kernel/linux.git/tools/testing/selftests, branch v5.4.119

selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static

2021-05-14T07:44:32+00:00

[ Upstream commit c8d0260cdd96fdccdef0509c4160e28a1012a5d7 ] The FDB roaming test installs a destination MAC address on the wrong interface of an FDB database and tests whether the mirroring fails, because packets are sent to the wrong port. The test by mistake installs the FDB entry as local. This worked previously, because drivers were notified of local FDB entries in the same way as of static entries. However that has been fixed in the commit 6ab4c3117aec ("net: bridge: don't notify switchdev for local FDB addresses"), and local entries are not notified anymore. As a result, the HW is not reconfigured for the FDB roam, and mirroring keeps working, failing the test. To fix the issue, mark the FDB entry as static. Fixes: 9c7c8a82442c ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests") Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bpf: Update selftests to reflect new error states

2021-05-02T09:05:04+00:00

commit d7a5091351756d0ae8e63134313c455624e36a13 upstream. Update various selftest error messages: * The 'Rx tried to sub from different maps, paths, or prohibited types' is reworked into more specific/differentiated error messages for better guidance. * The change into 'value -4294967168 makes map_value pointer be out of bounds' is due to moving the mixed bounds check into the speculation handling and thus occuring slightly later than above mentioned sanity check. * The change into 'math between map_value pointer and register with unbounded min value' is similarly due to register sanity check coming before the mixed bounds check. * The case of 'map access: known scalar += value_ptr from different maps' now loads fine given masks are the same from the different paths (despite max map value size being different). Signed-off-by: Daniel Borkmann Reviewed-by: John Fastabend Acked-by: Alexei Starovoitov [fllinden@amazon - skip bounds.c test mods, they won't change error msg on 5.4] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

flow_dissector: fix TTL and TOS dissection on IPv4 fragments

2021-04-07T12:47:40+00:00

[ Upstream commit d2126838050ccd1dadf310ffb78b2204f3b032b9 ] the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop doesn't drop all IPv4 packets that match the configured TTL / destination address. In particular, if "fragment offset" or "more fragments" have non zero value in the IPv4 header, setting of FLOW_DISSECTOR_KEY_IP is simply ignored. Fix this dissecting IPv4 TTL and TOS before fragment info; while at it, add a selftest for tc flower's match on 'ip_ttl' that verifies the correct behavior. Fixes: 518d8a2e9bad ("net/flow_dissector: add support for dissection of misc ip header fields") Reported-by: Shuang Li Signed-off-by: Davide Caratti Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value

2021-03-30T12:35:27+00:00

[ Upstream commit 5aa3c334a449bab24519c4967f5ac2b3304c8dcf ] The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01 should be inner ECT(0) + outer ECT(1). Based on the description of __INET_ECN_decapsulate, the final decapsulate value should be ECT(1). So fix the test expect value to 0x01. Before the fix: TEST: VXLAN: ECN decap: 01/02->0x02 [FAIL] Expected to capture 10 packets, got 0. After the fix: TEST: VXLAN: ECN decap: 01/02->0x01 [ OK ] Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests/bpf: Set gopt opt_class to 0 if get tunnel opt failed

2021-03-30T12:35:25+00:00

[ Upstream commit 31254dc9566221429d2cfb45fd5737985d70f2b6 ] When fixing the bpf test_tunnel.sh geneve failure. I only fixed the IPv4 part but forgot the IPv6 issue. Similar with the IPv4 fixes 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt"), when there is no tunnel option and bpf_skb_get_tunnel_opt() returns error, there is no need to drop the packets and break all geneve rx traffic. Just set opt_class to 0 and keep returning TC_ACT_OK at the end. Fixes: 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt") Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Hangbin Liu Signed-off-by: Daniel Borkmann Acked-by: William Tu Link: https://lore.kernel.org/bpf/20210309032214.2112438-1-liuhangbin@gmail.com Signed-off-by: Sasha Levin

bpf, selftests: Fix up some test_verifier cases for unprivileged

2021-03-20T09:39:46+00:00

commit 0a13e3537ea67452d549a6a80da3776d6b7dedb3 upstream. Fix up test_verifier error messages for the case where the original error message changed, or for the case where pointer alu errors differ between privileged and unprivileged tests. Also, add alternative tests for keeping coverage of the original verifier rejection error message (fp alu), and newly reject map_ptr += rX where rX == 0 given we now forbid alu on these types for unprivileged. All test_verifier cases pass after the change. The test case fixups were kept separate to ease backporting of core changes. Signed-off-by: Piotr Krysiuk Co-developed-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: Fix race condition in mirror installation

2021-03-17T16:03:37+00:00

commit edcbf5137f093b5502f5f6b97cce3cbadbde27aa upstream. When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent, so that it is always valid. Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test") Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Mask bpf_csum_diff() return value to 16 bits in test_verifier

2021-03-17T16:03:33+00:00

commit 6185266c5a853bb0f2a459e3ff594546f277609b upstream. The verifier test labelled "valid read map access into a read-only array 2" calls the bpf_csum_diff() helper and checks its return value. However, architecture implementations of csum_partial() (which is what the helper uses) differ in whether they fold the return value to 16 bit or not. For example, x86 version has ... if (unlikely(odd)) { result = from32to16(result); result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); } ... while generic lib/checksum.c does: result = from32to16(result); if (odd) result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); This makes the helper return different values on different architectures, breaking the test on non-x86. To fix this, add an additional instruction to always mask the return value to 16 bits, and update the expected return value accordingly. Fixes: fb2abb73e575 ("bpf, selftest: test {rd, wr}only flags and direct value access") Signed-off-by: Yauheni Kaliuta Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210228103017.320240-1-yauheni.kaliuta@redhat.com Signed-off-by: Greg Kroah-Hartman

selftests/bpf: No need to drop the packet when there is no geneve opt

2021-03-17T16:03:32+00:00

commit 557c223b643a35effec9654958d8edc62fd2603a upstream. In bpf geneve tunnel test we set geneve option on tx side. On rx side we only call bpf_skb_get_tunnel_opt(). Since commit 9c2e14b48119 ("ip_tunnels: Set tunnel option flag when tunnel metadata is present") geneve_rx() will not add TUNNEL_GENEVE_OPT flag if there is no geneve option, which cause bpf_skb_get_tunnel_opt() return ENOENT and _geneve_get_tunnel() in test_tunnel_kern.c drop the packet. As it should be valid that bpf_skb_get_tunnel_opt() return error when there is not tunnel option, there is no need to drop the packet and break all geneve rx traffic. Just set opt_class to 0 in this test and keep returning TC_ACT_OK. Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Hangbin Liu Signed-off-by: Daniel Borkmann Acked-by: William Tu Link: https://lore.kernel.org/bpf/20210224081403.1425474-1-liuhangbin@gmail.com Signed-off-by: Greg Kroah-Hartman

selftests/powerpc: Make the test check in eeh-basic.sh posix compliant

2021-03-04T09:26:26+00:00

[ Upstream commit 3db380570af7052620ace20c29e244938610ca71 ] The == operand is a bash extension, thus this will fail on Ubuntu with: ./eeh-basic.sh: 89: test: 2: unexpected operator As the /bin/sh on Ubuntu is pointed to DASH. Use -eq to fix this posix compatibility issue. Fixes: 996f9e0f93f162 ("selftests/powerpc: Fix eeh-basic.sh exit codes") Signed-off-by: Po-Hsu Lin Reviewed-by: Frederic Barrat Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com Signed-off-by: Sasha Levin