kernel/linux.git/sound, branch v7.0.11

ASoC: cs-amp-lib: Fix missing dput() after debugfs_lookup()

2026-06-01T15:54:53+00:00

[ Upstream commit ba28a07a9a0b53a538c809e04e517e1ce1f1bee3 ] Rewrite cs_amp_create_debugfs() so that dput() will be called on a valid dentry returned from debugfs_lookup(). The pointer returned from debugfs_lookup() must be released by dput(). The pointer returned from debugfs_create_dir() does not need to be passed to dput(). Signed-off-by: Richard Fitzgerald Fixes: cdd27fa3298a ("ASoC: cs-amp-lib: Add helpers for factory calibration") Link: https://patch.msgid.link/20260521122511.987322-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: cs-amp-lib: Fix wrong sizeof() in _cs_amp_set_efi_calibration_data()

2026-06-01T15:54:53+00:00

[ Upstream commit 67a52d3ebb5a0ae0c0e23ffa99470d9463179c9f ] When calculating data->count replace the incorrect sizeof(data) with use of struct_offset(). The faulty sizeof(data) was incorrectly calculating the size of the pointer instead of the size of the struct pointed to. As it happens, both values are 8 on a 64-bit CPU. In the unlikely event of using this code on a 32-bit CPU the number of available bytes would be calculated 4 larger than is actually available. Instead of changing to sizeof(*data) it has been replaced by struct_offset() because it has better chance of detecting these sorts of typos. Also the offset of the data[] array is actually what we want to know here anyway. Signed-off-by: Richard Fitzgerald Fixes: 2b62e66626f0 ("ASoC: cs-amp-lib: Add function to write calibration to UEFI") Link: https://patch.msgid.link/20260521122511.987322-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove()

2026-06-01T15:54:53+00:00

[ Upstream commit 18e7bd9f2446664053f8c34b72abd4606d22d858 ] Use flush_work() instead of cancel_work_sync() to terminate pending IRQ work in cs35l56_sdw_remove(). And flush_work() again after masking the interrupts to flush any queueing that was racing with the masking. This is the same sequence as cs35l56_sdw_system_suspend(). cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering- down before the interrupt status can be read and handled. The work releases this pm_runtime. So cancelling it, instead of flushing, could leave an unbalanced pm_runtime. Signed-off-by: Richard Fitzgerald Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ALSA: seq: Serialize UMP output teardown with event_input

2026-06-01T15:54:51+00:00

[ Upstream commit 60a1969fae6209644698fca91c185d153674f631 ] seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero. 2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file. 3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime. This keeps the output substream and runtime alive for the full event_input write while keeping rawmidi release outside the rwlock. KASAN reproduced this as a slab-use-after-free in snd_rawmidi_kernel_write1(), with allocation through seq_ump_use()/snd_seq_port_connect() and free through seq_ump_unuse()/snd_seq_port_disconnect(). Suggested-by: Takashi Iwai Validation reproduced this kernel report: KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400 RIP: 0033:0x7f5528af837f Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device") Signed-off-by: Zhang Cen Link: https://patch.msgid.link/20260520103249.3048345-1-rollkingzzc@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ASoC: soc-utils: Add missing va_end in snd_soc_ret()

2026-06-01T15:54:49+00:00

[ Upstream commit 298a43b54432fbc3a32949a94c72544ee18c8c00 ] The default case in snd_soc_ret() use va_start without va_end to cleanup "args" object which can cause undefined behavior. So, add missing va_end to cleanup "args" object. This is reported by Coverity Scan as "Missing varargs init or cleanup". Fixes: 943116ba2a6a ("ASoC: add common snd_soc_ret() and use it") Signed-off-by: Robertus Diawan Chris Link: https://patch.msgid.link/20260519054024.274741-1-robertusdchris@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ALSA: hda/realtek: Use ALC287_FIXUP_TXNW2781_I2C for ASUS Strix Gxx5

2026-06-01T15:54:46+00:00

[ Upstream commit 4372286ac774536e8e68bc6dfa0f0b0152b31fce ] These devices were incorrectly using the ALC287_FIXUP_TAS2781_I2C quirk leading to errors: [ 18.765990] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found [ 18.768153] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found [ 18.768476] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found [ 18.768899] Serial bus multi instantiate pseudo device driver TXNW2781:00: Instantiated 3 I2C devices. Use the ALC287_FIXUP_TXNW2781_I2C quirk instead to fix this and restore speaker audio on affected devices. Fixes: 1e9c708dc3ae ("ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects") Link: https://lore.kernel.org/59fd4aa4-76b9-4984-8db9-a60e55ec6e80@losource.net/ Closes: https://lore.kernel.org/CACB9z7kjs8rhLstEc8fV29BCTb5dd881JwGozoKdO5cwCb=YwQ@mail.gmail.com Signed-off-by: Eric Naim Link: https://patch.msgid.link/20260516111532.111463-1-dnaim@cachyos.org Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ASoC: amd: acp-sdw-legacy: check CPU DAI name before logging

2026-06-01T15:54:45+00:00

[ Upstream commit 1afd8f06dcb1d561af3b239c5b14a88b87c13454 ] devm_kasprintf() can fail and return NULL. The legacy AMD SoundWire machine driver logs cpus->dai_name before checking the allocation result. Move the debug print after the NULL check, matching the ordering used by the SOF AMD SoundWire path after commit 5726b68473f7 ("ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails"). Fixes: 2981d9b0789c ("ASoC: amd: acp: add soundwire machine driver for legacy stack") Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260511-asoc-amd-acp-sdw-legacy-dai-name-null-v1-1-dc6151b6da8a@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ALSA: hda/ca0132: Disable auto-detect on manual output select

2026-06-01T15:54:45+00:00

[ Upstream commit 6fd9f6e870ea285f05102e8e00e6a7f4495a9a02 ] Commit 778031e1658d ("ALSA: hda/ca0132: Set HP/Speaker auto-detect default from headphone pin verb") enables HP/Speaker auto-detect by default when the headphone pin supports presence detect. With auto-detect enabled, ca0132_select_out() and ca0132_alt_select_out() choose the output from jack presence instead of the manual HP/Speaker selection. This means selecting speaker output while headphones are plugged in updates the control state, but audio still routes to the headphones. Treat an explicit manual output selection as a request to leave auto-detect mode. Clear the HP/Speaker auto-detect switch before applying the manual selection, and notify userspace so the auto-detect control state is updated in mixers. Do this for both the normal HP/Speaker Playback Switch and the alternate Output Select control used by desktop cards. This keeps auto-detect enabled by default for devices with jack presence detection, while preserving the expected behavior that a manual output choice takes effect immediately. Fixes: 778031e1658d ("ALSA: hda/ca0132: Set HP/Speaker auto-detect default from headphone pin verb") Signed-off-by: Matt DeVillier Link: https://lore.kernel.org/CAFTm+6AfeXKf=b2frG4xC5yC4jjM9TkD6c8+dOWWFw6BDjDESw@mail.gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ALSA: scarlett2: Add missing error check when initialise Autogain Status

2026-06-01T15:54:45+00:00

[ Upstream commit c0e4fffc0f474b7ed10adee4ab2bc1a66d36fc72 ] When initialise new control with scarlett2_add_new_ctl() function for Autogain Status, scarlett2_add_new_ctl() might throw an error. So, add error check after initialise new control for Autogain Status. This is reported by Coverity Scan with CID 1598781 as UNUSED_VALUE. Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Signed-off-by: Robertus Diawan Chris Link: https://patch.msgid.link/20260508033914.111596-1-robertusdchris@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ASoC: codecs: fs210x: fix possible buffer overflow

2026-06-01T15:54:44+00:00

[ Upstream commit 0d435a7ebcd4e97e47673c1ab6fb27f973a053ec ] In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST) Fixes: 756117701779 ("ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver") Signed-off-by: Alexander A. Klimov Link: https://patch.msgid.link/20260513190852.196723-2-grandmaster@al2klimov.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin