kernel/linux.git/tools/testing/selftests/powerpc/pmu, branch linux-4.4.y

selftests/powerpc: Fix "no_handler" EBB selftest

2021-07-20T14:22:41+00:00

[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ] The "no_handler_test" in ebb selftests attempts to read the PMU registers twice via helper function "dump_ebb_state". First dump is just before closing of event and the second invocation is done after closing of the event. The original intention of second dump_ebb_state was to dump the state of registers at the end of the test when the counters are frozen. But this will be achieved with the first call itself since sample period is set to low value and PMU will be frozen by then. Hence patch removes the dump which was done before closing of the event. Reported-by: Shirisha Ganta Signed-off-by: Athira Rajeev Tested-by: Nageswara R Sastry > Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin

selftests/powerpc: Purge extra count_pmc() calls of ebb selftests

2020-09-03T09:19:24+00:00

[ Upstream commit 3337bf41e0dd70b4064cdf60acdfcdc2d050066c ] An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per- formed when count_pmc() is used to reset PMCs on a few selftests. This extra pmc_count can occasionally invalidate results, such as the ones from cycles_test shown hereafter. The ebb_check_count() failed with an above the upper limit error due to the extra value on ebb_state.stats.pmc_count. Furthermore, this extra count is also indicated by extra PMC1 trace_log on the output of the cycle test (as well as on pmc56_overflow_test): ========== ... [21]: counter = 8 [22]: register SPRN_MMCR0 = 0x0000000080000080 [23]: register SPRN_PMC1 = 0x0000000080000004 [24]: counter = 9 [25]: register SPRN_MMCR0 = 0x0000000080000080 [26]: register SPRN_PMC1 = 0x0000000080000004 [27]: counter = 10 [28]: register SPRN_MMCR0 = 0x0000000080000080 [29]: register SPRN_PMC1 = 0x0000000080000004 >> [30]: register SPRN_PMC1 = 0x000000004000051e PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e) [FAIL] Test FAILED on line 52 failure: cycles ========== Signed-off-by: Desnes A. Nunes do Rosario Tested-by: Sachin Sant Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com Signed-off-by: Sasha Levin

selftest/powerpc: Wrong PMC initialized in pmc56_overflow test

2017-01-26T07:23:50+00:00

commit df21d2fa733035e4d414379960f94b2516b41296 upstream. Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453f6ba ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

selftests/powerpc: Run EBB tests only on POWER8

2015-10-19T08:42:08+00:00

EBB (Event Based Branches) are currently only available on POWER8, so we should skip them on other CPUs. I've found that at least one test loops forever on 970MP (cycles_with_freeze_test). Signed-off-by: Denis Kirjanov [mpe: Minor change log editing, add skip to cpu_event_vs_ebb_test] Signed-off-by: Michael Ellerman

selftests/powerpc: Fix the pmu install rule

2015-05-01T03:00:26+00:00

My patch to add install support for the powerpc selftests had a typo, leading to the three tests in the pmu directory itself not being installed. Fixes: 6faeeea44b84 ("selftests: Add install support for the powerpc tests") Signed-off-by: Michael Ellerman

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2015-04-16T18:53:32+00:00

Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile

selftests/powerpc: Move get_auxv_entry() to harness.c

2015-04-11T10:49:20+00:00

Move get_auxv_entry() from pmu/lib.c up to harness.c in order to make it available to other tests. Signed-off-by: Sam Bobroff Signed-off-by: Michael Ellerman

selftests: Add install support for the powerpc tests

2015-03-19T18:38:51+00:00

The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman Signed-off-by: Shuah Khan

selftests/powerpc: Make git ignore all binaries in powerpc test suite

2015-01-23T03:02:49+00:00

This patch includes all of the powerpc test binaries into the .gitignore file listing in their respective directories. This will make sure that git ignores all of these test binaries when displaying status. Signed-off-by: Anshuman Khandual Signed-off-by: Michael Ellerman

selftests/powerpc: Add test of per-event excludes

2014-07-28T04:11:33+00:00

Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt