kernel/linux.git/tools/testing, branch v5.4.26

ktest: Add timeout for ssh sync testing

2020-03-18T06:17:51+00:00

commit 4d00fc477a2ce8b6d2b09fb34ef9fe9918e7d434 upstream. Before rebooting the box, a "ssh sync" is called to the test machine to see if it is alive or not. But if the test machine is in a partial state, that ssh may never actually finish, and the ktest test hangs. Add a 10 second timeout to the sync test, which will fail after 10 seconds and then cause the test to reboot the test machine. Cc: stable@vger.kernel.org Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

selftests/net/fib_tests: update addr_metric_test for peer route testing

2020-03-18T06:17:47+00:00

[ Upstream commit 0d29169a708bf730ede287248e429d579f432d1d ] This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by: Hangbin Liu Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: vxlan_bridge_1d: use more proper tos value

2020-03-12T12:00:17+00:00

[ Upstream commit 9b64208f74fbd0e920475ecfe9326f8443fdc3a5 ] 0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by: Petr Machata Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: vxlan_bridge_1d: fix tos value

2020-03-12T12:00:12+00:00

[ Upstream commit 4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 ] After commit 71130f29979c ("vxlan: fix tos value before xmit") we start strict vxlan xmit tos value by RT_TOS(), which limits the tos value less than 0x1E. With current value 0x40 the test will failed with "v1: Expected to capture 10 packets, got 0". So let's choose a smaller tos value for testing. Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testing

2020-03-12T12:00:12+00:00

[ Upstream commit e8023b030ce1748930e2dc76353a262fe47d4745 ] For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu Reviewed-by: Petr Machata Tested-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: fix too long argument

2020-03-12T12:00:10+00:00

[ Upstream commit c363eb48ada5cf732b3f489fab799fc881097842 ] With some shells, the command construed for install of bpf selftests becomes too large due to long list of files: make[1]: execvp: /bin/sh: Argument list too long make[1]: *** [../lib.mk:73: install] Error 127 Currently, each of the file lists is replicated three times in the command: in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that by one instance by using make conditionals and separate the echo and rsync into two shell commands. (One would be inclined to just remove the '@' at the beginning of the rsync command and let 'make' echo it by itself; unfortunately, it appears that the '@' in the front of mkdir silences output also for the following commands.) Also, separate handling of each of the lists to its own shell command. The semantics of the makefile is unchanged before and after the patch. The ability of individual test directories to override INSTALL_RULE is retained. Reported-by: Yauheni Kaliuta Tested-by: Yauheni Kaliuta Signed-off-by: Jiri Benc Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: Install settings files to fix TIMEOUT failures

2020-03-05T15:43:47+00:00

commit b9167c8078c3527de6da241c8a1a75a9224ed90a upstream. Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") added a 45 second timeout for tests, and also added a way for tests to customise the timeout via a settings file. For example the ftrace tests take multiple minutes to run, so they were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off timeout setting"). This works when the tests are run from the source tree. However if the tests are installed with "make -C tools/testing/selftests install", the settings files are not copied into the install directory. When the tests are then run from the install directory the longer timeouts are not applied and the tests timeout incorrectly. So add the settings files to TEST_FILES of the appropriate Makefiles to cause the settings files to be installed using the existing install logic. Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Michael Ellerman Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

ipv6: Fix route replacement with dev-only route

2020-03-05T15:43:35+00:00

[ Upstream commit e404b8c7cfb31654c9024d497cec58a501501692 ] After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bpf: Selftests build error in sockmap_basic.c

2020-02-28T16:22:28+00:00

commit f2e97dc126b712c0d21219ed0c42710006c1cf52 upstream. Fix following build error. We could push a tcp.h header into one of the include paths, but I think its easy enough to simply pull in the three defines we need here. If we end up using more of tcp.h at some point we can pull it in later. /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’: /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function) repair = TCP_REPAIR_ON; ^ /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function) repair = TCP_REPAIR_OFF_NO_WP; Then with fix, $ ./test_progs -n 44 #44/1 sockmap create_update_free:OK #44/2 sockhash create_update_free:OK #44 sockmap_basic:OK Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower Signed-off-by: Greg Kroah-Hartman

selftests/eeh: Bump EEH wait time to 60s

2020-02-24T07:36:57+00:00

[ Upstream commit 414f50434aa2463202a5b35e844f4125dd1a7101 ] Some newer cards supported by aacraid can take up to 40s to recover after an EEH event. This causes spurious failures in the basic EEH self-test since the current maximim timeout is only 30s. Fix the immediate issue by bumping the timeout to a default of 60s, and allow the wait time to be specified via an environmental variable (EEH_MAX_WAIT). Reported-by: Steve Best Suggested-by: Douglas Miller Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com Signed-off-by: Sasha Levin