kernel/linux.git/sound/soc, branch v5.10.259

ASoC: qcom: q6asm-dai: do not set stream state in event and trigger callbacks

2026-06-19T11:21:30+00:00

commit cee3e63e7106c3c81b2053371fdf14240bfba2fc upstream. The q6asm-dai stream state is used by prepare() to decide whether an existing stream setup needs to be closed before opening/configuring a new one. Updating the state from trigger or asynchronous DSP callbacks can make that state stale or incorrect relative to the actual setup lifetime. In particular, setting Q6ASM_STREAM_STOPPED on STOP or EOS completion can make prepare() believe there is no active setup to close, which can result in opening/configuring the same stream more than once. Keep stream state updates tied to prepare(), where the stream is actually closed and reopened, and stop changing it from trigger and EOS callbacks. Fixes: bfbb12dfa144 ("ASoC: qcom: q6asm-dai: perform correct state check before closing") Cc: Stable@vger.kernel.org Closes: https://lore.kernel.org/all/afS7rTHdc9TyIeLx@rdacayan/ Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-2-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: qcom: q6asm-dai: close stream only when running

2026-06-19T11:21:30+00:00

commit 048c540ee76ded666bda74f9dae1ca3254e0633c upstream. q6asm_dai_close() and q6asm_dai_compr_free() currently issue CMD_CLOSE whenever prtd->state is non-zero. After prepare() closes an existing stream, the state is updated to Q6ASM_STREAM_STOPPED. Since this state is also non-zero, the close and free paths can send CMD_CLOSE again for a stream that has already been closed. Restrict CMD_CLOSE to the Q6ASM_STREAM_RUNNING state so the command is sent only when the ASM stream is still active. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-3-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: qcom: q6asm-dai: fix error handling in prepare and set_params

2026-06-19T11:21:29+00:00

commit 4b4db09f283df65d780bc7cee66cb4a7e9bf4770 upstream. Fix error handling in q6asm_dai_compr_set_params() and q6asm_dai_prepare() for both CMD_CLOSE and q6asm_unmap_memory_regions(). In both the functions, we are doing q6asm_audio_client_free in failure cases, which means if prepare or set_params fail, we can never recover. Now open and close are done in respective dai_open/close functions. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-4-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: Intel: bytcht_es8316: Fix MCLK leak on init errors

2026-06-19T11:21:25+00:00

[ Upstream commit afb2a3a9d8369d18122a0d7cd294eba9a98259c6 ] byt_cht_es8316_init() enables MCLK before configuring the codec sysclk and creating the headset jack. If either of those later steps fails, the function returns without disabling MCLK, leaving the clock enabled after card registration fails. Track whether this driver enabled MCLK and disable it on the init error paths. Add the matching DAI link exit callback so the same clock enable is also balanced when ASoC cleans up a successfully initialized link. Fixes: a03bdaa565cb ("ASoC: Intel: add machine driver for BYT/CHT + ES8316") Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260519-asoc-bytcht-es8316-mclk-leak-v1-1-b4a11cdc2afd@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: codecs: ab8500: Fix casting of private data

2026-06-01T15:29:45+00:00

[ Upstream commit a201aef1a88b675e9eb8487e27d14e2eef3cef80 ] ab8500_filter_controls[i].private_value is initialized using .private_value = (unsigned long)&(struct filter_control) {.count = xcount, .min = xmin, .max = xmax} thus it's a pointer to a struct filter_control casted to unsigned long. So to get back that pointer .private_data must be cast back, not its address. Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver") Signed-off-by: Christian A. Ehrhardt Signed-off-by: Uwe Kleine-König (The Capable Hub) Link: https://patch.msgid.link/20260428192255.2294705-2-u.kleine-koenig@baylibre.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: fsl_easrc: Change the type for iec958 channel status controls

2026-06-01T15:29:34+00:00

[ Upstream commit 47f28a5bd154a95d5aa563dde02a801bd32ddb81 ] Use the type SNDRV_CTL_ELEM_TYPE_IEC958 for iec958 channel status controls, the original type will cause mixer-test to iterate all 32bit values, which costs a lot of time. And using IEC958 type can reduce the control numbers. Also enable pm runtime before updating registers to make the regmap cache data align with the value in hardware. Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers") Signed-off-by: Shengjiu Wang Link: https://patch.msgid.link/20260401094226.2900532-12-shengjiu.wang@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: fsl_easrc: Fix value type in fsl_easrc_iec958_get_bits()

2026-06-01T15:29:33+00:00

[ Upstream commit aa21fe4a81458cf469c2615b08cbde5997dde25a ] The value type of controls "Context 0 IEC958 Bits Per Sample" should be integer, not enumerated, the issue is found by the mixer-test. Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers") Signed-off-by: Shengjiu Wang Link: https://patch.msgid.link/20260401094226.2900532-11-shengjiu.wang@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: fsl_easrc: Check the variable range in fsl_easrc_iec958_put_bits()

2026-06-01T15:29:33+00:00

[ Upstream commit 00541b86fb578d4949cfdd6aff1f82d43fcf07af ] Add check of input value's range in fsl_easrc_iec958_put_bits(), otherwise the wrong value may be written from user space. Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers") Signed-off-by: Shengjiu Wang Link: https://patch.msgid.link/20260401094226.2900532-10-shengjiu.wang@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: sti: use managed regmap_field allocations

2026-06-01T15:29:32+00:00

[ Upstream commit 1696fad8b259a2d46e51cd6e17e4bcdbe02279fa ] The regmap_field objects allocated at player init are never freed and may leak resources if the driver is removed. Switch to devm_regmap_field_alloc() to automatically limit the lifetime of the allocations the lifetime of the device. Fixes: 76c2145ded6b ("ASoC: sti: Add CPU DAI driver for playback") Signed-off-by: Sander Vanheule Link: https://patch.msgid.link/20260220152634.480766-3-sander@svanheule.net Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: sti: Return errors from regmap_field_alloc()

2026-06-01T15:29:31+00:00

[ Upstream commit 272aabef50bc3fe58edd26de000f4cdd41bdbe60 ] When regmap_field_alloc() fails, it can return an error. Specifically, it will return PTR_ERR(-ENOMEM) when the allocation returns a NULL pointer. The code then uses these allocations with a simple NULL check: if (player->clk_sel) { // May dereference invalid pointer (-ENOMEM) err = regmap_field_write(player->clk_sel, ...); } Ensure initialization fails by forwarding the errors from regmap_field_alloc(), thus avoiding the use of the invalid pointers. Fixes: 76c2145ded6b ("ASoC: sti: Add CPU DAI driver for playback") Signed-off-by: Sander Vanheule Link: https://patch.msgid.link/20260220152634.480766-2-sander@svanheule.net Signed-off-by: Mark Brown Signed-off-by: Sasha Levin