kernel/linux.git/sound/usb, branch v6.2-rc2

ALSA: line6: fix stack overflow in line6_midi_transmit

2022-12-26T08:07:49+00:00

Correctly calculate available space including the size of the chunk buffer. This fixes a buffer overflow when multiple MIDI sysex messages are sent to a PODxt device. Signed-off-by: Artem Egorkine Cc: Link: https://lore.kernel.org/r/20221225105728.1153989-2-arteme@gmail.com Signed-off-by: Takashi Iwai

ALSA: line6: correct midi status byte when receiving data from podxt

2022-12-26T08:06:19+00:00

A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0 status byte. This is usually corrected by the driver on other OSes. This fixes MIDI sysex messages sent by PODxt. [ tiwai: fixed white spaces ] Signed-off-by: Artem Egorkine Cc: Link: https://lore.kernel.org/r/20221225105728.1153989-1-arteme@gmail.com Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless

2022-12-22T08:13:54+00:00

It seems that the firmware is broken and does not accept the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz) available in the descriptors for the output endpoint. Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup when only one rate is available (fixed). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216798 Signed-off-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20221215153037.1163786-1-perex@perex.cz Signed-off-by: Takashi Iwai

ALSA: usb-audio: add the quirk for KT0206 device

2022-12-07T12:25:35+00:00

Add relevant information to the quirks-table.h file. The test passes and the sound source file plays normally. Signed-off-by: wangdicheng Cc: Link: https://lore.kernel.org/r/SG2PR02MB587849631CB96809CF90DBED8A1A9@SG2PR02MB5878.apcprd02.prod.outlook.com Signed-off-by: Takashi Iwai

ALSA: usb-audio: Workaround for XRUN at prepare

2022-12-05T13:22:48+00:00

Under certain situations (typically in the implicit feedback mode), USB-audio driver starts a playback stream already at PCM prepare call even before the actual PCM trigger-START call. For implicit feedback mode, this effectively starts two streams for data and sync endpoints, and if a coupled sync stream gets XRUN at this point, it results in an error -EPIPE. The problem is that currently we return -EPIPE error as is from the prepare. Then application tries to recover again via the prepare call, but it'll fail again because the sync-stop is missing. The sync-stop is missing because it's an internal trigger call (hence the PCM core isn't involved). Since we'll need to re-issue the prepare in anyway when trapped into this pitfall, this patch attempts to address it in a bit different way; namely, the driver tries to prepare once again after syncing the stop manually by itself -- so applications don't see the internal error. At the second failure, we report the error as is, but this shouldn't happen in normal situations. Reported-and-tested-by: Carl Hetherington Cc: Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net Link: https://lore.kernel.org/r/20221205132124.11585-4-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add quirk for Tascam Model 12

2022-11-29T14:04:17+00:00

Tascam's Model 12 is a mixer which can also operate as a USB audio interface. The audio interface uses explicit feedback but it seems that it does not correctly handle missing isochronous frames. When injecting an xrun (or doing anything else that pauses the playback stream) the feedback rate climbs (for example, at 44,100Hz nominal, I see a stable rate around 44,099 but xrun injection sees this peak at around 44,135 in most cases) and glitches are heard in the audio stream for several seconds - this is significantly worse than the single glitch expected for an underrun. While the stream does normally recover and the feedback rate returns to a stable value, I have seen some occurrences where this does not happen and the rate continues to increase while no audio is heard from the output. I have not found a solid reproduction for this. This misbehaviour can be avoided by totally resetting the stream state by switching the interface to alt 0 and back before restarting the playback stream. Add a new quirk flag which forces the endpoint and interface to be reconfigured whenever the stream is stopped, and use this for the Tascam Model 12. Separate interfaces are used for the playback and capture endpoints, so resetting the playback interface here will not affect the capture stream if it is running. While there are two endpoints on the interface, these are the OUT data endpoint and the IN explicit feedback endpoint corresponding to it and these are always stopped and started together. Signed-off-by: John Keeping Link: https://lore.kernel.org/r/20221129130100.1257904-1-john@metanate.com Signed-off-by: Takashi Iwai

ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()

2022-11-12T14:13:01+00:00

snd_usbmidi_output_open() has a check of the NULL port with snd_BUG_ON(). snd_BUG_ON() was used as this shouldn't have happened, but in reality, the NULL port may be seen when the device gives an invalid endpoint setup at the descriptor, hence the driver skips the allocation. That is, the check itself is valid and snd_BUG_ON() should be dropped from there. Otherwise it's confusing as if it were a real bug, as recently syzbot stumbled on it. Reported-by: syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20221112141223.6144-1-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue

2022-11-10T06:50:30+00:00

For Hamedal C20, the current rate is different from the runtime rate, snd_usb_endpoint stop and close endpoint to resetting rate. if snd_usb_endpoint close the endpoint, sometimes usb will disconnect the device. Signed-off-by: Ai Chao Link: https://lore.kernel.org/r/20221110063452.295110-1-aichao@kylinos.cn Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add DSD support for Accuphase DAC-60

2022-11-09T06:24:30+00:00

Accuphase DAC-60 option card supports native DSD up to DSD256, but doesn't have support for auto-detection. Explicitly enable DSD support for the correct altsetting. Signed-off-by: Jussi Laako Cc: Link: https://lore.kernel.org/r/20221108221241.1220878-1-jussi@sonarnerd.net Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add quirk entry for M-Audio Micro

2022-11-08T14:07:49+00:00

M-Audio Micro (0762:201a) defines the descriptor as vendor-specific, while the content seems class-compliant. Just overriding the probe makes the device working. Reported-by: Ash Logan Cc: Link: https://lore.kernel.org/r/7ecd4417-d860-4773-c1c1-b07433342390@heyquark.com Link: https://lore.kernel.org/r/20221108140721.24248-1-tiwai@suse.de Signed-off-by: Takashi Iwai