Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux

Pull oprofile and dcookies removal from Viresh Kumar:
 "Remove oprofile and dcookies support

  The 'oprofile' user-space tools don't use the kernel OPROFILE support
  any more, and haven't in a long time. User-space has been converted to
  the perf interfaces.

  The dcookies stuff is only used by the oprofile code. Now that
  oprofile's support is getting removed from the kernel, there is no
  need for dcookies as well.

  Remove kernel's old oprofile and dcookies support"

* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
  fs: Remove dcookies support
  drivers: Remove CONFIG_OPROFILE support
  arch: xtensa: Remove CONFIG_OPROFILE support
  arch: x86: Remove CONFIG_OPROFILE support
  arch: sparc: Remove CONFIG_OPROFILE support
  arch: sh: Remove CONFIG_OPROFILE support
  arch: s390: Remove CONFIG_OPROFILE support
  arch: powerpc: Remove oprofile
  arch: powerpc: Stop building and using oprofile
  arch: parisc: Remove CONFIG_OPROFILE support
  arch: mips: Remove CONFIG_OPROFILE support
  arch: microblaze: Remove CONFIG_OPROFILE support
  arch: ia64: Remove rest of perfmon support
  arch: ia64: Remove CONFIG_OPROFILE support
  arch: hexagon: Don't select HAVE_OPROFILE
  arch: arc: Remove CONFIG_OPROFILE support
  arch: arm: Remove CONFIG_OPROFILE support
  arch: alpha: Remove CONFIG_OPROFILE support

199 files changed, 8 insertions, 15569 deletions

diff --git a/Documentation/RCU/NMI-RCU.rst b/Documentation/RCU/NMI-RCU.rst
index 180958388ff9..2a92bc685ef1 100644
--- a/Documentation/RCU/NMI-RCU.rst
+++ b/Documentation/RCU/NMI-RCU.rst
@@ -8,8 +8,7 @@ Although RCU is usually used to protect read-mostly data structures,
 it is possible to use RCU to provide dynamic non-maskable interrupt
 handlers, as well as dynamic irq handlers.  This document describes
 how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer
-work in "arch/x86/oprofile/nmi_timer_int.c" and in
-"arch/x86/kernel/traps.c".
+work in "arch/x86/kernel/traps.c".
 
 The relevant pieces of code are listed below, each followed by a
 brief explanation::
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a10b545c2070..85f31ca83864 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3458,20 +3458,6 @@
 			For example, to override I2C bus2:
 			omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
 
-	oprofile.timer=	[HW]
-			Use timer interrupt instead of performance counters
-
-	oprofile.cpu_type=	Force an oprofile cpu type
-			This might be useful if you have an older oprofile
-			userland or if you want common events.
-			Format: { arch_perfmon }
-			arch_perfmon: [X86] Force use of architectural
-				perfmon on Intel CPUs instead of the
-				CPU specific event set.
-			timer: [X86] Force use of architectural NMI
-				timer mode (see also oprofile.timer
-				for generic hr timer mode)
-
 	oops=panic	Always panic on oopses. Default is to just kill the
 			process, but there is a small probability of
 			deadlocking the machine.
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index 300d8edcb994..910c6303c7ea 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -1317,7 +1317,6 @@ When kbuild executes, the following steps are followed (roughly):
 		libs-y                 += arch/sparc/lib/
 
 		drivers-$(CONFIG_PM) += arch/sparc/power/
-		drivers-$(CONFIG_OPROFILE)	+= arch/sparc/oprofile/
 
 7.5 Architecture-specific boot images
 -------------------------------------
diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst
index e02ff5ffb653..c6dfe060ec2f 100644
--- a/Documentation/process/magic-number.rst
+++ b/Documentation/process/magic-number.rst
@@ -135,7 +135,6 @@ FW_HEADER_MAGIC       0x65726F66       fw_header                ``drivers/atm/fo
 SLOT_MAGIC            0x67267321       slot                     ``drivers/hotplug/cpqphp.h``
 SLOT_MAGIC            0x67267322       slot                     ``drivers/hotplug/acpiphp.h``
 LO_MAGIC              0x68797548       nbd_device               ``include/linux/nbd.h``
-OPROFILE_MAGIC        0x6f70726f       super_block              ``drivers/oprofile/oprofilefs.h``
 M3_STATE_MAGIC        0x734d724d       m3_state                 ``sound/oss/maestro3.c``
 VMALLOC_MAGIC         0x87654320       snd_alloc_track          ``sound/core/memory.c``
 KMALLOC_MAGIC         0x87654321       snd_alloc_track          ``sound/core/memory.c``
diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst
index 0243d32a0b59..1af30f4228f2 100644
--- a/Documentation/translations/it_IT/process/magic-number.rst
+++ b/Documentation/translations/it_IT/process/magic-number.rst
@@ -141,7 +141,6 @@ FW_HEADER_MAGIC       0x65726F66       fw_header                ``drivers/atm/fo
 SLOT_MAGIC            0x67267321       slot                     ``drivers/hotplug/cpqphp.h``
 SLOT_MAGIC            0x67267322       slot                     ``drivers/hotplug/acpiphp.h``
 LO_MAGIC              0x68797548       nbd_device               ``include/linux/nbd.h``
-OPROFILE_MAGIC        0x6f70726f       super_block              ``drivers/oprofile/oprofilefs.h``
 M3_STATE_MAGIC        0x734d724d       m3_state                 ``sound/oss/maestro3.c``
 VMALLOC_MAGIC         0x87654320       snd_alloc_track          ``sound/core/memory.c``
 KMALLOC_MAGIC         0x87654321       snd_alloc_track          ``sound/core/memory.c``
diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst
index de182bf4191c..7bb9d4165ed3 100644
--- a/Documentation/translations/zh_CN/process/magic-number.rst
+++ b/Documentation/translations/zh_CN/process/magic-number.rst
@@ -124,7 +124,6 @@ FW_HEADER_MAGIC       0x65726F66       fw_header                ``drivers/atm/fo
 SLOT_MAGIC            0x67267321       slot                     ``drivers/hotplug/cpqphp.h``
 SLOT_MAGIC            0x67267322       slot                     ``drivers/hotplug/acpiphp.h``
 LO_MAGIC              0x68797548       nbd_device               ``include/linux/nbd.h``
-OPROFILE_MAGIC        0x6f70726f       super_block              ``drivers/oprofile/oprofilefs.h``
 M3_STATE_MAGIC        0x734d724d       m3_state                 ``sound/oss/maestro3.c``
 VMALLOC_MAGIC         0x87654320       snd_alloc_track          ``sound/core/memory.c``
 KMALLOC_MAGIC         0x87654321       snd_alloc_track          ``sound/core/memory.c``
diff --git a/MAINTAINERS b/MAINTAINERS
index c113989c5cec..01c2666610f4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1413,7 +1413,6 @@ F:	arch/arm*/include/asm/hw_breakpoint.h
 F:	arch/arm*/include/asm/perf_event.h
 F:	arch/arm*/kernel/hw_breakpoint.c
 F:	arch/arm*/kernel/perf_*
-F:	arch/arm/oprofile/common.c
 F:	drivers/perf/
 F:	include/linux/perf/arm_pmu.h
 
@@ -4060,7 +4059,6 @@ W:	http://www.ibm.com/developerworks/power/cell/
 F:	arch/powerpc/include/asm/cell*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/include/uapi/asm/spu*.h
-F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
 CELLWISE CW2015 BATTERY DRIVER
@@ -13291,15 +13289,6 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 F:	sound/drivers/opl4/
 
-OPROFILE
-M:	Robert Richter <rric@kernel.org>
-L:	oprofile-list@lists.sf.net
-S:	Maintained
-F:	arch/*/include/asm/oprofile*.h
-F:	arch/*/oprofile/
-F:	drivers/oprofile/
-F:	include/linux/oprofile.h
-
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
 M:	Mark Fasheh <mark@fasheh.com>
 M:	Joel Becker <jlbec@evilplan.org>
diff --git a/arch/Kconfig b/arch/Kconfig
index b8bbfd3c66b8..87608c2fa027 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -33,38 +33,6 @@ config HOTPLUG_SMT
 config GENERIC_ENTRY
        bool
 
-config OPROFILE
-	tristate "OProfile system profiling"
-	depends on PROFILING
-	depends on HAVE_OPROFILE
-	select RING_BUFFER
-	select RING_BUFFER_ALLOW_SWAP
-	help
-	  OProfile is a profiling system capable of profiling the
-	  whole system, include the kernel, kernel modules, libraries,
-	  and applications.
-
-	  If unsure, say N.
-
-config OPROFILE_EVENT_MULTIPLEX
-	bool "OProfile multiplexing support (EXPERIMENTAL)"
-	default n
-	depends on OPROFILE && X86
-	help
-	  The number of hardware counters is limited. The multiplexing
-	  feature enables OProfile to gather more events than counters
-	  are provided by the hardware. This is realized by switching
-	  between events at a user specified time interval.
-
-	  If unsure, say N.
-
-config HAVE_OPROFILE
-	bool
-
-config OPROFILE_NMI_TIMER
-	def_bool y
-	depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !PPC64
-
 config KPROBES
 	bool "Kprobes"
 	depends on MODULES
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 1f51437d5765..a401c1481a11 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -14,7 +14,6 @@ config ALPHA
 	select HAVE_AOUT
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_IDE
-	select HAVE_OPROFILE
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 12dee59b011c..c2946431d88d 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -40,7 +40,6 @@ head-y := arch/alpha/kernel/head.o
 
 core-y				+= arch/alpha/kernel/ arch/alpha/mm/
 core-$(CONFIG_MATHEMU)		+= arch/alpha/math-emu/
-drivers-$(CONFIG_OPROFILE)	+= arch/alpha/oprofile/
 libs-y				+= arch/alpha/lib/
 
 # export what is needed by arch/alpha/boot/Makefile
diff --git a/arch/alpha/oprofile/Makefile b/arch/alpha/oprofile/Makefile
deleted file mode 100644
index 79f32820a42f..000000000000
--- a/arch/alpha/oprofile/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-ccflags-y := -Werror -Wno-sign-compare
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) common.o
-oprofile-$(CONFIG_ALPHA_GENERIC)	+= op_model_ev4.o \
-					   op_model_ev5.o \
-					   op_model_ev6.o \
-					   op_model_ev67.o
-oprofile-$(CONFIG_ALPHA_EV4)		+= op_model_ev4.o
-oprofile-$(CONFIG_ALPHA_EV5)		+= op_model_ev5.o
-oprofile-$(CONFIG_ALPHA_EV6)		+= op_model_ev6.o \
-					   op_model_ev67.o
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
deleted file mode 100644
index 1b1259c7d7d1..000000000000
--- a/arch/alpha/oprofile/common.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/**
- * @file arch/alpha/oprofile/common.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/special_insns.h>
-
-#include "op_impl.h"
-
-extern struct op_axp_model op_model_ev4 __attribute__((weak));
-extern struct op_axp_model op_model_ev5 __attribute__((weak));
-extern struct op_axp_model op_model_pca56 __attribute__((weak));
-extern struct op_axp_model op_model_ev6 __attribute__((weak));
-extern struct op_axp_model op_model_ev67 __attribute__((weak));
-
-static struct op_axp_model *model;
-
-extern void (*perf_irq)(unsigned long, struct pt_regs *);
-static void (*save_perf_irq)(unsigned long, struct pt_regs *);
-
-static struct op_counter_config ctr[20];
-static struct op_system_config sys;
-static struct op_register_config reg;
-
-/* Called from do_entInt to handle the performance monitor interrupt.  */
-
-static void
-op_handle_interrupt(unsigned long which, struct pt_regs *regs)
-{
-	model->handle_interrupt(which, regs, ctr);
-
-	/* If the user has selected an interrupt frequency that is
-	   not exactly the width of the counter, write a new value
-	   into the counter such that it'll overflow after N more
-	   events.  */
-	if ((reg.need_reset >> which) & 1)
-		model->reset_ctr(&reg, which);
-}
- 
-static int
-op_axp_setup(void)
-{
-	unsigned long i, e;
-
-	/* Install our interrupt handler into the existing hook.  */
-	save_perf_irq = perf_irq;
-	perf_irq = op_handle_interrupt;
-
-	/* Compute the mask of enabled counters.  */
-	for (i = e = 0; i < model->num_counters; ++i)
-		if (ctr[i].enabled)
-			e |= 1 << i;
-	reg.enable = e;
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(&reg, ctr, &sys);
-
-	/* Configure the registers on all cpus.  */
-	smp_call_function(model->cpu_setup, &reg, 1);
-	model->cpu_setup(&reg);
-	return 0;
-}
-
-static void
-op_axp_shutdown(void)
-{
-	/* Remove our interrupt handler.  We may be removing this module.  */
-	perf_irq = save_perf_irq;
-}
-
-static void
-op_axp_cpu_start(void *dummy)
-{
-	wrperfmon(1, reg.enable);
-}
-
-static int
-op_axp_start(void)
-{
-	smp_call_function(op_axp_cpu_start, NULL, 1);
-	op_axp_cpu_start(NULL);
-	return 0;
-}
-
-static inline void
-op_axp_cpu_stop(void *dummy)
-{
-	/* Disable performance monitoring for all counters.  */
-	wrperfmon(0, -1);
-}
-
-static void
-op_axp_stop(void)
-{
-	smp_call_function(op_axp_cpu_stop, NULL, 1);
-	op_axp_cpu_stop(NULL);
-}
-
-static int
-op_axp_create_files(struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-
-		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
-                oprofilefs_create_ulong(dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
-		/* Dummies.  */
-		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	if (model->can_set_proc_mode) {
-		oprofilefs_create_ulong(root, "enable_pal",
-					&sys.enable_pal);
-		oprofilefs_create_ulong(root, "enable_kernel",
-					&sys.enable_kernel);
-		oprofilefs_create_ulong(root, "enable_user",
-					&sys.enable_user);
-	}
-
-	return 0;
-}
-
-int __init
-oprofile_arch_init(struct oprofile_operations *ops)
-{
-	struct op_axp_model *lmodel = NULL;
-
-	switch (implver()) {
-	case IMPLVER_EV4:
-		lmodel = &op_model_ev4;
-		break;
-	case IMPLVER_EV5:
-		/* 21164PC has a slightly different set of events.
-		   Recognize the chip by the presence of the MAX insns.  */
-		if (!amask(AMASK_MAX))
-			lmodel = &op_model_pca56;
-		else
-			lmodel = &op_model_ev5;
-		break;
-	case IMPLVER_EV6:
-		/* 21264A supports ProfileMe.
-		   Recognize the chip by the presence of the CIX insns.  */
-		if (!amask(AMASK_CIX))
-			lmodel = &op_model_ev67;
-		else
-			lmodel = &op_model_ev6;
-		break;
-	}
-
-	if (!lmodel)
-		return -ENODEV;
-	model = lmodel;
-
-	ops->create_files = op_axp_create_files;
-	ops->setup = op_axp_setup;
-	ops->shutdown = op_axp_shutdown;
-	ops->start = op_axp_start;
-	ops->stop = op_axp_stop;
-	ops->cpu_type = lmodel->cpu_type;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       lmodel->cpu_type);
-
-	return 0;
-}
-
-
-void
-oprofile_arch_exit(void)
-{
-}
diff --git a/arch/alpha/oprofile/op_impl.h b/arch/alpha/oprofile/op_impl.h
deleted file mode 100644
index b2b87ae9a353..000000000000
--- a/arch/alpha/oprofile/op_impl.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_impl.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Dummies because I am too lazy to hack the userspace tools.  */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-	unsigned long enable_pal;
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Cached values for the various performance monitoring registers.  */
-struct op_register_config {
-	unsigned long enable;
-	unsigned long mux_select;
-	unsigned long proc_mode;
-	unsigned long freq;
-	unsigned long reset_values;
-	unsigned long need_reset;
-};
-
-/* Per-architecture configuration and hooks.  */
-struct op_axp_model {
-	void (*reg_setup) (struct op_register_config *,
-			   struct op_counter_config *,
-			   struct op_system_config *);
-	void (*cpu_setup) (void *);
-	void (*reset_ctr) (struct op_register_config *, unsigned long);
-	void (*handle_interrupt) (unsigned long, struct pt_regs *,
-				  struct op_counter_config *);
-	char *cpu_type;
-	unsigned char num_counters;
-	unsigned char can_set_proc_mode;
-};
-
-#endif
diff --git a/arch/alpha/oprofile/op_model_ev4.c b/arch/alpha/oprofile/op_model_ev4.c
deleted file mode 100644
index 086a0d5445c5..000000000000
--- a/arch/alpha/oprofile/op_model_ev4.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev4.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev4_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	unsigned long ctl = 0, count, hilo;
-
-	/* Select desired events.  We've mapped the event numbers
-	   such that they fit directly into the event selection fields.
-
-	   Note that there is no "off" setting.  In both cases we select
-	   the EXTERNAL event source, hoping that it'll be the lowest
-	   frequency, and set the frequency counter to LOW.  The interrupts
-	   for these "disabled" counter overflows are ignored by the
-	   interrupt handler.
-
-	   This is most irritating, because the hardware *can* enable and
-	   disable the interrupts for these counters independently, but the
-	   wrperfmon interface doesn't allow it.  */
-
-	ctl |= (ctr[0].enabled ? ctr[0].event << 8 : 14 << 8);
-	ctl |= (ctr[1].enabled ? (ctr[1].event - 16) << 32 : 7ul << 32);
-
-	/* EV4 can not read or write its counter registers.  The only
-	   thing one can do at all is see if you overflow and get an
-	   interrupt.  We can set the width of the counters, to some
-	   extent.  Take the interrupt count selected by the user,
-	   map it onto one of the possible values, and write it back.  */
-
-	count = ctr[0].count;
-	if (count <= 4096)
-		count = 4096, hilo = 1;
-	else
-		count = 65536, hilo = 0;
-	ctr[0].count = count;
-	ctl |= (ctr[0].enabled && hilo) << 3;
-
-	count = ctr[1].count;
-	if (count <= 256)
-		count = 256, hilo = 1;
-	else
-		count = 4096, hilo = 0;
-	ctr[1].count = count;
-	ctl |= (ctr[1].enabled && hilo);
-
-	reg->mux_select = ctl;
-
-	/* Select performance monitoring options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV4 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* Frequency is folded into mux_select for EV4.  */
-	reg->freq = 0;
-
-	/* See above regarding no writes.  */
-	reg->reset_values = 0;
-	reg->need_reset = 0;
-
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev4_cpu_setup(void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-}
-
-static void
-ev4_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* EV4 can't properly disable counters individually.
-	   Discard "disabled" events now.  */
-	if (!ctr[which].enabled)
-		return;
-
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev4 = {
-	.reg_setup		= ev4_reg_setup,
-	.cpu_setup		= ev4_cpu_setup,
-	.reset_ctr		= NULL,
-	.handle_interrupt	= ev4_handle_interrupt,
-	.cpu_type		= "alpha/ev4",
-	.num_counters		= 2,
-	.can_set_proc_mode	= 0,
-};
diff --git a/arch/alpha/oprofile/op_model_ev5.c b/arch/alpha/oprofile/op_model_ev5.c
deleted file mode 100644
index c300f5ef3482..000000000000
--- a/arch/alpha/oprofile/op_model_ev5.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev5.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.
-
-   The 21164 (EV5) and 21164PC (PCA65) vary in the bit placement and
-   meaning of the "CBOX" events.  Given that we don't care about meaning
-   at this point, arrange for the difference in bit placement to be
-   handled by common code.  */
-
-static void
-common_reg_setup(struct op_register_config *reg,
-		 struct op_counter_config *ctr,
-		 struct op_system_config *sys,
-		 int cbox1_ofs, int cbox2_ofs)
-{
-	int i, ctl, reset, need_reset;
-
-	/* Select desired events.  The event numbers are selected such
-	   that they map directly into the event selection fields:
-
-		PCSEL0:	0, 1
-		PCSEL1:	24-39
-		 CBOX1: 40-47
-		PCSEL2: 48-63
-		 CBOX2: 64-71
-
-	   There are two special cases, in that CYCLES can be measured
-	   on PCSEL[02], and SCACHE_WRITE can be measured on CBOX[12].
-	   These event numbers are canonicalizes to their first appearance.  */
-
-	ctl = 0;
-	for (i = 0; i < 3; ++i) {
-		unsigned long event = ctr[i].event;
-		if (!ctr[i].enabled)
-			continue;
-
-		/* Remap the duplicate events, as described above.  */
-		if (i == 2) {
-			if (event == 0)
-				event = 12+48;
-			else if (event == 2+41)
-				event = 4+65;
-		}
-
-		/* Convert the event numbers onto mux_select bit mask.  */
-		if (event < 2)
-			ctl |= event << 31;
-		else if (event < 24)
-			/* error */;
-		else if (event < 40)
-			ctl |= (event - 24) << 4;
-		else if (event < 48)
-			ctl |= (event - 40) << cbox1_ofs | 15 << 4;
-		else if (event < 64)
-			ctl |= event - 48;
-		else if (event < 72)
-			ctl |= (event - 64) << cbox2_ofs | 15;
-	}
-	reg->mux_select = ctl;
-
-	/* Select processor mode.  */
-	/* ??? Need to come up with some mechanism to trace only selected
-	   processes.  For now select from pal, kernel and user mode.  */
-	ctl = 0;
-	ctl |= !sys->enable_pal << 9;
-	ctl |= !sys->enable_kernel << 8;
-	ctl |= !sys->enable_user << 30;
-	reg->proc_mode = ctl;
-
-	/* Select interrupt frequencies.  Take the interrupt count selected
-	   by the user, and map it onto one of the possible counter widths.
-	   If the user value is in between, compute a value to which the
-	   counter is reset at each interrupt.  */
-
-	ctl = reset = need_reset = 0;
-	for (i = 0; i < 3; ++i) {
-		unsigned long max, hilo, count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count <= 256)
-			count = 256, hilo = 3, max = 256;
-		else {
-			max = (i == 2 ? 16384 : 65536);
-			hilo = 2;
-			if (count > max)
-				count = max;
-		}
-		ctr[i].count = count;
-
-		ctl |= hilo << (8 - i*2);
-		reset |= (max - count) << (48 - 16*i);
-		if (count != max)
-			need_reset |= 1 << i;
-	}
-	reg->freq = ctl;
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-static void
-ev5_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	common_reg_setup(reg, ctr, sys, 19, 22);
-}
-
-static void
-pca56_reg_setup(struct op_register_config *reg,
-	        struct op_counter_config *ctr,
-	        struct op_system_config *sys)
-{
-	common_reg_setup(reg, ctr, sys, 8, 11);
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev5_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(4, reg->freq);
-	wrperfmon(6, reg->reset_values);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.
-
-   For EV5, this means disabling profiling, reading the current values,
-   masking in the value for the desired register, writing, then turning
-   profiling back on.
-
-   This can be streamlined if profiling is only enabled for user mode.
-   In that case we know that the counters are not currently incrementing
-   (due to being in kernel mode).  */
-
-static void
-ev5_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	unsigned long values, mask, not_pk, reset_values;
-
-	mask = (ctr == 0 ? 0xfffful << 48
-	        : ctr == 1 ? 0xfffful << 32
-		: 0x3fff << 16);
-
-	not_pk = 1 << 9 | 1 << 8;
-
-	reset_values = reg->reset_values;
-
-	if ((reg->proc_mode & not_pk) == not_pk) {
-		values = wrperfmon(5, 0);
-		values = (reset_values & mask) | (values & ~mask & -2);
-		wrperfmon(6, values);
-	} else {
-		wrperfmon(0, -1);
-		values = wrperfmon(5, 0);
-		values = (reset_values & mask) | (values & ~mask & -2);
-		wrperfmon(6, values);
-		wrperfmon(1, reg->enable);
-	}
-}
-
-static void
-ev5_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev5 = {
-	.reg_setup		= ev5_reg_setup,
-	.cpu_setup		= ev5_cpu_setup,
-	.reset_ctr		= ev5_reset_ctr,
-	.handle_interrupt	= ev5_handle_interrupt,
-	.cpu_type		= "alpha/ev5",
-	.num_counters		= 3,
-	.can_set_proc_mode	= 1,
-};
-
-struct op_axp_model op_model_pca56 = {
-	.reg_setup		= pca56_reg_setup,
-	.cpu_setup		= ev5_cpu_setup,
-	.reset_ctr		= ev5_reset_ctr,
-	.handle_interrupt	= ev5_handle_interrupt,
-	.cpu_type		= "alpha/pca56",
-	.num_counters		= 3,
-	.can_set_proc_mode	= 1,
-};
diff --git a/arch/alpha/oprofile/op_model_ev6.c b/arch/alpha/oprofile/op_model_ev6.c
deleted file mode 100644
index 02edf5971614..000000000000
--- a/arch/alpha/oprofile/op_model_ev6.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev6.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev6_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	unsigned long ctl, reset, need_reset, i;
-
-	/* Select desired events.  We've mapped the event numbers
-	   such that they fit directly into the event selection fields.  */
-	ctl = 0;
-	if (ctr[0].enabled && ctr[0].event)
-		ctl |= (ctr[0].event & 1) << 4;
-	if (ctr[1].enabled)
-		ctl |= (ctr[1].event - 2) & 15;
-	reg->mux_select = ctl;
-
-	/* Select logging options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV6 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* EV6 cannot change the width of the counters as with the
-	   other implementations.  But fortunately, we can write to
-	   the counters and set the value such that it will overflow
-	   at the right time.  */
-	reset = need_reset = 0;
-	for (i = 0; i < 2; ++i) {
-		unsigned long count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count > 0x100000)
-			count = 0x100000;
-		ctr[i].count = count;
-		reset |= (0x100000 - count) << (i ? 6 : 28);
-		if (count != 0x100000)
-			need_reset |= 1 << i;
-	}
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev6_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(6, reg->reset_values | 3);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.  */
-
-static void
-ev6_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	wrperfmon(6, reg->reset_values | (1 << ctr));
-}
-
-static void
-ev6_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev6 = {
-	.reg_setup		= ev6_reg_setup,
-	.cpu_setup		= ev6_cpu_setup,
-	.reset_ctr		= ev6_reset_ctr,
-	.handle_interrupt	= ev6_handle_interrupt,
-	.cpu_type		= "alpha/ev6",
-	.num_counters		= 2,
-	.can_set_proc_mode	= 0,
-};
diff --git a/arch/alpha/oprofile/op_model_ev67.c b/arch/alpha/oprofile/op_model_ev67.c
deleted file mode 100644
index adb1744d20f3..000000000000
--- a/arch/alpha/oprofile/op_model_ev67.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev67.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- * @author Falk Hueffner <falk@debian.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev67_reg_setup(struct op_register_config *reg,
-	       struct op_counter_config *ctr,
-	       struct op_system_config *sys)
-{
-	unsigned long ctl, reset, need_reset, i;
-
-	/* Select desired events.  */
-	ctl = 1UL << 4;		/* Enable ProfileMe mode. */
-
-	/* The event numbers are chosen so we can use them directly if
-	   PCTR1 is enabled.  */
-	if (ctr[1].enabled) {
-		ctl |= (ctr[1].event & 3) << 2;
-	} else {
-		if (ctr[0].event == 0) /* cycles */
-			ctl |= 1UL << 2;
-	}
-	reg->mux_select = ctl;
-
-	/* Select logging options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV67 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* EV67 cannot change the width of the counters as with the
-	   other implementations.  But fortunately, we can write to
-	   the counters and set the value such that it will overflow
-	   at the right time.  */
-	reset = need_reset = 0;
-	for (i = 0; i < 2; ++i) {
-		unsigned long count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count > 0x100000)
-			count = 0x100000;
-		ctr[i].count = count;
-		reset |= (0x100000 - count) << (i ? 6 : 28);
-		if (count != 0x100000)
-			need_reset |= 1 << i;
-	}
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev67_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(6, reg->reset_values | 3);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.  */
-
-static void
-ev67_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	wrperfmon(6, reg->reset_values | (1 << ctr));
-}
-
-/* ProfileMe conditions which will show up as counters. We can also
-   detect the following, but it seems unlikely that anybody is
-   interested in counting them:
-    * Reset
-    * MT_FPCR (write to floating point control register)
-    * Arithmetic trap
-    * Dstream Fault
-    * Machine Check (ECC fault, etc.)
-    * OPCDEC (illegal opcode)
-    * Floating point disabled
-    * Differentiate between DTB single/double misses and 3 or 4 level
-      page tables
-    * Istream access violation
-    * Interrupt
-    * Icache Parity Error.
-    * Instruction killed (nop, trapb)
-
-   Unfortunately, there seems to be no way to detect Dcache and Bcache
-   misses; the latter could be approximated by making the counter
-   count Bcache misses, but that is not precise.
-
-   We model this as 20 counters:
-    * PCTR0
-    * PCTR1
-    * 9 ProfileMe events, induced by PCTR0
-    * 9 ProfileMe events, induced by PCTR1
-*/
-
-enum profileme_counters {
-	PM_STALLED,		/* Stalled for at least one cycle
-				   between the fetch and map stages  */
-	PM_TAKEN,		/* Conditional branch taken */
-	PM_MISPREDICT,		/* Branch caused mispredict trap */
-	PM_ITB_MISS,		/* ITB miss */
-	PM_DTB_MISS,		/* DTB miss */
-	PM_REPLAY,		/* Replay trap */
-	PM_LOAD_STORE,		/* Load-store order trap */
-	PM_ICACHE_MISS,		/* Icache miss */
-	PM_UNALIGNED,		/* Unaligned Load/Store */
-	PM_NUM_COUNTERS
-};
-
-static inline void
-op_add_pm(unsigned long pc, int kern, unsigned long counter,
-	  struct op_counter_config *ctr, unsigned long event)
-{
-	unsigned long fake_counter = 2 + event;
-	if (counter == 1)
-		fake_counter += PM_NUM_COUNTERS;
-	if (ctr[fake_counter].enabled)
-		oprofile_add_pc(pc, kern, fake_counter);
-}
-
-static void
-ev67_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		      struct op_counter_config *ctr)
-{
-	unsigned long pmpc, pctr_ctl;
-	int kern = !user_mode(regs);
-	int mispredict = 0;
-	union {
-		unsigned long v;
-		struct {
-			unsigned reserved:	30; /*  0-29 */
-			unsigned overcount:	 3; /* 30-32 */
-			unsigned icache_miss:	 1; /*    33 */
-			unsigned trap_type:	 4; /* 34-37 */
-			unsigned load_store:	 1; /*    38 */
-			unsigned trap:		 1; /*    39 */
-			unsigned mispredict:	 1; /*    40 */
-		} fields;
-	} i_stat;
-
-	enum trap_types {
-		TRAP_REPLAY,
-		TRAP_INVALID0,
-		TRAP_DTB_DOUBLE_MISS_3,
-		TRAP_DTB_DOUBLE_MISS_4,
-		TRAP_FP_DISABLED,
-		TRAP_UNALIGNED,
-		TRAP_DTB_SINGLE_MISS,
-		TRAP_DSTREAM_FAULT,
-		TRAP_OPCDEC,
-		TRAP_INVALID1,
-		TRAP_MACHINE_CHECK,
-		TRAP_INVALID2,
-		TRAP_ARITHMETIC,
-		TRAP_INVALID3,
-		TRAP_MT_FPCR,
-		TRAP_RESET
-	};
-
-	pmpc = wrperfmon(9, 0);
-	/* ??? Don't know how to handle physical-mode PALcode address.  */
-	if (pmpc & 1)
-		return;
-	pmpc &= ~2;		/* clear reserved bit */
-
-	i_stat.v = wrperfmon(8, 0);
-	if (i_stat.fields.trap) {
-		switch (i_stat.fields.trap_type) {
-		case TRAP_INVALID1:
-		case TRAP_INVALID2:
-		case TRAP_INVALID3:
-			/* Pipeline redirection occurred. PMPC points
-			   to PALcode. Recognize ITB miss by PALcode
-			   offset address, and get actual PC from
-			   EXC_ADDR.  */
-			oprofile_add_pc(regs->pc, kern, which);
-			if ((pmpc & ((1 << 15) - 1)) ==  581)
-				op_add_pm(regs->pc, kern, which,
-					  ctr, PM_ITB_MISS);
-			/* Most other bit and counter values will be
-			   those for the first instruction in the
-			   fault handler, so we're done.  */
-			return;
-		case TRAP_REPLAY:
-			op_add_pm(pmpc, kern, which, ctr,
-				  (i_stat.fields.load_store
-				   ? PM_LOAD_STORE : PM_REPLAY));
-			break;
-		case TRAP_DTB_DOUBLE_MISS_3:
-		case TRAP_DTB_DOUBLE_MISS_4:
-		case TRAP_DTB_SINGLE_MISS:
-			op_add_pm(pmpc, kern, which, ctr, PM_DTB_MISS);
-			break;
-		case TRAP_UNALIGNED:
-			op_add_pm(pmpc, kern, which, ctr, PM_UNALIGNED);
-			break;
-		case TRAP_INVALID0:
-		case TRAP_FP_DISABLED:
-		case TRAP_DSTREAM_FAULT:
-		case TRAP_OPCDEC:
-		case TRAP_MACHINE_CHECK:
-		case TRAP_ARITHMETIC:
-		case TRAP_MT_FPCR:
-		case TRAP_RESET:
-			break;
-		}
-
-		/* ??? JSR/JMP/RET/COR or HW_JSR/HW_JMP/HW_RET/HW_COR
-		   mispredicts do not set this bit but can be
-		   recognized by the presence of one of these
-		   instructions at the PMPC location with bit 39
-		   set.  */
-		if (i_stat.fields.mispredict) {
-			mispredict = 1;
-			op_add_pm(pmpc, kern, which, ctr, PM_MISPREDICT);
-		}
-	}
-
-	oprofile_add_pc(pmpc, kern, which);
-
-	pctr_ctl = wrperfmon(5, 0);
-	if (pctr_ctl & (1UL << 27))
-		op_add_pm(pmpc, kern, which, ctr, PM_STALLED);
-
-	/* Unfortunately, TAK is undefined on mispredicted branches.
-	   ??? It is also undefined for non-cbranch insns, should
-	   check that.  */
-	if (!mispredict && pctr_ctl & (1UL << 0))
-		op_add_pm(pmpc, kern, which, ctr, PM_TAKEN);
-}
-
-struct op_axp_model op_model_ev67 = {
-	.reg_setup		= ev67_reg_setup,
-	.cpu_setup		= ev67_cpu_setup,
-	.reset_ctr		= ev67_reset_ctr,
-	.handle_interrupt	= ev67_handle_interrupt,
-	.cpu_type		= "alpha/ev67",
-	.num_counters		= 20,
-	.can_set_proc_mode	= 0,
-};
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index b55ca77f619b..bc8d6aecfbbd 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -37,7 +37,6 @@ config ARC
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_MOD_ARCH_SPECIFIC
-	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select HANDLE_DOMAIN_IRQ
 	select IRQ_DOMAIN
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 578bdbbb0fa7..4392c9c189c4 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -96,8 +96,6 @@ core-$(CONFIG_ARC_PLAT_TB10X)	+= arch/arc/plat-tb10x/
 core-$(CONFIG_ARC_PLAT_AXS10X)	+= arch/arc/plat-axs10x/
 core-$(CONFIG_ARC_SOC_HSDK)	+= arch/arc/plat-hsdk/
 
-drivers-$(CONFIG_OPROFILE)	+= arch/arc/oprofile/
-
 libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
diff --git a/arch/arc/oprofile/Makefile b/arch/arc/oprofile/Makefile
deleted file mode 100644
index 698367bb41d0..000000000000
--- a/arch/arc/oprofile/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y	:= $(DRIVER_OBJS) common.o
diff --git a/arch/arc/oprofile/common.c b/arch/arc/oprofile/common.c
deleted file mode 100644
index 86bf5899533b..000000000000
--- a/arch/arc/oprofile/common.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * Based on orig code from @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/perf_event.h>
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	/*
-	 * A failure here, forces oprofile core to switch to Timer based PC
-	 * sampling, which will happen if say perf is not enabled/available
-	 */
-	return oprofile_perf_init(ops);
-}
-
-void oprofile_arch_exit(void)
-{
-	oprofile_perf_exit();
-}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6c423ee402ae..6d0ed2888935 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -102,7 +102,6 @@ config ARM
 	select HAVE_KRETPROBES if HAVE_KPROBES
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
-	select HAVE_OPROFILE if HAVE_PERF_EVENTS
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5887de173fc9..dad5502ecc28 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -260,8 +260,6 @@ core-y				+= $(machdirs) $(platdirs)
 core-				+= $(patsubst %,arch/arm/mach-%/, $(machine-))
 core-				+= $(patsubst %,arch/arm/plat-%/, $(plat-))
 
-drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
-
 libs-y				:= arch/arm/lib/ $(libs-y)
 
 # Default target when executing plain make
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 44ff9cd88d81..1ef2bc4c7f69 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -21,7 +21,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_CC_STACKPROTECTOR_REGULAR=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index 66a80b46038d..63fa2eb21b75 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -11,7 +11,6 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_PERF_EVENTS is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 911e880f06ed..15b749f6996d 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -5,7 +5,6 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index bb70acc6b526..1d9fa77bbafc 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -27,7 +27,6 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_PM_DEBUG=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 84a3b055f253..33c917df7b32 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -16,7 +16,6 @@ CONFIG_KALLSYMS_ALL=y
 # CONFIG_BASE_FULL is not set
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 81c45d1baba6..9f862b21b40a 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -67,7 +67,6 @@ CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_KIRKWOOD_CPUIDLE=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index b39b1300a459..cd703c15798f 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -5,7 +5,6 @@ CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 226f2e97c6e2..4f16716bfc32 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -4,7 +4,6 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 3b6e7452609b..3148567b66b6 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -13,7 +13,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index e5afbbae0356..b26ef4866a35 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -62,7 +62,6 @@ CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 4bdbb036ac26..b9e3b647e732 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -5,7 +5,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 8654ece13004..bd7dd81c9c54 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -13,7 +13,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 19d03ea09405..3f36887e8333 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -10,7 +10,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index e73c97b0f5b0..0c60eb382c80 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -18,7 +18,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_VFP=y
 CONFIG_NEON=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 8b2c14424927..f42c7a502b6e 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -5,7 +5,6 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index c01baf7d6e37..4479369540f2 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -11,7 +11,6 @@ CONFIG_CPUSETS=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
deleted file mode 100644
index 39688dc9f181..000000000000
--- a/arch/arm/oprofile/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-ifeq ($(CONFIG_HW_PERF_EVENTS),y)
-DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o)
-endif
-
-oprofile-y				:= $(DRIVER_OBJS) common.o
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
deleted file mode 100644
index 7cb3e0453fcd..000000000000
--- a/arch/arm/oprofile/common.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/**
- * @file common.c
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Copyright 2010 ARM Ltd.
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- * @author Will Deacon [move to perf]
- */
-
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/oprofile.h>
-#include <linux/perf_event.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <asm/stacktrace.h>
-#include <linux/uaccess.h>
-
-#include <asm/perf_event.h>
-#include <asm/ptrace.h>
-
-#ifdef CONFIG_HW_PERF_EVENTS
-
-/*
- * OProfile has a curious naming scheme for the ARM PMUs, but they are
- * part of the user ABI so we need to map from the perf PMU name for
- * supported PMUs.
- */
-static struct op_perf_name {
-	char *perf_name;
-	char *op_name;
-} op_perf_name_map[] = {
-	{ "armv5_xscale1",	"arm/xscale1"	},
-	{ "armv5_xscale2",	"arm/xscale2"	},
-	{ "armv6_1136",		"arm/armv6"	},
-	{ "armv6_1156",		"arm/armv6"	},
-	{ "armv6_1176",		"arm/armv6"	},
-	{ "armv6_11mpcore",	"arm/mpcore"	},
-	{ "armv7_cortex_a8",	"arm/armv7"	},
-	{ "armv7_cortex_a9",	"arm/armv7-ca9"	},
-};
-
-char *op_name_from_perf_id(void)
-{
-	int i;
-	struct op_perf_name names;
-	const char *perf_name = perf_pmu_name();
-
-	for (i = 0; i < ARRAY_SIZE(op_perf_name_map); ++i) {
-		names = op_perf_name_map[i];
-		if (!strcmp(names.perf_name, perf_name))
-			return names.op_name;
-	}
-
-	return NULL;
-}
-#endif
-
-static int report_trace(struct stackframe *frame, void *d)
-{
-	unsigned int *depth = d;
-
-	if (*depth) {
-		oprofile_add_trace(frame->pc);
-		(*depth)--;
-	}
-
-	return *depth == 0;
-}
-
-/*
- * The registers we're interested in are at the end of the variable
- * length saved register structure. The fp points at the end of this
- * structure so the address of this struct is:
- * (struct frame_tail *)(xxx->fp)-1
- */
-struct frame_tail {
-	struct frame_tail *fp;
-	unsigned long sp;
-	unsigned long lr;
-} __attribute__((packed));
-
-static struct frame_tail* user_backtrace(struct frame_tail *tail)
-{
-	struct frame_tail buftail[2];
-
-	/* Also check accessibility of one struct frame_tail beyond */
-	if (!access_ok(tail, sizeof(buftail)))
-		return NULL;
-	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
-		return NULL;
-
-	oprofile_add_trace(buftail[0].lr);
-
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (tail + 1 >= buftail[0].fp)
-		return NULL;
-
-	return buftail[0].fp-1;
-}
-
-static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
-
-	if (!user_mode(regs)) {
-		struct stackframe frame;
-		arm_get_current_stackframe(regs, &frame);
-		walk_stackframe(&frame, report_trace, &depth);
-		return;
-	}
-
-	while (depth-- && tail && !((unsigned long) tail & 3))
-		tail = user_backtrace(tail);
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	/* provide backtrace support also in timer mode: */
-	ops->backtrace		= arm_backtrace;
-
-	return oprofile_perf_init(ops);
-}
-
-void oprofile_arch_exit(void)
-{
-	oprofile_perf_exit();
-}
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 6e00c16a36b5..44a409967af1 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -7,7 +7,6 @@ config HEXAGON
 	select ARCH_32BIT_OFF_T
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_NO_PREEMPT
-	select HAVE_OPROFILE
 	# Other pending projects/to-do items.
 	# select HAVE_REGS_AND_STACK_ACCESS_API
 	# select HAVE_HW_BREAKPOINT if PERF_EVENTS
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index eed59ec32657..2ad7a8d29fcc 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -24,7 +24,6 @@ config IA64
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_EXIT_THREAD
 	select HAVE_IDE
-	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_FTRACE_MCOUNT_RECORD
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 45d5368d6a99..f3328a29e881 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -52,7 +52,6 @@ core-y				+= arch/ia64/kernel/ arch/ia64/mm/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 
 drivers-y			+= arch/ia64/pci/ arch/ia64/hp/common/
-drivers-$(CONFIG_OPROFILE)	+= arch/ia64/oprofile/
 
 PHONY += compressed check
 
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index cfed5ed89301..c409756b5396 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h
index f6ff95b4ecb1..5d267132f8cb 100644
--- a/arch/ia64/include/asm/hw_irq.h
+++ b/arch/ia64/include/asm/hw_irq.h
@@ -69,7 +69,6 @@ extern int ia64_last_device_vector;
 #define IA64_NUM_DEVICE_VECTORS		(IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
 
 #define IA64_MCA_RENDEZ_VECTOR		0xe8	/* MCA rendez interrupt */
-#define IA64_PERFMON_VECTOR		0xee	/* performance monitor interrupt vector */
 #define IA64_TIMER_VECTOR		0xef	/* use highest-prio group 15 interrupt for timer */
 #define	IA64_MCA_WAKEUP_VECTOR		0xf0	/* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
 #define IA64_IPI_LOCAL_TLB_FLUSH	0xfc	/* SMP flush local TLB */
diff --git a/arch/ia64/include/asm/perfmon.h b/arch/ia64/include/asm/perfmon.h
deleted file mode 100644
index e0545869cc8c..000000000000
--- a/arch/ia64/include/asm/perfmon.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2001-2003 Hewlett-Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- */
-#ifndef _ASM_IA64_PERFMON_H
-#define _ASM_IA64_PERFMON_H
-
-#include <uapi/asm/perfmon.h>
-
-
-extern long perfmonctl(int fd, int cmd, void *arg, int narg);
-
-typedef struct {
-	void (*handler)(int irq, void *arg, struct pt_regs *regs);
-} pfm_intr_handler_desc_t;
-
-extern void pfm_save_regs (struct task_struct *);
-extern void pfm_load_regs (struct task_struct *);
-
-extern void pfm_exit_thread(struct task_struct *);
-extern int  pfm_use_debug_registers(struct task_struct *);
-extern int  pfm_release_debug_registers(struct task_struct *);
-extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin);
-extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
-extern void pfm_init_percpu(void);
-extern void pfm_handle_work(void);
-extern int  pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
-extern int  pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
-
-
-
-/*
- * Reset PMD register flags
- */
-#define PFM_PMD_SHORT_RESET	0
-#define PFM_PMD_LONG_RESET	1
-
-typedef union {
-	unsigned int val;
-	struct {
-		unsigned int notify_user:1;	/* notify user program of overflow */
-		unsigned int reset_ovfl_pmds:1;	/* reset overflowed PMDs */
-		unsigned int block_task:1;	/* block monitored task on kernel exit */
-		unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */
-		unsigned int reserved:28;	/* for future use */
-	} bits;
-} pfm_ovfl_ctrl_t;
-
-typedef struct {
-	unsigned char	ovfl_pmd;			/* index of overflowed PMD  */
-	unsigned char   ovfl_notify;			/* =1 if monitor requested overflow notification */
-	unsigned short  active_set;			/* event set active at the time of the overflow */
-	pfm_ovfl_ctrl_t ovfl_ctrl;			/* return: perfmon controls to set by handler */
-
-	unsigned long   pmd_last_reset;			/* last reset value of of the PMD */
-	unsigned long	smpl_pmds[4];			/* bitmask of other PMD of interest on overflow */
-	unsigned long   smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */
-	unsigned long   pmd_value;			/* current 64-bit value of the PMD */
-	unsigned long	pmd_eventid;			/* eventid associated with PMD */
-} pfm_ovfl_arg_t;
-
-
-typedef struct {
-	char		*fmt_name;
-	pfm_uuid_t	fmt_uuid;
-	size_t		fmt_arg_size;
-	unsigned long	fmt_flags;
-
-	int		(*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg);
-	int		(*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size);
-	int 		(*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg);
-	int		(*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp);
-	int		(*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
-	int		(*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
-	int		(*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
-
-	struct list_head fmt_list;
-} pfm_buffer_fmt_t;
-
-extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);
-extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid);
-
-/*
- * perfmon interface exported to modules
- */
-extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
-extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
-extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
-extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
-
-/*
- * describe the content of the local_cpu_date->pfm_syst_info field
- */
-#define PFM_CPUINFO_SYST_WIDE	0x1	/* if set a system wide session exists */
-#define PFM_CPUINFO_DCR_PP	0x2	/* if set the system wide session has started */
-#define PFM_CPUINFO_EXCL_IDLE	0x4	/* the system wide session excludes the idle task */
-
-/*
- * sysctl control structure. visible to sampling formats
- */
-typedef struct {
-	int	debug;		/* turn on/off debugging via syslog */
-	int	debug_ovfl;	/* turn on/off debug printk in overflow handler */
-	int	fastctxsw;	/* turn on/off fast (unsecure) ctxsw */
-	int	expert_mode;	/* turn on/off value checking */
-} pfm_sysctl_t;
-extern pfm_sysctl_t pfm_sysctl;
-
-
-#endif /* _ASM_IA64_PERFMON_H */
diff --git a/arch/ia64/include/uapi/asm/perfmon.h b/arch/ia64/include/uapi/asm/perfmon.h
deleted file mode 100644
index 017548365e5c..000000000000
--- a/arch/ia64/include/uapi/asm/perfmon.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Copyright (C) 2001-2003 Hewlett-Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- */
-
-#ifndef _UAPI_ASM_IA64_PERFMON_H
-#define _UAPI_ASM_IA64_PERFMON_H
-
-/*
- * perfmon commands supported on all CPU models
- */
-#define PFM_WRITE_PMCS		0x01
-#define PFM_WRITE_PMDS		0x02
-#define PFM_READ_PMDS		0x03
-#define PFM_STOP		0x04
-#define PFM_START		0x05
-#define PFM_ENABLE		0x06 /* obsolete */
-#define PFM_DISABLE		0x07 /* obsolete */
-#define PFM_CREATE_CONTEXT	0x08
-#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
-#define PFM_RESTART		0x0a
-#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
-#define PFM_GET_FEATURES	0x0c
-#define PFM_DEBUG		0x0d
-#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
-#define PFM_GET_PMC_RESET_VAL	0x0f
-#define PFM_LOAD_CONTEXT	0x10
-#define PFM_UNLOAD_CONTEXT	0x11
-
-/*
- * PMU model specific commands (may not be supported on all PMU models)
- */
-#define PFM_WRITE_IBRS		0x20
-#define PFM_WRITE_DBRS		0x21
-
-/*
- * context flags
- */
-#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
-#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
-#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
-
-/*
- * event set flags
- */
-#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
-
-/*
- * PMC flags
- */
-#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
-#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
-
-/*
- * PMD/PMC/IBR/DBR return flags (ignored on input)
- *
- * Those flags are used on output and must be checked in case EAGAIN is returned
- * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
- */
-#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
-#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
-#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
-
-#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
-
-typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
-
-/*
- * Request structure used to define a context
- */
-typedef struct {
-	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
-	unsigned long  ctx_flags;	 /* noblock/block */
-	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
-	unsigned short ctx_reserved1;	 /* for future use */
-	int	       ctx_fd;		 /* return arg: unique identification for context */
-	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
-	unsigned long  ctx_reserved2[11];/* for future use */
-} pfarg_context_t;
-
-/*
- * Request structure used to write/read a PMC or PMD
- */
-typedef struct {
-	unsigned int	reg_num;	   /* which register */
-	unsigned short	reg_set;	   /* event set for this register */
-	unsigned short	reg_reserved1;	   /* for future use */
-
-	unsigned long	reg_value;	   /* initial pmc/pmd value */
-	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
-
-	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
-	unsigned long	reg_short_reset;   /* reset after counter overflow */
-
-	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
-	unsigned long	reg_random_seed;   /* seed value when randomization is used */
-	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
-	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
-
-	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
-	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
-
-	unsigned long   reg_reserved2[3];   /* for future use */
-} pfarg_reg_t;
-
-typedef struct {
-	unsigned int	dbreg_num;		/* which debug register */
-	unsigned short	dbreg_set;		/* event set for this register */
-	unsigned short	dbreg_reserved1;	/* for future use */
-	unsigned long	dbreg_value;		/* value for debug register */
-	unsigned long	dbreg_flags;		/* return: dbreg error */
-	unsigned long	dbreg_reserved2[1];	/* for future use */
-} pfarg_dbreg_t;
-
-typedef struct {
-	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
-	unsigned int	ft_reserved;	/* reserved for future use */
-	unsigned long	reserved[4];	/* for future use */
-} pfarg_features_t;
-
-typedef struct {
-	pid_t		load_pid;	   /* process to load the context into */
-	unsigned short	load_set;	   /* first event set to load */
-	unsigned short	load_reserved1;	   /* for future use */
-	unsigned long	load_reserved2[3]; /* for future use */
-} pfarg_load_t;
-
-typedef struct {
-	int		msg_type;		/* generic message header */
-	int		msg_ctx_fd;		/* generic message header */
-	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
-	unsigned short  msg_active_set;		/* active set at the time of overflow */
-	unsigned short  msg_reserved1;		/* for future use */
-	unsigned int    msg_reserved2;		/* for future use */
-	unsigned long	msg_tstamp;		/* for perf tuning/debug */
-} pfm_ovfl_msg_t;
-
-typedef struct {
-	int		msg_type;		/* generic message header */
-	int		msg_ctx_fd;		/* generic message header */
-	unsigned long	msg_tstamp;		/* for perf tuning */
-} pfm_end_msg_t;
-
-typedef struct {
-	int		msg_type;		/* type of the message */
-	int		msg_ctx_fd;		/* unique identifier for the context */
-	unsigned long	msg_tstamp;		/* for perf tuning */
-} pfm_gen_msg_t;
-
-#define PFM_MSG_OVFL	1	/* an overflow happened */
-#define PFM_MSG_END	2	/* task to which context was attached ended */
-
-typedef union {
-	pfm_ovfl_msg_t	pfm_ovfl_msg;
-	pfm_end_msg_t	pfm_end_msg;
-	pfm_gen_msg_t	pfm_gen_msg;
-} pfm_msg_t;
-
-/*
- * Define the version numbers for both perfmon as a whole and the sampling buffer format.
- */
-#define PFM_VERSION_MAJ		 2U
-#define PFM_VERSION_MIN		 0U
-#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
-#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
-#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
-
-
-/*
- * miscellaneous architected definitions
- */
-#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
-#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
-#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
-
-
-#endif /* _UAPI_ASM_IA64_PERFMON_H */
diff --git a/arch/ia64/include/uapi/asm/perfmon_default_smpl.h b/arch/ia64/include/uapi/asm/perfmon_default_smpl.h
deleted file mode 100644
index d3f36aff0e1f..000000000000
--- a/arch/ia64/include/uapi/asm/perfmon_default_smpl.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- *
- * This file implements the default sampling buffer format
- * for Linux/ia64 perfmon subsystem.
- */
-#ifndef __PERFMON_DEFAULT_SMPL_H__
-#define __PERFMON_DEFAULT_SMPL_H__ 1
-
-#define PFM_DEFAULT_SMPL_UUID { \
-		0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97}
-
-/*
- * format specific parameters (passed at context creation)
- */
-typedef struct {
-	unsigned long buf_size;		/* size of the buffer in bytes */
-	unsigned int  flags;		/* buffer specific flags */
-	unsigned int  res1;		/* for future use */
-	unsigned long reserved[2];	/* for future use */
-} pfm_default_smpl_arg_t;
-
-/*
- * combined context+format specific structure. Can be passed
- * to PFM_CONTEXT_CREATE
- */
-typedef struct {
-	pfarg_context_t		ctx_arg;
-	pfm_default_smpl_arg_t	buf_arg;
-} pfm_default_smpl_ctx_arg_t;
-
-/*
- * This header is at the beginning of the sampling buffer returned to the user.
- * It is directly followed by the first record.
- */
-typedef struct {
-	unsigned long	hdr_count;		/* how many valid entries */
-	unsigned long	hdr_cur_offs;		/* current offset from top of buffer */
-	unsigned long	hdr_reserved2;		/* reserved for future use */
-
-	unsigned long	hdr_overflows;		/* how many times the buffer overflowed */
-	unsigned long   hdr_buf_size;		/* how many bytes in the buffer */
-
-	unsigned int	hdr_version;		/* contains perfmon version (smpl format diffs) */
-	unsigned int	hdr_reserved1;		/* for future use */
-	unsigned long	hdr_reserved[10];	/* for future use */
-} pfm_default_smpl_hdr_t;
-
-/*
- * Entry header in the sampling buffer.  The header is directly followed
- * with the values of the PMD registers of interest saved in increasing 
- * index order: PMD4, PMD5, and so on. How many PMDs are present depends 
- * on how the session was programmed.
- *
- * In the case where multiple counters overflow at the same time, multiple
- * entries are written consecutively.
- *
- * last_reset_value member indicates the initial value of the overflowed PMD. 
- */
-typedef struct {
-        int             pid;                    /* thread id (for NPTL, this is gettid()) */
-        unsigned char   reserved1[3];           /* reserved for future use */
-        unsigned char   ovfl_pmd;               /* index of overflowed PMD */
-
-        unsigned long   last_reset_val;         /* initial value of overflowed PMD */
-        unsigned long   ip;                     /* where did the overflow interrupt happened  */
-        unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
-
-        unsigned short  cpu;                    /* cpu on which the overflow occurred */
-        unsigned short  set;                    /* event set active when overflow occurred   */
-        int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
-} pfm_default_smpl_entry_t;
-
-#define PFM_DEFAULT_MAX_PMDS		64 /* how many pmds supported by data structures (sizeof(unsigned long) */
-#define PFM_DEFAULT_MAX_ENTRY_SIZE	(sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS))
-#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE	(sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE)
-
-#define PFM_DEFAULT_SMPL_VERSION_MAJ	2U
-#define PFM_DEFAULT_SMPL_VERSION_MIN	0U
-#define PFM_DEFAULT_SMPL_VERSION	(((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff))
-
-#endif /* __PERFMON_DEFAULT_SMPL_H__ */
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 78fa6579c9ea..64189f04c1a4 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -648,46 +648,6 @@ static int version_info(struct seq_file *m)
 	return 0;
 }
 
