kernel/linux.git/tools/build/Makefile.feature, branch v6.19.11

tools/build: Add a feature test for libopenssl

2025-12-17T13:44:24+00:00

It's used by bpftool and the kernel build. Let's add a feature test so that perf can decide what to do based on the availability. Signed-off-by: Namhyung Kim

Merge tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

2025-12-07T15:07:02+00:00

Pull perf tools updates from Namhyung Kim: "Perf event/metric description: Unify all event and metric descriptions in JSON format. Now event parsing and handling is greatly simplified by that. From users point of view, perf list will provide richer information about hardware events like the following. $ perf list hw List of pre-defined events (to be used in -e or -M): legacy hardware: branch-instructions [Retired branch instructions [This event is an alias of branches]. Unit: cpu] branch-misses [Mispredicted branch instructions. Unit: cpu] branches [Retired branch instructions [This event is an alias of branch-instructions]. Unit: cpu] bus-cycles [Bus cycles,which can be different from total cycles. Unit: cpu] cache-misses [Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. Unit: cpu] cache-references [Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include prefetches and coherency messages; again this depends on the design of your CPU. Unit: cpu] cpu-cycles [Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cycles]. Unit: cpu] cycles [Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cpu-cycles]. Unit: cpu] instructions [Retired instructions. Be careful,these can be affected by various issues,most notably hardware interrupt counts. Unit: cpu] ref-cycles [Total cycles; not affected by CPU frequency scaling. Unit: cpu] But most notable changes would be in the perf stat. On the right side, the default metrics are better named and aligned. :) $ perf stat -- perf test -w noploop Performance counter stats for 'perf test -w noploop': 11 context-switches # 10.8 cs/sec cs_per_second 0 cpu-migrations # 0.0 migrations/sec migrations_per_second 3,612 page-faults # 3532.5 faults/sec page_faults_per_second 1,022.51 msec task-clock # 1.0 CPUs CPUs_utilized 110,466 branch-misses # 0.0 % branch_miss_rate (88.66%) 6,934,452,104 branches # 6781.8 M/sec branch_frequency (88.66%) 4,657,032,590 cpu-cycles # 4.6 GHz cycles_frequency (88.65%) 27,755,874,218 instructions # 6.0 instructions insn_per_cycle (89.03%) TopdownL1 # 0.3 % tma_backend_bound # 9.3 % tma_bad_speculation (89.05%) # 9.7 % tma_frontend_bound (77.86%) # 80.7 % tma_retiring (88.81%) 1.025318171 seconds time elapsed 1.013248000 seconds user 0.012014000 seconds sys Deferred unwinding support: With the kernel support (commit c69993ecdd4d: "perf: Support deferred user unwind"), perf can use deferred callchains for userspace stack trace with frame pointers like below: $ perf record --call-graph fp,defer ... This will be transparent to users when it comes to other commands like perf report and perf script. They will merge the deferred callchains to the previous samples as if they were collected together. ARM SPE updates - Extensive enhancements to support various kinds of memory operations including GCS, MTE allocation tags, memcpy/memset, register access, and SIMD operations. - Add inverted data source filter (inv_data_src_filter) support to exclude certain data sources. - Improve documentation. Vendor event updates: - Intel: Updated event files for Sierra Forest, Panther Lake, Meteor Lake, Lunar Lake, Granite Rapids, and others. - Arm64: Added metrics for i.MX94 DDR PMU and Cortex-A720AE definitions. - RISC-V: Added JSON support for T-HEAD C920V2. Misc: - Improve pointer tracking in data type profiling. It'd give better output when the variable is using container_of() to convert type. - Annotation support for perf c2c report in TUI. Press 'a' key to enter annotation view from cacheline browser window. This will show which instruction is causing the cacheline contention. - Lots of fixes and test coverage improvements!" * tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (214 commits) libperf: Use 'extern' in LIBPERF_API visibility macro perf stat: Improve handling of termination by signal perf tests stat: Add test for error for an offline CPU perf stat: When no events, don't report an error if there is none perf tests stat: Add "--null" coverage perf cpumap: Add "any" CPU handling to cpu_map__snprint_mask libperf cpumap: Fix perf_cpu_map__max for an empty/NULL map perf stat: Allow no events to open if this is a "--null" run perf test kvm: Add some basic perf kvm test coverage perf tests evlist: Add basic evlist test perf tests script dlfilter: Add a dlfilter test perf tests kallsyms: Add basic kallsyms test perf tests timechart: Add a perf timechart test perf tests top: Add basic perf top coverage test perf tests buildid: Add purge and remove testing perf tests c2c: Add a basic c2c perf c2c: Clean up some defensive gets and make asan clean perf jitdump: Fix missed dso__put perf mem-events: Don't leak online CPU map perf hist: In init, ensure mem_info is put on error paths ...

tool build: Remove annoying newline in build output

2025-11-21T14:30:07+00:00

Remove the newline which is printed during feature discovery when nothing else is printed. Signed-off-by: Alexandre Chartre Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Link: https://patch.msgid.link/20251121095340.464045-5-alexandre.chartre@oracle.com

tool build: Remove __get_cpuid feature test

2025-11-14T07:03:11+00:00

This feature test is no longer used so remove. The function tested by the feature test is used in: tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c however, the Makefile just assumes the presence of the function and doesn't perform a build feature test for it. Signed-off-by: Ian Rogers Reviewed-by: James Clark Signed-off-by: Namhyung Kim

tools build: Remove libbpf-strings feature test

2025-10-03T19:49:51+00:00

The feature test is unnecessary as the LIBBPF_CURRENT_VERSION_GEQ(1,7) macro can be used instead. The only use was in perf and this is now removed. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Blake Jones Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Signed-off-by: Arnaldo Carvalho de Melo

tools build: Remove get_current_dir_name feature check

2025-10-03T19:49:11+00:00

As perf no longer tests for this feature, and it was the only user, remove the feature test. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra [ Remove the call to main_test_get_current_dir_name() from main() in test-all.c, otherwise it will always fail ] Signed-off-by: Arnaldo Carvalho de Melo

tools build: Don't assume libtracefs-devel is always available

2025-10-02T16:11:27+00:00

perf doesn't use libtracefs and so it doesn't make sense to assume it is always available when building test-all.bin, defeating the feature check speedup it provides. The other tools/build/ users such as rtla, rv, etc call $(feature_check libtracefs) to check its availability instead of using the test-all.bin mechanism, stopping the build and asking for libtracefs-devel to be installed. Remove it from FEATURE_TESTS_BASIC to not have it as available, as noted by Ian Rogers during review. Reviewed-by: Ian Rogers Acked-by: Tomas Glozar Cc: Adrian Hunter Cc: Gabriele Monaco Cc: James Clark Cc: Jiri Olsa Cc: Kan Liang Cc: Namhyung Kim Cc: Steven Rostedt Signed-off-by: Arnaldo Carvalho de Melo

tools build: Make libperl opt-in rather than opt-out, deprecate

2025-09-19T19:07:21+00:00

If libperl is installed then the perf tool build will build against it. There appears to be limited interest in the scripting support for perl so let's make it opt-in and deprecate it. With this patch applied you need to add LIBPERL=1 to get libperl support in perf - there is no warning if libperl is missing, but building will fail if libperl is missing and the build has LIBPERL=1. The perf version output is changed to: ``` $ perf version --build-options perf version 6.17.rc3.g8eca69269947 aio: [ on ] # HAVE_AIO_SUPPORT bpf: [ on ] # HAVE_LIBBPF_SUPPORT bpf_skeletons: [ on ] # HAVE_BPF_SKEL debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT dwarf: [ on ] # HAVE_LIBDW_SUPPORT dwarf_getlocations: [ on ] # HAVE_LIBDW_SUPPORT dwarf-unwind: [ on ] # HAVE_DWARF_UNWIND_SUPPORT auxtrace: [ on ] # HAVE_AUXTRACE_SUPPORT libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT ( tip: Deprecated, license incompatibility, use BUILD_NONDISTRO=1 and install binutils-dev[el] ) libbpf-strings: [ on ] # HAVE_LIBBPF_STRINGS_SUPPORT libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT libdw-dwarf-unwind: [ on ] # HAVE_LIBDW_SUPPORT libelf: [ on ] # HAVE_LIBELF_SUPPORT libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT libopencsd: [ OFF ] # HAVE_CSTRACE_SUPPORT libperl: [ OFF ] # HAVE_LIBPERL_SUPPORT ( tip: Deprecated, use LIBPERL=1 and install libperl-dev to build with it ) libpfm4: [ on ] # HAVE_LIBPFM libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT libslang: [ on ] # HAVE_SLANG_SUPPORT libtraceevent: [ on ] # HAVE_LIBTRACEEVENT libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip: Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to build with it ) lzma: [ on ] # HAVE_LZMA_SUPPORT numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT zlib: [ on ] # HAVE_ZLIB_SUPPORT zstd: [ on ] # HAVE_ZSTD_SUPPORT ``` i.e. there is a tip saying about deprecation and how to get support back. Signed-off-by: Ian Rogers Tested-by: Arnaldo Carvalho de Melo Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Charlie Jenkins Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: Kan Liang Cc: Leo Yan Cc: Mark Rutland Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Quentin Monnet Cc: Steven Rostedt (VMware) Cc: Tomas Glozar Cc: Yuzhuo Jing Link: https://lore.kernel.org/lkml/aMrk03gigBlGcYLK@x1/ Link: https://lore.kernel.org/lkml/CAP-5=fVX+bLBRJCiziDi_hBySgv2NFtDoghtpheSSxVAvvETGw@mail.gmail.com [ Keep the pre-existing perl-ExtUtils-Embed hint for Fedora/RHEL systems ] Signed-off-by: Arnaldo Carvalho de Melo

tools: Remove libcrypto dependency

2025-06-26T17:51:41+00:00

Remove all occurrence of libcrypto in the build system. Signed-off-by: Yuzhuo Jing Signed-off-by: Eric Biggers Reviewed-by: Ian Rogers Link: https://lore.kernel.org/r/20250625202311.23244-5-ebiggers@kernel.org Signed-off-by: Namhyung Kim

perf build: detect support for libbpf's emit_strings option

2025-06-20T21:48:14+00:00

This creates a config option that detects libbpf's ability to display character arrays as strings, which was just added to the BPF tree (https://git.kernel.org/bpf/bpf-next/c/87c9c79a02b4). To test this change, I built perf (from later in this patch set) with: - static libbpf (default, using source from kernel tree) - dynamic libbpf (LIBBPF_DYNAMIC=1 LIBBPF_INCLUDE=/usr/local/include) For both the static and dynamic versions, I used headers with and without the ".emit_strings" option. I verified that of the four resulting binaries, the two with ".emit_strings" would successfully record BPF_METADATA events, and the two without wouldn't. All four binaries would successfully display BPF_METADATA events, because the relevant bit of libbpf code is only used during "perf record". Signed-off-by: Blake Jones Link: https://lore.kernel.org/r/20250612194939.162730-2-blakejones@google.com Signed-off-by: Namhyung Kim