kernel/linux.git/tools/testing/selftests/net, branch v6.1.186

selftests: mptcp: join: mark tests with data corruption as failed

2026-08-23T12:18:17+00:00

commit ca318e7bbb7723f57bcd9e69a2873b5884435552 upstream. check_transfer() compares the input and output files byte-by-byte using `cmp -l "$in" "$out" | while read ...`. Because the while-loop body runs in a subshell (the script sets neither lastpipe nor pipefail), the fail_test call inside it -- which sets the global ret/last_test_failed -- and the `return 1` both act on the subshell, not on check_transfer(). check_transfer() thus always falls through to `return 0`, and any data corruption affecting only the payload (leaving the subflow/PM counters untouched) is silently reported as PASS. Fixes: 8117dac3e7c3 ("selftests: mptcp: add invert check in check_transfer") Cc: stable@vger.kernel.org Signed-off-by: Gang Yan Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-5-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: openvswitch: add config file

2026-08-19T15:16:01+00:00

[ Upstream commit 441a820ccef9af80a9ac5a4c85b9c396e595967c ] The kselftests doc mentions that a config file should be present "if a test needs specific kernel config options enabled". This selftest requires some kernel config, but no config file was provided. We could say that a sub-target could use the parent's config file, but the kselftests doc doesn't mention anything about that. Plus the net/openvswitch target is the only net target without a config file. Here is a new config file, which is a trimmed version of the net one, with hopefully the minimal required kconfig on top of 'make defconfig'. The Fixes tag points to the introduction of the net/openvswitch target, just to help validating this target on stable kernels. Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite") Signed-off-by: Matthieu Baerts (NGI0) Reviewed-by: Eelco Chaudron Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-2-a2915c294ef5@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: af_unix: add USER_NS config

2026-08-19T15:16:00+00:00

[ Upstream commit f8b1abed736111f914b2c567d9a3db1f71e788e8 ] This is required to use unshare(CLONE_NEWUSER). This has not been seen on NIPA before, because the 'af_unix' tests are executed with the 'net' ones, merging their config files. USER_NS is present in tools/testing/selftests/net/config. This issue is visible when only the af_unix config is used on top of the default one. This is the recommended way to execute selftest targets. Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Signed-off-by: Matthieu Baerts (NGI0) Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-1-a2915c294ef5@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftest: af_unix: Add Kconfig file.

2026-08-19T15:16:00+00:00

[ Upstream commit 11b006d6896c0471ad29c6f1fb1af606e7ba278f ] diag_uid selftest failed on NIPA where the received nlmsg_type is NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default and sock_diag_lock_handler() failed to load the module. # # Starting 2 tests from 2 test cases. # # RUN diag_uid.uid.1 ... # # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20) # # 1: Test terminated by assertion # # FAIL diag_uid.uid.1 # not ok 1 diag_uid.uid.1 Let's add all AF_UNIX Kconfig to the config file under af_unix dir so that NIPA consumes it. Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/104-diag-uid/stdout [0] Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/config [1] Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20240617073033.0cbb829d@kernel.org/ Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Stable-dep-of: f8b1abed7361 ("selftests: af_unix: add USER_NS config") Signed-off-by: Sasha Levin

selftests: mptcp: drop nanoseconds width specifier

2026-06-19T11:37:26+00:00

[ Upstream commit 01ff78e4b3d98689184c52d97f9575dfbdc3b10f ] Using the format specifier +%s%3N with GNU date is honoured, and only prints 3 digits of the nanoseconds portion of the seconds since epoch, which corresponds to the milliseconds. The uutils implementation of date currently does not honour this, and always prints all 9 digits. This is a known issue [1], but can be worked around by adapting this test to use nanoseconds instead of microseconds, and then divide it by 1e6. This fix is similar to what has been done on systemd side [2], and it is needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0. Note that the Fixes tag is there even if this patch doesn't fix an issue in the kernel selftests, but it is useful for those using uutils 0.8.0. Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Link: https://github.com/uutils/coreutils/issues/11658 [1] Link: https://github.com/systemd/systemd/pull/41627 [2] Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: lib: Add helpers for checksum handling

2026-06-19T11:36:56+00:00

commit 952e0ee38c7215c45192d8c899acd1830873f28b upstream. In order to generate IGMPv3 and MLDv2 packets on the fly, we will need helpers to calculate the packet checksum. The approach presented in this patch revolves around payload templates for mausezahn. These are mausezahn-like payload strings (01:23:45:...) with possibly one 2-byte sequence replaced with the word PAYLOAD. The main function is payload_template_calc_checksum(), which calculates RFC 1071 checksum of the message. There are further helpers to then convert the checksum to the payload format, and to expand it. For IPv6, MLDv2 message checksum is computed using a pseudoheader that differs from the header used in the payload itself. The fact that the two messages are different means that the checksum needs to be returned as a separate quantity, instead of being expanded in-place in the payload itself. Furthermore, the pseudoheader includes a length of the message. Much like the checksum, this needs to be expanded in mausezahn format. And likewise for number of addresses for (S,G) entries. Thus we have several places where a computed quantity needs to be presented in the payload format. Add a helper u16_to_bytes(), which will be used in all these cases. Signed-off-by: Petr Machata Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: 02cb2e6bacbb ("selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter enabled") [bwh: Backported to 6,1: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Sasha Levin

