kernel/linux.git/tools/testing/selftests/powerpc, branch v5.10.89

selftests/powerpc: Fix "no_handler" EBB selftest

2021-07-20T14:05:43+00:00

[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ] The "no_handler_test" in ebb selftests attempts to read the PMU registers twice via helper function "dump_ebb_state". First dump is just before closing of event and the second invocation is done after closing of the event. The original intention of second dump_ebb_state was to dump the state of registers at the end of the test when the counters are frozen. But this will be achieved with the first call itself since sample period is set to low value and PMU will be frozen by then. Hence patch removes the dump which was done before closing of the event. Reported-by: Shirisha Ganta Signed-off-by: Athira Rajeev Tested-by: Nageswara R Sastry > Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin

selftests/powerpc: Fix L1D flushing tests for Power10

2021-05-19T08:12:54+00:00

[ Upstream commit 3a72c94ebfb1f171eba0715998010678a09ec796 ] The rfi_flush and entry_flush selftests work by using the PM_LD_MISS_L1 perf event to count L1D misses. The value of this event has changed over time: - Power7 uses 0x400f0 - Power8 and Power9 use both 0x400f0 and 0x3e054 - Power10 uses only 0x3e054 Rather than relying on raw values, configure perf to count L1D read misses in the most explicit way available. This fixes the selftests to work on systems without 0x400f0 as PM_LD_MISS_L1, and should change no behaviour for systems that the tests already worked on. The only potential downside is that referring to a specific perf event requires PMU support implemented in the kernel for that platform. Signed-off-by: Russell Currey Acked-by: Daniel Axtens Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210223070227.2916871-1-ruscur@russell.cc Signed-off-by: Sasha Levin

selftests/powerpc: Make the test check in eeh-basic.sh posix compliant

2021-03-04T10:37:53+00:00

[ Upstream commit 3db380570af7052620ace20c29e244938610ca71 ] The == operand is a bash extension, thus this will fail on Ubuntu with: ./eeh-basic.sh: 89: test: 2: unexpected operator As the /bin/sh on Ubuntu is pointed to DASH. Use -eq to fix this posix compatibility issue. Fixes: 996f9e0f93f162 ("selftests/powerpc: Fix eeh-basic.sh exit codes") Signed-off-by: Po-Hsu Lin Reviewed-by: Frederic Barrat Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com Signed-off-by: Sasha Levin

selftests/powerpc: Only test lwm/stmw on big endian

2021-02-07T14:37:16+00:00

[ Upstream commit dd3a44c06f7b4f14e90065bf05d62c255b20005f ] Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in little endian mode. That breaks compilation of our alignment handler test: /tmp/cco4l14N.s: Assembler messages: /tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian /tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1 These tests do pass on little endian machines, as the kernel will still emulate those instructions even when running little endian (which is arguably a kernel bug). But we don't really need to test that case, so ifdef those instructions out to get the alignment test building again. Reported-by: Libor Pechacek Signed-off-by: Michael Ellerman Tested-by: Libor Pechacek Link: https://lore.kernel.org/r/20210119041800.3093047-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin

selftests/powerpc: Fix exit status of pkey tests

2021-01-27T10:55:21+00:00

commit 92a5e1fdb286851d5bd0eb966b8d075be27cf5ee upstream. Since main() does not return a value explicitly, the return values from FAIL_IF() conditions are ignored and the tests can still pass irrespective of failures. This makes sure that we always explicitly return the correct test exit status. Fixes: 1addb6444791 ("selftests/powerpc: Add test for execute-disabled pkeys") Fixes: c27f2fd1705a ("selftests/powerpc: Add test for pkey siginfo verification") Reported-by: Eirik Fuller Signed-off-by: Sandipan Das Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210118093145.10134-1-sandipan@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

selftests/powerpc: refactor entry and rfi_flush tests

2020-11-19T12:47:23+00:00

For simplicity in backporting, the original entry_flush test contained a lot of duplicated code from the rfi_flush test. De-duplicate that code. Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman

selftests/powerpc: entry flush test

2020-11-19T12:47:20+00:00

Add a test modelled on the RFI flush test which counts the number of L1D misses doing a simple syscall with the entry flush on and off. For simplicity of backporting, this test duplicates a lot of code from rfi_flush. We clean that up in the next patch. Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman

selftests/powerpc: rfi_flush: disable entry flush if present

2020-11-19T12:47:12+00:00

We are about to add an entry flush. The rfi (exit) flush test measures the number of L1D flushes over a syscall with the RFI flush enabled and disabled. But if the entry flush is also enabled, the effect of enabling and disabling the RFI flush is masked. If there is a debugfs entry for the entry flush, disable it during the RFI flush and restore it later. Reported-by: Spoorthy S Signed-off-by: Russell Currey Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman

Merge tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-10-24T18:09:13+00:00

Pull powerpc fixes from Michael Ellerman: - A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the emulation of VSX loads. The affected CPUs were not widely available. - Two fixes for machine check handling in guests under PowerVM. - A fix for our recent changes to SMP setup, when CONFIG_CPUMASK_OFFSTACK=y. - Three fixes for races in the handling of some of our powernv sysfs attributes. - One change to remove TM from the set of Power10 CPU features. - A couple of other minor fixes. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai, Srikar Dronamraju, Vasant Hegde. * tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Avoid using addr_to_pfn in real mode powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9 powerpc/eeh: Fix eeh_dev_check_failure() for PE#0 powerpc/64s: Remove TM from Power10 features selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation powerpc/powernv/dump: Handle multiple writes to ack attribute powerpc/powernv/dump: Fix race while processing OPAL dump powerpc/smp: Use GFP_ATOMIC while allocating tmp mask powerpc/smp: Remove unnecessary variable powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash powerpc/opal_elog: Handle multiple writes to ack attribute

selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround

2020-10-19T21:00:42+00:00

alignment_handler currently only tests the unaligned cases but it can also be useful for testing the workaround for the P9N DD2.1 vector CI load issue fixed by p9_hmi_special_emu(). This workaround was introduced in 5080332c2c89 ("powerpc/64s: Add workaround for P9 vector CI load issue"). This changes the loop to start from offset 0 rather than 1 so that we test the kernel emulation in p9_hmi_special_emu(). Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201013043741.743413-2-mikey@neuling.org