kernel/linux.git/tools, branch v6.7.3

selftests: bonding: do not test arp/ns target with mode balance-alb/tlb

2024-02-01T00:21:10+00:00

[ Upstream commit a2933a8759a62269754e54733d993b19de870e84 ] The prio_arp/ns tests hard code the mode to active-backup. At the same time, The balance-alb/tlb modes do not support arp/ns target. So remove the prio_arp/ns tests from the loop and only test active-backup mode. Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Reported-by: Jay Vosburgh Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/ Signed-off-by: Hangbin Liu Acked-by: Jay Vosburgh Link: https://lore.kernel.org/r/20240123075917.1576360-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

selftests: netdevsim: fix the udp_tunnel_nic test

2024-02-01T00:21:09+00:00

[ Upstream commit 0879020a7817e7ce636372c016b4528f541c9f4d ] This test is missing a whole bunch of checks for interface renaming and one ifup. Presumably it was only used on a system with renaming disabled and NetworkManager running. Fixes: 91f430b2c49d ("selftests: net: add a test for UDP tunnel info infra") Acked-by: Paolo Abeni Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240123060529.1033912-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: net: fix rps_default_mask with >32 CPUs

2024-02-01T00:21:09+00:00

[ Upstream commit 0719b5338a0cbe80d1637a5fb03d8141b5bfc7a1 ] If there is more than 32 cpus the bitmask will start to contain commas, leading to: ./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected Remove the commas, bash doesn't interpret leading zeroes as oct so that should be good enough. Switch to bash, Simon reports that not all shells support this type of substitution. Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask") Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240122195815.638997-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: fill in some missing configs for net

2024-02-01T00:21:07+00:00

[ Upstream commit 04fe7c5029cbdbcdb28917f09a958d939a8f19f7 ] We are missing a lot of config options from net selftests, it seems: tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP fib_tests: CONFIG_NET_SCH_FQ_CODEL l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH sctp-vrf: CONFIG_INET_DIAG txtimestamp: CONFIG_NET_CLS_U32 vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL ip_local_port_range: CONFIG_MPTCP fib_test: CONFIG_NET_CLS_BASIC rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE CONFIG_NET_IPGRE, CONFIG_BONDING fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING vxlan_mdb: CONFIG_NET_ACT_GACT tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305 psample: CONFIG_PSAMPLE fcnal: CONFIG_TCP_MD5SIG Try to add them in a semi-alphabetical order. Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test") Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask") Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE") Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftest: Don't reuse port for SO_INCOMING_CPU test.

2024-02-01T00:21:07+00:00

[ Upstream commit 97de5a15edf2d22184f5ff588656030bbb7fa358 ] Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to fire somewhat randomly. # # RUN so_incoming_cpu.before_reuseport.test3 ... # # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0) # # test3: Test terminated by assertion # # FAIL so_incoming_cpu.before_reuseport.test3 # not ok 3 so_incoming_cpu.before_reuseport.test3 When the test failed, not-yet-accepted CLOSE_WAIT sockets received SYN with a "challenging" SEQ number, which was sent from an unexpected CPU that did not create the receiver. The test basically does: 1. for each cpu: 1-1. create a server 1-2. set SO_INCOMING_CPU 2. for each cpu: 2-1. set cpu affinity 2-2. create some clients 2-3. let clients connect() to the server on the same cpu 2-4. close() clients 3. for each server: 3-1. accept() all child sockets 3-2. check if all children have the same SO_INCOMING_CPU with the server The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse. In a loop of 2., close() changed the client state to FIN_WAIT_2, and the peer transitioned to CLOSE_WAIT. In another loop of 2., connect() happened to select the same port of the FIN_WAIT_2 socket, and it was reused as the default value of net.ipv4.tcp_tw_reuse is 2. As a result, the new client sent SYN to the CLOSE_WAIT socket from a different CPU, and the receiver's sk_incoming_cpu was overwritten with unexpected CPU ID. Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket responded with Challenge ACK. The new client properly returned RST and effectively killed the CLOSE_WAIT socket. This way, all clients were created successfully, but the error was detected later by 3-2., ASSERT_EQ(cpu, i). To avoid the failure, let's make sure that (i) the number of clients is less than the number of available ports and (ii) such reuse never happens. Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.") Reported-by: Jakub Kicinski Signed-off-by: Kuniyuki Iwashima Tested-by: Jakub Kicinski Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

selftests: bonding: Increase timeout to 1200s

2024-02-01T00:21:05+00:00

[ Upstream commit b01f15a7571b7aa222458bc9bf26ab59bd84e384 ] When tests are run by runner.sh, bond_options.sh gets killed before it can complete: make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding" [...] # timeout set to 120 # selftests: drivers/net/bonding: bond_options.sh # TEST: prio (active-backup miimon primary_reselect 0) [ OK ] # TEST: prio (active-backup miimon primary_reselect 1) [ OK ] # TEST: prio (active-backup miimon primary_reselect 2) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ] # not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds This test includes many sleep statements, at least some of which are related to timers in the operation of the bonding driver itself. Increase the test timeout to allow the test to complete. I ran the test in slightly different VMs (including one without HW virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and 13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s. Fixes: 42a8d4aaea84 ("selftests: bonding: add bonding prio option test") Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t Suggested-by: Jakub Kicinski Signed-off-by: Benjamin Poirier Reviewed-by: Hangbin Liu Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mm: hugepage-vmemmap fails on 64K page size systems

2024-02-01T00:21:02+00:00

commit 00bcfcd47a52f50f07a2e88d730d7931384cb073 upstream. The kernel sefltest mm/hugepage-vmemmap fails on architectures which has different page size other than 4K. In hugepage-vmemmap page size used is 4k so the pfn calculation will go wrong on systems which has different page size .The length of MAP_HUGETLB memory must be hugepage aligned but in hugepage-vmemmap map length is 2M so this will not get aligned if the system has differnet hugepage size. Added psize() to get the page size and default_huge_page_size() to get the default hugepage size at run time, hugepage-vmemmap test pass on powerpc with 64K page size and x86 with 4K page size. Result on powerpc without patch (page size 64K) *# ./hugepage-vmemmap Returned address is 0x7effff000000 whose pfn is 0 Head page flags (100000000) is invalid check_page_flags: Invalid argument *# Result on powerpc with patch (page size 64K) *# ./hugepage-vmemmap Returned address is 0x7effff000000 whose pfn is 600 *# Result on x86 with patch (page size 4K) *# ./hugepage-vmemmap Returned address is 0x7fc7c2c00000 whose pfn is 1dac00 *# Link: https://lkml.kernel.org/r/3b3a3ae37ba21218481c482a872bbf7526031600.1704865754.git.donettom@linux.vnet.ibm.com Fixes: b147c89cd429 ("selftests: vm: add a hugetlb test case") Signed-off-by: Donet Tom Reported-by: Geetika Moolchandani Tested-by: Geetika Moolchandani Acked-by: Muchun Song Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

RISC-V: selftests: cbo: Ensure asm operands match constraints

2024-02-01T00:21:01+00:00

commit 0de65288d75ff96c30e216557d979fb9342c4323 upstream. The 'i' constraint expects a constant operand, which fn and its constant derivative MK_CBO(fn) are, but passing fn through a function as a parameter and using a local variable for MK_CBO(fn) allow the compiler to lose sight of that when no optimization is done. Use a macro instead of a function and skip the local variable to ensure the compiler uses constants, matching the asm constraints. Reported-by: Yunhui Cui Closes: https://lore.kernel.org/all/20240117082514.42967-1-cuiyunhui@bytedance.com Fixes: a29e2a48afe3 ("RISC-V: selftests: Add CBO tests") Signed-off-by: Andrew Jones Link: https://lore.kernel.org/r/20240117130933.57514-2-ajones@ventanamicro.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes

2024-01-25T23:45:31+00:00

[ Upstream commit b34f4de6d30cbaa8fed905a5080b6eace8c84dc7 ] 'qos_pfc' test checks PFC behavior. The idea is to limit the traffic using a shaper somewhere in the flow of the packets. In this area, the buffer is smaller than the buffer at the beginning of the flow, so it fills up until there is no more space left. The test configures there PFC which is supposed to notice that the headroom is filling up and send PFC Xoff to indicate the transmitter to stop sending traffic for the priorities sharing this PG. The Xon/Xoff threshold is auto-configured and always equal to 2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet, traffic will keep arriving until the transmitter receives and processes the PFC packet. This amount of traffic is known as the PFC delay allowance. Currently the buffer for the delay traffic is configured as 100KB. The MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB. This allows 80KB extra to be stored in this buffer. 8-lane ports use two buffers among which the configured buffer is split, the Xoff threshold then applies to each buffer in parallel. The test does not take into account the behavior of 8-lane ports, when the ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes, packets are dropped and the test fails. Check if the relevant ports use 8 lanes, in such case double the size of the buffer, as the headroom is split half-half. Cc: Shuah Khan Fixes: bfa804784e32 ("selftests: mlxsw: Add a PFC test") Signed-off-by: Amit Cohen Reviewed-by: Ido Schimmel Signed-off-by: Petr Machata Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

mlxsw: spectrum_acl_tcam: Fix stack corruption

2024-01-25T23:45:31+00:00

[ Upstream commit 483ae90d8f976f8339cf81066312e1329f2d3706 ] When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Reported-by: Orel Hagag Signed-off-by: Ido Schimmel Reviewed-by: Amit Cohen Signed-off-by: Petr Machata Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin