kernel/linux.git/tools/testing/selftests/wireguard, branch v6.1.168

wireguard: selftests: load nf_conntrack if not present

2024-12-14T18:53:34+00:00

[ Upstream commit 0290abc9860917f1ee8b58309c2bbd740a39ee8e ] Some distros may not load nf_conntrack by default, which will cause subsequent nf_conntrack sets to fail. Load this module if it is not already loaded. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Hangbin Liu Reviewed-by: Simon Horman [ Jason: add [[ -e ... ]] check so this works in the qemu harness. ] Signed-off-by: Jason A. Donenfeld Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

wireguard: selftests: use acpi=off instead of -no-acpi for recent QEMU

2024-07-18T11:18:41+00:00

commit 2cb489eb8dfc291060516df313ff31f4f9f3d794 upstream. QEMU 9.0 removed -no-acpi, in favor of machine properties, so update the Makefile to use the correct QEMU invocation. Cc: stable@vger.kernel.org Fixes: b83fdcd9fb8a ("wireguard: selftests: use microvm on x86") Signed-off-by: Jason A. Donenfeld Link: https://patch.msgid.link/20240704154517.1572127-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

wireguard: netlink: send staged packets when setting initial private key

2023-07-19T14:22:17+00:00

commit f58d0a9b4c6a7a5199c3af967e43cc8b654604d4 upstream. Packets bound for peers can queue up prior to the device private key being set. For example, if persistent keepalive is set, a packet is queued up to be sent as soon as the device comes up. However, if the private key hasn't been set yet, the handshake message never sends, and no timer is armed to retry, since that would be pointless. But, if a user later sets a private key, the expectation is that those queued packets, such as a persistent keepalive, are actually sent. So adjust the configuration logic to account for this edge case, and add a test case to make sure this works. Maxim noticed this with a wg-quick(8) config to the tune of: [Interface] PostUp = wg set %i private-key somefile [Peer] PublicKey = ... Endpoint = ... PersistentKeepalive = 25 Here, the private key gets set after the device comes up using a PostUp script, triggering the bug. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Reported-by: Maxim Cournoyer Tested-by: Maxim Cournoyer Link: https://lore.kernel.org/wireguard/87fs7xtqrv.fsf@gmail.com/ Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

wireguard: selftests: do not install headers on UML

2022-09-20T18:26:14+00:00

Since 1b620d539ccc ("kbuild: disable header exports for UML in a straightforward way"), installing headers fails on UML, so just disable installing them, since they're not needed anyway on the architecture. Fixes: b438b3b8d6e6 ("wireguard: selftests: support UML") Signed-off-by: Jason A. Donenfeld Signed-off-by: Jakub Kicinski

wireguard: selftests: set CONFIG_NONPORTABLE on riscv32

2022-08-12T14:47:12+00:00

When the CONFIG_PORTABLE/CONFIG_NONPORTABLE switches were added, various configs were updated, but the wireguard config was forgotten about. This leads to unbootable test kernels, causing CI fails. Add CONFIG_NONPORTABLE=y to the wireguard test suite configuration for riscv32. Fixes: 44c1e84a38a0 ("RISC-V: Add CONFIG_{NON,}PORTABLE") Signed-off-by: Jason A. Donenfeld Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220809145757.83673-1-Jason@zx2c4.com Signed-off-by: Palmer Dabbelt

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-08-03T23:29:08+00:00

Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ...

wireguard: selftests: support UML

2022-08-02T20:47:50+00:00

This shoud open up various possibilities like time travel execution, and is also just another platform to help shake out bugs. Cc: Johannes Berg Signed-off-by: Jason A. Donenfeld Signed-off-by: Jakub Kicinski

wireguard: selftests: update config fragments

2022-08-02T20:47:50+00:00

The kernel.config and debug.config fragments in wireguard selftests mention some config symbols that have been reworked: Commit c5665868183f ("mm: kmemleak: use the memory pool for early allocations") removes the config DEBUG_KMEMLEAK_EARLY_LOG_SIZE and since then, the config's feature is available without further configuration. Commit 4675ff05de2d ("kmemcheck: rip it out") removes kmemcheck and the corresponding arch config HAVE_ARCH_KMEMCHECK. There is no need for this config. Commit 3bf195ae6037 ("netfilter: nat: merge nf_nat_ipv4,6 into nat core") removes the config NF_NAT_IPV4 and since then, the config's feature is available without further configuration. Commit 41a2901e7d22 ("rcu: Remove SPARSE_RCU_POINTER Kconfig option") removes the config SPARSE_RCU_POINTER and since then, the config's feature is enabled by default. Commit dfb4357da6dd ("time: Remove CONFIG_TIMER_STATS") removes the feature and config CONFIG_TIMER_STATS without any replacement. Commit 3ca17b1f3628 ("lib/ubsan: remove null-pointer checks") removes the check and config UBSAN_NULL without any replacement. Adjust the config fragments to those changes in configs. Signed-off-by: Lukas Bulwahn Signed-off-by: Jason A. Donenfeld Signed-off-by: Jakub Kicinski

random: remove CONFIG_ARCH_RANDOM

2022-07-18T13:03:37+00:00

When RDRAND was introduced, there was much discussion on whether it should be trusted and how the kernel should handle that. Initially, two mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and "nordrand", a boot-time switch. Later the thinking evolved. With a properly designed RNG, using RDRAND values alone won't harm anything, even if the outputs are malicious. Rather, the issue is whether those values are being *trusted* to be good or not. And so a new set of options were introduced as the real ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu". With these options, RDRAND is used, but it's not always credited. So in the worst case, it does nothing, and in the best case, maybe it helps. Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the center and became something certain platforms force-select. The old options don't really help with much, and it's a bit odd to have special handling for these instructions when the kernel can deal fine with the existence or untrusted existence or broken existence or non-existence of that CPU capability. Simplify the situation by removing CONFIG_ARCH_RANDOM and using the ordinary asm-generic fallback pattern instead, keeping the two options that are actually used. For now it leaves "nordrand" for now, as the removal of that will take a different route. Acked-by: Michael Ellerman Acked-by: Catalin Marinas Acked-by: Borislav Petkov Acked-by: Heiko Carstens Acked-by: Greg Kroah-Hartman Signed-off-by: Jason A. Donenfeld

wireguard: selftests: use microvm on x86

2022-07-07T03:04:06+00:00

This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld Signed-off-by: Jakub Kicinski