Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2019-04-25

Here's the main bluetooth-next pull request for the 5.2 kernel.

 - Added support for Mediatek SDIO controllers
 - Added support for Broadcom BCM2076B1 UART controller
 - Added support for Marvel SD8987 chipset
 - Fix buffer overflow bug in hidp protocol
 - Various other smaller fixes & improvements

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

22 files changed, 1246 insertions, 62 deletions

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 7b2e76e7f22f..b9c34ff9a0d3 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -336,7 +336,7 @@ config BT_MRVL
 	  The core driver to support Marvell Bluetooth devices.
 
 	  This driver is required if you want to support
-	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8997.
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
 
 	  Say Y here to compile Marvell Bluetooth driver
 	  into the kernel or say M to compile it as module.
@@ -350,7 +350,7 @@ config BT_MRVL_SDIO
 	  The driver for Marvell Bluetooth chipsets with SDIO interface.
 
 	  This driver is required if you want to use Marvell Bluetooth
-	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
 	  chipsets are supported.
 
 	  Say Y here to compile support for Marvell BT-over-SDIO driver
@@ -379,6 +379,17 @@ config BT_WILINK
 	  Say Y here to compile support for Texas Instrument's WiLink7 driver
 	  into the kernel or say M to compile it as module (btwilink).
 
+config BT_MTKSDIO
+	tristate "MediaTek HCI SDIO driver"
+	depends on MMC
+	help
+	  MediaTek Bluetooth HCI SDIO driver.
+	  This driver is required if you want to use MediaTek Bluetooth
+	  with SDIO interface.
+
+	  Say Y here to compile support for MediaTek Bluetooth SDIO devices
+	  into the kernel or say M to compile it as module (btmtksdio).
+
 config BT_MTKUART
 	tristate "MediaTek HCI UART driver"
 	depends on SERIAL_DEV_BUS
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index b7e393cfc1e3..34887b9b3a85 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 obj-$(CONFIG_BT_WILINK)		+= btwilink.o
+obj-$(CONFIG_BT_MTKSDIO)	+= btmtksdio.o
 obj-$(CONFIG_BT_MTKUART)	+= btmtkuart.o
 obj-$(CONFIG_BT_QCOMSMD)	+= btqcomsmd.o
 obj-$(CONFIG_BT_BCM)		+= btbcm.o
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index d5d6e6e5da3b..71e74ec08310 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -37,6 +37,7 @@
 #define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
 #define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
 #define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
+#define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}})
 
 int btbcm_check_bdaddr(struct hci_dev *hdev)
 {
@@ -82,7 +83,8 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
 	    !bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
-	    !bacmp(&bda->bdaddr, BDADDR_BCM43430A0)) {
+	    !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) {
 		bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
 			    &bda->bdaddr);
 		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
@@ -333,6 +335,7 @@ struct bcm_subver_table {
 static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x4103, "BCM4330B1"	},	/* 002.001.003 */
 	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
+	{ 0x4204, "BCM2076B1"	},	/* 002.002.004 */
 	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
 	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
 	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 047b75ce1deb..0f3a020703ab 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -235,6 +235,29 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
 	.fw_dump_end = 0xf8,
 };
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
+	.cfg = 0x00,
+	.host_int_mask = 0x08,
+	.host_intstatus = 0x0c,
+	.card_status = 0x5c,
+	.sq_read_base_addr_a0 = 0xf8,
+	.sq_read_base_addr_a1 = 0xf9,
+	.card_revision = 0xc8,
+	.card_fw_status0 = 0xe8,
+	.card_fw_status1 = 0xe9,
+	.card_rx_len = 0xea,
+	.card_rx_unit = 0xeb,
+	.io_port_0 = 0xe4,
+	.io_port_1 = 0xe5,
+	.io_port_2 = 0xe6,
+	.int_read_to_clear = true,
+	.host_int_rsr = 0x04,
+	.card_misc_cfg = 0xd8,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+};
+
 static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
 	.cfg = 0x00,
 	.host_int_mask = 0x08,
@@ -312,6 +335,15 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
 	.supports_fw_dump = true,
 };
 
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8987_uapsta.bin",
+	.reg		= &btmrvl_reg_8987,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl	= 256,
+	.supports_fw_dump = true,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sd8997_uapsta.bin",
@@ -343,6 +375,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8977 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9146),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8977 },
+	/* Marvell SD8987 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x914A),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8987 },
 	/* Marvell SD8997 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
@@ -1797,4 +1832,5 @@ MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8977_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8987_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
new file mode 100644
index 000000000000..813338288453
--- /dev/null
+++ b/drivers/bluetooth/btmtksdio.c
@@ -0,0 +1,1101 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 MediaTek Inc.
+
+/*
+ * Bluetooth support for MediaTek SDIO devices
+ *
+ * This file is written based on btsdio.c and btmtkuart.c.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/atomic.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/skbuff.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "h4_recv.h"
+
+#define VERSION "0.1"
+
+#define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
+#define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
+
+#define MTKBTSDIO_AUTOSUSPEND_DELAY	8000
+
+static bool enable_autosuspend;
+
+struct btmtksdio_data {
+	const char *fwname;
+};
+
+static const struct btmtksdio_data mt7663_data = {
+	.fwname = FIRMWARE_MT7663,
+};
+
+static const struct btmtksdio_data mt7668_data = {
+	.fwname = FIRMWARE_MT7668,
+};
+
+static const struct sdio_device_id btmtksdio_table[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7663),
+	 .driver_data = (kernel_ulong_t)&mt7663_data },
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7668),
+	 .driver_data = (kernel_ulong_t)&mt7668_data },
+	{ }	/* Terminating entry */
+};
+
+#define MTK_REG_CHLPCR		0x4	/* W1S */
+#define C_INT_EN_SET		BIT(0)
+#define C_INT_EN_CLR		BIT(1)
+#define C_FW_OWN_REQ_SET	BIT(8)  /* For write */
+#define C_COM_DRV_OWN		BIT(8)  /* For read */
+#define C_FW_OWN_REQ_CLR	BIT(9)
+
+#define MTK_REG_CSDIOCSR	0x8
+#define SDIO_RE_INIT_EN		BIT(0)
+#define SDIO_INT_CTL		BIT(2)
+
+#define MTK_REG_CHCR		0xc
+#define C_INT_CLR_CTRL		BIT(1)
+
+/* CHISR have the same bits field definition with CHIER */
+#define MTK_REG_CHISR		0x10
+#define MTK_REG_CHIER		0x14
+#define FW_OWN_BACK_INT		BIT(0)
+#define RX_DONE_INT		BIT(1)
+#define TX_EMPTY		BIT(2)
+#define TX_FIFO_OVERFLOW	BIT(8)
+#define RX_PKT_LEN		GENMASK(31, 16)
+
+#define MTK_REG_CTDR		0x18
+
+#define MTK_REG_CRDR		0x1c
+
+#define MTK_SDIO_BLOCK_SIZE	256
+
+#define BTMTKSDIO_TX_WAIT_VND_EVT	1
+
+enum {
+	MTK_WMT_PATCH_DWNLD = 0x1,
+	MTK_WMT_TEST = 0x2,
+	MTK_WMT_WAKEUP = 0x3,
+	MTK_WMT_HIF = 0x4,
+	MTK_WMT_FUNC_CTRL = 0x6,
+	MTK_WMT_RST = 0x7,
+	MTK_WMT_SEMAPHORE = 0x17,
+};
+
+enum {
+	BTMTK_WMT_INVALID,
+	BTMTK_WMT_PATCH_UNDONE,
+	BTMTK_WMT_PATCH_DONE,
+	BTMTK_WMT_ON_UNDONE,
+	BTMTK_WMT_ON_DONE,
+	BTMTK_WMT_ON_PROGRESS,
+};
+
+struct mtkbtsdio_hdr {
+	__le16	len;
+	__le16	reserved;
+	u8	bt_type;
+} __packed;
+
+struct mtk_wmt_hdr {
+	u8	dir;
+	u8	op;
+	__le16	dlen;
+	u8	flag;
+} __packed;
+
+struct mtk_hci_wmt_cmd {
+	struct mtk_wmt_hdr hdr;
+	u8 data[256];
+} __packed;
+
+struct btmtk_hci_wmt_evt {
+	struct hci_event_hdr hhdr;
+	struct mtk_wmt_hdr whdr;
+} __packed;
+
+struct btmtk_hci_wmt_evt_funcc {
+	struct btmtk_hci_wmt_evt hwhdr;
+	__be16 status;
+} __packed;
+
+struct btmtk_tci_sleep {
+	u8 mode;
+	__le16 duration;
+	__le16 host_duration;
+	u8 host_wakeup_pin;
+	u8 time_compensation;
+} __packed;
+
+struct btmtk_hci_wmt_params {
+	u8 op;
+	u8 flag;
+	u16 dlen;
+	const void *data;
+	u32 *status;
+};
+
+struct btmtksdio_dev {
+	struct hci_dev *hdev;
+	struct sdio_func *func;
+	struct device *dev;
+
+	struct work_struct tx_work;
+	unsigned long tx_state;
+	struct sk_buff_head txq;
+
+	struct sk_buff *evt_skb;
+
+	const struct btmtksdio_data *data;
+};
+
+static int mtk_hci_wmt_sync(struct hci_dev *hdev,
+			    struct btmtk_hci_wmt_params *wmt_params)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+	u32 hlen, status = BTMTK_WMT_INVALID;
+	struct btmtk_hci_wmt_evt *wmt_evt;
+	struct mtk_hci_wmt_cmd wc;
+	struct mtk_wmt_hdr *hdr;
+	int err;
+
+	hlen = sizeof(*hdr) + wmt_params->dlen;
+	if (hlen > 255)
+		return -EINVAL;
+
+	hdr = (struct mtk_wmt_hdr *)&wc;
+	hdr->dir = 1;
+	hdr->op = wmt_params->op;
+	hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
+	hdr->flag = wmt_params->flag;
+	memcpy(wc.data, wmt_params->data, wmt_params->dlen);
+
+	set_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+
+	err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
+	if (err < 0) {
+		clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+		return err;
+	}
+
+	/* The vendor specific WMT commands are all answered by a vendor
+	 * specific event and will not have the Command Status or Command
+	 * Complete as with usual HCI command flow control.
+	 *
+	 * After sending the command, wait for BTMTKSDIO_TX_WAIT_VND_EVT
+	 * state to be cleared. The driver specific event receive routine
+	 * will clear that state and with that indicate completion of the
+	 * WMT command.
+	 */
+	err = wait_on_bit_timeout(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT,
+				  TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Execution of wmt command interrupted");
+		clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+		return err;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Execution of wmt command timed out");
+		clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+		return -ETIMEDOUT;
+	}
+
+	/* Parse and handle the return WMT event */
+	wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
+	if (wmt_evt->whdr.op != hdr->op) {
+		bt_dev_err(hdev, "Wrong op received %d expected %d",
+			   wmt_evt->whdr.op, hdr->op);
+		err = -EIO;
+		goto err_free_skb;
+	}
+
+	switch (wmt_evt->whdr.op) {
+	case MTK_WMT_SEMAPHORE:
+		if (wmt_evt->whdr.flag == 2)
+			status = BTMTK_WMT_PATCH_UNDONE;
+		else
+			status = BTMTK_WMT_PATCH_DONE;
+		break;
+	case MTK_WMT_FUNC_CTRL:
+		wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+		if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+			status = BTMTK_WMT_ON_DONE;
+		else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+			status = BTMTK_WMT_ON_PROGRESS;
+		else
+			status = BTMTK_WMT_ON_UNDONE;
+		break;
+	}
+
+	if (wmt_params->status)
+		*wmt_params->status = status;
+
+err_free_skb:
+	kfree_skb(bdev->evt_skb);
+	bdev->evt_skb = NULL;
+
+	return err;
+}
+
+static int btmtksdio_tx_packet(struct btmtksdio_dev *bdev,
+			       struct sk_buff *skb)
+{
+	struct mtkbtsdio_hdr *sdio_hdr;
+	int err;
+
+	/* Make sure that there are enough rooms for SDIO header */
+	if (unlikely(skb_headroom(skb) < sizeof(*sdio_hdr))) {
+		err = pskb_expand_head(skb, sizeof(*sdio_hdr), 0,
+				       GFP_ATOMIC);
+		if (err < 0)
+			return err;
+	}
+
+	/* Prepend MediaTek SDIO Specific Header */
+	skb_push(skb, sizeof(*sdio_hdr));
+
+	sdio_hdr = (void *)skb->data;
+	sdio_hdr->len = cpu_to_le16(skb->len);
+	sdio_hdr->reserved = cpu_to_le16(0);
+	sdio_hdr->bt_type = hci_skb_pkt_type(skb);
+
+	err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data,
+			   round_up(skb->len, MTK_SDIO_BLOCK_SIZE));
+	if (err < 0)
+		goto err_skb_pull;
+
+	bdev->hdev->stat.byte_tx += skb->len;
+
+	kfree_skb(skb);
+
+	return 0;
+
+err_skb_pull:
+	skb_pull(skb, sizeof(*sdio_hdr));
+
+	return err;
+}
+
+static u32 btmtksdio_drv_own_query(struct btmtksdio_dev *bdev)
+{
+	return sdio_readl(bdev->func, MTK_REG_CHLPCR, NULL);
+}
+
+static void btmtksdio_tx_work(struct work_struct *work)
+{
+	struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev,
+						  tx_work);
+	struct sk_buff *skb;
+	int err;
+
+	pm_runtime_get_sync(bdev->dev);
+
+	sdio_claim_host(bdev->func);
+
+	while ((skb = skb_dequeue(&bdev->txq))) {
+		err = btmtksdio_tx_packet(bdev, skb);
+		if (err < 0) {
+			bdev->hdev->stat.err_tx++;
+			skb_queue_head(&bdev->txq, skb);
+			break;
+		}
+	}
+
+	sdio_release_host(bdev->func);
+
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
+}
+
+static int btmtksdio_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct hci_event_hdr *hdr = (void *)skb->data;
+	int err;
+
+	/* Fix up the vendor event id with 0xff for vendor specific instead
+	 * of 0xe4 so that event send via monitoring socket can be parsed
+	 * properly.
+	 */
+	if (hdr->evt == 0xe4)
+		hdr->evt = HCI_EV_VENDOR;
+
+	/* When someone waits for the WMT event, the skb is being cloned
+	 * and being processed the events from there then.
+	 */
+	if (test_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state)) {
+		bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
+		if (!bdev->evt_skb) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+	}
+
+	err = hci_recv_frame(hdev, skb);
+	if (err < 0)
+		goto err_free_skb;
+
+	if (hdr->evt == HCI_EV_VENDOR) {
+		if (test_and_clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT,
+				       &bdev->tx_state)) {
+			/* Barrier to sync with other CPUs */
+			smp_mb__after_atomic();
+			wake_up_bit(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT);
+		}
+	}
+
+	return 0;
+
+err_free_skb:
+	kfree_skb(bdev->evt_skb);
+	bdev->evt_skb = NULL;
+
+err_out:
+	return err;
+}
+
+static const struct h4_recv_pkt mtk_recv_pkts[] = {
+	{ H4_RECV_ACL,      .recv = hci_recv_frame },
+	{ H4_RECV_SCO,      .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,    .recv = btmtksdio_recv_event },
+};
+
+static int btmtksdio_rx_packet(struct btmtksdio_dev *bdev, u16 rx_size)
+{
+	const struct h4_recv_pkt *pkts = mtk_recv_pkts;
+	int pkts_count = ARRAY_SIZE(mtk_recv_pkts);
+	struct mtkbtsdio_hdr *sdio_hdr;
+	int err, i, pad_size;
+	struct sk_buff *skb;
+	u16 dlen;
+
+	if (rx_size < sizeof(*sdio_hdr))
+		return -EILSEQ;
+
+	/* A SDIO packet is exactly containing a Bluetooth packet */
+	skb = bt_skb_alloc(rx_size, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, rx_size);
+
+	err = sdio_readsb(bdev->func, skb->data, MTK_REG_CRDR, rx_size);
+	if (err < 0)
+		goto err_kfree_skb;
+
+	sdio_hdr = (void *)skb->data;
+
+	/* We assume the default error as -EILSEQ simply to make the error path
+	 * be cleaner.
+	 */
+	err = -EILSEQ;
+
+	if (rx_size != le16_to_cpu(sdio_hdr->len)) {
+		bt_dev_err(bdev->hdev, "Rx size in sdio header is mismatched ");
+		goto err_kfree_skb;
+	}
+
+	hci_skb_pkt_type(skb) = sdio_hdr->bt_type;
+
+	/* Remove MediaTek SDIO header */
+	skb_pull(skb, sizeof(*sdio_hdr));
+
+	/* We have to dig into the packet to get payload size and then know how
+	 * many padding bytes at the tail, these padding bytes should be removed
+	 * before the packet is indicated to the core layer.
+	 */
+	for (i = 0; i < pkts_count; i++) {
+		if (sdio_hdr->bt_type == (&pkts[i])->type)
+			break;
+	}
+
+	if (i >= pkts_count) {
+		bt_dev_err(bdev->hdev, "Invalid bt type 0x%02x",
+			   sdio_hdr->bt_type);
+		goto err_kfree_skb;
+	}
+
+	/* Remaining bytes cannot hold a header*/
+	if (skb->len < (&pkts[i])->hlen) {
+		bt_dev_err(bdev->hdev, "The size of bt header is mismatched");
+		goto err_kfree_skb;
+	}
+
+	switch ((&pkts[i])->lsize) {
+		case 1:
+			dlen = skb->data[(&pkts[i])->loff];
+			break;
+		case 2:
+			dlen = get_unaligned_le16(skb->data +
+						  (&pkts[i])->loff);
+			break;
+		default:
+			goto err_kfree_skb;
+	}
+
+	pad_size = skb->len - (&pkts[i])->hlen -  dlen;
+
+	/* Remaining bytes cannot hold a payload */
+	if (pad_size < 0) {
+		bt_dev_err(bdev->hdev, "The size of bt payload is mismatched");
+		goto err_kfree_skb;
+	}
+
+	/* Remove padding bytes */
+	skb_trim(skb, skb->len - pad_size);
+
+	/* Complete frame */
+	(&pkts[i])->recv(bdev->hdev, skb);
+
+	bdev->hdev->stat.byte_rx += rx_size;
+
+	return 0;
+
+err_kfree_skb:
+	kfree_skb(skb);
+
+	return err;
+}
+
+static void btmtksdio_interrupt(struct sdio_func *func)
+{
+	struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+	u32 int_status;
+	u16 rx_size;
+
+	/* It is required that the host gets ownership from the device before
+	 * accessing any register, however, if SDIO host is not being released,
+	 * a potential deadlock probably happens in a circular wait between SDIO
+	 * IRQ work and PM runtime work. So, we have to explicitly release SDIO
+	 * host here and claim again after the PM runtime work is all done.
+	 */
+	sdio_release_host(bdev->func);
+
+	pm_runtime_get_sync(bdev->dev);
+
+	sdio_claim_host(bdev->func);
+
+	/* Disable interrupt */
+	sdio_writel(func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
+
+	int_status = sdio_readl(func, MTK_REG_CHISR, NULL);
+
+	/* Ack an interrupt as soon as possible before any operation on
+	 * hardware.
+	 *
+	 * Note that we don't ack any status during operations to avoid race
+	 * condition between the host and the device such as it's possible to
+	 * mistakenly ack RX_DONE for the next packet and then cause interrupts
+	 * not be raised again but there is still pending data in the hardware
+	 * FIFO.
+	 */
+	sdio_writel(func, int_status, MTK_REG_CHISR, NULL);
+
+	if (unlikely(!int_status))
+		bt_dev_err(bdev->hdev, "CHISR is 0");
+
+	if (int_status & FW_OWN_BACK_INT)
+		bt_dev_dbg(bdev->hdev, "Get fw own back");
+
+	if (int_status & TX_EMPTY)
+		schedule_work(&bdev->tx_work);
+	else if (unlikely(int_status & TX_FIFO_OVERFLOW))
+		bt_dev_warn(bdev->hdev, "Tx fifo overflow");
+
+	if (int_status & RX_DONE_INT) {
+		rx_size = (int_status & RX_PKT_LEN) >> 16;
+
+		if (btmtksdio_rx_packet(bdev, rx_size) < 0)
+			bdev->hdev->stat.err_rx++;
+	}
+
+	/* Enable interrupt */
+	sdio_writel(func, C_INT_EN_SET, MTK_REG_CHLPCR, 0);
+
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
+}
+
+static int btmtksdio_open(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	int err;
+	u32 status;
+
+	sdio_claim_host(bdev->func);
+
+	err = sdio_enable_func(bdev->func);
+	if (err < 0)
+		goto err_release_host;
+
+	/* Get ownership from the device */
+	sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto err_disable_func;
+
+	err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+				 status & C_COM_DRV_OWN, 2000, 1000000);
+	if (err < 0) {
+		bt_dev_err(bdev->hdev, "Cannot get ownership from device");
+		goto err_disable_func;
+	}
+
+	/* Disable interrupt & mask out all interrupt sources */
+	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto err_disable_func;
+
+	sdio_writel(bdev->func, 0, MTK_REG_CHIER, &err);
+	if (err < 0)
+		goto err_disable_func;
+
+	err = sdio_claim_irq(bdev->func, btmtksdio_interrupt);
+	if (err < 0)
+		goto err_disable_func;
+
+	err = sdio_set_block_size(bdev->func, MTK_SDIO_BLOCK_SIZE);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* SDIO CMD 5 allows the SDIO device back to idle state an
+	 * synchronous interrupt is supported in SDIO 4-bit mode
+	 */
+	sdio_writel(bdev->func, SDIO_INT_CTL | SDIO_RE_INIT_EN,
+		    MTK_REG_CSDIOCSR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* Setup write-1-clear for CHISR register */
+	sdio_writel(bdev->func, C_INT_CLR_CTRL, MTK_REG_CHCR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* Setup interrupt sources */
+	sdio_writel(bdev->func, RX_DONE_INT | TX_EMPTY | TX_FIFO_OVERFLOW,
+		    MTK_REG_CHIER, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* Enable interrupt */
+	sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	sdio_release_host(bdev->func);
+
+	return 0;
+
+err_release_irq:
+	sdio_release_irq(bdev->func);
+
+err_disable_func:
+	sdio_disable_func(bdev->func);
+
+err_release_host:
+	sdio_release_host(bdev->func);
+
+	return err;
+}
+
+static int btmtksdio_close(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	u32 status;
+	int err;
+
+	sdio_claim_host(bdev->func);
+
+	/* Disable interrupt */
+	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL);
+
+	sdio_release_irq(bdev->func);
+
+	/* Return ownership to the device */
+	sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, NULL);
+
+	err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+				 !(status & C_COM_DRV_OWN), 2000, 1000000);
+	if (err < 0)
+		bt_dev_err(bdev->hdev, "Cannot return ownership to device");
+
+	sdio_disable_func(bdev->func);
+
+	sdio_release_host(bdev->func);
+
+	return 0;
+}
+
+static int btmtksdio_flush(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	skb_queue_purge(&bdev->txq);
+
+	cancel_work_sync(&bdev->tx_work);
+
+	return 0;
+}
+
+static int btmtksdio_func_query(struct hci_dev *hdev)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	int status, err;
+	u8 param = 0;
+
+	/* Query whether the function is enabled */
+	wmt_params.op = MTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 4;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query function status (%d)", err);
+		return err;
+	}
+
+	return status;
+}
+
+static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	int err, dlen;
+	u8 flag;
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+		return err;
+	}
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	/* The size of patch header is 30 bytes, should be skip */
+	if (fw_size < 30) {
+		err = -EINVAL;
+		goto free_fw;
+	}
+
+	fw_size -= 30;
+	fw_ptr += 30;
+	flag = 1;
+
+	wmt_params.op = MTK_WMT_PATCH_DWNLD;
+	wmt_params.status = NULL;
+
+	while (fw_size > 0) {
+		dlen = min_t(int, 250, fw_size);
+
+		/* Tell device the position in sequence */
+		if (fw_size - dlen <= 0)
+			flag = 3;
+		else if (fw_size < fw->size - 30)
+			flag = 2;
+
+		wmt_params.flag = flag;
+		wmt_params.dlen = dlen;
+		wmt_params.data = fw_ptr;
+
+		err = mtk_hci_wmt_sync(hdev, &wmt_params);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+				   err);
+			goto free_fw;
+		}
+
+		fw_size -= dlen;
+		fw_ptr += dlen;
+	}
+
+	wmt_params.op = MTK_WMT_RST;
+	wmt_params.flag = 4;
+	wmt_params.dlen = 0;
+	wmt_params.data = NULL;
+	wmt_params.status = NULL;
+
+	/* Activate funciton the firmware providing to */
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+		goto free_fw;
+	}
+
+	/* Wait a few moments for firmware activation done */
+	usleep_range(10000, 12000);
+
+free_fw:
+	release_firmware(fw);
+	return err;
+}
+
+static int btmtksdio_setup(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	ktime_t calltime, delta, rettime;
+	struct btmtk_tci_sleep tci_sleep;
+	unsigned long long duration;
+	struct sk_buff *skb;
+	int err, status;
+	u8 param = 0x1;
+
+	calltime = ktime_get();
+
+	/* Query whether the firmware is already download */
+	wmt_params.op = MTK_WMT_SEMAPHORE;
+	wmt_params.flag = 1;
+	wmt_params.dlen = 0;
+	wmt_params.data = NULL;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+		return err;
+	}
+
+	if (status == BTMTK_WMT_PATCH_DONE) {
+		bt_dev_info(hdev, "Firmware already downloaded");
+		goto ignore_setup_fw;
+	}
+
+	/* Setup a firmware which the device definitely requires */
+	err = mtk_setup_firmware(hdev, bdev->data->fwname);
+	if (err < 0)
+		return err;
+
+ignore_setup_fw:
+	/* Query whether the device is already enabled */
+	err = readx_poll_timeout(btmtksdio_func_query, hdev, status,
+				 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+				 2000, 5000000);
+	/* -ETIMEDOUT happens */
+	if (err < 0)
+		return err;
+
+	/* The other errors happen in btusb_mtk_func_query */
+	if (status < 0)
+		return status;
+
+	if (status == BTMTK_WMT_ON_DONE) {
+		bt_dev_info(hdev, "function already on");
+		goto ignore_func_on;
+	}
+
+	/* Enable Bluetooth protocol */
+	wmt_params.op = MTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+ignore_func_on:
+	/* Apply the low power environment setup */
+	tci_sleep.mode = 0x5;
+	tci_sleep.duration = cpu_to_le16(0x640);
+	tci_sleep.host_duration = cpu_to_le16(0x640);
+	tci_sleep.host_wakeup_pin = 0;
+	tci_sleep.time_compensation = 0;
+
+	skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	pm_runtime_set_autosuspend_delay(bdev->dev,
+					 MTKBTSDIO_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(bdev->dev);
+
+	err = pm_runtime_set_active(bdev->dev);
+	if (err < 0)
+		return err;
+
+	/* Default forbid runtime auto suspend, that can be allowed by
+	 * enable_autosuspend flag or the PM runtime entry under sysfs.
+	 */
+	pm_runtime_forbid(bdev->dev);
+	pm_runtime_enable(bdev->dev);
+
+	if (enable_autosuspend)
+		pm_runtime_allow(bdev->dev);
+
+	bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btmtksdio_shutdown(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	u8 param = 0x0;
+	int err;
+
+	/* Get back the state to be consistent with the state
+	 * in btmtksdio_setup.
+	 */
+	pm_runtime_get_sync(bdev->dev);
+
+	/* Disable the device */
+	wmt_params.op = MTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+	pm_runtime_put_noidle(bdev->dev);
+	pm_runtime_disable(bdev->dev);
+
+	return 0;
+}
+
+static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+
+	default:
+		return -EILSEQ;
+	}
+
+	skb_queue_tail(&bdev->txq, skb);
+
+	schedule_work(&bdev->tx_work);
+
+	return 0;
+}
+
+static int btmtksdio_probe(struct sdio_func *func,
+			   const struct sdio_device_id *id)
+{
+	struct btmtksdio_dev *bdev;
+	struct hci_dev *hdev;
+	int err;
+
+	bdev = devm_kzalloc(&func->dev, sizeof(*bdev), GFP_KERNEL);
+	if (!bdev)
+		return -ENOMEM;
+
+	bdev->data = (void *)id->driver_data;
+	if (!bdev->data)
+		return -ENODEV;
+
+	bdev->dev = &func->dev;
+	bdev->func = func;
+
+	INIT_WORK(&bdev->tx_work, btmtksdio_tx_work);
+	skb_queue_head_init(&bdev->txq);
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		dev_err(&func->dev, "Can't allocate HCI device\n");
+		return -ENOMEM;
+	}
+
+	bdev->hdev = hdev;
+
+	hdev->bus = HCI_SDIO;
+	hci_set_drvdata(hdev, bdev);
+
+	hdev->open     = btmtksdio_open;
+	hdev->close    = btmtksdio_close;
+	hdev->flush    = btmtksdio_flush;
+	hdev->setup    = btmtksdio_setup;
+	hdev->shutdown = btmtksdio_shutdown;
+	hdev->send     = btmtksdio_send_frame;
+	SET_HCIDEV_DEV(hdev, &func->dev);
+
+	hdev->manufacturer = 70;
+	set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		dev_err(&func->dev, "Can't register HCI device\n");
+		hci_free_dev(hdev);
+		return err;
+	}
+
+	sdio_set_drvdata(func, bdev);
+
+	/* pm_runtime_enable would be done after the firmware is being
+	 * downloaded because the core layer probably already enables
+	 * runtime PM for this func such as the case host->caps &
+	 * MMC_CAP_POWER_OFF_CARD.
+	 */
+	if (pm_runtime_enabled(bdev->dev))
+		pm_runtime_disable(bdev->dev);
+
+	/* As explaination in drivers/mmc/core/sdio_bus.c tells us:
+	 * Unbound SDIO functions are always suspended.
+	 * During probe, the function is set active and the usage count
+	 * is incremented.  If the driver supports runtime PM,
+	 * it should call pm_runtime_put_noidle() in its probe routine and
+	 * pm_runtime_get_noresume() in its remove routine.
+	 *
+	 * So, put a pm_runtime_put_noidle here !
+	 */
+	pm_runtime_put_noidle(bdev->dev);
+
+	return 0;
+}
+
+static void btmtksdio_remove(struct sdio_func *func)
+{
+	struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+	struct hci_dev *hdev;
+
+	if (!bdev)
+		return;
+
+	/* Be consistent the state in btmtksdio_probe */
+	pm_runtime_get_noresume(bdev->dev);
+
+	hdev = bdev->hdev;
+
+	sdio_set_drvdata(func, NULL);
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+}
+
+#ifdef CONFIG_PM
+static int btmtksdio_runtime_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmtksdio_dev *bdev;
+	u32 status;
+	int err;
+
+	bdev = sdio_get_drvdata(func);
+	if (!bdev)
+		return 0;
+
+	sdio_claim_host(bdev->func);
+
+	sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto out;
+
+	err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+				 !(status & C_COM_DRV_OWN), 2000, 1000000);
+out:
+	bt_dev_info(bdev->hdev, "status (%d) return ownership to device", err);
+
+	sdio_release_host(bdev->func);
+
+	return err;
+}
+
+static int btmtksdio_runtime_resume(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmtksdio_dev *bdev;
+	u32 status;
+	int err;
+
+	bdev = sdio_get_drvdata(func);
+	if (!bdev)
+		return 0;
+
+	sdio_claim_host(bdev->func);
+
+	sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto out;
+
+	err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+				 status & C_COM_DRV_OWN, 2000, 1000000);
+out:
+	bt_dev_info(bdev->hdev, "status (%d) get ownership from device", err);
+
+	sdio_release_host(bdev->func);
+
+	return err;
+}
+
+static UNIVERSAL_DEV_PM_OPS(btmtksdio_pm_ops, btmtksdio_runtime_suspend,
+			    btmtksdio_runtime_resume, NULL);
+#define BTMTKSDIO_PM_OPS (&btmtksdio_pm_ops)
+#else	/* CONFIG_PM */
+#define BTMTKSDIO_PM_OPS NULL
+#endif	/* CONFIG_PM */
+
+static struct sdio_driver btmtksdio_driver = {
+	.name		= "btmtksdio",
+	.probe		= btmtksdio_probe,
+	.remove		= btmtksdio_remove,
+	.id_table	= btmtksdio_table,
+	.drv = {
+		.owner = THIS_MODULE,
+		.pm = BTMTKSDIO_PM_OPS,
+	}
+};
+
+module_sdio_driver(btmtksdio_driver);
+
+module_param(enable_autosuspend, bool, 0644);
+MODULE_PARM_DESC(enable_autosuspend, "Enable autosuspend by default");
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek Bluetooth SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FIRMWARE_MT7663);
+MODULE_FIRMWARE(FIRMWARE_MT7668);
diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index b0b680dd69f4..f5dbeec8e274 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -661,7 +661,7 @@ static int btmtkuart_change_baudrate(struct hci_dev *hdev)
 {
 	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 	struct btmtk_hci_wmt_params wmt_params;
-	u32 baudrate;
+	__le32 baudrate;
 	u8 param;
 	int err;
 
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index c72c56ea7480..6fdc25d7bba7 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -41,7 +41,7 @@
 #define QCA_WCN3990_POWERON_PULSE	0xFC
 #define QCA_WCN3990_POWEROFF_PULSE	0xC0
 
-enum qca_bardrate {
+enum qca_baudrate {
 	QCA_BAUDRATE_115200 	= 0,
 	QCA_BAUDRATE_57600,
 	QCA_BAUDRATE_38400,
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 282d1af1d3ba..4cfa9abe03c8 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -376,20 +376,7 @@ static struct sdio_driver btsdio_driver = {
 	.id_table	= btsdio_table,
 };
 
-static int __init btsdio_init(void)
-{
-	BT_INFO("Generic Bluetooth SDIO driver ver %s", VERSION);
-
-	return sdio_register_driver(&btsdio_driver);
-}
-
-static void __exit btsdio_exit(void)
-{
-	sdio_unregister_driver(&btsdio_driver);
-}
-
-module_init(btsdio_init);
-module_exit(btsdio_exit);
+module_sdio_driver(btsdio_driver);
 
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Generic Bluetooth SDIO driver ver " VERSION);
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index ddbe518c3e5b..b5d31d583d60 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -228,9 +228,15 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 	int err;
 
 	if (powered && !dev->res_enabled) {
-		err = regulator_bulk_enable(BCM_NUM_SUPPLIES, dev->supplies);
-		if (err)
-			return err;
+		/* Intel Macs use bcm_apple_get_resources() and don't
+		 * have regulator supplies configured.
+		 */
+		if (dev->supplies[0].supply) {
+			err = regulator_bulk_enable(BCM_NUM_SUPPLIES,
+						    dev->supplies);
+			if (err)
+				return err;
+		}
 
 		/* LPO clock needs to be 32.768 kHz */
 		err = clk_set_rate(dev->lpo_clk, 32768);
@@ -259,7 +265,13 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 	if (!powered && dev->res_enabled) {
 		clk_disable_unprepare(dev->txco_clk);
 		clk_disable_unprepare(dev->lpo_clk);
-		regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies);
+
+		/* Intel Macs use bcm_apple_get_resources() and don't
+		 * have regulator supplies configured.
+		 */
+		if (dev->supplies[0].supply)
+			regulator_bulk_disable(BCM_NUM_SUPPLIES,
+					       dev->supplies);
 	}
 
 	/* wait for device to power on and come out of reset */
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 069d1c8fde73..3f02ae560120 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -536,7 +536,7 @@ static void h5_unslip_one_byte(struct h5 *h5, unsigned char c)
 	skb_put_data(h5->rx_skb, byte, 1);
 	h5->rx_pending--;
 
-	BT_DBG("unsliped 0x%02hhx, rx_pending %zu", *byte, h5->rx_pending);
+	BT_DBG("unslipped 0x%02hhx, rx_pending %zu", *byte, h5->rx_pending);
 }
 
 static void h5_reset_rx(struct h5 *h5)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 237aea34b69f..7f75652686fe 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -174,6 +174,21 @@ static int qca_power_setup(struct hci_uart *hu, bool on);
 static void qca_power_shutdown(struct hci_uart *hu);
 static int qca_power_off(struct hci_dev *hdev);
 
+static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
+{
+	enum qca_btsoc_type soc_type;
+
+	if (hu->serdev) {
+		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+		soc_type = qsd->btsoc_type;
+	} else {
+		soc_type = QCA_ROME;
+	}
+
+	return soc_type;
+}
+
 static void __serial_clock_on(struct tty_struct *tty)
 {
 	/* TODO: Some chipset requires to enable UART clock on client
@@ -508,6 +523,8 @@ static int qca_open(struct hci_uart *hu)
 		qcadev = serdev_device_get_drvdata(hu->serdev);
 		if (qcadev->btsoc_type != QCA_WCN3990) {
 			gpiod_set_value_cansleep(qcadev->bt_en, 1);
+			/* Controller needs time to bootup. */
+			msleep(150);
 		} else {
 			hu->init_speed = qcadev->init_speed;
 			hu->oper_speed = qcadev->oper_speed;
@@ -963,7 +980,6 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
-	struct qca_serdev *qcadev;
 	struct sk_buff *skb;
 	u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
 
@@ -985,18 +1001,17 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 	skb_queue_tail(&qca->txq, skb);
 	hci_uart_tx_wakeup(hu);
 
-	qcadev = serdev_device_get_drvdata(hu->serdev);
-
 	/* Wait for the baudrate change request to be sent */
 
 	while (!skb_queue_empty(&qca->txq))
 		usleep_range(100, 200);
 
-	serdev_device_wait_until_sent(hu->serdev,
+	if (hu->serdev)
+		serdev_device_wait_until_sent(hu->serdev,
 		      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
 
 	/* Give the controller time to process the request */
-	if (qcadev->btsoc_type == QCA_WCN3990)
+	if (qca_soc_type(hu) == QCA_WCN3990)
 		msleep(10);
 	else
 		msleep(300);
@@ -1072,10 +1087,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
 
 static int qca_check_speeds(struct hci_uart *hu)
 {
-	struct qca_serdev *qcadev;
-
-	qcadev = serdev_device_get_drvdata(hu->serdev);
-	if (qcadev->btsoc_type == QCA_WCN3990) {
+	if (qca_soc_type(hu) == QCA_WCN3990) {
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1091,7 +1103,6 @@ static int qca_check_speeds(struct hci_uart *hu)
 static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 {
 	unsigned int speed, qca_baudrate;
-	struct qca_serdev *qcadev;
 	int ret = 0;
 
 	if (speed_type == QCA_INIT_SPEED) {
@@ -1099,6 +1110,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		if (speed)
 			host_set_baudrate(hu, speed);
 	} else {
+		enum qca_btsoc_type soc_type = qca_soc_type(hu);
+
 		speed = qca_get_speed(hu, QCA_OPER_SPEED);
 		if (!speed)
 			return 0;
@@ -1106,8 +1119,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		/* Disable flow control for wcn3990 to deassert RTS while
 		 * changing the baudrate of chip and host.
 		 */
-		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qcadev->btsoc_type == QCA_WCN3990)
+		if (soc_type == QCA_WCN3990)
 			hci_uart_set_flow_control(hu, true);
 
 		qca_baudrate = qca_get_baudrate_value(speed);
@@ -1119,7 +1131,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		host_set_baudrate(hu, speed);
 
 error:
-		if (qcadev->btsoc_type == QCA_WCN3990)
+		if (soc_type == QCA_WCN3990)
 			hci_uart_set_flow_control(hu, false);
 	}
 
@@ -1181,12 +1193,10 @@ static int qca_setup(struct hci_uart *hu)
 	struct hci_dev *hdev = hu->hdev;
 	struct qca_data *qca = hu->priv;
 	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
-	struct qca_serdev *qcadev;
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 	int ret;
 	int soc_ver = 0;
 
-	qcadev = serdev_device_get_drvdata(hu->serdev);
-
 	ret = qca_check_speeds(hu);
 	if (ret)
 		return ret;
@@ -1194,7 +1204,7 @@ static int qca_setup(struct hci_uart *hu)
 	/* Patch downloading has to be done without IBS mode */
 	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 
-	if (qcadev->btsoc_type == QCA_WCN3990) {
+	if (soc_type == QCA_WCN3990) {
 		bt_dev_info(hdev, "setting up wcn3990");
 
 		/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
@@ -1225,7 +1235,7 @@ static int qca_setup(struct hci_uart *hu)
 		qca_baudrate = qca_get_baudrate_value(speed);
 	}
 
-	if (qcadev->btsoc_type != QCA_WCN3990) {
+	if (soc_type != QCA_WCN3990) {
 		/* Get QCA version information */
 		ret = qca_read_soc_version(hdev, &soc_ver);
 		if (ret)
@@ -1234,7 +1244,7 @@ static int qca_setup(struct hci_uart *hu)
 
 	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
 	/* Setup patch / NVM configurations */
-	ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
+	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver);
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
@@ -1250,7 +1260,7 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	if (qcadev->btsoc_type == QCA_WCN3990)
+	if (soc_type == QCA_WCN3990)
 		hu->hdev->set_bdaddr = qca_set_bdaddr;
 	else
 		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 97ca105347a6..5685805533b5 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -111,6 +111,18 @@ struct sdio_driver {
 extern int sdio_register_driver(struct sdio_driver *);
 extern void sdio_unregister_driver(struct sdio_driver *);
 
+/**
+ * module_sdio_driver() - Helper macro for registering a SDIO driver
+ * @__sdio_driver: sdio_driver struct
+ *
+ * Helper macro for SDIO drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_sdio_driver(__sdio_driver) \
+	module_driver(__sdio_driver, sdio_register_driver, \
+		      sdio_unregister_driver)
+
 /*
  * SDIO I/O operations
  */
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 4332199c71c2..d1a5d5df02f5 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -59,6 +59,8 @@
 #define SDIO_DEVICE_ID_MARVELL_8797_F0		0x9128
 #define SDIO_DEVICE_ID_MARVELL_8887WLAN	0x9134
 
+#define SDIO_VENDOR_ID_MEDIATEK			0x037a
+
 #define SDIO_VENDOR_ID_SIANO			0x039a
 #define SDIO_DEVICE_ID_SIANO_NOVA_B0		0x0201
 #define SDIO_DEVICE_ID_SIANO_NICE		0x0202
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 094e61e07030..05b1b96f4d9e 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -190,6 +190,9 @@ struct adv_info {
 
 #define HCI_MAX_SHORT_NAME_LENGTH	10
 
+/* Min encryption key size to match with SMP */
+#define HCI_MIN_ENC_KEY_SIZE		7
+
 /* Default LE RPA expiry time, 15 minutes */
 #define HCI_DEFAULT_RPA_TIMEOUT		(15 * 60)
 
diff --git a/net/6lowpan/nhc.c b/net/6lowpan/nhc.c
index 4fa2fdda174d..9e56fb98f33c 100644
--- a/net/6lowpan/nhc.c
+++ b/net/6lowpan/nhc.c
@@ -18,7 +18,7 @@
 #include "nhc.h"
 
 static struct rb_root rb_root = RB_ROOT;
-static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX];
+static struct lowpan_nhc *lowpan_nexthdr_nhcs[NEXTHDR_MAX + 1];
 static DEFINE_SPINLOCK(lowpan_nhc_lock);
 
 static int lowpan_nhc_insert(struct lowpan_nhc *nhc)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index bd4978ce8c45..3cf0764d5793 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1276,6 +1276,14 @@ int hci_conn_check_link_mode(struct hci_conn *conn)
 	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 		return 0;
 
+	/* The minimum encryption key size needs to be enforced by the
+	 * host stack before establishing any L2CAP connections. The
+	 * specification in theory allows a minimum of 1, but to align
+	 * BR/EDR and LE transports, a minimum of 7 is chosen.
+	 */
+	if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
+		return 0;
+
 	return 1;
 }
 
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index d6b2540ba7f8..3d9175f130b3 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1460,8 +1460,6 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 			    hdev->set_bdaddr)
 				ret = hdev->set_bdaddr(hdev,
 						       &hdev->public_addr);
-			else
-				ret = -EADDRNOTAVAIL;
 		}
 
 setup_failed:
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 609fd6871c5a..66b631ab0d35 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5433,7 +5433,7 @@ static void hci_le_ext_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
 					   ev->data, ev->length);
 		}
 
-		ptr += sizeof(*ev) + ev->length + 1;
+		ptr += sizeof(*ev) + ev->length;
 	}
 
 	hci_dev_unlock(hdev);
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 9f85a1943be9..2151913892ce 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -75,6 +75,7 @@ static int do_hidp_sock_ioctl(struct socket *sock, unsigned int cmd, void __user
 			sockfd_put(csock);
 			return err;
 		}
+		ca.name[sizeof(ca.name)-1] = 0;
 
 		err = hidp_connection_add(&ca, csock, isock);
 		if (!err && copy_to_user(argp, &ca, sizeof(ca)))
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index f17e393b43b4..b53acd6c9a3d 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -510,12 +510,12 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
 }
 EXPORT_SYMBOL_GPL(l2cap_chan_set_defaults);
 
-static void l2cap_le_flowctl_init(struct l2cap_chan *chan)
+static void l2cap_le_flowctl_init(struct l2cap_chan *chan, u16 tx_credits)
 {
 	chan->sdu = NULL;
 	chan->sdu_last_frag = NULL;
 	chan->sdu_len = 0;
-	chan->tx_credits = 0;
+	chan->tx_credits = tx_credits;
 	/* Derive MPS from connection MTU to stop HCI fragmentation */
 	chan->mps = min_t(u16, chan->imtu, chan->conn->mtu - L2CAP_HDR_SIZE);
 	/* Give enough credits for a full packet */
@@ -1281,7 +1281,7 @@ static void l2cap_le_connect(struct l2cap_chan *chan)
 	if (test_and_set_bit(FLAG_LE_CONN_REQ_SENT, &chan->flags))
 		return;
 
-	l2cap_le_flowctl_init(chan);
+	l2cap_le_flowctl_init(chan, 0);
 
 	req.psm     = chan->psm;
 	req.scid    = cpu_to_le16(chan->scid);
@@ -5532,11 +5532,10 @@ static int l2cap_le_connect_req(struct l2cap_conn *conn,
 	chan->dcid = scid;
 	chan->omtu = mtu;
 	chan->remote_mps = mps;
-	chan->tx_credits = __le16_to_cpu(req->credits);
 
 	__l2cap_chan_add(conn, chan);
 
-	l2cap_le_flowctl_init(chan);
+	l2cap_le_flowctl_init(chan, __le16_to_cpu(req->credits));
 
 	dcid = chan->scid;
 	credits = chan->rx_credits;
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index dcb14abebeba..a7be8b59b3c2 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -791,10 +791,13 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 
 		conn = chan->conn;
 
-		/*change security for LE channels */
+		/* change security for LE channels */
 		if (chan->scid == L2CAP_CID_ATT) {
-			if (smp_conn_security(conn->hcon, sec.level))
+			if (smp_conn_security(conn->hcon, sec.level)) {
+				err = -EINVAL;
 				break;
+			}
+
 			set_bit(FLAG_PENDING_SECURITY, &chan->flags);
 			sk->sk_state = BT_CONFIG;
 			chan->state = BT_CONFIG;
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 2457f408d17d..150114e33b20 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -2301,8 +2301,7 @@ static int load_link_keys(struct sock *sk, struct hci_dev *hdev, void *data,
 				       MGMT_STATUS_INVALID_PARAMS);
 	}
 
-	expected_len = sizeof(*cp) + key_count *
-					sizeof(struct mgmt_link_key_info);
+	expected_len = struct_size(cp, keys, key_count);
 	if (expected_len != len) {
 		bt_dev_err(hdev, "load_link_keys: expected %u bytes, got %u bytes",
 			   expected_len, len);
@@ -5030,7 +5029,7 @@ static int load_irks(struct sock *sk, struct hci_dev *hdev, void *cp_data,
 				       MGMT_STATUS_INVALID_PARAMS);
 	}
 
-	expected_len = sizeof(*cp) + irk_count * sizeof(struct mgmt_irk_info);
+	expected_len = struct_size(cp, irks, irk_count);
 	if (expected_len != len) {
 		bt_dev_err(hdev, "load_irks: expected %u bytes, got %u bytes",
 			   expected_len, len);
@@ -5112,8 +5111,7 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev,
 				       MGMT_STATUS_INVALID_PARAMS);
 	}
 
-	expected_len = sizeof(*cp) + key_count *
-					sizeof(struct mgmt_ltk_info);
+	expected_len = struct_size(cp, keys, key_count);
 	if (expected_len != len) {
 		bt_dev_err(hdev, "load_keys: expected %u bytes, got %u bytes",
 			   expected_len, len);
@@ -5847,8 +5845,7 @@ static int load_conn_param(struct sock *sk, struct hci_dev *hdev, void *data,
 				       MGMT_STATUS_INVALID_PARAMS);
 	}
 
-	expected_len = sizeof(*cp) + param_count *
-					sizeof(struct mgmt_conn_param);
+	expected_len = struct_size(cp, params, param_count);
 	if (expected_len != len) {
 		bt_dev_err(hdev, "load_conn_param: expected %u bytes, got %u bytes",
 			   expected_len, len);