kernel/linux.git/tools/testing/selftests/net/rtnetlink.sh, branch v7.1

selftests: rtnetlink: Add bridge promiscuity tests

2026-05-28T00:23:05+00:00

Add two test cases that always pass, but trigger sleeping in atomic context BUGs without "bridge: Fix sleep in atomic context in netlink path" and "bridge: Fix sleep in atomic context in sysfs path". Reviewed-by: Nikolay Aleksandrov Signed-off-by: Ido Schimmel Link: https://patch.msgid.link/20260526064818.272516-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski

selftests: net: add team_bridge_macvlan rx_mode test

2026-04-21T10:50:25+00:00

Add a test that exercises the ndo_change_rx_flags path through a macvlan -> bridge -> team -> dummy stack. This triggers dev_uc_add under addr_list_lock which flips promiscuity on the lower device. With the new work queue approach, this must not deadlock. Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/ Reviewed-by: Breno Leitao Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20260416185712.2155425-15-sdf@fomichev.me Signed-off-by: Paolo Abeni

selftests: rtnetlink: add neighbour update test

2026-03-12T02:04:55+00:00

Check that protocol and flags are updated correctly for neighbour and pneigh entries. Signed-off-by: Sabrina Dubroca Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/d28f72b5b4ff4c9ecbbbde06146a938dcc4c264a.1772894876.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski

ipv6: clean up routes when manually removing address with a lifetime

2025-11-15T01:44:47+00:00

When an IPv6 address with a finite lifetime (configured with valid_lft and preferred_lft) is manually deleted, the kernel does not clean up the associated prefix route. This results in orphaned routes (marked "proto kernel") remaining in the routing table even after their corresponding address has been deleted. This is particularly problematic on networks using combination of SLAAC and bridges. 1. Machine comes up and performs RA on eth0. 2. User creates a bridge - does an ip -6 addr flush dev eth0; - adds the eth0 under the bridge. 3. SLAAC happens on br0. Even tho the address has "moved" to br0 there will still be a route pointing to eth0, but eth0 is not usable for IP any more. Reviewed-by: David Ahern Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20251113031700.3736285-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

selftests: net: check jq command is supported

2025-10-14T13:12:18+00:00

The jq command is used in vlan_bridge_binding.sh, if it is not supported, the test will spam the following log. # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # TEST: Test bridge_binding on->off when lower down [FAIL] # Got operstate of , expected 0 The rtnetlink.sh has the same problem. It makes sense to check if jq is installed before running these tests. After this patch, the vlan_bridge_binding.sh skipped if jq is not supported: # timeout set to 3600 # selftests: net: vlan_bridge_binding.sh # TEST: jq not installed [SKIP] Fixes: dca12e9ab760 ("selftests: net: Add a VLAN bridge binding selftest") Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test") Signed-off-by: Wang Liang Reviewed-by: Hangbin Liu Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com Signed-off-by: Paolo Abeni

selftests: rtnetlink: correct error message in rtnetlink.sh fou test

2025-09-23T23:55:05+00:00

The rtnetlink FOU selftest prints an incorrect string: "FAIL: fou"s. Change it to the intended "FAIL: fou" by removing a stray character in the end_test string of the test. Signed-off-by: Alok Tiwari Reviewed-by: Simon Horman Link: https://patch.msgid.link/20250921192111.1567498-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski

selftests: rtnetlink: skip tests if tools or feats are missing

2025-08-25T22:22:18+00:00

Some rtnetlink selftests assume the presence of ifconfig and iproute2 support for the `proto` keyword in `ip address` commands. These assumptions can cause test failures on modern systems (e.g. Debian Bookworm) where: - ifconfig is not installed by default - The iproute2 version lacks support for address protocol This patch improves test robustness by: - Skipping kci_test_promote_secondaries if ifconfig is missing - Skipping do_test_address_proto if ip address help does not mention proto These changes ensure the tests degrade gracefully by reporting SKIP instead of FAIL when prerequisites are not met, improving portability across systems. Reviewed-by: Hangbin Liu Signed-off-by: Alessandro Ratti Link: https://patch.msgid.link/20250822140633.891360-2-alessandro@0x65c.net Signed-off-by: Jakub Kicinski

selftests: rtnetlink: print device info on preferred_lft test failure

2025-08-21T02:28:08+00:00

Even with slowwait used to avoid system sleep in the preferred_lft test, failures can still occur after long runtimes. Print the device address info when the test fails to provide better troubleshooting data. Signed-off-by: Hangbin Liu Link: https://patch.msgid.link/20250819074749.388064-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski

selftests: rtnetlink.sh: remove esp4_offload after test

2025-07-26T18:26:47+00:00

The esp4_offload module, loaded during IPsec offload tests, should be reset to its default settings after testing. Otherwise, leaving it enabled could unintentionally affect subsequence test cases by keeping offload active. Without this fix: $ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload; PASS: ipsec_offload esp4_offload 12288 0 esp4 32768 1 esp4_offload With this fix: $ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload; PASS: ipsec_offload Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test") Signed-off-by: Xiumei Mu Reviewed-by: Shannon Nelson Reviewed-by: Hangbin Liu Link: https://patch.msgid.link/6d3a1d777c4de4eb0ca94ced9e77be8d48c5b12f.1753415428.git.xmu@redhat.com Signed-off-by: Jakub Kicinski

selftests: rtnetlink: add macsec and vlan nesting test

2025-07-25T18:03:47+00:00

Add reproducer for [0] with a dummy device. 0: https://lore.kernel.org/netdev/2aff4342b0f5b1539c02ffd8df4c7e58dd9746e7.camel@nvidia.com/ Reviewed-by: Simon Horman Tested-by: Simon Horman Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20250723224715.1341121-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski