd, "adv7183: Video selection = 0x%02x\n", + adv7183_read(sd, ADV7183_VD_SEL)); + v4l2_info(sd, "adv7183: Output control = 0x%02x\n", + adv7183_read(sd, ADV7183_OUT_CTRL)); + v4l2_info(sd, "adv7183: Extended output control = 0x%02x\n", + adv7183_read(sd, ADV7183_EXT_OUT_CTRL)); + v4l2_info(sd, "adv7183: Autodetect enable = 0x%02x\n", + adv7183_read(sd, ADV7183_AUTO_DET_EN)); + v4l2_info(sd, "adv7183: Contrast = 0x%02x\n", + adv7183_read(sd, ADV7183_CONTRAST)); + v4l2_info(sd, "adv7183: Brightness = 0x%02x\n", + adv7183_read(sd, ADV7183_BRIGHTNESS)); + v4l2_info(sd, "adv7183: Hue = 0x%02x\n", + adv7183_read(sd, ADV7183_HUE)); + v4l2_info(sd, "adv7183: Default value Y = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_Y)); + v4l2_info(sd, "adv7183: Default value C = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_C)); + v4l2_info(sd, "adv7183: ADI control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL)); + v4l2_info(sd, "adv7183: Power Management = 0x%02x\n", + adv7183_read(sd, ADV7183_POW_MANAGE)); + v4l2_info(sd, "adv7183: Status 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_STATUS_1), + adv7183_read(sd, ADV7183_STATUS_2), + adv7183_read(sd, ADV7183_STATUS_3)); + v4l2_info(sd, "adv7183: Ident = 0x%02x\n", + adv7183_read(sd, ADV7183_IDENT)); + v4l2_info(sd, "adv7183: Analog clamp control = 0x%02x\n", + adv7183_read(sd, ADV7183_ANAL_CLAMP_CTRL)); + v4l2_info(sd, "adv7183: Digital clamp control 1 = 0x%02x\n", + adv7183_read(sd, ADV7183_DIGI_CLAMP_CTRL_1)); + v4l2_info(sd, "adv7183: Shaping filter control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL), + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL_2)); + v4l2_info(sd, "adv7183: Comb filter control = 0x%02x\n", + adv7183_read(sd, ADV7183_COMB_FILT_CTRL)); + v4l2_info(sd, "adv7183: ADI control 2 = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL_2)); + v4l2_info(sd, "adv7183: Pixel delay control = 0x%02x\n", + adv7183_read(sd, ADV7183_PIX_DELAY_CTRL)); + v4l2_info(sd, "adv7183: Misc gain control = 0x%02x\n", + adv7183_read(sd, ADV7183_MISC_GAIN_CTRL)); + v4l2_info(sd, "adv7183: AGC mode control = 0x%02x\n", + adv7183_read(sd, ADV7183_AGC_MODE_CTRL)); + v4l2_info(sd, "adv7183: Chroma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Luma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Vsync field control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3)); + v4l2_info(sd, "adv7183: Hsync positon control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_HS_POS_CTRL_1), + adv7183_read(sd, ADV7183_HS_POS_CTRL_2), + adv7183_read(sd, ADV7183_HS_POS_CTRL_3)); + v4l2_info(sd, "adv7183: Polarity = 0x%02x\n", + adv7183_read(sd, ADV7183_POLARITY)); + v4l2_info(sd, "adv7183: ADC control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADC_CTRL)); + v4l2_info(sd, "adv7183: SD offset Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_OFFSET_CB), + adv7183_read(sd, ADV7183_SD_OFFSET_CR)); + v4l2_info(sd, "adv7183: SD saturation Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_SATURATION_CB), + adv7183_read(sd, ADV7183_SD_SATURATION_CR)); + v4l2_info(sd, "adv7183: Drive strength = 0x%02x\n", + adv7183_read(sd, ADV7183_DRIVE_STR)); + v4l2_ctrl_handler_log_status(&decoder->hdl, sd->name); + return 0; +} + +static int adv7183_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *std = decoder->std; + return 0; +} + +static int adv7183_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + if (std == V4L2_STD_PAL_60) + reg |= 0x60; + else if (std == V4L2_STD_NTSC_443) + reg |= 0x70; + else if (std == V4L2_STD_PAL_N) + reg |= 0x90; + else if (std == V4L2_STD_PAL_M) + reg |= 0xA0; + else if (std == V4L2_STD_PAL_Nc) + reg |= 0xC0; + else if (std & V4L2_STD_PAL) + reg |= 0x80; + else if (std & V4L2_STD_NTSC) + reg |= 0x50; + else if (std & V4L2_STD_SECAM) + reg |= 0xE0; + else + return -EINVAL; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + decoder->std = std; + + return 0; +} + +static int adv7183_reset(struct v4l2_subdev *sd, u32 val) +{ + int reg; + + reg = adv7183_read(sd, ADV7183_POW_MANAGE) | 0x80; + adv7183_write(sd, ADV7183_POW_MANAGE, reg); + /* wait 5ms before any further i2c writes are performed */ + usleep_range(5000, 10000); + return 0; +} + +static int adv7183_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + if ((input > ADV7183_COMPONENT1) || (output > ADV7183_16BIT_OUT)) + return -EINVAL; + + if (input != decoder->input) { + decoder->input = input; + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF0; + switch (input) { + case ADV7183_COMPOSITE1: + reg |= 0x1; + break; + case ADV7183_COMPOSITE2: + reg |= 0x2; + break; + case ADV7183_COMPOSITE3: + reg |= 0x3; + break; + case ADV7183_COMPOSITE4: + reg |= 0x4; + break; + case ADV7183_COMPOSITE5: + reg |= 0x5; + break; + case ADV7183_COMPOSITE6: + reg |= 0xB; + break; + case ADV7183_COMPOSITE7: + reg |= 0xC; + break; + case ADV7183_COMPOSITE8: + reg |= 0xD; + break; + case ADV7183_COMPOSITE9: + reg |= 0xE; + break; + case ADV7183_COMPOSITE10: + reg |= 0xF; + break; + case ADV7183_SVIDEO0: + reg |= 0x6; + break; + case ADV7183_SVIDEO1: + reg |= 0x7; + break; + case ADV7183_SVIDEO2: + reg |= 0x8; + break; + case ADV7183_COMPONENT0: + reg |= 0x9; + break; + case ADV7183_COMPONENT1: + reg |= 0xA; + break; + default: + break; + } + adv7183_write(sd, ADV7183_IN_CTRL, reg); + } + + if (output != decoder->output) { + decoder->output = output; + reg = adv7183_read(sd, ADV7183_OUT_CTRL) & 0xC0; + switch (output) { + case ADV7183_16BIT_OUT: + reg |= 0x9; + break; + default: + reg |= 0xC; + break; + } + adv7183_write(sd, ADV7183_OUT_CTRL, reg); + } + + return 0; +} + +static int adv7183_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + int val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (val < 0) + val = 127 - val; + adv7183_write(sd, ADV7183_BRIGHTNESS, val); + break; + case V4L2_CID_CONTRAST: + adv7183_write(sd, ADV7183_CONTRAST, val); + break; + case V4L2_CID_SATURATION: + adv7183_write(sd, ADV7183_SD_SATURATION_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_SATURATION_CR, (val & 0xFF)); + break; + case V4L2_CID_HUE: + adv7183_write(sd, ADV7183_SD_OFFSET_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_OFFSET_CR, (val & 0xFF)); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int adv7183_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + /* enable autodetection block */ + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + /* wait autodetection switch */ + mdelay(10); + + /* get autodetection result */ + reg = adv7183_read(sd, ADV7183_STATUS_1); + switch ((reg >> 0x4) & 0x7) { + case 0: + *std = V4L2_STD_NTSC; + break; + case 1: + *std = V4L2_STD_NTSC_443; + break; + case 2: + *std = V4L2_STD_PAL_M; + break; + case 3: + *std = V4L2_STD_PAL_60; + break; + case 4: + *std = V4L2_STD_PAL; + break; + case 5: + *std = V4L2_STD_SECAM; + break; + case 6: + *std = V4L2_STD_PAL_Nc; + break; + case 7: + *std = V4L2_STD_SECAM; + break; + default: + *std = V4L2_STD_UNKNOWN; + break; + } + + /* after std detection, write back user set std */ + adv7183_s_std(sd, decoder->std); + return 0; +} + +static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + int reg; + + *status = V4L2_IN_ST_NO_SIGNAL; + reg = adv7183_read(sd, ADV7183_STATUS_1); + if (reg < 0) + return reg; + if (reg & 0x1) + *status = 0; + return 0; +} + +static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index > 0) + return -EINVAL; + + *code = V4L2_MBUS_FMT_UYVY8_2X8; + return 0; +} + +static int adv7183_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + fmt->code = V4L2_MBUS_FMT_UYVY8_2X8; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + if (decoder->std & V4L2_STD_525_60) { + fmt->field = V4L2_FIELD_SEQ_TB; + fmt->width = 720; + fmt->height = 480; + } else { + fmt->field = V4L2_FIELD_SEQ_BT; + fmt->width = 720; + fmt->height = 576; + } + return 0; +} + +static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + adv7183_try_mbus_fmt(sd, fmt); + decoder->fmt = *fmt; + return 0; +} + +static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *fmt = decoder->fmt; + return 0; +} + +static int adv7183_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct adv7183 *decoder = to_adv7183(sd); + + if (enable) + gpio_direction_output(decoder->oe_pin, 0); + else + gpio_direction_output(decoder->oe_pin, 1); + udelay(1); + return 0; +} + +static int adv7183_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* 0x11 for adv7183, 0x13 for adv7183b */ + rev = adv7183_read(sd, ADV7183_IDENT); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7183, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int adv7183_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = adv7183_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int adv7183_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + adv7183_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops adv7183_ctrl_ops = { + .s_ctrl = adv7183_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7183_core_ops = { + .log_status = adv7183_log_status, + .g_std = adv7183_g_std, + .s_std = adv7183_s_std, + .reset = adv7183_reset, + .g_chip_ident = adv7183_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7183_g_register, + .s_register = adv7183_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops adv7183_video_ops = { + .s_routing = adv7183_s_routing, + .querystd = adv7183_querystd, + .g_input_status = adv7183_g_input_status, + .enum_mbus_fmt = adv7183_enum_mbus_fmt, + .try_mbus_fmt = adv7183_try_mbus_fmt, + .s_mbus_fmt = adv7183_s_mbus_fmt, + .g_mbus_fmt = adv7183_g_mbus_fmt, + .s_stream = adv7183_s_stream, +}; + +static const struct v4l2_subdev_ops adv7183_ops = { + .core = &adv7183_core_ops, + .video = &adv7183_video_ops, +}; + +static int adv7183_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7183 *decoder; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int ret; + struct v4l2_mbus_framefmt fmt; + const unsigned *pin_array; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + pin_array = client->dev.platform_data; + if (pin_array == NULL) + return -EINVAL; + + decoder = kzalloc(sizeof(struct adv7183), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + + decoder->reset_pin = pin_array[0]; + decoder->oe_pin = pin_array[1]; + + if (gpio_request(decoder->reset_pin, "ADV7183 Reset")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin); + ret = -EBUSY; + goto err_free_decoder; + } + + if (gpio_request(decoder->oe_pin, "ADV7183 Output Enable")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin); + ret = -EBUSY; + goto err_free_reset; + } + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7183_ops); + + hdl = &decoder->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x80); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFFFF, 1, 0x8080); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_HUE, 0, 0xFFFF, 1, 0x8080); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + ret = hdl->error; + + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + /* v4l2 doesn't support an autodetect standard, pick PAL as default */ + decoder->std = V4L2_STD_PAL; + decoder->input = ADV7183_COMPOSITE4; + decoder->output = ADV7183_8BIT_OUT; + + gpio_direction_output(decoder->oe_pin, 1); + /* reset chip */ + gpio_direction_output(decoder->reset_pin, 0); + /* reset pulse width at least 5ms */ + mdelay(10); + gpio_direction_output(decoder->reset_pin, 1); + /* wait 5ms before any further i2c writes are performed */ + mdelay(5); + + adv7183_writeregs(sd, adv7183_init_regs, ARRAY_SIZE(adv7183_init_regs)); + adv7183_s_std(sd, decoder->std); + fmt.width = 720; + fmt.height = 576; + adv7183_s_mbus_fmt(sd, &fmt); + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + return 0; +err_free_oe: + gpio_free(decoder->oe_pin); +err_free_reset: + gpio_free(decoder->reset_pin); +err_free_decoder: + kfree(decoder); + return ret; +} + +static int adv7183_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(decoder->oe_pin); + gpio_free(decoder->reset_pin); + kfree(decoder); + return 0; +} + +static const struct i2c_device_id adv7183_id[] = { + {"adv7183", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, adv7183_id); + +static struct i2c_driver adv7183_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7183", + }, + .probe = adv7183_probe, + .remove = __devexit_p(adv7183_remove), + .id_table = adv7183_id, +}; + +static __init int adv7183_init(void) +{ + return i2c_add_driver(&adv7183_driver); +} + +static __exit void adv7183_exit(void) +{ + i2c_del_driver(&adv7183_driver); +} + +module_init(adv7183_init); +module_exit(adv7183_exit); + +MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/adv7183_regs.h b/drivers/media/video/adv7183_regs.h new file mode 100644 index 000000000000..4a5b7d211d2f --- /dev/null +++ b/drivers/media/video/adv7183_regs.h @@ -0,0 +1,107 @@ +/* + * adv7183 - Analog Devices ADV7183 video decoder registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ADV7183_REGS_H_ +#define _ADV7183_REGS_H_ + +#define ADV7183_IN_CTRL 0x00 /* Input control */ +#define ADV7183_VD_SEL 0x01 /* Video selection */ +#define ADV7183_OUT_CTRL 0x03 /* Output control */ +#define ADV7183_EXT_OUT_CTRL 0x04 /* Extended output control */ +#define ADV7183_AUTO_DET_EN 0x07 /* Autodetect enable */ +#define ADV7183_CONTRAST 0x08 /* Contrast */ +#define ADV7183_BRIGHTNESS 0x0A /* Brightness */ +#define ADV7183_HUE 0x0B /* Hue */ +#define ADV7183_DEF_Y 0x0C /* Default value Y */ +#define ADV7183_DEF_C 0x0D /* Default value C */ +#define ADV7183_ADI_CTRL 0x0E /* ADI control */ +#define ADV7183_POW_MANAGE 0x0F /* Power Management */ +#define ADV7183_STATUS_1 0x10 /* Status 1 */ +#define ADV7183_IDENT 0x11 /* Ident */ +#define ADV7183_STATUS_2 0x12 /* Status 2 */ +#define ADV7183_STATUS_3 0x13 /* Status 3 */ +#define ADV7183_ANAL_CLAMP_CTRL 0x14 /* Analog clamp control */ +#define ADV7183_DIGI_CLAMP_CTRL_1 0x15 /* Digital clamp control 1 */ +#define ADV7183_SHAP_FILT_CTRL 0x17 /* Shaping filter control */ +#define ADV7183_SHAP_FILT_CTRL_2 0x18 /* Shaping filter control 2 */ +#define ADV7183_COMB_FILT_CTRL 0x19 /* Comb filter control */ +#define ADV7183_ADI_CTRL_2 0x1D /* ADI control 2 */ +#define ADV7183_PIX_DELAY_CTRL 0x27 /* Pixel delay control */ +#define ADV7183_MISC_GAIN_CTRL 0x2B /* Misc gain control */ +#define ADV7183_AGC_MODE_CTRL 0x2C /* AGC mode control */ +#define ADV7183_CHRO_GAIN_CTRL_1 0x2D /* Chroma gain control 1 */ +#define ADV7183_CHRO_GAIN_CTRL_2 0x2E /* Chroma gain control 2 */ +#define ADV7183_LUMA_GAIN_CTRL_1 0x2F /* Luma gain control 1 */ +#define ADV7183_LUMA_GAIN_CTRL_2 0x30 /* Luma gain control 2 */ +#define ADV7183_VS_FIELD_CTRL_1 0x31 /* Vsync field control 1 */ +#define ADV7183_VS_FIELD_CTRL_2 0x32 /* Vsync field control 2 */ +#define ADV7183_VS_FIELD_CTRL_3 0x33 /* Vsync field control 3 */ +#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync positon control 1 */ +#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync positon control 2 */ +#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync positon control 3 */ +#define ADV7183_POLARITY 0x37 /* Polarity */ +#define ADV7183_NTSC_COMB_CTRL 0x38 /* NTSC comb control */ +#define ADV7183_PAL_COMB_CTRL 0x39 /* PAL comb control */ +#define ADV7183_ADC_CTRL 0x3A /* ADC control */ +#define ADV7183_MAN_WIN_CTRL 0x3D /* Manual window control */ +#define ADV7183_RESAMPLE_CTRL 0x41 /* Resample control */ +#define ADV7183_GEMSTAR_CTRL_1 0x48 /* Gemstar ctrl 1 */ +#define ADV7183_GEMSTAR_CTRL_2 0x49 /* Gemstar ctrl 2 */ +#define ADV7183_GEMSTAR_CTRL_3 0x4A /* Gemstar ctrl 3 */ +#define ADV7183_GEMSTAR_CTRL_4 0x4B /* Gemstar ctrl 4 */ +#define ADV7183_GEMSTAR_CTRL_5 0x4C /* Gemstar ctrl 5 */ +#define ADV7183_CTI_DNR_CTRL_1 0x4D /* CTI DNR ctrl 1 */ +#define ADV7183_CTI_DNR_CTRL_2 0x4E /* CTI DNR ctrl 2 */ +#define ADV7183_CTI_DNR_CTRL_4 0x50 /* CTI DNR ctrl 4 */ +#define ADV7183_LOCK_CNT 0x51 /* Lock count */ +#define ADV7183_FREE_LINE_LEN 0x8F /* Free-Run line length 1 */ +#define ADV7183_VBI_INFO 0x90 /* VBI info */ +#define ADV7183_WSS_1 0x91 /* WSS 1 */ +#define ADV7183_WSS_2 0x92 /* WSS 2 */ +#define ADV7183_EDTV_1 0x93 /* EDTV 1 */ +#define ADV7183_EDTV_2 0x94 /* EDTV 2 */ +#define ADV7183_EDTV_3 0x95 /* EDTV 3 */ +#define ADV7183_CGMS_1 0x96 /* CGMS 1 */ +#define ADV7183_CGMS_2 0x97 /* CGMS 2 */ +#define ADV7183_CGMS_3 0x98 /* CGMS 3 */ +#define ADV7183_CCAP_1 0x99 /* CCAP 1 */ +#define ADV7183_CCAP_2 0x9A /* CCAP 2 */ +#define ADV7183_LETTERBOX_1 0x9B /* Letterbox 1 */ +#define ADV7183_LETTERBOX_2 0x9C /* Letterbox 2 */ +#define ADV7183_LETTERBOX_3 0x9D /* Letterbox 3 */ +#define ADV7183_CRC_EN 0xB2 /* CRC enable */ +#define ADV7183_ADC_SWITCH_1 0xC3 /* ADC switch 1 */ +#define ADV7183_ADC_SWITCH_2 0xC4 /* ADC swithc 2 */ +#define ADV7183_LETTERBOX_CTRL_1 0xDC /* Letterbox control 1 */ +#define ADV7183_LETTERBOX_CTRL_2 0xDD /* Letterbox control 2 */ +#define ADV7183_SD_OFFSET_CB 0xE1 /* SD offset Cb */ +#define ADV7183_SD_OFFSET_CR 0xE2 /* SD offset Cr */ +#define ADV7183_SD_SATURATION_CB 0xE3 /* SD saturation Cb */ +#define ADV7183_SD_SATURATION_CR 0xE4 /* SD saturation Cr */ +#define ADV7183_NTSC_V_BEGIN 0xE5 /* NTSC V bit begin */ +#define ADV7183_NTSC_V_END 0xE6 /* NTSC V bit end */ +#define ADV7183_NTSC_F_TOGGLE 0xE7 /* NTSC F bit toggle */ +#define ADV7183_PAL_V_BEGIN 0xE8 /* PAL V bit begin */ +#define ADV7183_PAL_V_END 0xE9 /* PAL V bit end */ +#define ADV7183_PAL_F_TOGGLE 0xEA /* PAL F bit toggle */ +#define ADV7183_DRIVE_STR 0xF4 /* Drive strength */ +#define ADV7183_IF_COMP_CTRL 0xF8 /* IF comp control */ +#define ADV7183_VS_MODE_CTRL 0xF9 /* VS mode control */ + +#endif diff --git a/drivers/media/video/adv7343.c b/drivers/media/video/adv7343.c index 021fab23070d..119b60401bf3 100644 --- a/drivers/media/video/adv7343.c +++ b/drivers/media/video/adv7343.c @@ -475,15 +475,4 @@ static struct i2c_driver adv7343_driver = { .id_table = adv7343_id, }; -static __init int init_adv7343(void) -{ - return i2c_add_driver(&adv7343_driver); -} - -static __exit void exit_adv7343(void) -{ - i2c_del_driver(&adv7343_driver); -} - -module_init(init_adv7343); -module_exit(exit_adv7343); +module_i2c_driver(adv7343_driver); diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c index 53c496c00fb6..ba674656b10d 100644 --- a/drivers/media/video/ak881x.c +++ b/drivers/media/video/ak881x.c @@ -352,18 +352,7 @@ static struct i2c_driver ak881x_i2c_driver = { .id_table = ak881x_id, }; -static int __init ak881x_module_init(void) -{ - return i2c_add_driver(&ak881x_i2c_driver); -} - -static void __exit ak881x_module_exit(void) -{ - i2c_del_driver(&ak881x_i2c_driver); -} - -module_init(ak881x_module_init); -module_exit(ak881x_module_exit); +module_i2c_driver(ak881x_i2c_driver); MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814"); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); diff --git a/drivers/media/video/aptina-pll.c b/drivers/media/video/aptina-pll.c new file mode 100644 index 000000000000..0bd3813bb59d --- /dev/null +++ b/drivers/media/video/aptina-pll.c @@ -0,0 +1,174 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/gcd.h> +#include <linux/kernel.h> +#include <linux/lcm.h> +#include <linux/module.h> + +#include "aptina-pll.h" + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll) +{ + unsigned int mf_min; + unsigned int mf_max; + unsigned int p1_min; + unsigned int p1_max; + unsigned int p1; + unsigned int div; + + dev_dbg(dev, "PLL: ext clock %u pix clock %u\n", + pll->ext_clock, pll->pix_clock); + + if (pll->ext_clock < limits->ext_clock_min || + pll->ext_clock > limits->ext_clock_max) { + dev_err(dev, "pll: invalid external clock frequency.\n"); + return -EINVAL; + } + + if (pll->pix_clock == 0 || pll->pix_clock > limits->pix_clock_max) { + dev_err(dev, "pll: invalid pixel clock frequency.\n"); + return -EINVAL; + } + + /* Compute the multiplier M and combined N*P1 divisor. */ + div = gcd(pll->pix_clock, pll->ext_clock); + pll->m = pll->pix_clock / div; + div = pll->ext_clock / div; + + /* We now have the smallest M and N*P1 values that will result in the + * desired pixel clock frequency, but they might be out of the valid + * range. Compute the factor by which we should multiply them given the + * following constraints: + * + * - minimum/maximum multiplier + * - minimum/maximum multiplier output clock frequency assuming the + * minimum/maximum N value + * - minimum/maximum combined N*P1 divisor + */ + mf_min = DIV_ROUND_UP(limits->m_min, pll->m); + mf_min = max(mf_min, limits->out_clock_min / + (pll->ext_clock / limits->n_min * pll->m)); + mf_min = max(mf_min, limits->n_min * limits->p1_min / div); + mf_max = limits->m_max / pll->m; + mf_max = min(mf_max, limits->out_clock_max / + (pll->ext_clock / limits->n_max * pll->m)); + mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div)); + + dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max); + if (mf_min > mf_max) { + dev_err(dev, "pll: no valid combined N*P1 divisor.\n"); + return -EINVAL; + } + + /* + * We're looking for the highest acceptable P1 value for which a + * multiplier factor MF exists that fulfills the following conditions: + * + * 1. p1 is in the [p1_min, p1_max] range given by the limits and is + * even + * 2. mf is in the [mf_min, mf_max] range computed above + * 3. div * mf is a multiple of p1, in order to compute + * n = div * mf / p1 + * m = pll->m * mf + * 4. the internal clock frequency, given by ext_clock / n, is in the + * [int_clock_min, int_clock_max] range given by the limits + * 5. the output clock frequency, given by ext_clock / n * m, is in the + * [out_clock_min, out_clock_max] range given by the limits + * + * The first naive approach is to iterate over all p1 values acceptable + * according to (1) and all mf values acceptable according to (2), and + * stop at the first combination that fulfills (3), (4) and (5). This + * has a O(n^2) complexity. + * + * Instead of iterating over all mf values in the [mf_min, mf_max] range + * we can compute the mf increment between two acceptable values + * according to (3) with + * + * mf_inc = p1 / gcd(div, p1) (6) + * + * and round the minimum up to the nearest multiple of mf_inc. This will + * restrict the number of mf values to be checked. + * + * Furthermore, conditions (4) and (5) only restrict the range of + * acceptable p1 and mf values by modifying the minimum and maximum + * limits. (5) can be expressed as + * + * ext_clock / (div * mf / p1) * m * mf >= out_clock_min + * ext_clock / (div * mf / p1) * m * mf <= out_clock_max + * + * or + * + * p1 >= out_clock_min * div / (ext_clock * m) (7) + * p1 <= out_clock_max * div / (ext_clock * m) + * + * Similarly, (4) can be expressed as + * + * mf >= ext_clock * p1 / (int_clock_max * div) (8) + * mf <= ext_clock * p1 / (int_clock_min * div) + * + * We can thus iterate over the restricted p1 range defined by the + * combination of (1) and (7), and then compute the restricted mf range + * defined by the combination of (2), (6) and (8). If the resulting mf + * range is not empty, any value in the mf range is acceptable. We thus + * select the mf lwoer bound and the corresponding p1 value. + */ + if (limits->p1_min == 0) { + dev_err(dev, "pll: P1 minimum value must be >0.\n"); + return -EINVAL; + } + + p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div, + pll->ext_clock * pll->m)); + p1_max = min(limits->p1_max, limits->out_clock_max * div / + (pll->ext_clock * pll->m)); + + for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) { + unsigned int mf_inc = p1 / gcd(div, p1); + unsigned int mf_high; + unsigned int mf_low; + + mf_low = max(roundup(mf_min, mf_inc), + DIV_ROUND_UP(pll->ext_clock * p1, + limits->int_clock_max * div)); + mf_high = min(mf_max, pll->ext_clock * p1 / + (limits->int_clock_min * div)); + + if (mf_low > mf_high) + continue; + + pll->n = div * mf_low / p1; + pll->m *= mf_low; + pll->p1 = p1; + dev_dbg(dev, "PLL: N %u M %u P1 %u\n", pll->n, pll->m, pll->p1); + return 0; + } + + dev_err(dev, "pll: no valid N and P1 divisors found.\n"); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(aptina_pll_calculate); + +MODULE_DESCRIPTION("Aptina PLL Helpers"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/aptina-pll.h b/drivers/media/video/aptina-pll.h new file mode 100644 index 000000000000..b370e341e75d --- /dev/null +++ b/drivers/media/video/aptina-pll.h @@ -0,0 +1,56 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __APTINA_PLL_H +#define __APTINA_PLL_H + +struct aptina_pll { + unsigned int ext_clock; + unsigned int pix_clock; + + unsigned int n; + unsigned int m; + unsigned int p1; +}; + +struct aptina_pll_limits { + unsigned int ext_clock_min; + unsigned int ext_clock_max; + unsigned int int_clock_min; + unsigned int int_clock_max; + unsigned int out_clock_min; + unsigned int out_clock_max; + unsigned int pix_clock_max; + + unsigned int n_min; + unsigned int n_max; + unsigned int m_min; + unsigned int m_max; + unsigned int p1_min; + unsigned int p1_max; +}; + +struct device; + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll); + +#endif /* __APTINA_PLL_H */ diff --git a/drivers/media/video/as3645a.c b/drivers/media/video/as3645a.c index f241702a0f36..7a3371f044fc 100644 --- a/drivers/media/video/as3645a.c +++ b/drivers/media/video/as3645a.c @@ -881,24 +881,7 @@ static struct i2c_driver as3645a_i2c_driver = { .id_table = as3645a_id_table, }; -static int __init as3645a_init(void) -{ - int rval; - - rval = i2c_add_driver(&as3645a_i2c_driver); - if (rval) - pr_err("%s: Failed to register the driver\n", AS3645A_NAME); - - return rval; -} - -static void __exit as3645a_exit(void) -{ - i2c_del_driver(&as3645a_i2c_driver); -} - -module_init(as3645a_init); -module_exit(as3645a_exit); +module_i2c_driver(as3645a_i2c_driver); MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); diff --git a/drivers/media/video/blackfin/Kconfig b/drivers/media/video/blackfin/Kconfig new file mode 100644 index 000000000000..ecd5323768b7 --- /dev/null +++ b/drivers/media/video/blackfin/Kconfig @@ -0,0 +1,10 @@ +config VIDEO_BLACKFIN_CAPTURE + tristate "Blackfin Video Capture Driver" + depends on VIDEO_V4L2 && BLACKFIN && I2C + select VIDEOBUF2_DMA_CONTIG + help + V4L2 bridge driver for Blackfin video capture device. + Choose PPI or EPPI as its interface. + + To compile this driver as a module, choose M here: the + module will be called bfin_video_capture. diff --git a/drivers/media/video/blackfin/Makefile b/drivers/media/video/blackfin/Makefile new file mode 100644 index 000000000000..aa3a0a216387 --- /dev/null +++ b/drivers/media/video/blackfin/Makefile @@ -0,0 +1,2 @@ +bfin_video_capture-objs := bfin_capture.o ppi.o +obj-$(CONFIG_VIDEO_BLACKFIN_CAPTURE) += bfin_video_capture.o diff --git a/drivers/media/video/blackfin/bfin_capture.c b/drivers/media/video/blackfin/bfin_capture.c new file mode 100644 index 000000000000..514fcf742f5a --- /dev/null +++ b/drivers/media/video/blackfin/bfin_capture.c @@ -0,0 +1,1059 @@ +/* + * Analog Devices video capture driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/types.h> + +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-dma-contig.h> + +#include <asm/dma.h> + +#include <media/blackfin/bfin_capture.h> +#include <media/blackfin/ppi.h> + +#define CAPTURE_DRV_NAME "bfin_capture" +#define BCAP_MIN_NUM_BUF 2 + +struct bcap_format { + char *desc; + u32 pixelformat; + enum v4l2_mbus_pixelcode mbus_code; + int bpp; /* bits per pixel */ +}; + +struct bcap_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct bcap_device { + /* capture device instance */ + struct v4l2_device v4l2_dev; + /* v4l2 control handler */ + struct v4l2_ctrl_handler ctrl_handler; + /* device node data */ + struct video_device *video_dev; + /* sub device instance */ + struct v4l2_subdev *sd; + /* capture config */ + struct bfin_capture_config *cfg; + /* ppi interface */ + struct ppi_if *ppi; + /* current input */ + unsigned int cur_input; + /* current selected standard */ + v4l2_std_id std; + /* used to store pixel format */ + struct v4l2_pix_format fmt; + /* bits per pixel*/ + int bpp; + /* used to store sensor supported format */ + struct bcap_format *sensor_formats; + /* number of sensor formats array */ + int num_sensor_formats; + /* pointing to current video buffer */ + struct bcap_buffer *cur_frm; + /* pointing to next video buffer */ + struct bcap_buffer *next_frm; + /* buffer queue used in videobuf2 */ + struct vb2_queue buffer_queue; + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + /* queue of filled frames */ + struct list_head dma_queue; + /* used in videobuf2 callback */ + spinlock_t lock; + /* used to access capture device */ + struct mutex mutex; + /* used to wait ppi to complete one transfer */ + struct completion comp; + /* prepare to stop */ + bool stop; +}; + +struct bcap_fh { + struct v4l2_fh fh; + /* indicates whether this file handle is doing IO */ + bool io_allowed; +}; + +static const struct bcap_format bcap_formats[] = { + { + .desc = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .bpp = 16, + }, + { + .desc = "YCbCr 4:2:2 Interleaved YUYV", + .pixelformat = V4L2_PIX_FMT_YUYV, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .bpp = 16, + }, + { + .desc = "RGB 565", + .pixelformat = V4L2_PIX_FMT_RGB565, + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .bpp = 16, + }, + { + .desc = "RGB 444", + .pixelformat = V4L2_PIX_FMT_RGB444, + .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, + .bpp = 16, + }, + +}; +#define BCAP_MAX_FMTS ARRAY_SIZE(bcap_formats) + +static irqreturn_t bcap_isr(int irq, void *dev_id); + +static struct bcap_buffer *to_bcap_vb(struct vb2_buffer *vb) +{ + return container_of(vb, struct bcap_buffer, vb); +} + +static int bcap_init_sensor_formats(struct bcap_device *bcap_dev) +{ + enum v4l2_mbus_pixelcode code; + struct bcap_format *sf; + unsigned int num_formats = 0; + int i, j; + + while (!v4l2_subdev_call(bcap_dev->sd, video, + enum_mbus_fmt, num_formats, &code)) + num_formats++; + if (!num_formats) + return -ENXIO; + + sf = kzalloc(num_formats * sizeof(*sf), GFP_KERNEL); + if (!sf) + return -ENOMEM; + + for (i = 0; i < num_formats; i++) { + v4l2_subdev_call(bcap_dev->sd, video, + enum_mbus_fmt, i, &code); + for (j = 0; j < BCAP_MAX_FMTS; j++) + if (code == bcap_formats[j].mbus_code) + break; + if (j == BCAP_MAX_FMTS) { + /* we don't allow this sensor working with our bridge */ + kfree(sf); + return -EINVAL; + } + sf[i] = bcap_formats[j]; + } + bcap_dev->sensor_formats = sf; + bcap_dev->num_sensor_formats = num_formats; + return 0; +} + +static void bcap_free_sensor_formats(struct bcap_device *bcap_dev) +{ + bcap_dev->num_sensor_formats = 0; + kfree(bcap_dev->sensor_formats); + bcap_dev->sensor_formats = NULL; +} + +static int bcap_open(struct file *file) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct video_device *vfd = bcap_dev->video_dev; + struct bcap_fh *bcap_fh; + + if (!bcap_dev->sd) { + v4l2_err(&bcap_dev->v4l2_dev, "No sub device registered\n"); + return -ENODEV; + } + + bcap_fh = kzalloc(sizeof(*bcap_fh), GFP_KERNEL); + if (!bcap_fh) { + v4l2_err(&bcap_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + v4l2_fh_init(&bcap_fh->fh, vfd); + + /* store pointer to v4l2_fh in private_data member of file */ + file->private_data = &bcap_fh->fh; + v4l2_fh_add(&bcap_fh->fh); + bcap_fh->io_allowed = false; + return 0; +} + +static int bcap_release(struct file *file) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + /* if this instance is doing IO */ + if (bcap_fh->io_allowed) + vb2_queue_release(&bcap_dev->buffer_queue); + + file->private_data = NULL; + v4l2_fh_del(&bcap_fh->fh); + v4l2_fh_exit(&bcap_fh->fh); + kfree(bcap_fh); + return 0; +} + +static int bcap_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_mmap(&bcap_dev->buffer_queue, vma); +} + +#ifndef CONFIG_MMU +static unsigned long bcap_get_unmapped_area(struct file *file, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_get_unmapped_area(&bcap_dev->buffer_queue, + addr, + len, + pgoff, + flags); +} +#endif + +static unsigned int bcap_poll(struct file *file, poll_table *wait) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_poll(&bcap_dev->buffer_queue, file, wait); +} + +static int bcap_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + + if (*nbuffers < BCAP_MIN_NUM_BUF) + *nbuffers = BCAP_MIN_NUM_BUF; + + *nplanes = 1; + sizes[0] = bcap_dev->fmt.sizeimage; + alloc_ctxs[0] = bcap_dev->alloc_ctx; + + return 0; +} + +static int bcap_buffer_init(struct vb2_buffer *vb) +{ + struct bcap_buffer *buf = to_bcap_vb(vb); + + INIT_LIST_HEAD(&buf->list); + return 0; +} + +static int bcap_buffer_prepare(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long size; + + size = bcap_dev->fmt.sizeimage; + if (vb2_plane_size(vb, 0) < size) { + v4l2_err(&bcap_dev->v4l2_dev, "buffer too small (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + vb2_set_plane_payload(&buf->vb, 0, size); + + return 0; +} + +static void bcap_buffer_queue(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long flags; + + spin_lock_irqsave(&bcap_dev->lock, flags); + list_add_tail(&buf->list, &bcap_dev->dma_queue); + spin_unlock_irqrestore(&bcap_dev->lock, flags); +} + +static void bcap_buffer_cleanup(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long flags; + + spin_lock_irqsave(&bcap_dev->lock, flags); + list_del_init(&buf->list); + spin_unlock_irqrestore(&bcap_dev->lock, flags); +} + +static void bcap_lock(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + mutex_lock(&bcap_dev->mutex); +} + +static void bcap_unlock(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + mutex_unlock(&bcap_dev->mutex); +} + +static int bcap_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + struct ppi_if *ppi = bcap_dev->ppi; + struct ppi_params params; + int ret; + + /* enable streamon on the sub device */ + ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 1); + if (ret && (ret != -ENOIOCTLCMD)) { + v4l2_err(&bcap_dev->v4l2_dev, "stream on failed in subdev\n"); + return ret; + } + + /* set ppi params */ + params.width = bcap_dev->fmt.width; + params.height = bcap_dev->fmt.height; + params.bpp = bcap_dev->bpp; + params.ppi_control = bcap_dev->cfg->ppi_control; + params.int_mask = bcap_dev->cfg->int_mask; + params.blank_clocks = bcap_dev->cfg->blank_clocks; + ret = ppi->ops->set_params(ppi, ¶ms); + if (ret < 0) { + v4l2_err(&bcap_dev->v4l2_dev, + "Error in setting ppi params\n"); + return ret; + } + + /* attach ppi DMA irq handler */ + ret = ppi->ops->attach_irq(ppi, bcap_isr); + if (ret < 0) { + v4l2_err(&bcap_dev->v4l2_dev, + "Error in attaching interrupt handler\n"); + return ret; + } + + INIT_COMPLETION(bcap_dev->comp); + bcap_dev->stop = false; + return 0; +} + +static int bcap_stop_streaming(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + struct ppi_if *ppi = bcap_dev->ppi; + int ret; + + if (!vb2_is_streaming(vq)) + return 0; + + bcap_dev->stop = true; + wait_for_completion(&bcap_dev->comp); + ppi->ops->stop(ppi); + ppi->ops->detach_irq(ppi); + ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&bcap_dev->v4l2_dev, + "stream off failed in subdev\n"); + + /* release all active buffers */ + while (!list_empty(&bcap_dev->dma_queue)) { + bcap_dev->next_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + list_del(&bcap_dev->next_frm->list); + vb2_buffer_done(&bcap_dev->next_frm->vb, VB2_BUF_STATE_ERROR); + } + return 0; +} + +static struct vb2_ops bcap_video_qops = { + .queue_setup = bcap_queue_setup, + .buf_init = bcap_buffer_init, + .buf_prepare = bcap_buffer_prepare, + .buf_cleanup = bcap_buffer_cleanup, + .buf_queue = bcap_buffer_queue, + .wait_prepare = bcap_unlock, + .wait_finish = bcap_lock, + .start_streaming = bcap_start_streaming, + .stop_streaming = bcap_stop_streaming, +}; + +static int bcap_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct vb2_queue *vq = &bcap_dev->buffer_queue; + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (vb2_is_busy(vq)) + return -EBUSY; + + bcap_fh->io_allowed = true; + + return vb2_reqbufs(vq, req_buf); +} + +static int bcap_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_querybuf(&bcap_dev->buffer_queue, buf); +} + +static int bcap_qbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (!bcap_fh->io_allowed) + return -EBUSY; + + return vb2_qbuf(&bcap_dev->buffer_queue, buf); +} + +static int bcap_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (!bcap_fh->io_allowed) + return -EBUSY; + + return vb2_dqbuf(&bcap_dev->buffer_queue, + buf, file->f_flags & O_NONBLOCK); +} + +static irqreturn_t bcap_isr(int irq, void *dev_id) +{ + struct ppi_if *ppi = dev_id; + struct bcap_device *bcap_dev = ppi->priv; + struct timeval timevalue; + struct vb2_buffer *vb = &bcap_dev->cur_frm->vb; + dma_addr_t addr; + + spin_lock(&bcap_dev->lock); + + if (bcap_dev->cur_frm != bcap_dev->next_frm) { + do_gettimeofday(&timevalue); + vb->v4l2_buf.timestamp = timevalue; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + bcap_dev->cur_frm = bcap_dev->next_frm; + } + + ppi->ops->stop(ppi); + + if (bcap_dev->stop) { + complete(&bcap_dev->comp); + } else { + if (!list_empty(&bcap_dev->dma_queue)) { + bcap_dev->next_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + list_del(&bcap_dev->next_frm->list); + addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->next_frm->vb, 0); + ppi->ops->update_addr(ppi, (unsigned long)addr); + } + ppi->ops->start(ppi); + } + + spin_unlock(&bcap_dev->lock); + + return IRQ_HANDLED; +} + +static int bcap_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_fh *fh = file->private_data; + struct ppi_if *ppi = bcap_dev->ppi; + dma_addr_t addr; + int ret; + + if (!fh->io_allowed) + return -EBUSY; + + /* call streamon to start streaming in videobuf */ + ret = vb2_streamon(&bcap_dev->buffer_queue, buf_type); + if (ret) + return ret; + + /* if dma queue is empty, return error */ + if (list_empty(&bcap_dev->dma_queue)) { + v4l2_err(&bcap_dev->v4l2_dev, "dma queue is empty\n"); + ret = -EINVAL; + goto err; + } + + /* get the next frame from the dma queue */ + bcap_dev->next_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + bcap_dev->cur_frm = bcap_dev->next_frm; + /* remove buffer from the dma queue */ + list_del(&bcap_dev->cur_frm->list); + addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->cur_frm->vb, 0); + /* update DMA address */ + ppi->ops->update_addr(ppi, (unsigned long)addr); + /* enable ppi */ + ppi->ops->start(ppi); + + return 0; +err: + vb2_streamoff(&bcap_dev->buffer_queue, buf_type); + return ret; +} + +static int bcap_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_fh *fh = file->private_data; + + if (!fh->io_allowed) + return -EBUSY; + + return vb2_streamoff(&bcap_dev->buffer_queue, buf_type); +} + +static int bcap_querystd(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, video, querystd, std); +} + +static int bcap_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + *std = bcap_dev->std; + return 0; +} + +static int bcap_s_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + int ret; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + ret = v4l2_subdev_call(bcap_dev->sd, core, s_std, *std); + if (ret < 0) + return ret; + + bcap_dev->std = *std; + return 0; +} + +static int bcap_enum_input(struct file *file, void *priv, + struct v4l2_input *input) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bfin_capture_config *config = bcap_dev->cfg; + int ret; + u32 status; + + if (input->index >= config->num_inputs) + return -EINVAL; + + *input = config->inputs[input->index]; + /* get input status */ + ret = v4l2_subdev_call(bcap_dev->sd, video, g_input_status, &status); + if (!ret) + input->status = status; + return 0; +} + +static int bcap_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + *index = bcap_dev->cur_input; + return 0; +} + +static int bcap_s_input(struct file *file, void *priv, unsigned int index) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bfin_capture_config *config = bcap_dev->cfg; + struct bcap_route *route; + int ret; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + if (index >= config->num_inputs) + return -EINVAL; + + route = &config->routes[index]; + ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing, + route->input, route->output, 0); + if ((ret < 0) && (ret != -ENOIOCTLCMD)) { + v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n"); + return ret; + } + bcap_dev->cur_input = index; + return 0; +} + +static int bcap_try_format(struct bcap_device *bcap, + struct v4l2_pix_format *pixfmt, + enum v4l2_mbus_pixelcode *mbus_code, + int *bpp) +{ + struct bcap_format *sf = bcap->sensor_formats; + struct bcap_format *fmt = NULL; + struct v4l2_mbus_framefmt mbus_fmt; + int ret, i; + + for (i = 0; i < bcap->num_sensor_formats; i++) { + fmt = &sf[i]; + if (pixfmt->pixelformat == fmt->pixelformat) + break; + } + if (i == bcap->num_sensor_formats) + fmt = &sf[0]; + + if (mbus_code) + *mbus_code = fmt->mbus_code; + if (bpp) + *bpp = fmt->bpp; + v4l2_fill_mbus_format(&mbus_fmt, pixfmt, fmt->mbus_code); + ret = v4l2_subdev_call(bcap->sd, video, + try_mbus_fmt, &mbus_fmt); + if (ret < 0) + return ret; + v4l2_fill_pix_format(pixfmt, &mbus_fmt); + pixfmt->bytesperline = pixfmt->width * fmt->bpp / 8; + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + return 0; +} + +static int bcap_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_format *sf = bcap_dev->sensor_formats; + + if (fmt->index >= bcap_dev->num_sensor_formats) + return -EINVAL; + + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strlcpy(fmt->description, + sf[fmt->index].desc, + sizeof(fmt->description)); + fmt->pixelformat = sf[fmt->index].pixelformat; + return 0; +} + +static int bcap_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + return bcap_try_format(bcap_dev, pixfmt, NULL, NULL); +} + +static int bcap_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + fmt->fmt.pix = bcap_dev->fmt; + return 0; +} + +static int bcap_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_mbus_framefmt mbus_fmt; + enum v4l2_mbus_pixelcode mbus_code; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + int ret, bpp; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + /* see if format works */ + ret = bcap_try_format(bcap_dev, pixfmt, &mbus_code, &bpp); + if (ret < 0) + return ret; + + v4l2_fill_mbus_format(&mbus_fmt, pixfmt, mbus_code); + ret = v4l2_subdev_call(bcap_dev->sd, video, s_mbus_fmt, &mbus_fmt); + if (ret < 0) + return ret; + bcap_dev->fmt = *pixfmt; + bcap_dev->bpp = bpp; + return 0; +} + +static int bcap_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, "Blackfin Platform", sizeof(cap->bus_info)); + strlcpy(cap->card, bcap_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int bcap_g_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return v4l2_subdev_call(bcap_dev->sd, video, g_parm, a); +} + +static int bcap_s_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return v4l2_subdev_call(bcap_dev->sd, video, s_parm, a); +} + +static int bcap_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + return v4l2_subdev_call(bcap_dev->sd, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int bcap_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, core, + g_register, reg); +} + +static int bcap_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, core, + s_register, reg); +} +#endif + +static int bcap_log_status(struct file *file, void *priv) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + /* status for sub devices */ + v4l2_device_call_all(&bcap_dev->v4l2_dev, 0, core, log_status); + return 0; +} + +static const struct v4l2_ioctl_ops bcap_ioctl_ops = { + .vidioc_querycap = bcap_querycap, + .vidioc_g_fmt_vid_cap = bcap_g_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = bcap_enum_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = bcap_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = bcap_try_fmt_vid_cap, + .vidioc_enum_input = bcap_enum_input, + .vidioc_g_input = bcap_g_input, + .vidioc_s_input = bcap_s_input, + .vidioc_querystd = bcap_querystd, + .vidioc_s_std = bcap_s_std, + .vidioc_g_std = bcap_g_std, + .vidioc_reqbufs = bcap_reqbufs, + .vidioc_querybuf = bcap_querybuf, + .vidioc_qbuf = bcap_qbuf, + .vidioc_dqbuf = bcap_dqbuf, + .vidioc_streamon = bcap_streamon, + .vidioc_streamoff = bcap_streamoff, + .vidioc_g_parm = bcap_g_parm, + .vidioc_s_parm = bcap_s_parm, + .vidioc_g_chip_ident = bcap_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = bcap_dbg_g_register, + .vidioc_s_register = bcap_dbg_s_register, +#endif + .vidioc_log_status = bcap_log_status, +}; + +static struct v4l2_file_operations bcap_fops = { + .owner = THIS_MODULE, + .open = bcap_open, + .release = bcap_release, + .unlocked_ioctl = video_ioctl2, + .mmap = bcap_mmap, +#ifndef CONFIG_MMU + .get_unmapped_area = bcap_get_unmapped_area, +#endif + .poll = bcap_poll +}; + +static int __devinit bcap_probe(struct platform_device *pdev) +{ + struct bcap_device *bcap_dev; + struct video_device *vfd; + struct i2c_adapter *i2c_adap; + struct bfin_capture_config *config; + struct vb2_queue *q; + int ret; + + config = pdev->dev.platform_data; + if (!config) { + v4l2_err(pdev->dev.driver, "Unable to get board config\n"); + return -ENODEV; + } + + bcap_dev = kzalloc(sizeof(*bcap_dev), GFP_KERNEL); + if (!bcap_dev) { + v4l2_err(pdev->dev.driver, "Unable to alloc bcap_dev\n"); + return -ENOMEM; + } + + bcap_dev->cfg = config; + + bcap_dev->ppi = ppi_create_instance(config->ppi_info); + if (!bcap_dev->ppi) { + v4l2_err(pdev->dev.driver, "Unable to create ppi\n"); + ret = -ENODEV; + goto err_free_dev; + } + bcap_dev->ppi->priv = bcap_dev; + + bcap_dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(bcap_dev->alloc_ctx)) { + ret = PTR_ERR(bcap_dev->alloc_ctx); + goto err_free_ppi; + } + + vfd = video_device_alloc(); + if (!vfd) { + ret = -ENOMEM; + v4l2_err(pdev->dev.driver, "Unable to alloc video device\n"); + goto err_cleanup_ctx; + } + + /* initialize field of video device */ + vfd->release = video_device_release; + vfd->fops = &bcap_fops; + vfd->ioctl_ops = &bcap_ioctl_ops; + vfd->tvnorms = 0; + vfd->v4l2_dev = &bcap_dev->v4l2_dev; + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + strncpy(vfd->name, CAPTURE_DRV_NAME, sizeof(vfd->name)); + bcap_dev->video_dev = vfd; + + ret = v4l2_device_register(&pdev->dev, &bcap_dev->v4l2_dev); + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register v4l2 device\n"); + goto err_release_vdev; + } + v4l2_info(&bcap_dev->v4l2_dev, "v4l2 device registered\n"); + + bcap_dev->v4l2_dev.ctrl_handler = &bcap_dev->ctrl_handler; + ret = v4l2_ctrl_handler_init(&bcap_dev->ctrl_handler, 0); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to init control handler\n"); + goto err_unreg_v4l2; + } + + spin_lock_init(&bcap_dev->lock); + /* initialize queue */ + q = &bcap_dev->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP; + q->drv_priv = bcap_dev; + q->buf_struct_size = sizeof(struct bcap_buffer); + q->ops = &bcap_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + + vb2_queue_init(q); + + mutex_init(&bcap_dev->mutex); + init_completion(&bcap_dev->comp); + + /* init video dma queues */ + INIT_LIST_HEAD(&bcap_dev->dma_queue); + + vfd->lock = &bcap_dev->mutex; + + /* register video device */ + ret = video_register_device(bcap_dev->video_dev, VFL_TYPE_GRABBER, -1); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to register video device\n"); + goto err_free_handler; + } + video_set_drvdata(bcap_dev->video_dev, bcap_dev); + v4l2_info(&bcap_dev->v4l2_dev, "video device registered as: %s\n", + video_device_node_name(vfd)); + + /* load up the subdevice */ + i2c_adap = i2c_get_adapter(config->i2c_adapter_id); + if (!i2c_adap) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to find i2c adapter\n"); + goto err_unreg_vdev; + + } + bcap_dev->sd = v4l2_i2c_new_subdev_board(&bcap_dev->v4l2_dev, + i2c_adap, + &config->board_info, + NULL); + if (bcap_dev->sd) { + int i; + /* update tvnorms from the sub devices */ + for (i = 0; i < config->num_inputs; i++) + vfd->tvnorms |= config->inputs[i].std; + } else { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to register sub device\n"); + goto err_unreg_vdev; + } + + v4l2_info(&bcap_dev->v4l2_dev, "v4l2 sub device registered\n"); + + /* now we can probe the default state */ + if (vfd->tvnorms) { + v4l2_std_id std; + ret = v4l2_subdev_call(bcap_dev->sd, core, g_std, &std); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to get std\n"); + goto err_unreg_vdev; + } + bcap_dev->std = std; + } + ret = bcap_init_sensor_formats(bcap_dev); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to create sensor formats table\n"); + goto err_unreg_vdev; + } + return 0; +err_unreg_vdev: + video_unregister_device(bcap_dev->video_dev); + bcap_dev->video_dev = NULL; +err_free_handler: + v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); +err_unreg_v4l2: + v4l2_device_unregister(&bcap_dev->v4l2_dev); +err_release_vdev: + if (bcap_dev->video_dev) + video_device_release(bcap_dev->video_dev); +err_cleanup_ctx: + vb2_dma_contig_cleanup_ctx(bcap_dev->alloc_ctx); +err_free_ppi: + ppi_delete_instance(bcap_dev->ppi); +err_free_dev: + kfree(bcap_dev); + return ret; +} + +static int __devexit bcap_remove(struct platform_device *pdev) +{ + struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); + struct bcap_device *bcap_dev = container_of(v4l2_dev, + struct bcap_device, v4l2_dev); + + bcap_free_sensor_formats(bcap_dev); + video_unregister_device(bcap_dev->video_dev); + v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); + v4l2_device_unregister(v4l2_dev); + vb2_dma_contig_cleanup_ctx(bcap_dev->alloc_ctx); + ppi_delete_instance(bcap_dev->ppi); + kfree(bcap_dev); + return 0; +} + +static struct platform_driver bcap_driver = { + .driver = { + .name = CAPTURE_DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = bcap_probe, + .remove = __devexit_p(bcap_remove), +}; + +static __init int bcap_init(void) +{ + return platform_driver_register(&bcap_driver); +} + +static __exit void bcap_exit(void) +{ + platform_driver_unregister(&bcap_driver); +} + +module_init(bcap_init); +module_exit(bcap_exit); + +MODULE_DESCRIPTION("Analog Devices blackfin video capture driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/blackfin/ppi.c b/drivers/media/video/blackfin/ppi.c new file mode 100644 index 000000000000..d29592186b02 --- /dev/null +++ b/drivers/media/video/blackfin/ppi.c @@ -0,0 +1,271 @@ +/* + * ppi.c Analog Devices Parallel Peripheral Interface driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/slab.h> + +#include <asm/bfin_ppi.h> +#include <asm/blackfin.h> +#include <asm/cacheflush.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#include <media/blackfin/ppi.h> + +static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler); +static void ppi_detach_irq(struct ppi_if *ppi); +static int ppi_start(struct ppi_if *ppi); +static int ppi_stop(struct ppi_if *ppi); +static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params); +static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr); + +static const struct ppi_ops ppi_ops = { + .attach_irq = ppi_attach_irq, + .detach_irq = ppi_detach_irq, + .start = ppi_start, + .stop = ppi_stop, + .set_params = ppi_set_params, + .update_addr = ppi_update_addr, +}; + +static irqreturn_t ppi_irq_err(int irq, void *dev_id) +{ + struct ppi_if *ppi = dev_id; + const struct ppi_info *info = ppi->info; + + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + unsigned short status; + + /* register on bf561 is cleared when read + * others are W1C + */ + status = bfin_read16(®->status); + bfin_write16(®->status, 0xff00); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write16(®->status, 0xffff); + break; + } + default: + break; + } + + return IRQ_HANDLED; +} + +static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler) +{ + const struct ppi_info *info = ppi->info; + int ret; + + ret = request_dma(info->dma_ch, "PPI_DMA"); + + if (ret) { + pr_err("Unable to allocate DMA channel for PPI\n"); + return ret; + } + set_dma_callback(info->dma_ch, handler, ppi); + + if (ppi->err_int) { + ret = request_irq(info->irq_err, ppi_irq_err, 0, "PPI ERROR", ppi); + if (ret) { + pr_err("Unable to allocate IRQ for PPI\n"); + free_dma(info->dma_ch); + } + } + return ret; +} + +static void ppi_detach_irq(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + if (ppi->err_int) + free_irq(info->irq_err, ppi); + free_dma(info->dma_ch); +} + +static int ppi_start(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + /* enable DMA */ + enable_dma(info->dma_ch); + + /* enable PPI */ + ppi->ppi_control |= PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + bfin_write16(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write32(®->control, ppi->ppi_control); + break; + } + default: + return -EINVAL; + } + + SSYNC(); + return 0; +} + +static int ppi_stop(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + /* disable PPI */ + ppi->ppi_control &= ~PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + bfin_write16(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write32(®->control, ppi->ppi_control); + break; + } + default: + return -EINVAL; + } + + /* disable DMA */ + clear_dma_irqstat(info->dma_ch); + disable_dma(info->dma_ch); + + SSYNC(); + return 0; +} + +static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) +{ + const struct ppi_info *info = ppi->info; + int dma32 = 0; + int dma_config, bytes_per_line, lines_per_frame; + + bytes_per_line = params->width * params->bpp / 8; + lines_per_frame = params->height; + if (params->int_mask == 0xFFFFFFFF) + ppi->err_int = false; + else + ppi->err_int = true; + + dma_config = (DMA_FLOW_STOP | WNR | RESTART | DMA2D | DI_EN); + ppi->ppi_control = params->ppi_control & ~PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + + if (params->ppi_control & DMA32) + dma32 = 1; + + bfin_write16(®->control, ppi->ppi_control); + bfin_write16(®->count, bytes_per_line - 1); + bfin_write16(®->frame, lines_per_frame); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + + if ((params->ppi_control & PACK_EN) + || (params->ppi_control & 0x38000) > DLEN_16) + dma32 = 1; + + bfin_write32(®->control, ppi->ppi_control); + bfin_write16(®->line, bytes_per_line + params->blank_clocks); + bfin_write16(®->frame, lines_per_frame); + bfin_write16(®->hdelay, 0); + bfin_write16(®->vdelay, 0); + bfin_write16(®->hcount, bytes_per_line); + bfin_write16(®->vcount, lines_per_frame); + break; + } + default: + return -EINVAL; + } + + if (dma32) { + dma_config |= WDSIZE_32; + set_dma_x_count(info->dma_ch, bytes_per_line >> 2); + set_dma_x_modify(info->dma_ch, 4); + set_dma_y_modify(info->dma_ch, 4); + } else { + dma_config |= WDSIZE_16; + set_dma_x_count(info->dma_ch, bytes_per_line >> 1); + set_dma_x_modify(info->dma_ch, 2); + set_dma_y_modify(info->dma_ch, 2); + } + set_dma_y_count(info->dma_ch, lines_per_frame); + set_dma_config(info->dma_ch, dma_config); + + SSYNC(); + return 0; +} + +static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr) +{ + set_dma_start_addr(ppi->info->dma_ch, addr); +} + +struct ppi_if *ppi_create_instance(const struct ppi_info *info) +{ + struct ppi_if *ppi; + + if (!info || !info->pin_req) + return NULL; + + if (peripheral_request_list(info->pin_req, KBUILD_MODNAME)) { + pr_err("request peripheral failed\n"); + return NULL; + } + + ppi = kzalloc(sizeof(*ppi), GFP_KERNEL); + if (!ppi) { + peripheral_free_list(info->pin_req); + pr_err("unable to allocate memory for ppi handle\n"); + return NULL; + } + ppi->ops = &ppi_ops; + ppi->info = info; + + pr_info("ppi probe success\n"); + return ppi; +} + +void ppi_delete_instance(struct ppi_if *ppi) +{ + peripheral_free_list(ppi->info->pin_req); + kfree(ppi); +} diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index 859eabf57978..377bf05b1efd 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -514,15 +514,4 @@ static struct i2c_driver bt819_driver = { .id_table = bt819_id, }; -static __init int init_bt819(void) -{ - return i2c_add_driver(&bt819_driver); -} - -static __exit void exit_bt819(void) -{ - i2c_del_driver(&bt819_driver); -} - -module_init(init_bt819); -module_exit(exit_bt819); +module_i2c_driver(bt819_driver); diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index a43059d4c799..7e5bd365c239 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -270,15 +270,4 @@ static struct i2c_driver bt856_driver = { .id_table = bt856_id, }; -static __init int init_bt856(void) -{ - return i2c_add_driver(&bt856_driver); -} - -static __exit void exit_bt856(void) -{ - i2c_del_driver(&bt856_driver); -} - -module_init(init_bt856); -module_exit(exit_bt856); +module_i2c_driver(bt856_driver); diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index 4e5dcea0501d..905320b67a1c 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -240,15 +240,4 @@ static struct i2c_driver bt866_driver = { .id_table = bt866_id, }; -static __init int init_bt866(void) -{ - return i2c_add_driver(&bt866_driver); -} - -static __exit void exit_bt866(void) -{ - i2c_del_driver(&bt866_driver); -} - -module_init(init_bt866); -module_exit(exit_bt866); +module_i2c_driver(bt866_driver); diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 76c301f05095..e581b37be789 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -2035,11 +2035,7 @@ static int bttv_log_status(struct file *file, void *f) struct bttv_fh *fh = f; struct bttv *btv = fh->btv; - pr_info("%d: ======== START STATUS CARD #%d ========\n", - btv->c.nr, btv->c.nr); bttv_call_all(btv, core, log_status); - pr_info("%d: ======== END STATUS CARD #%d ========\n", - btv->c.nr, btv->c.nr); return 0; } diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 1d64af9adf71..c8581e26fa9c 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -249,15 +249,4 @@ static struct i2c_driver cs5345_driver = { .id_table = cs5345_id, }; -static __init int init_cs5345(void) -{ - return i2c_add_driver(&cs5345_driver); -} - -static __exit void exit_cs5345(void) -{ - i2c_del_driver(&cs5345_driver); -} - -module_init(init_cs5345); -module_exit(exit_cs5345); +module_i2c_driver(cs5345_driver); diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index 51c5b9ad67d8..b293912206eb 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -248,15 +248,4 @@ static struct i2c_driver cs53l32a_driver = { .id_table = cs53l32a_id, }; -static __init int init_cs53l32a(void) -{ - return i2c_add_driver(&cs53l32a_driver); -} - -static __exit void exit_cs53l32a(void) -{ - i2c_del_driver(&cs53l32a_driver); -} - -module_init(init_cs53l32a); -module_exit(exit_cs53l32a); +module_i2c_driver(cs53l32a_driver); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 349bd9c2aff5..b55d57cc1a1c 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -38,7 +38,7 @@ #include "cx18-ioctl.h" #include "cx18-controls.h" #include "tuner-xc2028.h" - +#include <linux/dma-mapping.h> #include <media/tveeprom.h> /* If you have already X v4l cards, then set this to X. This way @@ -75,7 +75,7 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; static unsigned cardtype_c = 1; static unsigned tuner_c = 1; -static bool radio_c = 1; +static unsigned radio_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; @@ -110,7 +110,7 @@ static int retry_mmio = 1; int cx18_debug; module_param_array(tuner, int, &tuner_c, 0644); -module_param_array(radio, bool, &radio_c, 0644); +module_param_array(radio, int, &radio_c, 0644); module_param_array(cardtype, int, &cardtype_c, 0644); module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); @@ -812,7 +812,7 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, CX18_ERR("Can't enable device %d!\n", cx->instance); return -EIO; } - if (pci_set_dma_mask(pci_dev, 0xffffffff)) { + if (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) { CX18_ERR("No suitable DMA available, card %d\n", cx->instance); return -EIO; } diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index b9a94fc5146d..7a37e0ee136f 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -44,8 +44,6 @@ #include <linux/slab.h> #include <asm/byteorder.h> -#include <linux/dvb/video.h> -#include <linux/dvb/audio.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 66b1c15c3541..be49f68ddf37 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -1085,8 +1085,6 @@ static int cx18_log_status(struct file *file, void *fh) struct v4l2_audio audin; int i; - CX18_INFO("================= START STATUS CARD #%d " - "=================\n", cx->instance); CX18_INFO("Version: %s Card: %s\n", CX18_VERSION, cx->card_name); if (cx->hw_flags & CX18_HW_TVEEPROM) { struct tveeprom tv; @@ -1120,8 +1118,6 @@ static int cx18_log_status(struct file *file, void *fh) CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", (long long)cx->mpg_data_received, (long long)cx->vbi_data_inserted); - CX18_INFO("================== END STATUS CARD #%d " - "==================\n", cx->instance); return 0; } diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/video/cx231xx/cx231xx-417.c index f8f0e59cd583..d4327dab5a36 100644 --- a/drivers/media/video/cx231xx/cx231xx-417.c +++ b/drivers/media/video/cx231xx/cx231xx-417.c @@ -1686,7 +1686,6 @@ static struct v4l2_capability pvr_capability = { .capabilities = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE), - .reserved = {0, 0, 0, 0} }; static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap) diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 875a7ce94736..8ed460d692e0 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -861,7 +861,6 @@ void cx231xx_release_resources(struct cx231xx *dev) kfree(dev->sliced_cc_mode.alt_max_pkt_size); kfree(dev->ts1_mode.alt_max_pkt_size); kfree(dev); - dev = NULL; } /* diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c index 829a41b0c9ef..7f916f0685e9 100644 --- a/drivers/media/video/cx231xx/cx231xx-video.c +++ b/drivers/media/video/cx231xx/cx231xx-video.c @@ -2319,8 +2319,7 @@ static int cx231xx_v4l2_close(struct file *filp) if (dev->state & DEV_DISCONNECTED) { if (atomic_read(&dev->devlist_count) > 0) { cx231xx_release_resources(dev); - kfree(dev); - dev = NULL; + fh->dev = NULL; return 0; } return 0; @@ -2350,8 +2349,7 @@ static int cx231xx_v4l2_close(struct file *filp) free the remaining resources */ if (dev->state & DEV_DISCONNECTED) { cx231xx_release_resources(dev); - kfree(dev); - dev = NULL; + fh->dev = NULL; return 0; } diff --git a/drivers/media/video/cx25821/cx25821-core.c b/drivers/media/video/cx25821/cx25821-core.c index f617474f9073..7930ca58349f 100644 --- a/drivers/media/video/cx25821/cx25821-core.c +++ b/drivers/media/video/cx25821/cx25821-core.c @@ -1474,8 +1474,13 @@ static DEFINE_PCI_DEVICE_TABLE(cx25821_pci_tbl) = { .device = 0x8210, .subvendor = 0x14f1, .subdevice = 0x0920, - }, - { + }, { + /* CX25821 No Brand */ + .vendor = 0x14f1, + .device = 0x8210, + .subvendor = 0x0000, + .subdevice = 0x0000, + }, { /* --- end of list --- */ } }; diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 05247d4c340a..fc1ff69cffd0 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -5301,15 +5301,4 @@ static struct i2c_driver cx25840_driver = { .id_table = cx25840_id, }; -static __init int init_cx25840(void) -{ - return i2c_add_driver(&cx25840_driver); -} - -static __exit void exit_cx25840(void) -{ - i2c_del_driver(&cx25840_driver); -} - -module_init(init_cx25840); -module_exit(exit_cx25840); +module_i2c_driver(cx25840_driver); diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index 25036cb11bea..8bcac65f9294 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -18,8 +18,6 @@ #include <linux/io.h> #include <linux/videodev2.h> -#include <mach/hardware.h> -#include <mach/dm646x.h> #include <media/davinci/vpif_types.h> /* Maximum channel allowed */ diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 286f02910044..7fa34b4fae26 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -39,8 +39,6 @@ #include <media/v4l2-ioctl.h> #include <media/v4l2-chip-ident.h> -#include <mach/dm646x.h> - #include "vpif_display.h" #include "vpif.h" diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 4561cd89938d..9fd8cc7dbb23 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -353,6 +353,44 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = { }; #endif +/* 1b80:e425 MaxMedia UB425-TC + * GPIO_6 - demod reset, 0=active + * GPIO_7 - LED, 0=active + */ +static struct em28xx_reg_seq maxmedia_ub425_tc[] = { + {EM2874_R80_GPIO, 0x83, 0xff, 100}, + {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ + {-1, -1, -1, -1}, +}; + +/* 2304:0242 PCTV QuatroStick (510e) + * GPIO_2: decoder reset, 0=active + * GPIO_4: decoder suspend, 0=active + * GPIO_6: demod reset, 0=active + * GPIO_7: LED, 1=active + */ +static struct em28xx_reg_seq pctv_510e[] = { + {EM2874_R80_GPIO, 0x10, 0xff, 100}, + {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + { -1, -1, -1, -1}, +}; + +/* 2013:0251 PCTV QuatroStick nano (520e) + * GPIO_2: decoder reset, 0=active + * GPIO_4: decoder suspend, 0=active + * GPIO_6: demod reset, 0=active + * GPIO_7: LED, 1=active + */ +static struct em28xx_reg_seq pctv_520e[] = { + {EM2874_R80_GPIO, 0x10, 0xff, 100}, + {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -1908,6 +1946,41 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, + /* 1b80:e425 MaxMedia UB425-TC + * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ + [EM2874_BOARD_MAXMEDIA_UB425_TC] = { + .name = "MaxMedia UB425-TC", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = maxmedia_ub425_tc, + .has_dvb = 1, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* 2304:0242 PCTV QuatroStick (510e) + * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ + [EM2884_BOARD_PCTV_510E] = { + .name = "PCTV QuatroStick (510e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_510e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* 2013:0251 PCTV QuatroStick nano (520e) + * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ + [EM2884_BOARD_PCTV_520E] = { + .name = "PCTV QuatroStick nano (520e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_520e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -2059,6 +2132,12 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ .driver_info = EM2860_BOARD_EASYCAP }, + { USB_DEVICE(0x1b80, 0xe425), + .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, + { USB_DEVICE(0x2304, 0x0242), + .driver_info = EM2884_BOARD_PCTV_510E }, + { USB_DEVICE(0x2013, 0x0251), + .driver_info = EM2884_BOARD_PCTV_520E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -3122,7 +3201,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, int i, nr; const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; char *speed; - char descr[255] = ""; udev = usb_get_dev(interface_to_usbdev(interface)); @@ -3227,21 +3305,11 @@ static int em28xx_usb_probe(struct usb_interface *interface, speed = "unknown"; } - if (udev->manufacturer) - strlcpy(descr, udev->manufacturer, sizeof(descr)); - - if (udev->product) { - if (*descr) - strlcat(descr, " ", sizeof(descr)); - strlcat(descr, udev->product, sizeof(descr)); - } - - if (*descr) - strlcat(descr, " ", sizeof(descr)); - printk(KERN_INFO DRIVER_NAME - ": New device %s@ %s Mbps (%04x:%04x, interface %d, class %d)\n", - descr, + ": New device %s %s @ %s Mbps " + "(%04x:%04x, interface %d, class %d)\n", + udev->manufacturer ? udev->manufacturer : "", + udev->product ? udev->product : "", speed, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), @@ -3307,6 +3375,17 @@ static int em28xx_usb_probe(struct usb_interface *interface, goto unlock_and_free; } + if (has_dvb) { + /* pre-allocate DVB isoc transfer buffers */ + retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE, + EM28XX_DVB_MAX_PACKETS, + EM28XX_DVB_NUM_BUFS, + dev->dvb_max_pkt_size); + if (retval) { + goto unlock_and_free; + } + } + request_modules(dev); /* Should be the last thing to do, to avoid newer udev's to @@ -3379,7 +3458,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) video_device_node_name(dev->vdev)); dev->state |= DEV_MISCONFIGURED; - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, dev->mode); dev->state |= DEV_DISCONNECTED; wake_up_interruptible(&dev->wait_frame); wake_up_interruptible(&dev->wait_stream); @@ -3388,6 +3467,9 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) em28xx_release_resources(dev); } + /* free DVB isoc buffers */ + em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE); + mutex_unlock(&dev->lock); em28xx_close_extension(dev); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 0aacc96f9a23..53a9fb91e97e 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -666,6 +666,7 @@ int em28xx_capture_start(struct em28xx *dev, int start) return rc; } +EXPORT_SYMBOL_GPL(em28xx_capture_start); int em28xx_vbi_supported(struct em28xx *dev) { @@ -961,146 +962,192 @@ static void em28xx_irq_callback(struct urb *urb) /* * Stop and Deallocate URBs */ -void em28xx_uninit_isoc(struct em28xx *dev) +void em28xx_uninit_isoc(struct em28xx *dev, enum em28xx_mode mode) { struct urb *urb; + struct em28xx_usb_isoc_bufs *isoc_bufs; int i; - em28xx_isocdbg("em28xx: called em28xx_uninit_isoc\n"); + em28xx_isocdbg("em28xx: called em28xx_uninit_isoc in mode %d\n", mode); + + if (mode == EM28XX_DIGITAL_MODE) + isoc_bufs = &dev->isoc_ctl.digital_bufs; + else + isoc_bufs = &dev->isoc_ctl.analog_bufs; dev->isoc_ctl.nfields = -1; - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = dev->isoc_ctl.urb[i]; + for (i = 0; i < isoc_bufs->num_bufs; i++) { + urb = isoc_bufs->urb[i]; if (urb) { if (!irqs_disabled()) usb_kill_urb(urb); else usb_unlink_urb(urb); - if (dev->isoc_ctl.transfer_buffer[i]) { + if (isoc_bufs->transfer_buffer[i]) { usb_free_coherent(dev->udev, urb->transfer_buffer_length, - dev->isoc_ctl.transfer_buffer[i], + isoc_bufs->transfer_buffer[i], urb->transfer_dma); } usb_free_urb(urb); - dev->isoc_ctl.urb[i] = NULL; + isoc_bufs->urb[i] = NULL; } - dev->isoc_ctl.transfer_buffer[i] = NULL; + isoc_bufs->transfer_buffer[i] = NULL; } - kfree(dev->isoc_ctl.urb); - kfree(dev->isoc_ctl.transfer_buffer); + kfree(isoc_bufs->urb); + kfree(isoc_bufs->transfer_buffer); - dev->isoc_ctl.urb = NULL; - dev->isoc_ctl.transfer_buffer = NULL; - dev->isoc_ctl.num_bufs = 0; + isoc_bufs->urb = NULL; + isoc_bufs->transfer_buffer = NULL; + isoc_bufs->num_bufs = 0; em28xx_capture_start(dev, 0); } EXPORT_SYMBOL_GPL(em28xx_uninit_isoc); /* - * Allocate URBs and start IRQ + * Allocate URBs */ -int em28xx_init_isoc(struct em28xx *dev, int max_packets, - int num_bufs, int max_pkt_size, - int (*isoc_copy) (struct em28xx *dev, struct urb *urb)) +int em28xx_alloc_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size) { - struct em28xx_dmaqueue *dma_q = &dev->vidq; - struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq; + struct em28xx_usb_isoc_bufs *isoc_bufs; int i; int sb_size, pipe; struct urb *urb; int j, k; - int rc; - em28xx_isocdbg("em28xx: called em28xx_prepare_isoc\n"); + em28xx_isocdbg("em28xx: called em28xx_alloc_isoc in mode %d\n", mode); + + if (mode == EM28XX_DIGITAL_MODE) + isoc_bufs = &dev->isoc_ctl.digital_bufs; + else + isoc_bufs = &dev->isoc_ctl.analog_bufs; /* De-allocates all pending stuff */ - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); - dev->isoc_ctl.isoc_copy = isoc_copy; - dev->isoc_ctl.num_bufs = num_bufs; + isoc_bufs->num_bufs = num_bufs; - dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); - if (!dev->isoc_ctl.urb) { + isoc_bufs->urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); + if (!isoc_bufs->urb) { em28xx_errdev("cannot alloc memory for usb buffers\n"); return -ENOMEM; } - dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, - GFP_KERNEL); - if (!dev->isoc_ctl.transfer_buffer) { + isoc_bufs->transfer_buffer = kzalloc(sizeof(void *)*num_bufs, + GFP_KERNEL); + if (!isoc_bufs->transfer_buffer) { em28xx_errdev("cannot allocate memory for usb transfer\n"); - kfree(dev->isoc_ctl.urb); + kfree(isoc_bufs->urb); return -ENOMEM; } - dev->isoc_ctl.max_pkt_size = max_pkt_size; + isoc_bufs->max_pkt_size = max_pkt_size; + isoc_bufs->num_packets = max_packets; dev->isoc_ctl.vid_buf = NULL; dev->isoc_ctl.vbi_buf = NULL; - sb_size = max_packets * dev->isoc_ctl.max_pkt_size; + sb_size = isoc_bufs->num_packets * isoc_bufs->max_pkt_size; /* allocate urbs and transfer buffers */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = usb_alloc_urb(max_packets, GFP_KERNEL); + for (i = 0; i < isoc_bufs->num_bufs; i++) { + urb = usb_alloc_urb(isoc_bufs->num_packets, GFP_KERNEL); if (!urb) { em28xx_err("cannot alloc isoc_ctl.urb %i\n", i); - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); return -ENOMEM; } - dev->isoc_ctl.urb[i] = urb; + isoc_bufs->urb[i] = urb; - dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev, + isoc_bufs->transfer_buffer[i] = usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, &urb->transfer_dma); - if (!dev->isoc_ctl.transfer_buffer[i]) { + if (!isoc_bufs->transfer_buffer[i]) { em28xx_err("unable to allocate %i bytes for transfer" " buffer %i%s\n", sb_size, i, in_interrupt() ? " while in int" : ""); - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); return -ENOMEM; } - memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); + memset(isoc_bufs->transfer_buffer[i], 0, sb_size); /* FIXME: this is a hack - should be 'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK' should also be using 'desc.bInterval' */ pipe = usb_rcvisocpipe(dev->udev, - dev->mode == EM28XX_ANALOG_MODE ? + mode == EM28XX_ANALOG_MODE ? EM28XX_EP_ANALOG : EM28XX_EP_DIGITAL); usb_fill_int_urb(urb, dev->udev, pipe, - dev->isoc_ctl.transfer_buffer[i], sb_size, + isoc_bufs->transfer_buffer[i], sb_size, em28xx_irq_callback, dev, 1); - urb->number_of_packets = max_packets; + urb->number_of_packets = isoc_bufs->num_packets; urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; k = 0; - for (j = 0; j < max_packets; j++) { + for (j = 0; j < isoc_bufs->num_packets; j++) { urb->iso_frame_desc[j].offset = k; urb->iso_frame_desc[j].length = - dev->isoc_ctl.max_pkt_size; - k += dev->isoc_ctl.max_pkt_size; + isoc_bufs->max_pkt_size; + k += isoc_bufs->max_pkt_size; } } + return 0; +} +EXPORT_SYMBOL_GPL(em28xx_alloc_isoc); + +/* + * Allocate URBs and start IRQ + */ +int em28xx_init_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size, + int (*isoc_copy) (struct em28xx *dev, struct urb *urb)) +{ + struct em28xx_dmaqueue *dma_q = &dev->vidq; + struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq; + struct em28xx_usb_isoc_bufs *isoc_bufs; + int i; + int rc; + int alloc; + + em28xx_isocdbg("em28xx: called em28xx_init_isoc in mode %d\n", mode); + + dev->isoc_ctl.isoc_copy = isoc_copy; + + if (mode == EM28XX_DIGITAL_MODE) { + isoc_bufs = &dev->isoc_ctl.digital_bufs; + /* no need to free/alloc isoc buffers in digital mode */ + alloc = 0; + } else { + isoc_bufs = &dev->isoc_ctl.analog_bufs; + alloc = 1; + } + + if (alloc) { + rc = em28xx_alloc_isoc(dev, mode, max_packets, + num_bufs, max_pkt_size); + if (rc) + return rc; + } + init_waitqueue_head(&dma_q->wq); init_waitqueue_head(&vbi_dma_q->wq); em28xx_capture_start(dev, 1); /* submit urbs and enables IRQ */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); + for (i = 0; i < isoc_bufs->num_bufs; i++) { + rc = usb_submit_urb(isoc_bufs->urb[i], GFP_ATOMIC); if (rc) { em28xx_err("submit of urb %i failed (error=%i)\n", i, rc); - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); return rc; } } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index aabbf4854f66..503a8d5b5382 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -61,9 +61,6 @@ if (debug >= level) \ printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \ } while (0) -#define EM28XX_DVB_NUM_BUFS 5 -#define EM28XX_DVB_MAX_PACKETS 64 - struct em28xx_dvb { struct dvb_frontend *fe[2]; @@ -172,20 +169,21 @@ static int em28xx_start_streaming(struct em28xx_dvb *dvb) max_dvb_packet_size = dev->dvb_max_pkt_size; if (max_dvb_packet_size < 0) return max_dvb_packet_size; - dprintk(1, "Using %d buffers each with %d bytes\n", + dprintk(1, "Using %d buffers each with %d x %d bytes\n", EM28XX_DVB_NUM_BUFS, + EM28XX_DVB_MAX_PACKETS, max_dvb_packet_size); - return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, - EM28XX_DVB_NUM_BUFS, max_dvb_packet_size, - em28xx_dvb_isoc_copy); + return em28xx_init_isoc(dev, EM28XX_DIGITAL_MODE, + EM28XX_DVB_MAX_PACKETS, EM28XX_DVB_NUM_BUFS, + max_dvb_packet_size, em28xx_dvb_isoc_copy); } static int em28xx_stop_streaming(struct em28xx_dvb *dvb) { struct em28xx *dev = dvb->adapter.priv; - em28xx_uninit_isoc(dev); + em28xx_capture_start(dev, 0); em28xx_set_mode(dev, EM28XX_SUSPEND); @@ -327,6 +325,19 @@ struct drxk_config hauppauge_930c_drxk = { .chunk_size = 56, }; +struct drxk_config maxmedia_ub425_tc_drxk = { + .adr = 0x29, + .single_master = 1, + .no_i2c_bridge = 1, +}; + +struct drxk_config pctv_520e_drxk = { + .adr = 0x29, + .single_master = 1, + .microcode_name = "dvb-demod-drxk-pctv.fw", + .chunk_size = 58, +}; + static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) { struct em28xx_dvb *dvb = fe->sec_priv; @@ -460,6 +471,33 @@ static void terratec_h5_init(struct em28xx *dev) em28xx_gpio_set(dev, terratec_h5_end); }; +static void pctv_520e_init(struct em28xx *dev) +{ + /* + * Init TDA8295(?) analog demodulator. Looks like I2C traffic to + * digital demodulator and tuner are routed via TDA8295. + */ + int i; + struct { + unsigned char r[4]; + int len; + } regs[] = { + {{ 0x06, 0x02, 0x00, 0x31 }, 4}, + {{ 0x01, 0x02 }, 2}, + {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0xff, 0xaf }, 4}, + {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0x73, 0xaf }, 4}, + }; + + dev->i2c_client.addr = 0x82 >> 1; /* 0x41 */ + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); +}; + static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe) { /* Values extracted from a USB trace of the Terratec Windows driver */ @@ -938,6 +976,48 @@ static int em28xx_dvb_init(struct em28xx *dev) dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap, &em28xx_a8293_config); break; + case EM2874_BOARD_MAXMEDIA_UB425_TC: + /* attach demodulator */ + dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk, + &dev->i2c_adap); + + if (dvb->fe[0]) { + /* disable I2C-gate */ + dvb->fe[0]->ops.i2c_gate_ctrl = NULL; + + /* attach tuner */ + if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], + &dev->i2c_adap, 0x60)) { + dvb_frontend_detach(dvb->fe[0]); + result = -EINVAL; + goto out_free; + } + } + + /* TODO: we need drx-3913k firmware in order to support DVB-T */ + em28xx_info("MaxMedia UB425-TC: only DVB-C supported by that " \ + "driver version\n"); + + break; + case EM2884_BOARD_PCTV_510E: + case EM2884_BOARD_PCTV_520E: + pctv_520e_init(dev); + + /* attach demodulator */ + dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk, + &dev->i2c_adap); + + if (dvb->fe[0]) { + /* attach tuner */ + if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, + &dev->i2c_adap, + &em28xx_cxd2820r_tda18271_config)) { + dvb_frontend_detach(dvb->fe[0]); + result = -EINVAL; + goto out_free; + } + } + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 36f5a9bc8b76..a88e169dba23 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -41,14 +41,6 @@ static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); - -#define dprintk1(lvl, fmt, args...) \ -do { \ - if (i2c_debug >= lvl) { \ - printk(fmt, ##args); \ - } \ -} while (0) - #define dprintk2(lvl, fmt, args...) \ do { \ if (i2c_debug >= lvl) { \ diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 613300b51a9e..324b695c0724 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -760,17 +760,19 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, goto fail; } - if (!dev->isoc_ctl.num_bufs) + if (!dev->isoc_ctl.analog_bufs.num_bufs) urb_init = 1; if (urb_init) { if (em28xx_vbi_supported(dev) == 1) - rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS, + rc = em28xx_init_isoc(dev, EM28XX_ANALOG_MODE, + EM28XX_NUM_PACKETS, EM28XX_NUM_BUFS, dev->max_pkt_size, em28xx_isoc_copy_vbi); else - rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS, + rc = em28xx_init_isoc(dev, EM28XX_ANALOG_MODE, + EM28XX_NUM_PACKETS, EM28XX_NUM_BUFS, dev->max_pkt_size, em28xx_isoc_copy); @@ -2267,7 +2269,7 @@ static int em28xx_v4l2_close(struct file *filp) v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); /* do this before setting alternate! */ - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, EM28XX_ANALOG_MODE); em28xx_set_mode(dev, EM28XX_SUSPEND); /* set alternate 0 */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 22e252bcc41e..2868b19f8b54 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -125,6 +125,9 @@ #define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81 #define EM2884_BOARD_CINERGY_HTC_STICK 82 #define EM2860_BOARD_HT_VIDBOX_NW03 83 +#define EM2874_BOARD_MAXMEDIA_UB425_TC 84 +#define EM2884_BOARD_PCTV_510E 85 +#define EM2884_BOARD_PCTV_520E 86 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -151,12 +154,14 @@ /* number of buffers for isoc transfers */ #define EM28XX_NUM_BUFS 5 +#define EM28XX_DVB_NUM_BUFS 5 /* number of packets for each buffer windows requests only 64 packets .. so we better do the same this is what I found out for all alternate numbers there! */ #define EM28XX_NUM_PACKETS 64 +#define EM28XX_DVB_MAX_PACKETS 64 #define EM28XX_INTERLACED_DEFAULT 1 @@ -197,10 +202,13 @@ enum em28xx_mode { struct em28xx; -struct em28xx_usb_isoc_ctl { +struct em28xx_usb_isoc_bufs { /* max packet size of isoc transaction */ int max_pkt_size; + /* number of packets in each buffer */ + int num_packets; + /* number of allocated urbs */ int num_bufs; @@ -209,6 +217,14 @@ struct em28xx_usb_isoc_ctl { /* transfer buffers for isoc transfer */ char **transfer_buffer; +}; + +struct em28xx_usb_isoc_ctl { + /* isoc transfer buffers for analog mode */ + struct em28xx_usb_isoc_bufs analog_bufs; + + /* isoc transfer buffers for digital mode */ + struct em28xx_usb_isoc_bufs digital_bufs; /* Last buffer command and region */ u8 cmd; @@ -600,9 +616,6 @@ struct em28xx { unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ int dvb_alt; /* alternate for DVB */ unsigned int dvb_max_pkt_size; /* wMaxPacketSize for DVB */ - struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */ - char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc - transfer */ char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */ /* helper funcs that call usb_control_msg */ @@ -676,10 +689,12 @@ int em28xx_vbi_supported(struct em28xx *dev); int em28xx_set_outfmt(struct em28xx *dev); int em28xx_resolution_set(struct em28xx *dev); int em28xx_set_alternate(struct em28xx *dev); -int em28xx_init_isoc(struct em28xx *dev, int max_packets, - int num_bufs, int max_pkt_size, +int em28xx_alloc_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size); +int em28xx_init_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size, int (*isoc_copy) (struct em28xx *dev, struct urb *urb)); -void em28xx_uninit_isoc(struct em28xx *dev); +void em28xx_uninit_isoc(struct em28xx *dev, enum em28xx_mode mode); int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev); int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode); int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio); diff --git a/drivers/media/video/gspca/gl860/Makefile b/drivers/media/video/gspca/gl860/Makefile index f511eccdfd9c..773ea3426561 100644 --- a/drivers/media/video/gspca/gl860/Makefile +++ b/drivers/media/video/gspca/gl860/Makefile @@ -6,5 +6,5 @@ gspca_gl860-objs := gl860.o \ gl860-ov9655.o \ gl860-mi2020.o -ccflags-y += -Idrivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/video/gspca diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/video/gspca/m5602/Makefile index 7f52961f439c..575b75bacb62 100644 --- a/drivers/media/video/gspca/m5602/Makefile +++ b/drivers/media/video/gspca/m5602/Makefile @@ -8,4 +8,4 @@ gspca_m5602-objs := m5602_core.o \ m5602_s5k83a.o \ m5602_s5k4aa.o -ccflags-y += -Idrivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/video/gspca diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c index fbfa02affa13..e6601b886032 100644 --- a/drivers/media/video/gspca/ov534_9.c +++ b/drivers/media/video/gspca/ov534_9.c @@ -1107,16 +1107,34 @@ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 val; + s8 sval; if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS)) return; - val = sd->ctrls[BRIGHTNESS].val; - if (val < 8) - val = 15 - val; /* f .. 8 */ - else - val = val - 8; /* 0 .. 7 */ - sccb_write(gspca_dev, 0x55, /* brtn - brightness adjustment */ - 0x0f | (val << 4)); + if (sd->sensor == SENSOR_OV562x) { + sval = sd->ctrls[BRIGHTNESS].val; + val = 0x76; + val += sval; + sccb_write(gspca_dev, 0x24, val); + val = 0x6a; + val += sval; + sccb_write(gspca_dev, 0x25, val); + if (sval < -40) + val = 0x71; + else if (sval < 20) + val = 0x94; + else + val = 0xe6; + sccb_write(gspca_dev, 0x26, val); + } else { + val = sd->ctrls[BRIGHTNESS].val; + if (val < 8) + val = 15 - val; /* f .. 8 */ + else + val = val - 8; /* 0 .. 7 */ + sccb_write(gspca_dev, 0x55, /* brtn - brightness adjustment */ + 0x0f | (val << 4)); + } } static void setcontrast(struct gspca_dev *gspca_dev) @@ -1339,7 +1357,16 @@ static int sd_init(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x56, 0x17); } else if ((sensor_id & 0xfff0) == 0x5620) { sd->sensor = SENSOR_OV562x; - + gspca_dev->ctrl_dis = (1 << CONTRAST) | + (1 << AUTOGAIN) | + (1 << EXPOSURE) | + (1 << SHARPNESS) | + (1 << SATUR) | + (1 << LIGHTFREQ); + + sd->ctrls[BRIGHTNESS].min = -90; + sd->ctrls[BRIGHTNESS].max = 90; + sd->ctrls[BRIGHTNESS].def = 0; gspca_dev->cam.cam_mode = ov562x_mode; gspca_dev->cam.nmodes = ARRAY_SIZE(ov562x_mode); @@ -1360,8 +1387,12 @@ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->sensor == SENSOR_OV971x || sd->sensor == SENSOR_OV562x) + if (sd->sensor == SENSOR_OV971x) return gspca_dev->usb_err; + else if (sd->sensor == SENSOR_OV562x) { + setbrightness(gspca_dev); + return gspca_dev->usb_err; + } switch (gspca_dev->curr_mode) { case QVGA_MODE: /* 320x240 */ sccb_w_array(gspca_dev, ov965x_start_1_vga, diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c index 9db2b34d172c..30662fccb0cf 100644 --- a/drivers/media/video/gspca/pac7302.c +++ b/drivers/media/video/gspca/pac7302.c @@ -1,8 +1,8 @@ /* - * Pixart PAC7302 library - * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li + * Pixart PAC7302 driver * - * V4L2 by Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2008-2012 Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li * * Separated from Pixart PAC7311 library by Márton Németh * Camera button input handling by Márton Németh <nm127@freemail.hu> @@ -63,67 +63,61 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#define MODULE_NAME "pac7302" - #include <linux/input.h> #include <media/v4l2-chip-ident.h> #include "gspca.h" +/* Include pac common sof detection functions */ +#include "pac_common.h" -MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li"); +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, " + "Thomas Kaiser thomas@kaiser-linux.li"); MODULE_DESCRIPTION("Pixart PAC7302"); MODULE_LICENSE("GPL"); +enum e_ctrl { + BRIGHTNESS, + CONTRAST, + COLORS, + WHITE_BALANCE, + RED_BALANCE, + BLUE_BALANCE, + GAIN, + AUTOGAIN, + EXPOSURE, + VFLIP, + HFLIP, + NCTRLS /* number of controls */ +}; + /* specific webcam descriptor for pac7302 */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - unsigned char brightness; - unsigned char contrast; - unsigned char colors; - unsigned char white_balance; - unsigned char red_balance; - unsigned char blue_balance; - unsigned char gain; - unsigned char autogain; - unsigned short exposure; - __u8 hflip; - __u8 vflip; + struct gspca_ctrl ctrls[NCTRLS]; + u8 flags; #define FL_HFLIP 0x01 /* mirrored by default */ #define FL_VFLIP 0x02 /* vertical flipped by default */ u8 sof_read; - u8 autogain_ignore_frames; + s8 autogain_ignore_frames; atomic_t avg_lum; }; /* V4L2 controls supported by the driver */ -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setredbalance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getredbalance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setbluebalance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbluebalance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); -static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); +static void setbrightcont(struct gspca_dev *gspca_dev); +static void setcolors(struct gspca_dev *gspca_dev); +static void setwhitebalance(struct gspca_dev *gspca_dev); +static void setredbalance(struct gspca_dev *gspca_dev); +static void setbluebalance(struct gspca_dev *gspca_dev); +static void setgain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); +static void setautogain(struct gspca_dev *gspca_dev); +static void sethvflip(struct gspca_dev *gspca_dev); static const struct ctrl sd_ctrls[] = { - { +[BRIGHTNESS] = { { .id = V4L2_CID_BRIGHTNESS, .type = V4L2_CTRL_TYPE_INTEGER, @@ -132,13 +126,11 @@ static const struct ctrl sd_ctrls[] = { #define BRIGHTNESS_MAX 0x20 .maximum = BRIGHTNESS_MAX, .step = 1, -#define BRIGHTNESS_DEF 0x10 - .default_value = BRIGHTNESS_DEF, + .default_value = 0x10, }, - .set = sd_setbrightness, - .get = sd_getbrightness, + .set_control = setbrightcont }, - { +[CONTRAST] = { { .id = V4L2_CID_CONTRAST, .type = V4L2_CTRL_TYPE_INTEGER, @@ -147,13 +139,11 @@ static const struct ctrl sd_ctrls[] = { #define CONTRAST_MAX 255 .maximum = CONTRAST_MAX, .step = 1, -#define CONTRAST_DEF 127 - .default_value = CONTRAST_DEF, + .default_value = 127, }, - .set = sd_setcontrast, - .get = sd_getcontrast, + .set_control = setbrightcont }, - { +[COLORS] = { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, @@ -162,13 +152,11 @@ static const struct ctrl sd_ctrls[] = { #define COLOR_MAX 255 .maximum = COLOR_MAX, .step = 1, -#define COLOR_DEF 127 - .default_value = COLOR_DEF, + .default_value = 127 }, - .set = sd_setcolors, - .get = sd_getcolors, + .set_control = setcolors }, - { +[WHITE_BALANCE] = { { .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -176,13 +164,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, -#define WHITEBALANCE_DEF 4 - .default_value = WHITEBALANCE_DEF, + .default_value = 4, }, - .set = sd_setwhitebalance, - .get = sd_getwhitebalance, + .set_control = setwhitebalance }, - { +[RED_BALANCE] = { { .id = V4L2_CID_RED_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -190,13 +176,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 3, .step = 1, -#define REDBALANCE_DEF 1 - .default_value = REDBALANCE_DEF, + .default_value = 1, }, - .set = sd_setredbalance, - .get = sd_getredbalance, + .set_control = setredbalance }, - { +[BLUE_BALANCE] = { { .id = V4L2_CID_BLUE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -204,29 +188,25 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 3, .step = 1, -#define BLUEBALANCE_DEF 1 - .default_value = BLUEBALANCE_DEF, + .default_value = 1, }, - .set = sd_setbluebalance, - .get = sd_getbluebalance, + .set_control = setbluebalance }, - { +[GAIN] = { { .id = V4L2_CID_GAIN, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Gain", .minimum = 0, -#define GAIN_MAX 255 - .maximum = GAIN_MAX, + .maximum = 255, .step = 1, #define GAIN_DEF 127 #define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */ .default_value = GAIN_DEF, }, - .set = sd_setgain, - .get = sd_getgain, + .set_control = setgain }, - { +[EXPOSURE] = { { .id = V4L2_CID_EXPOSURE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -238,10 +218,9 @@ static const struct ctrl sd_ctrls[] = { #define EXPOSURE_KNEE 133 /* 66 ms / 15 fps */ .default_value = EXPOSURE_DEF, }, - .set = sd_setexposure, - .get = sd_getexposure, + .set_control = setexposure }, - { +[AUTOGAIN] = { { .id = V4L2_CID_AUTOGAIN, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -252,10 +231,9 @@ static const struct ctrl sd_ctrls[] = { #define AUTOGAIN_DEF 1 .default_value = AUTOGAIN_DEF, }, - .set = sd_setautogain, - .get = sd_getautogain, + .set_control = setautogain, }, - { +[HFLIP] = { { .id = V4L2_CID_HFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -263,13 +241,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define HFLIP_DEF 0 - .default_value = HFLIP_DEF, + .default_value = 0, }, - .set = sd_sethflip, - .get = sd_gethflip, + .set_control = sethvflip, }, - { +[VFLIP] = { { .id = V4L2_CID_VFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -277,11 +253,9 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEF 0 - .default_value = VFLIP_DEF, + .default_value = 0, }, - .set = sd_setvflip, - .get = sd_getvflip, + .set_control = sethvflip }, }; @@ -290,21 +264,21 @@ static const struct v4l2_pix_format vga_mode[] = { .bytesperline = 640, .sizeimage = 640 * 480 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, - .priv = 0}, + }, }; #define LOAD_PAGE3 255 #define END_OF_SEQUENCE 0 /* pac 7302 */ -static const __u8 init_7302[] = { +static const u8 init_7302[] = { /* index,value */ 0xff, 0x01, /* page 1 */ 0x78, 0x00, /* deactivate */ 0xff, 0x01, 0x78, 0x40, /* led off */ }; -static const __u8 start_7302[] = { +static const u8 start_7302[] = { /* index, len, [value]* */ 0xff, 1, 0x00, /* page 0 */ 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80, @@ -319,7 +293,7 @@ static const __u8 start_7302[] = { 0x43, 11, 0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11, 0x00, 0x54, 0x11, 0x55, 1, 0x00, - 0x62, 4, 0x10, 0x1e, 0x1e, 0x18, + 0x62, 4, 0x10, 0x1e, 0x1e, 0x18, 0x6b, 1, 0x00, 0x6e, 3, 0x08, 0x06, 0x00, 0x72, 3, 0x00, 0xff, 0x00, @@ -370,7 +344,7 @@ static const __u8 start_7302[] = { #define SKIP 0xaa /* page 3 - the value SKIP says skip the index - see reg_w_page() */ -static const __u8 page3_7302[] = { +static const u8 page3_7302[] = { 0x90, 0x40, 0x03, 0x00, 0xc0, 0x01, 0x14, 0x16, 0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00, 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -394,7 +368,7 @@ static const __u8 page3_7302[] = { }; static void reg_w_buf(struct gspca_dev *gspca_dev, - __u8 index, + u8 index, const u8 *buffer, int len) { int ret; @@ -410,7 +384,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, index, gspca_dev->usb_buf, len, 500); if (ret < 0) { - pr_err("reg_w_buf failed index 0x%02x, error %d\n", + pr_err("reg_w_buf failed i: %02x error %d\n", index, ret); gspca_dev->usb_err = ret; } @@ -418,8 +392,8 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, static void reg_w(struct gspca_dev *gspca_dev, - __u8 index, - __u8 value) + u8 index, + u8 value) { int ret; @@ -433,14 +407,14 @@ static void reg_w(struct gspca_dev *gspca_dev, 0, index, gspca_dev->usb_buf, 1, 500); if (ret < 0) { - pr_err("reg_w() failed index 0x%02x, value 0x%02x, error %d\n", + pr_err("reg_w() failed i: %02x v: %02x error %d\n", index, value, ret); gspca_dev->usb_err = ret; } } static void reg_w_seq(struct gspca_dev *gspca_dev, - const __u8 *seq, int len) + const u8 *seq, int len) { while (--len >= 0) { reg_w(gspca_dev, seq[0], seq[1]); @@ -450,7 +424,7 @@ static void reg_w_seq(struct gspca_dev *gspca_dev, /* load the beginning of a page */ static void reg_w_page(struct gspca_dev *gspca_dev, - const __u8 *page, int len) + const u8 *page, int len) { int index; int ret = 0; @@ -468,7 +442,7 @@ static void reg_w_page(struct gspca_dev *gspca_dev, 0, index, gspca_dev->usb_buf, 1, 500); if (ret < 0) { - pr_err("reg_w_page() failed index 0x%02x, value 0x%02x, error %d\n", + pr_err("reg_w_page() failed i: %02x v: %02x error %d\n", index, page[index], ret); gspca_dev->usb_err = ret; break; @@ -478,8 +452,8 @@ static void reg_w_page(struct gspca_dev *gspca_dev, /* output a variable sequence */ static void reg_w_var(struct gspca_dev *gspca_dev, - const __u8 *seq, - const __u8 *page3, unsigned int page3_len) + const u8 *seq, + const u8 *page3, unsigned int page3_len) { int index, len; @@ -493,11 +467,13 @@ static void reg_w_var(struct gspca_dev *gspca_dev, reg_w_page(gspca_dev, page3, page3_len); break; default: +#ifdef GSPCA_DEBUG if (len > USB_BUF_SZ) { PDEBUG(D_ERR|D_STREAM, "Incorrect variable sequence"); return; } +#endif while (len > 0) { if (len < 8) { reg_w_buf(gspca_dev, @@ -524,21 +500,11 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; - PDEBUG(D_CONF, "Find Sensor PAC7302"); cam->cam_mode = vga_mode; /* only 640x480 */ cam->nmodes = ARRAY_SIZE(vga_mode); - sd->brightness = BRIGHTNESS_DEF; - sd->contrast = CONTRAST_DEF; - sd->colors = COLOR_DEF; - sd->white_balance = WHITEBALANCE_DEF; - sd->red_balance = REDBALANCE_DEF; - sd->blue_balance = BLUEBALANCE_DEF; - sd->gain = GAIN_DEF; - sd->exposure = EXPOSURE_DEF; - sd->autogain = AUTOGAIN_DEF; - sd->hflip = HFLIP_DEF; - sd->vflip = VFLIP_DEF; + gspca_dev->cam.ctrls = sd->ctrls; + sd->flags = id->driver_info; return 0; } @@ -548,19 +514,19 @@ static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i, v; - static const __u8 max[10] = + static const u8 max[10] = {0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb, 0xd4, 0xec}; - static const __u8 delta[10] = + static const u8 delta[10] = {0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17, 0x11, 0x0b}; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ for (i = 0; i < 10; i++) { v = max[i]; - v += (sd->brightness - BRIGHTNESS_MAX) + v += (sd->ctrls[BRIGHTNESS].val - BRIGHTNESS_MAX) * 150 / BRIGHTNESS_MAX; /* 200 ? */ - v -= delta[i] * sd->contrast / CONTRAST_MAX; + v -= delta[i] * sd->ctrls[CONTRAST].val / CONTRAST_MAX; if (v < 0) v = 0; else if (v > 0xff) @@ -584,12 +550,11 @@ static void setcolors(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x11, 0x01); reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ for (i = 0; i < 9; i++) { - v = a[i] * sd->colors / COLOR_MAX + b[i]; + v = a[i] * sd->ctrls[COLORS].val / COLOR_MAX + b[i]; reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07); reg_w(gspca_dev, 0x0f + 2 * i + 1, v); } reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); } static void setwhitebalance(struct gspca_dev *gspca_dev) @@ -597,10 +562,9 @@ static void setwhitebalance(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xc6, sd->white_balance); + reg_w(gspca_dev, 0xc6, sd->ctrls[WHITE_BALANCE].val); reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "white_balance: %i", sd->white_balance); } static void setredbalance(struct gspca_dev *gspca_dev) @@ -608,10 +572,9 @@ static void setredbalance(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xc5, sd->red_balance); + reg_w(gspca_dev, 0xc5, sd->ctrls[RED_BALANCE].val); reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "red_balance: %i", sd->red_balance); } static void setbluebalance(struct gspca_dev *gspca_dev) @@ -619,10 +582,9 @@ static void setbluebalance(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xc7, sd->blue_balance); + reg_w(gspca_dev, 0xc7, sd->ctrls[BLUE_BALANCE].val); reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "blue_balance: %i", sd->blue_balance); } static void setgain(struct gspca_dev *gspca_dev) @@ -630,7 +592,7 @@ static void setgain(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - reg_w(gspca_dev, 0x10, sd->gain >> 3); + reg_w(gspca_dev, 0x10, sd->ctrls[GAIN].val >> 3); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); @@ -639,13 +601,13 @@ static void setgain(struct gspca_dev *gspca_dev) static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 clockdiv; - __u16 exposure; + u8 clockdiv; + u16 exposure; /* register 2 of frame 3 contains the clock divider configuring the no fps according to the formula: 90 / reg. sd->exposure is the desired exposure time in 0.5 ms. */ - clockdiv = (90 * sd->exposure + 1999) / 2000; + clockdiv = (90 * sd->ctrls[EXPOSURE].val + 1999) / 2000; /* Note clockdiv = 3 also works, but when running at 30 fps, depending on the scene being recorded, the camera switches to another @@ -664,7 +626,7 @@ static void setexposure(struct gspca_dev *gspca_dev) /* frame exposure time in ms = 1000 * clockdiv / 90 -> exposure = (sd->exposure / 2) * 448 / (1000 * clockdiv / 90) */ - exposure = (sd->exposure * 45 * 448) / (1000 * clockdiv); + exposure = (sd->ctrls[EXPOSURE].val * 45 * 448) / (1000 * clockdiv); /* 0 = use full frametime, 448 = no exposure, reverse it */ exposure = 448 - exposure; @@ -677,15 +639,35 @@ static void setexposure(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x11, 0x01); } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* when switching to autogain set defaults to make sure + we are on a valid point of the autogain gain / + exposure knee graph, and give this change time to + take effect before doing autogain. */ + if (sd->ctrls[AUTOGAIN].val) { + sd->ctrls[EXPOSURE].val = EXPOSURE_DEF; + sd->ctrls[GAIN].val = GAIN_DEF; + sd->autogain_ignore_frames = + PAC_AUTOGAIN_IGNORE_FRAMES; + } else { + sd->autogain_ignore_frames = -1; + } + setexposure(gspca_dev); + setgain(gspca_dev); +} + static void sethvflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 data, hflip, vflip; - hflip = sd->hflip; + hflip = sd->ctrls[HFLIP].val; if (sd->flags & FL_HFLIP) hflip = !hflip; - vflip = sd->vflip; + vflip = sd->ctrls[VFLIP].val; if (sd->flags & FL_VFLIP) vflip = !vflip; @@ -708,8 +690,6 @@ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - sd->sof_read = 0; - reg_w_var(gspca_dev, start_7302, page3_7302, sizeof(page3_7302)); setbrightcont(gspca_dev); @@ -717,15 +697,13 @@ static int sd_start(struct gspca_dev *gspca_dev) setwhitebalance(gspca_dev); setredbalance(gspca_dev); setbluebalance(gspca_dev); - setgain(gspca_dev); - setexposure(gspca_dev); + setautogain(gspca_dev); sethvflip(gspca_dev); /* only resolution 640x480 is supported for pac7302 */ sd->sof_read = 0; - sd->autogain_ignore_frames = 0; - atomic_set(&sd->avg_lum, -1); + atomic_set(&sd->avg_lum, 270 + sd->ctrls[BRIGHTNESS].val); /* start stream */ reg_w(gspca_dev, 0xff, 0x01); @@ -751,8 +729,10 @@ static void sd_stop0(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x40); } -/* Include pac common sof detection functions */ -#include "pac_common.h" +/* !! coarse_grained_expo_autogain is not used !! */ +#define exp_too_low_cnt flags +#define exp_too_high_cnt sof_read +#include "autogain_functions.h" static void do_autogain(struct gspca_dev *gspca_dev) { @@ -761,65 +741,44 @@ static void do_autogain(struct gspca_dev *gspca_dev) int desired_lum; const int deadzone = 30; - if (avg_lum == -1) + if (sd->autogain_ignore_frames < 0) return; - desired_lum = 270 + sd->brightness; - - if (sd->autogain_ignore_frames > 0) + if (sd->autogain_ignore_frames > 0) { sd->autogain_ignore_frames--; - else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum, - deadzone, GAIN_KNEE, EXPOSURE_KNEE)) + } else { + desired_lum = 270 + sd->ctrls[BRIGHTNESS].val; + + auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum, + deadzone, GAIN_KNEE, EXPOSURE_KNEE); sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; + } } -/* JPEG header, part 1 */ -static const unsigned char pac_jpeg_header1[] = { - 0xff, 0xd8, /* SOI: Start of Image */ - - 0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */ - 0x00, 0x11, /* length = 17 bytes (including this length field) */ - 0x08 /* Precision: 8 */ - /* 2 bytes is placed here: number of image lines */ - /* 2 bytes is placed here: samples per line */ -}; - -/* JPEG header, continued */ -static const unsigned char pac_jpeg_header2[] = { - 0x03, /* Number of image components: 3 */ - 0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */ - 0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */ - 0x03, 0x11, 0x01, /* ID=3, Subsampling 2x1, Quantization table: 1 */ - - 0xff, 0xda, /* SOS: Start Of Scan */ - 0x00, 0x0c, /* length = 12 bytes (including this length field) */ - 0x03, /* number of components: 3 */ - 0x01, 0x00, /* selector 1, table 0x00 */ - 0x02, 0x11, /* selector 2, table 0x11 */ - 0x03, 0x11, /* selector 3, table 0x11 */ - 0x00, 0x3f, /* Spectral selection: 0 .. 63 */ - 0x00 /* Successive approximation: 0 */ +/* JPEG header */ +static const u8 jpeg_header[] = { + 0xff, 0xd8, /* SOI: Start of Image */ + + 0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */ + 0x00, 0x11, /* length = 17 bytes (including this length field) */ + 0x08, /* Precision: 8 */ + 0x02, 0x80, /* height = 640 (image rotated) */ + 0x01, 0xe0, /* width = 480 */ + 0x03, /* Number of image components: 3 */ + 0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */ + 0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */ + 0x03, 0x11, 0x01, /* ID=3, Subsampling 2x1, Quantization table: 1 */ + + 0xff, 0xda, /* SOS: Start Of Scan */ + 0x00, 0x0c, /* length = 12 bytes (including this length field) */ + 0x03, /* number of components: 3 */ + 0x01, 0x00, /* selector 1, table 0x00 */ + 0x02, 0x11, /* selector 2, table 0x11 */ + 0x03, 0x11, /* selector 3, table 0x11 */ + 0x00, 0x3f, /* Spectral selection: 0 .. 63 */ + 0x00 /* Successive approximation: 0 */ }; -static void pac_start_frame(struct gspca_dev *gspca_dev, - __u16 lines, __u16 samples_per_line) -{ - unsigned char tmpbuf[4]; - - gspca_frame_add(gspca_dev, FIRST_PACKET, - pac_jpeg_header1, sizeof(pac_jpeg_header1)); - - tmpbuf[0] = lines >> 8; - tmpbuf[1] = lines & 0xff; - tmpbuf[2] = samples_per_line >> 8; - tmpbuf[3] = samples_per_line & 0xff; - - gspca_frame_add(gspca_dev, INTER_PACKET, - tmpbuf, sizeof(tmpbuf)); - gspca_frame_add(gspca_dev, INTER_PACKET, - pac_jpeg_header2, sizeof(pac_jpeg_header2)); -} - /* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ @@ -827,7 +786,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, { struct sd *sd = (struct sd *) gspca_dev; u8 *image; - unsigned char *sof; + u8 *sof; sof = pac_find_sof(&sd->sof_read, data, len); if (sof) { @@ -864,234 +823,21 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, n >= lum_offset) atomic_set(&sd->avg_lum, data[-lum_offset] + data[-lum_offset + 1]); - else - atomic_set(&sd->avg_lum, -1); /* Start the new frame with the jpeg header */ /* The PAC7302 has the image rotated 90 degrees */ - pac_start_frame(gspca_dev, - gspca_dev->width, gspca_dev->height); + gspca_frame_add(gspca_dev, FIRST_PACKET, + jpeg_header, sizeof jpeg_header); } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->brightness = val; - if (gspca_dev->streaming) - setbrightcont(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->brightness; - return 0; -} - -static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->contrast = val; - if (gspca_dev->streaming) - setbrightcont(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->contrast; - return 0; -} - -static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->colors = val; - if (gspca_dev->streaming) - setcolors(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->colors; - return 0; -} - -static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->white_balance = val; - if (gspca_dev->streaming) - setwhitebalance(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->white_balance; - return 0; -} - -static int sd_setredbalance(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->red_balance = val; - if (gspca_dev->streaming) - setredbalance(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getredbalance(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->red_balance; - return 0; -} - -static int sd_setbluebalance(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->blue_balance = val; - if (gspca_dev->streaming) - setbluebalance(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getbluebalance(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->blue_balance; - return 0; -} - -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gain = val; - if (gspca_dev->streaming) - setgain(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->gain; - return 0; -} - -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->exposure = val; - if (gspca_dev->streaming) - setexposure(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->exposure; - return 0; -} - -static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->autogain = val; - /* when switching to autogain set defaults to make sure - we are on a valid point of the autogain gain / - exposure knee graph, and give this change time to - take effect before doing autogain. */ - if (sd->autogain) { - sd->exposure = EXPOSURE_DEF; - sd->gain = GAIN_DEF; - if (gspca_dev->streaming) { - sd->autogain_ignore_frames = - PAC_AUTOGAIN_IGNORE_FRAMES; - setexposure(gspca_dev); - setgain(gspca_dev); - } - } - - return gspca_dev->usb_err; -} - -static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->autogain; - return 0; -} - -static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->hflip = val; - if (gspca_dev->streaming) - sethvflip(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->hflip; - return 0; -} - -static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->vflip = val; - if (gspca_dev->streaming) - sethvflip(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->vflip; - return 0; -} - #ifdef CONFIG_VIDEO_ADV_DEBUG static int sd_dbg_s_register(struct gspca_dev *gspca_dev, struct v4l2_dbg_register *reg) { - __u8 index; - __u8 value; + u8 index; + u8 value; /* reg->reg: bit0..15: reserved for register index (wIndex is 16bit long on the USB bus) @@ -1103,8 +849,8 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, ) { /* Currently writing to page 0 is only supported. */ /* reg_w() only supports 8bit index */ - index = reg->reg & 0x000000ff; - value = reg->val & 0x000000ff; + index = reg->reg; + value = reg->val; /* Note that there shall be no access to other page by any other function between the page swith and @@ -1165,7 +911,7 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, /* sub-driver description for pac7302 */ static const struct sd_desc sd_desc = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, @@ -1187,6 +933,7 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06f8, 0x3009)}, + {USB_DEVICE(0x06f8, 0x301b)}, {USB_DEVICE(0x093a, 0x2620)}, {USB_DEVICE(0x093a, 0x2621)}, {USB_DEVICE(0x093a, 0x2622), .driver_info = FL_VFLIP}, @@ -1211,7 +958,7 @@ static int sd_probe(struct usb_interface *intf, } static struct usb_driver sd_driver = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 9e198b45c3c8..7e71aa2d2522 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -1,5 +1,7 @@ /* * Sonix sn9c201 sn9c202 library + * + * Copyright (C) 2012 Jean-Francois Moine <http://moinejf.free.fr> * Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com> * Copyright (C) 2009 Brian Johnson <brijohn@gmail.com> * @@ -33,8 +35,6 @@ MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, " MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver"); MODULE_LICENSE("GPL"); -#define MODULE_NAME "sn9c20x" - /* * Pixel format private data */ @@ -66,10 +66,37 @@ MODULE_LICENSE("GPL"); #define LED_REVERSE 0x2 /* some cameras unset gpio to turn on leds */ #define FLIP_DETECT 0x4 +enum e_ctrl { + BRIGHTNESS, + CONTRAST, + SATURATION, + HUE, + GAMMA, + BLUE, + RED, + VFLIP, + HFLIP, + EXPOSURE, + GAIN, + AUTOGAIN, + QUALITY, + NCTRLS /* number of controls */ +}; + /* specific webcam descriptor */ struct sd { struct gspca_dev gspca_dev; + struct gspca_ctrl ctrls[NCTRLS]; + + struct work_struct work; + struct workqueue_struct *work_thread; + + u32 pktsz; /* (used by pkt_scan) */ + u16 npkt; + s8 nchg; + u8 fmt; /* (used for JPEG QTAB update */ + #define MIN_AVG_LUM 80 #define MAX_AVG_LUM 130 atomic_t avg_lum; @@ -77,31 +104,18 @@ struct sd { u8 older_step; u8 exposure_step; - u8 brightness; - u8 contrast; - u8 saturation; - s16 hue; - u8 gamma; - u8 red; - u8 blue; - - u8 hflip; - u8 vflip; - u8 gain; - u16 exposure; - u8 auto_exposure; - u8 i2c_addr; u8 sensor; u8 hstart; u8 vstart; u8 jpeg_hdr[JPEG_HDR_SZ]; - u8 quality; u8 flags; }; +static void qual_upd(struct work_struct *work); + struct i2c_reg_u8 { u8 reg; u8 val; @@ -112,31 +126,6 @@ struct i2c_reg_u16 { u16 val; }; -static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val); -static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val); -static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val); -static int sd_sethue(struct gspca_dev *gspca_dev, s32 val); -static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val); -static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val); -static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val); -static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val); -static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val); -static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val); -static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setgain(struct gspca_dev *gspca_dev, s32 val); -static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val); -static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val); -static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val); - static const struct dmi_system_id flip_dmi_table[] = { { .ident = "MSI MS-1034", @@ -177,9 +166,16 @@ static const struct dmi_system_id flip_dmi_table[] = { {} }; -static const struct ctrl sd_ctrls[] = { - { -#define BRIGHTNESS_IDX 0 +static void set_cmatrix(struct gspca_dev *gspca_dev); +static void set_gamma(struct gspca_dev *gspca_dev); +static void set_redblue(struct gspca_dev *gspca_dev); +static void set_hvflip(struct gspca_dev *gspca_dev); +static void set_exposure(struct gspca_dev *gspca_dev); +static void set_gain(struct gspca_dev *gspca_dev); +static void set_quality(struct gspca_dev *gspca_dev); + +static const struct ctrl sd_ctrls[NCTRLS] = { +[BRIGHTNESS] = { { .id = V4L2_CID_BRIGHTNESS, .type = V4L2_CTRL_TYPE_INTEGER, @@ -187,14 +183,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define BRIGHTNESS_DEFAULT 0x7f - .default_value = BRIGHTNESS_DEFAULT, + .default_value = 0x7f }, - .set = sd_setbrightness, - .get = sd_getbrightness, + .set_control = set_cmatrix }, - { -#define CONTRAST_IDX 1 +[CONTRAST] = { { .id = V4L2_CID_CONTRAST, .type = V4L2_CTRL_TYPE_INTEGER, @@ -202,14 +195,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define CONTRAST_DEFAULT 0x7f - .default_value = CONTRAST_DEFAULT, + .default_value = 0x7f }, - .set = sd_setcontrast, - .get = sd_getcontrast, + .set_control = set_cmatrix }, - { -#define SATURATION_IDX 2 +[SATURATION] = { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, @@ -217,14 +207,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define SATURATION_DEFAULT 0x7f - .default_value = SATURATION_DEFAULT, + .default_value = 0x7f }, - .set = sd_setsaturation, - .get = sd_getsaturation, + .set_control = set_cmatrix }, - { -#define HUE_IDX 3 +[HUE] = { { .id = V4L2_CID_HUE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -232,14 +219,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = -180, .maximum = 180, .step = 1, -#define HUE_DEFAULT 0 - .default_value = HUE_DEFAULT, + .default_value = 0 }, - .set = sd_sethue, - .get = sd_gethue, + .set_control = set_cmatrix }, - { -#define GAMMA_IDX 4 +[GAMMA] = { { .id = V4L2_CID_GAMMA, .type = V4L2_CTRL_TYPE_INTEGER, @@ -247,14 +231,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define GAMMA_DEFAULT 0x10 - .default_value = GAMMA_DEFAULT, + .default_value = 0x10 }, - .set = sd_setgamma, - .get = sd_getgamma, + .set_control = set_gamma }, - { -#define BLUE_IDX 5 +[BLUE] = { { .id = V4L2_CID_BLUE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -262,14 +243,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0x7f, .step = 1, -#define BLUE_DEFAULT 0x28 - .default_value = BLUE_DEFAULT, + .default_value = 0x28 }, - .set = sd_setbluebalance, - .get = sd_getbluebalance, + .set_control = set_redblue }, - { -#define RED_IDX 6 +[RED] = { { .id = V4L2_CID_RED_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -277,14 +255,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0x7f, .step = 1, -#define RED_DEFAULT 0x28 - .default_value = RED_DEFAULT, + .default_value = 0x28 }, - .set = sd_setredbalance, - .get = sd_getredbalance, + .set_control = set_redblue }, - { -#define HFLIP_IDX 7 +[HFLIP] = { { .id = V4L2_CID_HFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -292,14 +267,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define HFLIP_DEFAULT 0 - .default_value = HFLIP_DEFAULT, + .default_value = 0, }, - .set = sd_sethflip, - .get = sd_gethflip, + .set_control = set_hvflip }, - { -#define VFLIP_IDX 8 +[VFLIP] = { { .id = V4L2_CID_VFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -307,14 +279,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEFAULT 0 - .default_value = VFLIP_DEFAULT, + .default_value = 0, }, - .set = sd_setvflip, - .get = sd_getvflip, + .set_control = set_hvflip }, - { -#define EXPOSURE_IDX 9 +[EXPOSURE] = { { .id = V4L2_CID_EXPOSURE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -322,14 +291,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0x1780, .step = 1, -#define EXPOSURE_DEFAULT 0x33 - .default_value = EXPOSURE_DEFAULT, + .default_value = 0x33, }, - .set = sd_setexposure, - .get = sd_getexposure, + .set_control = set_exposure }, - { -#define GAIN_IDX 10 +[GAIN] = { { .id = V4L2_CID_GAIN, .type = V4L2_CTRL_TYPE_INTEGER, @@ -337,14 +303,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 28, .step = 1, -#define GAIN_DEFAULT 0x00 - .default_value = GAIN_DEFAULT, + .default_value = 0, }, - .set = sd_setgain, - .get = sd_getgain, + .set_control = set_gain }, - { -#define AUTOGAIN_IDX 11 +[AUTOGAIN] = { { .id = V4L2_CID_AUTOGAIN, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -352,11 +315,23 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define AUTO_EXPOSURE_DEFAULT 1 - .default_value = AUTO_EXPOSURE_DEFAULT, + .default_value = 1, + }, + }, +[QUALITY] = { + { + .id = V4L2_CID_JPEG_COMPRESSION_QUALITY, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Compression Quality", +#define QUALITY_MIN 50 +#define QUALITY_MAX 90 +#define QUALITY_DEF 80 + .minimum = QUALITY_MIN, + .maximum = QUALITY_MAX, + .step = 1, + .default_value = QUALITY_DEF, }, - .set = sd_setautoexposure, - .get = sd_getautoexposure, + .set_control = set_quality }, }; @@ -876,7 +851,7 @@ static u8 hv7131r_gain[] = { }; static struct i2c_reg_u8 soi968_init[] = { - {0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f}, + {0x0c, 0x00}, {0x0f, 0x1f}, {0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00}, {0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c}, {0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff}, @@ -902,7 +877,7 @@ static struct i2c_reg_u8 ov7660_init[] = { }; static struct i2c_reg_u8 ov7670_init[] = { - {0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01}, + {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01}, {0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00}, {0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0}, {0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00}, @@ -959,7 +934,7 @@ static struct i2c_reg_u8 ov7670_init[] = { }; static struct i2c_reg_u8 ov9650_init[] = { - {0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78}, + {0x00, 0x00}, {0x01, 0x78}, {0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03}, {0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00}, {0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00}, @@ -989,7 +964,7 @@ static struct i2c_reg_u8 ov9650_init[] = { }; static struct i2c_reg_u8 ov9655_init[] = { - {0x12, 0x80}, {0x0e, 0x61}, {0x11, 0x80}, {0x13, 0xba}, + {0x0e, 0x61}, {0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24}, {0x1e, 0x04}, {0x27, 0x08}, {0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x34, 0x3d}, {0x35, 0x00}, {0x38, 0x12}, {0x0f, 0x42}, {0x39, 0x57}, @@ -1112,10 +1087,13 @@ static struct i2c_reg_u8 hv7131r_init[] = { {0x23, 0x09}, {0x01, 0x08}, }; -static int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) +static void reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) { struct usb_device *dev = gspca_dev->dev; int result; + + if (gspca_dev->usb_err < 0) + return; result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x00, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, @@ -1125,17 +1103,19 @@ static int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) length, 500); if (unlikely(result < 0 || result != length)) { - pr_err("Read register failed 0x%02X\n", reg); - return -EIO; + pr_err("Read register %02x failed %d\n", reg, result); + gspca_dev->usb_err = result; } - return 0; } -static int reg_w(struct gspca_dev *gspca_dev, u16 reg, +static void reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length) { struct usb_device *dev = gspca_dev->dev; int result; + + if (gspca_dev->usb_err < 0) + return; memcpy(gspca_dev->usb_buf, buffer, length); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0x08, @@ -1146,38 +1126,41 @@ static int reg_w(struct gspca_dev *gspca_dev, u16 reg, length, 500); if (unlikely(result < 0 || result != length)) { - pr_err("Write register failed index 0x%02X\n", reg); - return -EIO; + pr_err("Write register %02x failed %d\n", reg, result); + gspca_dev->usb_err = result; } - return 0; } -static int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value) +static void reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value) { - u8 data[1] = {value}; - return reg_w(gspca_dev, reg, data, 1); + reg_w(gspca_dev, reg, &value, 1); } -static int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer) +static void i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer) { int i; + reg_w(gspca_dev, 0x10c0, buffer, 8); for (i = 0; i < 5; i++) { reg_r(gspca_dev, 0x10c0, 1); + if (gspca_dev->usb_err < 0) + return; if (gspca_dev->usb_buf[0] & 0x04) { - if (gspca_dev->usb_buf[0] & 0x08) - return -EIO; - return 0; + if (gspca_dev->usb_buf[0] & 0x08) { + pr_err("i2c_w error\n"); + gspca_dev->usb_err = -EIO; + } + return; } - msleep(1); + msleep(10); } - return -EIO; + pr_err("i2c_w reg %02x no response\n", buffer[2]); +/* gspca_dev->usb_err = -EIO; fixme: may occur */ } -static int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) +static void i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) { struct sd *sd = (struct sd *) gspca_dev; - u8 row[8]; /* @@ -1193,10 +1176,19 @@ static int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) row[6] = 0x00; row[7] = 0x10; - return i2c_w(gspca_dev, row); + i2c_w(gspca_dev, row); +} + +static void i2c_w1_buf(struct gspca_dev *gspca_dev, + struct i2c_reg_u8 *buf, int sz) +{ + while (--sz >= 0) { + i2c_w1(gspca_dev, buf->reg, buf->val); + buf++; + } } -static int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) +static void i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) { struct sd *sd = (struct sd *) gspca_dev; u8 row[8]; @@ -1208,16 +1200,25 @@ static int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) row[0] = 0x81 | (3 << 4); row[1] = sd->i2c_addr; row[2] = reg; - row[3] = (val >> 8) & 0xff; - row[4] = val & 0xff; + row[3] = val >> 8; + row[4] = val; row[5] = 0x00; row[6] = 0x00; row[7] = 0x10; - return i2c_w(gspca_dev, row); + i2c_w(gspca_dev, row); +} + +static void i2c_w2_buf(struct gspca_dev *gspca_dev, + struct i2c_reg_u16 *buf, int sz) +{ + while (--sz >= 0) { + i2c_w2(gspca_dev, buf->reg, buf->val); + buf++; + } } -static int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) +static void i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) { struct sd *sd = (struct sd *) gspca_dev; u8 row[8]; @@ -1230,19 +1231,15 @@ static int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) row[5] = 0; row[6] = 0; row[7] = 0x10; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; + i2c_w(gspca_dev, row); row[0] = 0x81 | (1 << 4) | 0x02; row[2] = 0; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; - if (reg_r(gspca_dev, 0x10c2, 5) < 0) - return -EIO; + i2c_w(gspca_dev, row); + reg_r(gspca_dev, 0x10c2, 5); *val = gspca_dev->usb_buf[4]; - return 0; } -static int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) +static void i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) { struct sd *sd = (struct sd *) gspca_dev; u8 row[8]; @@ -1255,233 +1252,204 @@ static int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) row[5] = 0; row[6] = 0; row[7] = 0x10; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; + i2c_w(gspca_dev, row); row[0] = 0x81 | (2 << 4) | 0x02; row[2] = 0; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; - if (reg_r(gspca_dev, 0x10c2, 5) < 0) - return -EIO; + i2c_w(gspca_dev, row); + reg_r(gspca_dev, 0x10c2, 5); *val = (gspca_dev->usb_buf[3] << 8) | gspca_dev->usb_buf[4]; - return 0; } -static int ov9650_init_sensor(struct gspca_dev *gspca_dev) +static void ov9650_init_sensor(struct gspca_dev *gspca_dev) { - int i; u16 id; struct sd *sd = (struct sd *) gspca_dev; - if (i2c_r2(gspca_dev, 0x1c, &id) < 0) - return -EINVAL; + i2c_r2(gspca_dev, 0x1c, &id); + if (gspca_dev->usb_err < 0) + return; if (id != 0x7fa2) { pr_err("sensor id for ov9650 doesn't match (0x%04x)\n", id); - return -ENODEV; + gspca_dev->usb_err = -ENODEV; + return; } - for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) { - if (i2c_w1(gspca_dev, ov9650_init[i].reg, - ov9650_init[i].val) < 0) { - pr_err("OV9650 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov9650_init, ARRAY_SIZE(ov9650_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV9650 sensor initialization failed\n"); sd->hstart = 1; sd->vstart = 7; - return 0; } -static int ov9655_init_sensor(struct gspca_dev *gspca_dev) +static void ov9655_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) { - if (i2c_w1(gspca_dev, ov9655_init[i].reg, - ov9655_init[i].val) < 0) { - pr_err("OV9655 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov9655_init, ARRAY_SIZE(ov9655_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV9655 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP); sd->hstart = 1; sd->vstart = 2; - return 0; } -static int soi968_init_sensor(struct gspca_dev *gspca_dev) +static void soi968_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(soi968_init); i++) { - if (i2c_w1(gspca_dev, soi968_init[i].reg, - soi968_init[i].val) < 0) { - pr_err("SOI968 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, soi968_init, ARRAY_SIZE(soi968_init)); + if (gspca_dev->usb_err < 0) + pr_err("SOI968 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) - | (1 << EXPOSURE_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP) + | (1 << EXPOSURE); sd->hstart = 60; sd->vstart = 11; - return 0; } -static int ov7660_init_sensor(struct gspca_dev *gspca_dev) +static void ov7660_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) { - if (i2c_w1(gspca_dev, ov7660_init[i].reg, - ov7660_init[i].val) < 0) { - pr_err("OV7660 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov7660_init, ARRAY_SIZE(ov7660_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV7660 sensor initialization failed\n"); sd->hstart = 3; sd->vstart = 3; - return 0; } -static int ov7670_init_sensor(struct gspca_dev *gspca_dev) +static void ov7670_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) { - if (i2c_w1(gspca_dev, ov7670_init[i].reg, - ov7670_init[i].val) < 0) { - pr_err("OV7670 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov7670_init, ARRAY_SIZE(ov7670_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV7670 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP); sd->hstart = 0; sd->vstart = 1; - return 0; } -static int mt9v_init_sensor(struct gspca_dev *gspca_dev) +static void mt9v_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; u16 value; - int ret; sd->i2c_addr = 0x5d; - ret = i2c_r2(gspca_dev, 0xff, &value); - if ((ret == 0) && (value == 0x8243)) { - for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) { - if (i2c_w2(gspca_dev, mt9v011_init[i].reg, - mt9v011_init[i].val) < 0) { - pr_err("MT9V011 sensor initialization failed\n"); - return -ENODEV; - } + i2c_r2(gspca_dev, 0xff, &value); + if (gspca_dev->usb_err >= 0 + && value == 0x8243) { + i2c_w2_buf(gspca_dev, mt9v011_init, ARRAY_SIZE(mt9v011_init)); + if (gspca_dev->usb_err < 0) { + pr_err("MT9V011 sensor initialization failed\n"); + return; } sd->hstart = 2; sd->vstart = 2; sd->sensor = SENSOR_MT9V011; pr_info("MT9V011 sensor detected\n"); - return 0; + return; } + gspca_dev->usb_err = 0; sd->i2c_addr = 0x5c; i2c_w2(gspca_dev, 0x01, 0x0004); - ret = i2c_r2(gspca_dev, 0xff, &value); - if ((ret == 0) && (value == 0x823a)) { - for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) { - if (i2c_w2(gspca_dev, mt9v111_init[i].reg, - mt9v111_init[i].val) < 0) { - pr_err("MT9V111 sensor initialization failed\n"); - return -ENODEV; - } + i2c_r2(gspca_dev, 0xff, &value); + if (gspca_dev->usb_err >= 0 + && value == 0x823a) { + i2c_w2_buf(gspca_dev, mt9v111_init, ARRAY_SIZE(mt9v111_init)); + if (gspca_dev->usb_err < 0) { + pr_err("MT9V111 sensor initialization failed\n"); + return; } - gspca_dev->ctrl_dis = (1 << EXPOSURE_IDX) - | (1 << AUTOGAIN_IDX) - | (1 << GAIN_IDX); + gspca_dev->ctrl_dis = (1 << EXPOSURE) + | (1 << AUTOGAIN) + | (1 << GAIN); sd->hstart = 2; sd->vstart = 2; sd->sensor = SENSOR_MT9V111; pr_info("MT9V111 sensor detected\n"); - return 0; + return; } + gspca_dev->usb_err = 0; sd->i2c_addr = 0x5d; - ret = i2c_w2(gspca_dev, 0xf0, 0x0000); - if (ret < 0) { + i2c_w2(gspca_dev, 0xf0, 0x0000); + if (gspca_dev->usb_err < 0) { + gspca_dev->usb_err = 0; sd->i2c_addr = 0x48; i2c_w2(gspca_dev, 0xf0, 0x0000); } - ret = i2c_r2(gspca_dev, 0x00, &value); - if ((ret == 0) && (value == 0x1229)) { - for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) { - if (i2c_w2(gspca_dev, mt9v112_init[i].reg, - mt9v112_init[i].val) < 0) { - pr_err("MT9V112 sensor initialization failed\n"); - return -ENODEV; - } + i2c_r2(gspca_dev, 0x00, &value); + if (gspca_dev->usb_err >= 0 + && value == 0x1229) { + i2c_w2_buf(gspca_dev, mt9v112_init, ARRAY_SIZE(mt9v112_init)); + if (gspca_dev->usb_err < 0) { + pr_err("MT9V112 sensor initialization failed\n"); + return; } sd->hstart = 6; sd->vstart = 2; sd->sensor = SENSOR_MT9V112; pr_info("MT9V112 sensor detected\n"); - return 0; + return; } - return -ENODEV; + gspca_dev->usb_err = -ENODEV; } -static int mt9m112_init_sensor(struct gspca_dev *gspca_dev) +static void mt9m112_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; - for (i = 0; i < ARRAY_SIZE(mt9m112_init); i++) { - if (i2c_w2(gspca_dev, mt9m112_init[i].reg, - mt9m112_init[i].val) < 0) { - pr_err("MT9M112 sensor initialization failed\n"); - return -ENODEV; - } - } - gspca_dev->ctrl_dis = (1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX) - | (1 << GAIN_IDX); + + i2c_w2_buf(gspca_dev, mt9m112_init, ARRAY_SIZE(mt9m112_init)); + if (gspca_dev->usb_err < 0) + pr_err("MT9M112 sensor initialization failed\n"); + + gspca_dev->ctrl_dis = (1 << EXPOSURE) | (1 << AUTOGAIN) + | (1 << GAIN); sd->hstart = 0; sd->vstart = 2; - return 0; } -static int mt9m111_init_sensor(struct gspca_dev *gspca_dev) +static void mt9m111_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; - for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) { - if (i2c_w2(gspca_dev, mt9m111_init[i].reg, - mt9m111_init[i].val) < 0) { - pr_err("MT9M111 sensor initialization failed\n"); - return -ENODEV; - } - } - gspca_dev->ctrl_dis = (1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX) - | (1 << GAIN_IDX); + + i2c_w2_buf(gspca_dev, mt9m111_init, ARRAY_SIZE(mt9m111_init)); + if (gspca_dev->usb_err < 0) + pr_err("MT9M111 sensor initialization failed\n"); + + gspca_dev->ctrl_dis = (1 << EXPOSURE) | (1 << AUTOGAIN) + | (1 << GAIN); sd->hstart = 0; sd->vstart = 2; - return 0; } -static int mt9m001_init_sensor(struct gspca_dev *gspca_dev) +static void mt9m001_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; u16 id; - if (i2c_r2(gspca_dev, 0x00, &id) < 0) - return -EINVAL; + i2c_r2(gspca_dev, 0x00, &id); + if (gspca_dev->usb_err < 0) + return; /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ switch (id) { @@ -1494,85 +1462,78 @@ static int mt9m001_init_sensor(struct gspca_dev *gspca_dev) break; default: pr_err("No MT9M001 chip detected, ID = %x\n\n", id); - return -ENODEV; + gspca_dev->usb_err = -ENODEV; + return; } - for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) { - if (i2c_w2(gspca_dev, mt9m001_init[i].reg, - mt9m001_init[i].val) < 0) { - pr_err("MT9M001 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w2_buf(gspca_dev, mt9m001_init, ARRAY_SIZE(mt9m001_init)); + if (gspca_dev->usb_err < 0) + pr_err("MT9M001 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP); sd->hstart = 1; sd->vstart = 1; - return 0; } -static int hv7131r_init_sensor(struct gspca_dev *gspca_dev) +static void hv7131r_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) { - if (i2c_w1(gspca_dev, hv7131r_init[i].reg, - hv7131r_init[i].val) < 0) { - pr_err("HV7131R Sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1_buf(gspca_dev, hv7131r_init, ARRAY_SIZE(hv7131r_init)); + if (gspca_dev->usb_err < 0) + pr_err("HV7131R Sensor initialization failed\n"); + sd->hstart = 0; sd->vstart = 1; - return 0; } -static int set_cmatrix(struct gspca_dev *gspca_dev) +static void set_cmatrix(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - s32 hue_coord, hue_index = 180 + sd->hue; + int satur; + s32 hue_coord, hue_index = 180 + sd->ctrls[HUE].val; u8 cmatrix[21]; memset(cmatrix, 0, sizeof cmatrix); - cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26; + cmatrix[2] = (sd->ctrls[CONTRAST].val * 0x25 / 0x100) + 0x26; cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25; cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25; - cmatrix[18] = sd->brightness - 0x80; + cmatrix[18] = sd->ctrls[BRIGHTNESS].val - 0x80; - hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8; + satur = sd->ctrls[SATURATION].val; + hue_coord = (hsv_red_x[hue_index] * satur) >> 8; cmatrix[6] = hue_coord; cmatrix[7] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_red_y[hue_index] * satur) >> 8; cmatrix[8] = hue_coord; cmatrix[9] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_green_x[hue_index] * satur) >> 8; cmatrix[10] = hue_coord; cmatrix[11] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_green_y[hue_index] * satur) >> 8; cmatrix[12] = hue_coord; cmatrix[13] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_blue_x[hue_index] * satur) >> 8; cmatrix[14] = hue_coord; cmatrix[15] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_blue_y[hue_index] * satur) >> 8; cmatrix[16] = hue_coord; cmatrix[17] = (hue_coord >> 8) & 0x0f; - return reg_w(gspca_dev, 0x10e1, cmatrix, 21); + reg_w(gspca_dev, 0x10e1, cmatrix, 21); } -static int set_gamma(struct gspca_dev *gspca_dev) +static void set_gamma(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 gamma[17]; - u8 gval = sd->gamma * 0xb8 / 0x100; - + u8 gval = sd->ctrls[GAMMA].val * 0xb8 / 0x100; gamma[0] = 0x0a; gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8); @@ -1592,29 +1553,29 @@ static int set_gamma(struct gspca_dev *gspca_dev) gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8); gamma[16] = 0xf5; - return reg_w(gspca_dev, 0x1190, gamma, 17); + reg_w(gspca_dev, 0x1190, gamma, 17); } -static int set_redblue(struct gspca_dev *gspca_dev) +static void set_redblue(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - reg_w1(gspca_dev, 0x118c, sd->red); - reg_w1(gspca_dev, 0x118f, sd->blue); - return 0; + + reg_w1(gspca_dev, 0x118c, sd->ctrls[RED].val); + reg_w1(gspca_dev, 0x118f, sd->ctrls[BLUE].val); } -static int set_hvflip(struct gspca_dev *gspca_dev) +static void set_hvflip(struct gspca_dev *gspca_dev) { u8 value, tslb, hflip, vflip; u16 value2; struct sd *sd = (struct sd *) gspca_dev; if ((sd->flags & FLIP_DETECT) && dmi_check_system(flip_dmi_table)) { - hflip = !sd->hflip; - vflip = !sd->vflip; + hflip = !sd->ctrls[HFLIP].val; + vflip = !sd->ctrls[VFLIP].val; } else { - hflip = sd->hflip; - vflip = sd->vflip; + hflip = sd->ctrls[HFLIP].val; + vflip = sd->ctrls[VFLIP].val; } switch (sd->sensor) { @@ -1625,8 +1586,9 @@ static int set_hvflip(struct gspca_dev *gspca_dev) if (vflip) { value |= 0x10; sd->vstart = 2; - } else + } else { sd->vstart = 3; + } reg_w1(gspca_dev, 0x1182, sd->vstart); i2c_w1(gspca_dev, 0x1e, value); break; @@ -1674,13 +1636,15 @@ static int set_hvflip(struct gspca_dev *gspca_dev) i2c_w1(gspca_dev, 0x01, value); break; } - return 0; } -static int set_exposure(struct gspca_dev *gspca_dev) +static void set_exposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e}; + int expo; + + expo = sd->ctrls[EXPOSURE].val; switch (sd->sensor) { case SENSOR_OV7660: case SENSOR_OV7670: @@ -1688,35 +1652,37 @@ static int set_exposure(struct gspca_dev *gspca_dev) case SENSOR_OV9650: exp[0] |= (3 << 4); exp[2] = 0x2d; - exp[3] = sd->exposure & 0xff; - exp[4] = sd->exposure >> 8; + exp[3] = expo; + exp[4] = expo >> 8; break; case SENSOR_MT9M001: case SENSOR_MT9V112: case SENSOR_MT9V011: exp[0] |= (3 << 4); exp[2] = 0x09; - exp[3] = sd->exposure >> 8; - exp[4] = sd->exposure & 0xff; + exp[3] = expo >> 8; + exp[4] = expo; break; case SENSOR_HV7131R: exp[0] |= (4 << 4); exp[2] = 0x25; - exp[3] = (sd->exposure >> 5) & 0xff; - exp[4] = (sd->exposure << 3) & 0xff; + exp[3] = expo >> 5; + exp[4] = expo << 3; exp[5] = 0; break; default: - return 0; + return; } i2c_w(gspca_dev, exp); - return 0; } -static int set_gain(struct gspca_dev *gspca_dev) +static void set_gain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d}; + int g; + + g = sd->ctrls[GAIN].val; switch (sd->sensor) { case SENSOR_OV7660: case SENSOR_OV7670: @@ -1724,238 +1690,50 @@ static int set_gain(struct gspca_dev *gspca_dev) case SENSOR_OV9655: case SENSOR_OV9650: gain[0] |= (2 << 4); - gain[3] = ov_gain[sd->gain]; + gain[3] = ov_gain[g]; break; case SENSOR_MT9V011: gain[0] |= (3 << 4); gain[2] = 0x35; - gain[3] = micron1_gain[sd->gain] >> 8; - gain[4] = micron1_gain[sd->gain] & 0xff; + gain[3] = micron1_gain[g] >> 8; + gain[4] = micron1_gain[g]; break; case SENSOR_MT9V112: gain[0] |= (3 << 4); gain[2] = 0x2f; - gain[3] = micron1_gain[sd->gain] >> 8; - gain[4] = micron1_gain[sd->gain] & 0xff; + gain[3] = micron1_gain[g] >> 8; + gain[4] = micron1_gain[g]; break; case SENSOR_MT9M001: gain[0] |= (3 << 4); gain[2] = 0x2f; - gain[3] = micron2_gain[sd->gain] >> 8; - gain[4] = micron2_gain[sd->gain] & 0xff; + gain[3] = micron2_gain[g] >> 8; + gain[4] = micron2_gain[g]; break; case SENSOR_HV7131R: gain[0] |= (2 << 4); gain[2] = 0x30; - gain[3] = hv7131r_gain[sd->gain]; + gain[3] = hv7131r_gain[g]; break; default: - return 0; + return; } i2c_w(gspca_dev, gain); - return 0; -} - -static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->brightness = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; -} - -static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->brightness; - return 0; -} - - -static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->contrast = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; -} - -static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->contrast; - return 0; -} - -static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->saturation = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; } -static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val) +static void set_quality(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - *val = sd->saturation; - return 0; -} - -static int sd_sethue(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->hue = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; -} - -static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->hue; - return 0; -} - -static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gamma = val; - if (gspca_dev->streaming) - return set_gamma(gspca_dev); - return 0; -} - -static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->gamma; - return 0; -} - -static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->red = val; - if (gspca_dev->streaming) - return set_redblue(gspca_dev); - return 0; -} - -static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->red; - return 0; -} - -static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->blue = val; - if (gspca_dev->streaming) - return set_redblue(gspca_dev); - return 0; -} - -static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->blue; - return 0; -} - -static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->hflip = val; - if (gspca_dev->streaming) - return set_hvflip(gspca_dev); - return 0; -} - -static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->hflip; - return 0; -} - -static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->vflip = val; - if (gspca_dev->streaming) - return set_hvflip(gspca_dev); - return 0; -} - -static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->vflip; - return 0; -} - -static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->exposure = val; - if (gspca_dev->streaming) - return set_exposure(gspca_dev); - return 0; -} - -static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->exposure; - return 0; -} - -static int sd_setgain(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gain = val; - if (gspca_dev->streaming) - return set_gain(gspca_dev); - return 0; -} - -static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->gain; - return 0; -} - -static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - sd->auto_exposure = val; - return 0; -} -static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->auto_exposure; - return 0; + jpeg_set_qual(sd->jpeg_hdr, sd->ctrls[QUALITY].val); + reg_w1(gspca_dev, 0x1061, 0x01); /* stop transfer */ + reg_w1(gspca_dev, 0x10e0, sd->fmt | 0x20); /* write QTAB */ + reg_w(gspca_dev, 0x1100, &sd->jpeg_hdr[JPEG_QT0_OFFSET], 64); + reg_w(gspca_dev, 0x1140, &sd->jpeg_hdr[JPEG_QT1_OFFSET], 64); + reg_w1(gspca_dev, 0x1061, 0x03); /* restart transfer */ + reg_w1(gspca_dev, 0x10e0, sd->fmt); + sd->fmt ^= 0x0c; /* invert QTAB use + write */ + reg_w1(gspca_dev, 0x10e0, sd->fmt); } #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -1963,28 +1741,26 @@ static int sd_dbg_g_register(struct gspca_dev *gspca_dev, struct v4l2_dbg_register *reg) { struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { case V4L2_CHIP_MATCH_HOST: if (reg->match.addr != 0) return -EINVAL; if (reg->reg < 0x1000 || reg->reg > 0x11ff) return -EINVAL; - if (reg_r(gspca_dev, reg->reg, 1) < 0) - return -EINVAL; + reg_r(gspca_dev, reg->reg, 1); reg->val = gspca_dev->usb_buf[0]; - return 0; + return gspca_dev->usb_err; case V4L2_CHIP_MATCH_I2C_ADDR: if (reg->match.addr != sd->i2c_addr) return -EINVAL; if (sd->sensor >= SENSOR_MT9V011 && sd->sensor <= SENSOR_MT9M112) { - if (i2c_r2(gspca_dev, reg->reg, (u16 *)®->val) < 0) - return -EINVAL; + i2c_r2(gspca_dev, reg->reg, (u16 *) ®->val); } else { - if (i2c_r1(gspca_dev, reg->reg, (u8 *)®->val) < 0) - return -EINVAL; + i2c_r1(gspca_dev, reg->reg, (u8 *) ®->val); } - return 0; + return gspca_dev->usb_err; } return -EINVAL; } @@ -1993,27 +1769,25 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, struct v4l2_dbg_register *reg) { struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { case V4L2_CHIP_MATCH_HOST: if (reg->match.addr != 0) return -EINVAL; if (reg->reg < 0x1000 || reg->reg > 0x11ff) return -EINVAL; - if (reg_w1(gspca_dev, reg->reg, reg->val) < 0) - return -EINVAL; - return 0; + reg_w1(gspca_dev, reg->reg, reg->val); + return gspca_dev->usb_err; case V4L2_CHIP_MATCH_I2C_ADDR: if (reg->match.addr != sd->i2c_addr) return -EINVAL; if (sd->sensor >= SENSOR_MT9V011 && sd->sensor <= SENSOR_MT9M112) { - if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0) - return -EINVAL; + i2c_w2(gspca_dev, reg->reg, reg->val); } else { - if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0) - return -EINVAL; + i2c_w1(gspca_dev, reg->reg, reg->val); } - return 0; + return gspca_dev->usb_err; } return -EINVAL; } @@ -2050,9 +1824,9 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; cam->needs_full_bandwidth = 1; - sd->sensor = (id->driver_info >> 8) & 0xff; - sd->i2c_addr = id->driver_info & 0xff; - sd->flags = (id->driver_info >> 16) & 0xff; + sd->sensor = id->driver_info >> 8; + sd->i2c_addr = id->driver_info; + sd->flags = id->driver_info >> 16; switch (sd->sensor) { case SENSOR_MT9M112: @@ -2076,21 +1850,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->older_step = 0; sd->exposure_step = 16; - sd->brightness = BRIGHTNESS_DEFAULT; - sd->contrast = CONTRAST_DEFAULT; - sd->saturation = SATURATION_DEFAULT; - sd->hue = HUE_DEFAULT; - sd->gamma = GAMMA_DEFAULT; - sd->red = RED_DEFAULT; - sd->blue = BLUE_DEFAULT; + gspca_dev->cam.ctrls = sd->ctrls; - sd->hflip = HFLIP_DEFAULT; - sd->vflip = VFLIP_DEFAULT; - sd->exposure = EXPOSURE_DEFAULT; - sd->gain = GAIN_DEFAULT; - sd->auto_exposure = AUTO_EXPOSURE_DEFAULT; - - sd->quality = 95; + INIT_WORK(&sd->work, qual_upd); return 0; } @@ -2105,9 +1867,10 @@ static int sd_init(struct gspca_dev *gspca_dev) for (i = 0; i < ARRAY_SIZE(bridge_init); i++) { value = bridge_init[i][1]; - if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) { + reg_w(gspca_dev, bridge_init[i][0], &value, 1); + if (gspca_dev->usb_err < 0) { pr_err("Device initialization failed\n"); - return -ENODEV; + return gspca_dev->usb_err; } } @@ -2116,72 +1879,85 @@ static int sd_init(struct gspca_dev *gspca_dev) else reg_w1(gspca_dev, 0x1006, 0x20); - if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) { + reg_w(gspca_dev, 0x10c0, i2c_init, 9); + if (gspca_dev->usb_err < 0) { pr_err("Device initialization failed\n"); - return -ENODEV; + return gspca_dev->usb_err; } switch (sd->sensor) { case SENSOR_OV9650: - if (ov9650_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov9650_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV9650 sensor detected\n"); break; case SENSOR_OV9655: - if (ov9655_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov9655_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV9655 sensor detected\n"); break; case SENSOR_SOI968: - if (soi968_init_sensor(gspca_dev) < 0) - return -ENODEV; + soi968_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("SOI968 sensor detected\n"); break; case SENSOR_OV7660: - if (ov7660_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov7660_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV7660 sensor detected\n"); break; case SENSOR_OV7670: - if (ov7670_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov7670_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV7670 sensor detected\n"); break; case SENSOR_MT9VPRB: - if (mt9v_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9v_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; + pr_info("MT9VPRB sensor detected\n"); break; case SENSOR_MT9M111: - if (mt9m111_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9m111_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("MT9M111 sensor detected\n"); break; case SENSOR_MT9M112: - if (mt9m112_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9m112_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("MT9M112 sensor detected\n"); break; case SENSOR_MT9M001: - if (mt9m001_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9m001_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; break; case SENSOR_HV7131R: - if (hv7131r_init_sensor(gspca_dev) < 0) - return -ENODEV; + hv7131r_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("HV7131R sensor detected\n"); break; default: - pr_info("Unsupported Sensor\n"); - return -ENODEV; + pr_err("Unsupported sensor\n"); + gspca_dev->usb_err = -ENODEV; } - return 0; + return gspca_dev->usb_err; } static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode) { struct sd *sd = (struct sd *) gspca_dev; u8 value; + switch (sd->sensor) { case SENSOR_SOI968: if (mode & MODE_SXGA) { @@ -2264,6 +2040,7 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev) break; default: /* >= 640x480 */ gspca_dev->alt = 9; + break; } } @@ -2290,14 +2067,15 @@ static int sd_start(struct gspca_dev *gspca_dev) jpeg_define(sd->jpeg_hdr, height, width, 0x21); - jpeg_set_qual(sd->jpeg_hdr, sd->quality); + jpeg_set_qual(sd->jpeg_hdr, sd->ctrls[QUALITY].val); if (mode & MODE_RAW) fmt = 0x2d; else if (mode & MODE_JPEG) - fmt = 0x2c; + fmt = 0x24; else fmt = 0x2f; /* YUV 420 */ + sd->fmt = fmt; switch (mode & SCALE_MASK) { case SCALE_1280x1024: @@ -2334,18 +2112,37 @@ static int sd_start(struct gspca_dev *gspca_dev) set_hvflip(gspca_dev); reg_w1(gspca_dev, 0x1007, 0x20); + reg_w1(gspca_dev, 0x1061, 0x03); + + /* if JPEG, prepare the compression quality update */ + if (mode & MODE_JPEG) { + sd->pktsz = sd->npkt = 0; + sd->nchg = 0; + sd->work_thread = + create_singlethread_workqueue(KBUILD_MODNAME); + } - reg_r(gspca_dev, 0x1061, 1); - reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02); - return 0; + return gspca_dev->usb_err; } static void sd_stopN(struct gspca_dev *gspca_dev) { reg_w1(gspca_dev, 0x1007, 0x00); + reg_w1(gspca_dev, 0x1061, 0x01); +} + +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; - reg_r(gspca_dev, 0x1061, 1); - reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02); + if (sd->work_thread != NULL) { + mutex_unlock(&gspca_dev->usb_lock); + destroy_workqueue(sd->work_thread); + mutex_lock(&gspca_dev->usb_lock); + sd->work_thread = NULL; + } } static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum) @@ -2359,15 +2156,15 @@ static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum) * and exposure steps */ if (avg_lum < MIN_AVG_LUM) { - if (sd->exposure > 0x1770) + if (sd->ctrls[EXPOSURE].val > 0x1770) return; - new_exp = sd->exposure + sd->exposure_step; + new_exp = sd->ctrls[EXPOSURE].val + sd->exposure_step; if (new_exp > 0x1770) new_exp = 0x1770; if (new_exp < 0x10) new_exp = 0x10; - sd->exposure = new_exp; + sd->ctrls[EXPOSURE].val = new_exp; set_exposure(gspca_dev); sd->older_step = sd->old_step; @@ -2379,14 +2176,14 @@ static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum) sd->exposure_step += 2; } if (avg_lum > MAX_AVG_LUM) { - if (sd->exposure < 0x10) + if (sd->ctrls[EXPOSURE].val < 0x10) return; - new_exp = sd->exposure - sd->exposure_step; + new_exp = sd->ctrls[EXPOSURE].val - sd->exposure_step; if (new_exp > 0x1700) new_exp = 0x1770; if (new_exp < 0x10) new_exp = 0x10; - sd->exposure = new_exp; + sd->ctrls[EXPOSURE].val = new_exp; set_exposure(gspca_dev); sd->older_step = sd->old_step; sd->old_step = 0; @@ -2403,14 +2200,14 @@ static void do_autogain(struct gspca_dev *gspca_dev, u16 avg_lum) struct sd *sd = (struct sd *) gspca_dev; if (avg_lum < MIN_AVG_LUM) { - if (sd->gain + 1 <= 28) { - sd->gain++; + if (sd->ctrls[GAIN].val + 1 <= 28) { + sd->ctrls[GAIN].val++; set_gain(gspca_dev); } } if (avg_lum > MAX_AVG_LUM) { - if (sd->gain > 0) { - sd->gain--; + if (sd->ctrls[GAIN].val > 0) { + sd->ctrls[GAIN].val--; set_gain(gspca_dev); } } @@ -2421,7 +2218,7 @@ static void sd_dqcallback(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int avg_lum; - if (!sd->auto_exposure) + if (!sd->ctrls[AUTOGAIN].val) return; avg_lum = atomic_read(&sd->avg_lum); @@ -2431,33 +2228,92 @@ static void sd_dqcallback(struct gspca_dev *gspca_dev) do_autoexposure(gspca_dev, avg_lum); } +/* JPEG quality update */ +/* This function is executed from a work queue. */ +static void qual_upd(struct work_struct *work) +{ + struct sd *sd = container_of(work, struct sd, work); + struct gspca_dev *gspca_dev = &sd->gspca_dev; + + mutex_lock(&gspca_dev->usb_lock); + PDEBUG(D_STREAM, "qual_upd %d%%", sd->ctrls[QUALITY].val); + set_quality(gspca_dev); + mutex_unlock(&gspca_dev->usb_lock); +} + #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet */ int len) /* interrupt packet length */ { struct sd *sd = (struct sd *) gspca_dev; - int ret = -EINVAL; + if (!(sd->flags & HAS_NO_BUTTON) && len == 1) { - input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); - input_sync(gspca_dev->input_dev); - input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); - input_sync(gspca_dev->input_dev); - ret = 0; + input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); + input_sync(gspca_dev->input_dev); + input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); + input_sync(gspca_dev->input_dev); + return 0; } - return ret; + return -EINVAL; } #endif +/* check the JPEG compression */ +static void transfer_check(struct gspca_dev *gspca_dev, + u8 *data) +{ + struct sd *sd = (struct sd *) gspca_dev; + int new_qual, r; + + new_qual = 0; + + /* if USB error, discard the frame and decrease the quality */ + if (data[6] & 0x08) { /* USB FIFO full */ + gspca_dev->last_packet_type = DISCARD_PACKET; + new_qual = -5; + } else { + + /* else, compute the filling rate and a new JPEG quality */ + r = (sd->pktsz * 100) / + (sd->npkt * + gspca_dev->urb[0]->iso_frame_desc[0].length); + if (r >= 85) + new_qual = -3; + else if (r < 75) + new_qual = 2; + } + if (new_qual != 0) { + sd->nchg += new_qual; + if (sd->nchg < -6 || sd->nchg >= 12) { + sd->nchg = 0; + new_qual += sd->ctrls[QUALITY].val; + if (new_qual < QUALITY_MIN) + new_qual = QUALITY_MIN; + else if (new_qual > QUALITY_MAX) + new_qual = QUALITY_MAX; + if (new_qual != sd->ctrls[QUALITY].val) { + sd->ctrls[QUALITY].val = new_qual; + queue_work(sd->work_thread, &sd->work); + } + } + } else { + sd->nchg = 0; + } + sd->pktsz = sd->npkt = 0; +} + static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; - int avg_lum; + int avg_lum, is_jpeg; static u8 frame_header[] = {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96}; - if (len == 64 && memcmp(data, frame_header, 6) == 0) { + + is_jpeg = (sd->fmt & 0x03) == 0; + if (len >= 64 && memcmp(data, frame_header, 6) == 0) { avg_lum = ((data[35] >> 2) & 3) | (data[20] << 2) | (data[19] << 10); @@ -2484,12 +2340,18 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, (data[33] << 10); avg_lum >>= 9; atomic_set(&sd->avg_lum, avg_lum); + + if (is_jpeg) + transfer_check(gspca_dev, data); + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); - return; + len -= 64; + if (len == 0) + return; + data += 64; } if (gspca_dev->last_packet_type == LAST_PACKET) { - if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv - & MODE_JPEG) { + if (is_jpeg) { gspca_frame_add(gspca_dev, FIRST_PACKET, sd->jpeg_hdr, JPEG_HDR_SZ); gspca_frame_add(gspca_dev, INTER_PACKET, @@ -2499,13 +2361,18 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data, len); } } else { + /* if JPEG, count the packets and their size */ + if (is_jpeg) { + sd->npkt++; + sd->pktsz += len; + } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } } /* sub-driver description */ static const struct sd_desc sd_desc = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, @@ -2513,6 +2380,7 @@ static const struct sd_desc sd_desc = { .isoc_init = sd_isoc_init, .start = sd_start, .stopN = sd_stopN, + .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) .int_pkt_scan = sd_int_pkt_scan, @@ -2581,7 +2449,7 @@ static int sd_probe(struct usb_interface *intf, } static struct usb_driver sd_driver = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 0c9e6ddabd2c..db8e5084df06 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -39,7 +39,9 @@ enum e_ctrl { BLUE, RED, GAMMA, + EXPOSURE, AUTOGAIN, + GAIN, HFLIP, VFLIP, SHARPNESS, @@ -131,7 +133,9 @@ static void setcontrast(struct gspca_dev *gspca_dev); static void setcolors(struct gspca_dev *gspca_dev); static void setredblue(struct gspca_dev *gspca_dev); static void setgamma(struct gspca_dev *gspca_dev); -static void setautogain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); +static void setgain(struct gspca_dev *gspca_dev); static void sethvflip(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); static void setillum(struct gspca_dev *gspca_dev); @@ -213,6 +217,18 @@ static const struct ctrl sd_ctrls[NCTRLS] = { }, .set_control = setgamma }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 500, + .maximum = 1500, + .step = 1, + .default_value = 1024 + }, + .set_control = setexposure + }, [AUTOGAIN] = { { .id = V4L2_CID_AUTOGAIN, @@ -223,7 +239,19 @@ static const struct ctrl sd_ctrls[NCTRLS] = { .step = 1, .default_value = 1 }, - .set_control = setautogain + .set = sd_setautogain, + }, +[GAIN] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 4, + .maximum = 49, + .step = 1, + .default_value = 15 + }, + .set_control = setgain }, [HFLIP] = { { @@ -290,60 +318,87 @@ static const struct ctrl sd_ctrls[NCTRLS] = { /* table of the disabled controls */ static const __u32 ctrl_dis[] = { -[SENSOR_ADCM1700] = (1 << AUTOGAIN) | +[SENSOR_ADCM1700] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_GC0307] = (1 << HFLIP) | +[SENSOR_GC0307] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_HV7131R] = (1 << HFLIP) | +[SENSOR_HV7131R] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << FREQ), -[SENSOR_MI0360] = (1 << HFLIP) | +[SENSOR_MI0360] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MI0360B] = (1 << HFLIP) | +[SENSOR_MI0360B] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MO4000] = (1 << HFLIP) | +[SENSOR_MO4000] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MT9V111] = (1 << HFLIP) | +[SENSOR_MT9V111] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_OM6802] = (1 << HFLIP) | +[SENSOR_OM6802] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_OV7630] = (1 << HFLIP), +[SENSOR_OV7630] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP), -[SENSOR_OV7648] = (1 << HFLIP), +[SENSOR_OV7648] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP), -[SENSOR_OV7660] = (1 << AUTOGAIN) | +[SENSOR_OV7660] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP), -[SENSOR_PO1030] = (1 << AUTOGAIN) | +[SENSOR_PO1030] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_PO2030N] = (1 << AUTOGAIN) | - (1 << FREQ), +[SENSOR_PO2030N] = (1 << FREQ), -[SENSOR_SOI768] = (1 << AUTOGAIN) | +[SENSOR_SOI768] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_SP80708] = (1 << AUTOGAIN) | +[SENSOR_SP80708] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), @@ -1242,14 +1297,6 @@ static const u8 po2030n_sensor_param1[][8] = { {0xa1, 0x6e, 0x05, 0x6f, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x6e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x6e, 0x07, 0x25, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x6e, 0x15, 0x04, 0x00, 0x00, 0x00, 0x10}, - {0xc1, 0x6e, 0x16, 0x52, 0x40, 0x48, 0x00, 0x10}, -/*after start*/ - {0xa1, 0x6e, 0x15, 0x0f, 0x00, 0x00, 0x00, 0x10}, - {DELAY, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */ - {0xa1, 0x6e, 0x1a, 0x05, 0x00, 0x00, 0x00, 0x10}, - {DELAY, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */ - {0xa1, 0x6e, 0x1b, 0x53, 0x00, 0x00, 0x00, 0x10}, {} }; @@ -1858,7 +1905,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return gspca_dev->usb_err; } -static u32 setexposure(struct gspca_dev *gspca_dev, +static u32 expo_adjust(struct gspca_dev *gspca_dev, u32 expo) { struct sd *sd = (struct sd *) gspca_dev; @@ -1982,28 +2029,28 @@ static void setbrightness(struct gspca_dev *gspca_dev) expo = 0x002dc6c0; else if (expo < 0x02a0) expo = 0x02a0; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); break; case SENSOR_MI0360: case SENSOR_MO4000: expo = brightness << 4; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); break; case SENSOR_MI0360B: expo = brightness << 2; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); break; case SENSOR_GC0307: expo = brightness; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); return; /* don't set the Y offset */ case SENSOR_MT9V111: expo = brightness << 2; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); return; /* don't set the Y offset */ case SENSOR_OM6802: expo = brightness << 2; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); return; /* Y offset already set */ } @@ -2112,6 +2159,23 @@ static void setgamma(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x20, gamma, sizeof gamma); } +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_PO2030N) { + u8 rexpo[] = /* 1a: expo H, 1b: expo M */ + {0xa1, 0x6e, 0x1a, 0x00, 0x40, 0x00, 0x00, 0x10}; + + rexpo[3] = sd->ctrls[EXPOSURE].val >> 8; + i2c_w8(gspca_dev, rexpo); + msleep(6); + rexpo[2] = 0x1b; + rexpo[3] = sd->ctrls[EXPOSURE].val; + i2c_w8(gspca_dev, rexpo); + } +} + static void setautogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2139,6 +2203,19 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->ag_cnt = -1; } +static void setgain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_PO2030N) { + u8 rgain[] = /* 15: gain */ + {0xa1, 0x6e, 0x15, 0x00, 0x40, 0x00, 0x00, 0x15}; + + rgain[3] = sd->ctrls[GAIN].val; + i2c_w8(gspca_dev, rgain); + } +} + static void sethvflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2623,6 +2700,10 @@ static int sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setcolors(gspca_dev); setautogain(gspca_dev); + if (!(gspca_dev->ctrl_inac & ((1 << EXPOSURE) | (1 << GAIN)))) { + setexposure(gspca_dev); + setgain(gspca_dev); + } setfreq(gspca_dev); sd->pktsz = sd->npkt = 0; @@ -2719,6 +2800,12 @@ static void sd_stop0(struct gspca_dev *gspca_dev) } } +/* !! coarse_grained_expo_autogain is not used !! */ +#define exp_too_low_cnt bridge +#define exp_too_high_cnt sensor + +#include "autogain_functions.h" + static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2736,6 +2823,13 @@ static void do_autogain(struct gspca_dev *gspca_dev) delta = atomic_read(&sd->avg_lum); PDEBUG(D_FRAM, "mean lum %d", delta); + + if (sd->sensor == SENSOR_PO2030N) { + auto_gain_n_exposure(gspca_dev, delta, luma_mean, luma_delta, + 15, 1024); + return; + } + if (delta < luma_mean - luma_delta || delta > luma_mean + luma_delta) { switch (sd->sensor) { @@ -2744,7 +2838,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) expotimes); break; case SENSOR_HV7131R: @@ -2752,7 +2846,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 4; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) (expotimes << 8)); break; case SENSOR_OM6802: @@ -2761,7 +2855,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 2; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) expotimes); setredblue(gspca_dev); break; @@ -2773,7 +2867,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) expotimes); setredblue(gspca_dev); break; @@ -2948,16 +3042,18 @@ marker_found: } } -static int sd_get_jcomp(struct gspca_dev *gspca_dev, - struct v4l2_jpegcompression *jcomp) +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - memset(jcomp, 0, sizeof *jcomp); - jcomp->quality = sd->quality; - jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT - | V4L2_JPEG_MARKER_DQT; - return 0; + sd->ctrls[AUTOGAIN].val = val; + if (val) + gspca_dev->ctrl_inac |= (1 << EXPOSURE) | (1 << GAIN); + else + gspca_dev->ctrl_inac &= ~(1 << EXPOSURE) & ~(1 << GAIN); + if (gspca_dev->streaming) + setautogain(gspca_dev); + return gspca_dev->usb_err; } static int sd_querymenu(struct gspca_dev *gspca_dev, @@ -3012,7 +3108,6 @@ static const struct sd_desc sd_desc = { .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, - .get_jcomp = sd_get_jcomp, .querymenu = sd_querymenu, #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) .int_pkt_scan = sd_int_pkt_scan, diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile index 5b318faf9aa8..38bc41061d83 100644 --- a/drivers/media/video/gspca/stv06xx/Makefile +++ b/drivers/media/video/gspca/stv06xx/Makefile @@ -6,5 +6,5 @@ gspca_stv06xx-objs := stv06xx.o \ stv06xx_pb0100.o \ stv06xx_st6422.o -ccflags-y += -Idrivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/video/gspca diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index b9e15bb0328b..7d9a4f1be9dc 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -1,7 +1,7 @@ /* - * Z-Star/Vimicro zc301/zc302p/vc30x library + * Z-Star/Vimicro zc301/zc302p/vc30x driver * - * Copyright (C) 2009-2011 Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2009-2012 Jean-Francois Moine <http://moinejf.free.fr> * Copyright (C) 2004 2005 2006 Michel Xhaard mxhaard@magic.fr * * This program is free software; you can redistribute it and/or modify @@ -21,8 +21,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#define MODULE_NAME "zc3xx" - #include <linux/input.h> #include "gspca.h" #include "jpeg.h" @@ -34,7 +32,7 @@ MODULE_LICENSE("GPL"); static int force_sensor = -1; -#define QUANT_VAL 1 /* quantization table */ +#define REG08_DEF 3 /* default JPEG compression (70%) */ #include "zc3xx-reg.h" /* controls */ @@ -46,6 +44,7 @@ enum e_ctrl { AUTOGAIN, LIGHTFREQ, SHARPNESS, + QUALITY, NCTRLS /* number of controls */ }; @@ -57,10 +56,10 @@ struct sd { struct gspca_ctrl ctrls[NCTRLS]; - u8 quality; /* image quality */ -#define QUALITY_MIN 50 -#define QUALITY_MAX 80 -#define QUALITY_DEF 70 + struct work_struct work; + struct workqueue_struct *work_thread; + + u8 reg08; /* webcam compression quality */ u8 bridge; u8 sensor; /* Type of image sensor chip */ @@ -101,6 +100,7 @@ static void setexposure(struct gspca_dev *gspca_dev); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static void setlightfreq(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); +static int sd_setquality(struct gspca_dev *gspca_dev, __s32 val); static const struct ctrl sd_ctrls[NCTRLS] = { [BRIGHTNESS] = { @@ -188,6 +188,18 @@ static const struct ctrl sd_ctrls[NCTRLS] = { }, .set_control = setsharpness }, +[QUALITY] = { + { + .id = V4L2_CID_JPEG_COMPRESSION_QUALITY, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Compression Quality", + .minimum = 40, + .maximum = 70, + .step = 1, + .default_value = 70 /* updated in sd_init() */ + }, + .set = sd_setquality + }, }; static const struct v4l2_pix_format vga_mode[] = { @@ -229,6 +241,9 @@ static const struct v4l2_pix_format sif_mode[] = { .priv = 0}, }; +/* bridge reg08 -> JPEG quality conversion table */ +static u8 jpeg_qual[] = {40, 50, 60, 70, /*80*/}; + /* usb exchanges */ struct usb_action { u8 req; @@ -3894,7 +3909,6 @@ static const struct usb_action pas106b_Initial[] = { /* 352x288 */ /* Gains */ {0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF}, {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, - {0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN}, {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN}, /* Auto correction */ {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE}, @@ -5640,7 +5654,7 @@ static const struct usb_action gc0303_NoFlikerScale[] = { {} }; -static u8 reg_r_i(struct gspca_dev *gspca_dev, +static u8 reg_r(struct gspca_dev *gspca_dev, u16 index) { int ret; @@ -5655,24 +5669,14 @@ static u8 reg_r_i(struct gspca_dev *gspca_dev, index, gspca_dev->usb_buf, 1, 500); if (ret < 0) { - pr_err("reg_r_i err %d\n", ret); + pr_err("reg_r err %d\n", ret); gspca_dev->usb_err = ret; return 0; } return gspca_dev->usb_buf[0]; } -static u8 reg_r(struct gspca_dev *gspca_dev, - u16 index) -{ - u8 ret; - - ret = reg_r_i(gspca_dev, index); - PDEBUG(D_USBI, "reg r [%04x] -> %02x", index, ret); - return ret; -} - -static void reg_w_i(struct gspca_dev *gspca_dev, +static void reg_w(struct gspca_dev *gspca_dev, u8 value, u16 index) { @@ -5692,14 +5696,6 @@ static void reg_w_i(struct gspca_dev *gspca_dev, } } -static void reg_w(struct gspca_dev *gspca_dev, - u8 value, - u16 index) -{ - PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value); - reg_w_i(gspca_dev, value, index); -} - static u16 i2c_read(struct gspca_dev *gspca_dev, u8 reg) { @@ -5708,16 +5704,14 @@ static u16 i2c_read(struct gspca_dev *gspca_dev, if (gspca_dev->usb_err < 0) return 0; - reg_w_i(gspca_dev, reg, 0x0092); - reg_w_i(gspca_dev, 0x02, 0x0090); /* <- read command */ + reg_w(gspca_dev, reg, 0x0092); + reg_w(gspca_dev, 0x02, 0x0090); /* <- read command */ msleep(20); - retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */ + retbyte = reg_r(gspca_dev, 0x0091); /* read status */ if (retbyte != 0x00) pr_err("i2c_r status error %02x\n", retbyte); - retval = reg_r_i(gspca_dev, 0x0095); /* read Lowbyte */ - retval |= reg_r_i(gspca_dev, 0x0096) << 8; /* read Hightbyte */ - PDEBUG(D_USBI, "i2c r [%02x] -> %04x (%02x)", - reg, retval, retbyte); + retval = reg_r(gspca_dev, 0x0095); /* read Lowbyte */ + retval |= reg_r(gspca_dev, 0x0096) << 8; /* read Hightbyte */ return retval; } @@ -5730,16 +5724,14 @@ static u8 i2c_write(struct gspca_dev *gspca_dev, if (gspca_dev->usb_err < 0) return 0; - reg_w_i(gspca_dev, reg, 0x92); - reg_w_i(gspca_dev, valL, 0x93); - reg_w_i(gspca_dev, valH, 0x94); - reg_w_i(gspca_dev, 0x01, 0x90); /* <- write command */ + reg_w(gspca_dev, reg, 0x92); + reg_w(gspca_dev, valL, 0x93); + reg_w(gspca_dev, valH, 0x94); + reg_w(gspca_dev, 0x01, 0x90); /* <- write command */ msleep(1); - retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */ + retbyte = reg_r(gspca_dev, 0x0091); /* read status */ if (retbyte != 0x00) pr_err("i2c_w status error %02x\n", retbyte); - PDEBUG(D_USBO, "i2c w [%02x] = %02x%02x (%02x)", - reg, valH, valL, retbyte); return retbyte; } @@ -5906,6 +5898,8 @@ static void getexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (sd->sensor != SENSOR_HV7131R) + return; sd->ctrls[EXPOSURE].val = (i2c_read(gspca_dev, 0x25) << 9) | (i2c_read(gspca_dev, 0x26) << 1) | (i2c_read(gspca_dev, 0x27) >> 7); @@ -5916,6 +5910,8 @@ static void setexposure(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int val; + if (sd->sensor != SENSOR_HV7131R) + return; val = sd->ctrls[EXPOSURE].val; i2c_write(gspca_dev, 0x25, val >> 9, 0x00); i2c_write(gspca_dev, 0x26, val >> 1, 0x00); @@ -5925,32 +5921,20 @@ static void setexposure(struct gspca_dev *gspca_dev) static void setquality(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - u8 frxt; + s8 reg07; + reg07 = 0; switch (sd->sensor) { - case SENSOR_ADCM2700: - case SENSOR_GC0305: - case SENSOR_HV7131B: - case SENSOR_HV7131R: case SENSOR_OV7620: + reg07 = 0x30; + break; + case SENSOR_HV7131R: case SENSOR_PAS202B: - case SENSOR_PO2030: - return; + return; /* done by work queue */ } -/*fixme: is it really 0008 0007 0018 for all other sensors? */ - reg_w(gspca_dev, QUANT_VAL, 0x0008); - frxt = 0x30; - reg_w(gspca_dev, frxt, 0x0007); -#if QUANT_VAL == 0 || QUANT_VAL == 1 || QUANT_VAL == 2 - frxt = 0xff; -#elif QUANT_VAL == 3 - frxt = 0xf0; -#elif QUANT_VAL == 4 - frxt = 0xe0; -#else - frxt = 0x20; -#endif - reg_w(gspca_dev, frxt, 0x0018); + reg_w(gspca_dev, sd->reg08, ZC3XX_R008_CLOCKSETTING); + if (reg07 != 0) + reg_w(gspca_dev, reg07, 0x0007); } /* Matches the sensor's internal frame rate to the lighting frequency. @@ -6084,6 +6068,115 @@ static void setautogain(struct gspca_dev *gspca_dev) reg_w(gspca_dev, autoval, 0x0180); } +/* update the transfer parameters */ +/* This function is executed from a work queue. */ +/* The exact use of the bridge registers 07 and 08 is not known. + * The following algorithm has been adapted from ms-win traces */ +static void transfer_update(struct work_struct *work) +{ + struct sd *sd = container_of(work, struct sd, work); + struct gspca_dev *gspca_dev = &sd->gspca_dev; + int change, good; + u8 reg07, reg11; + + /* synchronize with the main driver and initialize the registers */ + mutex_lock(&gspca_dev->usb_lock); + reg07 = 0; /* max */ + reg_w(gspca_dev, reg07, 0x0007); + reg_w(gspca_dev, sd->reg08, ZC3XX_R008_CLOCKSETTING); + mutex_unlock(&gspca_dev->usb_lock); + + good = 0; + for (;;) { + msleep(100); + + /* get the transfer status */ + /* the bit 0 of the bridge register 11 indicates overflow */ + mutex_lock(&gspca_dev->usb_lock); + if (!gspca_dev->present || !gspca_dev->streaming) + goto err; + reg11 = reg_r(gspca_dev, 0x0011); + if (gspca_dev->usb_err < 0 + || !gspca_dev->present || !gspca_dev->streaming) + goto err; + + change = reg11 & 0x01; + if (change) { /* overflow */ + switch (reg07) { + case 0: /* max */ + reg07 = sd->sensor == SENSOR_HV7131R + ? 0x30 : 0x32; + if (sd->reg08 != 0) { + change = 3; + sd->reg08--; + } + break; + case 0x32: + reg07 -= 4; + break; + default: + reg07 -= 2; + break; + case 2: + change = 0; /* already min */ + break; + } + good = 0; + } else { /* no overflow */ + if (reg07 != 0) { /* if not max */ + good++; + if (good >= 10) { + good = 0; + change = 1; + reg07 += 2; + switch (reg07) { + case 0x30: + if (sd->sensor == SENSOR_PAS202B) + reg07 += 2; + break; + case 0x32: + case 0x34: + reg07 = 0; + break; + } + } + } else { /* reg07 max */ + if (sd->reg08 < sizeof jpeg_qual - 1) { + good++; + if (good > 10) { + sd->reg08++; + change = 2; + } + } + } + } + if (change) { + if (change & 1) { + reg_w(gspca_dev, reg07, 0x0007); + if (gspca_dev->usb_err < 0 + || !gspca_dev->present + || !gspca_dev->streaming) + goto err; + } + if (change & 2) { + reg_w(gspca_dev, sd->reg08, + ZC3XX_R008_CLOCKSETTING); + if (gspca_dev->usb_err < 0 + || !gspca_dev->present + || !gspca_dev->streaming) + goto err; + sd->ctrls[QUALITY].val = jpeg_qual[sd->reg08]; + jpeg_set_qual(sd->jpeg_hdr, + jpeg_qual[sd->reg08]); + } + } + mutex_unlock(&gspca_dev->usb_lock); + } + return; +err: + mutex_unlock(&gspca_dev->usb_lock); +} + static void send_unknown(struct gspca_dev *gspca_dev, int sensor) { reg_w(gspca_dev, 0x01, 0x0000); /* bridge reset */ @@ -6411,7 +6504,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->sensor = id->driver_info; gspca_dev->cam.ctrls = sd->ctrls; - sd->quality = QUALITY_DEF; + sd->reg08 = REG08_DEF; + + INIT_WORK(&sd->work, transfer_update); return 0; } @@ -6464,6 +6559,27 @@ static int sd_init(struct gspca_dev *gspca_dev) [SENSOR_PO2030] = 1, [SENSOR_TAS5130C] = 1, }; + static const u8 reg08_tb[SENSOR_MAX] = { + [SENSOR_ADCM2700] = 1, + [SENSOR_CS2102] = 3, + [SENSOR_CS2102K] = 3, + [SENSOR_GC0303] = 2, + [SENSOR_GC0305] = 3, + [SENSOR_HDCS2020] = 1, + [SENSOR_HV7131B] = 3, + [SENSOR_HV7131R] = 3, + [SENSOR_ICM105A] = 3, + [SENSOR_MC501CB] = 3, + [SENSOR_MT9V111_1] = 3, + [SENSOR_MT9V111_3] = 3, + [SENSOR_OV7620] = 1, + [SENSOR_OV7630C] = 3, + [SENSOR_PAS106] = 3, + [SENSOR_PAS202B] = 3, + [SENSOR_PB0330] = 3, + [SENSOR_PO2030] = 2, + [SENSOR_TAS5130C] = 3, + }; sensor = zcxx_probeSensor(gspca_dev); if (sensor >= 0) @@ -6528,7 +6644,6 @@ static int sd_init(struct gspca_dev *gspca_dev) case 0x0e: PDEBUG(D_PROBE, "Find Sensor PAS202B"); sd->sensor = SENSOR_PAS202B; -/* sd->sharpness = 1; */ break; case 0x0f: PDEBUG(D_PROBE, "Find Sensor PAS106"); @@ -6616,13 +6731,21 @@ static int sd_init(struct gspca_dev *gspca_dev) } sd->ctrls[GAMMA].def = gamma[sd->sensor]; + sd->reg08 = reg08_tb[sd->sensor]; + sd->ctrls[QUALITY].def = jpeg_qual[sd->reg08]; + sd->ctrls[QUALITY].min = jpeg_qual[0]; + sd->ctrls[QUALITY].max = jpeg_qual[ARRAY_SIZE(jpeg_qual) - 1]; switch (sd->sensor) { case SENSOR_HV7131R: + gspca_dev->ctrl_dis = (1 << QUALITY); break; case SENSOR_OV7630C: gspca_dev->ctrl_dis = (1 << LIGHTFREQ) | (1 << EXPOSURE); break; + case SENSOR_PAS202B: + gspca_dev->ctrl_dis = (1 << QUALITY) | (1 << EXPOSURE); + break; default: gspca_dev->ctrl_dis = (1 << EXPOSURE); break; @@ -6685,7 +6808,6 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ - jpeg_set_qual(sd->jpeg_hdr, sd->quality); mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; switch (sd->sensor) { @@ -6761,10 +6883,9 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_r(gspca_dev, 0x0180); /* from win */ reg_w(gspca_dev, 0x00, 0x0180); break; - default: - setquality(gspca_dev); - break; } + setquality(gspca_dev); + jpeg_set_qual(sd->jpeg_hdr, jpeg_qual[sd->reg08]); setlightfreq(gspca_dev); switch (sd->sensor) { @@ -6776,8 +6897,7 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x40, 0x0117); break; case SENSOR_HV7131R: - if (!sd->ctrls[AUTOGAIN].val) - setexposure(gspca_dev); + setexposure(gspca_dev); reg_w(gspca_dev, 0x00, ZC3XX_R1A7_CALCGLOBALMEAN); break; case SENSOR_GC0305: @@ -6802,13 +6922,19 @@ static int sd_start(struct gspca_dev *gspca_dev) } setautogain(gspca_dev); - switch (sd->sensor) { - case SENSOR_PO2030: - msleep(50); - reg_w(gspca_dev, 0x00, 0x0007); /* (from win traces) */ - reg_w(gspca_dev, 0x02, ZC3XX_R008_CLOCKSETTING); - break; + + /* start the transfer update thread if needed */ + if (gspca_dev->usb_err >= 0) { + switch (sd->sensor) { + case SENSOR_HV7131R: + case SENSOR_PAS202B: + sd->work_thread = + create_singlethread_workqueue(KBUILD_MODNAME); + queue_work(sd->work_thread, &sd->work); + break; + } } + return gspca_dev->usb_err; } @@ -6817,6 +6943,12 @@ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (sd->work_thread != NULL) { + mutex_unlock(&gspca_dev->usb_lock); + destroy_workqueue(sd->work_thread); + mutex_lock(&gspca_dev->usb_lock); + sd->work_thread = NULL; + } if (!gspca_dev->present) return; send_unknown(gspca_dev, sd->sensor); @@ -6893,19 +7025,33 @@ static int sd_querymenu(struct gspca_dev *gspca_dev, return -EINVAL; } +static int sd_setquality(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + + for (i = 0; i < ARRAY_SIZE(jpeg_qual) - 1; i++) { + if (val <= jpeg_qual[i]) + break; + } + if (i > 0 + && i == sd->reg08 + && val < jpeg_qual[sd->reg08]) + i--; + sd->reg08 = i; + sd->ctrls[QUALITY].val = jpeg_qual[i]; + if (gspca_dev->streaming) + jpeg_set_qual(sd->jpeg_hdr, sd->ctrls[QUALITY].val); + return gspca_dev->usb_err; +} + static int sd_set_jcomp(struct gspca_dev *gspca_dev, struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; - if (jcomp->quality < QUALITY_MIN) - sd->quality = QUALITY_MIN; - else if (jcomp->quality > QUALITY_MAX) - sd->quality = QUALITY_MAX; - else - sd->quality = jcomp->quality; - if (gspca_dev->streaming) - jpeg_set_qual(sd->jpeg_hdr, sd->quality); + sd_setquality(gspca_dev, jcomp->quality); + jcomp->quality = sd->ctrls[QUALITY].val; return gspca_dev->usb_err; } @@ -6915,7 +7061,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; memset(jcomp, 0, sizeof *jcomp); - jcomp->quality = sd->quality; + jcomp->quality = sd->ctrls[QUALITY].val; jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT; return 0; @@ -6938,7 +7084,7 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, #endif static const struct sd_desc sd_desc = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, @@ -7023,7 +7169,7 @@ static int sd_probe(struct usb_interface *intf, /* USB driver */ static struct usb_driver sd_driver = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c index eec75bb57203..351e9bafe8fe 100644 --- a/drivers/media/video/imx074.c +++ b/drivers/media/video/imx074.c @@ -468,18 +468,7 @@ static struct i2c_driver imx074_i2c_driver = { .id_table = imx074_id, }; -static int __init imx074_mod_init(void) -{ - return i2c_add_driver(&imx074_i2c_driver); -} - -static void __exit imx074_mod_exit(void) -{ - i2c_del_driver(&imx074_i2c_driver); -} - -module_init(imx074_mod_init); -module_exit(imx074_mod_exit); +module_i2c_driver(imx074_i2c_driver); MODULE_DESCRIPTION("Sony IMX074 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c index e5ed4db32e7b..548236333cce 100644 --- a/drivers/media/video/indycam.c +++ b/drivers/media/video/indycam.c @@ -387,15 +387,4 @@ static struct i2c_driver indycam_driver = { .id_table = indycam_id, }; -static __init int init_indycam(void) -{ - return i2c_add_driver(&indycam_driver); -} - -static __exit void exit_indycam(void) -{ - i2c_del_driver(&indycam_driver); -} - -module_init(init_indycam); -module_exit(exit_indycam); +module_i2c_driver(indycam_driver); diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index a7c41d32f414..04f192a0398a 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -471,7 +471,7 @@ static const struct i2c_device_id ir_kbd_id[] = { { } }; -static struct i2c_driver driver = { +static struct i2c_driver ir_kbd_driver = { .driver = { .name = "ir-kbd-i2c", }, @@ -480,21 +480,10 @@ static struct i2c_driver driver = { .id_table = ir_kbd_id, }; +module_i2c_driver(ir_kbd_driver); + /* ----------------------------------------------------------------------- */ MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller"); MODULE_DESCRIPTION("input driver for i2c IR remote controls"); MODULE_LICENSE("GPL"); - -static int __init ir_init(void) -{ - return i2c_add_driver(&driver); -} - -static void __exit ir_fini(void) -{ - i2c_del_driver(&driver); -} - -module_init(ir_init); -module_exit(ir_fini); diff --git a/drivers/media/video/ivtv/Makefile b/drivers/media/video/ivtv/Makefile index 71ab76a5ab26..77de8a45b46f 100644 --- a/drivers/media/video/ivtv/Makefile +++ b/drivers/media/video/ivtv/Makefile @@ -7,8 +7,8 @@ ivtv-objs := ivtv-routing.o ivtv-cards.o ivtv-controls.o \ obj-$(CONFIG_VIDEO_IVTV) += ivtv.o obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/video +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c index b31ee1bceef8..c60424601cb9 100644 --- a/drivers/media/video/ivtv/ivtv-controls.c +++ b/drivers/media/video/ivtv/ivtv-controls.c @@ -21,6 +21,7 @@ #include "ivtv-driver.h" #include "ivtv-ioctl.h" #include "ivtv-controls.h" +#include "ivtv-mailbox.h" static int ivtv_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) { @@ -99,3 +100,64 @@ struct cx2341x_handler_ops ivtv_cxhdl_ops = { .s_video_encoding = ivtv_s_video_encoding, .s_stream_vbi_fmt = ivtv_s_stream_vbi_fmt, }; + +int ivtv_g_pts_frame(struct ivtv *itv, s64 *pts, s64 *frame) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + + if (test_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags)) { + *pts = (s64)((u64)itv->last_dec_timing[2] << 32) | + (u64)itv->last_dec_timing[1]; + *frame = itv->last_dec_timing[0]; + return 0; + } + *pts = 0; + *frame = 0; + if (atomic_read(&itv->decoding)) { + if (ivtv_api(itv, CX2341X_DEC_GET_TIMING_INFO, 5, data)) { + IVTV_DEBUG_WARN("GET_TIMING: couldn't read clock\n"); + return -EIO; + } + memcpy(itv->last_dec_timing, data, sizeof(itv->last_dec_timing)); + set_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); + *pts = (s64)((u64) data[2] << 32) | (u64) data[1]; + *frame = data[0]; + /*timing->scr = (u64) (((u64) data[4] << 32) | (u64) (data[3]));*/ + } + return 0; +} + +static int ivtv_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ivtv *itv = container_of(ctrl->handler, struct ivtv, cxhdl.hdl); + + switch (ctrl->id) { + /* V4L2_CID_MPEG_VIDEO_DEC_PTS and V4L2_CID_MPEG_VIDEO_DEC_FRAME + control cluster */ + case V4L2_CID_MPEG_VIDEO_DEC_PTS: + return ivtv_g_pts_frame(itv, &itv->ctrl_pts->val64, + &itv->ctrl_frame->val64); + } + return 0; +} + +static int ivtv_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ivtv *itv = container_of(ctrl->handler, struct ivtv, cxhdl.hdl); + + switch (ctrl->id) { + /* V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK and MULTILINGUAL_PLAYBACK + control cluster */ + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: + itv->audio_stereo_mode = itv->ctrl_audio_playback->val - 1; + itv->audio_bilingual_mode = itv->ctrl_audio_multilingual_playback->val - 1; + ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); + break; + } + return 0; +} + +const struct v4l2_ctrl_ops ivtv_hdl_out_ops = { + .s_ctrl = ivtv_s_ctrl, + .g_volatile_ctrl = ivtv_g_volatile_ctrl, +}; diff --git a/drivers/media/video/ivtv/ivtv-controls.h b/drivers/media/video/ivtv/ivtv-controls.h index d12893dd0183..3999e6358312 100644 --- a/drivers/media/video/ivtv/ivtv-controls.h +++ b/drivers/media/video/ivtv/ivtv-controls.h @@ -22,5 +22,7 @@ #define IVTV_CONTROLS_H extern struct cx2341x_handler_ops ivtv_cxhdl_ops; +extern const struct v4l2_ctrl_ops ivtv_hdl_out_ops; +int ivtv_g_pts_frame(struct ivtv *itv, s64 *pts, s64 *frame); #endif diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 3949b7dc2368..679262ed13bc 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -55,7 +55,7 @@ #include "ivtv-routing.h" #include "ivtv-controls.h" #include "ivtv-gpio.h" - +#include <linux/dma-mapping.h> #include <media/tveeprom.h> #include <media/saa7115.h> #include <media/v4l2-chip-ident.h> @@ -99,7 +99,7 @@ static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, static unsigned int cardtype_c = 1; static unsigned int tuner_c = 1; -static bool radio_c = 1; +static int radio_c = 1; static unsigned int i2c_clock_period_c = 1; static char pal[] = "---"; static char secam[] = "--"; @@ -139,7 +139,7 @@ static int tunertype = -1; static int newi2c = -1; module_param_array(tuner, int, &tuner_c, 0644); -module_param_array(radio, bool, &radio_c, 0644); +module_param_array(radio, int, &radio_c, 0644); module_param_array(cardtype, int, &cardtype_c, 0644); module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); @@ -744,8 +744,6 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) itv->cur_dma_stream = -1; itv->cur_pio_stream = -1; - itv->audio_stereo_mode = AUDIO_STEREO; - itv->audio_bilingual_mode = AUDIO_MONO_LEFT; /* Ctrls */ itv->speed = 1000; @@ -815,7 +813,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev, IVTV_ERR("Can't enable device!\n"); return -EIO; } - if (pci_set_dma_mask(pdev, 0xffffffff)) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { IVTV_ERR("No suitable DMA available.\n"); return -EIO; } @@ -1200,6 +1198,32 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, itv->tuner_std = itv->std; if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + struct v4l2_ctrl_handler *hdl = itv->v4l2_dev.ctrl_handler; + + itv->ctrl_pts = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_VIDEO_DEC_PTS, 0, 0, 1, 0); + itv->ctrl_frame = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_VIDEO_DEC_FRAME, 0, 0x7fffffff, 1, 0); + /* Note: V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO is not supported, + mask that menu item. */ + itv->ctrl_audio_playback = + v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, + 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO); + itv->ctrl_audio_multilingual_playback = + v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, + 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT); + if (hdl->error) { + retval = hdl->error; + goto free_i2c; + } + v4l2_ctrl_cluster(2, &itv->ctrl_pts); + v4l2_ctrl_cluster(2, &itv->ctrl_audio_playback); ivtv_call_all(itv, video, s_std_output, itv->std); /* Turn off the output signal. The mpeg decoder is not yet active so without this you would get a green image until the @@ -1236,6 +1260,7 @@ free_streams: free_irq: free_irq(itv->pdev->irq, (void *)itv); free_i2c: + v4l2_ctrl_handler_free(&itv->cxhdl.hdl); exit_ivtv_i2c(itv); free_io: ivtv_iounmap(itv); @@ -1375,7 +1400,7 @@ static void ivtv_remove(struct pci_dev *pdev) else type = IVTV_DEC_STREAM_TYPE_MPG; ivtv_stop_v4l2_decode_stream(&itv->streams[type], - VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0); + V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY, 0); } ivtv_halt_firmware(itv); } @@ -1391,6 +1416,8 @@ static void ivtv_remove(struct pci_dev *pdev) ivtv_streams_cleanup(itv, 1); ivtv_udma_free(itv); + v4l2_ctrl_handler_free(&itv->cxhdl.hdl); + exit_ivtv_i2c(itv); free_irq(itv->pdev->irq, (void *)itv); diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 06f3d78389bf..f767df943954 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -331,6 +331,7 @@ struct ivtv_stream { struct ivtv *itv; /* for ease of use */ const char *name; /* name of the stream */ int type; /* stream type */ + u32 caps; /* V4L2 capabilities */ struct v4l2_fh *fh; /* pointer to the streaming filehandle */ spinlock_t qlock; /* locks access to the queues */ @@ -630,6 +631,16 @@ struct ivtv { struct v4l2_device v4l2_dev; struct cx2341x_handler cxhdl; + struct { + /* PTS/Frame count control cluster */ + struct v4l2_ctrl *ctrl_pts; + struct v4l2_ctrl *ctrl_frame; + }; + struct { + /* Audio Playback control cluster */ + struct v4l2_ctrl *ctrl_audio_playback; + struct v4l2_ctrl *ctrl_audio_multilingual_playback; + }; struct v4l2_ctrl_handler hdl_gpio; struct v4l2_subdev sd_gpio; /* GPIO sub-device */ u16 instance; @@ -649,7 +660,6 @@ struct ivtv { u8 audio_stereo_mode; /* decoder setting how to handle stereo MPEG audio */ u8 audio_bilingual_mode; /* decoder setting how to handle bilingual MPEG audio */ - /* Locking */ spinlock_t lock; /* lock access to this struct */ struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */ diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 2cd6c89b7d91..c9663e885b9f 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -900,7 +900,7 @@ int ivtv_v4l2_close(struct file *filp) if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) { struct ivtv_stream *s_vout = &itv->streams[IVTV_DEC_STREAM_TYPE_VOUT]; - ivtv_stop_decoding(id, VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0); + ivtv_stop_decoding(id, V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY, 0); /* If all output streams are closed, and if the user doesn't have IVTV_DEC_STREAM_TYPE_VOUT open, then disable CC on TV-out. */ diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index c4bc48143098..5452beef8e11 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -246,34 +246,40 @@ static int ivtv_validate_speed(int cur_speed, int new_speed) } static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, - struct video_command *vc, int try) + struct v4l2_decoder_cmd *dc, int try) { struct ivtv_stream *s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG]; if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; - switch (vc->cmd) { - case VIDEO_CMD_PLAY: { - vc->flags = 0; - vc->play.speed = ivtv_validate_speed(itv->speed, vc->play.speed); - if (vc->play.speed < 0) - vc->play.format = VIDEO_PLAY_FMT_GOP; + switch (dc->cmd) { + case V4L2_DEC_CMD_START: { + dc->flags &= V4L2_DEC_CMD_START_MUTE_AUDIO; + dc->start.speed = ivtv_validate_speed(itv->speed, dc->start.speed); + if (dc->start.speed < 0) + dc->start.format = V4L2_DEC_START_FMT_GOP; + else + dc->start.format = V4L2_DEC_START_FMT_NONE; + if (dc->start.speed != 500 && dc->start.speed != 1500) + dc->flags = dc->start.speed == 1000 ? 0 : + V4L2_DEC_CMD_START_MUTE_AUDIO; if (try) break; + itv->speed_mute_audio = dc->flags & V4L2_DEC_CMD_START_MUTE_AUDIO; if (ivtv_set_output_mode(itv, OUT_MPG) != OUT_MPG) return -EBUSY; if (test_and_clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags)) { /* forces ivtv_set_speed to be called */ itv->speed = 0; } - return ivtv_start_decoding(id, vc->play.speed); + return ivtv_start_decoding(id, dc->start.speed); } - case VIDEO_CMD_STOP: - vc->flags &= VIDEO_CMD_STOP_IMMEDIATELY|VIDEO_CMD_STOP_TO_BLACK; - if (vc->flags & VIDEO_CMD_STOP_IMMEDIATELY) - vc->stop.pts = 0; + case V4L2_DEC_CMD_STOP: + dc->flags &= V4L2_DEC_CMD_STOP_IMMEDIATELY | V4L2_DEC_CMD_STOP_TO_BLACK; + if (dc->flags & V4L2_DEC_CMD_STOP_IMMEDIATELY) + dc->stop.pts = 0; if (try) break; if (atomic_read(&itv->decoding) == 0) return 0; @@ -281,22 +287,22 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, return -EBUSY; itv->output_mode = OUT_NONE; - return ivtv_stop_v4l2_decode_stream(s, vc->flags, vc->stop.pts); + return ivtv_stop_v4l2_decode_stream(s, dc->flags, dc->stop.pts); - case VIDEO_CMD_FREEZE: - vc->flags &= VIDEO_CMD_FREEZE_TO_BLACK; + case V4L2_DEC_CMD_PAUSE: + dc->flags &= V4L2_DEC_CMD_PAUSE_TO_BLACK; if (try) break; if (itv->output_mode != OUT_MPG) return -EBUSY; if (atomic_read(&itv->decoding) > 0) { ivtv_vapi(itv, CX2341X_DEC_PAUSE_PLAYBACK, 1, - (vc->flags & VIDEO_CMD_FREEZE_TO_BLACK) ? 1 : 0); + (dc->flags & V4L2_DEC_CMD_PAUSE_TO_BLACK) ? 1 : 0); set_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); } break; - case VIDEO_CMD_CONTINUE: - vc->flags = 0; + case V4L2_DEC_CMD_RESUME: + dc->flags = 0; if (try) break; if (itv->output_mode != OUT_MPG) return -EBUSY; @@ -754,12 +760,15 @@ static int ivtv_s_register(struct file *file, void *fh, struct v4l2_dbg_register static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vcap) { - struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->pdev)); - vcap->capabilities = itv->v4l2_cap; /* capabilities */ + vcap->capabilities = itv->v4l2_cap | V4L2_CAP_DEVICE_CAPS; + vcap->device_caps = s->caps; return 0; } @@ -1476,8 +1485,6 @@ static int ivtv_log_status(struct file *file, void *fh) struct v4l2_audio audin; int i; - IVTV_INFO("================= START STATUS CARD #%d =================\n", - itv->instance); IVTV_INFO("Version: %s Card: %s\n", IVTV_VERSION, itv->card_name); if (itv->hw_flags & IVTV_HW_TVEEPROM) { struct tveeprom tv; @@ -1501,13 +1508,6 @@ static int ivtv_log_status(struct file *file, void *fh) "YUV Frames", "Passthrough", }; - static const char * const audio_modes[5] = { - "Stereo", - "Left", - "Right", - "Mono", - "Swapped" - }; static const char * const alpha_mode[4] = { "None", "Global", @@ -1536,9 +1536,6 @@ static int ivtv_log_status(struct file *file, void *fh) ivtv_get_output(itv, itv->active_output, &vidout); ivtv_get_audio_output(itv, 0, &audout); IVTV_INFO("Video Output: %s\n", vidout.name); - IVTV_INFO("Audio Output: %s (Stereo/Bilingual: %s/%s)\n", audout.name, - audio_modes[itv->audio_stereo_mode], - audio_modes[itv->audio_bilingual_mode]); if (mode < 0 || mode > OUT_PASSTHROUGH) mode = OUT_NONE; IVTV_INFO("Output Mode: %s\n", output_modes[mode]); @@ -1566,12 +1563,27 @@ static int ivtv_log_status(struct file *file, void *fh) IVTV_INFO("Read MPG/VBI: %lld/%lld bytes\n", (long long)itv->mpg_data_received, (long long)itv->vbi_data_inserted); - IVTV_INFO("================== END STATUS CARD #%d ==================\n", - itv->instance); - return 0; } +static int ivtv_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *dec) +{ + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + + IVTV_DEBUG_IOCTL("VIDIOC_DECODER_CMD %d\n", dec->cmd); + return ivtv_video_command(itv, id, dec, false); +} + +static int ivtv_try_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *dec) +{ + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + + IVTV_DEBUG_IOCTL("VIDIOC_TRY_DECODER_CMD %d\n", dec->cmd); + return ivtv_video_command(itv, id, dec, true); +} + static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) { struct ivtv_open_id *id = fh2id(filp->private_data); @@ -1605,9 +1617,15 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) return ivtv_yuv_prep_frame(itv, args); } + case IVTV_IOC_PASSTHROUGH_MODE: + IVTV_DEBUG_IOCTL("IVTV_IOC_PASSTHROUGH_MODE\n"); + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + return ivtv_passthrough_mode(itv, *(int *)arg != 0); + case VIDEO_GET_PTS: { - u32 data[CX2341X_MBOX_MAX_DATA]; - u64 *pts = arg; + s64 *pts = arg; + s64 frame; IVTV_DEBUG_IOCTL("VIDEO_GET_PTS\n"); if (s->type < IVTV_DEC_STREAM_TYPE_MPG) { @@ -1616,29 +1634,12 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) } if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; - - if (test_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags)) { - *pts = (u64) ((u64)itv->last_dec_timing[2] << 32) | - (u64)itv->last_dec_timing[1]; - break; - } - *pts = 0; - if (atomic_read(&itv->decoding)) { - if (ivtv_api(itv, CX2341X_DEC_GET_TIMING_INFO, 5, data)) { - IVTV_DEBUG_WARN("GET_TIMING: couldn't read clock\n"); - return -EIO; - } - memcpy(itv->last_dec_timing, data, sizeof(itv->last_dec_timing)); - set_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); - *pts = (u64) ((u64) data[2] << 32) | (u64) data[1]; - /*timing->scr = (u64) (((u64) data[4] << 32) | (u64) (data[3]));*/ - } - break; + return ivtv_g_pts_frame(itv, pts, &frame); } case VIDEO_GET_FRAME_COUNT: { - u32 data[CX2341X_MBOX_MAX_DATA]; - u64 *frame = arg; + s64 *frame = arg; + s64 pts; IVTV_DEBUG_IOCTL("VIDEO_GET_FRAME_COUNT\n"); if (s->type < IVTV_DEC_STREAM_TYPE_MPG) { @@ -1647,71 +1648,58 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) } if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; - - if (test_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags)) { - *frame = itv->last_dec_timing[0]; - break; - } - *frame = 0; - if (atomic_read(&itv->decoding)) { - if (ivtv_api(itv, CX2341X_DEC_GET_TIMING_INFO, 5, data)) { - IVTV_DEBUG_WARN("GET_TIMING: couldn't read clock\n"); - return -EIO; - } - memcpy(itv->last_dec_timing, data, sizeof(itv->last_dec_timing)); - set_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); - *frame = data[0]; - } - break; + return ivtv_g_pts_frame(itv, &pts, frame); } case VIDEO_PLAY: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_PLAY\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_PLAY; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_START; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_STOP: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_STOP\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_STOP; - vc.flags = VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_STOP; + dc.flags = V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_FREEZE: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_FREEZE\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_FREEZE; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_PAUSE; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_CONTINUE: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_CONTINUE\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_CONTINUE; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_RESUME; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_COMMAND: case VIDEO_TRY_COMMAND: { - struct video_command *vc = arg; + /* Note: struct v4l2_decoder_cmd has the same layout as + struct video_command */ + struct v4l2_decoder_cmd *dc = arg; int try = (cmd == VIDEO_TRY_COMMAND); if (try) - IVTV_DEBUG_IOCTL("VIDEO_TRY_COMMAND %d\n", vc->cmd); + IVTV_DEBUG_IOCTL("VIDEO_TRY_COMMAND %d\n", dc->cmd); else - IVTV_DEBUG_IOCTL("VIDEO_COMMAND %d\n", vc->cmd); - return ivtv_video_command(itv, id, vc, try); + IVTV_DEBUG_IOCTL("VIDEO_COMMAND %d\n", dc->cmd); + return ivtv_video_command(itv, id, dc, try); } case VIDEO_GET_EVENT: { @@ -1775,17 +1763,13 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) IVTV_DEBUG_IOCTL("AUDIO_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - itv->audio_stereo_mode = iarg; - ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); - return 0; + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg); case AUDIO_BILINGUAL_CHANNEL_SELECT: IVTV_DEBUG_IOCTL("AUDIO_BILINGUAL_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - itv->audio_bilingual_mode = iarg; - ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); - return 0; + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg); default: return -EINVAL; @@ -1800,6 +1784,7 @@ static long ivtv_default(struct file *file, void *fh, bool valid_prio, if (!valid_prio) { switch (cmd) { + case IVTV_IOC_PASSTHROUGH_MODE: case VIDEO_PLAY: case VIDEO_STOP: case VIDEO_FREEZE: @@ -1825,6 +1810,7 @@ static long ivtv_default(struct file *file, void *fh, bool valid_prio, } case IVTV_IOC_DMA_FRAME: + case IVTV_IOC_PASSTHROUGH_MODE: case VIDEO_GET_PTS: case VIDEO_GET_FRAME_COUNT: case VIDEO_GET_EVENT: @@ -1889,6 +1875,8 @@ static const struct v4l2_ioctl_ops ivtv_ioctl_ops = { .vidioc_enum_fmt_vid_cap = ivtv_enum_fmt_vid_cap, .vidioc_encoder_cmd = ivtv_encoder_cmd, .vidioc_try_encoder_cmd = ivtv_try_encoder_cmd, + .vidioc_decoder_cmd = ivtv_decoder_cmd, + .vidioc_try_decoder_cmd = ivtv_try_decoder_cmd, .vidioc_enum_fmt_vid_out = ivtv_enum_fmt_vid_out, .vidioc_g_fmt_vid_cap = ivtv_g_fmt_vid_cap, .vidioc_g_fmt_vbi_cap = ivtv_g_fmt_vbi_cap, diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index c6e28b4ebbed..7ea5ca7f012b 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -78,60 +78,73 @@ static struct { int num_offset; int dma, pio; enum v4l2_buf_type buf_type; + u32 v4l2_caps; const struct v4l2_file_operations *fops; } ivtv_stream_info[] = { { /* IVTV_ENC_STREAM_TYPE_MPG */ "encoder MPG", VFL_TYPE_GRABBER, 0, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_YUV */ "encoder YUV", VFL_TYPE_GRABBER, IVTV_V4L2_ENC_YUV_OFFSET, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_VBI */ "encoder VBI", VFL_TYPE_VBI, 0, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_PCM */ "encoder PCM", VFL_TYPE_GRABBER, IVTV_V4L2_ENC_PCM_OFFSET, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_PRIVATE, + V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_RAD */ "encoder radio", VFL_TYPE_RADIO, 0, PCI_DMA_NONE, 1, V4L2_BUF_TYPE_PRIVATE, + V4L2_CAP_RADIO | V4L2_CAP_TUNER, &ivtv_v4l2_enc_fops }, { /* IVTV_DEC_STREAM_TYPE_MPG */ "decoder MPG", VFL_TYPE_GRABBER, IVTV_V4L2_DEC_MPG_OFFSET, PCI_DMA_TODEVICE, 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops }, { /* IVTV_DEC_STREAM_TYPE_VBI */ "decoder VBI", VFL_TYPE_VBI, IVTV_V4L2_DEC_VBI_OFFSET, PCI_DMA_NONE, 1, V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_DEC_STREAM_TYPE_VOUT */ "decoder VOUT", VFL_TYPE_VBI, IVTV_V4L2_DEC_VOUT_OFFSET, PCI_DMA_NONE, 1, V4L2_BUF_TYPE_VBI_OUTPUT, + V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops }, { /* IVTV_DEC_STREAM_TYPE_YUV */ "decoder YUV", VFL_TYPE_GRABBER, IVTV_V4L2_DEC_YUV_OFFSET, PCI_DMA_TODEVICE, 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops } }; @@ -149,6 +162,7 @@ static void ivtv_stream_init(struct ivtv *itv, int type) s->itv = itv; s->type = type; s->name = ivtv_stream_info[type].name; + s->caps = ivtv_stream_info[type].v4l2_caps; if (ivtv_stream_info[type].pio) s->dma = PCI_DMA_NONE; @@ -209,8 +223,8 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) s->vdev->num = num; s->vdev->v4l2_dev = &itv->v4l2_dev; - s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler; s->vdev->fops = ivtv_stream_info[type].fops; + s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler; s->vdev->release = video_device_release; s->vdev->tvnorms = V4L2_STD_ALL; s->vdev->lock = &itv->serialize_lock; @@ -891,7 +905,7 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts) IVTV_DEBUG_INFO("Stop Decode at %llu, flags: %x\n", (unsigned long long)pts, flags); /* Stop Decoder */ - if (!(flags & VIDEO_CMD_STOP_IMMEDIATELY) || pts) { + if (!(flags & V4L2_DEC_CMD_STOP_IMMEDIATELY) || pts) { u32 tmp = 0; /* Wait until the decoder is no longer running */ @@ -911,7 +925,7 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts) break; } } - ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 3, flags & VIDEO_CMD_STOP_TO_BLACK, 0, 0); + ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 3, flags & V4L2_DEC_CMD_STOP_TO_BLACK, 0, 0); /* turn off notification of dual/stereo mode change */ ivtv_vapi(itv, CX2341X_DEC_SET_EVENT_NOTIFICATION, 4, 0, 0, IVTV_IRQ_DEC_AUD_MODE_CHG, -1); diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c index afa91182b448..ee7ca2dcca2f 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/video/ks0127.c @@ -721,15 +721,4 @@ static struct i2c_driver ks0127_driver = { .id_table = ks0127_id, }; -static __init int init_ks0127(void) -{ - return i2c_add_driver(&ks0127_driver); -} - -static __exit void exit_ks0127(void) -{ - i2c_del_driver(&ks0127_driver); -} - -module_init(init_ks0127); -module_exit(exit_ks0127); +module_i2c_driver(ks0127_driver); diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c index 303ffa7df4ac..0991576f4c82 100644 --- a/drivers/media/video/m52790.c +++ b/drivers/media/video/m52790.c @@ -213,15 +213,4 @@ static struct i2c_driver m52790_driver = { .id_table = m52790_id, }; -static __init int init_m52790(void) -{ - return i2c_add_driver(&m52790_driver); -} - -static __exit void exit_m52790(void) -{ - i2c_del_driver(&m52790_driver); -} - -module_init(init_m52790); -module_exit(exit_m52790); +module_i2c_driver(m52790_driver); diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 93d768db9f33..d718aee01c77 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -982,8 +982,8 @@ static int __devinit m5mols_probe(struct i2c_client *client, } sd = &info->sd; - strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); v4l2_i2c_subdev_init(sd, client, &m5mols_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; sd->internal_ops = &m5mols_subdev_internal_ops; @@ -1057,18 +1057,7 @@ static struct i2c_driver m5mols_i2c_driver = { .id_table = m5mols_id, }; -static int __init m5mols_mod_init(void) -{ - return i2c_add_driver(&m5mols_i2c_driver); -} - -static void __exit m5mols_mod_exit(void) -{ - i2c_del_driver(&m5mols_i2c_driver); -} - -module_init(m5mols_mod_init); -module_exit(m5mols_mod_exit); +module_i2c_driver(m5mols_i2c_driver); MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>"); diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c index 37d20e73908a..996ac34d9a89 100644 --- a/drivers/media/video/marvell-ccic/mcam-core.c +++ b/drivers/media/video/marvell-ccic/mcam-core.c @@ -509,11 +509,17 @@ static void mcam_sg_next_buffer(struct mcam_camera *cam) buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue); list_del_init(&buf->queue); + /* + * Very Bad Not Good Things happen if you don't clear + * C1_DESC_ENA before making any descriptor changes. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA); mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa); mcam_reg_write(cam, REG_DESC_LEN_Y, buf->dma_desc_nent*sizeof(struct mcam_dma_desc)); mcam_reg_write(cam, REG_DESC_LEN_U, 0); mcam_reg_write(cam, REG_DESC_LEN_V, 0); + mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); cam->vb_bufs[0] = buf; } @@ -533,7 +539,6 @@ static void mcam_ctlr_dma_sg(struct mcam_camera *cam) mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_3WORD); mcam_sg_next_buffer(cam); - mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); cam->nbufs = 3; } @@ -556,17 +561,16 @@ static void mcam_dma_sg_done(struct mcam_camera *cam, int frame) struct mcam_vb_buffer *buf = cam->vb_bufs[0]; /* - * Very Bad Not Good Things happen if you don't clear - * C1_DESC_ENA before making any descriptor changes. + * If we're no longer supposed to be streaming, don't do anything. */ - mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA); + if (cam->state != S_STREAMING) + return; /* * If we have another buffer available, put it in and * restart the engine. */ if (!list_empty(&cam->buffers)) { mcam_sg_next_buffer(cam); - mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); mcam_ctlr_start(cam); /* * Otherwise set CF_SG_RESTART and the controller will @@ -737,7 +741,14 @@ static void mcam_ctlr_stop_dma(struct mcam_camera *cam) mcam_ctlr_stop(cam); cam->state = S_IDLE; spin_unlock_irqrestore(&cam->dev_lock, flags); - msleep(40); + /* + * This is a brutally long sleep, but experience shows that + * it can take the controller a while to get the message that + * it needs to stop grabbing frames. In particular, we can + * sometimes (on mmp) get a frame at the end WITHOUT the + * start-of-frame indication. + */ + msleep(150); if (test_bit(CF_DMA_ACTIVE, &cam->flags)) cam_err(cam, "Timeout waiting for DMA to end\n"); /* This would be bad news - what now? */ @@ -880,6 +891,7 @@ static int mcam_read_setup(struct mcam_camera *cam) * Turn it loose. */ spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); mcam_reset_buffers(cam); mcam_ctlr_irq_enable(cam); cam->state = S_STREAMING; @@ -922,7 +934,7 @@ static void mcam_vb_buf_queue(struct vb2_buffer *vb) spin_lock_irqsave(&cam->dev_lock, flags); start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); list_add(&mvb->queue, &cam->buffers); - if (test_bit(CF_SG_RESTART, &cam->flags)) + if (cam->state == S_STREAMING && test_bit(CF_SG_RESTART, &cam->flags)) mcam_sg_restart(cam); spin_unlock_irqrestore(&cam->dev_lock, flags); if (start) @@ -1555,15 +1567,12 @@ static int mcam_v4l_release(struct file *filp) { struct mcam_camera *cam = filp->private_data; - cam_err(cam, "Release, %d frames, %d singles, %d delivered\n", frames, + cam_dbg(cam, "Release, %d frames, %d singles, %d delivered\n", frames, singles, delivered); mutex_lock(&cam->s_mutex); (cam->users)--; - if (filp == cam->owner) { - mcam_ctlr_stop_dma(cam); - cam->owner = NULL; - } if (cam->users == 0) { + mcam_ctlr_stop_dma(cam); mcam_cleanup_vb2(cam); mcam_ctlr_power_down(cam); if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) @@ -1688,6 +1697,8 @@ int mccic_irq(struct mcam_camera *cam, unsigned int irqs) if (irqs & (IRQ_EOF0 << frame)) { mcam_frame_complete(cam, frame); handled = 1; + if (cam->buffer_mode == B_DMA_sg) + break; } /* * If a frame starts, note that we have DMA active. This diff --git a/drivers/media/video/marvell-ccic/mcam-core.h b/drivers/media/video/marvell-ccic/mcam-core.h index 917200e63255..bd6acba9fb37 100644 --- a/drivers/media/video/marvell-ccic/mcam-core.h +++ b/drivers/media/video/marvell-ccic/mcam-core.h @@ -107,7 +107,6 @@ struct mcam_camera { enum mcam_state state; unsigned long flags; /* Buffer status, mainly (dev_lock) */ int users; /* How many open FDs */ - struct file *owner; /* Who has data access (v4l2) */ /* * Subsystem structures. diff --git a/drivers/media/video/marvell-ccic/mmp-driver.c b/drivers/media/video/marvell-ccic/mmp-driver.c index 0d64e2d7474a..d23552323f45 100644 --- a/drivers/media/video/marvell-ccic/mmp-driver.c +++ b/drivers/media/video/marvell-ccic/mmp-driver.c @@ -106,6 +106,13 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev) /* * Power control. */ +static void mmpcam_power_up_ctlr(struct mmp_camera *cam) +{ + iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); + mdelay(1); +} + static void mmpcam_power_up(struct mcam_camera *mcam) { struct mmp_camera *cam = mcam_to_cam(mcam); @@ -113,9 +120,7 @@ static void mmpcam_power_up(struct mcam_camera *mcam) /* * Turn on power and clocks to the controller. */ - iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); - iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); - mdelay(1); + mmpcam_power_up_ctlr(cam); /* * Provide power to the sensor. */ @@ -335,7 +340,7 @@ static int mmpcam_resume(struct platform_device *pdev) * touch a register even if nothing was active before; trust * me, it's better this way. */ - mmpcam_power_up(&cam->mcam); + mmpcam_power_up_ctlr(cam); return mccic_resume(&cam->mcam); } diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index d7cd0f633f63..82ce50721de3 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -881,18 +881,7 @@ static struct i2c_driver msp_driver = { .id_table = msp_id, }; -static __init int init_msp(void) -{ - return i2c_add_driver(&msp_driver); -} - -static __exit void exit_msp(void) -{ - i2c_del_driver(&msp_driver); -} - -module_init(init_msp); -module_exit(exit_msp); +module_i2c_driver(msp_driver); /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index 097c9d3d04a8..7e648183f157 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -730,18 +730,7 @@ static struct i2c_driver mt9m001_i2c_driver = { .id_table = mt9m001_id, }; -static int __init mt9m001_mod_init(void) -{ - return i2c_add_driver(&mt9m001_i2c_driver); -} - -static void __exit mt9m001_mod_exit(void) -{ - i2c_del_driver(&mt9m001_i2c_driver); -} - -module_init(mt9m001_mod_init); -module_exit(mt9m001_mod_exit); +module_i2c_driver(mt9m001_i2c_driver); MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c new file mode 100644 index 000000000000..7636672c3548 --- /dev/null +++ b/drivers/media/video/mt9m032.c @@ -0,0 +1,868 @@ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund <gwlund@lundeng.com> + * Author: Martin Hostettler <martin@neutronstar.dyndns.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/v4l2-mediabus.h> + +#include <media/media-entity.h> +#include <media/mt9m032.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> + +#include "aptina-pll.h" + +/* + * width and height include active boundary and black parts + * + * column 0- 15 active boundary + * column 16-1455 image + * column 1456-1471 active boundary + * column 1472-1599 black + * + * row 0- 51 black + * row 53- 59 active boundary + * row 60-1139 image + * row 1140-1147 active boundary + * row 1148-1151 black + */ + +#define MT9M032_PIXEL_ARRAY_WIDTH 1600 +#define MT9M032_PIXEL_ARRAY_HEIGHT 1152 + +#define MT9M032_CHIP_VERSION 0x00 +#define MT9M032_CHIP_VERSION_VALUE 0x1402 +#define MT9M032_ROW_START 0x01 +#define MT9M032_ROW_START_MIN 0 +#define MT9M032_ROW_START_MAX 1152 +#define MT9M032_ROW_START_DEF 60 +#define MT9M032_COLUMN_START 0x02 +#define MT9M032_COLUMN_START_MIN 0 +#define MT9M032_COLUMN_START_MAX 1600 +#define MT9M032_COLUMN_START_DEF 16 +#define MT9M032_ROW_SIZE 0x03 +#define MT9M032_ROW_SIZE_MIN 32 +#define MT9M032_ROW_SIZE_MAX 1152 +#define MT9M032_ROW_SIZE_DEF 1080 +#define MT9M032_COLUMN_SIZE 0x04 +#define MT9M032_COLUMN_SIZE_MIN 32 +#define MT9M032_COLUMN_SIZE_MAX 1600 +#define MT9M032_COLUMN_SIZE_DEF 1440 +#define MT9M032_HBLANK 0x05 +#define MT9M032_VBLANK 0x06 +#define MT9M032_VBLANK_MAX 0x7ff +#define MT9M032_SHUTTER_WIDTH_HIGH 0x08 +#define MT9M032_SHUTTER_WIDTH_LOW 0x09 +#define MT9M032_SHUTTER_WIDTH_MIN 1 +#define MT9M032_SHUTTER_WIDTH_MAX 1048575 +#define MT9M032_SHUTTER_WIDTH_DEF 1943 +#define MT9M032_PIX_CLK_CTRL 0x0a +#define MT9M032_PIX_CLK_CTRL_INV_PIXCLK 0x8000 +#define MT9M032_RESTART 0x0b +#define MT9M032_RESET 0x0d +#define MT9M032_PLL_CONFIG1 0x11 +#define MT9M032_PLL_CONFIG1_OUTDIV_MASK 0x3f +#define MT9M032_PLL_CONFIG1_MUL_SHIFT 8 +#define MT9M032_READ_MODE1 0x1e +#define MT9M032_READ_MODE2 0x20 +#define MT9M032_READ_MODE2_VFLIP_SHIFT 15 +#define MT9M032_READ_MODE2_HFLIP_SHIFT 14 +#define MT9M032_READ_MODE2_ROW_BLC 0x40 +#define MT9M032_GAIN_GREEN1 0x2b +#define MT9M032_GAIN_BLUE 0x2c +#define MT9M032_GAIN_RED 0x2d +#define MT9M032_GAIN_GREEN2 0x2e + +/* write only */ +#define MT9M032_GAIN_ALL 0x35 +#define MT9M032_GAIN_DIGITAL_MASK 0x7f +#define MT9M032_GAIN_DIGITAL_SHIFT 8 +#define MT9M032_GAIN_AMUL_SHIFT 6 +#define MT9M032_GAIN_ANALOG_MASK 0x3f +#define MT9M032_FORMATTER1 0x9e +#define MT9M032_FORMATTER2 0x9f +#define MT9M032_FORMATTER2_DOUT_EN 0x1000 +#define MT9M032_FORMATTER2_PIXCLK_EN 0x2000 + +/* + * The available MT9M032 datasheet is missing documentation for register 0x10 + * MT9P031 seems to be close enough, so use constants from that datasheet for + * now. + * But keep the name MT9P031 to remind us, that this isn't really confirmed + * for this sensor. + */ +#define MT9P031_PLL_CONTROL 0x10 +#define MT9P031_PLL_CONTROL_PWROFF 0x0050 +#define MT9P031_PLL_CONTROL_PWRON 0x0051 +#define MT9P031_PLL_CONTROL_USEPLL 0x0052 +#define MT9P031_PLL_CONFIG2 0x11 +#define MT9P031_PLL_CONFIG2_P1_DIV_MASK 0x1f + +struct mt9m032 { + struct v4l2_subdev subdev; + struct media_pad pad; + struct mt9m032_platform_data *pdata; + + unsigned int pix_clock; + + struct v4l2_ctrl_handler ctrls; + struct { + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + }; + + struct mutex lock; /* Protects streaming, format, interval and crop */ + + bool streaming; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + struct v4l2_fract frame_interval; +}; + +#define to_mt9m032(sd) container_of(sd, struct mt9m032, subdev) +#define to_dev(sensor) \ + (&((struct i2c_client *)v4l2_get_subdevdata(&(sensor)->subdev))->dev) + +static int mt9m032_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9m032_write(struct i2c_client *client, u8 reg, const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static u32 mt9m032_row_time(struct mt9m032 *sensor, unsigned int width) +{ + unsigned int effective_width; + u32 ns; + + effective_width = width + 716; /* empirical value */ + ns = div_u64(1000000000ULL * effective_width, sensor->pix_clock); + dev_dbg(to_dev(sensor), "MT9M032 line time: %u ns\n", ns); + return ns; +} + +static int mt9m032_update_timing(struct mt9m032 *sensor, + struct v4l2_fract *interval) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct v4l2_rect *crop = &sensor->crop; + unsigned int min_vblank; + unsigned int vblank; + u32 row_time; + + if (!interval) + interval = &sensor->frame_interval; + + row_time = mt9m032_row_time(sensor, crop->width); + + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + + if (vblank > MT9M032_VBLANK_MAX) { + /* hardware limits to 11 bit values */ + interval->denominator = 1000; + interval->numerator = + div_u64((crop->height + MT9M032_VBLANK_MAX) * + (u64)row_time * interval->denominator, + 1000000000ULL); + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + } + /* enforce minimal 1.6ms blanking time. */ + min_vblank = 1600000 / row_time; + vblank = clamp_t(unsigned int, vblank, min_vblank, MT9M032_VBLANK_MAX); + + return mt9m032_write(client, MT9M032_VBLANK, vblank); +} + +static int mt9m032_update_geom_timing(struct mt9m032 *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + ret = mt9m032_write(client, MT9M032_COLUMN_SIZE, + sensor->crop.width - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_SIZE, + sensor->crop.height - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_COLUMN_START, + sensor->crop.left); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_START, + sensor->crop.top); + if (!ret) + ret = mt9m032_update_timing(sensor, NULL); + return ret; +} + +static int update_formatter2(struct mt9m032 *sensor, bool streaming) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + u16 reg_val = MT9M032_FORMATTER2_DOUT_EN + | 0x0070; /* parts reserved! */ + /* possibly for changing to 14-bit mode */ + + if (streaming) + reg_val |= MT9M032_FORMATTER2_PIXCLK_EN; /* pixclock enable */ + + return mt9m032_write(client, MT9M032_FORMATTER2, reg_val); +} + +static int mt9m032_setup_pll(struct mt9m032 *sensor) +{ + static const struct aptina_pll_limits limits = { + .ext_clock_min = 8000000, + .ext_clock_max = 16500000, + .int_clock_min = 2000000, + .int_clock_max = 24000000, + .out_clock_min = 322000000, + .out_clock_max = 693000000, + .pix_clock_max = 99000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 1, + .p1_max = 128, + }; + + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct mt9m032_platform_data *pdata = sensor->pdata; + struct aptina_pll pll; + int ret; + + pll.ext_clock = pdata->ext_clock; + pll.pix_clock = pdata->pix_clock; + + ret = aptina_pll_calculate(&client->dev, &limits, &pll); + if (ret < 0) + return ret; + + sensor->pix_clock = pdata->pix_clock; + + ret = mt9m032_write(client, MT9M032_PLL_CONFIG1, + (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT) + | (pll.p1 - 1)); + if (!ret) + ret = mt9m032_write(client, MT9P031_PLL_CONFIG2, pll.n - 1); + if (!ret) + ret = mt9m032_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON | + MT9P031_PLL_CONTROL_USEPLL); + if (!ret) /* more reserved, Continuous, Master Mode */ + ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8006); + if (!ret) /* Set 14-bit mode, select 7 divider */ + ret = mt9m032_write(client, MT9M032_FORMATTER1, 0x111e); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Subdev pad operations + */ + +static int mt9m032_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index != 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_Y8_1X8; + return 0; +} + +static int mt9m032_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index != 0 || fse->code != V4L2_MBUS_FMT_Y8_1X8) + return -EINVAL; + + fse->min_width = MT9M032_COLUMN_SIZE_DEF; + fse->max_width = MT9M032_COLUMN_SIZE_DEF; + fse->min_height = MT9M032_ROW_SIZE_DEF; + fse->max_height = MT9M032_ROW_SIZE_DEF; + + return 0; +} + +/** + * __mt9m032_get_pad_crop() - get crop rect + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try crop rect from + * @which: select try or active crop rect + * + * Returns a pointer the current active or fh relative try crop rect + */ +static struct v4l2_rect * +__mt9m032_get_pad_crop(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->crop; + default: + return NULL; + } +} + +/** + * __mt9m032_get_pad_format() - get format + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try format from + * @which: select try or active format + * + * Returns a pointer the current active or fh relative try format + */ +static struct v4l2_mbus_framefmt * +__mt9m032_get_pad_format(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->format; + default: + return NULL; + } +} + +static int mt9m032_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Scaling is not supported, the format is thus fixed. */ + ret = mt9m032_get_pad_format(subdev, fh, fmt); + +done: + mutex_lock(&sensor->lock); + return ret; +} + +static int mt9m032_get_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + crop->rect = *__mt9m032_get_pad_crop(sensor, fh, crop->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + int ret = 0; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), MT9M032_COLUMN_START_MIN, + MT9M032_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), MT9M032_ROW_START_MIN, + MT9M032_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), MT9M032_COLUMN_SIZE_MIN, + MT9M032_COLUMN_SIZE_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), MT9M032_ROW_SIZE_MIN, + MT9M032_ROW_SIZE_MAX); + + rect.width = min(rect.width, MT9M032_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9M032_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9m032_get_pad_crop(sensor, fh, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + format = __mt9m032_get_pad_format(sensor, fh, crop->which); + format->width = rect.width; + format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ret = mt9m032_update_geom_timing(sensor); + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_get_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + memset(fi, 0, sizeof(*fi)); + fi->interval = sensor->frame_interval; + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto done; + } + + /* Avoid divisions by 0. */ + if (fi->interval.denominator == 0) + fi->interval.denominator = 1; + + ret = mt9m032_update_timing(sensor, &fi->interval); + if (!ret) + sensor->frame_interval = fi->interval; + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_s_stream(struct v4l2_subdev *subdev, int streaming) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + ret = update_formatter2(sensor, streaming); + if (!ret) + sensor->streaming = streaming; + mutex_unlock(&sensor->lock); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m032_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int val; + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + if (reg->match.addr != client->addr) + return -ENODEV; + + val = mt9m032_read(client, reg->reg); + if (val < 0) + return -EIO; + + reg->size = 2; + reg->val = val; + + return 0; +} + +static int mt9m032_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + return mt9m032_write(client, reg->reg, reg->val); +} +#endif + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +static int update_read_mode2(struct mt9m032 *sensor, bool vflip, bool hflip) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int reg_val = (vflip << MT9M032_READ_MODE2_VFLIP_SHIFT) + | (hflip << MT9M032_READ_MODE2_HFLIP_SHIFT) + | MT9M032_READ_MODE2_ROW_BLC + | 0x0007; + + return mt9m032_write(client, MT9M032_READ_MODE2, reg_val); +} + +static int mt9m032_set_gain(struct mt9m032 *sensor, s32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int digital_gain_val; /* in 1/8th (0..127) */ + int analog_mul; /* 0 or 1 */ + int analog_gain_val; /* in 1/16th. (0..63) */ + u16 reg_val; + + digital_gain_val = 51; /* from setup example */ + + if (val < 63) { + analog_mul = 0; + analog_gain_val = val; + } else { + analog_mul = 1; + analog_gain_val = val / 2; + } + + /* a_gain = (1 + analog_mul) + (analog_gain_val + 1) / 16 */ + /* overall_gain = a_gain * (1 + digital_gain_val / 8) */ + + reg_val = ((digital_gain_val & MT9M032_GAIN_DIGITAL_MASK) + << MT9M032_GAIN_DIGITAL_SHIFT) + | ((analog_mul & 1) << MT9M032_GAIN_AMUL_SHIFT) + | (analog_gain_val & MT9M032_GAIN_ANALOG_MASK); + + return mt9m032_write(client, MT9M032_GAIN_ALL, reg_val); +} + +static int mt9m032_try_ctrl(struct v4l2_ctrl *ctrl) +{ + if (ctrl->id == V4L2_CID_GAIN && ctrl->val >= 63) { + /* round because of multiplier used for values >= 63 */ + ctrl->val &= ~1; + } + + return 0; +} + +static int mt9m032_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m032 *sensor = + container_of(ctrl->handler, struct mt9m032, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + return mt9m032_set_gain(sensor, ctrl->val); + + case V4L2_CID_HFLIP: + /* case V4L2_CID_VFLIP: -- In the same cluster */ + return update_read_mode2(sensor, sensor->vflip->val, + sensor->hflip->val); + + case V4L2_CID_EXPOSURE: + ret = mt9m032_write(client, MT9M032_SHUTTER_WIDTH_HIGH, + (ctrl->val >> 16) & 0xffff); + if (ret < 0) + return ret; + + return mt9m032_write(client, MT9M032_SHUTTER_WIDTH_LOW, + ctrl->val & 0xffff); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9m032_ctrl_ops = { + .s_ctrl = mt9m032_set_ctrl, + .try_ctrl = mt9m032_try_ctrl, +}; + +/* -------------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops mt9m032_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m032_g_register, + .s_register = mt9m032_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9m032_video_ops = { + .s_stream = mt9m032_s_stream, + .g_frame_interval = mt9m032_get_frame_interval, + .s_frame_interval = mt9m032_set_frame_interval, +}; + +static const struct v4l2_subdev_pad_ops mt9m032_pad_ops = { + .enum_mbus_code = mt9m032_enum_mbus_code, + .enum_frame_size = mt9m032_enum_frame_size, + .get_fmt = mt9m032_get_pad_format, + .set_fmt = mt9m032_set_pad_format, + .set_crop = mt9m032_set_pad_crop, + .get_crop = mt9m032_get_pad_crop, +}; + +static const struct v4l2_subdev_ops mt9m032_ops = { + .core = &mt9m032_core_ops, + .video = &mt9m032_video_ops, + .pad = &mt9m032_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9m032_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct i2c_adapter *adapter = client->adapter; + struct mt9m032 *sensor; + int chip_version; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + if (!client->dev.platform_data) + return -ENODEV; + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) + return -ENOMEM; + + mutex_init(&sensor->lock); + + sensor->pdata = client->dev.platform_data; + + v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION); + if (chip_version != MT9M032_CHIP_VERSION_VALUE) { + dev_err(&client->dev, "MT9M032 not detected, wrong version " + "0x%04x\n", chip_version); + ret = -ENODEV; + goto error_sensor; + } + + dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n", + client->addr); + + sensor->frame_interval.numerator = 1; + sensor->frame_interval.denominator = 30; + + sensor->crop.left = MT9M032_COLUMN_START_DEF; + sensor->crop.top = MT9M032_ROW_START_DEF; + sensor->crop.width = MT9M032_COLUMN_SIZE_DEF; + sensor->crop.height = MT9M032_ROW_SIZE_DEF; + + sensor->format.width = sensor->crop.width; + sensor->format.height = sensor->crop.height; + sensor->format.code = V4L2_MBUS_FMT_Y8_1X8; + sensor->format.field = V4L2_FIELD_NONE; + sensor->format.colorspace = V4L2_COLORSPACE_SRGB; + + v4l2_ctrl_handler_init(&sensor->ctrls, 4); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + + sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN, + MT9M032_SHUTTER_WIDTH_MAX, 1, + MT9M032_SHUTTER_WIDTH_DEF); + + if (sensor->ctrls.error) { + ret = sensor->ctrls.error; + dev_err(&client->dev, "control initialization error %d\n", ret); + goto error_ctrl; + } + + v4l2_ctrl_cluster(2, &sensor->hflip); + + sensor->subdev.ctrl_handler = &sensor->ctrls; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad, 0); + if (ret < 0) + goto error_ctrl; + + ret = mt9m032_write(client, MT9M032_RESET, 1); /* reset on */ + if (ret < 0) + goto error_entity; + mt9m032_write(client, MT9M032_RESET, 0); /* reset off */ + if (ret < 0) + goto error_entity; + + ret = mt9m032_setup_pll(sensor); + if (ret < 0) + goto error_entity; + usleep_range(10000, 11000); + + ret = v4l2_ctrl_handler_setup(&sensor->ctrls); + if (ret < 0) + goto error_entity; + + /* SIZE */ + ret = mt9m032_update_geom_timing(sensor); + if (ret < 0) + goto error_entity; + + ret = mt9m032_write(client, 0x41, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x42, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x43, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x7f, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + if (sensor->pdata->invert_pixclock) { + ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL, + MT9M032_PIX_CLK_CTRL_INV_PIXCLK); + if (ret < 0) + goto error_entity; + } + + ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = update_formatter2(sensor, false); + if (ret < 0) + goto error_entity; + + return ret; + +error_entity: + media_entity_cleanup(&sensor->subdev.entity); +error_ctrl: + v4l2_ctrl_handler_free(&sensor->ctrls); +error_sensor: + mutex_destroy(&sensor->lock); + kfree(sensor); + return ret; +} + +static int mt9m032_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9m032 *sensor = to_mt9m032(subdev); + + v4l2_device_unregister_subdev(&sensor->subdev); + v4l2_ctrl_handler_free(&sensor->ctrls); + media_entity_cleanup(&sensor->subdev.entity); + mutex_destroy(&sensor->lock); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id mt9m032_id_table[] = { + { MT9M032_NAME, 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, mt9m032_id_table); + +static struct i2c_driver mt9m032_i2c_driver = { + .driver = { + .name = MT9M032_NAME, + }, + .probe = mt9m032_probe, + .remove = mt9m032_remove, + .id_table = mt9m032_id_table, +}; + +module_i2c_driver(mt9m032_i2c_driver); + +MODULE_AUTHOR("Martin Hostettler <martin@neutronstar.dyndns.org>"); +MODULE_DESCRIPTION("MT9M032 camera sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index bee65bff46e8..b0c529964329 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -1008,18 +1008,7 @@ static struct i2c_driver mt9m111_i2c_driver = { .id_table = mt9m111_id, }; -static int __init mt9m111_mod_init(void) -{ - return i2c_add_driver(&mt9m111_i2c_driver); -} - -static void __exit mt9m111_mod_exit(void) -{ - i2c_del_driver(&mt9m111_i2c_driver); -} - -module_init(mt9m111_mod_init); -module_exit(mt9m111_mod_exit); +module_i2c_driver(mt9m111_i2c_driver); MODULE_DESCRIPTION("Micron/Aptina MT9M111/MT9M112/MT9M131 Camera driver"); MODULE_AUTHOR("Robert Jarzmik"); diff --git a/drivers/media/video/mt9p031.c b/drivers/media/video/mt9p031.c index 93c3ec7426e8..c81eaf4fbe01 100644 --- a/drivers/media/video/mt9p031.c +++ b/drivers/media/video/mt9p031.c @@ -19,7 +19,6 @@ #include <linux/log2.h> #include <linux/pm.h> #include <linux/slab.h> -#include <media/v4l2-subdev.h> #include <linux/videodev2.h> #include <media/mt9p031.h> @@ -28,6 +27,8 @@ #include <media/v4l2-device.h> #include <media/v4l2-subdev.h> +#include "aptina-pll.h" + #define MT9P031_PIXEL_ARRAY_WIDTH 2752 #define MT9P031_PIXEL_ARRAY_HEIGHT 2004 @@ -98,14 +99,6 @@ #define MT9P031_TEST_PATTERN_RED 0xa2 #define MT9P031_TEST_PATTERN_BLUE 0xa3 -struct mt9p031_pll_divs { - u32 ext_freq; - u32 target_freq; - u8 m; - u8 n; - u8 p1; -}; - struct mt9p031 { struct v4l2_subdev subdev; struct media_pad pad; @@ -115,10 +108,8 @@ struct mt9p031 { struct mt9p031_platform_data *pdata; struct mutex power_lock; /* lock to protect power_count */ int power_count; - u16 xskip; - u16 yskip; - const struct mt9p031_pll_divs *pll; + struct aptina_pll pll; /* Registers cache */ u16 output_control; @@ -186,33 +177,31 @@ static int mt9p031_reset(struct mt9p031 *mt9p031) 0); } -/* - * This static table uses ext_freq and vdd_io values to select suitable - * PLL dividers m, n and p1 which have been calculated as specifiec in p36 - * of Aptina's mt9p031 datasheet. New values should be added here. - */ -static const struct mt9p031_pll_divs mt9p031_divs[] = { - /* ext_freq target_freq m n p1 */ - {21000000, 48000000, 26, 2, 6} -}; - -static int mt9p031_pll_get_divs(struct mt9p031 *mt9p031) +static int mt9p031_pll_setup(struct mt9p031 *mt9p031) { + static const struct aptina_pll_limits limits = { + .ext_clock_min = 6000000, + .ext_clock_max = 27000000, + .int_clock_min = 2000000, + .int_clock_max = 13500000, + .out_clock_min = 180000000, + .out_clock_max = 360000000, + .pix_clock_max = 96000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 1, + .p1_max = 128, + }; + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); - int i; + struct mt9p031_platform_data *pdata = mt9p031->pdata; - for (i = 0; i < ARRAY_SIZE(mt9p031_divs); i++) { - if (mt9p031_divs[i].ext_freq == mt9p031->pdata->ext_freq && - mt9p031_divs[i].target_freq == mt9p031->pdata->target_freq) { - mt9p031->pll = &mt9p031_divs[i]; - return 0; - } - } + mt9p031->pll.ext_clock = pdata->ext_freq; + mt9p031->pll.pix_clock = pdata->target_freq; - dev_err(&client->dev, "Couldn't find PLL dividers for ext_freq = %d, " - "target_freq = %d\n", mt9p031->pdata->ext_freq, - mt9p031->pdata->target_freq); - return -EINVAL; + return aptina_pll_calculate(&client->dev, &limits, &mt9p031->pll); } static int mt9p031_pll_enable(struct mt9p031 *mt9p031) @@ -226,11 +215,11 @@ static int mt9p031_pll_enable(struct mt9p031 *mt9p031) return ret; ret = mt9p031_write(client, MT9P031_PLL_CONFIG_1, - (mt9p031->pll->m << 8) | (mt9p031->pll->n - 1)); + (mt9p031->pll.m << 8) | (mt9p031->pll.n - 1)); if (ret < 0) return ret; - ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll->p1 - 1); + ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll.p1 - 1); if (ret < 0) return ret; @@ -785,8 +774,6 @@ static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) format->field = V4L2_FIELD_NONE; format->colorspace = V4L2_COLORSPACE_SRGB; - mt9p031->xskip = 1; - mt9p031->yskip = 1; return mt9p031_set_power(subdev, 1); } @@ -905,7 +892,7 @@ static int mt9p031_probe(struct i2c_client *client, mt9p031->format.field = V4L2_FIELD_NONE; mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB; - ret = mt9p031_pll_get_divs(mt9p031); + ret = mt9p031_pll_setup(mt9p031); done: if (ret < 0) { @@ -945,18 +932,7 @@ static struct i2c_driver mt9p031_i2c_driver = { .id_table = mt9p031_id, }; -static int __init mt9p031_mod_init(void) -{ - return i2c_add_driver(&mt9p031_i2c_driver); -} - -static void __exit mt9p031_mod_exit(void) -{ - i2c_del_driver(&mt9p031_i2c_driver); -} - -module_init(mt9p031_mod_init); -module_exit(mt9p031_mod_exit); +module_i2c_driver(mt9p031_i2c_driver); MODULE_DESCRIPTION("Aptina MT9P031 Camera driver"); MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); diff --git a/drivers/media/video/mt9t001.c b/drivers/media/video/mt9t001.c index cd81d04a529e..49ca3cbfc6f1 100644 --- a/drivers/media/video/mt9t001.c +++ b/drivers/media/video/mt9t001.c @@ -817,18 +817,7 @@ static struct i2c_driver mt9t001_driver = { .id_table = mt9t001_id, }; -static int __init mt9t001_init(void) -{ - return i2c_add_driver(&mt9t001_driver); -} - -static void __exit mt9t001_exit(void) -{ - i2c_del_driver(&mt9t001_driver); -} - -module_init(mt9t001_init); -module_exit(mt9t001_exit); +module_i2c_driver(mt9t001_driver); MODULE_DESCRIPTION("Aptina (Micron) MT9T001 Camera driver"); MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c index 84add1aef139..1415074138a5 100644 --- a/drivers/media/video/mt9t031.c +++ b/drivers/media/video/mt9t031.c @@ -850,18 +850,7 @@ static struct i2c_driver mt9t031_i2c_driver = { .id_table = mt9t031_id, }; -static int __init mt9t031_mod_init(void) -{ - return i2c_add_driver(&mt9t031_i2c_driver); -} - -static void __exit mt9t031_mod_exit(void) -{ - i2c_del_driver(&mt9t031_i2c_driver); -} - -module_init(mt9t031_mod_init); -module_exit(mt9t031_mod_exit); +module_i2c_driver(mt9t031_i2c_driver); MODULE_DESCRIPTION("Micron MT9T031 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>"); diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index 7b34b11daf24..8d1445f12708 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -1117,21 +1117,7 @@ static struct i2c_driver mt9t112_i2c_driver = { .id_table = mt9t112_id, }; -/************************************************************************ - module function -************************************************************************/ -static int __init mt9t112_module_init(void) -{ - return i2c_add_driver(&mt9t112_i2c_driver); -} - -static void __exit mt9t112_module_exit(void) -{ - i2c_del_driver(&mt9t112_i2c_driver); -} - -module_init(mt9t112_module_init); -module_exit(mt9t112_module_exit); +module_i2c_driver(mt9t112_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for mt9t112"); MODULE_AUTHOR("Kuninori Morimoto"); diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index db74dd27c722..6bf01ad62765 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -709,15 +709,4 @@ static struct i2c_driver mt9v011_driver = { .id_table = mt9v011_id, }; -static __init int init_mt9v011(void) -{ - return i2c_add_driver(&mt9v011_driver); -} - -static __exit void exit_mt9v011(void) -{ - i2c_del_driver(&mt9v011_driver); -} - -module_init(init_mt9v011); -module_exit(exit_mt9v011); +module_i2c_driver(mt9v011_driver); diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 944940758fa3..bf63417adb8f 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -872,18 +872,7 @@ static struct i2c_driver mt9v022_i2c_driver = { .id_table = mt9v022_id, }; -static int __init mt9v022_mod_init(void) -{ - return i2c_add_driver(&mt9v022_i2c_driver); -} - -static void __exit mt9v022_mod_exit(void) -{ - i2c_del_driver(&mt9v022_i2c_driver); -} - -module_init(mt9v022_mod_init); -module_exit(mt9v022_mod_exit); +module_i2c_driver(mt9v022_i2c_driver); MODULE_DESCRIPTION("Micron MT9V022 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c index d90b982cc218..75e253a343c5 100644 --- a/drivers/media/video/mt9v032.c +++ b/drivers/media/video/mt9v032.c @@ -756,18 +756,7 @@ static struct i2c_driver mt9v032_driver = { .id_table = mt9v032_id, }; -static int __init mt9v032_init(void) -{ - return i2c_add_driver(&mt9v032_driver); -} - -static void __exit mt9v032_exit(void) -{ - i2c_del_driver(&mt9v032_driver); -} - -module_init(mt9v032_init); -module_exit(mt9v032_exit); +module_i2c_driver(mt9v032_driver); MODULE_DESCRIPTION("Aptina MT9V032 Camera driver"); MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 04aab0c538aa..18afaeeadb7b 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008, Sascha Hauer, Pengutronix * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography + * Copyright (C) 2012, Javier Martin, Vista Silicon S.L. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,6 +19,7 @@ #include <linux/dma-mapping.h> #include <linux/errno.h> #include <linux/fs.h> +#include <linux/gcd.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -30,17 +32,14 @@ #include <media/v4l2-common.h> #include <media/v4l2-dev.h> -#include <media/videobuf-core.h> -#include <media/videobuf-dma-contig.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> #include <media/soc_camera.h> #include <media/soc_mediabus.h> #include <linux/videodev2.h> #include <mach/mx2_cam.h> -#ifdef CONFIG_MACH_MX27 -#include <mach/dma-mx1-mx2.h> -#endif #include <mach/hardware.h> #include <asm/dma.h> @@ -206,10 +205,23 @@ #define PRP_INTR_LBOVF (1 << 7) #define PRP_INTR_CH2OVF (1 << 8) -#define mx27_camera_emma(pcdev) (cpu_is_mx27() && pcdev->use_emma) +/* Resizing registers */ +#define PRP_RZ_VALID_TBL_LEN(x) ((x) << 24) +#define PRP_RZ_VALID_BILINEAR (1 << 31) #define MAX_VIDEO_MEM 16 +#define RESIZE_NUM_MIN 1 +#define RESIZE_NUM_MAX 20 +#define BC_COEF 3 +#define SZ_COEF (1 << BC_COEF) + +#define RESIZE_DIR_H 0 +#define RESIZE_DIR_V 1 + +#define RESIZE_ALGO_BILINEAR 0 +#define RESIZE_ALGO_AVERAGING 1 + struct mx2_prp_cfg { int channel; u32 in_fmt; @@ -219,6 +231,13 @@ struct mx2_prp_cfg { u32 irq_flags; }; +/* prp resizing parameters */ +struct emma_prp_resize { + int algo; /* type of algorithm used */ + int len; /* number of coefficients */ + unsigned char s[RESIZE_NUM_MAX]; /* table of coefficients */ +}; + /* prp configuration for a client-host fmt pair */ struct mx2_fmt_cfg { enum v4l2_mbus_pixelcode in_fmt; @@ -226,6 +245,26 @@ struct mx2_fmt_cfg { struct mx2_prp_cfg cfg; }; +enum mx2_buffer_state { + MX2_STATE_QUEUED, + MX2_STATE_ACTIVE, + MX2_STATE_DONE, +}; + +struct mx2_buf_internal { + struct list_head queue; + int bufnum; + bool discard; +}; + +/* buffer for one video frame */ +struct mx2_buffer { + /* common v4l buffer stuff -- must be first */ + struct vb2_buffer vb; + enum mx2_buffer_state state; + struct mx2_buf_internal internal; +}; + struct mx2_camera_dev { struct device *dev; struct soc_camera_host soc_host; @@ -242,6 +281,7 @@ struct mx2_camera_dev { struct list_head capture; struct list_head active_bufs; + struct list_head discard; spinlock_t lock; @@ -250,26 +290,23 @@ struct mx2_camera_dev { struct mx2_buffer *fb1_active; struct mx2_buffer *fb2_active; - int use_emma; - u32 csicr1; + struct mx2_buf_internal buf_discard[2]; void *discard_buffer; dma_addr_t discard_buffer_dma; size_t discard_size; struct mx2_fmt_cfg *emma_prp; + struct emma_prp_resize resizing[2]; + unsigned int s_width, s_height; u32 frame_count; + struct vb2_alloc_ctx *alloc_ctx; }; -/* buffer for one video frame */ -struct mx2_buffer { - /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - - enum v4l2_mbus_pixelcode code; - - int bufnum; -}; +static struct mx2_buffer *mx2_ibuf_to_buf(struct mx2_buf_internal *int_buf) +{ + return container_of(int_buf, struct mx2_buffer, internal); +} static struct mx2_fmt_cfg mx27_emma_prp_table[] = { /* @@ -324,13 +361,36 @@ static struct mx2_fmt_cfg *mx27_emma_prp_get_format( return &mx27_emma_prp_table[0]; }; +static void mx27_update_emma_buf(struct mx2_camera_dev *pcdev, + unsigned long phys, int bufnum) +{ + struct mx2_fmt_cfg *prp = pcdev->emma_prp; + + if (prp->cfg.channel == 1) { + writel(phys, pcdev->base_emma + + PRP_DEST_RGB1_PTR + 4 * bufnum); + } else { + writel(phys, pcdev->base_emma + + PRP_DEST_Y_PTR - 0x14 * bufnum); + if (prp->out_fmt == V4L2_PIX_FMT_YUV420) { + u32 imgsize = pcdev->icd->user_height * + pcdev->icd->user_width; + + writel(phys + imgsize, pcdev->base_emma + + PRP_DEST_CB_PTR - 0x14 * bufnum); + writel(phys + ((5 * imgsize) / 4), pcdev->base_emma + + PRP_DEST_CR_PTR - 0x14 * bufnum); + } + } +} + static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) { unsigned long flags; clk_disable(pcdev->clk_csi); writel(0, pcdev->base_csi + CSICR1); - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { writel(0, pcdev->base_emma + PRP_CNTL); } else if (cpu_is_mx25()) { spin_lock_irqsave(&pcdev->lock, flags); @@ -362,7 +422,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) csicr1 = CSICR1_MCLKEN; - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC | CSICR1_RXFF_LEVEL(0); } else if (cpu_is_mx27()) @@ -392,56 +452,13 @@ static void mx2_camera_remove_device(struct soc_camera_device *icd) mx2_camera_deactivate(pcdev); - if (pcdev->discard_buffer) { - dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size, - pcdev->discard_buffer, - pcdev->discard_buffer_dma); - pcdev->discard_buffer = NULL; - } - pcdev->icd = NULL; } -#ifdef CONFIG_MACH_MX27 -static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev) -{ - u32 tmp; - - imx_dma_enable(pcdev->dma); - - tmp = readl(pcdev->base_csi + CSICR1); - tmp |= CSICR1_RF_OR_INTEN; - writel(tmp, pcdev->base_csi + CSICR1); -} - -static irqreturn_t mx27_camera_irq(int irq_csi, void *data) -{ - struct mx2_camera_dev *pcdev = data; - u32 status = readl(pcdev->base_csi + CSISR); - - if (status & CSISR_SOF_INT && pcdev->active) { - u32 tmp; - - tmp = readl(pcdev->base_csi + CSICR1); - writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1); - mx27_camera_dma_enable(pcdev); - } - - writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR); - - return IRQ_HANDLED; -} -#else -static irqreturn_t mx27_camera_irq(int irq_csi, void *data) -{ - return IRQ_NONE; -} -#endif /* CONFIG_MACH_MX27 */ - static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, int state) { - struct videobuf_buffer *vb; + struct vb2_buffer *vb; struct mx2_buffer *buf; struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active : &pcdev->fb2_active; @@ -454,25 +471,24 @@ static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, goto out; vb = &(*fb_active)->vb; - dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); - vb->state = state; - do_gettimeofday(&vb->ts); - vb->field_count++; - - wake_up(&vb->done); + do_gettimeofday(&vb->v4l2_buf.timestamp); + vb->v4l2_buf.sequence++; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); if (list_empty(&pcdev->capture)) { buf = NULL; writel(0, pcdev->base_csi + fb_reg); } else { - buf = list_entry(pcdev->capture.next, struct mx2_buffer, - vb.queue); + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); vb = &buf->vb; - list_del(&vb->queue); - vb->state = VIDEOBUF_ACTIVE; - writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg); + list_del(&buf->internal.queue); + buf->state = MX2_STATE_ACTIVE; + writel(vb2_dma_contig_plane_dma_addr(vb, 0), + pcdev->base_csi + fb_reg); } *fb_active = buf; @@ -487,9 +503,9 @@ static irqreturn_t mx25_camera_irq(int irq_csi, void *data) u32 status = readl(pcdev->base_csi + CSISR); if (status & CSISR_DMA_TSF_FB1_INT) - mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE); + mx25_camera_frame_done(pcdev, 1, MX2_STATE_DONE); else if (status & CSISR_DMA_TSF_FB2_INT) - mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE); + mx25_camera_frame_done(pcdev, 2, MX2_STATE_DONE); /* FIXME: handle CSISR_RFF_OR_INT */ @@ -501,59 +517,50 @@ static irqreturn_t mx25_camera_irq(int irq_csi, void *data) /* * Videobuf operations */ -static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) +static int mx2_videobuf_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *count, unsigned int *num_planes, + unsigned int sizes[], void *alloc_ctxs[]) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct mx2_camera_dev *pcdev = ici->priv; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size); + dev_dbg(icd->parent, "count=%d, size=%d\n", *count, sizes[0]); + + /* TODO: support for VIDIOC_CREATE_BUFS not ready */ + if (fmt != NULL) + return -ENOTTY; if (bytes_per_line < 0) return bytes_per_line; - *size = bytes_per_line * icd->user_height; + alloc_ctxs[0] = pcdev->alloc_ctx; + + sizes[0] = bytes_per_line * icd->user_height; if (0 == *count) *count = 32; - if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) - *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size; + if (!*num_planes && + sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024) + *count = (MAX_VIDEO_MEM * 1024 * 1024) / sizes[0]; - return 0; -} + *num_planes = 1; -static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf) -{ - struct soc_camera_device *icd = vq->priv_data; - struct videobuf_buffer *vb = &buf->vb; - - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); - - /* - * This waits until this buffer is out of danger, i.e., until it is no - * longer in state VIDEOBUF_QUEUED or VIDEOBUF_ACTIVE - */ - videobuf_waiton(vq, vb, 0, 0); - - videobuf_dma_contig_free(vq, vb); - dev_dbg(icd->parent, "%s freed\n", __func__); - - vb->state = VIDEOBUF_NEEDS_INIT; + return 0; } -static int mx2_videobuf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, enum v4l2_field field) +static int mx2_videobuf_prepare(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; - struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); int ret = 0; - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); if (bytes_per_line < 0) return bytes_per_line; @@ -563,99 +570,58 @@ static int mx2_videobuf_prepare(struct videobuf_queue *vq, * This can be useful if you want to see if we actually fill * the buffer with something */ - memset((void *)vb->baddr, 0xaa, vb->bsize); + memset((void *)vb2_plane_vaddr(vb, 0), + 0xaa, vb2_get_plane_payload(vb, 0)); #endif - if (buf->code != icd->current_fmt->code || - vb->width != icd->user_width || - vb->height != icd->user_height || - vb->field != field) { - buf->code = icd->current_fmt->code; - vb->width = icd->user_width; - vb->height = icd->user_height; - vb->field = field; - vb->state = VIDEOBUF_NEEDS_INIT; - } - - vb->size = bytes_per_line * vb->height; - if (vb->baddr && vb->bsize < vb->size) { + vb2_set_plane_payload(vb, 0, bytes_per_line * icd->user_height); + if (vb2_plane_vaddr(vb, 0) && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) { ret = -EINVAL; goto out; } - if (vb->state == VIDEOBUF_NEEDS_INIT) { - ret = videobuf_iolock(vq, vb, NULL); - if (ret) - goto fail; - - vb->state = VIDEOBUF_PREPARED; - } - return 0; -fail: - free_buffer(vq, buf); out: return ret; } -static void mx2_videobuf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void mx2_videobuf_queue(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); unsigned long flags; - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); spin_lock_irqsave(&pcdev->lock, flags); - vb->state = VIDEOBUF_QUEUED; - list_add_tail(&vb->queue, &pcdev->capture); + buf->state = MX2_STATE_QUEUED; + list_add_tail(&buf->internal.queue, &pcdev->capture); - if (mx27_camera_emma(pcdev)) { - goto out; -#ifdef CONFIG_MACH_MX27 - } else if (cpu_is_mx27()) { - int ret; - - if (pcdev->active == NULL) { - ret = imx_dma_setup_single(pcdev->dma, - videobuf_to_dma_contig(vb), vb->size, - (u32)pcdev->base_dma + 0x10, - DMA_MODE_READ); - if (ret) { - vb->state = VIDEOBUF_ERROR; - wake_up(&vb->done); - goto out; - } - - vb->state = VIDEOBUF_ACTIVE; - pcdev->active = buf; - } -#endif - } else { /* cpu_is_mx25() */ + if (cpu_is_mx25()) { u32 csicr3, dma_inten = 0; if (pcdev->fb1_active == NULL) { - writel(videobuf_to_dma_contig(vb), + writel(vb2_dma_contig_plane_dma_addr(vb, 0), pcdev->base_csi + CSIDMASA_FB1); pcdev->fb1_active = buf; dma_inten = CSICR1_FB1_DMA_INTEN; } else if (pcdev->fb2_active == NULL) { - writel(videobuf_to_dma_contig(vb), + writel(vb2_dma_contig_plane_dma_addr(vb, 0), pcdev->base_csi + CSIDMASA_FB2); pcdev->fb2_active = buf; dma_inten = CSICR1_FB2_DMA_INTEN; } if (dma_inten) { - list_del(&vb->queue); - vb->state = VIDEOBUF_ACTIVE; + list_del(&buf->internal.queue); + buf->state = MX2_STATE_ACTIVE; csicr3 = readl(pcdev->base_csi + CSICR3); @@ -674,36 +640,31 @@ static void mx2_videobuf_queue(struct videobuf_queue *vq, } } -out: spin_unlock_irqrestore(&pcdev->lock, flags); } -static void mx2_videobuf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void mx2_videobuf_release(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); unsigned long flags; #ifdef DEBUG - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); - switch (vb->state) { - case VIDEOBUF_ACTIVE: + switch (buf->state) { + case MX2_STATE_ACTIVE: dev_info(icd->parent, "%s (active)\n", __func__); break; - case VIDEOBUF_QUEUED: + case MX2_STATE_QUEUED: dev_info(icd->parent, "%s (queued)\n", __func__); break; - case VIDEOBUF_PREPARED: - dev_info(icd->parent, "%s (prepared)\n", __func__); - break; default: dev_info(icd->parent, "%s (unknown) %d\n", __func__, - vb->state); + buf->state); break; } #endif @@ -717,11 +678,9 @@ static void mx2_videobuf_release(struct videobuf_queue *vq, * state. This requires a specific handling for each of the these DMA * types. */ + spin_lock_irqsave(&pcdev->lock, flags); - if (vb->state == VIDEOBUF_QUEUED) { - list_del(&vb->queue); - vb->state = VIDEOBUF_ERROR; - } else if (cpu_is_mx25() && vb->state == VIDEOBUF_ACTIVE) { + if (cpu_is_mx25() && buf->state == MX2_STATE_ACTIVE) { if (pcdev->fb1_active == buf) { pcdev->csicr1 &= ~CSICR1_FB1_DMA_INTEN; writel(0, pcdev->base_csi + CSIDMASA_FB1); @@ -732,75 +691,178 @@ static void mx2_videobuf_release(struct videobuf_queue *vq, pcdev->fb2_active = NULL; } writel(pcdev->csicr1, pcdev->base_csi + CSICR1); - vb->state = VIDEOBUF_ERROR; } spin_unlock_irqrestore(&pcdev->lock, flags); - - free_buffer(vq, buf); } -static struct videobuf_queue_ops mx2_videobuf_ops = { - .buf_setup = mx2_videobuf_setup, - .buf_prepare = mx2_videobuf_prepare, - .buf_queue = mx2_videobuf_queue, - .buf_release = mx2_videobuf_release, -}; - -static void mx2_camera_init_videobuf(struct videobuf_queue *q, - struct soc_camera_device *icd) +static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, + int bytesperline) { - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct soc_camera_host *ici = + to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; + struct mx2_fmt_cfg *prp = pcdev->emma_prp; - videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev, - &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_NONE, sizeof(struct mx2_buffer), - icd, &icd->video_lock); -} + writel((pcdev->s_width << 16) | pcdev->s_height, + pcdev->base_emma + PRP_SRC_FRAME_SIZE); + writel(prp->cfg.src_pixel, + pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); + if (prp->cfg.channel == 1) { + writel((icd->user_width << 16) | icd->user_height, + pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE); + writel(bytesperline, + pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE); + writel(prp->cfg.ch1_pixel, + pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL); + } else { /* channel 2 */ + writel((icd->user_width << 16) | icd->user_height, + pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); + } -#define MX2_BUS_FLAGS (V4L2_MBUS_MASTER | \ - V4L2_MBUS_VSYNC_ACTIVE_HIGH | \ - V4L2_MBUS_VSYNC_ACTIVE_LOW | \ - V4L2_MBUS_HSYNC_ACTIVE_HIGH | \ - V4L2_MBUS_HSYNC_ACTIVE_LOW | \ - V4L2_MBUS_PCLK_SAMPLE_RISING | \ - V4L2_MBUS_PCLK_SAMPLE_FALLING | \ - V4L2_MBUS_DATA_ACTIVE_HIGH | \ - V4L2_MBUS_DATA_ACTIVE_LOW) + /* Enable interrupts */ + writel(prp->cfg.irq_flags, pcdev->base_emma + PRP_INTR_CNTL); +} -static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev) +static void mx2_prp_resize_commit(struct mx2_camera_dev *pcdev) { - u32 cntl; - int count = 0; + int dir; - cntl = readl(pcdev->base_emma + PRP_CNTL); - writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); - while (count++ < 100) { - if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)) - return 0; - barrier(); - udelay(1); - } + for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) { + unsigned char *s = pcdev->resizing[dir].s; + int len = pcdev->resizing[dir].len; + unsigned int coeff[2] = {0, 0}; + unsigned int valid = 0; + int i; - return -ETIMEDOUT; + if (len == 0) + continue; + + for (i = RESIZE_NUM_MAX - 1; i >= 0; i--) { + int j; + + j = i > 9 ? 1 : 0; + coeff[j] = (coeff[j] << BC_COEF) | + (s[i] & (SZ_COEF - 1)); + + if (i == 5 || i == 15) + coeff[j] <<= 1; + + valid = (valid << 1) | (s[i] >> BC_COEF); + } + + valid |= PRP_RZ_VALID_TBL_LEN(len); + + if (pcdev->resizing[dir].algo == RESIZE_ALGO_BILINEAR) + valid |= PRP_RZ_VALID_BILINEAR; + + if (pcdev->emma_prp->cfg.channel == 1) { + if (dir == RESIZE_DIR_H) { + writel(coeff[0], pcdev->base_emma + + PRP_CH1_RZ_HORI_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH1_RZ_HORI_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH1_RZ_HORI_VALID); + } else { + writel(coeff[0], pcdev->base_emma + + PRP_CH1_RZ_VERT_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH1_RZ_VERT_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH1_RZ_VERT_VALID); + } + } else { + if (dir == RESIZE_DIR_H) { + writel(coeff[0], pcdev->base_emma + + PRP_CH2_RZ_HORI_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH2_RZ_HORI_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH2_RZ_HORI_VALID); + } else { + writel(coeff[0], pcdev->base_emma + + PRP_CH2_RZ_VERT_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH2_RZ_VERT_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH2_RZ_VERT_VALID); + } + } + } } -static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, - int bytesperline) +static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) { + struct soc_camera_device *icd = soc_camera_from_vb2q(q); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_fmt_cfg *prp = pcdev->emma_prp; - u32 imgsize = pcdev->icd->user_height * pcdev->icd->user_width; + struct vb2_buffer *vb; + struct mx2_buffer *buf; + unsigned long phys; + int bytesperline; - if (prp->cfg.channel == 1) { - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_DEST_RGB1_PTR); - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_DEST_RGB2_PTR); + if (cpu_is_mx27()) { + unsigned long flags; + if (count < 2) + return -EINVAL; + + spin_lock_irqsave(&pcdev->lock, flags); + + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); + buf->internal.bufnum = 0; + vb = &buf->vb; + buf->state = MX2_STATE_ACTIVE; + + phys = vb2_dma_contig_plane_dma_addr(vb, 0); + mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum); + list_move_tail(pcdev->capture.next, &pcdev->active_bufs); + + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); + buf->internal.bufnum = 1; + vb = &buf->vb; + buf->state = MX2_STATE_ACTIVE; - writel(PRP_CNTL_CH1EN | + phys = vb2_dma_contig_plane_dma_addr(vb, 0); + mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum); + list_move_tail(pcdev->capture.next, &pcdev->active_bufs); + + bytesperline = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + if (bytesperline < 0) + return bytesperline; + + /* + * I didn't manage to properly enable/disable the prp + * on a per frame basis during running transfers, + * thus we allocate a buffer here and use it to + * discard frames when no buffer is available. + * Feel free to work on this ;) + */ + pcdev->discard_size = icd->user_height * bytesperline; + pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, + pcdev->discard_size, &pcdev->discard_buffer_dma, + GFP_KERNEL); + if (!pcdev->discard_buffer) + return -ENOMEM; + + pcdev->buf_discard[0].discard = true; + list_add_tail(&pcdev->buf_discard[0].queue, + &pcdev->discard); + + pcdev->buf_discard[1].discard = true; + list_add_tail(&pcdev->buf_discard[1].queue, + &pcdev->discard); + + mx2_prp_resize_commit(pcdev); + + mx27_camera_emma_buf_init(icd, bytesperline); + + if (prp->cfg.channel == 1) { + writel(PRP_CNTL_CH1EN | PRP_CNTL_CSIEN | prp->cfg.in_fmt | prp->cfg.out_fmt | @@ -809,56 +871,107 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, PRP_CNTL_CH1_TSKIP(0) | PRP_CNTL_IN_TSKIP(0), pcdev->base_emma + PRP_CNTL); + } else { + writel(PRP_CNTL_CH2EN | + PRP_CNTL_CSIEN | + prp->cfg.in_fmt | + prp->cfg.out_fmt | + PRP_CNTL_CH2_LEN | + PRP_CNTL_CH2_TSKIP(0) | + PRP_CNTL_IN_TSKIP(0), + pcdev->base_emma + PRP_CNTL); + } + spin_unlock_irqrestore(&pcdev->lock, flags); + } - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_SRC_FRAME_SIZE); - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE); - writel(bytesperline, - pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE); - writel(prp->cfg.src_pixel, - pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); - writel(prp->cfg.ch1_pixel, - pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL); - } else { /* channel 2 */ - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_DEST_Y_PTR); - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_SOURCE_Y_PTR); - - if (prp->cfg.out_fmt == PRP_CNTL_CH2_OUT_YUV420) { - writel(pcdev->discard_buffer_dma + imgsize, - pcdev->base_emma + PRP_DEST_CB_PTR); - writel(pcdev->discard_buffer_dma + ((5 * imgsize) / 4), - pcdev->base_emma + PRP_DEST_CR_PTR); - writel(pcdev->discard_buffer_dma + imgsize, - pcdev->base_emma + PRP_SOURCE_CB_PTR); - writel(pcdev->discard_buffer_dma + ((5 * imgsize) / 4), - pcdev->base_emma + PRP_SOURCE_CR_PTR); + return 0; +} + +static int mx2_stop_streaming(struct vb2_queue *q) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(q); + struct soc_camera_host *ici = + to_soc_camera_host(icd->parent); + struct mx2_camera_dev *pcdev = ici->priv; + struct mx2_fmt_cfg *prp = pcdev->emma_prp; + unsigned long flags; + void *b; + u32 cntl; + + if (cpu_is_mx27()) { + spin_lock_irqsave(&pcdev->lock, flags); + + cntl = readl(pcdev->base_emma + PRP_CNTL); + if (prp->cfg.channel == 1) { + writel(cntl & ~PRP_CNTL_CH1EN, + pcdev->base_emma + PRP_CNTL); + } else { + writel(cntl & ~PRP_CNTL_CH2EN, + pcdev->base_emma + PRP_CNTL); } + INIT_LIST_HEAD(&pcdev->capture); + INIT_LIST_HEAD(&pcdev->active_bufs); + INIT_LIST_HEAD(&pcdev->discard); - writel(PRP_CNTL_CH2EN | - PRP_CNTL_CSIEN | - prp->cfg.in_fmt | - prp->cfg.out_fmt | - PRP_CNTL_CH2_LEN | - PRP_CNTL_CH2_TSKIP(0) | - PRP_CNTL_IN_TSKIP(0), - pcdev->base_emma + PRP_CNTL); + b = pcdev->discard_buffer; + pcdev->discard_buffer = NULL; - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_SRC_FRAME_SIZE); + spin_unlock_irqrestore(&pcdev->lock, flags); - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); + dma_free_coherent(ici->v4l2_dev.dev, + pcdev->discard_size, b, pcdev->discard_buffer_dma); + } - writel(prp->cfg.src_pixel, - pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); + return 0; +} + +static struct vb2_ops mx2_videobuf_ops = { + .queue_setup = mx2_videobuf_setup, + .buf_prepare = mx2_videobuf_prepare, + .buf_queue = mx2_videobuf_queue, + .buf_cleanup = mx2_videobuf_release, + .start_streaming = mx2_start_streaming, + .stop_streaming = mx2_stop_streaming, +}; + +static int mx2_camera_init_videobuf(struct vb2_queue *q, + struct soc_camera_device *icd) +{ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = icd; + q->ops = &mx2_videobuf_ops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct mx2_buffer); + + return vb2_queue_init(q); +} +#define MX2_BUS_FLAGS (V4L2_MBUS_MASTER | \ + V4L2_MBUS_VSYNC_ACTIVE_HIGH | \ + V4L2_MBUS_VSYNC_ACTIVE_LOW | \ + V4L2_MBUS_HSYNC_ACTIVE_HIGH | \ + V4L2_MBUS_HSYNC_ACTIVE_LOW | \ + V4L2_MBUS_PCLK_SAMPLE_RISING | \ + V4L2_MBUS_PCLK_SAMPLE_FALLING | \ + V4L2_MBUS_DATA_ACTIVE_HIGH | \ + V4L2_MBUS_DATA_ACTIVE_LOW) + +static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev) +{ + u32 cntl; + int count = 0; + + cntl = readl(pcdev->base_emma + PRP_CNTL); + writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); + while (count++ < 100) { + if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)) + return 0; + barrier(); + udelay(1); } - /* Enable interrupts */ - writel(prp->cfg.irq_flags, pcdev->base_emma + PRP_INTR_CNTL); + return -ETIMEDOUT; } static int mx2_camera_set_bus_param(struct soc_camera_device *icd) @@ -939,31 +1052,10 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd) if (bytesperline < 0) return bytesperline; - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { ret = mx27_camera_emma_prp_reset(pcdev); if (ret) return ret; - - if (pcdev->discard_buffer) - dma_free_coherent(ici->v4l2_dev.dev, - pcdev->discard_size, pcdev->discard_buffer, - pcdev->discard_buffer_dma); - - /* - * I didn't manage to properly enable/disable the prp - * on a per frame basis during running transfers, - * thus we allocate a buffer here and use it to - * discard frames when no buffer is available. - * Feel free to work on this ;) - */ - pcdev->discard_size = icd->user_height * bytesperline; - pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, - pcdev->discard_size, &pcdev->discard_buffer_dma, - GFP_KERNEL); - if (!pcdev->discard_buffer) - return -ENOMEM; - - mx27_camera_emma_buf_init(icd, bytesperline); } else if (cpu_is_mx25()) { writel((bytesperline * icd->user_height) >> 2, pcdev->base_csi + CSIRXCNT); @@ -1052,6 +1144,123 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd, return formats; } +static int mx2_emmaprp_resize(struct mx2_camera_dev *pcdev, + struct v4l2_mbus_framefmt *mf_in, + struct v4l2_pix_format *pix_out, bool apply) +{ + int num, den; + unsigned long m; + int i, dir; + + for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) { + struct emma_prp_resize tmprsz; + unsigned char *s = tmprsz.s; + int len = 0; + int in, out; + + if (dir == RESIZE_DIR_H) { + in = mf_in->width; + out = pix_out->width; + } else { + in = mf_in->height; + out = pix_out->height; + } + + if (in < out) + return -EINVAL; + else if (in == out) + continue; + + /* Calculate ratio */ + m = gcd(in, out); + num = in / m; + den = out / m; + if (num > RESIZE_NUM_MAX) + return -EINVAL; + + if ((num >= 2 * den) && (den == 1) && + (num < 9) && (!(num & 0x01))) { + int sum = 0; + int j; + + /* Average scaling for >= 2:1 ratios */ + /* Support can be added for num >=9 and odd values */ + + tmprsz.algo = RESIZE_ALGO_AVERAGING; + len = num; + + for (i = 0; i < (len / 2); i++) + s[i] = 8; + + do { + for (i = 0; i < (len / 2); i++) { + s[i] = s[i] >> 1; + sum = 0; + for (j = 0; j < (len / 2); j++) + sum += s[j]; + if (sum == 4) + break; + } + } while (sum != 4); + + for (i = (len / 2); i < len; i++) + s[i] = s[len - i - 1]; + + s[len - 1] |= SZ_COEF; + } else { + /* bilinear scaling for < 2:1 ratios */ + int v; /* overflow counter */ + int coeff, nxt; /* table output */ + int in_pos_inc = 2 * den; + int out_pos = num; + int out_pos_inc = 2 * num; + int init_carry = num - den; + int carry = init_carry; + + tmprsz.algo = RESIZE_ALGO_BILINEAR; + v = den + in_pos_inc; + do { + coeff = v - out_pos; + out_pos += out_pos_inc; + carry += out_pos_inc; + for (nxt = 0; v < out_pos; nxt++) { + v += in_pos_inc; + carry -= in_pos_inc; + } + + if (len > RESIZE_NUM_MAX) + return -EINVAL; + + coeff = ((coeff << BC_COEF) + + (in_pos_inc >> 1)) / in_pos_inc; + + if (coeff >= (SZ_COEF - 1)) + coeff--; + + coeff |= SZ_COEF; + s[len] = (unsigned char)coeff; + len++; + + for (i = 1; i < nxt; i++) { + if (len >= RESIZE_NUM_MAX) + return -EINVAL; + s[len] = 0; + len++; + } + } while (carry != init_carry); + } + tmprsz.len = len; + if (dir == RESIZE_DIR_H) + mf_in->width = pix_out->width; + else + mf_in->height = pix_out->height; + + if (apply) + memcpy(&pcdev->resizing[dir], &tmprsz, sizeof(tmprsz)); + } + return 0; +} + static int mx2_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { @@ -1063,6 +1272,9 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_mbus_framefmt mf; int ret; + dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n", + __func__, pix->width, pix->height); + xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); if (!xlate) { dev_warn(icd->parent, "Format %x not found\n", @@ -1080,6 +1292,22 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, if (ret < 0 && ret != -ENOIOCTLCMD) return ret; + /* Store width and height returned by the sensor for resizing */ + pcdev->s_width = mf.width; + pcdev->s_height = mf.height; + dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n", + __func__, pcdev->s_width, pcdev->s_height); + + pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, + xlate->host_fmt->fourcc); + + memset(pcdev->resizing, 0, sizeof(pcdev->resizing)); + if ((mf.width != pix->width || mf.height != pix->height) && + pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) { + if (mx2_emmaprp_resize(pcdev, &mf, pix, true) < 0) + dev_dbg(icd->parent, "%s: can't resize\n", __func__); + } + if (mf.code != xlate->code) return -EINVAL; @@ -1089,9 +1317,8 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, pix->colorspace = mf.colorspace; icd->current_fmt = xlate; - if (mx27_camera_emma(pcdev)) - pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, - xlate->host_fmt->fourcc); + dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n", + __func__, pix->width, pix->height); return 0; } @@ -1104,9 +1331,14 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_mbus_framefmt mf; __u32 pixfmt = pix->pixelformat; + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct mx2_camera_dev *pcdev = ici->priv; unsigned int width_limit; int ret; + dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n", + __func__, pix->width, pix->height); + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (pixfmt && !xlate) { dev_warn(icd->parent, "Format %x not found\n", pixfmt); @@ -1156,6 +1388,20 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, if (ret < 0) return ret; + dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n", + __func__, pcdev->s_width, pcdev->s_height); + + /* If the sensor does not support image size try PrP resizing */ + pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, + xlate->host_fmt->fourcc); + + memset(pcdev->resizing, 0, sizeof(pcdev->resizing)); + if ((mf.width != pix->width || mf.height != pix->height) && + pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) { + if (mx2_emmaprp_resize(pcdev, &mf, pix, false) < 0) + dev_dbg(icd->parent, "%s: can't resize\n", __func__); + } + if (mf.field == V4L2_FIELD_ANY) mf.field = V4L2_FIELD_NONE; /* @@ -1174,6 +1420,9 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, pix->field = mf.field; pix->colorspace = mf.colorspace; + dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n", + __func__, pix->width, pix->height); + return 0; } @@ -1187,136 +1436,11 @@ static int mx2_camera_querycap(struct soc_camera_host *ici, return 0; } -static int mx2_camera_reqbufs(struct soc_camera_device *icd, - struct v4l2_requestbuffers *p) -{ - int i; - - for (i = 0; i < p->count; i++) { - struct mx2_buffer *buf = container_of(icd->vb_vidq.bufs[i], - struct mx2_buffer, vb); - INIT_LIST_HEAD(&buf->vb.queue); - } - - return 0; -} - -#ifdef CONFIG_MACH_MX27 -static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state) -{ - struct videobuf_buffer *vb; - struct mx2_buffer *buf; - unsigned long flags; - int ret; - - spin_lock_irqsave(&pcdev->lock, flags); - - if (!pcdev->active) { - dev_err(pcdev->dev, "%s called with no active buffer!\n", - __func__); - goto out; - } - - vb = &pcdev->active->vb; - buf = container_of(vb, struct mx2_buffer, vb); - WARN_ON(list_empty(&vb->queue)); - dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); - - /* _init is used to debug races, see comment in pxa_camera_reqbufs() */ - list_del_init(&vb->queue); - vb->state = state; - do_gettimeofday(&vb->ts); - vb->field_count++; - - wake_up(&vb->done); - - if (list_empty(&pcdev->capture)) { - pcdev->active = NULL; - goto out; - } - - pcdev->active = list_entry(pcdev->capture.next, - struct mx2_buffer, vb.queue); - - vb = &pcdev->active->vb; - vb->state = VIDEOBUF_ACTIVE; - - ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb), - vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ); - - if (ret) { - vb->state = VIDEOBUF_ERROR; - pcdev->active = NULL; - wake_up(&vb->done); - } - -out: - spin_unlock_irqrestore(&pcdev->lock, flags); -} - -static void mx27_camera_dma_err_callback(int channel, void *data, int err) -{ - struct mx2_camera_dev *pcdev = data; - - mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR); -} - -static void mx27_camera_dma_callback(int channel, void *data) -{ - struct mx2_camera_dev *pcdev = data; - - mx27_camera_frame_done(pcdev, VIDEOBUF_DONE); -} - -#define DMA_REQ_CSI_RX 31 /* FIXME: Add this to a resource */ - -static int __devinit mx27_camera_dma_init(struct platform_device *pdev, - struct mx2_camera_dev *pcdev) -{ - int err; - - pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH); - if (pcdev->dma < 0) { - dev_err(&pdev->dev, "%s failed to request DMA channel\n", - __func__); - return pcdev->dma; - } - - err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback, - mx27_camera_dma_err_callback, pcdev); - if (err) { - dev_err(&pdev->dev, "%s failed to set DMA callback\n", - __func__); - goto err_out; - } - - err = imx_dma_config_channel(pcdev->dma, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, - DMA_REQ_CSI_RX, 1); - if (err) { - dev_err(&pdev->dev, "%s failed to config DMA channel\n", - __func__); - goto err_out; - } - - imx_dma_config_burstlen(pcdev->dma, 64); - - return 0; - -err_out: - imx_dma_free(pcdev->dma); - - return err; -} -#endif /* CONFIG_MACH_MX27 */ - static unsigned int mx2_camera_poll(struct file *file, poll_table *pt) { struct soc_camera_device *icd = file->private_data; - return videobuf_poll_stream(file, &icd->vb_vidq, pt); + return vb2_poll(&icd->vb2_vidq, file, pt); } static struct soc_camera_host_ops mx2_soc_camera_host_ops = { @@ -1327,144 +1451,148 @@ static struct soc_camera_host_ops mx2_soc_camera_host_ops = { .set_crop = mx2_camera_set_crop, .get_formats = mx2_camera_get_formats, .try_fmt = mx2_camera_try_fmt, - .init_videobuf = mx2_camera_init_videobuf, - .reqbufs = mx2_camera_reqbufs, + .init_videobuf2 = mx2_camera_init_videobuf, .poll = mx2_camera_poll, .querycap = mx2_camera_querycap, .set_bus_param = mx2_camera_set_bus_param, }; static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev, - int bufnum, int state) + int bufnum, bool err) { - u32 imgsize = pcdev->icd->user_height * pcdev->icd->user_width; +#ifdef DEBUG struct mx2_fmt_cfg *prp = pcdev->emma_prp; +#endif + struct mx2_buf_internal *ibuf; struct mx2_buffer *buf; - struct videobuf_buffer *vb; + struct vb2_buffer *vb; unsigned long phys; - if (!list_empty(&pcdev->active_bufs)) { - buf = list_entry(pcdev->active_bufs.next, - struct mx2_buffer, vb.queue); + ibuf = list_first_entry(&pcdev->active_bufs, struct mx2_buf_internal, + queue); + + BUG_ON(ibuf->bufnum != bufnum); - BUG_ON(buf->bufnum != bufnum); + if (ibuf->discard) { + /* + * Discard buffer must not be returned to user space. + * Just return it to the discard queue. + */ + list_move_tail(pcdev->active_bufs.next, &pcdev->discard); + } else { + buf = mx2_ibuf_to_buf(ibuf); vb = &buf->vb; #ifdef DEBUG - phys = videobuf_to_dma_contig(vb); + phys = vb2_dma_contig_plane_dma_addr(vb, 0); if (prp->cfg.channel == 1) { if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum) != phys) { - dev_err(pcdev->dev, "%p != %p\n", phys, - readl(pcdev->base_emma + - PRP_DEST_RGB1_PTR + - 4 * bufnum)); + dev_err(pcdev->dev, "%lx != %x\n", phys, + readl(pcdev->base_emma + + PRP_DEST_RGB1_PTR + 4 * bufnum)); } } else { if (readl(pcdev->base_emma + PRP_DEST_Y_PTR - 0x14 * bufnum) != phys) { - dev_err(pcdev->dev, "%p != %p\n", phys, - readl(pcdev->base_emma + - PRP_DEST_Y_PTR - - 0x14 * bufnum)); + dev_err(pcdev->dev, "%lx != %x\n", phys, + readl(pcdev->base_emma + + PRP_DEST_Y_PTR - 0x14 * bufnum)); } } #endif - dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, - vb->baddr, vb->bsize); + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%p %lu\n", __func__, vb, + vb2_plane_vaddr(vb, 0), + vb2_get_plane_payload(vb, 0)); - list_del(&vb->queue); - vb->state = state; - do_gettimeofday(&vb->ts); - vb->field_count = pcdev->frame_count * 2; - pcdev->frame_count++; - - wake_up(&vb->done); + list_del_init(&buf->internal.queue); + do_gettimeofday(&vb->v4l2_buf.timestamp); + vb->v4l2_buf.sequence = pcdev->frame_count; + if (err) + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); + else + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); } + pcdev->frame_count++; + if (list_empty(&pcdev->capture)) { - if (prp->cfg.channel == 1) { - writel(pcdev->discard_buffer_dma, pcdev->base_emma + - PRP_DEST_RGB1_PTR + 4 * bufnum); - } else { - writel(pcdev->discard_buffer_dma, pcdev->base_emma + - PRP_DEST_Y_PTR - - 0x14 * bufnum); - if (prp->out_fmt == V4L2_PIX_FMT_YUV420) { - writel(pcdev->discard_buffer_dma + imgsize, - pcdev->base_emma + PRP_DEST_CB_PTR - - 0x14 * bufnum); - writel(pcdev->discard_buffer_dma + - ((5 * imgsize) / 4), pcdev->base_emma + - PRP_DEST_CR_PTR - 0x14 * bufnum); - } + if (list_empty(&pcdev->discard)) { + dev_warn(pcdev->dev, "%s: trying to access empty discard list\n", + __func__); + return; } + + ibuf = list_first_entry(&pcdev->discard, + struct mx2_buf_internal, queue); + ibuf->bufnum = bufnum; + + list_move_tail(pcdev->discard.next, &pcdev->active_bufs); + mx27_update_emma_buf(pcdev, pcdev->discard_buffer_dma, bufnum); return; } - buf = list_entry(pcdev->capture.next, - struct mx2_buffer, vb.queue); + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); - buf->bufnum = !bufnum; + buf->internal.bufnum = bufnum; list_move_tail(pcdev->capture.next, &pcdev->active_bufs); vb = &buf->vb; - vb->state = VIDEOBUF_ACTIVE; + buf->state = MX2_STATE_ACTIVE; - phys = videobuf_to_dma_contig(vb); - if (prp->cfg.channel == 1) { - writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum); - } else { - writel(phys, pcdev->base_emma + - PRP_DEST_Y_PTR - 0x14 * bufnum); - if (prp->cfg.out_fmt == PRP_CNTL_CH2_OUT_YUV420) { - writel(phys + imgsize, pcdev->base_emma + - PRP_DEST_CB_PTR - 0x14 * bufnum); - writel(phys + ((5 * imgsize) / 4), pcdev->base_emma + - PRP_DEST_CR_PTR - 0x14 * bufnum); - } - } + phys = vb2_dma_contig_plane_dma_addr(vb, 0); + mx27_update_emma_buf(pcdev, phys, bufnum); } static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data) { struct mx2_camera_dev *pcdev = data; unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS); - struct mx2_buffer *buf; + struct mx2_buf_internal *ibuf; + + spin_lock(&pcdev->lock); + + if (list_empty(&pcdev->active_bufs)) { + dev_warn(pcdev->dev, "%s: called while active list is empty\n", + __func__); + + if (!status) { + spin_unlock(&pcdev->lock); + return IRQ_NONE; + } + } if (status & (1 << 7)) { /* overflow */ - u32 cntl; - /* - * We only disable channel 1 here since this is the only - * enabled channel - * - * FIXME: the correct DMA overflow handling should be resetting - * the buffer, returning an error frame, and continuing with - * the next one. - */ - cntl = readl(pcdev->base_emma + PRP_CNTL); + u32 cntl = readl(pcdev->base_emma + PRP_CNTL); writel(cntl & ~(PRP_CNTL_CH1EN | PRP_CNTL_CH2EN), pcdev->base_emma + PRP_CNTL); writel(cntl, pcdev->base_emma + PRP_CNTL); - } - if ((((status & (3 << 5)) == (3 << 5)) || - ((status & (3 << 3)) == (3 << 3))) - && !list_empty(&pcdev->active_bufs)) { + + ibuf = list_first_entry(&pcdev->active_bufs, + struct mx2_buf_internal, queue); + mx27_camera_frame_done_emma(pcdev, + ibuf->bufnum, true); + + status &= ~(1 << 7); + } else if (((status & (3 << 5)) == (3 << 5)) || + ((status & (3 << 3)) == (3 << 3))) { /* * Both buffers have triggered, process the one we're expecting * to first */ - buf = list_entry(pcdev->active_bufs.next, - struct mx2_buffer, vb.queue); - mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE); - status &= ~(1 << (6 - buf->bufnum)); /* mark processed */ + ibuf = list_first_entry(&pcdev->active_bufs, + struct mx2_buf_internal, queue); + mx27_camera_frame_done_emma(pcdev, ibuf->bufnum, false); + status &= ~(1 << (6 - ibuf->bufnum)); /* mark processed */ + } else if ((status & (1 << 6)) || (status & (1 << 4))) { + mx27_camera_frame_done_emma(pcdev, 0, false); + } else if ((status & (1 << 5)) || (status & (1 << 3))) { + mx27_camera_frame_done_emma(pcdev, 1, false); } - if ((status & (1 << 6)) || (status & (1 << 4))) - mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE); - if ((status & (1 << 5)) || (status & (1 << 3))) - mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE); + spin_unlock(&pcdev->lock); writel(status, pcdev->base_emma + PRP_INTRSTATUS); return IRQ_HANDLED; @@ -1527,8 +1655,6 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) struct resource *res_csi, *res_emma; void __iomem *base_csi; int irq_csi, irq_emma; - irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq - : mx27_camera_irq; int err = 0; dev_dbg(&pdev->dev, "initialising\n"); @@ -1550,22 +1676,11 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->clk_csi = clk_get(&pdev->dev, NULL); if (IS_ERR(pcdev->clk_csi)) { + dev_err(&pdev->dev, "Could not get csi clock\n"); err = PTR_ERR(pcdev->clk_csi); goto exit_kfree; } - dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n", - clk_get_rate(pcdev->clk_csi)); - - /* Initialize DMA */ -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) { - err = mx27_camera_dma_init(pdev, pcdev); - if (err) - goto exit_clk_put; - } -#endif /* CONFIG_MACH_MX27 */ - pcdev->res_csi = res_csi; pcdev->pdata = pdev->dev.platform_data; if (pcdev->pdata) { @@ -1585,6 +1700,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) INIT_LIST_HEAD(&pcdev->capture); INIT_LIST_HEAD(&pcdev->active_bufs); + INIT_LIST_HEAD(&pcdev->discard); spin_lock_init(&pcdev->lock); /* @@ -1606,11 +1722,13 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->base_dma = res_csi->start; pcdev->dev = &pdev->dev; - err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0, - MX2_CAM_DRV_NAME, pcdev); - if (err) { - dev_err(pcdev->dev, "Camera interrupt register failed \n"); - goto exit_iounmap; + if (cpu_is_mx25()) { + err = request_irq(pcdev->irq_csi, mx25_camera_irq, 0, + MX2_CAM_DRV_NAME, pcdev); + if (err) { + dev_err(pcdev->dev, "Camera interrupt register failed \n"); + goto exit_iounmap; + } } if (cpu_is_mx27()) { @@ -1618,14 +1736,15 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1); irq_emma = platform_get_irq(pdev, 1); - if (res_emma && irq_emma >= 0) { - dev_info(&pdev->dev, "Using EMMA\n"); - pcdev->use_emma = 1; - pcdev->res_emma = res_emma; - pcdev->irq_emma = irq_emma; - if (mx27_camera_emma_init(pcdev)) - goto exit_free_irq; + if (!res_emma || !irq_emma) { + dev_err(&pdev->dev, "no EMMA resources\n"); + goto exit_free_irq; } + + pcdev->res_emma = res_emma; + pcdev->irq_emma = irq_emma; + if (mx27_camera_emma_init(pcdev)) + goto exit_free_irq; } pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME, @@ -1633,6 +1752,12 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->soc_host.priv = pcdev; pcdev->soc_host.v4l2_dev.dev = &pdev->dev; pcdev->soc_host.nr = pdev->id; + + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + err = PTR_ERR(pcdev->alloc_ctx); + goto eallocctx; + } err = soc_camera_host_register(&pcdev->soc_host); if (err) goto exit_free_emma; @@ -1643,26 +1768,24 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) return 0; exit_free_emma: - if (mx27_camera_emma(pcdev)) { + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); +eallocctx: + if (cpu_is_mx27()) { free_irq(pcdev->irq_emma, pcdev); clk_disable(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); - release_mem_region(res_emma->start, resource_size(res_emma)); + release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); } exit_free_irq: - free_irq(pcdev->irq_csi, pcdev); + if (cpu_is_mx25()) + free_irq(pcdev->irq_csi, pcdev); exit_iounmap: iounmap(base_csi); exit_release: release_mem_region(res_csi->start, resource_size(res_csi)); exit_dma_free: -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - imx_dma_free(pcdev->dma); -exit_clk_put: clk_put(pcdev->clk_csi); -#endif /* CONFIG_MACH_MX27 */ exit_kfree: kfree(pcdev); exit: @@ -1677,19 +1800,18 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) struct resource *res; clk_put(pcdev->clk_csi); -#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx25()) + free_irq(pcdev->irq_csi, pcdev); if (cpu_is_mx27()) - imx_dma_free(pcdev->dma); -#endif /* CONFIG_MACH_MX27 */ - free_irq(pcdev->irq_csi, pcdev); - if (mx27_camera_emma(pcdev)) free_irq(pcdev->irq_emma, pcdev); soc_camera_host_unregister(&pcdev->soc_host); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); + iounmap(pcdev->base_csi); - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { clk_disable(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); diff --git a/drivers/media/video/mx2_emmaprp.c b/drivers/media/video/mx2_emmaprp.c new file mode 100644 index 000000000000..ba89a7401c8c --- /dev/null +++ b/drivers/media/video/mx2_emmaprp.c @@ -0,0 +1,1008 @@ +/* + * Support eMMa-PrP through mem2mem framework. + * + * eMMa-PrP is a piece of HW that allows fetching buffers + * from one memory location and do several operations on + * them such as scaling or format conversion giving, as a result + * a new processed buffer in another memory location. + * + * Based on mem2mem_testdev.c by Pawel Osciak. + * + * Copyright (c) 2011 Vista Silicon S.L. + * Javier Martin <javier.martin@vista-silicon.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <linux/platform_device.h> +#include <media/v4l2-mem2mem.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-dma-contig.h> +#include <asm/sizes.h> + +#define EMMAPRP_MODULE_NAME "mem2mem-emmaprp" + +MODULE_DESCRIPTION("Mem-to-mem device which supports eMMa-PrP present in mx2 SoCs"); +MODULE_AUTHOR("Javier Martin <javier.martin@vista-silicon.com"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.1"); + +static bool debug; +module_param(debug, bool, 0644); + +#define MIN_W 32 +#define MIN_H 32 +#define MAX_W 2040 +#define MAX_H 2046 + +#define S_ALIGN 1 /* multiple of 2 */ +#define W_ALIGN_YUV420 3 /* multiple of 8 */ +#define W_ALIGN_OTHERS 2 /* multiple of 4 */ +#define H_ALIGN 1 /* multiple of 2 */ + +/* Flags that indicate a format can be used for capture/output */ +#define MEM2MEM_CAPTURE (1 << 0) +#define MEM2MEM_OUTPUT (1 << 1) + +#define MEM2MEM_NAME "m2m-emmaprp" + +/* In bytes, per queue */ +#define MEM2MEM_VID_MEM_LIMIT SZ_16M + +#define dprintk(dev, fmt, arg...) \ + v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: " fmt, __func__, ## arg) + +/* EMMA PrP */ +#define PRP_CNTL 0x00 +#define PRP_INTR_CNTL 0x04 +#define PRP_INTRSTATUS 0x08 +#define PRP_SOURCE_Y_PTR 0x0c +#define PRP_SOURCE_CB_PTR 0x10 +#define PRP_SOURCE_CR_PTR 0x14 +#define PRP_DEST_RGB1_PTR 0x18 +#define PRP_DEST_RGB2_PTR 0x1c +#define PRP_DEST_Y_PTR 0x20 +#define PRP_DEST_CB_PTR 0x24 +#define PRP_DEST_CR_PTR 0x28 +#define PRP_SRC_FRAME_SIZE 0x2c +#define PRP_DEST_CH1_LINE_STRIDE 0x30 +#define PRP_SRC_PIXEL_FORMAT_CNTL 0x34 +#define PRP_CH1_PIXEL_FORMAT_CNTL 0x38 +#define PRP_CH1_OUT_IMAGE_SIZE 0x3c +#define PRP_CH2_OUT_IMAGE_SIZE 0x40 +#define PRP_SRC_LINE_STRIDE 0x44 +#define PRP_CSC_COEF_012 0x48 +#define PRP_CSC_COEF_345 0x4c +#define PRP_CSC_COEF_678 0x50 +#define PRP_CH1_RZ_HORI_COEF1 0x54 +#define PRP_CH1_RZ_HORI_COEF2 0x58 +#define PRP_CH1_RZ_HORI_VALID 0x5c +#define PRP_CH1_RZ_VERT_COEF1 0x60 +#define PRP_CH1_RZ_VERT_COEF2 0x64 +#define PRP_CH1_RZ_VERT_VALID 0x68 +#define PRP_CH2_RZ_HORI_COEF1 0x6c +#define PRP_CH2_RZ_HORI_COEF2 0x70 +#define PRP_CH2_RZ_HORI_VALID 0x74 +#define PRP_CH2_RZ_VERT_COEF1 0x78 +#define PRP_CH2_RZ_VERT_COEF2 0x7c +#define PRP_CH2_RZ_VERT_VALID 0x80 + +#define PRP_CNTL_CH1EN (1 << 0) +#define PRP_CNTL_CH2EN (1 << 1) +#define PRP_CNTL_CSIEN (1 << 2) +#define PRP_CNTL_DATA_IN_YUV420 (0 << 3) +#define PRP_CNTL_DATA_IN_YUV422 (1 << 3) +#define PRP_CNTL_DATA_IN_RGB16 (2 << 3) +#define PRP_CNTL_DATA_IN_RGB32 (3 << 3) +#define PRP_CNTL_CH1_OUT_RGB8 (0 << 5) +#define PRP_CNTL_CH1_OUT_RGB16 (1 << 5) +#define PRP_CNTL_CH1_OUT_RGB32 (2 << 5) +#define PRP_CNTL_CH1_OUT_YUV422 (3 << 5) +#define PRP_CNTL_CH2_OUT_YUV420 (0 << 7) +#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7) +#define PRP_CNTL_CH2_OUT_YUV444 (2 << 7) +#define PRP_CNTL_CH1_LEN (1 << 9) +#define PRP_CNTL_CH2_LEN (1 << 10) +#define PRP_CNTL_SKIP_FRAME (1 << 11) +#define PRP_CNTL_SWRST (1 << 12) +#define PRP_CNTL_CLKEN (1 << 13) +#define PRP_CNTL_WEN (1 << 14) +#define PRP_CNTL_CH1BYP (1 << 15) +#define PRP_CNTL_IN_TSKIP(x) ((x) << 16) +#define PRP_CNTL_CH1_TSKIP(x) ((x) << 19) +#define PRP_CNTL_CH2_TSKIP(x) ((x) << 22) +#define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25) +#define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27) +#define PRP_CNTL_CH2B1EN (1 << 29) +#define PRP_CNTL_CH2B2EN (1 << 30) +#define PRP_CNTL_CH2FEN (1 << 31) + +#define PRP_SIZE_HEIGHT(x) (x) +#define PRP_SIZE_WIDTH(x) ((x) << 16) + +/* IRQ Enable and status register */ +#define PRP_INTR_RDERR (1 << 0) +#define PRP_INTR_CH1WERR (1 << 1) +#define PRP_INTR_CH2WERR (1 << 2) +#define PRP_INTR_CH1FC (1 << 3) +#define PRP_INTR_CH2FC (1 << 5) +#define PRP_INTR_LBOVF (1 << 7) +#define PRP_INTR_CH2OVF (1 << 8) + +#define PRP_INTR_ST_RDERR (1 << 0) +#define PRP_INTR_ST_CH1WERR (1 << 1) +#define PRP_INTR_ST_CH2WERR (1 << 2) +#define PRP_INTR_ST_CH2B2CI (1 << 3) +#define PRP_INTR_ST_CH2B1CI (1 << 4) +#define PRP_INTR_ST_CH1B2CI (1 << 5) +#define PRP_INTR_ST_CH1B1CI (1 << 6) +#define PRP_INTR_ST_LBOVF (1 << 7) +#define PRP_INTR_ST_CH2OVF (1 << 8) + +struct emmaprp_fmt { + char *name; + u32 fourcc; + /* Types the format can be used for */ + u32 types; +}; + +static struct emmaprp_fmt formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .types = MEM2MEM_CAPTURE, + }, + { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .types = MEM2MEM_OUTPUT, + }, +}; + +/* Per-queue, driver-specific private data */ +struct emmaprp_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct emmaprp_fmt *fmt; +}; + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) + +static struct emmaprp_fmt *find_format(struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + unsigned int k; + + for (k = 0; k < NUM_FORMATS; k++) { + fmt = &formats[k]; + if (fmt->fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == NUM_FORMATS) + return NULL; + + return &formats[k]; +} + +struct emmaprp_dev { + struct v4l2_device v4l2_dev; + struct video_device *vfd; + + struct mutex dev_mutex; + spinlock_t irqlock; + + int irq_emma; + void __iomem *base_emma; + struct clk *clk_emma; + struct resource *res_emma; + + struct v4l2_m2m_dev *m2m_dev; + struct vb2_alloc_ctx *alloc_ctx; +}; + +struct emmaprp_ctx { + struct emmaprp_dev *dev; + /* Abort requested by m2m */ + int aborting; + struct emmaprp_q_data q_data[2]; + struct v4l2_m2m_ctx *m2m_ctx; +}; + +static struct emmaprp_q_data *get_q_data(struct emmaprp_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &(ctx->q_data[V4L2_M2M_SRC]); + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &(ctx->q_data[V4L2_M2M_DST]); + default: + BUG(); + } + return NULL; +} + +/* + * mem2mem callbacks + */ +static void emmaprp_job_abort(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + + ctx->aborting = 1; + + dprintk(pcdev, "Aborting task\n"); + + v4l2_m2m_job_finish(pcdev->m2m_dev, ctx->m2m_ctx); +} + +static void emmaprp_lock(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + mutex_lock(&pcdev->dev_mutex); +} + +static void emmaprp_unlock(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + mutex_unlock(&pcdev->dev_mutex); +} + +static inline void emmaprp_dump_regs(struct emmaprp_dev *pcdev) +{ + dprintk(pcdev, + "eMMa-PrP Registers:\n" + " SOURCE_Y_PTR = 0x%08X\n" + " SRC_FRAME_SIZE = 0x%08X\n" + " DEST_Y_PTR = 0x%08X\n" + " DEST_CR_PTR = 0x%08X\n" + " DEST_CB_PTR = 0x%08X\n" + " CH2_OUT_IMAGE_SIZE = 0x%08X\n" + " CNTL = 0x%08X\n", + readl(pcdev->base_emma + PRP_SOURCE_Y_PTR), + readl(pcdev->base_emma + PRP_SRC_FRAME_SIZE), + readl(pcdev->base_emma + PRP_DEST_Y_PTR), + readl(pcdev->base_emma + PRP_DEST_CR_PTR), + readl(pcdev->base_emma + PRP_DEST_CB_PTR), + readl(pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE), + readl(pcdev->base_emma + PRP_CNTL)); +} + +static void emmaprp_device_run(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_q_data *s_q_data, *d_q_data; + struct vb2_buffer *src_buf, *dst_buf; + struct emmaprp_dev *pcdev = ctx->dev; + unsigned int s_width, s_height; + unsigned int d_width, d_height; + unsigned int d_size; + dma_addr_t p_in, p_out; + u32 tmp; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + + s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + s_width = s_q_data->width; + s_height = s_q_data->height; + + d_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + d_width = d_q_data->width; + d_height = d_q_data->height; + d_size = d_width * d_height; + + p_in = vb2_dma_contig_plane_dma_addr(src_buf, 0); + p_out = vb2_dma_contig_plane_dma_addr(dst_buf, 0); + if (!p_in || !p_out) { + v4l2_err(&pcdev->v4l2_dev, + "Acquiring kernel pointers to buffers failed\n"); + return; + } + + /* Input frame parameters */ + writel(p_in, pcdev->base_emma + PRP_SOURCE_Y_PTR); + writel(PRP_SIZE_WIDTH(s_width) | PRP_SIZE_HEIGHT(s_height), + pcdev->base_emma + PRP_SRC_FRAME_SIZE); + + /* Output frame parameters */ + writel(p_out, pcdev->base_emma + PRP_DEST_Y_PTR); + writel(p_out + d_size, pcdev->base_emma + PRP_DEST_CB_PTR); + writel(p_out + d_size + (d_size >> 2), + pcdev->base_emma + PRP_DEST_CR_PTR); + writel(PRP_SIZE_WIDTH(d_width) | PRP_SIZE_HEIGHT(d_height), + pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); + + /* IRQ configuration */ + tmp = readl(pcdev->base_emma + PRP_INTR_CNTL); + writel(tmp | PRP_INTR_RDERR | + PRP_INTR_CH2WERR | + PRP_INTR_CH2FC, + pcdev->base_emma + PRP_INTR_CNTL); + + emmaprp_dump_regs(pcdev); + + /* Enable transfer */ + tmp = readl(pcdev->base_emma + PRP_CNTL); + writel(tmp | PRP_CNTL_CH2_OUT_YUV420 | + PRP_CNTL_DATA_IN_YUV422 | + PRP_CNTL_CH2EN, + pcdev->base_emma + PRP_CNTL); +} + +static irqreturn_t emmaprp_irq(int irq_emma, void *data) +{ + struct emmaprp_dev *pcdev = data; + struct emmaprp_ctx *curr_ctx; + struct vb2_buffer *src_vb, *dst_vb; + unsigned long flags; + u32 irqst; + + /* Check irq flags and clear irq */ + irqst = readl(pcdev->base_emma + PRP_INTRSTATUS); + writel(irqst, pcdev->base_emma + PRP_INTRSTATUS); + dprintk(pcdev, "irqst = 0x%08x\n", irqst); + + curr_ctx = v4l2_m2m_get_curr_priv(pcdev->m2m_dev); + if (curr_ctx == NULL) { + pr_err("Instance released before the end of transaction\n"); + return IRQ_HANDLED; + } + + if (!curr_ctx->aborting) { + if ((irqst & PRP_INTR_ST_RDERR) || + (irqst & PRP_INTR_ST_CH2WERR)) { + pr_err("PrP bus error ocurred, this transfer is probably corrupted\n"); + writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); + } else if (irqst & PRP_INTR_ST_CH2B1CI) { /* buffer ready */ + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + + spin_lock_irqsave(&pcdev->irqlock, flags); + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE); + spin_unlock_irqrestore(&pcdev->irqlock, flags); + } + } + + v4l2_m2m_job_finish(pcdev->m2m_dev, curr_ctx->m2m_ctx); + return IRQ_HANDLED; +} + +/* + * video ioctls + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); + strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT + | V4L2_CAP_STREAMING; + + return 0; +} + +static int enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + int i, num; + struct emmaprp_fmt *fmt; + + num = 0; + + for (i = 0; i < NUM_FORMATS; ++i) { + if (formats[i].types & type) { + /* index-th format of type type found ? */ + if (num == f->index) + break; + /* Correct type but haven't reached our index yet, + * just increment per-type index */ + ++num; + } + } + + if (i < NUM_FORMATS) { + /* Format found */ + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description) - 1); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_CAPTURE); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_OUTPUT); +} + +static int vidioc_g_fmt(struct emmaprp_ctx *ctx, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct emmaprp_q_data *q_data; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) + f->fmt.pix.bytesperline = q_data->width * 3 / 2; + else /* YUYV */ + f->fmt.pix.bytesperline = q_data->width * 2; + f->fmt.pix.sizeimage = q_data->sizeimage; + + return 0; +} + +static int vidioc_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_try_fmt(struct v4l2_format *f) +{ + enum v4l2_field field; + + + if (!find_format(f)) + return -EINVAL; + + field = f->fmt.pix.field; + if (field == V4L2_FIELD_ANY) + field = V4L2_FIELD_NONE; + else if (V4L2_FIELD_NONE != field) + return -EINVAL; + + /* V4L2 specification suggests the driver corrects the format struct + * if any of the dimensions is unsupported */ + f->fmt.pix.field = field; + + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN_YUV420, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = f->fmt.pix.width * 3 / 2; + } else { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN_OTHERS, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + } + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + struct emmaprp_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + return vidioc_try_fmt(f); +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + struct emmaprp_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + return vidioc_try_fmt(f); +} + +static int vidioc_s_fmt(struct emmaprp_ctx *ctx, struct v4l2_format *f) +{ + struct emmaprp_q_data *q_data; + struct vb2_queue *vq; + int ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + ret = vidioc_try_fmt(f); + if (ret) + return ret; + + q_data->fmt = find_format(f); + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + if (q_data->fmt->fourcc == V4L2_PIX_FMT_YUV420) + q_data->sizeimage = q_data->width * q_data->height * 3 / 2; + else /* YUYV */ + q_data->sizeimage = q_data->width * q_data->height * 2; + + dprintk(ctx->dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(priv, f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(priv, f); +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops emmaprp_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + + +/* + * Queue operations + */ +static int emmaprp_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vq); + struct emmaprp_q_data *q_data; + unsigned int size, count = *nbuffers; + + q_data = get_q_data(ctx, vq->type); + + if (q_data->fmt->fourcc == V4L2_PIX_FMT_YUV420) + size = q_data->width * q_data->height * 3 / 2; + else + size = q_data->width * q_data->height * 2; + + while (size * count > MEM2MEM_VID_MEM_LIMIT) + (count)--; + + *nplanes = 1; + *nbuffers = count; + sizes[0] = size; + + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + dprintk(ctx->dev, "get %d buffer(s) of size %d each.\n", count, size); + + return 0; +} + +static int emmaprp_buf_prepare(struct vb2_buffer *vb) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct emmaprp_q_data *q_data; + + dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); + + q_data = get_q_data(ctx, vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + dprintk(ctx->dev, "%s data will not fit into plane" + "(%lu < %lu)\n", __func__, + vb2_plane_size(vb, 0), + (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void emmaprp_buf_queue(struct vb2_buffer *vb) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static struct vb2_ops emmaprp_qops = { + .queue_setup = emmaprp_queue_setup, + .buf_prepare = emmaprp_buf_prepare, + .buf_queue = emmaprp_buf_queue, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct emmaprp_ctx *ctx = priv; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &emmaprp_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &emmaprp_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + + return vb2_queue_init(dst_vq); +} + +/* + * File operations + */ +static int emmaprp_open(struct file *file) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx; + + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + file->private_data = ctx; + ctx->dev = pcdev; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(pcdev->m2m_dev, ctx, &queue_init); + + if (IS_ERR(ctx->m2m_ctx)) { + int ret = PTR_ERR(ctx->m2m_ctx); + + kfree(ctx); + return ret; + } + + clk_enable(pcdev->clk_emma); + ctx->q_data[V4L2_M2M_SRC].fmt = &formats[1]; + ctx->q_data[V4L2_M2M_DST].fmt = &formats[0]; + + dprintk(pcdev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); + + return 0; +} + +static int emmaprp_release(struct file *file) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx = file->private_data; + + dprintk(pcdev, "Releasing instance %p\n", ctx); + + clk_disable(pcdev->clk_emma); + v4l2_m2m_ctx_release(ctx->m2m_ctx); + kfree(ctx); + + return 0; +} + +static unsigned int emmaprp_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct emmaprp_ctx *ctx = file->private_data; + + return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); +} + +static int emmaprp_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct emmaprp_ctx *ctx = file->private_data; + + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); +} + +static const struct v4l2_file_operations emmaprp_fops = { + .owner = THIS_MODULE, + .open = emmaprp_open, + .release = emmaprp_release, + .poll = emmaprp_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = emmaprp_mmap, +}; + +static struct video_device emmaprp_videodev = { + .name = MEM2MEM_NAME, + .fops = &emmaprp_fops, + .ioctl_ops = &emmaprp_ioctl_ops, + .minor = -1, + .release = video_device_release, +}; + +static struct v4l2_m2m_ops m2m_ops = { + .device_run = emmaprp_device_run, + .job_abort = emmaprp_job_abort, + .lock = emmaprp_lock, + .unlock = emmaprp_unlock, +}; + +static int emmaprp_probe(struct platform_device *pdev) +{ + struct emmaprp_dev *pcdev; + struct video_device *vfd; + struct resource *res_emma; + int irq_emma; + int ret; + + pcdev = kzalloc(sizeof *pcdev, GFP_KERNEL); + if (!pcdev) + return -ENOMEM; + + spin_lock_init(&pcdev->irqlock); + + pcdev->clk_emma = clk_get(&pdev->dev, NULL); + if (IS_ERR(pcdev->clk_emma)) { + ret = PTR_ERR(pcdev->clk_emma); + goto free_dev; + } + + irq_emma = platform_get_irq(pdev, 0); + res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (irq_emma < 0 || res_emma == NULL) { + dev_err(&pdev->dev, "Missing platform resources data\n"); + ret = -ENODEV; + goto free_clk; + } + + ret = v4l2_device_register(&pdev->dev, &pcdev->v4l2_dev); + if (ret) + goto free_clk; + + mutex_init(&pcdev->dev_mutex); + + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&pcdev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto unreg_dev; + } + + *vfd = emmaprp_videodev; + vfd->lock = &pcdev->dev_mutex; + + video_set_drvdata(vfd, pcdev); + snprintf(vfd->name, sizeof(vfd->name), "%s", emmaprp_videodev.name); + pcdev->vfd = vfd; + v4l2_info(&pcdev->v4l2_dev, EMMAPRP_MODULE_NAME + " Device registered as /dev/video%d\n", vfd->num); + + platform_set_drvdata(pdev, pcdev); + + if (devm_request_mem_region(&pdev->dev, res_emma->start, + resource_size(res_emma), MEM2MEM_NAME) == NULL) + goto rel_vdev; + + pcdev->base_emma = devm_ioremap(&pdev->dev, res_emma->start, + resource_size(res_emma)); + if (!pcdev->base_emma) + goto rel_vdev; + + pcdev->irq_emma = irq_emma; + pcdev->res_emma = res_emma; + + if (devm_request_irq(&pdev->dev, pcdev->irq_emma, emmaprp_irq, + 0, MEM2MEM_NAME, pcdev) < 0) + goto rel_vdev; + + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to alloc vb2 context\n"); + ret = PTR_ERR(pcdev->alloc_ctx); + goto rel_vdev; + } + + pcdev->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(pcdev->m2m_dev)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(pcdev->m2m_dev); + goto rel_ctx; + } + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&pcdev->v4l2_dev, "Failed to register video device\n"); + goto rel_m2m; + } + + return 0; + + +rel_m2m: + v4l2_m2m_release(pcdev->m2m_dev); +rel_ctx: + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); +rel_vdev: + video_device_release(vfd); +unreg_dev: + v4l2_device_unregister(&pcdev->v4l2_dev); +free_clk: + clk_put(pcdev->clk_emma); +free_dev: + kfree(pcdev); + + return ret; +} + +static int emmaprp_remove(struct platform_device *pdev) +{ + struct emmaprp_dev *pcdev = platform_get_drvdata(pdev); + + v4l2_info(&pcdev->v4l2_dev, "Removing " EMMAPRP_MODULE_NAME); + + video_unregister_device(pcdev->vfd); + v4l2_m2m_release(pcdev->m2m_dev); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); + v4l2_device_unregister(&pcdev->v4l2_dev); + clk_put(pcdev->clk_emma); + kfree(pcdev); + + return 0; +} + +static struct platform_driver emmaprp_pdrv = { + .probe = emmaprp_probe, + .remove = emmaprp_remove, + .driver = { + .name = MEM2MEM_NAME, + .owner = THIS_MODULE, + }, +}; + +static void __exit emmaprp_exit(void) +{ + platform_driver_unregister(&emmaprp_pdrv); +} + +static int __init emmaprp_init(void) +{ + return platform_driver_register(&emmaprp_pdrv); +} + +module_init(emmaprp_init); +module_exit(emmaprp_exit); diff --git a/drivers/media/video/noon010pc30.c b/drivers/media/video/noon010pc30.c index 50838bf84204..440c12962bae 100644 --- a/drivers/media/video/noon010pc30.c +++ b/drivers/media/video/noon010pc30.c @@ -725,8 +725,8 @@ static int noon010_probe(struct i2c_client *client, mutex_init(&info->lock); sd = &info->sd; - strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); v4l2_i2c_subdev_init(sd, client, &noon010_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); sd->internal_ops = &noon010_subdev_internal_ops; sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; @@ -844,18 +844,7 @@ static struct i2c_driver noon010_i2c_driver = { .id_table = noon010_id, }; -static int __init noon010_init(void) -{ - return i2c_add_driver(&noon010_i2c_driver); -} - -static void __exit noon010_exit(void) -{ - i2c_del_driver(&noon010_i2c_driver); -} - -module_init(noon010_init); -module_exit(noon010_exit); +module_i2c_driver(noon010_i2c_driver); MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 1fb7d5bd5ec2..88cf9d952631 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -2268,13 +2268,12 @@ static struct platform_driver omap_vout_driver = { .driver = { .name = VOUT_NAME, }, - .probe = omap_vout_probe, .remove = omap_vout_remove, }; static int __init omap_vout_init(void) { - if (platform_driver_register(&omap_vout_driver) != 0) { + if (platform_driver_probe(&omap_vout_driver, omap_vout_probe) != 0) { printk(KERN_ERR VOUT_NAME ":Could not register Video driver\n"); return -EINVAL; } diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c index b5247cb64fde..3c2c5d3bcc6b 100644 --- a/drivers/media/video/ov2640.c +++ b/drivers/media/video/ov2640.c @@ -1103,21 +1103,7 @@ static struct i2c_driver ov2640_i2c_driver = { .id_table = ov2640_id, }; -/* - * Module functions - */ -static int __init ov2640_module_init(void) -{ - return i2c_add_driver(&ov2640_i2c_driver); -} - -static void __exit ov2640_module_exit(void) -{ - i2c_del_driver(&ov2640_i2c_driver); -} - -module_init(ov2640_module_init); -module_exit(ov2640_module_exit); +module_i2c_driver(ov2640_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor"); MODULE_AUTHOR("Alberto Panizzo"); diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c index bb37ec80f274..80e07794ac8e 100644 --- a/drivers/media/video/ov5642.c +++ b/drivers/media/video/ov5642.c @@ -1068,18 +1068,7 @@ static struct i2c_driver ov5642_i2c_driver = { .id_table = ov5642_id, }; -static int __init ov5642_mod_init(void) -{ - return i2c_add_driver(&ov5642_i2c_driver); -} - -static void __exit ov5642_mod_exit(void) -{ - i2c_del_driver(&ov5642_i2c_driver); -} - -module_init(ov5642_mod_init); -module_exit(ov5642_mod_exit); +module_i2c_driver(ov5642_i2c_driver); MODULE_DESCRIPTION("Omnivision OV5642 Camera driver"); MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index 3627f3225bbb..3e028b1970dd 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -1046,18 +1046,7 @@ static struct i2c_driver ov6650_i2c_driver = { .id_table = ov6650_id, }; -static int __init ov6650_module_init(void) -{ - return i2c_add_driver(&ov6650_i2c_driver); -} - -static void __exit ov6650_module_exit(void) -{ - i2c_del_driver(&ov6650_i2c_driver); -} - -module_init(ov6650_module_init); -module_exit(ov6650_module_exit); +module_i2c_driver(ov6650_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV6650"); MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>"); diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index 6a564964853a..e7c82b297514 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -1583,15 +1583,4 @@ static struct i2c_driver ov7670_driver = { .id_table = ov7670_id, }; -static __init int init_ov7670(void) -{ - return i2c_add_driver(&ov7670_driver); -} - -static __exit void exit_ov7670(void) -{ - i2c_del_driver(&ov7670_driver); -} - -module_init(init_ov7670); -module_exit(exit_ov7670); +module_i2c_driver(ov7670_driver); diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c index 9f6ce3d8a29e..74e77d327ed8 100644 --- a/drivers/media/video/ov772x.c +++ b/drivers/media/video/ov772x.c @@ -1123,22 +1123,7 @@ static struct i2c_driver ov772x_i2c_driver = { .id_table = ov772x_id, }; -/* - * module function - */ - -static int __init ov772x_module_init(void) -{ - return i2c_add_driver(&ov772x_i2c_driver); -} - -static void __exit ov772x_module_exit(void) -{ - i2c_del_driver(&ov772x_i2c_driver); -} - -module_init(ov772x_module_init); -module_exit(ov772x_module_exit); +module_i2c_driver(ov772x_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for ov772x"); MODULE_AUTHOR("Kuninori Morimoto"); diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c index a4f99797eb56..23412debb36b 100644 --- a/drivers/media/video/ov9640.c +++ b/drivers/media/video/ov9640.c @@ -738,18 +738,7 @@ static struct i2c_driver ov9640_i2c_driver = { .id_table = ov9640_id, }; -static int __init ov9640_module_init(void) -{ - return i2c_add_driver(&ov9640_i2c_driver); -} - -static void __exit ov9640_module_exit(void) -{ - i2c_del_driver(&ov9640_i2c_driver); -} - -module_init(ov9640_module_init); -module_exit(ov9640_module_exit); +module_i2c_driver(ov9640_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV96xx"); MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c index d9a9f7174f7a..3eb07c22516e 100644 --- a/drivers/media/video/ov9740.c +++ b/drivers/media/video/ov9740.c @@ -998,18 +998,7 @@ static struct i2c_driver ov9740_i2c_driver = { .id_table = ov9740_id, }; -static int __init ov9740_module_init(void) -{ - return i2c_add_driver(&ov9740_i2c_driver); -} - -static void __exit ov9740_module_exit(void) -{ - i2c_del_driver(&ov9740_i2c_driver); -} - -module_init(ov9740_module_init); -module_exit(ov9740_module_exit); +module_i2c_driver(ov9740_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV9740"); MODULE_AUTHOR("Andrew Chew <achew@nvidia.com>"); diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index c6da8f77e1a2..d8c898278e8c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -320,7 +320,17 @@ static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; +static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + static struct tda18271_config hauppauge_tda18271_dvb_config = { + .std_map = &hauppauge_tda18271_dvbt_std_map, .gate = TDA18271_GATE_ANALOG, .output_opt = TDA18271_OUTPUT_LT_OFF, }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 6d666174dbb4..e1111d968a3d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -96,7 +96,6 @@ static struct v4l2_capability pvr_capability ={ .capabilities = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO | V4L2_CAP_READWRITE), - .reserved = {0,0,0,0} }; static struct v4l2_fmtdesc pvr_fmtdesc [] = { diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index f495eeb5403a..2834e3e65b39 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -1146,14 +1146,6 @@ leave: return ret; } -static int pwc_log_status(struct file *file, void *priv) -{ - struct pwc_device *pdev = video_drvdata(file); - - v4l2_ctrl_handler_log_status(&pdev->ctrl_handler, PWC_NAME); - return 0; -} - const struct v4l2_ioctl_ops pwc_ioctl_ops = { .vidioc_querycap = pwc_querycap, .vidioc_enum_input = pwc_enum_input, @@ -1169,7 +1161,7 @@ const struct v4l2_ioctl_ops pwc_ioctl_ops = { .vidioc_dqbuf = pwc_dqbuf, .vidioc_streamon = pwc_streamon, .vidioc_streamoff = pwc_streamoff, - .vidioc_log_status = pwc_log_status, + .vidioc_log_status = v4l2_ctrl_log_status, .vidioc_enum_framesizes = pwc_enum_framesizes, .vidioc_enum_frameintervals = pwc_enum_frameintervals, .vidioc_g_parm = pwc_g_parm, diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 0bd7da26d018..5a413f4427e0 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -921,12 +921,12 @@ static void pxa_camera_activate(struct pxa_camera_dev *pcdev) /* "Safe default" - 13MHz */ recalculate_fifo_timeout(pcdev, 13000000); - clk_enable(pcdev->clk); + clk_prepare_enable(pcdev->clk); } static void pxa_camera_deactivate(struct pxa_camera_dev *pcdev) { - clk_disable(pcdev->clk); + clk_disable_unprepare(pcdev->clk); } static irqreturn_t pxa_camera_irq(int irq, void *data) diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c index 9937386a3bae..f6419b22c258 100644 --- a/drivers/media/video/rj54n1cb0c.c +++ b/drivers/media/video/rj54n1cb0c.c @@ -1407,18 +1407,7 @@ static struct i2c_driver rj54n1_i2c_driver = { .id_table = rj54n1_id, }; -static int __init rj54n1_mod_init(void) -{ - return i2c_add_driver(&rj54n1_i2c_driver); -} - -static void __exit rj54n1_mod_exit(void) -{ - i2c_del_driver(&rj54n1_i2c_driver); -} - -module_init(rj54n1_mod_init); -module_exit(rj54n1_mod_exit); +module_i2c_driver(rj54n1_i2c_driver); MODULE_DESCRIPTION("Sharp RJ54N1CB0C Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index c1bef6187661..4894cbb1c547 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -134,7 +134,7 @@ /* usb config commands */ #define IN_DATA_TOKEN cpu_to_le32(0x2255c0de) -#define CMD_2255 cpu_to_le32(0xc2255000) +#define CMD_2255 0xc2255000 #define CMD_SET_MODE cpu_to_le32((CMD_2255 | 0x10)) #define CMD_START cpu_to_le32((CMD_2255 | 0x20)) #define CMD_STOP cpu_to_le32((CMD_2255 | 0x30)) @@ -852,15 +852,13 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - int index = 0; - if (f) - index = f->index; + int index = f->index; if (index >= ARRAY_SIZE(formats)) return -EINVAL; - if (!jpeg_enable && ((formats[index].fourcc == V4L2_PIX_FMT_JPEG) || - (formats[index].fourcc == V4L2_PIX_FMT_MJPEG))) - return -EINVAL; + if (!jpeg_enable && ((formats[index].fourcc == V4L2_PIX_FMT_JPEG) || + (formats[index].fourcc == V4L2_PIX_FMT_MJPEG))) + return -EINVAL; dprintk(4, "name %s\n", formats[index].name); strlcpy(f->description, formats[index].name, sizeof(f->description)); f->pixelformat = formats[index].fourcc; @@ -2027,7 +2025,7 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) pdata[1]); offset = jj + PREFIX_SIZE; bframe = 1; - cc = pdword[1]; + cc = le32_to_cpu(pdword[1]); if (cc >= MAX_CHANNELS) { printk(KERN_ERR "bad channel\n"); @@ -2036,22 +2034,22 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) /* reverse it */ dev->cc = G_chnmap[cc]; channel = &dev->channel[dev->cc]; - payload = pdword[3]; + payload = le32_to_cpu(pdword[3]); if (payload > channel->req_image_size) { channel->bad_payload++; /* discard the bad frame */ return -EINVAL; } channel->pkt_size = payload; - channel->jpg_size = pdword[4]; + channel->jpg_size = le32_to_cpu(pdword[4]); break; case S2255_MARKER_RESPONSE: pdata += DEF_USB_BLOCK; jj += DEF_USB_BLOCK; - if (pdword[1] >= MAX_CHANNELS) + if (le32_to_cpu(pdword[1]) >= MAX_CHANNELS) break; - cc = G_chnmap[pdword[1]]; + cc = G_chnmap[le32_to_cpu(pdword[1])]; if (cc >= MAX_CHANNELS) break; channel = &dev->channel[cc]; @@ -2074,11 +2072,11 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) wake_up(&dev->fw_data->wait_fw); break; case S2255_RESPONSE_STATUS: - channel->vidstatus = pdword[3]; + channel->vidstatus = le32_to_cpu(pdword[3]); channel->vidstatus_ready = 1; wake_up(&channel->wait_vidstatus); dprintk(5, "got vidstatus %x chan %d\n", - pdword[3], cc); + le32_to_cpu(pdword[3]), cc); break; default: printk(KERN_INFO "s2255 unknown resp\n"); @@ -2605,10 +2603,11 @@ static int s2255_probe(struct usb_interface *interface, __le32 *pRel; pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4]; printk(KERN_INFO "s2255 dsp fw version %x\n", *pRel); - dev->dsp_fw_ver = *pRel; - if (*pRel < S2255_CUR_DSP_FWVER) + dev->dsp_fw_ver = le32_to_cpu(*pRel); + if (dev->dsp_fw_ver < S2255_CUR_DSP_FWVER) printk(KERN_INFO "s2255: f2255usb.bin out of date.\n"); - if (dev->pid == 0x2257 && *pRel < S2255_MIN_DSP_COLORFILTER) + if (dev->pid == 0x2257 && + dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER) printk(KERN_WARNING "s2255: 2257 requires firmware %d" " or above.\n", S2255_MIN_DSP_COLORFILTER); } diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c index 0df7f2a41814..6625e46a4638 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/video/s5k6aa.c @@ -1582,8 +1582,8 @@ static int s5k6aa_probe(struct i2c_client *client, s5k6aa->inv_vflip = pdata->vert_flip; sd = &s5k6aa->sd; - strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name)); v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops); + strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name)); sd->internal_ops = &s5k6aa_subdev_internal_ops; sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; @@ -1663,18 +1663,7 @@ static struct i2c_driver s5k6aa_i2c_driver = { .id_table = s5k6aa_id, }; -static int __init s5k6aa_init(void) -{ - return i2c_add_driver(&s5k6aa_i2c_driver); -} - -static void __exit s5k6aa_exit(void) -{ - i2c_del_driver(&s5k6aa_i2c_driver); -} - -module_init(s5k6aa_init); -module_exit(s5k6aa_exit); +module_i2c_driver(s5k6aa_i2c_driver); MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver"); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index a9e9653beeb4..b06efd208328 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -1019,52 +1019,117 @@ static int fimc_cap_dqbuf(struct file *file, void *priv, return vb2_dqbuf(&fimc->vid_cap.vbq, buf, file->f_flags & O_NONBLOCK); } -static int fimc_cap_cropcap(struct file *file, void *fh, - struct v4l2_cropcap *cr) +static int fimc_cap_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *create) { struct fimc_dev *fimc = video_drvdata(file); - struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame; - if (cr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) - return -EINVAL; + return vb2_create_bufs(&fimc->vid_cap.vbq, create); +} - cr->bounds.left = 0; - cr->bounds.top = 0; - cr->bounds.width = f->o_width; - cr->bounds.height = f->o_height; - cr->defrect = cr->bounds; +static int fimc_cap_prepare_buf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct fimc_dev *fimc = video_drvdata(file); - return 0; + return vb2_prepare_buf(&fimc->vid_cap.vbq, b); } -static int fimc_cap_g_crop(struct file *file, void *fh, struct v4l2_crop *cr) +static int fimc_cap_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) { struct fimc_dev *fimc = video_drvdata(file); - struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame; + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct fimc_frame *f = &ctx->s_frame; - cr->c.left = f->offs_h; - cr->c.top = f->offs_v; - cr->c.width = f->width; - cr->c.height = f->height; + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; - return 0; + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + f = &ctx->d_frame; + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = 0; + s->r.top = 0; + s->r.width = f->o_width; + s->r.height = f->o_height; + return 0; + + case V4L2_SEL_TGT_COMPOSE_ACTIVE: + f = &ctx->d_frame; + case V4L2_SEL_TGT_CROP_ACTIVE: + s->r.left = f->offs_h; + s->r.top = f->offs_v; + s->r.width = f->width; + s->r.height = f->height; + return 0; + } + + return -EINVAL; } -static int fimc_cap_s_crop(struct file *file, void *fh, struct v4l2_crop *cr) +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ +int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b) +{ + if (a->left < b->left || a->top < b->top) + return 0; + if (a->left + a->width > b->left + b->width) + return 0; + if (a->top + a->height > b->top + b->height) + return 0; + + return 1; +} + +static int fimc_cap_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) { struct fimc_dev *fimc = video_drvdata(file); struct fimc_ctx *ctx = fimc->vid_cap.ctx; - struct fimc_frame *ff; + struct v4l2_rect rect = s->r; + struct fimc_frame *f; unsigned long flags; + unsigned int pad; - fimc_capture_try_crop(ctx, &cr->c, FIMC_SD_PAD_SINK); - ff = &ctx->s_frame; + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_ACTIVE: + f = &ctx->d_frame; + pad = FIMC_SD_PAD_SOURCE; + break; + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + case V4L2_SEL_TGT_CROP_ACTIVE: + f = &ctx->s_frame; + pad = FIMC_SD_PAD_SINK; + break; + default: + return -EINVAL; + } + + fimc_capture_try_crop(ctx, &rect, pad); + + if (s->flags & V4L2_SEL_FLAG_LE && + !enclosed_rectangle(&rect, &s->r)) + return -ERANGE; + + if (s->flags & V4L2_SEL_FLAG_GE && + !enclosed_rectangle(&s->r, &rect)) + return -ERANGE; + + s->r = rect; spin_lock_irqsave(&fimc->slock, flags); - set_frame_crop(ff, cr->c.left, cr->c.top, cr->c.width, cr->c.height); - set_bit(ST_CAPT_APPLY_CFG, &fimc->state); + set_frame_crop(f, s->r.left, s->r.top, s->r.width, + s->r.height); spin_unlock_irqrestore(&fimc->slock, flags); + set_bit(ST_CAPT_APPLY_CFG, &fimc->state); return 0; } @@ -1082,12 +1147,14 @@ static const struct v4l2_ioctl_ops fimc_capture_ioctl_ops = { .vidioc_qbuf = fimc_cap_qbuf, .vidioc_dqbuf = fimc_cap_dqbuf, + .vidioc_prepare_buf = fimc_cap_prepare_buf, + .vidioc_create_bufs = fimc_cap_create_bufs, + .vidioc_streamon = fimc_cap_streamon, .vidioc_streamoff = fimc_cap_streamoff, - .vidioc_g_crop = fimc_cap_g_crop, - .vidioc_s_crop = fimc_cap_s_crop, - .vidioc_cropcap = fimc_cap_cropcap, + .vidioc_g_selection = fimc_cap_g_selection, + .vidioc_s_selection = fimc_cap_s_selection, .vidioc_enum_input = fimc_cap_enum_input, .vidioc_s_input = fimc_cap_s_input, diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 81bcbb9492ea..e184e650022a 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -1602,24 +1602,35 @@ static void fimc_clk_put(struct fimc_dev *fimc) { int i; for (i = 0; i < fimc->num_clocks; i++) { - if (fimc->clock[i]) - clk_put(fimc->clock[i]); + if (IS_ERR_OR_NULL(fimc->clock[i])) + continue; + clk_unprepare(fimc->clock[i]); + clk_put(fimc->clock[i]); + fimc->clock[i] = NULL; } } static int fimc_clk_get(struct fimc_dev *fimc) { - int i; + int i, ret; + for (i = 0; i < fimc->num_clocks; i++) { fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clocks[i]); - if (!IS_ERR_OR_NULL(fimc->clock[i])) - continue; - dev_err(&fimc->pdev->dev, "failed to get fimc clock: %s\n", - fimc_clocks[i]); - return -ENXIO; + if (IS_ERR(fimc->clock[i])) + goto err; + ret = clk_prepare(fimc->clock[i]); + if (ret < 0) { + clk_put(fimc->clock[i]); + fimc->clock[i] = NULL; + goto err; + } } - return 0; +err: + fimc_clk_put(fimc); + dev_err(&fimc->pdev->dev, "failed to get clock: %s\n", + fimc_clocks[i]); + return -ENXIO; } static int fimc_m2m_suspend(struct fimc_dev *fimc) @@ -1667,8 +1678,6 @@ static int fimc_probe(struct platform_device *pdev) struct s5p_platform_fimc *pdata; int ret = 0; - dev_dbg(&pdev->dev, "%s():\n", __func__); - drv_data = (struct samsung_fimc_driverdata *) platform_get_device_id(pdev)->driver_data; @@ -1678,7 +1687,7 @@ static int fimc_probe(struct platform_device *pdev) return -EINVAL; } - fimc = kzalloc(sizeof(struct fimc_dev), GFP_KERNEL); + fimc = devm_kzalloc(&pdev->dev, sizeof(*fimc), GFP_KERNEL); if (!fimc) return -ENOMEM; @@ -1689,51 +1698,35 @@ static int fimc_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; fimc->pdata = pdata; - init_waitqueue_head(&fimc->irq_queue); spin_lock_init(&fimc->slock); mutex_init(&fimc->lock); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to find the registers\n"); - ret = -ENOENT; - goto err_info; - } - - fimc->regs_res = request_mem_region(res->start, resource_size(res), - dev_name(&pdev->dev)); - if (!fimc->regs_res) { - dev_err(&pdev->dev, "failed to obtain register region\n"); - ret = -ENOENT; - goto err_info; - } - - fimc->regs = ioremap(res->start, resource_size(res)); - if (!fimc->regs) { - dev_err(&pdev->dev, "failed to map registers\n"); - ret = -ENXIO; - goto err_req_region; + fimc->regs = devm_request_and_ioremap(&pdev->dev, res); + if (fimc->regs == NULL) { + dev_err(&pdev->dev, "Failed to obtain io memory\n"); + return -ENOENT; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get IRQ resource\n"); - ret = -ENXIO; - goto err_regs_unmap; + if (res == NULL) { + dev_err(&pdev->dev, "Failed to get IRQ resource\n"); + return -ENXIO; } fimc->irq = res->start; fimc->num_clocks = MAX_FIMC_CLOCKS; ret = fimc_clk_get(fimc); if (ret) - goto err_regs_unmap; + return ret; clk_set_rate(fimc->clock[CLK_BUS], drv_data->lclk_frequency); clk_enable(fimc->clock[CLK_BUS]); platform_set_drvdata(pdev, fimc); - ret = request_irq(fimc->irq, fimc_irq_handler, 0, pdev->name, fimc); + ret = devm_request_irq(&pdev->dev, fimc->irq, fimc_irq_handler, + 0, pdev->name, fimc); if (ret) { dev_err(&pdev->dev, "failed to install irq (%d)\n", ret); goto err_clk; @@ -1742,7 +1735,7 @@ static int fimc_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) - goto err_irq; + goto err_clk; /* Initialize contiguous memory allocator */ fimc->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); if (IS_ERR(fimc->alloc_ctx)) { @@ -1757,17 +1750,8 @@ static int fimc_probe(struct platform_device *pdev) err_pm: pm_runtime_put(&pdev->dev); -err_irq: - free_irq(fimc->irq, fimc); err_clk: fimc_clk_put(fimc); -err_regs_unmap: - iounmap(fimc->regs); -err_req_region: - release_resource(fimc->regs_res); - kfree(fimc->regs_res); -err_info: - kfree(fimc); return ret; } @@ -1854,11 +1838,6 @@ static int __devexit fimc_remove(struct platform_device *pdev) clk_disable(fimc->clock[CLK_BUS]); fimc_clk_put(fimc); - free_irq(fimc->irq, fimc); - iounmap(fimc->regs); - release_resource(fimc->regs_res); - kfree(fimc->regs_res); - kfree(fimc); dev_info(&pdev->dev, "driver unloaded\n"); return 0; diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index 4e20560c73d4..a18291e648e2 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -434,7 +434,6 @@ struct fimc_ctx; * @num_clocks: the number of clocks managed by this device instance * @clock: clocks required for FIMC operation * @regs: the mapped hardware registers - * @regs_res: the resource claimed for IO registers * @irq: FIMC interrupt number * @irq_queue: interrupt handler waitqueue * @v4l2_dev: root v4l2_device @@ -454,7 +453,6 @@ struct fimc_dev { u16 num_clocks; struct clk *clock[MAX_FIMC_CLOCKS]; void __iomem *regs; - struct resource *regs_res; int irq; wait_queue_head_t irq_queue; struct v4l2_device *v4l2_dev; diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c index 63eccb55728f..62ed37e40149 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c @@ -750,7 +750,7 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) struct fimc_md *fmd; int ret; - fmd = kzalloc(sizeof(struct fimc_md), GFP_KERNEL); + fmd = devm_kzalloc(&pdev->dev, sizeof(*fmd), GFP_KERNEL); if (!fmd) return -ENOMEM; @@ -771,7 +771,7 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) ret = v4l2_device_register(&pdev->dev, &fmd->v4l2_dev); if (ret < 0) { v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret); - goto err1; + return ret; } ret = media_device_register(&fmd->media_dev); if (ret < 0) { @@ -813,8 +813,6 @@ err3: fimc_md_unregister_entities(fmd); err2: v4l2_device_unregister(&fmd->v4l2_dev); -err1: - kfree(fmd); return ret; } @@ -828,7 +826,6 @@ static int __devexit fimc_md_remove(struct platform_device *pdev) fimc_md_unregister_entities(fmd); media_device_unregister(&fmd->media_dev); fimc_md_put_clocks(fmd); - kfree(fmd); return 0; } diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c b/drivers/media/video/s5p-fimc/mipi-csis.c index 130335cf62fd..f44f690397f7 100644 --- a/drivers/media/video/s5p-fimc/mipi-csis.c +++ b/drivers/media/video/s5p-fimc/mipi-csis.c @@ -1,8 +1,8 @@ /* * Samsung S5P/EXYNOS4 SoC series MIPI-CSI receiver driver * - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> + * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki, <s.nawrocki@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -100,7 +100,6 @@ enum { * @pads: CSIS pads array * @sd: v4l2_subdev associated with CSIS device instance * @pdev: CSIS platform device - * @regs_res: requested I/O register memory resource * @regs: mmaped I/O registers memory * @clock: CSIS clocks * @irq: requested s5p-mipi-csis irq number @@ -113,7 +112,6 @@ struct csis_state { struct media_pad pads[CSIS_PADS_NUM]; struct v4l2_subdev sd; struct platform_device *pdev; - struct resource *regs_res; void __iomem *regs; struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES]; struct clk *clock[NUM_CSIS_CLOCKS]; @@ -258,26 +256,36 @@ static void s5pcsis_clk_put(struct csis_state *state) { int i; - for (i = 0; i < NUM_CSIS_CLOCKS; i++) - if (!IS_ERR_OR_NULL(state->clock[i])) - clk_put(state->clock[i]); + for (i = 0; i < NUM_CSIS_CLOCKS; i++) { + if (IS_ERR_OR_NULL(state->clock[i])) + continue; + clk_unprepare(state->clock[i]); + clk_put(state->clock[i]); + state->clock[i] = NULL; + } } static int s5pcsis_clk_get(struct csis_state *state) { struct device *dev = &state->pdev->dev; - int i; + int i, ret; for (i = 0; i < NUM_CSIS_CLOCKS; i++) { state->clock[i] = clk_get(dev, csi_clock_name[i]); - if (IS_ERR(state->clock[i])) { - s5pcsis_clk_put(state); - dev_err(dev, "failed to get clock: %s\n", - csi_clock_name[i]); - return -ENXIO; + if (IS_ERR(state->clock[i])) + goto err; + ret = clk_prepare(state->clock[i]); + if (ret < 0) { + clk_put(state->clock[i]); + state->clock[i] = NULL; + goto err; } } return 0; +err: + s5pcsis_clk_put(state); + dev_err(dev, "failed to get clock: %s\n", csi_clock_name[i]); + return -ENXIO; } static int s5pcsis_s_power(struct v4l2_subdev *sd, int on) @@ -480,12 +488,11 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) { struct s5p_platform_mipi_csis *pdata; struct resource *mem_res; - struct resource *regs_res; struct csis_state *state; int ret = -ENOMEM; int i; - state = kzalloc(sizeof(*state), GFP_KERNEL); + state = devm_kzalloc(&pdev->dev, sizeof(*state), GFP_KERNEL); if (!state) return -ENOMEM; @@ -495,52 +502,27 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (pdata == NULL || pdata->phy_enable == NULL) { dev_err(&pdev->dev, "Platform data not fully specified\n"); - goto e_free; + return -EINVAL; } if ((pdev->id == 1 && pdata->lanes > CSIS1_MAX_LANES) || pdata->lanes > CSIS0_MAX_LANES) { - ret = -EINVAL; dev_err(&pdev->dev, "Unsupported number of data lanes: %d\n", pdata->lanes); - goto e_free; + return -EINVAL; } mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - dev_err(&pdev->dev, "Failed to get IO memory region\n"); - goto e_free; + state->regs = devm_request_and_ioremap(&pdev->dev, mem_res); + if (state->regs == NULL) { + dev_err(&pdev->dev, "Failed to request and remap io memory\n"); + return -ENXIO; } - regs_res = request_mem_region(mem_res->start, resource_size(mem_res), - pdev->name); - if (!regs_res) { - dev_err(&pdev->dev, "Failed to request IO memory region\n"); - goto e_free; - } - state->regs_res = regs_res; - - state->regs = ioremap(mem_res->start, resource_size(mem_res)); - if (!state->regs) { - dev_err(&pdev->dev, "Failed to remap IO region\n"); - goto e_reqmem; - } - - ret = s5pcsis_clk_get(state); - if (ret) - goto e_unmap; - - clk_enable(state->clock[CSIS_CLK_MUX]); - if (pdata->clk_rate) - clk_set_rate(state->clock[CSIS_CLK_MUX], pdata->clk_rate); - else - dev_WARN(&pdev->dev, "No clock frequency specified!\n"); - state->irq = platform_get_irq(pdev, 0); if (state->irq < 0) { - ret = state->irq; dev_err(&pdev->dev, "Failed to get irq\n"); - goto e_clkput; + return state->irq; } for (i = 0; i < CSIS_NUM_SUPPLIES; i++) @@ -549,12 +531,22 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) ret = regulator_bulk_get(&pdev->dev, CSIS_NUM_SUPPLIES, state->supplies); if (ret) + return ret; + + ret = s5pcsis_clk_get(state); + if (ret) goto e_clkput; - ret = request_irq(state->irq, s5pcsis_irq_handler, 0, - dev_name(&pdev->dev), state); + clk_enable(state->clock[CSIS_CLK_MUX]); + if (pdata->clk_rate) + clk_set_rate(state->clock[CSIS_CLK_MUX], pdata->clk_rate); + else + dev_WARN(&pdev->dev, "No clock frequency specified!\n"); + + ret = devm_request_irq(&pdev->dev, state->irq, s5pcsis_irq_handler, + 0, dev_name(&pdev->dev), state); if (ret) { - dev_err(&pdev->dev, "request_irq failed\n"); + dev_err(&pdev->dev, "Interrupt request failed\n"); goto e_regput; } @@ -573,7 +565,7 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) ret = media_entity_init(&state->sd.entity, CSIS_PADS_NUM, state->pads, 0); if (ret < 0) - goto e_irqfree; + goto e_clkput; /* This allows to retrieve the platform device id by the host driver */ v4l2_set_subdevdata(&state->sd, pdev); @@ -582,22 +574,13 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &state->sd); pm_runtime_enable(&pdev->dev); - return 0; -e_irqfree: - free_irq(state->irq, state); e_regput: regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supplies); e_clkput: clk_disable(state->clock[CSIS_CLK_MUX]); s5pcsis_clk_put(state); -e_unmap: - iounmap(state->regs); -e_reqmem: - release_mem_region(regs_res->start, resource_size(regs_res)); -e_free: - kfree(state); return ret; } @@ -699,21 +682,15 @@ static int __devexit s5pcsis_remove(struct platform_device *pdev) { struct v4l2_subdev *sd = platform_get_drvdata(pdev); struct csis_state *state = sd_to_csis_state(sd); - struct resource *res = state->regs_res; pm_runtime_disable(&pdev->dev); - s5pcsis_suspend(&pdev->dev); + s5pcsis_pm_suspend(&pdev->dev, false); clk_disable(state->clock[CSIS_CLK_MUX]); pm_runtime_set_suspended(&pdev->dev); - s5pcsis_clk_put(state); regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supplies); media_entity_cleanup(&state->sd.entity); - free_irq(state->irq, state); - iounmap(state->regs); - release_mem_region(res->start, resource_size(res)); - kfree(state); return 0; } diff --git a/drivers/media/video/s5p-g2d/g2d-hw.c b/drivers/media/video/s5p-g2d/g2d-hw.c index 39937cf03c88..5b86cbe408e2 100644 --- a/drivers/media/video/s5p-g2d/g2d-hw.c +++ b/drivers/media/video/s5p-g2d/g2d-hw.c @@ -77,6 +77,11 @@ void g2d_set_rop4(struct g2d_dev *d, u32 r) w(r, ROP4_REG); } +void g2d_set_flip(struct g2d_dev *d, u32 r) +{ + w(r, SRC_MSK_DIRECT_REG); +} + u32 g2d_cmd_stretch(u32 e) { e &= 1; diff --git a/drivers/media/video/s5p-g2d/g2d.c b/drivers/media/video/s5p-g2d/g2d.c index febaa673d363..789de74014e5 100644 --- a/drivers/media/video/s5p-g2d/g2d.c +++ b/drivers/media/video/s5p-g2d/g2d.c @@ -178,6 +178,9 @@ static int g2d_s_ctrl(struct v4l2_ctrl *ctrl) { struct g2d_ctx *ctx = container_of(ctrl->handler, struct g2d_ctx, ctrl_handler); + unsigned long flags; + + spin_lock_irqsave(&ctx->dev->ctrl_lock, flags); switch (ctrl->id) { case V4L2_CID_COLORFX: if (ctrl->val == V4L2_COLORFX_NEGATIVE) @@ -185,10 +188,13 @@ static int g2d_s_ctrl(struct v4l2_ctrl *ctrl) else ctx->rop = ROP4_COPY; break; - default: - v4l2_err(&ctx->dev->v4l2_dev, "unknown control\n"); - return -EINVAL; + + case V4L2_CID_HFLIP: + ctx->flip = ctx->ctrl_hflip->val | (ctx->ctrl_vflip->val << 1); + break; + } + spin_unlock_irqrestore(&ctx->dev->ctrl_lock, flags); return 0; } @@ -200,11 +206,13 @@ int g2d_setup_ctrls(struct g2d_ctx *ctx) { struct g2d_dev *dev = ctx->dev; - v4l2_ctrl_handler_init(&ctx->ctrl_handler, 1); - if (ctx->ctrl_handler.error) { - v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n"); - return ctx->ctrl_handler.error; - } + v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3); + + ctx->ctrl_hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, &g2d_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + + ctx->ctrl_vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, &g2d_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); v4l2_ctrl_new_std_menu( &ctx->ctrl_handler, @@ -215,10 +223,14 @@ int g2d_setup_ctrls(struct g2d_ctx *ctx) V4L2_COLORFX_NONE); if (ctx->ctrl_handler.error) { - v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n"); - return ctx->ctrl_handler.error; + int err = ctx->ctrl_handler.error; + v4l2_err(&dev->v4l2_dev, "g2d_setup_ctrls failed\n"); + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + return err; } + v4l2_ctrl_cluster(2, &ctx->ctrl_hflip); + return 0; } @@ -547,6 +559,7 @@ static void device_run(void *prv) struct g2d_ctx *ctx = prv; struct g2d_dev *dev = ctx->dev; struct vb2_buffer *src, *dst; + unsigned long flags; u32 cmd = 0; dev->curr = ctx; @@ -557,6 +570,8 @@ static void device_run(void *prv) clk_enable(dev->gate); g2d_reset(dev); + spin_lock_irqsave(&dev->ctrl_lock, flags); + g2d_set_src_size(dev, &ctx->in); g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(src, 0)); @@ -564,11 +579,15 @@ static void device_run(void *prv) g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(dst, 0)); g2d_set_rop4(dev, ctx->rop); + g2d_set_flip(dev, ctx->flip); + if (ctx->in.c_width != ctx->out.c_width || ctx->in.c_height != ctx->out.c_height) cmd |= g2d_cmd_stretch(1); g2d_set_cmd(dev, cmd); g2d_start(dev); + + spin_unlock_irqrestore(&dev->ctrl_lock, flags); } static irqreturn_t g2d_isr(int irq, void *prv) @@ -658,7 +677,7 @@ static int g2d_probe(struct platform_device *pdev) dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; - spin_lock_init(&dev->irqlock); + spin_lock_init(&dev->ctrl_lock); mutex_init(&dev->mutex); atomic_set(&dev->num_inst, 0); init_waitqueue_head(&dev->irq_queue); @@ -693,18 +712,30 @@ static int g2d_probe(struct platform_device *pdev) goto unmap_regs; } + ret = clk_prepare(dev->clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare g2d clock\n"); + goto put_clk; + } + dev->gate = clk_get(&pdev->dev, "fimg2d"); if (IS_ERR_OR_NULL(dev->gate)) { dev_err(&pdev->dev, "failed to get g2d clock gate\n"); ret = -ENXIO; - goto put_clk; + goto unprep_clk; + } + + ret = clk_prepare(dev->gate); + if (ret) { + dev_err(&pdev->dev, "failed to prepare g2d clock gate\n"); + goto put_clk_gate; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { dev_err(&pdev->dev, "failed to find IRQ\n"); ret = -ENXIO; - goto put_clk_gate; + goto unprep_clk_gate; } dev->irq = res->start; @@ -764,8 +795,12 @@ alloc_ctx_cleanup: vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); rel_irq: free_irq(dev->irq, dev); +unprep_clk_gate: + clk_unprepare(dev->gate); put_clk_gate: clk_put(dev->gate); +unprep_clk: + clk_unprepare(dev->clk); put_clk: clk_put(dev->clk); unmap_regs: @@ -787,7 +822,9 @@ static int g2d_remove(struct platform_device *pdev) v4l2_device_unregister(&dev->v4l2_dev); vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); free_irq(dev->irq, dev); + clk_unprepare(dev->gate); clk_put(dev->gate); + clk_unprepare(dev->clk); clk_put(dev->clk); iounmap(dev->regs); release_resource(dev->res_regs); diff --git a/drivers/media/video/s5p-g2d/g2d.h b/drivers/media/video/s5p-g2d/g2d.h index 5eae90107bf8..1b82065aeaef 100644 --- a/drivers/media/video/s5p-g2d/g2d.h +++ b/drivers/media/video/s5p-g2d/g2d.h @@ -20,7 +20,7 @@ struct g2d_dev { struct v4l2_m2m_dev *m2m_dev; struct video_device *vfd; struct mutex mutex; - spinlock_t irqlock; + spinlock_t ctrl_lock; atomic_t num_inst; struct vb2_alloc_ctx *alloc_ctx; struct resource *res_regs; @@ -57,8 +57,11 @@ struct g2d_ctx { struct v4l2_m2m_ctx *m2m_ctx; struct g2d_frame in; struct g2d_frame out; + struct v4l2_ctrl *ctrl_hflip; + struct v4l2_ctrl *ctrl_vflip; struct v4l2_ctrl_handler ctrl_handler; u32 rop; + u32 flip; }; struct g2d_fmt { @@ -77,6 +80,7 @@ void g2d_set_dst_addr(struct g2d_dev *d, dma_addr_t a); void g2d_start(struct g2d_dev *d); void g2d_clear_int(struct g2d_dev *d); void g2d_set_rop4(struct g2d_dev *d, u32 r); +void g2d_set_flip(struct g2d_dev *d, u32 r); u32 g2d_cmd_stretch(u32 e); void g2d_set_cmd(struct g2d_dev *d, u32 c); diff --git a/drivers/media/video/s5p-jpeg/jpeg-core.c b/drivers/media/video/s5p-jpeg/jpeg-core.c index 1105a8749c8b..5a49c307f9c1 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-core.c +++ b/drivers/media/video/s5p-jpeg/jpeg-core.c @@ -32,10 +32,9 @@ static struct s5p_jpeg_fmt formats_enc[] = { { - .name = "YUV 4:2:0 planar, YCbCr", - .fourcc = V4L2_PIX_FMT_YUV420, - .depth = 12, - .colplanes = 3, + .name = "JPEG JFIF", + .fourcc = V4L2_PIX_FMT_JPEG, + .colplanes = 1, .types = MEM2MEM_CAPTURE, }, { @@ -43,7 +42,7 @@ static struct s5p_jpeg_fmt formats_enc[] = { .