kernel/linux.git/tools/testing/selftests/drivers, branch v6.1.168

selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2

2026-03-04T12:20:03+00:00

[ Upstream commit a2646773a005b59fd1dc7ff3ba15df84889ca5d2 ] As explained in [1], iproute2 started rejecting tc-police burst sizes that result in an overflow. This can happen when the burst size is high enough and the rate is low enough. A couple of test cases specify such configurations, resulting in iproute2 errors and test failure. Fix by reducing the burst size so that the test will pass with both new and old iproute2 versions. [1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/ Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions") Signed-off-by: Ido Schimmel Signed-off-by: Petr Machata Reviewed-by: Simon Horman Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: netdevsim: set test timeout to 10 minutes

2025-12-06T21:12:31+00:00

commit afbf75e8da8ce8a0698212953d350697bb4355a6 upstream. The longest running netdevsim test, nexthop.sh, currently takes 5 min to finish. Around 260s to be exact, and 310s on a debug kernel. The default timeout in selftest is 45sec, so we need an explicit config. Give ourselves some headroom and use 10min. Commit under Fixes isn't really to "blame" but prior to that netdevsim tests weren't integrated with kselftest infra so blaming the tests themselves doesn't seem right, either. Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests") Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh

2025-12-06T21:12:29+00:00

[ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ] The script "ethtool-common.sh" is not installed in INSTALL_PATH, and triggers some errors when I try to run the test 'drivers/net/netdevsim/ethtool-coalesce.sh': TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory # ./ethtool-coalesce.sh: line 25: make_netdev: command not found # ethtool: bad command line argument(s) # ./ethtool-coalesce.sh: line 124: check: command not found # ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected # FAILED /0 checks not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1 Install this file to avoid this error. After this patch: TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # PASSED all 22 checks ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh") Signed-off-by: Wang Liang Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

netdevsim: add Makefile for selftests

2025-12-06T21:12:29+00:00

[ Upstream commit 8ff25dac88f616ebebb30830e3a20f079d7a30c9 ] Add a Makefile for netdevsim selftests and add selftests path to MAINTAINERS Signed-off-by: David Wei Link: https://lore.kernel.org/r/20240130214620.3722189-5-dw@davidwei.uk Signed-off-by: Jakub Kicinski Stable-dep-of: d01f8136d46b ("selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh") Signed-off-by: Sasha Levin

net: netdevsim: try to close UDP port harness races

2025-02-21T12:49:22+00:00

[ Upstream commit 50bf398e1ceacb9a7f85bd3bdca065ebe5cb6159 ] syzbot discovered that we remove the debugfs files after we free the netdev. Try to clean up the relevant dir while the device is still around. Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Reviewed-by: Michal Swiatkowski Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mlxsw: sharedbuffer: Ensure no extra packets are counted

2024-12-19T17:08:53+00:00

[ Upstream commit 5f2c7ab15fd806043db1a7d54b5ec36be0bd93b1 ] The test assumes that the packet it is sending is the only packet being passed to the device. However, it is not the case and so other packets are filling the buffers as well. Therefore, the test sometimes fails because it is reading a maximum occupancy that is larger than expected. Add egress filters on $h1 and $h2 that will guarantee the above. Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test") Signed-off-by: Danielle Ratson Reviewed-by: Ido Schimmel Signed-off-by: Ido Schimmel Signed-off-by: Petr Machata Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mlxsw: sharedbuffer: Remove duplicate test cases

2024-12-19T17:08:53+00:00

[ Upstream commit 6c46ad4d1bb2e8ec2265296e53765190f6e32f33 ] On both port_tc_ip_test() and port_tc_arp_test(), the max occupancy is checked on $h2 twice, when only the error message is different and does not match the check itself. Remove the two duplicated test cases from the test. Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test") Signed-off-by: Danielle Ratson Reviewed-by: Ido Schimmel Signed-off-by: Ido Schimmel Signed-off-by: Petr Machata Link: https://patch.msgid.link/d9eb26f6fc16a06a30b5c2c16ad80caf502bc561.1733414773.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mlxsw: sharedbuffer: Remove h1 ingress test case

2024-12-19T17:08:53+00:00

[ Upstream commit cf3515c556907b4da290967a2a6cbbd9ee0ee723 ] The test is sending only one packet generated with mausezahn from $h1 to $h2. However, for some reason, it is testing for non-zero maximum occupancy in both the ingress pool of $h1 and $h2. The former only passes when $h2 happens to send a packet. Avoid intermittent failures by removing unintentional test case regarding the ingress pool of $h1. Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test") Signed-off-by: Danielle Ratson Reviewed-by: Ido Schimmel Signed-off-by: Ido Schimmel Signed-off-by: Petr Machata Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

mlxsw: spectrum_acl: Fix ACL scale regression and firmware errors

2024-08-03T06:49:05+00:00

[ Upstream commit 75d8d7a63065b18df9555dbaab0b42d4c6f20943 ] ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and newer ASICs can share the same mask if their masks only differ in up to 8 consecutive bits. For example, consider the following filters: # tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop # tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop The second filter can use the same mask as the first (dst_ip/24) with a delta of 1 bit. However, the above only works because the two filters have different values in the common unmasked part (dst_ip/24). When entries have the same value in the common unmasked part they create undesired collisions in the device since many entries now have the same key. This leads to firmware errors such as [1] and to a reduced scale. Fix by adjusting the hash table key to only include the value in the common unmasked part. That is, without including the delta bits. That way the driver will detect the collision during filter insertion and spill the filter into the circuit TCAM (C-TCAM). Add a test case that fails without the fix and adjust existing cases that check C-TCAM spillage according to the above limitation. [1] mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available)) Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP") Reported-by: Alexander Zubkov Signed-off-by: Ido Schimmel Reviewed-by: Amit Cohen Tested-by: Alexander Zubkov Signed-off-by: Petr Machata Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

mlxsw: spectrum_acl_tcam: Fix stack corruption

2024-02-23T08:12:53+00:00

commit 483ae90d8f976f8339cf81066312e1329f2d3706 upstream. When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Reported-by: Orel Hagag Signed-off-by: Ido Schimmel Reviewed-by: Amit Cohen Signed-off-by: Petr Machata Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman