kernel/linux.git/sound/soc/sof/ipc4-control.c, branch v7.0.10

ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control

2026-02-09T12:27:28+00:00

Return -EINVAL in case the scontrol contains more data than the amount of space available for it to store in sof_ipc4_refresh_bytes_control(). Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-sound/aYXvFr-LVHVJSvS7@stanley.mountain/ Fixes: 2a28b5240f2b ("ASoC: SOF: ipc4-control: Add support for generic bytes control") Signed-off-by: Peter Ujfalusi Link: https://patch.msgid.link/20260209120239.6066-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-control: Add support for generic bytes control

2025-12-17T16:35:51+00:00

The generic byte control can be used in cases when the bytes data can be changed by the firmware and it sends a notification about the change, similarly to the enum and switch controls. The generic control support is needed as from the param_id itself it is not possible to know which control has changed. The needed information is only available via generic control change notification. Generic bytes controls use param_id 202 and their change notification can contain payload with the change embedded or just the header message as notification. Signed-off-by: Peter Ujfalusi Reviewed-by: Seppo Ingalsuo Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen Link: https://patch.msgid.link/20251217143945.2667-9-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-control: Keep the payload size up to date

2025-12-17T16:35:47+00:00

When the bytes data is read from the firmware, the size of the payload can be different than what it was previously. For example when the topology did not contained payload data at all for the control, the data size was 0. For get operation allow maximum size of payload to be read and then update the sizes according to the completed message. Similarly, keep the size in sync when updating the data in firmware. With the change we will be able to read data from firmware for bytes controls which did not had initial payload defined in topology. Fixes: a062c8899fed ("ASoC: SOF: ipc4-control: Add support for bytes control get and put") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi Reviewed-by: Seppo Ingalsuo Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen Link: https://patch.msgid.link/20251217143945.2667-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-control: Use the correct size for scontrol->ipc_control_data

2025-12-17T16:35:46+00:00

The size of the data behind scontrol->ipc_control_data is stored in scontrol->size, use this when copying data for backup/restore. Fixes: db38d86d0c54 ("ASoC: sof: Improve sof_ipc4_bytes_ext_put function") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi Reviewed-by: Seppo Ingalsuo Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen Link: https://patch.msgid.link/20251217143945.2667-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-control: If there is no data do not send bytes update

2025-12-17T16:35:44+00:00

When the bytes control have no data (payload) then there is no need to send an IPC message as there is nothing to send. Fixes: a062c8899fed ("ASoC: SOF: ipc4-control: Add support for bytes control get and put") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi Reviewed-by: Seppo Ingalsuo Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen Link: https://patch.msgid.link/20251217143945.2667-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-control: Use SOF_CTRL_CMD_BINARY as numid for bytes_ext

2025-05-09T09:20:13+00:00

The header.numid is set to scontrol->comp_id in bytes_ext_get and it is ignored during bytes_ext_put. The use of comp_id is not quite great as it is kernel internal identification number. Set the header.numid to SOF_CTRL_CMD_BINARY during get and validate the numid during put to provide consistent and compatible identification number as IPC3. For IPC4 existing tooling also ignored the numid but with the use of SOF_CTRL_CMD_BINARY the different handling of the blobs can be dropped, providing better user experience. Reported-by: Seppo Ingalsuo Closes: https://github.com/thesofproject/linux/issues/5282 Fixes: a062c8899fed ("ASoC: SOF: ipc4-control: Add support for bytes control get and put") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi Reviewed-by: Seppo Ingalsuo Reviewed-by: Ranjani Sridharan Reviewed-by: Liam Girdwood Link: https://patch.msgid.link/20250509085633.14930-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: Intel: clarify Copyright information

2024-05-06T14:59:35+00:00

For some reason a number of files included the "All rights reserved" statement. Good old copy-paste made sure this mistake proliferated. Remove the "All rights reserved" in all Intel-copyright to align with internal guidance. Reviewed-by: Cezary Rojewski Signed-off-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Péter Ujfalusi Link: https://lore.kernel.org/r/20240503140359.259762-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown

Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2024-01-08T07:18:02+00:00

ASoC: Updates for v6.8 This is a relatively quiet release, there's a lot of driver specific changes and the usual high level of activity in the SOF core but the one big core change was Mormioto-san's work to support more N:M CPU:CODEC mapping cases. Highlights include: - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2. - Support for falling back to older SOF IPC versions where firmware for new versions is not available. - Support for notification of control changes generated by SOF firmware with IPC4. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases). - ACPI parsing support for the ES83xx driver, reducing the number of quirks neede for x86 systems. - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100. - Removal of Freescale MPC8610 support, the SoC is no longer supported by Linux.

ASoC: SOF: ipc4-topology: Correct data structures for the GAIN module

2023-12-01T14:13:03+00:00

Move the base_cfg to struct sof_ipc4_gain_data. This struct describes the message payload passed to the firmware via the mailbox. It is not wise to be 'clever' and try to use the first part of a struct as IPC message without marking the message section as packed and aligned. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-control: Implement control update for switch/enum controls

2023-11-24T15:38:00+00:00

Implement the sof_ipc_tplg_control_ops.update function to support a control change notification from the firmware on switch or enum control types. Based on the module notification message content, look up the swidget, then the scontrol which was the source of the notification then if the message contains the changed values update the cached values. If only a notification without values received, marked the control as dirty and on next read access fetch the new values from the firmware. Signed-off-by: Peter Ujfalusi Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20231124150853.18648-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown