kernel/linux.git/tools/testing/selftests/lib.mk, branch v5.10.258

selftests: lib.mk: Also install "config" and "settings"

2026-06-01T15:29:49+00:00

[ Upstream commit de53fa9baa701963722e9fa3d0fe34b897104497 ] Installed seccomp tests would time out because the "settings" file was missing. Install both "settings" (needed for proper test execution) and "config" (needed for informational purposes) with the other test targets. Signed-off-by: Kees Cook Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: Use optional USERCFLAGS and USERLDFLAGS

2023-01-14T09:16:31+00:00

commit de3ee3f63400a23954e7c1ad1cb8c20f29ab6fe3 upstream. This change enables to extend CFLAGS and LDFLAGS from command line, e.g. to extend compiler checks: make USERCFLAGS=-Werror USERLDFLAGS=-static USERCFLAGS and USERLDFLAGS are documented in Documentation/kbuild/makefiles.rst and Documentation/kbuild/kbuild.rst This should be backported (down to 5.10) to improve previous kernel versions testing as well. Cc: Shuah Khan Cc: stable@vger.kernel.org Signed-off-by: Mickaël Salaün Link: https://lore.kernel.org/r/20220909103901.1503436-1-mic@digikod.net Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

selftests: be sure to make khdr before other targets

2021-10-09T12:40:57+00:00

[ Upstream commit 8914a7a247e065438a0ec86a58c1c359223d2c9e ] LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’? Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors. Here we mark target khdr as NOTPARALLEL to make it be always built first. CC: Philip Li Reported-by: kernel test robot Signed-off-by: Li Zhijian Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: Set CC to clang in lib.mk if LLVM is set

2021-05-19T08:12:56+00:00

[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ] selftests/bpf/Makefile includes lib.mk. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed lib.mk issue which sets CC to gcc in all cases. Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com Signed-off-by: Sasha Levin

selftests: fix prepending $(OUTPUT) to $(TEST_PROGS)

2021-05-14T07:50:24+00:00

[ Upstream commit cb4969e6f9f5ee12521aec764fa3d4bbd91bc797 ] Currently the following command produces an error message: linux# make kselftest TARGETS=bpf O=/mnt/linux-build # selftests: bpf: test_libbpf.sh # ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory # test_libbpf: failed at file test_l4lb.o # selftests: test_libbpf [FAILED] The error message might not affect the return code of make, therefore one needs to grep make output in order to detect it. This is not the only instance of the same underlying problem; any test with more than one element in $(TEST_PROGS) fails the same way. Another example: linux# make O=/mnt/linux-build TARGETS=splice kselftest [...] # ./short_splice_read.sh: 15: ./splice_read: not found # FAIL: /sys/module/test_module/sections/.init.text 2 not ok 2 selftests: splice: short_splice_read.sh # exit=1 The current logic prepends $(OUTPUT) only to the first member of $(TEST_PROGS). After that, run_one() does cd `dirname $TEST` For all tests except the first one, `dirname $TEST` is ., which means they cannot access the files generated in $(OUTPUT). Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of $(TEST_PROGS). Fixes: 1a940687e424 ("selftests: lib.mk: copy test scripts and test files for make O=dir run") Signed-off-by: Ilya Leoshkevich Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: filter kselftest headers from command in lib.mk

2020-10-27T22:51:06+00:00

Commit 1056d3d2c97e ("selftests: enforce local header dependency in lib.mk") added header dependency to the rule, but as the rule uses $^, the headers are added to the compiler command line. This can cause unexpected precompiled header files being generated when compilation fails: $ echo { >> openat2_test.c $ make gcc -Wall -O2 -g -fsanitize=address -fsanitize=undefined openat2_test.c tools/testing/selftests/kselftest_harness.h tools/testing/selftests/kselftest.h helpers.c -o tools/testing/selftests/openat2/openat2_test openat2_test.c:313:1: error: expected identifier or ‘(’ before ‘{’ token 313 | { | ^ make: *** [../lib.mk:140: tools/testing/selftests/openat2/openat2_test] Error 1 $ file openat2_test* openat2_test: GCC precompiled header (version 014) for C openat2_test.c: C source, ASCII text Fix it by filtering out the headers, so that we'll only pass the actual *.c files in the compiler command line. Fixes: 1056d3d2c97e ("selftests: enforce local header dependency in lib.mk") Signed-off-by: Tommi Rantala Acked-by: Kees Cook Reviewed-by: Christian Brauner Signed-off-by: Shuah Khan

selftests: Extract run_kselftest.sh and generate stand-alone test list

2020-10-07T13:58:54+00:00

Instead of building a script on the fly (which just repeats the same thing for each test collection), move the script out of the Makefile and into run_kselftest.sh, which reads kselftest-list.txt. Adjust the emit_tests target to report each test on a separate line so that test running tools (e.g. LAVA) can easily remove individual tests (for example, as seen in [1]). [1] https://github.com/Linaro/test-definitions/pull/208/commits/2e7b62155e4998e54ac0587704932484d4ff84c8 Signed-off-by: Kees Cook Tested-by: Naresh Kamboju Signed-off-by: Shuah Khan

selftests: use "$(MAKE)" instead of "make" for headers_install

2020-08-31T20:48:46+00:00

If top make invocation uses -j4 or larger, this patch reduces "make headers_install" subtask run time from 30 to 7 seconds. CC: Shuah Khan CC: Shuah Khan CC: linux-kselftest@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Denys Vlasenko Signed-off-by: Shuah Khan

selftests: fix condition in run_tests

2020-07-07T20:11:31+00:00

The check if there are any files to install in case of no files compares "X " with "X" so never false. Remove extra spaces. It may make sense to use make's $(if) function here. Signed-off-by: Yauheni Kaliuta Signed-off-by: Shuah Khan

selftests: do not use .ONESHELL

2020-07-07T20:11:21+00:00

Using one shell for the whole recipe with long lists can cause make[1]: execvp: /bin/sh: Argument list too long with some shells. Triggered by commit 309b81f0fdc4 ("selftests/bpf: Install generated test progs") It requires to change the rule which rely on the one shell behaviour (run_tests). Simplify also INSTALL_SINGLE_RULE, remove extra echo, required to workaround .ONESHELL. Signed-off-by: Yauheni Kaliuta Cc: Jiri Benc Cc: Shuah Khan Signed-off-by: Shuah Khan