kernel/linux.git/virt/kvm/arm, branch v4.4.73

KVM: arm/arm64: Handle forward time correction gracefully

2016-05-04T21:48:40+00:00

commit 1c5631c73fc2261a5df64a72c155cb53dcdc0c45 upstream. On a host that runs NTP, corrections can have a direct impact on the background timer that we program on the behalf of a vcpu. In particular, NTP performing a forward correction will result in a timer expiring sooner than expected from a guest point of view. Not a big deal, we kick the vcpu anyway. But on wake-up, the vcpu thread is going to perform a check to find out whether or not it should block. And at that point, the timer check is going to say "timer has not expired yet, go back to sleep". This results in the timer event being lost forever. There are multiple ways to handle this. One would be record that the timer has expired and let kvm_cpu_has_pending_timer return true in that case, but that would be fairly invasive. Another is to check for the "short sleep" condition in the hrtimer callback, and restart the timer for the remaining time when the condition is detected. This patch implements the latter, with a bit of refactoring in order to avoid too much code duplication. Reported-by: Alexander Graf Reviewed-by: Alexander Graf Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: vgic: Ensure bitmaps are long enough

2016-03-03T23:07:29+00:00

commit 236cf17c2502007a9d2dda3c39fb0d9a6bd03cc2 upstream. When we allocate bitmaps in vgic_vcpu_init_maps, we divide the number of bits we need by 8 to figure out how many bytes to allocate. However, bitmap elements are always accessed as unsigned longs, and if we didn't happen to allocate a size such that size % sizeof(unsigned long) == 0, bitmap accesses may go past the end of the allocation. When using KASAN (which does byte-granular access checks), this results in a continuous stream of BUGs whenever these bitmaps are accessed: ============================================================================= BUG kmalloc-128 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in vgic_init.part.25+0x55c/0x990 age=7493 cpu=3 pid=1730 INFO: Slab 0xffffffbde6d5da40 objects=16 used=15 fp=0xffffffc935769700 flags=0x4000000000000080 INFO: Object 0xffffffc935769500 @offset=1280 fp=0x (null) Bytes b4 ffffffc9357694f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 3 PID: 1740 Comm: kvm-vcpu-0 Tainted: G B 4.4.0+ #17 Hardware name: ARM Juno development board (r1) (DT) Call trace: [] dump_backtrace+0x0/0x280 [] show_stack+0x14/0x20 [] dump_stack+0x100/0x188 [] print_trailer+0xfc/0x168 [] object_err+0x3c/0x50 [] kasan_report_error+0x244/0x558 [] __asan_report_load8_noabort+0x48/0x50 [] __bitmap_or+0xc0/0xc8 [] kvm_vgic_flush_hwstate+0x1bc/0x650 [] kvm_arch_vcpu_ioctl_run+0x2ec/0xa60 [] kvm_vcpu_ioctl+0x474/0xa68 [] do_vfs_ioctl+0x5b8/0xcb0 [] SyS_ioctl+0x8c/0xa0 [] el0_svc_naked+0x24/0x28 Memory state around the buggy address: ffffffc935769400: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffffc935769500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc935769580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769600: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix the issue by always allocating a multiple of sizeof(unsigned long), as we do elsewhere in the vgic code. Fixes: c1bfb577a ("arm/arm64: KVM: vgic: switch to dynamic allocation") Acked-by: Marc Zyngier Acked-by: Christoffer Dall Signed-off-by: Mark Rutland Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: Fix reference to uninitialised VGIC

2016-02-25T20:01:20+00:00

commit b3aff6ccbb1d25e506b60ccd9c559013903f3464 upstream. Commit 4b4b4512da2a ("arm/arm64: KVM: Rework the arch timer to use level-triggered semantics") brought the virtual architected timer closer to the VGIC. There is one occasion were we don't properly check for the VGIC actually having been initialized before, but instead go on to check the active state of some IRQ number. If userland hasn't instantiated a virtual GIC, we end up with a kernel NULL pointer dereference: ========= Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc9745c5000 [00000000] *pgd=00000009f631e003, *pud=00000009f631e003, *pmd=0000000000000000 Internal error: Oops: 96000006 [#2] PREEMPT SMP Modules linked in: CPU: 0 PID: 2144 Comm: kvm_simplest-ar Tainted: G D 4.5.0-rc2+ #1300 Hardware name: ARM Juno development board (r1) (DT) task: ffffffc976da8000 ti: ffffffc976e28000 task.ti: ffffffc976e28000 PC is at vgic_bitmap_get_irq_val+0x78/0x90 LR is at kvm_vgic_map_is_active+0xac/0xc8 pc : [] lr : [] pstate: 20000145 .... ========= Fix this by bailing out early of kvm_timer_flush_hwstate() if we don't have a VGIC at all. Reported-by: Cosmin Gorgovan Acked-by: Marc Zyngier Signed-off-by: Andre Przywara Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check

2015-12-11T16:33:31+00:00

External inputs to the vgic from time to time need to poke into the state of a virtual interrupt, the prime example is the architected timer code. Since the IRQ's active state can be represented in two places; the LR or the distributor, we first loop over the LRs but if not active in the LRs we just return if *any* IRQ is active on the VCPU in question. This is of course bogus, as we should check if the specific IRQ in quesiton is active on the distributor instead. Reported-by: Eric Auger Acked-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: vgic: Trust the LR state for HW IRQs

2015-11-24T17:08:37+00:00

We were probing the physial distributor state for the active state of a HW virtual IRQ, because we had seen evidence that the LR state was not cleared when the guest deactivated a virtual interrupted. However, this issue turned out to be a software bug in the GIC, which was solved by: 84aab5e68c2a5e1e18d81ae8308c3ce25d501b29 (KVM: arm/arm64: arch_timer: Preserve physical dist. active state on LR.active, 2015-11-24) Therefore, get rid of the complexities and just look at the LR. Reviewed-by: Marc Zyngier Signed-off-by: Christoffer Dall

KVM: arm/arm64: arch_timer: Preserve physical dist. active state on LR.active

2015-11-24T17:07:40+00:00

We were incorrectly removing the active state from the physical distributor on the timer interrupt when the timer output level was deasserted. We shouldn't be doing this without considering the virtual interrupt's active state, because the architecture requires that when an LR has the HW bit set and the pending or active bits set, then the physical interrupt must also have the corresponding bits set. This addresses an issue where we have been observing an inconsistency between the LR state and the physical distributor state where the LR state was active and the physical distributor was not active, which shouldn't happen. Reviewed-by: Marc Zyngier Signed-off-by: Christoffer Dall

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-11-06T00:26:26+00:00

Pull KVM updates from Paolo Bonzini: "First batch of KVM changes for 4.4. s390: A bunch of fixes and optimizations for interrupt and time handling. PPC: Mostly bug fixes. ARM: No big features, but many small fixes and prerequisites including: - a number of fixes for the arch-timer - introducing proper level-triggered semantics for the arch-timers - a series of patches to synchronously halt a guest (prerequisite for IRQ forwarding) - some tracepoint improvements - a tweak for the EL2 panic handlers - some more VGIC cleanups getting rid of redundant state x86: Quite a few changes: - support for VT-d posted interrupts (i.e. PCI devices can inject interrupts directly into vCPUs). This introduces a new component (in virt/lib/) that connects VFIO and KVM together. The same infrastructure will be used for ARM interrupt forwarding as well. - more Hyper-V features, though the main one Hyper-V synthetic interrupt controller will have to wait for 4.5. These will let KVM expose Hyper-V devices. - nested virtualization now supports VPID (same as PCID but for vCPUs) which makes it quite a bit faster - for future hardware that supports NVDIMM, there is support for clflushopt, clwb, pcommit - support for "split irqchip", i.e. LAPIC in kernel + IOAPIC/PIC/PIT in userspace, which reduces the attack surface of the hypervisor - obligatory smattering of SMM fixes - on the guest side, stable scheduler clock support was rewritten to not require help from the hypervisor" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits) KVM: VMX: Fix commit which broke PML KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0() KVM: x86: allow RSM from 64-bit mode KVM: VMX: fix SMEP and SMAP without EPT KVM: x86: move kvm_set_irq_inatomic to legacy device assignment KVM: device assignment: remove pointless #ifdefs KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic KVM: x86: zero apic_arb_prio on reset drivers/hv: share Hyper-V SynIC constants with userspace KVM: x86: handle SMBASE as physical address in RSM KVM: x86: add read_phys to x86_emulate_ops KVM: x86: removing unused variable KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr() KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings KVM: arm/arm64: Optimize away redundant LR tracking KVM: s390: use simple switch statement as multiplexer KVM: s390: drop useless newline in debugging data KVM: s390: SCA must not cross page boundaries KVM: arm: Do not indent the arguments of DECLARE_BITMAP ...

KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr()

2015-11-04T14:29:49+00:00

Now we see that vgic_set_lr() and vgic_sync_lr_elrsr() are always used together. Merge them into one function, saving from second vgic_ops dereferencing every time. Signed-off-by: Pavel Fedin Signed-off-by: Christoffer Dall

KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings

2015-11-04T14:29:49+00:00

1. Remove unnecessary 'irq' argument, because irq number can be retrieved from the LR. 2. Since cff9211eb1a1f58ce7f5a2d596b617928fd4be0e ("arm/arm64: KVM: Fix arch timer behavior for disabled interrupts ") LR_STATE_PENDING is queued back by vgic_retire_lr() itself. Also, it clears vlr.state itself. Therefore, we remove the same, now duplicated, check with all accompanying bit manipulations from vgic_unqueue_irqs(). 3. vgic_retire_lr() is always accompanied by vgic_irq_clear_queued(). Since it already does more than just clearing the LR, move vgic_irq_clear_queued() inside of it. Signed-off-by: Pavel Fedin Signed-off-by: Christoffer Dall

KVM: arm/arm64: Optimize away redundant LR tracking

2015-11-04T14:29:49+00:00

Currently we use vgic_irq_lr_map in order to track which LRs hold which IRQs, and lr_used bitmap in order to track which LRs are used or free. vgic_irq_lr_map is actually used only for piggy-back optimization, and can be easily replaced by iteration over lr_used. This is good because in future, when LPI support is introduced, number of IRQs will grow up to at least 16384, while numbers from 1024 to 8192 are never going to be used. This would be a huge memory waste. In its turn, lr_used is also completely redundant since ae705930fca6322600690df9dc1c7d0516145a93 ("arm/arm64: KVM: Keep elrsr/aisr in sync with software model"), because together with lr_used we also update elrsr. This allows to easily replace lr_used with elrsr, inverting all conditions (because in elrsr '1' means 'free'). Signed-off-by: Pavel Fedin Signed-off-by: Christoffer Dall