kernel/linux.git/tools/testing/selftests/breakpoints, branch v6.19.11

selftests: complete kselftest include centralization

2025-11-27T22:24:31+00:00

This follow-up patch completes centralization of kselftest.h and ksefltest_harness.h includes in remaining seltests files, replacing all relative paths with a non-relative paths using shared -I include path in lib.mk Tested with gcc-13.3 and clang-18.1, and cross-compiled successfully on riscv, arm64, x86_64 and powerpc arch. [reddybalavignesh9979@gmail.com: add selftests include path for kselftest.h] Link: https://lkml.kernel.org/r/20251017090201.317521-1-reddybalavignesh9979@gmail.com Link: https://lkml.kernel.org/r/20251016104409.68985-1-reddybalavignesh9979@gmail.com Signed-off-by: Bala-Vignesh-Reddy Suggested-by: Andrew Morton Link: https://lore.kernel.org/lkml/20250820143954.33d95635e504e94df01930d0@linux-foundation.org/ Reviewed-by: Wei Yang Cc: David Hildenbrand Cc: David S. Miller Cc: Eric Dumazet Cc: Günther Noack Cc: Jakub Kacinski Cc: Liam Howlett Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Mickael Salaun Cc: Ming Lei Cc: Paolo Abeni Cc: Shuah Khan Cc: Simon Horman Cc: Suren Baghdasaryan Cc: Vlastimil Babka Signed-off-by: Andrew Morton

selftests: breakpoints: use suspend_stats to reliably check suspend success

2025-07-10T20:21:30+00:00

The step_after_suspend_test verifies that the system successfully suspended and resumed by setting a timerfd and checking whether the timer fully expired. However, this method is unreliable due to timing races. In practice, the system may take time to enter suspend, during which the timer may expire just before or during the transition. As a result, the remaining time after resume may show non-zero nanoseconds, even if suspend/resume completed successfully. This leads to false test failures. Replace the timer-based check with a read from /sys/power/suspend_stats/success. This counter is incremented only after a full suspend/resume cycle, providing a reliable and race-free indicator. Also remove the unused file descriptor for /sys/power/state, which remained after switching to a system() call to trigger suspend [1]. [1] https://lore.kernel.org/all/20240930224025.2858767-1-yifei.l.liu@oracle.com/ Link: https://lore.kernel.org/r/20250626191626.36794-1-moonhee.lee.ca@gmail.com Fixes: c66be905cda2 ("selftests: breakpoints: use remaining time to check if suspend succeed") Signed-off-by: Moon Hee Lee Signed-off-by: Shuah Khan

selftests: breakpoints: use remaining time to check if suspend succeed

2024-10-02T20:37:30+00:00

step_after_suspend_test fails with device busy error while writing to /sys/power/state to start suspend. The test believes it failed to enter suspend state with $ sudo ./step_after_suspend_test TAP version 13 Bail out! Failed to enter Suspend state However, in the kernel message, I indeed see the system get suspended and then wake up later. [611172.033108] PM: suspend entry (s2idle) [611172.044940] Filesystems sync: 0.006 seconds [611172.052254] Freezing user space processes [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) [611172.067920] OOM killer disabled. [611172.072465] Freezing remaining freezable tasks [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) [611172.117126] serial 00:03: disabled some other hardware get reconnected [611203.136277] OOM killer enabled. [611203.140637] Restarting tasks ... [611203.141135] usb 1-8.1: USB disconnect, device number 7 [611203.141755] done. [611203.155268] random: crng reseeded on system resumption [611203.162059] PM: suspend exit After investigation, I noticed that for the code block if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) ksft_exit_fail_msg("Failed to enter Suspend state\n"); The write will return -1 and errno is set to 16 (device busy). It should be caused by the write function is not successfully returned before the system suspend and the return value get messed when waking up. As a result, It may be better to check the time passed of those few instructions to determine whether the suspend is executed correctly for it is pretty hard to execute those few lines for 5 seconds. The timer to wake up the system is set to expire after 5 seconds and no re-arm. If the timer remaining time is 0 second and 0 nano secomd, it means the timer expired and wake the system up. Otherwise, the system could be considered to enter the suspend state failed if there is any remaining time. After appling this patch, the test would not fail for it believes the system does not go to suspend by mistake. It now could continue to the rest part of the test after suspend. Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") Reported-by: Sinadin Shan Signed-off-by: Yifei Liu Signed-off-by: Shuah Khan

selftests/breakpoints:Remove unused variable

2024-07-11T17:23:55+00:00

This variable is never referenced in the code, just remove them that this problem was discovered by reading the code Signed-off-by: Zhu Jun Signed-off-by: Shuah Khan

selftests/breakpoints: Fix format specifier in ksft_print_msg in step_after_suspend_test.c

2023-11-30T21:32:34+00:00

In the function 'tools/testing/selftests/breakpoints/run_test' within step_after_suspend_test.c, the ksft_print_msg function call incorrectly used '$s' as a format specifier. This commit corrects this typo to use the proper '%s' format specifier, ensuring the error message from waitpid() is correctly displayed. The issue manifested as a compilation warning (too many arguments for format [-Wformat-extra-args]), potentially obscuring actual runtime errors and complicating debugging processes. This fix enhances the clarity of error messages during test failures and ensures compliance with standard C format string conventions. Signed-off-by: angquan yu Signed-off-by: Shuah Khan

selftests:breakpoints: Fix Format String Warning in breakpoint_test

2023-11-30T21:32:28+00:00

This commit resolves a compiler warning regardingthe use of non-literal format strings in breakpoint_test.c. The functions `ksft_test_result_pass` and `ksft_test_result_fail` were previously called with a variable `msg` directly, which could potentially lead to format string vulnerabilities. Changes made: - Modified the calls to `ksft_test_result_pass` and `ksft_test_result_fail` by adding a "%s" format specifier. This explicitly declares `msg` as a string argument, adhering to safer coding practices and resolving the compiler warning. This change does not affect the functional behavior of the code but ensures better code safety and compliance with recommended C programming standards. The previous warning is "breakpoint_test.c:287:17: warning: format not a string literal and no format arguments [-Wformat-security] 287 | ksft_test_result_pass(msg); | ^~~~~~~~~~~~~~~~~~~~~ breakpoint_test.c:289:17: warning: format not a string literal and no format arguments [-Wformat-security] 289 | ksft_test_result_fail(msg); | " Signed-off-by: angquan yu Signed-off-by: Shuah Khan

selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.c

2021-02-09T00:04:41+00:00

When call ptrace(PTRACE_CONT, ...) failed, use correct error messages. Signed-off-by: Tiezhu Yang Signed-off-by: Shuah Khan

selftests: breakpoints: do not use ksft_exit_skip after ksft_set_plan

2020-07-06T21:47:48+00:00

Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests than planned. Use ksft_test_result_skip for the individual tests. The call in suspend() is fine, but ksft_set_plan should be after it. Signed-off-by: Paolo Bonzini Signed-off-by: Shuah Khan

selftests: breakpoints: fix computation of test plan

2020-07-06T21:47:24+00:00

The computation of the test plan uses the available_cpus bitset before calling sched_getaffinity to fill it in. The resulting plan is bogus, fix it. Signed-off-by: Paolo Bonzini Signed-off-by: Shuah Khan

.gitignore: add SPDX License Identifier

2020-03-25T10:50:48+00:00

Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman