kernel/linux.git/tools/perf/command-list.txt, branch v5.19

perf stat: Enable iostat mode for x86 platforms

2021-04-20T11:40:20+00:00

This functionality is based on recently introduced sysfs attributes for Intel® Xeon® Scalable processor family (code name Skylake-SP): Commit bb42b3d39781d7fc ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping") Mode is intended to provide four I/O performance metrics in MB per each PCIe root port: - Inbound Read: I/O devices below root port read from the host memory - Inbound Write: I/O devices below root port write to the host memory - Outbound Read: CPU reads from I/O devices below root port - Outbound Write: CPU writes to I/O devices below root port Each metric requiries only one uncore event which increments at every 4B transfer in corresponding direction. The formulas to compute metrics are generic: #EventCount * 4B / (1024 * 1024) Acked-by: Namhyung Kim Signed-off-by: Alexander Antonov Cc: Alexander Shishkin Cc: Alexey V Bayduraev Cc: Andi Kleen Cc: Arnaldo Carvalho de Melo Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf daemon: Add daemon command

2021-02-09T18:42:57+00:00

Add a daemon skeleton with a minimal base (non) functionality, covering various setup in start command. Add an initial perf-daemon.txt with basic info. This is in response to pople asking for the possibility to be able run record long running sessions on the background. The patchset that starts with this adds support to configure and run record sessions on background via new 'perf daemon' command. This is useful for being able to use perf as a flight recorder that one can interact with asking for events to be enabled or disabled, added or removed, etc. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Alexei Budankov Cc: Arnaldo Carvalho de Melo Cc: Ian Rogers Cc: Ingo Molnar Cc: Mark Rutland Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20210208200908.1019149-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf help: Add missing subcommand `version`

2018-09-19T17:53:36+00:00

There isn't subcommand `version` when typing `perf help`. Before : $ perf help | grep version usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS] So add perf-version in command-list.txt for listing it when typing `perf help`. After : $ perf help | grep version usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS] version display the version of perf binary Signed-off-by: Sangwon Hong Tested-by: Arnaldo Carvalho de Melo Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20180919074911.41931-1-qpakzk@gmail.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Missing c2c command in command-list

2017-03-13T13:59:31+00:00

Add the c2c command to command-list.txt so perf help can list this command. Committer notes: Before: # perf help | grep c2c # After: # perf help | grep c2c c2c Shared Data C2C/HITM Analyzer. # Signed-off-by: Changbin Du Tested-by: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20170313082845.23373-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf ftrace: Introduce new 'ftrace' tool

2017-01-26T14:43:01+00:00

The 'perf ftrace' command is a simple wrapper of kernel's ftrace functionality. It only supports single thread tracing currently and just reads trace_pipe in text and then write it to stdout. Committer notes: Testing it: # perf ftrace -f function_graph usleep 123456 2) | SyS_nanosleep() { 2) | _copy_from_user() { 2) 0.900 us | } 2) 1.354 us | } 2) | hrtimer_nanosleep() { 2) 0.062 us | __hrtimer_init(); 2) | do_nanosleep() { 2) | hrtimer_start_range_ns() { 2) 5.025 us | } 2) | schedule() { 2) 0.125 us | rcu_note_context_switch(); 2) 0.057 us | _raw_spin_lock(); 2) | deactivate_task() { 2) 0.369 us | update_rq_clock.part.77(); 2) | dequeue_task_fair() { 2) + 22.453 us | } 2) + 23.736 us | } 2) | pick_next_task_fair() { 2) + 47.167 us | } 2) | pick_next_task_idle() { 2) 4.462 us | } ------------------------------------------ 2) usleep-20387 => -0 ------------------------------------------ 2) 0.806 us | switch_mm_irqs_off(); ------------------------------------------ 2) -0 => usleep-20387 ------------------------------------------ 2) 0.151 us | finish_task_switch(); 2) @ 123597.2 us | } 2) 0.037 us | _cond_resched(); 2) | hrtimer_try_to_cancel() { 2) 0.064 us | hrtimer_active(); 2) 0.353 us | } 2) @ 123605.3 us | } 2) @ 123606.2 us | } 2) @ 123608.3 us | } /* SyS_nanosleep */ 2) | __do_page_fault() { Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Tested-by: Masami Hiramatsu Cc: Frederic Weisbecker Cc: Jeremy Eder Cc: Jiri Olsa , Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Steven Rostedt Link: http://lkml.kernel.org/n/tip-r1hgmsj4dxny8arn3o9mw512@git.kernel.org [ Various foward port fixes, add man page ] Signed-off-by: Arnaldo Carvalho de Melo

perf kallsyms: Introduce tool to look for extended symbol information on the running kernel

2017-01-11T19:48:01+00:00

Its similar to doing grep on a /proc/kallsyms, but it also shows extra information like the path to the kernel module and the unrelocated addresses in it, to help in diagnosing problems. It is also helps demonstrate the use of the symbols routines so that tool writers can use them more effectively. Using it: $ perf kallsyms e1000_xmit_frame netif_rx usb_stor_set_xfer_buf e1000_xmit_frame: [e1000e] /lib/modules/4.9.0+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko 0xffffffffc046fc10-0xffffffffc0470bb0 (0x19c80-0x1ac20) netif_rx: [kernel] [kernel.kallsyms] 0xffffffff916f03a0-0xffffffff916f0410 (0xffffffff916f03a0-0xffffffff916f0410) usb_stor_set_xfer_buf: [usb_storage] /lib/modules/4.9.0+/kernel/drivers/usb/storage/usb-storage.ko 0xffffffffc057aea0-0xffffffffc057af19 (0xf10-0xf89) $ Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Masami Hiramatsu Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-79bk9pakujn4l4vq0f90klv3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Do not show trace command if it's not compiled in

2016-01-08T15:46:17+00:00

The trace command still appears in help message when you run simple 'perf' command. It's because the generate-cmdlist.sh does not care about the HAVE_LIBAUDIT_SUPPORT dependency of trace command and puts it into generated common_cmds array. Wrapping trace command under HAVE_LIBAUDIT_SUPPORT dependency, which will exclude it from common_cmds array if HAVE_LIBAUDIT_SUPPORT is not set. Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Adrian Hunter Cc: David Ahern Cc: Namhyung Kim Cc: Noel Grandin Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1452158050-28061-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add 'perf config' command

2015-11-23T21:31:24+00:00

The perf configuration file contains many variables to change various aspects of each of its tools, including output, disk usage, etc. But looking at the state of configuration is difficult and there's no documentation about config variables except for the variables in perfconfig.example exist. So this patch adds a 'perf-config' command with a '--list' option. perf config [options] display current perf config variables. # perf config -l | --list Signed-off-by: Taeung Song Acked-by: Namhyung Kim Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1447768424-17327-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add new 'perf data' command

2015-02-25T15:42:25+00:00

Adding new 'perf data' command to provide operations over data files. The 'perf data convert' sub command is coming in following patch, but there's possibility for other useful commands like 'perf data ls' (to display perf data file in directory in ls style). Signed-off-by: Jiri Olsa Acked-by: Namhyung Kim Reviewed-by: David Ahern Cc: Frederic Weisbecker Cc: Jeremie Galarneau Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Tom Zanussi Cc: Wang Nan Link: http://lkml.kernel.org/r/1424470628-5969-3-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add new mem command for memory access profiling

2013-04-01T15:21:44+00:00

This new command is a wrapper on top of perf record and perf report to make it easier to configure for memory access profiling. To record loads: $ perf mem -t load rec ..... To record stores: $ perf mem -t store rec ..... To get the report: $ perf mem -t load rep Signed-off-by: Stephane Eranian Cc: Andi Kleen Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1359040242-8269-15-git-send-email-eranian@google.com [ Fixed minor conflict with 66857b5 "Sort command-list.txt alphabetically" ] Signed-off-by: Arnaldo Carvalho de Melo