kernel/linux.git/tools/testing/selftests/net/forwarding/lib.sh, branch v6.6.23

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-08-10T21:10:53+00:00

Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski

selftests: forwarding: Add a helper to skip test when using veth pairs

2023-08-09T21:53:35+00:00

A handful of tests require physical loopbacks to be used instead of veth pairs. Add a helper that these tests will invoke in order to be skipped when executed with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Tested-by: Mirsad Todorovac Reviewed-by: Hangbin Liu Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com Signed-off-by: Jakub Kicinski

selftests: forwarding: Set default IPv6 traceroute utility

2023-08-09T21:53:35+00:00

The test uses the 'TROUTE6' environment variable to encode the name of the IPv6 traceroute utility. By default (without a configuration file), this variable is not set, resulting in failures: # ./ip6_forward_instats_vrf.sh TEST: ping6 [ OK ] TEST: Ip6InTooBigErrors [ OK ] TEST: Ip6InHdrErrors [FAIL] TEST: Ip6InAddrErrors [ OK ] TEST: Ip6InDiscards [ OK ] Fix by setting a default utility name and skip the test if the utility is not present. Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by: Mirsad Todorovac Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Tested-by: Mirsad Todorovac Reviewed-by: Hangbin Liu Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com Signed-off-by: Jakub Kicinski

selftests: forwarding: Skip test when no interfaces are specified

2023-08-09T21:53:34+00:00

As explained in [1], the forwarding selftests are meant to be run with either physical loopbacks or veth pairs. The interfaces are expected to be specified in a user-provided forwarding.config file or as command line arguments. By default, this file is not present and the tests fail: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # Command line is not complete. Try option "help" # Failed to create netif not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1 [...] Fix by skipping a test if interfaces are not provided either via the configuration file or command line arguments. # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # SKIP: Cannot create interface. Name not specified ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP [1] tools/testing/selftests/net/forwarding/README Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/ Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Tested-by: Mirsad Todorovac Reviewed-by: Hangbin Liu Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski

selftests: forwarding: lib: Add ping6_, ping_test_fails()

2023-07-14T09:20:15+00:00

Add two helpers to run a ping test that succeeds when the pings themselves fail. Signed-off-by: Petr Machata Reviewed-by: Danielle Ratson Signed-off-by: David S. Miller

selftests: forwarding: lib: add netns support for tc rule handle stats get

2023-05-10T08:27:20+00:00

When run the test in netns, it's not easy to get the tc stats via tc_rule_handle_stats_get(). With the new netns parameter, we can get stats from specific netns like num=$(tc_rule_handle_stats_get "dev eth0 ingress" 101 ".packets" "-n ns") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller

selftests: forwarding: add a test for MAC Merge layer

2023-04-21T03:03:21+00:00

The MAC Merge layer (IEEE 802.3-2018 clause 99) does all the heavy lifting for Frame Preemption (IEEE 802.1Q-2018 clause 6.7.2), a TSN feature for minimizing latency. Preemptible traffic is different on the wire from normal traffic in incompatible ways. If we send a preemptible packet and the link partner doesn't support preemption, it will drop it as an error frame and we will never know. The MAC Merge layer has a control plane of its own, which can be manipulated (using ethtool) in order to negotiate this capability with the link partner (through LLDP). Actually the TLV format for LLDP solves this problem only partly, because both partners only advertise: - if they support preemption (RX and TX) - if they have enabled preemption (TX) so we cannot tell the link partner what to do - we cannot force it to enable reception of our preemptible packets. That is fully solved by the verification feature, where the local device generates some small probe frames which look like preemptible frames with no useful content, and the link partner is obliged to respond to them if it supports the standard. If the verification times out, we know that preemption isn't active in our TX direction on the link. Having clarified the definition, this selftest exercises the manual (ethtool) configuration path of 2 link partners (with and without verification), and the LLDP code path, using the openlldp project. The test also verifies the TX activity of the MAC Merge layer by sending traffic through a traffic class configured as preemptible (using mqprio). There isn't a good way to make this really portable (user space cannot find out how many traffic classes there are for a device), but I chose num_tc 4 here, that should work reasonably well. I also know that some devices (stmmac) only permit TXQ0 to be preemptible, so this is why PREEMPTIBLE_PRIO was strategically chosen as 0. Even if other hardware is more configurable, this test should cover the baseline. This is not really a "forwarding" selftest, but I put it near the other "ethtool" selftests. $ ./ethtool_mm.sh eno0 swp0 TEST: Manual configuration with verification: eno0 to swp0 [ OK ] TEST: Manual configuration with verification: swp0 to eno0 [ OK ] TEST: Manual configuration without verification: eno0 to swp0 [ OK ] TEST: Manual configuration without verification: swp0 to eno0 [ OK ] TEST: Manual configuration with failed verification: eno0 to swp0 [ OK ] TEST: Manual configuration with failed verification: swp0 to eno0 [ OK ] TEST: LLDP [ OK ] Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

selftests: forwarding: introduce helper for standard ethtool counters

2023-04-21T03:03:21+00:00

Counters for the MAC Merge layer and preemptible MAC have standardized so far on using structured ethtool stats as opposed to the driver specific names and meanings. Benefit from that rare opportunity and introduce a helper to lib.sh for querying standardized counters, in the hope that these will take off for other uses as well. Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

selftests: forwarding: generalize bail_on_lldpad from mlxsw

2023-04-21T03:03:21+00:00

mlxsw selftests often invoke a bail_on_lldpad() helper to make sure LLDPAD is not running, to prevent conflicts between the QoS configuration applied through TC or DCB command line tool, and the DCB configuration that LLDPAD might apply. This helper might be useful to others. Move the function to lib.sh, and parameterize to make reusable in other contexts. Signed-off-by: Petr Machata Reviewed-by: Danielle Ratson Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-02-09T20:25:40+00:00

net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski