kernel/linux.git/tools/testing/selftests/net, branch v6.12.94

selftests: mptcp: add test for extra_subflows underflow on userspace PM

2026-06-19T11:42:30+00:00

commit 06fd2bec7aebf393288e4b78924482fe170caabc upstream. Add a test to verify that when userspace PM fails to create a subflow (e.g. using an unreachable address), the extra_subflows counter is not decremented below zero. Fixes: 77e4b94a3de6 ("mptcp: update userspace pm infos") Cc: stable@vger.kernel.org Signed-off-by: Tao Cui Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-6-856831229976@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: drop nanoseconds width specifier

2026-06-09T10:26:03+00:00

[ Upstream commit 01ff78e4b3d98689184c52d97f9575dfbdc3b10f ] Using the format specifier +%s%3N with GNU date is honoured, and only prints 3 digits of the nanoseconds portion of the seconds since epoch, which corresponds to the milliseconds. The uutils implementation of date currently does not honour this, and always prints all 9 digits. This is a known issue [1], but can be worked around by adapting this test to use nanoseconds instead of microseconds, and then divide it by 1e6. This fix is similar to what has been done on systemd side [2], and it is needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0. Note that the Fixes tag is there even if this patch doesn't fix an issue in the kernel selftests, but it is useful for those using uutils 0.8.0. Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Link: https://github.com/uutils/coreutils/issues/11658 [1] Link: https://github.com/systemd/systemd/pull/41627 [2] Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni [ kept `timeout ${timeout_test}` wrapper in do_transfer() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

selftests: netfilter: nft_tproxy.sh: adjust to socat changes

2026-05-23T11:04:25+00:00

[ Upstream commit 61119542663cac70898aef532eb57ee41ea9b477 ] Like e65d8b6f3092 ("selftests: drv-net: adjust to socat changes") we need to add shut-none for this test too. The extra 0-packet can trigger a second (unexpected) reply from the server. Fixes: 7e37e0eacd22 ("selftests: netfilter: nft_tproxy.sh: add tcp tests") Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20260408152432.24b8ad0d@kernel.org/ Suggested-by: Jakub Kicinski Signed-off-by: Florian Westphal Link: https://patch.msgid.link/20260409224506.27072-1-fw@strlen.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl

2026-05-14T13:29:26+00:00

commit 53705ddfa18408f8e1f064331b6387509fa19f7f upstream. When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of 'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only been added to 'pm_nl_ctl' for this specific check: to ensure that the kernel ignores such unsupported flag. No reason to add this flag to 'ip mptcp'. Then, this check should be skipped when 'ip mptcp' is used. Fixes: 0cef6fcac24d ("selftests: mptcp: ip_mptcp option for more scripts") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-11-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: check output: catch cmd errors

2026-05-14T13:29:26+00:00

commit 65db7b27b90e2ea8d4966935aa9a50b6a60c31ac upstream. Using '${?}' inside the if-statement to check the returned value from the command that was evaluated as part of the if-statement is not correct: here, '${?}' will be linked to the previous instruction, not the one that is expected here (${cmd}). Instead, simply mark the error, except if an error is expected. If that's the case, 1 can be passed as the 4th argument of this helper. Three checks from pm_netlink.sh expect an error. While at it, improve the error message when the command unexpectedly fails or succeeds. Note that we could expect a specific returned value, but the checks currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl', and these two tools don't return the same error code. Fixes: 2d0c1d27ea4e ("selftests: mptcp: add mptcp_lib_check_output helper") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-10-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: net: bridge_vlan_mcast: wait for h1 before querier check

2026-04-22T11:18:53+00:00

[ Upstream commit efaa71faf212324ecbf6d5339e9717fe53254f58 ] The querier-interval test adds h1 (currently a slave of the VRF created by simple_if_init) to a temporary bridge br1 acting as an outside IGMP querier. The kernel VRF driver (drivers/net/vrf.c) calls cycle_netdev() on every slave add and remove, toggling the interface admin-down then up. Phylink takes the PHY down during the admin-down half of that cycle. Since h1 and swp1 are cable-connected, swp1 also loses its link may need several seconds to re-negotiate. Use setup_wait_dev $h1 0 which waits for h1 to return to UP state, so the test can rely on the link being back up at this point. Fixes: 4d8610ee8bd77 ("selftests: net: bridge: add vlan mcast_querier_interval tests") Signed-off-by: Daniel Golle Reviewed-by: Alexander Sverdlin Link: https://patch.msgid.link/c830f130860fd2efae08bfb9e5b25fd028e58ce5.1775424423.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mptcp: join: check RM_ADDR not sent over same subflow

2026-03-25T10:08:41+00:00

[ Upstream commit 560edd99b5f58b2d4bbe3c8e51e1eed68d887b0e ] This validates the previous commit: RM_ADDR were sent over the first found active subflow which could be the same as the one being removed. It is more likely to loose this notification. For this check, RM_ADDR are explicitly dropped when trying to send them over the initial subflow, when removing the endpoint attached to it. If it is dropped, the test will complain because some RM_ADDR have not been received. Note that only the RM_ADDR are dropped, to allow the linked subflow to be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte code is used. If the IPTables commands fail, that's OK, the tests will continue to pass, but not validate this part. This can be ignored: another subtest fully depends on such command, and will be marked as skipped. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 8dd5efb1f91b ("mptcp: send ack for rm_addr") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: add a check for 'add_addr_accepted'

2026-03-25T10:08:41+00:00

[ Upstream commit 0eee0fdf9b7b0baf698f9b426384aa9714d76a51 ] The previous patch fixed an issue with the 'add_addr_accepted' counter. This was not spot by the test suite. Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add signal' test. This should help spotting similar regressions later on. These counters are crucial for ensuring the MPTCP path manager correctly handles the subflow creation via 'ADD_ADDR'. Signed-off-by: Gang Yan Reviewed-by: Geliang Tang Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Stable-dep-of: 560edd99b5f5 ("selftests: mptcp: join: check RM_ADDR not sent over same subflow") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: join: check removing signal+subflow endp

2026-03-13T16:20:36+00:00

commit 1777f349ff41b62dfe27454b69c27b0bc99ffca5 upstream. This validates the previous commit: endpoints with both the signal and subflow flags should always be marked as used even if it was not possible to create new subflows due to the MPTCP PM limits. For this test, an extra endpoint is created with both the signal and the subflow flags, and limits are set not to create extra subflows. In this case, an ADD_ADDR is sent, but no subflows are created. Still, the local endpoint is marked as used, and no warning is fired when removing the endpoint, after having sent a RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 85df533a787b ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: more stable simult_flows tests

2026-03-13T16:20:36+00:00

commit 8c09412e584d9bcc0e71d758ec1008d1c8d1a326 upstream. By default, the netem qdisc can keep up to 1000 packets under its belly to deal with the configured rate and delay. The simult flows test-case simulates very low speed links, to avoid problems due to slow CPUs and the TCP stack tend to transmit at a slightly higher rate than the (virtual) link constraints. All the above causes a relatively large amount of packets being enqueued in the netem qdiscs - the longer the transfer, the longer the queue - producing increasingly high TCP RTT samples and consequently increasingly larger receive buffer size due to DRS. When the receive buffer size becomes considerably larger than the needed size, the tests results can flake, i.e. because minimal inaccuracy in the pacing rate can lead to a single subflow usage towards the end of the connection for a considerable amount of data. Address the issue explicitly setting netem limits suitable for the configured link speeds and unflake all the affected tests. Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman