kernel/linux.git/tools/testing/cxl/test, branch v6.6.47

cxl/region: check interleave capability

2024-07-05T07:34:07+00:00

[ Upstream commit 84328c5acebc10c8cdcf17283ab6c6d548885bfc ] Since interleave capability is not verified, if the interleave capability of a target does not match the region need, committing decoder should have failed at the device end. In order to checkout this error as quickly as possible, driver needs to check the interleave capability of target during attaching it to region. Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register), bits 11 and 12 indicate the capability to establish interleaving in 3, 6, 12 and 16 ways. If these bits are not set, the target cannot be attached to a region utilizing such interleave ways. Additionally, bits 8 and 9 represent the capability of the bits used for interleaving in the address, Linux tracks this in the cxl_port interleave_mask. Per CXL specification r3.1(8.2.4.20.13 Decoder Protection): eIW means encoded Interleave Ways. eIG means encoded Interleave Granularity. in HPA: if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used, the interleave bits are none, the following check is ignored. if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits start at bit position eIG + 8 and end at eIG + eIW + 8 - 1. if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits start at bit position eIG + 8 and end at eIG + eIW - 1. if the interleave mask is insufficient to cover the required interleave bits, the target cannot be attached to the region. Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders") Signed-off-by: Yao Xingtao Reviewed-by: Dan Williams Reviewed-by: Jonathan Cameron Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com Signed-off-by: Dave Jiang Signed-off-by: Sasha Levin

cxl/test: Add missing vmalloc.h for tools/testing/cxl/test/mem.c

2024-06-21T12:38:26+00:00

[ Upstream commit d55510527153d17a3af8cc2df69c04f95ae1350d ] tools/testing/cxl/test/mem.c uses vmalloc() and vfree() but does not include linux/vmalloc.h. Kernel v6.10 made changes that causes the currently included headers not depend on vmalloc.h and therefore mem.c can no longer compile. Add linux/vmalloc.h to fix compile issue. CC [M] tools/testing/cxl/test/mem.o tools/testing/cxl/test/mem.c: In function ‘label_area_release’: tools/testing/cxl/test/mem.c:1428:9: error: implicit declaration of function ‘vfree’; did you mean ‘kvfree’? [-Werror=implicit-function-declaration] 1428 | vfree(lsa); | ^~~~~ | kvfree tools/testing/cxl/test/mem.c: In function ‘cxl_mock_mem_probe’: tools/testing/cxl/test/mem.c:1466:22: error: implicit declaration of function ‘vmalloc’; did you mean ‘kmalloc’? [-Werror=implicit-function-declaration] 1466 | mdata->lsa = vmalloc(LSA_SIZE); | ^~~~~~~ | kmalloc Fixes: 7d3eb23c4ccf ("tools/testing/cxl: Introduce a mock memory device + driver") Reviewed-by: Dan Williams Reviewed-by: Alison Schofield Link: https://lore.kernel.org/r/20240528225551.1025977-1-dave.jiang@intel.com Signed-off-by: Dave Jiang Signed-off-by: Sasha Levin

cxl: Add cxl_num_decoders_committed() usage to cxl_test

2024-01-10T16:17:02+00:00

commit e05501e8a84eee4f819f31b9ce663bddd01b3b69 upstream. Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") missed the conversion for cxl_test. Add usage of cxl_num_decoders_committed() to replace the open coding. Suggested-by: Alison Schofield Signed-off-by: Dave Jiang Reviewed-by: Fan Ni Link: https://lore.kernel.org/r/169929160525.824083.11813222229025394254.stgit@djiang5-mobl3 Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

cxl/region: Fix x1 root-decoder granularity calculations

2023-11-28T17:20:07+00:00

commit 98a04c7aced2b43b3ac4befe216c4eecc7257d4b upstream. Root decoder granularity must match value from CFWMS, which may not be the region's granularity for non-interleaved root decoders. So when calculating granularities for host bridge decoders, use the region's granularity instead of the root decoder's granularity to ensure the correct granularities are set for the host bridge decoders and any downstream switch decoders. Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch. Region created with 2048 granularity using following command line: cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \ -g 2048 -s 2048M Use "cxl list -PDE | grep granularity" to get a view of the granularity set at each level of the topology. Before this patch: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":256, After: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, Fixes: 27b3f8d13830 ("cxl/region: Program target lists") Cc: Signed-off-by: Jim Harris Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in [djbw: fixup the prebuilt cxl_test region] Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

cxl/pci: Clarify devm host for memdev relative setup

2023-11-20T10:59:30+00:00

[ Upstream commit f29a824b0b6710328a78b018de3c2cfa9db65876 ] It is all too easy to get confused about @dev usage in the CXL driver stack. Before adding a new cxl_pci_probe() setup operation that has a devm lifetime dependent on @cxlds->dev binding, but also references @cxlmd->dev, and prints messages, rework the devm_cxl_add_memdev() and cxl_memdev_setup_fw_upload() function signatures to make this distinction explicit. I.e. pass in the devm context as an @host argument rather than infer it from other objects. This is in preparation for adding a devm_cxl_sanitize_setup_notifier(). Note the whitespace fixup near the change of the devm_cxl_add_memdev() signature. That uncaught typo originated in the patch that added cxl_memdev_security_init(). Reviewed-by: Jonathan Cameron Reviewed-by: Ira Weiny Reviewed-by: Dave Jiang Signed-off-by: Dan Williams Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup") Signed-off-by: Sasha Levin

tools/testing/cxl: Remove unused SZ_512G macro

2023-07-21T05:35:22+00:00

SZ_512G macro has become useless since commit b2f3b74e1072 ("tools/testing/cxl: Move cxl_test resources to the top of memory") so remove it directly. Signed-off-by: Xiao Yang Link: https://lore.kernel.org/r/20230719163103.3392-1-yangx.jy@fujitsu.com Reviewed-by: Dave Jiang Signed-off-by: Vishal Verma

Merge branch 'for-6.5/cxl-rch-eh' into for-6.5/cxl

2023-06-26T01:56:13+00:00

Pick up the first half of the RCH error handling series. The back half needs some fixups for test regressions. Small conflicts with the PMU work around register enumeration and setup helpers.

Merge branch 'for-6.5/cxl-type-2' into for-6.5/cxl

2023-06-26T00:16:51+00:00

Pick up the driver cleanups identified in preparation for CXL "type-2" (accelerator) device support. The major change here from a conflict generation perspective is the split of 'struct cxl_memdev_state' from the core 'struct cxl_dev_state'. Since an accelerator may not care about all the optional features that are standard on a CXL "type-3" (host-only memory expander) device. A silent conflict also occurs with the move of the endpoint port to be a formal property of a 'struct cxl_memdev' rather than drvdata.

Merge branch 'for-6.5/cxl-fwupd' into for-6.5/cxl

2023-06-25T23:12:26+00:00

Add the first typical (non-sanitization) consumer of the new background command infrastructure, firmware update. Given both firmware-update and sanitization were developed in parallel from the common background-command baseline, resolve some minor context conflicts.

tools/testing/cxl: add firmware update emulation to CXL memdevs

2023-06-25T22:58:40+00:00

Add emulation for the 'Get FW Info', 'Transfer FW', and 'Activate FW' CXL mailbox commands to the cxl_test emulated memdevs to enable end-to-end unit testing of a firmware update flow. For now, only advertise an 'offline activation' capability as that is all the CXL memdev driver currently implements. Add some canned values for the serial number fields, and create a platform device sysfs knob to calculate the sha256sum of the firmware image that was received, so a unit test can compare it with the original file that was uploaded. Cc: Davidlohr Bueso Cc: Jonathan Cameron Cc: Russ Weight Cc: Alison Schofield Cc: Ira Weiny Cc: Dave Jiang Cc: Ben Widawsky Cc: Dan Williams Reviewed-by: Jonathan Cameron Reviewed-by: Dave Jiang Signed-off-by: Vishal Verma Link: https://lore.kernel.org/r/20230602-vv-fw_update-v4-4-c6265bd7343b@intel.com Signed-off-by: Dan Williams