kernel/linux.git/tools/testing/selftests/drivers/net, branch v6.6.132

selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2

2026-03-04T12:20:17+00:00

[ Upstream commit a2646773a005b59fd1dc7ff3ba15df84889ca5d2 ] As explained in [1], iproute2 started rejecting tc-police burst sizes that result in an overflow. This can happen when the burst size is high enough and the rate is low enough. A couple of test cases specify such configurations, resulting in iproute2 errors and test failure. Fix by reducing the burst size so that the test will pass with both new and old iproute2 versions. [1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/ Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions") Signed-off-by: Ido Schimmel Signed-off-by: Petr Machata Reviewed-by: Simon Horman Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: bonding: add delay before each xvlan_over_bond connectivity check

2026-01-11T14:21:35+00:00

[ Upstream commit 2c28ee720ad14f58eb88a97ec3efe7c5c315ea5d ] Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular kernel, while the tests consistently pass on a debug kernel. This suggests a timing-sensitive issue. To mitigate this, introduce a short sleep before each xvlan_over_bond connectivity check. The delay helps ensure neighbor and route cache have fully converged before verifying connectivity. The sleep interval is kept minimal since check_connection() is invoked nearly 100 times during the test. Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing") Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org Signed-off-by: Hangbin Liu Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: bonding: add ipvlan over bond testing

2026-01-11T14:21:35+00:00

[ Upstream commit 08ac69b24507ab06871c18adc421c9d4f1008c61 ] This rework bond_macvlan.sh into bond_macvlan_ipvlan.sh We only test bridge mode for macvlan and l2 mode ]# ./bond_macvlan_ipvlan.sh TEST: active-backup/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: active-backup/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-tlb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-tlb/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-alb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-alb/ipvlan_l2: IPv4: client->server [ OK ] ... Signed-off-by: Etienne Champetier Link: https://patch.msgid.link/20250109032819.326528-3-champetier.etienne@gmail.com Signed-off-by: Jakub Kicinski Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin

selftests: bonding: Add more missing config options

2026-01-11T14:21:35+00:00

[ Upstream commit dd2d40acdbb2b9e6bcddd5424b0e00c1760ecf26 ] As a followup to commit 03fb8565c880 ("selftests: bonding: add missing build configs"), add more networking-specific config options which are needed for bonding tests. For testing, I used the minimal config generated by virtme-ng and I added the options in the config file. All bonding tests passed. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") # for ipv6 Fixes: 6cbe791c0f4e ("kselftest: bonding: add num_grat_arp test") # for tc options Fixes: 222c94ec0ad4 ("selftests: bonding: add tests for ether type changes") # for nlmon Suggested-by: Jakub Kicinski Signed-off-by: Benjamin Poirier Link: https://lore.kernel.org/r/20240116154926.202164-1-bpoirier@nvidia.com Signed-off-by: Paolo Abeni Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin

selftests: bonding: add missing build configs

2026-01-11T14:21:34+00:00

[ Upstream commit 03fb8565c880d57952d9b4ba0b36468bae52b554 ] bonding tests also try to create bridge, veth and dummy interfaces. These are not currently listed in config. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Fixes: c078290a2b76 ("selftests: include bonding tests into the kselftest infra") Acked-by: Muhammad Usama Anjum Link: https://lore.kernel.org/r/20240116020201.1883023-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin

selftests: netdevsim: set test timeout to 10 minutes

2025-11-24T09:29:55+00:00

commit afbf75e8da8ce8a0698212953d350697bb4355a6 upstream. The longest running netdevsim test, nexthop.sh, currently takes 5 min to finish. Around 260s to be exact, and 310s on a debug kernel. The default timeout in selftest is 45sec, so we need an explicit config. Give ourselves some headroom and use 10min. Commit under Fixes isn't really to "blame" but prior to that netdevsim tests weren't integrated with kselftest infra so blaming the tests themselves doesn't seem right, either. Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests") Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh

2025-11-24T09:29:51+00:00

[ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ] The script "ethtool-common.sh" is not installed in INSTALL_PATH, and triggers some errors when I try to run the test 'drivers/net/netdevsim/ethtool-coalesce.sh': TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory # ./ethtool-coalesce.sh: line 25: make_netdev: command not found # ethtool: bad command line argument(s) # ./ethtool-coalesce.sh: line 124: check: command not found # ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected # FAILED /0 checks not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1 Install this file to avoid this error. After this patch: TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # PASSED all 22 checks ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh") Signed-off-by: Wang Liang Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

netdevsim: add Makefile for selftests

2025-11-24T09:29:51+00:00

[ Upstream commit 8ff25dac88f616ebebb30830e3a20f079d7a30c9 ] Add a Makefile for netdevsim selftests and add selftests path to MAINTAINERS Signed-off-by: David Wei Link: https://lore.kernel.org/r/20240130214620.3722189-5-dw@davidwei.uk Signed-off-by: Jakub Kicinski Stable-dep-of: d01f8136d46b ("selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh") Signed-off-by: Sasha Levin

net: netdevsim: try to close UDP port harness races

2025-02-08T08:52:30+00:00

[ Upstream commit 50bf398e1ceacb9a7f85bd3bdca065ebe5cb6159 ] syzbot discovered that we remove the debugfs files after we free the netdev. Try to clean up the relevant dir while the device is still around. Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Reviewed-by: Michal Swiatkowski Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: mlxsw: sharedbuffer: Ensure no extra packets are counted

2024-12-19T17:11:28+00:00

[ Upstream commit 5f2c7ab15fd806043db1a7d54b5ec36be0bd93b1 ] The test assumes that the packet it is sending is the only packet being passed to the device. However, it is not the case and so other packets are filling the buffers as well. Therefore, the test sometimes fails because it is reading a maximum occupancy that is larger than expected. Add egress filters on $h1 and $h2 that will guarantee the above. Fixes: a865ad999603 ("selftests: mlxsw: Add shared buffer traffic test") Signed-off-by: Danielle Ratson Reviewed-by: Ido Schimmel Signed-off-by: Ido Schimmel Signed-off-by: Petr Machata Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin