kernel/linux.git/tools/testing/selftests/bpf, branch v4.17.5

selftests: bpf: config: enable NET_SCH_INGRESS for xdp_meta.sh

2018-05-18T19:39:39+00:00

When running bpf's selftest test_xdp_meta.sh it fails: ./test_xdp_meta.sh Error: Specified qdisc not found. selftests: test_xdp_meta [FAILED] Need to enable CONFIG_NET_SCH_INGRESS and CONFIG_NET_CLS_ACT to get the test to pass. Fixes: 22c8852624fc ("bpf: improve selftests and add tests for meta pointer") Signed-off-by: Anders Roxell Signed-off-by: Daniel Borkmann

selftests/bpf: check return value of fopen in test_verifier.c

2018-05-17T20:18:46+00:00

Commit 0a6748740368 ("selftests/bpf: Only run tests if !bpf_disabled") forgot to check return value of fopen. This caused some confusion, when running test_verifier (from tools/testing/selftests/bpf/) on an older kernel (< v4.4) as it will simply seqfault. This fix avoids the segfault and prints an error, but allow program to continue. Given the sysctl was introduced in 1be7f75d1668 ("bpf: enable non-root eBPF programs"), we know that the running kernel cannot support unpriv, thus continue with unpriv_disabled = true. Fixes: 0a6748740368 ("selftests/bpf: Only run tests if !bpf_disabled") Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann

bpf: minor fix to selftest test_stacktrace_build_id()

2018-05-01T22:18:06+00:00

1. remove useless parameter list to ./urandom_read 2. add missing "\n" to the end of an error message Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Cc: Alexei Starovoitov Cc: Daniel Borkmann Signed-off-by: Song Liu Signed-off-by: Daniel Borkmann

tools/bpf: fix test_sock and test_sock_addr.sh failure

2018-04-18T22:16:37+00:00

The bpf selftests test_sock and test_sock_addr.sh failed in my test machine. The failure looks like: $ ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL] Test case: sock_create load w/ expected_attach_type .. [FAIL] Test case: attach type mismatch bind4 vs bind6 .. [FAIL] ... Summary: 4 PASSED, 12 FAILED $ ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ..... ERROR: Timeout waiting for test IP to become available. In test_sock, bpf program loads failed due to hitting memlock limits. In test_sock_addr.sh, my test machine is a ipv6 only test box and using "ping" without specifying address family for an ipv6 address does not work. This patch fixed the issue by including header bpf_rlimit.h in test_sock.c and test_sock_addr.c, and specifying address family for ping command. Cc: Andrey Ignatov Signed-off-by: Yonghong Song Acked-by: Andrey Ignatov Signed-off-by: Daniel Borkmann

selftests: bpf: update .gitignore with missing generated files

2018-04-10T22:59:30+00:00

Signed-off-by: Anders Roxell Signed-off-by: Daniel Borkmann

selftests/bpf: Selftest for sys_bind post-hooks.

2018-03-31T00:16:40+00:00

Add selftest for attach types `BPF_CGROUP_INET4_POST_BIND` and `BPF_CGROUP_INET6_POST_BIND`. The main things tested are: * prog load behaves as expected (valid/invalid accesses in prog); * prog attach behaves as expected (load- vs attach-time attach types); * `BPF_CGROUP_INET_SOCK_CREATE` can be attached in a backward compatible way; * post-hooks return expected result and errno. Example: # ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [PASS] Test case: sock_create load w/ expected_attach_type .. [PASS] Test case: attach type mismatch bind4 vs bind6 .. [PASS] Test case: attach type mismatch bind6 vs bind4 .. [PASS] Test case: attach type mismatch default vs bind4 .. [PASS] Test case: attach type mismatch bind6 vs sock_create .. [PASS] Test case: bind4 reject all .. [PASS] Test case: bind6 reject all .. [PASS] Test case: bind6 deny specific IP & port .. [PASS] Test case: bind4 allow specific IP & port .. [PASS] Test case: bind4 allow all .. [PASS] Test case: bind6 allow all .. [PASS] Summary: 16 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann

selftests/bpf: Selftest for sys_connect hooks

2018-03-31T00:16:14+00:00

Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT attach types. Try to connect(2) to specified IP:port and test that: * remote IP:port pair is overridden; * local end of connection is bound to specified IP. All combinations of IPv4/IPv6 and TCP/UDP are tested. Example: # tcpdump -pn -i lo -w connect.pcap 2>/dev/null & [1] 478 # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ... OK Load bind4 with invalid type (can pollute stderr) ... REJECTED Load bind4 with valid type ... OK Attach bind4 with invalid type ... REJECTED Attach bind4 with valid type ... OK Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r2 = 23569 1: (63) *(u32 *)(r1 +24) = r2 2: (b7) r2 = 16777343 3: (63) *(u32 *)(r1 +4) = r2 invalid bpf_context access off=4 size=4 [ 1518.404609] random: crng init done libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect4' libbpf: failed to load object './connect4_prog.o' ... REJECTED Load connect4 with valid type ... OK Attach connect4 with invalid type ... REJECTED Attach connect4 with valid type ... OK Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447) Load bind6 with invalid type (can pollute stderr) ... REJECTED Load bind6 with valid type ... OK Attach bind6 with invalid type ... REJECTED Attach bind6 with valid type ... OK Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r6 = 0 1: (63) *(u32 *)(r1 +12) = r6 invalid bpf_context access off=12 size=4 libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect6' libbpf: failed to load object './connect6_prog.o' ... REJECTED Load connect6 with valid type ... OK Attach connect6 with invalid type ... REJECTED Attach connect6 with valid type ... OK Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 37458) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 39315) ### SUCCESS # egrep 'connect$.*AF_INET' connect.trace | \ > egrep -vw 'htons\(1025$' | fold -b -s -w 72 502 connect(7, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(8, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(9, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 502 connect(10, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 # fg tcpdump -pn -i lo -w connect.pcap 2> /dev/null # tcpdump -r connect.pcap -n tcp | cut -c 1-72 reading from file connect.pcap, link-type EN10MB (Ethernet) 17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333 17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112 17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w 17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1, 17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win 17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac 17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt 17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann

selftests/bpf: Selftest for sys_bind hooks

2018-03-31T00:15:30+00:00

Add selftest to work with bpf_sock_addr context from `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs. Try to bind(2) on IP:port and apply: * loads to make sure context can be read correctly, including narrow loads (byte, half) for IP and full-size loads (word) for all fields; * stores to those fields allowed by verifier. All combination from IPv4/IPv6 and TCP/UDP are tested. Both scenarios are tested: * valid programs can be loaded and attached; * invalid programs can be neither loaded nor attached. Test passes when expected data can be read from context in the BPF-program, and after the call to bind(2) socket is bound to IP:port pair that was written by BPF-program to the context. Example: # ./test_sock_addr Attached bind4 program. Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Attached bind6 program. Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) ### SUCCESS Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann

selftests/bpf: test for bpf_get_stackid() from raw tracepoints

2018-03-28T20:55:19+00:00

similar to traditional traceopint test add bpf_get_stackid() test from raw tracepoints and reduce verbosity of existing stackmap test Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann

bpf: sockmap sample test for bpf_msg_pull_data

2018-03-19T20:14:41+00:00

This adds an option to test the msg_pull_data helper. This uses two options txmsg_start and txmsg_end to let the user specify start and end bytes to pull. The options can be used with txmsg_apply, txmsg_cork options as well as with any of the basic tests, txmsg, txmsg_redir and txmsg_drop (plus noisy variants) to run pull_data inline with those tests. By giving user direct control over the variables we can easily do negative testing as well as positive tests. Signed-off-by: John Fastabend Acked-by: David S. Miller Signed-off-by: Daniel Borkmann