kernel/linux.git/tools/testing, branch v5.10.258

selftests: lib.mk: Also install "config" and "settings"

2026-06-01T15:29:49+00:00

[ Upstream commit de53fa9baa701963722e9fa3d0fe34b897104497 ] Installed seccomp tests would time out because the "settings" file was missing. Install both "settings" (needed for proper test execution) and "config" (needed for informational purposes) with the other test targets. Signed-off-by: Kees Cook Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

ktest: Run POST_KTEST hooks on failure and cancellation

2026-06-01T15:29:34+00:00

[ Upstream commit bc6e165a452da909cef0efbc286e6695624db372 ] PRE_KTEST can be useful for setting up the environment and POST_KTEST to tear it down, however POST_KTEST only runs on the normal end-of-run path. It is skipped when ktest exits through dodie() or cancel_test(). Final cleanup hooks are skipped. Factor the final hook execution into run_post_ktest(), call it from the normal exit path and from the early exit paths, and guard it so the hook runs at most once. Cc: John Hawley Cc: Andrea Righi Cc: Marcos Paulo de Souza Cc: Matthieu Baerts Cc: Fernando Fernandez Mancera Cc: Pedro Falcato Link: https://patch.msgid.link/20260307-ktest-fixes-v1-8-565d412f4925@suse.com Fixes: 921ed4c7208e ("ktest: Add PRE/POST_KTEST and TEST options") Signed-off-by: Ricardo B. Marlière Signed-off-by: Steven Rostedt Signed-off-by: Sasha Levin

ktest: Honor empty per-test option overrides

2026-06-01T15:29:34+00:00

[ Upstream commit a2de57a3c8192dcd67cccaff6c341b93748d799b ] A per-test override can clear an inherited default option by assigning an empty value, but __set_test_option() still used option_defined() to decide whether a per-test key existed. That turned an empty per-test assignment back into "fall back to the default", so tests still could not clear inherited settings. For example: DEFAULTS (...) LOG_FILE = /tmp/ktest-empty-override.log CLEAR_LOG = 1 ADD_CONFIG = /tmp/.config TEST_START TEST_TYPE = build BUILD_TYPE = nobuild ADD_CONFIG = This would run the test with ADD_CONFIG[1] = /tmp/.config Fix by checking whether the per-test key exists before falling back. If it does exist but is empty, treat it as unset for that test and stop the fallback chain there. Cc: John Hawley Cc: Andrea Righi Cc: Marcos Paulo de Souza Cc: Matthieu Baerts Cc: Fernando Fernandez Mancera Cc: Pedro Falcato Link: https://patch.msgid.link/20260307-ktest-fixes-v1-4-565d412f4925@suse.com Fixes: 22c37a9ac49d ("ktest: Allow tests to undefine default options") Signed-off-by: Ricardo B. Marlière Signed-off-by: Steven Rostedt Signed-off-by: Sasha Levin

ktest: Avoid undef warning when WARNINGS_FILE is unset

2026-06-01T15:29:34+00:00

[ Upstream commit 057854f8a595160656fe77ed7bf0d2403724b915 ] check_buildlog() probes $warnings_file with -f even when WARNINGS_FILE is not configured. Perl warns about the uninitialized value and adds noise to the test log, which can hide the output we actually care about. Check that WARNINGS_FILE is defined before testing whether the file exists. Cc: John Hawley Cc: Andrea Righi Cc: Marcos Paulo de Souza Cc: Matthieu Baerts Cc: Fernando Fernandez Mancera Cc: Pedro Falcato Link: https://patch.msgid.link/20260307-ktest-fixes-v1-1-565d412f4925@suse.com Fixes: 4283b169abfb ("ktest: Add make_warnings_file and process full warnings") Signed-off-by: Ricardo B. Marlière Signed-off-by: Steven Rostedt Signed-off-by: Sasha Levin

selftest: memcg: skip memcg_sock test if address family not supported

2026-06-01T15:29:34+00:00

[ Upstream commit 2d028f3e4bbbfd448928a8d3d2814b0b04c214f4 ] The test_memcg_sock test in memcontrol.c sets up an IPv6 socket and send data over it to consume memory and verify that memory.stat.sock and memory.current values are close. On systems where IPv6 isn't enabled or not configured to support SOCK_STREAM, the test_memcg_sock test always fails. When the socket() call fails, there is no way we can test the memory consumption and verify the above claim. I believe it is better to just skip the test in this case instead of reporting a test failure hinting that there may be something wrong with the memcg code. Link: https://lkml.kernel.org/r/20260311200526.885899-1-longman@redhat.com Fixes: 5f8f019380b8 ("selftests: cgroup/memcontrol: add basic test for socket accounting") Signed-off-by: Waiman Long Acked-by: Michal Koutný Acked-by: Shakeel Butt Cc: Johannes Weiner Cc: Michal Hocko Cc: Michal Koutný Cc: Mike Rapoport Cc: Muchun Song Cc: Roman Gushchin Cc: Shuah Khan Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin

selftests/mqueue: Fix incorrectly named file

2026-06-01T15:29:19+00:00

commit 64fac99037689020ad97e472ae898e96ea3616dc upstream. Commit 85506aca2eb4 ("selftests/mqueue: Set timeout to 180 seconds") intended to increase the timeout for mq_perf_tests from the default kselftest limit of 45 seconds to 180 seconds. Unfortunately, the file storing this information was incorrectly named `setting` instead of `settings`, causing the kselftest runner not to pick up the limit and keep using the default 45 seconds limit. Fix this by renaming it to `settings` to ensure that the kselftest runner uses the increased timeout of 180 seconds for this test. Fixes: 85506aca2eb4 ("selftests/mqueue: Set timeout to 180 seconds") Cc: # 5.10.y Signed-off-by: Simon Liebold Link: https://lore.kernel.org/r/20260312140200.2224850-1-simonlie@amazon.de Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: more stable simult_flows tests

2026-04-18T08:30:51+00:00

commit 8c09412e584d9bcc0e71d758ec1008d1c8d1a326 upstream. By default, the netem qdisc can keep up to 1000 packets under its belly to deal with the configured rate and delay. The simult flows test-case simulates very low speed links, to avoid problems due to slow CPUs and the TCP stack tend to transmit at a slightly higher rate than the (virtual) link constraints. All the above causes a relatively large amount of packets being enqueued in the netem qdiscs - the longer the transfer, the longer the queue - producing increasingly high TCP RTT samples and consequently increasingly larger receive buffer size due to DRS. When the receive buffer size becomes considerably larger than the needed size, the tests results can flake, i.e. because minimal inaccuracy in the pacing rate can lead to a single subflow usage towards the end of the connection for a considerable amount of data. Address the issue explicitly setting netem limits suitable for the configured link speeds and unflake all the affected tests. Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests/mm/charge_reserved_hugetlb: drop mount size for hugetlbfs

2026-03-04T12:20:18+00:00

[ Upstream commit 1aa1dd9cc595917882fb6db67725442956f79607 ] charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a fixed size of 256M. On systems with large base hugepages (e.g. 512MB), this is smaller than a single hugepage, so the hugetlbfs mount ends up with zero capacity (often visible as size=0 in mount output). As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang waiting for progress. === Error log === # uname -r 6.12.0-xxx.el10.aarch64+64k #./charge_reserved_hugetlb.sh -cgroup-v2 # ----------------------------------------- ... # nr hugepages = 10 # writing cgroup limit: 5368709120 # writing reseravation limit: 5368709120 ... # write_to_hugetlbfs: Error mapping the file: Cannot allocate memory # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 ... # mount |grep /mnt/huge none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0) # grep -i huge /proc/meminfo ... HugePages_Total: 10 HugePages_Free: 10 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 524288 kB Hugetlb: 5242880 kB Drop the mount args with 'size=256M', so the filesystem capacity is sufficient regardless of HugeTLB page size. Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: Li Wang Acked-by: David Hildenbrand (Red Hat) Acked-by: Waiman Long Cc: Mark Brown Cc: Shuah Khan Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin

selftests: forwarding: tc_actions: Use ncat instead of nc

2026-03-04T12:19:47+00:00

[ Upstream commit 5e8670610b93158ffacc3241f835454ff26a3469 ] The test relies on 'nc' being the netcat version from the nmap project. While this seems to be the case on Fedora, it is not the case on Ubuntu, resulting in failures such as [1]. Fix by explicitly using the 'ncat' utility from the nmap project and the skip the test in case it is not installed. [1] # timeout set to 0 # selftests: net/forwarding: tc_actions.sh # TEST: gact drop and ok (skip_hw) [ OK ] # TEST: mirred egress flower redirect (skip_hw) [ OK ] # TEST: mirred egress flower mirror (skip_hw) [ OK ] # TEST: mirred egress matchall mirror (skip_hw) [ OK ] # TEST: mirred_egress_to_ingress (skip_hw) [ OK ] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL] # server output check failed # INFO: Could not test offloaded functionality not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1 Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") Reported-by: Mirsad Todorovac Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Tested-by: Mirsad Todorovac Reviewed-by: Hangbin Liu Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com Signed-off-by: Jakub Kicinski Stable-dep-of: 32b70e62034a ("selftests: tc_actions: don't dump 2MB of \0 to stdout") Signed-off-by: Sasha Levin

selftests: forwarding: tc_actions: cleanup temporary files when test is aborted

2026-03-04T12:19:47+00:00

[ Upstream commit f58531716ced8975a4ade108ef4af35f98722af7 ] remove temporary files created by 'mirred_egress_to_ingress_tcp' test in the cleanup() handler. Also, change variable names to avoid clashing with globals from lib.sh. Suggested-by: Paolo Abeni Signed-off-by: Davide Caratti Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski Stable-dep-of: 32b70e62034a ("selftests: tc_actions: don't dump 2MB of \0 to stdout") Signed-off-by: Sasha Levin