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .colplanes = 1, - .types = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT, + .types = MEM2MEM_OUTPUT, }, { .name = "RGB565", @@ -203,6 +202,16 @@ static const unsigned char hactblg0[162] = { 0xf9, 0xfa }; +static inline struct s5p_jpeg_ctx *ctrl_to_ctx(struct v4l2_ctrl *c) +{ + return container_of(c->handler, struct s5p_jpeg_ctx, ctrl_handler); +} + +static inline struct s5p_jpeg_ctx *fh_to_ctx(struct v4l2_fh *fh) +{ + return container_of(fh, struct s5p_jpeg_ctx, fh); +} + static inline void jpeg_set_qtbl(void __iomem *regs, const unsigned char *qtbl, unsigned long tab, int len) { @@ -269,6 +278,7 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq); static struct s5p_jpeg_fmt *s5p_jpeg_find_format(unsigned int mode, __u32 pixelformat); +static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx); static int s5p_jpeg_open(struct file *file) { @@ -276,12 +286,18 @@ static int s5p_jpeg_open(struct file *file) struct video_device *vfd = video_devdata(file); struct s5p_jpeg_ctx *ctx; struct s5p_jpeg_fmt *out_fmt; + int ret = 0; ctx = kzalloc(sizeof *ctx, GFP_KERNEL); if (!ctx) return -ENOMEM; - file->private_data = ctx; + v4l2_fh_init(&ctx->fh, vfd); + /* Use separate control handler per file handle */ + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + ctx->jpeg = jpeg; if (vfd == jpeg->vfd_encoder) { ctx->mode = S5P_JPEG_ENCODE; @@ -291,24 +307,35 @@ static int s5p_jpeg_open(struct file *file) out_fmt = s5p_jpeg_find_format(ctx->mode, V4L2_PIX_FMT_JPEG); } + ret = s5p_jpeg_controls_create(ctx); + if (ret < 0) + goto error; + ctx->m2m_ctx = v4l2_m2m_ctx_init(jpeg->m2m_dev, ctx, queue_init); if (IS_ERR(ctx->m2m_ctx)) { - int err = PTR_ERR(ctx->m2m_ctx); - kfree(ctx); - return err; + ret = PTR_ERR(ctx->m2m_ctx); + goto error; } ctx->out_q.fmt = out_fmt; ctx->cap_q.fmt = s5p_jpeg_find_format(ctx->mode, V4L2_PIX_FMT_YUYV); - return 0; + +error: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + return ret; } static int s5p_jpeg_release(struct file *file) { - struct s5p_jpeg_ctx *ctx = file->private_data; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); v4l2_m2m_ctx_release(ctx->m2m_ctx); + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); kfree(ctx); return 0; @@ -317,14 +344,14 @@ static int s5p_jpeg_release(struct file *file) static unsigned int s5p_jpeg_poll(struct file *file, struct poll_table_struct *wait) { - struct s5p_jpeg_ctx *ctx = file->private_data; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); } static int s5p_jpeg_mmap(struct file *file, struct vm_area_struct *vma) { - struct s5p_jpeg_ctx *ctx = file->private_data; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); } @@ -448,7 +475,7 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, static int s5p_jpeg_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (ctx->mode == S5P_JPEG_ENCODE) { strlcpy(cap->driver, S5P_JPEG_M2M_NAME " encoder", @@ -497,9 +524,7 @@ static int enum_fmt(struct s5p_jpeg_fmt *formats, int n, static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - struct s5p_jpeg_ctx *ctx; - - ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (ctx->mode == S5P_JPEG_ENCODE) return enum_fmt(formats_enc, NUM_FORMATS_ENC, f, @@ -511,9 +536,7 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv, static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - struct s5p_jpeg_ctx *ctx; - - ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (ctx->mode == S5P_JPEG_ENCODE) return enum_fmt(formats_enc, NUM_FORMATS_ENC, f, @@ -538,7 +561,7 @@ static int s5p_jpeg_g_fmt(struct file *file, void *priv, struct v4l2_format *f) struct vb2_queue *vq; struct s5p_jpeg_q_data *q_data = NULL; struct v4l2_pix_format *pix = &f->fmt.pix; - struct s5p_jpeg_ctx *ct = priv; + struct s5p_jpeg_ctx *ct = fh_to_ctx(priv); vq = v4l2_m2m_get_vq(ct->m2m_ctx, f->type); if (!vq) @@ -659,8 +682,8 @@ static int vidioc_try_fmt(struct v4l2_format *f, struct s5p_jpeg_fmt *fmt, static int s5p_jpeg_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); struct s5p_jpeg_fmt *fmt; - struct s5p_jpeg_ctx *ctx = priv; fmt = s5p_jpeg_find_format(ctx->mode, f->fmt.pix.pixelformat); if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) { @@ -676,8 +699,8 @@ static int s5p_jpeg_try_fmt_vid_cap(struct file *file, void *priv, static int s5p_jpeg_try_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f) { + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); struct s5p_jpeg_fmt *fmt; - struct s5p_jpeg_ctx *ctx = priv; fmt = s5p_jpeg_find_format(ctx->mode, f->fmt.pix.pixelformat); if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) { @@ -728,7 +751,7 @@ static int s5p_jpeg_s_fmt_vid_cap(struct file *file, void *priv, if (ret) return ret; - return s5p_jpeg_s_fmt(priv, f); + return s5p_jpeg_s_fmt(fh_to_ctx(priv), f); } static int s5p_jpeg_s_fmt_vid_out(struct file *file, void *priv, @@ -740,13 +763,13 @@ static int s5p_jpeg_s_fmt_vid_out(struct file *file, void *priv, if (ret) return ret; - return s5p_jpeg_s_fmt(priv, f); + return s5p_jpeg_s_fmt(fh_to_ctx(priv), f); } static int s5p_jpeg_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *reqbufs) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); } @@ -754,14 +777,14 @@ static int s5p_jpeg_reqbufs(struct file *file, void *priv, static int s5p_jpeg_querybuf(struct file *file, void *priv, struct v4l2_buffer *buf) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); } static int s5p_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); } @@ -769,7 +792,7 @@ static int s5p_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) static int s5p_jpeg_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); } @@ -777,7 +800,7 @@ static int s5p_jpeg_dqbuf(struct file *file, void *priv, static int s5p_jpeg_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); } @@ -785,7 +808,7 @@ static int s5p_jpeg_streamon(struct file *file, void *priv, static int s5p_jpeg_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); } @@ -793,7 +816,7 @@ static int s5p_jpeg_streamoff(struct file *file, void *priv, int s5p_jpeg_g_selection(struct file *file, void *priv, struct v4l2_selection *s) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) @@ -822,33 +845,89 @@ int s5p_jpeg_g_selection(struct file *file, void *priv, return 0; } -static int s5p_jpeg_g_jpegcomp(struct file *file, void *priv, - struct v4l2_jpegcompression *compr) +/* + * V4L2 controls + */ + +static int s5p_jpeg_g_volatile_ctrl(struct v4l2_ctrl *ctrl) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = ctrl_to_ctx(ctrl); + struct s5p_jpeg *jpeg = ctx->jpeg; + unsigned long flags; - if (ctx->mode == S5P_JPEG_DECODE) - return -ENOTTY; + switch (ctrl->id) { + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: + spin_lock_irqsave(&jpeg->slock, flags); - memset(compr, 0, sizeof(*compr)); - compr->quality = ctx->compr_quality; + WARN_ON(ctx->subsampling > S5P_SUBSAMPLING_MODE_GRAY); + if (ctx->subsampling > 2) + ctrl->val = V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY; + else + ctrl->val = ctx->subsampling; + spin_unlock_irqrestore(&jpeg->slock, flags); + break; + } return 0; } -static int s5p_jpeg_s_jpegcomp(struct file *file, void *priv, - struct v4l2_jpegcompression *compr) +static int s5p_jpeg_s_ctrl(struct v4l2_ctrl *ctrl) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = ctrl_to_ctx(ctrl); + unsigned long flags; - if (ctx->mode == S5P_JPEG_DECODE) - return -ENOTTY; + spin_lock_irqsave(&ctx->jpeg->slock, flags); - compr->quality = clamp(compr->quality, S5P_JPEG_COMPR_QUAL_BEST, - S5P_JPEG_COMPR_QUAL_WORST); + switch (ctrl->id) { + case V4L2_CID_JPEG_COMPRESSION_QUALITY: + ctx->compr_quality = S5P_JPEG_COMPR_QUAL_WORST - ctrl->val; + break; + case V4L2_CID_JPEG_RESTART_INTERVAL: + ctx->restart_interval = ctrl->val; + break; + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: + ctx->subsampling = ctrl->val; + break; + } - ctx->compr_quality = S5P_JPEG_COMPR_QUAL_WORST - compr->quality; + spin_unlock_irqrestore(&ctx->jpeg->slock, flags); + return 0; +} + +static const struct v4l2_ctrl_ops s5p_jpeg_ctrl_ops = { + .g_volatile_ctrl = s5p_jpeg_g_volatile_ctrl, + .s_ctrl = s5p_jpeg_s_ctrl, +}; +static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx) +{ + unsigned int mask = ~0x27; /* 444, 422, 420, GRAY */ + struct v4l2_ctrl *ctrl; + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3); + + if (ctx->mode == S5P_JPEG_ENCODE) { + v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, + 0, 3, 1, 3); + + v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops, + V4L2_CID_JPEG_RESTART_INTERVAL, + 0, 3, 0xffff, 0); + mask = ~0x06; /* 422, 420 */ + } + + ctrl = v4l2_ctrl_new_std_menu(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops, + V4L2_CID_JPEG_CHROMA_SUBSAMPLING, + V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY, mask, + V4L2_JPEG_CHROMA_SUBSAMPLING_422); + + if (ctx->ctrl_handler.error) + return ctx->ctrl_handler.error; + + if (ctx->mode == S5P_JPEG_DECODE) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE | + V4L2_CTRL_FLAG_READ_ONLY; return 0; } @@ -877,9 +956,6 @@ static const struct v4l2_ioctl_ops s5p_jpeg_ioctl_ops = { .vidioc_streamoff = s5p_jpeg_streamoff, .vidioc_g_selection = s5p_jpeg_g_selection, - - .vidioc_g_jpegcomp = s5p_jpeg_g_jpegcomp, - .vidioc_s_jpegcomp = s5p_jpeg_s_jpegcomp, }; /* @@ -908,13 +984,8 @@ static void s5p_jpeg_device_run(void *priv) jpeg_input_raw_mode(jpeg->regs, S5P_JPEG_RAW_IN_565); else jpeg_input_raw_mode(jpeg->regs, S5P_JPEG_RAW_IN_422); - if (ctx->cap_q.fmt->fourcc == V4L2_PIX_FMT_YUYV) - jpeg_subsampling_mode(jpeg->regs, - S5P_JPEG_SUBSAMPLING_422); - else - jpeg_subsampling_mode(jpeg->regs, - S5P_JPEG_SUBSAMPLING_420); - jpeg_dri(jpeg->regs, 0); + jpeg_subsampling_mode(jpeg->regs, ctx->subsampling); + jpeg_dri(jpeg->regs, ctx->restart_interval); jpeg_x(jpeg->regs, ctx->out_q.w); jpeg_y(jpeg->regs, ctx->out_q.h); jpeg_imgadr(jpeg->regs, src_addr); @@ -953,14 +1024,18 @@ static void s5p_jpeg_device_run(void *priv) jpeg_htbl_dc(jpeg->regs, 2); jpeg_htbl_ac(jpeg->regs, 3); jpeg_htbl_dc(jpeg->regs, 3); - } else { + } else { /* S5P_JPEG_DECODE */ jpeg_rst_int_enable(jpeg->regs, true); jpeg_data_num_int_enable(jpeg->regs, true); jpeg_final_mcu_num_int_enable(jpeg->regs, true); - jpeg_outform_raw(jpeg->regs, S5P_JPEG_RAW_OUT_422); + if (ctx->cap_q.fmt->fourcc == V4L2_PIX_FMT_YUYV) + jpeg_outform_raw(jpeg->regs, S5P_JPEG_RAW_OUT_422); + else + jpeg_outform_raw(jpeg->regs, S5P_JPEG_RAW_OUT_420); jpeg_jpgadr(jpeg->regs, src_addr); jpeg_imgadr(jpeg->regs, dst_addr); } + jpeg_start(jpeg->regs); } @@ -1162,6 +1237,8 @@ static irqreturn_t s5p_jpeg_irq(int irq, void *dev_id) bool timer_elapsed = false; bool op_completed = false; + spin_lock(&jpeg->slock); + curr_ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev); src_buf = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); @@ -1192,6 +1269,9 @@ static irqreturn_t s5p_jpeg_irq(int irq, void *dev_id) v4l2_m2m_buf_done(dst_buf, state); v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->m2m_ctx); + curr_ctx->subsampling = jpeg_get_subsampling_mode(jpeg->regs); + spin_unlock(&jpeg->slock); + jpeg_clear_int(jpeg->regs); return IRQ_HANDLED; @@ -1215,6 +1295,7 @@ static int s5p_jpeg_probe(struct platform_device *pdev) return -ENOMEM; mutex_init(&jpeg->lock); + spin_lock_init(&jpeg->slock); jpeg->dev = &pdev->dev; /* memory-mapped registers */ diff --git a/drivers/media/video/s5p-jpeg/jpeg-core.h b/drivers/media/video/s5p-jpeg/jpeg-core.h index facad6114f5e..38d7367f7a6d 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-core.h +++ b/drivers/media/video/s5p-jpeg/jpeg-core.h @@ -14,6 +14,8 @@ #define JPEG_CORE_H_ #include <media/v4l2-device.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> #define S5P_JPEG_M2M_NAME "s5p-jpeg" @@ -47,6 +49,7 @@ /** * struct s5p_jpeg - JPEG IP abstraction * @lock: the mutex protecting this structure + * @slock: spinlock protecting the device contexts * @v4l2_dev: v4l2 device for mem2mem mode * @vfd_encoder: video device node for encoder mem2mem mode * @vfd_decoder: video device node for decoder mem2mem mode @@ -60,6 +63,7 @@ */ struct s5p_jpeg { struct mutex lock; + struct spinlock slock; struct v4l2_device v4l2_dev; struct video_device *vfd_encoder; @@ -117,15 +121,20 @@ struct s5p_jpeg_q_data { * @out_q: source (output) queue information * @cap_fmt: destination (capture) queue queue information * @hdr_parsed: set if header has been parsed during decompression + * @ctrl_handler: controls handler */ struct s5p_jpeg_ctx { struct s5p_jpeg *jpeg; unsigned int mode; - unsigned int compr_quality; + unsigned short compr_quality; + unsigned short restart_interval; + unsigned short subsampling; struct v4l2_m2m_ctx *m2m_ctx; struct s5p_jpeg_q_data out_q; struct s5p_jpeg_q_data cap_q; + struct v4l2_fh fh; bool hdr_parsed; + struct v4l2_ctrl_handler ctrl_handler; }; /** diff --git a/drivers/media/video/s5p-jpeg/jpeg-hw.h b/drivers/media/video/s5p-jpeg/jpeg-hw.h index e10c744e9f23..f12f0fdbde7c 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-hw.h +++ b/drivers/media/video/s5p-jpeg/jpeg-hw.h @@ -13,6 +13,7 @@ #define JPEG_HW_H_ #include <linux/io.h> +#include <linux/videodev2.h> #include "jpeg-hw.h" #include "jpeg-regs.h" @@ -25,8 +26,6 @@ #define S5P_JPEG_DECODE 1 #define S5P_JPEG_RAW_IN_565 0 #define S5P_JPEG_RAW_IN_422 1 -#define S5P_JPEG_SUBSAMPLING_422 0 -#define S5P_JPEG_SUBSAMPLING_420 1 #define S5P_JPEG_RAW_OUT_422 0 #define S5P_JPEG_RAW_OUT_420 1 @@ -91,21 +90,26 @@ static inline void jpeg_proc_mode(void __iomem *regs, unsigned long mode) writel(reg, regs + S5P_JPGMOD); } -static inline void jpeg_subsampling_mode(void __iomem *regs, unsigned long mode) +static inline void jpeg_subsampling_mode(void __iomem *regs, unsigned int mode) { unsigned long reg, m; - m = S5P_SUBSAMPLING_MODE_422; - if (mode == S5P_JPEG_SUBSAMPLING_422) - m = S5P_SUBSAMPLING_MODE_422; - else if (mode == S5P_JPEG_SUBSAMPLING_420) + if (mode == V4L2_JPEG_CHROMA_SUBSAMPLING_420) m = S5P_SUBSAMPLING_MODE_420; + else + m = S5P_SUBSAMPLING_MODE_422; + reg = readl(regs + S5P_JPGMOD); reg &= ~S5P_SUBSAMPLING_MODE_MASK; reg |= m; writel(reg, regs + S5P_JPGMOD); } +static inline unsigned int jpeg_get_subsampling_mode(void __iomem *regs) +{ + return readl(regs + S5P_JPGMOD) & S5P_SUBSAMPLING_MODE_MASK; +} + static inline void jpeg_dri(void __iomem *regs, unsigned int dri) { unsigned long reg; diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c index f6a3035c4fb7..738a607be43c 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c @@ -41,15 +41,29 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) pm->clock_gate = clk_get(&dev->plat_dev->dev, MFC_GATE_CLK_NAME); if (IS_ERR(pm->clock_gate)) { mfc_err("Failed to get clock-gating control\n"); - ret = -ENOENT; + ret = PTR_ERR(pm->clock_gate); goto err_g_ip_clk; } + + ret = clk_prepare(pm->clock_gate); + if (ret) { + mfc_err("Failed to preapre clock-gating control\n"); + goto err_p_ip_clk; + } + pm->clock = clk_get(&dev->plat_dev->dev, MFC_CLKNAME); if (IS_ERR(pm->clock)) { mfc_err("Failed to get MFC clock\n"); - ret = -ENOENT; + ret = PTR_ERR(pm->clock); goto err_g_ip_clk_2; } + + ret = clk_prepare(pm->clock); + if (ret) { + mfc_err("Failed to prepare MFC clock\n"); + goto err_p_ip_clk_2; + } + atomic_set(&pm->power, 0); #ifdef CONFIG_PM_RUNTIME pm->device = &dev->plat_dev->dev; @@ -59,7 +73,11 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) atomic_set(&clk_ref, 0); #endif return 0; +err_p_ip_clk_2: + clk_put(pm->clock); err_g_ip_clk_2: + clk_unprepare(pm->clock_gate); +err_p_ip_clk: clk_put(pm->clock_gate); err_g_ip_clk: return ret; @@ -67,7 +85,9 @@ err_g_ip_clk: void s5p_mfc_final_pm(struct s5p_mfc_dev *dev) { + clk_unprepare(pm->clock_gate); clk_put(pm->clock_gate); + clk_unprepare(pm->clock); clk_put(pm->clock); #ifdef CONFIG_PM_RUNTIME pm_runtime_disable(pm->device); diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/video/s5p-tv/Kconfig index f2a09779ec8f..f248b2856720 100644 --- a/drivers/media/video/s5p-tv/Kconfig +++ b/drivers/media/video/s5p-tv/Kconfig @@ -46,6 +46,16 @@ config VIDEO_SAMSUNG_S5P_HDMIPHY as module. It is an I2C driver, that exposes a V4L2 subdev for use by other drivers. +config VIDEO_SAMSUNG_S5P_SII9234 + tristate "Samsung SII9234 Driver" + depends on VIDEO_DEV && VIDEO_V4L2 && I2C + depends on VIDEO_SAMSUNG_S5P_TV + help + Say Y here if you want support for the MHL interface + in S5P Samsung SoC. The driver can be compiled + as module. It is an I2C driver, that exposes a V4L2 + subdev for use by other drivers. + config VIDEO_SAMSUNG_S5P_SDO tristate "Samsung Analog TV Driver" depends on VIDEO_DEV && VIDEO_V4L2 diff --git a/drivers/media/video/s5p-tv/Makefile b/drivers/media/video/s5p-tv/Makefile index 37e4c17663b4..f49e756a2fde 100644 --- a/drivers/media/video/s5p-tv/Makefile +++ b/drivers/media/video/s5p-tv/Makefile @@ -8,6 +8,8 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o s5p-hdmiphy-y += hdmiphy_drv.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SII9234) += s5p-sii9234.o +s5p-sii9234-y += sii9234_drv.o obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o s5p-hdmi-y += hdmi_drv.o obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/video/s5p-tv/hdmi_drv.c index 8b41a0410ab1..4865d25a0e57 100644 --- a/drivers/media/video/s5p-tv/hdmi_drv.c +++ b/drivers/media/video/s5p-tv/hdmi_drv.c @@ -30,6 +30,7 @@ #include <linux/clk.h> #include <linux/regulator/consumer.h> +#include <media/s5p_hdmi.h> #include <media/v4l2-common.h> #include <media/v4l2-dev.h> #include <media/v4l2-device.h> @@ -66,6 +67,8 @@ struct hdmi_device { struct v4l2_device v4l2_dev; /** subdev of HDMIPHY interface */ struct v4l2_subdev *phy_sd; + /** subdev of MHL interface */ + struct v4l2_subdev *mhl_sd; /** configuration of current graphic mode */ const struct hdmi_preset_conf *cur_conf; /** current preset */ @@ -74,10 +77,6 @@ struct hdmi_device { struct hdmi_resources res; }; -struct hdmi_driver_data { - int hdmiphy_bus; -}; - struct hdmi_tg_regs { u8 cmd; u8 h_fsz_l; @@ -129,23 +128,11 @@ struct hdmi_preset_conf { struct v4l2_mbus_framefmt mbus_fmt; }; -/* I2C module and id for HDMIPHY */ -static struct i2c_board_info hdmiphy_info = { - I2C_BOARD_INFO("hdmiphy", 0x38), -}; - -static struct hdmi_driver_data hdmi_driver_data[] = { - { .hdmiphy_bus = 3 }, - { .hdmiphy_bus = 8 }, -}; - static struct platform_device_id hdmi_driver_types[] = { { .name = "s5pv210-hdmi", - .driver_data = (unsigned long)&hdmi_driver_data[0], }, { .name = "exynos4-hdmi", - .driver_data = (unsigned long)&hdmi_driver_data[1], }, { /* end node */ } @@ -587,7 +574,15 @@ static int hdmi_streamon(struct hdmi_device *hdev) if (tries == 0) { dev_err(dev, "hdmiphy's pll could not reach steady state.\n"); v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); - hdmi_dumpregs(hdev, "s_stream"); + hdmi_dumpregs(hdev, "hdmiphy - s_stream"); + return -EIO; + } + + /* starting MHL */ + ret = v4l2_subdev_call(hdev->mhl_sd, video, s_stream, 1); + if (hdev->mhl_sd && ret) { + v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); + hdmi_dumpregs(hdev, "mhl - s_stream"); return -EIO; } @@ -618,6 +613,7 @@ static int hdmi_streamoff(struct hdmi_device *hdev) clk_set_parent(res->sclk_hdmi, res->sclk_pixel); clk_enable(res->sclk_hdmi); + v4l2_subdev_call(hdev->mhl_sd, video, s_stream, 0); v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); hdmi_dumpregs(hdev, "streamoff"); @@ -739,6 +735,7 @@ static int hdmi_runtime_suspend(struct device *dev) struct hdmi_device *hdev = sd_to_hdmi_dev(sd); dev_dbg(dev, "%s\n", __func__); + v4l2_subdev_call(hdev->mhl_sd, core, s_power, 0); hdmi_resource_poweroff(&hdev->res); return 0; } @@ -757,6 +754,11 @@ static int hdmi_runtime_resume(struct device *dev) if (ret) goto fail; + /* starting MHL */ + ret = v4l2_subdev_call(hdev->mhl_sd, core, s_power, 1); + if (hdev->mhl_sd && ret) + goto fail; + dev_dbg(dev, "poweron succeed\n"); return 0; @@ -867,15 +869,21 @@ static int __devinit hdmi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *res; - struct i2c_adapter *phy_adapter; + struct i2c_adapter *adapter; struct v4l2_subdev *sd; struct hdmi_device *hdmi_dev = NULL; - struct hdmi_driver_data *drv_data; + struct s5p_hdmi_platform_data *pdata = dev->platform_data; int ret; dev_dbg(dev, "probe start\n"); - hdmi_dev = kzalloc(sizeof(*hdmi_dev), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "platform data is missing\n"); + ret = -ENODEV; + goto fail; + } + + hdmi_dev = devm_kzalloc(&pdev->dev, sizeof(*hdmi_dev), GFP_KERNEL); if (!hdmi_dev) { dev_err(dev, "out of memory\n"); ret = -ENOMEM; @@ -886,7 +894,7 @@ static int __devinit hdmi_probe(struct platform_device *pdev) ret = hdmi_resources_init(hdmi_dev); if (ret) - goto fail_hdev; + goto fail; /* mapping HDMI registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -896,24 +904,26 @@ static int __devinit hdmi_probe(struct platform_device *pdev) goto fail_init; } - hdmi_dev->regs = ioremap(res->start, resource_size(res)); + hdmi_dev->regs = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (hdmi_dev->regs == NULL) { dev_err(dev, "register mapping failed.\n"); ret = -ENXIO; - goto fail_hdev; + goto fail_init; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { dev_err(dev, "get interrupt resource failed.\n"); ret = -ENXIO; - goto fail_regs; + goto fail_init; } - ret = request_irq(res->start, hdmi_irq_handler, 0, "hdmi", hdmi_dev); + ret = devm_request_irq(&pdev->dev, res->start, hdmi_irq_handler, 0, + "hdmi", hdmi_dev); if (ret) { dev_err(dev, "request interrupt failed.\n"); - goto fail_regs; + goto fail_init; } hdmi_dev->irq = res->start; @@ -924,28 +934,54 @@ static int __devinit hdmi_probe(struct platform_device *pdev) ret = v4l2_device_register(NULL, &hdmi_dev->v4l2_dev); if (ret) { dev_err(dev, "could not register v4l2 device.\n"); - goto fail_irq; + goto fail_init; } - drv_data = (struct hdmi_driver_data *) - platform_get_device_id(pdev)->driver_data; - phy_adapter = i2c_get_adapter(drv_data->hdmiphy_bus); - if (phy_adapter == NULL) { - dev_err(dev, "adapter request failed\n"); + /* testing if hdmiphy info is present */ + if (!pdata->hdmiphy_info) { + dev_err(dev, "hdmiphy info is missing in platform data\n"); + ret = -ENXIO; + goto fail_vdev; + } + + adapter = i2c_get_adapter(pdata->hdmiphy_bus); + if (adapter == NULL) { + dev_err(dev, "hdmiphy adapter request failed\n"); ret = -ENXIO; goto fail_vdev; } hdmi_dev->phy_sd = v4l2_i2c_new_subdev_board(&hdmi_dev->v4l2_dev, - phy_adapter, &hdmiphy_info, NULL); + adapter, pdata->hdmiphy_info, NULL); /* on failure or not adapter is no longer useful */ - i2c_put_adapter(phy_adapter); + i2c_put_adapter(adapter); if (hdmi_dev->phy_sd == NULL) { dev_err(dev, "missing subdev for hdmiphy\n"); ret = -ENODEV; goto fail_vdev; } + /* initialization of MHL interface if present */ + if (pdata->mhl_info) { + adapter = i2c_get_adapter(pdata->mhl_bus); + if (adapter == NULL) { + dev_err(dev, "MHL adapter request failed\n"); + ret = -ENXIO; + goto fail_vdev; + } + + hdmi_dev->mhl_sd = v4l2_i2c_new_subdev_board( + &hdmi_dev->v4l2_dev, adapter, + pdata->mhl_info, NULL); + /* on failure or not adapter is no longer useful */ + i2c_put_adapter(adapter); + if (hdmi_dev->mhl_sd == NULL) { + dev_err(dev, "missing subdev for MHL\n"); + ret = -ENODEV; + goto fail_vdev; + } + } + clk_enable(hdmi_dev->res.hdmi); pm_runtime_enable(dev); @@ -962,25 +998,16 @@ static int __devinit hdmi_probe(struct platform_device *pdev) /* storing subdev for call that have only access to struct device */ dev_set_drvdata(dev, sd); - dev_info(dev, "probe sucessful\n"); + dev_info(dev, "probe successful\n"); return 0; fail_vdev: v4l2_device_unregister(&hdmi_dev->v4l2_dev); -fail_irq: - free_irq(hdmi_dev->irq, hdmi_dev); - -fail_regs: - iounmap(hdmi_dev->regs); - fail_init: hdmi_resources_cleanup(hdmi_dev); -fail_hdev: - kfree(hdmi_dev); - fail: dev_err(dev, "probe failed\n"); return ret; @@ -996,11 +1023,8 @@ static int __devexit hdmi_remove(struct platform_device *pdev) clk_disable(hdmi_dev->res.hdmi); v4l2_device_unregister(&hdmi_dev->v4l2_dev); disable_irq(hdmi_dev->irq); - free_irq(hdmi_dev->irq, hdmi_dev); - iounmap(hdmi_dev->regs); hdmi_resources_cleanup(hdmi_dev); - kfree(hdmi_dev); - dev_info(dev, "remove sucessful\n"); + dev_info(dev, "remove successful\n"); return 0; } diff --git a/drivers/media/video/s5p-tv/hdmiphy_drv.c b/drivers/media/video/s5p-tv/hdmiphy_drv.c index 6693f4aff108..0afef77747e5 100644 --- a/drivers/media/video/s5p-tv/hdmiphy_drv.c +++ b/drivers/media/video/s5p-tv/hdmiphy_drv.c @@ -175,14 +175,4 @@ static struct i2c_driver hdmiphy_driver = { .id_table = hdmiphy_id, }; -static int __init hdmiphy_init(void) -{ - return i2c_add_driver(&hdmiphy_driver); -} -module_init(hdmiphy_init); - -static void __exit hdmiphy_exit(void) -{ - i2c_del_driver(&hdmiphy_driver); -} -module_exit(hdmiphy_exit); +module_i2c_driver(hdmiphy_driver); diff --git a/drivers/media/video/s5p-tv/mixer_drv.c b/drivers/media/video/s5p-tv/mixer_drv.c index 00643094b221..a2c0c25ad130 100644 --- a/drivers/media/video/s5p-tv/mixer_drv.c +++ b/drivers/media/video/s5p-tv/mixer_drv.c @@ -444,7 +444,7 @@ static int __devexit mxr_remove(struct platform_device *pdev) kfree(mdev); - dev_info(dev, "remove sucessful\n"); + dev_info(dev, "remove successful\n"); return 0; } diff --git a/drivers/media/video/s5p-tv/sdo_drv.c b/drivers/media/video/s5p-tv/sdo_drv.c index 059e7749ce95..f6bca2c20e89 100644 --- a/drivers/media/video/s5p-tv/sdo_drv.c +++ b/drivers/media/video/s5p-tv/sdo_drv.c @@ -301,7 +301,7 @@ static int __devinit sdo_probe(struct platform_device *pdev) struct clk *sclk_vpll; dev_info(dev, "probe start\n"); - sdev = kzalloc(sizeof *sdev, GFP_KERNEL); + sdev = devm_kzalloc(&pdev->dev, sizeof *sdev, GFP_KERNEL); if (!sdev) { dev_err(dev, "not enough memory.\n"); ret = -ENOMEM; @@ -314,14 +314,14 @@ static int __devinit sdo_probe(struct platform_device *pdev) if (res == NULL) { dev_err(dev, "get memory resource failed.\n"); ret = -ENXIO; - goto fail_sdev; + goto fail; } - sdev->regs = ioremap(res->start, resource_size(res)); + sdev->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (sdev->regs == NULL) { dev_err(dev, "register mapping failed.\n"); ret = -ENXIO; - goto fail_sdev; + goto fail; } /* acquiring interrupt */ @@ -329,12 +329,13 @@ static int __devinit sdo_probe(struct platform_device *pdev) if (res == NULL) { dev_err(dev, "get interrupt resource failed.\n"); ret = -ENXIO; - goto fail_regs; + goto fail; } - ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev); + ret = devm_request_irq(&pdev->dev, res->start, sdo_irq_handler, 0, + "s5p-sdo", sdev); if (ret) { dev_err(dev, "request interrupt failed.\n"); - goto fail_regs; + goto fail; } sdev->irq = res->start; @@ -343,7 +344,7 @@ static int __devinit sdo_probe(struct platform_device *pdev) if (IS_ERR_OR_NULL(sdev->sclk_dac)) { dev_err(dev, "failed to get clock 'sclk_dac'\n"); ret = -ENXIO; - goto fail_irq; + goto fail; } sdev->dac = clk_get(dev, "dac"); if (IS_ERR_OR_NULL(sdev->dac)) { @@ -415,12 +416,6 @@ fail_dac: clk_put(sdev->dac); fail_sclk_dac: clk_put(sdev->sclk_dac); -fail_irq: - free_irq(sdev->irq, sdev); -fail_regs: - iounmap(sdev->regs); -fail_sdev: - kfree(sdev); fail: dev_info(dev, "probe failed\n"); return ret; @@ -439,9 +434,6 @@ static int __devexit sdo_remove(struct platform_device *pdev) clk_put(sdev->dacphy); clk_put(sdev->dac); clk_put(sdev->sclk_dac); - free_irq(sdev->irq, sdev); - iounmap(sdev->regs); - kfree(sdev); dev_info(&pdev->dev, "remove successful\n"); return 0; diff --git a/drivers/media/video/s5p-tv/sii9234_drv.c b/drivers/media/video/s5p-tv/sii9234_drv.c new file mode 100644 index 000000000000..0f31eccd7b80 --- /dev/null +++ b/drivers/media/video/s5p-tv/sii9234_drv.c @@ -0,0 +1,432 @@ +/* + * Samsung MHL interface driver + * + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/freezer.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/machine.h> +#include <linux/slab.h> + +#include <mach/gpio.h> +#include <plat/gpio-cfg.h> + +#include <media/sii9234.h> +#include <media/v4l2-subdev.h> + +MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>"); +MODULE_DESCRIPTION("Samsung MHL interface driver"); +MODULE_LICENSE("GPL"); + +struct sii9234_context { + struct i2c_client *client; + struct regulator *power; + int gpio_n_reset; + struct v4l2_subdev sd; +}; + +static inline struct sii9234_context *sd_to_context(struct v4l2_subdev *sd) +{ + return container_of(sd, struct sii9234_context, sd); +} + +static inline int sii9234_readb(struct i2c_client *client, int addr) +{ + return i2c_smbus_read_byte_data(client, addr); +} + +static inline int sii9234_writeb(struct i2c_client *client, int addr, int value) +{ + return i2c_smbus_write_byte_data(client, addr, value); +} + +static inline int sii9234_writeb_mask(struct i2c_client *client, int addr, + int value, int mask) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, addr); + if (ret < 0) + return ret; + ret = (ret & ~mask) | (value & mask); + return i2c_smbus_write_byte_data(client, addr, ret); +} + +static inline int sii9234_readb_idx(struct i2c_client *client, int addr) +{ + int ret; + ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); + if (ret < 0) + return ret; + ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); + if (ret < 0) + return ret; + return i2c_smbus_read_byte_data(client, 0xbe); +} + +static inline int sii9234_writeb_idx(struct i2c_client *client, int addr, + int value) +{ + int ret; + ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); + if (ret < 0) + return ret; + ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); + if (ret < 0) + return ret; + ret = i2c_smbus_write_byte_data(client, 0xbe, value); + return ret; +} + +static inline int sii9234_writeb_idx_mask(struct i2c_client *client, int addr, + int value, int mask) +{ + int ret; + + ret = sii9234_readb_idx(client, addr); + if (ret < 0) + return ret; + ret = (ret & ~mask) | (value & mask); + return sii9234_writeb_idx(client, addr, ret); +} + +static int sii9234_reset(struct sii9234_context *ctx) +{ + struct i2c_client *client = ctx->client; + struct device *dev = &client->dev; + int ret, tries; + + gpio_direction_output(ctx->gpio_n_reset, 1); + mdelay(1); + gpio_direction_output(ctx->gpio_n_reset, 0); + mdelay(1); + gpio_direction_output(ctx->gpio_n_reset, 1); + mdelay(1); + + /* going to TTPI mode */ + ret = sii9234_writeb(client, 0xc7, 0); + if (ret < 0) { + dev_err(dev, "failed to set TTPI mode\n"); + return ret; + } + for (tries = 0; tries < 100 ; ++tries) { + ret = sii9234_readb(client, 0x1b); + if (ret > 0) + break; + if (ret < 0) { + dev_err(dev, "failed to reset device\n"); + return -EIO; + } + mdelay(1); + } + if (tries == 100) { + dev_err(dev, "maximal number of tries reached\n"); + return -EIO; + } + + return 0; +} + +static int sii9234_verify_version(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int family, rev, tpi_rev, dev_id, sub_id, hdcp, id; + + family = sii9234_readb(client, 0x1b); + rev = sii9234_readb(client, 0x1c) & 0x0f; + tpi_rev = sii9234_readb(client, 0x1d) & 0x7f; + dev_id = sii9234_readb_idx(client, 0x0103); + sub_id = sii9234_readb_idx(client, 0x0102); + hdcp = sii9234_readb(client, 0x30); + + if (family < 0 || rev < 0 || tpi_rev < 0 || dev_id < 0 || + sub_id < 0 || hdcp < 0) { + dev_err(dev, "failed to read chip's version\n"); + return -EIO; + } + + id = (dev_id << 8) | sub_id; + + dev_info(dev, "chip: SiL%02x family: %02x, rev: %02x\n", + id, family, rev); + dev_info(dev, "tpi_rev:%02x, hdcp: %02x\n", tpi_rev, hdcp); + if (id != 0x9234) { + dev_err(dev, "not supported chip\n"); + return -ENODEV; + } + + return 0; +} + +static u8 data[][3] = { +/* setup from driver created by doonsoo45.kim */ + { 0x01, 0x05, 0x04 }, /* Enable Auto soft reset on SCDT = 0 */ + { 0x01, 0x08, 0x35 }, /* Power Up TMDS Tx Core */ + { 0x01, 0x0d, 0x1c }, /* HDMI Transcode mode enable */ + { 0x01, 0x2b, 0x01 }, /* Enable HDCP Compliance workaround */ + { 0x01, 0x79, 0x40 }, /* daniel test...MHL_INT */ + { 0x01, 0x80, 0x34 }, /* Enable Rx PLL Clock Value */ + { 0x01, 0x90, 0x27 }, /* Enable CBUS discovery */ + { 0x01, 0x91, 0xe5 }, /* Skip RGND detection */ + { 0x01, 0x92, 0x46 }, /* Force MHD mode */ + { 0x01, 0x93, 0xdc }, /* Disable CBUS pull-up during RGND measurement */ + { 0x01, 0x94, 0x66 }, /* 1.8V CBUS VTH & GND threshold */ + { 0x01, 0x95, 0x31 }, /* RGND block & single discovery attempt */ + { 0x01, 0x96, 0x22 }, /* use 1K and 2K setting */ + { 0x01, 0xa0, 0x10 }, /* SIMG: Term mode */ + { 0x01, 0xa1, 0xfc }, /* Disable internal Mobile HD driver */ + { 0x01, 0xa3, 0xfa }, /* SIMG: Output Swing default EB, 3x Clk Mult */ + { 0x01, 0xa5, 0x80 }, /* SIMG: RGND Hysterisis, 3x mode for Beast */ + { 0x01, 0xa6, 0x0c }, /* SIMG: Swing Offset */ + { 0x02, 0x3d, 0x3f }, /* Power up CVCC 1.2V core */ + { 0x03, 0x00, 0x00 }, /* SIMG: correcting HW default */ + { 0x03, 0x11, 0x01 }, /* Enable TxPLL Clock */ + { 0x03, 0x12, 0x15 }, /* Enable Tx Clock Path & Equalizer */ + { 0x03, 0x13, 0x60 }, /* SIMG: Set termination value */ + { 0x03, 0x14, 0xf0 }, /* SIMG: Change CKDT level */ + { 0x03, 0x17, 0x07 }, /* SIMG: PLL Calrefsel */ + { 0x03, 0x1a, 0x20 }, /* VCO Cal */ + { 0x03, 0x22, 0xe0 }, /* SIMG: Auto EQ */ + { 0x03, 0x23, 0xc0 }, /* SIMG: Auto EQ */ + { 0x03, 0x24, 0xa0 }, /* SIMG: Auto EQ */ + { 0x03, 0x25, 0x80 }, /* SIMG: Auto EQ */ + { 0x03, 0x26, 0x60 }, /* SIMG: Auto EQ */ + { 0x03, 0x27, 0x40 }, /* SIMG: Auto EQ */ + { 0x03, 0x28, 0x20 }, /* SIMG: Auto EQ */ + { 0x03, 0x29, 0x00 }, /* SIMG: Auto EQ */ + { 0x03, 0x31, 0x0b }, /* SIMG: Rx PLL BW value from I2C BW ~ 4MHz */ + { 0x03, 0x45, 0x06 }, /* SIMG: DPLL Mode */ + { 0x03, 0x4b, 0x06 }, /* SIMG: Correcting HW default */ + { 0x03, 0x4c, 0xa0 }, /* Manual zone control */ + { 0x03, 0x4d, 0x02 }, /* SIMG: PLL Mode Value (order is important) */ +}; + +static int sii9234_set_internal(struct sii9234_context *ctx) +{ + struct i2c_client *client = ctx->client; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(data); ++i) { + int addr = (data[i][0] << 8) | data[i][1]; + ret = sii9234_writeb_idx(client, addr, data[i][2]); + if (ret < 0) + return ret; + } + return 0; +} + +static int sii9234_runtime_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct sii9234_context *ctx = sd_to_context(sd); + struct i2c_client *client = ctx->client; + + dev_info(dev, "suspend start\n"); + + sii9234_writeb_mask(client, 0x1e, 3, 3); + regulator_disable(ctx->power); + + return 0; +} + +static int sii9234_runtime_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct sii9234_context *ctx = sd_to_context(sd); + struct i2c_client *client = ctx->client; + int ret; + + dev_info(dev, "resume start\n"); + regulator_enable(ctx->power); + + ret = sii9234_reset(ctx); + if (ret) + goto fail; + + /* enable tpi */ + ret = sii9234_writeb_mask(client, 0x1e, 1, 0); + if (ret < 0) + goto fail; + ret = sii9234_set_internal(ctx); + if (ret < 0) + goto fail; + + return 0; + +fail: + dev_err(dev, "failed to resume\n"); + regulator_disable(ctx->power); + + return ret; +} + +static const struct dev_pm_ops sii9234_pm_ops = { + .runtime_suspend = sii9234_runtime_suspend, + .runtime_resume = sii9234_runtime_resume, +}; + +static int sii9234_s_power(struct v4l2_subdev *sd, int on) +{ + struct sii9234_context *ctx = sd_to_context(sd); + int ret; + + if (on) + ret = pm_runtime_get_sync(&ctx->client->dev); + else + ret = pm_runtime_put(&ctx->client->dev); + /* only values < 0 indicate errors */ + return IS_ERR_VALUE(ret) ? ret : 0; +} + +static int sii9234_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct sii9234_context *ctx = sd_to_context(sd); + + /* (dis/en)able TDMS output */ + sii9234_writeb_mask(ctx->client, 0x1a, enable ? 0 : ~0 , 1 << 4); + return 0; +} + +static const struct v4l2_subdev_core_ops sii9234_core_ops = { + .s_power = sii9234_s_power, +}; + +static const struct v4l2_subdev_video_ops sii9234_video_ops = { + .s_stream = sii9234_s_stream, +}; + +static const struct v4l2_subdev_ops sii9234_ops = { + .core = &sii9234_core_ops, + .video = &sii9234_video_ops, +}; + +static int __devinit sii9234_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct sii9234_platform_data *pdata = dev->platform_data; + struct sii9234_context *ctx; + int ret; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + dev_err(dev, "out of memory\n"); + ret = -ENOMEM; + goto fail; + } + ctx->client = client; + + ctx->power = regulator_get(dev, "hdmi-en"); + if (IS_ERR(ctx->power)) { + dev_err(dev, "failed to acquire regulator hdmi-en\n"); + ret = PTR_ERR(ctx->power); + goto fail_ctx; + } + + ctx->gpio_n_reset = pdata->gpio_n_reset; + ret = gpio_request(ctx->gpio_n_reset, "MHL_RST"); + if (ret) { + dev_err(dev, "failed to acquire MHL_RST gpio\n"); + goto fail_power; + } + + v4l2_i2c_subdev_init(&ctx->sd, client, &sii9234_ops); + + pm_runtime_enable(dev); + + /* enable device */ + ret = pm_runtime_get_sync(dev); + if (ret) + goto fail_pm; + + /* verify chip version */ + ret = sii9234_verify_version(client); + if (ret) + goto fail_pm_get; + + /* stop processing */ + pm_runtime_put(dev); + + dev_info(dev, "probe successful\n"); + + return 0; + +fail_pm_get: + pm_runtime_put_sync(dev); + +fail_pm: + pm_runtime_disable(dev); + gpio_free(ctx->gpio_n_reset); + +fail_power: + regulator_put(ctx->power); + +fail_ctx: + kfree(ctx); + +fail: + dev_err(dev, "probe failed\n"); + + return ret; +} + +static int __devexit sii9234_remove(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct sii9234_context *ctx = sd_to_context(sd); + + pm_runtime_disable(dev); + gpio_free(ctx->gpio_n_reset); + regulator_put(ctx->power); + kfree(ctx); + + dev_info(dev, "remove successful\n"); + + return 0; +} + + +static const struct i2c_device_id sii9234_id[] = { + { "SII9234", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, sii9234_id); +static struct i2c_driver sii9234_driver = { + .driver = { + .name = "sii9234", + .owner = THIS_MODULE, + .pm = &sii9234_pm_ops, + }, + .probe = sii9234_probe, + .remove = __devexit_p(sii9234_remove), + .id_table = sii9234_id, +}; + +static int __init sii9234_init(void) +{ + return i2c_add_driver(&sii9234_driver); +} +module_init(sii9234_init); + +static void __exit sii9234_exit(void) +{ + i2c_del_driver(&sii9234_driver); +} +module_exit(sii9234_exit); diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index 99a2ac16f9e5..0caac50d7cf4 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -539,15 +539,4 @@ static struct i2c_driver saa6588_driver = { .id_table = saa6588_id, }; -static __init int init_saa6588(void) -{ - return i2c_add_driver(&saa6588_driver); -} - -static __exit void exit_saa6588(void) -{ - i2c_del_driver(&saa6588_driver); -} - -module_init(init_saa6588); -module_exit(exit_saa6588); +module_i2c_driver(saa6588_driver); diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 99664205ef4e..51cd4c8f0520 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -491,15 +491,4 @@ static struct i2c_driver saa7110_driver = { .id_table = saa7110_id, }; -static __init int init_saa7110(void) -{ - return i2c_add_driver(&saa7110_driver); -} - -static __exit void exit_saa7110(void) -{ - i2c_del_driver(&saa7110_driver); -} - -module_init(init_saa7110); -module_exit(exit_saa7110); +module_i2c_driver(saa7110_driver); diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 0ef5484696b6..2107336cd836 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1724,15 +1724,4 @@ static struct i2c_driver saa711x_driver = { .id_table = saa711x_id, }; -static __init int init_saa711x(void) -{ - return i2c_add_driver(&saa711x_driver); -} - -static __exit void exit_saa711x(void) -{ - i2c_del_driver(&saa711x_driver); -} - -module_init(init_saa711x); -module_exit(exit_saa711x); +module_i2c_driver(saa711x_driver); diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index ad964616c9d2..39c90b08eea8 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -852,15 +852,4 @@ static struct i2c_driver saa7127_driver = { .id_table = saa7127_id, }; -static __init int init_saa7127(void) -{ - return i2c_add_driver(&saa7127_driver); -} - -static __exit void exit_saa7127(void) -{ - i2c_del_driver(&saa7127_driver); -} - -module_init(init_saa7127); -module_exit(exit_saa7127); +module_i2c_driver(saa7127_driver); diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile index a646ccf51696..da3899329f52 100644 --- a/drivers/media/video/saa7134/Makefile +++ b/drivers/media/video/saa7134/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/video +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index f9f29cc93a8a..f147b05bd860 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -1001,18 +1001,7 @@ static struct i2c_driver saa6752hs_driver = { .id_table = saa6752hs_id, }; -static __init int init_saa6752hs(void) -{ - return i2c_add_driver(&saa6752hs_driver); -} - -static __exit void exit_saa6752hs(void) -{ - i2c_del_driver(&saa6752hs_driver); -} - -module_init(init_saa6752hs); -module_exit(exit_saa6752hs); +module_i2c_driver(saa6752hs_driver); /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 065d0f6be4a0..53aae5968ffb 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -33,6 +33,7 @@ #include "tea5767.h" #include "tda18271.h" #include "xc5000.h" +#include "s5h1411.h" /* commly used strings */ static char name_mute[] = "mute"; @@ -5712,6 +5713,36 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE1, } }, }, + [SAA7134_BOARD_KWORLD_PC150U] = { + .name = "Kworld PC150-U", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 1 << 21, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0000000, + }, + }, }; @@ -6306,6 +6337,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_KWORLD_ATSC110, /* ATSC 115 */ },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x17de, + .subdevice = 0xa134, + .driver_data = SAA7134_BOARD_KWORLD_PC150U, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, .subvendor = 0x1461, .subdevice = 0x7360, @@ -7134,6 +7171,23 @@ static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev, return 0; } +static int saa7134_kworld_pc150u_toggle_agc(struct saa7134_dev *dev, + enum tda18271_mode mode) +{ + switch (mode) { + case TDA18271_ANALOG: + saa7134_set_gpio(dev, 18, 0); + break; + case TDA18271_DIGITAL: + saa7134_set_gpio(dev, 18, 1); + msleep(30); + break; + default: + return -EINVAL; + } + return 0; +} + static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev, int command, int arg) { @@ -7150,6 +7204,9 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev, case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg); break; + case SAA7134_BOARD_KWORLD_PC150U: + ret = saa7134_kworld_pc150u_toggle_agc(dev, arg); + break; default: break; } @@ -7171,6 +7228,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, case SAA7134_BOARD_HAUPPAUGE_HVR1120: case SAA7134_BOARD_AVERMEDIA_M733A: case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: + case SAA7134_BOARD_KWORLD_PC150U: case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: /* tda8290 + tda18271 */ ret = saa7134_tda8290_18271_callback(dev, command, arg); @@ -7452,6 +7510,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_X7: case SAA7134_BOARD_BEHOLD_H7: case SAA7134_BOARD_BEHOLD_A7: + case SAA7134_BOARD_KWORLD_PC150U: dev->has_remote = SAA7134_REMOTE_I2C; break; case SAA7134_BOARD_AVERMEDIA_A169_B: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 089fa0fb5c94..aaa5c97a7216 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -61,6 +61,7 @@ #include "zl10036.h" #include "zl10039.h" #include "mt312.h" +#include "s5h1411.h" MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); @@ -1158,6 +1159,33 @@ static struct tda18271_config prohdtv_pro2_tda18271_config = { .output_opt = TDA18271_OUTPUT_LT_OFF, }; +static struct tda18271_std_map kworld_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config kworld_pc150u_tda18271_config = { + .std_map = &kworld_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, + .config = 3, /* Use tuner callback for AGC */ + .rf_cal_on_startup = 1 +}; + +static struct s5h1411_config kworld_s5h1411_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .qam_if = S5H1411_IF_4000, + .vsb_if = S5H1411_IF_3250, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = + S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + + /* ================================================================== * Core code */ @@ -1438,6 +1466,22 @@ static int dvb_init(struct saa7134_dev *dev) &dev->i2c_adap, 0x61, TUNER_PHILIPS_TUV1236D); break; + case SAA7134_BOARD_KWORLD_PC150U: + saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */ + saa7134_tuner_callback(dev, 0, + TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &kworld_s5h1411_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &kworld_pc150u_tda18271_config); + } + break; case SAA7134_BOARD_FLYDVBS_LR300: fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 2d3f6d265bbf..a176ec3285e0 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -254,7 +254,9 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, addr = msgs[i].addr << 1; if (msgs[i].flags & I2C_M_RD) addr |= 1; - if (i > 0 && msgs[i].flags & I2C_M_RD && msgs[i].addr != 0x40) { + if (i > 0 && msgs[i].flags & + I2C_M_RD && msgs[i].addr != 0x40 && + msgs[i].addr != 0x19) { /* workaround for a saa7134 i2c bug * needed to talk to the mt352 demux * thanks to pinnacle for the hint */ @@ -279,6 +281,16 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, d1printk("%02x", rc); msgs[i].buf[byte] = rc; } + /* discard mysterious extra byte when reading + from Samsung S5H1411. i2c bus gets error + if we do not. */ + if (0x19 == msgs[i].addr) { + d1printk(" ?"); + rc = i2c_recv_byte(dev); + if (rc < 0) + goto err; + d1printk("%02x", rc); + } } else { /* write bytes */ d2printk("write bytes\n"); diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 22ecd7297d2d..48d2878699b7 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -210,6 +210,54 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, return 1; } +/* copied and modified from get_key_msi_tvanywhere_plus() */ +static int get_key_kworld_pc150u(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char b; + unsigned int gpio; + + /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c->adapter->algo_data; + if (dev == NULL) { + i2cdprintk("get_key_kworld_pc150u: " + "ir->c->adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + /* GPIO&0x100 is pulsed low when a button is pressed. Don't do + I2C receive if gpio&0x100 is not low. */ + + if (gpio & 0x100) + return 0; /* No button press */ + + /* GPIO says there is a button press. Get it. */ + + if (1 != i2c_master_recv(ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* No button press */ + + if (b == 0xff) + return 0; + + /* Button pressed */ + + dprintk("get_key_kworld_pc150u: Key = 0x%02X\n", b); + *ir_key = b; + *ir_raw = b; + return 1; +} + static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char b; @@ -901,6 +949,21 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) msg_msi.addr, dev->i2c_adap.name, (1 == rc) ? "yes" : "no"); break; + case SAA7134_BOARD_KWORLD_PC150U: + /* copied and modified from MSI TV@nywhere Plus */ + dev->init_data.name = "Kworld PC150-U"; + dev->init_data.get_key = get_key_kworld_pc150u; + dev->init_data.ir_codes = RC_MAP_KWORLD_PC150U; + info.addr = 0x30; + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... + REVISIT: might no longer be needed */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk("probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); + break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: dev->init_data.name = "HVR 1110"; dev->init_data.get_key = get_key_hvr1110; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 42fba4f93c72..f625060e6a0f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -126,8 +126,8 @@ struct saa7134_card_ir { unsigned users; u32 polling; - u32 last_gpio; - u32 mask_keycode, mask_keydown, mask_keyup; + u32 last_gpio; + u32 mask_keycode, mask_keydown, mask_keyup; bool running; bool active; @@ -331,6 +331,7 @@ struct saa7134_card_ir { #define SAA7134_BOARD_BEHOLD_501 186 #define SAA7134_BOARD_BEHOLD_503FM 187 #define SAA7134_BOARD_SENSORAY811_911 188 +#define SAA7134_BOARD_KWORLD_PC150U 189 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 diff --git a/drivers/media/video/saa7164/Makefile b/drivers/media/video/saa7164/Makefile index ecd5811dc486..068443af30c8 100644 --- a/drivers/media/video/saa7164/Makefile +++ b/drivers/media/video/saa7164/Makefile @@ -4,9 +4,9 @@ saa7164-objs := saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \ obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/video +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c index 2fd38a01887f..a9ed686ad08a 100644 --- a/drivers/media/video/saa7164/saa7164-encoder.c +++ b/drivers/media/video/saa7164/saa7164-encoder.c @@ -791,11 +791,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, return 0; } -static int vidioc_log_status(struct file *file, void *priv) -{ - return 0; -} - static int fill_queryctrl(struct saa7164_encoder_params *params, struct v4l2_queryctrl *c) { @@ -1347,7 +1342,6 @@ static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, - .vidioc_log_status = vidioc_log_status, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_chip_ident = saa7164_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c index e2e034158718..273cf807401c 100644 --- a/drivers/media/video/saa7164/saa7164-vbi.c +++ b/drivers/media/video/saa7164/saa7164-vbi.c @@ -730,11 +730,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, return 0; } -static int vidioc_log_status(struct file *file, void *priv) -{ - return 0; -} - static int fill_queryctrl(struct saa7164_vbi_params *params, struct v4l2_queryctrl *c) { @@ -1256,7 +1251,6 @@ static const struct v4l2_ioctl_ops vbi_ioctl_ops = { .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, - .vidioc_log_status = vidioc_log_status, .vidioc_queryctrl = vidioc_queryctrl, #if 0 .vidioc_g_chip_ident = saa7164_g_chip_ident, diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c index b6172c2c517e..1e84466515aa 100644 --- a/drivers/media/video/saa717x.c +++ b/drivers/media/video/saa717x.c @@ -1375,15 +1375,4 @@ static struct i2c_driver saa717x_driver = { .id_table = saa717x_id, }; -static __init int init_saa717x(void) -{ - return i2c_add_driver(&saa717x_driver); -} - -static __exit void exit_saa717x(void) -{ - i2c_del_driver(&saa717x_driver); -} - -module_init(init_saa717x); -module_exit(exit_saa717x); +module_i2c_driver(saa717x_driver); diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 96f56c2f11f3..2c6b65c76e2b 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -374,15 +374,4 @@ static struct i2c_driver saa7185_driver = { .id_table = saa7185_id, }; -static __init int init_saa7185(void) -{ - return i2c_add_driver(&saa7185_driver); -} - -static __exit void exit_saa7185(void) -{ - i2c_del_driver(&saa7185_driver); -} - -module_init(init_saa7185); -module_exit(exit_saa7185); +module_i2c_driver(saa7185_driver); diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c index 211fa25a1239..d7d1670e0ca3 100644 --- a/drivers/media/video/saa7191.c +++ b/drivers/media/video/saa7191.c @@ -656,15 +656,4 @@ static struct i2c_driver saa7191_driver = { .id_table = saa7191_id, }; -static __init int init_saa7191(void) -{ - return i2c_add_driver(&saa7191_driver); -} - -static __exit void exit_saa7191(void) -{ - i2c_del_driver(&saa7191_driver); -} - -module_init(init_saa7191); -module_exit(exit_saa7191); +module_i2c_driver(saa7191_driver); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index f854d85a387c..424dfacd263a 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -112,6 +112,10 @@ struct sh_mobile_ceu_dev { u32 cflcr; + /* static max sizes either from platform data or default */ + int max_width; + int max_height; + enum v4l2_field field; int sequence; @@ -1081,7 +1085,15 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int if (ret < 0) return ret; - while ((mf.width > 2560 || mf.height > 1920) && shift < 4) { + /* + * All currently existing CEU implementations support 2560x1920 + * or larger frames. If the sensor is proposing too big a frame, + * don't bother with possibly supportred by the CEU larger + * sizes, just try VGA multiples. If needed, this can be + * adjusted in the future. + */ + while ((mf.width > pcdev->max_width || + mf.height > pcdev->max_height) && shift < 4) { /* Try 2560x1920, 1280x960, 640x480, 320x240 */ mf.width = 2560 >> shift; mf.height = 1920 >> shift; @@ -1377,6 +1389,8 @@ static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop, static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_mbus_framefmt *mf, bool ceu_can_scale) { + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct sh_mobile_ceu_dev *pcdev = ici->priv; struct sh_mobile_ceu_cam *cam = icd->host_priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; @@ -1410,8 +1424,8 @@ static int client_s_fmt(struct soc_camera_device *icd, if (ret < 0) return ret; - max_width = min(cap.bounds.width, 2560); - max_height = min(cap.bounds.height, 1920); + max_width = min(cap.bounds.width, pcdev->max_width); + max_height = min(cap.bounds.height, pcdev->max_height); /* Camera set a format, but geometry is not precise, try to improve */ tmp_w = mf->width; @@ -1551,7 +1565,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, if (ret < 0) return ret; - if (mf.width > 2560 || mf.height > 1920) + if (mf.width > pcdev->max_width || mf.height > pcdev->max_height) return -EINVAL; /* 4. Calculate camera scales */ @@ -1834,6 +1848,8 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct sh_mobile_ceu_dev *pcdev = ici->priv; const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); @@ -1854,8 +1870,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, /* FIXME: calculate using depth and bus width */ /* CFSZR requires height and width to be 4-pixel aligned */ - v4l_bound_align_image(&pix->width, 2, 2560, 2, - &pix->height, 4, 1920, 2, 0); + v4l_bound_align_image(&pix->width, 2, pcdev->max_width, 2, + &pix->height, 4, pcdev->max_height, 2, 0); width = pix->width; height = pix->height; @@ -1890,8 +1906,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, * requested a bigger rectangle, it will not return a * smaller one. */ - mf.width = 2560; - mf.height = 1920; + mf.width = pcdev->max_width; + mf.height = pcdev->max_height; ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), video, try_mbus_fmt, &mf); @@ -2082,6 +2098,9 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) goto exit_kfree; } + pcdev->max_width = pcdev->pdata->max_width ? : 2560; + pcdev->max_height = pcdev->pdata->max_height ? : 1920; + base = ioremap_nocache(res->start, resource_size(res)); if (!base) { err = -ENXIO; diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b82710745ba8..eb25756a07af 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -526,10 +526,6 @@ static int soc_camera_open(struct file *file) }, }; - ret = soc_camera_power_on(icd, icl); - if (ret < 0) - goto epower; - /* The camera could have been already on, try to reset */ if (icl->reset) icl->reset(icd->pdev); @@ -540,6 +536,10 @@ static int soc_camera_open(struct file *file) goto eiciadd; } + ret = soc_camera_power_on(icd, icl); + if (ret < 0) + goto epower; + pm_runtime_enable(&icd->vdev->dev); ret = pm_runtime_resume(&icd->vdev->dev); if (ret < 0 && ret != -ENOSYS) @@ -578,10 +578,10 @@ einitvb: esfmt: pm_runtime_disable(&icd->vdev->dev); eresume: - ici->ops->remove(icd); -eiciadd: soc_camera_power_off(icd, icl); epower: + ici->ops->remove(icd); +eiciadd: icd->use_count--; module_put(ici->ops->owner); @@ -1050,6 +1050,14 @@ static int soc_camera_probe(struct soc_camera_device *icd) if (ret < 0) goto ereg; + /* The camera could have been already on, try to reset */ + if (icl->reset) + icl->reset(icd->pdev); + + ret = ici->ops->add(icd); + if (ret < 0) + goto eadd; + /* * This will not yet call v4l2_subdev_core_ops::s_power(1), because the * subdevice has not been initialised yet. We'll have to call it once @@ -1060,14 +1068,6 @@ static int soc_camera_probe(struct soc_camera_device *icd) if (ret < 0) goto epower; - /* The camera could have been already on, try to reset */ - if (icl->reset) - icl->reset(icd->pdev); - - ret = ici->ops->add(icd); - if (ret < 0) - goto eadd; - /* Must have icd->vdev before registering the device */ ret = video_dev_create(icd); if (ret < 0) @@ -1165,10 +1165,10 @@ eadddev: video_device_release(icd->vdev); icd->vdev = NULL; evdc: - ici->ops->remove(icd); -eadd: soc_camera_power_off(icd, icl); epower: + ici->ops->remove(icd); +eadd: regulator_bulk_free(icl->num_regulators, icl->regulators); ereg: v4l2_ctrl_handler_free(&icd->ctrl_handler); diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c index d1b07aceaf94..e9d95bda2ab1 100644 --- a/drivers/media/video/sr030pc30.c +++ b/drivers/media/video/sr030pc30.c @@ -864,18 +864,7 @@ static struct i2c_driver sr030pc30_i2c_driver = { .id_table = sr030pc30_id, }; -static int __init sr030pc30_init(void) -{ - return i2c_add_driver(&sr030pc30_i2c_driver); -} - -static void __exit sr030pc30_exit(void) -{ - i2c_del_driver(&sr030pc30_i2c_driver); -} - -module_init(sr030pc30_init); -module_exit(sr030pc30_exit); +module_i2c_driver(sr030pc30_i2c_driver); MODULE_DESCRIPTION("Siliconfile SR030PC30 camera driver"); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index bd218545da9c..f7707e65761e 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -482,15 +482,4 @@ static struct i2c_driver tda7432_driver = { .id_table = tda7432_id, }; -static __init int init_tda7432(void) -{ - return i2c_add_driver(&tda7432_driver); -} - -static __exit void exit_tda7432(void) -{ - i2c_del_driver(&tda7432_driver); -} - -module_init(init_tda7432); -module_exit(exit_tda7432); +module_i2c_driver(tda7432_driver); diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index 22fa8202d5ca..465d7086babf 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -208,15 +208,4 @@ static struct i2c_driver tda9840_driver = { .id_table = tda9840_id, }; -static __init int init_tda9840(void) -{ - return i2c_add_driver(&tda9840_driver); -} - -static __exit void exit_tda9840(void) -{ - i2c_del_driver(&tda9840_driver); -} - -module_init(init_tda9840); -module_exit(exit_tda9840); +module_i2c_driver(tda9840_driver); diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c index 827425c5b866..d1d6ea1dd273 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/video/tea6415c.c @@ -184,15 +184,4 @@ static struct i2c_driver tea6415c_driver = { .id_table = tea6415c_id, }; -static __init int init_tea6415c(void) -{ - return i2c_add_driver(&tea6415c_driver); -} - -static __exit void exit_tea6415c(void) -{ - i2c_del_driver(&tea6415c_driver); -} - -module_init(init_tea6415c); -module_exit(exit_tea6415c); +module_i2c_driver(tea6415c_driver); diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index f350b6c24500..38757217a074 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -166,15 +166,4 @@ static struct i2c_driver tea6420_driver = { .id_table = tea6420_id, }; -static __init int init_tea6420(void) -{ - return i2c_add_driver(&tea6420_driver); -} - -static __exit void exit_tea6420(void) -{ - i2c_del_driver(&tea6420_driver); -} - -module_init(init_tea6420); -module_exit(exit_tea6420); +module_i2c_driver(tea6420_driver); diff --git a/drivers/media/video/ths7303.c b/drivers/media/video/ths7303.c index 61b1dd118364..e5c0eedebc58 100644 --- a/drivers/media/video/ths7303.c +++ b/drivers/media/video/ths7303.c @@ -137,16 +137,4 @@ static struct i2c_driver ths7303_driver = { .id_table = ths7303_id, }; -static int __init ths7303_init(void) -{ - return i2c_add_driver(&ths7303_driver); -} - -static void __exit ths7303_exit(void) -{ - i2c_del_driver(&ths7303_driver); -} - -module_init(ths7303_init); -module_exit(ths7303_exit); - +module_i2c_driver(ths7303_driver); diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c index 286ec7e7062a..809a75a558ee 100644 --- a/drivers/media/video/tlv320aic23b.c +++ b/drivers/media/video/tlv320aic23b.c @@ -227,15 +227,4 @@ static struct i2c_driver tlv320aic23b_driver = { .id_table = tlv320aic23b_id, }; -static __init int init_tlv320aic23b(void) -{ - return i2c_add_driver(&tlv320aic23b_driver); -} - -static __exit void exit_tlv320aic23b(void) -{ - i2c_del_driver(&tlv320aic23b_driver); -} - -module_init(init_tlv320aic23b); -module_exit(exit_tlv320aic23b); +module_i2c_driver(tlv320aic23b_driver); diff --git a/drivers/media/video/tm6000/tm6000-input.c b/drivers/media/video/tm6000/tm6000-input.c index 7844607dd45a..859eb90e4d56 100644 --- a/drivers/media/video/tm6000/tm6000-input.c +++ b/drivers/media/video/tm6000/tm6000-input.c @@ -481,8 +481,6 @@ int tm6000_ir_fini(struct tm6000_core *dev) dprintk(2, "%s\n",__func__); - rc_unregister_device(ir->rc); - if (!ir->polling) __tm6000_ir_int_stop(ir->rc); @@ -492,6 +490,7 @@ int tm6000_ir_fini(struct tm6000_core *dev) tm6000_flash_led(dev, 0); ir->pwled = 0; + rc_unregister_device(ir->rc); kfree(ir); dev->ir = NULL; diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 4059ea178c2d..a5c6397ad591 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -380,6 +380,21 @@ static void set_type(struct i2c_client *c, unsigned int type, tune_now = 0; break; } + case TUNER_XC5000C: + { + struct xc5000_config xc5000c_cfg = { + .i2c_address = t->i2c->addr, + /* if_khz will be set at dvb_attach() */ + .if_khz = 0, + .chip_id = XC5000C, + }; + + if (!dvb_attach(xc5000_attach, + &t->fe, t->i2c->adapter, &xc5000c_cfg)) + goto attach_failed; + tune_now = 0; + break; + } case TUNER_NXP_TDA18271: { struct tda18271_config cfg = { @@ -1314,18 +1329,7 @@ static struct i2c_driver tuner_driver = { .id_table = tuner_id, }; -static __init int init_tuner(void) -{ - return i2c_add_driver(&tuner_driver); -} - -static __exit void exit_tuner(void) -{ - i2c_del_driver(&tuner_driver); -} - -module_init(init_tuner); -module_exit(exit_tuner); +module_i2c_driver(tuner_driver); MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners"); MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index f22dbef9b95b..c5b1a7365e4f 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -2078,15 +2078,4 @@ static struct i2c_driver tvaudio_driver = { .id_table = tvaudio_id, }; -static __init int init_tvaudio(void) -{ - return i2c_add_driver(&tvaudio_driver); -} - -static __exit void exit_tvaudio(void) -{ - i2c_del_driver(&tvaudio_driver); -} - -module_init(init_tvaudio); -module_exit(exit_tvaudio); +module_i2c_driver(tvaudio_driver); diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 6103d1b1081e..3b6cf034976a 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -286,8 +286,16 @@ hauppauge_tuner[] = { TUNER_ABSENT, "MaxLinear 301"}, { TUNER_ABSENT, "Mirics MSi001"}, { TUNER_ABSENT, "MaxLinear MxL241SF"}, - { TUNER_ABSENT, "Xceive XC5000C"}, + { TUNER_XC5000C, "Xceive XC5000C"}, { TUNER_ABSENT, "Montage M68TS2020"}, + { TUNER_ABSENT, "Siano SMS1530"}, + { TUNER_ABSENT, "Dibcom 7090"}, + { TUNER_ABSENT, "Xceive XC5200C"}, + { TUNER_ABSENT, "NXP 18273"}, + { TUNER_ABSENT, "Montage M88TS2022"}, + /* 180-189 */ + { TUNER_ABSENT, "NXP 18272M"}, + { TUNER_ABSENT, "NXP 18272S"}, }; /* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index dd26cacd0556..cd615c1d6011 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -1163,15 +1163,4 @@ static struct i2c_driver tvp514x_driver = { .id_table = tvp514x_id, }; -static int __init tvp514x_init(void) -{ - return i2c_add_driver(&tvp514x_driver); -} - -static void __exit tvp514x_exit(void) -{ - i2c_del_driver(&tvp514x_driver); -} - -module_init(tvp514x_init); -module_exit(tvp514x_exit); +module_i2c_driver(tvp514x_driver); diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index 6be9910a6e24..1326e11cf4a9 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -17,6 +17,13 @@ #include "tvp5150_reg.h" +#define TVP5150_H_MAX 720 +#define TVP5150_V_MAX_525_60 480 +#define TVP5150_V_MAX_OTHERS 576 +#define TVP5150_MAX_CROP_LEFT 511 +#define TVP5150_MAX_CROP_TOP 127 +#define TVP5150_CROP_SHIFT 2 + MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); @@ -29,6 +36,7 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); struct tvp5150 { struct v4l2_subdev sd; struct v4l2_ctrl_handler hdl; + struct v4l2_rect rect; v4l2_std_id norm; /* Current set standard */ u32 input; @@ -732,6 +740,13 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) if (decoder->norm == std) return 0; + /* Change cropping height limits */ + if (std & V4L2_STD_525_60) + decoder->rect.height = TVP5150_V_MAX_525_60; + else + decoder->rect.height = TVP5150_V_MAX_OTHERS; + + return tvp5150_set_std(sd, std); } @@ -828,11 +843,8 @@ static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, else std = decoder->norm; - f->width = 720; - if (std & V4L2_STD_525_60) - f->height = 480; - else - f->height = 576; + f->width = decoder->rect.width; + f->height = decoder->rect.height; f->code = V4L2_MBUS_FMT_YUYV8_2X8; f->field = V4L2_FIELD_SEQ_TB; @@ -843,6 +855,99 @@ static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, return 0; } +static int tvp5150_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct v4l2_rect rect = a->c; + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std; + int hmax; + + v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n", + __func__, rect.left, rect.top, rect.width, rect.height); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + /* tvp5150 has some special limits */ + rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT); + rect.width = clamp(rect.width, + TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left, + TVP5150_H_MAX - rect.left); + rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP); + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + hmax = TVP5150_V_MAX_525_60; + else + hmax = TVP5150_V_MAX_OTHERS; + + rect.height = clamp(rect.height, + hmax - TVP5150_MAX_CROP_TOP - rect.top, + hmax - rect.top); + + tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top); + tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, + rect.top + rect.height - hmax); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB, + rect.left >> TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB, + rect.left | (1 << TVP5150_CROP_SHIFT)); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB, + (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >> + TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB, + rect.left + rect.width - TVP5150_MAX_CROP_LEFT); + + decoder->rect = rect; + + return 0; +} + +static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + + a->c = decoder->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + v4l2_std_id std; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = TVP5150_H_MAX; + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + a->bounds.height = TVP5150_V_MAX_525_60; + else + a->bounds.height = TVP5150_V_MAX_OTHERS; + + a->defrect = a->bounds; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + /**************************************************************************** I2C Command ****************************************************************************/ @@ -998,6 +1103,10 @@ static const struct v4l2_subdev_video_ops tvp5150_video_ops = { .enum_mbus_fmt = tvp5150_enum_mbus_fmt, .s_mbus_fmt = tvp5150_mbus_fmt, .try_mbus_fmt = tvp5150_mbus_fmt, + .g_mbus_fmt = tvp5150_mbus_fmt, + .s_crop = tvp5150_s_crop, + .g_crop = tvp5150_g_crop, + .cropcap = tvp5150_cropcap, }; static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { @@ -1083,6 +1192,15 @@ static int tvp5150_probe(struct i2c_client *c, } v4l2_ctrl_handler_setup(&core->hdl); + /* Default is no cropping */ + core->rect.top = 0; + if (tvp5150_read_std(sd) & V4L2_STD_525_60) + core->rect.height = TVP5150_V_MAX_525_60; + else + core->rect.height = TVP5150_V_MAX_OTHERS; + core->rect.left = 0; + core->rect.width = TVP5150_H_MAX; + if (debug > 1) tvp5150_log_status(sd); return 0; @@ -1121,15 +1239,4 @@ static struct i2c_driver tvp5150_driver = { .id_table = tvp5150_id, }; -static __init int init_tvp5150(void) -{ - return i2c_add_driver(&tvp5150_driver); -} - -static __exit void exit_tvp5150(void) -{ - i2c_del_driver(&tvp5150_driver); -} - -module_init(init_tvp5150); -module_exit(exit_tvp5150); +module_i2c_driver(tvp5150_driver); diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c index 236c559d5f51..d7676d85c4df 100644 --- a/drivers/media/video/tvp7002.c +++ b/drivers/media/video/tvp7002.c @@ -1069,27 +1069,4 @@ static struct i2c_driver tvp7002_driver = { .id_table = tvp7002_id, }; -/* - * tvp7002_init - Initialize driver via I2C interface - * - * Register the TVP7002 driver. - * Return 0 on success or error code on failure. - */ -static int __init tvp7002_init(void) -{ - return i2c_add_driver(&tvp7002_driver); -} - -/* - * tvp7002_exit - Remove driver via I2C interface - * - * Unregister the TVP7002 driver. - * Returns nothing. - */ -static void __exit tvp7002_exit(void) -{ - i2c_del_driver(&tvp7002_driver); -} - -module_init(tvp7002_init); -module_exit(tvp7002_exit); +module_i2c_driver(tvp7002_driver); diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c index a514fa61116c..8768efb8508a 100644 --- a/drivers/media/video/tw9910.c +++ b/drivers/media/video/tw9910.c @@ -951,21 +951,7 @@ static struct i2c_driver tw9910_i2c_driver = { .id_table = tw9910_id, }; -/* - * module function - */ -static int __init tw9910_module_init(void) -{ - return i2c_add_driver(&tw9910_i2c_driver); -} - -static void __exit tw9910_module_exit(void) -{ - i2c_del_driver(&tw9910_i2c_driver); -} - -module_init(tw9910_module_init); -module_exit(tw9910_module_exit); +module_i2c_driver(tw9910_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for tw9910"); MODULE_AUTHOR("Kuninori Morimoto"); diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 1aab96a88203..1e7446542091 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -271,15 +271,4 @@ static struct i2c_driver upd64031a_driver = { .id_table = upd64031a_id, }; -static __init int init_upd64031a(void) -{ - return i2c_add_driver(&upd64031a_driver); -} - -static __exit void exit_upd64031a(void) -{ - i2c_del_driver(&upd64031a_driver); -} - -module_init(init_upd64031a); -module_exit(exit_upd64031a); +module_i2c_driver(upd64031a_driver); diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 65d065aa6091..75d6acc62018 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -243,15 +243,4 @@ static struct i2c_driver upd64083_driver = { .id_table = upd64083_id, }; -static __init int init_upd64083(void) -{ - return i2c_add_driver(&upd64083_driver); -} - -static __exit void exit_upd64083(void) -{ - i2c_del_driver(&upd64083_driver); -} - -module_init(init_upd64083); -module_exit(exit_upd64083); +module_i2c_driver(upd64083_driver); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index a240d43d15d1..1d131720b6d7 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -23,6 +23,7 @@ * codec can't handle MJPEG data. */ +#include <linux/atomic.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> @@ -32,7 +33,6 @@ #include <linux/vmalloc.h> #include <linux/wait.h> #include <linux/version.h> -#include <asm/atomic.h> #include <asm/unaligned.h> #include <media/v4l2-common.h> @@ -2139,6 +2139,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Dell XPS m1530 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05a9, + .idProduct = 0x2640, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_DEF }, /* Apple Built-In iSight */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 518f77d3a4d8..8f54e24e3f35 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -126,7 +126,7 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type, int drop_corrupted) { queue->queue.type = type; - queue->queue.io_modes = VB2_MMAP; + queue->queue.io_modes = VB2_MMAP | VB2_USERPTR; queue->queue.drv_priv = queue; queue->queue.buf_struct_size = sizeof(struct uvc_buffer); queue->queue.ops = &uvc_queue_qops; diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index 2ae4f880ea05..ff2cdddf9bc6 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -11,6 +11,7 @@ * */ +#include <linux/compat.h> #include <linux/kernel.h> #include <linux/version.h> #include <linux/list.h> @@ -1012,7 +1013,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) default: uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", cmd); - return -EINVAL; + return -ENOTTY; } return ret; @@ -1030,6 +1031,207 @@ static long uvc_v4l2_ioctl(struct file *file, return video_usercopy(file, cmd, arg, uvc_v4l2_do_ioctl); } +#ifdef CONFIG_COMPAT +struct uvc_xu_control_mapping32 { + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + __u32 v4l2_type; + __u32 data_type; + + compat_caddr_t menu_info; + __u32 menu_count; + + __u32 reserved[4]; +}; + +static int uvc_v4l2_get_xu_mapping(struct uvc_xu_control_mapping *kp, + const struct uvc_xu_control_mapping32 __user *up) +{ + struct uvc_menu_info __user *umenus; + struct uvc_menu_info __user *kmenus; + compat_caddr_t p; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + __copy_from_user(kp, up, offsetof(typeof(*up), menu_info)) || + __get_user(kp->menu_count, &up->menu_count)) + return -EFAULT; + + memset(kp->reserved, 0, sizeof(kp->reserved)); + + if (kp->menu_count == 0) { + kp->menu_info = NULL; + return 0; + } + + if (__get_user(p, &up->menu_info)) + return -EFAULT; + umenus = compat_ptr(p); + if (!access_ok(VERIFY_READ, umenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + kmenus = compat_alloc_user_space(kp->menu_count * sizeof(*kmenus)); + if (kmenus == NULL) + return -EFAULT; + kp->menu_info = kmenus; + + if (copy_in_user(kmenus, umenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + return 0; +} + +static int uvc_v4l2_put_xu_mapping(const struct uvc_xu_control_mapping *kp, + struct uvc_xu_control_mapping32 __user *up) +{ + struct uvc_menu_info __user *umenus; + struct uvc_menu_info __user *kmenus = kp->menu_info; + compat_caddr_t p; + + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || + __copy_to_user(up, kp, offsetof(typeof(*up), menu_info)) || + __put_user(kp->menu_count, &up->menu_count)) + return -EFAULT; + + __clear_user(up->reserved, sizeof(up->reserved)); + + if (kp->menu_count == 0) + return 0; + + if (get_user(p, &up->menu_info)) + return -EFAULT; + umenus = compat_ptr(p); + if (!access_ok(VERIFY_WRITE, umenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + if (copy_in_user(umenus, kmenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + return 0; +} + +struct uvc_xu_control_query32 { + __u8 unit; + __u8 selector; + __u8 query; + __u16 size; + compat_caddr_t data; +}; + +static int uvc_v4l2_get_xu_query(struct uvc_xu_control_query *kp, + const struct uvc_xu_control_query32 __user *up) +{ + u8 __user *udata; + u8 __user *kdata; + compat_caddr_t p; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + __copy_from_user(kp, up, offsetof(typeof(*up), data))) + return -EFAULT; + + if (kp->size == 0) { + kp->data = NULL; + return 0; + } + + if (__get_user(p, &up->data)) + return -EFAULT; + udata = compat_ptr(p); + if (!access_ok(VERIFY_READ, udata, kp->size)) + return -EFAULT; + + kdata = compat_alloc_user_space(kp->size); + if (kdata == NULL) + return -EFAULT; + kp->data = kdata; + + if (copy_in_user(kdata, udata, kp->size)) + return -EFAULT; + + return 0; +} + +static int uvc_v4l2_put_xu_query(const struct uvc_xu_control_query *kp, + struct uvc_xu_control_query32 __user *up) +{ + u8 __user *udata; + u8 __user *kdata = kp->data; + compat_caddr_t p; + + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || + __copy_to_user(up, kp, offsetof(typeof(*up), data))) + return -EFAULT; + + if (kp->size == 0) + return 0; + + if (get_user(p, &up->data)) + return -EFAULT; + udata = compat_ptr(p); + if (!access_ok(VERIFY_READ, udata, kp->size)) + return -EFAULT; + + if (copy_in_user(udata, kdata, kp->size)) + return -EFAULT; + + return 0; +} + +#define UVCIOC_CTRL_MAP32 _IOWR('u', 0x20, struct uvc_xu_control_mapping32) +#define UVCIOC_CTRL_QUERY32 _IOWR('u', 0x21, struct uvc_xu_control_query32) + +static long uvc_v4l2_compat_ioctl32(struct file *file, + unsigned int cmd, unsigned long arg) +{ + union { + struct uvc_xu_control_mapping xmap; + struct uvc_xu_control_query xqry; + } karg; + void __user *up = compat_ptr(arg); + mm_segment_t old_fs; + long ret; + + switch (cmd) { + case UVCIOC_CTRL_MAP32: + cmd = UVCIOC_CTRL_MAP; + ret = uvc_v4l2_get_xu_mapping(&karg.xmap, up); + break; + + case UVCIOC_CTRL_QUERY32: + cmd = UVCIOC_CTRL_QUERY; + ret = uvc_v4l2_get_xu_query(&karg.xqry, up); + break; + + default: + return -ENOIOCTLCMD; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = uvc_v4l2_ioctl(file, cmd, (unsigned long)&karg); + set_fs(old_fs); + + if (ret < 0) + return ret; + + switch (cmd) { + case UVCIOC_CTRL_MAP: + ret = uvc_v4l2_put_xu_mapping(&karg.xmap, up); + break; + + case UVCIOC_CTRL_QUERY: + ret = uvc_v4l2_put_xu_query(&karg.xqry, up); + break; + } + + return ret; +} +#endif + static ssize_t uvc_v4l2_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { @@ -1076,6 +1278,9 @@ const struct v4l2_file_operations uvc_fops = { .open = uvc_v4l2_open, .release = uvc_v4l2_release, .unlocked_ioctl = uvc_v4l2_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl32 = uvc_v4l2_compat_ioctl32, +#endif .read = uvc_v4l2_read, .mmap = uvc_v4l2_mmap, .poll = uvc_v4l2_poll, diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index af4419e6c658..2829d256e4b7 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -14,12 +14,11 @@ */ #include <linux/compat.h> -#include <linux/videodev2.h> #include <linux/module.h> +#include <linux/videodev2.h> +#include <media/v4l2-dev.h> #include <media/v4l2-ioctl.h> -#ifdef CONFIG_COMPAT - static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { long ret = -ENOIOCTLCMD; @@ -937,6 +936,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) { + struct video_device *vdev = video_devdata(file); long ret = -ENOIOCTLCMD; if (!file->f_op->unlocked_ioctl) @@ -1005,6 +1005,8 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_G_ENC_INDEX: case VIDIOC_ENCODER_CMD: case VIDIOC_TRY_ENCODER_CMD: + case VIDIOC_DECODER_CMD: + case VIDIOC_TRY_DECODER_CMD: case VIDIOC_DBG_S_REGISTER: case VIDIOC_DBG_G_REGISTER: case VIDIOC_DBG_G_CHIP_IDENT: @@ -1025,14 +1027,16 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) break; default: - printk(KERN_WARNING "compat_ioctl32: " - "unknown ioctl '%c', dir=%d, #%d (0x%08x)\n", - _IOC_TYPE(cmd), _IOC_DIR(cmd), _IOC_NR(cmd), cmd); + if (vdev->fops->compat_ioctl32) + ret = vdev->fops->compat_ioctl32(file, cmd, arg); + + if (ret == -ENOIOCTLCMD) + printk(KERN_WARNING "compat_ioctl32: " + "unknown ioctl '%c', dir=%d, #%d (0x%08x)\n", + _IOC_TYPE(cmd), _IOC_DIR(cmd), _IOC_NR(cmd), + cmd); break; } return ret; } EXPORT_SYMBOL_GPL(v4l2_compat_ioctl32); -#endif - -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index cccd42be718a..18015c0a8d31 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -175,6 +175,15 @@ const char * const *v4l2_ctrl_get_menu(u32 id) "16-bit CRC", NULL }; + static const char * const mpeg_audio_dec_playback[] = { + "Auto", + "Stereo", + "Left", + "Right", + "Mono", + "Swapped Stereo", + NULL + }; static const char * const mpeg_video_encoding[] = { "MPEG-1", "MPEG-2", @@ -236,8 +245,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) }; static const char * const tune_preemphasis[] = { "No Preemphasis", - "50 useconds", - "75 useconds", + "50 Microseconds", + "75 Microseconds", NULL, }; static const char * const header_mode[] = { @@ -334,7 +343,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id) }; static const char * const mpeg4_profile[] = { "Simple", - "Adcanved Simple", + "Advanced Simple", "Core", "Simple Scalable", "Advanced Coding Efficency", @@ -353,6 +362,16 @@ const char * const *v4l2_ctrl_get_menu(u32 id) NULL, }; + static const char * const jpeg_chroma_subsampling[] = { + "4:4:4", + "4:2:2", + "4:2:0", + "4:1:1", + "4:1:0", + "Gray", + NULL, + }; + switch (id) { case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return mpeg_audio_sampling_freq; @@ -374,6 +393,9 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return mpeg_audio_emphasis; case V4L2_CID_MPEG_AUDIO_CRC: return mpeg_audio_crc; + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: + case V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK: + return mpeg_audio_dec_playback; case V4L2_CID_MPEG_VIDEO_ENCODING: return mpeg_video_encoding; case V4L2_CID_MPEG_VIDEO_ASPECT: @@ -414,6 +436,9 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return mpeg_mpeg4_level; case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: return mpeg4_profile; + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: + return jpeg_chroma_subsampling; + default: return NULL; } @@ -492,6 +517,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute"; case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate"; case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate"; + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: return "Audio Playback"; + case V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK: return "Audio Multilingual Playback"; case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding"; case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect"; case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames"; @@ -546,6 +573,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB: return "Number of MBs in a Slice"; case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: return "Slice Partitioning Method"; case V4L2_CID_MPEG_VIDEO_VBV_SIZE: return "VBV Buffer Size"; + case V4L2_CID_MPEG_VIDEO_DEC_PTS: return "Video Decoder PTS"; + case V4L2_CID_MPEG_VIDEO_DEC_FRAME: return "Video Decoder Frame Count"; /* CAMERA controls */ /* Keep the order of the 'case's the same as in videodev2.h! */ @@ -607,6 +636,14 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_FLASH_CHARGE: return "Charge"; case V4L2_CID_FLASH_READY: return "Ready to Strobe"; + /* JPEG encoder controls */ + /* Keep the order of the 'case's the same as in videodev2.h! */ + case V4L2_CID_JPEG_CLASS: return "JPEG Compression Controls"; + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: return "Chroma Subsampling"; + case V4L2_CID_JPEG_RESTART_INTERVAL: return "Restart Interval"; + case V4L2_CID_JPEG_COMPRESSION_QUALITY: return "Compression Quality"; + case V4L2_CID_JPEG_ACTIVE_MARKER: return "Active Markers"; + default: return NULL; } @@ -674,6 +711,8 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: case V4L2_CID_MPEG_AUDIO_EMPHASIS: case V4L2_CID_MPEG_AUDIO_CRC: + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: + case V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK: case V4L2_CID_MPEG_VIDEO_ENCODING: case V4L2_CID_MPEG_VIDEO_ASPECT: case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: @@ -693,6 +732,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC: case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL: case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: *type = V4L2_CTRL_TYPE_MENU; break; case V4L2_CID_RDS_TX_PS_NAME: @@ -704,6 +744,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_MPEG_CLASS: case V4L2_CID_FM_TX_CLASS: case V4L2_CID_FLASH_CLASS: + case V4L2_CID_JPEG_CLASS: *type = V4L2_CTRL_TYPE_CTRL_CLASS; /* You can neither read not write these */ *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY; @@ -717,6 +758,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, *max = 0xFFFFFF; break; case V4L2_CID_FLASH_FAULT: + case V4L2_CID_JPEG_ACTIVE_MARKER: *type = V4L2_CTRL_TYPE_BITMASK; break; case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: @@ -724,6 +766,11 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, *type = V4L2_CTRL_TYPE_INTEGER; *flags |= V4L2_CTRL_FLAG_READ_ONLY; break; + case V4L2_CID_MPEG_VIDEO_DEC_FRAME: + case V4L2_CID_MPEG_VIDEO_DEC_PTS: + *type = V4L2_CTRL_TYPE_INTEGER64; + *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_VOLATILE; + break; default: *type = V4L2_CTRL_TYPE_INTEGER; break; @@ -1470,7 +1517,7 @@ EXPORT_SYMBOL(v4l2_ctrl_add_ctrl); int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, struct v4l2_ctrl_handler *add) { - struct v4l2_ctrl *ctrl; + struct v4l2_ctrl_ref *ref; int ret = 0; /* Do nothing if either handler is NULL or if they are the same */ @@ -1479,7 +1526,9 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, if (hdl->error) return hdl->error; mutex_lock(&add->lock); - list_for_each_entry(ctrl, &add->ctrls, node) { + list_for_each_entry(ref, &add->ctrl_refs, node) { + struct v4l2_ctrl *ctrl = ref->ctrl; + /* Skip handler-private controls. */ if (ctrl->is_private) continue; @@ -2359,3 +2408,35 @@ void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl, v4l2_ctrl_unlock(ctrl); } EXPORT_SYMBOL(v4l2_ctrl_del_event); + +int v4l2_ctrl_log_status(struct file *file, void *fh) +{ + struct video_device *vfd = video_devdata(file); + struct v4l2_fh *vfh = file->private_data; + + if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags) && vfd->v4l2_dev) + v4l2_ctrl_handler_log_status(vfh->ctrl_handler, + vfd->v4l2_dev->name); + return 0; +} +EXPORT_SYMBOL(v4l2_ctrl_log_status); + +int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + if (sub->type == V4L2_EVENT_CTRL) + return v4l2_event_subscribe(fh, sub, 0); + return -EINVAL; +} +EXPORT_SYMBOL(v4l2_ctrl_subscribe_event); + +unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait) +{ + struct v4l2_fh *fh = file->private_data; + + if (v4l2_event_pending(fh)) + return POLLPRI; + poll_wait(file, &fh->wait, wait); + return 0; +} +EXPORT_SYMBOL(v4l2_ctrl_poll); diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 96e9615663e9..041804b73ebd 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -788,7 +788,7 @@ static void __exit videodev_exit(void) unregister_chrdev_region(dev, VIDEO_NUM_DEVICES); } -module_init(videodev_init) +subsys_initcall(videodev_init); module_exit(videodev_exit) MODULE_AUTHOR("Alan Cox, Mauro Carvalho Chehab <mchehab@infradead.org>"); diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 3f623859a337..5b2ec1fd2d0a 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -260,6 +260,8 @@ static const char *v4l2_ioctls[] = { [_IOC_NR(VIDIOC_ENCODER_CMD)] = "VIDIOC_ENCODER_CMD", [_IOC_NR(VIDIOC_TRY_ENCODER_CMD)] = "VIDIOC_TRY_ENCODER_CMD", + [_IOC_NR(VIDIOC_DECODER_CMD)] = "VIDIOC_DECODER_CMD", + [_IOC_NR(VIDIOC_TRY_DECODER_CMD)] = "VIDIOC_TRY_DECODER_CMD", [_IOC_NR(VIDIOC_DBG_S_REGISTER)] = "VIDIOC_DBG_S_REGISTER", [_IOC_NR(VIDIOC_DBG_G_REGISTER)] = "VIDIOC_DBG_G_REGISTER", @@ -540,10 +542,12 @@ static long __video_do_ioctl(struct file *file, if (!ret) dbgarg(cmd, "driver=%s, card=%s, bus=%s, " "version=0x%08x, " - "capabilities=0x%08x\n", + "capabilities=0x%08x, " + "device_caps=0x%08x\n", cap->driver, cap->card, cap->bus_info, cap->version, - cap->capabilities); + cap->capabilities, + cap->device_caps); break; } @@ -1762,6 +1766,32 @@ static long __video_do_ioctl(struct file *file, dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags); break; } + case VIDIOC_DECODER_CMD: + { + struct v4l2_decoder_cmd *p = arg; + + if (!ops->vidioc_decoder_cmd) + break; + if (ret_prio) { + ret = ret_prio; + break; + } + ret = ops->vidioc_decoder_cmd(file, fh, p); + if (!ret) + dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags); + break; + } + case VIDIOC_TRY_DECODER_CMD: + { + struct v4l2_decoder_cmd *p = arg; + + if (!ops->vidioc_try_decoder_cmd) + break; + ret = ops->vidioc_try_decoder_cmd(file, fh, p); + if (!ret) + dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags); + break; + } case VIDIOC_G_PARM: { struct v4l2_streamparm *p = arg; @@ -1909,7 +1939,13 @@ static long __video_do_ioctl(struct file *file, { if (!ops->vidioc_log_status) break; + if (vfd->v4l2_dev) + pr_info("%s: ================= START STATUS =================\n", + vfd->v4l2_dev->name); ret = ops->vidioc_log_status(file, fh); + if (vfd->v4l2_dev) + pr_info("%s: ================== END STATUS ==================\n", + vfd->v4l2_dev->name); break; } #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -2419,7 +2455,7 @@ video_usercopy(struct file *file, unsigned int cmd, unsigned long arg, /* Handles IOCTL */ err = func(file, cmd, parg); if (err == -ENOIOCTLCMD) - err = -EINVAL; + err = -ENOTTY; if (has_array_args) { *kernel_ptr = user_ptr; diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index 41d118ee2de6..6fe88e965a8c 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -194,8 +194,16 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) } #endif - case VIDIOC_LOG_STATUS: - return v4l2_subdev_call(sd, core, log_status); + case VIDIOC_LOG_STATUS: { + int ret; + + pr_info("%s: ================= START STATUS =================\n", + sd->name); + ret = v4l2_subdev_call(sd, core, log_status); + pr_info("%s: ================== END STATUS ==================\n", + sd->name); + return ret; + } #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) case VIDIOC_SUBDEV_G_FMT: { diff --git a/drivers/media/video/videobuf2-vmalloc.c b/drivers/media/video/videobuf2-vmalloc.c index 4e789a178f8a..6b5ca6c70a46 100644 --- a/drivers/media/video/videobuf2-vmalloc.c +++ b/drivers/media/video/videobuf2-vmalloc.c @@ -10,6 +10,7 @@ * the Free Software Foundation. */ +#include <linux/io.h> #include <linux/module.h> #include <linux/mm.h> #include <linux/sched.h> @@ -22,6 +23,7 @@ struct vb2_vmalloc_buf { void *vaddr; struct page **pages; + struct vm_area_struct *vma; int write; unsigned long size; unsigned int n_pages; @@ -71,6 +73,8 @@ static void *vb2_vmalloc_get_userptr(void *alloc_ctx, unsigned long vaddr, struct vb2_vmalloc_buf *buf; unsigned long first, last; int n_pages, offset; + struct vm_area_struct *vma; + dma_addr_t physp; buf = kzalloc(sizeof(*buf), GFP_KERNEL); if (!buf) @@ -80,23 +84,37 @@ static void *vb2_vmalloc_get_userptr(void *alloc_ctx, unsigned long vaddr, offset = vaddr & ~PAGE_MASK; buf->size = size; - first = vaddr >> PAGE_SHIFT; - last = (vaddr + size - 1) >> PAGE_SHIFT; - buf->n_pages = last - first + 1; - buf->pages = kzalloc(buf->n_pages * sizeof(struct page *), GFP_KERNEL); - if (!buf->pages) - goto fail_pages_array_alloc; - /* current->mm->mmap_sem is taken by videobuf2 core */ - n_pages = get_user_pages(current, current->mm, vaddr & PAGE_MASK, - buf->n_pages, write, 1, /* force */ - buf->pages, NULL); - if (n_pages != buf->n_pages) - goto fail_get_user_pages; - - buf->vaddr = vm_map_ram(buf->pages, buf->n_pages, -1, PAGE_KERNEL); - if (!buf->vaddr) - goto fail_get_user_pages; + vma = find_vma(current->mm, vaddr); + if (vma && (vma->vm_flags & VM_PFNMAP) && (vma->vm_pgoff)) { + if (vb2_get_contig_userptr(vaddr, size, &vma, &physp)) + goto fail_pages_array_alloc; + buf->vma = vma; + buf->vaddr = ioremap_nocache(physp, size); + if (!buf->vaddr) + goto fail_pages_array_alloc; + } else { + first = vaddr >> PAGE_SHIFT; + last = (vaddr + size - 1) >> PAGE_SHIFT; + buf->n_pages = last - first + 1; + buf->pages = kzalloc(buf->n_pages * sizeof(struct page *), + GFP_KERNEL); + if (!buf->pages) + goto fail_pages_array_alloc; + + /* current->mm->mmap_sem is taken by videobuf2 core */ + n_pages = get_user_pages(current, current->mm, + vaddr & PAGE_MASK, buf->n_pages, + write, 1, /* force */ + buf->pages, NULL); + if (n_pages != buf->n_pages) + goto fail_get_user_pages; + + buf->vaddr = vm_map_ram(buf->pages, buf->n_pages, -1, + PAGE_KERNEL); + if (!buf->vaddr) + goto fail_get_user_pages; + } buf->vaddr += offset; return buf; @@ -120,14 +138,20 @@ static void vb2_vmalloc_put_userptr(void *buf_priv) unsigned long vaddr = (unsigned long)buf->vaddr & PAGE_MASK; unsigned int i; - if (vaddr) - vm_unmap_ram((void *)vaddr, buf->n_pages); - for (i = 0; i < buf->n_pages; ++i) { - if (buf->write) - set_page_dirty_lock(buf->pages[i]); - put_page(buf->pages[i]); + if (buf->pages) { + if (vaddr) + vm_unmap_ram((void *)vaddr, buf->n_pages); + for (i = 0; i < buf->n_pages; ++i) { + if (buf->write) + set_page_dirty_lock(buf->pages[i]); + put_page(buf->pages[i]); + } + kfree(buf->pages); + } else { + if (buf->vma) + vb2_put_vma(buf->vma); + iounmap(buf->vaddr); } - kfree(buf->pages); kfree(buf); } diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 7d754fbcccbf..5e8b0710105b 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -819,8 +819,9 @@ static int vidioc_querycap(struct file *file, void *priv, strcpy(cap->driver, "vivi"); strcpy(cap->card, "vivi"); strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info)); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | \ + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } @@ -958,14 +959,6 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) return vb2_streamoff(&dev->vb_vidq, i); } -static int vidioc_log_status(struct file *file, void *priv) -{ - struct vivi_dev *dev = video_drvdata(file); - - v4l2_ctrl_handler_log_status(&dev->ctrl_handler, dev->v4l2_dev.name); - return 0; -} - static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) { return 0; @@ -1008,17 +1001,6 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) return 0; } -static int vidioc_subscribe_event(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) -{ - switch (sub->type) { - case V4L2_EVENT_CTRL: - return v4l2_event_subscribe(fh, sub, 0); - default: - return -EINVAL; - } -} - /* --- controls ---------------------------------------------- */ static int vivi_g_volatile_ctrl(struct v4l2_ctrl *ctrl) @@ -1209,8 +1191,8 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = { .vidioc_s_input = vidioc_s_input, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, - .vidioc_log_status = vidioc_log_status, - .vidioc_subscribe_event = vidioc_subscribe_event, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c index c15efb6e7771..7cfbc9d94a48 100644 --- a/drivers/media/video/vp27smpx.c +++ b/drivers/media/video/vp27smpx.c @@ -208,15 +208,4 @@ static struct i2c_driver vp27smpx_driver = { .id_table = vp27smpx_id, }; -static __init int init_vp27smpx(void) -{ - return i2c_add_driver(&vp27smpx_driver); -} - -static __exit void exit_vp27smpx(void) -{ - i2c_del_driver(&vp27smpx_driver); -} - -module_init(init_vp27smpx); -module_exit(exit_vp27smpx); +module_i2c_driver(vp27smpx_driver); diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index e5cad6ff64a1..2f67b4c5c823 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -588,15 +588,4 @@ static struct i2c_driver vpx3220_driver = { .id_table = vpx3220_id, }; -static __init int init_vpx3220(void) -{ - return i2c_add_driver(&vpx3220_driver); -} - -static __exit void exit_vpx3220(void) -{ - i2c_del_driver(&vpx3220_driver); -} - -module_init(init_vpx3220); -module_exit(exit_vpx3220); +module_i2c_driver(vpx3220_driver); diff --git a/drivers/media/video/vs6624.c b/drivers/media/video/vs6624.c new file mode 100644 index 000000000000..42ae9dc9c574 --- /dev/null +++ b/drivers/media/video/vs6624.c @@ -0,0 +1,928 @@ +/* + * vs6624.c ST VS6624 CMOS image sensor driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mediabus.h> + +#include "vs6624_regs.h" + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define QQVGA_WIDTH 160 +#define QQVGA_HEIGHT 120 +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 +#define QQCIF_WIDTH 88 +#define QQCIF_HEIGHT 72 + +#define MAX_FRAME_RATE 30 + +struct vs6624 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_fract frame_rate; + struct v4l2_mbus_framefmt fmt; + unsigned ce_pin; +}; + +static const struct vs6624_format { + enum v4l2_mbus_pixelcode mbus_code; + enum v4l2_colorspace colorspace; +} vs6624_formats[] = { + { + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + }, +}; + +static struct v4l2_mbus_framefmt vs6624_default_fmt = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, +}; + +static const u16 vs6624_p1[] = { + 0x8104, 0x03, + 0x8105, 0x01, + 0xc900, 0x03, + 0xc904, 0x47, + 0xc905, 0x10, + 0xc906, 0x80, + 0xc907, 0x3a, + 0x903a, 0x02, + 0x903b, 0x47, + 0x903c, 0x15, + 0xc908, 0x31, + 0xc909, 0xdc, + 0xc90a, 0x80, + 0xc90b, 0x44, + 0x9044, 0x02, + 0x9045, 0x31, + 0x9046, 0xe2, + 0xc90c, 0x07, + 0xc90d, 0xe0, + 0xc90e, 0x80, + 0xc90f, 0x47, + 0x9047, 0x90, + 0x9048, 0x83, + 0x9049, 0x81, + 0x904a, 0xe0, + 0x904b, 0x60, + 0x904c, 0x08, + 0x904d, 0x90, + 0x904e, 0xc0, + 0x904f, 0x43, + 0x9050, 0x74, + 0x9051, 0x01, + 0x9052, 0xf0, + 0x9053, 0x80, + 0x9054, 0x05, + 0x9055, 0xE4, + 0x9056, 0x90, + 0x9057, 0xc0, + 0x9058, 0x43, + 0x9059, 0xf0, + 0x905a, 0x02, + 0x905b, 0x07, + 0x905c, 0xec, + 0xc910, 0x5d, + 0xc911, 0xca, + 0xc912, 0x80, + 0xc913, 0x5d, + 0x905d, 0xa3, + 0x905e, 0x04, + 0x905f, 0xf0, + 0x9060, 0xa3, + 0x9061, 0x04, + 0x9062, 0xf0, + 0x9063, 0x22, + 0xc914, 0x72, + 0xc915, 0x92, + 0xc916, 0x80, + 0xc917, 0x64, + 0x9064, 0x74, + 0x9065, 0x01, + 0x9066, 0x02, + 0x9067, 0x72, + 0x9068, 0x95, + 0xc918, 0x47, + 0xc919, 0xf2, + 0xc91a, 0x81, + 0xc91b, 0x69, + 0x9169, 0x74, + 0x916a, 0x02, + 0x916b, 0xf0, + 0x916c, 0xec, + 0x916d, 0xb4, + 0x916e, 0x10, + 0x916f, 0x0a, + 0x9170, 0x90, + 0x9171, 0x80, + 0x9172, 0x16, + 0x9173, 0xe0, + 0x9174, 0x70, + 0x9175, 0x04, + 0x9176, 0x90, + 0x9177, 0xd3, + 0x9178, 0xc4, + 0x9179, 0xf0, + 0x917a, 0x22, + 0xc91c, 0x0a, + 0xc91d, 0xbe, + 0xc91e, 0x80, + 0xc91f, 0x73, + 0x9073, 0xfc, + 0x9074, 0xa3, + 0x9075, 0xe0, + 0x9076, 0xf5, + 0x9077, 0x82, + 0x9078, 0x8c, + 0x9079, 0x83, + 0x907a, 0xa3, + 0x907b, 0xa3, + 0x907c, 0xe0, + 0x907d, 0xfc, + 0x907e, 0xa3, + 0x907f, 0xe0, + 0x9080, 0xc3, + 0x9081, 0x9f, + 0x9082, 0xff, + 0x9083, 0xec, + 0x9084, 0x9e, + 0x9085, 0xfe, + 0x9086, 0x02, + 0x9087, 0x0a, + 0x9088, 0xea, + 0xc920, 0x47, + 0xc921, 0x38, + 0xc922, 0x80, + 0xc923, 0x89, + 0x9089, 0xec, + 0x908a, 0xd3, + 0x908b, 0x94, + 0x908c, 0x20, + 0x908d, 0x40, + 0x908e, 0x01, + 0x908f, 0x1c, + 0x9090, 0x90, + 0x9091, 0xd3, + 0x9092, 0xd4, + 0x9093, 0xec, + 0x9094, 0xf0, + 0x9095, 0x02, + 0x9096, 0x47, + 0x9097, 0x3d, + 0xc924, 0x45, + 0xc925, 0xca, + 0xc926, 0x80, + 0xc927, 0x98, + 0x9098, 0x12, + 0x9099, 0x77, + 0x909a, 0xd6, + 0x909b, 0x02, + 0x909c, 0x45, + 0x909d, 0xcd, + 0xc928, 0x20, + 0xc929, 0xd5, + 0xc92a, 0x80, + 0xc92b, 0x9e, + 0x909e, 0x90, + 0x909f, 0x82, + 0x90a0, 0x18, + 0x90a1, 0xe0, + 0x90a2, 0xb4, + 0x90a3, 0x03, + 0x90a4, 0x0e, + 0x90a5, 0x90, + 0x90a6, 0x83, + 0x90a7, 0xbf, + 0x90a8, 0xe0, + 0x90a9, 0x60, + 0x90aa, 0x08, + 0x90ab, 0x90, + 0x90ac, 0x81, + 0x90ad, 0xfc, + 0x90ae, 0xe0, + 0x90af, 0xff, + 0x90b0, 0xc3, + 0x90b1, 0x13, + 0x90b2, 0xf0, + 0x90b3, 0x90, + 0x90b4, 0x81, + 0x90b5, 0xfc, + 0x90b6, 0xe0, + 0x90b7, 0xff, + 0x90b8, 0x02, + 0x90b9, 0x20, + 0x90ba, 0xda, + 0xc92c, 0x70, + 0xc92d, 0xbc, + 0xc92e, 0x80, + 0xc92f, 0xbb, + 0x90bb, 0x90, + 0x90bc, 0x82, + 0x90bd, 0x18, + 0x90be, 0xe0, + 0x90bf, 0xb4, + 0x90c0, 0x03, + 0x90c1, 0x06, + 0x90c2, 0x90, + 0x90c3, 0xc1, + 0x90c4, 0x06, + 0x90c5, 0x74, + 0x90c6, 0x05, + 0x90c7, 0xf0, + 0x90c8, 0x90, + 0x90c9, 0xd3, + 0x90ca, 0xa0, + 0x90cb, 0x02, + 0x90cc, 0x70, + 0x90cd, 0xbf, + 0xc930, 0x72, + 0xc931, 0x21, + 0xc932, 0x81, + 0xc933, 0x3b, + 0x913b, 0x7d, + 0x913c, 0x02, + 0x913d, 0x7f, + 0x913e, 0x7b, + 0x913f, 0x02, + 0x9140, 0x72, + 0x9141, 0x25, + 0xc934, 0x28, + 0xc935, 0xae, + 0xc936, 0x80, + 0xc937, 0xd2, + 0x90d2, 0xf0, + 0x90d3, 0x90, + 0x90d4, 0xd2, + 0x90d5, 0x0a, + 0x90d6, 0x02, + 0x90d7, 0x28, + 0x90d8, 0xb4, + 0xc938, 0x28, + 0xc939, 0xb1, + 0xc93a, 0x80, + 0xc93b, 0xd9, + 0x90d9, 0x90, + 0x90da, 0x83, + 0x90db, 0xba, + 0x90dc, 0xe0, + 0x90dd, 0xff, + 0x90de, 0x90, + 0x90df, 0xd2, + 0x90e0, 0x08, + 0x90e1, 0xe0, + 0x90e2, 0xe4, + 0x90e3, 0xef, + 0x90e4, 0xf0, + 0x90e5, 0xa3, + 0x90e6, 0xe0, + 0x90e7, 0x74, + 0x90e8, 0xff, + 0x90e9, 0xf0, + 0x90ea, 0x90, + 0x90eb, 0xd2, + 0x90ec, 0x0a, + 0x90ed, 0x02, + 0x90ee, 0x28, + 0x90ef, 0xb4, + 0xc93c, 0x29, + 0xc93d, 0x79, + 0xc93e, 0x80, + 0xc93f, 0xf0, + 0x90f0, 0xf0, + 0x90f1, 0x90, + 0x90f2, 0xd2, + 0x90f3, 0x0e, + 0x90f4, 0x02, + 0x90f5, 0x29, + 0x90f6, 0x7f, + 0xc940, 0x29, + 0xc941, 0x7c, + 0xc942, 0x80, + 0xc943, 0xf7, + 0x90f7, 0x90, + 0x90f8, 0x83, + 0x90f9, 0xba, + 0x90fa, 0xe0, + 0x90fb, 0xff, + 0x90fc, 0x90, + 0x90fd, 0xd2, + 0x90fe, 0x0c, + 0x90ff, 0xe0, + 0x9100, 0xe4, + 0x9101, 0xef, + 0x9102, 0xf0, + 0x9103, 0xa3, + 0x9104, 0xe0, + 0x9105, 0x74, + 0x9106, 0xff, + 0x9107, 0xf0, + 0x9108, 0x90, + 0x9109, 0xd2, + 0x910a, 0x0e, + 0x910b, 0x02, + 0x910c, 0x29, + 0x910d, 0x7f, + 0xc944, 0x2a, + 0xc945, 0x42, + 0xc946, 0x81, + 0xc947, 0x0e, + 0x910e, 0xf0, + 0x910f, 0x90, + 0x9110, 0xd2, + 0x9111, 0x12, + 0x9112, 0x02, + 0x9113, 0x2a, + 0x9114, 0x48, + 0xc948, 0x2a, + 0xc949, 0x45, + 0xc94a, 0x81, + 0xc94b, 0x15, + 0x9115, 0x90, + 0x9116, 0x83, + 0x9117, 0xba, + 0x9118, 0xe0, + 0x9119, 0xff, + 0x911a, 0x90, + 0x911b, 0xd2, + 0x911c, 0x10, + 0x911d, 0xe0, + 0x911e, 0xe4, + 0x911f, 0xef, + 0x9120, 0xf0, + 0x9121, 0xa3, + 0x9122, 0xe0, + 0x9123, 0x74, + 0x9124, 0xff, + 0x9125, 0xf0, + 0x9126, 0x90, + 0x9127, 0xd2, + 0x9128, 0x12, + 0x9129, 0x02, + 0x912a, 0x2a, + 0x912b, 0x48, + 0xc900, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_p2[] = { + 0x806f, 0x01, + 0x058c, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_run_setup[] = { + 0x1d18, 0x00, /* Enableconstrainedwhitebalance */ + VS6624_PEAK_MIN_OUT_G_MSB, 0x3c, /* Damper PeakGain Output MSB */ + VS6624_PEAK_MIN_OUT_G_LSB, 0x66, /* Damper PeakGain Output LSB */ + VS6624_CM_LOW_THR_MSB, 0x65, /* Damper Low MSB */ + VS6624_CM_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_CM_HIGH_THR_MSB, 0x66, /* Damper High MSB */ + VS6624_CM_HIGH_THR_LSB, 0x62, /* Damper High LSB */ + VS6624_CM_MIN_OUT_MSB, 0x00, /* Damper Min output MSB */ + VS6624_CM_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_NORA_DISABLE, 0x00, /* Nora fDisable */ + VS6624_NORA_USAGE, 0x04, /* Nora usage */ + VS6624_NORA_LOW_THR_MSB, 0x63, /* Damper Low MSB Changed 0x63 to 0x65 */ + VS6624_NORA_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_NORA_HIGH_THR_MSB, 0x68, /* Damper High MSB */ + VS6624_NORA_HIGH_THR_LSB, 0xdd, /* Damper High LSB */ + VS6624_NORA_MIN_OUT_MSB, 0x3a, /* Damper Min output MSB */ + VS6624_NORA_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_F2B_DISABLE, 0x00, /* Disable */ + 0x1d8a, 0x30, /* MAXWeightHigh */ + 0x1d91, 0x62, /* fpDamperLowThresholdHigh MSB */ + 0x1d92, 0x4a, /* fpDamperLowThresholdHigh LSB */ + 0x1d95, 0x65, /* fpDamperHighThresholdHigh MSB */ + 0x1d96, 0x0e, /* fpDamperHighThresholdHigh LSB */ + 0x1da1, 0x3a, /* fpMinimumDamperOutputLow MSB */ + 0x1da2, 0xb8, /* fpMinimumDamperOutputLow LSB */ + 0x1e08, 0x06, /* MAXWeightLow */ + 0x1e0a, 0x0a, /* MAXWeightHigh */ + 0x1601, 0x3a, /* Red A MSB */ + 0x1602, 0x14, /* Red A LSB */ + 0x1605, 0x3b, /* Blue A MSB */ + 0x1606, 0x85, /* BLue A LSB */ + 0x1609, 0x3b, /* RED B MSB */ + 0x160a, 0x85, /* RED B LSB */ + 0x160d, 0x3a, /* Blue B MSB */ + 0x160e, 0x14, /* Blue B LSB */ + 0x1611, 0x30, /* Max Distance from Locus MSB */ + 0x1612, 0x8f, /* Max Distance from Locus MSB */ + 0x1614, 0x01, /* Enable constrainer */ + 0x0000, 0x00, +}; + +static const u16 vs6624_default[] = { + VS6624_CONTRAST0, 0x84, + VS6624_SATURATION0, 0x75, + VS6624_GAMMA0, 0x11, + VS6624_CONTRAST1, 0x84, + VS6624_SATURATION1, 0x75, + VS6624_GAMMA1, 0x11, + VS6624_MAN_RG, 0x80, + VS6624_MAN_GG, 0x80, + VS6624_MAN_BG, 0x80, + VS6624_WB_MODE, 0x1, + VS6624_EXPO_COMPENSATION, 0xfe, + VS6624_EXPO_METER, 0x0, + VS6624_LIGHT_FREQ, 0x64, + VS6624_PEAK_GAIN, 0xe, + VS6624_PEAK_LOW_THR, 0x28, + VS6624_HMIRROR0, 0x0, + VS6624_VFLIP0, 0x0, + VS6624_ZOOM_HSTEP0_MSB, 0x0, + VS6624_ZOOM_HSTEP0_LSB, 0x1, + VS6624_ZOOM_VSTEP0_MSB, 0x0, + VS6624_ZOOM_VSTEP0_LSB, 0x1, + VS6624_PAN_HSTEP0_MSB, 0x0, + VS6624_PAN_HSTEP0_LSB, 0xf, + VS6624_PAN_VSTEP0_MSB, 0x0, + VS6624_PAN_VSTEP0_LSB, 0xf, + VS6624_SENSOR_MODE, 0x1, + VS6624_SYNC_CODE_SETUP, 0x21, + VS6624_DISABLE_FR_DAMPER, 0x0, + VS6624_FR_DEN, 0x1, + VS6624_FR_NUM_LSB, 0xf, + VS6624_INIT_PIPE_SETUP, 0x0, + VS6624_IMG_FMT0, 0x0, + VS6624_YUV_SETUP, 0x1, + VS6624_IMAGE_SIZE0, 0x2, + 0x0000, 0x00, +}; + +static inline struct vs6624 *to_vs6624(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vs6624, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vs6624, hdl)->sd; +} + +static int vs6624_read(struct v4l2_subdev *sd, u16 index) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = index >> 8; + buf[1] = index; + i2c_master_send(client, buf, 2); + i2c_master_recv(client, buf, 1); + + return buf[0]; +} + +static int vs6624_write(struct v4l2_subdev *sd, u16 index, + u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[3]; + + buf[0] = index >> 8; + buf[1] = index; + buf[2] = value; + + return i2c_master_send(client, buf, 3); +} + +static int vs6624_writeregs(struct v4l2_subdev *sd, const u16 *regs) +{ + u16 reg; + u8 data; + + while (*regs != 0x00) { + reg = *regs++; + data = *regs++; + + vs6624_write(sd, reg, data); + } + return 0; +} + +static int vs6624_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + vs6624_write(sd, VS6624_CONTRAST0, ctrl->val); + break; + case V4L2_CID_SATURATION: + vs6624_write(sd, VS6624_SATURATION0, ctrl->val); + break; + case V4L2_CID_HFLIP: + vs6624_write(sd, VS6624_HMIRROR0, ctrl->val); + break; + case V4L2_CID_VFLIP: + vs6624_write(sd, VS6624_VFLIP0, ctrl->val); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vs6624_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(vs6624_formats)) + return -EINVAL; + + *code = vs6624_formats[index].mbus_code; + return 0; +} + +static int vs6624_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + int index; + + for (index = 0; index < ARRAY_SIZE(vs6624_formats); index++) + if (vs6624_formats[index].mbus_code == fmt->code) + break; + if (index >= ARRAY_SIZE(vs6624_formats)) { + /* default to first format */ + index = 0; + fmt->code = vs6624_formats[0].mbus_code; + } + + /* sensor mode is VGA */ + if (fmt->width > VGA_WIDTH) + fmt->width = VGA_WIDTH; + if (fmt->height > VGA_HEIGHT) + fmt->height = VGA_HEIGHT; + fmt->width = fmt->width & (~3); + fmt->height = fmt->height & (~3); + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = vs6624_formats[index].colorspace; + return 0; +} + +static int vs6624_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + int ret; + + ret = vs6624_try_mbus_fmt(sd, fmt); + if (ret) + return ret; + + /* set image format */ + switch (fmt->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x1); + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x3); + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + vs6624_write(sd, VS6624_IMG_FMT0, 0x4); + vs6624_write(sd, VS6624_RGB_SETUP, 0x0); + break; + default: + return -EINVAL; + } + + /* set image size */ + if ((fmt->width == VGA_WIDTH) && (fmt->height == VGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x2); + else if ((fmt->width == QVGA_WIDTH) && (fmt->height == QVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x4); + else if ((fmt->width == QQVGA_WIDTH) && (fmt->height == QQVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x6); + else if ((fmt->width == CIF_WIDTH) && (fmt->height == CIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x3); + else if ((fmt->width == QCIF_WIDTH) && (fmt->height == QCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x5); + else if ((fmt->width == QQCIF_WIDTH) && (fmt->height == QQCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x7); + else { + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x8); + vs6624_write(sd, VS6624_MAN_HSIZE0_MSB, fmt->width >> 8); + vs6624_write(sd, VS6624_MAN_HSIZE0_LSB, fmt->width & 0xFF); + vs6624_write(sd, VS6624_MAN_VSIZE0_MSB, fmt->height >> 8); + vs6624_write(sd, VS6624_MAN_VSIZE0_LSB, fmt->height & 0xFF); + vs6624_write(sd, VS6624_CROP_CTRL0, 0x1); + } + + sensor->fmt = *fmt; + + return 0; +} + +static int vs6624_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + + *fmt = sensor->fmt; + return 0; +} + +static int vs6624_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(*cp)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + cp->timeperframe.numerator = sensor->frame_rate.denominator; + cp->timeperframe.denominator = sensor->frame_rate.numerator; + return 0; +} + +static int vs6624_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + if (tpf->numerator == 0 || tpf->denominator == 0 + || (tpf->denominator > tpf->numerator * MAX_FRAME_RATE)) { + /* reset to max frame rate */ + tpf->numerator = 1; + tpf->denominator = MAX_FRAME_RATE; + } + sensor->frame_rate.numerator = tpf->denominator; + sensor->frame_rate.denominator = tpf->numerator; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + return 0; +} + +static int vs6624_s_stream(struct v4l2_subdev *sd, int enable) +{ + if (enable) + vs6624_write(sd, VS6624_USER_CMD, 0x2); + else + vs6624_write(sd, VS6624_USER_CMD, 0x4); + udelay(100); + return 0; +} + +static int vs6624_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + rev = (vs6624_read(sd, VS6624_FW_VSN_MAJOR) << 8) + | vs6624_read(sd, VS6624_FW_VSN_MINOR); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VS6624, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vs6624_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = vs6624_read(sd, reg->reg & 0xffff); + reg->size = 1; + return 0; +} + +static int vs6624_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + vs6624_write(sd, reg->reg & 0xffff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops vs6624_ctrl_ops = { + .s_ctrl = vs6624_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops vs6624_core_ops = { + .g_chip_ident = vs6624_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = vs6624_g_register, + .s_register = vs6624_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops vs6624_video_ops = { + .enum_mbus_fmt = vs6624_enum_mbus_fmt, + .try_mbus_fmt = vs6624_try_mbus_fmt, + .s_mbus_fmt = vs6624_s_mbus_fmt, + .g_mbus_fmt = vs6624_g_mbus_fmt, + .s_parm = vs6624_s_parm, + .g_parm = vs6624_g_parm, + .s_stream = vs6624_s_stream, +}; + +static const struct v4l2_subdev_ops vs6624_ops = { + .core = &vs6624_core_ops, + .video = &vs6624_video_ops, +}; + +static int __devinit vs6624_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vs6624 *sensor; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + const unsigned *ce; + int ret; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EIO; + + ce = client->dev.platform_data; + if (ce == NULL) + return -EINVAL; + + ret = gpio_request(*ce, "VS6624 Chip Enable"); + if (ret) { + v4l_err(client, "failed to request GPIO %d\n", *ce); + return ret; + } + gpio_direction_output(*ce, 1); + /* wait 100ms before any further i2c writes are performed */ + mdelay(100); + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) { + gpio_free(*ce); + return -ENOMEM; + } + + sd = &sensor->sd; + v4l2_i2c_subdev_init(sd, client, &vs6624_ops); + + vs6624_writeregs(sd, vs6624_p1); + vs6624_write(sd, VS6624_MICRO_EN, 0x2); + vs6624_write(sd, VS6624_DIO_EN, 0x1); + mdelay(10); + vs6624_writeregs(sd, vs6624_p2); + + vs6624_writeregs(sd, vs6624_default); + vs6624_write(sd, VS6624_HSYNC_SETUP, 0xF); + vs6624_writeregs(sd, vs6624_run_setup); + + /* set frame rate */ + sensor->frame_rate.numerator = MAX_FRAME_RATE; + sensor->frame_rate.denominator = 1; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + + sensor->fmt = vs6624_default_fmt; + sensor->ce_pin = *ce; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + hdl = &sensor->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x87); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFF, 1, 0x78); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + return err; + } + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + } + return ret; +} + +static int __devexit vs6624_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vs6624 *sensor = to_vs6624(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(sensor->ce_pin); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id vs6624_id[] = { + {"vs6624", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, vs6624_id); + +static struct i2c_driver vs6624_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vs6624", + }, + .probe = vs6624_probe, + .remove = __devexit_p(vs6624_remove), + .id_table = vs6624_id, +}; + +static __init int vs6624_init(void) +{ + return i2c_add_driver(&vs6624_driver); +} + +static __exit void vs6624_exit(void) +{ + i2c_del_driver(&vs6624_driver); +} + +module_init(vs6624_init); +module_exit(vs6624_exit); + +MODULE_DESCRIPTION("VS6624 sensor driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/vs6624_regs.h b/drivers/media/video/vs6624_regs.h new file mode 100644 index 000000000000..6ba2ee25827e --- /dev/null +++ b/drivers/media/video/vs6624_regs.h @@ -0,0 +1,337 @@ +/* + * vs6624 - ST VS6624 CMOS image sensor registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _VS6624_REGS_H_ +#define _VS6624_REGS_H_ + +/* low level control registers */ +#define VS6624_MICRO_EN 0xC003 /* power enable for all MCU clock */ +#define VS6624_DIO_EN 0xC044 /* enable digital I/O */ +/* device parameters */ +#define VS6624_DEV_ID_MSB 0x0001 /* device id MSB */ +#define VS6624_DEV_ID_LSB 0x0002 /* device id LSB */ +#define VS6624_FW_VSN_MAJOR 0x0004 /* firmware version major */ +#define VS6624_FW_VSN_MINOR 0x0006 /* firmware version minor */ +#define VS6624_PATCH_VSN_MAJOR 0x0008 /* patch version major */ +#define VS6624_PATCH_VSN_MINOR 0x000A /* patch version minor */ +/* host interface manager control */ +#define VS6624_USER_CMD 0x0180 /* user level control of operating states */ +/* host interface manager status */ +#define VS6624_STATE 0x0202 /* current state of the mode manager */ +/* run mode control */ +#define VS6624_METER_ON 0x0280 /* if false AE and AWB are disabled */ +/* mode setup */ +#define VS6624_ACTIVE_PIPE_SETUP 0x0302 /* select the active bank for non view live mode */ +#define VS6624_SENSOR_MODE 0x0308 /* select the different sensor mode */ +/* pipe setup bank0 */ +#define VS6624_IMAGE_SIZE0 0x0380 /* required output dimension */ +#define VS6624_MAN_HSIZE0_MSB 0x0383 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE0_LSB 0x0384 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE0_MSB 0x0387 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE0_LSB 0x0388 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP0_MSB 0x038B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP0_LSB 0x038C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP0_MSB 0x038F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP0_LSB 0x0390 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL0 0x0392 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP0_MSB 0x0395 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP0_LSB 0x0396 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP0_MSB 0x0399 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP0_LSB 0x039A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL0 0x039C /* control pan operation */ +#define VS6624_CROP_CTRL0 0x039E /* select cropping mode */ +#define VS6624_CROP_HSTART0_MSB 0x03A1 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART0_LSB 0x03A2 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE0_MSB 0x03A5 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE0_LSB 0x03A6 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART0_MSB 0x03A9 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART0_LSB 0x03AA /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE0_MSB 0x03AD /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE0_LSB 0x03AE /* set the cropping V size LSB */ +#define VS6624_IMG_FMT0 0x03B0 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN0 0x03B2 /* set bayer output alignment */ +#define VS6624_CONTRAST0 0x03B4 /* contrast control for output */ +#define VS6624_SATURATION0 0x03B6 /* saturation control for output */ +#define VS6624_GAMMA0 0x03B8 /* gamma settings */ +#define VS6624_HMIRROR0 0x03BA /* horizontal image orientation flip */ +#define VS6624_VFLIP0 0x03BC /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID0 0x03BE /* logical DMA channel number */ +/* pipe setup bank1 */ +#define VS6624_IMAGE_SIZE1 0x0400 /* required output dimension */ +#define VS6624_MAN_HSIZE1_MSB 0x0403 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE1_LSB 0x0404 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE1_MSB 0x0407 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE1_LSB 0x0408 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP1_MSB 0x040B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP1_LSB 0x040C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP1_MSB 0x040F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP1_LSB 0x0410 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL1 0x0412 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP1_MSB 0x0415 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP1_LSB 0x0416 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP1_MSB 0x0419 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP1_LSB 0x041A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL1 0x041C /* control pan operation */ +#define VS6624_CROP_CTRL1 0x041E /* select cropping mode */ +#define VS6624_CROP_HSTART1_MSB 0x0421 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART1_LSB 0x0422 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE1_MSB 0x0425 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE1_LSB 0x0426 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART1_MSB 0x0429 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART1_LSB 0x042A /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE1_MSB 0x042D /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE1_LSB 0x042E /* set the cropping V size LSB */ +#define VS6624_IMG_FMT1 0x0430 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN1 0x0432 /* set bayer output alignment */ +#define VS6624_CONTRAST1 0x0434 /* contrast control for output */ +#define VS6624_SATURATION1 0x0436 /* saturation control for output */ +#define VS6624_GAMMA1 0x0438 /* gamma settings */ +#define VS6624_HMIRROR1 0x043A /* horizontal image orientation flip */ +#define VS6624_VFLIP1 0x043C /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID1 0x043E /* logical DMA channel number */ +/* view live control */ +#define VS6624_VIEW_LIVE_EN 0x0480 /* enable view live mode */ +#define VS6624_INIT_PIPE_SETUP 0x0482 /* select initial pipe setup bank */ +/* view live status */ +#define VS6624_CUR_PIPE_SETUP 0x0500 /* indicates most recently applied setup bank */ +/* power management */ +#define VS6624_TIME_TO_POWER_DOWN 0x0580 /* automatically transition time to stop mode */ +/* video timing parameter host inputs */ +#define VS6624_EXT_CLK_FREQ_NUM_MSB 0x0605 /* external clock frequency numerator MSB */ +#define VS6624_EXT_CLK_FREQ_NUM_LSB 0x0606 /* external clock frequency numerator LSB */ +#define VS6624_EXT_CLK_FREQ_DEN 0x0608 /* external clock frequency denominator */ +/* video timing control */ +#define VS6624_SYS_CLK_MODE 0x0880 /* decides system clock frequency */ +/* frame dimension parameter host inputs */ +#define VS6624_LIGHT_FREQ 0x0C80 /* AC frequency used for flicker free time */ +#define VS6624_FLICKER_COMPAT 0x0C82 /* flicker compatible frame length */ +/* static frame rate control */ +#define VS6624_FR_NUM_MSB 0x0D81 /* desired frame rate numerator MSB */ +#define VS6624_FR_NUM_LSB 0x0D82 /* desired frame rate numerator LSB */ +#define VS6624_FR_DEN 0x0D84 /* desired frame rate denominator */ +/* automatic frame rate control */ +#define VS6624_DISABLE_FR_DAMPER 0x0E80 /* defines frame rate mode */ +#define VS6624_MIN_DAMPER_OUT_MSB 0x0E8C /* minimum frame rate MSB */ +#define VS6624_MIN_DAMPER_OUT_LSB 0x0E8A /* minimum frame rate LSB */ +/* exposure controls */ +#define VS6624_EXPO_MODE 0x1180 /* exposure mode */ +#define VS6624_EXPO_METER 0x1182 /* weights to be associated with the zones */ +#define VS6624_EXPO_TIME_NUM 0x1184 /* exposure time numerator */ +#define VS6624_EXPO_TIME_DEN 0x1186 /* exposure time denominator */ +#define VS6624_EXPO_TIME_MSB 0x1189 /* exposure time for the Manual Mode MSB */ +#define VS6624_EXPO_TIME_LSB 0x118A /* exposure time for the Manual Mode LSB */ +#define VS6624_EXPO_COMPENSATION 0x1190 /* exposure compensation */ +#define VS6624_DIRECT_COARSE_MSB 0x1195 /* coarse integration lines for Direct Mode MSB */ +#define VS6624_DIRECT_COARSE_LSB 0x1196 /* coarse integration lines for Direct Mode LSB */ +#define VS6624_DIRECT_FINE_MSB 0x1199 /* fine integration pixels for Direct Mode MSB */ +#define VS6624_DIRECT_FINE_LSB 0x119A /* fine integration pixels for Direct Mode LSB */ +#define VS6624_DIRECT_ANAL_GAIN_MSB 0x119D /* analog gain for Direct Mode MSB */ +#define VS6624_DIRECT_ANAL_GAIN_LSB 0x119E /* analog gain for Direct Mode LSB */ +#define VS6624_DIRECT_DIGI_GAIN_MSB 0x11A1 /* digital gain for Direct Mode MSB */ +#define VS6624_DIRECT_DIGI_GAIN_LSB 0x11A2 /* digital gain for Direct Mode LSB */ +#define VS6624_FLASH_COARSE_MSB 0x11A5 /* coarse integration lines for Flash Gun Mode MSB */ +#define VS6624_FLASH_COARSE_LSB 0x11A6 /* coarse integration lines for Flash Gun Mode LSB */ +#define VS6624_FLASH_FINE_MSB 0x11A9 /* fine integration pixels for Flash Gun Mode MSB */ +#define VS6624_FLASH_FINE_LSB 0x11AA /* fine integration pixels for Flash Gun Mode LSB */ +#define VS6624_FLASH_ANAL_GAIN_MSB 0x11AD /* analog gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_ANAL_GAIN_LSB 0x11AE /* analog gain for Flash Gun Mode LSB */ +#define VS6624_FLASH_DIGI_GAIN_MSB 0x11B1 /* digital gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_DIGI_GAIN_LSB 0x11B2 /* digital gain for Flash Gun Mode LSB */ +#define VS6624_FREEZE_AE 0x11B4 /* freeze auto exposure */ +#define VS6624_MAX_INT_TIME_MSB 0x11B7 /* user maximum integration time MSB */ +#define VS6624_MAX_INT_TIME_LSB 0x11B8 /* user maximum integration time LSB */ +#define VS6624_FLASH_AG_THR_MSB 0x11BB /* recommend flash gun analog gain threshold MSB */ +#define VS6624_FLASH_AG_THR_LSB 0x11BC /* recommend flash gun analog gain threshold LSB */ +#define VS6624_ANTI_FLICKER_MODE 0x11C0 /* anti flicker mode */ +/* white balance control */ +#define VS6624_WB_MODE 0x1480 /* set white balance mode */ +#define VS6624_MAN_RG 0x1482 /* user setting for red channel gain */ +#define VS6624_MAN_GG 0x1484 /* user setting for green channel gain */ +#define VS6624_MAN_BG 0x1486 /* user setting for blue channel gain */ +#define VS6624_FLASH_RG_MSB 0x148B /* red gain for Flash Gun MSB */ +#define VS6624_FLASH_RG_LSB 0x148C /* red gain for Flash Gun LSB */ +#define VS6624_FLASH_GG_MSB 0x148F /* green gain for Flash Gun MSB */ +#define VS6624_FLASH_GG_LSB 0x1490 /* green gain for Flash Gun LSB */ +#define VS6624_FLASH_BG_MSB 0x1493 /* blue gain for Flash Gun MSB */ +#define VS6624_FLASH_BG_LSB 0x1494 /* blue gain for Flash Gun LSB */ +/* sensor setup */ +#define VS6624_BC_OFFSET 0x1990 /* Black Correction Offset */ +/* image stability */ +#define VS6624_STABLE_WB 0x1900 /* white balance stable */ +#define VS6624_STABLE_EXPO 0x1902 /* exposure stable */ +#define VS6624_STABLE 0x1906 /* system stable */ +/* flash control */ +#define VS6624_FLASH_MODE 0x1A80 /* flash mode */ +#define VS6624_FLASH_OFF_LINE_MSB 0x1A83 /* off line at flash pulse mode MSB */ +#define VS6624_FLASH_OFF_LINE_LSB 0x1A84 /* off line at flash pulse mode LSB */ +/* flash status */ +#define VS6624_FLASH_RECOM 0x1B00 /* flash gun is recommended */ +#define VS6624_FLASH_GRAB_COMPLETE 0x1B02 /* flash gun image has been grabbed */ +/* scythe filter controls */ +#define VS6624_SCYTHE_FILTER 0x1D80 /* disable scythe defect correction */ +/* jack filter controls */ +#define VS6624_JACK_FILTER 0x1E00 /* disable jack defect correction */ +/* demosaic control */ +#define VS6624_ANTI_ALIAS_FILTER 0x1E80 /* anti alias filter suppress */ +/* color matrix dampers */ +#define VS6624_CM_DISABLE 0x1F00 /* disable color matrix damper */ +#define VS6624_CM_LOW_THR_MSB 0x1F03 /* low threshold for exposure MSB */ +#define VS6624_CM_LOW_THR_LSB 0x1F04 /* low threshold for exposure LSB */ +#define VS6624_CM_HIGH_THR_MSB 0x1F07 /* high threshold for exposure MSB */ +#define VS6624_CM_HIGH_THR_LSB 0x1F08 /* high threshold for exposure LSB */ +#define VS6624_CM_MIN_OUT_MSB 0x1F0B /* minimum possible damper output MSB */ +#define VS6624_CM_MIN_OUT_LSB 0x1F0C /* minimum possible damper output LSB */ +/* peaking control */ +#define VS6624_PEAK_GAIN 0x2000 /* controls peaking gain */ +#define VS6624_PEAK_G_DISABLE 0x2002 /* disable peak gain damping */ +#define VS6624_PEAK_LOW_THR_G_MSB 0x2005 /* low threshold for exposure for gain MSB */ +#define VS6624_PEAK_LOW_THR_G_LSB 0x2006 /* low threshold for exposure for gain LSB */ +#define VS6624_PEAK_HIGH_THR_G_MSB 0x2009 /* high threshold for exposure for gain MSB */ +#define VS6624_PEAK_HIGH_THR_G_LSB 0x200A /* high threshold for exposure for gain LSB */ +#define VS6624_PEAK_MIN_OUT_G_MSB 0x200D /* minimum damper output for gain MSB */ +#define VS6624_PEAK_MIN_OUT_G_LSB 0x200E /* minimum damper output for gain LSB */ +#define VS6624_PEAK_LOW_THR 0x2010 /* adjust degree of coring */ +#define VS6624_PEAK_C_DISABLE 0x2012 /* disable coring damping */ +#define VS6624_PEAK_HIGH_THR 0x2014 /* adjust maximum gain */ +#define VS6624_PEAK_LOW_THR_C_MSB 0x2017 /* low threshold for exposure for coring MSB */ +#define VS6624_PEAK_LOW_THR_C_LSB 0x2018 /* low threshold for exposure for coring LSB */ +#define VS6624_PEAK_HIGH_THR_C_MSB 0x201B /* high threshold for exposure for coring MSB */ +#define VS6624_PEAK_HIGH_THR_C_LSB 0x201C /* high threshold for exposure for coring LSB */ +#define VS6624_PEAK_MIN_OUT_C_MSB 0x201F /* minimum damper output for coring MSB */ +#define VS6624_PEAK_MIN_OUT_C_LSB 0x2020 /* minimum damper output for coring LSB */ +/* pipe 0 RGB to YUV matrix manual control */ +#define VS6624_RYM0_MAN_CTRL 0x2180 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM0_W00_MSB 0x2183 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W00_LSB 0x2184 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W01_MSB 0x2187 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W01_LSB 0x2188 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W02_MSB 0x218C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W02_LSB 0x218D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W10_MSB 0x2190 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W10_LSB 0x218F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W11_MSB 0x2193 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W11_LSB 0x2194 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W12_MSB 0x2197 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W12_LSB 0x2198 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W20_MSB 0x219B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W20_LSB 0x219C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W21_MSB 0x21A0 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W21_LSB 0x219F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W22_MSB 0x21A3 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W22_LSB 0x21A4 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_YINY_MSB 0x21A7 /* Y in Y MSB */ +#define VS6624_RYM0_YINY_LSB 0x21A8 /* Y in Y LSB */ +#define VS6624_RYM0_YINCB_MSB 0x21AB /* Y in Cb MSB */ +#define VS6624_RYM0_YINCB_LSB 0x21AC /* Y in Cb LSB */ +#define VS6624_RYM0_YINCR_MSB 0x21B0 /* Y in Cr MSB */ +#define VS6624_RYM0_YINCR_LSB 0x21AF /* Y in Cr LSB */ +/* pipe 1 RGB to YUV matrix manual control */ +#define VS6624_RYM1_MAN_CTRL 0x2200 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM1_W00_MSB 0x2203 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W00_LSB 0x2204 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W01_MSB 0x2207 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W01_LSB 0x2208 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W02_MSB 0x220C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W02_LSB 0x220D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W10_MSB 0x2210 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W10_LSB 0x220F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W11_MSB 0x2213 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W11_LSB 0x2214 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W12_MSB 0x2217 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W12_LSB 0x2218 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W20_MSB 0x221B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W20_LSB 0x221C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W21_MSB 0x2220 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W21_LSB 0x221F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W22_MSB 0x2223 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W22_LSB 0x2224 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_YINY_MSB 0x2227 /* Y in Y MSB */ +#define VS6624_RYM1_YINY_LSB 0x2228 /* Y in Y LSB */ +#define VS6624_RYM1_YINCB_MSB 0x222B /* Y in Cb MSB */ +#define VS6624_RYM1_YINCB_LSB 0x222C /* Y in Cb LSB */ +#define VS6624_RYM1_YINCR_MSB 0x2220 /* Y in Cr MSB */ +#define VS6624_RYM1_YINCR_LSB 0x222F /* Y in Cr LSB */ +/* pipe 0 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL0 0x2280 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R0 0x2282 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G0 0x2284 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B0 0x2286 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R0 0x2288 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G0 0x228A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B0 0x228C /* unpeaked blue channel gamma value */ +/* pipe 1 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL1 0x2300 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R1 0x2302 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G1 0x2304 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B1 0x2306 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R1 0x2308 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G1 0x230A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B1 0x230C /* unpeaked blue channel gamma value */ +/* fade to black */ +#define VS6624_F2B_DISABLE 0x2480 /* disable fade to black */ +#define VS6624_F2B_BLACK_VAL_MSB 0x2483 /* black value MSB */ +#define VS6624_F2B_BLACK_VAL_LSB 0x2484 /* black value LSB */ +#define VS6624_F2B_LOW_THR_MSB 0x2487 /* low threshold for exposure MSB */ +#define VS6624_F2B_LOW_THR_LSB 0x2488 /* low threshold for exposure LSB */ +#define VS6624_F2B_HIGH_THR_MSB 0x248B /* high threshold for exposure MSB */ +#define VS6624_F2B_HIGH_THR_LSB 0x248C /* high threshold for exposure LSB */ +#define VS6624_F2B_MIN_OUT_MSB 0x248F /* minimum damper output MSB */ +#define VS6624_F2B_MIN_OUT_LSB 0x2490 /* minimum damper output LSB */ +/* output formatter control */ +#define VS6624_CODE_CK_EN 0x2580 /* code check enable */ +#define VS6624_BLANK_FMT 0x2582 /* blank format */ +#define VS6624_SYNC_CODE_SETUP 0x2584 /* sync code setup */ +#define VS6624_HSYNC_SETUP 0x2586 /* H sync setup */ +#define VS6624_VSYNC_SETUP 0x2588 /* V sync setup */ +#define VS6624_PCLK_SETUP 0x258A /* PCLK setup */ +#define VS6624_PCLK_EN 0x258C /* PCLK enable */ +#define VS6624_OPF_SP_SETUP 0x258E /* output formatter sp setup */ +#define VS6624_BLANK_DATA_MSB 0x2590 /* blank data MSB */ +#define VS6624_BLANK_DATA_LSB 0x2592 /* blank data LSB */ +#define VS6624_RGB_SETUP 0x2594 /* RGB setup */ +#define VS6624_YUV_SETUP 0x2596 /* YUV setup */ +#define VS6624_VSYNC_RIS_COARSE_H 0x2598 /* V sync rising coarse high */ +#define VS6624_VSYNC_RIS_COARSE_L 0x259A /* V sync rising coarse low */ +#define VS6624_VSYNC_RIS_FINE_H 0x259C /* V sync rising fine high */ +#define VS6624_VSYNC_RIS_FINE_L 0x259E /* V sync rising fine low */ +#define VS6624_VSYNC_FALL_COARSE_H 0x25A0 /* V sync falling coarse high */ +#define VS6624_VSYNC_FALL_COARSE_L 0x25A2 /* V sync falling coarse low */ +#define VS6624_VSYNC_FALL_FINE_H 0x25A4 /* V sync falling fine high */ +#define VS6624_VSYNC_FALL_FINE_L 0x25A6 /* V sync falling fine low */ +#define VS6624_HSYNC_RIS_H 0x25A8 /* H sync rising high */ +#define VS6624_HSYNC_RIS_L 0x25AA /* H sync rising low */ +#define VS6624_HSYNC_FALL_H 0x25AC /* H sync falling high */ +#define VS6624_HSYNC_FALL_L 0x25AE /* H sync falling low */ +#define VS6624_OUT_IF 0x25B0 /* output interface */ +#define VS6624_CCP_EXT_DATA 0x25B2 /* CCP extra data */ +/* NoRA controls */ +#define VS6624_NORA_DISABLE 0x2600 /* NoRA control mode */ +#define VS6624_NORA_USAGE 0x2602 /* usage */ +#define VS6624_NORA_SPLIT_KN 0x2604 /* split kn */ +#define VS6624_NORA_SPLIT_NI 0x2606 /* split ni */ +#define VS6624_NORA_TIGHT_G 0x2608 /* tight green */ +#define VS6624_NORA_DISABLE_NP 0x260A /* disable noro promoting */ +#define VS6624_NORA_LOW_THR_MSB 0x260D /* low threshold for exposure MSB */ +#define VS6624_NORA_LOW_THR_LSB 0x260E /* low threshold for exposure LSB */ +#define VS6624_NORA_HIGH_THR_MSB 0x2611 /* high threshold for exposure MSB */ +#define VS6624_NORA_HIGH_THR_LSB 0x2612 /* high threshold for exposure LSB */ +#define VS6624_NORA_MIN_OUT_MSB 0x2615 /* minimum damper output MSB */ +#define VS6624_NORA_MIN_OUT_LSB 0x2616 /* minimum damper output LSB */ + +#endif diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 453dbbd1e6e8..7fd7ac567e1a 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -129,9 +129,9 @@ MODULE_LICENSE("GPL"); MODULE_VERSION("0.33.1"); #ifdef MODULE -static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; +static char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; #else -static const char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; +static char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; #endif module_param_array(pardev, charp, NULL, 0); MODULE_PARM_DESC(pardev, "pardev: where to search for\n" diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c index a22f765e968a..3bb99e93febe 100644 --- a/drivers/media/video/wm8739.c +++ b/drivers/media/video/wm8739.c @@ -291,15 +291,4 @@ static struct i2c_driver wm8739_driver = { .id_table = wm8739_id, }; -static __init int init_wm8739(void) -{ - return i2c_add_driver(&wm8739_driver); -} - -static __exit void exit_wm8739(void) -{ - i2c_del_driver(&wm8739_driver); -} - -module_init(init_wm8739); -module_exit(exit_wm8739); +module_i2c_driver(wm8739_driver); diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index 9cedb1e69b58..bee77ea9f49e 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -339,15 +339,4 @@ static struct i2c_driver wm8775_driver = { .id_table = wm8775_id, }; -static __init int init_wm8775(void) -{ - return i2c_add_driver(&wm8775_driver); -} - -static __exit void exit_wm8775(void) -{ - i2c_del_driver(&wm8775_driver); -} - -module_init(init_wm8775); -module_exit(exit_wm8775); +module_i2c_driver(wm8775_driver); diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 7e5caa39ed3f..4f4b7d6281a7 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -6,7 +6,7 @@ menuconfig STAGING_MEDIA don't have the "normal" Linux kernel quality level. Most of them don't follow properly the V4L, DVB and/or RC API's, so, they won't likely work fine with the existing applications. - That also means that, one fixed, their API's will change to match + That also means that, once fixed, their API's will change to match the existing ones. If you wish to work on these drivers, to help improve them, or diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c index aae0505a36c4..ea4f992de235 100644 --- a/drivers/staging/media/as102/as102_drv.c +++ b/drivers/staging/media/as102/as102_drv.c @@ -27,7 +27,7 @@ #include <linux/uaccess.h> #include <linux/usb.h> -/* header file for Usb device driver*/ +/* header file for usb device driver*/ #include "as102_drv.h" #include "as102_fw.h" #include "dvbdev.h" diff --git a/drivers/staging/media/as102/as102_drv.h b/drivers/staging/media/as102/as102_drv.h index 957f0ed0d81a..b0e5a23bd532 100644 --- a/drivers/staging/media/as102/as102_drv.h +++ b/drivers/staging/media/as102/as102_drv.h @@ -76,7 +76,7 @@ struct as102_dev_t { struct as10x_bus_adapter_t bus_adap; struct list_head device_entry; struct kref kref; - unsigned long minor; + uint8_t elna_cfg; struct dvb_adapter dvb_adap; struct dvb_frontend dvb_fe; diff --git a/drivers/staging/media/as102/as102_fe.c b/drivers/staging/media/as102/as102_fe.c index bdc5a38cddf7..5917657b9d0f 100644 --- a/drivers/staging/media/as102/as102_fe.c +++ b/drivers/staging/media/as102/as102_fe.c @@ -265,7 +265,7 @@ static int as102_fe_ts_bus_ctrl(struct dvb_frontend *fe, int acquire) if (acquire) { if (elna_enable) - as10x_cmd_set_context(&dev->bus_adap, 1010, 0xC0); + as10x_cmd_set_context(&dev->bus_adap, CONTEXT_LNA, dev->elna_cfg); ret = as10x_cmd_turn_on(&dev->bus_adap); } else { @@ -337,7 +337,7 @@ int as102_dvb_register_fe(struct as102_dev_t *as102_dev, strncpy(dvb_fe->ops.info.name, as102_dev->name, sizeof(dvb_fe->ops.info.name)); - /* register dbvb frontend */ + /* register dvb frontend */ errno = dvb_register_frontend(dvb_adap, dvb_fe); if (errno == 0) dvb_fe->tuner_priv = as102_dev; @@ -349,7 +349,7 @@ static void as10x_fe_copy_tps_parameters(struct dtv_frontend_properties *fe_tps, struct as10x_tps *as10x_tps) { - /* extract consteallation */ + /* extract constellation */ switch (as10x_tps->modulation) { case CONST_QPSK: fe_tps->modulation = QPSK; diff --git a/drivers/staging/media/as102/as102_fw.h b/drivers/staging/media/as102/as102_fw.h index bd21f0554392..4bfc6849d95a 100644 --- a/drivers/staging/media/as102/as102_fw.h +++ b/drivers/staging/media/as102/as102_fw.h @@ -29,7 +29,7 @@ struct as10x_fw_pkt_t { union { unsigned char request[2]; unsigned char length[2]; - } u; + } __packed u; struct as10x_raw_fw_pkt raw; } __packed; diff --git a/drivers/staging/media/as102/as102_usb_drv.c b/drivers/staging/media/as102/as102_usb_drv.c index d775be0173ea..0f6bfe7eccba 100644 --- a/drivers/staging/media/as102/as102_usb_drv.c +++ b/drivers/staging/media/as102/as102_usb_drv.c @@ -57,6 +57,17 @@ static const char * const as102_device_names[] = { NULL /* Terminating entry */ }; +/* eLNA configuration: devices built on the reference design work best + with 0xA0, while custom designs seem to require 0xC0 */ +static uint8_t const as102_elna_cfg[] = { + 0xA0, + 0xC0, + 0xC0, + 0xA0, + 0xA0, + 0x00 /* Terminating entry */ +}; + struct usb_driver as102_usb_driver = { .name = DRIVER_FULL_NAME, .probe = as102_usb_probe, @@ -270,6 +281,8 @@ static int as102_alloc_usb_stream_buffer(struct as102_dev_t *dev) } urb->transfer_buffer = dev->stream + (i * AS102_USB_BUF_SIZE); + urb->transfer_dma = dev->dma_addr + (i * AS102_USB_BUF_SIZE); + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; urb->transfer_buffer_length = AS102_USB_BUF_SIZE; dev->stream_urb[i] = urb; @@ -369,8 +382,10 @@ static int as102_usb_probe(struct usb_interface *intf, /* Assign the user-friendly device name */ for (i = 0; i < (sizeof(as102_usb_id_table) / sizeof(struct usb_device_id)); i++) { - if (id == &as102_usb_id_table[i]) + if (id == &as102_usb_id_table[i]) { as102_dev->name = as102_device_names[i]; + as102_dev->elna_cfg = as102_elna_cfg[i]; + } } if (as102_dev->name == NULL) diff --git a/drivers/staging/media/as102/as10x_cmd.h b/drivers/staging/media/as102/as10x_cmd.h index 4ea249e7adab..e21ec6c702a9 100644 --- a/drivers/staging/media/as102/as10x_cmd.h +++ b/drivers/staging/media/as102/as10x_cmd.h @@ -99,14 +99,14 @@ union as10x_turn_on { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_turn_off { @@ -114,14 +114,14 @@ union as10x_turn_off { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* error */ uint8_t err; - } rsp; + } __packed rsp; } __packed; union as10x_set_tune { @@ -131,14 +131,14 @@ union as10x_set_tune { uint16_t proc_id; /* tune params */ struct as10x_tune_args args; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* response error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_get_tune_status { @@ -146,7 +146,7 @@ union as10x_get_tune_status { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -155,7 +155,7 @@ union as10x_get_tune_status { uint8_t error; /* tune status */ struct as10x_tune_status sts; - } rsp; + } __packed rsp; } __packed; union as10x_get_tps { @@ -163,7 +163,7 @@ union as10x_get_tps { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -172,7 +172,7 @@ union as10x_get_tps { uint8_t error; /* tps details */ struct as10x_tps tps; - } rsp; + } __packed rsp; } __packed; union as10x_common { @@ -180,14 +180,14 @@ union as10x_common { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* response error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_add_pid_filter { @@ -201,7 +201,7 @@ union as10x_add_pid_filter { uint8_t stream_type; /* PID index in filter table */ uint8_t idx; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -210,7 +210,7 @@ union as10x_add_pid_filter { uint8_t error; /* Filter id */ uint8_t filter_id; - } rsp; + } __packed rsp; } __packed; union as10x_del_pid_filter { @@ -220,14 +220,14 @@ union as10x_del_pid_filter { uint16_t proc_id; /* PID to remove */ uint16_t pid; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* response error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_start_streaming { @@ -235,14 +235,14 @@ union as10x_start_streaming { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_stop_streaming { @@ -250,14 +250,14 @@ union as10x_stop_streaming { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_get_demod_stats { @@ -265,7 +265,7 @@ union as10x_get_demod_stats { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -274,7 +274,7 @@ union as10x_get_demod_stats { uint8_t error; /* demod stats */ struct as10x_demod_stats stats; - } rsp; + } __packed rsp; } __packed; union as10x_get_impulse_resp { @@ -282,7 +282,7 @@ union as10x_get_impulse_resp { struct { /* request identifier */ uint16_t proc_id; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -291,7 +291,7 @@ union as10x_get_impulse_resp { uint8_t error; /* impulse response ready */ uint8_t is_ready; - } rsp; + } __packed rsp; } __packed; union as10x_fw_context { @@ -305,7 +305,7 @@ union as10x_fw_context { uint16_t tag; /* context request type */ uint16_t type; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -316,7 +316,7 @@ union as10x_fw_context { uint16_t type; /* error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_set_register { @@ -328,14 +328,14 @@ union as10x_set_register { struct as10x_register_addr reg_addr; /* register content */ struct as10x_register_value reg_val; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; union as10x_get_register { @@ -345,7 +345,7 @@ union as10x_get_register { uint16_t proc_id; /* register description */ struct as10x_register_addr reg_addr; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -354,7 +354,7 @@ union as10x_get_register { uint8_t error; /* register content */ struct as10x_register_value reg_val; - } rsp; + } __packed rsp; } __packed; union as10x_cfg_change_mode { @@ -364,14 +364,14 @@ union as10x_cfg_change_mode { uint16_t proc_id; /* mode */ uint8_t mode; - } req; + } __packed req; /* response */ struct { /* response identifier */ uint16_t proc_id; /* error */ uint8_t error; - } rsp; + } __packed rsp; } __packed; struct as10x_cmd_header_t { @@ -394,7 +394,7 @@ union as10x_dump_memory { struct as10x_register_addr reg_addr; /* nb blocks to read */ uint16_t num_blocks; - } req; + } __packed req; /* response */ struct { /* response identifier */ @@ -408,8 +408,8 @@ union as10x_dump_memory { uint8_t data8[DUMP_BLOCK_SIZE]; uint16_t data16[DUMP_BLOCK_SIZE / sizeof(uint16_t)]; uint32_t data32[DUMP_BLOCK_SIZE / sizeof(uint32_t)]; - } u; - } rsp; + } __packed u; + } __packed rsp; } __packed; union as10x_dumplog_memory { @@ -418,7 +418,7 @@ union as10x_dumplog_memory { uint16_t proc_id; /* dump memory type request */ uint8_t dump_req; - } req; + } __packed req; struct { /* request identifier */ uint16_t proc_id; @@ -428,7 +428,7 @@ union as10x_dumplog_memory { uint8_t dump_rsp; /* dump data */ uint8_t data[DUMP_BLOCK_SIZE]; - } rsp; + } __packed rsp; } __packed; union as10x_raw_data { @@ -437,14 +437,14 @@ union as10x_raw_data { uint16_t proc_id; uint8_t data[64 - sizeof(struct as10x_cmd_header_t) - 2 /* proc_id */]; - } req; + } __packed req; /* response */ struct { uint16_t proc_id; uint8_t error; uint8_t data[64 - sizeof(struct as10x_cmd_header_t) - 2 /* proc_id */ - 1 /* rc */]; - } rsp; + } __packed rsp; } __packed; struct as10x_cmd_t { @@ -469,7 +469,7 @@ struct as10x_cmd_t { union as10x_dump_memory dump_memory; union as10x_dumplog_memory dumplog_memory; union as10x_raw_data raw_data; - } body; + } __packed body; } __packed; struct as10x_token_cmd_t { diff --git a/drivers/staging/media/as102/as10x_types.h b/drivers/staging/media/as102/as10x_types.h index fde8140ae88b..af26e057d9a2 100644 --- a/drivers/staging/media/as102/as10x_types.h +++ b/drivers/staging/media/as102/as10x_types.h @@ -181,7 +181,7 @@ struct as10x_register_value { uint8_t value8; /* 8 bit value */ uint16_t value16; /* 16 bit value */ uint32_t value32; /* 32 bit value */ - } u; + } __packed u; } __packed; struct as10x_register_addr { diff --git a/drivers/staging/media/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c index 3d439b790cc6..d0fe34afc2e5 100644 --- a/drivers/staging/media/easycap/easycap_main.c +++ b/drivers/staging/media/easycap/easycap_main.c @@ -2849,13 +2849,11 @@ static const struct v4l2_file_operations v4l2_fops = { .poll = easycap_poll, .mmap = easycap_mmap, }; -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ + /* - * WHEN THE EasyCAP IS PHYSICALLY PLUGGED IN, THIS FUNCTION IS CALLED THREE - * TIMES, ONCE FOR EACH OF THE THREE INTERFACES. BEWARE. + * When the device is plugged, this function is called three times, + * one for each interface. */ -/*---------------------------------------------------------------------------*/ static int easycap_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -2884,7 +2882,6 @@ static int easycap_usb_probe(struct usb_interface *intf, usbdev = interface_to_usbdev(intf); -/*---------------------------------------------------------------------------*/ alt = usb_altnum_to_altsetting(intf, 0); if (!alt) { SAY("ERROR: usb_host_interface not found\n"); @@ -2896,11 +2893,8 @@ static int easycap_usb_probe(struct usb_interface *intf, SAY("ERROR: intf_descriptor is NULL\n"); return -EFAULT; } -/*---------------------------------------------------------------------------*/ -/* - * GET PROPERTIES OF PROBED INTERFACE - */ -/*---------------------------------------------------------------------------*/ + + /* Get properties of probed interface */ bInterfaceNumber = interface->bInterfaceNumber; bInterfaceClass = interface->bInterfaceClass; bInterfaceSubClass = interface->bInterfaceSubClass; @@ -2912,28 +2906,23 @@ static int easycap_usb_probe(struct usb_interface *intf, (long int)(intf->cur_altsetting - intf->altsetting)); JOT(4, "intf[%i]: bInterfaceClass=0x%02X bInterfaceSubClass=0x%02X\n", bInterfaceNumber, bInterfaceClass, bInterfaceSubClass); -/*---------------------------------------------------------------------------*/ -/* - * A NEW struct easycap IS ALWAYS ALLOCATED WHEN INTERFACE 0 IS PROBED. - * IT IS NOT POSSIBLE HERE TO FREE ANY EXISTING struct easycap. THIS - * SHOULD HAVE BEEN DONE BY easycap_delete() WHEN THE EasyCAP WAS - * PHYSICALLY UNPLUGGED. - * - * THE POINTER peasycap TO THE struct easycap IS REMEMBERED WHEN - * INTERFACES 1 AND 2 ARE PROBED. -*/ -/*---------------------------------------------------------------------------*/ + + /* + * A new struct easycap is always allocated when interface 0 is probed. + * It is not possible here to free any existing struct easycap. + * This should have been done by easycap_delete() when the device was + * physically unplugged. + * The allocated struct easycap is saved for later usage when + * interfaces 1 and 2 are probed. + */ if (0 == bInterfaceNumber) { peasycap = kzalloc(sizeof(struct easycap), GFP_KERNEL); if (!peasycap) { SAY("ERROR: Could not allocate peasycap\n"); return -ENOMEM; } -/*---------------------------------------------------------------------------*/ -/* - * PERFORM URGENT INTIALIZATIONS ... -*/ -/*---------------------------------------------------------------------------*/ + + /* Perform urgent initializations */ peasycap->minor = -1; kref_init(&peasycap->kref); JOM(8, "intf[%i]: after kref_init(..._video) " @@ -2976,11 +2965,7 @@ static int easycap_usb_probe(struct usb_interface *intf, peasycap->allocation_video_struct = sizeof(struct easycap); -/*---------------------------------------------------------------------------*/ -/* - * ... AND FURTHER INITIALIZE THE STRUCTURE -*/ -/*---------------------------------------------------------------------------*/ + /* and further initialize the structure */ peasycap->pusb_device = usbdev; peasycap->pusb_interface = intf; @@ -3002,11 +2987,7 @@ static int easycap_usb_probe(struct usb_interface *intf, peasycap->frame_buffer_many = FRAME_BUFFER_MANY; -/*---------------------------------------------------------------------------*/ -/* - * DYNAMICALLY FILL IN THE AVAILABLE FORMATS ... - */ -/*---------------------------------------------------------------------------*/ + /* Dynamically fill in the available formats */ rc = easycap_video_fillin_formats(); if (0 > rc) { SAM("ERROR: fillin_formats() rc = %i\n", rc); @@ -3014,10 +2995,8 @@ static int easycap_usb_probe(struct usb_interface *intf, } JOM(4, "%i formats available\n", rc); - /* ... AND POPULATE easycap.inputset[] */ - + /* Populate easycap.inputset[] */ inputset = peasycap->inputset; - fmtidx = peasycap->ntsc ? NTSC_M : PAL_BGHIN; m = 0; mask = 0; @@ -3030,7 +3009,6 @@ static int easycap_usb_probe(struct usb_interface *intf, mask = easycap_standard[i].mask; } } - if (1 != m) { SAM("ERROR: " "inputset->standard_offset unpopulated, %i=m\n", m); @@ -3089,14 +3067,13 @@ static int easycap_usb_probe(struct usb_interface *intf, JOM(4, "populated inputset[]\n"); JOM(4, "finished initialization\n"); } else { -/*---------------------------------------------------------------------------*/ -/* - * FIXME - * - * IDENTIFY THE APPROPRIATE POINTER peasycap FOR INTERFACES 1 AND 2. - * THE ADDRESS OF peasycap->pusb_device IS RELUCTANTLY USED FOR THIS PURPOSE. - */ -/*---------------------------------------------------------------------------*/ + + /* + * FIXME: Identify the appropriate pointer + * peasycap for interfaces 1 and 2. + * The address of peasycap->pusb_device + * is reluctantly used for this purpose. + */ for (ndong = 0; ndong < DONGLE_MANY; ndong++) { if (usbdev == easycapdc60_dongle[ndong].peasycap-> pusb_device) { @@ -3117,7 +3094,7 @@ static int easycap_usb_probe(struct usb_interface *intf, return -ENODEV; } } -/*---------------------------------------------------------------------------*/ + if ((USB_CLASS_VIDEO == bInterfaceClass) || (USB_CLASS_VENDOR_SPEC == bInterfaceClass)) { if (-1 == peasycap->video_interface) { @@ -3149,14 +3126,12 @@ static int easycap_usb_probe(struct usb_interface *intf, } } } -/*---------------------------------------------------------------------------*/ -/* - * INVESTIGATE ALL ALTSETTINGS. - * DONE IN DETAIL BECAUSE USB DEVICE 05e1:0408 HAS DISPARATE INCARNATIONS. - */ -/*---------------------------------------------------------------------------*/ - isokalt = 0; + /* + * Investigate all altsettings. This is done in detail + * because USB device 05e1:0408 has disparate incarnations. + */ + isokalt = 0; for (i = 0; i < intf->num_altsetting; i++) { alt = usb_altnum_to_altsetting(intf, i); if (!alt) { @@ -3172,7 +3147,6 @@ static int easycap_usb_probe(struct usb_interface *intf, if (0 == interface->bNumEndpoints) JOM(4, "intf[%i]alt[%i] has no endpoints\n", bInterfaceNumber, i); -/*---------------------------------------------------------------------------*/ for (j = 0; j < interface->bNumEndpoints; j++) { ep = &alt->endpoint[j].desc; if (!ep) { @@ -3312,19 +3286,12 @@ static int easycap_usb_probe(struct usb_interface *intf, } } } -/*---------------------------------------------------------------------------*/ -/* - * PERFORM INITIALIZATION OF THE PROBED INTERFACE - */ -/*---------------------------------------------------------------------------*/ + + /* Perform initialization of the probed interface */ JOM(4, "initialization begins for interface %i\n", interface->bInterfaceNumber); switch (bInterfaceNumber) { -/*---------------------------------------------------------------------------*/ -/* - * INTERFACE 0 IS THE VIDEO INTERFACE - */ -/*---------------------------------------------------------------------------*/ + /* 0: Video interface */ case 0: { if (!peasycap) { SAM("MISTAKE: peasycap is NULL\n"); @@ -3337,11 +3304,8 @@ static int easycap_usb_probe(struct usb_interface *intf, peasycap->video_altsetting_on = okalt[isokalt - 1]; JOM(4, "%i=video_altsetting_on <====\n", peasycap->video_altsetting_on); -/*---------------------------------------------------------------------------*/ -/* - * DECIDE THE VIDEO STREAMING PARAMETERS - */ -/*---------------------------------------------------------------------------*/ + + /* Decide video streaming parameters */ peasycap->video_endpointnumber = okepn[isokalt - 1]; JOM(4, "%i=video_endpointnumber\n", peasycap->video_endpointnumber); maxpacketsize = okmps[isokalt - 1]; @@ -3373,7 +3337,6 @@ static int easycap_usb_probe(struct usb_interface *intf, SAM("MISTAKE: peasycap->video_isoc_buffer_size too big\n"); return -EFAULT; } -/*---------------------------------------------------------------------------*/ if (-1 == peasycap->video_interface) { SAM("MISTAKE: video_interface is unset\n"); return -EFAULT; @@ -3398,14 +3361,13 @@ static int easycap_usb_probe(struct usb_interface *intf, SAM("MISTAKE: video_isoc_buffer_size is unset\n"); return -EFAULT; } -/*---------------------------------------------------------------------------*/ -/* - * ALLOCATE MEMORY FOR VIDEO BUFFERS. LISTS MUST BE INITIALIZED FIRST. - */ -/*---------------------------------------------------------------------------*/ + + /* + * Allocate memory for video buffers. + * Lists must be initialized first. + */ INIT_LIST_HEAD(&(peasycap->urb_video_head)); peasycap->purb_video_head = &(peasycap->urb_video_head); -/*---------------------------------------------------------------------------*/ JOM(4, "allocating %i frame buffers of size %li\n", FRAME_BUFFER_MANY, (long int)FRAME_BUFFER_SIZE); JOM(4, ".... each scattered over %li pages\n", @@ -3436,7 +3398,6 @@ static int easycap_usb_probe(struct usb_interface *intf, peasycap->frame_read = 0; JOM(4, "allocation of frame buffers done: %i pages\n", k * m); -/*---------------------------------------------------------------------------*/ JOM(4, "allocating %i field buffers of size %li\n", FIELD_BUFFER_MANY, (long int)FIELD_BUFFER_SIZE); JOM(4, ".... each scattered over %li pages\n", @@ -3468,7 +3429,6 @@ static int easycap_usb_probe(struct usb_interface *intf, peasycap->field_read = 0; JOM(4, "allocation of field buffers done: %i pages\n", k * m); -/*---------------------------------------------------------------------------*/ JOM(4, "allocating %i isoc video buffers of size %i\n", VIDEO_ISOC_BUFFER_MANY, peasycap->video_isoc_buffer_size); @@ -3492,11 +3452,8 @@ static int easycap_usb_probe(struct usb_interface *intf, } JOM(4, "allocation of isoc video buffers done: %i pages\n", k * (0x01 << VIDEO_ISOC_ORDER)); -/*---------------------------------------------------------------------------*/ -/* - * ALLOCATE AND INITIALIZE MULTIPLE struct urb ... - */ -/*---------------------------------------------------------------------------*/ + + /* Allocate and initialize multiple struct usb */ JOM(4, "allocating %i struct urb.\n", VIDEO_ISOC_BUFFER_MANY); JOM(4, "using %i=peasycap->video_isoc_framesperdesc\n", peasycap->video_isoc_framesperdesc); @@ -3515,7 +3472,6 @@ static int easycap_usb_probe(struct usb_interface *intf, } peasycap->allocation_video_urb += 1; -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ pdata_urb = kzalloc(sizeof(struct data_urb), GFP_KERNEL); if (!pdata_urb) { SAM("ERROR: Could not allocate struct data_urb.\n"); @@ -3530,11 +3486,8 @@ static int easycap_usb_probe(struct usb_interface *intf, pdata_urb->length = 0; list_add_tail(&(pdata_urb->list_head), peasycap->purb_video_head); -/*---------------------------------------------------------------------------*/ -/* - * ... AND INITIALIZE THEM - */ -/*---------------------------------------------------------------------------*/ + + /* Initialize allocated urbs */ if (!k) { JOM(4, "initializing video urbs thus:\n"); JOM(4, " purb->interval = 1;\n"); @@ -3582,20 +3535,16 @@ static int easycap_usb_probe(struct usb_interface *intf, } } JOM(4, "allocation of %i struct urb done.\n", k); -/*--------------------------------------------------------------------------*/ -/* - * SAVE POINTER peasycap IN THIS INTERFACE. - */ -/*--------------------------------------------------------------------------*/ + + /* Save pointer peasycap in this interface */ usb_set_intfdata(intf, peasycap); -/*---------------------------------------------------------------------------*/ -/* - * IT IS ESSENTIAL TO INITIALIZE THE HARDWARE BEFORE, RATHER THAN AFTER, - * THE DEVICE IS REGISTERED, BECAUSE SOME VERSIONS OF THE videodev MODULE - * CALL easycap_open() IMMEDIATELY AFTER REGISTRATION, CAUSING A CLASH. - * BEWARE. -*/ -/*---------------------------------------------------------------------------*/ + + /* + * It is essential to initialize the hardware before, + * rather than after, the device is registered, + * because some udev rules triggers easycap_open() + * immediately after registration, causing a clash. + */ peasycap->ntsc = easycap_ntsc; JOM(8, "defaulting initially to %s\n", easycap_ntsc ? "NTSC" : "PAL"); @@ -3604,27 +3553,20 @@ static int easycap_usb_probe(struct usb_interface *intf, SAM("ERROR: reset() rc = %i\n", rc); return -EFAULT; } -/*--------------------------------------------------------------------------*/ -/* - * THE VIDEO DEVICE CAN BE REGISTERED NOW, AS IT IS READY. - */ -/*--------------------------------------------------------------------------*/ + + /* The video device can now be registered */ if (v4l2_device_register(&intf->dev, &peasycap->v4l2_device)) { SAM("v4l2_device_register() failed\n"); return -ENODEV; } JOM(4, "registered device instance: %s\n", peasycap->v4l2_device.name); -/*---------------------------------------------------------------------------*/ -/* - * FIXME - * - * - * THIS IS BELIEVED TO BE HARMLESS, BUT MAY WELL BE UNNECESSARY OR WRONG: -*/ -/*---------------------------------------------------------------------------*/ + + /* + * FIXME: This is believed to be harmless, + * but may well be unnecessary or wrong. + */ peasycap->video_device.v4l2_dev = NULL; -/*---------------------------------------------------------------------------*/ strcpy(&peasycap->video_device.name[0], "easycapdc60"); @@ -3648,28 +3590,19 @@ static int easycap_usb_probe(struct usb_interface *intf, break; } -/*--------------------------------------------------------------------------*/ -/* - * INTERFACE 1 IS THE AUDIO CONTROL INTERFACE - * INTERFACE 2 IS THE AUDIO STREAMING INTERFACE - */ -/*--------------------------------------------------------------------------*/ + /* 1: Audio control */ case 1: { if (!peasycap) { SAM("MISTAKE: peasycap is NULL\n"); return -EFAULT; } -/*--------------------------------------------------------------------------*/ -/* - * SAVE POINTER peasycap IN INTERFACE 1 - */ -/*--------------------------------------------------------------------------*/ + /* Save pointer peasycap in this interface */ usb_set_intfdata(intf, peasycap); JOM(4, "no initialization required for interface %i\n", interface->bInterfaceNumber); break; } -/*--------------------------------------------------------------------------*/ + /* 2: Audio streaming */ case 2: { if (!peasycap) { SAM("MISTAKE: peasycap is NULL\n"); @@ -3769,15 +3702,14 @@ static int easycap_usb_probe(struct usb_interface *intf, SAM("MISTAKE: audio_isoc_buffer_size is unset\n"); return -EFAULT; } -/*---------------------------------------------------------------------------*/ -/* - * ALLOCATE MEMORY FOR AUDIO BUFFERS. LISTS MUST BE INITIALIZED FIRST. - */ -/*---------------------------------------------------------------------------*/ + + /* + * Allocate memory for audio buffers. + * Lists must be initialized first. + */ INIT_LIST_HEAD(&(peasycap->urb_audio_head)); peasycap->purb_audio_head = &(peasycap->urb_audio_head); -/*---------------------------------------------------------------------------*/ JOM(4, "allocating %i isoc audio buffers of size %i\n", AUDIO_ISOC_BUFFER_MANY, peasycap->audio_isoc_buffer_size); @@ -3800,11 +3732,8 @@ static int easycap_usb_probe(struct usb_interface *intf, peasycap->audio_isoc_buffer[k].kount = k; } JOM(4, "allocation of isoc audio buffers done.\n"); -/*---------------------------------------------------------------------------*/ -/* - * ALLOCATE AND INITIALIZE MULTIPLE struct urb ... - */ -/*---------------------------------------------------------------------------*/ + + /* Allocate and initialize urbs */ JOM(4, "allocating %i struct urb.\n", AUDIO_ISOC_BUFFER_MANY); JOM(4, "using %i=peasycap->audio_isoc_framesperdesc\n", peasycap->audio_isoc_framesperdesc); @@ -3822,7 +3751,6 @@ static int easycap_usb_probe(struct usb_interface *intf, return -ENOMEM; } peasycap->allocation_audio_urb += 1 ; -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ pdata_urb = kzalloc(sizeof(struct data_urb), GFP_KERNEL); if (!pdata_urb) { usb_free_urb(purb); @@ -3837,11 +3765,7 @@ static int easycap_usb_probe(struct usb_interface *intf, pdata_urb->length = 0; list_add_tail(&(pdata_urb->list_head), peasycap->purb_audio_head); -/*---------------------------------------------------------------------------*/ -/* - * ... AND INITIALIZE THEM - */ -/*---------------------------------------------------------------------------*/ + if (!k) { JOM(4, "initializing audio urbs thus:\n"); JOM(4, " purb->interval = 1;\n"); @@ -3889,17 +3813,11 @@ static int easycap_usb_probe(struct usb_interface *intf, } } JOM(4, "allocation of %i struct urb done.\n", k); -/*---------------------------------------------------------------------------*/ -/* - * SAVE POINTER peasycap IN THIS INTERFACE. - */ -/*---------------------------------------------------------------------------*/ + + /* Save pointer peasycap in this interface */ usb_set_intfdata(intf, peasycap); -/*---------------------------------------------------------------------------*/ -/* - * THE AUDIO DEVICE CAN BE REGISTERED NOW, AS IT IS READY. - */ -/*---------------------------------------------------------------------------*/ + + /* The audio device can now be registered */ JOM(4, "initializing ALSA card\n"); rc = easycap_alsa_probe(peasycap); @@ -3915,11 +3833,7 @@ static int easycap_usb_probe(struct usb_interface *intf, peasycap->registered_audio++; break; } -/*---------------------------------------------------------------------------*/ -/* - * INTERFACES OTHER THAN 0, 1 AND 2 ARE UNEXPECTED - */ -/*---------------------------------------------------------------------------*/ + /* Interfaces other than 0,1,2 are unexpected */ default: JOM(4, "ERROR: unexpected interface %i\n", bInterfaceNumber); return -EINVAL; diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c index 2b27d8da70a2..f91658670e34 100644 --- a/drivers/staging/media/go7007/go7007-v4l2.c +++ b/drivers/staging/media/go7007/go7007-v4l2.c @@ -1050,15 +1050,15 @@ static int vidioc_s_parm(struct file *filp, void *priv, return 0; } -/* VIDIOC_ENUMSTD on go7007 were used for enumberating the supported fps and +/* VIDIOC_ENUMSTD on go7007 were used for enumerating the supported fps and its resolution, when the device is not connected to TV. - This were an API abuse, probably used by the lack of specific IOCTL's to - enumberate it, by the time the driver were written. + This is were an API abuse, probably used by the lack of specific IOCTL's to + enumerate it, by the time the driver was written. However, since kernel 2.6.19, two new ioctls (VIDIOC_ENUM_FRAMEINTERVALS and VIDIOC_ENUM_FRAMESIZES) were added for this purpose. - The two functions bellow implements the newer ioctls + The two functions below implement the newer ioctls */ static int vidioc_enum_framesizes(struct file *filp, void *priv, struct v4l2_frmsizeenum *fsize) diff --git a/drivers/staging/media/go7007/s2250-board.c b/drivers/staging/media/go7007/s2250-board.c index e7736a915530..014d38410c99 100644 --- a/drivers/staging/media/go7007/s2250-board.c +++ b/drivers/staging/media/go7007/s2250-board.c @@ -192,6 +192,7 @@ static int write_reg_fp(struct i2c_client *client, u16 addr, u16 val) { struct go7007 *go = i2c_get_adapdata(client->adapter); struct go7007_usb *usb; + int rc; u8 *buf; struct s2250 *dec = i2c_get_clientdata(client); @@ -216,12 +217,13 @@ static int write_reg_fp(struct i2c_client *client, u16 addr, u16 val) kfree(buf); return -EINTR; } - if (go7007_usb_vendor_request(go, 0x57, addr, val, buf, 16, 1) < 0) { + rc = go7007_usb_vendor_request(go, 0x57, addr, val, buf, 16, 1); + mutex_unlock(&usb->i2c_lock); + if (rc < 0) { kfree(buf); - return -EFAULT; + return rc; } - mutex_unlock(&usb->i2c_lock); if (buf[0] == 0) { unsigned int subaddr, val_read; @@ -254,6 +256,7 @@ static int read_reg_fp(struct i2c_client *client, u16 addr, u16 *val) { struct go7007 *go = i2c_get_adapdata(client->adapter); struct go7007_usb *usb; + int rc; u8 *buf; if (go == NULL) @@ -276,11 +279,12 @@ static int read_reg_fp(struct i2c_client *client, u16 addr, u16 *val) kfree(buf); return -EINTR; } - if (go7007_usb_vendor_request(go, 0x58, addr, 0, buf, 16, 1) < 0) { + rc = go7007_usb_vendor_request(go, 0x58, addr, 0, buf, 16, 1); + mutex_unlock(&usb->i2c_lock); + if (rc < 0) { kfree(buf); - return -EFAULT; + return rc; } - mutex_unlock(&usb->i2c_lock); *val = (buf[0] << 8) | buf[1]; kfree(buf); diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c index 8dd8897ad860..97352cf6bd98 100644 --- a/drivers/staging/media/lirc/lirc_serial.c +++ b/drivers/staging/media/lirc/lirc_serial.c @@ -1282,7 +1282,7 @@ MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O" /* * some architectures (e.g. intel xscale) align the 8bit serial registers * on 32bit word boundaries. - * See linux-kernel/serial/8250.c serial_in()/out() + * See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out() */ module_param(ioshift, int, S_IRUGO); MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)"); diff --git a/drivers/staging/media/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig index 03dcac4ea4d0..63352de5eabf 100644 --- a/drivers/staging/media/solo6x10/Kconfig +++ b/drivers/staging/media/solo6x10/Kconfig @@ -5,4 +5,4 @@ config SOLO6X10 select SND_PCM ---help--- This driver supports the Softlogic based MPEG-4 and h.264 codec - codec cards. + cards. diff --git a/drivers/staging/media/solo6x10/core.c b/drivers/staging/media/solo6x10/core.c index f974f6412ad7..d2fd842e37cf 100644 --- a/drivers/staging/media/solo6x10/core.c +++ b/drivers/staging/media/solo6x10/core.c @@ -195,28 +195,28 @@ static int __devinit solo_pci_probe(struct pci_dev *pdev, SOLO6010_SYS_CFG_OUTDIV(3); solo_reg_write(solo_dev, SOLO_SYS_CFG, reg); - if (solo_dev->flags & FLAGS_6110) { - u32 sys_clock_MHz = SOLO_CLOCK_MHZ; - u32 pll_DIVQ; - u32 pll_DIVF; - - if (sys_clock_MHz < 125) { - pll_DIVQ = 3; - pll_DIVF = (sys_clock_MHz * 4) / 3; - } else { - pll_DIVQ = 2; - pll_DIVF = (sys_clock_MHz * 2) / 3; - } - - solo_reg_write(solo_dev, SOLO6110_PLL_CONFIG, + if (solo_dev->flags & FLAGS_6110) { + u32 sys_clock_MHz = SOLO_CLOCK_MHZ; + u32 pll_DIVQ; + u32 pll_DIVF; + + if (sys_clock_MHz < 125) { + pll_DIVQ = 3; + pll_DIVF = (sys_clock_MHz * 4) / 3; + } else { + pll_DIVQ = 2; + pll_DIVF = (sys_clock_MHz * 2) / 3; + } + + solo_reg_write(solo_dev, SOLO6110_PLL_CONFIG, SOLO6110_PLL_RANGE_5_10MHZ | SOLO6110_PLL_DIVR(9) | SOLO6110_PLL_DIVQ_EXP(pll_DIVQ) | SOLO6110_PLL_DIVF(pll_DIVF) | SOLO6110_PLL_FSEN); - mdelay(1); // PLL Locking time (1ms) + mdelay(1); /* PLL Locking time (1ms) */ solo_reg_write(solo_dev, SOLO_DMA_CTRL1, 3 << 8); /* ? */ - } else + } else solo_reg_write(solo_dev, SOLO_DMA_CTRL1, 1 << 8); /* ? */ solo_reg_write(solo_dev, SOLO_TIMER_CLOCK_NUM, SOLO_CLOCK_MHZ - 1); diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h index 062d20f74322..42bf725751af 100644 --- a/include/linux/ivtv.h +++ b/include/linux/ivtv.h @@ -58,7 +58,11 @@ struct ivtv_dma_frame { __u32 src_height; }; -#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) +#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) + +/* Select the passthrough mode (if the argument is non-zero). In the passthrough + mode the output of the encoder is passed immediately into the decoder. */ +#define IVTV_IOC_PASSTHROUGH_MODE _IOW ('V', BASE_VIDIOC_PRIVATE+1, int) /* Deprecated defines: applications should use the defines from videodev2.h */ #define IVTV_SLICED_TYPE_TELETEXT_B V4L2_MPEG_VBI_IVTV_TELETEXT_B diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5e11f8a1f867..c9c9a4680cc5 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -235,16 +235,25 @@ struct v4l2_fract { __u32 denominator; }; -/* - * D R I V E R C A P A B I L I T I E S - */ +/** + * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP + * + * @driver: name of the driver module (e.g. "bttv") + * @card: name of the card (e.g. "Hauppauge WinTV") + * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) ) + * @version: KERNEL_VERSION + * @capabilities: capabilities of the physical device as a whole + * @device_caps: capabilities accessed via this particular device (node) + * @reserved: reserved fields for future extensions + */ struct v4l2_capability { - __u8 driver[16]; /* i.e. "bttv" */ - __u8 card[32]; /* i.e. "Hauppauge WinTV" */ - __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */ - __u32 version; /* should use KERNEL_VERSION() */ - __u32 capabilities; /* Device capabilities */ - __u32 reserved[4]; + __u8 driver[16]; + __u8 card[32]; + __u8 bus_info[32]; + __u32 version; + __u32 capabilities; + __u32 device_caps; + __u32 reserved[3]; }; /* Values for 'capabilities' field */ @@ -274,6 +283,8 @@ struct v4l2_capability { #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ +#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ + /* * V I D E O I M A G E F O R M A T */ @@ -751,20 +762,20 @@ struct v4l2_crop { /* Selection targets */ -/* current cropping area */ -#define V4L2_SEL_TGT_CROP_ACTIVE 0 -/* default cropping area */ -#define V4L2_SEL_TGT_CROP_DEFAULT 1 -/* cropping bounds */ -#define V4L2_SEL_TGT_CROP_BOUNDS 2 -/* current composing area */ -#define V4L2_SEL_TGT_COMPOSE_ACTIVE 256 -/* default composing area */ -#define V4L2_SEL_TGT_COMPOSE_DEFAULT 257 -/* composing bounds */ -#define V4L2_SEL_TGT_COMPOSE_BOUNDS 258 -/* current composing area plus all padding pixels */ -#define V4L2_SEL_TGT_COMPOSE_PADDED 259 +/* Current cropping area */ +#define V4L2_SEL_TGT_CROP_ACTIVE 0x0000 +/* Default cropping area */ +#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001 +/* Cropping bounds */ +#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002 +/* Current composing area */ +#define V4L2_SEL_TGT_COMPOSE_ACTIVE 0x0100 +/* Default composing area */ +#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101 +/* Composing bounds */ +#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102 +/* Current composing area plus all padding pixels */ +#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 /** * struct v4l2_selection - selection info @@ -774,7 +785,7 @@ struct v4l2_crop { * @r: coordinates of selection window * @reserved: for future use, rounds structure size to 64 bytes, set to zero * - * Hardware may use multiple helper window to process a video stream. + * Hardware may use multiple helper windows to process a video stream. * The structure is used to exchange this selection areas between * an application and a driver. */ @@ -1125,6 +1136,7 @@ struct v4l2_ext_controls { #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ #define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ #define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ +#define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -1396,6 +1408,16 @@ enum v4l2_mpeg_audio_ac3_bitrate { V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17, V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, }; +#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_MPEG_BASE+112) +enum v4l2_mpeg_audio_dec_playback { + V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO = 0, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO = 1, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT = 2, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT = 3, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5, +}; +#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113) /* MPEG video controls specific to multiplexed streams */ #define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) @@ -1446,6 +1468,9 @@ enum v4l2_mpeg_video_multi_slice_mode { V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2, }; #define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) +#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) +#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) + #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) #define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) @@ -1734,6 +1759,29 @@ enum v4l2_flash_strobe_source { #define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) #define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) +/* JPEG-class control IDs defined by V4L2 */ +#define V4L2_CID_JPEG_CLASS_BASE (V4L2_CTRL_CLASS_JPEG | 0x900) +#define V4L2_CID_JPEG_CLASS (V4L2_CTRL_CLASS_JPEG | 1) + +#define V4L2_CID_JPEG_CHROMA_SUBSAMPLING (V4L2_CID_JPEG_CLASS_BASE + 1) +enum v4l2_jpeg_chroma_subsampling { + V4L2_JPEG_CHROMA_SUBSAMPLING_444 = 0, + V4L2_JPEG_CHROMA_SUBSAMPLING_422 = 1, + V4L2_JPEG_CHROMA_SUBSAMPLING_420 = 2, + V4L2_JPEG_CHROMA_SUBSAMPLING_411 = 3, + V4L2_JPEG_CHROMA_SUBSAMPLING_410 = 4, + V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY = 5, +}; +#define V4L2_CID_JPEG_RESTART_INTERVAL (V4L2_CID_JPEG_CLASS_BASE + 2) +#define V4L2_CID_JPEG_COMPRESSION_QUALITY (V4L2_CID_JPEG_CLASS_BASE + 3) + +#define V4L2_CID_JPEG_ACTIVE_MARKER (V4L2_CID_JPEG_CLASS_BASE + 4) +#define V4L2_JPEG_ACTIVE_MARKER_APP0 (1 << 0) +#define V4L2_JPEG_ACTIVE_MARKER_APP1 (1 << 1) +#define V4L2_JPEG_ACTIVE_MARKER_COM (1 << 16) +#define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) +#define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) + /* * T U N I N G */ @@ -1897,6 +1945,54 @@ struct v4l2_encoder_cmd { }; }; +/* Decoder commands */ +#define V4L2_DEC_CMD_START (0) +#define V4L2_DEC_CMD_STOP (1) +#define V4L2_DEC_CMD_PAUSE (2) +#define V4L2_DEC_CMD_RESUME (3) + +/* Flags for V4L2_DEC_CMD_START */ +#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0) + +/* Flags for V4L2_DEC_CMD_PAUSE */ +#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0) + +/* Flags for V4L2_DEC_CMD_STOP */ +#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0) +#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1) + +/* Play format requirements (returned by the driver): */ + +/* The decoder has no special format requirements */ +#define V4L2_DEC_START_FMT_NONE (0) +/* The decoder requires full GOPs */ +#define V4L2_DEC_START_FMT_GOP (1) + +/* The structure must be zeroed before use by the application + This ensures it can be extended safely in the future. */ +struct v4l2_decoder_cmd { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + /* 0 or 1000 specifies normal speed, + 1 specifies forward single stepping, + -1 specifies backward single stepping, + >1: playback at speed/1000 of the normal speed, + <-1: reverse playback at (-speed/1000) of the normal speed. */ + __s32 speed; + __u32 format; + } start; + + struct { + __u32 data[16]; + } raw; + }; +}; #endif @@ -2307,6 +2403,11 @@ struct v4l2_create_buffers { #define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) #define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) +/* Experimental, these two ioctls may change over the next couple of kernel + versions. */ +#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd) +#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/include/media/adv7183.h b/include/media/adv7183.h new file mode 100644 index 000000000000..c5c2d377c0a6 --- /dev/null +++ b/include/media/adv7183.h @@ -0,0 +1,47 @@ +/* + * adv7183.h - definition for adv7183 inputs and outputs + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ADV7183_H_ +#define _ADV7183_H_ + +/* ADV7183 HW inputs */ +#define ADV7183_COMPOSITE0 0 /* CVBS in on AIN1 */ +#define ADV7183_COMPOSITE1 1 /* CVBS in on AIN2 */ +#define ADV7183_COMPOSITE2 2 /* CVBS in on AIN3 */ +#define ADV7183_COMPOSITE3 3 /* CVBS in on AIN4 */ +#define ADV7183_COMPOSITE4 4 /* CVBS in on AIN5 */ +#define ADV7183_COMPOSITE5 5 /* CVBS in on AIN6 */ +#define ADV7183_COMPOSITE6 6 /* CVBS in on AIN7 */ +#define ADV7183_COMPOSITE7 7 /* CVBS in on AIN8 */ +#define ADV7183_COMPOSITE8 8 /* CVBS in on AIN9 */ +#define ADV7183_COMPOSITE9 9 /* CVBS in on AIN10 */ +#define ADV7183_COMPOSITE10 10 /* CVBS in on AIN11 */ + +#define ADV7183_SVIDEO0 11 /* Y on AIN1, C on AIN4 */ +#define ADV7183_SVIDEO1 12 /* Y on AIN2, C on AIN5 */ +#define ADV7183_SVIDEO2 13 /* Y on AIN3, C on AIN6 */ + +#define ADV7183_COMPONENT0 14 /* Y on AIN1, Pr on AIN4, Pb on AIN5 */ +#define ADV7183_COMPONENT1 15 /* Y on AIN2, Pr on AIN3, Pb on AIN6 */ + +/* ADV7183 HW outputs */ +#define ADV7183_8BIT_OUT 0 +#define ADV7183_16BIT_OUT 1 + +#endif diff --git a/include/media/blackfin/bfin_capture.h b/include/media/blackfin/bfin_capture.h new file mode 100644 index 000000000000..2038a8a3f8aa --- /dev/null +++ b/include/media/blackfin/bfin_capture.h @@ -0,0 +1,37 @@ +#ifndef _BFIN_CAPTURE_H_ +#define _BFIN_CAPTURE_H_ + +#include <linux/i2c.h> + +struct v4l2_input; +struct ppi_info; + +struct bcap_route { + u32 input; + u32 output; +}; + +struct bfin_capture_config { + /* card name */ + char *card_name; + /* inputs available at the sub device */ + struct v4l2_input *inputs; + /* number of inputs supported */ + int num_inputs; + /* routing information for each input */ + struct bcap_route *routes; + /* i2c bus adapter no */ + int i2c_adapter_id; + /* i2c subdevice board info */ + struct i2c_board_info board_info; + /* ppi board info */ + const struct ppi_info *ppi_info; + /* ppi control */ + unsigned long ppi_control; + /* ppi interrupt mask */ + u32 int_mask; + /* horizontal blanking clocks */ + int blank_clocks; +}; + +#endif diff --git a/include/media/blackfin/ppi.h b/include/media/blackfin/ppi.h new file mode 100644 index 000000000000..8f72f8a0b3d0 --- /dev/null +++ b/include/media/blackfin/ppi.h @@ -0,0 +1,74 @@ +/* + * Analog Devices PPI header file + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _PPI_H_ +#define _PPI_H_ + +#include <linux/interrupt.h> + +#ifdef EPPI_EN +#define PORT_EN EPPI_EN +#define DMA32 0 +#define PACK_EN PACKEN +#endif + +struct ppi_if; + +struct ppi_params { + int width; + int height; + int bpp; + unsigned long ppi_control; + u32 int_mask; + int blank_clocks; +}; + +struct ppi_ops { + int (*attach_irq)(struct ppi_if *ppi, irq_handler_t handler); + void (*detach_irq)(struct ppi_if *ppi); + int (*start)(struct ppi_if *ppi); + int (*stop)(struct ppi_if *ppi); + int (*set_params)(struct ppi_if *ppi, struct ppi_params *params); + void (*update_addr)(struct ppi_if *ppi, unsigned long addr); +}; + +enum ppi_type { + PPI_TYPE_PPI, + PPI_TYPE_EPPI, +}; + +struct ppi_info { + enum ppi_type type; + int dma_ch; + int irq_err; + void __iomem *base; + const unsigned short *pin_req; +}; + +struct ppi_if { + unsigned long ppi_control; + const struct ppi_ops *ops; + const struct ppi_info *info; + bool err_int; + void *priv; +}; + +struct ppi_if *ppi_create_instance(const struct ppi_info *info); +void ppi_delete_instance(struct ppi_if *ppi); +#endif diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h index 9929b05cff3a..bd8217c2577c 100644 --- a/include/media/davinci/vpif_types.h +++ b/include/media/davinci/vpif_types.h @@ -17,6 +17,8 @@ #ifndef _VPIF_TYPES_H #define _VPIF_TYPES_H +#include <linux/i2c.h> + #define VPIF_CAPTURE_MAX_CHANNELS 2 enum vpif_if_type { diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h new file mode 100644 index 000000000000..67797bf5d432 --- /dev/null +++ b/include/media/gpio-ir-recv.h @@ -0,0 +1,22 @@ +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __GPIO_IR_RECV_H__ +#define __GPIO_IR_RECV_H__ + +struct gpio_ir_recv_platform_data { + int gpio_nr; + bool active_low; +}; + +#endif /* __GPIO_IR_RECV_H__ */ + diff --git a/include/media/mt9m032.h b/include/media/mt9m032.h new file mode 100644 index 000000000000..c3a78114d7a6 --- /dev/null +++ b/include/media/mt9m032.h @@ -0,0 +1,36 @@ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund <gwlund@lundeng.com> + * Author: Martin Hostettler <martin@neutronstar.dyndns.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef MT9M032_H +#define MT9M032_H + +#define MT9M032_NAME "mt9m032" +#define MT9M032_I2C_ADDR (0xb8 >> 1) + +struct mt9m032_platform_data { + u32 ext_clock; + u32 pix_clock; + bool invert_pixclock; + +}; +#endif /* MT9M032_H */ diff --git a/include/media/rc-map.h b/include/media/rc-map.h index f688bde61228..8db6741c1256 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -102,8 +102,11 @@ void rc_map_init(void); #define RC_MAP_IMON_MCE "rc-imon-mce" #define RC_MAP_IMON_PAD "rc-imon-pad" #define RC_MAP_IODATA_BCTV7E "rc-iodata-bctv7e" +#define RC_MAP_IT913X_V1 "rc-it913x-v1" +#define RC_MAP_IT913X_V2 "rc-it913x-v2" #define RC_MAP_KAIOMY "rc-kaiomy" #define RC_MAP_KWORLD_315U "rc-kworld-315u" +#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u" #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" #define RC_MAP_LIRC "rc-lirc" diff --git a/include/media/s5p_hdmi.h b/include/media/s5p_hdmi.h new file mode 100644 index 000000000000..361a751f73af --- /dev/null +++ b/include/media/s5p_hdmi.h @@ -0,0 +1,35 @@ +/* + * Driver header for S5P HDMI chip. + * + * Copyright (c) 2011 Samsung Electronics, Co. Ltd + * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_HDMI_H +#define S5P_HDMI_H + +struct i2c_board_info; + +/** + * @hdmiphy_bus: controller id for HDMIPHY bus + * @hdmiphy_info: template for HDMIPHY I2C device + * @mhl_bus: controller id for MHL control bus + * @mhl_info: template for MHL I2C device + * + * NULL pointer for *_info fields indicates that + * the corresponding chip is not present + */ +struct s5p_hdmi_platform_data { + int hdmiphy_bus; + struct i2c_board_info *hdmiphy_info; + int mhl_bus; + struct i2c_board_info *mhl_info; +}; + +#endif /* S5P_HDMI_H */ + diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h index 48413b410f15..a90a765f18da 100644 --- a/include/media/sh_mobile_ceu.h +++ b/include/media/sh_mobile_ceu.h @@ -18,6 +18,8 @@ struct sh_mobile_ceu_companion { struct sh_mobile_ceu_info { unsigned long flags; + int max_width; + int max_height; struct sh_mobile_ceu_companion *csi2; }; diff --git a/include/media/sii9234.h b/include/media/sii9234.h new file mode 100644 index 000000000000..6a4a809fe9a3 --- /dev/null +++ b/include/media/sii9234.h @@ -0,0 +1,24 @@ +/* + * Driver header for SII9234 MHL converter chip. + * + * Copyright (c) 2011 Samsung Electronics, Co. Ltd + * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef SII9234_H +#define SII9234_H + +/** + * @gpio_n_reset: GPIO driving nRESET pin + */ + +struct sii9234_platform_data { + int gpio_n_reset; +}; + +#endif /* SII9234_H */ diff --git a/include/media/tuner.h b/include/media/tuner.h index 29e1920e7339..926aff9bdf65 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -136,6 +136,7 @@ #define TUNER_TENA_TNF_5337 86 #define TUNER_XC4000 87 /* Xceive Silicon Tuner */ +#define TUNER_XC5000C 88 /* Xceive Silicon Tuner */ /* tv card specific */ #define TDA9887_PRESENT (1<<0) diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 810a20928a21..7395c815939d 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -143,6 +143,9 @@ enum { /* module saa6588: just ident 6588 */ V4L2_IDENT_SAA6588 = 6588, + /* module vs6624: just ident 6624 */ + V4L2_IDENT_VS6624 = 6624, + /* module saa6752hs: reserved range 6750-6759 */ V4L2_IDENT_SAA6752HS = 6752, V4L2_IDENT_SAA6752HS_AC3 = 6753, @@ -162,6 +165,9 @@ enum { /* module adv7180: just ident 7180 */ V4L2_IDENT_ADV7180 = 7180, + /* module adv7183: just ident 7183 */ + V4L2_IDENT_ADV7183 = 7183, + /* module saa7185: just ident 7185 */ V4L2_IDENT_SAA7185 = 7185, diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index eeb3df637144..3dbd06638506 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -33,6 +33,7 @@ struct video_device; struct v4l2_subdev; struct v4l2_subscribed_event; struct v4l2_fh; +struct poll_table_struct; /** struct v4l2_ctrl_ops - The control operations that the driver has to provide. * @g_volatile_ctrl: Get a new value for this control. Generally only relevant @@ -492,6 +493,18 @@ void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl, void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl, struct v4l2_subscribed_event *sev); +/* Can be used as a vidioc_log_status function that just dumps all controls + associated with the filehandle. */ +int v4l2_ctrl_log_status(struct file *file, void *fh); + +/* Can be used as a vidioc_subscribe_event function that just subscribes + control events. */ +int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); + +/* Can be used as a poll function that just polls for control events. */ +unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait); + /* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc); int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm); diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index c7c40f1d2624..96d22215cc88 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -62,6 +62,9 @@ struct v4l2_file_operations { unsigned int (*poll) (struct file *, struct poll_table_struct *); long (*ioctl) (struct file *, unsigned int, unsigned long); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); +#ifdef CONFIG_COMPAT + long (*compat_ioctl32) (struct file *, unsigned int, unsigned long); +#endif unsigned long (*get_unmapped_area) (struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 3f5d60fc5df6..4df031af9949 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -211,6 +211,10 @@ struct v4l2_ioctl_ops { struct v4l2_encoder_cmd *a); int (*vidioc_try_encoder_cmd) (struct file *file, void *fh, struct v4l2_encoder_cmd *a); + int (*vidioc_decoder_cmd) (struct file *file, void *fh, + struct v4l2_decoder_cmd *a); + int (*vidioc_try_decoder_cmd) (struct file *file, void *fh, + struct v4l2_decoder_cmd *a); /* Stream type-dependent parameter ioctls */ int (*vidioc_g_parm) (struct file *file, void *fh, diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h index 726e94742a5c..ec3f910aa40b 100644 --- a/include/sound/tea575x-tuner.h +++ b/include/sound/tea575x-tuner.h @@ -25,6 +25,7 @@ #include <linux/videodev2.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-dev.h> +#include <media/v4l2-device.h> #define TEA575X_FMIF 10700 @@ -42,13 +43,16 @@ struct snd_tea575x_ops { }; struct snd_tea575x { + struct v4l2_device *v4l2_dev; struct video_device vd; /* video device */ + int radio_nr; /* radio_nr */ bool tea5759; /* 5759 chip is present */ + bool cannot_read_data; /* Device cannot read the data pin */ bool mute; /* Device is muted? */ bool stereo; /* receiving stereo */ bool tuned; /* tuned to a station */ unsigned int val; /* hw value */ - unsigned long freq; /* frequency */ + u32 freq; /* frequency */ struct mutex mutex; struct snd_tea575x_ops *ops; void *private_data; diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c index 6b68c8206805..a63faec5e7fd 100644 --- a/sound/i2c/other/tea575x-tuner.c +++ b/sound/i2c/other/tea575x-tuner.c @@ -25,21 +25,20 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/version.h> +#include <linux/sched.h> +#include <media/v4l2-device.h> #include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-event.h> #include <sound/tea575x-tuner.h> MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>"); MODULE_DESCRIPTION("Routines for control of TEA5757/5759 Philips AM/FM radio tuner chips"); MODULE_LICENSE("GPL"); -static int radio_nr = -1; -module_param(radio_nr, int, 0); - -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) -#define FREQ_LO (50UL * 16000) -#define FREQ_HI (150UL * 16000) +#define FREQ_LO (76U * 16000) +#define FREQ_HI (108U * 16000) /* * definitions @@ -90,7 +89,7 @@ static void snd_tea575x_write(struct snd_tea575x *tea, unsigned int val) tea->ops->set_pins(tea, 0); } -static unsigned int snd_tea575x_read(struct snd_tea575x *tea) +static u32 snd_tea575x_read(struct snd_tea575x *tea) { u16 l, rdata; u32 data = 0; @@ -121,11 +120,13 @@ static unsigned int snd_tea575x_read(struct snd_tea575x *tea) return data; } -static void snd_tea575x_get_freq(struct snd_tea575x *tea) +static u32 snd_tea575x_get_freq(struct snd_tea575x *tea) { - unsigned long freq; + u32 freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK; + + if (freq == 0) + return freq; - freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK; /* freq *= 12.5 */ freq *= 125; freq /= 10; @@ -135,14 +136,13 @@ static void snd_tea575x_get_freq(struct snd_tea575x *tea) else freq -= TEA575X_FMIF; - tea->freq = freq * 16; /* from kHz */ + return clamp(freq * 16, FREQ_LO, FREQ_HI); /* from kHz */ } static void snd_tea575x_set_freq(struct snd_tea575x *tea) { - unsigned long freq; + u32 freq = tea->freq; - freq = clamp(tea->freq, FREQ_LO, FREQ_HI); freq /= 16; /* to kHz */ /* crystal fixup */ if (tea->tea5759) @@ -167,12 +167,14 @@ static int vidioc_querycap(struct file *file, void *priv, { struct snd_tea575x *tea = video_drvdata(file); - strlcpy(v->driver, "tea575x-tuner", sizeof(v->driver)); + strlcpy(v->driver, tea->v4l2_dev->name, sizeof(v->driver)); strlcpy(v->card, tea->card, sizeof(v->card)); strlcat(v->card, tea->tea5759 ? " TEA5759" : " TEA5757", sizeof(v->card)); strlcpy(v->bus_info, tea->bus_info, sizeof(v->bus_info)); - v->version = RADIO_VERSION; - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + if (!tea->cannot_read_data) + v->device_caps |= V4L2_CAP_HW_FREQ_SEEK; + v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } @@ -191,18 +193,24 @@ static int vidioc_g_tuner(struct file *file, void *priv, v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; v->rangelow = FREQ_LO; v->rangehigh = FREQ_HI; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->audmode = tea->stereo ? V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO; + v->rxsubchans = tea->stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; + v->audmode = (tea->val & TEA575X_BIT_MONO) ? + V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO; v->signal = tea->tuned ? 0xffff : 0; - return 0; } static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - if (v->index > 0) + struct snd_tea575x *tea = video_drvdata(file); + + if (v->index) return -EINVAL; + tea->val &= ~TEA575X_BIT_MONO; + if (v->audmode == V4L2_TUNER_MODE_MONO) + tea->val |= TEA575X_BIT_MONO; + snd_tea575x_write(tea, tea->val); return 0; } @@ -214,7 +222,6 @@ static int vidioc_g_frequency(struct file *file, void *priv, if (f->tuner != 0) return -EINVAL; f->type = V4L2_TUNER_RADIO; - snd_tea575x_get_freq(tea); f->frequency = tea->freq; return 0; } @@ -227,33 +234,72 @@ static int vidioc_s_frequency(struct file *file, void *priv, if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) return -EINVAL; - if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) - return -EINVAL; - - tea->freq = f->frequency; - + tea->val &= ~TEA575X_BIT_SEARCH; + tea->freq = clamp(f->frequency, FREQ_LO, FREQ_HI); snd_tea575x_set_freq(tea); - return 0; } -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) +static int vidioc_s_hw_freq_seek(struct file *file, void *fh, + struct v4l2_hw_freq_seek *a) { - if (a->index > 1) - return -EINVAL; - - strcpy(a->name, "Radio"); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} + struct snd_tea575x *tea = video_drvdata(file); + unsigned long timeout; + int i; -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - if (a->index != 0) + if (tea->cannot_read_data) + return -ENOTTY; + if (a->tuner || a->wrap_around) return -EINVAL; - return 0; + + /* clear the frequency, HW will fill it in */ + tea->val &= ~TEA575X_BIT_FREQ_MASK; + tea->val |= TEA575X_BIT_SEARCH; + if (a->seek_upward) + tea->val |= TEA575X_BIT_UPDOWN; + else + tea->val &= ~TEA575X_BIT_UPDOWN; + snd_tea575x_write(tea, tea->val); + timeout = jiffies + msecs_to_jiffies(10000); + for (;;) { + if (time_after(jiffies, timeout)) + break; + if (schedule_timeout_interruptible(msecs_to_jiffies(10))) { + /* some signal arrived, stop search */ + tea->val &= ~TEA575X_BIT_SEARCH; + snd_tea575x_set_freq(tea); + return -ERESTARTSYS; + } + if (!(snd_tea575x_read(tea) & TEA575X_BIT_SEARCH)) { + u32 freq; + + /* Found a frequency, wait until it can be read */ + for (i = 0; i < 100; i++) { + msleep(10); + freq = snd_tea575x_get_freq(tea); + if (freq) /* available */ + break; + } + if (freq == 0) /* shouldn't happen */ + break; + /* + * if we moved by less than 50 kHz, or in the wrong + * direction, continue seeking + */ + if (abs(tea->freq - freq) < 16 * 50 || + (a->seek_upward && freq < tea->freq) || + (!a->seek_upward && freq > tea->freq)) { + snd_tea575x_write(tea, tea->val); + continue; + } + tea->freq = freq; + tea->val &= ~TEA575X_BIT_SEARCH; + return 0; + } + } + tea->val &= ~TEA575X_BIT_SEARCH; + snd_tea575x_set_freq(tea); + return -EAGAIN; } static int tea575x_s_ctrl(struct v4l2_ctrl *ctrl) @@ -273,23 +319,27 @@ static int tea575x_s_ctrl(struct v4l2_ctrl *ctrl) static const struct v4l2_file_operations tea575x_fops = { .owner = THIS_MODULE, .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, }; static const struct v4l2_ioctl_ops tea575x_ioctl_ops = { .vidioc_querycap = vidioc_querycap, .vidioc_g_tuner = vidioc_g_tuner, .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_s_hw_freq_seek = vidioc_s_hw_freq_seek, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; -static struct video_device tea575x_radio = { - .name = "tea575x-tuner", +static const struct video_device tea575x_radio = { .fops = &tea575x_fops, .ioctl_ops = &tea575x_ioctl_ops, - .release = video_device_release_empty, + .release = video_device_release_empty, }; static const struct v4l2_ctrl_ops tea575x_ctrl_ops = { @@ -303,27 +353,34 @@ int snd_tea575x_init(struct snd_tea575x *tea) { int retval; - tea->mute = 1; + tea->mute = true; - snd_tea575x_write(tea, 0x55AA); - if (snd_tea575x_read(tea) != 0x55AA) - return -ENODEV; + /* Not all devices can or know how to read the data back. + Such devices can set cannot_read_data to true. */ + if (!tea->cannot_read_data) { + snd_tea575x_write(tea, 0x55AA); + if (snd_tea575x_read(tea) != 0x55AA) + return -ENODEV; + } - tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_10_40; + tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_5_28; tea->freq = 90500 * 16; /* 90.5Mhz default */ snd_tea575x_set_freq(tea); tea->vd = tea575x_radio; video_set_drvdata(&tea->vd, tea); mutex_init(&tea->mutex); + strlcpy(tea->vd.name, tea->v4l2_dev->name, sizeof(tea->vd.name)); tea->vd.lock = &tea->mutex; + tea->vd.v4l2_dev = tea->v4l2_dev; + tea->vd.ctrl_handler = &tea->ctrl_handler; + set_bit(V4L2_FL_USE_FH_PRIO, &tea->vd.flags); v4l2_ctrl_handler_init(&tea->ctrl_handler, 1); - tea->vd.ctrl_handler = &tea->ctrl_handler; v4l2_ctrl_new_std(&tea->ctrl_handler, &tea575x_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); retval = tea->ctrl_handler.error; if (retval) { - printk(KERN_ERR "tea575x-tuner: can't initialize controls\n"); + v4l2_err(tea->v4l2_dev, "can't initialize controls\n"); v4l2_ctrl_handler_free(&tea->ctrl_handler); return retval; } @@ -338,9 +395,9 @@ int snd_tea575x_init(struct snd_tea575x *tea) v4l2_ctrl_handler_setup(&tea->ctrl_handler); - retval = video_register_device(&tea->vd, VFL_TYPE_RADIO, radio_nr); + retval = video_register_device(&tea->vd, VFL_TYPE_RADIO, tea->radio_nr); if (retval) { - printk(KERN_ERR "tea575x-tuner: can't register video device!\n"); + v4l2_err(tea->v4l2_dev, "can't register video device!\n"); v4l2_ctrl_handler_free(&tea->ctrl_handler); return retval; } diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index cb557c603a80..a8faae1c85e4 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -142,6 +142,7 @@ static int enable_mpu[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2}; #ifdef SUPPORT_JOYSTICK static bool joystick[SNDRV_CARDS]; #endif +static int radio_nr[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = -1}; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard."); @@ -165,6 +166,9 @@ MODULE_PARM_DESC(enable_mpu, "Enable MPU401. (0 = off, 1 = on, 2 = auto)"); module_param_array(joystick, bool, NULL, 0444); MODULE_PARM_DESC(joystick, "Enable joystick."); #endif +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + #define NR_APUS 64 @@ -558,6 +562,7 @@ struct es1968 { struct work_struct hwvol_work; #ifdef CONFIG_SND_ES1968_RADIO + struct v4l2_device v4l2_dev; struct snd_tea575x tea; #endif }; @@ -2613,6 +2618,7 @@ static int snd_es1968_free(struct es1968 *chip) #ifdef CONFIG_SND_ES1968_RADIO snd_tea575x_exit(&chip->tea); + v4l2_device_unregister(&chip->v4l2_dev); #endif if (chip->irq >= 0) @@ -2655,6 +2661,7 @@ static int __devinit snd_es1968_create(struct snd_card *card, int capt_streams, int chip_type, int do_pm, + int radio_nr, struct es1968 **chip_ret) { static struct snd_device_ops ops = { @@ -2751,7 +2758,14 @@ static int __devinit snd_es1968_create(struct snd_card *card, snd_card_set_dev(card, &pci->dev); #ifdef CONFIG_SND_ES1968_RADIO + err = v4l2_device_register(&pci->dev, &chip->v4l2_dev); + if (err < 0) { + snd_es1968_free(chip); + return err; + } + chip->tea.v4l2_dev = &chip->v4l2_dev; chip->tea.private_data = chip; + chip->tea.radio_nr = radio_nr; chip->tea.ops = &snd_es1968_tea_ops; strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card)); sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci)); @@ -2797,6 +2811,7 @@ static int __devinit snd_es1968_probe(struct pci_dev *pci, pcm_substreams_c[dev], pci_id->driver_data, use_pm[dev], + radio_nr[dev], &chip)) < 0) { snd_card_free(card); return err; diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index 9597ef1eccca..a416ea8af3e9 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -58,6 +58,7 @@ static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card * High 16-bits are video (radio) device number + 1 */ static int tea575x_tuner[SNDRV_CARDS]; +static int radio_nr[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = -1}; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for the FM801 soundcard."); @@ -67,6 +68,9 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable FM801 soundcard."); module_param_array(tea575x_tuner, int, NULL, 0444); MODULE_PARM_DESC(tea575x_tuner, "TEA575x tuner access method (0 = auto, 1 = SF256-PCS, 2=SF256-PCP, 3=SF64-PCR, 8=disable, +16=tuner-only)."); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + #define TUNER_DISABLED (1<<3) #define TUNER_ONLY (1<<4) @@ -197,6 +201,7 @@ struct fm801 { struct snd_info_entry *proc_entry; #ifdef CONFIG_SND_FM801_TEA575X_BOOL + struct v4l2_device v4l2_dev; struct snd_tea575x tea; #endif @@ -1154,8 +1159,10 @@ static int snd_fm801_free(struct fm801 *chip) __end_hw: #ifdef CONFIG_SND_FM801_TEA575X_BOOL - if (!(chip->tea575x_tuner & TUNER_DISABLED)) + if (!(chip->tea575x_tuner & TUNER_DISABLED)) { snd_tea575x_exit(&chip->tea); + v4l2_device_unregister(&chip->v4l2_dev); + } #endif if (chip->irq >= 0) free_irq(chip->irq, chip); @@ -1175,6 +1182,7 @@ static int snd_fm801_dev_free(struct snd_device *device) static int __devinit snd_fm801_create(struct snd_card *card, struct pci_dev * pci, int tea575x_tuner, + int radio_nr, struct fm801 ** rchip) { struct fm801 *chip; @@ -1234,6 +1242,13 @@ static int __devinit snd_fm801_create(struct snd_card *card, snd_card_set_dev(card, &pci->dev); #ifdef CONFIG_SND_FM801_TEA575X_BOOL + err = v4l2_device_register(&pci->dev, &chip->v4l2_dev); + if (err < 0) { + snd_fm801_free(chip); + return err; + } + chip->tea.v4l2_dev = &chip->v4l2_dev; + chip->tea.radio_nr = radio_nr; chip->tea.private_data = chip; chip->tea.ops = &snd_fm801_tea_ops; sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci)); @@ -1241,6 +1256,7 @@ static int __devinit snd_fm801_create(struct snd_card *card, (tea575x_tuner & TUNER_TYPE_MASK) < 4) { if (snd_tea575x_init(&chip->tea)) { snd_printk(KERN_ERR "TEA575x radio not found\n"); + snd_fm801_free(chip); return -ENODEV; } } else if ((tea575x_tuner & TUNER_TYPE_MASK) == 0) { @@ -1287,7 +1303,7 @@ static int __devinit snd_card_fm801_probe(struct pci_dev *pci, err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); if (err < 0) return err; - if ((err = snd_fm801_create(card, pci, tea575x_tuner[dev], &chip)) < 0) { + if ((err = snd_fm801_create(card, pci, tea575x_tuner[dev], radio_nr[dev], &chip)) < 0) { snd_card_free(card); return err; } |