kernel/linux.git/tools/power, branch master

Merge tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

2026-04-20T19:02:24+00:00

Pull x86 platform driver updates from Ilpo Järvinen: "asus-wmi: - Retain battery charge threshold during boot which avoids unsolicited change to 100%. Return -ENODATA when the limit is not yet known - Improve screenpad power/brightness handling consistency - Fix screenpad brightness range barco-p50-gpio: - Normalize gpio_get return values bitland-mifs-wmi: - Add driver for Bitland laptops (supports platform profile, hwmon, kbd backlight, gpu mode, hotkeys, and fan boost) dell_rbu: - Fix using uninitialized value in sysfs write function dell-wmi-sysman: - Respect destination length when constructing enum strings hp-wmi: - Propagate fan setting apply failures and log an error - Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock - Correct keepalive schedule_delayed_work() to mod_delayed_work() - Fix u8 underflows in GPU delta calculation - Use mutex to protect fan pwm/mode - Ignore kbd backlight and FnLock key events that are handled by FW - Fix fan table parsing (use correct field) - Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and Omen MAX 16-ak0xxxx input: trackpoint & thinkpad_acpi: - Enable doubletap by default and add sysfs enable/disable int3472: - Add support for GPIO type 0x02 (IR flood LED) intel-speed-select: (updated to v1.26) - Avoid using current base frequency as maximum - Fix CPU extended family ID decoding - Fix exit code - Improve error reporting intel/vsec: - Refactor to support ACPI-enumerated PMT endpoints. pcengines-apuv2: - Attach software node to the gpiochip uniwill: - Refactor hwmon to smaller parts to accomodate HW diversity - Support USB-C power/performance priority switch through sysfs - Add another XMG Fusion 15 (L19) DMI vendor - Enable fine-grained features to device lineup mapping wmi: - Perform output size check within WMI core to allow simpler WMI drivers misc: - acpi_driver -> platform driver conversions (a large number of changes from Rafael J. Wysocki) - cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits) platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77) platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44) platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87) platform/x86: hp-wmi: fix fan table parsing platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support platform/wmi: Replace .no_notify_data with .min_event_size platform/wmi: Extend wmidev_query_block() to reject undersized data platform/wmi: Extend wmidev_invoke_method() to reject undersized data platform/wmi: Prepare to reject undersized unmarshalling results platform/wmi: Convert drivers to use wmidev_invoke_procedure() platform/wmi: Add wmidev_invoke_procedure() platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED) platform/x86: int3472: Parameterize LED con_id in registration platform/x86: int3472: Rename pled to led in LED registration code platform/x86: int3472: Use local variable for LED struct access platform/x86: thinkpad_acpi: remove obsolete TODO comment platform/x86: dell-wmi-sysman: bound enumeration string aggregation platform/x86: hp-wmi: Ignore backlight and FnLock events platform/x86: uniwill-laptop: Fix signedness bug platform/x86: dell_rbu: avoid uninit value usage in packet_size_write() ...

Merge tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2026-04-14T02:47:52+00:00

Pull power management updates from Rafael Wysocki: "Once again, cpufreq is the most active development area, mostly because of the new feature additions and documentation updates in the amd-pstate driver, but there are also changes in the cpufreq core related to boost support and other assorted updates elsewhere. Next up are power capping changes due to the major cleanup of the Intel RAPL driver. On the cpuidle front, a new C-states table for Intel Panther Lake is added to the intel_idle driver, the stopped tick handling in the menu and teo governors is updated, and there are a couple of cleanups. Apart from the above, support for Tegra114 is added to devfreq and there are assorted cleanups of that code, there are also two updates of the operating performance points (OPP) library, two minor updates related to hibernation, and cpupower utility man pages updates and cleanups. Specifics: - Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa) - Update cpufreq-dt-platdev blocklist (Faruque Ansari) - Minor updates to driver and dt-bindings for Tegra (Thierry Reding, Rosen Penev) - Add MAINTAINERS entry for CPPC driver (Viresh Kumar) - Add support for new features: CPPC performance priority, Dynamic EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy, Mario Limonciello) - Fix sysfs files being present when HW missing and broken/outdated documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy) - Pass the policy to cpufreq_driver->adjust_perf() to avoid using cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which leads to a scheduling-while-atomic bug (K Prateek Nayak) - Clean up dead code in Kconfig for cpufreq (Julian Braha) - Remove max_freq_req update for pre-existing cpufreq policy and add a boost_freq_req QoS request to save the boost constraint instead of overwriting the last scaling_max_freq constraint (Pierre Gondois) - Embed cpufreq QoS freq_req objects in cpufreq policy so they all are allocated in one go along with the policy to simplify lifetime rules and avoid error handling issues (Viresh Kumar) - Use DMI max speed when CPPC is unavailable in the acpi-cpufreq scaling driver (Henry Tseng) - Switch policy_is_shared() in cpufreq to using cpumask_nth() instead of cpumask_weight() because the former is more efficient (Yury Norov) - Use sysfs_emit() in sysfs show functions for cpufreq governor attributes (Thorsten Blum) - Update intel_pstate to stop returning an error when "off" is written to its status sysfs attribute while the driver is already off (Fabio De Francesco) - Include current frequency in the debug message printed by __cpufreq_driver_target() (Pengjie Zhang) - Refine stopped tick handling in the menu cpuidle governor and rearrange stopped tick handling in the teo cpuidle governor (Rafael Wysocki) - Add Panther Lake C-states table to the intel_idle driver (Artem Bityutskiy) - Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha) - Simplify cpuidle_register_device() with guard() (Huisong Li) - Use performance level if available to distinguish between rates in OPP debugfs (Manivannan Sadhasivam) - Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar) - Return -ENODATA if the snapshot image is not loaded (Alberto Garcia) - Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric Biggers) - Clean up and rearrange the intel_rapl power capping driver to make the respective interface drivers (TPMI, MSR, and MMOI) hold their own settings and primitives and consolidate PL4 and PMU support flags into rapl_defaults (Kuppuswamy Sathyanarayanan) - Correct kernel-doc function parameter names in the power capping core code (Randy Dunlap) - Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko) - Use _visible attribute to replace create/remove_sysfs_files() in devfreq (Pengjie Zhang) - Add Tegra114 support to activity monitor device in tegra30-devfreq as a preparation to upcoming EMC controller support (Svyatoslav Ryhel) - Fix mistakes in cpupower man pages, add the boost and epp options to the cpupower-frequency-info man page, and add the perf-bias option to the cpupower-info man page (Roberto Ricci) - Remove unnecessary extern declarations from getopt.h in arguments parsing functions in cpufreq-set, cpuidle-info, cpuidle-set, cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)" * tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP cpupower: remove extern declarations in cmd functions cpuidle: Simplify cpuidle_register_device() with guard() PM / devfreq: tegra30-devfreq: add support for Tegra114 PM / devfreq: use _visible attribute to replace create/remove_sysfs_files() PM / devfreq: Remove unneeded casting for HZ_PER_KHZ MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer cpufreq: Pass the policy to cpufreq_driver->adjust_perf() cpufreq/amd-pstate: Pass the policy to amd_pstate_update() cpufreq/amd-pstate-ut: Add a unit test for raw EPP cpufreq/amd-pstate: Add support for raw EPP writes cpufreq/amd-pstate: Add support for platform profile class cpufreq/amd-pstate: add kernel command line to override dynamic epp cpufreq/amd-pstate: Add dynamic energy performance preference Documentation: amd-pstate: fix dead links in the reference section cpufreq/amd-pstate: Cache the max frequency in cpudata Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count} Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file amd-pstate-ut: Add a testcase to validate the visibility of driver attributes ...

Merge tag 'turbostat-fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

2026-04-10T15:36:32+00:00

Pull turbostat fixes from Len Brown: - Fix a memory allocation issue that could corrupt output values or SEGV - Fix a perf initilization issue that could exit on some HW + kernels - Minor fixes * tag 'turbostat-fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: Allow execution to continue after perf_l2_init() failure tools/power turbostat: Fix delimiter bug in print functions tools/power turbostat: Fix --show/--hide for individual cpuidle counters tools/power turbostat: Fix incorrect format variable tools/power turbostat: Consistently use print_float_value() tools/power/turbostat: Fix microcode patch level output for AMD/Hygon tools/power turbostat: Eliminate unnecessary data structure allocation tools/power turbostat: Fix swidle header vs data display tools/power turbostat: Fix illegal memory access when SMT is present and disabled

tools/power turbostat: Allow execution to continue after perf_l2_init() failure

2026-04-10T13:04:32+00:00

Currently, if perf_l2_init() fails turbostat exits after issuing the following error (which was encountered on AlderLake): turbostat: perf_l2_init(cpu0, 0x0, 0xff24) REFS: Invalid argument This occurs because perf_l2_init() calls err(). However, the code has been written in such a manner that it is able to perform cleanup and continue. Therefore, this issue can be addressed by changing the appropriate calls to err() to warnx(). Additionally, correct the PMU type arguments passed to the warning strings in the ecore and lcore blocks so the logs accurately reflect the failing counter type. Signed-off-by: David Arcari Signed-off-by: Len Brown

cpupower: remove extern declarations in cmd functions

2026-04-06T17:25:32+00:00

extern char *optarg and extern int optind, opterr, optopt are already declared by , which is included at the top of the file. Repeating extern declarations inside a function body is misleading and unnecessary. Signed-off-by: Kaushlendra Kumar Signed-off-by: Shuah Khan

tools/power/x86/intel-speed-select: v1.26 release

2026-04-05T18:54:25+00:00

This version includes the following changes: - Setting current base frequency as maximum for SST-BF with kernel QOS changes - Harmonize extended family decoded with the rest of the kernel - Minor changes for error codes and messages Signed-off-by: Srinivas Pandruvada

tools/power/x86/intel-speed-select: Fix output when running on unsupported CLX platforms

2026-04-05T18:48:17+00:00

When running intel-speed-select on unsupported CLX platforms, it prints intel-speed-select: Invalid CPU model (85) : Success Because this is not a system error and errno is not set. Replace err() with exit(). Signed-off-by: Zhang Rui Signed-off-by: Srinivas Pandruvada

tools/power/x86/intel-speed-select: Print Version info when Incompatible API version is detected

2026-04-05T18:47:19+00:00

When running an old version intel-speed-select tool on newer platforms, even with "intel-speed-select -v", the tool only complains about "Incompatible API version", without giving the current version info. Print Version info whenever Incompatible API version is detected. Signed-off-by: Zhang Rui Signed-off-by: Srinivas Pandruvada

tools/power/x86/intel-speed-select: Fix some program return value

2026-04-05T18:46:21+00:00

When running the "intel-speed-select -h" command, it returns 1. 0 when using a version that is API incompatible. 2. 1 when using a version that is API compatible. And this is confusing. Fix the program to return 0 for "-h" parameter, and return 1 whenever "Incompatible API versions" is detected. Signed-off-by: Zhang Rui Signed-off-by: Srinivas Pandruvada

tools/power/x86/intel-speed-select: Fix cpu extended family ID decoding

2026-04-05T18:44:38+00:00

When decode and use CPU extended family ID in intel-speed-select, there are several potential issues, 1. Mask with 0x0f to get CPU extended family ID is bogus because CPU extended family ID takes 8 bits (bit 27:20). 2. Use CPU extended family ID fields without checking CPU family ID is risky. Because Intel SDM says, "The Extended Family ID needs to be examined only when the Family ID is 0FH." 3. Saving cpu family ID and cpu extended family ID separately doesn't align with Linux kernel. And it may bring extra complexity when making family specific changes in the future. Signed-off-by: Zhang Rui Signed-off-by: Srinivas Pandruvada