kernel/linux.git/tools/testing/selftests/drivers/net/bonding, branch v6.6.132

selftests: bonding: add delay before each xvlan_over_bond connectivity check

2026-01-11T14:21:35+00:00

[ Upstream commit 2c28ee720ad14f58eb88a97ec3efe7c5c315ea5d ] Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular kernel, while the tests consistently pass on a debug kernel. This suggests a timing-sensitive issue. To mitigate this, introduce a short sleep before each xvlan_over_bond connectivity check. The delay helps ensure neighbor and route cache have fully converged before verifying connectivity. The sleep interval is kept minimal since check_connection() is invoked nearly 100 times during the test. Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing") Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org Signed-off-by: Hangbin Liu Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: bonding: add ipvlan over bond testing

2026-01-11T14:21:35+00:00

[ Upstream commit 08ac69b24507ab06871c18adc421c9d4f1008c61 ] This rework bond_macvlan.sh into bond_macvlan_ipvlan.sh We only test bridge mode for macvlan and l2 mode ]# ./bond_macvlan_ipvlan.sh TEST: active-backup/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: active-backup/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-tlb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-tlb/ipvlan_l2: IPv4: client->server [ OK ] ... TEST: balance-alb/macvlan_bridge: IPv4: client->server [ OK ] ... TEST: balance-alb/ipvlan_l2: IPv4: client->server [ OK ] ... Signed-off-by: Etienne Champetier Link: https://patch.msgid.link/20250109032819.326528-3-champetier.etienne@gmail.com Signed-off-by: Jakub Kicinski Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin

selftests: bonding: Add more missing config options

2026-01-11T14:21:35+00:00

[ Upstream commit dd2d40acdbb2b9e6bcddd5424b0e00c1760ecf26 ] As a followup to commit 03fb8565c880 ("selftests: bonding: add missing build configs"), add more networking-specific config options which are needed for bonding tests. For testing, I used the minimal config generated by virtme-ng and I added the options in the config file. All bonding tests passed. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") # for ipv6 Fixes: 6cbe791c0f4e ("kselftest: bonding: add num_grat_arp test") # for tc options Fixes: 222c94ec0ad4 ("selftests: bonding: add tests for ether type changes") # for nlmon Suggested-by: Jakub Kicinski Signed-off-by: Benjamin Poirier Link: https://lore.kernel.org/r/20240116154926.202164-1-bpoirier@nvidia.com Signed-off-by: Paolo Abeni Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin

selftests: bonding: add missing build configs

2026-01-11T14:21:34+00:00

[ Upstream commit 03fb8565c880d57952d9b4ba0b36468bae52b554 ] bonding tests also try to create bridge, veth and dummy interfaces. These are not currently listed in config. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Fixes: c078290a2b76 ("selftests: include bonding tests into the kselftest infra") Acked-by: Muhammad Usama Anjum Link: https://lore.kernel.org/r/20240116020201.1883023-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Stable-dep-of: 2c28ee720ad1 ("selftests: bonding: add delay before each xvlan_over_bond connectivity check") Signed-off-by: Sasha Levin

selftests: bonding: set active slave to primary eth1 specifically

2024-03-01T12:35:07+00:00

[ Upstream commit cd65c48d66920457129584553f217005d09b1edb ] In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1]. [ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1 Fix it by setting active slave to primary slave specifically before testing. [1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: bonding: Check initial state

2024-02-05T20:14:38+00:00

[ Upstream commit 8cc063ae1b3dbe416ce62a15d49af4c2314b45fe ] The purpose of the test_LAG_cleanup() function is to check that some hardware addresses are removed from underlying devices after they have been unenslaved. The test function simply checks that those addresses are not present at the end. However, if the addresses were never added to begin with due to some error in device setup, the test function currently passes. This is a false positive since in that situation the test did not actually exercise the intended functionality. Add a check that the expected addresses are indeed present after device setup. This makes the test function more robust. I noticed this problem when running the team/dev_addr_lists.sh test on a system without support for dummy and ipv6: tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh Error: Unknown device type. Error: Unknown device type. This program is not intended to be run as root. RTNETLINK answers: Operation not supported TEST: team cleanup mode lacp [ OK ] Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Signed-off-by: Benjamin Poirier Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: bonding: do not test arp/ns target with mode balance-alb/tlb

2024-02-01T00:19:05+00:00

[ Upstream commit a2933a8759a62269754e54733d993b19de870e84 ] The prio_arp/ns tests hard code the mode to active-backup. At the same time, The balance-alb/tlb modes do not support arp/ns target. So remove the prio_arp/ns tests from the loop and only test active-backup mode. Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Reported-by: Jay Vosburgh Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/ Signed-off-by: Hangbin Liu Acked-by: Jay Vosburgh Link: https://lore.kernel.org/r/20240123075917.1576360-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

selftests: bonding: Increase timeout to 1200s

2024-02-01T00:19:00+00:00

[ Upstream commit b01f15a7571b7aa222458bc9bf26ab59bd84e384 ] When tests are run by runner.sh, bond_options.sh gets killed before it can complete: make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding" [...] # timeout set to 120 # selftests: drivers/net/bonding: bond_options.sh # TEST: prio (active-backup miimon primary_reselect 0) [ OK ] # TEST: prio (active-backup miimon primary_reselect 1) [ OK ] # TEST: prio (active-backup miimon primary_reselect 2) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ] # not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds This test includes many sleep statements, at least some of which are related to timers in the operation of the bonding driver itself. Increase the test timeout to allow the test to complete. I ran the test in slightly different VMs (including one without HW virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and 13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s. Fixes: 42a8d4aaea84 ("selftests: bonding: add bonding prio option test") Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t Suggested-by: Jakub Kicinski Signed-off-by: Benjamin Poirier Reviewed-by: Hangbin Liu Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: bonding: Change script interpreter

2024-01-25T23:35:58+00:00

[ Upstream commit c2518da8e6b0e248cfff1d4b6682e14020bd4d3f ] The tests changed by this patch, as well as the scripts they source, use features which are not part of POSIX sh (ex. 'source' and 'local'). As a result, these tests fail when /bin/sh is dash such as on Debian. Change the interpreter to bash so that these tests can run successfully. Fixes: d43eff0b85ae ("selftests: bonding: up/down delay w/ slave link flapping") Tested-by: Hangbin Liu Reviewed-by: Hangbin Liu Reviewed-by: Petr Machata Signed-off-by: Benjamin Poirier Reviewed-by: Przemek Kitszel Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

selftests: bonding: do not set port down when adding to bond

2024-01-10T16:16:50+00:00

[ Upstream commit 61fa2493ca76fd7bb74e13f0205274f4ab0aa696 ] Similar to commit be809424659c ("selftests: bonding: do not set port down before adding to bond"). The bond-arp-interval-causes-panic test failed after commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") as the kernel will set the port down _after_ adding to bond if setting port down specifically. Fix it by removing the link down operation when adding to bond. Fixes: 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id") Signed-off-by: Hangbin Liu Tested-by: Benjamin Poirier Signed-off-by: David S. Miller Signed-off-by: Sasha Levin