kernel/linux.git/tools/testing/selftests/net, branch v4.19.237

selftests/net: udpgso_bench_tx: fix dst ip argument

2022-01-05T11:34:59+00:00

[ Upstream commit 9c1952aeaa98b3cfc49e2a79cb2c7d6a674213e9 ] udpgso_bench_tx call setup_sockaddr() for dest address before parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}", then ${dst_port} will be ignored, and using default cfg_port 8000. This will cause test case "multiple GRO socks" failed in udpgro.sh. Setup sockaddr after parsing all arguments. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Jianguo Wu Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: Calculate udpgso segment count without header adjustment

2022-01-05T11:34:58+00:00

[ Upstream commit 5471d5226c3b39b3d2f7011c082d5715795bd65c ] The below referenced commit correctly updated the computation of number of segments (gso_size) by using only the gso payload size and removing the header lengths. With this change the regression test started failing. Update the tests to match this new behavior. Both IPv4 and IPv6 tests are updated, as a separate patch in this series will update udp_v6_send_skb to match this change in udp_send_skb. Fixes: 158390e45612 ("udp: using datalen to cap max gso segments") Signed-off-by: Coco Li Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: forwarding: Fix race condition in mirror installation

2021-03-17T15:43:44+00:00

commit edcbf5137f093b5502f5f6b97cce3cbadbde27aa upstream. When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent, so that it is always valid. Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test") Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: net: fib_tests: remove duplicate log test

2021-01-27T10:05:39+00:00

[ Upstream commit fd23d2dc180fccfad4b27a8e52ba1bc415d18509 ] The previous test added an address with a specified metric and check if correspond route was created. I somehow added two logs for the same test. Remove the duplicated one. Reported-by: Antoine Tenart Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing") Signed-off-by: Hangbin Liu Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests/net: relax cpu affinity requirement in msg_zerocopy test

2020-08-11T13:32:35+00:00

[ Upstream commit 16f6458f2478b55e2b628797bc81a4455045c74e ] The msg_zerocopy test pins the sender and receiver threads to separate cores to reduce variance between runs. But it hardcodes the cores and skips core 0, so it fails on machines with the selected cores offline, or simply fewer cores. The test mainly gives code coverage in automated runs. The throughput of zerocopy ('-z') and non-zerocopy runs is logged for manual inspection. Continue even when sched_setaffinity fails. Just log to warn anyone interpreting the data. Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Reported-by: Colin Ian King Signed-off-by: Willem de Bruijn Acked-by: Colin Ian King Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests/net: psock_fanout: fix clang issues for target arch PowerPC

2020-08-05T08:06:02+00:00

[ Upstream commit 64f9ede2274980076423583683d44480909b7a40 ] Clang 9 threw: warning: format specifies type 'unsigned short' but the argument has \ type 'int' [-Wformat] typeflags, PORT_BASE, PORT_BASE + port_off); Tested: make -C tools/testing/selftests TARGETS="net" run_tests Fixes: 77f65ebdca50 ("packet: packet fanout rollover during socket overload") Signed-off-by: Tanner Love Acked-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests/net/fib_tests: update addr_metric_test for peer route testing

2020-03-18T06:14:17+00:00

[ Upstream commit 0d29169a708bf730ede287248e429d579f432d1d ] This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by: Hangbin Liu Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testing

2020-03-11T13:14:51+00:00

[ Upstream commit e8023b030ce1748930e2dc76353a262fe47d4745 ] For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu Reviewed-by: Petr Machata Tested-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ipv6: Fix route replacement with dev-only route

2020-03-05T15:42:16+00:00

[ Upstream commit e404b8c7cfb31654c9024d497cec58a501501692 ] After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: rtnetlink: add addresses with fixed life time

2020-01-09T09:19:08+00:00

[ Upstream commit 3cfa148826e3c666da1cc2a43fbe8689e2650636 ] This exercises kernel code path that deal with addresses that have a limited lifetime. Without previous fix, this triggers following crash on net-next: BUG: KASAN: null-ptr-deref in check_lifetime+0x403/0x670 Read of size 8 at addr 0000000000000010 by task kworker [..] Signed-off-by: Florian Westphal Signed-off-by: David S. Miller Signed-off-by: Sasha Levin