kernel/linux.git/tools/power/cpupower/utils, branch v6.1.174

pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()

2025-08-28T14:25:54+00:00

[ Upstream commit cda7ac8ce7de84cf32a3871ba5f318aa3b79381e ] In the function mperf_start(), mperf_monitor snapshots the time, tsc and finally the aperf,mperf MSRs. However, this order of snapshotting in is reversed in mperf_stop(). As a result, the C0 residency (which is computed as delta_mperf * 100 / delta_tsc) is under-reported on CPUs that is 100% busy. Fix this by snapshotting time, tsc and then aperf,mperf in mperf_stop() in the same order as in mperf_start(). Link: https://lore.kernel.org/r/20250612122355.19629-2-gautham.shenoy@amd.com Signed-off-by: Gautham R. Shenoy Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

cpupower: fix TSC MHz calculation

2025-02-21T12:49:00+00:00

[ Upstream commit 9d6c0e58514f8b57cd9c2c755e41623d6a966025 ] Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b7) changes TSC counter reads per cpu, but left time diff global (from start of all cpus to end of all cpus), thus diff(time) is too large for a cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus `cpupower monitor` showing far less than actual cpu realtime frequency. /proc/cpuinfo shows frequency: cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz' ... processor : 171 cpu MHz : 4108.498 ... before fix (System 100% busy): | Mperf || Idle_Stats CPU| C0 | Cx | Freq || POLL | C1 | C2 171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00 after fix (System 100% busy): | Mperf || Idle_Stats CPU| C0 | Cx | Freq || POLL | C1 | C2 171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00 Fixes: c2adb1877b76 ("cpupower: Make TSC read per CPU for Mperf monitor") Signed-off-by: He Rongguang Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs

2024-07-25T07:49:08+00:00

[ Upstream commit 43cad521c6d228ea0c51e248f8e5b3a6295a2849 ] Update cpupower's P-State frequency calculation and reporting with AMD Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due to a change in the PStateDef MSR layout in AMD Family 1Ah+. Tested on 4th and 5th Gen AMD EPYC system Signed-off-by: Ananth Narayan Signed-off-by: Dhananjay Ugwekar Reviewed-by: Mario Limonciello Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

cpupower: Make TSC read per CPU for Mperf monitor

2023-05-24T16:32:43+00:00

[ Upstream commit c2adb1877b76fc81ae041e1db1a6ed2078c6746b ] System-wide TSC read could cause a drift in C0 percentage calculation. Because if first TSC is read and then one by one mperf is read for all cpus, this introduces drift between mperf reading of later CPUs and TSC reading. To lower this drift read TSC per CPU and also just after mperf read. This technique improves C0 percentage calculation in Mperf monitor. Before fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00 After fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00 0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 Cc: Thomas Renninger Cc: Shuah Khan Cc: Dominik Brodowski Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Wyes Karny Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

cpupower: Add "perf" option to print AMD P-State information

2022-02-24T00:46:21+00:00

Add "-c --perf" option in cpupower-frequency-info to get the performance and frequency values for AMD P-State. Commit message amended: Shuah Khan Reviewed-by: Shuah Khan Signed-off-by: Huang Rui Signed-off-by: Shuah Khan

cpupower: Add function to print AMD P-State performance capabilities

2022-02-23T01:37:12+00:00

AMD P-State kernel module is using the fine grain frequency instead of acpi hardware pstate. So add a function to print performance and frequency values. Reviewed-by: Shuah Khan Signed-off-by: Huang Rui Signed-off-by: Shuah Khan

cpupower: Move print_speed function into misc helper

2022-02-23T01:37:07+00:00

The print_speed can be as a common function, and expose it into misc helper header. Then it can be used on other helper files as well. Reviewed-by: Shuah Khan Signed-off-by: Huang Rui Signed-off-by: Shuah Khan

cpupower: Enable boost state support for AMD P-State module

2022-02-23T01:37:01+00:00

The legacy ACPI hardware P-States function has 3 P-States on ACPI table, the CPU frequency only can be switched between the 3 P-States. While the processor supports the boost state, it will have another boost state that the frequency can be higher than P0 state, and the state can be decoded by the function of decode_pstates() and read by amd_pci_get_num_boost_states(). However, the new AMD P-State function is different than legacy ACPI hardware P-State on AMD processors. That has a finer grain frequency range between the highest and lowest frequency. And boost frequency is actually the frequency which is mapped on highest performance ratio. The similar previous P0 frequency is mapped on nominal performance ratio. If the highest performance on the processor is higher than nominal performance, then we think the current processor supports the boost state. And it uses amd_pstate_boost_init() to initialize boost for AMD P-State function. Reviewed-by: Shuah Khan Signed-off-by: Huang Rui Signed-off-by: Shuah Khan

cpupower: Add AMD P-State sysfs definition and access helper

2022-02-23T01:36:55+00:00

Introduce the marco definitions and access helper function for AMD P-State sysfs interfaces such as each performance goals and frequency levels in amd helper file. They will be used to read the sysfs attribute from AMD P-State cpufreq driver for cpupower utilities. Reviewed-by: Shuah Khan Signed-off-by: Huang Rui Signed-off-by: Shuah Khan

cpupower: Initial AMD P-State capability

2022-02-23T01:36:39+00:00

If kernel starts the AMD P-State module, the cpupower will initial the capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State capability is set, it won't need to set legacy ACPI relative capabilities anymore. Reviewed-by: Shuah Khan Signed-off-by: Huang Rui Signed-off-by: Shuah Khan