kernel/linux.git/tools/testing/selftests/vm, branch v4.17.5

selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus

2018-03-10T00:40:01+00:00

Fix userfaultfd_hugetlb on hosts which have more than 64 cpus. --------------------------- running userfaultfd_hugetlb --------------------------- invalid MiB Usage: [FAIL] Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size >= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host cpus > 64, it requires more than 128M. [zhijianx.li@intel.com: update changelog/comments and variable name] Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Signed-off-by: Li Zhijian Cc: Shuah Khan Cc: SeongJae Park Cc: Philippe Ombredanne Cc: Aneesh Kumar K.V Cc: Mike Kravetz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

selftests: vm: update .gitignore with new test

2018-02-26T23:09:50+00:00

Update .gitignore with new test. Signed-off-by: Shuah Khan

Merge tag 'linux-kselftest-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2018-02-03T21:01:19+00:00

Pull kselftest updates from Shuah Khan: "This update to Kselftest consists of fixes, cleanups, and SPDX license additions" * tag 'linux-kselftest-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: update .gitignore with missing generated file selftests/x86: Add {,_32,_64} targets selftests: Fix loss of test output in run_kselftests.sh selftest: ftrace: Fix to add 256 kprobe events correctly selftest: ftrace: Fix to pick text symbols for kprobes selftests: media_tests: Add SPDX license identifier selftests: kselftest.h: Add SPDX license identifier selftests: kselftest_install.sh: Add SPDX license identifier selftests: gen_kselftest_tar.h: Add SPDX license identifier selftests: media_tests: Fix Makefile 'clean' target warning tools/testing: Fix trailing semicolon kselftest: fix OOM in memory compaction test selftests: seccomp: fix compile error seccomp_bpf

selftests/vm: move 128TB mmap boundary test to generic directory

2018-02-01T01:18:37+00:00

Architectures like PPC64 support mmap hint address based large address space selection. This test can be run on those architectures too. Move the test from the x86 selftests to selftest/vm so that other architectures can use it too. We also add a few new test scenarios in this patch. We do test a few boundary conditions before we do a high address mmap. PPC64 uses the address limit to validate the address in the fault path. We had bugs in this area w.r.t SLB fault handling before we updated the addess limit. We also touch the allocated space to make sure we don't have any bugs in the fault handling path. [akpm@linux-foundation.org: restore tools/testing/selftests/vm/Makefile alpha ordering] Link: http://lkml.kernel.org/r/20171123165226.32582-1-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V Cc: "Kirill A . Shutemov" Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

selftests: vm: update .gitignore with missing generated file

2018-01-23T14:47:06+00:00

Add missing generated file to .gitignore. Signed-off-by: Shuah Khan

kselftest: fix OOM in memory compaction test

2018-01-10T15:22:47+00:00

Running the compaction_test sometimes results in out-of-memory failures. When I debugged this, it turned out that the code to reset the number of hugepages to the initial value is simply broken since we write into an open sysctl file descriptor multiple times without seeking back to the start. Adding the lseek here fixes the problem. Cc: stable@vger.kernel.org Reported-by: Naresh Kamboju Link: https://bugs.linaro.org/show_bug.cgi?id=3145 Signed-off-by: Arnd Bergmann Signed-off-by: Shuah Khan

Merge branch 'akpm' (patches from Andrew)

2017-11-18T00:56:17+00:00

Merge more updates from Andrew Morton: - a bit more MM - procfs updates - dynamic-debug fixes - lib/ updates - checkpatch - epoll - nilfs2 - signals - rapidio - PID management cleanup and optimization - kcov updates - sysvipc updates - quite a few misc things all over the place * emailed patches from Andrew Morton : (94 commits) EXPERT Kconfig menu: fix broken EXPERT menu include/asm-generic/topology.h: remove unused parent_node() macro arch/tile/include/asm/topology.h: remove unused parent_node() macro arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro arch/sh/include/asm/topology.h: remove unused parent_node() macro arch/ia64/include/asm/topology.h: remove unused parent_node() macro drivers/pcmcia/sa1111_badge4.c: avoid unused function warning mm: add infrastructure for get_user_pages_fast() benchmarking sysvipc: make get_maxid O(1) again sysvipc: properly name ipc_addid() limit parameter sysvipc: duplicate lock comments wrt ipc_addid() sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE initramfs: use time64_t timestamps drivers/watchdog: make use of devm_register_reboot_notifier() kernel/reboot.c: add devm_register_reboot_notifier() kcov: update documentation Makefile: support flag -fsanitizer-coverage=trace-cmp kcov: support comparison operands collection kcov: remove pointless current != NULL check kernel/panic.c: add TAINT_AUX ...

mm: add infrastructure for get_user_pages_fast() benchmarking

2017-11-18T00:10:04+00:00

Performance of get_user_pages_fast() is critical for some workloads, but it's tricky to test it directly. This patch provides /sys/kernel/debug/gup_benchmark that helps with testing performance of it. See tools/testing/selftests/vm/gup_benchmark.c for userspace counterpart. Link: http://lkml.kernel.org/r/20170908215603.9189-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov Cc: Shuah Khan Cc: Ingo Molnar Cc: Thorsten Leemhuis Cc: Jonathan Corbet Cc: Huang Ying Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

selftests: vm: Update .gitignore with newly added tests

2017-11-15T15:01:42+00:00

Update .gitignore with newly added tests. Signed-off-by: Shuah Khan

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman