kernel/linux.git/tools/lib/bpf/Makefile, branch v4.18.2

libbpf: Install btf.h with libbpf

2018-05-27T22:25:32+00:00

install_headers target should contain all headers that are part of libbpf. Add missing btf.h Signed-off-by: Andrey Ignatov Acked-by: Martin KaFai Lau Acked-by: Song Liu Signed-off-by: Daniel Borkmann

tools: bpf: move the event reading loop to libbpf

2018-05-10T23:40:52+00:00

There are two copies of event reading loop - in bpftool and trace_helpers "library". Consolidate them and move the code to libbpf. Return codes from trace_helpers are kept, but renamed to include LIBBPF prefix. Suggested-by: Alexei Starovoitov Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Signed-off-by: Daniel Borkmann

tools: add netlink.h and if_link.h in tools uapi

2018-02-03T01:53:47+00:00

The headers are necessary for libbpf compilation on system with older version of the headers. Signed-off-by: Eric Leblond Signed-off-by: Alexei Starovoitov

libbpf: Makefile set specified permission mode

2018-01-17T00:18:10+00:00

The third parameter to do_install was not used by $(INSTALL) command. Fix this by only setting the -m option when the third parameter is supplied. The use of a third parameter was introduced in commit eb54e522a000 ("bpf: install libbpf headers on 'make install'"). Without this change, the header files are install as executables files (755). Fixes: eb54e522a000 ("bpf: install libbpf headers on 'make install'") Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann

libbpf: cleanup Makefile, remove unused elements

2018-01-17T00:18:10+00:00

The plugin_dir_SQ variable is not used, remove it. The function update_dir is also unused, remove it. The variable $VERSION_FILES is empty, remove it. These all originates from the introduction of the Makefile, and is likely a copy paste from tools/lib/traceevent/Makefile. Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann

libbpf: install the header file libbpf.h

2018-01-17T00:18:10+00:00

It seems like an oversight not to install the header file for libbpf, given the libbpf.so + libbpf.a files are installed. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann

libbpf: fix Makefile exit code if libelf not found

2017-12-17T19:40:29+00:00

/bin/sh's exit does not recognize -1 as a number, leading to the following error message: /bin/sh: 1: exit: Illegal number: -1 Use 1 as the exit code. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Signed-off-by: Daniel Borkmann

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2017-09-06T21:45:08+00:00

Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...

tools lib bpf: Fix double file test in Makefile

2017-08-17T19:39:14+00:00

The Makefile verifies the same file exists twice: test -f ../../../include/uapi/linux/bpf.h -a \ -f ../../../include/uapi/linux/bpf.h The purpose of the check is to ensure the diff (immediately after the test) doesn't fail with these two files: tools/include/uapi/linux/bpf.h include/uapi/linux/bpf.h Same recipe for bpf_common: test -f ../../../include/uapi/linux/bpf_common.h -a \ -f ../../../include/uapi/linux/bpf_common.h This corrects the location of the tests. Signed-off-by: Daniel Díaz Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1502814810-960-1-git-send-email-daniel.diaz@linaro.org Signed-off-by: Arnaldo Carvalho de Melo