selftests: net: bridge_vlan_mcast: wait for h1 before querier check

2026-06-01T15:38:34+00:00

[ Upstream commit efaa71faf212324ecbf6d5339e9717fe53254f58 ] The querier-interval test adds h1 (currently a slave of the VRF created by simple_if_init) to a temporary bridge br1 acting as an outside IGMP querier. The kernel VRF driver (drivers/net/vrf.c) calls cycle_netdev() on every slave add and remove, toggling the interface admin-down then up. Phylink takes the PHY down during the admin-down half of that cycle. Since h1 and swp1 are cable-connected, swp1 also loses its link may need several seconds to re-negotiate. Use setup_wait_dev $h1 0 which waits for h1 to return to UP state, so the test can rely on the link being back up at this point. Fixes: 4d8610ee8bd77 ("selftests: net: bridge: add vlan mcast_querier_interval tests") Signed-off-by: Daniel Golle Reviewed-by: Alexander Sverdlin Link: https://patch.msgid.link/c830f130860fd2efae08bfb9e5b25fd028e58ce5.1775424423.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mptcp: join: check removing signal+subflow endp

2026-04-11T12:16:38+00:00

commit 1777f349ff41b62dfe27454b69c27b0bc99ffca5 upstream. This validates the previous commit: endpoints with both the signal and subflow flags should always be marked as used even if it was not possible to create new subflows due to the MPTCP PM limits. For this test, an extra endpoint is created with both the signal and the subflow flags, and limits are set not to create extra subflows. In this case, an ADD_ADDR is sent, but no subflows are created. Still, the local endpoint is marked as used, and no warning is fired when removing the endpoint, after having sent a RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 85df533a787b ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski [ No conflicts, but in this kernel version 'run_tests' doesn't support parameters set via env vars: positional parameters need to be used. See commit 595ef566a2ef ("selftests: mptcp: drop addr_nr_ns1/2 parameters") and commit e571fb09c893 ("selftests: mptcp: add speed env var") which are not in this kernel version. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: join: implicit: stop transfer after last check

2026-04-11T12:16:38+00:00

With this kernel version, the 'implicit EP' MPTCP Join selftest ended with an error message: 115 implicit EP creation[ ok ] ID change is prevented[ ok ] modif is allowed[ ok ] TcpPassiveOpens 2 0.0 TcpEstabResets 2 0.0 TcpInSegs 315 0.0 TcpOutSegs 617 0.0 TcpOutRsts 1 0.0 TcpExtDelayedACKs 289 0.0 TcpExtTCPPureAcks 6 0.0 TcpExtTCPOrigDataSent 306 0.0 TcpExtTCPDelivered 306 0.0 MPTcpExtMPCapableSYNRX 1 0.0 MPTcpExtMPCapableACKRX 1 0.0 MPTcpExtMPJoinSynRx 1 0.0 MPTcpExtMPJoinAckRx 1 0.0 MPTcpExtAddAddr 1 0.0 MPTcpExtEchoAdd 1 0.0 MPTcpExtMPFastcloseTx 1 0.0 MPTcpExtMPRstTx 1 0.0 MPTcpExtMPRstRx 1 0.0 TcpActiveOpens 2 0.0 TcpEstabResets 2 0.0 TcpInSegs 617 0.0 TcpOutSegs 315 0.0 TcpOutRsts 1 0.0 TcpExtTCPPureAcks 308 0.0 TcpExtTCPOrigDataSent 306 0.0 TcpExtTCPDelivered 307 0.0 MPTcpExtMPCapableSYNTX 1 0.0 MPTcpExtMPCapableSYNACKRX 1 0.0 MPTcpExtMPJoinSynAckRx 1 0.0 MPTcpExtAddAddr 1 0.0 MPTcpExtEchoAdd 1 0.0 MPTcpExtMPFastcloseRx 1 0.0 MPTcpExtMPRstTx 1 0.0 MPTcpExtMPRstRx 1 0.0 MPTcpExtRcvWndShared 1 0.0 That's because the test was waiting for the end of the transfer for no reasons, which ended after a timeout with an error. In this case, the stats were displayed, but this error was ignored: the end of transfer is not validated in this test. To fix that, stop the transfer after the last check, similar to what is done in the other tests. Fixes: 699879d5f866 ("selftests: mptcp: join: endpoints: longer transfer") Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

Revert "selftests: net: amt: wait longer for connection before sending packets"

2026-03-25T10:03:25+00:00

This reverts commit 7724036d4804222007689cd69f248347eb154793 which is commit 04708606fd7bdc34b69089a4ff848ff36d7088f9 upstream. The reverted patch introduced dependency on lib.sh under net selftests. The file was introduced in v6.8-rc1 via commit 25ae948b4478 ("selftests/net: add lib.sh"). Without lib.sh, the amt test fails with: ./amt.sh: line 76: source: lib.sh: file not found The whole history of lib.sh includes about 50 commits and considering the file never landed on 6.1 it may be better to not introduce it. Signed-off-by: Nathan Gao Acked-by: Taehee Yoo Signed-off-by: Greg Kroah-Hartman