kernel/linux.git/tools/perf/util/stat.h, branch v6.6.133

perf stat: Show average value on multiple runs

2023-06-16T13:17:45+00:00

When -r option is used, perf stat runs the command multiple times and update stats in the evsel->stats.res_stats for global aggregation. But the value is never used and the value it prints at the end is just the value from the last run. I think we should print the average number of multiple runs. Add evlist__copy_res_stats() to update the aggr counter (for display) using the values in the evsel->stats.res_stats. Signed-off-by: Namhyung Kim Cc: Adrian Hunter Cc: Andi Kleen Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20230616073211.1057936-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf stat: New metricgroup output for the default mode

2023-06-16T12:57:19+00:00

In the default mode, the current output of the metricgroup include both events and metrics, which is not necessary and just makes the output hard to read. Since different ARCHs (even different generations in the same ARCH) may use different events. The output also vary on different platforms. For a metricgroup, only outputting the value of each metric is good enough. Add a new field default_metricgroup in evsel to indicate an event of the default metricgroup. For those events, printout() should print the metricgroup name rather than each event. Add perf_stat__skip_metric_event() to skip the evsel in the Default metricgroup, if it's not running or not the metric event. Add print_metricgroup_header_t to pass the functions which print the display name of each metricgroup in the Default metricgroup. Support all three output methods. Factor out perf_stat__print_shadow_stats_metricgroup() to print out each metrics. On SPR: Before: ./perf_old stat sleep 1 Performance counter stats for 'sleep 1': 0.54 msec task-clock:u # 0.001 CPUs utilized 0 context-switches:u # 0.000 /sec 0 cpu-migrations:u # 0.000 /sec 68 page-faults:u # 125.445 K/sec 540,970 cycles:u # 0.998 GHz 556,325 instructions:u # 1.03 insn per cycle 123,602 branches:u # 228.018 M/sec 6,889 branch-misses:u # 5.57% of all branches 3,245,820 TOPDOWN.SLOTS:u # 18.4 % tma_backend_bound # 17.2 % tma_retiring # 23.1 % tma_bad_speculation # 41.4 % tma_frontend_bound 564,859 topdown-retiring:u 1,370,999 topdown-fe-bound:u 603,271 topdown-be-bound:u 744,874 topdown-bad-spec:u 12,661 INT_MISC.UOP_DROPPING:u # 23.357 M/sec 1.001798215 seconds time elapsed 0.000193000 seconds user 0.001700000 seconds sys After: $ ./perf stat sleep 1 Performance counter stats for 'sleep 1': 0.51 msec task-clock:u # 0.001 CPUs utilized 0 context-switches:u # 0.000 /sec 0 cpu-migrations:u # 0.000 /sec 68 page-faults:u # 132.683 K/sec 545,228 cycles:u # 1.064 GHz 555,509 instructions:u # 1.02 insn per cycle 123,574 branches:u # 241.120 M/sec 6,957 branch-misses:u # 5.63% of all branches TopdownL1 # 17.5 % tma_backend_bound # 22.6 % tma_bad_speculation # 42.7 % tma_frontend_bound # 17.1 % tma_retiring TopdownL2 # 21.8 % tma_branch_mispredicts # 11.5 % tma_core_bound # 13.4 % tma_fetch_bandwidth # 29.3 % tma_fetch_latency # 2.7 % tma_heavy_operations # 14.5 % tma_light_operations # 0.8 % tma_machine_clears # 6.1 % tma_memory_bound 1.001712086 seconds time elapsed 0.000151000 seconds user 0.001618000 seconds sys Reviewed-by: Ian Rogers Signed-off-by: Kan Liang Cc: Adrian Hunter Cc: Ahmad Yasin Cc: Andi Kleen Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: https://lore.kernel.org/r/20230616031420.3751973-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Setup the foundation to allow aggregation based on cache topology

2023-05-23T19:08:08+00:00

Processors based on chiplet architecture, such as AMD EPYC and Hygon do not expose the chiplet details in the sysfs CPU topology information. However, this information can be derived from the per CPU cache level information from the sysfs. 'perf stat' has already supported aggregation based on topology information using core ID, socket ID, etc. It'll be useful to aggregate based on the cache topology to detect problems like imbalance and cache-to-cache sharing at various cache levels. This patch lays the foundation for aggregating data in 'perf stat' based on the processor's cache topology. The cmdline option to aggregate data based on the cache topology is added in Patch 4 of the series while this patch sets up all the necessary functions and variables required to support the new aggregation option. The patch also adds support to display per-cache aggregation, or save it as a JSON or CSV, as splitting it into a separate patch would break builds when compiling with "-Werror=switch-enum" where the compiler will complain about the lack of handling for the AGGR_CACHE case in the output functions. Committer notes: Don't use perf_stat_config in tools/perf/util/cpumap.c, this would make code that is in util/, thus not really specific to a single builtin, use a specific builtin config structure. Move the functions introduced in this patch from tools/perf/util/cpumap.c since it needs access to builtin specific and is not strictly needed to live in the util/ directory. With this 'perf test python' is back building. Suggested-by: Gautham Shenoy Signed-off-by: K Prateek Nayak Acked-by: Ian Rogers Cc: Alexander Shishkin Cc: Ananth Narayan Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Sandipan Das Cc: Stephane Eranian Cc: Wen Pu Link: https://lore.kernel.org/r/20230517172745.5833-3-kprateek.nayak@amd.com Signed-off-by: Arnaldo Carvalho de Melo

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

2023-03-10T21:43:17+00:00

To pick up perf-tools fixes just merged upstream. Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Fix counting when initial delay configured

2023-03-02T20:39:03+00:00

When creating counters with initial delay configured, the enable_on_exec field is not set. So we need to enable the counters later. The problem is, when a workload is specified the target__none() is true. So we also need to check stat_config.initial_delay. In this change, we add a new field 'initial_delay' for struct target which could be shared by other subcommands. And define target__enable_on_exec() which returns whether enable_on_exec should be set on normal cases. Before this fix the event is not counted: $ ./perf stat -e instructions -D 100 sleep 2 Events disabled Events enabled Performance counter stats for 'sleep 2': instructions 1.901661124 seconds time elapsed 0.001602000 seconds user 0.000000000 seconds sys After fix it works: $ ./perf stat -e instructions -D 100 sleep 2 Events disabled Events enabled Performance counter stats for 'sleep 2': 404,214 instructions 1.901743475 seconds time elapsed 0.001617000 seconds user 0.000000000 seconds sys Fixes: c587e77e100fa40e ("perf stat: Do not delay the workload with --delay") Signed-off-by: Changbin Du Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: Hui Wang Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20230302031146.2801588-2-changbin.du@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Remove saved_value/runtime_stat

2023-02-19T11:10:25+00:00

As saved_value/runtime_stat are only written to and not read, remove the associated logic and writes. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexandre Torgue Cc: Andrii Nakryiko Cc: Athira Rajeev Cc: Caleb Biggers Cc: Eduard Zingerman Cc: Florian Fischer Cc: Ingo Molnar Cc: James Clark Cc: Jing Zhang Cc: Jiri Olsa Cc: John Garry Cc: Kajol Jain Cc: Kan Liang Cc: Leo Yan Cc: Mark Rutland Cc: Maxime Coquelin Cc: Namhyung Kim Cc: Perry Taylor Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Sandipan Das Cc: Sean Christopherson Cc: Stephane Eranian Cc: Suzuki Poulouse Cc: Xing Zhengjun Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20230219092848.639226-52-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Add cpu_aggr_map for loop

2023-02-19T11:10:25+00:00

Rename variables, add a comment and add a cpu_aggr_map__for_each_idx to aid the readability of the stat-display code. In particular, try to make sure aggr_idx is used consistently to differentiate from other kinds of index. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexandre Torgue Cc: Andrii Nakryiko Cc: Athira Rajeev Cc: Caleb Biggers Cc: Eduard Zingerman Cc: Florian Fischer Cc: Ingo Molnar Cc: James Clark Cc: Jing Zhang Cc: Jiri Olsa Cc: John Garry Cc: Kajol Jain Cc: Kan Liang Cc: Leo Yan Cc: Mark Rutland Cc: Maxime Coquelin Cc: Namhyung Kim Cc: Perry Taylor Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Sandipan Das Cc: Sean Christopherson Cc: Stephane Eranian Cc: Suzuki Poulouse Cc: Xing Zhengjun Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20230219092848.639226-49-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Hide runtime_stat

2023-02-19T11:10:25+00:00

runtime_stat is only shared for the sake of tests that don't care about its value. Move the definition into stat-shadow.c and have the tests also use the global version. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexandre Torgue Cc: Andrii Nakryiko Cc: Athira Rajeev Cc: Caleb Biggers Cc: Eduard Zingerman Cc: Florian Fischer Cc: Ingo Molnar Cc: James Clark Cc: Jing Zhang Cc: Jiri Olsa Cc: John Garry Cc: Kajol Jain Cc: Kan Liang Cc: Leo Yan Cc: Mark Rutland Cc: Maxime Coquelin Cc: Namhyung Kim Cc: Perry Taylor Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Sandipan Das Cc: Sean Christopherson Cc: Stephane Eranian Cc: Suzuki Poulouse Cc: Xing Zhengjun Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20230219092848.639226-48-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Move enums from header

2023-02-19T11:10:24+00:00

The enums are only used in stat-shadow.c, so narrow their scope by moving to the C file. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexandre Torgue Cc: Andrii Nakryiko Cc: Athira Rajeev Cc: Caleb Biggers Cc: Eduard Zingerman Cc: Florian Fischer Cc: Ingo Molnar Cc: James Clark Cc: Jing Zhang Cc: Jiri Olsa Cc: John Garry Cc: Kajol Jain Cc: Kan Liang Cc: Leo Yan Cc: Mark Rutland Cc: Maxime Coquelin Cc: Namhyung Kim Cc: Perry Taylor Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Sandipan Das Cc: Sean Christopherson Cc: Stephane Eranian Cc: Suzuki Poulouse Cc: Xing Zhengjun Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20230219092848.639226-47-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Remove perf_stat_evsel_id

2023-02-19T11:10:24+00:00

perf_stat_evsel_id was used for hard coded metrics. These have now migrated to json metrics and so the id values are no longer necessary. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexandre Torgue Cc: Andrii Nakryiko Cc: Athira Rajeev Cc: Caleb Biggers Cc: Eduard Zingerman Cc: Florian Fischer Cc: Ingo Molnar Cc: James Clark Cc: Jing Zhang Cc: Jiri Olsa Cc: John Garry Cc: Kajol Jain Cc: Kan Liang Cc: Leo Yan Cc: Mark Rutland Cc: Maxime Coquelin Cc: Namhyung Kim Cc: Perry Taylor Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Sandipan Das Cc: Sean Christopherson Cc: Stephane Eranian Cc: Suzuki Poulouse Cc: Xing Zhengjun Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20230219092848.639226-46-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo