kernel/linux.git/tools/testing/selftests/net/forwarding, branch linux-5.11.y

selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test

2021-05-19T08:29:36+00:00

[ Upstream commit 1233898ab758cbcf5f6fea10b8dd16a0b2c24fab ] The mirror_gre_scale test creates as many ERSPAN sessions as the underlying chip supports, and tests that they all work. In order to determine that it issues a stream of ICMP packets and checks if they are mirrored as expected. However, the mausezahn invocation missed the -6 flag to identify the use of IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to ICMP6. It also didn't pass an explicit source IP address, which apparently worked at some point in the past, but does not anymore. To fix these issues, extend the function mirror_test() in mirror_lib by detecting the IPv6 protocol addresses, and using a different ICMP scheme. Fix __mirror_gre_test() in the selftest itself to pass a source IP address. Signed-off-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static

2021-05-14T08:50:16+00:00

[ Upstream commit c8d0260cdd96fdccdef0509c4160e28a1012a5d7 ] The FDB roaming test installs a destination MAC address on the wrong interface of an FDB database and tests whether the mirroring fails, because packets are sent to the wrong port. The test by mistake installs the FDB entry as local. This worked previously, because drivers were notified of local FDB entries in the same way as of static entries. However that has been fixed in the commit 6ab4c3117aec ("net: bridge: don't notify switchdev for local FDB addresses"), and local entries are not notified anymore. As a result, the HW is not reconfigured for the FDB roam, and mirroring keeps working, failing the test. To fix the issue, mark the FDB entry as static. Fixes: 9c7c8a82442c ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests") Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

flow_dissector: fix TTL and TOS dissection on IPv4 fragments

2021-04-07T13:02:27+00:00

[ Upstream commit d2126838050ccd1dadf310ffb78b2204f3b032b9 ] the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ $tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop doesn't drop all IPv4 packets that match the configured TTL / destination address. In particular, if "fragment offset" or "more fragments" have non zero value in the IPv4 header, setting of FLOW_DISSECTOR_KEY_IP is simply ignored. Fix this dissecting IPv4 TTL and TOS before fragment info; while at it, add a selftest for tc flower's match on 'ip_ttl' that verifies the correct behavior. Fixes: 518d8a2e9bad ("net/flow_dissector: add support for dissection of misc ip header fields") Reported-by: Shuang Li Signed-off-by: Davide Caratti Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value

2021-03-30T12:30:24+00:00

[ Upstream commit 5aa3c334a449bab24519c4967f5ac2b3304c8dcf ] The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01 should be inner ECT(0) + outer ECT(1). Based on the description of __INET_ECN_decapsulate, the final decapsulate value should be ECT(1). So fix the test expect value to 0x01. Before the fix: TEST: VXLAN: ECN decap: 01/02->0x02 [FAIL] Expected to capture 10 packets, got 0. After the fix: TEST: VXLAN: ECN decap: 01/02->0x01 [ OK ] Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: Fix race condition in mirror installation

2021-03-17T16:11:26+00:00

commit edcbf5137f093b5502f5f6b97cce3cbadbde27aa upstream. When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent, so that it is always valid. Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test") Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: Specify interface when invoking mausezahn

2021-01-28T21:09:01+00:00

Specify the interface through which packets should be transmitted so that the test will pass regardless of the libnet version against which mausezahn is linked. Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects") Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops") Signed-off-by: Danielle Ratson Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski

selftests: forwarding: Add Q-in-VNI test

2020-12-08T23:45:57+00:00

Add test to check Q-in-VNI traffic. Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

selftests: forwarding: Add MPLS L2VPN test

2020-12-05T01:44:06+00:00

Connect hosts H1 and H2 using two intermediate encapsulation routers (LER1 and LER2). These routers encapsulate traffic from the hosts, including the original Ethernet header, into MPLS. Use ping to test reachability between H1 and H2. Signed-off-by: Guillaume Nault Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.com Signed-off-by: Jakub Kicinski

selftests: forwarding: Add blackhole nexthops tests

2020-11-24T20:14:56+00:00

Test that IPv4 and IPv6 ping fail when the route is using a blackhole nexthop or a group with a blackhole nexthop. Test that ping passes when the route starts using a valid nexthop. Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski

selftests: forwarding: Add multipath tunneling nexthop test

2020-11-20T23:20:21+00:00

Add a nexthop objects version of gre_multipath.sh. Unlike the original test, it also tests IPv6 overlay which is not possible with the legacy nexthop implementation. See commit 9a2ad3623868 ("selftests: forwarding: gre_multipath: Drop IPv6 tests") for more info. Signed-off-by: Ido Schimmel Signed-off-by: Jakub Kicinski