kernel/linux.git/tools/perf/tests/attr.py, branch v6.1.168

perf script python: Add Python3 support to tests/attr.py

2019-01-25T14:12:10+00:00

Support both Python 2 and Python 3 in tests/attr.py The use of "except as" syntax implies the minimum supported Python2 version is now v2.6 Committer testing: $ make -C tools/perf PYTHON3=python install-bin Before: # perf test attr 16: Setup struct perf_event_attr : FAILED! 48: Synthesize attr update : Ok [root@quaco ~]# perf test -v attr 16: Setup struct perf_event_attr : --- start --- test child forked, pid 3121 File "/home/acme/libexec/perf-core/tests/attr.py", line 324 except Unsup, obj: ^ SyntaxError: invalid syntax test child finished with -1 ---- end ---- Setup struct perf_event_attr: FAILED! 48: Synthesize attr update : --- start --- test child forked, pid 3124 test child finished with 0 ---- end ---- Synthesize attr update: Ok # After: # perf test attr 16: Setup struct perf_event_attr : Ok 48: Synthesize attr update : Ok # Signed-off-by: Tony Jones Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Jonathan Corbet Cc: Ravi Bangoria Cc: Seeteena Thoufeek Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo

perf script python: Remove explicit shebang from tests/attr.c

2019-01-25T14:12:10+00:00

tests/attr.c invokes attr.py via an explicit invocation of Python ($PYTHON) so there is therefore no need for an explicit shebang. Also most distros follow pep-0394 which recommends that /usr/bin/python refer only to v2 and so may not exist on the system (if PYTHON=python3). Signed-off-by: Tony Jones Acked-by: Jiri Olsa Cc: Jonathan Corbet Cc: Ravi Bangoria Cc: Seeteena Thoufeek Link: http://lkml.kernel.org/r/20190124005229.16146-5-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo

perf test: Fix perf_event_attr test failure

2018-12-17T17:54:32+00:00

Fix inconsistent use of tabs and spaces error: # perf test 16 -v 16: Setup struct perf_event_attr : --- start --- test child forked, pid 20224 File "/usr/libexec/perf-core/tests/attr.py", line 119 log.warning("expected %s=%s, got %s" % (t, self[t], other[t])) ^ TabError: inconsistent use of tabs and spaces in indentation test child finished with -1 ---- end ---- Setup struct perf_event_attr: FAILED! Signed-off-by: Adrian Hunter Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

Merge branch 'linus' into perf/core, to fix conflicts

2017-11-07T09:30:18+00:00

Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

perf test attr: Fix python error on empty result

2017-10-02T17:00:20+00:00

Commit d78ada4a767 ("perf tests attr: Do not store failed events") does not create an event file in the /tmp directory when the perf_open_event() system call failed. This can lead to a situation where not /tmp/event-xx-yy-zz result file exists at all (for example on a s390x virtual machine environment) where no CPUMF hardware is available. The following command then fails with a python call back chain instead of printing failure: [root@s8360046 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \ -p ./perf -v -ttest-stat-basic running './tests/attr//test-stat-basic' Traceback (most recent call last): File "./tests/attr.py", line 379, in main() File "./tests/attr.py", line 370, in main run_tests(options) File "./tests/attr.py", line 311, in run_tests Test(f, options).run() File "./tests/attr.py", line 300, in run self.compare(self.expect, self.result) File "./tests/attr.py", line 248, in compare exp_event.diff(res_event) UnboundLocalError: local variable 'res_event' referenced before assignment [root@s8360046 perf]# This patch catches this pitfall and prints an error message instead: [root@s8360047 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \ -p ./perf -vvv -ttest-stat-basic running './tests/attr//test-stat-basic' loading expected events Event event:base-stat fd = 1 group_fd = -1 flags = 0|8 [....] sample_regs_user = 0 sample_stack_user = 0 'PERF_TEST_ATTR=/tmp/tmpJbMQMP ./perf stat -o /tmp/tmpJbMQMP/perf.data -e cycles kill >/dev/null 2>&1' ret '1', expected '1' loading result events compare matching [event:base-stat] match: [event:base-stat] matches [] res_event is empty FAILED './tests/attr//test-stat-basic' - match failure [root@s8360047 perf]# Signed-off-by: Thomas-Mich Richter Acked-by: Jiri Olsa Cc: Heiko Carstens Cc: Hendrik Brueckner Cc: Martin Schwidefsky Cc: Thomas-Mich Richter LPU-Reference: 20170913081209.39570-1-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-04d63nn7svfgxdhi60gq2mlm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tests attr: Add optional term

2017-07-19T02:14:22+00:00

Some of the stat events are quite rare to find on common machines (like front end cycles). Adding an 'optional' term to mark such events in attr tests. Event marked as optional will not fail the test case if it's not found in results. Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Link: http://lkml.kernel.org/r/20170703145030.12903-15-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tests attr: Rename compare_data to data_equal

2017-07-19T02:14:16+00:00

The data_equal name fits better to the return value of the function. It's true when the data is equal. Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Link: http://lkml.kernel.org/r/20170703145030.12903-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tests attr: Make compare_data global

2017-07-19T02:14:16+00:00

Making compare_data global, so it could be used outside the Test class scope to compare command results. Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Link: http://lkml.kernel.org/r/20170703145030.12903-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tests: Add platform dependency to test 15

2017-06-27T00:42:00+00:00

This patch adds platform dependency into the test case 15 (perf_event_attr). It is based on a suggestion from Jiri Olsa. Add a new optional attribute named 'arch' in the [config] section of the test case file. It is a comma separated list of architecture names this test can be executed on. For example: arch = x86_64,alpha,ppc If this attribute is missing the test is executed on any platform. This does not break existing behavior. The values listed for this attribute should be identical to uname -m output. If the list starts with an exclamation mark (!) the comparison is inverted, for example for arch = !s390x,ppc the test is not executed on s390x or ppc platforms. The exclamation mark must be at the beginnning of the list. Here is an example debug output: [root@s35lp76]# fgrep arch tests/attr/test-stat-C2 arch = x86_64,alpha,ppc [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \ -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1 provides the following output: running './tests/attr//test-stat-C1' test limitation 'x86_64,alpha,ppc' <--- new loading expected events Event event:base-stat fd = 1 group_fd = -1 ..... Here is the output when a test is skipped: [root@s35lp76]# fgrep arch tests/attr/test-stat-C1 arch = !s390x [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \ -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1 provides the following output: test limitation '!s390x' <--- new skipped [s390x] './tests/attr//test-stat-C1' <--- new The test is skipped with return code 0. Suggested-and-Acked-by: Jiri Olsa Reviewed-by: Arnaldo Carvalho de Melo Signed-off-by: Thomas Richter Cc: Hendrik Brueckner Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/20170622073625.86762-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo