kernel/linux.git/tools/testing/selftests/powerpc/Makefile, branch v6.19.11

selftests/powerpc: Install tests in sub-directories

2024-04-29T13:54:43+00:00

The sources for the powerpc selftests are arranged into sub-directories. However when the tests are built and installed, the sub-directories are squashed, losing the structure. For example, with the current code the result of installing the selftests is: $ tree tools/testing/selftests/kselftest_install tools/testing/selftests/kselftest_install ├── kselftest │ ├── ktap_helpers.sh │ ├── module.sh │ ├── prefix.pl │ └── runner.sh ├── kselftest-list.txt ├── powerpc │ ├── alignment_handler │ ├── attr_test │ ├── back_to_back_ebbs_test │ ├── bad_accesses │ ├── bhrb_filter_map_test │ ├── bhrb_no_crash_wo_pmu_test │ ├── blacklisted_events_test │ ├── cache_shape │ ├── close_clears_pmcc_test │ ├── context_switch │ ├── copy_first_unaligned ... │ ├── settings ... │ └── wild_bctr └── run_kselftest.sh All the powerpc tests are squashed into the single powerpc directory. In particular, note that there is a single `settings` file, even though there are multiple settings files in the powerpc selftest sources. One of the settings files ends up installed, depending on install order, even if they have different contents. Similarly if there were two tests with the same name in different sub-directories they would clobber each other. Fix it by replicating the directory structure of the source tree into the install directory. The result being for example: $ tree tools/testing/selftests/kselftest_install tools/testing/selftests/kselftest_install ├── kselftest │ ├── ktap_helpers.sh │ ├── module.sh │ ├── prefix.pl │ └── runner.sh ├── kselftest-list.txt ├── powerpc │ ├── alignment │ │ ├── alignment_handler │ │ └── copy_first_unaligned │ ├── benchmarks │ │ ├── context_switch │ │ ├── exec_target │ │ ├── fork │ │ ├── futex_bench │ │ ├── gettimeofday │ │ ├── mmap_bench │ │ ├── null_syscall │ │ └── settings ... │ ├── eeh │ │ ├── eeh-basic.sh │ │ ├── eeh-functions.sh │ │ └── settings ... │ └── vphn │ └── test-vphn └── run_kselftest.sh Note multiple settings files in different sub-directories. This change also has the effect of changing the names of the tests from the point of view of the kselftest runner. Before the tests are named eg: powerpc:copy_first_unaligned powerpc:cache_shape powerpc:reg_access_test After, the test collection names include the sub-directory: powerpc/alignment:copy_first_unaligned powerpc/cache_shape:cache_shape powerpc/pmu/ebb:reg_access_test That means whereas previously all powerpc tests could be run with: $ ./run_kselftest.sh -c powerpc After the change it's necessary to pass a regex that matches all powerpc entries, eg: $ ./run_kselftest.sh -c "powerpc.*" The latter form also works before and after the change. Signed-off-by: Michael Ellerman Link: https://msgid.link/20240422133453.1793988-2-mpe@ellerman.id.au

selftests/powerpc: make sub-folders buildable on their own

2024-04-29T13:54:42+00:00

Build breaks when executing make with run_tests for sub-folders under powerpc. This is because, CFLAGS and GIT_VERSION macros are defined in Makefile of toplevel powerpc folder. make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/mm' gcc hugetlb_vs_thp_test.c ../harness.c ../utils.c -o /home/maddy/selftest_output//hugetlb_vs_thp_test hugetlb_vs_thp_test.c:6:10: fatal error: utils.h: No such file or directory 6 | #include "utils.h" | ^~~~~~~~~ compilation terminated. Fix this by adding the flags.mk in each sub-folder Makefile. Also remove the CFLAGS and GIT_VERSION macros from powerpc/ folder Makefile since the same is definied in flags.mk Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman Link: https://msgid.link/20240229093711.581230-3-maddy@linux.ibm.com

powerpc/selftests: Add test for papr-sysparm

2023-12-13T10:38:21+00:00

Consistently testing system parameter access is a bit difficult by nature -- the set of parameters available depends on the model and system configuration, and updating a parameter should be considered a destructive operation reserved for the admin. So we validate some of the error paths and retrieve the SPLPAR characteristics string, but not much else. Signed-off-by: Nathan Lynch Signed-off-by: Michael Ellerman Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-13-e9eafd0c8c6c@linux.ibm.com

powerpc/selftests: Add test for papr-vpd

2023-12-13T10:38:21+00:00

Add selftests for /dev/papr-vpd, exercising the common expected use cases: * Retrieve all VPD by passing an empty location code. * Retrieve the "system VPD" by passing a location code derived from DT root node properties, as done by the vpdupdate command. The tests also verify that certain intended properties of the driver hold: * Passing an unterminated location code to PAPR_VPD_CREATE_HANDLE gets EINVAL. * Passing a NULL location code pointer to PAPR_VPD_CREATE_HANDLE gets EFAULT. * Closing the device node without first issuing a PAPR_VPD_CREATE_HANDLE command to it succeeds. * Releasing a handle without first consuming any data from it succeeds. * Re-reading the contents of a handle returns the same data as the first time. Some minimal validation of the returned data is performed. The tests are skipped on systems where the papr-vpd driver does not initialize, making this useful only on PowerVM LPARs at this point. Signed-off-by: Nathan Lynch Signed-off-by: Michael Ellerman Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-12-e9eafd0c8c6c@linux.ibm.com

selftests/powerpc: Fix emit_tests to work with run_kselftest.sh

2023-09-22T10:29:48+00:00

In order to use run_kselftest.sh the list of tests must be emitted to populate kselftest-list.txt. The powerpc Makefile is written to use EMIT_TESTS. But support for EMIT_TESTS was dropped in commit d4e59a536f50 ("selftests: Use runner.sh for emit targets"). Although prior to that commit a548de0fe8e1 ("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had already broken run_kselftest.sh for powerpc due to the executable check using the wrong path. It can be fixed by replacing the EMIT_TESTS definitions with actual emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh able to run powerpc tests: $ cd linux $ export ARCH=powerpc $ export CROSS_COMPILE=powerpc64le-linux-gnu- $ make headers $ make -j -C tools/testing/selftests install $ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt 182 Fixes: d4e59a536f50 ("selftests: Use runner.sh for emit targets") Signed-off-by: Michael Ellerman Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au

selftests/powerpc/dexcr: Add hashst/hashchk test

2023-06-19T07:36:28+00:00

Test the kernel DEXCR[NPHIE] interface and hashchk exception handling. Introduces with it a DEXCR utils library for common DEXCR operations. Volatile is used to prevent the compiler optimising away the signal tests. Signed-off-by: Benjamin Gray Signed-off-by: Michael Ellerman Link: https://msgid.link/20230616034846.311705-11-bgray@linux.ibm.com

selftests/powerpc: Pass make context to children

2023-03-30T12:35:43+00:00

Make supports passing the 'jobserver' (parallel make support) to child invocations of make when either 1. The target command uses $(MAKE) directly 2. The command starts with '+' This context is not passed through expansions that result in $(MAKE), so the macros used in several places fail to pass on the jobserver context. Warnings are also raised by the child mentioning this. Prepend macros lines that invoke $(MAKE) with '+' to allow passing the jobserver context to these children. Signed-off-by: Benjamin Gray Signed-off-by: Michael Ellerman Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com

selftest/powerpc: Add PAPR sysfs attributes sniff test

2022-03-07T13:05:00+00:00

Include a testcase to check if the sysfs files for energy and frequency related have its related attribute files exist and populated Signed-off-by: Pratik R. Sampat Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220217105321.52941-3-psampat@linux.ibm.com

selftests/powerpc: Add test for real address error handling

2022-03-07T13:04:59+00:00

Add test for real address or control memory address access error handling, using NX-GZIP engine. The error is injected by accessing the control memory address using illegal instruction, on successful handling the process attempting to access control memory address using illegal instruction receives SIGBUS. Signed-off-by: Ganesh Goudar Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220107141428.67862-2-ganeshgr@linux.ibm.com

selftests/powerpc: Add NX-GZIP engine compress testcase

2020-04-21T12:51:34+00:00

Add a compression testcase for the powerpc NX-GZIP engine. Signed-off-by: Bulent Abali Signed-off-by: Raphael Moreira Zinsly Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200420205538.25181-4-rzinsly@linux.ibm.com