kernel/linux.git/tools/testing/selftests/net, branch v4.9.166

bpf: do not blindly change rlimit in reuseport net selftest

2018-11-13T19:16:47+00:00

[ Upstream commit 262f9d811c7608f1e74258ceecfe1fa213bdf912 ] If the current process has unlimited RLIMIT_MEMLOCK, we should should leave it as is. Fixes: 941ff6f11c02 ("bpf: fix rlimit in reuseport net selftest") Signed-off-by: John Sperbeck Signed-off-by: Eric Dumazet Acked-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

selftests/net: fixes psock_fanout eBPF test case

2018-05-30T05:50:50+00:00

[ Upstream commit ddd0010392d9cbcb95b53d11b7cafc67b373ab56 ] eBPF test fails due to verifier failure because log_buf is too small. Fixed by increasing log_buf size Signed-off-by: Prashant Bhole Acked-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bpf: fix rlimit in reuseport net selftest

2018-05-30T05:50:26+00:00

[ Upstream commit 941ff6f11c020913f5cddf543a9ec63475d7c082 ] Fix two issues in the reuseport_bpf selftests that were reported by Linaro CI: [...] + ./reuseport_bpf ---- IPv4 UDP ---- Testing EBPF mod 10... Reprograming, testing mod 5... ./reuseport_bpf: ebpf error. log: 0: (bf) r6 = r1 1: (20) r0 = *(u32 *)skb[0] 2: (97) r0 %= 10 3: (95) exit processed 4 insns : Operation not permitted + echo FAIL [...] ---- IPv4 TCP ---- Testing EBPF mod 10... ./reuseport_bpf: failed to bind send socket: Address already in use + echo FAIL [...] For the former adjust rlimit since this was the cause of failure for loading the BPF prog, and for the latter add SO_REUSEADDR. Reported-by: Naresh Kamboju Link: https://bugs.linaro.org/show_bug.cgi?id=3502 Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

selftests: do not require bash to run netsocktests testcase

2017-01-19T19:17:58+00:00

commit 3659f98b5375d195f1870c3e508fe51e52206839 upstream. Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by: Rolf Eike Beer Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

soreuseport: Fix reuseport_bpf testcase on 32bit architectures

2016-06-06T22:20:16+00:00

This fixes the following compiler warnings when compiling the reuseport_bpf testcase on a 32 bit platform: reuseport_bpf.c: In function ‘attach_ebpf’: reuseport_bpf.c:114:15: warning: cast from pointer to integer of ifferent size [-Wpointer-to-int-cast] Signed-off-by: Helge Deller Signed-off-by: David S. Miller

soreuseport: test mixed v4/v6 sockets

2016-04-15T01:14:04+00:00

Test to validate the behavior of SO_REUSEPORT sockets that are created with both AF_INET and AF_INET6. See the commit prior to this for a description of this behavior. Signed-off-by: Craig Gallek Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2016-03-19T17:05:34+00:00

Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...

selftests: create test-specific kconfig fragments

2016-02-25T16:47:52+00:00

Create the config file in each directory of testcase which need more kernel configuration than the default defconfig. User could use these configs with merge_config.sh script: Enable config for specific testcase: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/xxx/config Enable configs for all testcases: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/*/config Signed-off-by: Bamvor Jian Zhang Reviewed-by: Shuah Khan Signed-off-by: Shuah Khan

soreuseport: BPF selection functional test for TCP

2016-02-11T08:54:15+00:00

Unfortunately the existing test relied on packet payload in order to map incoming packets to sockets. In order to get this to work with TCP, TCP_FASTOPEN needed to be used. Since the fast open path is slightly different than the standard TCP path, I created a second test which sends to reuseport group members based on receiving cpu core id. This will probably serve as a better real-world example use as well. Signed-off-by: Craig Gallek Signed-off-by: David S. Miller

soreuseport: pass skb to secondary UDP socket lookup

2016-01-06T06:28:04+00:00

This socket-lookup path did not pass along the skb in question in my original BPF-based socket selection patch. The skb in the udpN_lib_lookup2 path can be used for BPF-based socket selection just like it is in the 'traditional' udpN_lib_lookup path. udpN_lib_lookup2 kicks in when there are greater than 10 sockets in the same hlist slot. Coincidentally, I chose 10 sockets per reuseport group in my functional test, so the lookup2 path was not excersised. This adds an additional set of tests with 20 sockets. Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test") Suggested-by: Eric Dumazet Signed-off-by: Craig Gallek Acked-by: Eric Dumazet Signed-off-by: David S. Miller