kernel/linux.git/tools/power, branch v5.10.257

tools/power cpupower: Reset errno before strtoull()

2026-03-04T12:19:52+00:00

[ Upstream commit f9bd3762cf1bd0c2465f2e6121b340883471d1bf ] cpuidle_state_get_one_value() never cleared errno before calling strtoull(), so a prior ERANGE caused every cpuidle counter read to return zero. Reset errno to 0 before the conversion so each sysfs read is evaluated independently. Link: https://lore.kernel.org/r/20251201121745.3776703-1-kaushlendra.kumar@intel.com Signed-off-by: Kaushlendra Kumar Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

tools/power x86_energy_perf_policy: Prefer driver HWP limits

2025-12-06T21:08:10+00:00

[ Upstream commit 2734fdbc9bb8a3aeb309ba0d62212d7f53f30bc7 ] When we are successful in using cpufreq min/max limits, skip setting the raw MSR limits entirely. This is necessary to avoid undoing any modification that the cpufreq driver makes to our sysfs request. eg. intel_pstate may take our request for a limit that is valid according to HWP.CAP.MIN/MAX and clip it to be within the range available in PLATFORM_INFO. Signed-off-by: Len Brown Signed-off-by: Sasha Levin

tools/power x86_energy_perf_policy: Enhance HWP enable

2025-12-06T21:08:10+00:00

[ Upstream commit c97c057d357c4b39b153e9e430bbf8976e05bd4e ] On enabling HWP, preserve the reserved bits in MSR_PM_ENABLE. Also, skip writing the MSR_PM_ENABLE if HWP is already enabled. Signed-off-by: Len Brown Signed-off-by: Sasha Levin

tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage

2025-12-06T21:08:10+00:00

[ Upstream commit 62127655b7ab7b8c2997041aca48a81bf5c6da0c ] The fopen_or_die() function was previously hardcoded to open files in read-only mode ("r"), ignoring the mode parameter passed to it. This patch corrects fopen_or_die() to use the provided mode argument, allowing for flexible file access as intended. Additionally, the call to fopen_or_die() in err_on_hypervisor() incorrectly used the mode "ro", which is not a valid fopen mode. This is fixed to use the correct "r" mode. Signed-off-by: Kaushlendra Kumar Signed-off-by: Len Brown Signed-off-by: Sasha Levin

tools/cpupower: Fix incorrect size in cpuidle_state_disable()

2025-12-06T21:08:10+00:00

[ Upstream commit 23199d2aa6dcaf6dd2da772f93d2c94317d71459 ] Fix incorrect size parameter passed to cpuidle_state_write_file() in cpuidle_state_disable(). The function was incorrectly using sizeof(disable) which returns the size of the unsigned int variable (4 bytes) instead of the actual length of the string stored in the 'value' buffer. Since 'value' is populated with snprintf() to contain the string representation of the disable value, we should use the length returned by snprintf() to get the correct string length for writing to the sysfs file. This ensures the correct number of bytes is written to the cpuidle state disable file in sysfs. Link: https://lore.kernel.org/r/20250917050820.1785377-1-kaushlendra.kumar@intel.com Signed-off-by: Kaushlendra Kumar Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()

2025-08-28T14:22:42+00:00

[ Upstream commit cda7ac8ce7de84cf32a3871ba5f318aa3b79381e ] In the function mperf_start(), mperf_monitor snapshots the time, tsc and finally the aperf,mperf MSRs. However, this order of snapshotting in is reversed in mperf_stop(). As a result, the C0 residency (which is computed as delta_mperf * 100 / delta_tsc) is under-reported on CPUs that is 100% busy. Fix this by snapshotting time, tsc and then aperf,mperf in mperf_stop() in the same order as in mperf_start(). Link: https://lore.kernel.org/r/20250612122355.19629-2-gautham.shenoy@amd.com Signed-off-by: Gautham R. Shenoy Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

pm: cpupower: bench: Prevent NULL dereference on malloc failure

2025-05-02T05:40:47+00:00

[ Upstream commit 208baa3ec9043a664d9acfb8174b332e6b17fb69 ] If malloc returns NULL due to low memory, 'config' pointer can be NULL. Add a check to prevent NULL dereference. Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com Signed-off-by: Zhongqiu Han Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

cpupower: fix TSC MHz calculation

2025-03-13T11:46:47+00:00

[ Upstream commit 9d6c0e58514f8b57cd9c2c755e41623d6a966025 ] Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b7) changes TSC counter reads per cpu, but left time diff global (from start of all cpus to end of all cpus), thus diff(time) is too large for a cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus `cpupower monitor` showing far less than actual cpu realtime frequency. /proc/cpuinfo shows frequency: cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz' ... processor : 171 cpu MHz : 4108.498 ... before fix (System 100% busy): | Mperf || Idle_Stats CPU| C0 | Cx | Freq || POLL | C1 | C2 171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00 after fix (System 100% busy): | Mperf || Idle_Stats CPU| C0 | Cx | Freq || POLL | C1 | C2 171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00 Fixes: c2adb1877b76 ("cpupower: Make TSC read per CPU for Mperf monitor") Signed-off-by: He Rongguang Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

tools/power turbostat: Fix Bzy_MHz documentation typo

2024-05-17T09:48:04+00:00

[ Upstream commit 0b13410b52c4636aacb6964a4253a797c0fa0d16 ] The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta The man page erroneously showed that TSC_delta was divided. Signed-off-by: Peng Liu Signed-off-by: Len Brown Signed-off-by: Sasha Levin

tools/power turbostat: Fix added raw MSR output

2024-05-17T09:48:03+00:00

[ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ] When using --Summary mode, added MSRs in raw mode always print zeros. Print the actual register contents. Example, with patch: note the added column: --add msr0x64f,u32,package,raw,REASON Where: 0x64F is MSR_CORE_PERF_LIMIT_REASONS Busy% Bzy_MHz PkgTmp PkgWatt CorWatt REASON 0.00 4800 35 1.42 0.76 0x00000000 0.00 4801 34 1.42 0.76 0x00000000 80.08 4531 66 108.17 107.52 0x08000000 98.69 4530 66 133.21 132.54 0x08000000 99.28 4505 66 128.26 127.60 0x0c000400 99.65 4486 68 124.91 124.25 0x0c000400 99.63 4483 68 124.90 124.25 0x0c000400 79.34 4481 41 99.80 99.13 0x0c000000 0.00 4801 41 1.40 0.73 0x0c000000 Where, for the test processor (i5-10600K): PKG Limit #1: 125.000 Watts, 8.000000 sec MSR bit 26 = log; bit 10 = status PKG Limit #2: 136.000 Watts, 0.002441 sec MSR bit 27 = log; bit 11 = status Example, without patch: Busy% Bzy_MHz PkgTmp PkgWatt CorWatt REASON 0.01 4800 35 1.43 0.77 0x00000000 0.00 4801 35 1.39 0.73 0x00000000 83.49 4531 66 112.71 112.06 0x00000000 98.69 4530 68 133.35 132.69 0x00000000 99.31 4500 67 127.96 127.30 0x00000000 99.63 4483 69 124.91 124.25 0x00000000 99.61 4481 69 124.90 124.25 0x00000000 99.61 4481 71 124.92 124.25 0x00000000 59.35 4479 42 75.03 74.37 0x00000000 0.00 4800 42 1.39 0.73 0x00000000 0.00 4801 42 1.42 0.76 0x00000000 c000000 [lenb: simplified patch to apply only to package scope] Signed-off-by: Doug Smythies Signed-off-by: Len Brown Signed-off-by: Sasha Levin