-static int perfmon_info(struct seq_file *m)
-{
-	u64 pm_buffer[16];
-	pal_perf_mon_info_u_t pm_info;
-
-	if (ia64_pal_perf_mon_info(pm_buffer, &pm_info) != 0)
-		return 0;
-
-	seq_printf(m,
-		   "PMC/PMD pairs                 : %d\n"
-		   "Counter width                 : %d bits\n"
-		   "Cycle event number            : %d\n"
-		   "Retired event number          : %d\n"
-		   "Implemented PMC               : ",
-		   pm_info.pal_perf_mon_info_s.generic,
-		   pm_info.pal_perf_mon_info_s.width,
-		   pm_info.pal_perf_mon_info_s.cycles,
-		   pm_info.pal_perf_mon_info_s.retired);
-
-	bitregister_process(m, pm_buffer, 256);
-	seq_puts(m, "\nImplemented PMD               : ");
-	bitregister_process(m, pm_buffer+4, 256);
-	seq_puts(m, "\nCycles count capable          : ");
-	bitregister_process(m, pm_buffer+8, 256);
-	seq_puts(m, "\nRetired bundles count capable : ");
-
-#ifdef CONFIG_ITANIUM
-	/*
-	 * PAL_PERF_MON_INFO reports that only PMC4 can be used to count CPU_CYCLES
-	 * which is wrong, both PMC4 and PMD5 support it.
-	 */
-	if (pm_buffer[12] == 0x10)
-		pm_buffer[12]=0x30;
-#endif
-
-	bitregister_process(m, pm_buffer+12, 256);
-	seq_putc(m, '\n');
-	return 0;
-}
-
 static int frequency_info(struct seq_file *m)
 {
 	struct pal_freq_ratio proc, itc, bus;
@@ -816,7 +776,6 @@ static const palinfo_entry_t palinfo_entries[]={
 	{ "power_info",		power_info, },
 	{ "register_info",	register_info, },
 	{ "processor_info",	processor_info, },
-	{ "perfmon_info",	perfmon_info, },
 	{ "frequency_info",	frequency_info, },
 	{ "bus_info",		bus_info },
 	{ "tr_info",		tr_info, }
diff --git a/arch/ia64/kernel/perfmon_default_smpl.c b/arch/ia64/kernel/perfmon_default_smpl.c
deleted file mode 100644
index a40c56020fc5..000000000000
--- a/arch/ia64/kernel/perfmon_default_smpl.c
+++ /dev/null
@@ -1,297 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- *
- * This file implements the default sampling buffer format
- * for the Linux/ia64 perfmon-2 subsystem.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/delay.h>
-#include <linux/smp.h>
-
-#include <asm/perfmon.h>
-#include <asm/perfmon_default_smpl.h>
-
-MODULE_AUTHOR("Stephane Eranian <eranian@hpl.hp.com>");
-MODULE_DESCRIPTION("perfmon default sampling format");
-MODULE_LICENSE("GPL");
-
-#define DEFAULT_DEBUG 1
-
-#ifdef DEFAULT_DEBUG
-#define DPRINT(a) \
-	do { \
-		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
-	} while (0)
-
-#define DPRINT_ovfl(a) \
-	do { \
-		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
-	} while (0)
-
-#else
-#define DPRINT(a)
-#define DPRINT_ovfl(a)
-#endif
-
-static int
-default_validate(struct task_struct *task, unsigned int flags, int cpu, void *data)
-{
-	pfm_default_smpl_arg_t *arg = (pfm_default_smpl_arg_t*)data;
-	int ret = 0;
-
-	if (data == NULL) {
-		DPRINT(("[%d] no argument passed\n", task_pid_nr(task)));
-		return -EINVAL;
-	}
-
-	DPRINT(("[%d] validate flags=0x%x CPU%d\n", task_pid_nr(task), flags, cpu));
-
-	/*
-	 * must hold at least the buffer header + one minimally sized entry
-	 */
-	if (arg->buf_size < PFM_DEFAULT_SMPL_MIN_BUF_SIZE) return -EINVAL;
-
-	DPRINT(("buf_size=%lu\n", arg->buf_size));
-
-	return ret;
-}
-
-static int
-default_get_size(struct task_struct *task, unsigned int flags, int cpu, void *data, unsigned long *size)
-{
-	pfm_default_smpl_arg_t *arg = (pfm_default_smpl_arg_t *)data;
-
-	/*
-	 * size has been validated in default_validate
-	 */
-	*size = arg->buf_size;
-
-	return 0;
-}
-
-static int
-default_init(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *data)
-{
-	pfm_default_smpl_hdr_t *hdr;
-	pfm_default_smpl_arg_t *arg = (pfm_default_smpl_arg_t *)data;
-
-	hdr = (pfm_default_smpl_hdr_t *)buf;
-
-	hdr->hdr_version      = PFM_DEFAULT_SMPL_VERSION;
-	hdr->hdr_buf_size     = arg->buf_size;
-	hdr->hdr_cur_offs     = sizeof(*hdr);
-	hdr->hdr_overflows    = 0UL;
-	hdr->hdr_count        = 0UL;
-
-	DPRINT(("[%d] buffer=%p buf_size=%lu hdr_size=%lu hdr_version=%u cur_offs=%lu\n",
-		task_pid_nr(task),
-		buf,
-		hdr->hdr_buf_size,
-		sizeof(*hdr),
-		hdr->hdr_version,
-		hdr->hdr_cur_offs));
-
-	return 0;
-}
-
-static int
-default_handler(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp)
-{
-	pfm_default_smpl_hdr_t *hdr;
-	pfm_default_smpl_entry_t *ent;
-	void *cur, *last;
-	unsigned long *e, entry_size;
-	unsigned int npmds, i;
-	unsigned char ovfl_pmd;
-	unsigned char ovfl_notify;
-
-	if (unlikely(buf == NULL || arg == NULL|| regs == NULL || task == NULL)) {
-		DPRINT(("[%d] invalid arguments buf=%p arg=%p\n", task->pid, buf, arg));
-		return -EINVAL;
-	}
-
-	hdr         = (pfm_default_smpl_hdr_t *)buf;
-	cur         = buf+hdr->hdr_cur_offs;
-	last        = buf+hdr->hdr_buf_size;
-	ovfl_pmd    = arg->ovfl_pmd;
-	ovfl_notify = arg->ovfl_notify;
-
-	/*
-	 * precheck for sanity
-	 */
-	if ((last - cur) < PFM_DEFAULT_MAX_ENTRY_SIZE) goto full;
-
-	npmds = hweight64(arg->smpl_pmds[0]);
-
-	ent = (pfm_default_smpl_entry_t *)cur;
-
-	prefetch(arg->smpl_pmds_values);
-
-	entry_size = sizeof(*ent) + (npmds << 3);
-
-	/* position for first pmd */
-	e = (unsigned long *)(ent+1);
-
-	hdr->hdr_count++;
-
-	DPRINT_ovfl(("[%d] count=%lu cur=%p last=%p free_bytes=%lu ovfl_pmd=%d ovfl_notify=%d npmds=%u\n",
-			task->pid,
-			hdr->hdr_count,
-			cur, last,
-			last-cur,
-			ovfl_pmd,
-			ovfl_notify, npmds));
-
-	/*
-	 * current = task running at the time of the overflow.
-	 *
-	 * per-task mode:
-	 * 	- this is usually the task being monitored.
-	 * 	  Under certain conditions, it might be a different task
-	 *
-	 * system-wide:
-	 * 	- this is not necessarily the task controlling the session
-	 */
-	ent->pid            = current->pid;
-	ent->ovfl_pmd  	    = ovfl_pmd;
-	ent->last_reset_val = arg->pmd_last_reset; //pmd[0].reg_last_reset_val;
-
-	/*
-	 * where did the fault happen (includes slot number)
-	 */
-	ent->ip = regs->cr_iip | ((regs->cr_ipsr >> 41) & 0x3);
-
-	ent->tstamp    = stamp;
-	ent->cpu       = smp_processor_id();
-	ent->set       = arg->active_set;
-	ent->tgid      = current->tgid;
-
-	/*
-	 * selectively store PMDs in increasing index number
-	 */
-	if (npmds) {
-		unsigned long *val = arg->smpl_pmds_values;
-		for(i=0; i < npmds; i++) {
-			*e++ = *val++;
-		}
-	}
-
-	/*
-	 * update position for next entry
-	 */
-	hdr->hdr_cur_offs += entry_size;
-	cur               += entry_size;
-
-	/*
-	 * post check to avoid losing the last sample
-	 */
-	if ((last - cur) < PFM_DEFAULT_MAX_ENTRY_SIZE) goto full;
-
-	/*
-	 * keep same ovfl_pmds, ovfl_notify
-	 */
-	arg->ovfl_ctrl.bits.notify_user     = 0;
-	arg->ovfl_ctrl.bits.block_task      = 0;
-	arg->ovfl_ctrl.bits.mask_monitoring = 0;
-	arg->ovfl_ctrl.bits.reset_ovfl_pmds = 1; /* reset before returning from interrupt handler */
-
-	return 0;
-full:
-	DPRINT_ovfl(("sampling buffer full free=%lu, count=%lu, ovfl_notify=%d\n", last-cur, hdr->hdr_count, ovfl_notify));
-
-	/*
-	 * increment number of buffer overflow.
-	 * important to detect duplicate set of samples.
-	 */
-	hdr->hdr_overflows++;
-
-	/*
-	 * if no notification requested, then we saturate the buffer
-	 */
-	if (ovfl_notify == 0) {
-		arg->ovfl_ctrl.bits.notify_user     = 0;
-		arg->ovfl_ctrl.bits.block_task      = 0;
-		arg->ovfl_ctrl.bits.mask_monitoring = 1;
-		arg->ovfl_ctrl.bits.reset_ovfl_pmds = 0;
-	} else {
-		arg->ovfl_ctrl.bits.notify_user     = 1;
-		arg->ovfl_ctrl.bits.block_task      = 1; /* ignored for non-blocking context */
-		arg->ovfl_ctrl.bits.mask_monitoring = 1;
-		arg->ovfl_ctrl.bits.reset_ovfl_pmds = 0; /* no reset now */
-	}
-	return -1; /* we are full, sorry */
-}
-
-static int
-default_restart(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs)
-{
-	pfm_default_smpl_hdr_t *hdr;
-
-	hdr = (pfm_default_smpl_hdr_t *)buf;
-
-	hdr->hdr_count    = 0UL;
-	hdr->hdr_cur_offs = sizeof(*hdr);
-
-	ctrl->bits.mask_monitoring = 0;
-	ctrl->bits.reset_ovfl_pmds = 1; /* uses long-reset values */
-
-	return 0;
-}
-
-static int
-default_exit(struct task_struct *task, void *buf, struct pt_regs *regs)
-{
-	DPRINT(("[%d] exit(%p)\n", task_pid_nr(task), buf));
-	return 0;
-}
-
-static pfm_buffer_fmt_t default_fmt={
- 	.fmt_name 	    = "default_format",
- 	.fmt_uuid	    = PFM_DEFAULT_SMPL_UUID,
- 	.fmt_arg_size	    = sizeof(pfm_default_smpl_arg_t),
- 	.fmt_validate	    = default_validate,
- 	.fmt_getsize	    = default_get_size,
- 	.fmt_init	    = default_init,
- 	.fmt_handler	    = default_handler,
- 	.fmt_restart	    = default_restart,
- 	.fmt_restart_active = default_restart,
- 	.fmt_exit	    = default_exit,
-};
-
-static int __init
-pfm_default_smpl_init_module(void)
-{
-	int ret;
-
-	ret = pfm_register_buffer_fmt(&default_fmt);
-	if (ret == 0) {
-		printk("perfmon_default_smpl: %s v%u.%u registered\n",
-			default_fmt.fmt_name,
-			PFM_DEFAULT_SMPL_VERSION_MAJ,
-			PFM_DEFAULT_SMPL_VERSION_MIN);
-	} else {
-		printk("perfmon_default_smpl: %s cannot register ret=%d\n",
-			default_fmt.fmt_name,
-			ret);
-	}
-
-	return ret;
-}
-
-static void __exit
-pfm_default_smpl_cleanup_module(void)
-{
-	int ret;
-	ret = pfm_unregister_buffer_fmt(default_fmt.fmt_uuid);
-
-	printk("perfmon_default_smpl: unregister %s=%d\n", default_fmt.fmt_name, ret);
-}
-
-module_init(pfm_default_smpl_init_module);
-module_exit(pfm_default_smpl_cleanup_module);
-
diff --git a/arch/ia64/kernel/perfmon_generic.h b/arch/ia64/kernel/perfmon_generic.h
deleted file mode 100644
index 96af4696cea9..000000000000
--- a/arch/ia64/kernel/perfmon_generic.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This file contains the generic PMU register description tables
- * and pmc checker used by perfmon.c.
- *
- * Copyright (C) 2002-2003  Hewlett Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- */
-
-static pfm_reg_desc_t pfm_gen_pmc_desc[PMU_MAX_PMCS]={
-/* pmc0  */ { PFM_REG_CONTROL , 0, 0x1UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc1  */ { PFM_REG_CONTROL , 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc2  */ { PFM_REG_CONTROL , 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc3  */ { PFM_REG_CONTROL , 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc4  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {RDEP(4),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc5  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {RDEP(5),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc6  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {RDEP(6),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc7  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {RDEP(7),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-	    { PFM_REG_END     , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}}, /* end marker */
-};
-
-static pfm_reg_desc_t pfm_gen_pmd_desc[PMU_MAX_PMDS]={
-/* pmd0  */ { PFM_REG_NOTIMPL , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}},
-/* pmd1  */ { PFM_REG_NOTIMPL , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}},
-/* pmd2  */ { PFM_REG_NOTIMPL , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}},
-/* pmd3  */ { PFM_REG_NOTIMPL , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}},
-/* pmd4  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(4),0UL, 0UL, 0UL}},
-/* pmd5  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(5),0UL, 0UL, 0UL}},
-/* pmd6  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(6),0UL, 0UL, 0UL}},
-/* pmd7  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(7),0UL, 0UL, 0UL}},
-	    { PFM_REG_END     , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}}, /* end marker */
-};
-
-/*
- * impl_pmcs, impl_pmds are computed at runtime to minimize errors!
- */
-static pmu_config_t pmu_conf_gen={
-	.pmu_name   = "Generic",
-	.pmu_family = 0xff, /* any */
-	.ovfl_val   = (1UL << 32) - 1,
-	.num_ibrs   = 0, /* does not use */
-	.num_dbrs   = 0, /* does not use */
-	.pmd_desc   = pfm_gen_pmd_desc,
-	.pmc_desc   = pfm_gen_pmc_desc
-};
-
diff --git a/arch/ia64/kernel/perfmon_itanium.h b/arch/ia64/kernel/perfmon_itanium.h
index f2d348648a03..dbd04028aafa 100644
--- a/arch/ia64/kernel/perfmon_itanium.h
+++ b/arch/ia64/kernel/perfmon_itanium.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * This file contains the Itanium PMU register description tables
- * and pmc checker used by perfmon.c.
+ * and pmc checker.
  *
  * Copyright (C) 2002-2003  Hewlett Packard Co
  *               Stephane Eranian <eranian@hpl.hp.com>
diff --git a/arch/ia64/kernel/perfmon_mckinley.h b/arch/ia64/kernel/perfmon_mckinley.h
deleted file mode 100644
index a993249e58bc..000000000000
--- a/arch/ia64/kernel/perfmon_mckinley.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This file contains the McKinley PMU register description tables
- * and pmc checker used by perfmon.c.
- *
- * Copyright (C) 2002-2003  Hewlett Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- */
-static int pfm_mck_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnum, unsigned long *val, struct pt_regs *regs);
-
-static pfm_reg_desc_t pfm_mck_pmc_desc[PMU_MAX_PMCS]={
-/* pmc0  */ { PFM_REG_CONTROL , 0, 0x1UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc1  */ { PFM_REG_CONTROL , 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc2  */ { PFM_REG_CONTROL , 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc3  */ { PFM_REG_CONTROL , 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc4  */ { PFM_REG_COUNTING, 6, 0x0000000000800000UL, 0xfffff7fUL, NULL, pfm_mck_pmc_check, {RDEP(4),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc5  */ { PFM_REG_COUNTING, 6, 0x0UL, 0xfffff7fUL, NULL,  pfm_mck_pmc_check, {RDEP(5),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc6  */ { PFM_REG_COUNTING, 6, 0x0UL, 0xfffff7fUL, NULL,  pfm_mck_pmc_check, {RDEP(6),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc7  */ { PFM_REG_COUNTING, 6, 0x0UL, 0xfffff7fUL, NULL,  pfm_mck_pmc_check, {RDEP(7),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc8  */ { PFM_REG_CONFIG  , 0, 0xffffffff3fffffffUL, 0xffffffff3ffffffbUL, NULL, pfm_mck_pmc_check, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc9  */ { PFM_REG_CONFIG  , 0, 0xffffffff3ffffffcUL, 0xffffffff3ffffffbUL, NULL, pfm_mck_pmc_check, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc10 */ { PFM_REG_MONITOR , 4, 0x0UL, 0xffffUL, NULL, pfm_mck_pmc_check, {RDEP(0)|RDEP(1),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc11 */ { PFM_REG_MONITOR , 6, 0x0UL, 0x30f01cf, NULL,  pfm_mck_pmc_check, {RDEP(2)|RDEP(3)|RDEP(17),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc12 */ { PFM_REG_MONITOR , 6, 0x0UL, 0xffffUL, NULL,  pfm_mck_pmc_check, {RDEP(8)|RDEP(9)|RDEP(10)|RDEP(11)|RDEP(12)|RDEP(13)|RDEP(14)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc13 */ { PFM_REG_CONFIG  , 0, 0x00002078fefefefeUL, 0x1e00018181818UL, NULL, pfm_mck_pmc_check, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc14 */ { PFM_REG_CONFIG  , 0, 0x0db60db60db60db6UL, 0x2492UL, NULL, pfm_mck_pmc_check, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-/* pmc15 */ { PFM_REG_CONFIG  , 0, 0x00000000fffffff0UL, 0xfUL, NULL, pfm_mck_pmc_check, {0UL,0UL, 0UL, 0UL}, {0UL,0UL, 0UL, 0UL}},
-	    { PFM_REG_END     , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}}, /* end marker */
-};
-
-static pfm_reg_desc_t pfm_mck_pmd_desc[PMU_MAX_PMDS]={
-/* pmd0  */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(1),0UL, 0UL, 0UL}, {RDEP(10),0UL, 0UL, 0UL}},
-/* pmd1  */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(0),0UL, 0UL, 0UL}, {RDEP(10),0UL, 0UL, 0UL}},
-/* pmd2  */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(3)|RDEP(17),0UL, 0UL, 0UL}, {RDEP(11),0UL, 0UL, 0UL}},
-/* pmd3  */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(2)|RDEP(17),0UL, 0UL, 0UL}, {RDEP(11),0UL, 0UL, 0UL}},
-/* pmd4  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(4),0UL, 0UL, 0UL}},
-/* pmd5  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(5),0UL, 0UL, 0UL}},
-/* pmd6  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(6),0UL, 0UL, 0UL}},
-/* pmd7  */ { PFM_REG_COUNTING, 0, 0x0UL, -1UL, NULL, NULL, {0UL,0UL, 0UL, 0UL}, {RDEP(7),0UL, 0UL, 0UL}},
-/* pmd8  */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(9)|RDEP(10)|RDEP(11)|RDEP(12)|RDEP(13)|RDEP(14)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd9  */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(10)|RDEP(11)|RDEP(12)|RDEP(13)|RDEP(14)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd10 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(9)|RDEP(11)|RDEP(12)|RDEP(13)|RDEP(14)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd11 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(9)|RDEP(10)|RDEP(12)|RDEP(13)|RDEP(14)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd12 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(9)|RDEP(10)|RDEP(11)|RDEP(13)|RDEP(14)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd13 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(9)|RDEP(10)|RDEP(11)|RDEP(12)|RDEP(14)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd14 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(9)|RDEP(10)|RDEP(11)|RDEP(12)|RDEP(13)|RDEP(15)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd15 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(9)|RDEP(10)|RDEP(11)|RDEP(12)|RDEP(13)|RDEP(14)|RDEP(16),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd16 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(8)|RDEP(9)|RDEP(10)|RDEP(11)|RDEP(12)|RDEP(13)|RDEP(14)|RDEP(15),0UL, 0UL, 0UL}, {RDEP(12),0UL, 0UL, 0UL}},
-/* pmd17 */ { PFM_REG_BUFFER  , 0, 0x0UL, -1UL, NULL, NULL, {RDEP(2)|RDEP(3),0UL, 0UL, 0UL}, {RDEP(11),0UL, 0UL, 0UL}},
-	    { PFM_REG_END     , 0, 0x0UL, -1UL, NULL, NULL, {0,}, {0,}}, /* end marker */
-};
-
-/*
- * PMC reserved fields must have their power-up values preserved
- */
-static int
-pfm_mck_reserved(unsigned int cnum, unsigned long *val, struct pt_regs *regs)
-{
-	unsigned long tmp1, tmp2, ival = *val;
-
-	/* remove reserved areas from user value */
-	tmp1 = ival & PMC_RSVD_MASK(cnum);
-
-	/* get reserved fields values */
-	tmp2 = PMC_DFL_VAL(cnum) & ~PMC_RSVD_MASK(cnum);
-
-	*val = tmp1 | tmp2;
-
-	DPRINT(("pmc[%d]=0x%lx, mask=0x%lx, reset=0x%lx, val=0x%lx\n",
-		  cnum, ival, PMC_RSVD_MASK(cnum), PMC_DFL_VAL(cnum), *val));
-	return 0;
-}
-
-/*
- * task can be NULL if the context is unloaded
- */
-static int
-pfm_mck_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnum, unsigned long *val, struct pt_regs *regs)
-{
-	int ret = 0, check_case1 = 0;
-	unsigned long val8 = 0, val14 = 0, val13 = 0;
-	int is_loaded;
-
-	/* first preserve the reserved fields */
-	pfm_mck_reserved(cnum, val, regs);
-
-	/* sanitfy check */
-	if (ctx == NULL) return -EINVAL;
-
-	is_loaded = ctx->ctx_state == PFM_CTX_LOADED || ctx->ctx_state == PFM_CTX_MASKED;
-
-	/*
-	 * we must clear the debug registers if pmc13 has a value which enable
-	 * memory pipeline event constraints. In this case we need to clear the
-	 * the debug registers if they have not yet been accessed. This is required
-	 * to avoid picking stale state.
-	 * PMC13 is "active" if:
-	 * 	one of the pmc13.cfg_dbrpXX field is different from 0x3
-	 * AND
-	 * 	at the corresponding pmc13.ena_dbrpXX is set.
-	 */
-	DPRINT(("cnum=%u val=0x%lx, using_dbreg=%d loaded=%d\n", cnum, *val, ctx->ctx_fl_using_dbreg, is_loaded));
-
-	if (cnum == 13 && is_loaded
-	    && (*val & 0x1e00000000000UL) && (*val & 0x18181818UL) != 0x18181818UL && ctx->ctx_fl_using_dbreg == 0) {
-
-		DPRINT(("pmc[%d]=0x%lx has active pmc13 settings, clearing dbr\n", cnum, *val));
-
-		/* don't mix debug with perfmon */
-		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
-
-		/*
-		 * a count of 0 will mark the debug registers as in use and also
-		 * ensure that they are properly cleared.
-		 */
-		ret = pfm_write_ibr_dbr(PFM_DATA_RR, ctx, NULL, 0, regs);
-		if (ret) return ret;
-	}
-	/*
-	 * we must clear the (instruction) debug registers if any pmc14.ibrpX bit is enabled
-	 * before they are (fl_using_dbreg==0) to avoid picking up stale information.
-	 */
-	if (cnum == 14 && is_loaded && ((*val & 0x2222UL) != 0x2222UL) && ctx->ctx_fl_using_dbreg == 0) {
-
-		DPRINT(("pmc[%d]=0x%lx has active pmc14 settings, clearing ibr\n", cnum, *val));
-
-		/* don't mix debug with perfmon */
-		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
-
-		/*
-		 * a count of 0 will mark the debug registers as in use and also
-		 * ensure that they are properly cleared.
-		 */
-		ret = pfm_write_ibr_dbr(PFM_CODE_RR, ctx, NULL, 0, regs);
-		if (ret) return ret;
-
-	}
-
-	switch(cnum) {
-		case  4: *val |= 1UL << 23; /* force power enable bit */
-			 break;
-		case  8: val8 = *val;
-			 val13 = ctx->ctx_pmcs[13];
-			 val14 = ctx->ctx_pmcs[14];
-			 check_case1 = 1;
-			 break;
-		case 13: val8  = ctx->ctx_pmcs[8];
-			 val13 = *val;
-			 val14 = ctx->ctx_pmcs[14];
-			 check_case1 = 1;
-			 break;
-		case 14: val8  = ctx->ctx_pmcs[8];
-			 val13 = ctx->ctx_pmcs[13];
-			 val14 = *val;
-			 check_case1 = 1;
-			 break;
-	}
-	/* check illegal configuration which can produce inconsistencies in tagging
-	 * i-side events in L1D and L2 caches
-	 */
-	if (check_case1) {
-		ret =   ((val13 >> 45) & 0xf) == 0
-		   && ((val8 & 0x1) == 0)
-		   && ((((val14>>1) & 0x3) == 0x2 || ((val14>>1) & 0x3) == 0x0)
-		       ||(((val14>>4) & 0x3) == 0x2 || ((val14>>4) & 0x3) == 0x0));
-
-		if (ret) DPRINT((KERN_DEBUG "perfmon: failure check_case1\n"));
-	}
-
-	return ret ? -EINVAL : 0;
-}
-
-/*
- * impl_pmcs, impl_pmds are computed at runtime to minimize errors!
- */
-static pmu_config_t pmu_conf_mck={
-	.pmu_name      = "Itanium 2",
-	.pmu_family    = 0x1f,
-	.flags	       = PFM_PMU_IRQ_RESEND,
-	.ovfl_val      = (1UL << 47) - 1,
-	.pmd_desc      = pfm_mck_pmd_desc,
-	.pmc_desc      = pfm_mck_pmc_desc,
-	.num_ibrs       = 8,
-	.num_dbrs       = 8,
-	.use_rr_dbregs = 1 /* debug register are use for range restrictions */
-};
-
-
diff --git a/arch/ia64/kernel/perfmon_montecito.h b/arch/ia64/kernel/perfmon_montecito.h
deleted file mode 100644
index c0b5b9110c88..000000000000
--- a/arch/ia64/kernel/perfmon_montecito.h
+++ /dev/null
@@ -1,270 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This file contains the Montecito PMU register description tables
- * and pmc checker used by perfmon.c.
- *
- * Copyright (c) 2005-2006 Hewlett-Packard Development Company, L.P.
- *               Contributed by Stephane Eranian <eranian@hpl.hp.com>
- */
-static int pfm_mont_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnum, unsigned long *val, struct pt_regs *regs);
-
-#define RDEP_MONT_ETB	(RDEP(38)|RDEP(39)|RDEP(48)|RDEP(49)|RDEP(50)|RDEP(51)|RDEP(52)|RDEP(53)|RDEP(54)|\
-			 RDEP(55)|RDEP(56)|RDEP(57)|RDEP(58)|RDEP(59)|RDEP(60)|RDEP(61)|RDEP(62)|RDEP(63))
-#define RDEP_MONT_DEAR  (RDEP(32)|RDEP(33)|RDEP(36))
-#define RDEP_MONT_IEAR  (RDEP(34)|RDEP(35))
-
-static pfm_reg_desc_t pfm_mont_pmc_desc[PMU_MAX_PMCS]={
-/* pmc0  */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc1  */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc2  */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc3  */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc4  */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(4),0, 0, 0}, {0,0, 0, 0}},
-/* pmc5  */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(5),0, 0, 0}, {0,0, 0, 0}},
-/* pmc6  */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(6),0, 0, 0}, {0,0, 0, 0}},
-/* pmc7  */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(7),0, 0, 0}, {0,0, 0, 0}},
-/* pmc8  */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(8),0, 0, 0}, {0,0, 0, 0}},
-/* pmc9  */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(9),0, 0, 0}, {0,0, 0, 0}},
-/* pmc10 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(10),0, 0, 0}, {0,0, 0, 0}},
-/* pmc11 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(11),0, 0, 0}, {0,0, 0, 0}},
-/* pmc12 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(12),0, 0, 0}, {0,0, 0, 0}},
-/* pmc13 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(13),0, 0, 0}, {0,0, 0, 0}},
-/* pmc14 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(14),0, 0, 0}, {0,0, 0, 0}},
-/* pmc15 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(15),0, 0, 0}, {0,0, 0, 0}},
-/* pmc16 */ { PFM_REG_NOTIMPL, },
-/* pmc17 */ { PFM_REG_NOTIMPL, },
-/* pmc18 */ { PFM_REG_NOTIMPL, },
-/* pmc19 */ { PFM_REG_NOTIMPL, },
-/* pmc20 */ { PFM_REG_NOTIMPL, },
-/* pmc21 */ { PFM_REG_NOTIMPL, },
-/* pmc22 */ { PFM_REG_NOTIMPL, },
-/* pmc23 */ { PFM_REG_NOTIMPL, },
-/* pmc24 */ { PFM_REG_NOTIMPL, },
-/* pmc25 */ { PFM_REG_NOTIMPL, },
-/* pmc26 */ { PFM_REG_NOTIMPL, },
-/* pmc27 */ { PFM_REG_NOTIMPL, },
-/* pmc28 */ { PFM_REG_NOTIMPL, },
-/* pmc29 */ { PFM_REG_NOTIMPL, },
-/* pmc30 */ { PFM_REG_NOTIMPL, },
-/* pmc31 */ { PFM_REG_NOTIMPL, },
-/* pmc32 */ { PFM_REG_CONFIG,  0, 0x30f01ffffffffffUL, 0x30f01ffffffffffUL, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc33 */ { PFM_REG_CONFIG,  0, 0x0,  0x1ffffffffffUL, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc34 */ { PFM_REG_CONFIG,  0, 0xf01ffffffffffUL, 0xf01ffffffffffUL, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc35 */ { PFM_REG_CONFIG,  0, 0x0,  0x1ffffffffffUL, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc36 */ { PFM_REG_CONFIG,  0, 0xfffffff0, 0xf, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc37 */ { PFM_REG_MONITOR, 4, 0x0, 0x3fff, NULL, pfm_mont_pmc_check, {RDEP_MONT_IEAR, 0, 0, 0}, {0, 0, 0, 0}},
-/* pmc38 */ { PFM_REG_CONFIG,  0, 0xdb6, 0x2492, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc39 */ { PFM_REG_MONITOR, 6, 0x0, 0xffcf, NULL, pfm_mont_pmc_check, {RDEP_MONT_ETB,0, 0, 0}, {0,0, 0, 0}},
-/* pmc40 */ { PFM_REG_MONITOR, 6, 0x2000000, 0xf01cf, NULL, pfm_mont_pmc_check, {RDEP_MONT_DEAR,0, 0, 0}, {0,0, 0, 0}},
-/* pmc41 */ { PFM_REG_CONFIG,  0, 0x00002078fefefefeUL, 0x1e00018181818UL, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
-/* pmc42 */ { PFM_REG_MONITOR, 6, 0x0, 0x7ff4f, NULL, pfm_mont_pmc_check, {RDEP_MONT_ETB,0, 0, 0}, {0,0, 0, 0}},
-	    { PFM_REG_END    , 0, 0x0, -1, NULL, NULL, {0,}, {0,}}, /* end marker */
-};
-
-static pfm_reg_desc_t pfm_mont_pmd_desc[PMU_MAX_PMDS]={
-/* pmd0  */ { PFM_REG_NOTIMPL, }, 
-/* pmd1  */ { PFM_REG_NOTIMPL, },
-/* pmd2  */ { PFM_REG_NOTIMPL, },
-/* pmd3  */ { PFM_REG_NOTIMPL, },
-/* pmd4  */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(4),0, 0, 0}},
-/* pmd5  */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(5),0, 0, 0}},
-/* pmd6  */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(6),0, 0, 0}},
-/* pmd7  */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(7),0, 0, 0}},
-/* pmd8  */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(8),0, 0, 0}}, 
-/* pmd9  */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(9),0, 0, 0}},
-/* pmd10 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(10),0, 0, 0}},
-/* pmd11 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(11),0, 0, 0}},
-/* pmd12 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(12),0, 0, 0}},
-/* pmd13 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(13),0, 0, 0}},
-/* pmd14 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(14),0, 0, 0}},
-/* pmd15 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(15),0, 0, 0}},
-/* pmd16 */ { PFM_REG_NOTIMPL, },
-/* pmd17 */ { PFM_REG_NOTIMPL, },
-/* pmd18 */ { PFM_REG_NOTIMPL, },
-/* pmd19 */ { PFM_REG_NOTIMPL, },
-/* pmd20 */ { PFM_REG_NOTIMPL, },
-/* pmd21 */ { PFM_REG_NOTIMPL, },
-/* pmd22 */ { PFM_REG_NOTIMPL, },
-/* pmd23 */ { PFM_REG_NOTIMPL, },
-/* pmd24 */ { PFM_REG_NOTIMPL, },
-/* pmd25 */ { PFM_REG_NOTIMPL, },
-/* pmd26 */ { PFM_REG_NOTIMPL, },
-/* pmd27 */ { PFM_REG_NOTIMPL, },
-/* pmd28 */ { PFM_REG_NOTIMPL, },
-/* pmd29 */ { PFM_REG_NOTIMPL, },
-/* pmd30 */ { PFM_REG_NOTIMPL, },
-/* pmd31 */ { PFM_REG_NOTIMPL, },
-/* pmd32 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(33)|RDEP(36),0, 0, 0}, {RDEP(40),0, 0, 0}},
-/* pmd33 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(32)|RDEP(36),0, 0, 0}, {RDEP(40),0, 0, 0}},
-/* pmd34 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(35),0, 0, 0}, {RDEP(37),0, 0, 0}},
-/* pmd35 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(34),0, 0, 0}, {RDEP(37),0, 0, 0}},
-/* pmd36 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(32)|RDEP(33),0, 0, 0}, {RDEP(40),0, 0, 0}},
-/* pmd37 */ { PFM_REG_NOTIMPL, },
-/* pmd38 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd39 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd40 */ { PFM_REG_NOTIMPL, },
-/* pmd41 */ { PFM_REG_NOTIMPL, },
-/* pmd42 */ { PFM_REG_NOTIMPL, },
-/* pmd43 */ { PFM_REG_NOTIMPL, },
-/* pmd44 */ { PFM_REG_NOTIMPL, },
-/* pmd45 */ { PFM_REG_NOTIMPL, },
-/* pmd46 */ { PFM_REG_NOTIMPL, },
-/* pmd47 */ { PFM_REG_NOTIMPL, },
-/* pmd48 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd49 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd50 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd51 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd52 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd53 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd54 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd55 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd56 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd57 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd58 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd59 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd60 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd61 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd62 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-/* pmd63 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
-	    { PFM_REG_END   , 0, 0x0, -1, NULL, NULL, {0,}, {0,}}, /* end marker */
-};
-
-/*
- * PMC reserved fields must have their power-up values preserved
- */
-static int
-pfm_mont_reserved(unsigned int cnum, unsigned long *val, struct pt_regs *regs)
-{
-	unsigned long tmp1, tmp2, ival = *val;
-
-	/* remove reserved areas from user value */
-	tmp1 = ival & PMC_RSVD_MASK(cnum);
-
-	/* get reserved fields values */
-	tmp2 = PMC_DFL_VAL(cnum) & ~PMC_RSVD_MASK(cnum);
-
-	*val = tmp1 | tmp2;
-
-	DPRINT(("pmc[%d]=0x%lx, mask=0x%lx, reset=0x%lx, val=0x%lx\n",
-		  cnum, ival, PMC_RSVD_MASK(cnum), PMC_DFL_VAL(cnum), *val));
-	return 0;
-}
-
-/*
- * task can be NULL if the context is unloaded
- */
-static int
-pfm_mont_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnum, unsigned long *val, struct pt_regs *regs)
-{
-	int ret = 0;
-	unsigned long val32 = 0, val38 = 0, val41 = 0;
-	unsigned long tmpval;
-	int check_case1 = 0;
-	int is_loaded;
-
-	/* first preserve the reserved fields */
-	pfm_mont_reserved(cnum, val, regs);
-
-	tmpval = *val;
-
-	/* sanity check */
-	if (ctx == NULL) return -EINVAL;
-
-	is_loaded = ctx->ctx_state == PFM_CTX_LOADED || ctx->ctx_state == PFM_CTX_MASKED;
-
-	/*
-	 * we must clear the debug registers if pmc41 has a value which enable
-	 * memory pipeline event constraints. In this case we need to clear the
-	 * the debug registers if they have not yet been accessed. This is required
-	 * to avoid picking stale state.
-	 * PMC41 is "active" if:
-	 * 	one of the pmc41.cfg_dtagXX field is different from 0x3
-	 * AND
-	 * 	at the corresponding pmc41.en_dbrpXX is set.
-	 * AND
-	 *	ctx_fl_using_dbreg == 0  (i.e., dbr not yet used)
-	 */
-	DPRINT(("cnum=%u val=0x%lx, using_dbreg=%d loaded=%d\n", cnum, tmpval, ctx->ctx_fl_using_dbreg, is_loaded));
-
-	if (cnum == 41 && is_loaded 
-	    && (tmpval & 0x1e00000000000UL) && (tmpval & 0x18181818UL) != 0x18181818UL && ctx->ctx_fl_using_dbreg == 0) {
-
-		DPRINT(("pmc[%d]=0x%lx has active pmc41 settings, clearing dbr\n", cnum, tmpval));
-
-		/* don't mix debug with perfmon */
-		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
-
-		/*
-		 * a count of 0 will mark the debug registers if:
-		 * AND
-		 */
-		ret = pfm_write_ibr_dbr(PFM_DATA_RR, ctx, NULL, 0, regs);
-		if (ret) return ret;
-	}
-	/*
-	 * we must clear the (instruction) debug registers if:
-	 * 	pmc38.ig_ibrpX is 0 (enabled)
-	 * AND
-	 *	ctx_fl_using_dbreg == 0  (i.e., dbr not yet used)
-	 */
-	if (cnum == 38 && is_loaded && ((tmpval & 0x492UL) != 0x492UL) && ctx->ctx_fl_using_dbreg == 0) {
-
-		DPRINT(("pmc38=0x%lx has active pmc38 settings, clearing ibr\n", tmpval));
-
-		/* don't mix debug with perfmon */
-		if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
-
-		/*
-		 * a count of 0 will mark the debug registers as in use and also
-		 * ensure that they are properly cleared.
-		 */
-		ret = pfm_write_ibr_dbr(PFM_CODE_RR, ctx, NULL, 0, regs);
-		if (ret) return ret;
-
-	}
-	switch(cnum) {
-		case  32: val32 = *val;
-			  val38 = ctx->ctx_pmcs[38];
-			  val41 = ctx->ctx_pmcs[41];
-			  check_case1 = 1;
-			  break;
-		case  38: val38 = *val;
-			  val32 = ctx->ctx_pmcs[32];
-			  val41 = ctx->ctx_pmcs[41];
-			  check_case1 = 1;
-			  break;
-		case  41: val41 = *val;
-			  val32 = ctx->ctx_pmcs[32];
-			  val38 = ctx->ctx_pmcs[38];
-			  check_case1 = 1;
-			  break;
-	}
-	/* check illegal configuration which can produce inconsistencies in tagging
-	 * i-side events in L1D and L2 caches
-	 */
-	if (check_case1) {
-		ret =   (((val41 >> 45) & 0xf) == 0 && ((val32>>57) & 0x1) == 0)
-		     && ((((val38>>1) & 0x3) == 0x2 || ((val38>>1) & 0x3) == 0)
-		     ||  (((val38>>4) & 0x3) == 0x2 || ((val38>>4) & 0x3) == 0));
-		if (ret) {
-			DPRINT(("invalid config pmc38=0x%lx pmc41=0x%lx pmc32=0x%lx\n", val38, val41, val32));
-			return -EINVAL;
-		}
-	}
-	*val = tmpval;
-	return 0;
-}
-
-/*
- * impl_pmcs, impl_pmds are computed at runtime to minimize errors!
- */
-static pmu_config_t pmu_conf_mont={
-	.pmu_name        = "Montecito",
-	.pmu_family      = 0x20,
-	.flags           = PFM_PMU_IRQ_RESEND,
-	.ovfl_val        = (1UL << 47) - 1,
-	.pmd_desc        = pfm_mont_pmd_desc,
-	.pmc_desc        = pfm_mont_pmc_desc,
-	.num_ibrs        = 8,
-	.num_dbrs        = 8,
-	.use_rr_dbregs   = 1 /* debug register are use for range retrictions */
-};
diff --git a/arch/ia64/oprofile/Makefile b/arch/ia64/oprofile/Makefile
deleted file mode 100644
index fc7944d462f4..000000000000
--- a/arch/ia64/oprofile/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
diff --git a/arch/ia64/oprofile/backtrace.c b/arch/ia64/oprofile/backtrace.c
deleted file mode 100644
index 6a219a946050..000000000000
--- a/arch/ia64/oprofile/backtrace.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/**
- * @file backtrace.c
- *
- * @remark Copyright 2004 Silicon Graphics Inc.  All Rights Reserved.
- * @remark Read the file COPYING
- *
- * @author Greg Banks <gnb@melbourne.sgi.com>
- * @author Keith Owens <kaos@melbourne.sgi.com>
- * Based on work done for the ia64 port of the SGI kernprof patch, which is
- *    Copyright (c) 2003-2004 Silicon Graphics Inc.  All Rights Reserved.
- */
-
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/ptrace.h>
-
-/*
- * For IA64 we need to perform a complex little dance to get both
- * the struct pt_regs and a synthetic struct switch_stack in place
- * to allow the unwind code to work.  This dance requires our unwind
- * using code to be called from a function called from unw_init_running().
- * There we only get a single void* data pointer, so use this struct
- * to hold all the data we need during the unwind.
- */
-typedef struct
-{
-	unsigned int depth;
-	struct pt_regs *regs;
-	struct unw_frame_info frame;
-	unsigned long *prev_pfs_loc;	/* state for WAR for old spinlock ool code */
-} ia64_backtrace_t;
-
-/* Returns non-zero if the PC is in the Interrupt Vector Table */
-static __inline__ int in_ivt_code(unsigned long pc)
-{
-	extern char ia64_ivt[];
-	return (pc >= (u_long)ia64_ivt && pc < (u_long)ia64_ivt+32768);
-}
-
-/*
- * Unwind to next stack frame.
- */
-static __inline__ int next_frame(ia64_backtrace_t *bt)
-{
-	/*
-	 * Avoid unsightly console message from unw_unwind() when attempting
-	 * to unwind through the Interrupt Vector Table which has no unwind
-	 * information.
-	 */
-	if (in_ivt_code(bt->frame.ip))
-		return 0;
-
-	/*
-	 * WAR for spinlock contention from leaf functions.  ia64_spinlock_contention_pre3_4
-	 * has ar.pfs == r0.  Leaf functions do not modify ar.pfs so ar.pfs remains
-	 * as 0, stopping the backtrace.  Record the previous ar.pfs when the current
-	 * IP is in ia64_spinlock_contention_pre3_4 then unwind, if pfs_loc has not changed
-	 * after unwind then use pt_regs.ar_pfs which is where the real ar.pfs is for
-	 * leaf functions.
-	 */
-	if (bt->prev_pfs_loc && bt->regs && bt->frame.pfs_loc == bt->prev_pfs_loc)
-		bt->frame.pfs_loc = &bt->regs->ar_pfs;
-	bt->prev_pfs_loc = NULL;
-
-	return unw_unwind(&bt->frame) == 0;
-}
-
-
-static void do_ia64_backtrace(struct unw_frame_info *info, void *vdata)
-{
-	ia64_backtrace_t *bt = vdata;
-	struct switch_stack *sw;
-	int count = 0;
-	u_long pc, sp;
-
-	sw = (struct switch_stack *)(info+1);
-	/* padding from unw_init_running */
-	sw = (struct switch_stack *)(((unsigned long)sw + 15) & ~15);
-
-	unw_init_frame_info(&bt->frame, current, sw);
-
-	/* skip over interrupt frame and oprofile calls */
-	do {
-		unw_get_sp(&bt->frame, &sp);
-		if (sp >= (u_long)bt->regs)
-			break;
-		if (!next_frame(bt))
-			return;
-	} while (count++ < 200);
-
-	/* finally, grab the actual sample */
-	while (bt->depth-- && next_frame(bt)) {
-		unw_get_ip(&bt->frame, &pc);
-		oprofile_add_trace(pc);
-		if (unw_is_intr_frame(&bt->frame)) {
-			/*
-			 * Interrupt received on kernel stack; this can
-			 * happen when timer interrupt fires while processing
-			 * a softirq from the tail end of a hardware interrupt
-			 * which interrupted a system call.  Don't laugh, it
-			 * happens!  Splice the backtrace into two parts to
-			 * avoid spurious cycles in the gprof output.
-			 */
-			/* TODO: split rather than drop the 2nd half */
-			break;
-		}
-	}
-}
-
-void
-ia64_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	ia64_backtrace_t bt;
-	unsigned long flags;
-
-	/*
-	 * On IA64 there is little hope of getting backtraces from
-	 * user space programs -- the problems of getting the unwind
-	 * information from arbitrary user programs are extreme.
-	 */
-	if (user_mode(regs))
-		return;
-
-	bt.depth = depth;
-	bt.regs = regs;
-	bt.prev_pfs_loc = NULL;
-	local_irq_save(flags);
-	unw_init_running(do_ia64_backtrace, &bt);
-	local_irq_restore(flags);
-}
diff --git a/arch/ia64/oprofile/init.c b/arch/ia64/oprofile/init.c
deleted file mode 100644
index a692ba16a07b..000000000000
--- a/arch/ia64/oprofile/init.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
- 
-extern int perfmon_init(struct oprofile_operations *ops);
-extern void perfmon_exit(void);
-extern void ia64_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	ops->backtrace = ia64_backtrace;
-	return -ENODEV;
-}
-
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index f82795592ce5..25a5a3fb14aa 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -30,7 +30,6 @@ config MICROBLAZE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
-	select HAVE_OPROFILE
 	select HAVE_PCI
 	select IRQ_DOMAIN
 	select XILINX_INTC
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index bb980891816d..b41f323e1fde 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -54,8 +54,6 @@ core-y += arch/microblaze/kernel/
 core-y += arch/microblaze/mm/
 core-$(CONFIG_PCI) += arch/microblaze/pci/
 
-drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
-
 boot := arch/microblaze/boot
 
 # Are we making a simpleImage.<boardname> target? If so, crack out the boardname
diff --git a/arch/microblaze/oprofile/Makefile b/arch/microblaze/oprofile/Makefile
deleted file mode 100644
index 107f2f55d995..000000000000
--- a/arch/microblaze/oprofile/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# arch/microblaze/oprofile/Makefile
-#
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) microblaze_oprofile.o
diff --git a/arch/microblaze/oprofile/microblaze_oprofile.c b/arch/microblaze/oprofile/microblaze_oprofile.c
deleted file mode 100644
index def17e59888e..000000000000
--- a/arch/microblaze/oprofile/microblaze_oprofile.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Microblaze oprofile code
- *
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2009 PetaLogix
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	return -1;
-}
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f29ec95e3458..465bc5425d4c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -74,7 +74,6 @@ config MIPS
 	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
-	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
@@ -2845,7 +2844,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
+	depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index cd4343edeb11..f62a6d951d3c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -316,7 +316,6 @@ libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/mips/math-emu/
 core-y += arch/mips/
 
 drivers-y			+= arch/mips/crypto/
-drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
 # suspend and hibernation support
 drivers-$(CONFIG_PM)	+= arch/mips/power/
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 023b4e644b1c..5c24ac7fdf56 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -22,7 +22,6 @@ CONFIG_MIPS32_N32=y
 # CONFIG_SUSPEND is not set
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/sda3"
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 7b1fab518317..1ae48f7d9ddd 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -14,7 +14,6 @@ CONFIG_SGI_IP32=y
 CONFIG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 688c91918db2..aaf9d5e0aa2c 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -21,7 +21,6 @@ CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/hda3"
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bbe0f39f8088..205d3b34528c 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -17,7 +17,6 @@ CONFIG_PCCARD=m
 CONFIG_YENTA=m
 CONFIG_PD6729=m
 CONFIG_I82092=m
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/mips/configs/rs90_defconfig b/arch/mips/configs/rs90_defconfig
index 4f540bb94628..7ce3b814fdc8 100644
--- a/arch/mips/configs/rs90_defconfig
+++ b/arch/mips/configs/rs90_defconfig
@@ -30,7 +30,6 @@ CONFIG_PM=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPUFREQ_DT=y
-CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
 # CONFIG_STACKPROTECTOR is not set
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h
index 57e571128489..ca039b8dcde3 100644
--- a/arch/mips/include/asm/mach-loongson2ef/loongson.h
+++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h
@@ -56,15 +56,6 @@ extern int mach_i8259_irq(void);
 	(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
 
 #define LOONGSON_IRQ_BASE	32
-#define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
-
-#include <linux/interrupt.h>
-static inline void do_perfcnt_IRQ(void)
-{
-#if IS_ENABLED(CONFIG_OPROFILE)
-	do_IRQ(LOONGSON2_PERFCNT_IRQ);
-#endif
-}
 
 #define LOONGSON_FLASH_BASE	0x1c000000
 #define LOONGSON_FLASH_SIZE	0x02000000	/* 32M */
diff --git a/arch/mips/loongson2ef/fuloong-2e/irq.c b/arch/mips/loongson2ef/fuloong-2e/irq.c
index 305aa2eb74ad..b1c9d4ee0335 100644
--- a/arch/mips/loongson2ef/fuloong-2e/irq.c
+++ b/arch/mips/loongson2ef/fuloong-2e/irq.c
@@ -26,7 +26,7 @@ asmlinkage void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
-		do_perfcnt_IRQ();
+		return;
 	else if (pending & CAUSEF_IP5)
 		i8259_irqdispatch();
 	else if (pending & CAUSEF_IP2)
diff --git a/arch/mips/loongson2ef/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c
index 6f00579971a3..f5a731a2a35f 100644
--- a/arch/mips/loongson2ef/lemote-2f/irq.c
+++ b/arch/mips/loongson2ef/lemote-2f/irq.c
@@ -75,7 +75,6 @@ void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(LOONGSON_TIMER_IRQ);
 	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
-		do_perfcnt_IRQ();
 		bonito_irqdispatch();
 	} else if (pending & CAUSEF_IP3)	/* CPU UART */
 		do_IRQ(LOONGSON_UART_IRQ);
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
deleted file mode 100644
index e10f216d0422..000000000000
--- a/arch/mips/oprofile/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
-
-oprofile-$(CONFIG_CPU_MIPS32)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_MIPS64)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_R10000)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_SB1)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_XLR)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_LOONGSON2EF)	+= op_model_loongson2.o
-oprofile-$(CONFIG_CPU_LOONGSON64)	+= op_model_loongson3.o
diff --git a/arch/mips/oprofile/backtrace.c b/arch/mips/oprofile/backtrace.c
deleted file mode 100644
index 07d98ba7f49e..000000000000
--- a/arch/mips/oprofile/backtrace.c
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-#include <linux/stacktrace.h>
-#include <linux/kernel.h>
-#include <asm/sections.h>
-#include <asm/inst.h>
-
-struct stackframe {
-	unsigned long sp;
-	unsigned long pc;
-	unsigned long ra;
-};
-
-static inline int get_mem(unsigned long addr, unsigned long *result)
-{
-	unsigned long *address = (unsigned long *) addr;
-	if (!access_ok(address, sizeof(unsigned long)))
-		return -1;
-	if (__copy_from_user_inatomic(result, address, sizeof(unsigned long)))
-		return -3;
-	return 0;
-}
-
-/*
- * These two instruction helpers were taken from process.c
- */
-static inline int is_ra_save_ins(union mips_instruction *ip)
-{
-	/* sw / sd $ra, offset($sp) */
-	return (ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op)
-		&& ip->i_format.rs == 29 && ip->i_format.rt == 31;
-}
-
-static inline int is_sp_move_ins(union mips_instruction *ip)
-{
-	/* addiu/daddiu sp,sp,-imm */
-	if (ip->i_format.rs != 29 || ip->i_format.rt != 29)
-		return 0;
-	if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op)
-		return 1;
-	return 0;
-}
-
-/*
- * Looks for specific instructions that mark the end of a function.
- * This usually means we ran into the code area of the previous function.
- */
-static inline int is_end_of_function_marker(union mips_instruction *ip)
-{
-	/* jr ra */
-	if (ip->r_format.func == jr_op && ip->r_format.rs == 31)
-		return 1;
-	/* lui gp */
-	if (ip->i_format.opcode == lui_op && ip->i_format.rt == 28)
-		return 1;
-	return 0;
-}
-
-/*
- * TODO for userspace stack unwinding:
- * - handle cases where the stack is adjusted inside a function
- *     (generally doesn't happen)
- * - find optimal value for max_instr_check
- * - try to find a better way to handle leaf functions
- */
-
-static inline int unwind_user_frame(struct stackframe *old_frame,
-				    const unsigned int max_instr_check)
-{
-	struct stackframe new_frame = *old_frame;
-	off_t ra_offset = 0;
-	size_t stack_size = 0;
-	unsigned long addr;
-
-	if (old_frame->pc == 0 || old_frame->sp == 0 || old_frame->ra == 0)
-		return -9;
-
-	for (addr = new_frame.pc; (addr + max_instr_check > new_frame.pc)
-		&& (!ra_offset || !stack_size); --addr) {
-		union mips_instruction ip;
-
-		if (get_mem(addr, (unsigned long *) &ip))
-			return -11;
-
-		if (is_sp_move_ins(&ip)) {
-			int stack_adjustment = ip.i_format.simmediate;
-			if (stack_adjustment > 0)
-				/* This marks the end of the previous function,
-				   which means we overran. */
-				break;
-			stack_size = (unsigned long) stack_adjustment;
-		} else if (is_ra_save_ins(&ip)) {
-			int ra_slot = ip.i_format.simmediate;
-			if (ra_slot < 0)
-				/* This shouldn't happen. */
-				break;
-			ra_offset = ra_slot;
-		} else if (is_end_of_function_marker(&ip))
-			break;
-	}
-
-	if (!ra_offset || !stack_size)
-		goto done;
-
-	if (ra_offset) {
-		new_frame.ra = old_frame->sp + ra_offset;
-		if (get_mem(new_frame.ra, &(new_frame.ra)))
-			return -13;
-	}
-
-	if (stack_size) {
-		new_frame.sp = old_frame->sp + stack_size;
-		if (get_mem(new_frame.sp, &(new_frame.sp)))
-			return -14;
-	}
-
-	if (new_frame.sp > old_frame->sp)
-		return -2;
-
-done:
-	new_frame.pc = old_frame->ra;
-	*old_frame = new_frame;
-
-	return 0;
-}
-
-static inline void do_user_backtrace(unsigned long low_addr,
-				     struct stackframe *frame,
-				     unsigned int depth)
-{
-	const unsigned int max_instr_check = 512;
-	const unsigned long high_addr = low_addr + THREAD_SIZE;
-
-	while (depth-- && !unwind_user_frame(frame, max_instr_check)) {
-		oprofile_add_trace(frame->ra);
-		if (frame->sp < low_addr || frame->sp > high_addr)
-			break;
-	}
-}
-
-#ifndef CONFIG_KALLSYMS
-static inline void do_kernel_backtrace(unsigned long low_addr,
-				       struct stackframe *frame,
-				       unsigned int depth) { }
-#else
-static inline void do_kernel_backtrace(unsigned long low_addr,
-				       struct stackframe *frame,
-				       unsigned int depth)
-{
-	while (depth-- && frame->pc) {
-		frame->pc = unwind_stack_by_address(low_addr,
-						    &(frame->sp),
-						    frame->pc,
-						    &(frame->ra));
-		oprofile_add_trace(frame->ra);
-	}
-}
-#endif
-
-void notrace op_mips_backtrace(struct pt_regs *const regs, unsigned int depth)
-{
-	struct stackframe frame = { .sp = regs->regs[29],
-				    .pc = regs->cp0_epc,
-				    .ra = regs->regs[31] };
-	const int userspace = user_mode(regs);
-	const unsigned long low_addr = ALIGN(frame.sp, THREAD_SIZE);
-
-	if (userspace)
-		do_user_backtrace(low_addr, &frame, depth);
-	else
-		do_kernel_backtrace(low_addr, &frame, depth);
-}
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
deleted file mode 100644
index d3996c4c6440..000000000000
--- a/arch/mips/oprofile/common.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005 Ralf Baechle
- * Copyright (C) 2005 MIPS Technologies, Inc.
- */
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/cpu-info.h>
-#include <asm/cpu-type.h>
-
-#include "op_impl.h"
-
-extern struct op_mips_model op_model_mipsxx_ops __weak;
-extern struct op_mips_model op_model_loongson2_ops __weak;
-extern struct op_mips_model op_model_loongson3_ops __weak;
-
-static struct op_mips_model *model;
-
-static struct op_counter_config ctr[20];
-
-static int op_mips_setup(void)
-{
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(ctr);
-
-	/* Configure the registers on all cpus.	 */
-	on_each_cpu(model->cpu_setup, NULL, 1);
-
-	return 0;
-}
-
-static int op_mips_create_files(struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-
-		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
-		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(dir, "exl", &ctr[i].exl);
-		/* Dummy.  */
-		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	return 0;
-}
-
-static int op_mips_start(void)
-{
-	on_each_cpu(model->cpu_start, NULL, 1);
-
-	return 0;
-}
-
-static void op_mips_stop(void)
-{
-	/* Disable performance monitoring for all counters.  */
-	on_each_cpu(model->cpu_stop, NULL, 1);
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	struct op_mips_model *lmodel = NULL;
-	int res;
-
-	switch (boot_cpu_type()) {
-	case CPU_5KC:
-	case CPU_M14KC:
-	case CPU_M14KEC:
-	case CPU_20KC:
-	case CPU_24K:
-	case CPU_25KF:
-	case CPU_34K:
-	case CPU_1004K:
-	case CPU_74K:
-	case CPU_1074K:
-	case CPU_INTERAPTIV:
-	case CPU_PROAPTIV:
-	case CPU_P5600:
-	case CPU_I6400:
-	case CPU_M5150:
-	case CPU_LOONGSON32:
-	case CPU_SB1:
-	case CPU_SB1A:
-	case CPU_R10000:
-	case CPU_R12000:
-	case CPU_R14000:
-	case CPU_R16000:
-	case CPU_XLR:
-		lmodel = &op_model_mipsxx_ops;
-		break;
-
-	case CPU_LOONGSON2EF:
-		lmodel = &op_model_loongson2_ops;
-		break;
-	case CPU_LOONGSON64:
-		lmodel = &op_model_loongson3_ops;
-		break;
-	}
-
-	/*
-	 * Always set the backtrace. This allows unsupported CPU types to still
-	 * use timer-based oprofile.
-	 */
-	ops->backtrace = op_mips_backtrace;
-
-	if (!lmodel)
-		return -ENODEV;
-
-	res = lmodel->init();
-	if (res)
-		return res;
-
-	model = lmodel;
-
-	ops->create_files	= op_mips_create_files;
-	ops->setup		= op_mips_setup;
-	//ops->shutdown		= op_mips_shutdown;
-	ops->start		= op_mips_start;
-	ops->stop		= op_mips_stop;
-	ops->cpu_type		= lmodel->cpu_type;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       lmodel->cpu_type);
-
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-	if (model)
-		model->exit();
-}
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
deleted file mode 100644
index a4e758a39af4..000000000000
--- a/arch/mips/oprofile/op_impl.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_impl.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-extern int (*perf_irq)(void);
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Dummies because I am too lazy to hack the userspace tools.  */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long exl;
-	unsigned long unit_mask;
-};
-
-/* Per-architecture configure and hooks.  */
-struct op_mips_model {
-	void (*reg_setup) (struct op_counter_config *);
-	void (*cpu_setup) (void *dummy);
-	int (*init)(void);
-	void (*exit)(void);
-	void (*cpu_start)(void *args);
-	void (*cpu_stop)(void *args);
-	char *cpu_type;
-	unsigned char num_counters;
-};
-
-void op_mips_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
deleted file mode 100644
index b249ec0bebb2..000000000000
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Loongson2 performance counter driver for oprofile
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Yanhua <yanh@lemote.com>
- * Author: Wu Zhangjin <wuzhangjin@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-
-#include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
-#include "op_impl.h"
-
-#define LOONGSON2_CPU_TYPE	"mips/loongson2"
-
-#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL	<< 31)
-
-#define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
-#define LOONGSON2_PERFCTRL_KERNEL		(1UL	<<  1)
-#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL	<<  2)
-#define LOONGSON2_PERFCTRL_USER			(1UL	<<  3)
-#define LOONGSON2_PERFCTRL_ENABLE		(1UL	<<  4)
-#define LOONGSON2_PERFCTRL_EVENT(idx, event) \
-	(((event) & 0x0f) << ((idx) ? 9 : 5))
-
-#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
-#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
-#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
-#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
-
-static struct loongson2_register_config {
-	unsigned int ctrl;
-	unsigned long long reset_counter1;
-	unsigned long long reset_counter2;
-	int cnt1_enabled, cnt2_enabled;
-} reg;
-
-static char *oprofid = "LoongsonPerf";
-static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
-
-static void reset_counters(void *arg)
-{
-	write_c0_perfctrl(0);
-	write_c0_perfcnt(0);
-}
-
-static void loongson2_reg_setup(struct op_counter_config *cfg)
-{
-	unsigned int ctrl = 0;
-
-	reg.reset_counter1 = 0;
-	reg.reset_counter2 = 0;
-
-	/*
-	 * Compute the performance counter ctrl word.
-	 * For now, count kernel and user mode.
-	 */
-	if (cfg[0].enabled) {
-		ctrl |= LOONGSON2_PERFCTRL_EVENT(0, cfg[0].event);
-		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
-	}
-
-	if (cfg[1].enabled) {
-		ctrl |= LOONGSON2_PERFCTRL_EVENT(1, cfg[1].event);
-		reg.reset_counter2 = 0x80000000ULL - cfg[1].count;
-	}
-
-	if (cfg[0].enabled || cfg[1].enabled) {
-		ctrl |= LOONGSON2_PERFCTRL_EXL | LOONGSON2_PERFCTRL_ENABLE;
-		if (cfg[0].kernel || cfg[1].kernel)
-			ctrl |= LOONGSON2_PERFCTRL_KERNEL;
-		if (cfg[0].user || cfg[1].user)
-			ctrl |= LOONGSON2_PERFCTRL_USER;
-	}
-
-	reg.ctrl = ctrl;
-
-	reg.cnt1_enabled = cfg[0].enabled;
-	reg.cnt2_enabled = cfg[1].enabled;
-}
-
-static void loongson2_cpu_setup(void *args)
-{
-	write_c0_perfcnt((reg.reset_counter2 << 32) | reg.reset_counter1);
-}
-
-static void loongson2_cpu_start(void *args)
-{
-	/* Start all counters on current CPU */
-	if (reg.cnt1_enabled || reg.cnt2_enabled)
-		write_c0_perfctrl(reg.ctrl);
-}
-
-static void loongson2_cpu_stop(void *args)
-{
-	/* Stop all counters on current CPU */
-	write_c0_perfctrl(0);
-	memset(&reg, 0, sizeof(reg));
-}
-
-static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
-{
-	uint64_t counter, counter1, counter2;
-	struct pt_regs *regs = get_irq_regs();
-	int enabled;
-
-	/* Check whether the irq belongs to me */
-	enabled = read_c0_perfctrl() & LOONGSON2_PERFCTRL_ENABLE;
-	if (!enabled)
-		return IRQ_NONE;
-	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
-	if (!enabled)
-		return IRQ_NONE;
-
-	counter = read_c0_perfcnt();
-	counter1 = counter & 0xffffffff;
-	counter2 = counter >> 32;
-
-	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt1_enabled)
-			oprofile_add_sample(regs, 0);
-		counter1 = reg.reset_counter1;
-	}
-	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt2_enabled)
-			oprofile_add_sample(regs, 1);
-		counter2 = reg.reset_counter2;
-	}
-
-	write_c0_perfcnt((counter2 << 32) | counter1);
-
-	return IRQ_HANDLED;
-}
-
-static int __init loongson2_init(void)
-{
-	return request_irq(LOONGSON2_PERFCNT_IRQ, loongson2_perfcount_handler,
-			   IRQF_SHARED, "Perfcounter", oprofid);
-}
-
-static void loongson2_exit(void)
-{
-	reset_counters(NULL);
-	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
-}
-
-struct op_mips_model op_model_loongson2_ops = {
-	.reg_setup = loongson2_reg_setup,
-	.cpu_setup = loongson2_cpu_setup,
-	.init = loongson2_init,
-	.exit = loongson2_exit,
-	.cpu_start = loongson2_cpu_start,
-	.cpu_stop = loongson2_cpu_stop,
-	.cpu_type = LOONGSON2_CPU_TYPE,
-	.num_counters = 2
-};
diff --git a/arch/mips/oprofile/op_model_loongson3.c b/arch/mips/oprofile/op_model_loongson3.c
deleted file mode 100644
index 436b1fc99f2c..000000000000
--- a/arch/mips/oprofile/op_model_loongson3.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/proc_fs.h>
-#include <linux/oprofile.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <irq.h>
-#include <loongson.h>
-#include "op_impl.h"
-
-#define LOONGSON3_PERFCNT_OVERFLOW	(1ULL << 63)
-
-#define LOONGSON3_PERFCTRL_EXL		(1UL << 0)
-#define LOONGSON3_PERFCTRL_KERNEL	(1UL << 1)
-#define LOONGSON3_PERFCTRL_SUPERVISOR	(1UL << 2)
-#define LOONGSON3_PERFCTRL_USER		(1UL << 3)
-#define LOONGSON3_PERFCTRL_ENABLE	(1UL << 4)
-#define LOONGSON3_PERFCTRL_W		(1UL << 30)
-#define LOONGSON3_PERFCTRL_M		(1UL << 31)
-#define LOONGSON3_PERFCTRL_EVENT(idx, event) \
-	(((event) & (idx ? 0x0f : 0x3f)) << 5)
-
-/* Loongson-3 PerfCount performance counter1 register */
-#define read_c0_perflo1() __read_64bit_c0_register($25, 0)
-#define write_c0_perflo1(val) __write_64bit_c0_register($25, 0, val)
-#define read_c0_perfhi1() __read_64bit_c0_register($25, 1)
-#define write_c0_perfhi1(val) __write_64bit_c0_register($25, 1, val)
-
-/* Loongson-3 PerfCount performance counter2 register */
-#define read_c0_perflo2() __read_64bit_c0_register($25, 2)
-#define write_c0_perflo2(val) __write_64bit_c0_register($25, 2, val)
-#define read_c0_perfhi2() __read_64bit_c0_register($25, 3)
-#define write_c0_perfhi2(val) __write_64bit_c0_register($25, 3, val)
-
-static int (*save_perf_irq)(void);
-
-static struct loongson3_register_config {
-	unsigned int control1;
-	unsigned int control2;
-	unsigned long long reset_counter1;
-	unsigned long long reset_counter2;
-	int ctr1_enable, ctr2_enable;
-} reg;
-
-static void reset_counters(void *arg)
-{
-	write_c0_perfhi1(0);
-	write_c0_perfhi2(0);
-	write_c0_perflo1(0xc0000000);
-	write_c0_perflo2(0x40000000);
-}
-
-/* Compute all of the registers in preparation for enabling profiling. */
-static void loongson3_reg_setup(struct op_counter_config *ctr)
-{
-	unsigned int control1 = 0;
-	unsigned int control2 = 0;
-
-	reg.reset_counter1 = 0;
-	reg.reset_counter2 = 0;
-	/* Compute the performance counter control word. */
-	/* For now count kernel and user mode */
-	if (ctr[0].enabled) {
-		control1 |= LOONGSON3_PERFCTRL_EVENT(0, ctr[0].event) |
-					LOONGSON3_PERFCTRL_ENABLE;
-		if (ctr[0].kernel)
-			control1 |= LOONGSON3_PERFCTRL_KERNEL;
-		if (ctr[0].user)
-			control1 |= LOONGSON3_PERFCTRL_USER;
-		reg.reset_counter1 = 0x8000000000000000ULL - ctr[0].count;
-	}
-
-	if (ctr[1].enabled) {
-		control2 |= LOONGSON3_PERFCTRL_EVENT(1, ctr[1].event) |
-					LOONGSON3_PERFCTRL_ENABLE;
-		if (ctr[1].kernel)
-			control2 |= LOONGSON3_PERFCTRL_KERNEL;
-		if (ctr[1].user)
-			control2 |= LOONGSON3_PERFCTRL_USER;
-		reg.reset_counter2 = 0x8000000000000000ULL - ctr[1].count;
-	}
-
-	if (ctr[0].enabled)
-		control1 |= LOONGSON3_PERFCTRL_EXL;
-	if (ctr[1].enabled)
-		control2 |= LOONGSON3_PERFCTRL_EXL;
-
-	reg.control1 = control1;
-	reg.control2 = control2;
-	reg.ctr1_enable = ctr[0].enabled;
-	reg.ctr2_enable = ctr[1].enabled;
-}
-
-/* Program all of the registers in preparation for enabling profiling. */
-static void loongson3_cpu_setup(void *args)
-{
-	uint64_t perfcount1, perfcount2;
-
-	perfcount1 = reg.reset_counter1;
-	perfcount2 = reg.reset_counter2;
-	write_c0_perfhi1(perfcount1);
-	write_c0_perfhi2(perfcount2);
-}
-
-static void loongson3_cpu_start(void *args)
-{
-	/* Start all counters on current CPU */
-	reg.control1 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
-	reg.control2 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
-
-	if (reg.ctr1_enable)
-		write_c0_perflo1(reg.control1);
-	if (reg.ctr2_enable)
-		write_c0_perflo2(reg.control2);
-}
-
-static void loongson3_cpu_stop(void *args)
-{
-	/* Stop all counters on current CPU */
-	write_c0_perflo1(0xc0000000);
-	write_c0_perflo2(0x40000000);
-	memset(&reg, 0, sizeof(reg));
-}
-
-static int loongson3_perfcount_handler(void)
-{
-	unsigned long flags;
-	uint64_t counter1, counter2;
-	uint32_t cause, handled = IRQ_NONE;
-	struct pt_regs *regs = get_irq_regs();
-
-	cause = read_c0_cause();
-	if (!(cause & CAUSEF_PCI))
-		return handled;
-
-	counter1 = read_c0_perfhi1();
-	counter2 = read_c0_perfhi2();
-
-	local_irq_save(flags);
-
-	if (counter1 & LOONGSON3_PERFCNT_OVERFLOW) {
-		if (reg.ctr1_enable)
-			oprofile_add_sample(regs, 0);
-		counter1 = reg.reset_counter1;
-	}
-	if (counter2 & LOONGSON3_PERFCNT_OVERFLOW) {
-		if (reg.ctr2_enable)
-			oprofile_add_sample(regs, 1);
-		counter2 = reg.reset_counter2;
-	}
-
-	local_irq_restore(flags);
-
-	write_c0_perfhi1(counter1);
-	write_c0_perfhi2(counter2);
-
-	if (!(cause & CAUSEF_TI))
-		handled = IRQ_HANDLED;
-
-	return handled;
-}
-
-static int loongson3_starting_cpu(unsigned int cpu)
-{
-	write_c0_perflo1(reg.control1);
-	write_c0_perflo2(reg.control2);
-	return 0;
-}
-
-static int loongson3_dying_cpu(unsigned int cpu)
-{
-	write_c0_perflo1(0xc0000000);
-	write_c0_perflo2(0x40000000);
-	return 0;
-}
-
-static int __init loongson3_init(void)
-{
-	on_each_cpu(reset_counters, NULL, 1);
-	cpuhp_setup_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING,
-				  "mips/oprofile/loongson3:starting",
-				  loongson3_starting_cpu, loongson3_dying_cpu);
-	save_perf_irq = perf_irq;
-	perf_irq = loongson3_perfcount_handler;
-
-	return 0;
-}
-
-static void loongson3_exit(void)
-{
-	on_each_cpu(reset_counters, NULL, 1);
-	cpuhp_remove_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING);
-	perf_irq = save_perf_irq;
-}
-
-struct op_mips_model op_model_loongson3_ops = {
-	.reg_setup	= loongson3_reg_setup,
-	.cpu_setup	= loongson3_cpu_setup,
-	.init		= loongson3_init,
-	.exit		= loongson3_exit,
-	.cpu_start	= loongson3_cpu_start,
-	.cpu_stop	= loongson3_cpu_stop,
-	.cpu_type	= "mips/loongson3",
-	.num_counters	= 2
-};
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
deleted file mode 100644
index 55d7b7fd18b6..000000000000
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 05, 06 by Ralf Baechle
- * Copyright (C) 2005 by MIPS Technologies, Inc.
- */
-#include <linux/cpumask.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <asm/irq_regs.h>
-#include <asm/time.h>
-
-#include "op_impl.h"
-
-#define M_PERFCTL_EVENT(event)		(((event) << MIPS_PERFCTRL_EVENT_S) & \
-					 MIPS_PERFCTRL_EVENT)
-#define M_PERFCTL_VPEID(vpe)		((vpe)	  << MIPS_PERFCTRL_VPEID_S)
-
-#define M_COUNTER_OVERFLOW		(1UL	  << 31)
-
-static int (*save_perf_irq)(void);
-static int perfcount_irq;
-
-/*
- * XLR has only one set of counters per core. Designate the
- * first hardware thread in the core for setup and init.
- * Skip CPUs with non-zero hardware thread id (4 hwt per core)
- */
-#if defined(CONFIG_CPU_XLR) && defined(CONFIG_SMP)
-#define oprofile_skip_cpu(c)	((cpu_logical_map(c) & 0x3) != 0)
-#else
-#define oprofile_skip_cpu(c)	0
-#endif
-
-#ifdef CONFIG_MIPS_MT_SMP
-#define WHAT		(MIPS_PERFCTRL_MT_EN_VPE | \
-			 M_PERFCTL_VPEID(cpu_vpe_id(&current_cpu_data)))
-#define vpe_id()	(cpu_has_mipsmt_pertccounters ? \
-			0 : cpu_vpe_id(&current_cpu_data))
-
-/*
- * The number of bits to shift to convert between counters per core and
- * counters per VPE.  There is no reasonable interface atm to obtain the
- * number of VPEs used by Linux and in the 34K this number is fixed to two
- * anyways so we hardcore a few things here for the moment.  The way it's
- * done here will ensure that oprofile VSMP kernel will run right on a lesser
- * core like a 24K also or with maxcpus=1.
- */
-static inline unsigned int vpe_shift(void)
-{
-	if (num_possible_cpus() > 1)
-		return 1;
-
-	return 0;
-}
-
-#else
-
-#define WHAT		0
-#define vpe_id()	0
-
-static inline unsigned int vpe_shift(void)
-{
-	return 0;
-}
-
-#endif
-
-static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
-{
-	return counters >> vpe_shift();
-}
-
-static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
-	return counters << vpe_shift();
-}
-
-#define __define_perf_accessors(r, n, np)				\
-									\
-static inline unsigned int r_c0_ ## r ## n(void)			\
-{									\
-	unsigned int cpu = vpe_id();					\
-									\
-	switch (cpu) {							\
-	case 0:								\
-		return read_c0_ ## r ## n();				\
-	case 1:								\
-		return read_c0_ ## r ## np();				\
-	default:							\
-		BUG();							\
-	}								\
-	return 0;							\
-}									\
-									\
-static inline void w_c0_ ## r ## n(unsigned int value)			\
-{									\
-	unsigned int cpu = vpe_id();					\
-									\
-	switch (cpu) {							\
-	case 0:								\
-		write_c0_ ## r ## n(value);				\
-		return;							\
-	case 1:								\
-		write_c0_ ## r ## np(value);				\
-		return;							\
-	default:							\
-		BUG();							\
-	}								\
-	return;								\
-}									\
-
-__define_perf_accessors(perfcntr, 0, 2)
-__define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 0)
-__define_perf_accessors(perfcntr, 3, 1)
-
-__define_perf_accessors(perfctrl, 0, 2)
-__define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 0)
-__define_perf_accessors(perfctrl, 3, 1)
-
-struct op_mips_model op_model_mipsxx_ops;
-
-static struct mipsxx_register_config {
-	unsigned int control[4];
-	unsigned int counter[4];
-} reg;
-
-/* Compute all of the registers in preparation for enabling profiling.	*/
-
-static void mipsxx_reg_setup(struct op_counter_config *ctr)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-	int i;
-
-	/* Compute the performance counter control word.  */
-	for (i = 0; i < counters; i++) {
-		reg.control[i] = 0;
-		reg.counter[i] = 0;
-
-		if (!ctr[i].enabled)
-			continue;
-
-		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
-				 MIPS_PERFCTRL_IE;
-		if (ctr[i].kernel)
-			reg.control[i] |= MIPS_PERFCTRL_K;
-		if (ctr[i].user)
-			reg.control[i] |= MIPS_PERFCTRL_U;
-		if (ctr[i].exl)
-			reg.control[i] |= MIPS_PERFCTRL_EXL;
-		if (boot_cpu_type() == CPU_XLR)
-			reg.control[i] |= XLR_PERFCTRL_ALLTHREADS;
-		reg.counter[i] = 0x80000000 - ctr[i].count;
-	}
-}
-
-/* Program all of the registers in preparation for enabling profiling.	*/
-
-static void mipsxx_cpu_setup(void *args)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-
-	if (oprofile_skip_cpu(smp_processor_id()))
-		return;
-
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(0);
-		w_c0_perfcntr3(reg.counter[3]);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(0);
-		w_c0_perfcntr2(reg.counter[2]);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(0);
-		w_c0_perfcntr1(reg.counter[1]);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(0);
-		w_c0_perfcntr0(reg.counter[0]);
-	}
-}
-
-/* Start all counters on current CPU */
-static void mipsxx_cpu_start(void *args)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-
-	if (oprofile_skip_cpu(smp_processor_id()))
-		return;
-
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(WHAT | reg.control[3]);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(WHAT | reg.control[2]);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(WHAT | reg.control[1]);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(WHAT | reg.control[0]);
-	}
-}
-
-/* Stop all counters on current CPU */
-static void mipsxx_cpu_stop(void *args)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-
-	if (oprofile_skip_cpu(smp_processor_id()))
-		return;
-
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(0);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(0);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(0);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(0);
-	}
-}
-
-static int mipsxx_perfcount_handler(void)
-{
-	unsigned int counters = op_model_mipsxx_ops.num_counters;
-	unsigned int control;
-	unsigned int counter;
-	int handled = IRQ_NONE;
-
-	if (cpu_has_mips_r2 && !(read_c0_cause() & CAUSEF_PCI))
-		return handled;
-
-	switch (counters) {
-#define HANDLE_COUNTER(n)						\
-	case n + 1:							\
-		control = r_c0_perfctrl ## n();				\
-		counter = r_c0_perfcntr ## n();				\
-		if ((control & MIPS_PERFCTRL_IE) &&			\
-		    (counter & M_COUNTER_OVERFLOW)) {			\
-			oprofile_add_sample(get_irq_regs(), n);		\
-			w_c0_perfcntr ## n(reg.counter[n]);		\
-			handled = IRQ_HANDLED;				\
-		}
-	HANDLE_COUNTER(3)
-	fallthrough;
-	HANDLE_COUNTER(2)
-	fallthrough;
-	HANDLE_COUNTER(1)
-	fallthrough;
-	HANDLE_COUNTER(0)
-	}
-
-	return handled;
-}
-
-static inline int __n_counters(void)
-{
-	if (!cpu_has_perf)
-		return 0;
-	if (!(read_c0_perfctrl0() & MIPS_PERFCTRL_M))
-		return 1;
-	if (!(read_c0_perfctrl1() & MIPS_PERFCTRL_M))
-		return 2;
-	if (!(read_c0_perfctrl2() & MIPS_PERFCTRL_M))
-		return 3;
-
-	return 4;
-}
-
-static inline int n_counters(void)
-{
-	int counters;
-
-	switch (current_cpu_type()) {
-	case CPU_R10000:
-		counters = 2;
-		break;
-
-	case CPU_R12000:
-	case CPU_R14000:
-	case CPU_R16000:
-		counters = 4;
-		break;
-
-	default:
-		counters = __n_counters();
-	}
-
-	return counters;
-}
-
-static void reset_counters(void *arg)
-{
-	int counters = (int)(long)arg;
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(0);
-		w_c0_perfcntr3(0);
-		fallthrough;
-	case 3:
-		w_c0_perfctrl2(0);
-		w_c0_perfcntr2(0);
-		fallthrough;
-	case 2:
-		w_c0_perfctrl1(0);
-		w_c0_perfcntr1(0);
-		fallthrough;
-	case 1:
-		w_c0_perfctrl0(0);
-		w_c0_perfcntr0(0);
-	}
-}
-
-static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
-{
-	return mipsxx_perfcount_handler();
-}
-
-static int __init mipsxx_init(void)
-{
-	int counters;
-
-	counters = n_counters();
-	if (counters == 0) {
-		printk(KERN_ERR "Oprofile: CPU has no performance counters\n");
-		return -ENODEV;
-	}
-
-#ifdef CONFIG_MIPS_MT_SMP
-	if (!cpu_has_mipsmt_pertccounters)
-		counters = counters_total_to_per_cpu(counters);
-#endif
-	on_each_cpu(reset_counters, (void *)(long)counters, 1);
-
-	op_model_mipsxx_ops.num_counters = counters;
-	switch (current_cpu_type()) {
-	case CPU_M14KC:
-		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
-		break;
-
-	case CPU_M14KEC:
-		op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
-		break;
-
-	case CPU_20KC:
-		op_model_mipsxx_ops.cpu_type = "mips/20K";
-		break;
-
-	case CPU_24K:
-		op_model_mipsxx_ops.cpu_type = "mips/24K";
-		break;
-
-	case CPU_25KF:
-		op_model_mipsxx_ops.cpu_type = "mips/25K";
-		break;
-
-	case CPU_1004K:
-	case CPU_34K:
-		op_model_mipsxx_ops.cpu_type = "mips/34K";
-		break;
-
-	case CPU_1074K:
-	case CPU_74K:
-		op_model_mipsxx_ops.cpu_type = "mips/74K";
-		break;
-
-	case CPU_INTERAPTIV:
-		op_model_mipsxx_ops.cpu_type = "mips/interAptiv";
-		break;
-
-	case CPU_PROAPTIV:
-		op_model_mipsxx_ops.cpu_type = "mips/proAptiv";
-		break;
-
-	case CPU_P5600:
-		op_model_mipsxx_ops.cpu_type = "mips/P5600";
-		break;
-
-	case CPU_I6400:
-		op_model_mipsxx_ops.cpu_type = "mips/I6400";
-		break;
-
-	case CPU_M5150:
-		op_model_mipsxx_ops.cpu_type = "mips/M5150";
-		break;
-
-	case CPU_5KC:
-		op_model_mipsxx_ops.cpu_type = "mips/5K";
-		break;
-
-	case CPU_R10000:
-		if ((current_cpu_data.processor_id & 0xff) == 0x20)
-			op_model_mipsxx_ops.cpu_type = "mips/r10000-v2.x";
-		else
-			op_model_mipsxx_ops.cpu_type = "mips/r10000";
-		break;
-
-	case CPU_R12000:
-	case CPU_R14000:
-		op_model_mipsxx_ops.cpu_type = "mips/r12000";
-		break;
-
-	case CPU_R16000:
-		op_model_mipsxx_ops.cpu_type = "mips/r16000";
-		break;
-
-	case CPU_SB1:
-	case CPU_SB1A:
-		op_model_mipsxx_ops.cpu_type = "mips/sb1";
-		break;
-
-	case CPU_LOONGSON32:
-		op_model_mipsxx_ops.cpu_type = "mips/loongson1";
-		break;
-
-	case CPU_XLR:
-		op_model_mipsxx_ops.cpu_type = "mips/xlr";
-		break;
-
-	default:
-		printk(KERN_ERR "Profiling unsupported for this CPU\n");
-
-		return -ENODEV;
-	}
-
-	save_perf_irq = perf_irq;
-	perf_irq = mipsxx_perfcount_handler;
-
-	if (get_c0_perfcount_int)
-		perfcount_irq = get_c0_perfcount_int();
-	else if (cp0_perfcount_irq >= 0)
-		perfcount_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
-	else
-		perfcount_irq = -1;
-
-	if (perfcount_irq >= 0)
-		return request_irq(perfcount_irq, mipsxx_perfcount_int,
-				   IRQF_PERCPU | IRQF_NOBALANCING |
-				   IRQF_NO_THREAD | IRQF_NO_SUSPEND |
-				   IRQF_SHARED,
-				   "Perfcounter", save_perf_irq);
-
-	return 0;
-}
-
-static void mipsxx_exit(void)
-{
-	int counters = op_model_mipsxx_ops.num_counters;
-
-	if (perfcount_irq >= 0)
-		free_irq(perfcount_irq, save_perf_irq);
-
-	counters = counters_per_cpu_to_total(counters);
-	on_each_cpu(reset_counters, (void *)(long)counters, 1);
-
-	perf_irq = save_perf_irq;
-}
-
-struct op_mips_model op_model_mipsxx_ops = {
-	.reg_setup	= mipsxx_reg_setup,
-	.cpu_setup	= mipsxx_cpu_setup,
-	.init		= mipsxx_init,
-	.exit		= mipsxx_exit,
-	.cpu_start	= mipsxx_cpu_start,
-	.cpu_stop	= mipsxx_cpu_stop,
-};
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b09d6923f156..e7f611c2719d 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -4,7 +4,6 @@ config PARISC
 	select ARCH_32BIT_OFF_T if !64BIT
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_IDE
-	select HAVE_OPROFILE
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_SYSCALL_TRACEPOINTS
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 5140c602207f..7d9f71aa829a 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -116,8 +116,6 @@ kernel-y			:= mm/ kernel/ math-emu/
 core-y	+= $(addprefix arch/parisc/, $(kernel-y))
 libs-y	+= arch/parisc/lib/ $(LIBGCC)
 
-drivers-$(CONFIG_OPROFILE)		+= arch/parisc/oprofile/
-
 boot	:= arch/parisc/boot
 
 PALO := $(shell if (which palo 2>&1); then : ; \
diff --git a/arch/parisc/oprofile/Makefile b/arch/parisc/oprofile/Makefile
deleted file mode 100644
index 86a1ccc328eb..000000000000
--- a/arch/parisc/oprofile/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) init.o
diff --git a/arch/parisc/oprofile/init.c b/arch/parisc/oprofile/init.c
deleted file mode 100644
index 026cba2af07a..000000000000
--- a/arch/parisc/oprofile/init.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/oprofile.h>
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	return -ENODEV;
-}
-
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d26a89cd8908..9141f03060ce 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -226,7 +226,6 @@ config PPC
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if (PPC64 && PPC_BOOK3S)
-	select HAVE_OPROFILE
 	select HAVE_OPTPROBES			if PPC64
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI		if PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 08cf0eade56a..b959fdaec713 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -276,8 +276,6 @@ head-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE)  += arch/powerpc/kernel/prom_init.o
 # See arch/powerpc/Kbuild for content of core part of the kernel
 core-y += arch/powerpc/
 
-drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
-
 # Default to zImage, override when needed
 all: zImage
 
diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig
index 3894ba8f8ffc..72b8f93a9bdd 100644
--- a/arch/powerpc/configs/44x/akebono_defconfig
+++ b/arch/powerpc/configs/44x/akebono_defconfig
@@ -8,7 +8,6 @@ CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_SLUB_CPU_PARTIAL is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig
index 34c86b3abecb..717827219921 100644
--- a/arch/powerpc/configs/44x/currituck_defconfig
+++ b/arch/powerpc/configs/44x/currituck_defconfig
@@ -6,7 +6,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/44x/fsp2_defconfig b/arch/powerpc/configs/44x/fsp2_defconfig
index 30845ce0885a..8da316e61a08 100644
--- a/arch/powerpc/configs/44x/fsp2_defconfig
+++ b/arch/powerpc/configs/44x/fsp2_defconfig
@@ -17,7 +17,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index 2c3834eebca3..c11e777b2f3d 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -7,7 +7,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 42fbc70cec33..cc2c0d51f493 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -14,7 +14,6 @@ CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 1de0dbf6cbba..63d611cc160f 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -12,7 +12,6 @@ CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 161351a18517..9424c1e67e1c 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -9,7 +9,6 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 15ed8d0aa014..78606b7e42df 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -7,7 +7,6 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 665a8d7cded0..7aefac5afab0 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -10,7 +10,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index 60a30fffeda0..2c87e856d839 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -30,7 +30,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 48759656a067..4f05a6652478 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -62,7 +62,6 @@ CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m
 CONFIG_VHOST_NET=m
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 33a01a9e86be..5cf49a515f8e 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -14,7 +14,6 @@ CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index ef09f3cce1fa..10c055eaebf0 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -19,7 +19,6 @@ CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 142f1321fa58..f300dcb937cc 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -13,7 +13,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_PPC_POWERNV is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index d5dece981c02..777221775c83 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -29,7 +29,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 5f21a5bab467..e85c849214a2 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -17,16 +17,6 @@ struct cpu_spec;
 typedef	void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
 typedef	void (*cpu_restore_t)(void);
 
-enum powerpc_oprofile_type {
-	PPC_OPROFILE_INVALID = 0,
-	PPC_OPROFILE_RS64 = 1,
-	PPC_OPROFILE_POWER4 = 2,
-	PPC_OPROFILE_G4 = 3,
-	PPC_OPROFILE_FSL_EMB = 4,
-	PPC_OPROFILE_CELL = 5,
-	PPC_OPROFILE_PA6T = 6,
-};
-
 enum powerpc_pmc_type {
 	PPC_PMC_DEFAULT = 0,
 	PPC_PMC_IBM = 1,
@@ -83,16 +73,6 @@ struct cpu_spec {
 	/* Used by oprofile userspace to select the right counters */
 	char		*oprofile_cpu_type;
 
-	/* Processor specific oprofile operations */
-	enum powerpc_oprofile_type oprofile_type;
-
-	/* Bit locations inside the mmcra change */
-	unsigned long	oprofile_mmcra_sihv;
-	unsigned long	oprofile_mmcra_sipr;
-
-	/* Bits to clear during an oprofile exception */
-	unsigned long	oprofile_mmcra_clear;
-
 	/* Name of processor class, for the ELF AT_PLATFORM entry */
 	char		*platform;
 
diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
deleted file mode 100644
index 2a166c297f97..000000000000
--- a/arch/powerpc/include/asm/oprofile_impl.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- */
-
-#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
-#define _ASM_POWERPC_OPROFILE_IMPL_H
-#ifdef __KERNEL__
-
-#define OP_MAX_COUNTER 8
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Classic doesn't support per-counter user/kernel selection */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-#ifdef CONFIG_PPC64
-	unsigned long mmcr0;
-	unsigned long mmcr1;
-	unsigned long mmcra;
-#ifdef CONFIG_OPROFILE_CELL
-	/* Register for oprofile user tool to check cell kernel profiling
-	 * support.
-	 */
-	unsigned long cell_support;
-#endif
-#endif
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Per-arch configuration */
-struct op_powerpc_model {
-	int (*reg_setup) (struct op_counter_config *,
-			   struct op_system_config *,
-			   int num_counters);
-	int  (*cpu_setup) (struct op_counter_config *);
-	int  (*start) (struct op_counter_config *);
-	int  (*global_start) (struct op_counter_config *);
-	void (*stop) (void);
-	void (*global_stop) (void);
-	int (*sync_start)(void);
-	int (*sync_stop)(void);
-	void (*handle_interrupt) (struct pt_regs *,
-				  struct op_counter_config *);
-	int num_counters;
-};
-
-extern struct op_powerpc_model op_model_fsl_emb;
-extern struct op_powerpc_model op_model_power4;
-extern struct op_powerpc_model op_model_7450;
-extern struct op_powerpc_model op_model_cell;
-extern struct op_powerpc_model op_model_pa6t;
-
-
-/* All the classic PPC parts use these */
-static inline unsigned int classic_ctr_read(unsigned int i)
-{
-	switch(i) {
-	case 0:
-		return mfspr(SPRN_PMC1);
-	case 1:
-		return mfspr(SPRN_PMC2);
-	case 2:
-		return mfspr(SPRN_PMC3);
-	case 3:
-		return mfspr(SPRN_PMC4);
-	case 4:
-		return mfspr(SPRN_PMC5);
-	case 5:
-		return mfspr(SPRN_PMC6);
-
-/* No PPC32 chip has more than 6 so far */
-#ifdef CONFIG_PPC64
-	case 6:
-		return mfspr(SPRN_PMC7);
-	case 7:
-		return mfspr(SPRN_PMC8);
-#endif
-	default:
-		return 0;
-	}
-}
-
-static inline void classic_ctr_write(unsigned int i, unsigned int val)
-{
-	switch(i) {
-	case 0:
-		mtspr(SPRN_PMC1, val);
-		break;
-	case 1:
-		mtspr(SPRN_PMC2, val);
-		break;
-	case 2:
-		mtspr(SPRN_PMC3, val);
-		break;
-	case 3:
-		mtspr(SPRN_PMC4, val);
-		break;
-	case 4:
-		mtspr(SPRN_PMC5, val);
-		break;
-	case 5:
-		mtspr(SPRN_PMC6, val);
-		break;
-
-/* No PPC32 chip has more than 6, yet */
-#ifdef CONFIG_PPC64
-	case 6:
-		mtspr(SPRN_PMC7, val);
-		break;
-	case 7:
-		mtspr(SPRN_PMC8, val);
-		break;
-#endif
-	default:
-		break;
-	}
-}
-
-
-extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
index 9666491bcb8a..8a2d11ba0dae 100644
--- a/arch/powerpc/include/asm/spu.h
+++ b/arch/powerpc/include/asm/spu.h
@@ -201,20 +201,6 @@ int spu_64k_pages_available(void);
 struct mm_struct;
 extern void spu_flush_all_slbs(struct mm_struct *mm);
 
-/* This interface allows a profiler (e.g., OProfile) to store a ref
- * to spu context information that it creates.	This caching technique
- * avoids the need to recreate this information after a save/restore operation.
- *
- * Assumes the caller has already incremented the ref count to
- * profile_info; then spu_context_destroy must call kref_put
- * on prof_info_kref.
- */
-void spu_set_profile_private_kref(struct spu_context *ctx,
-				  struct kref *prof_info_kref,
-				  void ( * prof_info_release) (struct kref *kref));
-
-void *spu_get_profile_private_kref(struct spu_context *ctx);
-
 /* system callbacks from the SPU */
 struct spu_syscall_block {
 	u64 nr_ret;
@@ -266,25 +252,6 @@ void spu_remove_dev_attr(struct device_attribute *attr);
 int spu_add_dev_attr_group(struct attribute_group *attrs);
 void spu_remove_dev_attr_group(struct attribute_group *attrs);
 
-/*
- * Notifier blocks:
- *
- * oprofile can get notified when a context switch is performed
- * on an spe. The notifer function that gets called is passed
- * a pointer to the SPU structure as well as the object-id that
- * identifies the binary running on that SPU now.
- *
- * For a context save, the object-id that is passed is zero,
- * identifying that the kernel will run from that moment on.
- *
- * For a context restore, the object-id is the value written
- * to object-id spufs file from user space and the notifer
- * function can assume that spu->ctx is valid.
- */
-struct notifier_block;
-int spu_switch_event_register(struct notifier_block * n);
-int spu_switch_event_unregister(struct notifier_block * n);
-
 extern void notify_spus_active(void);
 extern void do_notify_spus_active(void);
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 65f35ec052d4..ae0fdef0ac11 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -13,7 +13,6 @@
 #include <linux/export.h>
 #include <linux/jump_label.h>
 
-#include <asm/oprofile_impl.h>
 #include <asm/cputable.h>
 #include <asm/prom.h>		/* for PTRRELOC on ARCH=ppc */
 #include <asm/mce.h>
@@ -151,7 +150,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970FX */
@@ -169,7 +167,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970MP DD1.0 - no DEEPNAP, use regular 970 init */
@@ -187,7 +184,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970MP",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970MP */
@@ -205,7 +201,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970MP,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970MP",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970GX */
@@ -222,7 +217,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* Power5 GR */
@@ -237,12 +231,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power5",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		/* SIHV / SIPR bits are implemented on POWER4+ (GQ)
-		 * and above but only works on POWER5 and above
-		 */
-		.oprofile_mmcra_sihv	= MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5",
 	},
 	{	/* Power5++ */
@@ -256,9 +244,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc64/power5++",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		.oprofile_mmcra_sihv	= MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5+",
 	},
 	{	/* Power5 GS */
@@ -273,9 +258,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power5+",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		.oprofile_mmcra_sihv	= MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5+",
 	},
 	{	/* POWER6 in P5+ mode; 2.04-compliant processor */
@@ -288,7 +270,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -304,11 +285,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power6",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= POWER6_MMCRA_SIPR,
-		.oprofile_mmcra_clear	= POWER6_MMCRA_THRM |
-			POWER6_MMCRA_OTHER,
 		.platform		= "power6x",
 	},
 	{	/* 2.05-compliant processor, i.e. Power6 "architected" mode */
@@ -321,7 +297,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power6",
 	},
 	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
@@ -334,7 +309,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power7,
 		.cpu_restore		= __restore_cpu_power7,
@@ -351,7 +325,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER8,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
@@ -368,7 +341,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER9,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
@@ -384,7 +356,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER10,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power10,
 		.cpu_restore		= __restore_cpu_power10,
@@ -403,7 +374,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.cpu_setup		= __setup_cpu_power7,
 		.cpu_restore		= __restore_cpu_power7,
 		.machine_check_early	= __machine_check_early_realmode_p7,
@@ -422,7 +392,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.cpu_setup		= __setup_cpu_power7,
 		.cpu_restore		= __restore_cpu_power7,
 		.machine_check_early	= __machine_check_early_realmode_p7,
@@ -441,7 +410,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power8",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
 		.machine_check_early	= __machine_check_early_realmode_p8,
@@ -460,7 +428,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power8",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
 		.machine_check_early	= __machine_check_early_realmode_p8,
@@ -479,7 +446,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power8",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
 		.machine_check_early	= __machine_check_early_realmode_p8,
@@ -498,7 +464,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power9",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
 		.machine_check_early	= __machine_check_early_realmode_p9,
@@ -517,7 +482,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power9",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
 		.machine_check_early	= __machine_check_early_realmode_p9,
@@ -536,7 +500,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power9",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
 		.machine_check_early	= __machine_check_early_realmode_p9,
@@ -555,7 +518,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power10",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power10,
 		.cpu_restore		= __restore_cpu_power10,
 		.machine_check_early	= __machine_check_early_realmode_p10,
@@ -575,7 +537,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 4,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/cell-be",
-		.oprofile_type		= PPC_OPROFILE_CELL,
 		.platform		= "ppc-cell-be",
 	},
 	{	/* PA Semi PA6T */
@@ -592,7 +553,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_pa6t,
 		.cpu_restore		= __restore_cpu_pa6t,
 		.oprofile_cpu_type	= "ppc64/pa6t",
-		.oprofile_type		= PPC_OPROFILE_PA6T,
 		.platform		= "pa6t",
 	},
 	{	/* default match */
@@ -757,7 +717,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 745/755 */
 		.pvr_mask		= 0xfffff000,
@@ -789,7 +748,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 750FX rev 2.0 must disable HID0[DPM] */
 		.pvr_mask		= 0xffffffff,
@@ -806,7 +764,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 750FX (All revs except 2.0) */
 		.pvr_mask		= 0xffff0000,
@@ -823,7 +780,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 750GX */
 		.pvr_mask		= 0xffff0000,
@@ -840,7 +796,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 740/750 (L2CR bit need fixup for 740) */
 		.pvr_mask		= 0xffff0000,
@@ -919,7 +874,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -937,7 +891,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -955,7 +908,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -973,7 +925,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -991,7 +942,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1009,7 +959,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1027,7 +976,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1045,7 +993,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1062,7 +1009,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1080,7 +1026,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1098,7 +1043,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1211,7 +1155,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
 	{	/* e300c4 (e300c1, plus one IU) */
@@ -1228,7 +1171,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
 #endif
@@ -1925,7 +1867,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500v1,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8540",
@@ -1945,7 +1886,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500v2,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
@@ -1965,7 +1905,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500mc",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
@@ -1987,7 +1926,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500mc",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e5500,
 #ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e5500,
@@ -2010,7 +1948,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 64,
 		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc/e6500",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e6500,
 #ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e6500,
@@ -2076,10 +2013,6 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset,
 	if (old.num_pmcs && !s->num_pmcs) {
 		t->num_pmcs = old.num_pmcs;
 		t->pmc_type = old.pmc_type;
-		t->oprofile_type = old.oprofile_type;
-		t->oprofile_mmcra_sihv = old.oprofile_mmcra_sihv;
-		t->oprofile_mmcra_sipr = old.oprofile_mmcra_sipr;
-		t->oprofile_mmcra_clear = old.oprofile_mmcra_clear;
 
 		/*
 		 * If we have passed through this logic once before and
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index b5478b72c08c..358aee7c2d79 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -19,7 +19,6 @@
 #include <asm/dt_cpu_ftrs.h>
 #include <asm/mce.h>
 #include <asm/mmu.h>
-#include <asm/oprofile_impl.h>
 #include <asm/prom.h>
 #include <asm/setup.h>
 
@@ -103,7 +102,6 @@ static struct cpu_spec __initdata base_cpu_spec = {
 	.num_pmcs		= 0,
 	.pmc_type		= PPC_PMC_DEFAULT,
 	.oprofile_cpu_type	= NULL,
-	.oprofile_type		= PPC_OPROFILE_INVALID,
 	.cpu_setup		= NULL,
 	.cpu_restore		= __restore_cpu_cpufeatures,
 	.machine_check_early	= NULL,
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
deleted file mode 100644
index bb2d94c8cbe6..000000000000
--- a/arch/powerpc/oprofile/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_TOC)
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
-oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \
-		cell/spu_profiler.o cell/vma_map.o \
-		cell/spu_task_sync.o
-oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_power4.o op_model_pa6t.o
-oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
-oprofile-$(CONFIG_PPC_BOOK3S_32) += op_model_7450.o
diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c
deleted file mode 100644
index 9db7ada79d10..000000000000
--- a/arch/powerpc/oprofile/backtrace.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/**
- * Copyright (C) 2005 Brian Rogan <bcr6@cornell.edu>, IBM
- *
-**/
-
-#include <linux/time.h>
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <linux/compat.h>
-#include <asm/oprofile_impl.h>
-
-#define STACK_SP(STACK)		*(STACK)
-
-#define STACK_LR64(STACK)	*((unsigned long *)(STACK) + 2)
-#define STACK_LR32(STACK)	*((unsigned int *)(STACK) + 1)
-
-#ifdef CONFIG_PPC64
-#define STACK_LR(STACK)		STACK_LR64(STACK)
-#else
-#define STACK_LR(STACK)		STACK_LR32(STACK)
-#endif
-
-static unsigned int user_getsp32(unsigned int sp, int is_first)
-{
-	unsigned int stack_frame[2];
-	void __user *p = compat_ptr(sp);
-
-	/*
-	 * The most likely reason for this is that we returned -EFAULT,
-	 * which means that we've done all that we can do from
-	 * interrupt context.
-	 */
-	if (copy_from_user_nofault(stack_frame, (void __user *)p,
-			sizeof(stack_frame)))
-		return 0;
-
-	if (!is_first)
-		oprofile_add_trace(STACK_LR32(stack_frame));
-
-	/*
-	 * We do not enforce increasing stack addresses here because
-	 * we may transition to a different stack, eg a signal handler.
-	 */
-	return STACK_SP(stack_frame);
-}
-
-#ifdef CONFIG_PPC64
-static unsigned long user_getsp64(unsigned long sp, int is_first)
-{
-	unsigned long stack_frame[3];
-
-	if (copy_from_user_nofault(stack_frame, (void __user *)sp,
-			sizeof(stack_frame)))
-		return 0;
-
-	if (!is_first)
-		oprofile_add_trace(STACK_LR64(stack_frame));
-
-	return STACK_SP(stack_frame);
-}
-#endif
-
-static unsigned long kernel_getsp(unsigned long sp, int is_first)
-{
-	unsigned long *stack_frame = (unsigned long *)sp;
-
-	if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
-		return 0;
-
-	if (!is_first)
-		oprofile_add_trace(STACK_LR(stack_frame));
-
-	/*
-	 * We do not enforce increasing stack addresses here because
-	 * we might be transitioning from an interrupt stack to a kernel
-	 * stack. validate_sp() is designed to understand this, so just
-	 * use it.
-	 */
-	return STACK_SP(stack_frame);
-}
-
-void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	unsigned long sp = regs->gpr[1];
-	int first_frame = 1;
-
-	/* We ditch the top stackframe so need to loop through an extra time */
-	depth += 1;
-
-	if (!user_mode(regs)) {
-		while (depth--) {
-			sp = kernel_getsp(sp, first_frame);
-			if (!sp)
-				break;
-			first_frame = 0;
-		}
-	} else {
-#ifdef CONFIG_PPC64
-		if (!is_32bit_task()) {
-			while (depth--) {
-				sp = user_getsp64(sp, first_frame);
-				if (!sp)
-					break;
-				first_frame = 0;
-			}
-			return;
-		}
-#endif
-
-		while (depth--) {
-			sp = user_getsp32(sp, first_frame);
-			if (!sp)
-				break;
-			first_frame = 0;
-		}
-	}
-}
diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h
deleted file mode 100644
index e198efa9113a..000000000000
--- a/arch/powerpc/oprofile/cell/pr_util.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
- /*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: Maynard Johnson <maynardj@us.ibm.com>
- */
-
-#ifndef PR_UTIL_H
-#define PR_UTIL_H
-
-#include <linux/cpumask.h>
-#include <linux/oprofile.h>
-#include <asm/cell-pmu.h>
-#include <asm/cell-regs.h>
-#include <asm/spu.h>
-
-/* Defines used for sync_start */
-#define SKIP_GENERIC_SYNC 0
-#define SYNC_START_ERROR -1
-#define DO_GENERIC_SYNC 1
-#define SPUS_PER_NODE   8
-#define DEFAULT_TIMER_EXPIRE  (HZ / 10)
-
-extern struct delayed_work spu_work;
-extern int spu_prof_running;
-
-#define TRACE_ARRAY_SIZE 1024
-
-extern spinlock_t oprof_spu_smpl_arry_lck;
-
-struct spu_overlay_info {	/* map of sections within an SPU overlay */
-	unsigned int vma;	/* SPU virtual memory address from elf */
-	unsigned int size;	/* size of section from elf */
-	unsigned int offset;	/* offset of section into elf file */
-	unsigned int buf;
-};
-
-struct vma_to_fileoffset_map {	/* map of sections within an SPU program */
-	struct vma_to_fileoffset_map *next;	/* list pointer */
-	unsigned int vma;	/* SPU virtual memory address from elf */
-	unsigned int size;	/* size of section from elf */
-	unsigned int offset;	/* offset of section into elf file */
-	unsigned int guard_ptr;
-	unsigned int guard_val;
-        /*
-	 * The guard pointer is an entry in the _ovly_buf_table,
-	 * computed using ovly.buf as the index into the table.  Since
-	 * ovly.buf values begin at '1' to reference the first (or 0th)
-	 * entry in the _ovly_buf_table, the computation subtracts 1
-	 * from ovly.buf.
-	 * The guard value is stored in the _ovly_buf_table entry and
-	 * is an index (starting at 1) back to the _ovly_table entry
-	 * that is pointing at this _ovly_buf_table entry.  So, for
-	 * example, for an overlay scenario with one overlay segment
-	 * and two overlay sections:
-	 *      - Section 1 points to the first entry of the
-	 *        _ovly_buf_table, which contains a guard value
-	 *        of '1', referencing the first (index=0) entry of
-	 *        _ovly_table.
-	 *      - Section 2 points to the second entry of the
-	 *        _ovly_buf_table, which contains a guard value
-	 *        of '2', referencing the second (index=1) entry of
-	 *        _ovly_table.
-	 */
-
-};
-
-struct spu_buffer {
-	int last_guard_val;
-	int ctx_sw_seen;
-	unsigned long *buff;
-	unsigned int head, tail;
-};
-
-
-/* The three functions below are for maintaining and accessing
- * the vma-to-fileoffset map.
- */
-struct vma_to_fileoffset_map *create_vma_map(const struct spu *spu,
-					     unsigned long objectid);
-unsigned int vma_map_lookup(struct vma_to_fileoffset_map *map,
-			    unsigned int vma, const struct spu *aSpu,
-			    int *grd_val);
-void vma_map_free(struct vma_to_fileoffset_map *map);
-
-/*
- * Entry point for SPU profiling.
- * cycles_reset is the SPU_CYCLES count value specified by the user.
- */
-int start_spu_profiling_cycles(unsigned int cycles_reset);
-void start_spu_profiling_events(void);
-
-void stop_spu_profiling_cycles(void);
-void stop_spu_profiling_events(void);
-
-/* add the necessary profiling hooks */
-int spu_sync_start(void);
-
-/* remove the hooks */
-int spu_sync_stop(void);
-
-/* Record SPU program counter samples to the oprofile event buffer. */
-void spu_sync_buffer(int spu_num, unsigned int *samples,
-		     int num_samples);
-
-void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset);
-
-#endif	  /* PR_UTIL_H */
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
deleted file mode 100644
index cdf883445a9f..000000000000
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Authors: Maynard Johnson <maynardj@us.ibm.com>
- *	    Carl Love <carll@us.ibm.com>
- */
-
-#include <linux/hrtimer.h>
-#include <linux/smp.h>
-#include <linux/slab.h>
-#include <asm/cell-pmu.h>
-#include <asm/time.h>
-#include "pr_util.h"
-
-#define SCALE_SHIFT 14
-
-static u32 *samples;
-
-/* spu_prof_running is a flag used to indicate if spu profiling is enabled
- * or not.  It is set by the routines start_spu_profiling_cycles() and
- * start_spu_profiling_events().  The flag is cleared by the routines
- * stop_spu_profiling_cycles() and stop_spu_profiling_events().  These
- * routines are called via global_start() and global_stop() which are called in
- * op_powerpc_start() and op_powerpc_stop().  These routines are called once
- * per system as a result of the user starting/stopping oprofile.  Hence, only
- * one CPU per user at a time will be changing  the value of spu_prof_running.
- * In general, OProfile does not protect against multiple users trying to run
- * OProfile at a time.
- */
-int spu_prof_running;
-static unsigned int profiling_interval;
-
-#define NUM_SPU_BITS_TRBUF 16
-#define SPUS_PER_TB_ENTRY   4
-
-#define SPU_PC_MASK	     0xFFFF
-
-DEFINE_SPINLOCK(oprof_spu_smpl_arry_lck);
-static unsigned long oprof_spu_smpl_arry_lck_flags;
-
-void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset)
-{
-	unsigned long ns_per_cyc;
-
-	if (!freq_khz)
-		freq_khz = ppc_proc_freq/1000;
-
-	/* To calculate a timeout in nanoseconds, the basic
-	 * formula is ns = cycles_reset * (NSEC_PER_SEC / cpu frequency).
-	 * To avoid floating point math, we use the scale math
-	 * technique as described in linux/jiffies.h.  We use
-	 * a scale factor of SCALE_SHIFT, which provides 4 decimal places
-	 * of precision.  This is close enough for the purpose at hand.
-	 *
-	 * The value of the timeout should be small enough that the hw
-	 * trace buffer will not get more than about 1/3 full for the
-	 * maximum user specified (the LFSR value) hw sampling frequency.
-	 * This is to ensure the trace buffer will never fill even if the
-	 * kernel thread scheduling varies under a heavy system load.
-	 */
-
-	ns_per_cyc = (USEC_PER_SEC << SCALE_SHIFT)/freq_khz;
-	profiling_interval = (ns_per_cyc * cycles_reset) >> SCALE_SHIFT;
-
-}
-
-/*
- * Extract SPU PC from trace buffer entry
- */
-static void spu_pc_extract(int cpu, int entry)
-{
-	/* the trace buffer is 128 bits */
-	u64 trace_buffer[2];
-	u64 spu_mask;
-	int spu;
-
-	spu_mask = SPU_PC_MASK;
-
-	/* Each SPU PC is 16 bits; hence, four spus in each of
-	 * the two 64-bit buffer entries that make up the
-	 * 128-bit trace_buffer entry.	Process two 64-bit values
-	 * simultaneously.
-	 * trace[0] SPU PC contents are: 0 1 2 3
-	 * trace[1] SPU PC contents are: 4 5 6 7
-	 */
-
-	cbe_read_trace_buffer(cpu, trace_buffer);
-
-	for (spu = SPUS_PER_TB_ENTRY-1; spu >= 0; spu--) {
-		/* spu PC trace entry is upper 16 bits of the
-		 * 18 bit SPU program counter
-		 */
-		samples[spu * TRACE_ARRAY_SIZE + entry]
-			= (spu_mask & trace_buffer[0]) << 2;
-		samples[(spu + SPUS_PER_TB_ENTRY) * TRACE_ARRAY_SIZE + entry]
-			= (spu_mask & trace_buffer[1]) << 2;
-
-		trace_buffer[0] = trace_buffer[0] >> NUM_SPU_BITS_TRBUF;
-		trace_buffer[1] = trace_buffer[1] >> NUM_SPU_BITS_TRBUF;
-	}
-}
-
-static int cell_spu_pc_collection(int cpu)
-{
-	u32 trace_addr;
-	int entry;
-
-	/* process the collected SPU PC for the node */
-
-	entry = 0;
-
-	trace_addr = cbe_read_pm(cpu, trace_address);
-	while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) {
-		/* there is data in the trace buffer to process */
-		spu_pc_extract(cpu, entry);
-
-		entry++;
-
-		if (entry >= TRACE_ARRAY_SIZE)
-			/* spu_samples is full */
-			break;
-
-		trace_addr = cbe_read_pm(cpu, trace_address);
-	}
-
-	return entry;
-}
-
-
-static enum hrtimer_restart profile_spus(struct hrtimer *timer)
-{
-	ktime_t kt;
-	int cpu, node, k, num_samples, spu_num;
-
-	if (!spu_prof_running)
-		goto stop;
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		node = cbe_cpu_to_node(cpu);
-
-		/* There should only be one kernel thread at a time processing
-		 * the samples.	 In the very unlikely case that the processing
-		 * is taking a very long time and multiple kernel threads are
-		 * started to process the samples.  Make sure only one kernel
-		 * thread is working on the samples array at a time.  The
-		 * sample array must be loaded and then processed for a given
-		 * cpu.	 The sample array is not per cpu.
-		 */
-		spin_lock_irqsave(&oprof_spu_smpl_arry_lck,
-				  oprof_spu_smpl_arry_lck_flags);
-		num_samples = cell_spu_pc_collection(cpu);
-
-		if (num_samples == 0) {
-			spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
-					       oprof_spu_smpl_arry_lck_flags);
-			continue;
-		}
-
-		for (k = 0; k < SPUS_PER_NODE; k++) {
-			spu_num = k + (node * SPUS_PER_NODE);
-			spu_sync_buffer(spu_num,
-					samples + (k * TRACE_ARRAY_SIZE),
-					num_samples);
-		}
-
-		spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
-				       oprof_spu_smpl_arry_lck_flags);
-
-	}
-	smp_wmb();	/* insure spu event buffer updates are written */
-			/* don't want events intermingled... */
-
-	kt = profiling_interval;
-	if (!spu_prof_running)
-		goto stop;
-	hrtimer_forward(timer, timer->base->get_time(), kt);
-	return HRTIMER_RESTART;
-
- stop:
-	printk(KERN_INFO "SPU_PROF: spu-prof timer ending\n");
-	return HRTIMER_NORESTART;
-}
-
-static struct hrtimer timer;
-/*
- * Entry point for SPU cycle profiling.
- * NOTE:  SPU profiling is done system-wide, not per-CPU.
- *
- * cycles_reset is the count value specified by the user when
- * setting up OProfile to count SPU_CYCLES.
- */
-int start_spu_profiling_cycles(unsigned int cycles_reset)
-{
-	ktime_t kt;
-
-	pr_debug("timer resolution: %lu\n", TICK_NSEC);
-	kt = profiling_interval;
-	hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	hrtimer_set_expires(&timer, kt);
-	timer.function = profile_spus;
-
-	/* Allocate arrays for collecting SPU PC samples */
-	samples = kcalloc(SPUS_PER_NODE * TRACE_ARRAY_SIZE, sizeof(u32),
-			  GFP_KERNEL);
-
-	if (!samples)
-		return -ENOMEM;
-
-	spu_prof_running = 1;
-	hrtimer_start(&timer, kt, HRTIMER_MODE_REL);
-	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
-
-	return 0;
-}
-
-/*
- * Entry point for SPU event profiling.
- * NOTE:  SPU profiling is done system-wide, not per-CPU.
- *
- * cycles_reset is the count value specified by the user when
- * setting up OProfile to count SPU_CYCLES.
- */
-void start_spu_profiling_events(void)
-{
-	spu_prof_running = 1;
-	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
-
-	return;
-}
-
-void stop_spu_profiling_cycles(void)
-{
-	spu_prof_running = 0;
-	hrtimer_cancel(&timer);
-	kfree(samples);
-	pr_debug("SPU_PROF: stop_spu_profiling_cycles issued\n");
-}
-
-void stop_spu_profiling_events(void)
-{
-	spu_prof_running = 0;
-}
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
deleted file mode 100644
index 489f993100d5..000000000000
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ /dev/null
@@ -1,657 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: Maynard Johnson <maynardj@us.ibm.com>
- */
-
-/* The purpose of this file is to handle SPU event task switching
- * and to record SPU context information into the OProfile
- * event buffer.
- *
- * Additionally, the spu_sync_buffer function is provided as a helper
- * for recoding actual SPU program counter samples to the event buffer.
- */
-#include <linux/dcookies.h>
-#include <linux/kref.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/numa.h>
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include "pr_util.h"
-
-#define RELEASE_ALL 9999
-
-static DEFINE_SPINLOCK(buffer_lock);
-static DEFINE_SPINLOCK(cache_lock);
-static int num_spu_nodes;
-static int spu_prof_num_nodes;
-
-struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE];
-struct delayed_work spu_work;
-static unsigned max_spu_buff;
-
-static void spu_buff_add(unsigned long int value, int spu)
-{
-	/* spu buff is a circular buffer.  Add entries to the
-	 * head.  Head is the index to store the next value.
-	 * The buffer is full when there is one available entry
-	 * in the queue, i.e. head and tail can't be equal.
-	 * That way we can tell the difference between the
-	 * buffer being full versus empty.
-	 *
-	 *  ASSUMPTION: the buffer_lock is held when this function
-	 *             is called to lock the buffer, head and tail.
-	 */
-	int full = 1;
-
-	if (spu_buff[spu].head >= spu_buff[spu].tail) {
-		if ((spu_buff[spu].head - spu_buff[spu].tail)
-		    <  (max_spu_buff - 1))
-			full = 0;
-
-	} else if (spu_buff[spu].tail > spu_buff[spu].head) {
-		if ((spu_buff[spu].tail - spu_buff[spu].head)
-		    > 1)
-			full = 0;
-	}
-
-	if (!full) {
-		spu_buff[spu].buff[spu_buff[spu].head] = value;
-		spu_buff[spu].head++;
-
-		if (spu_buff[spu].head >= max_spu_buff)
-			spu_buff[spu].head = 0;
-	} else {
-		/* From the user's perspective make the SPU buffer
-		 * size management/overflow look like we are using
-		 * per cpu buffers.  The user uses the same
-		 * per cpu parameter to adjust the SPU buffer size.
-		 * Increment the sample_lost_overflow to inform
-		 * the user the buffer size needs to be increased.
-		 */
-		oprofile_cpu_buffer_inc_smpl_lost();
-	}
-}
-
-/* This function copies the per SPU buffers to the
- * OProfile kernel buffer.
- */
-static void sync_spu_buff(void)
-{
-	int spu;
-	unsigned long flags;
-	int curr_head;
-
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		/* In case there was an issue and the buffer didn't
-		 * get created skip it.
-		 */
-		if (spu_buff[spu].buff == NULL)
-			continue;
-
-		/* Hold the lock to make sure the head/tail
-		 * doesn't change while spu_buff_add() is
-		 * deciding if the buffer is full or not.
-		 * Being a little paranoid.
-		 */
-		spin_lock_irqsave(&buffer_lock, flags);
-		curr_head = spu_buff[spu].head;
-		spin_unlock_irqrestore(&buffer_lock, flags);
-
-		/* Transfer the current contents to the kernel buffer.
-		 * data can still be added to the head of the buffer.
-		 */
-		oprofile_put_buff(spu_buff[spu].buff,
-				  spu_buff[spu].tail,
-				  curr_head, max_spu_buff);
-
-		spin_lock_irqsave(&buffer_lock, flags);
-		spu_buff[spu].tail = curr_head;
-		spin_unlock_irqrestore(&buffer_lock, flags);
-	}
-
-}
-
-static void wq_sync_spu_buff(struct work_struct *work)
-{
-	/* move data from spu buffers to kernel buffer */
-	sync_spu_buff();
-
-	/* only reschedule if profiling is not done */
-	if (spu_prof_running)
-		schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
-}
-
-/* Container for caching information about an active SPU task. */
-struct cached_info {
-	struct vma_to_fileoffset_map *map;
-	struct spu *the_spu;	/* needed to access pointer to local_store */
-	struct kref cache_ref;
-};
-
-static struct cached_info *spu_info[MAX_NUMNODES * 8];
-
-static void destroy_cached_info(struct kref *kref)
-{
-	struct cached_info *info;
-
-	info = container_of(kref, struct cached_info, cache_ref);
-	vma_map_free(info->map);
-	kfree(info);
-	module_put(THIS_MODULE);
-}
-
-/* Return the cached_info for the passed SPU number.
- * ATTENTION:  Callers are responsible for obtaining the
- *	       cache_lock if needed prior to invoking this function.
- */
-static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num)
-{
-	struct kref *ref;
-	struct cached_info *ret_info;
-
-	if (spu_num >= num_spu_nodes) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Invalid index %d into spu info cache\n",
-		       __func__, __LINE__, spu_num);
-		ret_info = NULL;
-		goto out;
-	}
-	if (!spu_info[spu_num] && the_spu) {
-		ref = spu_get_profile_private_kref(the_spu->ctx);
-		if (ref) {
-			spu_info[spu_num] = container_of(ref, struct cached_info, cache_ref);
-			kref_get(&spu_info[spu_num]->cache_ref);
-		}
-	}
-
-	ret_info = spu_info[spu_num];
- out:
-	return ret_info;
-}
-
-
-/* Looks for cached info for the passed spu.  If not found, the
- * cached info is created for the passed spu.
- * Returns 0 for success; otherwise, -1 for error.
- */
-static int
-prepare_cached_spu_info(struct spu *spu, unsigned long objectId)
-{
-	unsigned long flags;
-	struct vma_to_fileoffset_map *new_map;
-	int retval = 0;
-	struct cached_info *info;
-
-	/* We won't bother getting cache_lock here since
-	 * don't do anything with the cached_info that's returned.
-	 */
-	info = get_cached_info(spu, spu->number);
-
-	if (info) {
-		pr_debug("Found cached SPU info.\n");
-		goto out;
-	}
-
-	/* Create cached_info and set spu_info[spu->number] to point to it.
-	 * spu->number is a system-wide value, not a per-node value.
-	 */
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: create vma_map failed\n",
-		       __func__, __LINE__);
-		retval = -ENOMEM;
-		goto err_alloc;
-	}
-	new_map = create_vma_map(spu, objectId);
-	if (!new_map) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: create vma_map failed\n",
-		       __func__, __LINE__);
-		retval = -ENOMEM;
-		goto err_alloc;
-	}
-
-	pr_debug("Created vma_map\n");
-	info->map = new_map;
-	info->the_spu = spu;
-	kref_init(&info->cache_ref);
-	spin_lock_irqsave(&cache_lock, flags);
-	spu_info[spu->number] = info;
-	/* Increment count before passing off ref to SPUFS. */
-	kref_get(&info->cache_ref);
-
-	/* We increment the module refcount here since SPUFS is
-	 * responsible for the final destruction of the cached_info,
-	 * and it must be able to access the destroy_cached_info()
-	 * function defined in the OProfile module.  We decrement
-	 * the module refcount in destroy_cached_info.
-	 */
-	try_module_get(THIS_MODULE);
-	spu_set_profile_private_kref(spu->ctx, &info->cache_ref,
-				destroy_cached_info);
-	spin_unlock_irqrestore(&cache_lock, flags);
-	goto out;
-
-err_alloc:
-	kfree(info);
-out:
-	return retval;
-}
-
-/*
- * NOTE:  The caller is responsible for locking the
- *	  cache_lock prior to calling this function.
- */
-static int release_cached_info(int spu_index)
-{
-	int index, end;
-
-	if (spu_index == RELEASE_ALL) {
-		end = num_spu_nodes;
-		index = 0;
-	} else {
-		if (spu_index >= num_spu_nodes) {
-			printk(KERN_ERR "SPU_PROF: "
-				"%s, line %d: "
-				"Invalid index %d into spu info cache\n",
-				__func__, __LINE__, spu_index);
-			goto out;
-		}
-		end = spu_index + 1;
-		index = spu_index;
-	}
-	for (; index < end; index++) {
-		if (spu_info[index]) {
-			kref_put(&spu_info[index]->cache_ref,
-				 destroy_cached_info);
-			spu_info[index] = NULL;
-		}
-	}
-
-out:
-	return 0;
-}
-
-/* The source code for fast_get_dcookie was "borrowed"
- * from drivers/oprofile/buffer_sync.c.
- */
-
-/* Optimisation. We can manage without taking the dcookie sem
- * because we cannot reach this code without at least one
- * dcookie user still being registered (namely, the reader
- * of the event buffer).
- */
-static inline unsigned long fast_get_dcookie(const struct path *path)
-{
-	unsigned long cookie;
-
-	if (path->dentry->d_flags & DCACHE_COOKIE)
-		return (unsigned long)path->dentry;
-	get_dcookie(path, &cookie);
-	return cookie;
-}
-
-/* Look up the dcookie for the task's mm->exe_file,
- * which corresponds loosely to "application name". Also, determine
- * the offset for the SPU ELF object.  If computed offset is
- * non-zero, it implies an embedded SPU object; otherwise, it's a
- * separate SPU binary, in which case we retrieve it's dcookie.
- * For the embedded case, we must determine if SPU ELF is embedded
- * in the executable application or another file (i.e., shared lib).
- * If embedded in a shared lib, we must get the dcookie and return
- * that to the caller.
- */
-static unsigned long
-get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp,
-			    unsigned long *spu_bin_dcookie,
-			    unsigned long spu_ref)
-{
-	unsigned long app_cookie = 0;
-	unsigned int my_offset = 0;
-	struct vm_area_struct *vma;
-	struct file *exe_file;
-	struct mm_struct *mm = spu->mm;
-
-	if (!mm)
-		goto out;
-
-	exe_file = get_mm_exe_file(mm);
-	if (exe_file) {
-		app_cookie = fast_get_dcookie(&exe_file->f_path);
-		pr_debug("got dcookie for %pD\n", exe_file);
-		fput(exe_file);
-	}
-
-	mmap_read_lock(mm);
-	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		if (vma->vm_start > spu_ref || vma->vm_end <= spu_ref)
-			continue;
-		my_offset = spu_ref - vma->vm_start;
-		if (!vma->vm_file)
-			goto fail_no_image_cookie;
-
-		pr_debug("Found spu ELF at %X(object-id:%lx) for file %pD\n",
-			 my_offset, spu_ref, vma->vm_file);
-		*offsetp = my_offset;
-		break;
-	}
-
-	*spu_bin_dcookie = fast_get_dcookie(&vma->vm_file->f_path);
-	pr_debug("got dcookie for %pD\n", vma->vm_file);
-
-	mmap_read_unlock(mm);
-
-out:
-	return app_cookie;
-
-fail_no_image_cookie:
-	mmap_read_unlock(mm);
-
-	printk(KERN_ERR "SPU_PROF: "
-		"%s, line %d: Cannot find dcookie for SPU binary\n",
-		__func__, __LINE__);
-	goto out;
-}
-
-
-
-/* This function finds or creates cached context information for the
- * passed SPU and records SPU context information into the OProfile
- * event buffer.
- */
-static int process_context_switch(struct spu *spu, unsigned long objectId)
-{
-	unsigned long flags;
-	int retval;
-	unsigned int offset = 0;
-	unsigned long spu_cookie = 0, app_dcookie;
-
-	retval = prepare_cached_spu_info(spu, objectId);
-	if (retval)
-		goto out;
-
-	/* Get dcookie first because a mutex_lock is taken in that
-	 * code path, so interrupts must not be disabled.
-	 */
-	app_dcookie = get_exec_dcookie_and_offset(spu, &offset, &spu_cookie, objectId);
-	if (!app_dcookie || !spu_cookie) {
-		retval  = -ENOENT;
-		goto out;
-	}
-
-	/* Record context info in event buffer */
-	spin_lock_irqsave(&buffer_lock, flags);
-	spu_buff_add(ESCAPE_CODE, spu->number);
-	spu_buff_add(SPU_CTX_SWITCH_CODE, spu->number);
-	spu_buff_add(spu->number, spu->number);
-	spu_buff_add(spu->pid, spu->number);
-	spu_buff_add(spu->tgid, spu->number);
-	spu_buff_add(app_dcookie, spu->number);
-	spu_buff_add(spu_cookie, spu->number);
-	spu_buff_add(offset, spu->number);
-
-	/* Set flag to indicate SPU PC data can now be written out.  If
-	 * the SPU program counter data is seen before an SPU context
-	 * record is seen, the postprocessing will fail.
-	 */
-	spu_buff[spu->number].ctx_sw_seen = 1;
-
-	spin_unlock_irqrestore(&buffer_lock, flags);
-	smp_wmb();	/* insure spu event buffer updates are written */
-			/* don't want entries intermingled... */
-out:
-	return retval;
-}
-
-/*
- * This function is invoked on either a bind_context or unbind_context.
- * If called for an unbind_context, the val arg is 0; otherwise,
- * it is the object-id value for the spu context.
- * The data arg is of type 'struct spu *'.
- */
-static int spu_active_notify(struct notifier_block *self, unsigned long val,
-				void *data)
-{
-	int retval;
-	unsigned long flags;
-	struct spu *the_spu = data;
-
-	pr_debug("SPU event notification arrived\n");
-	if (!val) {
-		spin_lock_irqsave(&cache_lock, flags);
-		retval = release_cached_info(the_spu->number);
-		spin_unlock_irqrestore(&cache_lock, flags);
-	} else {
-		retval = process_context_switch(the_spu, val);
-	}
-	return retval;
-}
-
-static struct notifier_block spu_active = {
-	.notifier_call = spu_active_notify,
-};
-
-static int number_of_online_nodes(void)
-{
-        u32 cpu; u32 tmp;
-        int nodes = 0;
-        for_each_online_cpu(cpu) {
-                tmp = cbe_cpu_to_node(cpu) + 1;
-                if (tmp > nodes)
-                        nodes++;
-        }
-        return nodes;
-}
-
-static int oprofile_spu_buff_create(void)
-{
-	int spu;
-
-	max_spu_buff = oprofile_get_cpu_buffer_size();
-
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		/* create circular buffers to store the data in.
-		 * use locks to manage accessing the buffers
-		 */
-		spu_buff[spu].head = 0;
-		spu_buff[spu].tail = 0;
-
-		/*
-		 * Create a buffer for each SPU.  Can't reliably
-		 * create a single buffer for all spus due to not
-		 * enough contiguous kernel memory.
-		 */
-
-		spu_buff[spu].buff = kzalloc((max_spu_buff
-					      * sizeof(unsigned long)),
-					     GFP_KERNEL);
-
-		if (!spu_buff[spu].buff) {
-			printk(KERN_ERR "SPU_PROF: "
-			       "%s, line %d:  oprofile_spu_buff_create "
-		       "failed to allocate spu buffer %d.\n",
-			       __func__, __LINE__, spu);
-
-			/* release the spu buffers that have been allocated */
-			while (spu >= 0) {
-				kfree(spu_buff[spu].buff);
-				spu_buff[spu].buff = 0;
-				spu--;
-			}
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-/* The main purpose of this function is to synchronize
- * OProfile with SPUFS by registering to be notified of
- * SPU task switches.
- *
- * NOTE: When profiling SPUs, we must ensure that only
- * spu_sync_start is invoked and not the generic sync_start
- * in drivers/oprofile/oprof.c.	 A return value of
- * SKIP_GENERIC_SYNC or SYNC_START_ERROR will
- * accomplish this.
- */
-int spu_sync_start(void)
-{
-	int spu;
-	int ret = SKIP_GENERIC_SYNC;
-	int register_ret;
-	unsigned long flags = 0;
-
-	spu_prof_num_nodes = number_of_online_nodes();
-	num_spu_nodes = spu_prof_num_nodes * 8;
-	INIT_DELAYED_WORK(&spu_work, wq_sync_spu_buff);
-
-	/* create buffer for storing the SPU data to put in
-	 * the kernel buffer.
-	 */
-	ret = oprofile_spu_buff_create();
-	if (ret)
-		goto out;
-
-	spin_lock_irqsave(&buffer_lock, flags);
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		spu_buff_add(ESCAPE_CODE, spu);
-		spu_buff_add(SPU_PROFILING_CODE, spu);
-		spu_buff_add(num_spu_nodes, spu);
-	}
-	spin_unlock_irqrestore(&buffer_lock, flags);
-
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		spu_buff[spu].ctx_sw_seen = 0;
-		spu_buff[spu].last_guard_val = 0;
-	}
-
-	/* Register for SPU events  */
-	register_ret = spu_switch_event_register(&spu_active);
-	if (register_ret) {
-		ret = SYNC_START_ERROR;
-		goto out;
-	}
-
-	pr_debug("spu_sync_start -- running.\n");
-out:
-	return ret;
-}
-
-/* Record SPU program counter samples to the oprofile event buffer. */
-void spu_sync_buffer(int spu_num, unsigned int *samples,
-		     int num_samples)
-{
-	unsigned long long file_offset;
-	unsigned long flags;
-	int i;
-	struct vma_to_fileoffset_map *map;
-	struct spu *the_spu;
-	unsigned long long spu_num_ll = spu_num;
-	unsigned long long spu_num_shifted = spu_num_ll << 32;
-	struct cached_info *c_info;
-
-	/* We need to obtain the cache_lock here because it's
-	 * possible that after getting the cached_info, the SPU job
-	 * corresponding to this cached_info may end, thus resulting
-	 * in the destruction of the cached_info.
-	 */
-	spin_lock_irqsave(&cache_lock, flags);
-	c_info = get_cached_info(NULL, spu_num);
-	if (!c_info) {
-		/* This legitimately happens when the SPU task ends before all
-		 * samples are recorded.
-		 * No big deal -- so we just drop a few samples.
-		 */
-		pr_debug("SPU_PROF: No cached SPU context "
-			  "for SPU #%d. Dropping samples.\n", spu_num);
-		goto out;
-	}
-
-	map = c_info->map;
-	the_spu = c_info->the_spu;
-	spin_lock(&buffer_lock);
-	for (i = 0; i < num_samples; i++) {
-		unsigned int sample = *(samples+i);
-		int grd_val = 0;
-		file_offset = 0;
-		if (sample == 0)
-			continue;
-		file_offset = vma_map_lookup( map, sample, the_spu, &grd_val);
-
-		/* If overlays are used by this SPU application, the guard
-		 * value is non-zero, indicating which overlay section is in
-		 * use.	 We need to discard samples taken during the time
-		 * period which an overlay occurs (i.e., guard value changes).
-		 */
-		if (grd_val && grd_val != spu_buff[spu_num].last_guard_val) {
-			spu_buff[spu_num].last_guard_val = grd_val;
-			/* Drop the rest of the samples. */
-			break;
-		}
-
-		/* We must ensure that the SPU context switch has been written
-		 * out before samples for the SPU.  Otherwise, the SPU context
-		 * information is not available and the postprocessing of the
-		 * SPU PC will fail with no available anonymous map information.
-		 */
-		if (spu_buff[spu_num].ctx_sw_seen)
-			spu_buff_add((file_offset | spu_num_shifted),
-					 spu_num);
-	}
-	spin_unlock(&buffer_lock);
-out:
-	spin_unlock_irqrestore(&cache_lock, flags);
-}
-
-
-int spu_sync_stop(void)
-{
-	unsigned long flags = 0;
-	int ret;
-	int k;
-
-	ret = spu_switch_event_unregister(&spu_active);
-
-	if (ret)
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: spu_switch_event_unregister "	\
-		       "returned %d\n",
-		       __func__, __LINE__, ret);
-
-	/* flush any remaining data in the per SPU buffers */
-	sync_spu_buff();
-
-	spin_lock_irqsave(&cache_lock, flags);
-	ret = release_cached_info(RELEASE_ALL);
-	spin_unlock_irqrestore(&cache_lock, flags);
-
-	/* remove scheduled work queue item rather then waiting
-	 * for every queued entry to execute.  Then flush pending
-	 * system wide buffer to event buffer.
-	 */
-	cancel_delayed_work(&spu_work);
-
-	for (k = 0; k < num_spu_nodes; k++) {
-		spu_buff[k].ctx_sw_seen = 0;
-
-		/*
-		 * spu_sys_buff will be null if there was a problem
-		 * allocating the buffer.  Only delete if it exists.
-		 */
-		kfree(spu_buff[k].buff);
-		spu_buff[k].buff = 0;
-	}
-	pr_debug("spu_sync_stop -- done.\n");
-	return ret;
-}
-
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
deleted file mode 100644
index 7c4b19cfde88..000000000000
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ /dev/null
@@ -1,279 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: Maynard Johnson <maynardj@us.ibm.com>
- */
-
-/* The code in this source file is responsible for generating
- * vma-to-fileOffset maps for both overlay and non-overlay SPU
- * applications.
- */
-
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-#include <linux/elf.h>
-#include <linux/slab.h>
-#include "pr_util.h"
-
-
-void vma_map_free(struct vma_to_fileoffset_map *map)
-{
-	while (map) {
-		struct vma_to_fileoffset_map *next = map->next;
-		kfree(map);
-		map = next;
-	}
-}
-
-unsigned int
-vma_map_lookup(struct vma_to_fileoffset_map *map, unsigned int vma,
-	       const struct spu *aSpu, int *grd_val)
-{
-	/*
-	 * Default the offset to the physical address + a flag value.
-	 * Addresses of dynamically generated code can't be found in the vma
-	 * map.  For those addresses the flagged value will be sent on to
-	 * the user space tools so they can be reported rather than just
-	 * thrown away.
-	 */
-	u32 offset = 0x10000000 + vma;
-	u32 ovly_grd;
-
-	for (; map; map = map->next) {
-		if (vma < map->vma || vma >= map->vma + map->size)
-			continue;
-
-		if (map->guard_ptr) {
-			ovly_grd = *(u32 *)(aSpu->local_store + map->guard_ptr);
-			if (ovly_grd != map->guard_val)
-				continue;
-			*grd_val = ovly_grd;
-		}
-		offset = vma - map->vma + map->offset;
-		break;
-	}
-
-	return offset;
-}
-
-static struct vma_to_fileoffset_map *
-vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma,
-	    unsigned int size, unsigned int offset, unsigned int guard_ptr,
-	    unsigned int guard_val)
-{
-	struct vma_to_fileoffset_map *new = kzalloc(sizeof(*new), GFP_KERNEL);
-
-	if (!new) {
-		printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
-		       __func__, __LINE__);
-		vma_map_free(map);
-		return NULL;
-	}
-
-	new->next = map;
-	new->vma = vma;
-	new->size = size;
-	new->offset = offset;
-	new->guard_ptr = guard_ptr;
-	new->guard_val = guard_val;
-
-	return new;
-}
-
-
-/* Parse SPE ELF header and generate a list of vma_maps.
- * A pointer to the first vma_map in the generated list
- * of vma_maps is returned.  */
-struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
-					     unsigned long __spu_elf_start)
-{
-	static const unsigned char expected[EI_PAD] = {
-		[EI_MAG0] = ELFMAG0,
-		[EI_MAG1] = ELFMAG1,
-		[EI_MAG2] = ELFMAG2,
-		[EI_MAG3] = ELFMAG3,
-		[EI_CLASS] = ELFCLASS32,
-		[EI_DATA] = ELFDATA2MSB,
-		[EI_VERSION] = EV_CURRENT,
-		[EI_OSABI] = ELFOSABI_NONE
-	};
-
-	int grd_val;
-	struct vma_to_fileoffset_map *map = NULL;
-	void __user *spu_elf_start = (void __user *)__spu_elf_start;
-	struct spu_overlay_info ovly;
-	unsigned int overlay_tbl_offset = -1;
-	Elf32_Phdr __user *phdr_start;
-	Elf32_Shdr __user *shdr_start;
-	Elf32_Ehdr ehdr;
-	Elf32_Phdr phdr;
-	Elf32_Shdr shdr, shdr_str;
-	Elf32_Sym sym;
-	int i, j;
-	char name[32];
-
-	unsigned int ovly_table_sym = 0;
-	unsigned int ovly_buf_table_sym = 0;
-	unsigned int ovly_table_end_sym = 0;
-	unsigned int ovly_buf_table_end_sym = 0;
-	struct spu_overlay_info __user *ovly_table;
-	unsigned int n_ovlys;
-
-	/* Get and validate ELF header.	 */
-
-	if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr)))
-		goto fail;
-
-	if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Unexpected e_ident parsing SPU ELF\n",
-		       __func__, __LINE__);
-		goto fail;
-	}
-	if (ehdr.e_machine != EM_SPU) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Unexpected e_machine parsing SPU ELF\n",
-		       __func__,  __LINE__);
-		goto fail;
-	}
-	if (ehdr.e_type != ET_EXEC) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Unexpected e_type parsing SPU ELF\n",
-		       __func__, __LINE__);
-		goto fail;
-	}
-	phdr_start = spu_elf_start + ehdr.e_phoff;
-	shdr_start = spu_elf_start + ehdr.e_shoff;
-
-	/* Traverse program headers.  */
-	for (i = 0; i < ehdr.e_phnum; i++) {
-		if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr)))
-			goto fail;
-
-		if (phdr.p_type != PT_LOAD)
-			continue;
-		if (phdr.p_flags & (1 << 27))
-			continue;
-
-		map = vma_map_add(map, phdr.p_vaddr, phdr.p_memsz,
-				  phdr.p_offset, 0, 0);
-		if (!map)
-			goto fail;
-	}
-
-	pr_debug("SPU_PROF: Created non-overlay maps\n");
-	/* Traverse section table and search for overlay-related symbols.  */
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr)))
-			goto fail;
-
-		if (shdr.sh_type != SHT_SYMTAB)
-			continue;
-		if (shdr.sh_entsize != sizeof (sym))
-			continue;
-
-		if (copy_from_user(&shdr_str,
-				   shdr_start + shdr.sh_link,
-				   sizeof(shdr)))
-			goto fail;
-
-		if (shdr_str.sh_type != SHT_STRTAB)
-			goto fail;
-
-		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
-			if (copy_from_user(&sym, spu_elf_start +
-						 shdr.sh_offset +
-						 j * sizeof (sym),
-					   sizeof (sym)))
-				goto fail;
-
-			if (copy_from_user(name, 
-					   spu_elf_start + shdr_str.sh_offset +
-					   sym.st_name,
-					   20))
-				goto fail;
-
-			if (memcmp(name, "_ovly_table", 12) == 0)
-				ovly_table_sym = sym.st_value;
-			if (memcmp(name, "_ovly_buf_table", 16) == 0)
-				ovly_buf_table_sym = sym.st_value;
-			if (memcmp(name, "_ovly_table_end", 16) == 0)
-				ovly_table_end_sym = sym.st_value;
-			if (memcmp(name, "_ovly_buf_table_end", 20) == 0)
-				ovly_buf_table_end_sym = sym.st_value;
-		}
-	}
-
-	/* If we don't have overlays, we're done.  */
-	if (ovly_table_sym == 0 || ovly_buf_table_sym == 0
-	    || ovly_table_end_sym == 0 || ovly_buf_table_end_sym == 0) {
-		pr_debug("SPU_PROF: No overlay table found\n");
-		goto out;
-	} else {
-		pr_debug("SPU_PROF: Overlay table found\n");
-	}
-
-	/* The _ovly_table symbol represents a table with one entry
-	 * per overlay section.	 The _ovly_buf_table symbol represents
-	 * a table with one entry per overlay region.
-	 * The struct spu_overlay_info gives the structure of the _ovly_table
-	 * entries.  The structure of _ovly_table_buf is simply one
-	 * u32 word per entry.
-	 */
-	overlay_tbl_offset = vma_map_lookup(map, ovly_table_sym,
-					    aSpu, &grd_val);
-	if (overlay_tbl_offset > 0x10000000) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Error finding SPU overlay table\n",
-		       __func__, __LINE__);
-		goto fail;
-	}
-	ovly_table = spu_elf_start + overlay_tbl_offset;
-
-	n_ovlys = (ovly_table_end_sym -
-		   ovly_table_sym) / sizeof (ovly);
-
-	/* Traverse overlay table.  */
-	for (i = 0; i < n_ovlys; i++) {
-		if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly)))
-			goto fail;
-
-		/* The ovly.vma/size/offset arguments are analogous to the same
-		 * arguments used above for non-overlay maps.  The final two
-		 * args are referred to as the guard pointer and the guard
-		 * value.
-		 * The guard pointer is an entry in the _ovly_buf_table,
-		 * computed using ovly.buf as the index into the table.	 Since
-		 * ovly.buf values begin at '1' to reference the first (or 0th)
-		 * entry in the _ovly_buf_table, the computation subtracts 1
-		 * from ovly.buf.
-		 * The guard value is stored in the _ovly_buf_table entry and
-		 * is an index (starting at 1) back to the _ovly_table entry
-		 * that is pointing at this _ovly_buf_table entry.  So, for
-		 * example, for an overlay scenario with one overlay segment
-		 * and two overlay sections:
-		 *	- Section 1 points to the first entry of the
-		 *	  _ovly_buf_table, which contains a guard value
-		 *	  of '1', referencing the first (index=0) entry of
-		 *	  _ovly_table.
-		 *	- Section 2 points to the second entry of the
-		 *	  _ovly_buf_table, which contains a guard value
-		 *	  of '2', referencing the second (index=1) entry of
-		 *	  _ovly_table.
-		 */
-		map = vma_map_add(map, ovly.vma, ovly.size, ovly.offset,
-				  ovly_buf_table_sym + (ovly.buf-1) * 4, i+1);
-		if (!map)
-			goto fail;
-	}
-	goto out;
-
- fail:
-	map = NULL;
- out:
-	return map;
-}
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
deleted file mode 100644
index 0fb528c2b3a1..000000000000
--- a/arch/powerpc/oprofile/common.c
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * PPC 64 oprofile support:
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- * PPC 32 oprofile support: (based on PPC 64 support)
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *	Author: Andy Fleming
- *
- * Based on alpha version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/pmc.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-#include <asm/firmware.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static int op_per_cpu_rc;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
-	model->handle_interrupt(regs, ctr);
-}
-
-static void op_powerpc_cpu_setup(void *dummy)
-{
-	int ret;
-
-	ret = model->cpu_setup(ctr);
-
-	if (ret != 0)
-		op_per_cpu_rc = ret;
-}
-
-static int op_powerpc_setup(void)
-{
-	int err;
-
-	op_per_cpu_rc = 0;
-
-	/* Grab the hardware */
-	err = reserve_pmc_hardware(op_handle_interrupt);
-	if (err)
-		return err;
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	op_per_cpu_rc = model->reg_setup(ctr, &sys, model->num_counters);
-
-	if (op_per_cpu_rc)
-		goto out;
-
-	/* Configure the registers on all cpus.	 If an error occurs on one
-	 * of the cpus, op_per_cpu_rc will be set to the error */
-	on_each_cpu(op_powerpc_cpu_setup, NULL, 1);
-
-out:	if (op_per_cpu_rc) {
-		/* error on setup release the performance counter hardware */
-		release_pmc_hardware();
-	}
-
-	return op_per_cpu_rc;
-}
-
-static void op_powerpc_shutdown(void)
-{
-	release_pmc_hardware();
-}
-
-static void op_powerpc_cpu_start(void *dummy)
-{
-	/* If any of the cpus have return an error, set the
-	 * global flag to the error so it can be returned
-	 * to the generic OProfile caller.
-	 */
-	int ret;
-
-	ret = model->start(ctr);
-	if (ret != 0)
-		op_per_cpu_rc = ret;
-}
-
-static int op_powerpc_start(void)
-{
-	op_per_cpu_rc = 0;
-
-	if (model->global_start)
-		return model->global_start(ctr);
-	if (model->start) {
-		on_each_cpu(op_powerpc_cpu_start, NULL, 1);
-		return op_per_cpu_rc;
-	}
-	return -EIO; /* No start function is defined for this
-			power architecture */
-}
-
-static inline void op_powerpc_cpu_stop(void *dummy)
-{
-	model->stop();
-}
-
-static void op_powerpc_stop(void)
-{
-	if (model->stop)
-		on_each_cpu(op_powerpc_cpu_stop, NULL, 1);
-        if (model->global_stop)
-                model->global_stop();
-}
-
-static int op_powerpc_create_files(struct dentry *root)
-{
-	int i;
-
-#ifdef CONFIG_PPC64
-	/*
-	 * There is one mmcr0, mmcr1 and mmcra for setting the events for
-	 * all of the counters.
-	 */
-	oprofilefs_create_ulong(root, "mmcr0", &sys.mmcr0);
-	oprofilefs_create_ulong(root, "mmcr1", &sys.mmcr1);
-	oprofilefs_create_ulong(root, "mmcra", &sys.mmcra);
-#ifdef CONFIG_OPROFILE_CELL
-	/* create a file the user tool can check to see what level of profiling
-	 * support exits with this kernel. Initialize bit mask to indicate
-	 * what support the kernel has:
-	 * bit 0      -  Supports SPU event profiling in addition to PPU
-	 *               event and cycles; and SPU cycle profiling
-	 * bits 1-31  -  Currently unused.
-	 *
-	 * If the file does not exist, then the kernel only supports SPU
-	 * cycle profiling, PPU event and cycle profiling.
-	 */
-	oprofilefs_create_ulong(root, "cell_support", &sys.cell_support);
-	sys.cell_support = 0x1; /* Note, the user OProfile tool must check
-				 * that this bit is set before attempting to
-				 * user SPU event profiling.  Older kernels
-				 * will not have this file, hence the user
-				 * tool is not allowed to do SPU event
-				 * profiling on older kernels.  Older kernels
-				 * will accept SPU events but collected data
-				 * is garbage.
-				 */
-#endif
-#endif
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-
-		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
-
-		/*
-		 * Classic PowerPC doesn't support per-counter
-		 * control like this, but the options are
-		 * expected, so they remain.  For Freescale
-		 * Book-E style performance monitors, we do
-		 * support them.
-		 */
-		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
-
-		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	oprofilefs_create_ulong(root, "enable_kernel", &sys.enable_kernel);
-	oprofilefs_create_ulong(root, "enable_user", &sys.enable_user);
-
-	/* Default to tracing both kernel and user */
-	sys.enable_kernel = 1;
-	sys.enable_user = 1;
-
-	return 0;
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	if (!cur_cpu_spec->oprofile_cpu_type)
-		return -ENODEV;
-
-	switch (cur_cpu_spec->oprofile_type) {
-#ifdef CONFIG_PPC_BOOK3S_64
-#ifdef CONFIG_OPROFILE_CELL
-		case PPC_OPROFILE_CELL:
-			if (firmware_has_feature(FW_FEATURE_LPAR))
-				return -ENODEV;
-			model = &op_model_cell;
-			ops->sync_start = model->sync_start;
-			ops->sync_stop = model->sync_stop;
-			break;
-#endif
-		case PPC_OPROFILE_POWER4:
-			model = &op_model_power4;
-			break;
-		case PPC_OPROFILE_PA6T:
-			model = &op_model_pa6t;
-			break;
-#endif
-#ifdef CONFIG_PPC_BOOK3S_32
-		case PPC_OPROFILE_G4:
-			model = &op_model_7450;
-			break;
-#endif
-#if defined(CONFIG_FSL_EMB_PERFMON)
-		case PPC_OPROFILE_FSL_EMB:
-			model = &op_model_fsl_emb;
-			break;
-#endif
-		default:
-			return -ENODEV;
-	}
-
-	model->num_counters = cur_cpu_spec->num_pmcs;
-
-	ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
-	ops->create_files = op_powerpc_create_files;
-	ops->setup = op_powerpc_setup;
-	ops->shutdown = op_powerpc_shutdown;
-	ops->start = op_powerpc_start;
-	ops->stop = op_powerpc_stop;
-	ops->backtrace = op_powerpc_backtrace;
-
-	printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n",
-	       ops->cpu_type);
-
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c
deleted file mode 100644
index 5ebc25188a72..000000000000
--- a/arch/powerpc/oprofile/op_model_7450.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/powerpc/oprofile/op_model_7450.c
- *
- * Freescale 745x/744x oprofile support, based on fsl_booke support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/page.h>
-#include <asm/pmc.h>
-#include <asm/oprofile_impl.h>
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int oprofile_running;
-static u32 mmcr0_val, mmcr1_val, mmcr2_val, num_pmcs;
-
-#define MMCR0_PMC1_SHIFT	6
-#define MMCR0_PMC2_SHIFT	0
-#define MMCR1_PMC3_SHIFT	27
-#define MMCR1_PMC4_SHIFT	22
-#define MMCR1_PMC5_SHIFT	17
-#define MMCR1_PMC6_SHIFT	11
-
-#define mmcr0_event1(event) \
-	((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL)
-#define mmcr0_event2(event) \
-	((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL)
-
-#define mmcr1_event3(event) \
-	((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL)
-#define mmcr1_event4(event) \
-	((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL)
-#define mmcr1_event5(event) \
-	((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL)
-#define mmcr1_event6(event) \
-	((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL)
-
-#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0)
-
-/* Unfreezes the counters on this CPU, enables the interrupt,
- * enables the counters to trigger the interrupt, and sets the
- * counters to only count when the mark bit is not set.
- */
-static void pmc_start_ctrs(void)
-{
-	u32 mmcr0 = mfspr(SPRN_MMCR0);
-
-	mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0);
-	mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
-
-	mtspr(SPRN_MMCR0, mmcr0);
-}
-
-/* Disables the counters on this CPU, and freezes them */
-static void pmc_stop_ctrs(void)
-{
-	u32 mmcr0 = mfspr(SPRN_MMCR0);
-
-	mmcr0 |= MMCR0_FC;
-	mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
-
-	mtspr(SPRN_MMCR0, mmcr0);
-}
-
-/* Configures the counters on this CPU based on the global
- * settings */
-static int fsl7450_cpu_setup(struct op_counter_config *ctr)
-{
-	/* freeze all counters */
-	pmc_stop_ctrs();
-
-	mtspr(SPRN_MMCR0, mmcr0_val);
-	mtspr(SPRN_MMCR1, mmcr1_val);
-	if (num_pmcs > 4)
-		mtspr(SPRN_MMCR2, mmcr2_val);
-
-	return 0;
-}
-
-/* Configures the global settings for the countes on all CPUs. */
-static int fsl7450_reg_setup(struct op_counter_config *ctr,
-			     struct op_system_config *sys,
-			     int num_ctrs)
-{
-	int i;
-
-	num_pmcs = num_ctrs;
-	/* Our counters count up, and "count" refers to
-	 * how much before the next interrupt, and we interrupt
-	 * on overflow.  So we calculate the starting value
-	 * which will give us "count" until overflow.
-	 * Then we set the events on the enabled counters */
-	for (i = 0; i < num_ctrs; ++i)
-		reset_value[i] = 0x80000000UL - ctr[i].count;
-
-	/* Set events for Counters 1 & 2 */
-	mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event)
-		| mmcr0_event2(ctr[1].event);
-
-	/* Setup user/kernel bits */
-	if (sys->enable_kernel)
-		mmcr0_val &= ~(MMCR0_FCS);
-
-	if (sys->enable_user)
-		mmcr0_val &= ~(MMCR0_FCP);
-
-	/* Set events for Counters 3-6 */
-	mmcr1_val = mmcr1_event3(ctr[2].event)
-		| mmcr1_event4(ctr[3].event);
-	if (num_ctrs > 4)
-		mmcr1_val |= mmcr1_event5(ctr[4].event)
-			| mmcr1_event6(ctr[5].event);
-
-	mmcr2_val = 0;
-
-	return 0;
-}
-
-/* Sets the counters on this CPU to the chosen values, and starts them */
-static int fsl7450_start(struct op_counter_config *ctr)
-{
-	int i;
-
-	mtmsr(mfmsr() | MSR_PMM);
-
-	for (i = 0; i < num_pmcs; ++i) {
-		if (ctr[i].enabled)
-			classic_ctr_write(i, reset_value[i]);
-		else
-			classic_ctr_write(i, 0);
-	}
-
-	/* Clear the freeze bit, and enable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PMM bit */
-	pmc_start_ctrs();
-
-	oprofile_running = 1;
-
-	return 0;
-}
-
-/* Stop the counters on this CPU */
-static void fsl7450_stop(void)
-{
-	/* freeze counters */
-	pmc_stop_ctrs();
-
-	oprofile_running = 0;
-
-	mb();
-}
-
-
-/* Handle the interrupt on this CPU, and log a sample for each
- * event that triggered the interrupt */
-static void fsl7450_handle_interrupt(struct pt_regs *regs,
-				    struct op_counter_config *ctr)
-{
-	unsigned long pc;
-	int is_kernel;
-	int val;
-	int i;
-
-	/* set the PMM bit (see comment below) */
-	mtmsr(mfmsr() | MSR_PMM);
-
-	pc = mfspr(SPRN_SIAR);
-	is_kernel = is_kernel_addr(pc);
-
-	for (i = 0; i < num_pmcs; ++i) {
-		val = classic_ctr_read(i);
-		if (val < 0) {
-			if (oprofile_running && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				classic_ctr_write(i, reset_value[i]);
-			} else {
-				classic_ctr_write(i, 0);
-			}
-		}
-	}
-
-	/* The freeze bit was set by the interrupt. */
-	/* Clear the freeze bit, and reenable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PM/M bit */
-	pmc_start_ctrs();
-}
-
-struct op_powerpc_model op_model_7450= {
-	.reg_setup		= fsl7450_reg_setup,
-	.cpu_setup		= fsl7450_cpu_setup,
-	.start			= fsl7450_start,
-	.stop			= fsl7450_stop,
-	.handle_interrupt	= fsl7450_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
deleted file mode 100644
index 7eb73070b7be..000000000000
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ /dev/null
@@ -1,1709 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: David Erb (djerb@us.ibm.com)
- * Modifications:
- *	   Carl Love <carll@us.ibm.com>
- *	   Maynard Johnson <maynardj@us.ibm.com>
- */
-
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/kthread.h>
-#include <linux/oprofile.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <asm/cell-pmu.h>
-#include <asm/cputable.h>
-#include <asm/firmware.h>
-#include <asm/io.h>
-#include <asm/oprofile_impl.h>
-#include <asm/processor.h>
-#include <asm/prom.h>
-#include <asm/ptrace.h>
-#include <asm/reg.h>
-#include <asm/rtas.h>
-#include <asm/cell-regs.h>
-
-#include "../platforms/cell/interrupt.h"
-#include "cell/pr_util.h"
-
-#define PPU_PROFILING            0
-#define SPU_PROFILING_CYCLES     1
-#define SPU_PROFILING_EVENTS     2
-
-#define SPU_EVENT_NUM_START      4100
-#define SPU_EVENT_NUM_STOP       4399
-#define SPU_PROFILE_EVENT_ADDR          4363  /* spu, address trace, decimal */
-#define SPU_PROFILE_EVENT_ADDR_MASK_A   0x146 /* sub unit set to zero */
-#define SPU_PROFILE_EVENT_ADDR_MASK_B   0x186 /* sub unit set to zero */
-
-#define NUM_SPUS_PER_NODE    8
-#define SPU_CYCLES_EVENT_NUM 2	/*  event number for SPU_CYCLES */
-
-#define PPU_CYCLES_EVENT_NUM 1	/*  event number for CYCLES */
-#define PPU_CYCLES_GRP_NUM   1	/* special group number for identifying
-				 * PPU_CYCLES event
-				 */
-#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */
-
-#define NUM_THREADS 2         /* number of physical threads in
-			       * physical processor
-			       */
-#define NUM_DEBUG_BUS_WORDS 4
-#define NUM_INPUT_BUS_WORDS 2
-
-#define MAX_SPU_COUNT 0xFFFFFF	/* maximum 24 bit LFSR value */
-
-/* Minimum HW interval timer setting to send value to trace buffer is 10 cycle.
- * To configure counter to send value every N cycles set counter to
- * 2^32 - 1 - N.
- */
-#define NUM_INTERVAL_CYC  0xFFFFFFFF - 10
-
-/*
- * spu_cycle_reset is the number of cycles between samples.
- * This variable is used for SPU profiling and should ONLY be set
- * at the beginning of cell_reg_setup; otherwise, it's read-only.
- */
-static unsigned int spu_cycle_reset;
-static unsigned int profiling_mode;
-static int spu_evnt_phys_spu_indx;
-
-struct pmc_cntrl_data {
-	unsigned long vcntr;
-	unsigned long evnts;
-	unsigned long masks;
-	unsigned long enabled;
-};
-
-/*
- * ibm,cbe-perftools rtas parameters
- */
-struct pm_signal {
-	u16 cpu;		/* Processor to modify */
-	u16 sub_unit;		/* hw subunit this applies to (if applicable)*/
-	short int signal_group; /* Signal Group to Enable/Disable */
-	u8 bus_word;		/* Enable/Disable on this Trace/Trigger/Event
-				 * Bus Word(s) (bitmask)
-				 */
-	u8 bit;			/* Trigger/Event bit (if applicable) */
-};
-
-/*
- * rtas call arguments
- */
-enum {
-	SUBFUNC_RESET = 1,
-	SUBFUNC_ACTIVATE = 2,
-	SUBFUNC_DEACTIVATE = 3,
-
-	PASSTHRU_IGNORE = 0,
-	PASSTHRU_ENABLE = 1,
-	PASSTHRU_DISABLE = 2,
-};
-
-struct pm_cntrl {
-	u16 enable;
-	u16 stop_at_max;
-	u16 trace_mode;
-	u16 freeze;
-	u16 count_mode;
-	u16 spu_addr_trace;
-	u8  trace_buf_ovflw;
-};
-
-static struct {
-	u32 group_control;
-	u32 debug_bus_control;
-	struct pm_cntrl pm_cntrl;
-	u32 pm07_cntrl[NR_PHYS_CTRS];
-} pm_regs;
-
-#define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12)
-#define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4)
-#define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8)
-#define GET_POLARITY(x) ((x & 0x00000002) >> 1)
-#define GET_COUNT_CYCLES(x) (x & 0x00000001)
-#define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2)
-
-static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values);
-static unsigned long spu_pm_cnt[MAX_NUMNODES * NUM_SPUS_PER_NODE];
-static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS];
-
-/*
- * The CELL profiling code makes rtas calls to setup the debug bus to
- * route the performance signals.  Additionally, SPU profiling requires
- * a second rtas call to setup the hardware to capture the SPU PCs.
- * The EIO error value is returned if the token lookups or the rtas
- * call fail.  The EIO error number is the best choice of the existing
- * error numbers.  The probability of rtas related error is very low.  But
- * by returning EIO and printing additional information to dmsg the user
- * will know that OProfile did not start and dmesg will tell them why.
- * OProfile does not support returning errors on Stop.	Not a huge issue
- * since failure to reset the debug bus or stop the SPU PC collection is
- * not a fatel issue.  Chances are if the Stop failed, Start doesn't work
- * either.
- */
-
-/*
- * Interpetation of hdw_thread:
- * 0 - even virtual cpus 0, 2, 4,...
- * 1 - odd virtual cpus 1, 3, 5, ...
- *
- * FIXME: this is strictly wrong, we need to clean this up in a number
- * of places. It works for now. -arnd
- */
-static u32 hdw_thread;
-
-static u32 virt_cntr_inter_mask;
-static struct timer_list timer_virt_cntr;
-static struct timer_list timer_spu_event_swap;
-
-/*
- * pm_signal needs to be global since it is initialized in
- * cell_reg_setup at the time when the necessary information
- * is available.
- */
-static struct pm_signal pm_signal[NR_PHYS_CTRS];
-static int pm_rtas_token;    /* token for debug bus setup call */
-static int spu_rtas_token;   /* token for SPU cycle profiling */
-
-static u32 reset_value[NR_PHYS_CTRS];
-static int num_counters;
-static int oprofile_running;
-static DEFINE_SPINLOCK(cntr_lock);
-
-static u32 ctr_enabled;
-
-static unsigned char input_bus[NUM_INPUT_BUS_WORDS];
-
-/*
- * Firmware interface functions
- */
-static int
-rtas_ibm_cbe_perftools(int subfunc, int passthru,
-		       void *address, unsigned long length)
-{
-	u64 paddr = __pa(address);
-
-	return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc,
-			 passthru, paddr >> 32, paddr & 0xffffffff, length);
-}
-
-static void pm_rtas_reset_signals(u32 node)
-{
-	int ret;
-	struct pm_signal pm_signal_local;
-
-	/*
-	 * The debug bus is being set to the passthru disable state.
-	 * However, the FW still expects at least one legal signal routing
-	 * entry or it will return an error on the arguments.	If we don't
-	 * supply a valid entry, we must ignore all return values.  Ignoring
-	 * all return values means we might miss an error we should be
-	 * concerned about.
-	 */
-
-	/*  fw expects physical cpu #. */
-	pm_signal_local.cpu = node;
-	pm_signal_local.signal_group = 21;
-	pm_signal_local.bus_word = 1;
-	pm_signal_local.sub_unit = 0;
-	pm_signal_local.bit = 0;
-
-	ret = rtas_ibm_cbe_perftools(SUBFUNC_RESET, PASSTHRU_DISABLE,
-				     &pm_signal_local,
-				     sizeof(struct pm_signal));
-
-	if (unlikely(ret))
-		/*
-		 * Not a fatal error. For Oprofile stop, the oprofile
-		 * functions do not support returning an error for
-		 * failure to stop OProfile.
-		 */
-		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __func__, ret);
-}
-
-static int pm_rtas_activate_signals(u32 node, u32 count)
-{
-	int ret;
-	int i, j;
-	struct pm_signal pm_signal_local[NR_PHYS_CTRS];
-
-	/*
-	 * There is no debug setup required for the cycles event.
-	 * Note that only events in the same group can be used.
-	 * Otherwise, there will be conflicts in correctly routing
-	 * the signals on the debug bus.  It is the responsibility
-	 * of the OProfile user tool to check the events are in
-	 * the same group.
-	 */
-	i = 0;
-	for (j = 0; j < count; j++) {
-		if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) {
-
-			/* fw expects physical cpu # */
-			pm_signal_local[i].cpu = node;
-			pm_signal_local[i].signal_group
-				= pm_signal[j].signal_group;
-			pm_signal_local[i].bus_word = pm_signal[j].bus_word;
-			pm_signal_local[i].sub_unit = pm_signal[j].sub_unit;
-			pm_signal_local[i].bit = pm_signal[j].bit;
-			i++;
-		}
-	}
-
-	if (i != 0) {
-		ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE,
-					     pm_signal_local,
-					     i * sizeof(struct pm_signal));
-
-		if (unlikely(ret)) {
-			printk(KERN_WARNING "%s: rtas returned: %d\n",
-			       __func__, ret);
-			return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * PM Signal functions
- */
-static void set_pm_event(u32 ctr, int event, u32 unit_mask)
-{
-	struct pm_signal *p;
-	u32 signal_bit;
-	u32 bus_word, bus_type, count_cycles, polarity, input_control;
-	int j, i;
-
-	if (event == PPU_CYCLES_EVENT_NUM) {
-		/* Special Event: Count all cpu cycles */
-		pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES;
-		p = &(pm_signal[ctr]);
-		p->signal_group = PPU_CYCLES_GRP_NUM;
-		p->bus_word = 1;
-		p->sub_unit = 0;
-		p->bit = 0;
-		goto out;
-	} else {
-		pm_regs.pm07_cntrl[ctr] = 0;
-	}
-
-	bus_word = GET_BUS_WORD(unit_mask);
-	bus_type = GET_BUS_TYPE(unit_mask);
-	count_cycles = GET_COUNT_CYCLES(unit_mask);
-	polarity = GET_POLARITY(unit_mask);
-	input_control = GET_INPUT_CONTROL(unit_mask);
-	signal_bit = (event % 100);
-
-	p = &(pm_signal[ctr]);
-
-	p->signal_group = event / 100;
-	p->bus_word = bus_word;
-	p->sub_unit = GET_SUB_UNIT(unit_mask);
-
-	pm_regs.pm07_cntrl[ctr] = 0;
-	pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles);
-	pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity);
-	pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control);
-
-	/*
-	 * Some of the islands signal selection is based on 64 bit words.
-	 * The debug bus words are 32 bits, the input words to the performance
-	 * counters are defined as 32 bits.  Need to convert the 64 bit island
-	 * specification to the appropriate 32 input bit and bus word for the
-	 * performance counter event selection.	 See the CELL Performance
-	 * monitoring signals manual and the Perf cntr hardware descriptions
-	 * for the details.
-	 */
-	if (input_control == 0) {
-		if (signal_bit > 31) {
-			signal_bit -= 32;
-			if (bus_word == 0x3)
-				bus_word = 0x2;
-			else if (bus_word == 0xc)
-				bus_word = 0x8;
-		}
-
-		if ((bus_type == 0) && p->signal_group >= 60)
-			bus_type = 2;
-		if ((bus_type == 1) && p->signal_group >= 50)
-			bus_type = 0;
-
-		pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_MUX(signal_bit);
-	} else {
-		pm_regs.pm07_cntrl[ctr] = 0;
-		p->bit = signal_bit;
-	}
-
-	for (i = 0; i < NUM_DEBUG_BUS_WORDS; i++) {
-		if (bus_word & (1 << i)) {
-			pm_regs.debug_bus_control |=
-				(bus_type << (30 - (2 * i)));
-
-			for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) {
-				if (input_bus[j] == 0xff) {
-					input_bus[j] = i;
-					pm_regs.group_control |=
-						(i << (30 - (2 * j)));
-
-					break;
-				}
-			}
-		}
-	}
-out:
-	;
-}
-
-static void write_pm_cntrl(int cpu)
-{
-	/*
-	 * Oprofile will use 32 bit counters, set bits 7:10 to 0
-	 * pmregs.pm_cntrl is a global
-	 */
-
-	u32 val = 0;
-	if (pm_regs.pm_cntrl.enable == 1)
-		val |= CBE_PM_ENABLE_PERF_MON;
-
-	if (pm_regs.pm_cntrl.stop_at_max == 1)
-		val |= CBE_PM_STOP_AT_MAX;
-
-	if (pm_regs.pm_cntrl.trace_mode != 0)
-		val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode);
-
-	if (pm_regs.pm_cntrl.trace_buf_ovflw == 1)
-		val |= CBE_PM_TRACE_BUF_OVFLW(pm_regs.pm_cntrl.trace_buf_ovflw);
-	if (pm_regs.pm_cntrl.freeze == 1)
-		val |= CBE_PM_FREEZE_ALL_CTRS;
-
-	val |= CBE_PM_SPU_ADDR_TRACE_SET(pm_regs.pm_cntrl.spu_addr_trace);
-
-	/*
-	 * Routine set_count_mode must be called previously to set
-	 * the count mode based on the user selection of user and kernel.
-	 */
-	val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode);
-	cbe_write_pm(cpu, pm_control, val);
-}
-
-static inline void
-set_count_mode(u32 kernel, u32 user)
-{
-	/*
-	 * The user must specify user and kernel if they want them. If
-	 *  neither is specified, OProfile will count in hypervisor mode.
-	 *  pm_regs.pm_cntrl is a global
-	 */
-	if (kernel) {
-		if (user)
-			pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES;
-		else
-			pm_regs.pm_cntrl.count_mode =
-				CBE_COUNT_SUPERVISOR_MODE;
-	} else {
-		if (user)
-			pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE;
-		else
-			pm_regs.pm_cntrl.count_mode =
-				CBE_COUNT_HYPERVISOR_MODE;
-	}
-}
-
-static inline void enable_ctr(u32 cpu, u32 ctr, u32 *pm07_cntrl)
-{
-
-	pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE;
-	cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]);
-}
-
-/*
- * Oprofile is expected to collect data on all CPUs simultaneously.
- * However, there is one set of performance counters per node.	There are
- * two hardware threads or virtual CPUs on each node.  Hence, OProfile must
- * multiplex in time the performance counter collection on the two virtual
- * CPUs.  The multiplexing of the performance counters is done by this
- * virtual counter routine.
- *
- * The pmc_values used below is defined as 'per-cpu' but its use is
- * more akin to 'per-node'.  We need to store two sets of counter
- * values per node -- one for the previous run and one for the next.
- * The per-cpu[NR_PHYS_CTRS] gives us the storage we need.  Each odd/even
- * pair of per-cpu arrays is used for storing the previous and next
- * pmc values for a given node.
- * NOTE: We use the per-cpu variable to improve cache performance.
- *
- * This routine will alternate loading the virtual counters for
- * virtual CPUs
- */
-static void cell_virtual_cntr(struct timer_list *unused)
-{
-	int i, prev_hdw_thread, next_hdw_thread;
-	u32 cpu;
-	unsigned long flags;
-
-	/*
-	 * Make sure that the interrupt_hander and the virt counter are
-	 * not both playing with the counters on the same node.
-	 */
-
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	prev_hdw_thread = hdw_thread;
-
-	/* switch the cpu handling the interrupts */
-	hdw_thread = 1 ^ hdw_thread;
-	next_hdw_thread = hdw_thread;
-
-	pm_regs.group_control = 0;
-	pm_regs.debug_bus_control = 0;
-
-	for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
-		input_bus[i] = 0xff;
-
-	/*
-	 * There are some per thread events.  Must do the
-	 * set event, for the thread that is being started
-	 */
-	for (i = 0; i < num_counters; i++)
-		set_pm_event(i,
-			pmc_cntrl[next_hdw_thread][i].evnts,
-			pmc_cntrl[next_hdw_thread][i].masks);
-
-	/*
-	 * The following is done only once per each node, but
-	 * we need cpu #, not node #, to pass to the cbe_xxx functions.
-	 */
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		/*
-		 * stop counters, save counter values, restore counts
-		 * for previous thread
-		 */
-		cbe_disable_pm(cpu);
-		cbe_disable_pm_interrupts(cpu);
-		for (i = 0; i < num_counters; i++) {
-			per_cpu(pmc_values, cpu + prev_hdw_thread)[i]
-				= cbe_read_ctr(cpu, i);
-
-			if (per_cpu(pmc_values, cpu + next_hdw_thread)[i]
-			    == 0xFFFFFFFF)
-				/* If the cntr value is 0xffffffff, we must
-				 * reset that to 0xfffffff0 when the current
-				 * thread is restarted.	 This will generate a
-				 * new interrupt and make sure that we never
-				 * restore the counters to the max value.  If
-				 * the counters were restored to the max value,
-				 * they do not increment and no interrupts are
-				 * generated.  Hence no more samples will be
-				 * collected on that cpu.
-				 */
-				cbe_write_ctr(cpu, i, 0xFFFFFFF0);
-			else
-				cbe_write_ctr(cpu, i,
-					      per_cpu(pmc_values,
-						      cpu +
-						      next_hdw_thread)[i]);
-		}
-
-		/*
-		 * Switch to the other thread. Change the interrupt
-		 * and control regs to be scheduled on the CPU
-		 * corresponding to the thread to execute.
-		 */
-		for (i = 0; i < num_counters; i++) {
-			if (pmc_cntrl[next_hdw_thread][i].enabled) {
-				/*
-				 * There are some per thread events.
-				 * Must do the set event, enable_cntr
-				 * for each cpu.
-				 */
-				enable_ctr(cpu, i,
-					   pm_regs.pm07_cntrl);
-			} else {
-				cbe_write_pm07_control(cpu, i, 0);
-			}
-		}
-
-		/* Enable interrupts on the CPU thread that is starting */
-		cbe_enable_pm_interrupts(cpu, next_hdw_thread,
-					 virt_cntr_inter_mask);
-		cbe_enable_pm(cpu);
-	}
-
-	spin_unlock_irqrestore(&cntr_lock, flags);
-
-	mod_timer(&timer_virt_cntr, jiffies + HZ / 10);
-}
-
-static void start_virt_cntrs(void)
-{
-	timer_setup(&timer_virt_cntr, cell_virtual_cntr, 0);
-	timer_virt_cntr.expires = jiffies + HZ / 10;
-	add_timer(&timer_virt_cntr);
-}
-
-static int cell_reg_setup_spu_cycles(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	spu_cycle_reset = ctr[0].count;
-
-	/*
-	 * Each node will need to make the rtas call to start
-	 * and stop SPU profiling.  Get the token once and store it.
-	 */
-	spu_rtas_token = rtas_token("ibm,cbe-spu-perftools");
-
-	if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
-		printk(KERN_ERR
-		       "%s: rtas token ibm,cbe-spu-perftools unknown\n",
-		       __func__);
-		return -EIO;
-	}
-	return 0;
-}
-
-/* Unfortunately, the hardware will only support event profiling
- * on one SPU per node at a time.  Therefore, we must time slice
- * the profiling across all SPUs in the node.  Note, we do this
- * in parallel for each node.  The following routine is called
- * periodically based on kernel timer to switch which SPU is
- * being monitored in a round robbin fashion.
- */
-static void spu_evnt_swap(struct timer_list *unused)
-{
-	int node;
-	int cur_phys_spu, nxt_phys_spu, cur_spu_evnt_phys_spu_indx;
-	unsigned long flags;
-	int cpu;
-	int ret;
-	u32 interrupt_mask;
-
-
-	/* enable interrupts on cntr 0 */
-	interrupt_mask = CBE_PM_CTR_OVERFLOW_INTR(0);
-
-	hdw_thread = 0;
-
-	/* Make sure spu event interrupt handler and spu event swap
-	 * don't access the counters simultaneously.
-	 */
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	cur_spu_evnt_phys_spu_indx = spu_evnt_phys_spu_indx;
-
-	if (++(spu_evnt_phys_spu_indx) == NUM_SPUS_PER_NODE)
-		spu_evnt_phys_spu_indx = 0;
-
-	pm_signal[0].sub_unit = spu_evnt_phys_spu_indx;
-	pm_signal[1].sub_unit = spu_evnt_phys_spu_indx;
-	pm_signal[2].sub_unit = spu_evnt_phys_spu_indx;
-
-	/* switch the SPU being profiled on each node */
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		node = cbe_cpu_to_node(cpu);
-		cur_phys_spu = (node * NUM_SPUS_PER_NODE)
-			+ cur_spu_evnt_phys_spu_indx;
-		nxt_phys_spu = (node * NUM_SPUS_PER_NODE)
-			+ spu_evnt_phys_spu_indx;
-
-		/*
-		 * stop counters, save counter values, restore counts
-		 * for previous physical SPU
-		 */
-		cbe_disable_pm(cpu);
-		cbe_disable_pm_interrupts(cpu);
-
-		spu_pm_cnt[cur_phys_spu]
-			= cbe_read_ctr(cpu, 0);
-
-		/* restore previous count for the next spu to sample */
-		/* NOTE, hardware issue, counter will not start if the
-		 * counter value is at max (0xFFFFFFFF).
-		 */
-		if (spu_pm_cnt[nxt_phys_spu] >= 0xFFFFFFFF)
-			cbe_write_ctr(cpu, 0, 0xFFFFFFF0);
-		 else
-			 cbe_write_ctr(cpu, 0, spu_pm_cnt[nxt_phys_spu]);
-
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-
-		/* setup the debug bus measure the one event and
-		 * the two events to route the next SPU's PC on
-		 * the debug bus
-		 */
-		ret = pm_rtas_activate_signals(cbe_cpu_to_node(cpu), 3);
-		if (ret)
-			printk(KERN_ERR "%s: pm_rtas_activate_signals failed, "
-			       "SPU event swap\n", __func__);
-
-		/* clear the trace buffer, don't want to take PC for
-		 * previous SPU*/
-		cbe_write_pm(cpu, trace_address, 0);
-
-		enable_ctr(cpu, 0, pm_regs.pm07_cntrl);
-
-		/* Enable interrupts on the CPU thread that is starting */
-		cbe_enable_pm_interrupts(cpu, hdw_thread,
-					 interrupt_mask);
-		cbe_enable_pm(cpu);
-	}
-
-	spin_unlock_irqrestore(&cntr_lock, flags);
-
-	/* swap approximately every 0.1 seconds */
-	mod_timer(&timer_spu_event_swap, jiffies + HZ / 25);
-}
-
-static void start_spu_event_swap(void)
-{
-	timer_setup(&timer_spu_event_swap, spu_evnt_swap, 0);
-	timer_spu_event_swap.expires = jiffies + HZ / 25;
-	add_timer(&timer_spu_event_swap);
-}
-
-static int cell_reg_setup_spu_events(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	int i;
-
-	/* routine is called once for all nodes */
-
-	spu_evnt_phys_spu_indx = 0;
-	/*
-	 * For all events except PPU CYCLEs, each node will need to make
-	 * the rtas cbe-perftools call to setup and reset the debug bus.
-	 * Make the token lookup call once and store it in the global
-	 * variable pm_rtas_token.
-	 */
-	pm_rtas_token = rtas_token("ibm,cbe-perftools");
-
-	if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
-		printk(KERN_ERR
-		       "%s: rtas token ibm,cbe-perftools unknown\n",
-		       __func__);
-		return -EIO;
-	}
-
-	/* setup the pm_control register settings,
-	 * settings will be written per node by the
-	 * cell_cpu_setup() function.
-	 */
-	pm_regs.pm_cntrl.trace_buf_ovflw = 1;
-
-	/* Use the occurrence trace mode to have SPU PC saved
-	 * to the trace buffer.  Occurrence data in trace buffer
-	 * is not used.  Bit 2 must be set to store SPU addresses.
-	 */
-	pm_regs.pm_cntrl.trace_mode = 2;
-
-	pm_regs.pm_cntrl.spu_addr_trace = 0x1;  /* using debug bus
-						   event 2 & 3 */
-
-	/* setup the debug bus event array with the SPU PC routing events.
-	*  Note, pm_signal[0] will be filled in by set_pm_event() call below.
-	*/
-	pm_signal[1].signal_group = SPU_PROFILE_EVENT_ADDR / 100;
-	pm_signal[1].bus_word = GET_BUS_WORD(SPU_PROFILE_EVENT_ADDR_MASK_A);
-	pm_signal[1].bit = SPU_PROFILE_EVENT_ADDR % 100;
-	pm_signal[1].sub_unit = spu_evnt_phys_spu_indx;
-
-	pm_signal[2].signal_group = SPU_PROFILE_EVENT_ADDR / 100;
-	pm_signal[2].bus_word = GET_BUS_WORD(SPU_PROFILE_EVENT_ADDR_MASK_B);
-	pm_signal[2].bit = SPU_PROFILE_EVENT_ADDR % 100;
-	pm_signal[2].sub_unit = spu_evnt_phys_spu_indx;
-
-	/* Set the user selected spu event to profile on,
-	 * note, only one SPU profiling event is supported
-	 */
-	num_counters = 1;  /* Only support one SPU event at a time */
-	set_pm_event(0, ctr[0].event, ctr[0].unit_mask);
-
-	reset_value[0] = 0xFFFFFFFF - ctr[0].count;
-
-	/* global, used by cell_cpu_setup */
-	ctr_enabled |= 1;
-
-	/* Initialize the count for each SPU to the reset value */
-	for (i=0; i < MAX_NUMNODES * NUM_SPUS_PER_NODE; i++)
-		spu_pm_cnt[i] = reset_value[0];
-
-	return 0;
-}
-
-static int cell_reg_setup_ppu(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	/* routine is called once for all nodes */
-	int i, j, cpu;
-
-	num_counters = num_ctrs;
-
-	if (unlikely(num_ctrs > NR_PHYS_CTRS)) {
-		printk(KERN_ERR
-		       "%s: Oprofile, number of specified events " \
-		       "exceeds number of physical counters\n",
-		       __func__);
-		return -EIO;
-	}
-
-	set_count_mode(sys->enable_kernel, sys->enable_user);
-
-	/* Setup the thread 0 events */
-	for (i = 0; i < num_ctrs; ++i) {
-
-		pmc_cntrl[0][i].evnts = ctr[i].event;
-		pmc_cntrl[0][i].masks = ctr[i].unit_mask;
-		pmc_cntrl[0][i].enabled = ctr[i].enabled;
-		pmc_cntrl[0][i].vcntr = i;
-
-		for_each_possible_cpu(j)
-			per_cpu(pmc_values, j)[i] = 0;
-	}
-
-	/*
-	 * Setup the thread 1 events, map the thread 0 event to the
-	 * equivalent thread 1 event.
-	 */
-	for (i = 0; i < num_ctrs; ++i) {
-		if ((ctr[i].event >= 2100) && (ctr[i].event <= 2111))
-			pmc_cntrl[1][i].evnts = ctr[i].event + 19;
-		else if (ctr[i].event == 2203)
-			pmc_cntrl[1][i].evnts = ctr[i].event;
-		else if ((ctr[i].event >= 2200) && (ctr[i].event <= 2215))
-			pmc_cntrl[1][i].evnts = ctr[i].event + 16;
-		else
-			pmc_cntrl[1][i].evnts = ctr[i].event;
-
-		pmc_cntrl[1][i].masks = ctr[i].unit_mask;
-		pmc_cntrl[1][i].enabled = ctr[i].enabled;
-		pmc_cntrl[1][i].vcntr = i;
-	}
-
-	for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
-		input_bus[i] = 0xff;
-
-	/*
-	 * Our counters count up, and "count" refers to
-	 * how much before the next interrupt, and we interrupt
-	 * on overflow.	 So we calculate the starting value
-	 * which will give us "count" until overflow.
-	 * Then we set the events on the enabled counters.
-	 */
-	for (i = 0; i < num_counters; ++i) {
-		/* start with virtual counter set 0 */
-		if (pmc_cntrl[0][i].enabled) {
-			/* Using 32bit counters, reset max - count */
-			reset_value[i] = 0xFFFFFFFF - ctr[i].count;
-			set_pm_event(i,
-				     pmc_cntrl[0][i].evnts,
-				     pmc_cntrl[0][i].masks);
-
-			/* global, used by cell_cpu_setup */
-			ctr_enabled |= (1 << i);
-		}
-	}
-
-	/* initialize the previous counts for the virtual cntrs */
-	for_each_online_cpu(cpu)
-		for (i = 0; i < num_counters; ++i) {
-			per_cpu(pmc_values, cpu)[i] = reset_value[i];
-		}
-
-	return 0;
-}
-
-
-/* This function is called once for all cpus combined */
-static int cell_reg_setup(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	int ret=0;
-	spu_cycle_reset = 0;
-
-	/* initialize the spu_arr_trace value, will be reset if
-	 * doing spu event profiling.
-	 */
-	pm_regs.group_control = 0;
-	pm_regs.debug_bus_control = 0;
-	pm_regs.pm_cntrl.stop_at_max = 1;
-	pm_regs.pm_cntrl.trace_mode = 0;
-	pm_regs.pm_cntrl.freeze = 1;
-	pm_regs.pm_cntrl.trace_buf_ovflw = 0;
-	pm_regs.pm_cntrl.spu_addr_trace = 0;
-
-	/*
-	 * For all events except PPU CYCLEs, each node will need to make
-	 * the rtas cbe-perftools call to setup and reset the debug bus.
-	 * Make the token lookup call once and store it in the global
-	 * variable pm_rtas_token.
-	 */
-	pm_rtas_token = rtas_token("ibm,cbe-perftools");
-
-	if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
-		printk(KERN_ERR
-		       "%s: rtas token ibm,cbe-perftools unknown\n",
-		       __func__);
-		return -EIO;
-	}
-
-	if (ctr[0].event == SPU_CYCLES_EVENT_NUM) {
-		profiling_mode = SPU_PROFILING_CYCLES;
-		ret = cell_reg_setup_spu_cycles(ctr, sys, num_ctrs);
-	} else if ((ctr[0].event >= SPU_EVENT_NUM_START) &&
-		   (ctr[0].event <= SPU_EVENT_NUM_STOP)) {
-		profiling_mode = SPU_PROFILING_EVENTS;
-		spu_cycle_reset = ctr[0].count;
-
-		/* for SPU event profiling, need to setup the
-		 * pm_signal array with the events to route the
-		 * SPU PC before making the FW call.  Note, only
-		 * one SPU event for profiling can be specified
-		 * at a time.
-		 */
-		cell_reg_setup_spu_events(ctr, sys, num_ctrs);
-	} else {
-		profiling_mode = PPU_PROFILING;
-		ret = cell_reg_setup_ppu(ctr, sys, num_ctrs);
-	}
-
-	return ret;
-}
-
-
-
-/* This function is called once for each cpu */
-static int cell_cpu_setup(struct op_counter_config *cntr)
-{
-	u32 cpu = smp_processor_id();
-	u32 num_enabled = 0;
-	int i;
-	int ret;
-
-	/* Cycle based SPU profiling does not use the performance
-	 * counters.  The trace array is configured to collect
-	 * the data.
-	 */
-	if (profiling_mode == SPU_PROFILING_CYCLES)
-		return 0;
-
-	/* There is one performance monitor per processor chip (i.e. node),
-	 * so we only need to perform this function once per node.
-	 */
-	if (cbe_get_hw_thread_id(cpu))
-		return 0;
-
-	/* Stop all counters */
-	cbe_disable_pm(cpu);
-	cbe_disable_pm_interrupts(cpu);
-
-	cbe_write_pm(cpu, pm_start_stop, 0);
-	cbe_write_pm(cpu, group_control, pm_regs.group_control);
-	cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control);
-	write_pm_cntrl(cpu);
-
-	for (i = 0; i < num_counters; ++i) {
-		if (ctr_enabled & (1 << i)) {
-			pm_signal[num_enabled].cpu = cbe_cpu_to_node(cpu);
-			num_enabled++;
-		}
-	}
-
-	/*
-	 * The pm_rtas_activate_signals will return -EIO if the FW
-	 * call failed.
-	 */
-	if (profiling_mode == SPU_PROFILING_EVENTS) {
-		/* For SPU event profiling also need to setup the
-		 * pm interval timer
-		 */
-		ret = pm_rtas_activate_signals(cbe_cpu_to_node(cpu),
-					       num_enabled+2);
-		/* store PC from debug bus to Trace buffer as often
-		 * as possible (every 10 cycles)
-		 */
-		cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC);
-		return ret;
-	} else
-		return pm_rtas_activate_signals(cbe_cpu_to_node(cpu),
-						num_enabled);
-}
-
-#define ENTRIES	 303
-#define MAXLFSR	 0xFFFFFF
-
-/* precomputed table of 24 bit LFSR values */
-static int initial_lfsr[] = {
- 8221349, 12579195, 5379618, 10097839, 7512963, 7519310, 3955098, 10753424,
- 15507573, 7458917, 285419, 2641121, 9780088, 3915503, 6668768, 1548716,
- 4885000, 8774424, 9650099, 2044357, 2304411, 9326253, 10332526, 4421547,
- 3440748, 10179459, 13332843, 10375561, 1313462, 8375100, 5198480, 6071392,
- 9341783, 1526887, 3985002, 1439429, 13923762, 7010104, 11969769, 4547026,
- 2040072, 4025602, 3437678, 7939992, 11444177, 4496094, 9803157, 10745556,
- 3671780, 4257846, 5662259, 13196905, 3237343, 12077182, 16222879, 7587769,
- 14706824, 2184640, 12591135, 10420257, 7406075, 3648978, 11042541, 15906893,
- 11914928, 4732944, 10695697, 12928164, 11980531, 4430912, 11939291, 2917017,
- 6119256, 4172004, 9373765, 8410071, 14788383, 5047459, 5474428, 1737756,
- 15967514, 13351758, 6691285, 8034329, 2856544, 14394753, 11310160, 12149558,
- 7487528, 7542781, 15668898, 12525138, 12790975, 3707933, 9106617, 1965401,
- 16219109, 12801644, 2443203, 4909502, 8762329, 3120803, 6360315, 9309720,
- 15164599, 10844842, 4456529, 6667610, 14924259, 884312, 6234963, 3326042,
- 15973422, 13919464, 5272099, 6414643, 3909029, 2764324, 5237926, 4774955,
- 10445906, 4955302, 5203726, 10798229, 11443419, 2303395, 333836, 9646934,
- 3464726, 4159182, 568492, 995747, 10318756, 13299332, 4836017, 8237783,
- 3878992, 2581665, 11394667, 5672745, 14412947, 3159169, 9094251, 16467278,
- 8671392, 15230076, 4843545, 7009238, 15504095, 1494895, 9627886, 14485051,
- 8304291, 252817, 12421642, 16085736, 4774072, 2456177, 4160695, 15409741,
- 4902868, 5793091, 13162925, 16039714, 782255, 11347835, 14884586, 366972,
- 16308990, 11913488, 13390465, 2958444, 10340278, 1177858, 1319431, 10426302,
- 2868597, 126119, 5784857, 5245324, 10903900, 16436004, 3389013, 1742384,
- 14674502, 10279218, 8536112, 10364279, 6877778, 14051163, 1025130, 6072469,
- 1988305, 8354440, 8216060, 16342977, 13112639, 3976679, 5913576, 8816697,
- 6879995, 14043764, 3339515, 9364420, 15808858, 12261651, 2141560, 5636398,
- 10345425, 10414756, 781725, 6155650, 4746914, 5078683, 7469001, 6799140,
- 10156444, 9667150, 10116470, 4133858, 2121972, 1124204, 1003577, 1611214,
- 14304602, 16221850, 13878465, 13577744, 3629235, 8772583, 10881308, 2410386,
- 7300044, 5378855, 9301235, 12755149, 4977682, 8083074, 10327581, 6395087,
- 9155434, 15501696, 7514362, 14520507, 15808945, 3244584, 4741962, 9658130,
- 14336147, 8654727, 7969093, 15759799, 14029445, 5038459, 9894848, 8659300,
- 13699287, 8834306, 10712885, 14753895, 10410465, 3373251, 309501, 9561475,
- 5526688, 14647426, 14209836, 5339224, 207299, 14069911, 8722990, 2290950,
- 3258216, 12505185, 6007317, 9218111, 14661019, 10537428, 11731949, 9027003,
- 6641507, 9490160, 200241, 9720425, 16277895, 10816638, 1554761, 10431375,
- 7467528, 6790302, 3429078, 14633753, 14428997, 11463204, 3576212, 2003426,
- 6123687, 820520, 9992513, 15784513, 5778891, 6428165, 8388607
-};
-
-/*
- * The hardware uses an LFSR counting sequence to determine when to capture
- * the SPU PCs.	 An LFSR sequence is like a puesdo random number sequence
- * where each number occurs once in the sequence but the sequence is not in
- * numerical order. The SPU PC capture is done when the LFSR sequence reaches
- * the last value in the sequence.  Hence the user specified value N
- * corresponds to the LFSR number that is N from the end of the sequence.
- *
- * To avoid the time to compute the LFSR, a lookup table is used.  The 24 bit
- * LFSR sequence is broken into four ranges.  The spacing of the precomputed
- * values is adjusted in each range so the error between the user specified
- * number (N) of events between samples and the actual number of events based
- * on the precomputed value will be les then about 6.2%.  Note, if the user
- * specifies N < 2^16, the LFSR value that is 2^16 from the end will be used.
- * This is to prevent the loss of samples because the trace buffer is full.
- *
- *	   User specified N		     Step between	   Index in
- *					 precomputed values	 precomputed
- *								    table
- * 0		    to	2^16-1			----		      0
- * 2^16	    to	2^16+2^19-1		2^12		    1 to 128
- * 2^16+2^19	    to	2^16+2^19+2^22-1	2^15		  129 to 256
- * 2^16+2^19+2^22  to	2^24-1			2^18		  257 to 302
- *
- *
- * For example, the LFSR values in the second range are computed for 2^16,
- * 2^16+2^12, ... , 2^19-2^16, 2^19 and stored in the table at indicies
- * 1, 2,..., 127, 128.
- *
- * The 24 bit LFSR value for the nth number in the sequence can be
- * calculated using the following code:
- *
- * #define size 24
- * int calculate_lfsr(int n)
- * {
- *	int i;
- *	unsigned int newlfsr0;
- *	unsigned int lfsr = 0xFFFFFF;
- *	unsigned int howmany = n;
- *
- *	for (i = 2; i < howmany + 2; i++) {
- *		newlfsr0 = (((lfsr >> (size - 1 - 0)) & 1) ^
- *		((lfsr >> (size - 1 - 1)) & 1) ^
- *		(((lfsr >> (size - 1 - 6)) & 1) ^
- *		((lfsr >> (size - 1 - 23)) & 1)));
- *
- *		lfsr >>= 1;
- *		lfsr = lfsr | (newlfsr0 << (size - 1));
- *	}
- *	return lfsr;
- * }
- */
-
-#define V2_16  (0x1 << 16)
-#define V2_19  (0x1 << 19)
-#define V2_22  (0x1 << 22)
-
-static int calculate_lfsr(int n)
-{
-	/*
-	 * The ranges and steps are in powers of 2 so the calculations
-	 * can be done using shifts rather then divide.
-	 */
-	int index;
-
-	if ((n >> 16) == 0)
-		index = 0;
-	else if (((n - V2_16) >> 19) == 0)
-		index = ((n - V2_16) >> 12) + 1;
-	else if (((n - V2_16 - V2_19) >> 22) == 0)
-		index = ((n - V2_16 - V2_19) >> 15 ) + 1 + 128;
-	else if (((n - V2_16 - V2_19 - V2_22) >> 24) == 0)
-		index = ((n - V2_16 - V2_19 - V2_22) >> 18 ) + 1 + 256;
-	else
-		index = ENTRIES-1;
-
-	/* make sure index is valid */
-	if ((index >= ENTRIES) || (index < 0))
-		index = ENTRIES-1;
-
-	return initial_lfsr[index];
-}
-
-static int pm_rtas_activate_spu_profiling(u32 node)
-{
-	int ret, i;
-	struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE];
-
-	/*
-	 * Set up the rtas call to configure the debug bus to
-	 * route the SPU PCs.  Setup the pm_signal for each SPU
-	 */
-	for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) {
-		pm_signal_local[i].cpu = node;
-		pm_signal_local[i].signal_group = 41;
-		/* spu i on word (i/2) */
-		pm_signal_local[i].bus_word = 1 << i / 2;
-		/* spu i */
-		pm_signal_local[i].sub_unit = i;
-		pm_signal_local[i].bit = 63;
-	}
-
-	ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE,
-				     PASSTHRU_ENABLE, pm_signal_local,
-				     (ARRAY_SIZE(pm_signal_local)
-				      * sizeof(struct pm_signal)));
-
-	if (unlikely(ret)) {
-		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __func__, ret);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
-static int
-oprof_cpufreq_notify(struct notifier_block *nb, unsigned long val, void *data)
-{
-	int ret = 0;
-	struct cpufreq_freqs *frq = data;
-	if ((val == CPUFREQ_PRECHANGE && frq->old < frq->new) ||
-	    (val == CPUFREQ_POSTCHANGE && frq->old > frq->new))
-		set_spu_profiling_frequency(frq->new, spu_cycle_reset);
-	return ret;
-}
-
-static struct notifier_block cpu_freq_notifier_block = {
-	.notifier_call	= oprof_cpufreq_notify
-};
-#endif
-
-/*
- * Note the generic OProfile stop calls do not support returning
- * an error on stop.  Hence, will not return an error if the FW
- * calls fail on stop.	Failure to reset the debug bus is not an issue.
- * Failure to disable the SPU profiling is not an issue.  The FW calls
- * to enable the performance counters and debug bus will work even if
- * the hardware was not cleanly reset.
- */
-static void cell_global_stop_spu_cycles(void)
-{
-	int subfunc, rtn_value;
-	unsigned int lfsr_value;
-	int cpu;
-
-	oprofile_running = 0;
-	smp_wmb();
-
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_unregister_notifier(&cpu_freq_notifier_block,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		subfunc = 3;	/*
-				 * 2 - activate SPU tracing,
-				 * 3 - deactivate
-				 */
-		lfsr_value = 0x8f100000;
-
-		rtn_value = rtas_call(spu_rtas_token, 3, 1, NULL,
-				      subfunc, cbe_cpu_to_node(cpu),
-				      lfsr_value);
-
-		if (unlikely(rtn_value != 0)) {
-			printk(KERN_ERR
-			       "%s: rtas call ibm,cbe-spu-perftools " \
-			       "failed, return = %d\n",
-			       __func__, rtn_value);
-		}
-
-		/* Deactivate the signals */
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-	}
-
-	stop_spu_profiling_cycles();
-}
-
-static void cell_global_stop_spu_events(void)
-{
-	int cpu;
-	oprofile_running = 0;
-
-	stop_spu_profiling_events();
-	smp_wmb();
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		cbe_sync_irq(cbe_cpu_to_node(cpu));
-		/* Stop the counters */
-		cbe_disable_pm(cpu);
-		cbe_write_pm07_control(cpu, 0, 0);
-
-		/* Deactivate the signals */
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-
-		/* Deactivate interrupts */
-		cbe_disable_pm_interrupts(cpu);
-	}
-	del_timer_sync(&timer_spu_event_swap);
-}
-
-static void cell_global_stop_ppu(void)
-{
-	int cpu;
-
-	/*
-	 * This routine will be called once for the system.
-	 * There is one performance monitor per node, so we
-	 * only need to perform this function once per node.
-	 */
-	del_timer_sync(&timer_virt_cntr);
-	oprofile_running = 0;
-	smp_wmb();
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		cbe_sync_irq(cbe_cpu_to_node(cpu));
-		/* Stop the counters */
-		cbe_disable_pm(cpu);
-
-		/* Deactivate the signals */
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-
-		/* Deactivate interrupts */
-		cbe_disable_pm_interrupts(cpu);
-	}
-}
-
-static void cell_global_stop(void)
-{
-	if (profiling_mode == PPU_PROFILING)
-		cell_global_stop_ppu();
-	else if (profiling_mode == SPU_PROFILING_EVENTS)
-		cell_global_stop_spu_events();
-	else
-		cell_global_stop_spu_cycles();
-}
-
-static int cell_global_start_spu_cycles(struct op_counter_config *ctr)
-{
-	int subfunc;
-	unsigned int lfsr_value;
-	int cpu;
-	int ret;
-	int rtas_error;
-	unsigned int cpu_khzfreq = 0;
-
-	/* The SPU profiling uses time-based profiling based on
-	 * cpu frequency, so if configured with the CPU_FREQ
-	 * option, we should detect frequency changes and react
-	 * accordingly.
-	 */
-#ifdef CONFIG_CPU_FREQ
-	ret = cpufreq_register_notifier(&cpu_freq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret < 0)
-		/* this is not a fatal error */
-		printk(KERN_ERR "CPU freq change registration failed: %d\n",
-		       ret);
-
-	else
-		cpu_khzfreq = cpufreq_quick_get(smp_processor_id());
-#endif
-
-	set_spu_profiling_frequency(cpu_khzfreq, spu_cycle_reset);
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		/*
-		 * Setup SPU cycle-based profiling.
-		 * Set perf_mon_control bit 0 to a zero before
-		 * enabling spu collection hardware.
-		 */
-		cbe_write_pm(cpu, pm_control, 0);
-
-		if (spu_cycle_reset > MAX_SPU_COUNT)
-			/* use largest possible value */
-			lfsr_value = calculate_lfsr(MAX_SPU_COUNT-1);
-		else
-			lfsr_value = calculate_lfsr(spu_cycle_reset);
-
-		/* must use a non zero value. Zero disables data collection. */
-		if (lfsr_value == 0)
-			lfsr_value = calculate_lfsr(1);
-
-		lfsr_value = lfsr_value << 8; /* shift lfsr to correct
-						* register location
-						*/
-
-		/* debug bus setup */
-		ret = pm_rtas_activate_spu_profiling(cbe_cpu_to_node(cpu));
-
-		if (unlikely(ret)) {
-			rtas_error = ret;
-			goto out;
-		}
-
-
-		subfunc = 2;	/* 2 - activate SPU tracing, 3 - deactivate */
-
-		/* start profiling */
-		ret = rtas_call(spu_rtas_token, 3, 1, NULL, subfunc,
-				cbe_cpu_to_node(cpu), lfsr_value);
-
-		if (unlikely(ret != 0)) {
-			printk(KERN_ERR
-			       "%s: rtas call ibm,cbe-spu-perftools failed, " \
-			       "return = %d\n", __func__, ret);
-			rtas_error = -EIO;
-			goto out;
-		}
-	}
-
-	rtas_error = start_spu_profiling_cycles(spu_cycle_reset);
-	if (rtas_error)
-		goto out_stop;
-
-	oprofile_running = 1;
-	return 0;
-
-out_stop:
-	cell_global_stop_spu_cycles();	/* clean up the PMU/debug bus */
-out:
-	return rtas_error;
-}
-
-static int cell_global_start_spu_events(struct op_counter_config *ctr)
-{
-	int cpu;
-	u32 interrupt_mask = 0;
-	int rtn = 0;
-
-	hdw_thread = 0;
-
-	/* spu event profiling, uses the performance counters to generate
-	 * an interrupt.  The hardware is setup to store the SPU program
-	 * counter into the trace array.  The occurrence mode is used to
-	 * enable storing data to the trace buffer.  The bits are set
-	 * to send/store the SPU address in the trace buffer.  The debug
-	 * bus must be setup to route the SPU program counter onto the
-	 * debug bus.  The occurrence data in the trace buffer is not used.
-	 */
-
-	/* This routine gets called once for the system.
-	 * There is one performance monitor per node, so we
-	 * only need to perform this function once per node.
-	 */
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		/*
-		 * Setup SPU event-based profiling.
-		 * Set perf_mon_control bit 0 to a zero before
-		 * enabling spu collection hardware.
-		 *
-		 * Only support one SPU event on one SPU per node.
-		 */
-		if (ctr_enabled & 1) {
-			cbe_write_ctr(cpu, 0, reset_value[0]);
-			enable_ctr(cpu, 0, pm_regs.pm07_cntrl);
-			interrupt_mask |=
-				CBE_PM_CTR_OVERFLOW_INTR(0);
-		} else {
-			/* Disable counter */
-			cbe_write_pm07_control(cpu, 0, 0);
-		}
-
-		cbe_get_and_clear_pm_interrupts(cpu);
-		cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
-		cbe_enable_pm(cpu);
-
-		/* clear the trace buffer */
-		cbe_write_pm(cpu, trace_address, 0);
-	}
-
-	/* Start the timer to time slice collecting the event profile
-	 * on each of the SPUs.  Note, can collect profile on one SPU
-	 * per node at a time.
-	 */
-	start_spu_event_swap();
-	start_spu_profiling_events();
-	oprofile_running = 1;
-	smp_wmb();
-
-	return rtn;
-}
-
-static int cell_global_start_ppu(struct op_counter_config *ctr)
-{
-	u32 cpu, i;
-	u32 interrupt_mask = 0;
-
-	/* This routine gets called once for the system.
-	 * There is one performance monitor per node, so we
-	 * only need to perform this function once per node.
-	 */
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		interrupt_mask = 0;
-
-		for (i = 0; i < num_counters; ++i) {
-			if (ctr_enabled & (1 << i)) {
-				cbe_write_ctr(cpu, i, reset_value[i]);
-				enable_ctr(cpu, i, pm_regs.pm07_cntrl);
-				interrupt_mask |= CBE_PM_CTR_OVERFLOW_INTR(i);
-			} else {
-				/* Disable counter */
-				cbe_write_pm07_control(cpu, i, 0);
-			}
-		}
-
-		cbe_get_and_clear_pm_interrupts(cpu);
-		cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
-		cbe_enable_pm(cpu);
-	}
-
-	virt_cntr_inter_mask = interrupt_mask;
-	oprofile_running = 1;
-	smp_wmb();
-
-	/*
-	 * NOTE: start_virt_cntrs will result in cell_virtual_cntr() being
-	 * executed which manipulates the PMU.	We start the "virtual counter"
-	 * here so that we do not need to synchronize access to the PMU in
-	 * the above for-loop.
-	 */
-	start_virt_cntrs();
-
-	return 0;
-}
-
-static int cell_global_start(struct op_counter_config *ctr)
-{
-	if (profiling_mode == SPU_PROFILING_CYCLES)
-		return cell_global_start_spu_cycles(ctr);
-	else if (profiling_mode == SPU_PROFILING_EVENTS)
-		return cell_global_start_spu_events(ctr);
-	else
-		return cell_global_start_ppu(ctr);
-}
-
-
-/* The SPU interrupt handler
- *
- * SPU event profiling works as follows:
- * The pm_signal[0] holds the one SPU event to be measured.  It is routed on
- * the debug bus using word 0 or 1.  The value of pm_signal[1] and
- * pm_signal[2] contain the necessary events to route the SPU program
- * counter for the selected SPU onto the debug bus using words 2 and 3.
- * The pm_interval register is setup to write the SPU PC value into the
- * trace buffer at the maximum rate possible.  The trace buffer is configured
- * to store the PCs, wrapping when it is full.  The performance counter is
- * initialized to the max hardware count minus the number of events, N, between
- * samples.  Once the N events have occurred, a HW counter overflow occurs
- * causing the generation of a HW counter interrupt which also stops the
- * writing of the SPU PC values to the trace buffer.  Hence the last PC
- * written to the trace buffer is the SPU PC that we want.  Unfortunately,
- * we have to read from the beginning of the trace buffer to get to the
- * last value written.  We just hope the PPU has nothing better to do then
- * service this interrupt. The PC for the specific SPU being profiled is
- * extracted from the trace buffer processed and stored.  The trace buffer
- * is cleared, interrupts are cleared, the counter is reset to max - N.
- * A kernel timer is used to periodically call the routine spu_evnt_swap()
- * to switch to the next physical SPU in the node to profile in round robbin
- * order.  This way data is collected for all SPUs on the node. It does mean
- * that we need to use a relatively small value of N to ensure enough samples
- * on each SPU are collected each SPU is being profiled 1/8 of the time.
- * It may also be necessary to use a longer sample collection period.
- */
-static void cell_handle_interrupt_spu(struct pt_regs *regs,
-				      struct op_counter_config *ctr)
-{
-	u32 cpu, cpu_tmp;
-	u64 trace_entry;
-	u32 interrupt_mask;
-	u64 trace_buffer[2];
-	u64 last_trace_buffer;
-	u32 sample;
-	u32 trace_addr;
-	unsigned long sample_array_lock_flags;
-	int spu_num;
-	unsigned long flags;
-
-	/* Make sure spu event interrupt handler and spu event swap
-	 * don't access the counters simultaneously.
-	 */
-	cpu = smp_processor_id();
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	cpu_tmp = cpu;
-	cbe_disable_pm(cpu);
-
-	interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu);
-
-	sample = 0xABCDEF;
-	trace_entry = 0xfedcba;
-	last_trace_buffer = 0xdeadbeaf;
-
-	if ((oprofile_running == 1) && (interrupt_mask != 0)) {
-		/* disable writes to trace buff */
-		cbe_write_pm(cpu, pm_interval, 0);
-
-		/* only have one perf cntr being used, cntr 0 */
-		if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(0))
-		    && ctr[0].enabled)
-			/* The SPU PC values will be read
-			 * from the trace buffer, reset counter
-			 */
-
-			cbe_write_ctr(cpu, 0, reset_value[0]);
-
-		trace_addr = cbe_read_pm(cpu, trace_address);
-
-		while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) {
-			/* There is data in the trace buffer to process
-			 * Read the buffer until you get to the last
-			 * entry.  This is the value we want.
-			 */
-
-			cbe_read_trace_buffer(cpu, trace_buffer);
-			trace_addr = cbe_read_pm(cpu, trace_address);
-		}
-
-		/* SPU Address 16 bit count format for 128 bit
-		 * HW trace buffer is used for the SPU PC storage
-		 *    HDR bits          0:15
-		 *    SPU Addr 0 bits   16:31
-		 *    SPU Addr 1 bits   32:47
-		 *    unused bits       48:127
-		 *
-		 * HDR: bit4 = 1 SPU Address 0 valid
-		 * HDR: bit5 = 1 SPU Address 1 valid
-		 *  - unfortunately, the valid bits don't seem to work
-		 *
-		 * Note trace_buffer[0] holds bits 0:63 of the HW
-		 * trace buffer, trace_buffer[1] holds bits 64:127
-		 */
-
-		trace_entry = trace_buffer[0]
-			& 0x00000000FFFF0000;
-
-		/* only top 16 of the 18 bit SPU PC address
-		 * is stored in trace buffer, hence shift right
-		 * by 16 -2 bits */
-		sample = trace_entry >> 14;
-		last_trace_buffer = trace_buffer[0];
-
-		spu_num = spu_evnt_phys_spu_indx
-			+ (cbe_cpu_to_node(cpu) * NUM_SPUS_PER_NODE);
-
-		/* make sure only one process at a time is calling
-		 * spu_sync_buffer()
-		 */
-		spin_lock_irqsave(&oprof_spu_smpl_arry_lck,
-				  sample_array_lock_flags);
-		spu_sync_buffer(spu_num, &sample, 1);
-		spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
-				       sample_array_lock_flags);
-
-		smp_wmb();    /* insure spu event buffer updates are written
-			       * don't want events intermingled... */
-
-		/* The counters were frozen by the interrupt.
-		 * Reenable the interrupt and restart the counters.
-		 */
-		cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC);
-		cbe_enable_pm_interrupts(cpu, hdw_thread,
-					 virt_cntr_inter_mask);
-
-		/* clear the trace buffer, re-enable writes to trace buff */
-		cbe_write_pm(cpu, trace_address, 0);
-		cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC);
-
-		/* The writes to the various performance counters only writes
-		 * to a latch.  The new values (interrupt setting bits, reset
-		 * counter value etc.) are not copied to the actual registers
-		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the performance monitor needs to
-		 * be disabled while writing to the latches.  This is a
-		 * HW design issue.
-		 */
-		write_pm_cntrl(cpu);
-		cbe_enable_pm(cpu);
-	}
-	spin_unlock_irqrestore(&cntr_lock, flags);
-}
-
-static void cell_handle_interrupt_ppu(struct pt_regs *regs,
-				      struct op_counter_config *ctr)
-{
-	u32 cpu;
-	u64 pc;
-	int is_kernel;
-	unsigned long flags = 0;
-	u32 interrupt_mask;
-	int i;
-
-	cpu = smp_processor_id();
-
-	/*
-	 * Need to make sure the interrupt handler and the virt counter
-	 * routine are not running at the same time. See the
-	 * cell_virtual_cntr() routine for additional comments.
-	 */
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	/*
-	 * Need to disable and reenable the performance counters
-	 * to get the desired behavior from the hardware.  This
-	 * is hardware specific.
-	 */
-
-	cbe_disable_pm(cpu);
-
-	interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu);
-
-	/*
-	 * If the interrupt mask has been cleared, then the virt cntr
-	 * has cleared the interrupt.  When the thread that generated
-	 * the interrupt is restored, the data count will be restored to
-	 * 0xffffff0 to cause the interrupt to be regenerated.
-	 */
-
-	if ((oprofile_running == 1) && (interrupt_mask != 0)) {
-		pc = regs->nip;
-		is_kernel = is_kernel_addr(pc);
-
-		for (i = 0; i < num_counters; ++i) {
-			if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i))
-			    && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				cbe_write_ctr(cpu, i, reset_value[i]);
-			}
-		}
-
-		/*
-		 * The counters were frozen by the interrupt.
-		 * Reenable the interrupt and restart the counters.
-		 * If there was a race between the interrupt handler and
-		 * the virtual counter routine.	 The virtual counter
-		 * routine may have cleared the interrupts.  Hence must
-		 * use the virt_cntr_inter_mask to re-enable the interrupts.
-		 */
-		cbe_enable_pm_interrupts(cpu, hdw_thread,
-					 virt_cntr_inter_mask);
-
-		/*
-		 * The writes to the various performance counters only writes
-		 * to a latch.	The new values (interrupt setting bits, reset
-		 * counter value etc.) are not copied to the actual registers
-		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the performance monitor needs to
-		 * be disabled while writing to the latches.  This is a
-		 * HW design issue.
-		 */
-		cbe_enable_pm(cpu);
-	}
-	spin_unlock_irqrestore(&cntr_lock, flags);
-}
-
-static void cell_handle_interrupt(struct pt_regs *regs,
-				  struct op_counter_config *ctr)
-{
-	if (profiling_mode == PPU_PROFILING)
-		cell_handle_interrupt_ppu(regs, ctr);
-	else
-		cell_handle_interrupt_spu(regs, ctr);
-}
-
-/*
- * This function is called from the generic OProfile
- * driver.  When profiling PPUs, we need to do the
- * generic sync start; otherwise, do spu_sync_start.
- */
-static int cell_sync_start(void)
-{
-	if ((profiling_mode == SPU_PROFILING_CYCLES) ||
-	    (profiling_mode == SPU_PROFILING_EVENTS))
-		return spu_sync_start();
-	else
-		return DO_GENERIC_SYNC;
-}
-
-static int cell_sync_stop(void)
-{
-	if ((profiling_mode == SPU_PROFILING_CYCLES) ||
-	    (profiling_mode == SPU_PROFILING_EVENTS))
-		return spu_sync_stop();
-	else
-		return 1;
-}
-
-struct op_powerpc_model op_model_cell = {
-	.reg_setup = cell_reg_setup,
-	.cpu_setup = cell_cpu_setup,
-	.global_start = cell_global_start,
-	.global_stop = cell_global_stop,
-	.sync_start = cell_sync_start,
-	.sync_stop = cell_sync_stop,
-	.handle_interrupt = cell_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
deleted file mode 100644
index 25dc6813ecee..000000000000
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ /dev/null
@@ -1,380 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Freescale Embedded oprofile support, based on ppc64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (c) 2004, 2010 Freescale Semiconductor, Inc
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/reg_fsl_emb.h>
-#include <asm/page.h>
-#include <asm/pmc.h>
-#include <asm/oprofile_impl.h>
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int num_counters;
-static int oprofile_running;
-
-static inline u32 get_pmlca(int ctr)
-{
-	u32 pmlca;
-
-	switch (ctr) {
-		case 0:
-			pmlca = mfpmr(PMRN_PMLCA0);
-			break;
-		case 1:
-			pmlca = mfpmr(PMRN_PMLCA1);
-			break;
-		case 2:
-			pmlca = mfpmr(PMRN_PMLCA2);
-			break;
-		case 3:
-			pmlca = mfpmr(PMRN_PMLCA3);
-			break;
-		case 4:
-			pmlca = mfpmr(PMRN_PMLCA4);
-			break;
-		case 5:
-			pmlca = mfpmr(PMRN_PMLCA5);
-			break;
-		default:
-			panic("Bad ctr number\n");
-	}
-
-	return pmlca;
-}
-
-static inline void set_pmlca(int ctr, u32 pmlca)
-{
-	switch (ctr) {
-		case 0:
-			mtpmr(PMRN_PMLCA0, pmlca);
-			break;
-		case 1:
-			mtpmr(PMRN_PMLCA1, pmlca);
-			break;
-		case 2:
-			mtpmr(PMRN_PMLCA2, pmlca);
-			break;
-		case 3:
-			mtpmr(PMRN_PMLCA3, pmlca);
-			break;
-		case 4:
-			mtpmr(PMRN_PMLCA4, pmlca);
-			break;
-		case 5:
-			mtpmr(PMRN_PMLCA5, pmlca);
-			break;
-		default:
-			panic("Bad ctr number\n");
-	}
-}
-
-static inline unsigned int ctr_read(unsigned int i)
-{
-	switch(i) {
-		case 0:
-			return mfpmr(PMRN_PMC0);
-		case 1:
-			return mfpmr(PMRN_PMC1);
-		case 2:
-			return mfpmr(PMRN_PMC2);
-		case 3:
-			return mfpmr(PMRN_PMC3);
-		case 4:
-			return mfpmr(PMRN_PMC4);
-		case 5:
-			return mfpmr(PMRN_PMC5);
-		default:
-			return 0;
-	}
-}
-
-static inline void ctr_write(unsigned int i, unsigned int val)
-{
-	switch(i) {
-		case 0:
-			mtpmr(PMRN_PMC0, val);
-			break;
-		case 1:
-			mtpmr(PMRN_PMC1, val);
-			break;
-		case 2:
-			mtpmr(PMRN_PMC2, val);
-			break;
-		case 3:
-			mtpmr(PMRN_PMC3, val);
-			break;
-		case 4:
-			mtpmr(PMRN_PMC4, val);
-			break;
-		case 5:
-			mtpmr(PMRN_PMC5, val);
-			break;
-		default:
-			break;
-	}
-}
-
-
-static void init_pmc_stop(int ctr)
-{
-	u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU |
-			PMLCA_FCM1 | PMLCA_FCM0);
-	u32 pmlcb = 0;
-
-	switch (ctr) {
-		case 0:
-			mtpmr(PMRN_PMLCA0, pmlca);
-			mtpmr(PMRN_PMLCB0, pmlcb);
-			break;
-		case 1:
-			mtpmr(PMRN_PMLCA1, pmlca);
-			mtpmr(PMRN_PMLCB1, pmlcb);
-			break;
-		case 2:
-			mtpmr(PMRN_PMLCA2, pmlca);
-			mtpmr(PMRN_PMLCB2, pmlcb);
-			break;
-		case 3:
-			mtpmr(PMRN_PMLCA3, pmlca);
-			mtpmr(PMRN_PMLCB3, pmlcb);
-			break;
-		case 4:
-			mtpmr(PMRN_PMLCA4, pmlca);
-			mtpmr(PMRN_PMLCB4, pmlcb);
-			break;
-		case 5:
-			mtpmr(PMRN_PMLCA5, pmlca);
-			mtpmr(PMRN_PMLCB5, pmlcb);
-			break;
-		default:
-			panic("Bad ctr number!\n");
-	}
-}
-
-static void set_pmc_event(int ctr, int event)
-{
-	u32 pmlca;
-
-	pmlca = get_pmlca(ctr);
-
-	pmlca = (pmlca & ~PMLCA_EVENT_MASK) |
-		((event << PMLCA_EVENT_SHIFT) &
-		 PMLCA_EVENT_MASK);
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void set_pmc_user_kernel(int ctr, int user, int kernel)
-{
-	u32 pmlca;
-
-	pmlca = get_pmlca(ctr);
-
-	if(user)
-		pmlca &= ~PMLCA_FCU;
-	else
-		pmlca |= PMLCA_FCU;
-
-	if(kernel)
-		pmlca &= ~PMLCA_FCS;
-	else
-		pmlca |= PMLCA_FCS;
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void set_pmc_marked(int ctr, int mark0, int mark1)
-{
-	u32 pmlca = get_pmlca(ctr);
-
-	if(mark0)
-		pmlca &= ~PMLCA_FCM0;
-	else
-		pmlca |= PMLCA_FCM0;
-
-	if(mark1)
-		pmlca &= ~PMLCA_FCM1;
-	else
-		pmlca |= PMLCA_FCM1;
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void pmc_start_ctr(int ctr, int enable)
-{
-	u32 pmlca = get_pmlca(ctr);
-
-	pmlca &= ~PMLCA_FC;
-
-	if (enable)
-		pmlca |= PMLCA_CE;
-	else
-		pmlca &= ~PMLCA_CE;
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void pmc_start_ctrs(int enable)
-{
-	u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
-	pmgc0 &= ~PMGC0_FAC;
-	pmgc0 |= PMGC0_FCECE;
-
-	if (enable)
-		pmgc0 |= PMGC0_PMIE;
-	else
-		pmgc0 &= ~PMGC0_PMIE;
-
-	mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-static void pmc_stop_ctrs(void)
-{
-	u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
-	pmgc0 |= PMGC0_FAC;
-
-	pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE);
-
-	mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
-{
-	int i;
-
-	/* freeze all counters */
-	pmc_stop_ctrs();
-
-	for (i = 0;i < num_counters;i++) {
-		init_pmc_stop(i);
-
-		set_pmc_event(i, ctr[i].event);
-
-		set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
-	}
-
-	return 0;
-}
-
-static int fsl_emb_reg_setup(struct op_counter_config *ctr,
-			     struct op_system_config *sys,
-			     int num_ctrs)
-{
-	int i;
-
-	num_counters = num_ctrs;
-
-	/* Our counters count up, and "count" refers to
-	 * how much before the next interrupt, and we interrupt
-	 * on overflow.  So we calculate the starting value
-	 * which will give us "count" until overflow.
-	 * Then we set the events on the enabled counters */
-	for (i = 0; i < num_counters; ++i)
-		reset_value[i] = 0x80000000UL - ctr[i].count;
-
-	return 0;
-}
-
-static int fsl_emb_start(struct op_counter_config *ctr)
-{
-	int i;
-
-	mtmsr(mfmsr() | MSR_PMM);
-
-	for (i = 0; i < num_counters; ++i) {
-		if (ctr[i].enabled) {
-			ctr_write(i, reset_value[i]);
-			/* Set each enabled counter to only
-			 * count when the Mark bit is *not* set */
-			set_pmc_marked(i, 1, 0);
-			pmc_start_ctr(i, 1);
-		} else {
-			ctr_write(i, 0);
-
-			/* Set the ctr to be stopped */
-			pmc_start_ctr(i, 0);
-		}
-	}
-
-	/* Clear the freeze bit, and enable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PMM bit */
-	pmc_start_ctrs(1);
-
-	oprofile_running = 1;
-
-	pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
-			mfpmr(PMRN_PMGC0));
-
-	return 0;
-}
-
-static void fsl_emb_stop(void)
-{
-	/* freeze counters */
-	pmc_stop_ctrs();
-
-	oprofile_running = 0;
-
-	pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
-			mfpmr(PMRN_PMGC0));
-
-	mb();
-}
-
-
-static void fsl_emb_handle_interrupt(struct pt_regs *regs,
-				    struct op_counter_config *ctr)
-{
-	unsigned long pc;
-	int is_kernel;
-	int val;
-	int i;
-
-	pc = regs->nip;
-	is_kernel = is_kernel_addr(pc);
-
-	for (i = 0; i < num_counters; ++i) {
-		val = ctr_read(i);
-		if (val < 0) {
-			if (oprofile_running && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				ctr_write(i, reset_value[i]);
-			} else {
-				ctr_write(i, 0);
-			}
-		}
-	}
-
-	/* The freeze bit was set by the interrupt. */
-	/* Clear the freeze bit, and reenable the interrupt.  The
-	 * counters won't actually start until the rfi clears the PMM
-	 * bit.  The PMM bit should not be set until after the interrupt
-	 * is cleared to avoid it getting lost in some hypervisor
-	 * environments.
-	 */
-	mtmsr(mfmsr() | MSR_PMM);
-	pmc_start_ctrs(1);
-}
-
-struct op_powerpc_model op_model_fsl_emb = {
-	.reg_setup		= fsl_emb_reg_setup,
-	.cpu_setup		= fsl_emb_cpu_setup,
-	.start			= fsl_emb_start,
-	.stop			= fsl_emb_stop,
-	.handle_interrupt	= fsl_emb_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c
deleted file mode 100644
index d23061cf76bc..000000000000
--- a/arch/powerpc/oprofile/op_model_pa6t.c
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2006-2007 PA Semi, Inc
- *
- * Author: Shashi Rao, PA Semi
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * Based on arch/powerpc/oprofile/op_model_power4.c
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-#include <asm/reg.h>
-
-static unsigned char oprofile_running;
-
-/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */
-static u64 mmcr0_val;
-static u64 mmcr1_val;
-
-/* inited in pa6t_reg_setup */
-static u64 reset_value[OP_MAX_COUNTER];
-
-static inline u64 ctr_read(unsigned int i)
-{
-	switch (i) {
-	case 0:
-		return mfspr(SPRN_PA6T_PMC0);
-	case 1:
-		return mfspr(SPRN_PA6T_PMC1);
-	case 2:
-		return mfspr(SPRN_PA6T_PMC2);
-	case 3:
-		return mfspr(SPRN_PA6T_PMC3);
-	case 4:
-		return mfspr(SPRN_PA6T_PMC4);
-	case 5:
-		return mfspr(SPRN_PA6T_PMC5);
-	default:
-		printk(KERN_ERR "ctr_read called with bad arg %u\n", i);
-		return 0;
-	}
-}
-
-static inline void ctr_write(unsigned int i, u64 val)
-{
-	switch (i) {
-	case 0:
-		mtspr(SPRN_PA6T_PMC0, val);
-		break;
-	case 1:
-		mtspr(SPRN_PA6T_PMC1, val);
-		break;
-	case 2:
-		mtspr(SPRN_PA6T_PMC2, val);
-		break;
-	case 3:
-		mtspr(SPRN_PA6T_PMC3, val);
-		break;
-	case 4:
-		mtspr(SPRN_PA6T_PMC4, val);
-		break;
-	case 5:
-		mtspr(SPRN_PA6T_PMC5, val);
-		break;
-	default:
-		printk(KERN_ERR "ctr_write called with bad arg %u\n", i);
-		break;
-	}
-}
-
-
-/* precompute the values to stuff in the hardware registers */
-static int pa6t_reg_setup(struct op_counter_config *ctr,
-			   struct op_system_config *sys,
-			   int num_ctrs)
-{
-	int pmc;
-
-	/*
-	 * adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the
-	 * event_mappings file by turning off the counters that the user doesn't
-	 * care about
-	 *
-	 * setup user and kernel profiling
-	 */
-	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++)
-		if (!ctr[pmc].enabled) {
-			sys->mmcr0 &= ~(0x1UL << pmc);
-			sys->mmcr0 &= ~(0x1UL << (pmc+12));
-			pr_debug("turned off counter %u\n", pmc);
-		}
-
-	if (sys->enable_kernel)
-		sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN;
-	else
-		sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN);
-
-	if (sys->enable_user)
-		sys->mmcr0 |= PA6T_MMCR0_PREN;
-	else
-		sys->mmcr0 &= ~PA6T_MMCR0_PREN;
-
-	/*
-	 * The performance counter event settings are given in the mmcr0 and
-	 * mmcr1 values passed from the user in the op_system_config
-	 * structure (sys variable).
-	 */
-	mmcr0_val = sys->mmcr0;
-	mmcr1_val = sys->mmcr1;
-	pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0);
-	pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1);
-
-	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
-		/* counters are 40 bit. Move to cputable at some point? */
-		reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
-		pr_debug("reset_value for pmc%u inited to 0x%llx\n",
-				 pmc, reset_value[pmc]);
-	}
-
-	return 0;
-}
-
-/* configure registers on this cpu */
-static int pa6t_cpu_setup(struct op_counter_config *ctr)
-{
-	u64 mmcr0 = mmcr0_val;
-	u64 mmcr1 = mmcr1_val;
-
-	/* Default is all PMCs off */
-	mmcr0 &= ~(0x3FUL);
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-
-	/* program selected programmable events in */
-	mtspr(SPRN_PA6T_MMCR1, mmcr1);
-
-	pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(),
-		mfspr(SPRN_PA6T_MMCR0));
-	pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(),
-		mfspr(SPRN_PA6T_MMCR1));
-
-	return 0;
-}
-
-static int pa6t_start(struct op_counter_config *ctr)
-{
-	int i;
-
-	/* Hold off event counting until rfid */
-	u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
-		if (ctr[i].enabled)
-			ctr_write(i, reset_value[i]);
-		else
-			ctr_write(i, 0UL);
-
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-
-	oprofile_running = 1;
-
-	pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
-
-	return 0;
-}
-
-static void pa6t_stop(void)
-{
-	u64 mmcr0;
-
-	/* freeze counters */
-	mmcr0 = mfspr(SPRN_PA6T_MMCR0);
-	mmcr0 |= PA6T_MMCR0_FCM0;
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-
-	oprofile_running = 0;
-
-	pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
-}
-
-/* handle the perfmon overflow vector */
-static void pa6t_handle_interrupt(struct pt_regs *regs,
-				  struct op_counter_config *ctr)
-{
-	unsigned long pc = mfspr(SPRN_PA6T_SIAR);
-	int is_kernel = is_kernel_addr(pc);
-	u64 val;
-	int i;
-	u64 mmcr0;
-
-	/* disable perfmon counting until rfid */
-	mmcr0 = mfspr(SPRN_PA6T_MMCR0);
-	mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS);
-
-	/* Record samples. We've got one global bit for whether a sample
-	 * was taken, so add it for any counter that triggered overflow.
-	 */
-	for (i = 0; i < cur_cpu_spec->num_pmcs; i++) {
-		val = ctr_read(i);
-		if (val & (0x1UL << 39)) { /* Overflow bit set */
-			if (oprofile_running && ctr[i].enabled) {
-				if (mmcr0 & PA6T_MMCR0_SIARLOG)
-					oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				ctr_write(i, reset_value[i]);
-			} else {
-				ctr_write(i, 0UL);
-			}
-		}
-	}
-
-	/* Restore mmcr0 to a good known value since the PMI changes it */
-	mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-}
-
-struct op_powerpc_model op_model_pa6t = {
-	.reg_setup		= pa6t_reg_setup,
-	.cpu_setup		= pa6t_cpu_setup,
-	.start			= pa6t_start,
-	.stop			= pa6t_stop,
-	.handle_interrupt	= pa6t_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
deleted file mode 100644
index 2ae6b86ff97b..000000000000
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ /dev/null
@@ -1,438 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- * Added mmcra[slot] support:
- * Copyright (C) 2006-2007 Will Schmidt <willschm@us.ibm.com>, IBM
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/firmware.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/rtas.h>
-#include <asm/oprofile_impl.h>
-#include <asm/reg.h>
-
-#define dbg(args...)
-#define OPROFILE_PM_PMCSEL_MSK      0xffULL
-#define OPROFILE_PM_UNIT_SHIFT      60
-#define OPROFILE_PM_UNIT_MSK        0xfULL
-#define OPROFILE_MAX_PMC_NUM        3
-#define OPROFILE_PMSEL_FIELD_WIDTH  8
-#define OPROFILE_UNIT_FIELD_WIDTH   4
-#define MMCRA_SIAR_VALID_MASK       0x10000000ULL
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int oprofile_running;
-static int use_slot_nums;
-
-/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
-static u32 mmcr0_val;
-static u64 mmcr1_val;
-static u64 mmcra_val;
-static u32 cntr_marked_events;
-
-static int power7_marked_instr_event(u64 mmcr1)
-{
-	u64 psel, unit;
-	int pmc, cntr_marked_events = 0;
-
-	/* Given the MMCR1 value, look at the field for each counter to
-	 * determine if it is a marked event.  Code based on the function
-	 * power7_marked_instr_event() in file arch/powerpc/perf/power7-pmu.c.
-	 */
-	for (pmc = 0; pmc < 4; pmc++) {
-		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
-				<< (OPROFILE_MAX_PMC_NUM - pmc)
-				* OPROFILE_PMSEL_FIELD_WIDTH);
-		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
-				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
-		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
-				<< (OPROFILE_PM_UNIT_SHIFT
-				    - (pmc * OPROFILE_PMSEL_FIELD_WIDTH )));
-		unit = unit >> (OPROFILE_PM_UNIT_SHIFT
-				- (pmc * OPROFILE_PMSEL_FIELD_WIDTH));
-
-		switch (psel >> 4) {
-		case 2:
-			cntr_marked_events |= (pmc == 1 || pmc == 3) << pmc;
-			break;
-		case 3:
-			if (psel == 0x3c) {
-				cntr_marked_events |= (pmc == 0) << pmc;
-				break;
-			}
-
-			if (psel == 0x3e) {
-				cntr_marked_events |= (pmc != 1) << pmc;
-				break;
-			}
-
-			cntr_marked_events |= 1 << pmc;
-			break;
-		case 4:
-		case 5:
-			cntr_marked_events |= (unit == 0xd) << pmc;
-			break;
-		case 6:
-			if (psel == 0x64)
-				cntr_marked_events |= (pmc >= 2) << pmc;
-			break;
-		case 8:
-			cntr_marked_events |= (unit == 0xd) << pmc;
-			break;
-		}
-	}
-	return cntr_marked_events;
-}
-
-static int power4_reg_setup(struct op_counter_config *ctr,
-			     struct op_system_config *sys,
-			     int num_ctrs)
-{
-	int i;
-
-	/*
-	 * The performance counter event settings are given in the mmcr0,
-	 * mmcr1 and mmcra values passed from the user in the
-	 * op_system_config structure (sys variable).
-	 */
-	mmcr0_val = sys->mmcr0;
-	mmcr1_val = sys->mmcr1;
-	mmcra_val = sys->mmcra;
-
-	/* Power 7+ and newer architectures:
-	 * Determine which counter events in the group (the group of events is
-	 * specified by the bit settings in the MMCR1 register) are marked
-	 * events for use in the interrupt handler.  Do the calculation once
-	 * before OProfile starts.  Information is used in the interrupt
-	 * handler.  Starting with Power 7+ we only record the sample for
-	 * marked events if the SIAR valid bit is set.  For non marked events
-	 * the sample is always recorded.
-	 */
-	if (pvr_version_is(PVR_POWER7p))
-		cntr_marked_events = power7_marked_instr_event(mmcr1_val);
-	else
-		cntr_marked_events = 0; /* For older processors, set the bit map
-					 * to zero so the sample will always be
-					 * be recorded.
-					 */
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
-		reset_value[i] = 0x80000000UL - ctr[i].count;
-
-	/* setup user and kernel profiling */
-	if (sys->enable_kernel)
-		mmcr0_val &= ~MMCR0_KERNEL_DISABLE;
-	else
-		mmcr0_val |= MMCR0_KERNEL_DISABLE;
-
-	if (sys->enable_user)
-		mmcr0_val &= ~MMCR0_PROBLEM_DISABLE;
-	else
-		mmcr0_val |= MMCR0_PROBLEM_DISABLE;
-
-	if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
-	    pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
-	    pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX) ||
-	    pvr_version_is(PVR_POWER5) || pvr_version_is(PVR_POWER5p))
-		use_slot_nums = 1;
-
-	return 0;
-}
-
-extern void ppc_enable_pmcs(void);
-
-/*
- * Older CPUs require the MMCRA sample bit to be always set, but newer 
- * CPUs only want it set for some groups. Eventually we will remove all
- * knowledge of this bit in the kernel, oprofile userspace should be
- * setting it when required.
- *
- * In order to keep current installations working we force the bit for
- * those older CPUs. Once everyone has updated their oprofile userspace we
- * can remove this hack.
- */
-static inline int mmcra_must_set_sample(void)
-{
-	if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
-	    pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
-	    pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX))
-		return 1;
-
-	return 0;
-}
-
-static int power4_cpu_setup(struct op_counter_config *ctr)
-{
-	unsigned int mmcr0 = mmcr0_val;
-	unsigned long mmcra = mmcra_val;
-
-	ppc_enable_pmcs();
-
-	/* set the freeze bit */
-	mmcr0 |= MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
-	mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	mtspr(SPRN_MMCR1, mmcr1_val);
-
-	if (mmcra_must_set_sample())
-		mmcra |= MMCRA_SAMPLE_ENABLE;
-	mtspr(SPRN_MMCRA, mmcra);
-
-	dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
-	    mfspr(SPRN_MMCR0));
-	dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
-	    mfspr(SPRN_MMCR1));
-	dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(),
-	    mfspr(SPRN_MMCRA));
-
-	return 0;
-}
-
-static int power4_start(struct op_counter_config *ctr)
-{
-	int i;
-	unsigned int mmcr0;
-
-	/* set the PMM bit (see comment below) */
-	mtmsr(mfmsr() | MSR_PMM);
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
-		if (ctr[i].enabled) {
-			classic_ctr_write(i, reset_value[i]);
-		} else {
-			classic_ctr_write(i, 0);
-		}
-	}
-
-	mmcr0 = mfspr(SPRN_MMCR0);
-
-	/*
-	 * We must clear the PMAO bit on some (GQ) chips. Just do it
-	 * all the time
-	 */
-	mmcr0 &= ~MMCR0_PMAO;
-
-	/*
-	 * now clear the freeze bit, counting will not start until we
-	 * rfid from this excetion, because only at that point will
-	 * the PMM bit be cleared
-	 */
-	mmcr0 &= ~MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	oprofile_running = 1;
-
-	dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-	return 0;
-}
-
-static void power4_stop(void)
-{
-	unsigned int mmcr0;
-
-	/* freeze counters */
-	mmcr0 = mfspr(SPRN_MMCR0);
-	mmcr0 |= MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	oprofile_running = 0;
-
-	dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-
-	mb();
-}
-
-/* Fake functions used by canonicalize_pc */
-static void __used hypervisor_bucket(void)
-{
-}
-
-static void __used rtas_bucket(void)
-{
-}
-
-static void __used kernel_unknown_bucket(void)
-{
-}
-
-/*
- * On GQ and newer the MMCRA stores the HV and PR bits at the time
- * the SIAR was sampled. We use that to work out if the SIAR was sampled in
- * the hypervisor, our exception vectors or RTAS.
- * If the MMCRA_SAMPLE_ENABLE bit is set, we can use the MMCRA[slot] bits
- * to more accurately identify the address of the sampled instruction. The
- * mmcra[slot] bits represent the slot number of a sampled instruction
- * within an instruction group.  The slot will contain a value between 1
- * and 5 if MMCRA_SAMPLE_ENABLE is set, otherwise 0.
- */
-static unsigned long get_pc(struct pt_regs *regs)
-{
-	unsigned long pc = mfspr(SPRN_SIAR);
-	unsigned long mmcra;
-	unsigned long slot;
-
-	/* Can't do much about it */
-	if (!cur_cpu_spec->oprofile_mmcra_sihv)
-		return pc;
-
-	mmcra = mfspr(SPRN_MMCRA);
-
-	if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
-		slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
-		if (slot > 1)
-			pc += 4 * (slot - 1);
-	}
-
-	/* Were we in the hypervisor? */
-	if (firmware_has_feature(FW_FEATURE_LPAR) &&
-	    (mmcra & cur_cpu_spec->oprofile_mmcra_sihv))
-		/* function descriptor madness */
-		return *((unsigned long *)hypervisor_bucket);
-
-	/* We were in userspace, nothing to do */
-	if (mmcra & cur_cpu_spec->oprofile_mmcra_sipr)
-		return pc;
-
-#ifdef CONFIG_PPC_RTAS
-	/* Were we in RTAS? */
-	if (pc >= rtas.base && pc < (rtas.base + rtas.size))
-		/* function descriptor madness */
-		return *((unsigned long *)rtas_bucket);
-#endif
-
-	/* Were we in our exception vectors or SLB real mode miss handler? */
-	if (pc < 0x1000000UL)
-		return (unsigned long)__va(pc);
-
-	/* Not sure where we were */
-	if (!is_kernel_addr(pc))
-		/* function descriptor madness */
-		return *((unsigned long *)kernel_unknown_bucket);
-
-	return pc;
-}
-
-static int get_kernel(unsigned long pc, unsigned long mmcra)
-{
-	int is_kernel;
-
-	if (!cur_cpu_spec->oprofile_mmcra_sihv) {
-		is_kernel = is_kernel_addr(pc);
-	} else {
-		is_kernel = ((mmcra & cur_cpu_spec->oprofile_mmcra_sipr) == 0);
-	}
-
-	return is_kernel;
-}
-
-static bool pmc_overflow(unsigned long val)
-{
-	if ((int)val < 0)
-		return true;
-
-	/*
-	 * Events on POWER7 can roll back if a speculative event doesn't
-	 * eventually complete. Unfortunately in some rare cases they will
-	 * raise a performance monitor exception. We need to catch this to
-	 * ensure we reset the PMC. In all cases the PMC will be 256 or less
-	 * cycles from overflow.
-	 *
-	 * We only do this if the first pass fails to find any overflowing
-	 * PMCs because a user might set a period of less than 256 and we
-	 * don't want to mistakenly reset them.
-	 */
-	if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256))
-		return true;
-
-	return false;
-}
-
-static void power4_handle_interrupt(struct pt_regs *regs,
-				    struct op_counter_config *ctr)
-{
-	unsigned long pc;
-	int is_kernel;
-	int val;
-	int i;
-	unsigned int mmcr0;
-	unsigned long mmcra;
-	bool siar_valid = false;
-
-	mmcra = mfspr(SPRN_MMCRA);
-
-	pc = get_pc(regs);
-	is_kernel = get_kernel(pc, mmcra);
-
-	/* set the PMM bit (see comment below) */
-	mtmsr(mfmsr() | MSR_PMM);
-
-	/* Check that the SIAR  valid bit in MMCRA is set to 1. */
-	if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK)
-		siar_valid = true;
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
-		val = classic_ctr_read(i);
-		if (pmc_overflow(val)) {
-			if (oprofile_running && ctr[i].enabled) {
-				/* Power 7+ and newer architectures:
-				 * If the event is a marked event, then only
-				 * save the sample if the SIAR valid bit is
-				 * set.  If the event is not marked, then
-				 * always save the sample.
-				 * Note, the Sample enable bit in the MMCRA
-				 * register must be set to 1 if the group
-				 * contains a marked event.
-				 */
-				if ((siar_valid &&
-				     (cntr_marked_events & (1 << i)))
-				    || !(cntr_marked_events & (1 << i)))
-					oprofile_add_ext_sample(pc, regs, i,
-								is_kernel);
-
-				classic_ctr_write(i, reset_value[i]);
-			} else {
-				classic_ctr_write(i, 0);
-			}
-		}
-	}
-
-	mmcr0 = mfspr(SPRN_MMCR0);
-
-	/* reset the perfmon trigger */
-	mmcr0 |= MMCR0_PMXE;
-
-	/*
-	 * We must clear the PMAO bit on some (GQ) chips. Just do it
-	 * all the time
-	 */
-	mmcr0 &= ~MMCR0_PMAO;
-
-	/* Clear the appropriate bits in the MMCRA */
-	mmcra &= ~cur_cpu_spec->oprofile_mmcra_clear;
-	mtspr(SPRN_MMCRA, mmcra);
-
-	/*
-	 * now clear the freeze bit, counting will not start until we
-	 * rfid from this exception, because only at that point will
-	 * the PMM bit be cleared
-	 */
-	mmcr0 &= ~MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-}
-
-struct op_powerpc_model op_model_power4 = {
-	.reg_setup		= power4_reg_setup,
-	.cpu_setup		= power4_cpu_setup,
-	.start			= power4_start,
-	.stop			= power4_stop,
-	.handle_interrupt	= power4_handle_interrupt,
-};
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index f2ff359041ee..e7c976bcadff 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -100,8 +100,3 @@ config CBE_CPUFREQ_SPU_GOVERNOR
 	  the minimal possible frequency.
 
 endmenu
-
-config OPROFILE_CELL
-	def_bool y
-	depends on PPC_CELL_NATIVE && (OPROFILE = m || OPROFILE = y) && SPU_BASE
-
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 10064a33ca96..7ea6692f67e2 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -19,7 +19,6 @@ spu-priv1-$(CONFIG_PPC_CELL_COMMON)	+= spu_priv1_mmio.o
 spu-manage-$(CONFIG_PPC_CELL_COMMON)	+= spu_manage.o
 
 obj-$(CONFIG_SPU_BASE)			+= spu_callbacks.o spu_base.o \
-					   spu_notify.o \
 					   spu_syscalls.o \
 					   $(spu-priv1-y) \
 					   $(spu-manage-y) \
diff --git a/arch/powerpc/platforms/cell/spu_notify.c b/arch/powerpc/platforms/cell/spu_notify.c
deleted file mode 100644
index 67870abf3715..000000000000
--- a/arch/powerpc/platforms/cell/spu_notify.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Move OProfile dependencies from spufs module to the kernel so it
- * can run on non-cell PPC.
- *
- * Copyright (C) IBM 2005
- */
-
-#undef DEBUG
-
-#include <linux/export.h>
-#include <linux/notifier.h>
-#include <asm/spu.h>
-#include "spufs/spufs.h"
-
-static BLOCKING_NOTIFIER_HEAD(spu_switch_notifier);
-
-void spu_switch_notify(struct spu *spu, struct spu_context *ctx)
-{
-	blocking_notifier_call_chain(&spu_switch_notifier,
-				     ctx ? ctx->object_id : 0, spu);
-}
-EXPORT_SYMBOL_GPL(spu_switch_notify);
-
-int spu_switch_event_register(struct notifier_block *n)
-{
-	int ret;
-	ret = blocking_notifier_chain_register(&spu_switch_notifier, n);
-	if (!ret)
-		notify_spus_active();
-	return ret;
-}
-EXPORT_SYMBOL_GPL(spu_switch_event_register);
-
-int spu_switch_event_unregister(struct notifier_block *n)
-{
-	return blocking_notifier_chain_unregister(&spu_switch_notifier, n);
-}
-EXPORT_SYMBOL_GPL(spu_switch_event_unregister);
-
-void spu_set_profile_private_kref(struct spu_context *ctx,
-				  struct kref *prof_info_kref,
-				  void (* prof_info_release) (struct kref *kref))
-{
-	ctx->prof_priv_kref = prof_info_kref;
-	ctx->prof_priv_release = prof_info_release;
-}
-EXPORT_SYMBOL_GPL(spu_set_profile_private_kref);
-
-void *spu_get_profile_private_kref(struct spu_context *ctx)
-{
-	return ctx->prof_priv_kref;
-}
-EXPORT_SYMBOL_GPL(spu_get_profile_private_kref);
-
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 3f2380f40f99..ce52b87496d2 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -353,7 +353,6 @@ static int spu_process_callback(struct spu_context *ctx)
 long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 {
 	int ret;
-	struct spu *spu;
 	u32 status;
 
 	if (mutex_lock_interruptible(&ctx->run_mutex))
@@ -386,13 +385,10 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 			mutex_lock(&ctx->state_mutex);
 			break;
 		}
-		spu = ctx->spu;
 		if (unlikely(test_and_clear_bit(SPU_SCHED_NOTIFY_ACTIVE,
 						&ctx->sched_flags))) {
-			if (!(status & SPU_STATUS_STOPPED_BY_STOP)) {
-				spu_switch_notify(spu, ctx);
+			if (!(status & SPU_STATUS_STOPPED_BY_STOP))
 				continue;
-			}
 		}
 
 		spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index f18d5067cd0f..9d06fffb1526 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -181,9 +181,6 @@ void do_notify_spus_active(void)
 
 	/*
 	 * Wake up the active spu_contexts.
-	 *
-	 * When the awakened processes see their "notify_active" flag is set,
-	 * they will call spu_switch_notify().
 	 */
 	for_each_online_node(node) {
 		struct spu *spu;
@@ -239,7 +236,6 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
 	spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
 	spu_restore(&ctx->csa, spu);
 	spu->timestamp = jiffies;
-	spu_switch_notify(spu, ctx);
 	ctx->state = SPU_STATE_RUNNABLE;
 
 	spuctx_switch_state(ctx, SPU_UTIL_USER);
@@ -440,7 +436,6 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
 		 */
 		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
-	spu_switch_notify(spu, NULL);
 	spu_unmap_mappings(ctx);
 	spu_save(&ctx->csa, spu);
 	spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 1ba4d884febf..afc1d6604d12 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -281,7 +281,6 @@ void spu_del_from_rq(struct spu_context *ctx);
 int spu_activate(struct spu_context *ctx, unsigned long flags);
 void spu_deactivate(struct spu_context *ctx);
 void spu_yield(struct spu_context *ctx);
-void spu_switch_notify(struct spu *spu, struct spu_context *ctx);
 void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 		u32 type, u32 val);
 void spu_set_timeslice(struct spu_context *ctx);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 73483614b66b..41d6498dcbaa 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -174,7 +174,6 @@ config S390
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_NOP_MCOUNT
-	select HAVE_OPROFILE
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 8db267d2a543..e443ed9947bd 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -134,9 +134,6 @@ core-y		+= arch/s390/
 libs-y		+= arch/s390/lib/
 drivers-y	+= drivers/s390/
 
-# must be linked after kernel
-drivers-$(CONFIG_OPROFILE)	+= arch/s390/oprofile/
-
 boot		:= arch/s390/boot
 syscalls	:= arch/s390/kernel/syscalls
 tools		:= arch/s390/tools
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index c4f6ff98a612..8b94347705e5 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -57,7 +57,6 @@ CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
 CONFIG_KVM=m
 CONFIG_S390_UNWIND_SELFTEST=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_STATIC_KEYS_SELFTEST=y
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index 51135893cffe..9db1232e09f4 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -55,7 +55,6 @@ CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
 CONFIG_KVM=m
 CONFIG_S390_UNWIND_SELFTEST=m
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 # CONFIG_GCC_PLUGINS is not set
diff --git a/arch/s390/oprofile/Makefile b/arch/s390/oprofile/Makefile
deleted file mode 100644
index 36261f9d360b..000000000000
--- a/arch/s390/oprofile/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o  \
-		timer_int.o )
-
-oprofile-y :=	$(DRIVER_OBJS) init.o
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
deleted file mode 100644
index 7441857df51b..000000000000
--- a/arch/s390/oprofile/init.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * S390 Version
- *   Copyright IBM Corp. 2002, 2011
- *   Author(s): Thomas Spatzier (tspat@de.ibm.com)
- *   Author(s): Mahesh Salgaonkar (mahesh@linux.vnet.ibm.com)
- *   Author(s): Heinz Graalfs (graalfs@linux.vnet.ibm.com)
- *   Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com)
- *
- * @remark Copyright 2002-2011 OProfile authors
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/unwind.h>
-
-static void s390_backtrace(struct pt_regs *regs, unsigned int depth)
-{
-	struct unwind_state state;
-
-	unwind_for_each_frame(&state, current, regs, 0) {
-		if (depth-- == 0)
-			break;
-		oprofile_add_trace(state.ip);
-	}
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	ops->backtrace = s390_backtrace;
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 52646f52f130..7ac847ca6356 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -50,7 +50,6 @@ config SUPERH
 	select HAVE_MIXED_BREAKPOINTS_REGS
 	select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
 	select HAVE_NMI
-	select HAVE_OPROFILE
 	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 2faebfd72eca..3bcbf52fb30e 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -170,7 +170,6 @@ cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
 cpuincdir-y			+= cpu-common	# Must be last
 
 drivers-y			+= arch/sh/drivers/
-drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 cflags-y	+= $(foreach d, $(cpuincdir-y), -I $(srctree)/arch/sh/include/$(d)) \
 		   $(foreach d, $(machdir-y), -I $(srctree)/arch/sh/include/$(d))
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index 9a988c347e9d..2804cb760a76 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -7,7 +7,6 @@ CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index a24cf8cd2cea..4859cd30cfc4 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -6,7 +6,6 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index e922659fdadb..f823cc6b18f9 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -7,7 +7,6 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_EPOLL is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 5978866358ec..f96bc20d4b1a 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 841809b5c2dc..e41526120be1 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -12,7 +12,6 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_AIO is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7201=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 0055031664ad..6af08fa1ddf8 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -13,7 +13,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7203=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index fc9c22152b08..96263a4912b7 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -3,7 +3,6 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7751R=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index ff3fd6787fd6..92e586e6c974 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -3,7 +3,6 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7751R=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index 4a44cac640bc..f776a1d0d277 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -35,7 +35,6 @@ CONFIG_RD_LZO=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index ff5bb4489922..315b04a8dd2f 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -23,7 +23,6 @@ CONFIG_KALLSYMS_ALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 48b457d59e79..ff502683132e 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -5,7 +5,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
index 9adee9010319..2c46c0004780 100644
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -4,7 +4,6 @@ CONFIG_CGROUPS=y
 # CONFIG_UID16 is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
 CONFIG_NO_HZ=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 26c5fd02c87a..8a6a446f9eb8 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -7,7 +7,6 @@ CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
index c17590f0df67..88193153e51b 100644
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ b/arch/sh/configs/sh7770_generic_defconfig
@@ -4,7 +4,6 @@ CONFIG_CGROUPS=y
 # CONFIG_UID16 is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7770=y
 CONFIG_SH_PCLK_FREQ=41666666
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index dc2be2514b62..32ec6eb1eabc 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -22,7 +22,6 @@ CONFIG_PID_NS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
deleted file mode 100644
index d478dd8dac0b..000000000000
--- a/arch/sh/oprofile/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-CFLAGS_common.o	+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-ifeq ($(CONFIG_HW_PERF_EVENTS),y)
-DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o)
-endif
-
-oprofile-y	:= $(DRIVER_OBJS) common.o backtrace.o
diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
deleted file mode 100644
index cc16cf86cd92..000000000000
--- a/arch/sh/oprofile/backtrace.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SH specific backtracing code for oprofile
- *
- * Copyright 2007 STMicroelectronics Ltd.
- *
- * Author: Dave Peverley <dpeverley@mpc-data.co.uk>
- *
- * Based on ARM oprofile backtrace code by Richard Purdie and in turn, i386
- * oprofile backtrace code by John Levon, David Smith
- */
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/kallsyms.h>
-#include <linux/mm.h>
-#include <asm/unwinder.h>
-#include <asm/ptrace.h>
-#include <linux/uaccess.h>
-#include <asm/sections.h>
-#include <asm/stacktrace.h>
-
-static void backtrace_address(void *data, unsigned long addr, int reliable)
-{
-	unsigned int *depth = data;
-
-	if ((*depth)--)
-		oprofile_add_trace(addr);
-}
-
-static struct stacktrace_ops backtrace_ops = {
-	.address = backtrace_address,
-};
-
-/* Limit to stop backtracing too far. */
-static int backtrace_limit = 20;
-
-static unsigned long *
-user_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
-{
-	unsigned long buf_stack;
-
-	/* Also check accessibility of address */
-	if (!access_ok(stackaddr, sizeof(unsigned long)))
-		return NULL;
-
-	if (__copy_from_user_inatomic(&buf_stack, stackaddr, sizeof(unsigned long)))
-		return NULL;
-
-	/* Quick paranoia check */
-	if (buf_stack & 3)
-		return NULL;
-
-	oprofile_add_trace(buf_stack);
-
-	stackaddr++;
-
-	return stackaddr;
-}
-
-void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	unsigned long *stackaddr;
-
-	/*
-	 * Paranoia - clip max depth as we could get lost in the weeds.
-	 */
-	if (depth > backtrace_limit)
-		depth = backtrace_limit;
-
-	stackaddr = (unsigned long *)kernel_stack_pointer(regs);
-	if (!user_mode(regs)) {
-		if (depth)
-			unwind_stack(NULL, regs, stackaddr,
-				     &backtrace_ops, &depth);
-		return;
-	}
-
-	while (depth-- && (stackaddr != NULL))
-		stackaddr = user_backtrace(stackaddr, regs);
-}
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
deleted file mode 100644
index e4dd5d5a1115..000000000000
--- a/arch/sh/oprofile/common.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/sh/oprofile/init.c
- *
- * Copyright (C) 2003 - 2010  Paul Mundt
- *
- * Based on arch/mips/oprofile/common.c:
- *
- *	Copyright (C) 2004, 2005 Ralf Baechle
- *	Copyright (C) 2005 MIPS Technologies, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/perf_event.h>
-#include <linux/slab.h>
-#include <asm/processor.h>
-
-extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#ifdef CONFIG_HW_PERF_EVENTS
-/*
- * This will need to be reworked when multiple PMUs are supported.
- */
-static char *sh_pmu_op_name;
-
-char *op_name_from_perf_id(void)
-{
-	return sh_pmu_op_name;
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	ops->backtrace = sh_backtrace;
-
-	if (perf_num_counters() == 0)
-		return -ENODEV;
-
-	sh_pmu_op_name = kasprintf(GFP_KERNEL, "%s/%s",
-				   UTS_MACHINE, perf_pmu_name());
-	if (unlikely(!sh_pmu_op_name))
-		return -ENOMEM;
-
-	return oprofile_perf_init(ops);
-}
-
-void oprofile_arch_exit(void)
-{
-	oprofile_perf_exit();
-	kfree(sh_pmu_op_name);
-}
-#else
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	ops->backtrace = sh_backtrace;
-	return -ENODEV;
-}
-void oprofile_arch_exit(void) {}
-#endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 1a2b5649d267..2c1cee9eed73 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -20,7 +20,6 @@ config SPARC
 	select OF_PROMTREE
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_IDE
-	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP || SPARC64
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_SECCOMP if SPARC64
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 4a0919581697..bee99e65fe23 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -65,7 +65,6 @@ libs-y                 += arch/sparc/prom/
 libs-y                 += arch/sparc/lib/
 
 drivers-$(CONFIG_PM) += arch/sparc/power/
-drivers-$(CONFIG_OPROFILE)	+= arch/sparc/oprofile/
 
 boot := arch/sparc/boot
 
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index bde4d21a8ac8..d91eb6a76dd1 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -8,7 +8,6 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/sparc/oprofile/Makefile b/arch/sparc/oprofile/Makefile
deleted file mode 100644
index fe906e403d3a..000000000000
--- a/arch/sparc/oprofile/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) init.o
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
deleted file mode 100644
index 43730c9b1c86..000000000000
--- a/arch/sparc/oprofile/init.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/oprofile.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/param.h>	/* for HZ */
- 
-#ifdef CONFIG_SPARC64
-#include <linux/notifier.h>
-#include <linux/rcupdate.h>
-#include <linux/kdebug.h>
-#include <asm/nmi.h>
-
-static int profile_timer_exceptions_notify(struct notifier_block *self,
-					   unsigned long val, void *data)
-{
-	struct die_args *args = data;
-	int ret = NOTIFY_DONE;
-
-	switch (val) {
-	case DIE_NMI:
-		oprofile_add_sample(args->regs, 0);
-		ret = NOTIFY_STOP;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static struct notifier_block profile_timer_exceptions_nb = {
-	.notifier_call	= profile_timer_exceptions_notify,
-};
-
-static int timer_start(void)
-{
-	if (register_die_notifier(&profile_timer_exceptions_nb))
-		return 1;
-	nmi_adjust_hz(HZ);
-	return 0;
-}
-
-
-static void timer_stop(void)
-{
-	nmi_adjust_hz(1);
-	unregister_die_notifier(&profile_timer_exceptions_nb);
-	synchronize_rcu();  /* Allow already-started NMIs to complete. */
-}
-
-static int op_nmi_timer_init(struct oprofile_operations *ops)
-{
-	if (atomic_read(&nmi_active) <= 0)
-		return -ENODEV;
-
-	ops->start = timer_start;
-	ops->stop = timer_stop;
-	ops->cpu_type = "timer";
-	printk(KERN_INFO "oprofile: Using perfctr NMI timer interrupt.\n");
-	return 0;
-}
-#endif
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	int ret = -ENODEV;
-
-#ifdef CONFIG_SPARC64
-	ret = op_nmi_timer_init(ops);
-	if (!ret)
-		return ret;
-#endif
-
-	return ret;
-}
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 31d94448b4e1..7b934a591df2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -207,7 +207,6 @@ config X86
 	select HAVE_MOVE_PMD
 	select HAVE_MOVE_PUD
 	select HAVE_NMI
-	select HAVE_OPROFILE
 	select HAVE_OPTPROBES
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b9f58b8993b3..b797f1561943 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -232,9 +232,6 @@ core-y += arch/x86/
 drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
 drivers-$(CONFIG_PCI)            += arch/x86/pci/
 
-# must be linked after kernel/
-drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
-
 # suspend and hibernation support
 drivers-$(CONFIG_PM) += arch/x86/power/
 
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index 9d5d949e662e..1cb9c17a4cb4 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -9,7 +9,6 @@
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
-extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
 extern int reserve_evntsel_nmi(unsigned int);
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index a5ee607a3b89..3ef5868ac588 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -3,7 +3,7 @@
  * local apic based NMI watchdog for various CPUs.
  *
  * This file also handles reservation of performance counters for coordination
- * with other users (like oprofile).
+ * with other users.
  *
  * Note that these events normally don't tick when the CPU idles. This means
  * the frequency varies with CPU load.
@@ -105,15 +105,6 @@ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
 
 }
 
-/* checks for a bit availability (hack for oprofile) */
-int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
-{
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	return !test_bit(counter, perfctr_nmi_owner);
-}
-EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
-
 int reserve_perfctr_nmi(unsigned int msr)
 {
 	unsigned int counter;
diff --git a/arch/x86/oprofile/Makefile b/arch/x86/oprofile/Makefile
deleted file mode 100644
index 4d49b5a27025..000000000000
--- a/arch/x86/oprofile/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o  \
-		timer_int.o nmi_timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_X86_LOCAL_APIC) 	+= nmi_int.o op_model_amd.o \
-					   op_model_ppro.o op_model_p4.o
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
deleted file mode 100644
index 1d8391fcca68..000000000000
--- a/arch/x86/oprofile/backtrace.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/**
- * @file backtrace.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author David Smith
- */
-
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/compat.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-#include <asm/unwind.h>
-
-#ifdef CONFIG_COMPAT
-static struct stack_frame_ia32 *
-dump_user_backtrace_32(struct stack_frame_ia32 *head)
-{
-	/* Also check accessibility of one struct frame_head beyond: */
-	struct stack_frame_ia32 bufhead[2];
-	struct stack_frame_ia32 *fp;
-	unsigned long bytes;
-
-	bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
-	if (bytes != 0)
-		return NULL;
-
-	fp = (struct stack_frame_ia32 *) compat_ptr(bufhead[0].next_frame);
-
-	oprofile_add_trace(bufhead[0].return_address);
-
-	/* frame pointers should strictly progress back up the stack
-	* (towards higher addresses) */
-	if (head >= fp)
-		return NULL;
-
-	return fp;
-}
-
-static inline int
-x86_backtrace_32(struct pt_regs * const regs, unsigned int depth)
-{
-	struct stack_frame_ia32 *head;
-
-	/* User process is IA32 */
-	if (!current || user_64bit_mode(regs))
-		return 0;
-
-	head = (struct stack_frame_ia32 *) regs->bp;
-	while (depth-- && head)
-		head = dump_user_backtrace_32(head);
-
-	return 1;
-}
-
-#else
-static inline int
-x86_backtrace_32(struct pt_regs * const regs, unsigned int depth)
-{
-	return 0;
-}
-#endif /* CONFIG_COMPAT */
-
-static struct stack_frame *dump_user_backtrace(struct stack_frame *head)
-{
-	/* Also check accessibility of one struct frame_head beyond: */
-	struct stack_frame bufhead[2];
-	unsigned long bytes;
-
-	bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
-	if (bytes != 0)
-		return NULL;
-
-	oprofile_add_trace(bufhead[0].return_address);
-
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (head >= bufhead[0].next_frame)
-		return NULL;
-
-	return bufhead[0].next_frame;
-}
-
-void
-x86_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	struct stack_frame *head = (struct stack_frame *)frame_pointer(regs);
-
-	if (!user_mode(regs)) {
-		struct unwind_state state;
-		unsigned long addr;
-
-		if (!depth)
-			return;
-
-		oprofile_add_trace(regs->ip);
-
-		if (!--depth)
-			return;
-
-		for (unwind_start(&state, current, regs, NULL);
-		     !unwind_done(&state); unwind_next_frame(&state)) {
-			addr = unwind_get_return_address(&state);
-			if (!addr)
-				break;
-
-			oprofile_add_trace(addr);
-
-			if (!--depth)
-				break;
-		}
-
-		return;
-	}
-
-	if (x86_backtrace_32(regs, depth))
-		return;
-
-	while (depth-- && head)
-		head = dump_user_backtrace(head);
-}
diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c
deleted file mode 100644
index 9e138d00ad36..000000000000
--- a/arch/x86/oprofile/init.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-/*
- * We support CPUs that have performance counters like the Pentium Pro
- * with the NMI mode driver.
- */
-
-#ifdef CONFIG_X86_LOCAL_APIC
-extern int op_nmi_init(struct oprofile_operations *ops);
-extern void op_nmi_exit(void);
-#else
-static int op_nmi_init(struct oprofile_operations *ops) { return -ENODEV; }
-static void op_nmi_exit(void) { }
-#endif
-
-extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	ops->backtrace = x86_backtrace;
-	return op_nmi_init(ops);
-}
-
-void oprofile_arch_exit(void)
-{
-	op_nmi_exit();
-}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
deleted file mode 100644
index a7a7677265b6..000000000000
--- a/arch/x86/oprofile/nmi_int.c
+++ /dev/null
@@ -1,780 +0,0 @@
-/**
- * @file nmi_int.c
- *
- * @remark Copyright 2002-2009 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- * @author Robert Richter <robert.richter@amd.com>
- * @author Barry Kasindorf <barry.kasindorf@amd.com>
- * @author Jason Yeh <jason.yeh@amd.com>
- * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
- */
-
-#include <linux/init.h>
-#include <linux/notifier.h>
-#include <linux/smp.h>
-#include <linux/oprofile.h>
-#include <linux/syscore_ops.h>
-#include <linux/slab.h>
-#include <linux/moduleparam.h>
-#include <linux/kdebug.h>
-#include <linux/cpu.h>
-#include <asm/nmi.h>
-#include <asm/msr.h>
-#include <asm/apic.h>
-
-#include "op_counter.h"
-#include "op_x86_model.h"
-
-static struct op_x86_model_spec *model;
-static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
-static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
-
-/* must be protected with get_online_cpus()/put_online_cpus(): */
-static int nmi_enabled;
-static int ctr_running;
-
-struct op_counter_config counter_config[OP_MAX_COUNTER];
-
-/* common functions */
-
-u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
-		    struct op_counter_config *counter_config)
-{
-	u64 val = 0;
-	u16 event = (u16)counter_config->event;
-
-	val |= ARCH_PERFMON_EVENTSEL_INT;
-	val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
-	val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
-	val |= (counter_config->unit_mask & 0xFF) << 8;
-	counter_config->extra &= (ARCH_PERFMON_EVENTSEL_INV |
-				  ARCH_PERFMON_EVENTSEL_EDGE |
-				  ARCH_PERFMON_EVENTSEL_CMASK);
-	val |= counter_config->extra;
-	event &= model->event_mask ? model->event_mask : 0xFF;
-	val |= event & 0xFF;
-	val |= (u64)(event & 0x0F00) << 24;
-
-	return val;
-}
-
-
-static int profile_exceptions_notify(unsigned int val, struct pt_regs *regs)
-{
-	if (ctr_running)
-		model->check_ctrs(regs, this_cpu_ptr(&cpu_msrs));
-	else if (!nmi_enabled)
-		return NMI_DONE;
-	else
-		model->stop(this_cpu_ptr(&cpu_msrs));
-	return NMI_HANDLED;
-}
-
-static void nmi_cpu_save_registers(struct op_msrs *msrs)
-{
-	struct op_msr *counters = msrs->counters;
-	struct op_msr *controls = msrs->controls;
-	unsigned int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		if (counters[i].addr)
-			rdmsrl(counters[i].addr, counters[i].saved);
-	}
-
-	for (i = 0; i < model->num_controls; ++i) {
-		if (controls[i].addr)
-			rdmsrl(controls[i].addr, controls[i].saved);
-	}
-}
-
-static void nmi_cpu_start(void *dummy)
-{
-	struct op_msrs const *msrs = this_cpu_ptr(&cpu_msrs);
-	if (!msrs->controls)
-		WARN_ON_ONCE(1);
-	else
-		model->start(msrs);
-}
-
-static int nmi_start(void)
-{
-	get_online_cpus();
-	ctr_running = 1;
-	/* make ctr_running visible to the nmi handler: */
-	smp_mb();
-	on_each_cpu(nmi_cpu_start, NULL, 1);
-	put_online_cpus();
-	return 0;
-}
-
-static void nmi_cpu_stop(void *dummy)
-{
-	struct op_msrs const *msrs = this_cpu_ptr(&cpu_msrs);
-	if (!msrs->controls)
-		WARN_ON_ONCE(1);
-	else
-		model->stop(msrs);
-}
-
-static void nmi_stop(void)
-{
-	get_online_cpus();
-	on_each_cpu(nmi_cpu_stop, NULL, 1);
-	ctr_running = 0;
-	put_online_cpus();
-}
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static DEFINE_PER_CPU(int, switch_index);
-
-static inline int has_mux(void)
-{
-	return !!model->switch_ctrl;
-}
-
-inline int op_x86_phys_to_virt(int phys)
-{
-	return __this_cpu_read(switch_index) + phys;
-}
-
-inline int op_x86_virt_to_phys(int virt)
-{
-	return virt % model->num_counters;
-}
-
-static void nmi_shutdown_mux(void)
-{
-	int i;
-
-	if (!has_mux())
-		return;
-
-	for_each_possible_cpu(i) {
-		kfree(per_cpu(cpu_msrs, i).multiplex);
-		per_cpu(cpu_msrs, i).multiplex = NULL;
-		per_cpu(switch_index, i) = 0;
-	}
-}
-
-static int nmi_setup_mux(void)
-{
-	size_t multiplex_size =
-		sizeof(struct op_msr) * model->num_virt_counters;
-	int i;
-
-	if (!has_mux())
-		return 1;
-
-	for_each_possible_cpu(i) {
-		per_cpu(cpu_msrs, i).multiplex =
-			kzalloc(multiplex_size, GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).multiplex)
-			return 0;
-	}
-
-	return 1;
-}
-
-static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
-{
-	int i;
-	struct op_msr *multiplex = msrs->multiplex;
-
-	if (!has_mux())
-		return;
-
-	for (i = 0; i < model->num_virt_counters; ++i) {
-		if (counter_config[i].enabled) {
-			multiplex[i].saved = -(u64)counter_config[i].count;
-		} else {
-			multiplex[i].saved = 0;
-		}
-	}
-
-	per_cpu(switch_index, cpu) = 0;
-}
-
-static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
-{
-	struct op_msr *counters = msrs->counters;
-	struct op_msr *multiplex = msrs->multiplex;
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (counters[i].addr)
-			rdmsrl(counters[i].addr, multiplex[virt].saved);
-	}
-}
-
-static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
-{
-	struct op_msr *counters = msrs->counters;
-	struct op_msr *multiplex = msrs->multiplex;
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (counters[i].addr)
-			wrmsrl(counters[i].addr, multiplex[virt].saved);
-	}
-}
-
-static void nmi_cpu_switch(void *dummy)
-{
-	int cpu = smp_processor_id();
-	int si = per_cpu(switch_index, cpu);
-	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
-	nmi_cpu_stop(NULL);
-	nmi_cpu_save_mpx_registers(msrs);
-
-	/* move to next set */
-	si += model->num_counters;
-	if ((si >= model->num_virt_counters) || (counter_config[si].count == 0))
-		per_cpu(switch_index, cpu) = 0;
-	else
-		per_cpu(switch_index, cpu) = si;
-
-	model->switch_ctrl(model, msrs);
-	nmi_cpu_restore_mpx_registers(msrs);
-
-	nmi_cpu_start(NULL);
-}
-
-
-/*
- * Quick check to see if multiplexing is necessary.
- * The check should be sufficient since counters are used
- * in ordre.
- */
-static int nmi_multiplex_on(void)
-{
-	return counter_config[model->num_counters].count ? 0 : -EINVAL;
-}
-
-static int nmi_switch_event(void)
-{
-	if (!has_mux())
-		return -ENOSYS;		/* not implemented */
-	if (nmi_multiplex_on() < 0)
-		return -EINVAL;		/* not necessary */
-
-	get_online_cpus();
-	if (ctr_running)
-		on_each_cpu(nmi_cpu_switch, NULL, 1);
-	put_online_cpus();
-
-	return 0;
-}
-
-static inline void mux_init(struct oprofile_operations *ops)
-{
-	if (has_mux())
-		ops->switch_events = nmi_switch_event;
-}
-
-static void mux_clone(int cpu)
-{
-	if (!has_mux())
-		return;
-
-	memcpy(per_cpu(cpu_msrs, cpu).multiplex,
-	       per_cpu(cpu_msrs, 0).multiplex,
-	       sizeof(struct op_msr) * model->num_virt_counters);
-}
-
-#else
-
-inline int op_x86_phys_to_virt(int phys) { return phys; }
-inline int op_x86_virt_to_phys(int virt) { return virt; }
-static inline void nmi_shutdown_mux(void) { }
-static inline int nmi_setup_mux(void) { return 1; }
-static inline void
-nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
-static inline void mux_init(struct oprofile_operations *ops) { }
-static void mux_clone(int cpu) { }
-
-#endif
-
-static void free_msrs(void)
-{
-	int i;
-	for_each_possible_cpu(i) {
-		kfree(per_cpu(cpu_msrs, i).counters);
-		per_cpu(cpu_msrs, i).counters = NULL;
-		kfree(per_cpu(cpu_msrs, i).controls);
-		per_cpu(cpu_msrs, i).controls = NULL;
-	}
-	nmi_shutdown_mux();
-}
-
-static int allocate_msrs(void)
-{
-	size_t controls_size = sizeof(struct op_msr) * model->num_controls;
-	size_t counters_size = sizeof(struct op_msr) * model->num_counters;
-
-	int i;
-	for_each_possible_cpu(i) {
-		per_cpu(cpu_msrs, i).counters = kzalloc(counters_size,
-							GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).counters)
-			goto fail;
-		per_cpu(cpu_msrs, i).controls = kzalloc(controls_size,
-							GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).controls)
-			goto fail;
-	}
-
-	if (!nmi_setup_mux())
-		goto fail;
-
-	return 1;
-
-fail:
-	free_msrs();
-	return 0;
-}
-
-static void nmi_cpu_setup(void)
-{
-	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
-	nmi_cpu_save_registers(msrs);
-	raw_spin_lock(&oprofilefs_lock);
-	model->setup_ctrs(model, msrs);
-	nmi_cpu_setup_mux(cpu, msrs);
-	raw_spin_unlock(&oprofilefs_lock);
-	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-}
-
-static void nmi_cpu_restore_registers(struct op_msrs *msrs)
-{
-	struct op_msr *counters = msrs->counters;
-	struct op_msr *controls = msrs->controls;
-	unsigned int i;
-
-	for (i = 0; i < model->num_controls; ++i) {
-		if (controls[i].addr)
-			wrmsrl(controls[i].addr, controls[i].saved);
-	}
-
-	for (i = 0; i < model->num_counters; ++i) {
-		if (counters[i].addr)
-			wrmsrl(counters[i].addr, counters[i].saved);
-	}
-}
-
-static void nmi_cpu_shutdown(void)
-{
-	unsigned int v;
-	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
-	/* restoring APIC_LVTPC can trigger an apic error because the delivery
-	 * mode and vector nr combination can be illegal. That's by design: on
-	 * power on apic lvt contain a zero vector nr which are legal only for
-	 * NMI delivery mode. So inhibit apic err before restoring lvtpc
-	 */
-	v = apic_read(APIC_LVTERR);
-	apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
-	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
-	apic_write(APIC_LVTERR, v);
-	nmi_cpu_restore_registers(msrs);
-}
-
-static int nmi_cpu_online(unsigned int cpu)
-{
-	local_irq_disable();
-	if (nmi_enabled)
-		nmi_cpu_setup();
-	if (ctr_running)
-		nmi_cpu_start(NULL);
-	local_irq_enable();
-	return 0;
-}
-
-static int nmi_cpu_down_prep(unsigned int cpu)
-{
-	local_irq_disable();
-	if (ctr_running)
-		nmi_cpu_stop(NULL);
-	if (nmi_enabled)
-		nmi_cpu_shutdown();
-	local_irq_enable();
-	return 0;
-}
-
-static int nmi_create_files(struct dentry *root)
-{
-	unsigned int i;
-
-	for (i = 0; i < model->num_virt_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		/* quick little hack to _not_ expose a counter if it is not
-		 * available for use.  This should protect userspace app.
-		 * NOTE:  assumes 1:1 mapping here (that counters are organized
-		 *        sequentially in their struct assignment).
-		 */
-		if (!avail_to_resrv_perfctr_nmi_bit(op_x86_virt_to_phys(i)))
-			continue;
-
-		snprintf(buf,  sizeof(buf), "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-		oprofilefs_create_ulong(dir, "enabled", &counter_config[i].enabled);
-		oprofilefs_create_ulong(dir, "event", &counter_config[i].event);
-		oprofilefs_create_ulong(dir, "count", &counter_config[i].count);
-		oprofilefs_create_ulong(dir, "unit_mask", &counter_config[i].unit_mask);
-		oprofilefs_create_ulong(dir, "kernel", &counter_config[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &counter_config[i].user);
-		oprofilefs_create_ulong(dir, "extra", &counter_config[i].extra);
-	}
-
-	return 0;
-}
-
-static enum cpuhp_state cpuhp_nmi_online;
-
-static int nmi_setup(void)
-{
-	int err = 0;
-	int cpu;
-
-	if (!allocate_msrs())
-		return -ENOMEM;
-
-	/* We need to serialize save and setup for HT because the subset
-	 * of msrs are distinct for save and setup operations
-	 */
-
-	/* Assume saved/restored counters are the same on all CPUs */
-	err = model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
-	if (err)
-		goto fail;
-
-	for_each_possible_cpu(cpu) {
-		if (!IS_ENABLED(CONFIG_SMP) || !cpu)
-			continue;
-
-		memcpy(per_cpu(cpu_msrs, cpu).counters,
-		       per_cpu(cpu_msrs, 0).counters,
-		       sizeof(struct op_msr) * model->num_counters);
-
-		memcpy(per_cpu(cpu_msrs, cpu).controls,
-		       per_cpu(cpu_msrs, 0).controls,
-		       sizeof(struct op_msr) * model->num_controls);
-
-		mux_clone(cpu);
-	}
-
-	nmi_enabled = 0;
-	ctr_running = 0;
-	/* make variables visible to the nmi handler: */
-	smp_mb();
-	err = register_nmi_handler(NMI_LOCAL, profile_exceptions_notify,
-					0, "oprofile");
-	if (err)
-		goto fail;
-
-	nmi_enabled = 1;
-	/* make nmi_enabled visible to the nmi handler: */
-	smp_mb();
-	err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/oprofile:online",
-				nmi_cpu_online, nmi_cpu_down_prep);
-	if (err < 0)
-		goto fail_nmi;
-	cpuhp_nmi_online = err;
-	return 0;
-fail_nmi:
-	unregister_nmi_handler(NMI_LOCAL, "oprofile");
-fail:
-	free_msrs();
-	return err;
-}
-
-static void nmi_shutdown(void)
-{
-	struct op_msrs *msrs;
-
-	cpuhp_remove_state(cpuhp_nmi_online);
-	nmi_enabled = 0;
-	ctr_running = 0;
-
-	/* make variables visible to the nmi handler: */
-	smp_mb();
-	unregister_nmi_handler(NMI_LOCAL, "oprofile");
-	msrs = &get_cpu_var(cpu_msrs);
-	model->shutdown(msrs);
-	free_msrs();
-	put_cpu_var(cpu_msrs);
-}
-
-#ifdef CONFIG_PM
-
-static int nmi_suspend(void)
-{
-	/* Only one CPU left, just stop that one */
-	if (nmi_enabled == 1)
-		nmi_cpu_stop(NULL);
-	return 0;
-}
-
-static void nmi_resume(void)
-{
-	if (nmi_enabled == 1)
-		nmi_cpu_start(NULL);
-}
-
-static struct syscore_ops oprofile_syscore_ops = {
-	.resume		= nmi_resume,
-	.suspend	= nmi_suspend,
-};
-
-static void __init init_suspend_resume(void)
-{
-	register_syscore_ops(&oprofile_syscore_ops);
-}
-
-static void exit_suspend_resume(void)
-{
-	unregister_syscore_ops(&oprofile_syscore_ops);
-}
-
-#else
-
-static inline void init_suspend_resume(void) { }
-static inline void exit_suspend_resume(void) { }
-
-#endif /* CONFIG_PM */
-
-static int __init p4_init(char **cpu_type)
-{
-	__u8 cpu_model = boot_cpu_data.x86_model;
-
-	if (cpu_model > 6 || cpu_model == 5)
-		return 0;
-
-#ifndef CONFIG_SMP
-	*cpu_type = "i386/p4";
-	model = &op_p4_spec;
-	return 1;
-#else
-	switch (smp_num_siblings) {
-	case 1:
-		*cpu_type = "i386/p4";
-		model = &op_p4_spec;
-		return 1;
-
-	case 2:
-		*cpu_type = "i386/p4-ht";
-		model = &op_p4_ht2_spec;
-		return 1;
-	}
-#endif
-
-	printk(KERN_INFO "oprofile: P4 HyperThreading detected with > 2 threads\n");
-	printk(KERN_INFO "oprofile: Reverting to timer mode.\n");
-	return 0;
-}
-
-enum __force_cpu_type {
-	reserved = 0,		/* do not force */
-	timer,
-	arch_perfmon,
-};
-
-static int force_cpu_type;
-
-static int set_cpu_type(const char *str, const struct kernel_param *kp)
-{
-	if (!strcmp(str, "timer")) {
-		force_cpu_type = timer;
-		printk(KERN_INFO "oprofile: forcing NMI timer mode\n");
-	} else if (!strcmp(str, "arch_perfmon")) {
-		force_cpu_type = arch_perfmon;
-		printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
-	} else {
-		force_cpu_type = 0;
-	}
-
-	return 0;
-}
-module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0);
-
-static int __init ppro_init(char **cpu_type)
-{
-	__u8 cpu_model = boot_cpu_data.x86_model;
-	struct op_x86_model_spec *spec = &op_ppro_spec;	/* default */
-
-	if (force_cpu_type == arch_perfmon && boot_cpu_has(X86_FEATURE_ARCH_PERFMON))
-		return 0;
-
-	/*
-	 * Documentation on identifying Intel processors by CPU family
-	 * and model can be found in the Intel Software Developer's
-	 * Manuals (SDM):
-	 *
-	 *  http://www.intel.com/products/processor/manuals/
-	 *
-	 * As of May 2010 the documentation for this was in the:
-	 * "Intel 64 and IA-32 Architectures Software Developer's
-	 * Manual Volume 3B: System Programming Guide", "Table B-1
-	 * CPUID Signature Values of DisplayFamily_DisplayModel".
-	 */
-	switch (cpu_model) {
-	case 0 ... 2:
-		*cpu_type = "i386/ppro";
-		break;
-	case 3 ... 5:
-		*cpu_type = "i386/pii";
-		break;
-	case 6 ... 8:
-	case 10 ... 11:
-		*cpu_type = "i386/piii";
-		break;
-	case 9:
-	case 13:
-		*cpu_type = "i386/p6_mobile";
-		break;
-	case 14:
-		*cpu_type = "i386/core";
-		break;
-	case 0x0f:
-	case 0x16:
-	case 0x17:
-	case 0x1d:
-		*cpu_type = "i386/core_2";
-		break;
-	case 0x1a:
-	case 0x1e:
-	case 0x2e:
-		spec = &op_arch_perfmon_spec;
-		*cpu_type = "i386/core_i7";
-		break;
-	case 0x1c:
-		*cpu_type = "i386/atom";
-		break;
-	default:
-		/* Unknown */
-		return 0;
-	}
-
-	model = spec;
-	return 1;
-}
-
-int __init op_nmi_init(struct oprofile_operations *ops)
-{
-	__u8 vendor = boot_cpu_data.x86_vendor;
-	__u8 family = boot_cpu_data.x86;
-	char *cpu_type = NULL;
-	int ret = 0;
-
-	if (!boot_cpu_has(X86_FEATURE_APIC))
-		return -ENODEV;
-
-	if (force_cpu_type == timer)
-		return -ENODEV;
-
-	switch (vendor) {
-	case X86_VENDOR_AMD:
-		/* Needs to be at least an Athlon (or hammer in 32bit mode) */
-
-		switch (family) {
-		case 6:
-			cpu_type = "i386/athlon";
-			break;
-		case 0xf:
-			/*
-			 * Actually it could be i386/hammer too, but
-			 * give user space an consistent name.
-			 */
-			cpu_type = "x86-64/hammer";
-			break;
-		case 0x10:
-			cpu_type = "x86-64/family10";
-			break;
-		case 0x11:
-			cpu_type = "x86-64/family11h";
-			break;
-		case 0x12:
-			cpu_type = "x86-64/family12h";
-			break;
-		case 0x14:
-			cpu_type = "x86-64/family14h";
-			break;
-		case 0x15:
-			cpu_type = "x86-64/family15h";
-			break;
-		default:
-			return -ENODEV;
-		}
-		model = &op_amd_spec;
-		break;
-
-	case X86_VENDOR_INTEL:
-		switch (family) {
-			/* Pentium IV */
-		case 0xf:
-			p4_init(&cpu_type);
-			break;
-
-			/* A P6-class processor */
-		case 6:
-			ppro_init(&cpu_type);
-			break;
-
-		default:
-			break;
-		}
-
-		if (cpu_type)
-			break;
-
-		if (!boot_cpu_has(X86_FEATURE_ARCH_PERFMON))
-			return -ENODEV;
-
-		/* use arch perfmon as fallback */
-		cpu_type = "i386/arch_perfmon";
-		model = &op_arch_perfmon_spec;
-		break;
-
-	default:
-		return -ENODEV;
-	}
-
-	/* default values, can be overwritten by model */
-	ops->create_files	= nmi_create_files;
-	ops->setup		= nmi_setup;
-	ops->shutdown		= nmi_shutdown;
-	ops->start		= nmi_start;
-	ops->stop		= nmi_stop;
-	ops->cpu_type		= cpu_type;
-
-	if (model->init)
-		ret = model->init(ops);
-	if (ret)
-		return ret;
-
-	if (!model->num_virt_counters)
-		model->num_virt_counters = model->num_counters;
-
-	mux_init(ops);
-
-	init_suspend_resume();
-
-	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
-	return 0;
-}
-
-void op_nmi_exit(void)
-{
-	exit_suspend_resume();
-}
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
deleted file mode 100644
index 0b7b7b179cbe..000000000000
--- a/arch/x86/oprofile/op_counter.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/**
- * @file op_counter.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- */
-
-#ifndef OP_COUNTER_H
-#define OP_COUNTER_H
-
-#define OP_MAX_COUNTER 32
-
-/* Per-perfctr configuration as set via
- * oprofilefs.
- */
-struct op_counter_config {
-	unsigned long count;
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-	unsigned long extra;
-};
-
-extern struct op_counter_config counter_config[];
-
-#endif /* OP_COUNTER_H */
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
deleted file mode 100644
index 660a83c8287b..000000000000
--- a/arch/x86/oprofile/op_model_amd.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/*
- * @file op_model_amd.c
- * athlon / K7 / K8 / Family 10h model-specific MSR operations
- *
- * @remark Copyright 2002-2009 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author Philippe Elie
- * @author Graydon Hoare
- * @author Robert Richter <robert.richter@amd.com>
- * @author Barry Kasindorf <barry.kasindorf@amd.com>
- * @author Jason Yeh <jason.yeh@amd.com>
- * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
- */
-
-#include <linux/oprofile.h>
-#include <linux/device.h>
-#include <linux/pci.h>
-#include <linux/percpu.h>
-
-#include <asm/ptrace.h>
-#include <asm/msr.h>
-#include <asm/nmi.h>
-#include <asm/apic.h>
-#include <asm/processor.h>
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-#define NUM_VIRT_COUNTERS	32
-#else
-#define NUM_VIRT_COUNTERS	0
-#endif
-
-#define OP_EVENT_MASK			0x0FFF
-#define OP_CTR_OVERFLOW			(1ULL<<31)
-
-#define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
-
-static int num_counters;
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-#define IBS_FETCH_SIZE			6
-#define IBS_OP_SIZE			12
-
-static u32 ibs_caps;
-
-struct ibs_config {
-	unsigned long op_enabled;
-	unsigned long fetch_enabled;
-	unsigned long max_cnt_fetch;
-	unsigned long max_cnt_op;
-	unsigned long rand_en;
-	unsigned long dispatched_ops;
-	unsigned long branch_target;
-};
-
-struct ibs_state {
-	u64		ibs_op_ctl;
-	int		branch_target;
-	unsigned long	sample_size;
-};
-
-static struct ibs_config ibs_config;
-static struct ibs_state ibs_state;
-
-/*
- * IBS randomization macros
- */
-#define IBS_RANDOM_BITS			12
-#define IBS_RANDOM_MASK			((1ULL << IBS_RANDOM_BITS) - 1)
-#define IBS_RANDOM_MAXCNT_OFFSET	(1ULL << (IBS_RANDOM_BITS - 5))
-
-/*
- * 16-bit Linear Feedback Shift Register (LFSR)
- *
- *                       16   14   13    11
- * Feedback polynomial = X  + X  + X  +  X  + 1
- */
-static unsigned int lfsr_random(void)
-{
-	static unsigned int lfsr_value = 0xF00D;
-	unsigned int bit;
-
-	/* Compute next bit to shift in */
-	bit = ((lfsr_value >> 0) ^
-	       (lfsr_value >> 2) ^
-	       (lfsr_value >> 3) ^
-	       (lfsr_value >> 5)) & 0x0001;
-
-	/* Advance to next register value */
-	lfsr_value = (lfsr_value >> 1) | (bit << 15);
-
-	return lfsr_value;
-}
-
-/*
- * IBS software randomization
- *
- * The IBS periodic op counter is randomized in software. The lower 12
- * bits of the 20 bit counter are randomized. IbsOpCurCnt is
- * initialized with a 12 bit random value.
- */
-static inline u64 op_amd_randomize_ibs_op(u64 val)
-{
-	unsigned int random = lfsr_random();
-
-	if (!(ibs_caps & IBS_CAPS_RDWROPCNT))
-		/*
-		 * Work around if the hw can not write to IbsOpCurCnt
-		 *
-		 * Randomize the lower 8 bits of the 16 bit
-		 * IbsOpMaxCnt [15:0] value in the range of -128 to
-		 * +127 by adding/subtracting an offset to the
-		 * maximum count (IbsOpMaxCnt).
-		 *
-		 * To avoid over or underflows and protect upper bits
-		 * starting at bit 16, the initial value for
-		 * IbsOpMaxCnt must fit in the range from 0x0081 to
-		 * 0xff80.
-		 */
-		val += (s8)(random >> 4);
-	else
-		val |= (u64)(random & IBS_RANDOM_MASK) << 32;
-
-	return val;
-}
-
-static inline void
-op_amd_handle_ibs(struct pt_regs * const regs,
-		  struct op_msrs const * const msrs)
-{
-	u64 val, ctl;
-	struct op_entry entry;
-
-	if (!ibs_caps)
-		return;
-
-	if (ibs_config.fetch_enabled) {
-		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
-		if (ctl & IBS_FETCH_VAL) {
-			rdmsrl(MSR_AMD64_IBSFETCHLINAD, val);
-			oprofile_write_reserve(&entry, regs, val,
-					       IBS_FETCH_CODE, IBS_FETCH_SIZE);
-			oprofile_add_data64(&entry, val);
-			oprofile_add_data64(&entry, ctl);
-			rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, val);
-			oprofile_add_data64(&entry, val);
-			oprofile_write_commit(&entry);
-
-			/* reenable the IRQ */
-			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT);
-			ctl |= IBS_FETCH_ENABLE;
-			wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
-		}
-	}
-
-	if (ibs_config.op_enabled) {
-		rdmsrl(MSR_AMD64_IBSOPCTL, ctl);
-		if (ctl & IBS_OP_VAL) {
-			rdmsrl(MSR_AMD64_IBSOPRIP, val);
-			oprofile_write_reserve(&entry, regs, val, IBS_OP_CODE,
-					       ibs_state.sample_size);
-			oprofile_add_data64(&entry, val);
-			rdmsrl(MSR_AMD64_IBSOPDATA, val);
-			oprofile_add_data64(&entry, val);
-			rdmsrl(MSR_AMD64_IBSOPDATA2, val);
-			oprofile_add_data64(&entry, val);
-			rdmsrl(MSR_AMD64_IBSOPDATA3, val);
-			oprofile_add_data64(&entry, val);
-			rdmsrl(MSR_AMD64_IBSDCLINAD, val);
-			oprofile_add_data64(&entry, val);
-			rdmsrl(MSR_AMD64_IBSDCPHYSAD, val);
-			oprofile_add_data64(&entry, val);
-			if (ibs_state.branch_target) {
-				rdmsrl(MSR_AMD64_IBSBRTARGET, val);
-				oprofile_add_data(&entry, (unsigned long)val);
-			}
-			oprofile_write_commit(&entry);
-
-			/* reenable the IRQ */
-			ctl = op_amd_randomize_ibs_op(ibs_state.ibs_op_ctl);
-			wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
-		}
-	}
-}
-
-static inline void op_amd_start_ibs(void)
-{
-	u64 val;
-
-	if (!ibs_caps)
-		return;
-
-	memset(&ibs_state, 0, sizeof(ibs_state));
-
-	/*
-	 * Note: Since the max count settings may out of range we
-	 * write back the actual used values so that userland can read
-	 * it.
-	 */
-
-	if (ibs_config.fetch_enabled) {
-		val = ibs_config.max_cnt_fetch >> 4;
-		val = min(val, IBS_FETCH_MAX_CNT);
-		ibs_config.max_cnt_fetch = val << 4;
-		val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
-		val |= IBS_FETCH_ENABLE;
-		wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
-	}
-
-	if (ibs_config.op_enabled) {
-		val = ibs_config.max_cnt_op >> 4;
-		if (!(ibs_caps & IBS_CAPS_RDWROPCNT)) {
-			/*
-			 * IbsOpCurCnt not supported.  See
-			 * op_amd_randomize_ibs_op() for details.
-			 */
-			val = clamp(val, 0x0081ULL, 0xFF80ULL);
-			ibs_config.max_cnt_op = val << 4;
-		} else {
-			/*
-			 * The start value is randomized with a
-			 * positive offset, we need to compensate it
-			 * with the half of the randomized range. Also
-			 * avoid underflows.
-			 */
-			val += IBS_RANDOM_MAXCNT_OFFSET;
-			if (ibs_caps & IBS_CAPS_OPCNTEXT)
-				val = min(val, IBS_OP_MAX_CNT_EXT);
-			else
-				val = min(val, IBS_OP_MAX_CNT);
-			ibs_config.max_cnt_op =
-				(val - IBS_RANDOM_MAXCNT_OFFSET) << 4;
-		}
-		val = ((val & ~IBS_OP_MAX_CNT) << 4) | (val & IBS_OP_MAX_CNT);
-		val |= ibs_config.dispatched_ops ? IBS_OP_CNT_CTL : 0;
-		val |= IBS_OP_ENABLE;
-		ibs_state.ibs_op_ctl = val;
-		ibs_state.sample_size = IBS_OP_SIZE;
-		if (ibs_config.branch_target) {
-			ibs_state.branch_target = 1;
-			ibs_state.sample_size++;
-		}
-		val = op_amd_randomize_ibs_op(ibs_state.ibs_op_ctl);
-		wrmsrl(MSR_AMD64_IBSOPCTL, val);
-	}
-}
-
-static void op_amd_stop_ibs(void)
-{
-	if (!ibs_caps)
-		return;
-
-	if (ibs_config.fetch_enabled)
-		/* clear max count and enable */
-		wrmsrl(MSR_AMD64_IBSFETCHCTL, 0);
-
-	if (ibs_config.op_enabled)
-		/* clear max count and enable */
-		wrmsrl(MSR_AMD64_IBSOPCTL, 0);
-}
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
-			       struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	/* enable active counters */
-	for (i = 0; i < num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (!reset_value[virt])
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= model->reserved;
-		val |= op_x86_get_ctrl(model, &counter_config[virt]);
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-}
-
-#endif
-
-/* functions for op_amd_spec */
-
-static void op_amd_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!msrs->counters[i].addr)
-			continue;
-		release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-		release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
-	}
-}
-
-static int op_amd_fill_in_addresses(struct op_msrs * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; i++) {
-		if (!reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
-			goto fail;
-		if (!reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) {
-			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-			goto fail;
-		}
-		/* both registers must be reserved */
-		if (num_counters == AMD64_NUM_COUNTERS_CORE) {
-			msrs->counters[i].addr = MSR_F15H_PERF_CTR + (i << 1);
-			msrs->controls[i].addr = MSR_F15H_PERF_CTL + (i << 1);
-		} else {
-			msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
-			msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
-		}
-		continue;
-	fail:
-		if (!counter_config[i].enabled)
-			continue;
-		op_x86_warn_reserved(i);
-		op_amd_shutdown(msrs);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
-			      struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	/* setup reset_value */
-	for (i = 0; i < OP_MAX_COUNTER; ++i) {
-		if (counter_config[i].enabled
-		    && msrs->counters[op_x86_virt_to_phys(i)].addr)
-			reset_value[i] = counter_config[i].count;
-		else
-			reset_value[i] = 0;
-	}
-
-	/* clear all counters */
-	for (i = 0; i < num_counters; ++i) {
-		if (!msrs->controls[i].addr)
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
-			op_x86_warn_in_use(i);
-		val &= model->reserved;
-		wrmsrl(msrs->controls[i].addr, val);
-		/*
-		 * avoid a false detection of ctr overflows in NMI
-		 * handler
-		 */
-		wrmsrl(msrs->counters[i].addr, -1LL);
-	}
-
-	/* enable active counters */
-	for (i = 0; i < num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (!reset_value[virt])
-			continue;
-
-		/* setup counter registers */
-		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
-
-		/* setup control registers */
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= model->reserved;
-		val |= op_x86_get_ctrl(model, &counter_config[virt]);
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-}
-
-static int op_amd_check_ctrs(struct pt_regs * const regs,
-			     struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (!reset_value[virt])
-			continue;
-		rdmsrl(msrs->counters[i].addr, val);
-		/* bit is clear if overflowed: */
-		if (val & OP_CTR_OVERFLOW)
-			continue;
-		oprofile_add_sample(regs, virt);
-		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
-	}
-
-	op_amd_handle_ibs(regs, msrs);
-
-	/* See op_model_ppro.c */
-	return 1;
-}
-
-static void op_amd_start(struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[op_x86_phys_to_virt(i)])
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-
-	op_amd_start_ibs();
-}
-
-static void op_amd_stop(struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	/*
-	 * Subtle: stop on all counters to avoid race with setting our
-	 * pm callback
-	 */
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[op_x86_phys_to_virt(i)])
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-
-	op_amd_stop_ibs();
-}
-
-/*
- * check and reserve APIC extended interrupt LVT offset for IBS if
- * available
- */
-
-static void init_ibs(void)
-{
-	ibs_caps = get_ibs_caps();
-
-	if (!ibs_caps)
-		return;
-
-	printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps);
-}
-
-static int (*create_arch_files)(struct dentry *root);
-
-static int setup_ibs_files(struct dentry *root)
-{
-	struct dentry *dir;
-	int ret = 0;
-
-	/* architecture specific files */
-	if (create_arch_files)
-		ret = create_arch_files(root);
-
-	if (ret)
-		return ret;
-
-	if (!ibs_caps)
-		return ret;
-
-	/* model specific files */
-
-	/* setup some reasonable defaults */
-	memset(&ibs_config, 0, sizeof(ibs_config));
-	ibs_config.max_cnt_fetch = 250000;
-	ibs_config.max_cnt_op = 250000;
-
-	if (ibs_caps & IBS_CAPS_FETCHSAM) {
-		dir = oprofilefs_mkdir(root, "ibs_fetch");
-		oprofilefs_create_ulong(dir, "enable",
-					&ibs_config.fetch_enabled);
-		oprofilefs_create_ulong(dir, "max_count",
-					&ibs_config.max_cnt_fetch);
-		oprofilefs_create_ulong(dir, "rand_enable",
-					&ibs_config.rand_en);
-	}
-
-	if (ibs_caps & IBS_CAPS_OPSAM) {
-		dir = oprofilefs_mkdir(root, "ibs_op");
-		oprofilefs_create_ulong(dir, "enable",
-					&ibs_config.op_enabled);
-		oprofilefs_create_ulong(dir, "max_count",
-					&ibs_config.max_cnt_op);
-		if (ibs_caps & IBS_CAPS_OPCNT)
-			oprofilefs_create_ulong(dir, "dispatched_ops",
-						&ibs_config.dispatched_ops);
-		if (ibs_caps & IBS_CAPS_BRNTRGT)
-			oprofilefs_create_ulong(dir, "branch_target",
-						&ibs_config.branch_target);
-	}
-
-	return 0;
-}
-
-struct op_x86_model_spec op_amd_spec;
-
-static int op_amd_init(struct oprofile_operations *ops)
-{
-	init_ibs();
-	create_arch_files = ops->create_files;
-	ops->create_files = setup_ibs_files;
-
-	if (boot_cpu_data.x86 == 0x15) {
-		num_counters = AMD64_NUM_COUNTERS_CORE;
-	} else {
-		num_counters = AMD64_NUM_COUNTERS;
-	}
-
-	op_amd_spec.num_counters = num_counters;
-	op_amd_spec.num_controls = num_counters;
-	op_amd_spec.num_virt_counters = max(num_counters, NUM_VIRT_COUNTERS);
-
-	return 0;
-}
-
-struct op_x86_model_spec op_amd_spec = {
-	/* num_counters/num_controls filled in at runtime */
-	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
-	.event_mask		= OP_EVENT_MASK,
-	.init			= op_amd_init,
-	.fill_in_addresses	= &op_amd_fill_in_addresses,
-	.setup_ctrs		= &op_amd_setup_ctrs,
-	.check_ctrs		= &op_amd_check_ctrs,
-	.start			= &op_amd_start,
-	.stop			= &op_amd_stop,
-	.shutdown		= &op_amd_shutdown,
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	.switch_ctrl		= &op_mux_switch_ctrl,
-#endif
-};
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
deleted file mode 100644
index ad1d91f475ab..000000000000
--- a/arch/x86/oprofile/op_model_p4.c
+++ /dev/null
@@ -1,723 +0,0 @@
-/**
- * @file op_model_p4.c
- * P4 model-specific MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Graydon Hoare
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <linux/ptrace.h>
-#include <asm/nmi.h>
-#include <asm/msr.h>
-#include <asm/fixmap.h>
-#include <asm/apic.h>
-
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-#define NUM_EVENTS 39
-
-#define NUM_COUNTERS_NON_HT 8
-#define NUM_ESCRS_NON_HT 45
-#define NUM_CCCRS_NON_HT 18
-#define NUM_CONTROLS_NON_HT (NUM_ESCRS_NON_HT + NUM_CCCRS_NON_HT)
-
-#define NUM_COUNTERS_HT2 4
-#define NUM_ESCRS_HT2 23
-#define NUM_CCCRS_HT2 9
-#define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2)
-
-#define OP_CTR_OVERFLOW			(1ULL<<31)
-
-static unsigned int num_counters = NUM_COUNTERS_NON_HT;
-static unsigned int num_controls = NUM_CONTROLS_NON_HT;
-
-/* this has to be checked dynamically since the
-   hyper-threadedness of a chip is discovered at
-   kernel boot-time. */
-static inline void setup_num_counters(void)
-{
-#ifdef CONFIG_SMP
-	if (smp_num_siblings == 2) {
-		num_counters = NUM_COUNTERS_HT2;
-		num_controls = NUM_CONTROLS_HT2;
-	}
-#endif
-}
-
-static inline int addr_increment(void)
-{
-#ifdef CONFIG_SMP
-	return smp_num_siblings == 2 ? 2 : 1;
-#else
-	return 1;
-#endif
-}
-
-
-/* tables to simulate simplified hardware view of p4 registers */
-struct p4_counter_binding {
-	int virt_counter;
-	int counter_address;
-	int cccr_address;
-};
-
-struct p4_event_binding {
-	int escr_select;  /* value to put in CCCR */
-	int event_select; /* value to put in ESCR */
-	struct {
-		int virt_counter; /* for this counter... */
-		int escr_address; /* use this ESCR       */
-	} bindings[2];
-};
-
-/* nb: these CTR_* defines are a duplicate of defines in
-   event/i386.p4*events. */
-
-
-#define CTR_BPU_0      (1 << 0)
-#define CTR_MS_0       (1 << 1)
-#define CTR_FLAME_0    (1 << 2)
-#define CTR_IQ_4       (1 << 3)
-#define CTR_BPU_2      (1 << 4)
-#define CTR_MS_2       (1 << 5)
-#define CTR_FLAME_2    (1 << 6)
-#define CTR_IQ_5       (1 << 7)
-
-static struct p4_counter_binding p4_counters[NUM_COUNTERS_NON_HT] = {
-	{ CTR_BPU_0,   MSR_P4_BPU_PERFCTR0,   MSR_P4_BPU_CCCR0 },
-	{ CTR_MS_0,    MSR_P4_MS_PERFCTR0,    MSR_P4_MS_CCCR0 },
-	{ CTR_FLAME_0, MSR_P4_FLAME_PERFCTR0, MSR_P4_FLAME_CCCR0 },
-	{ CTR_IQ_4,    MSR_P4_IQ_PERFCTR4,    MSR_P4_IQ_CCCR4 },
-	{ CTR_BPU_2,   MSR_P4_BPU_PERFCTR2,   MSR_P4_BPU_CCCR2 },
-	{ CTR_MS_2,    MSR_P4_MS_PERFCTR2,    MSR_P4_MS_CCCR2 },
-	{ CTR_FLAME_2, MSR_P4_FLAME_PERFCTR2, MSR_P4_FLAME_CCCR2 },
-	{ CTR_IQ_5,    MSR_P4_IQ_PERFCTR5,    MSR_P4_IQ_CCCR5 }
-};
-
-#define NUM_UNUSED_CCCRS (NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT)
-
-/* p4 event codes in libop/op_event.h are indices into this table. */
-
-static struct p4_event_binding p4_events[NUM_EVENTS] = {
-
-	{ /* BRANCH_RETIRED */
-		0x05, 0x06,
-		{ {CTR_IQ_4, MSR_P4_CRU_ESCR2},
-		  {CTR_IQ_5, MSR_P4_CRU_ESCR3} }
-	},
-
-	{ /* MISPRED_BRANCH_RETIRED */
-		0x04, 0x03,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR0},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
-	},
-
-	{ /* TC_DELIVER_MODE */
-		0x01, 0x01,
-		{ { CTR_MS_0, MSR_P4_TC_ESCR0},
-		  { CTR_MS_2, MSR_P4_TC_ESCR1} }
-	},
-
-	{ /* BPU_FETCH_REQUEST */
-		0x00, 0x03,
-		{ { CTR_BPU_0, MSR_P4_BPU_ESCR0},
-		  { CTR_BPU_2, MSR_P4_BPU_ESCR1} }
-	},
-
-	{ /* ITLB_REFERENCE */
-		0x03, 0x18,
-		{ { CTR_BPU_0, MSR_P4_ITLB_ESCR0},
-		  { CTR_BPU_2, MSR_P4_ITLB_ESCR1} }
-	},
-
-	{ /* MEMORY_CANCEL */
-		0x05, 0x02,
-		{ { CTR_FLAME_0, MSR_P4_DAC_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_DAC_ESCR1} }
-	},
-
-	{ /* MEMORY_COMPLETE */
-		0x02, 0x08,
-		{ { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
-	},
-
-	{ /* LOAD_PORT_REPLAY */
-		0x02, 0x04,
-		{ { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
-	},
-
-	{ /* STORE_PORT_REPLAY */
-		0x02, 0x05,
-		{ { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
-	},
-
-	{ /* MOB_LOAD_REPLAY */
-		0x02, 0x03,
-		{ { CTR_BPU_0, MSR_P4_MOB_ESCR0},
-		  { CTR_BPU_2, MSR_P4_MOB_ESCR1} }
-	},
-
-	{ /* PAGE_WALK_TYPE */
-		0x04, 0x01,
-		{ { CTR_BPU_0, MSR_P4_PMH_ESCR0},
-		  { CTR_BPU_2, MSR_P4_PMH_ESCR1} }
-	},
-
-	{ /* BSQ_CACHE_REFERENCE */
-		0x07, 0x0c,
-		{ { CTR_BPU_0, MSR_P4_BSU_ESCR0},
-		  { CTR_BPU_2, MSR_P4_BSU_ESCR1} }
-	},
-
-	{ /* IOQ_ALLOCATION */
-		0x06, 0x03,
-		{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
-		  { 0, 0 } }
-	},
-
-	{ /* IOQ_ACTIVE_ENTRIES */
-		0x06, 0x1a,
-		{ { CTR_BPU_2, MSR_P4_FSB_ESCR1},
-		  { 0, 0 } }
-	},
-
-	{ /* FSB_DATA_ACTIVITY */
-		0x06, 0x17,
-		{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
-		  { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
-	},
-
-	{ /* BSQ_ALLOCATION */
-		0x07, 0x05,
-		{ { CTR_BPU_0, MSR_P4_BSU_ESCR0},
-		  { 0, 0 } }
-	},
-
-	{ /* BSQ_ACTIVE_ENTRIES */
-		0x07, 0x06,
-		{ { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */},
-		  { 0, 0 } }
-	},
-
-	{ /* X87_ASSIST */
-		0x05, 0x03,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
-	},
-
-	{ /* SSE_INPUT_ASSIST */
-		0x01, 0x34,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* PACKED_SP_UOP */
-		0x01, 0x08,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* PACKED_DP_UOP */
-		0x01, 0x0c,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* SCALAR_SP_UOP */
-		0x01, 0x0a,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* SCALAR_DP_UOP */
-		0x01, 0x0e,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* 64BIT_MMX_UOP */
-		0x01, 0x02,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* 128BIT_MMX_UOP */
-		0x01, 0x1a,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* X87_FP_UOP */
-		0x01, 0x04,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* X87_SIMD_MOVES_UOP */
-		0x01, 0x2e,
-		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
-		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
-	},
-
-	{ /* MACHINE_CLEAR */
-		0x05, 0x02,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
-	},
-
-	{ /* GLOBAL_POWER_EVENTS */
-		0x06, 0x13 /* older manual says 0x05, newer 0x13 */,
-		{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
-		  { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
-	},
-
-	{ /* TC_MS_XFER */
-		0x00, 0x05,
-		{ { CTR_MS_0, MSR_P4_MS_ESCR0},
-		  { CTR_MS_2, MSR_P4_MS_ESCR1} }
-	},
-
-	{ /* UOP_QUEUE_WRITES */
-		0x00, 0x09,
-		{ { CTR_MS_0, MSR_P4_MS_ESCR0},
-		  { CTR_MS_2, MSR_P4_MS_ESCR1} }
-	},
-
-	{ /* FRONT_END_EVENT */
-		0x05, 0x08,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
-	},
-
-	{ /* EXECUTION_EVENT */
-		0x05, 0x0c,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
-	},
-
-	{ /* REPLAY_EVENT */
-		0x05, 0x09,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
-	},
-
-	{ /* INSTR_RETIRED */
-		0x04, 0x02,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR0},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
-	},
-
-	{ /* UOPS_RETIRED */
-		0x04, 0x01,
-		{ { CTR_IQ_4, MSR_P4_CRU_ESCR0},
-		  { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
-	},
-
-	{ /* UOP_TYPE */
-		0x02, 0x02,
-		{ { CTR_IQ_4, MSR_P4_RAT_ESCR0},
-		  { CTR_IQ_5, MSR_P4_RAT_ESCR1} }
-	},
-
-	{ /* RETIRED_MISPRED_BRANCH_TYPE */
-		0x02, 0x05,
-		{ { CTR_MS_0, MSR_P4_TBPU_ESCR0},
-		  { CTR_MS_2, MSR_P4_TBPU_ESCR1} }
-	},
-
-	{ /* RETIRED_BRANCH_TYPE */
-		0x02, 0x04,
-		{ { CTR_MS_0, MSR_P4_TBPU_ESCR0},
-		  { CTR_MS_2, MSR_P4_TBPU_ESCR1} }
-	}
-};
-
-
-#define MISC_PMC_ENABLED_P(x) ((x) & 1 << 7)
-
-#define ESCR_RESERVED_BITS 0x80000003
-#define ESCR_CLEAR(escr) ((escr) &= ESCR_RESERVED_BITS)
-#define ESCR_SET_USR_0(escr, usr) ((escr) |= (((usr) & 1) << 2))
-#define ESCR_SET_OS_0(escr, os) ((escr) |= (((os) & 1) << 3))
-#define ESCR_SET_USR_1(escr, usr) ((escr) |= (((usr) & 1)))
-#define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
-#define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
-#define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
-
-#define CCCR_RESERVED_BITS 0x38030FFF
-#define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
-#define CCCR_SET_REQUIRED_BITS(cccr) ((cccr) |= 0x00030000)
-#define CCCR_SET_ESCR_SELECT(cccr, sel) ((cccr) |= (((sel) & 0x07) << 13))
-#define CCCR_SET_PMI_OVF_0(cccr) ((cccr) |= (1<<26))
-#define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
-#define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
-#define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
-#define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
-#define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
-
-
-/* this assigns a "stagger" to the current CPU, which is used throughout
-   the code in this module as an extra array offset, to select the "even"
-   or "odd" part of all the divided resources. */
-static unsigned int get_stagger(void)
-{
-#ifdef CONFIG_SMP
-	int cpu = smp_processor_id();
-	return cpu != cpumask_first(this_cpu_cpumask_var_ptr(cpu_sibling_map));
-#endif
-	return 0;
-}
-
-
-/* finally, mediate access to a real hardware counter
-   by passing a "virtual" counter numer to this macro,
-   along with your stagger setting. */
-#define VIRT_CTR(stagger, i) ((i) + ((num_counters) * (stagger)))
-
-static unsigned long reset_value[NUM_COUNTERS_NON_HT];
-
-static void p4_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (msrs->counters[i].addr)
-			release_perfctr_nmi(msrs->counters[i].addr);
-	}
-	/*
-	 * some of the control registers are specially reserved in
-	 * conjunction with the counter registers (hence the starting offset).
-	 * This saves a few bits.
-	 */
-	for (i = num_counters; i < num_controls; ++i) {
-		if (msrs->controls[i].addr)
-			release_evntsel_nmi(msrs->controls[i].addr);
-	}
-}
-
-static int p4_fill_in_addresses(struct op_msrs * const msrs)
-{
-	unsigned int i;
-	unsigned int addr, cccraddr, stag;
-
-	setup_num_counters();
-	stag = get_stagger();
-
-	/* the counter & cccr registers we pay attention to */
-	for (i = 0; i < num_counters; ++i) {
-		addr = p4_counters[VIRT_CTR(stag, i)].counter_address;
-		cccraddr = p4_counters[VIRT_CTR(stag, i)].cccr_address;
-		if (reserve_perfctr_nmi(addr)) {
-			msrs->counters[i].addr = addr;
-			msrs->controls[i].addr = cccraddr;
-		}
-	}
-
-	/* 43 ESCR registers in three or four discontiguous group */
-	for (addr = MSR_P4_BSU_ESCR0 + stag;
-	     addr < MSR_P4_IQ_ESCR0; ++i, addr += addr_increment()) {
-		if (reserve_evntsel_nmi(addr))
-			msrs->controls[i].addr = addr;
-	}
-
-	/* no IQ_ESCR0/1 on some models, we save a seconde time BSU_ESCR0/1
-	 * to avoid special case in nmi_{save|restore}_registers() */
-	if (boot_cpu_data.x86_model >= 0x3) {
-		for (addr = MSR_P4_BSU_ESCR0 + stag;
-		     addr <= MSR_P4_BSU_ESCR1; ++i, addr += addr_increment()) {
-			if (reserve_evntsel_nmi(addr))
-				msrs->controls[i].addr = addr;
-		}
-	} else {
-		for (addr = MSR_P4_IQ_ESCR0 + stag;
-		     addr <= MSR_P4_IQ_ESCR1; ++i, addr += addr_increment()) {
-			if (reserve_evntsel_nmi(addr))
-				msrs->controls[i].addr = addr;
-		}
-	}
-
-	for (addr = MSR_P4_RAT_ESCR0 + stag;
-	     addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) {
-		if (reserve_evntsel_nmi(addr))
-			msrs->controls[i].addr = addr;
-	}
-
-	for (addr = MSR_P4_MS_ESCR0 + stag;
-	     addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) {
-		if (reserve_evntsel_nmi(addr))
-			msrs->controls[i].addr = addr;
-	}
-
-	for (addr = MSR_P4_IX_ESCR0 + stag;
-	     addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) {
-		if (reserve_evntsel_nmi(addr))
-			msrs->controls[i].addr = addr;
-	}
-
-	/* there are 2 remaining non-contiguously located ESCRs */
-
-	if (num_counters == NUM_COUNTERS_NON_HT) {
-		/* standard non-HT CPUs handle both remaining ESCRs*/
-		if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5))
-			msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
-		if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4))
-			msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
-
-	} else if (stag == 0) {
-		/* HT CPUs give the first remainder to the even thread, as
-		   the 32nd control register */
-		if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4))
-			msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
-
-	} else {
-		/* and two copies of the second to the odd thread,
-		   for the 22st and 23nd control registers */
-		if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5)) {
-			msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
-			msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
-		}
-	}
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!counter_config[i].enabled)
-			continue;
-		if (msrs->controls[i].addr)
-			continue;
-		op_x86_warn_reserved(i);
-		p4_shutdown(msrs);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-
-static void pmc_setup_one_p4_counter(unsigned int ctr)
-{
-	int i;
-	int const maxbind = 2;
-	unsigned int cccr = 0;
-	unsigned int escr = 0;
-	unsigned int high = 0;
-	unsigned int counter_bit;
-	struct p4_event_binding *ev = NULL;
-	unsigned int stag;
-
-	stag = get_stagger();
-
-	/* convert from counter *number* to counter *bit* */
-	counter_bit = 1 << VIRT_CTR(stag, ctr);
-
-	/* find our event binding structure. */
-	if (counter_config[ctr].event <= 0 || counter_config[ctr].event > NUM_EVENTS) {
-		printk(KERN_ERR
-		       "oprofile: P4 event code 0x%lx out of range\n",
-		       counter_config[ctr].event);
-		return;
-	}
-
-	ev = &(p4_events[counter_config[ctr].event - 1]);
-
-	for (i = 0; i < maxbind; i++) {
-		if (ev->bindings[i].virt_counter & counter_bit) {
-
-			/* modify ESCR */
-			rdmsr(ev->bindings[i].escr_address, escr, high);
-			ESCR_CLEAR(escr);
-			if (stag == 0) {
-				ESCR_SET_USR_0(escr, counter_config[ctr].user);
-				ESCR_SET_OS_0(escr, counter_config[ctr].kernel);
-			} else {
-				ESCR_SET_USR_1(escr, counter_config[ctr].user);
-				ESCR_SET_OS_1(escr, counter_config[ctr].kernel);
-			}
-			ESCR_SET_EVENT_SELECT(escr, ev->event_select);
-			ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
-			wrmsr(ev->bindings[i].escr_address, escr, high);
-
-			/* modify CCCR */
-			rdmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
-			      cccr, high);
-			CCCR_CLEAR(cccr);
-			CCCR_SET_REQUIRED_BITS(cccr);
-			CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
-			if (stag == 0)
-				CCCR_SET_PMI_OVF_0(cccr);
-			else
-				CCCR_SET_PMI_OVF_1(cccr);
-			wrmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
-			      cccr, high);
-			return;
-		}
-	}
-
-	printk(KERN_ERR
-	       "oprofile: P4 event code 0x%lx no binding, stag %d ctr %d\n",
-	       counter_config[ctr].event, stag, ctr);
-}
-
-
-static void p4_setup_ctrs(struct op_x86_model_spec const *model,
-			  struct op_msrs const * const msrs)
-{
-	unsigned int i;
-	unsigned int low, high;
-	unsigned int stag;
-
-	stag = get_stagger();
-
-	rdmsr(MSR_IA32_MISC_ENABLE, low, high);
-	if (!MISC_PMC_ENABLED_P(low)) {
-		printk(KERN_ERR "oprofile: P4 PMC not available\n");
-		return;
-	}
-
-	/* clear the cccrs we will use */
-	for (i = 0; i < num_counters; i++) {
-		if (unlikely(!msrs->controls[i].addr))
-			continue;
-		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
-		CCCR_CLEAR(low);
-		CCCR_SET_REQUIRED_BITS(low);
-		wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
-	}
-
-	/* clear all escrs (including those outside our concern) */
-	for (i = num_counters; i < num_controls; i++) {
-		if (unlikely(!msrs->controls[i].addr))
-			continue;
-		wrmsr(msrs->controls[i].addr, 0, 0);
-	}
-
-	/* setup all counters */
-	for (i = 0; i < num_counters; ++i) {
-		if (counter_config[i].enabled && msrs->controls[i].addr) {
-			reset_value[i] = counter_config[i].count;
-			pmc_setup_one_p4_counter(i);
-			wrmsrl(p4_counters[VIRT_CTR(stag, i)].counter_address,
-			       -(u64)counter_config[i].count);
-		} else {
-			reset_value[i] = 0;
-		}
-	}
-}
-
-
-static int p4_check_ctrs(struct pt_regs * const regs,
-			 struct op_msrs const * const msrs)
-{
-	unsigned long ctr, low, high, stag, real;
-	int i;
-
-	stag = get_stagger();
-
-	for (i = 0; i < num_counters; ++i) {
-
-		if (!reset_value[i])
-			continue;
-
-		/*
-		 * there is some eccentricity in the hardware which
-		 * requires that we perform 2 extra corrections:
-		 *
-		 * - check both the CCCR:OVF flag for overflow and the
-		 *   counter high bit for un-flagged overflows.
-		 *
-		 * - write the counter back twice to ensure it gets
-		 *   updated properly.
-		 *
-		 * the former seems to be related to extra NMIs happening
-		 * during the current NMI; the latter is reported as errata
-		 * N15 in intel doc 249199-029, pentium 4 specification
-		 * update, though their suggested work-around does not
-		 * appear to solve the problem.
-		 */
-
-		real = VIRT_CTR(stag, i);
-
-		rdmsr(p4_counters[real].cccr_address, low, high);
-		rdmsr(p4_counters[real].counter_address, ctr, high);
-		if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
-			oprofile_add_sample(regs, i);
-			wrmsrl(p4_counters[real].counter_address,
-			       -(u64)reset_value[i]);
-			CCCR_CLEAR_OVF(low);
-			wrmsr(p4_counters[real].cccr_address, low, high);
-			wrmsrl(p4_counters[real].counter_address,
-			       -(u64)reset_value[i]);
-		}
-	}
-
-	/* P4 quirk: you have to re-unmask the apic vector */
-	apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
-
-	/* See op_model_ppro.c */
-	return 1;
-}
-
-
-static void p4_start(struct op_msrs const * const msrs)
-{
-	unsigned int low, high, stag;
-	int i;
-
-	stag = get_stagger();
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[i])
-			continue;
-		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
-		CCCR_SET_ENABLE(low);
-		wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
-	}
-}
-
-
-static void p4_stop(struct op_msrs const * const msrs)
-{
-	unsigned int low, high, stag;
-	int i;
-
-	stag = get_stagger();
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[i])
-			continue;
-		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
-		CCCR_SET_DISABLE(low);
-		wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
-	}
-}
-
-#ifdef CONFIG_SMP
-struct op_x86_model_spec op_p4_ht2_spec = {
-	.num_counters		= NUM_COUNTERS_HT2,
-	.num_controls		= NUM_CONTROLS_HT2,
-	.fill_in_addresses	= &p4_fill_in_addresses,
-	.setup_ctrs		= &p4_setup_ctrs,
-	.check_ctrs		= &p4_check_ctrs,
-	.start			= &p4_start,
-	.stop			= &p4_stop,
-	.shutdown		= &p4_shutdown
-};
-#endif
-
-struct op_x86_model_spec op_p4_spec = {
-	.num_counters		= NUM_COUNTERS_NON_HT,
-	.num_controls		= NUM_CONTROLS_NON_HT,
-	.fill_in_addresses	= &p4_fill_in_addresses,
-	.setup_ctrs		= &p4_setup_ctrs,
-	.check_ctrs		= &p4_check_ctrs,
-	.start			= &p4_start,
-	.stop			= &p4_stop,
-	.shutdown		= &p4_shutdown
-};
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
deleted file mode 100644
index 7913b6921959..000000000000
--- a/arch/x86/oprofile/op_model_ppro.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * @file op_model_ppro.h
- * Family 6 perfmon and architectural perfmon MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Copyright 2008 Intel Corporation
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author Philippe Elie
- * @author Graydon Hoare
- * @author Andi Kleen
- * @author Robert Richter <robert.richter@amd.com>
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <asm/ptrace.h>
-#include <asm/msr.h>
-#include <asm/apic.h>
-#include <asm/nmi.h>
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-static int num_counters = 2;
-static int counter_width = 32;
-
-#define MSR_PPRO_EVENTSEL_RESERVED	((0xFFFFFFFFULL<<32)|(1ULL<<21))
-
-static u64 reset_value[OP_MAX_COUNTER];
-
-static void ppro_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!msrs->counters[i].addr)
-			continue;
-		release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
-		release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
-	}
-}
-
-static int ppro_fill_in_addresses(struct op_msrs * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; i++) {
-		if (!reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
-			goto fail;
-		if (!reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i)) {
-			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
-			goto fail;
-		}
-		/* both registers must be reserved */
-		msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
-		msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
-		continue;
-	fail:
-		if (!counter_config[i].enabled)
-			continue;
-		op_x86_warn_reserved(i);
-		ppro_shutdown(msrs);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-
-static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
-			    struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	if (boot_cpu_has(X86_FEATURE_ARCH_PERFMON)) {
-		union cpuid10_eax eax;
-		eax.full = cpuid_eax(0xa);
-
-		/*
-		 * For Core2 (family 6, model 15), don't reset the
-		 * counter width:
-		 */
-		if (!(eax.split.version_id == 0 &&
-			__this_cpu_read(cpu_info.x86) == 6 &&
-				__this_cpu_read(cpu_info.x86_model) == 15)) {
-
-			if (counter_width < eax.split.bit_width)
-				counter_width = eax.split.bit_width;
-		}
-	}
-
-	/* clear all counters */
-	for (i = 0; i < num_counters; ++i) {
-		if (!msrs->controls[i].addr)
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
-			op_x86_warn_in_use(i);
-		val &= model->reserved;
-		wrmsrl(msrs->controls[i].addr, val);
-		/*
-		 * avoid a false detection of ctr overflows in NMI *
-		 * handler
-		 */
-		wrmsrl(msrs->counters[i].addr, -1LL);
-	}
-
-	/* enable active counters */
-	for (i = 0; i < num_counters; ++i) {
-		if (counter_config[i].enabled && msrs->counters[i].addr) {
-			reset_value[i] = counter_config[i].count;
-			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-			rdmsrl(msrs->controls[i].addr, val);
-			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[i]);
-			wrmsrl(msrs->controls[i].addr, val);
-		} else {
-			reset_value[i] = 0;
-		}
-	}
-}
-
-
-static int ppro_check_ctrs(struct pt_regs * const regs,
-			   struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[i])
-			continue;
-		rdmsrl(msrs->counters[i].addr, val);
-		if (val & (1ULL << (counter_width - 1)))
-			continue;
-		oprofile_add_sample(regs, i);
-		wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-	}
-
-	/* Only P6 based Pentium M need to re-unmask the apic vector but it
-	 * doesn't hurt other P6 variant */
-	apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
-
-	/* We can't work out if we really handled an interrupt. We
-	 * might have caught a *second* counter just after overflowing
-	 * the interrupt for this counter then arrives
-	 * and we don't find a counter that's overflowed, so we
-	 * would return 0 and get dazed + confused. Instead we always
-	 * assume we found an overflow. This sucks.
-	 */
-	return 1;
-}
-
-
-static void ppro_start(struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (reset_value[i]) {
-			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL_ENABLE;
-			wrmsrl(msrs->controls[i].addr, val);
-		}
-	}
-}
-
-
-static void ppro_stop(struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (!reset_value[i])
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-}
-
-struct op_x86_model_spec op_ppro_spec = {
-	.num_counters		= 2,
-	.num_controls		= 2,
-	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
-	.fill_in_addresses	= &ppro_fill_in_addresses,
-	.setup_ctrs		= &ppro_setup_ctrs,
-	.check_ctrs		= &ppro_check_ctrs,
-	.start			= &ppro_start,
-	.stop			= &ppro_stop,
-	.shutdown		= &ppro_shutdown
-};
-
-/*
- * Architectural performance monitoring.
- *
- * Newer Intel CPUs (Core1+) have support for architectural
- * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
- * The advantage of this is that it can be done without knowing about
- * the specific CPU.
- */
-
-static void arch_perfmon_setup_counters(void)
-{
-	union cpuid10_eax eax;
-
-	eax.full = cpuid_eax(0xa);
-
-	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
-	if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 &&
-	    boot_cpu_data.x86_model == 15) {
-		eax.split.version_id = 2;
-		eax.split.num_counters = 2;
-		eax.split.bit_width = 40;
-	}
-
-	num_counters = min((int)eax.split.num_counters, OP_MAX_COUNTER);
-
-	op_arch_perfmon_spec.num_counters = num_counters;
-	op_arch_perfmon_spec.num_controls = num_counters;
-}
-
-static int arch_perfmon_init(struct oprofile_operations *ignore)
-{
-	arch_perfmon_setup_counters();
-	return 0;
-}
-
-struct op_x86_model_spec op_arch_perfmon_spec = {
-	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
-	.init			= &arch_perfmon_init,
-	/* num_counters/num_controls filled in at runtime */
-	.fill_in_addresses	= &ppro_fill_in_addresses,
-	/* user space does the cpuid check for available events */
-	.setup_ctrs		= &ppro_setup_ctrs,
-	.check_ctrs		= &ppro_check_ctrs,
-	.start			= &ppro_start,
-	.stop			= &ppro_stop,
-	.shutdown		= &ppro_shutdown
-};
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
deleted file mode 100644
index 276cf79b5d24..000000000000
--- a/arch/x86/oprofile/op_x86_model.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/**
- * @file op_x86_model.h
- * interface to x86 model-specific MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Graydon Hoare
- * @author Robert Richter <robert.richter@amd.com>
- */
-
-#ifndef OP_X86_MODEL_H
-#define OP_X86_MODEL_H
-
-#include <asm/types.h>
-#include <asm/perf_event.h>
-
-struct op_msr {
-	unsigned long	addr;
-	u64		saved;
-};
-
-struct op_msrs {
-	struct op_msr *counters;
-	struct op_msr *controls;
-	struct op_msr *multiplex;
-};
-
-struct pt_regs;
-
-struct oprofile_operations;
-
-/* The model vtable abstracts the differences between
- * various x86 CPU models' perfctr support.
- */
-struct op_x86_model_spec {
-	unsigned int	num_counters;
-	unsigned int	num_controls;
-	unsigned int	num_virt_counters;
-	u64		reserved;
-	u16		event_mask;
-	int		(*init)(struct oprofile_operations *ops);
-	int		(*fill_in_addresses)(struct op_msrs * const msrs);
-	void		(*setup_ctrs)(struct op_x86_model_spec const *model,
-				      struct op_msrs const * const msrs);
-	int		(*check_ctrs)(struct pt_regs * const regs,
-				      struct op_msrs const * const msrs);
-	void		(*start)(struct op_msrs const * const msrs);
-	void		(*stop)(struct op_msrs const * const msrs);
-	void		(*shutdown)(struct op_msrs const * const msrs);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	void		(*switch_ctrl)(struct op_x86_model_spec const *model,
-				       struct op_msrs const * const msrs);
-#endif
-};
-
-struct op_counter_config;
-
-static inline void op_x86_warn_in_use(int counter)
-{
-	/*
-	 * The warning indicates an already running counter. If
-	 * oprofile doesn't collect data, then try using a different
-	 * performance counter on your platform to monitor the desired
-	 * event. Delete counter #%d from the desired event by editing
-	 * the /usr/share/oprofile/%s/<cpu>/events file. If the event
-	 * cannot be monitored by any other counter, contact your
-	 * hardware or BIOS vendor.
-	 */
-	pr_warn("oprofile: counter #%d on cpu #%d may already be used\n",
-		counter, smp_processor_id());
-}
-
-static inline void op_x86_warn_reserved(int counter)
-{
-	pr_warn("oprofile: counter #%d is already reserved\n", counter);
-}
-
-extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
-			   struct op_counter_config *counter_config);
-extern int op_x86_phys_to_virt(int phys);
-extern int op_x86_virt_to_phys(int virt);
-
-extern struct op_x86_model_spec op_ppro_spec;
-extern struct op_x86_model_spec op_p4_spec;
-extern struct op_x86_model_spec op_p4_ht2_spec;
-extern struct op_x86_model_spec op_amd_spec;
-extern struct op_x86_model_spec op_arch_perfmon_spec;
-
-#endif /* OP_X86_MODEL_H */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 37ce1489364e..9ad6b7b82707 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -32,7 +32,6 @@ config XTENSA
 	select HAVE_FUTEX_CMPXCHG if !MMU
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IRQ_TIME_ACCOUNTING
-	select HAVE_OPROFILE
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_STACKPROTECTOR
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 67a7d151d1e7..cf0940708702 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -83,7 +83,6 @@ core-y		+= $(buildvar) $(buildplf)
 core-y 		+= arch/xtensa/boot/dts/
 
 libs-y		+= arch/xtensa/lib/ $(LIBGCC)
-drivers-$(CONFIG_OPROFILE)	+= arch/xtensa/oprofile/
 
 boot		:= arch/xtensa/boot
 
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
index eeb4c5383c83..3be62da8089b 100644
--- a/arch/xtensa/configs/audio_kc705_defconfig
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -18,7 +18,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_XTENSA_VARIANT_CUSTOM=y
diff --git a/arch/xtensa/configs/generic_kc705_defconfig b/arch/xtensa/configs/generic_kc705_defconfig
index 412f611033cc..e9d6b6f6eca1 100644
--- a/arch/xtensa/configs/generic_kc705_defconfig
+++ b/arch/xtensa/configs/generic_kc705_defconfig
@@ -18,7 +18,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_XTENSA_VARIANT_DC233C=y
diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index 4f1c7998b030..a47c85638ec1 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -18,7 +18,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_XTENSA_VARIANT_CUSTOM=y
diff --git a/arch/xtensa/configs/xip_kc705_defconfig b/arch/xtensa/configs/xip_kc705_defconfig
index f9e85c082afc..4f1ff9531f6a 100644
--- a/arch/xtensa/configs/xip_kc705_defconfig
+++ b/arch/xtensa/configs/xip_kc705_defconfig
@@ -31,7 +31,6 @@ CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB_SOURCE="kc705"
 # CONFIG_PARSE_BOOTPARAM is not set
-CONFIG_OPROFILE=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
diff --git a/arch/xtensa/kernel/stacktrace.c b/arch/xtensa/kernel/stacktrace.c
index c822abb93d20..7f7755cd28f0 100644
--- a/arch/xtensa/kernel/stacktrace.c
+++ b/arch/xtensa/kernel/stacktrace.c
@@ -16,7 +16,7 @@
 #include <asm/traps.h>
 #include <linux/uaccess.h>
 
-#if IS_ENABLED(CONFIG_OPROFILE) || IS_ENABLED(CONFIG_PERF_EVENTS)
+#if IS_ENABLED(CONFIG_PERF_EVENTS)
 
 /* Address of common_exception_return, used to check the
  * transition from kernel to user space.
diff --git a/arch/xtensa/oprofile/Makefile b/arch/xtensa/oprofile/Makefile
deleted file mode 100644
index f559b9ffbb3f..000000000000
--- a/arch/xtensa/oprofile/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
diff --git a/arch/xtensa/oprofile/backtrace.c b/arch/xtensa/oprofile/backtrace.c
deleted file mode 100644
index 8f952034e161..000000000000
--- a/arch/xtensa/oprofile/backtrace.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/**
- * @file backtrace.c
- *
- * @remark Copyright 2008 Tensilica Inc.
- * Copyright (C) 2015 Cadence Design Systems Inc.
- * @remark Read the file COPYING
- *
- */
-
-#include <linux/oprofile.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-
-static int xtensa_backtrace_cb(struct stackframe *frame, void *data)
-{
-	oprofile_add_trace(frame->pc);
-	return 0;
-}
-
-void xtensa_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	if (user_mode(regs))
-		xtensa_backtrace_user(regs, depth, xtensa_backtrace_cb, NULL);
-	else
-		xtensa_backtrace_kernel(regs, depth, xtensa_backtrace_cb,
-					xtensa_backtrace_cb, NULL);
-}
diff --git a/arch/xtensa/oprofile/init.c b/arch/xtensa/oprofile/init.c
deleted file mode 100644
index a67eea379766..000000000000
--- a/arch/xtensa/oprofile/init.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2008 Tensilica Inc.
- * @remark Read the file COPYING
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/oprofile.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-
-extern void xtensa_backtrace(struct pt_regs *const regs, unsigned int depth);
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	ops->backtrace = xtensa_backtrace;
-	return -ENODEV;
-}
-
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c
deleted file mode 100644
index cc917865f13a..000000000000
--- a/drivers/oprofile/buffer_sync.c
+++ /dev/null
@@ -1,591 +0,0 @@
-/**
- * @file buffer_sync.c
- *
- * @remark Copyright 2002-2009 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- * @author Barry Kasindorf
- * @author Robert Richter <robert.richter@amd.com>
- *
- * This is the core of the buffer management. Each
- * CPU buffer is processed and entered into the
- * global event buffer. Such processing is necessary
- * in several circumstances, mentioned below.
- *
- * The processing does the job of converting the
- * transitory EIP value into a persistent dentry/offset
- * value that the profiler can record at its leisure.
- *
- * See fs/dcookies.c for a description of the dentry/offset
- * objects.
- */
-
-#include <linux/file.h>
-#include <linux/mm.h>
-#include <linux/workqueue.h>
-#include <linux/notifier.h>
-#include <linux/dcookies.h>
-#include <linux/profile.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/sched/mm.h>
-#include <linux/sched/task.h>
-#include <linux/gfp.h>
-
-#include "oprofile_stats.h"
-#include "event_buffer.h"
-#include "cpu_buffer.h"
-#include "buffer_sync.h"
-
-static LIST_HEAD(dying_tasks);
-static LIST_HEAD(dead_tasks);
-static cpumask_var_t marked_cpus;
-static DEFINE_SPINLOCK(task_mortuary);
-static void process_task_mortuary(void);
-
-/* Take ownership of the task struct and place it on the
- * list for processing. Only after two full buffer syncs
- * does the task eventually get freed, because by then
- * we are sure we will not reference it again.
- * Can be invoked from softirq via RCU callback due to
- * call_rcu() of the task struct, hence the _irqsave.
- */
-static int
-task_free_notify(struct notifier_block *self, unsigned long val, void *data)
-{
-	unsigned long flags;
-	struct task_struct *task = data;
-	spin_lock_irqsave(&task_mortuary, flags);
-	list_add(&task->tasks, &dying_tasks);
-	spin_unlock_irqrestore(&task_mortuary, flags);
-	return NOTIFY_OK;
-}
-
-
-/* The task is on its way out. A sync of the buffer means we can catch
- * any remaining samples for this task.
- */
-static int
-task_exit_notify(struct notifier_block *self, unsigned long val, void *data)
-{
-	/* To avoid latency problems, we only process the current CPU,
-	 * hoping that most samples for the task are on this CPU
-	 */
-	sync_buffer(raw_smp_processor_id());
-	return 0;
-}
-
-
-/* The task is about to try a do_munmap(). We peek at what it's going to
- * do, and if it's an executable region, process the samples first, so
- * we don't lose any. This does not have to be exact, it's a QoI issue
- * only.
- */
-static int
-munmap_notify(struct notifier_block *self, unsigned long val, void *data)
-{
-	unsigned long addr = (unsigned long)data;
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *mpnt;
-
-	mmap_read_lock(mm);
-
-	mpnt = find_vma(mm, addr);
-	if (mpnt && mpnt->vm_file && (mpnt->vm_flags & VM_EXEC)) {
-		mmap_read_unlock(mm);
-		/* To avoid latency problems, we only process the current CPU,
-		 * hoping that most samples for the task are on this CPU
-		 */
-		sync_buffer(raw_smp_processor_id());
-		return 0;
-	}
-
-	mmap_read_unlock(mm);
-	return 0;
-}
-
-
-/* We need to be told about new modules so we don't attribute to a previously
- * loaded module, or drop the samples on the floor.
- */
-static int
-module_load_notify(struct notifier_block *self, unsigned long val, void *data)
-{
-#ifdef CONFIG_MODULES
-	if (val != MODULE_STATE_COMING)
-		return NOTIFY_DONE;
-
-	/* FIXME: should we process all CPU buffers ? */
-	mutex_lock(&buffer_mutex);
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(MODULE_LOADED_CODE);
-	mutex_unlock(&buffer_mutex);
-#endif
-	return NOTIFY_OK;
-}
-
-
-static struct notifier_block task_free_nb = {
-	.notifier_call	= task_free_notify,
-};
-
-static struct notifier_block task_exit_nb = {
-	.notifier_call	= task_exit_notify,
-};
-
-static struct notifier_block munmap_nb = {
-	.notifier_call	= munmap_notify,
-};
-
-static struct notifier_block module_load_nb = {
-	.notifier_call = module_load_notify,
-};
-
-static void free_all_tasks(void)
-{
-	/* make sure we don't leak task structs */
-	process_task_mortuary();
-	process_task_mortuary();
-}
-
-int sync_start(void)
-{
-	int err;
-
-	if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
-		return -ENOMEM;
-
-	err = task_handoff_register(&task_free_nb);
-	if (err)
-		goto out1;
-	err = profile_event_register(PROFILE_TASK_EXIT, &task_exit_nb);
-	if (err)
-		goto out2;
-	err = profile_event_register(PROFILE_MUNMAP, &munmap_nb);
-	if (err)
-		goto out3;
-	err = register_module_notifier(&module_load_nb);
-	if (err)
-		goto out4;
-
-	start_cpu_work();
-
-out:
-	return err;
-out4:
-	profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
-out3:
-	profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
-out2:
-	task_handoff_unregister(&task_free_nb);
-	free_all_tasks();
-out1:
-	free_cpumask_var(marked_cpus);
-	goto out;
-}
-
-
-void sync_stop(void)
-{
-	end_cpu_work();
-	unregister_module_notifier(&module_load_nb);
-	profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
-	profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
-	task_handoff_unregister(&task_free_nb);
-	barrier();			/* do all of the above first */
-
-	flush_cpu_work();
-
-	free_all_tasks();
-	free_cpumask_var(marked_cpus);
-}
-
-
-/* Optimisation. We can manage without taking the dcookie sem
- * because we cannot reach this code without at least one
- * dcookie user still being registered (namely, the reader
- * of the event buffer). */
-static inline unsigned long fast_get_dcookie(const struct path *path)
-{
-	unsigned long cookie;
-
-	if (path->dentry->d_flags & DCACHE_COOKIE)
-		return (unsigned long)path->dentry;
-	get_dcookie(path, &cookie);
-	return cookie;
-}
-
-
-/* Look up the dcookie for the task's mm->exe_file,
- * which corresponds loosely to "application name". This is
- * not strictly necessary but allows oprofile to associate
- * shared-library samples with particular applications
- */
-static unsigned long get_exec_dcookie(struct mm_struct *mm)
-{
-	unsigned long cookie = NO_COOKIE;
-	struct file *exe_file;
-
-	if (!mm)
-		goto done;
-
-	exe_file = get_mm_exe_file(mm);
-	if (!exe_file)
-		goto done;
-
-	cookie = fast_get_dcookie(&exe_file->f_path);
-	fput(exe_file);
-done:
-	return cookie;
-}
-
-
-/* Convert the EIP value of a sample into a persistent dentry/offset
- * pair that can then be added to the global event buffer. We make
- * sure to do this lookup before a mm->mmap modification happens so
- * we don't lose track.
- *
- * The caller must ensure the mm is not nil (ie: not a kernel thread).
- */
-static unsigned long
-lookup_dcookie(struct mm_struct *mm, unsigned long addr, off_t *offset)
-{
-	unsigned long cookie = NO_COOKIE;
-	struct vm_area_struct *vma;
-
-	mmap_read_lock(mm);
-	for (vma = find_vma(mm, addr); vma; vma = vma->vm_next) {
-
-		if (addr < vma->vm_start || addr >= vma->vm_end)
-			continue;
-
-		if (vma->vm_file) {
-			cookie = fast_get_dcookie(&vma->vm_file->f_path);
-			*offset = (vma->vm_pgoff << PAGE_SHIFT) + addr -
-				vma->vm_start;
-		} else {
-			/* must be an anonymous map */
-			*offset = addr;
-		}
-
-		break;
-	}
-
-	if (!vma)
-		cookie = INVALID_COOKIE;
-	mmap_read_unlock(mm);
-
-	return cookie;
-}
-
-static unsigned long last_cookie = INVALID_COOKIE;
-
-static void add_cpu_switch(int i)
-{
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(CPU_SWITCH_CODE);
-	add_event_entry(i);
-	last_cookie = INVALID_COOKIE;
-}
-
-static void add_kernel_ctx_switch(unsigned int in_kernel)
-{
-	add_event_entry(ESCAPE_CODE);
-	if (in_kernel)
-		add_event_entry(KERNEL_ENTER_SWITCH_CODE);
-	else
-		add_event_entry(KERNEL_EXIT_SWITCH_CODE);
-}
-
-static void
-add_user_ctx_switch(struct task_struct const *task, unsigned long cookie)
-{
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(CTX_SWITCH_CODE);
-	add_event_entry(task->pid);
-	add_event_entry(cookie);
-	/* Another code for daemon back-compat */
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(CTX_TGID_CODE);
-	add_event_entry(task->tgid);
-}
-
-
-static void add_cookie_switch(unsigned long cookie)
-{
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(COOKIE_SWITCH_CODE);
-	add_event_entry(cookie);
-}
-
-
-static void add_trace_begin(void)
-{
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(TRACE_BEGIN_CODE);
-}
-
-static void add_data(struct op_entry *entry, struct mm_struct *mm)
-{
-	unsigned long code, pc, val;
-	unsigned long cookie;
-	off_t offset;
-
-	if (!op_cpu_buffer_get_data(entry, &code))
-		return;
-	if (!op_cpu_buffer_get_data(entry, &pc))
-		return;
-	if (!op_cpu_buffer_get_size(entry))
-		return;
-
-	if (mm) {
-		cookie = lookup_dcookie(mm, pc, &offset);
-
-		if (cookie == NO_COOKIE)
-			offset = pc;
-		if (cookie == INVALID_COOKIE) {
-			atomic_inc(&oprofile_stats.sample_lost_no_mapping);
-			offset = pc;
-		}
-		if (cookie != last_cookie) {
-			add_cookie_switch(cookie);
-			last_cookie = cookie;
-		}
-	} else
-		offset = pc;
-
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(code);
-	add_event_entry(offset);	/* Offset from Dcookie */
-
-	while (op_cpu_buffer_get_data(entry, &val))
-		add_event_entry(val);
-}
-
-static inline void add_sample_entry(unsigned long offset, unsigned long event)
-{
-	add_event_entry(offset);
-	add_event_entry(event);
-}
-
-
-/*
- * Add a sample to the global event buffer. If possible the
- * sample is converted into a persistent dentry/offset pair
- * for later lookup from userspace. Return 0 on failure.
- */
-static int
-add_sample(struct mm_struct *mm, struct op_sample *s, int in_kernel)
-{
-	unsigned long cookie;
-	off_t offset;
-
-	if (in_kernel) {
-		add_sample_entry(s->eip, s->event);
-		return 1;
-	}
-
-	/* add userspace sample */
-
-	if (!mm) {
-		atomic_inc(&oprofile_stats.sample_lost_no_mm);
-		return 0;
-	}
-
-	cookie = lookup_dcookie(mm, s->eip, &offset);
-
-	if (cookie == INVALID_COOKIE) {
-		atomic_inc(&oprofile_stats.sample_lost_no_mapping);
-		return 0;
-	}
-
-	if (cookie != last_cookie) {
-		add_cookie_switch(cookie);
-		last_cookie = cookie;
-	}
-
-	add_sample_entry(offset, s->event);
-
-	return 1;
-}
-
-
-static void release_mm(struct mm_struct *mm)
-{
-	if (!mm)
-		return;
-	mmput(mm);
-}
-
-static inline int is_code(unsigned long val)
-{
-	return val == ESCAPE_CODE;
-}
-
-
-/* Move tasks along towards death. Any tasks on dead_tasks
- * will definitely have no remaining references in any
- * CPU buffers at this point, because we use two lists,
- * and to have reached the list, it must have gone through
- * one full sync already.
- */
-static void process_task_mortuary(void)
-{
-	unsigned long flags;
-	LIST_HEAD(local_dead_tasks);
-	struct task_struct *task;
-	struct task_struct *ttask;
-
-	spin_lock_irqsave(&task_mortuary, flags);
-
-	list_splice_init(&dead_tasks, &local_dead_tasks);
-	list_splice_init(&dying_tasks, &dead_tasks);
-
-	spin_unlock_irqrestore(&task_mortuary, flags);
-
-	list_for_each_entry_safe(task, ttask, &local_dead_tasks, tasks) {
-		list_del(&task->tasks);
-		free_task(task);
-	}
-}
-
-
-static void mark_done(int cpu)
-{
-	int i;
-
-	cpumask_set_cpu(cpu, marked_cpus);
-
-	for_each_online_cpu(i) {
-		if (!cpumask_test_cpu(i, marked_cpus))
-			return;
-	}
-
-	/* All CPUs have been processed at least once,
-	 * we can process the mortuary once
-	 */
-	process_task_mortuary();
-
-	cpumask_clear(marked_cpus);
-}
-
-
-/* FIXME: this is not sufficient if we implement syscall barrier backtrace
- * traversal, the code switch to sb_sample_start at first kernel enter/exit
- * switch so we need a fifth state and some special handling in sync_buffer()
- */
-typedef enum {
-	sb_bt_ignore = -2,
-	sb_buffer_start,
-	sb_bt_start,
-	sb_sample_start,
-} sync_buffer_state;
-
-/* Sync one of the CPU's buffers into the global event buffer.
- * Here we need to go through each batch of samples punctuated
- * by context switch notes, taking the task's mmap_lock and doing
- * lookup in task->mm->mmap to convert EIP into dcookie/offset
- * value.
- */
-void sync_buffer(int cpu)
-{
-	struct mm_struct *mm = NULL;
-	struct mm_struct *oldmm;
-	unsigned long val;
-	struct task_struct *new;
-	unsigned long cookie = 0;
-	int in_kernel = 1;
-	sync_buffer_state state = sb_buffer_start;
-	unsigned int i;
-	unsigned long available;
-	unsigned long flags;
-	struct op_entry entry;
-	struct op_sample *sample;
-
-	mutex_lock(&buffer_mutex);
-
-	add_cpu_switch(cpu);
-
-	op_cpu_buffer_reset(cpu);
-	available = op_cpu_buffer_entries(cpu);
-
-	for (i = 0; i < available; ++i) {
-		sample = op_cpu_buffer_read_entry(&entry, cpu);
-		if (!sample)
-			break;
-
-		if (is_code(sample->eip)) {
-			flags = sample->event;
-			if (flags & TRACE_BEGIN) {
-				state = sb_bt_start;
-				add_trace_begin();
-			}
-			if (flags & KERNEL_CTX_SWITCH) {
-				/* kernel/userspace switch */
-				in_kernel = flags & IS_KERNEL;
-				if (state == sb_buffer_start)
-					state = sb_sample_start;
-				add_kernel_ctx_switch(flags & IS_KERNEL);
-			}
-			if (flags & USER_CTX_SWITCH
-			    && op_cpu_buffer_get_data(&entry, &val)) {
-				/* userspace context switch */
-				new = (struct task_struct *)val;
-				oldmm = mm;
-				release_mm(oldmm);
-				mm = get_task_mm(new);
-				if (mm != oldmm)
-					cookie = get_exec_dcookie(mm);
-				add_user_ctx_switch(new, cookie);
-			}
-			if (op_cpu_buffer_get_size(&entry))
-				add_data(&entry, mm);
-			continue;
-		}
-
-		if (state < sb_bt_start)
-			/* ignore sample */
-			continue;
-
-		if (add_sample(mm, sample, in_kernel))
-			continue;
-
-		/* ignore backtraces if failed to add a sample */
-		if (state == sb_bt_start) {
-			state = sb_bt_ignore;
-			atomic_inc(&oprofile_stats.bt_lost_no_mapping);
-		}
-	}
-	release_mm(mm);
-
-	mark_done(cpu);
-
-	mutex_unlock(&buffer_mutex);
-}
-
-/* The function can be used to add a buffer worth of data directly to
- * the kernel buffer. The buffer is assumed to be a circular buffer.
- * Take the entries from index start and end at index end, wrapping
- * at max_entries.
- */
-void oprofile_put_buff(unsigned long *buf, unsigned int start,
-		       unsigned int stop, unsigned int max)
-{
-	int i;
-
-	i = start;
-
-	mutex_lock(&buffer_mutex);
-	while (i != stop) {
-		add_event_entry(buf[i++]);
-
-		if (i >= max)
-			i = 0;
-	}
-
-	mutex_unlock(&buffer_mutex);
-}
-
diff --git a/drivers/oprofile/buffer_sync.h b/drivers/oprofile/buffer_sync.h
deleted file mode 100644
index 3110732c1835..000000000000
--- a/drivers/oprofile/buffer_sync.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/**
- * @file buffer_sync.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#ifndef OPROFILE_BUFFER_SYNC_H
-#define OPROFILE_BUFFER_SYNC_H
-
-/* add the necessary profiling hooks */
-int sync_start(void);
-
-/* remove the hooks */
-void sync_stop(void);
-
-/* sync the given CPU's buffer */
-void sync_buffer(int cpu);
-
-#endif /* OPROFILE_BUFFER_SYNC_H */
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
deleted file mode 100644
index 9210a95cb4e6..000000000000
--- a/drivers/oprofile/cpu_buffer.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/**
- * @file cpu_buffer.c
- *
- * @remark Copyright 2002-2009 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- * @author Barry Kasindorf <barry.kasindorf@amd.com>
- * @author Robert Richter <robert.richter@amd.com>
- *
- * Each CPU has a local buffer that stores PC value/event
- * pairs. We also log context switches when we notice them.
- * Eventually each CPU's buffer is processed into the global
- * event buffer by sync_buffer().
- *
- * We use a local buffer for two reasons: an NMI or similar
- * interrupt cannot synchronise, and high sampling rates
- * would lead to catastrophic global synchronisation if
- * a global buffer was used.
- */
-
-#include <linux/sched.h>
-#include <linux/oprofile.h>
-#include <linux/errno.h>
-
-#include <asm/ptrace.h>
-
-#include "event_buffer.h"
-#include "cpu_buffer.h"
-#include "buffer_sync.h"
-#include "oprof.h"
-
-#define OP_BUFFER_FLAGS	0
-
-static struct trace_buffer *op_ring_buffer;
-DEFINE_PER_CPU(struct oprofile_cpu_buffer, op_cpu_buffer);
-
-static void wq_sync_buffer(struct work_struct *work);
-
-#define DEFAULT_TIMER_EXPIRE (HZ / 10)
-static int work_enabled;
-
-unsigned long oprofile_get_cpu_buffer_size(void)
-{
-	return oprofile_cpu_buffer_size;
-}
-
-void oprofile_cpu_buffer_inc_smpl_lost(void)
-{
-	struct oprofile_cpu_buffer *cpu_buf = this_cpu_ptr(&op_cpu_buffer);
-
-	cpu_buf->sample_lost_overflow++;
-}
-
-void free_cpu_buffers(void)
-{
-	if (op_ring_buffer)
-		ring_buffer_free(op_ring_buffer);
-	op_ring_buffer = NULL;
-}
-
-#define RB_EVENT_HDR_SIZE 4
-
-int alloc_cpu_buffers(void)
-{
-	int i;
-
-	unsigned long buffer_size = oprofile_cpu_buffer_size;
-	unsigned long byte_size = buffer_size * (sizeof(struct op_sample) +
-						 RB_EVENT_HDR_SIZE);
-
-	op_ring_buffer = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS);
-	if (!op_ring_buffer)
-		goto fail;
-
-	for_each_possible_cpu(i) {
-		struct oprofile_cpu_buffer *b = &per_cpu(op_cpu_buffer, i);
-
-		b->last_task = NULL;
-		b->last_is_kernel = -1;
-		b->tracing = 0;
-		b->buffer_size = buffer_size;
-		b->sample_received = 0;
-		b->sample_lost_overflow = 0;
-		b->backtrace_aborted = 0;
-		b->sample_invalid_eip = 0;
-		b->cpu = i;
-		INIT_DELAYED_WORK(&b->work, wq_sync_buffer);
-	}
-	return 0;
-
-fail:
-	free_cpu_buffers();
-	return -ENOMEM;
-}
-
-void start_cpu_work(void)
-{
-	int i;
-
-	work_enabled = 1;
-
-	for_each_online_cpu(i) {
-		struct oprofile_cpu_buffer *b = &per_cpu(op_cpu_buffer, i);
-
-		/*
-		 * Spread the work by 1 jiffy per cpu so they dont all
-		 * fire at once.
-		 */
-		schedule_delayed_work_on(i, &b->work, DEFAULT_TIMER_EXPIRE + i);
-	}
-}
-
-void end_cpu_work(void)
-{
-	work_enabled = 0;
-}
-
-void flush_cpu_work(void)
-{
-	int i;
-
-	for_each_online_cpu(i) {
-		struct oprofile_cpu_buffer *b = &per_cpu(op_cpu_buffer, i);
-
-		/* these works are per-cpu, no need for flush_sync */
-		flush_delayed_work(&b->work);
-	}
-}
-
-/*
- * This function prepares the cpu buffer to write a sample.
- *
- * Struct op_entry is used during operations on the ring buffer while
- * struct op_sample contains the data that is stored in the ring
- * buffer. Struct entry can be uninitialized. The function reserves a
- * data array that is specified by size. Use
- * op_cpu_buffer_write_commit() after preparing the sample. In case of
- * errors a null pointer is returned, otherwise the pointer to the
- * sample.
- *
- */
-struct op_sample
-*op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size)
-{
-	entry->event = ring_buffer_lock_reserve
-		(op_ring_buffer, sizeof(struct op_sample) +
-		 size * sizeof(entry->sample->data[0]));
-	if (!entry->event)
-		return NULL;
-	entry->sample = ring_buffer_event_data(entry->event);
-	entry->size = size;
-	entry->data = entry->sample->data;
-
-	return entry->sample;
-}
-
-int op_cpu_buffer_write_commit(struct op_entry *entry)
-{
-	return ring_buffer_unlock_commit(op_ring_buffer, entry->event);
-}
-
-struct op_sample *op_cpu_buffer_read_entry(struct op_entry *entry, int cpu)
-{
-	struct ring_buffer_event *e;
-	e = ring_buffer_consume(op_ring_buffer, cpu, NULL, NULL);
-	if (!e)
-		return NULL;
-
-	entry->event = e;
-	entry->sample = ring_buffer_event_data(e);
-	entry->size = (ring_buffer_event_length(e) - sizeof(struct op_sample))
-		/ sizeof(entry->sample->data[0]);
-	entry->data = entry->sample->data;
-	return entry->sample;
-}
-
-unsigned long op_cpu_buffer_entries(int cpu)
-{
-	return ring_buffer_entries_cpu(op_ring_buffer, cpu);
-}
-
-static int
-op_add_code(struct oprofile_cpu_buffer *cpu_buf, unsigned long backtrace,
-	    int is_kernel, struct task_struct *task)
-{
-	struct op_entry entry;
-	struct op_sample *sample;
-	unsigned long flags;
-	int size;
-
-	flags = 0;
-
-	if (backtrace)
-		flags |= TRACE_BEGIN;
-
-	/* notice a switch from user->kernel or vice versa */
-	is_kernel = !!is_kernel;
-	if (cpu_buf->last_is_kernel != is_kernel) {
-		cpu_buf->last_is_kernel = is_kernel;
-		flags |= KERNEL_CTX_SWITCH;
-		if (is_kernel)
-			flags |= IS_KERNEL;
-	}
-
-	/* notice a task switch */
-	if (cpu_buf->last_task != task) {
-		cpu_buf->last_task = task;
-		flags |= USER_CTX_SWITCH;
-	}
-
-	if (!flags)
-		/* nothing to do */
-		return 0;
-
-	if (flags & USER_CTX_SWITCH)
-		size = 1;
-	else
-		size = 0;
-
-	sample = op_cpu_buffer_write_reserve(&entry, size);
-	if (!sample)
-		return -ENOMEM;
-
-	sample->eip = ESCAPE_CODE;
-	sample->event = flags;
-
-	if (size)
-		op_cpu_buffer_add_data(&entry, (unsigned long)task);
-
-	op_cpu_buffer_write_commit(&entry);
-
-	return 0;
-}
-
-static inline int
-op_add_sample(struct oprofile_cpu_buffer *cpu_buf,
-	      unsigned long pc, unsigned long event)
-{
-	struct op_entry entry;
-	struct op_sample *sample;
-
-	sample = op_cpu_buffer_write_reserve(&entry, 0);
-	if (!sample)
-		return -ENOMEM;
-
-	sample->eip = pc;
-	sample->event = event;
-
-	return op_cpu_buffer_write_commit(&entry);
-}
-
-/*
- * This must be safe from any context.
- *
- * is_kernel is needed because on some architectures you cannot
- * tell if you are in kernel or user space simply by looking at
- * pc. We tag this in the buffer by generating kernel enter/exit
- * events whenever is_kernel changes
- */
-static int
-log_sample(struct oprofile_cpu_buffer *cpu_buf, unsigned long pc,
-	   unsigned long backtrace, int is_kernel, unsigned long event,
-	   struct task_struct *task)
-{
-	struct task_struct *tsk = task ? task : current;
-	cpu_buf->sample_received++;
-
-	if (pc == ESCAPE_CODE) {
-		cpu_buf->sample_invalid_eip++;
-		return 0;
-	}
-
-	if (op_add_code(cpu_buf, backtrace, is_kernel, tsk))
-		goto fail;
-
-	if (op_add_sample(cpu_buf, pc, event))
-		goto fail;
-
-	return 1;
-
-fail:
-	cpu_buf->sample_lost_overflow++;
-	return 0;
-}
-
-static inline void oprofile_begin_trace(struct oprofile_cpu_buffer *cpu_buf)
-{
-	cpu_buf->tracing = 1;
-}
-
-static inline void oprofile_end_trace(struct oprofile_cpu_buffer *cpu_buf)
-{
-	cpu_buf->tracing = 0;
-}
-
-static inline void
-__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
-			  unsigned long event, int is_kernel,
-			  struct task_struct *task)
-{
-	struct oprofile_cpu_buffer *cpu_buf = this_cpu_ptr(&op_cpu_buffer);
-	unsigned long backtrace = oprofile_backtrace_depth;
-
-	/*
-	 * if log_sample() fail we can't backtrace since we lost the
-	 * source of this event
-	 */
-	if (!log_sample(cpu_buf, pc, backtrace, is_kernel, event, task))
-		/* failed */
-		return;
-
-	if (!backtrace)
-		return;
-
-	oprofile_begin_trace(cpu_buf);
-	oprofile_ops.backtrace(regs, backtrace);
-	oprofile_end_trace(cpu_buf);
-}
-
-void oprofile_add_ext_hw_sample(unsigned long pc, struct pt_regs * const regs,
-				unsigned long event, int is_kernel,
-				struct task_struct *task)
-{
-	__oprofile_add_ext_sample(pc, regs, event, is_kernel, task);
-}
-
-void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
-			     unsigned long event, int is_kernel)
-{
-	__oprofile_add_ext_sample(pc, regs, event, is_kernel, NULL);
-}
-
-void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
-{
-	int is_kernel;
-	unsigned long pc;
-
-	if (likely(regs)) {
-		is_kernel = !user_mode(regs);
-		pc = profile_pc(regs);
-	} else {
-		is_kernel = 0;    /* This value will not be used */
-		pc = ESCAPE_CODE; /* as this causes an early return. */
-	}
-
-	__oprofile_add_ext_sample(pc, regs, event, is_kernel, NULL);
-}
-
-/*
- * Add samples with data to the ring buffer.
- *
- * Use oprofile_add_data(&entry, val) to add data and
- * oprofile_write_commit(&entry) to commit the sample.
- */
-void
-oprofile_write_reserve(struct op_entry *entry, struct pt_regs * const regs,
-		       unsigned long pc, int code, int size)
-{
-	struct op_sample *sample;
-	int is_kernel = !user_mode(regs);
-	struct oprofile_cpu_buffer *cpu_buf = this_cpu_ptr(&op_cpu_buffer);
-
-	cpu_buf->sample_received++;
-
-	/* no backtraces for samples with data */
-	if (op_add_code(cpu_buf, 0, is_kernel, current))
-		goto fail;
-
-	sample = op_cpu_buffer_write_reserve(entry, size + 2);
-	if (!sample)
-		goto fail;
-	sample->eip = ESCAPE_CODE;
-	sample->event = 0;		/* no flags */
-
-	op_cpu_buffer_add_data(entry, code);
-	op_cpu_buffer_add_data(entry, pc);
-
-	return;
-
-fail:
-	entry->event = NULL;
-	cpu_buf->sample_lost_overflow++;
-}
-
-int oprofile_add_data(struct op_entry *entry, unsigned long val)
-{
-	if (!entry->event)
-		return 0;
-	return op_cpu_buffer_add_data(entry, val);
-}
-
-int oprofile_add_data64(struct op_entry *entry, u64 val)
-{
-	if (!entry->event)
-		return 0;
-	if (op_cpu_buffer_get_size(entry) < 2)
-		/*
-		 * the function returns 0 to indicate a too small
-		 * buffer, even if there is some space left
-		 */
-		return 0;
-	if (!op_cpu_buffer_add_data(entry, (u32)val))
-		return 0;
-	return op_cpu_buffer_add_data(entry, (u32)(val >> 32));
-}
-
-int oprofile_write_commit(struct op_entry *entry)
-{
-	if (!entry->event)
-		return -EINVAL;
-	return op_cpu_buffer_write_commit(entry);
-}
-
-void oprofile_add_pc(unsigned long pc, int is_kernel, unsigned long event)
-{
-	struct oprofile_cpu_buffer *cpu_buf = this_cpu_ptr(&op_cpu_buffer);
-	log_sample(cpu_buf, pc, 0, is_kernel, event, NULL);
-}
-
-void oprofile_add_trace(unsigned long pc)
-{
-	struct oprofile_cpu_buffer *cpu_buf = this_cpu_ptr(&op_cpu_buffer);
-
-	if (!cpu_buf->tracing)
-		return;
-
-	/*
-	 * broken frame can give an eip with the same value as an
-	 * escape code, abort the trace if we get it
-	 */
-	if (pc == ESCAPE_CODE)
-		goto fail;
-
-	if (op_add_sample(cpu_buf, pc, 0))
-		goto fail;
-
-	return;
-fail:
-	cpu_buf->tracing = 0;
-	cpu_buf->backtrace_aborted++;
-	return;
-}
-
-/*
- * This serves to avoid cpu buffer overflow, and makes sure
- * the task mortuary progresses
- *
- * By using schedule_delayed_work_on and then schedule_delayed_work
- * we guarantee this will stay on the correct cpu
- */
-static void wq_sync_buffer(struct work_struct *work)
-{
-	struct oprofile_cpu_buffer *b =
-		container_of(work, struct oprofile_cpu_buffer, work.work);
-	if (b->cpu != smp_processor_id() && !cpu_online(b->cpu)) {
-		cancel_delayed_work(&b->work);
-		return;
-	}
-	sync_buffer(b->cpu);
-
-	/* don't re-add the work if we're shutting down */
-	if (work_enabled)
-		schedule_delayed_work(&b->work, DEFAULT_TIMER_EXPIRE);
-}
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
deleted file mode 100644
index 31478c0cff87..000000000000
--- a/drivers/oprofile/cpu_buffer.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/**
- * @file cpu_buffer.h
- *
- * @remark Copyright 2002-2009 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- * @author Robert Richter <robert.richter@amd.com>
- */
-
-#ifndef OPROFILE_CPU_BUFFER_H
-#define OPROFILE_CPU_BUFFER_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/cache.h>
-#include <linux/sched.h>
-#include <linux/ring_buffer.h>
-
-struct task_struct;
-
-int alloc_cpu_buffers(void);
-void free_cpu_buffers(void);
-
-void start_cpu_work(void);
-void end_cpu_work(void);
-void flush_cpu_work(void);
-
-/* CPU buffer is composed of such entries (which are
- * also used for context switch notes)
- */
-struct op_sample {
-	unsigned long eip;
-	unsigned long event;
-	unsigned long data[];
-};
-
-struct op_entry;
-
-struct oprofile_cpu_buffer {
-	unsigned long buffer_size;
-	struct task_struct *last_task;
-	int last_is_kernel;
-	int tracing;
-	unsigned long sample_received;
-	unsigned long sample_lost_overflow;
-	unsigned long backtrace_aborted;
-	unsigned long sample_invalid_eip;
-	int cpu;
-	struct delayed_work work;
-};
-
-DECLARE_PER_CPU(struct oprofile_cpu_buffer, op_cpu_buffer);
-
-/*
- * Resets the cpu buffer to a sane state.
- *
- * reset these to invalid values; the next sample collected will
- * populate the buffer with proper values to initialize the buffer
- */
-static inline void op_cpu_buffer_reset(int cpu)
-{
-	struct oprofile_cpu_buffer *cpu_buf = &per_cpu(op_cpu_buffer, cpu);
-
-	cpu_buf->last_is_kernel = -1;
-	cpu_buf->last_task = NULL;
-}
-
-/*
- * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be
- * called only if op_cpu_buffer_write_reserve() did not return NULL or
- * entry->event != NULL, otherwise entry->size or entry->event will be
- * used uninitialized.
- */
-
-struct op_sample
-*op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size);
-int op_cpu_buffer_write_commit(struct op_entry *entry);
-struct op_sample *op_cpu_buffer_read_entry(struct op_entry *entry, int cpu);
-unsigned long op_cpu_buffer_entries(int cpu);
-
-/* returns the remaining free size of data in the entry */
-static inline
-int op_cpu_buffer_add_data(struct op_entry *entry, unsigned long val)
-{
-	if (!entry->size)
-		return 0;
-	*entry->data = val;
-	entry->size--;
-	entry->data++;
-	return entry->size;
-}
-
-/* returns the size of data in the entry */
-static inline
-int op_cpu_buffer_get_size(struct op_entry *entry)
-{
-	return entry->size;
-}
-
-/* returns 0 if empty or the size of data including the current value */
-static inline
-int op_cpu_buffer_get_data(struct op_entry *entry, unsigned long *val)
-{
-	int size = entry->size;
-	if (!size)
-		return 0;
-	*val = *entry->data;
-	entry->size--;
-	entry->data++;
-	return size;
-}
-
-/* extra data flags */
-#define KERNEL_CTX_SWITCH	(1UL << 0)
-#define IS_KERNEL		(1UL << 1)
-#define TRACE_BEGIN		(1UL << 2)
-#define USER_CTX_SWITCH		(1UL << 3)
-
-#endif /* OPROFILE_CPU_BUFFER_H */
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
deleted file mode 100644
index 6c9edc8bbc95..000000000000
--- a/drivers/oprofile/event_buffer.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/**
- * @file event_buffer.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- *
- * This is the global event buffer that the user-space
- * daemon reads from. The event buffer is an untyped array
- * of unsigned longs. Entries are prefixed by the
- * escape value ESCAPE_CODE followed by an identifying code.
- */
-
-#include <linux/vmalloc.h>
-#include <linux/oprofile.h>
-#include <linux/sched/signal.h>
-#include <linux/capability.h>
-#include <linux/dcookies.h>
-#include <linux/fs.h>
-#include <linux/uaccess.h>
-
-#include "oprof.h"
-#include "event_buffer.h"
-#include "oprofile_stats.h"
-
-DEFINE_MUTEX(buffer_mutex);
-
-static unsigned long buffer_opened;
-static DECLARE_WAIT_QUEUE_HEAD(buffer_wait);
-static unsigned long *event_buffer;
-static unsigned long buffer_size;
-static unsigned long buffer_watershed;
-static size_t buffer_pos;
-/* atomic_t because wait_event checks it outside of buffer_mutex */
-static atomic_t buffer_ready = ATOMIC_INIT(0);
-
-/*
- * Add an entry to the event buffer. When we get near to the end we
- * wake up the process sleeping on the read() of the file. To protect
- * the event_buffer this function may only be called when buffer_mutex
- * is set.
- */
-void add_event_entry(unsigned long value)
-{
-	/*
-	 * This shouldn't happen since all workqueues or handlers are
-	 * canceled or flushed before the event buffer is freed.
-	 */
-	if (!event_buffer) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-
-	if (buffer_pos == buffer_size) {
-		atomic_inc(&oprofile_stats.event_lost_overflow);
-		return;
-	}
-
-	event_buffer[buffer_pos] = value;
-	if (++buffer_pos == buffer_size - buffer_watershed) {
-		atomic_set(&buffer_ready, 1);
-		wake_up(&buffer_wait);
-	}
-}
-
-
-/* Wake up the waiting process if any. This happens
- * on "echo 0 >/dev/oprofile/enable" so the daemon
- * processes the data remaining in the event buffer.
- */
-void wake_up_buffer_waiter(void)
-{
-	mutex_lock(&buffer_mutex);
-	atomic_set(&buffer_ready, 1);
-	wake_up(&buffer_wait);
-	mutex_unlock(&buffer_mutex);
-}
-
-
-int alloc_event_buffer(void)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&oprofilefs_lock, flags);
-	buffer_size = oprofile_buffer_size;
-	buffer_watershed = oprofile_buffer_watershed;
-	raw_spin_unlock_irqrestore(&oprofilefs_lock, flags);
-
-	if (buffer_watershed >= buffer_size)
-		return -EINVAL;
-
-	buffer_pos = 0;
-	event_buffer = vmalloc(array_size(buffer_size, sizeof(unsigned long)));
-	if (!event_buffer)
-		return -ENOMEM;
-
-	return 0;
-}
-
-
-void free_event_buffer(void)
-{
-	mutex_lock(&buffer_mutex);
-	vfree(event_buffer);
-	buffer_pos = 0;
-	event_buffer = NULL;
-	mutex_unlock(&buffer_mutex);
-}
-
-
-static int event_buffer_open(struct inode *inode, struct file *file)
-{
-	int err = -EPERM;
-
-	if (!perfmon_capable())
-		return -EPERM;
-
-	if (test_and_set_bit_lock(0, &buffer_opened))
-		return -EBUSY;
-
-	/* Register as a user of dcookies
-	 * to ensure they persist for the lifetime of
-	 * the open event file
-	 */
-	err = -EINVAL;
-	file->private_data = dcookie_register();
-	if (!file->private_data)
-		goto out;
-
-	if ((err = oprofile_setup()))
-		goto fail;
-
-	/* NB: the actual start happens from userspace
-	 * echo 1 >/dev/oprofile/enable
-	 */
-
-	return nonseekable_open(inode, file);
-
-fail:
-	dcookie_unregister(file->private_data);
-out:
-	__clear_bit_unlock(0, &buffer_opened);
-	return err;
-}
-
-
-static int event_buffer_release(struct inode *inode, struct file *file)
-{
-	oprofile_stop();
-	oprofile_shutdown();
-	dcookie_unregister(file->private_data);
-	buffer_pos = 0;
-	atomic_set(&buffer_ready, 0);
-	__clear_bit_unlock(0, &buffer_opened);
-	return 0;
-}
-
-
-static ssize_t event_buffer_read(struct file *file, char __user *buf,
-				 size_t count, loff_t *offset)
-{
-	int retval = -EINVAL;
-	size_t const max = buffer_size * sizeof(unsigned long);
-
-	/* handling partial reads is more trouble than it's worth */
-	if (count != max || *offset)
-		return -EINVAL;
-
-	wait_event_interruptible(buffer_wait, atomic_read(&buffer_ready));
-
-	if (signal_pending(current))
-		return -EINTR;
-
-	/* can't currently happen */
-	if (!atomic_read(&buffer_ready))
-		return -EAGAIN;
-
-	mutex_lock(&buffer_mutex);
-
-	/* May happen if the buffer is freed during pending reads. */
-	if (!event_buffer) {
-		retval = -EINTR;
-		goto out;
-	}
-
-	atomic_set(&buffer_ready, 0);
-
-	retval = -EFAULT;
-
-	count = buffer_pos * sizeof(unsigned long);
-
-	if (copy_to_user(buf, event_buffer, count))
-		goto out;
-
-	retval = count;
-	buffer_pos = 0;
-
-out:
-	mutex_unlock(&buffer_mutex);
-	return retval;
-}
-
-const struct file_operations event_buffer_fops = {
-	.open		= event_buffer_open,
-	.release	= event_buffer_release,
-	.read		= event_buffer_read,
-	.llseek		= no_llseek,
-};
diff --git a/drivers/oprofile/event_buffer.h b/drivers/oprofile/event_buffer.h
deleted file mode 100644
index a8d5bb3cba89..000000000000
--- a/drivers/oprofile/event_buffer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/**
- * @file event_buffer.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#ifndef EVENT_BUFFER_H
-#define EVENT_BUFFER_H
-
-#include <linux/types.h>
-#include <linux/mutex.h>
-
-int alloc_event_buffer(void);
-
-void free_event_buffer(void);
-
-/**
- * Add data to the event buffer.
- * The data passed is free-form, but typically consists of
- * file offsets, dcookies, context information, and ESCAPE codes.
- */
-void add_event_entry(unsigned long data);
-
-/* wake up the process sleeping on the event file */
-void wake_up_buffer_waiter(void);
-
-#define INVALID_COOKIE ~0UL
-#define NO_COOKIE 0UL
-
-extern const struct file_operations event_buffer_fops;
-
-/* mutex between sync_cpu_buffers() and the
- * file reading code.
- */
-extern struct mutex buffer_mutex;
-
-#endif /* EVENT_BUFFER_H */
diff --git a/drivers/oprofile/nmi_timer_int.c b/drivers/oprofile/nmi_timer_int.c
deleted file mode 100644
index f343bd96609a..000000000000
--- a/drivers/oprofile/nmi_timer_int.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/**
- * @file nmi_timer_int.c
- *
- * @remark Copyright 2011 Advanced Micro Devices, Inc.
- *
- * @author Robert Richter <robert.richter@amd.com>
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/oprofile.h>
-#include <linux/perf_event.h>
-
-#ifdef CONFIG_OPROFILE_NMI_TIMER
-
-static DEFINE_PER_CPU(struct perf_event *, nmi_timer_events);
-static int ctr_running;
-
-static struct perf_event_attr nmi_timer_attr = {
-	.type           = PERF_TYPE_HARDWARE,
-	.config         = PERF_COUNT_HW_CPU_CYCLES,
-	.size           = sizeof(struct perf_event_attr),
-	.pinned         = 1,
-	.disabled       = 1,
-};
-
-static void nmi_timer_callback(struct perf_event *event,
-			       struct perf_sample_data *data,
-			       struct pt_regs *regs)
-{
-	event->hw.interrupts = 0;       /* don't throttle interrupts */
-	oprofile_add_sample(regs, 0);
-}
-
-static int nmi_timer_start_cpu(int cpu)
-{
-	struct perf_event *event = per_cpu(nmi_timer_events, cpu);
-
-	if (!event) {
-		event = perf_event_create_kernel_counter(&nmi_timer_attr, cpu, NULL,
-							 nmi_timer_callback, NULL);
-		if (IS_ERR(event))
-			return PTR_ERR(event);
-		per_cpu(nmi_timer_events, cpu) = event;
-	}
-
-	if (event && ctr_running)
-		perf_event_enable(event);
-
-	return 0;
-}
-
-static void nmi_timer_stop_cpu(int cpu)
-{
-	struct perf_event *event = per_cpu(nmi_timer_events, cpu);
-
-	if (event && ctr_running)
-		perf_event_disable(event);
-}
-
-static int nmi_timer_cpu_online(unsigned int cpu)
-{
-	nmi_timer_start_cpu(cpu);
-	return 0;
-}
-static int nmi_timer_cpu_predown(unsigned int cpu)
-{
-	nmi_timer_stop_cpu(cpu);
-	return 0;
-}
-
-static int nmi_timer_start(void)
-{
-	int cpu;
-
-	get_online_cpus();
-	ctr_running = 1;
-	for_each_online_cpu(cpu)
-		nmi_timer_start_cpu(cpu);
-	put_online_cpus();
-
-	return 0;
-}
-
-static void nmi_timer_stop(void)
-{
-	int cpu;
-
-	get_online_cpus();
-	for_each_online_cpu(cpu)
-		nmi_timer_stop_cpu(cpu);
-	ctr_running = 0;
-	put_online_cpus();
-}
-
-static enum cpuhp_state hp_online;
-
-static void nmi_timer_shutdown(void)
-{
-	struct perf_event *event;
-	int cpu;
-
-	cpuhp_remove_state(hp_online);
-	for_each_possible_cpu(cpu) {
-		event = per_cpu(nmi_timer_events, cpu);
-		if (!event)
-			continue;
-		perf_event_disable(event);
-		per_cpu(nmi_timer_events, cpu) = NULL;
-		perf_event_release_kernel(event);
-	}
-}
-
-static int nmi_timer_setup(void)
-{
-	int err;
-	u64 period;
-
-	/* clock cycles per tick: */
-	period = (u64)cpu_khz * 1000;
-	do_div(period, HZ);
-	nmi_timer_attr.sample_period = period;
-
-	err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "oprofile/nmi:online",
-				nmi_timer_cpu_online, nmi_timer_cpu_predown);
-	if (err < 0) {
-		nmi_timer_shutdown();
-		return err;
-	}
-	hp_online = err;
-	return 0;
-}
-
-int __init op_nmi_timer_init(struct oprofile_operations *ops)
-{
-	int err = 0;
-
-	err = nmi_timer_setup();
-	if (err)
-		return err;
-	nmi_timer_shutdown();		/* only check, don't alloc */
-
-	ops->create_files	= NULL;
-	ops->setup		= nmi_timer_setup;
-	ops->shutdown		= nmi_timer_shutdown;
-	ops->start		= nmi_timer_start;
-	ops->stop		= nmi_timer_stop;
-	ops->cpu_type		= "timer";
-
-	printk(KERN_INFO "oprofile: using NMI timer interrupt.\n");
-
-	return 0;
-}
-
-#endif
diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c
deleted file mode 100644
index ed2c3ec07024..000000000000
--- a/drivers/oprofile/oprof.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/**
- * @file oprof.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/moduleparam.h>
-#include <linux/workqueue.h>
-#include <linux/time.h>
-#include <linux/mutex.h>
-
-#include "oprof.h"
-#include "event_buffer.h"
-#include "cpu_buffer.h"
-#include "buffer_sync.h"
-#include "oprofile_stats.h"
-
-struct oprofile_operations oprofile_ops;
-
-unsigned long oprofile_started;
-unsigned long oprofile_backtrace_depth;
-static unsigned long is_setup;
-static DEFINE_MUTEX(start_mutex);
-
-/* timer
-   0 - use performance monitoring hardware if available
-   1 - use the timer int mechanism regardless
- */
-static int timer = 0;
-
-int oprofile_setup(void)
-{
-	int err;
-
-	mutex_lock(&start_mutex);
-
-	if ((err = alloc_cpu_buffers()))
-		goto out;
-
-	if ((err = alloc_event_buffer()))
-		goto out1;
-
-	if (oprofile_ops.setup && (err = oprofile_ops.setup()))
-		goto out2;
-
-	/* Note even though this starts part of the
-	 * profiling overhead, it's necessary to prevent
-	 * us missing task deaths and eventually oopsing
-	 * when trying to process the event buffer.
-	 */
-	if (oprofile_ops.sync_start) {
-		int sync_ret = oprofile_ops.sync_start();
-		switch (sync_ret) {
-		case 0:
-			goto post_sync;
-		case 1:
-			goto do_generic;
-		case -1:
-			goto out3;
-		default:
-			goto out3;
-		}
-	}
-do_generic:
-	if ((err = sync_start()))
-		goto out3;
-
-post_sync:
-	is_setup = 1;
-	mutex_unlock(&start_mutex);
-	return 0;
-
-out3:
-	if (oprofile_ops.shutdown)
-		oprofile_ops.shutdown();
-out2:
-	free_event_buffer();
-out1:
-	free_cpu_buffers();
-out:
-	mutex_unlock(&start_mutex);
-	return err;
-}
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void switch_worker(struct work_struct *work);
-static DECLARE_DELAYED_WORK(switch_work, switch_worker);
-
-static void start_switch_worker(void)
-{
-	if (oprofile_ops.switch_events)
-		schedule_delayed_work(&switch_work, oprofile_time_slice);
-}
-
-static void stop_switch_worker(void)
-{
-	cancel_delayed_work_sync(&switch_work);
-}
-
-static void switch_worker(struct work_struct *work)
-{
-	if (oprofile_ops.switch_events())
-		return;
-
-	atomic_inc(&oprofile_stats.multiplex_counter);
-	start_switch_worker();
-}
-
-/* User inputs in ms, converts to jiffies */
-int oprofile_set_timeout(unsigned long val_msec)
-{
-	int err = 0;
-	unsigned long time_slice;
-
-	mutex_lock(&start_mutex);
-
-	if (oprofile_started) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	if (!oprofile_ops.switch_events) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	time_slice = msecs_to_jiffies(val_msec);
-	if (time_slice == MAX_JIFFY_OFFSET) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	oprofile_time_slice = time_slice;
-
-out:
-	mutex_unlock(&start_mutex);
-	return err;
-
-}
-
-#else
-
-static inline void start_switch_worker(void) { }
-static inline void stop_switch_worker(void) { }
-
-#endif
-
-/* Actually start profiling (echo 1>/dev/oprofile/enable) */
-int oprofile_start(void)
-{
-	int err = -EINVAL;
-
-	mutex_lock(&start_mutex);
-
-	if (!is_setup)
-		goto out;
-
-	err = 0;
-
-	if (oprofile_started)
-		goto out;
-
-	oprofile_reset_stats();
-
-	if ((err = oprofile_ops.start()))
-		goto out;
-
-	start_switch_worker();
-
-	oprofile_started = 1;
-out:
-	mutex_unlock(&start_mutex);
-	return err;
-}
-
-
-/* echo 0>/dev/oprofile/enable */
-void oprofile_stop(void)
-{
-	mutex_lock(&start_mutex);
-	if (!oprofile_started)
-		goto out;
-	oprofile_ops.stop();
-	oprofile_started = 0;
-
-	stop_switch_worker();
-
-	/* wake up the daemon to read what remains */
-	wake_up_buffer_waiter();
-out:
-	mutex_unlock(&start_mutex);
-}
-
-
-void oprofile_shutdown(void)
-{
-	mutex_lock(&start_mutex);
-	if (oprofile_ops.sync_stop) {
-		int sync_ret = oprofile_ops.sync_stop();
-		switch (sync_ret) {
-		case 0:
-			goto post_sync;
-		case 1:
-			goto do_generic;
-		default:
-			goto post_sync;
-		}
-	}
-do_generic:
-	sync_stop();
-post_sync:
-	if (oprofile_ops.shutdown)
-		oprofile_ops.shutdown();
-	is_setup = 0;
-	free_event_buffer();
-	free_cpu_buffers();
-	mutex_unlock(&start_mutex);
-}
-
-int oprofile_set_ulong(unsigned long *addr, unsigned long val)
-{
-	int err = -EBUSY;
-
-	mutex_lock(&start_mutex);
-	if (!oprofile_started) {
-		*addr = val;
-		err = 0;
-	}
-	mutex_unlock(&start_mutex);
-
-	return err;
-}
-
-static int timer_mode;
-
-static int __init oprofile_init(void)
-{
-	int err;
-
-	/* always init architecture to setup backtrace support */
-	timer_mode = 0;
-	err = oprofile_arch_init(&oprofile_ops);
-	if (!err) {
-		if (!timer && !oprofilefs_register())
-			return 0;
-		oprofile_arch_exit();
-	}
-
-	/* setup timer mode: */
-	timer_mode = 1;
-	/* no nmi timer mode if oprofile.timer is set */
-	if (timer || op_nmi_timer_init(&oprofile_ops)) {
-		err = oprofile_timer_init(&oprofile_ops);
-		if (err)
-			return err;
-	}
-
-	return oprofilefs_register();
-}
-
-
-static void __exit oprofile_exit(void)
-{
-	oprofilefs_unregister();
-	if (!timer_mode)
-		oprofile_arch_exit();
-}
-
-
-module_init(oprofile_init);
-module_exit(oprofile_exit);
-
-module_param_named(timer, timer, int, 0644);
-MODULE_PARM_DESC(timer, "force use of timer interrupt");
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("John Levon <levon@movementarian.org>");
-MODULE_DESCRIPTION("OProfile system profiler");
diff --git a/drivers/oprofile/oprof.h b/drivers/oprofile/oprof.h
deleted file mode 100644
index d5412060ab0f..000000000000
--- a/drivers/oprofile/oprof.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/**
- * @file oprof.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#ifndef OPROF_H
-#define OPROF_H
-
-int oprofile_setup(void);
-void oprofile_shutdown(void);
-
-int oprofilefs_register(void);
-void oprofilefs_unregister(void);
-
-int oprofile_start(void);
-void oprofile_stop(void);
-
-struct oprofile_operations;
-
-extern unsigned long oprofile_buffer_size;
-extern unsigned long oprofile_cpu_buffer_size;
-extern unsigned long oprofile_buffer_watershed;
-extern unsigned long oprofile_time_slice;
-
-extern struct oprofile_operations oprofile_ops;
-extern unsigned long oprofile_started;
-extern unsigned long oprofile_backtrace_depth;
-
-struct dentry;
-
-void oprofile_create_files(struct dentry *root);
-int oprofile_timer_init(struct oprofile_operations *ops);
-#ifdef CONFIG_OPROFILE_NMI_TIMER
-int op_nmi_timer_init(struct oprofile_operations *ops);
-#else
-static inline int op_nmi_timer_init(struct oprofile_operations *ops)
-{
-	return -ENODEV;
-}
-#endif
-
-
-int oprofile_set_ulong(unsigned long *addr, unsigned long val);
-int oprofile_set_timeout(unsigned long time);
-
-#endif /* OPROF_H */
diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c
deleted file mode 100644
index ee2cfce358b9..000000000000
--- a/drivers/oprofile/oprofile_files.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/**
- * @file oprofile_files.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/fs.h>
-#include <linux/oprofile.h>
-#include <linux/jiffies.h>
-
-#include "event_buffer.h"
-#include "oprofile_stats.h"
-#include "oprof.h"
-
-#define BUFFER_SIZE_DEFAULT		131072
-#define CPU_BUFFER_SIZE_DEFAULT		8192
-#define BUFFER_WATERSHED_DEFAULT	32768	/* FIXME: tune */
-#define TIME_SLICE_DEFAULT		1
-
-unsigned long oprofile_buffer_size;
-unsigned long oprofile_cpu_buffer_size;
-unsigned long oprofile_buffer_watershed;
-unsigned long oprofile_time_slice;
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static ssize_t timeout_read(struct file *file, char __user *buf,
-		size_t count, loff_t *offset)
-{
-	return oprofilefs_ulong_to_user(jiffies_to_msecs(oprofile_time_slice),
-					buf, count, offset);
-}
-
-
-static ssize_t timeout_write(struct file *file, char const __user *buf,
-		size_t count, loff_t *offset)
-{
-	unsigned long val;
-	int retval;
-
-	if (*offset)
-		return -EINVAL;
-
-	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval <= 0)
-		return retval;
-
-	retval = oprofile_set_timeout(val);
-
-	if (retval)
-		return retval;
-	return count;
-}
-
-
-static const struct file_operations timeout_fops = {
-	.read		= timeout_read,
-	.write		= timeout_write,
-	.llseek		= default_llseek,
-};
-
-#endif
-
-
-static ssize_t depth_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
-{
-	return oprofilefs_ulong_to_user(oprofile_backtrace_depth, buf, count,
-					offset);
-}
-
-
-static ssize_t depth_write(struct file *file, char const __user *buf, size_t count, loff_t *offset)
-{
-	unsigned long val;
-	int retval;
-
-	if (*offset)
-		return -EINVAL;
-
-	if (!oprofile_ops.backtrace)
-		return -EINVAL;
-
-	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval <= 0)
-		return retval;
-
-	retval = oprofile_set_ulong(&oprofile_backtrace_depth, val);
-	if (retval)
-		return retval;
-
-	return count;
-}
-
-
-static const struct file_operations depth_fops = {
-	.read		= depth_read,
-	.write		= depth_write,
-	.llseek		= default_llseek,
-};
-
-
-static ssize_t pointer_size_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
-{
-	return oprofilefs_ulong_to_user(sizeof(void *), buf, count, offset);
-}
-
-
-static const struct file_operations pointer_size_fops = {
-	.read		= pointer_size_read,
-	.llseek		= default_llseek,
-};
-
-
-static ssize_t cpu_type_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
-{
-	return oprofilefs_str_to_user(oprofile_ops.cpu_type, buf, count, offset);
-}
-
-
-static const struct file_operations cpu_type_fops = {
-	.read		= cpu_type_read,
-	.llseek		= default_llseek,
-};
-
-
-static ssize_t enable_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
-{
-	return oprofilefs_ulong_to_user(oprofile_started, buf, count, offset);
-}
-
-
-static ssize_t enable_write(struct file *file, char const __user *buf, size_t count, loff_t *offset)
-{
-	unsigned long val;
-	int retval;
-
-	if (*offset)
-		return -EINVAL;
-
-	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval <= 0)
-		return retval;
-
-	retval = 0;
-	if (val)
-		retval = oprofile_start();
-	else
-		oprofile_stop();
-
-	if (retval)
-		return retval;
-	return count;
-}
-
-
-static const struct file_operations enable_fops = {
-	.read		= enable_read,
-	.write		= enable_write,
-	.llseek		= default_llseek,
-};
-
-
-static ssize_t dump_write(struct file *file, char const __user *buf, size_t count, loff_t *offset)
-{
-	wake_up_buffer_waiter();
-	return count;
-}
-
-
-static const struct file_operations dump_fops = {
-	.write		= dump_write,
-	.llseek		= noop_llseek,
-};
-
-void oprofile_create_files(struct dentry *root)
-{
-	/* reinitialize default values */
-	oprofile_buffer_size =		BUFFER_SIZE_DEFAULT;
-	oprofile_cpu_buffer_size =	CPU_BUFFER_SIZE_DEFAULT;
-	oprofile_buffer_watershed =	BUFFER_WATERSHED_DEFAULT;
-	oprofile_time_slice =		msecs_to_jiffies(TIME_SLICE_DEFAULT);
-
-	oprofilefs_create_file(root, "enable", &enable_fops);
-	oprofilefs_create_file_perm(root, "dump", &dump_fops, 0666);
-	oprofilefs_create_file(root, "buffer", &event_buffer_fops);
-	oprofilefs_create_ulong(root, "buffer_size", &oprofile_buffer_size);
-	oprofilefs_create_ulong(root, "buffer_watershed", &oprofile_buffer_watershed);
-	oprofilefs_create_ulong(root, "cpu_buffer_size", &oprofile_cpu_buffer_size);
-	oprofilefs_create_file(root, "cpu_type", &cpu_type_fops);
-	oprofilefs_create_file(root, "backtrace_depth", &depth_fops);
-	oprofilefs_create_file(root, "pointer_size", &pointer_size_fops);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	oprofilefs_create_file(root, "time_slice", &timeout_fops);
-#endif
-	oprofile_create_stats_files(root);
-	if (oprofile_ops.create_files)
-		oprofile_ops.create_files(root);
-}
diff --git a/drivers/oprofile/oprofile_perf.c b/drivers/oprofile/oprofile_perf.c
deleted file mode 100644
index 98a63a5f8763..000000000000
--- a/drivers/oprofile/oprofile_perf.c
+++ /dev/null
@@ -1,328 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2010 ARM Ltd.
- * Copyright 2012 Advanced Micro Devices, Inc., Robert Richter
- *
- * Perf-events backend for OProfile.
- */
-#include <linux/perf_event.h>
-#include <linux/platform_device.h>
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-
-/*
- * Per performance monitor configuration as set via oprofilefs.
- */
-struct op_counter_config {
-	unsigned long count;
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long unit_mask;
-	unsigned long kernel;
-	unsigned long user;
-	struct perf_event_attr attr;
-};
-
-static int oprofile_perf_enabled;
-static DEFINE_MUTEX(oprofile_perf_mutex);
-
-static struct op_counter_config *counter_config;
-static DEFINE_PER_CPU(struct perf_event **, perf_events);
-static int num_counters;
-
-/*
- * Overflow callback for oprofile.
- */
-static void op_overflow_handler(struct perf_event *event,
-			struct perf_sample_data *data, struct pt_regs *regs)
-{
-	int id;
-	u32 cpu = smp_processor_id();
-
-	for (id = 0; id < num_counters; ++id)
-		if (per_cpu(perf_events, cpu)[id] == event)
-			break;
-
-	if (id != num_counters)
-		oprofile_add_sample(regs, id);
-	else
-		pr_warn("oprofile: ignoring spurious overflow on cpu %u\n",
-			cpu);
-}
-
-/*
- * Called by oprofile_perf_setup to create perf attributes to mirror the oprofile
- * settings in counter_config. Attributes are created as `pinned' events and
- * so are permanently scheduled on the PMU.
- */
-static void op_perf_setup(void)
-{
-	int i;
-	u32 size = sizeof(struct perf_event_attr);
-	struct perf_event_attr *attr;
-
-	for (i = 0; i < num_counters; ++i) {
-		attr = &counter_config[i].attr;
-		memset(attr, 0, size);
-		attr->type		= PERF_TYPE_RAW;
-		attr->size		= size;
-		attr->config		= counter_config[i].event;
-		attr->sample_period	= counter_config[i].count;
-		attr->pinned		= 1;
-	}
-}
-
-static int op_create_counter(int cpu, int event)
-{
-	struct perf_event *pevent;
-
-	if (!counter_config[event].enabled || per_cpu(perf_events, cpu)[event])
-		return 0;
-
-	pevent = perf_event_create_kernel_counter(&counter_config[event].attr,
-						  cpu, NULL,
-						  op_overflow_handler, NULL);
-
-	if (IS_ERR(pevent))
-		return PTR_ERR(pevent);
-
-	if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
-		perf_event_release_kernel(pevent);
-		pr_warn("oprofile: failed to enable event %d on CPU %d\n",
-			event, cpu);
-		return -EBUSY;
-	}
-
-	per_cpu(perf_events, cpu)[event] = pevent;
-
-	return 0;
-}
-
-static void op_destroy_counter(int cpu, int event)
-{
-	struct perf_event *pevent = per_cpu(perf_events, cpu)[event];
-
-	if (pevent) {
-		perf_event_release_kernel(pevent);
-		per_cpu(perf_events, cpu)[event] = NULL;
-	}
-}
-
-/*
- * Called by oprofile_perf_start to create active perf events based on the
- * perviously configured attributes.
- */
-static int op_perf_start(void)
-{
-	int cpu, event, ret = 0;
-
-	for_each_online_cpu(cpu) {
-		for (event = 0; event < num_counters; ++event) {
-			ret = op_create_counter(cpu, event);
-			if (ret)
-				return ret;
-		}
-	}
-
-	return ret;
-}
-
-/*
- * Called by oprofile_perf_stop at the end of a profiling run.
- */
-static void op_perf_stop(void)
-{
-	int cpu, event;
-
-	for_each_online_cpu(cpu)
-		for (event = 0; event < num_counters; ++event)
-			op_destroy_counter(cpu, event);
-}
-
-static int oprofile_perf_create_files(struct dentry *root)
-{
-	unsigned int i;
-
-	for (i = 0; i < num_counters; i++) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-		oprofilefs_create_ulong(dir, "enabled", &counter_config[i].enabled);
-		oprofilefs_create_ulong(dir, "event", &counter_config[i].event);
-		oprofilefs_create_ulong(dir, "count", &counter_config[i].count);
-		oprofilefs_create_ulong(dir, "unit_mask", &counter_config[i].unit_mask);
-		oprofilefs_create_ulong(dir, "kernel", &counter_config[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &counter_config[i].user);
-	}
-
-	return 0;
-}
-
-static int oprofile_perf_setup(void)
-{
-	raw_spin_lock(&oprofilefs_lock);
-	op_perf_setup();
-	raw_spin_unlock(&oprofilefs_lock);
-	return 0;
-}
-
-static int oprofile_perf_start(void)
-{
-	int ret = -EBUSY;
-
-	mutex_lock(&oprofile_perf_mutex);
-	if (!oprofile_perf_enabled) {
-		ret = 0;
-		op_perf_start();
-		oprofile_perf_enabled = 1;
-	}
-	mutex_unlock(&oprofile_perf_mutex);
-	return ret;
-}
-
-static void oprofile_perf_stop(void)
-{
-	mutex_lock(&oprofile_perf_mutex);
-	if (oprofile_perf_enabled)
-		op_perf_stop();
-	oprofile_perf_enabled = 0;
-	mutex_unlock(&oprofile_perf_mutex);
-}
-
-#ifdef CONFIG_PM
-
-static int oprofile_perf_suspend(struct platform_device *dev, pm_message_t state)
-{
-	mutex_lock(&oprofile_perf_mutex);
-	if (oprofile_perf_enabled)
-		op_perf_stop();
-	mutex_unlock(&oprofile_perf_mutex);
-	return 0;
-}
-
-static int oprofile_perf_resume(struct platform_device *dev)
-{
-	mutex_lock(&oprofile_perf_mutex);
-	if (oprofile_perf_enabled && op_perf_start())
-		oprofile_perf_enabled = 0;
-	mutex_unlock(&oprofile_perf_mutex);
-	return 0;
-}
-
-static struct platform_driver oprofile_driver = {
-	.driver		= {
-		.name		= "oprofile-perf",
-	},
-	.resume		= oprofile_perf_resume,
-	.suspend	= oprofile_perf_suspend,
-};
-
-static struct platform_device *oprofile_pdev;
-
-static int __init init_driverfs(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&oprofile_driver);
-	if (ret)
-		return ret;
-
-	oprofile_pdev =	platform_device_register_simple(
-				oprofile_driver.driver.name, 0, NULL, 0);
-	if (IS_ERR(oprofile_pdev)) {
-		ret = PTR_ERR(oprofile_pdev);
-		platform_driver_unregister(&oprofile_driver);
-	}
-
-	return ret;
-}
-
-static void exit_driverfs(void)
-{
-	platform_device_unregister(oprofile_pdev);
-	platform_driver_unregister(&oprofile_driver);
-}
-
-#else
-
-static inline int  init_driverfs(void) { return 0; }
-static inline void exit_driverfs(void) { }
-
-#endif /* CONFIG_PM */
-
-void oprofile_perf_exit(void)
-{
-	int cpu, id;
-	struct perf_event *event;
-
-	for_each_possible_cpu(cpu) {
-		for (id = 0; id < num_counters; ++id) {
-			event = per_cpu(perf_events, cpu)[id];
-			if (event)
-				perf_event_release_kernel(event);
-		}
-
-		kfree(per_cpu(perf_events, cpu));
-	}
-
-	kfree(counter_config);
-	exit_driverfs();
-}
-
-int __init oprofile_perf_init(struct oprofile_operations *ops)
-{
-	int cpu, ret = 0;
-
-	ret = init_driverfs();
-	if (ret)
-		return ret;
-
-	num_counters = perf_num_counters();
-	if (num_counters <= 0) {
-		pr_info("oprofile: no performance counters\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	counter_config = kcalloc(num_counters,
-			sizeof(struct op_counter_config), GFP_KERNEL);
-
-	if (!counter_config) {
-		pr_info("oprofile: failed to allocate %d "
-				"counters\n", num_counters);
-		ret = -ENOMEM;
-		num_counters = 0;
-		goto out;
-	}
-
-	for_each_possible_cpu(cpu) {
-		per_cpu(perf_events, cpu) = kcalloc(num_counters,
-				sizeof(struct perf_event *), GFP_KERNEL);
-		if (!per_cpu(perf_events, cpu)) {
-			pr_info("oprofile: failed to allocate %d perf events "
-					"for cpu %d\n", num_counters, cpu);
-			ret = -ENOMEM;
-			goto out;
-		}
-	}
-
-	ops->create_files	= oprofile_perf_create_files;
-	ops->setup		= oprofile_perf_setup;
-	ops->start		= oprofile_perf_start;
-	ops->stop		= oprofile_perf_stop;
-	ops->shutdown		= oprofile_perf_stop;
-	ops->cpu_type		= op_name_from_perf_id();
-
-	if (!ops->cpu_type)
-		ret = -ENODEV;
-	else
-		pr_info("oprofile: using %s\n", ops->cpu_type);
-
-out:
-	if (ret)
-		oprofile_perf_exit();
-
-	return ret;
-}
diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c
deleted file mode 100644
index 59659cea4582..000000000000
--- a/drivers/oprofile/oprofile_stats.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/**
- * @file oprofile_stats.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/threads.h>
-
-#include "oprofile_stats.h"
-#include "cpu_buffer.h"
-
-struct oprofile_stat_struct oprofile_stats;
-
-void oprofile_reset_stats(void)
-{
-	struct oprofile_cpu_buffer *cpu_buf;
-	int i;
-
-	for_each_possible_cpu(i) {
-		cpu_buf = &per_cpu(op_cpu_buffer, i);
-		cpu_buf->sample_received = 0;
-		cpu_buf->sample_lost_overflow = 0;
-		cpu_buf->backtrace_aborted = 0;
-		cpu_buf->sample_invalid_eip = 0;
-	}
-
-	atomic_set(&oprofile_stats.sample_lost_no_mm, 0);
-	atomic_set(&oprofile_stats.sample_lost_no_mapping, 0);
-	atomic_set(&oprofile_stats.event_lost_overflow, 0);
-	atomic_set(&oprofile_stats.bt_lost_no_mapping, 0);
-	atomic_set(&oprofile_stats.multiplex_counter, 0);
-}
-
-
-void oprofile_create_stats_files(struct dentry *root)
-{
-	struct oprofile_cpu_buffer *cpu_buf;
-	struct dentry *cpudir;
-	struct dentry *dir;
-	char buf[10];
-	int i;
-
-	dir = oprofilefs_mkdir(root, "stats");
-	if (!dir)
-		return;
-
-	for_each_possible_cpu(i) {
-		cpu_buf = &per_cpu(op_cpu_buffer, i);
-		snprintf(buf, 10, "cpu%d", i);
-		cpudir = oprofilefs_mkdir(dir, buf);
-
-		/* Strictly speaking access to these ulongs is racy,
-		 * but we can't simply lock them, and they are
-		 * informational only.
-		 */
-		oprofilefs_create_ro_ulong(cpudir, "sample_received",
-			&cpu_buf->sample_received);
-		oprofilefs_create_ro_ulong(cpudir, "sample_lost_overflow",
-			&cpu_buf->sample_lost_overflow);
-		oprofilefs_create_ro_ulong(cpudir, "backtrace_aborted",
-			&cpu_buf->backtrace_aborted);
-		oprofilefs_create_ro_ulong(cpudir, "sample_invalid_eip",
-			&cpu_buf->sample_invalid_eip);
-	}
-
-	oprofilefs_create_ro_atomic(dir, "sample_lost_no_mm",
-		&oprofile_stats.sample_lost_no_mm);
-	oprofilefs_create_ro_atomic(dir, "sample_lost_no_mapping",
-		&oprofile_stats.sample_lost_no_mapping);
-	oprofilefs_create_ro_atomic(dir, "event_lost_overflow",
-		&oprofile_stats.event_lost_overflow);
-	oprofilefs_create_ro_atomic(dir, "bt_lost_no_mapping",
-		&oprofile_stats.bt_lost_no_mapping);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	oprofilefs_create_ro_atomic(dir, "multiplex_counter",
-		&oprofile_stats.multiplex_counter);
-#endif
-}
diff --git a/drivers/oprofile/oprofile_stats.h b/drivers/oprofile/oprofile_stats.h
deleted file mode 100644
index 1fc622bd1834..000000000000
--- a/drivers/oprofile/oprofile_stats.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/**
- * @file oprofile_stats.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- */
-
-#ifndef OPROFILE_STATS_H
-#define OPROFILE_STATS_H
-
-#include <linux/atomic.h>
-
-struct oprofile_stat_struct {
-	atomic_t sample_lost_no_mm;
-	atomic_t sample_lost_no_mapping;
-	atomic_t bt_lost_no_mapping;
-	atomic_t event_lost_overflow;
-	atomic_t multiplex_counter;
-};
-
-extern struct oprofile_stat_struct oprofile_stats;
-
-/* reset all stats to zero */
-void oprofile_reset_stats(void);
-
-struct dentry;
-
-/* create the stats/ dir */
-void oprofile_create_stats_files(struct dentry *root);
-
-#endif /* OPROFILE_STATS_H */
diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c
deleted file mode 100644
index 0875f2f122b3..000000000000
--- a/drivers/oprofile/oprofilefs.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/**
- * @file oprofilefs.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- *
- * A simple filesystem for configuration and
- * access of oprofile.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/oprofile.h>
-#include <linux/fs.h>
-#include <linux/fs_context.h>
-#include <linux/pagemap.h>
-#include <linux/uaccess.h>
-
-#include "oprof.h"
-
-#define OPROFILEFS_MAGIC 0x6f70726f
-
-DEFINE_RAW_SPINLOCK(oprofilefs_lock);
-
-static struct inode *oprofilefs_get_inode(struct super_block *sb, int mode)
-{
-	struct inode *inode = new_inode(sb);
-
-	if (inode) {
-		inode->i_ino = get_next_ino();
-		inode->i_mode = mode;
-		inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
-	}
-	return inode;
-}
-
-
-static const struct super_operations s_ops = {
-	.statfs		= simple_statfs,
-	.drop_inode 	= generic_delete_inode,
-};
-
-
-ssize_t oprofilefs_str_to_user(char const *str, char __user *buf, size_t count, loff_t *offset)
-{
-	return simple_read_from_buffer(buf, count, offset, str, strlen(str));
-}
-
-
-#define TMPBUFSIZE 50
-
-ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user *buf, size_t count, loff_t *offset)
-{
-	char tmpbuf[TMPBUFSIZE];
-	size_t maxlen = snprintf(tmpbuf, TMPBUFSIZE, "%lu\n", val);
-	if (maxlen > TMPBUFSIZE)
-		maxlen = TMPBUFSIZE;
-	return simple_read_from_buffer(buf, count, offset, tmpbuf, maxlen);
-}
-
-
-/*
- * Note: If oprofilefs_ulong_from_user() returns 0, then *val remains
- * unchanged and might be uninitialized. This follows write syscall
- * implementation when count is zero: "If count is zero ... [and if]
- * no errors are detected, 0 will be returned without causing any
- * other effect." (man 2 write)
- */
-int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_t count)
-{
-	char tmpbuf[TMPBUFSIZE];
-	unsigned long flags;
-
-	if (!count)
-		return 0;
-
-	if (count > TMPBUFSIZE - 1)
-		return -EINVAL;
-
-	memset(tmpbuf, 0x0, TMPBUFSIZE);
-
-	if (copy_from_user(tmpbuf, buf, count))
-		return -EFAULT;
-
-	raw_spin_lock_irqsave(&oprofilefs_lock, flags);
-	*val = simple_strtoul(tmpbuf, NULL, 0);
-	raw_spin_unlock_irqrestore(&oprofilefs_lock, flags);
-	return count;
-}
-
-
-static ssize_t ulong_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset)
-{
-	unsigned long *val = file->private_data;
-	return oprofilefs_ulong_to_user(*val, buf, count, offset);
-}
-
-
-static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_t count, loff_t *offset)
-{
-	unsigned long value;
-	int retval;
-
-	if (*offset)
-		return -EINVAL;
-
-	retval = oprofilefs_ulong_from_user(&value, buf, count);
-	if (retval <= 0)
-		return retval;
-
-	retval = oprofile_set_ulong(file->private_data, value);
-	if (retval)
-		return retval;
-
-	return count;
-}
-
-
-static const struct file_operations ulong_fops = {
-	.read		= ulong_read_file,
-	.write		= ulong_write_file,
-	.open		= simple_open,
-	.llseek		= default_llseek,
-};
-
-
-static const struct file_operations ulong_ro_fops = {
-	.read		= ulong_read_file,
-	.open		= simple_open,
-	.llseek		= default_llseek,
-};
-
-
-static int __oprofilefs_create_file(struct dentry *root, char const *name,
-	const struct file_operations *fops, int perm, void *priv)
-{
-	struct dentry *dentry;
-	struct inode *inode;
-
-	if (!root)
-		return -ENOMEM;
-
-	inode_lock(d_inode(root));
-	dentry = d_alloc_name(root, name);
-	if (!dentry) {
-		inode_unlock(d_inode(root));
-		return -ENOMEM;
-	}
-	inode = oprofilefs_get_inode(root->d_sb, S_IFREG | perm);
-	if (!inode) {
-		dput(dentry);
-		inode_unlock(d_inode(root));
-		return -ENOMEM;
-	}
-	inode->i_fop = fops;
-	inode->i_private = priv;
-	d_add(dentry, inode);
-	inode_unlock(d_inode(root));
-	return 0;
-}
-
-
-int oprofilefs_create_ulong(struct dentry *root,
-	char const *name, unsigned long *val)
-{
-	return __oprofilefs_create_file(root, name,
-					&ulong_fops, 0644, val);
-}
-
-
-int oprofilefs_create_ro_ulong(struct dentry *root,
-	char const *name, unsigned long *val)
-{
-	return __oprofilefs_create_file(root, name,
-					&ulong_ro_fops, 0444, val);
-}
-
-
-static ssize_t atomic_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset)
-{
-	atomic_t *val = file->private_data;
-	return oprofilefs_ulong_to_user(atomic_read(val), buf, count, offset);
-}
-
-
-static const struct file_operations atomic_ro_fops = {
-	.read		= atomic_read_file,
-	.open		= simple_open,
-	.llseek		= default_llseek,
-};
-
-
-int oprofilefs_create_ro_atomic(struct dentry *root,
-	char const *name, atomic_t *val)
-{
-	return __oprofilefs_create_file(root, name,
-					&atomic_ro_fops, 0444, val);
-}
-
-
-int oprofilefs_create_file(struct dentry *root,
-	char const *name, const struct file_operations *fops)
-{
-	return __oprofilefs_create_file(root, name, fops, 0644, NULL);
-}
-
-
-int oprofilefs_create_file_perm(struct dentry *root,
-	char const *name, const struct file_operations *fops, int perm)
-{
-	return __oprofilefs_create_file(root, name, fops, perm, NULL);
-}
-
-
-struct dentry *oprofilefs_mkdir(struct dentry *parent, char const *name)
-{
-	struct dentry *dentry;
-	struct inode *inode;
-
-	inode_lock(d_inode(parent));
-	dentry = d_alloc_name(parent, name);
-	if (!dentry) {
-		inode_unlock(d_inode(parent));
-		return NULL;
-	}
-	inode = oprofilefs_get_inode(parent->d_sb, S_IFDIR | 0755);
-	if (!inode) {
-		dput(dentry);
-		inode_unlock(d_inode(parent));
-		return NULL;
-	}
-	inode->i_op = &simple_dir_inode_operations;
-	inode->i_fop = &simple_dir_operations;
-	d_add(dentry, inode);
-	inode_unlock(d_inode(parent));
-	return dentry;
-}
-
-
-static int oprofilefs_fill_super(struct super_block *sb, struct fs_context *fc)
-{
-	struct inode *root_inode;
-
-	sb->s_blocksize = PAGE_SIZE;
-	sb->s_blocksize_bits = PAGE_SHIFT;
-	sb->s_magic = OPROFILEFS_MAGIC;
-	sb->s_op = &s_ops;
-	sb->s_time_gran = 1;
-
-	root_inode = oprofilefs_get_inode(sb, S_IFDIR | 0755);
-	if (!root_inode)
-		return -ENOMEM;
-	root_inode->i_op = &simple_dir_inode_operations;
-	root_inode->i_fop = &simple_dir_operations;
-	sb->s_root = d_make_root(root_inode);
-	if (!sb->s_root)
-		return -ENOMEM;
-
-	oprofile_create_files(sb->s_root);
-
-	// FIXME: verify kill_litter_super removes our dentries
-	return 0;
-}
-
-static int oprofilefs_get_tree(struct fs_context *fc)
-{
-	return get_tree_single(fc, oprofilefs_fill_super);
-}
-
-static const struct fs_context_operations oprofilefs_context_ops = {
-	.get_tree	= oprofilefs_get_tree,
-};
-
-static int oprofilefs_init_fs_context(struct fs_context *fc)
-{
-	fc->ops = &oprofilefs_context_ops;
-	return 0;
-}
-
-static struct file_system_type oprofilefs_type = {
-	.owner		= THIS_MODULE,
-	.name		= "oprofilefs",
-	.init_fs_context = oprofilefs_init_fs_context,
-	.kill_sb	= kill_litter_super,
-};
-MODULE_ALIAS_FS("oprofilefs");
-
-
-int __init oprofilefs_register(void)
-{
-	return register_filesystem(&oprofilefs_type);
-}
-
-
-void __exit oprofilefs_unregister(void)
-{
-	unregister_filesystem(&oprofilefs_type);
-}
diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c
deleted file mode 100644
index 2498a6cd7c24..000000000000
--- a/drivers/oprofile/timer_int.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/**
- * @file timer_int.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/notifier.h>
-#include <linux/smp.h>
-#include <linux/oprofile.h>
-#include <linux/profile.h>
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/hrtimer.h>
-#include <asm/irq_regs.h>
-#include <asm/ptrace.h>
-
-#include "oprof.h"
-
-static DEFINE_PER_CPU(struct hrtimer, oprofile_hrtimer);
-static int ctr_running;
-
-static enum hrtimer_restart oprofile_hrtimer_notify(struct hrtimer *hrtimer)
-{
-	oprofile_add_sample(get_irq_regs(), 0);
-	hrtimer_forward_now(hrtimer, ns_to_ktime(TICK_NSEC));
-	return HRTIMER_RESTART;
-}
-
-static void __oprofile_hrtimer_start(void *unused)
-{
-	struct hrtimer *hrtimer = this_cpu_ptr(&oprofile_hrtimer);
-
-	if (!ctr_running)
-		return;
-
-	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	hrtimer->function = oprofile_hrtimer_notify;
-
-	hrtimer_start(hrtimer, ns_to_ktime(TICK_NSEC),
-		      HRTIMER_MODE_REL_PINNED);
-}
-
-static int oprofile_hrtimer_start(void)
-{
-	get_online_cpus();
-	ctr_running = 1;
-	on_each_cpu(__oprofile_hrtimer_start, NULL, 1);
-	put_online_cpus();
-	return 0;
-}
-
-static void __oprofile_hrtimer_stop(int cpu)
-{
-	struct hrtimer *hrtimer = &per_cpu(oprofile_hrtimer, cpu);
-
-	if (!ctr_running)
-		return;
-
-	hrtimer_cancel(hrtimer);
-}
-
-static void oprofile_hrtimer_stop(void)
-{
-	int cpu;
-
-	get_online_cpus();
-	for_each_online_cpu(cpu)
-		__oprofile_hrtimer_stop(cpu);
-	ctr_running = 0;
-	put_online_cpus();
-}
-
-static int oprofile_timer_online(unsigned int cpu)
-{
-	local_irq_disable();
-	__oprofile_hrtimer_start(NULL);
-	local_irq_enable();
-	return 0;
-}
-
-static int oprofile_timer_prep_down(unsigned int cpu)
-{
-	__oprofile_hrtimer_stop(cpu);
-	return 0;
-}
-
-static enum cpuhp_state hp_online;
-
-static int oprofile_hrtimer_setup(void)
-{
-	int ret;
-
-	ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
-					"oprofile/timer:online",
-					oprofile_timer_online,
-					oprofile_timer_prep_down);
-	if (ret < 0)
-		return ret;
-	hp_online = ret;
-	return 0;
-}
-
-static void oprofile_hrtimer_shutdown(void)
-{
-	cpuhp_remove_state_nocalls(hp_online);
-}
-
-int oprofile_timer_init(struct oprofile_operations *ops)
-{
-	ops->create_files	= NULL;
-	ops->setup		= oprofile_hrtimer_setup;
-	ops->shutdown		= oprofile_hrtimer_shutdown;
-	ops->start		= oprofile_hrtimer_start;
-	ops->stop		= oprofile_hrtimer_stop;
-	ops->cpu_type		= "timer";
-	printk(KERN_INFO "oprofile: using timer interrupt.\n");
-	return 0;
-}
diff --git a/fs/Makefile b/fs/Makefile
index 999d1a23f036..3215fe205256 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -64,7 +64,6 @@ obj-$(CONFIG_SYSFS)		+= sysfs/
 obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
 obj-y				+= devpts/
 
-obj-$(CONFIG_PROFILING)		+= dcookies.o
 obj-$(CONFIG_DLM)		+= dlm/
  
 # Do not add any filesystems before this line
diff --git a/fs/dcookies.c b/fs/dcookies.c
deleted file mode 100644
index 6eeb61100a09..000000000000
--- a/fs/dcookies.c
+++ /dev/null
@@ -1,356 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * dcookies.c
- *
- * Copyright 2002 John Levon <levon@movementarian.org>
- *
- * Persistent cookie-path mappings. These are used by
- * profilers to convert a per-task EIP value into something
- * non-transitory that can be processed at a later date.
- * This is done by locking the dentry/vfsmnt pair in the
- * kernel until released by the tasks needing the persistent
- * objects. The tag is simply an unsigned long that refers
- * to the pair and can be looked up from userspace.
- */
-
-#include <linux/syscalls.h>
-#include <linux/export.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/mount.h>
-#include <linux/capability.h>
-#include <linux/dcache.h>
-#include <linux/mm.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/dcookies.h>
-#include <linux/mutex.h>
-#include <linux/path.h>
-#include <linux/compat.h>
-#include <linux/uaccess.h>
-
-/* The dcookies are allocated from a kmem_cache and
- * hashed onto a small number of lists. None of the
- * code here is particularly performance critical
- */
-struct dcookie_struct {
-	struct path path;
-	struct list_head hash_list;
-};
-
-static LIST_HEAD(dcookie_users);
-static DEFINE_MUTEX(dcookie_mutex);
-static struct kmem_cache *dcookie_cache __read_mostly;
-static struct list_head *dcookie_hashtable __read_mostly;
-static size_t hash_size __read_mostly;
-
-static inline int is_live(void)
-{
-	return !(list_empty(&dcookie_users));
-}
-
-
-/* The dentry is locked, its address will do for the cookie */
-static inline unsigned long dcookie_value(struct dcookie_struct * dcs)
-{
-	return (unsigned long)dcs->path.dentry;
-}
-
-
-static size_t dcookie_hash(unsigned long dcookie)
-{
-	return (dcookie >> L1_CACHE_SHIFT) & (hash_size - 1);
-}
-
-
-static struct dcookie_struct * find_dcookie(unsigned long dcookie)
-{
-	struct dcookie_struct *found = NULL;
-	struct dcookie_struct * dcs;
-	struct list_head * pos;
-	struct list_head * list;
-
-	list = dcookie_hashtable + dcookie_hash(dcookie);
-
-	list_for_each(pos, list) {
-		dcs = list_entry(pos, struct dcookie_struct, hash_list);
-		if (dcookie_value(dcs) == dcookie) {
-			found = dcs;
-			break;
-		}
-	}
-
-	return found;
-}
-
-
-static void hash_dcookie(struct dcookie_struct * dcs)
-{
-	struct list_head * list = dcookie_hashtable + dcookie_hash(dcookie_value(dcs));
-	list_add(&dcs->hash_list, list);
-}
-
-
-static struct dcookie_struct *alloc_dcookie(const struct path *path)
-{
-	struct dcookie_struct *dcs = kmem_cache_alloc(dcookie_cache,
-							GFP_KERNEL);
-	struct dentry *d;
-	if (!dcs)
-		return NULL;
-
-	d = path->dentry;
-	spin_lock(&d->d_lock);
-	d->d_flags |= DCACHE_COOKIE;
-	spin_unlock(&d->d_lock);
-
-	dcs->path = *path;
-	path_get(path);
-	hash_dcookie(dcs);
-	return dcs;
-}
-
-
-/* This is the main kernel-side routine that retrieves the cookie
- * value for a dentry/vfsmnt pair.
- */
-int get_dcookie(const struct path *path, unsigned long *cookie)
-{
-	int err = 0;
-	struct dcookie_struct * dcs;
-
-	mutex_lock(&dcookie_mutex);
-
-	if (!is_live()) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	if (path->dentry->d_flags & DCACHE_COOKIE) {
-		dcs = find_dcookie((unsigned long)path->dentry);
-	} else {
-		dcs = alloc_dcookie(path);
-		if (!dcs) {
-			err = -ENOMEM;
-			goto out;
-		}
-	}
-
-	*cookie = dcookie_value(dcs);
-
-out:
-	mutex_unlock(&dcookie_mutex);
-	return err;
-}
-
-
-/* And here is where the userspace process can look up the cookie value
- * to retrieve the path.
- */
-static int do_lookup_dcookie(u64 cookie64, char __user *buf, size_t len)
-{
-	unsigned long cookie = (unsigned long)cookie64;
-	int err = -EINVAL;
-	char * kbuf;
-	char * path;
-	size_t pathlen;
-	struct dcookie_struct * dcs;
-
-	/* we could leak path information to users
-	 * without dir read permission without this
-	 */
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	mutex_lock(&dcookie_mutex);
-
-	if (!is_live()) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	if (!(dcs = find_dcookie(cookie)))
-		goto out;
-
-	err = -ENOMEM;
-	kbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!kbuf)
-		goto out;
-
-	/* FIXME: (deleted) ? */
-	path = d_path(&dcs->path, kbuf, PAGE_SIZE);
-
-	mutex_unlock(&dcookie_mutex);
-
-	if (IS_ERR(path)) {
-		err = PTR_ERR(path);
-		goto out_free;
-	}
-
-	err = -ERANGE;
- 
-	pathlen = kbuf + PAGE_SIZE - path;
-	if (pathlen <= len) {
-		err = pathlen;
-		if (copy_to_user(buf, path, pathlen))
-			err = -EFAULT;
-	}
-
-out_free:
-	kfree(kbuf);
-	return err;
-out:
-	mutex_unlock(&dcookie_mutex);
-	return err;
-}
-
-SYSCALL_DEFINE3(lookup_dcookie, u64, cookie64, char __user *, buf, size_t, len)
-{
-	return do_lookup_dcookie(cookie64, buf, len);
-}
-
-#ifdef CONFIG_COMPAT
-COMPAT_SYSCALL_DEFINE4(lookup_dcookie, u32, w0, u32, w1, char __user *, buf, compat_size_t, len)
-{
-#ifdef __BIG_ENDIAN
-	return do_lookup_dcookie(((u64)w0 << 32) | w1, buf, len);
-#else
-	return do_lookup_dcookie(((u64)w1 << 32) | w0, buf, len);
-#endif
-}
-#endif
-
-static int dcookie_init(void)
-{
-	struct list_head * d;
-	unsigned int i, hash_bits;
-	int err = -ENOMEM;
-
-	dcookie_cache = kmem_cache_create("dcookie_cache",
-		sizeof(struct dcookie_struct),
-		0, 0, NULL);
-
-	if (!dcookie_cache)
-		goto out;
-
-	dcookie_hashtable = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!dcookie_hashtable)
-		goto out_kmem;
-
-	err = 0;
-
-	/*
-	 * Find the power-of-two list-heads that can fit into the allocation..
-	 * We don't guarantee that "sizeof(struct list_head)" is necessarily
-	 * a power-of-two.
-	 */
-	hash_size = PAGE_SIZE / sizeof(struct list_head);
-	hash_bits = 0;
-	do {
-		hash_bits++;
-	} while ((hash_size >> hash_bits) != 0);
-	hash_bits--;
-
-	/*
-	 * Re-calculate the actual number of entries and the mask
-	 * from the number of bits we can fit.
-	 */
-	hash_size = 1UL << hash_bits;
-
-	/* And initialize the newly allocated array */
-	d = dcookie_hashtable;
-	i = hash_size;
-	do {
-		INIT_LIST_HEAD(d);
-		d++;
-		i--;
-	} while (i);
-
-out:
-	return err;
-out_kmem:
-	kmem_cache_destroy(dcookie_cache);
-	goto out;
-}
-
-
-static void free_dcookie(struct dcookie_struct * dcs)
-{
-	struct dentry *d = dcs->path.dentry;
-
-	spin_lock(&d->d_lock);
-	d->d_flags &= ~DCACHE_COOKIE;
-	spin_unlock(&d->d_lock);
-
-	path_put(&dcs->path);
-	kmem_cache_free(dcookie_cache, dcs);
-}
-
-
-static void dcookie_exit(void)
-{
-	struct list_head * list;
-	struct list_head * pos;
-	struct list_head * pos2;
-	struct dcookie_struct * dcs;
-	size_t i;
-
-	for (i = 0; i < hash_size; ++i) {
-		list = dcookie_hashtable + i;
-		list_for_each_safe(pos, pos2, list) {
-			dcs = list_entry(pos, struct dcookie_struct, hash_list);
-			list_del(&dcs->hash_list);
-			free_dcookie(dcs);
-		}
-	}
-
-	kfree(dcookie_hashtable);
-	kmem_cache_destroy(dcookie_cache);
-}
-
-
-struct dcookie_user {
-	struct list_head next;
-};
- 
-struct dcookie_user * dcookie_register(void)
-{
-	struct dcookie_user * user;
-
-	mutex_lock(&dcookie_mutex);
-
-	user = kmalloc(sizeof(struct dcookie_user), GFP_KERNEL);
-	if (!user)
-		goto out;
-
-	if (!is_live() && dcookie_init())
-		goto out_free;
-
-	list_add(&user->next, &dcookie_users);
-
-out:
-	mutex_unlock(&dcookie_mutex);
-	return user;
-out_free:
-	kfree(user);
-	user = NULL;
-	goto out;
-}
-
-
-void dcookie_unregister(struct dcookie_user * user)
-{
-	mutex_lock(&dcookie_mutex);
-
-	list_del(&user->next);
-	kfree(user);
-
-	if (!is_live())
-		dcookie_exit();
-
-	mutex_unlock(&dcookie_mutex);
-}
-
-EXPORT_SYMBOL_GPL(dcookie_register);
-EXPORT_SYMBOL_GPL(dcookie_unregister);
-EXPORT_SYMBOL_GPL(get_dcookie);
diff --git a/include/linux/dcookies.h b/include/linux/dcookies.h
deleted file mode 100644
index ddfdac20cad0..000000000000
--- a/include/linux/dcookies.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * dcookies.h
- *
- * Persistent cookie-path mappings
- *
- * Copyright 2002 John Levon <levon@movementarian.org>
- */
-
-#ifndef DCOOKIES_H
-#define DCOOKIES_H
- 
-
-#ifdef CONFIG_PROFILING
- 
-#include <linux/dcache.h>
-#include <linux/types.h>
- 
-struct dcookie_user;
-struct path;
- 
-/**
- * dcookie_register - register a user of dcookies
- *
- * Register as a dcookie user. Returns %NULL on failure.
- */
-struct dcookie_user * dcookie_register(void);
-
-/**
- * dcookie_unregister - unregister a user of dcookies
- *
- * Unregister as a dcookie user. This may invalidate
- * any dcookie values returned from get_dcookie().
- */
-void dcookie_unregister(struct dcookie_user * user);
-  
-/**
- * get_dcookie - acquire a dcookie
- *
- * Convert the given dentry/vfsmount pair into
- * a cookie value.
- *
- * Returns -EINVAL if no living task has registered as a
- * dcookie user.
- *
- * Returns 0 on success, with *cookie filled in
- */
-int get_dcookie(const struct path *path, unsigned long *cookie);
-
-#else
-
-static inline struct dcookie_user * dcookie_register(void)
-{
-	return NULL;
-}
-
-static inline void dcookie_unregister(struct dcookie_user * user)
-{
-	return;
-}
-
-static inline int get_dcookie(const struct path *path, unsigned long *cookie)
-{
-	return -ENOSYS;
-}
-
-#endif /* CONFIG_PROFILING */
-
-#endif /* DCOOKIES_H */
diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h
deleted file mode 100644
index b2a0f15f11fe..000000000000
--- a/include/linux/oprofile.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/**
- * @file oprofile.h
- *
- * API for machine-specific interrupts to interface
- * to oprofile.
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#ifndef OPROFILE_H
-#define OPROFILE_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/printk.h>
-#include <linux/atomic.h>
- 
-/* Each escaped entry is prefixed by ESCAPE_CODE
- * then one of the following codes, then the
- * relevant data.
- * These #defines live in this file so that arch-specific
- * buffer sync'ing code can access them.
- */
-#define ESCAPE_CODE			~0UL
-#define CTX_SWITCH_CODE			1
-#define CPU_SWITCH_CODE			2
-#define COOKIE_SWITCH_CODE		3
-#define KERNEL_ENTER_SWITCH_CODE	4
-#define KERNEL_EXIT_SWITCH_CODE		5
-#define MODULE_LOADED_CODE		6
-#define CTX_TGID_CODE			7
-#define TRACE_BEGIN_CODE		8
-#define TRACE_END_CODE			9
-#define XEN_ENTER_SWITCH_CODE		10
-#define SPU_PROFILING_CODE		11
-#define SPU_CTX_SWITCH_CODE		12
-#define IBS_FETCH_CODE			13
-#define IBS_OP_CODE			14
-
-struct dentry;
-struct file_operations;
-struct pt_regs;
- 
-/* Operations structure to be filled in */
-struct oprofile_operations {
-	/* create any necessary configuration files in the oprofile fs.
-	 * Optional. */
-	int (*create_files)(struct dentry * root);
-	/* Do any necessary interrupt setup. Optional. */
-	int (*setup)(void);
-	/* Do any necessary interrupt shutdown. Optional. */
-	void (*shutdown)(void);
-	/* Start delivering interrupts. */
-	int (*start)(void);
-	/* Stop delivering interrupts. */
-	void (*stop)(void);
-	/* Arch-specific buffer sync functions.
-	 * Return value = 0:  Success
-	 * Return value = -1: Failure
-	 * Return value = 1:  Run generic sync function
-	 */
-	int (*sync_start)(void);
-	int (*sync_stop)(void);
-
-	/* Initiate a stack backtrace. Optional. */
-	void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
-
-	/* Multiplex between different events. Optional. */
-	int (*switch_events)(void);
-	/* CPU identification string. */
-	char * cpu_type;
-};
-
-/**
- * One-time initialisation. *ops must be set to a filled-in
- * operations structure. This is called even in timer interrupt
- * mode so an arch can set a backtrace callback.
- *
- * If an error occurs, the fields should be left untouched.
- */
-int oprofile_arch_init(struct oprofile_operations * ops);
- 
-/**
- * One-time exit/cleanup for the arch.
- */
-void oprofile_arch_exit(void);
-
-/**
- * Add a sample. This may be called from any context.
- */
-void oprofile_add_sample(struct pt_regs * const regs, unsigned long event);
-
-/**
- * Add an extended sample.  Use this when the PC is not from the regs, and
- * we cannot determine if we're in kernel mode from the regs.
- *
- * This function does perform a backtrace.
- *
- */
-void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
-				unsigned long event, int is_kernel);
-
-/**
- * Add an hardware sample.
- */
-void oprofile_add_ext_hw_sample(unsigned long pc, struct pt_regs * const regs,
-	unsigned long event, int is_kernel,
-	struct task_struct *task);
-
-/* Use this instead when the PC value is not from the regs. Doesn't
- * backtrace. */
-void oprofile_add_pc(unsigned long pc, int is_kernel, unsigned long event);
-
-/* add a backtrace entry, to be called from the ->backtrace callback */
-void oprofile_add_trace(unsigned long eip);
-
-
-/**
- * Create a file of the given name as a child of the given root, with
- * the specified file operations.
- */
-int oprofilefs_create_file(struct dentry * root,
-	char const * name, const struct file_operations * fops);
-
-int oprofilefs_create_file_perm(struct dentry * root,
-	char const * name, const struct file_operations * fops, int perm);
- 
-/** Create a file for read/write access to an unsigned long. */
-int oprofilefs_create_ulong(struct dentry * root,
-	char const * name, ulong * val);
- 
-/** Create a file for read-only access to an unsigned long. */
-int oprofilefs_create_ro_ulong(struct dentry * root,
-	char const * name, ulong * val);
- 
-/** Create a file for read-only access to an atomic_t. */
-int oprofilefs_create_ro_atomic(struct dentry * root,
-	char const * name, atomic_t * val);
- 
-/** create a directory */
-struct dentry *oprofilefs_mkdir(struct dentry *parent, char const *name);
-
-/**
- * Write the given asciz string to the given user buffer @buf, updating *offset
- * appropriately. Returns bytes written or -EFAULT.
- */
-ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count, loff_t * offset);
-
-/**
- * Convert an unsigned long value into ASCII and copy it to the user buffer @buf,
- * updating *offset appropriately. Returns bytes written or -EFAULT.
- */
-ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t count, loff_t * offset);
-
-/**
- * Read an ASCII string for a number from a userspace buffer and fill *val on success.
- * Returns 0 on success, < 0 on error.
- */
-int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count);
-
-/** lock for read/write safety */
-extern raw_spinlock_t oprofilefs_lock;
-
-/**
- * Add the contents of a circular buffer to the event buffer.
- */
-void oprofile_put_buff(unsigned long *buf, unsigned int start,
-			unsigned int stop, unsigned int max);
-
-unsigned long oprofile_get_cpu_buffer_size(void);
-void oprofile_cpu_buffer_inc_smpl_lost(void);
- 
-/* cpu buffer functions */
-
-struct op_sample;
-
-struct op_entry {
-	struct ring_buffer_event *event;
-	struct op_sample *sample;
-	unsigned long size;
-	unsigned long *data;
-};
-
-void oprofile_write_reserve(struct op_entry *entry,
-			    struct pt_regs * const regs,
-			    unsigned long pc, int code, int size);
-int oprofile_add_data(struct op_entry *entry, unsigned long val);
-int oprofile_add_data64(struct op_entry *entry, u64 val);
-int oprofile_write_commit(struct op_entry *entry);
-
-#ifdef CONFIG_HW_PERF_EVENTS
-int __init oprofile_perf_init(struct oprofile_operations *ops);
-void oprofile_perf_exit(void);
-char *op_name_from_perf_id(void);
-#else
-static inline int __init oprofile_perf_init(struct oprofile_operations *ops)
-{
-	pr_info("oprofile: hardware counters not available\n");
-	return -ENODEV;
-}
-static inline void oprofile_perf_exit(void) { }
-#endif /* CONFIG_HW_PERF_EVENTS */
-
-#endif /* OPROFILE_H */
diff --git a/init/Kconfig b/init/Kconfig
index 29ad68325028..17e955fdec97 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2023,7 +2023,7 @@ config PROFILING
 	bool "Profiling support"
 	help
 	  Say Y here to enable the extended profiling support mechanisms used
-	  by profilers such as OProfile.
+	  by profilers.
 
 #
 # Place an empty function call at each tracepoint site. Can be
diff --git a/kernel/sys.c b/kernel/sys.c
index 51f00fe20e4d..6928d23c46ea 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -24,7 +24,6 @@
 #include <linux/times.h>
 #include <linux/posix-timers.h>
 #include <linux/security.h>
-#include <linux/dcookies.h>
 #include <linux/suspend.h>
 #include <linux/tty.h>
 #include <linux/signal.h>
diff --git a/usr/include/Makefile b/usr/include/Makefile
index f6b3c85d900e..1c2ae1368079 100644
--- a/usr/include/Makefile
+++ b/usr/include/Makefile
@@ -67,8 +67,6 @@ endif
 ifeq ($(SRCARCH),ia64)
 no-header-test += asm/setup.h
 no-header-test += asm/sigcontext.h
-no-header-test += asm/perfmon.h
-no-header-test += asm/perfmon_default_smpl.h
 no-header-test += linux/if_bonding.h
 endif